[00:00] <Poyntz> kyubutsu: im kinda scared uninstalling then reinstalling will make the problem worse
[00:01] <kyubutsu> you have access to hardline?
[00:01] <Poyntz> if i install knetworkmanager will wired internet still work?
[00:01] <Poyntz> yaa.. but if i uninstall knetworkmanager will wired work?
[00:02] <kyubutsu> hook up to your hardline do an update/upgrade or what not, disconnect and try the wifi again
[00:03] <kyubutsu> in fact, disable wifi before doing that too
[00:05] <kyubutsu> all that is just to see if the network settings somewhat reset themselves ..
[00:05] <Poyntz> kyubutsu: only package that updated was plasma-netbook
[00:06] <kyubutsu> alright, try reconnect to wifi
[00:07] <sacton3> Can anyone give me a good reccomendation for a Desktop video capture program, I've tried recorditnow and it wont record at anything above like a 1fps framerate
[00:09] <gr8m8> sacton3: is your comp suficient to do that?
[00:09] <gr8m8> if so try ffmpeg
[00:10] <sacton3> yes it is, AMD64 2.4 ghz, 4 gb ram, Nvidia Geforce 8400+
[00:10] <sacton3> thanks gr8m8
[00:10] <Poyntz> kyubutsu: no luck
[00:10] <gr8m8> sacton3: it might be the vid card driver too - using the proprietry driver?
[00:11] <sacton3> yes, graphic card is set up with the reccomended driver
[00:11] <sacton3> everything else as far as video runs as smooth as silk
[00:11] <gr8m8> k
[00:11] <kyubutsu> !network | Poyntz
[00:11] <sacton3> I just cant seem to get a good frame rate when recording
[00:11] <kyubutsu> check that out and see if you can dig something..
[00:12] <Poyntz> kyubutsu: any kubuntu version?
[00:12] <kyubutsu> am afraid not
[00:13] <kyubutsu> but thats not a big deal really
[00:20] <Poyntz> kyubutsu: reinstalling fixed the problem. thanks for the help!
[00:21] <kyubutsu> nice!
[00:21] <kyubutsu> :D
[00:32] <progre55> hi guys. I've fresh-installed kubuntu 10.10, but the splash screen is crappy. it writes "kubuntu 10.10" on it with a blue background, and then prints the console messages, and really low graphics. any sugestions, please?
[00:33] <valorie> woah, that sounds wrong
[00:34] <valorie> did you do updates in the background as you were installing?
[00:34] <James147> progre55: are you using the nvida drivers?
[00:35] <valorie> I'm as happy as a clam at high tide with Kubuntu 10.10, but I have ATI
[00:35] <progre55> valorie: yeah, I had done some updates from a livecd
[00:35] <James147> progre55: try this: http://idyllictux.wordpress.com/2010/04/26/lucidubuntu-10-04-high-resolution-plymouth-virtual-terminal-for-atinvidia-cards-with-proprietaryrestricted-driver/
[00:35] <progre55> James147: ati, 5650
[00:36] <progre55> James147: thanks, let me have a look at it
[00:37] <kyubutsu> that usually happens after activating the proprietary drivers..
[00:38] <kyubutsu> >:(
[00:38] <kyubutsu> seen it on nvidia too
[00:40] <kyubutsu> its just cosmetic though.. no wonder it got low priority
[00:40] <kyubutsu> >:(
[00:41] <valorie> not sure it has low priority
[00:41] <valorie> cosmetic is important, too -- BUT, not all such problems are easily solved
[00:43] <progre55> well, let me try to reboot )
[00:43] <progre55> brb
[00:45] <progre55> swell, it got fixed)
[00:45] <progre55> actually, I had everything as was described in the fix, but I didnt have v86d installed =)
[00:48] <progre55> James147, valorie: thanks guys )
[01:57] <ilika> how do i install kubuntu from ubuntu and make it my def xwin
[02:02] <mkquist> http://www.psychocats.net/ubuntu/kde
[02:03] <aussa> how do I extract .tbz files? I tryed wit tar -xvjf and -xjf but that didn't work
[02:06] <dasKreech> ilika: Hello
[02:08] <dasKreech> aussa: try the command file on the file you are trying to open
[02:08] <dasKreech> !kde
[02:08] <dasKreech> ilika: ^^^
[02:13] <aussa> where can I get bunzip?
[02:19] <dasKreech> aussa: you can install libbunzip I think
[02:20] <aussa> can't find it :(
[02:20] <dasKreech> aussa: Bleah lib32bz2
[02:20] <dasKreech> -10
[02:20] <dasKreech> -1.0
[02:24] <dasKreech> aussa: Found it?
[02:26] <aussa> found bzip2, libzip1, I looked for bzip in Kpack, that is the best i got :S
[02:26] <aussa> bzip2 and libzip1 are already installed
[02:27] <aussa> dasKreech:
[02:27] <dasKreech> aussa: and you can't do a taz -xjf on the file?
[02:28] <aussa> dasKreech: tar you mean?
[02:28] <dasKreech> oh right sorry
[02:28] <dasKreech> 3/4 asleep
[02:28] <aussa> dasKreech: ~$ tar -xjf tao-current.tbz
[02:28] <aussa> bzip2: (stdin) is not a bzip2 file.
[02:28] <aussa> tar: Child returned status 2
[02:28] <aussa> tar: Error is not recoverable: exiting now
[02:28] <FloodBotK1> aussa: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[02:29] <dasKreech> aussa: file tao-current.tbz
[02:29] <aussa> ?
[02:30] <dasKreech> aussa: That's a command
[02:30] <dasKreech> see what that says
[02:31] <aussa> tao-current.tbz: HTML document text
[02:31] <dasKreech> aussa: There you go open it in a browser
[02:32] <aussa> ok, help me this please, look at this link: http://www.mono-project.com/GtkGlAreaSharp:Installation
[02:32] <aussa> look at the sixth step
[02:34] <dasKreech> seeing it
[02:34] <aussa> ok
[02:34] <dasKreech> where did you get the file from?
[02:35] <aussa> wget http://colliertech.com/downloads/tao/tao-current.tbz
[02:35] <dasKreech> aussa: what are you using to get on irc?
[02:36] <aussa> Quassel?
[02:36] <dasKreech> aussa: Ok click on the URL above then
[02:37] <dasKreech> aussa: that's what you downloaded
[02:39] <aussa> ok, so the file is corrupted? or damaged?
[02:40] <dasKreech> aussa: it no longer is on the server
[02:40] <aussa> mmm.... ok
[02:41] <dasKreech> second file is missing as well
[02:41] <aussa> yeah it is :S, ok then, thank you very much, i have to go now, good night :D
[02:42] <dasKreech> aussa: Night
[02:50] <onewayne> found auses for G4 mac 788mhz .put ubuntu 8.04 use for music ed and text works good ?
[02:52] <dasKreech> onewayne: Hmm?
[02:55] <onewayne> anyone using mac with ubuntu on it ,online now
[02:55] <Steve> I currently have Kubuntu installed and wanted to know if my computer can handle Windows 7.  Reqs are 1GHZ 32bit processor; 1gb ram; 16gb HDD; DirectX 9 graphics device with WDDM 1.0.  Is there any quick took/command to check all of this?
[02:56] <erich> How can I choose another IRC server?
[02:57] <onewayne> had 7 before it came out its not anything next linux
[02:58] <Steve> onewayne, i know it isnt, but want to double boot for some in my family, ill still stick to linux :-)
[03:03] <valorie> Steve: in Konversation, the command /sysinfo gives:
[03:03] <valorie> Sysinfo for 'valorie-HP-Pavilion-dv7-Notebook-PC': Linux 2.6.35-22-generic running KDE Development Platform 4.5.3 (KDE 4.5.3), CPU: AMDTurionX2Dual-CoreMobileRM-74 at 2200 MHz (4389 bogomips), HD: 84/363GB, RAM: 3599/3708MB, 191 proc's, 7.43h up
[03:03] <dasKreech> onewayne: You may need #ubuntu-ppc
[03:03] <valorie> don't know whether that works in other clients are not
[03:04] <valorie> erich, what client are you using?
[03:04] <dasKreech> Steve: lshw ?
[03:04] <onewayne> if you can  get a boot leg thats ok not pay $200 for it
[03:04] <dasKreech> erich: /server server.name.tld
[03:05] <dasKreech> onewayne: We don't support piracy here
[03:05] <erich> Thanks !!
[03:06] <onewayne> it is'not worth .50cents
[03:06] <dasKreech> doesn't make a difference
[03:07] <erich> server irc.virtualife.com.br
[03:08] <erich> Konversation 1.01 (KDE)
[03:08] <dasKreech> erich: press F2
[03:09] <onewayne> i use linux on all my computers it can do more than osx 10.8 or win 7
[03:10] <Steve> dasKreech, thanks, checking it now
[03:10] <valorie> erich, IRC commands are done with a slash as the first character on a line, so /server irc.virtualife.com.br on a line by itself
[03:11] <valorie> or F2 if you want to stay on this one, and set up a new one also
[03:34] <meoblast001> just a quick question
[03:35] <meoblast001> why does Kubuntu 10.10 take an hour looking for a network time server when it said at the beginning of installation that there was no network connection?
[03:36] <pibarnas> meoblast001: it's checking satellite conections... ;)
[03:43] <dasKreech> meoblast001: Ubiquity ?
[03:43] <meoblast001> idk.. the default installer for Kubuntu 10.10
[03:43] <meoblast001> system installer
[03:43] <dasKreech> right ubiquity
[03:43] <meoblast001> i know Ubuntu's is Ubiquity, but i'm not sure if Kubuntu's is
[03:43] <meoblast001> ah, o
[03:43] <meoblast001> k
[03:43] <dasKreech> it shouldn't if there is no network
[03:44] <meoblast001> well, it did
[03:47] <dasKreech> meoblast001: ok thanks
[04:16] <Sebasti> hi
[04:16] <Sebasti> anyone around running Kubuntu 9.10 (karmic) ?
[05:40] <andres_> español?
[05:43] <eagles0513875> !es | andres_
[05:44] <andres_> gracias por el comentario, ya esoty en ubuntu-es y ubuntu-server
[05:44] <andres_> solo que estoy pidiendo ayuda por estos tres canales
[06:03] <andres_> cant nobody help me whit ldap=
[06:11] <eagles0513875> !ldap | andres_
[06:11] <eagles0513875> andres_: ^ would that link help much
[06:11] <andres_> i am following this guide
[06:11] <andres_> https://help.ubuntu.com/10.04/serverguide/C/openldap-server.html
[06:17] <eagles0513875> andres_: im not much help as i havent setup openldap on my end :(
[06:17] <andres_> mmm
[06:17] <andres_> ok
[06:18] <jmichaelx> andres_: i have set up ldap, but i also just followed guides like those.... somehow i got it done that way
[06:18] <andres_> i will keep trying
[06:23] <pulaski> Hi, I run kubuntu 10.04, kde 4.5.1. I got a message when trying to move a file to trash that said, "Clean up trash manually." I opened trash by clicking on the trashcan plasma widget then I selected and deleted all the contents and tried to delete the file again but got the same message. How do I do "Clean up the trash manually"?
[06:27] <andres_> a question
[06:27] <andres_> i have to configure dns for ldap?
[06:37] <valorie> pulaski: in dolphin or other file manager
[06:38] <valorie> probably means you have some odd files in there that the Trashcan can't deal with automatically
[06:39] <pulaski> valorie: Thanks for responding. I'll try it.
[06:39] <valorie> good luck!
[06:39] <valorie> I've had to do that a couple of times through the years
[06:44] <pulaski> valorie: well, dolphin shows trash as empty but, oddly enough, when I use dolphin to try and move an old tar.gz archive to trash I get the message "The trash has reached its maximum size! Cleanup the trash manually."
[06:45] <pulaski> valorie: can I do this on the command line?
[06:46] <valorie> sure, if you have the path
[06:46] <valorie> and you might have to do it as sudo
[06:47] <valorie> sudo rm ~/PATH
[06:47] <valorie> do the same to the old tar file
[06:47] <valorie> rather than moving to trash
[06:48] <pulaski> valorie: that's the better suggestion, thanks.
[07:01] <eagles0513875> morning ikonia isolated the issue the issue is related to using a single 2tb hdd
[07:01] <eagles0513875> partition
[07:01] <eagles0513875> i used a 500gb lvm setup and it installed maverick just fine
[07:22] <pulaski> valorie: Thanks I was able to rm the unwanted archive, but after a test, dolphin still thinks trash is full when I try to use the right-click 'move to trash' option  even though it shows trash as empty.
[07:23] <valorie> very odd
[07:23] <valorie> I'm out of ideas
[07:23] <valorie> I suggest posting to the forum
[07:23] <valorie> where more eyes will see your plight
[07:24] <pulaski> valorie: Yes, I'm taking to much of your time. Your suggestion was helpful however so thanks alot. cya...
[07:24] <valorie> not at all
[07:24] <valorie> we're all here to help as we can
[07:27]  * eagles0513875 wonders why maverick hates my pc so
[07:27] <eagles0513875> jmichaelx: still crashing :(
[07:28] <jmichaelx> eagles0513875: ugh
[07:28] <jmichaelx> eagles0513875: ok, now that x exited for you... try nvidia x-config now
[07:28] <jmichaelx> then reboot, yet again
[07:28] <jmichaelx> oops
[07:28] <jmichaelx> nvidia-xconfig
[07:29] <jmichaelx> too late, and too much vodka
[07:30] <eagles0513875> trying again
[07:31] <eagles0513875> can anyone help me
[07:32] <eagles0513875> plasma workspace is constantly crashing on me after i login
[07:32] <eagles0513875> :(
[07:32] <eagles0513875> any ideas on how to fix it
[07:32] <jmichaelx> grrrr
[07:32] <jmichaelx> eagles0513875: i hate to ask this, but did you verify the md5sum on your install media?
[07:33] <eagles0513875> yep
[07:34] <jmichaelx> eagles0513875: damn, you should be very, veyr close
[07:34] <jmichaelx> eagles0513875: just for the anyhow of it, can you go ahead and just try running sudo apt-get install kubuntu-desktop
[07:35] <eagles0513875> thats installed
[07:36] <eagles0513875> jmichaelx: might have found the source of the problem
[07:36] <jmichaelx> does it just crash immediately?
[07:36] <eagles0513875> after i login
[07:36] <jmichaelx> ok, what do you think it might be?
[07:36] <eagles0513875> im triyng to start plasma-desktop from tty1
[07:37] <jmichaelx> well, default is tty7... but if you login via kdm, tty7 is where you should be
[07:37] <eagles0513875> when i do that it says plasma-desktop(1602): KUniqueApplication: cannot find the d-bus session server: "/bin/dbus-launch terminated abnormally with the following error: autolaunch error x 11 initialization failed
[07:37] <eagles0513875> and i am
[07:37] <eagles0513875> im at the login screen
[07:37] <eagles0513875> if i login and it crashes
[07:37] <FloodBotK1> eagles0513875: Please don't flood, use http://paste.ubuntu.com to paste, don't use Enter as punctuation.
[07:38] <eagles0513875> on tty7 i get a msg saying mountall: something about disconnecting from plymouth
[07:38] <jmichaelx> finally now the bot rebukes you instead of me!
[07:38] <jmichaelx> hmm, freaking plymouth
[07:38] <eagles0513875> gonna try reinstall kubuntu-desktop
[07:39] <eagles0513875> the error on tty7 is mountall: disconnected from plymouth
[07:39] <jmichaelx> eagles0513875: if you do not mind text scrolling by, you might consider ditching plymouth, too
[07:39] <eagles0513875> hey ikonia you have a moment to help me with an interesting issue
[07:40] <jmichaelx> ya, i must go to bed.... wish you good fortune on this, eagles0513875
[07:40] <eagles0513875> anyone else have any ideas or suggestions as to my plasma-workspace crashing
[07:41] <valorie> I feel his pain
[07:41] <valorie> my first install crashed and burned
[07:41] <valorie> reinstall is flawless so far
[07:41] <valorie> knock on wood
[07:42] <eagles0513875> valorie: it hasnt been for me
[07:42] <valorie> and it was plasma crash after plasma crash
[07:42] <eagles0513875> valorie: yep always after logging in
[07:42] <valorie> now, peace and quiet
[07:42] <eagles0513875> i have had other installation nightmares as well :(
[07:42] <eagles0513875> just crash reporting assistant on the screen nothing else
[07:43] <valorie> mine wasn't on logging it
[07:43] <eagles0513875> im tempted to see if i can get gnome installed
[07:43] <valorie> it seemed to be a glitchy weather applet
[07:43] <eagles0513875> well it was doing that as well to me
[07:44] <valorie> I tried gnome, but still can't bear it
[07:44] <valorie> would rather go to opensuse-kde or something
[07:44] <valorie> anything but gnome
[07:44] <eagles0513875> i updated and i installed the nvidia-current driver and it seems to have gotten me to be able to login before crashing
[07:44] <valorie> not that I have anything against anyone else using it
[07:44] <valorie> just not my taste At All
[07:46] <eagles0513875> ya not mine either but its growing on me slowly
[07:46] <eagles0513875> oh this is interesting
[07:46] <eagles0513875> i can still open apps somehow
[07:48] <valorie> apps usually aren't using plasma
[07:52] <eagles0513875> ya i know but i submitted a bug using dr konqi
[07:52] <eagles0513875> and after it allowed me to open up rekonq i think it was not sure
[07:52] <eagles0513875> what im not understanding is why i have no desktop
[08:00] <eagles0513875> valorie: giving gnome a whirl see if i have any issues
[08:00] <valorie> I hope you like it more than I did
[08:00] <valorie> lol
[08:00] <eagles0513875> i dont mind it but its something to work with till they fix kde
[08:06] <eagles0513875> gnomes workign kde is not lol
[08:06] <valorie> on the upside, you know that your *buntu base is a-ok
[08:07] <valorie> it's only the desktop you are having difficulty with
[08:07] <eagles0513875> kde is borked
[08:07] <eagles0513875> gnome is fine
[08:07] <valorie> well, for you
[08:07] <eagles0513875> fornow
[08:07] <valorie> kde shines for me
[08:07] <eagles0513875> for now
[08:08] <valorie> my son is running gnome right now also
[08:08] <valorie> and my husband is happy with windows
[08:08] <eagles0513875> interesting
[08:08] <eagles0513875> just did a reinstall of plasma desktop
[08:08] <valorie> it isn't a religion
[08:08] <eagles0513875> let me try kde again
[08:09] <eagles0513875> nm that didnt do it
[08:09] <valorie> wait a week or two
[08:10] <valorie> perhaps there are some updates to drivers and such you need
[08:10] <valorie> what KDE version do you have?
[08:10] <eagles0513875> what ever is with maverick
[08:10] <eagles0513875> this is a clean install
[08:10]  * valorie has 4.5.3
[08:10] <valorie> very stable
[08:10] <eagles0513875> i filed a bug on kde bug tracker with dr konqi
[08:10] <eagles0513875> what comes with maverick anyway
[08:11] <valorie> good
[08:11] <valorie> 4.5.1 is standard on Mav
[08:11] <eagles0513875> bah
[08:11] <valorie> I just upgraded a few days ago
[08:11] <valorie> was too busy at UDS before
[08:11] <rick__> Hey so which is the easiest to use IRC client on Kubuntu?
[08:11] <eagles0513875> valorie: are you a dev
[08:11] <eagles0513875> rick__: konversation i like
[08:11] <valorie> i'm a writer
[08:12] <eagles0513875> a journalist?
[08:12] <valorie> konvi and quassel are the two big GUI clients
[08:12] <valorie> no, tech writer
[08:12] <rick__> I'm on Konversation, cool just wanted to see what was best.
[08:12] <valorie> writing for Amarok and Kubuntu
[08:12] <eagles0513875> nice nice
[08:12] <valorie> I love Konvi
[08:12] <eagles0513875> im thinking i might end up putting together a subdomain of my business site with how to
[08:12] <eagles0513875> how to's etc
[08:13] <eagles0513875> why the hell does crappy quassel have to come with kde these days
[08:15] <sophie_> hello
[08:15] <eagles0513875> !hi | sophie_
[08:16] <valorie> lots of people love it
[08:16] <valorie> especially with a core
[08:16] <eagles0513875> i hate it tbh
[08:16] <eagles0513875> ya
[08:16] <valorie> it was OK on my netbook
[08:16] <eagles0513875> is somethign in the works for konvi of that sort
[08:17] <valorie> a core?
[08:17] <sophie_> I can not restart my Kubuntu this morning, I have made a df -h and I have 15Go free on my home and /
[08:17] <valorie> there are bouncers such as BNC
[08:17] <valorie> that's what i use
[08:17] <sophie_> I have a message : xhost : unable to open display ""
[08:18] <sophie_> when I try a recovery mode and log in
[08:18] <valorie> eagles0513875: you might try #konversation and ask the developer
[08:18] <valorie> Sho_ is a good guy
[08:18] <eagles0513875> will ahve to when im not in a rush
[08:18] <valorie> sure
[08:24] <sophie_> someone, please?
[08:25] <valorie> wish I could help, sophie_
[08:25] <eagles0513875> wowie
[08:25] <eagles0513875> getting some super nice fps
[08:25] <eagles0513875> almost 9000 fps
[08:27] <eagles0513875> hey valorie do you know if the enterprise cloud computing features that come with server can be installed on kubuntu?
[08:27] <sophie_> valorie: yes, please
[08:27] <valorie> sorry, I don't know the answer to either of your questions
[08:27] <valorie> :(
[08:31] <eagles0513875> valorie: was a pleasure meeting you
[08:31] <eagles0513875> :)
[08:31] <eagles0513875> question what is bluedevil
[08:31] <eagles0513875> !info bludevil | eagles0513875
[08:31] <valorie> the new bluetooth app
[08:31] <eagles0513875> kool
[08:32] <valorie> but it is bluedevil
[08:32] <eagles0513875> ya
[08:32] <eagles0513875> hehe
[08:37] <bigbrovar>  !info bluedevil | eagles0513875
[08:37] <eagles0513875> bigbrovar: thanks
[08:52] <cato37> i am having a time finding a command reference for apt-get that specifically lets me download all the recommended files of a package in plain(er) english. can anyone help?
[08:59] <cato37> nvrmnd... i found what i was looking for staring me in the face in the man file. :/
[09:00] <sresu> How to setup webcam? I connected it via USB, there was no detection. There is a CD with it for installation in Windows system. How can I install iball C12.0 webcam in K/Ubuntu?
[09:05] <sresu> !webcam
[09:08] <valorie> cato37: are you saying you want to download only, and not install?
[09:09] <valorie> oh, now I see your reply to yourself
[09:09] <valorie> sorry for the noise
[09:09] <cato37> i want to download and then install the dependencies one at a time from konsole, as i read what they are.
[09:10] <cato37> valorie: at least i wanted to, but i found another way to do it.
[09:11] <valorie> that would be dangerous in my hands
[09:11] <cato37> valorie: the command --install-recommends doesnt work. i still have to dl one recommended package at a time, and i just type it into knotes and look it up.
[09:15] <valorie> for general purposes, I just use kpackagekit now
[09:15] <valorie> it's finally stable and reliable
[09:15] <valorie> I used to use Synaptic, but for the first time ever, I didn't install it
[09:16] <valorie> often use apt-get, of course
[09:16] <valorie> if I know exactly what I want
[09:16] <Tm_T> !info wajig
[09:18] <cato37> valorie: somethings like gimp i want all the extras that come with it, but most of the programs it isnt important. it is just a pain to not be able to simply dl everything including the recommended packages. unless i am using the "--install-recommends" switch wrongly.
[09:20] <valorie> that's fine for people with an intimate knowledge of the packages, and how to get out of trouble
[09:20] <valorie> dependency hell isn't somewhere I like visiting
[09:23] <cato37> valorie: hopefully, just once or twice, like with gimp and blender won't be too painful. )
[09:27] <valorie> background: I ran gentoo for awhile
[09:31] <cato37> keen. gentoo is beyond my current scope. i am very happy with kubuntu after having vista crashing continually like clockwork.
[09:31] <eagles0513875> hey guys how did you all manage to get kde working on maverick
[09:31] <eagles0513875> im having plasma crashes left right and center with kde
[09:32] <eagles0513875> the plasma workspace is crashing like no other on me
[09:38] <cato37> i havent had any crashes with plasma at all.
[09:56] <sresu> I need help with webcam/ The screen is displayin green screen for the picture.. How to fix it?
[09:56] <sresu> I need help with webcam/ The screen is displayin green screen for the picture.. How to fix it?
[09:57] <sresu> Sorry
[10:38] <crissi_> hello
[10:38] <crissi_> i need some help with kubuntu 10.10
[10:38] <crissi_> i have the problem that the xserver aften needs a lot of cpu
[10:38] <crissi_> i disabled all desktop effects
[10:39] <crissi_> graphics card is a nvidia geforce 6200
[10:39] <eagles0513875> crissi_: i have been having issues with plasma it could be whats eating up ur cpu
[10:39] <crissi_> driver is nvidia latest (260.19.12)
[10:40] <eagles0513875> humm
[10:40] <eagles0513875> not sure
[10:41] <crissi_> htop shows X as process with high cpu
[10:41] <eagles0513875> odd
[10:41] <crissi_> i also have delays with some programs
[10:42] <crissi_> for example if i pres f12 for show yakuake console it need 1-3 seconds before it comes down
[10:43] <crissi_> machine has AMD Athlon(tm) 64 Processor 3200+ (2,2ghz), 2gb ram
[10:43] <crissi_> should be gooed enough for kde4
[10:44] <eagles0513875> crissi_: ya it is
[11:31] <crissi_> now i have another problem... my ssh connections often freeze and i got 'broken pipe'.. i got this since update to 10.10.. is there something which has changed and can cause this?
[12:00] <SC-M> is ubuntu must be format of Ext4? or just FAT32/NTFS? (swap is required)
[12:30] <eagles0513875> hey guys
[12:45] <Peace-> eagles0513875: heya man
[12:45] <eagles0513875> heya Peace-
[12:45] <eagles0513875> kde hates me on maverick
[12:45] <Peace-> oh yea?
[12:45] <eagles0513875> plasma workspace crashes constantly on me after login
[12:45] <Peace-> why man
[12:46] <eagles0513875> plasma workspace crashes constantly on me after login
[12:46] <Peace-> eagles0513875: have you renamed $HOME/.kde
[12:46] <eagles0513875> Peace-: to what
[12:46] <eagles0513875> gnome is fine kde isnt
[12:46] <eagles0513875> i moved .kde to .kde-old
[12:46] <Peace-> eagles0513875: :) rename that
[12:46] <eagles0513875> ill try it again
[12:46] <Peace-> ok
[12:46] <Peace-> it's the same rename or move
[12:46] <Peace-> it's the same
[12:47] <eagles0513875> let me try again
[12:48] <Nakkel> How do I find out which packages are blocking my upgrade to 4.5.3? Now it tries to uninstall some packages that I presume are somewhat essential, like plasma-desktop and kdebase-workspace.
[12:50] <eagles0513875> Peace-: no worky same issue
[12:50] <Peace-> eagles0513875: ok wait a second
[12:50] <Peace-> eagles0513875: you get a kubuntu fresh installation ?
[12:50] <Peace-> or
[12:51] <eagles0513875> fresh install
[12:51] <eagles0513875> ended up installing gnome cuz i had no desktop
[12:51] <Peace-> i mean with the cd
[12:51] <Peace-> mm
[12:51] <Peace-> ok
[12:51] <Peace-> lets try to reinstall kde
[12:51] <eagles0513875> alternate cd cuz i was having big time issues installing
[12:52] <eagles0513875> Peace-: should i purge kubuntu-desktop and reinstall
[12:53] <eagles0513875> Peace-: im gonna go have lunch then ill be back
[12:53] <Peace-> eagles0513875: wait a second and you will get the code
[12:53] <eagles0513875> ok sry
[12:53] <eagles0513875> !flash
[12:54] <Peace-> eagles0513875: http://nowardev.wordpress.com/2010/11/08/reinstall-kde/
[12:55] <Peace-> eagles0513875: pick the 10.10
[12:55] <Peace-> version
[12:56] <eagles0513875> interesting its like kde never got installed O_o
[12:59] <ghostcube> hmm, i got this problem after updating to 10.10: intel onboard sound ich10 asusu p5q-pro mobo, kmix doesnt recognize any channel like line in or something. 2 nd after using jackd in combination with pulseaudio i cant get flash to play sound
[13:00] <ghostcube> .asoundrc is existing
[13:01] <bigbrovar> anyone else experience this issue where strigi seem to just stop indexing when u resume from suspense.
[13:01] <Peace-> ghostcube: try to install this
[13:01] <bigbrovar> it kinda just loses all indexed file and would start all over from stratch
[13:03] <ghostcube> libsdl1.2debian-pulseaudio is installed and pulseaudio-module-jack is installed
[13:03] <ghostcube> pulseaudio works through jackd wit module-jack-sink and source
[13:04] <ghostcube> only flash not
[13:04] <Peace-> ghostcube: a second i read again your problem
[13:05] <ghostcube> no prob :)
[13:05] <ghostcube> my kmix is only showing internal adapter no sngle channels
[13:05] <Peace-> ok so i guess my solutions could work for your
[13:05] <ghostcube> second prob flash doesnt like the throughout from pulse to jackd :
[13:06] <Peace-> sudo apt-get install pavucontrol
[13:06] <Peace-> goo_:
[13:06] <Peace-> ghostcube:  sudo apt-get install pavucontrol
[13:06] <ghostcube> will take this down not at my linux box right now, iam at work but nice anyone has an idea
[13:06] <ghostcube> :)
[13:10] <Peace-> ghostcube: i have heard that pavucontrol is the problem
[13:10] <Peace-> ghostcube: is not installed by default so pulse doen't work welll with kmix
[13:10] <Peace-> ghostcube:  you could try this too http://nowardev.wordpress.com/2010/09/18/audio-problem-with-kubuntu-10-10/
[13:10] <Peace-> ghostcube: that is my blog
[13:10] <ghostcube> yeah i read about pavucontrol but i wasnt sure if to install
[13:11] <ghostcube> oh ok will have a look
[13:11] <Peace-> ghostcube: sorry fot some bad words but i am a wild man
[13:11] <Peace-> x
[13:11] <Peace-> xD
[13:11] <ghostcube> i build a script loading pactl load-module module-jack-sink and source to be loaded with qjackctl
[13:11] <ghostcube> so i can route all pa to jack
[13:12] <Peace-> ghostcube: have you posted on kde apps?
[13:12] <ghostcube> no
[13:12] <Peace-> nice idea if you do
[13:12] <ghostcube> hmm will check
[13:12] <ghostcube> need to find out why flash doesnt like it this way even i got an asoundrc
[13:12] <ghostcube> o.O
[13:29] <blaz387> hi all, does anyone know how to chang grub image on kubuntu 10.10 amd64..?
[13:30] <blaz387> sorry, to change grub splash image, i mean..
[13:42] <Space_Man> blaz387: Google will have the answer :)
[13:43] <Space_Man> timing
[13:51] <Hazamonzo> hmm,  i have the CPU widget and its telling me that all four cores of my COU are working hard. But looking at the system activity i cannot match what process is doing all this work. http://imagebin.ca/view/9AMtbls4.html  Am i missing something here?
[13:53] <Hazamonzo> hmm, *CPU
[13:54] <Hazamonzo> Look at that. There is a little pulldown that filters processes
[13:59] <EvilRoey> hey all
[13:59] <EvilRoey> is kwin known to be buggy?
[13:59] <EvilRoey> the thing crashes on me frequently
[13:59] <EvilRoey> or that it will lock up for a few seconds (everything sans mouse)
[14:09] <crissi_> where i can find kernel 2.6.36 for maverick?
[14:12] <Peace-> crissi_: ppa kernel ubuntu : search google
[14:12] <Peace-> crissi_: that is not reccomennded anyway
[14:12] <crissi_> why?
[14:12] <Peace-> you could get crash bad speed
[14:12] <crissi_> 2.35 has problems
[14:12] <Peace-> and stuff like that
[14:12] <crissi_> 2.6.35
[14:12] <Peace-> crissi_: ok if you know how to change kernel on the boot you can handle the story
[14:12] <crissi_> i can :)
[14:13] <Peace-> crissi_: it's a normal warming for noob if you are not you can :)
[14:15] <crissi_> hm.. strange
[14:15] <crissi_> on lucid i get 2.6.36 via kernel-ppa
[14:15] <crissi_> on maverick not
[14:20] <Peace-> crissi_: have you refreshed?
[14:20] <Peace-> sudo apt-get update
[14:20] <crissi_> yes
[14:20] <Peace-> after adding ppa kernel ?
[14:20] <Peace-> ok so i guess they have not packaged yet
[14:20] <Peace-> for maverick
[14:21] <crissi_> i did  apt-add-repository ppa:kernel-ppa/ppa
[14:21] <Peace-> but let's checking
[14:21] <crissi_> then apt-get update
[14:21] <crissi_> apt-cache search doesnt find anything regarding 2.6.36
[14:22] <BluesKaj> Howdy
[14:22] <Peace-> crissi_: mm it seems doesn't exist for maverick
[14:22] <Peace-> crissi_: mm strnage
[14:23] <crissi_> how bad
[14:23] <crissi_> but it should be=
[14:23] <crissi_> ?
[14:23] <Peace-> crissi_: mmm try to add this but only add and then sudo apt-get update , check if exist ,,,,,, deb http://ppa.launchpad.net/kernel-ppa/ppa/ubuntu maverick main
[14:23] <Peace-> crissi_: don't install
[14:23] <Peace-> because i guess there not the gpg key
[14:23] <Peace-> so it's not safe if you install
[14:23] <Peace-> anyway
[14:24] <tsimpson> it's not in that ppa: https://edge.launchpad.net/~kernel-ppa/+archive/ppa/+packages?field.name_filter=&field.status_filter=&field.series_filter=
[14:25] <Peace-> tsimpson: mm so where ?
[14:25] <Peace-> i dunno then
[14:25] <tsimpson> doesn't look like they build anything recent for maverick
[14:26] <Peace-> too bad
[15:32] <Kara-No> I've just come back to linux after a couple years, installed Kubuntu 10.10 last night, and I'm having trouble watching DVDs.  Can anyone help?
[15:33] <ghostcube> maybe you can describe he problem a bit better?
[15:35] <Kara-No> Dragonplayer does nothing, Kaffeine says 'Error reading NAV packet', and VLC starts the DVD, but stops playing when I click on anything.
[15:37] <rork> !medibuntu | Kara-No
[15:37] <rork> Kara-No: you'll have to install libdvdcss2
[15:40] <Kara-No> Hooray!  Thanks
[15:42] <rork> you're welcome
[15:44] <friese> hi
[15:46] <rork> hi
[16:18] <sunny_slls> hello everybody
[16:18] <sunny_slls> hey i am trying to compile qt
[16:18] <sunny_slls> but its taking too much of cpu usage and my lappy gets turned off
[16:19] <sunny_slls> so can anyone tell me how can i use the distro qt
[16:19] <sunny_slls> i mean kubuntu-qt
[16:19] <sunny_slls> ?
[16:20] <tsimpson> sunny_slls: it's already installed
[16:21] <sunny_slls> tsimpson, actually i wanted to set my kde environment
[16:21] <sunny_slls> for plasma programming
[16:21] <DarthFrog> sunny_slls: dpkg --list | grep qt
[16:23] <tsimpson> sunny_slls: install libqt4-dev, qt4-dev-tools and kdebase-workspace-dev
[16:23] <sunny_slls> ok
[16:24] <DarthFrog> And you might also want qt4-qtconfig.
[16:24] <sunny_slls> i am using 10.04 LTS
[16:24] <sunny_slls> so it contains qt4.6
[16:25] <sunny_slls> i believe
[16:25] <tsimpson> 4.6.2, yes
[16:25] <sunny_slls> 10.10 has qt 4.7
[16:25] <DarthFrog> sunny_slls: If you want to do plasma programming, why wouldn't you want to be running the latest & greatest KDE?
[16:25] <cuznt> try as i might, i have three pc's running kubutu and i can not share each others files
[16:26] <sunny_slls> DarthFrog, i didnt' get you
[16:26] <DarthFrog> sunny_slls: 4.5.3 is the current version of KDE.  I believe Lucid has 4.4, doesn't it?
[16:26] <sunny_slls> DarthFrog, yes right
[16:27] <DarthFrog> You'd be developing for an obsolete version of KDE.
[16:27] <sunny_slls> DarthFrog, actually i am using 10.04 because it is stable
[16:27] <sunny_slls> LTS
[16:27] <sunny_slls> i mean
[16:27] <DarthFrog> Which is an excellent reason for staying with Lucid, except for what you want to do. :-
[16:27] <DarthFrog> :-)
[16:28] <DarthFrog> Besides 10.10 seems rock solid to me.
[16:29] <sunny_slls> i wan't to install qt4.7 in my lucid
[16:30] <tsimpson> I think it's available in the kubuntu-ppa/backports repository
[16:30] <sunny_slls> DarthFrog, that is why i was trying to compile qt-git
[16:30] <sunny_slls> but while compilation it takes too much resources
[16:30] <sunny_slls> and my lappy gets switched off
[16:31] <sunny_slls> DarthFrog, should i switch on to kubuntu10.10?
[16:31] <sunny_slls> ok
[16:32] <tsimpson> sunny_slls: yep, Qt 4.7 and KDE SC 4.5.1 are available for lucid: http://www.kubuntu.org/news/packages-available-kde-platform-plasma-and-applications-451
[16:33] <Peace-> tsimpson: but kde 4.5.x will not upgrade on 10.04?
[16:33] <Peace-> i mean >4.5.1
[16:33] <tsimpson> in the PPA it likely will
[16:34] <tsimpson> not in the "official" repositories though, yes
[16:34] <Peace-> i would like upgrade kde but from 4.4.2 that i have to 4..5.3
[16:34] <tsimpson> stable releases don't get upgrades like that, only bug/security fixes
[16:35] <Peace-> have you the repository for lucid?
[16:35] <Peace-> tsimpson: yea but i would 4.5.3 i guess it's pretty stable
[16:36] <DarthFrog> Peace-: sudo apt-add-repository ppa:kubuntu-ppa/backports && sudo apt-get update && sudo apt-get dist-upgrade.
[16:36] <DarthFrog> Peace-: all on one line.
[16:36] <tsimpson> if you want to help with packages I'm sure that would be appreciated :)
[16:36] <Peace-> DarthFrog: yea but kde 4.5.3 ?
[16:36] <DarthFrog> Peace-: The Kubuntu page says only 4.5.1
[16:36] <Peace-> DarthFrog: because if it's kde 4.5.1 i don't want
[16:36] <DarthFrog> Peace-: As of Sept.3.
[16:36] <sunny_slls> tsimpson, how can i implement kde 4.5.1 or above in lucid?
[16:37] <Peace-> DarthFrog: mm?
[16:37] <tsimpson> sunny_slls: for 4.5.1, add the PPA and update your packages
[16:37] <tsimpson> !info kdelibs5 kubuntu-backports
[16:37] <DarthFrog> Peace-: That's the date on the Kubuntu web page.
[16:37] <tsimpson> bot's out-of-date
[16:37] <Peace-> DarthFrog: so i guess it's kde 4.5.1
[16:38] <Peace-> DarthFrog: i prefer kde 4.4.2 to kde 4.5.1
[16:38] <Peace-> i would like get 4.5.3
[16:38] <Peace-> xD
[16:38] <Peace-> or i keep 4..4.2
[16:39] <DarthFrog> Peace-: In the Kubuntu announcement for KDE SC 4.5.2, they say there are no plans for packages for 10.04 LTS and that 10.10 is the way to go for newer KDEs.
[16:39] <Peace-> well we are at kde 4.5.3
[16:40] <Peace-> i thought kde 4.5.2 was not packaged
[16:40] <Peace-> but maybe kde 4.5.3
[16:40] <Peace-> xD
[16:40] <DarthFrog> http://www.kubuntu.org/news/kde-sc-4.5.2
[16:40] <Peace-> i knew about kde 4.5.2
[16:40] <Peace-> it's the same for kde 4,.5.3?
[16:41] <Peace-> i mean why is there kde 4.5.1 for lucid
[16:41] <DarthFrog> http://www.kubuntu.org/news/kde-sc-4.5.2http://www.kubuntu.org/news/kde-sc-4.5.3
[16:41] <DarthFrog> Oops. :-(
[16:41] <TomaszC> Hi! How to check if ceratin private key correspond to public key ?
[16:41] <Peace-> DarthFrog: no problem i am an older user of kubuntu
[16:41] <KukuNut> DarthFrog: so they are saying 10.04 is NOT LTS anymore?
[16:41] <Peace-> DarthFrog: i know very well the news
[16:42] <DarthFrog> KukuNut: No, not at all.   That's not what LTS means.
[16:42] <DarthFrog> KukuNut: LTS means support for the original software only.
[16:43] <tsimpson> LTS is bug and security updates, not new features
[16:43] <DarthFrog> KukuNut: Thus 10.04 has LTS for KDE SC 4.4 only.
[16:44] <DarthFrog> I don't know if there is LTS for PPA backports, either, in 10.04.
[16:44] <nicola> list
[16:44] <tsimpson> PPAs are explicitly not LTS
[16:45] <DarthFrog> There you go.  If you want LTS, stay with KDE SC 4.4.  Until the next LTS release.
[16:45] <nicola> ce qualche italiano?
[16:45] <Pici> !it | nicola
[16:45] <sunny_slls> tsimpson, hey i added the ppa in the software sources and updated but its not updating
[16:45] <sunny_slls> still it is qt 4.6
[16:45] <Peace-> nicola: i am italina please join #ubuntu-it
[16:46] <sunny_slls> tsimpson, ve packages in some PPA
[16:46] <DarthFrog> sunny_slls: Did you do a dist-upgrade?
 shadeslayer: ^
[16:46] <eagles0513875> Peace-: tryiing to see if yoru fix works
[16:46] <sunny_slls> DarthFrog, yes i did sudo apt-get update
[16:47] <sunny_slls> also i reloaded from the ui software sources
[16:47] <tsimpson> sunny_slls: you need to do "sudo apt-get dist-upgrade" after "update"
[16:47] <DarthFrog> sunny_slls: Not enough.  You have to also do "sudo apt-get dist-upgrade".
[16:47] <tsimpson> or use the package manage to update the packages
[16:47] <sunny_slls> ok
[16:47] <DarthFrog> sunny_slls: apt-get update only updates your cache of the repositories listings.
[16:48] <sunny_slls> tsimpson, in package manager there is an option in updates "unsupported updates (lucid backports)" do i need to enable that too
[16:49] <sunny_slls> ??
[16:49] <cuznt> !sharin
[16:49] <tsimpson> no
[16:49] <sunny_slls> ok just add ppa:kubuntu-ppa/backports and reload
[16:50] <cuznt> i have three kde pc's that i wish to be able to file share in a work group but am unable to do so. we are all connected by a simple switch
[16:51] <sunny_slls> tsimpson, still it shows the same thing while i see the list http://pastebin.com/H7A2jXSh
[16:51] <sunny_slls> tsimpson, do i need to reboot ?
[16:52] <tsimpson> sunny_slls: what does "apt-cache policy kdelibs5" show?
[16:53] <sunny_slls> tsimpson, http://pastebin.com/AVddEE84
[16:53] <tsimpson> sunny_slls: you haven't updated your packages yet
[16:54] <tsimpson> either run "sudo apt-get dist-upgrade" or use the package manage to upgrade
[16:55] <sunny_slls> ok let me do it once again
[16:55] <sunny_slls> tsimpson, "ppa:kubuntu-ppa/backports" this is to be added in the software sources right ?
[16:56] <DarthFrog> sunny_slls: You onlyneed to do that once.
[16:56] <tsimpson> sunny_slls: you've already added it, no need to do so again
[16:56] <DarthFrog> sunny_slls: All you need to do now is the dist-upgrade.  Just do it.
[16:56] <sunny_slls> ok
[16:57] <sunny_slls> tsimpson, and after it is done i need to install qt4-dev, qt4-dev-tools etc .. since it will install qt4.7 right
[16:58] <tsimpson> you'll already have Qt 4.7, but you need those packages to compile applications with Qt
[16:58] <tsimpson> and KDE
[16:58] <sunny_slls> ok
[16:58] <sunny_slls> got it
[16:58] <sunny_slls> thanks tsimpson
[16:58] <sunny_slls> thanks to you too DarthFrog
[16:59] <sunny_slls> will tell you when done
[17:00] <eagles0513875> wtf how can i get konversation to auto identify
[17:00] <eagles0513875> and Peace-
[17:00] <eagles0513875> your fix worked m8 :)
[17:00] <Peace-> eagles0513875: hehehe
[17:00] <eagles0513875> so did that mean that kubuntu-desktop was fully installed?
[17:00] <Peace-> eagles0513875:  you have to set
[17:00] <Peace-> eagles0513875: konvesation i will show now
[17:00] <Peace-> how
[17:00] <eagles0513875> i am but whats the syntax
[17:00] <eagles0513875> ty
[17:00] <Peace-> nickserv
[17:01] <eagles0513875> i normally use kvirc but i decided to come back to konversation
[17:01] <tsimpson> under "General" in your identity settings
[17:01] <DarthFrog> kvirc.  Now there's a blast from the past. :-)
[17:01] <eagles0513875> i know where it is tsimpson just the syntax is screwey
[17:01] <Peace-> eagles0513875: http://simplest-image-hosting.net/jpeg-0-videopreviw1
[17:01] <eagles0513875> DarthFrog: lol
[17:01] <eagles0513875> brb
[17:02] <tsimpson> eagles0513875: there are 2 boxes at the bottom, Service and Password
[17:02] <tsimpson> Service is "NickServ", Password is your password
[17:02] <eagles0513875> thanks that worked
[17:02] <eagles0513875> DarthFrog: i use the svn version
[17:02] <eagles0513875> usually
[17:03] <Peace-> tsimpson: mm i used this http://simplest-image-hosting.net/jpeg-0-videopreviw1
[17:03] <nicola__> ubuntu-it
[17:03] <Peace-> tsimpson: doesn't need of N and S
[17:03] <Peace->  i guess
[17:03] <DarthFrog> eagles0513875: It's been years since I used kvirc. :-)  I'd forgotten all about it until you mentioned it a minute ago.
[17:03] <tsimpson> Peace-: IRC is case-insensitive
[17:04] <eagles0513875> DarthFrog: give it a whirl hehe konversation was the first one i use then it was dropped for a while so it would be ported to kde4 and now its back
[17:04] <Peace-> nicola__: you are not on the italian channel /join #ubuntu-it
[17:04] <Peace-> nicola__: /join #ubuntu-it without space
[17:05] <Peace-> nicola__: before /
[17:09] <BajK> any ideas or tutorials for testing KDE 4.6 trunk (or svn) on kubuntu? I am too stupid for that -.-
[17:10] <tsimpson> BajK: http://techbase.kde.org/Getting_Started has lots of info
[17:11] <BajK> tsimpson: well I got stuck at the point "getting source code" and then "daily snapshots"
[17:12] <BajK> it said svn revert -R # this step restores missing files ( i downloaded kdebase) but it just downloaded a few files to kdebase
[17:12] <BajK> not other things like plasma andsuch
[17:13] <tsimpson> BajK: plasma is in kdebase-workspace
[17:15] <phoenix_firebrd> !offtopic
[17:16] <phoenix_firebrd> is there a kde app to play mp3 files that uses winamps modern skins
[17:16] <tsimpson> BajK: did you run "svn up" after?
[17:16] <BajK> tsimpson: but the tutorial said just download a file of the scheme kdemodule-svn and i downloaded kdebase (which sounded logical to me) but then it did NOT!!! download the neccessary rest
[17:16] <BajK> yes
[17:18] <tsimpson> BajK: I think #kde-devel would know more than me here, I've never used a snapshot
[17:18] <BajK> okay thx
[17:36] <esther_> Hello. I was wondering if someone could tell me if it is possible to use private status.net feeds in the microblogging widget?
[18:16] <phoenix_firebrd> where can i download the winamp presets for qmmp
[18:17] <phoenix_firebrd> i mean the equalizer presets
[18:17] <sunny_slls> tsimpson, its done :)
[18:18] <sunny_slls> tsimpson, time to install qt4.7-dev
[18:39] <rork> phoenix_firebrd: http://qt-apps.org/content/show.php?content=59218&forumpage=2 search for winamp on the page, second hit
[18:40] <phoenix_firebrd> rork: i tried that i didnt work
[18:40] <phoenix_firebrd> rork: the link specified in that is dead
[18:43] <rork> phoenix_firebrd: http://taltan2.free.fr/dl/ubuntu/xmms-winamp_presets.gz checked and works :)
[18:46] <phoenix_firebrd> rork: that worked, thank you :)
[18:47] <rork> nice :)
[19:02] <tzanger> good afternoon everyone. I'm running 10.10 and trying to use an a2dp headset
[19:02] <esther> Okay Easier question: :) How do I get my partions for like windows to appear?
[19:02] <tzanger> the audio is coming across fine, but it's definitely not a2dp, it's using the sco (hsp?) connection that the headphones also support
[19:02] <tzanger> is there any way to tell it not to use that?
[19:05] <tzanger> nevermind, pactl did it
[19:21] <steven> hi all, i cant get my head phones to work on lucid lts, on intel hda snd cards ... any ideas as to why
[19:30] <ivano> buonasera a tutti
[19:30] <ivano> ho scaricato amsn ma non riesco a trovarlo ,,, dove lo ha scaricato????
[19:30] <ivano> chi mi aiuta
[19:30] <Pici> !it | ivano
[19:31] <ivano> #ubuntu.it
[19:41] <phoenix_firebrd> i hear some crackling noise when i increase or decrease volume, i am using kubuntu 10.10
[19:49] <DarthFrog> phoenix_firebrd: You have atmospheric corrosion built-up on your volume potentiometer.  Rotate it back and forth a few times to wear it off.
[19:50] <phoenix_firebrd> DarthFrog:  ha ha ha
[19:50] <phoenix_firebrd> DarthFrog: i think i have corrosion in pulse volume control
[19:52] <kyubutsu> have you updated yet.. there were a bunch of updates in the last two days
[19:52]  * crack05 is away (Gone)
[19:52] <roentgen_> phoenix_firebrd: I'd purge pulse
[19:53] <roentgen_> It works just fine without it here
[19:53] <phoenix_firebrd> roentgen_: i like to , but i am afraid that i might mess up with the os
[19:54] <roentgen_> I'm rather sure it won't but it's your system after all and think twice
[19:54] <progre55> hi guys. want to activate a screen edge action on the upper-left side of the screen, but "present windows" actions are disabled. any suggestions, please?
[20:09] <progre55> so, anybody knows why the screen edge action "present windows" might be disabled?
[20:25] <marseillai> hello.
[20:25] <marseillai> I've make .sh script and I don't know how to change the icon of this script
[20:26] <marseillai> i can change icon of every .sh files, i can create a .desktop shortcut then affect an icon but not change the icon for this specific file
[20:26] <marseillai> is there a way to do this ?
[20:38] <noobuntu> where can i find the software sources in kubuntu ?
[20:39] <roentgen_> noobuntu: kpackagekit
[20:40] <noobuntu> thank you
[21:09] <noobuntu> do i have to install samba to have a network with a windows pc ?
[21:12] <James147> noobuntu: "sudo apt-get install samba"  then you need to configure it :)
[21:12] <noobuntu> ok i ll use webmin for that :p
[21:13] <noobuntu> and i suppose its the same proccess as in ubuntu if i want to mount localy a network location to fstab ?
[21:13] <James147> noobuntu: yup.. might want to install smbfs as well if your doing taht
[21:13] <noobuntu> will do thank you very much xD
[21:27] <Tomasso> i cant install kdevlop on ubuntu, i enabled updates from the repositories list but it still doesnt find kdevelop
[21:28] <James147> Tomasso: try this: http://www.kubuntu.org/news/kdevelop-41-packaged
[21:28] <Tomasso> let me check
[21:34] <noobuntu> i wanna create a hotkey for konsole what is the command to use ?
[21:34] <Tomasso> mmm even adding ppa:kubuntu-ppa/backports to software sourcess
[21:45] <James147> noobuntu: you can add a shotcut key to launch any program from kmenuedit
[21:46] <James147> Tomasso: did you update the software lists? "sudo apt-get update"
[21:47] <Tomasso> James147, yesss it worked now, installing, thank you :D
[21:51] <surunveri> HI
[21:51] <surunveri> I accidentally removed plasmaworkspace panel when iwas trying to remove another panel
[21:52] <surunveri> so how can i get it back? :D
[21:53] <surunveri> :D
[21:53] <surunveri> darn i've no idea :D
[21:57] <surunveri> anyone? =/
[22:03] <surunveri> hi. i accidentally removed plasmaworkspace panel when i was trying to remove another panel... Any idea how to get it back?
[22:05] <James147> surunveri: right click on the desktop > add panel
[22:09] <surunveri> thx
[22:09] <surunveri> :D
[22:10] <surunveri> hmm
[22:10] <surunveri> what's the name of the startmenu widget? :D
[22:13] <James147> surunveri: application launcher
[22:14] <surunveri> hmm
[22:14] <surunveri> oh it's the other one :D
[22:16] <cypr1nus> Hello everyone. I would like to ask, how can I help with Kubuntu development? I would like to help as a developer.
[22:17] <James147> cypr1nus: #kubuntu-devel would be a god place to ask
[22:17] <cypr1nus> James147: thanks
[22:22] <James147> cypr1nus: also this might be helpful: http://www.kubuntu.org/community/contribute
[22:23] <Toast> Has anyone ever run a remote X program, only to have it run with the the configuration from your local machine? I'm not talking about window chrome, etc, but showing things that only the local machine would have access to.
[22:24] <cypr1nus> James147: been there. And programing section is ok for me. I would like to get some human feedback as i can find there things about tutor.
[22:25] <laler> Hey
[22:25] <laler> Can anyone help me get a shell on my other pc trough metasploit
[22:27] <laler> o wait wrong channel
[22:31] <RadSurfer> HELP: how do I go into a Terminal-based run-mode that CLOSES Xwindows completely ?
[22:32] <James147> RadSurfer: umm... alt+crtl+f1 to switch to a tty, then you can run "sudo stop kdm" to stop kdm..
[22:32] <RadSurfer> Ok.
[22:33] <RadSurfer> "kdm sto/waiting" good.
[22:35] <RadSurfer> and to start it again: "kdm start" ??
[22:49] <James147> RadSurfer: "sudo start kdm"
[22:55] <dante__> hay guys can you tell me how to chat in facebook i meen to make cht whit facebook in a window ??? please i can do that in ubuntu but in kubuntu
[22:56] <dante__> i dont now how
[22:56] <dante__> so can you hel me
[22:56] <dante__> help* me please
[22:59] <rork_> dante__: Should be browser specific I think? Try using the same browser as in ubuntu, you can install it from the repo's
[23:00] <dante__> yea i now how in rowser i meen i window like skype or this chat
[23:05] <RadSurfer> HELP please! I tried to fix this darn display bug and now all I get is that 1st Blue Kubuntu screen! is there some way I can get into "failsafe" mode from here? HELP!
[23:06] <RadSurfer> Hello?!? Is there anything I can do to fix this situation please?
[23:08] <RadSurfer> it responds to CtrlAltDel, and Shutdown button!
[23:08] <RadSurfer> Surely theres some way to get into Failsafe mode!
[23:11] <effie_jayx> hello all
[23:11] <effie_jayx> been trying to fix microphone issues with my laptop, anyone have an infamous realtek Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
[23:12] <effie_jayx> mmm I gues this could be an ubuntu issue not justa kubuntu issue
[23:32] <Nakkel> How do I find out which packages are blocking my upgrade to 4.5.3? Now it tries to uninstall some packages that I presume are somewhat essential, like plasma-desktop and kdebase-workspace.
[23:47] <RadSurfer> whew! that was exciting. all back to "normal" again.
[23:47] <RadSurfer> at least it proves 'Xorg.conf' is read. just need to get it working now.