[00:40] <kristian-aalborg> hello
[04:14] <baggar11> Hdale85: google for "modeline generator"
[16:04] <philobyte> have ubuntu 10.10, tuners work, (watching with mplayer), but mythtv always says ''tuner unavailable''  ... ideas?
[16:16] <gregL> philobyte, Did you do all 4 steps of the set up???
[16:21] <philobyte> which four steps?
[16:33] <philobyte> fwiw, I had a working config for years, but then did changed h/w (32->64bit), hasn't worked since...
[16:49] <gregL> philobyte, When you run Mythtv-setup..You define your cards,input connections,sources,etc.. You did that right?
[16:50] <philobyte> GregL: yes that is all done, settings were working with old mb/processor.
[16:50] <gregL> philobyte, Do you have a database from your old set up?
[16:50] <gregL> back-up that is..
[16:51] <philobyte> GregL:  I did a drop database, to restart fresh (after futzing around a lot) so everything is fresh now
[16:54] <gregL> If you had a back up,you could have just installed a back up and it would have been fine...I have migrated from 32 to 64 and it really made no difference here...I would look at permissions on the cards and post your Dmesg and back end logs here it may be someone can see the problem...
[16:55] <gregL> Use pastebin of course..
[16:57] <gregL> You might even even try posting to #mythtv-users also...There are more people in and out there that maybe able to help you..
[16:59] <philobyte> I had done that, and all the old stuff was there, fe spoke to be (on same machine) just fine, but the tuners were un-available.  my dmesg is pretty big, what part of it are you interested in?
[17:06] <philobyte> GregL:  posted the whole thing:   http://pastebin.com/MMPhnnCa
[17:06] <Zinn> [pastebin.com] root@alu:~# ls -al /dev/video* crw-rw----+ 1 root - Mythtv_dmesg+permissions
[17:07] <philobyte> oh no... did the mess get posted?  sorry about that...
[17:14] <gregL> philobyte, I don't see anything wrong in that file... Perhaps someone with more experience than I will show up and lend you a hand...
[17:15] <philobyte> GregL: thanks for having a look.
[17:15] <gregL> Does your backend log show any problem?
[17:18] <philobyte> GregL: nothing I can see, I restarted the backend and appended the log to the pastebin...
[17:24] <gregL> Do you have the capture cards set right vl4 or ivtv?  Sometimes people set the wrong card type..They choose vl4 when it should be IVTV,or vice versa..
[17:36] <philobyte> hw is hauppauge 500 ( 2x 150 on a card.) I picked... ivtv, and it shows up as MPEG... I don't get how the db works, I set stuff up under ...  It worked now... I used my own personal account to set it up... but then logged in as mythtv user, and the tuners were not there, so I added them, and they show up as tuner3 and 4 and available, while 1 and two are not.
[17:40] <gregL> yeah,thats the way it works..You would need to remove all cards and readd them and it usually will put them back to one and two... So it's working now?
[17:57] <philobyte> yeah, I get it now... I have to make sure I use only mythtv user when doing mythtv-setup, otherwise it goes wonky with no error messages...