| JEDIDIAH__ | is there any way to define a recording anti-rule? ensure that a particular show is NEVER recorded, even if it might satisfy a different rule (like "never record Southpart")? | 01:05 |
|---|---|---|
| rhpot1991 | JEDIDIAH__: setup your recording rules better | 01:06 |
| rhpot1991 | I'm not sure why the situation would ever arise | 01:07 |
| JEDIDIAH__ | simple discrete postitive and negative rules would be "better" | 01:26 |
| Gadu | I'm making a mythbuntu front-end machine and I have the choice between either DDR3 1066 w/ Timing 7-7-7-20 or DDR3 1333 w/ Timing 9-9-9-24 | 02:05 |
| Gadu | same price either way | 02:05 |
| mrand | DDR3 is an overkill for any frontend - i.e., it doesn't matter either way ;-) | 02:09 |
| Gadu | heh | 02:11 |
| mrand | Does your processor even support 1333? If not, then go 1066. | 02:11 |
| Gadu | board and cpu support 1066, 1333, and 1600 | 02:13 |
| mrand | It would take a VERY heavy duty application to notice a difference - something unlikely to be run on a home machine. But I'd probably go for the 1333 because it might be easier to trade or sell to someone in the future. | 02:26 |
| rhpot1991 | go with whatever the ion bundle comes with for free :) | 02:32 |
| Gadu | the 1066 is 0.185 nanoseconds better than the 1333 --_-- | 02:38 |
| Gadu | what is the ion bundle? | 02:39 |
| mrand | Gadu: just to point out the obvious in case you weren't joking: you have that backwards... it is 185 psec worse than 1333 | 02:42 |
| JEDIDIAH__ | it doesn't matter. best to make sure it will work well with the motherboard. some boards can be finicky | 02:43 |
| Gadu | nar, I had that right. the 1066 with Cas Latency 7 is 0.185 nanoseconds faster than the 1333 with Cas Latency 9 | 02:43 |
| mrand | ok. I thought you were just comparing 1066 MHz to 1333 MHz. Gadu: http://en.wikipedia.org/wiki/Nvidia_Ion | 02:44 |
| Gadu | ah XD, and thanks for link | 02:44 |
| rileyp | what is the latest db schema version Im on 1254 | 07:24 |
| rileyp | My version of myth is 0.23.0 +fixes 24158 | 07:27 |
| kpkarl | !help | 08:42 |
| Zinn | !help For a complete list of my knowledge visit: http://www.baablogic.net/Zinn.cgi Other available commands: !status, !about, !bug [bug_number]. | 08:42 |
| === croppa_ is now known as croppa | ||
| qwebirc23794 | Banging my head on a new 10.04 install. Hauppage PVR 150 - I can't get into LiveTV mode. Must be my capture card setup, but I can't grok it. | 19:06 |
| qwebirc23794 | Backend has following log output which I think is indicative of the problem | 19:07 |
| qwebirc23794 | 2010-10-28 14:04:40.260 TVRec(1): Changing from None to WatchingLiveTV | 19:07 |
| qwebirc23794 | 2010-10-28 14:04:40.365 Channel(/dev/video0) Error: GetCurrentChannelNum(300): Failed to find Channel | 19:07 |
| qwebirc23794 | 2010-10-28 14:04:40.369 Channel(/dev/video0)::TuneTo(300): Error, failed to find channel. | 19:07 |
| qwebirc23794 | pastebin of complete log snippet: http://mythbuntu.pastebin.com/abe3Ve65 | 19:09 |
| qwebirc23794 | Hardware should be "OK" as I had mythtv working on this box previously. | 19:09 |
| rhpot1991 | qwebirc23794: looks like you have it set to start on an invalid channel | 19:10 |
| rhpot1991 | check the channel for the input in mythtv-setup | 19:10 |
| qwebirc23794 | agree - but this is a satellite capture box. It should be using a script (/usr/local/bin/change_channel) to switch channels | 19:10 |
| qwebirc23794 | My PVR 150 capture card configured as IVTV MPEG | 19:11 |
| qwebirc23794 | and my listings source has channel 300 in it too | 19:11 |
| rhpot1991 | ivtv mpeg isn't right I don't think | 19:13 |
| gregL | qwebirc23794, What input are you using? | 19:13 |
| qwebirc23794 | ah - ok. PVR 150 is autodetected as an ivtv device. | 19:13 |
| rhpot1991 | I thought it specifically said something along the lines of pvr-xxx mpeg | 19:13 |
| qwebirc23794 | using Svideo 1 as input | 19:13 |
| rhpot1991 | I may be wrong, been a while since I set one of them up | 19:13 |
| rhpot1991 | may be an issue with your channel changer then | 19:14 |
| qwebirc23794 | does someone have an example script for change channel? | 19:14 |
| rhpot1991 | I've only ever done it over firewire sorry | 19:16 |
| tgm4883 | there is one on the mythtv wiki for ivtv i believe | 19:17 |
| qwebirc23794 | figured it out. Input Configuration had "preset tuner channel" set to a value. It should have been blank. | 19:36 |
| qwebirc23794 | thanks rhpot1991 and gregL for the help | 19:41 |
| nils- | hmm I think I have tricked the mythbuntu installer into installing onto an encrypted md raid device | 21:22 |
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!