[00:00] <Dr_Willis_> konam:  try   clicking on the 'trash' icon on the left hand side in nautilus?
[00:00] <marcusdavidus> nvm]
[00:00] <shigeo> samantha-, oh yes now i remember. (shame on me! i had this very issue a month ago at work...). there seems to be a bug in the current installer.
[00:00] <Dr_Willis_> konam:  i dont reccomend using nautilus as root.
[00:00] <marcusdavidus>  im  fucking idiiot
[00:00] <marcusdavidus> i find out olk
[00:00] <marcusdavidus> :P srry to much alko
[00:01] <marcusdavidus> ]cheers
[00:01] <samantha-> shigeo, fix?
[00:01] <elky> marcusdavidus, you're not very coherent, might i suggest you go sleep it off.
[00:01] <play4> exit
[00:01] <Dr_Willis_> konam:  or the url -> trash:///
[00:01] <blud> soreau: i did that rmmod ati_remote and mythtv still crashes when you exit it
[00:01] <blud> never did that before
[00:02] <blud> but i think i need to solve this other issue first to see if it clears it up... Problem is mythtv loads at start but also mythbuntu prompts me to enter a keyring password and then a wpa2 password
[00:02] <blud> like every time i boot
[00:02] <shigeo> samantha-, i stumbled upon this bug while trying to install to a system with a fakeRAID. it seems that the installer (at least the graphical ubiquity installer) installs grub to the /dev/sda per default. my last status of this bug is that you have basically two choices......
[00:02] <blud> how do i make it not do that? i just want to have it save my wireless password and never ask me again
[00:02] <Dr_Willis_> blud:  you can set the keyring to not ask for its unlock password.
[00:02] <konam> Dr_Willis_ i can't open that url, writing it on nautilus using 'location'
[00:03] <Dr_Willis_> system -> perferances -> passwords and enc.   right click on the login item,. and set a blank password. it will ask to 'use unsafe storage'
[00:03] <Dr_Willis_> konam:  and the trash icon on the left hand panel does what?
[00:03] <shigeo> samantha-, you can either wait for ubuntu 10.04.2 next month or so (assuming you want the LTS), or you can boot into your system with external help, then issue a "grup-install /dev/sdX" where sdX is your hard disk.
[00:04] <samantha-> shigeo, does lilo exhibit the same behavior? i'm certainly not married to grub.
[00:04] <Dr_Willis_> samantha-:  lilo is so old.. its proberly going to be very problematic these days
[00:04] <solo_> Please help me anyone!!! I get from wicd "Connection Failed: Unable to Get IP Address". wicd sees the signal and scans the network but can not connect. The network is open. The first time the connection was successful but after 2 minutes gone. When working in opensuse with native drivers such samples do not. Everything is stable and long on the same network and on the same laptop.
[00:04] <blud> Dr_Willis_: where do i set keyring settings or find keyrings or whatever
[00:04] <samantha-> aand i'm installing 10.10
[00:04] <shigeo> samantha-, i would recommend using the "super grub disk" from http://www.supergrubdisk.org/ for booting your ubuntu, then issue "grub-install /dev/sdX"
[00:04] <Dr_Willis_>   blud   i just said ->    system -> perferances -> passwords and enc.   right click on the login item,. and set a blank password. it will ask to 'use unsafe storage'
[00:05] <Dr_Willis_> :)
[00:05] <blud> ah sorry didnt see, i was walking back and forth to the linux box
[00:05] <konam> Dr_Willis_ there's nothing there..
[00:05] <Dr_Willis_> blud:  that icon has moved in 10.10 - compared to 10.04 i think.
[00:05] <Dr_Willis_> konam:  it may be the stuff is just getting deleted then.. not moved to trash.
[00:06] <solo_> Problem with Broadcom 4312 in Ubuntu 10.10
[00:06] <shigeo> samantha-, i like your attitude. i prefer LiLo myself on my other systems (gentoo and earlier slackware), but the ubuntu way is grub. LiLo does not have these problems per se, but the problem is not lilo, it's the ubuntu installer.
[00:06] <blud> Dr_Willis_: I am using mythbuntu, doesnt seem to be there..
[00:06] <Gadu> I've got a cam stream up and running on my website via webcam-server but I want to add sound. How can I achieve this?
[00:06] <Gadu> preferably in a way that won't cause them to be completely out of sync
[00:07] <Dr_Willis_> blud:   the binary name for the tool is 'seahorse' i think.
[00:07] <konam> Dr_Willis_ but... well, thanks
[00:07] <samantha-> shigeo, i first got a copy of slackware 1.something via an ftp-to-email gateway ... i had like 22 floppies uuencoded and emailed to me over a FidoNet gateway. my sysop was ... pissed.
[00:07] <konam> othe day i will ask again i guess
[00:07] <konam> thanks
[00:08] <Dr_Willis_> night all
[00:08] <solo_> I think it's time to go to sleep and wifi not working
[00:08] <samantha-> i'm surprised this bug wasn't caught. this seems like a pretty simple show-stopper case.
[00:08] <soreau> solo_: Soon enough, broadcom will be releasing open drivers so their hardware will justwork
[00:09] <soreau> until then, it's proprietary driver nightmare
[00:09] <blud> seahorse isn't even installed.. shoudl i install it?
[00:09] <blud> im using xfce (mythbuntu)
[00:09] <soreau> solo_: But you never said what wasn't working about it. If you can see your AP, you should be able to connect
[00:09] <epaphus> Hello, how can i remove a package including config files? with apt get
[00:10] <Gadu> I've tried using VLC to stream but watching it only tries to download an endless binary file rather than watching it
[00:10] <shigeo> https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/339724
[00:11] <gjm> epaphus: 'sudo apt-get purge'
[00:11] <solo_>  soreau: I get from wicd "Connection Failed: Unable to Get IP Address" but signal from network is good
[00:11] <rautamiekka> I need to verify many files' CRC, so tried to §crc32 file.rar | grep - file.txt§ but it searches for the dash in the txt instead of the output of 'crc32'. Also tried replacing the dash with "{}" without output from grep, and reading grep's manpage was useless unless I missed something.
[00:12] <soreau> solo_: Is dhcp enabled? Is MAC Address Filtering on the AP?
[00:12] <gjm> epaphus: and in future read man pages
[00:12] <samantha-> shigeo, i should perhaps retry with ext3? i'm not married to ext4 by any stretch. this is a crappy almost-netbook.
[00:12] <soreau> solo_: The other problem may be having NetworkManager, nm-applet and wicd all running at the same time
[00:12] <shigeo> samantha-, i know. it probably has a lot to do with moving to grub2 or such. try the solution with the super grub disk and issuing "grub-install"
[00:13] <soreau> solo_: Instead you could try killing all processes then connecting with 'iwconfig wlan0 essid <essid> && dhclient wlan0'
[00:13] <samantha-> shigeo, i booted from the usb stick to a root prompt. grub-install /dev/sdb didn't resolve it.
[00:13] <chaozuper> i know it's unrelated but happy new year ubuntu users!
[00:14] <samantha-> i'll probably be cleaning a bathtub at midnight.
[00:14] <mdpatrick> I'm running AMD64 on a quadcore processor... how can I tell if a process is using more than 1 core? (i.e. it's utilizing the processor correctly)
[00:14] <em> is it possible for the computer to suspend without dropping the wifi?
[00:14] <Saladin> !quadcore
[00:14] <smw> em, they are mutually exclusive
[00:15] <shigeo> samantha-, nah i don't think it's a filesystem issue. i also don't think you can grub-instal from a usb-stick. because the usb stick has another environment and other parameters, so it won't install grub correctly. you should really try grub-install from your system. isn't there an option "boot from first hard disk" on the usb stick?
[00:15] <iNdO> yo
[00:15] <smw> mdpatrick, you can use htop
[00:15] <em> smw: then it should be possible for the laptop lid to close without suspending.
[00:15] <smw> mdpatrick, it gives cpu usage by cpu.
[00:16] <smw> em, it is, that is a power setting
[00:16] <samantha-> shigeo, when the installer writes the mbr to the usb stick, that is the same as "boot from the first hard disk." root is /dev/sdb1, and /sda1 is unused.
[00:16] <em> smw: and on the HP Pavilion dv6t every time you close the lid it either suspends or goes blank and you never get the display back.
[00:16] <em> smw: not on the HP Pavilion dv6t
[00:16] <smw> em, that is an overheating problem I think
[00:16] <em> I dont think so.
[00:16] <smw> em, for some reason the gpu never restarts...
[00:16] <em> It's some sort of power management or kernel bug.
[00:17] <em> yes the gpu never restarts
[00:17] <smw> em, I have no idea why. It is probably a driver/kernel bug
[00:17] <smw> em, I have the same problem
[00:17] <rautamiekka> How to pipe the output of "crc32" to grep or something which searches for the presence of the output in the given text file ?
[00:17] <em> in power management you only have four choices for what happens when the lid is shut: blank the screen, suspend, hibernate, or shut down.   If you choose any but the first it will lose wifi, if you choose the first it loses the display forever until you turn it off and back on.
[00:17] <em> smw ^
[00:17] <solo_> soreau: try
[00:17] <bluezone> anyone have experience with install nvidia drivers? the installation fails, in the log it says: ERROR: You appear to be running an X server; please exit X before installing.
[00:18] <mdpatrick> smw: If a process goes above 25% does that imply it's using more than 1 core?
[00:18] <blud> ok so, I have this keyring that keeps asking for a password every time I boot the computer, I want to edit it somehow so it doesn't ask me for a password, so it just saves it forever.
[00:18] <smw> mdpatrick, no
[00:18] <Josh_> Blue... Redraft in recovery and then install nvii
[00:18] <usr13> bluezone: As it says, you need to turn off the Xserver to install in the way you are going about it.
[00:19] <Josh_> Restart in recovery rather
[00:19] <romana> happy new year everyone ! ;)
[00:19] <bluezone> hmm
[00:19] <samantha-> romana, another regeneration?
[00:19] <bluezone> what if i just end the process, i don't trust installing things in recovery
[00:19] <romana> samantha huh?
[00:19] <samantha-> romana, if you don't get it now you never will :)
[00:19] <Josh_> You could use a console login
[00:19] <romana> samantha i know, right! :D
[00:20] <nawk> Is there a kernel option should I could specify during the loading of the LiveUSD (or LiveCD) that allows me to set the size of the tmpfs?
[00:20] <nawk> for the '/'
[00:20] <usr13> bluezone: First you will need to move off of the GUI to a terminal.  Ctrl-Alt-F6
[00:20] <shigeo> samantha-, did you try the option "boot from first hard disk"? i'll check another idea meanwhile...
[00:20] <iNdO> happy new years ya'll
[00:21] <usr13> bluezone: And then kill the Xserver  sudo pkill gdm
[00:21] <IAcceptEverythin> What is the name of the Aircraft Systems Engineering App in the ubuntu library?
[00:21] <R0b0t1> Hello. I have a device (pen tablet) which has "custom" thingymajigs on it. http://paste.pocoo.org/show/312633/ Is some sample output, The top is the #1 special button, the lower is a mouse move to near the top of my screen. (xev doesn't get events from these buttons). How can I set these up?
[00:21] <konam> Dr_Willis_ ok, had to come back, the files were convoluted in some .trash folders on my home folder. i just recovered about 5gbs after shift-delete them
[00:21] <konam> thanks
[00:21] <bluezone> usr13,  out or curiosity what exactly is an xserver, if is not too much to ask
[00:21] <samantha-> shigeo, i'm using the mini iso. there is no boot to first hard disk option, only rescue.
[00:22] <bastidrazor> usr13: that is a horrible way to stop gdm.. use sudo sevice gdm stop .. instead
[00:22] <Musigreg> Hello!
[00:22] <Musigreg> Happy new year everyone!
[00:22] <yayoj1> Happy New Year!!
[00:23] <solo_> soreau: with 'iwconfig wlan0 essid <essid> && dhclient wlan0' I get new interface -- wlan0:avahi inet addr:169.254.8.46
[00:23] <yayoj1> Ubuntu is great right?
[00:23] <Musigreg> I guess so
[00:23] <Musigreg> I installed it today
[00:23] <R0b0t1> No, it's absolutely terrible.
[00:23] <Musigreg> it's my first run
[00:23] <R0b0t1> I wouldn't suggest using it -- it's bad for your health.
[00:23] <solo_> So I have wlan0 and wlan0:avahi ???
[00:23] <shigeo> samantha-, can you go into rescue? i don't know that option. maybe you can try it and see if it gives you some happy time. by the way: can you choose _not_ to install grub anywhere so that your stick doesn't get fried?
[00:23] <yayoj1> wow..well guess its time to switch to mac.
[00:23] <R0b0t1> Causes cancer (only in California) and stuff like that.
[00:24] <samantha-> shigeo, i'm trying a rescue install now. and i have the option of installing without a bootloader (or lilo, which i also haven't tried).
[00:24] <R0b0t1> Oh no! Mac is even worse. It causes cancer AND retardation.
[00:24] <Musigreg> I need a little help from you, is someone available?
[00:24] <mdpatrick> What's the easiest way to see if a process is appropriately utilizing amd64 architecture or not??? Htop is neat, but I'm not sure it's telling me what i'm looking for.
[00:24] <yayoj1> ha....ohhh....cancer huh?
[00:24] <bastidrazor> R0b0t1: and we see you've already been infected.
[00:25] <GeekSquid> !ask | Musigreg
[00:25] <yayoj1> who me, never
[00:25] <Musigreg> Ok, thank you
[00:25] <karma_police> anyone ever use gadmin-samba?
[00:25] <yayoj1> samba, somebody like's windows
[00:26] <yayoj1> whats the question?
[00:26] <samantha-> ooh, rescue mode has a "reinstall grub" feature where you can redo the boot loader with your choice of parameters. we'll see.  ah, that worked.
[00:26] <smw> !anyone | karma_police
[00:26] <karma_police> i'm trying to network my files on ubuntu so that windoze users can access them
[00:26] <mrdirtft> hello ladies
[00:27] <smw> mrdirtft, hello miss ;-)
[00:27] <Musigreg> Well, I have a problem with a file who is supposed to be an iso copy from one of my dvds, but i can't mount it. It says it's not a iso format something.
[00:27] <frxstrem> how can I make Google Chrome work in guest sessions?
[00:27] <samantha-> shigeo, ty for the pointer :) is there an equivalent to debian's tasksel, post-install? to save time on my umpteenth installation, i only installed the base system, now i need to install the rest
[00:27] <r00t4rd3d> karma_police, samba
[00:27] <smw> Musigreg, how are you trying to mount it?
[00:27] <smw> frxstrem, it should work
[00:27] <yayoj1> musigreg: sounds like you copied the file wrong to the disk.
[00:28] <GeekSquid> samantha-: sudo apt-get install tasksel ... ubuntu came from debian, therefore it does
[00:28] <karma_police> i'm trying to set my network up and cannot get it working.. i'm a noob.. here is my smb.conf file: http://pastebin.ubuntu.com/549184/
[00:28] <shigeo> samantha-, yes! so everything works now?
[00:28] <Musigreg> yayoj1, I try to mount it with right click and then "mount", and the thing is, I can mount it on a windows machine
[00:28] <samantha-> shigeo, apparently. it booted to prompt and tasksel appears to be thinking about what i've asked it to do.
[00:29] <blud> k i solved my keyring issue.. just had to go edit the wireless connection, add the password there, and check the box "available to all users"
[00:29] <Musigreg> I tried burning it, but it's a dual layer dvd and i don't have a dual layer burner
[00:29] <frxstrem> smw: I just get an error saying something like "Failed to move to new PID namespace: Operation not permitted" or something like that
[00:29] <samantha-> there it goes. downloading 22 of 892.
[00:30] <smw> frxstrem, run it in a terminal, then pastebin all useful info.
[00:30] <smw> frxstrem, let me try it
[00:30] <Valkyrie> OKAY.
[00:30] <Valkyrie> So now I'm HERE.
[00:30] <karma_police> the files and folders i'm trying to share are on a usb hdd
[00:30] <MrUnagi> how can a user be chrooted via ssh but not via sftp
[00:30] <frxstrem> smw: I ran it in terminal, and told you the error message
[00:30] <shigeo> samantha-, good. thank $deity we didn't have to use LiLo (somehow i don't think ubuntu likes LiLo).
[00:30] <Valkyrie> How do I edit the Applications menu in gnome by hand.
[00:30] <Valkyrie> I'm meaning the actual FILE. I'm sick of gnome not adding applications. No I don't run Ubuntu, I was brought here by #gnome.
[00:31] <samantha-> shigeo, i thought make zlilo was the best feature they ever added to the kernel ... saved me so much trouble ...
[00:31] <yayoj1> musicgreg: if it's an iso format copy of software you have to make sure the file is saved to the disk in that format or the copied image is useless.  look for an iso mount application in the software center
[00:31] <smw> frxstrem, yeah, I just tested it. I have no idea. I am going to look it up
[00:32] <shigeo> samantha-, just for your info: my next try would have been to use "sudo grub-install --root-directory=/media/0d104aff-ec8c-44c8-b811-92b993823444 /dev/sda --recheck". or maybe use the usb live environment and then chroot into your installation.
[00:32] <Tigger__> MERRY NEW YEAR
[00:32] <Musigreg> yayoj1, I tried every mount applications I found, and they told me the same thing.
[00:32] <frxstrem> smw: umm...could it possibly be because I use the dev version?
[00:33] <smw> frxstrem, nope, I am reading some technical info about it.
[00:34] <mdpatrick> How do I check to see if the partitions I setup during my install are appropriately mounted at the correct mount points?
[00:34] <smw> frxstrem, frxstrem it is not something that you can fix probably
[00:34] <Musigreg> yayoj1, is there a way for me to know which iso format is it? Cos all I've read was that it wasn't one particular format. But nothing tells me what it is...
[00:34] <samantha-> mdpatrick, sudo mount
[00:35] <smw> frxstrem, http://code.google.com/p/chromium/issues/detail?id=31077
[00:35] <Valkyrie> How do I edit the Gnome Applications menu by hand?
[00:35] <yayoj1> musicgreg: when you right click the application, go to scripts and then mount iso.
[00:35] <yayoj1> musicgreg: try that
[00:36] <vlt_> Hello. A Xen question: What is the most elegant way to automatically run a Xen domU after dom0 has finished booting?
[00:36] <play4> happy  new  years  eve   people
[00:36] <smw> frxstrem, you can use --no-sandbox
[00:36] <yayoj1> musicgreg: or what samantha wrote for terminal command.
[00:37] <shigeo> mcpatrick, if you just want to look at partitions, 'mount' without sudo should be enough.
[00:37] <mdpatrick> shigeo, samantha-: That did it. Thanks :)
[00:37] <Musigreg> Hum...
[00:38] <yayoj1> musicgreg:no luck
[00:38] <shigeo> samantha-, you wouldn't accidentally know how i can create some cool xorg.conf with my ubuntu?
[00:38] <Musigreg> Could it be that the folder which the iso is in is named with a blank?
[00:38] <samantha-> shigeo, nope. imo X is evil. long live the cli. :)
[00:38] <GeekSquid> vlt_: xen questions in  #xen please
[00:39] <solo_> tell me what USB is an external modem is better to buy that would not test with WiFi in Ubuntu.
[00:39] <yayoj1> musicgreg: named with a blank?  what do you mean?
[00:39] <Musigreg> in the path name
[00:39] <stealthc> hmmm just wondering if anybody here an envision remote execution as being better facilitated than with a modified version of vbox?
[00:39] <Musigreg> yayoj1,  there's a space in the name of the folder
[00:39] <stealthc> can envision not an...lol
[00:39] <yayoj1> musicgreg: so it's something like this"dflg.blank"
[00:40] <Musigreg> yayoj1,  sorry i'm not english, I try hard ^
[00:40] <rautamiekka> How to pipe the output of "crc32" to grep or something which searches for the presence of the output in the given text file ?
[00:40] <stealthc> I was thinking vbox was a good choice because it can keep execution isolated to a virtual machine
[00:40] <stealthc> and is open source
[00:40] <Musigreg> yayoj1, no it more something like media/doc 2/iso.iso
[00:40]  * Shaun hates the person that has a script set up to steal my nick whenever I go offline
[00:40] <chaozuper> how do i make firefox 4 in ubuntu look like it does on vista?
[00:40] <Procik> Ñ íîâûì ãîäîì!
[00:40] <domjohnson> Hi
[00:40] <Silicium> hi tehre
[00:41] <GeekSquid> rautamiekka: cat /path/to/crc32 | grep searchword
[00:41] <Silicium> is it normal that encryptFS is so slow on read/file access?
[00:41] <Silicium> the seektimes are very crap
[00:41] <Musigreg> yayoj1, what do you call the space between two words?
[00:41] <Procik> ðóññêèå  åñòü?
[00:41] <rautamiekka> GeekSquid: "crc32" is a Perl script, mind you, which checks the file's CRC and displays it.
[00:41] <IAcceptEverythin> whoa. ubuntu is cool. howard stern is my idol now i guess. thanks for your help. ttyl
[00:42] <GeekSquid> rautamiekka: perl crc32 | grep search
[00:42] <boraklavun> happy new year
[00:42] <boraklavun>  I was late sorry about that
[00:43] <yayoj1> musicgreg: misc.
[00:43] <GeekSquid> boraklavun: you are early, i am in California
[00:43] <yayoj1> musicgreg: drag the file to the desktop, then try the right click to script then mount
[00:44] <alfred> what is the best way nto encrypt the laptop?
[00:44] <shigeo> alfred, use ubuntu alternate installer.
[00:44] <skullboy> alfred, did u try truecrypt
[00:45] <lwizardl> ok i'm starting to think this laptop just wasn't designed for linux to be used on it everything isn't working without lots of modding
[00:45] <alfred> shigeo, I will try truecrypt
[00:45] <stealthc> truecrypt with aes 256
[00:45] <lwizardl> in 10.10 how do I get my headphone jack to work when i plug them in
[00:45] <lwizardl> right now my audio only works from the internal speakers
[00:45] <Musigreg> yayoj1, copying
[00:46] <frxstrem> how can I find out what device file(s) represents audio in/out?
[00:46] <alfred> skullboy, is it the same as Easy Crypt ?
[00:46] <Musigreg> yayoj1, ok I mounted it, and a new icon appeared with the name of the iso
[00:46] <jimmyzasdf> can i turn off the feature which asks for my password whenever i change a system setting?
[00:46] <samantha-> i *lublublub* my SSDs.
[00:46] <Musigreg> yayoj1, and when i open it, there's no file inside
[00:47] <skullboy> alfred, no it is way more scure
[00:47] <alfred> skullboy, I will install it,
[00:47] <skullboy> alfred, secure**
[00:47] <alfred> skullboy,  I hope I do not mess things
[00:47] <rautamiekka> GeekSquid: It's run by simply saying "crc32". Syntax=§crc32 <file.ext>§. Tried §crc32 file.rar | grep sums.txt§, no output as if the sum wasn't in the file when it really is in there.
[00:47] <skullboy> alfred, ok let me now how it goes
[00:47] <Musigreg> yayoj1, But the iso is 5.5Gig
[00:47] <yayoj1> musicgreg: yea the file was copied wrong.  you gotta re-download the file from where ever you got it.
[00:48] <skullboy> alfred, just use a .deb if u dont wanna mess up
[00:48] <alfred> skullboy, will it ask for the passkey when I restart the computer or it will when I log in ?
[00:48] <Musigreg> yayoj1, well I got the from burning a dvd which i don't have anymore...
[00:48] <alfred> skullboy, as newbie I used the ubuntu software center
[00:48] <rautamiekka> GeekSquid: No difference with §grep -i§
[00:48] <skullboy> alfred, it will ask when u restart
[00:48] <Musigreg> yayoj1, nevermind, thank you anyway for your time
[00:49] <yayoj1> musicgreg: yea sure
[00:50] <alfred> skullboy, it asked me about truecrypt if installed , I download it
[00:50] <alfred> how to install it now ?
[00:50] <alfred> I extract it
[00:50] <alfred> skullboy, the command sudo dpkg -i name ?
[00:51] <skullboy> alfred, download the .deb package and run it
[00:52] <dhanijeremy> does anyone know when is the release date for Natty Narwhal
[00:52] <alfred> skullboy, I can t get the .deb
[00:53] <p_res> dhanijeremy: See #ubuntu+1
[00:53] <skullboy> alfred, your right there is not
[00:53] <alfred> skullboy, I miss the command to make it exe file
[00:53] <dhanijeremy> skullboy: thanks!
[00:54] <alfred> skullboy,  where it says +x  and after ./make
[00:54] <alfred> I do not remember them
[00:54] <skullboy> alfred, make && make install
[00:55] <jospams> happy new year
[00:55] <alfred> skullboy, didn t work
[00:55] <hipitihop> I have an ISP who's link drops out every now and then. What log should I look at to see at what time my wan link went down ?
[00:55] <Animagladius> happy new year
[00:55] <skullboy> alfred, did it give output
[00:56] <alfred> no
[00:56] <superkuh> I am using 8.04. When I drag windows with the mouse in Gnome a transparent grid is shown moving instead of the window. How do I enable full window drag/movement animation?
[00:56] <bastidrazor> hipitihop: /var/log/daemon.log shows when things you might find interesting and also /var/log/syslog
[00:58] <blud> ok fixed my problem of mythtv crashing. just had to uninstall lirc
[00:58] <blud> thanks for the help tonight people
[00:59] <xim_> i got a dual head video card (nv gts 450) and I am trying to set up multimonitor in nvidia-settings following https://help.ubuntu.com/community/NvidiaMultiMonitors but they are mirrored and I want them seperate, i tried twinview and 'seperate x' any ideas?
[00:59] <alfred> skullboy, do you know what is the command to make a file executable in linux?
[01:00] <xim_> chmod p+x
[01:00] <xim_> sorry, thats chmod o+x
[01:00] <alfred> xim_, thanks that s what I was looking for
[01:01] <alfred> xim_, what is the next command ? to install the file ?
[01:01] <soreau> blud: cool
[01:02] <usr13> alfred: chmod
[01:02] <xim_> alfred, i dont know what you are doing so i dont know whats next
[01:02] <usr13> alfred: chmod +x <file-name-here>
[01:02] <alfred> xim_, I donwloded a file, is not .deb, so I want to install it ( it is truecrypt)
[01:02] <alfred> usr13, done it
[01:03] <alfred> but what is after that ?
[01:03] <alfred> dpkg ? or ?
[01:03] <usr13> alfred: ./<file-name-here>
[01:03] <xim_> alfred to run the file if it is an executable alot of times jsut do ./filename
[01:03] <xim_> or sh filename
[01:03] <usr13> alfred: or sh <file-name-here>
[01:03] <alfred> xim_, Yes
[01:03] <alfred> done
[01:03] <SPooN> so, #ubuntu, I was hoping someone could shed some light on what KDE is/means, and what gnome is/means compated to that. anyone want to contrib?
[01:04] <usr13> SPooN: They are window managers
[01:04] <pulgoki> Question, my girlfriend has a linksys wrt54g2 router.. she connects everything to it using the Wi-Fi Protected Setup Button... Can Ubuntu be made to connect to the router using by using the button as well?
[01:04] <SPooN> so if I"m using ubuntu, then I'm on gnome, which means kde applications will not work, correct? usr13
[01:04] <xim_> they handle putting the boarders around your programs so you can drag them around, and multitask between them, they usually work with each other these days
[01:05] <SPooN> heelo Adam__  and solifex
[01:05] <usr13> SPooN: You can run KDE apps, you just have to install some KDE libraries
[01:05] <Raydiation> do i absolutely need 4.6gb free discspace?
[01:05] <SPooN> usr13, ok then. thank you
[01:05] <GeekSquid> SPooN: K desktop environment is just a different look that uses a different toolkit ... and no, you can run kde apps in gnome and viseversa
[01:05] <Raydiation> i thought of installing it on a 4gb usb
[01:05] <xim_> i use gnome and ktorrent, and play tetris in kblocks
[01:05] <SPooN> what are you installing that needs 4.6gb Raydiation
[01:05] <Raydiation> SPooN: ubuntu ofc
[01:06] <coz_> Raydiation,   its going to be far slower running from usb than from a hard drive
[01:06] <yayoj1> sPoon:just enable kde in ccsm
[01:06] <Raydiation> coz_: i dont have a hd
[01:06] <SPooN> Raydiation, what coz_  said
[01:06] <coz_> Raydiation,  ah ok   nevermind then :)
[01:06] <Raydiation> im just gonna use it as inet pc
[01:06] <Guest43508> hi, I've just installed Xubuntu 10.10 and it only detects one of my two displays on GeForce 6200
[01:06] <coz_> Raydiation,  then by all means run it from  usb
[01:06] <usr13> SPooN: If you try to install a KDE application, (via the package manager), the dependencies will automatically be installed, so it's no problem
[01:06] <Raydiation> iirc it needs way less than 4gb
[01:07] <coz_> of course with usb3   this will change things
[01:07] <SPooN> ok thanks user13
[01:07] <alfred> thanks guys I installed now I will reboot and try it out, I hope I can login :)
[01:07] <SPooN> good luck alfred
[01:07] <usr13> alfred: Time to celebrate :)
[01:08] <Senix> so i've installed Ubuntu onto my laptop, I wanted the notebook remix (thats what i installed) but it installed the desktop edition for some reason...is there a way to change this setting without reinstalling?
[01:08] <alfred> already done 3 hours ago :D
[01:08] <Guest43508> Xubuntu comes with novueau driver yes?
[01:08] <usr13> Senix: I would stick with what you have.
[01:08] <xim_> ahh the joys of beginning using linux, "i spent 2 hours to get truecrypt installed, now i hope i can still log in" ;P
[01:08] <sagaci> Senix: what .iso image did you install from
[01:09] <Senix> sagaci, this image here http://www.ubuntu.com/netbook/get-ubuntu/download
[01:09] <usr13> Senix: Senix you can customize it to  your likeing (on your own) which is not much more than optomizing things for the small screen.
[01:10] <coz_> Guest43010,  it should
[01:10] <Senix> usr13, look i want to try the netbook edition on my NETBOOK
[01:10] <coz_> Guest43010,  that doesnt mean you will have 3d acceleration with it however
[01:10] <Saladin> i got told that desktop would be better for netbook unless u have touch screen
[01:10] <SPooN> !mint
[01:10] <usr13> Senix: Then re-install with remix
[01:11] <coz_> Senix,   you might fair better with  the upcoming natty  11.04...even though in alpha  it no longer uses mutter  but compiz instead
[01:11] <Rena-> well the wiki says it supports 3D and multihead on my card, but I only see one display in settings
[01:11] <sagaci> Saladin: and that would generally be correct
[01:11] <coz_> Senix,  although...as I mentioned, it is still alpha
[01:11] <SPooN> coz_, are there any pointers as to when natty will come out stable?
[01:11] <zebastianortis> http://freedomainradio.com/BOARD/forums/p/28810/221573.aspx#221573
[01:11] <Senix> coz_, thank you for the recommendation
[01:12] <coz_> SPooN,   yep  on   2011  april  thus  the numbers  11.04
[01:12] <coz_> :)
[01:12] <SPooN> if it comes out on my birthday I will... well.... yea. april 7th
[01:12] <coz_> Senix,  you can either download the alpha cd or the daily build which is slightly larger than a cd  I blieve
[01:12] <FishFace> xim_: Don't know if this helps, but my dual screen looks like this - http://www.picpaste.com/pics/1Selection_005-GjY5rHsd.1293844293.jpeg
[01:12] <sagaci> SPooN: doubt it, usually late april
[01:12] <coz_> SPooN,   yep by the end of april
[01:12] <Senix> coz_, may i get a URL for it?
[01:13] <SPooN> ubuntu.com
[01:13] <coz_> Senix,  sure which one the alpha cd or the daily?
[01:13] <sagaci> cdimage.ubuntu.com/daily-live/
[01:13] <Senix> coz_, daily build would be nice
[01:13] <coz_> Senix,      http://cdimage.ubuntu.com/dvd/current/
[01:13] <SPooN> Senix, see what sagaci said
[01:13] <Senix> ty coz_
[01:13] <coz_> Senix,  it is a dvd however
[01:13] <Senix> coz_, i have dvds do not worry
[01:14] <SPooN> ubuntu netbook 10.10 is the same thing or not as Unity?
[01:14] <coz_> Senix,   download that iso ...checl the md5sums also listed on that page with your download and if possible  , please burn it at 1x
[01:14] <Saladin> http://ubuntuforums.org/showthread.php?t=766683  <-- i asked b4 but would like to know if this works for most recent version ? 10.10?
[01:14] <sagaci> Senix: does your netbook have a dvd drive
[01:15] <Senix> sagaci, ever hear of booting from usb? its quite nice
[01:15] <bweb> hey, what's wrong if I enter 'ß' and I get no 'ß' on the server side (ssh access)?
[01:15] <coz_> sagaci,   good question
[01:15] <FalseLobster> Alright, so this is gonna sound crazy, but is there a way to install ubuntu from ubuntu ?
[01:15] <SPooN> Saladin, you might find that most of what is there is included in 10.10
[01:15] <sagaci> Senix: I know USB's quite well
[01:15] <coz_> Senix,   mm  I havent tried this from usb  but good luck with it... which video do have on that netbook?
[01:15] <Saladin> spoon just wondering as i used version 8.04 so out of loop
[01:15] <SPooN> Saladin, otherwise most of it should work, unless the software itself has disappeared
[01:15] <Senix> coz_, lemme check
[01:15] <sagaci> !unetbootin
[01:15] <SPooN> Saladin, yup.
[01:15] <coz_> Senix,  also .let me emphasize...this is alpha... expect  some bugs
[01:16] <xim_> FishFace, how do you get to that monitor preferences window?  I'm in the nvidia x server settings (in karmic)
[01:16] <Saladin> spoon should i try to put in those command lines and if i do will it hurt my install?
[01:16] <Senix> coz_, yes i expected bugs, I have been using Ubuntu since its 8.04 days
[01:16] <coz_> Senix,  and the best channel for natty  is  #ubuntu+1
[01:16] <SPooN> Saladin, have you installed 10.10 already?
[01:16] <sagaci> Senix: you might not get the unity interface anyway, depending on the video card
[01:16] <FalseLobster> I have a wubi install of ubuntu and I wanna do a full install on my usb drive.
[01:16] <Senix> coz_, my video would be "Intel Corporation 82801G"
[01:16] <FishFace> xim_: System, Preferences, Monitors
[01:16] <SPooN> my video card doesn't work with unity :(
[01:16] <xangua> !usb | FalseLobster
[01:16] <coz_> Senix,    that should work
[01:17] <Saladin> spoon not getting rdy as the machine i am on is getting it and also i am at work;)
[01:17] <coz_> SPooN,  which video card is it?
[01:17] <Senix> coz_, if only my wifi card was intel
[01:17] <SPooN> an ugly intel integrated one
[01:17] <coz_> SPooN,  although this should be talked about in #ubuntu+1  not here :)
[01:17] <xim_> fishface, they must not have that in karmic
[01:17] <Senix> coz_, its broadcom T~T
[01:17] <SPooN> coz_, didn't know that existed :P
[01:17] <coz_> Senix,   that one I dont know for sure....cant hurt to test out the live dvd though
[01:18] <FalseLobster> xangua: I've been at this for a while.  I have a very atypical set up I'm trying to create.  Trust me, I've done my research...
[01:18] <Rave1> FalseLobster, >>http://www.instantfundas.com/2007/08/install-any-linux-distro-directly-from.html
[01:18] <Senix> coz_, will try
[01:18] <SPooN> unless, of course, you don't have a dvd
[01:18] <coz_> SPooN,   #ubuntu+1  is the channel for  versions in the works
[01:18] <SPooN> haha thats a smart name
[01:18] <domjohnson> How do I set a symlink to be able to be accessed and executed by all users (i.e, in the 'other' section)?
[01:18] <FishFace> xim_: Yeah, I was on 10.04 and upped to 11.04 and this is how I have always seen it
[01:18] <xim_> ok thanks
[01:19] <FishFace> Yep...good luck on that.
[01:19] <SPooN> I wish my computer had more usb ports
[01:19] <SPooN> ./random
[01:20] <domjohnson> lol SPooN - I'm sure everyone does
[01:20] <SPooN> domjohnson, too true
[01:20] <SPooN> !unetbootin SPooN
[01:21] <SPooN> !unetbootin
[01:22] <SPooN> forgive the newbie question, but where is startup disk creator in the menus?
[01:22] <FalseLobster> GParted can create an NTFS partition, correct?
[01:22] <SPooN> yes FalseLobster
[01:23] <alfred> I am back, the ecrypt was not what I am looking for
[01:23] <FalseLobster> SPooN: System > Administration
[01:23] <FalseLobster> SPooN: if you need any help with setting up a live usb, I should a pro at this by the time I'm done with mine.
[01:23] <TyrantElf> Yeah guys, I need some help with a dual monitor setup
[01:24] <FalseLobster> I've certainly spend > 6 hours working on this.
[01:24] <alfred> I need encrytion from the moment I start my laptop.
[01:24] <SPooN> FalseLobster, I don't use live usb's I prefer to partition my harddrive, as its faster
[01:24] <alfred> where it ask me to input the passkey in order to continue the boot
[01:24] <nit-wit> alfred, truecrypt
[01:24] <SPooN> alfred, what are you doing O.o
[01:25] <alfred> SPooN, trying to install crypt to my HDD
[01:25] <alfred> nit-wit, I installed it
[01:25] <alfred> nit-wit, but why I do not get the screen when I start my computer to input the passkey ?
[01:25] <FalseLobster> SPooN: I just saw you lookin' at unetbootin stuff, so I figured I'd offer to help if you needed it... I agree with the speed, but I really don't know what else I'd do with such a massive flash drive.
[01:25] <SPooN> alfred, that was an attempted joke wondering what you were/are doing that requires encryption :P
[01:25] <SPooN> FalseLobster, true that, thanks for the offer :D
[01:26] <alfred> SPooN,  :D
[01:26] <alfred> SPooN, if you attend "Legal Aspect" class, you will run and encrypt your computer
[01:26] <SPooN> alfred, ok then haha
[01:26] <SPooN> should I use a cd or dvd .iso to make a USB startup?
[01:27] <alfred> SPooN, we had class about the cyber security law etc... and you have no idea what ever in your computer can take you few years in jail :D
[01:27] <alfred> even if you install some back track, that might take you to jail
[01:27] <alfred> SPooN, because it is considered as hacking or attack tool :D
[01:27] <SPooN> alfred, encryption can be cracked
[01:27] <alfred> that they didn t tell me :D
[01:28] <nit-wit> alfred, I haven't used it for whole OS just HD individually with data
[01:28] <SPooN> haha
[01:28] <Rena-> eh, I use disk encryption because there's little reason not to. :-p
[01:28] <alfred> :D
[01:28] <nit-wit> alfred, there is a manual I downloaded it.
[01:28] <rautamiekka> SPooN, alfred: "As long as human makes something, a human will breach it", said by my dad.
[01:28] <Raydiation> hm doesnt the fglrx driver offer h264 support?
[01:28] <SPooN> smart father
[01:28] <SPooN> rautamiekka,
[01:28] <alfred> rautamiekka, respect to your father, sure he is right
[01:29] <rautamiekka> SPooN, alfred: Yeah, figured he was correct in that.
[01:29] <alfred> rautamiekka, totta kai ;)
[01:30] <alfred> I do not know how I had the windows pop up when I restart my computer asking passkey to boot
[01:30] <alfred> now I can t get it back
[01:31] <asdas> mkdir is for making directory... how i can make file??? mkfile not work..
[01:31] <xim_> i put my new dual head vid card (nv gts 450) in my pcie slot (karmic) and blew away all my old nvidia drivers etc, then i added the ppa and installed nvidia-glx-256 and nvidia-settings.  when i first ran nvidia-settings it showed 2 screens in the layout, one on the right disabled, i enabled it to twinview and it just mirrored them, and then i switched to seperate x windows and rebooted and it still mirrors them. and now in the layout
[01:31] <xim_>  it doesnt show them both in the same layout it just switches between them in the layout from the drop down box
[01:31] <pulgoki> Question, my girlfriend has a linksys wrt54g2 router.. she connects everything to it using the Wi-Fi Protected Setup Button... Can Ubuntu be made to connect to the router automatically using by using the button as well?
[01:32] <Spaztic_One> I've got a game that I play that resets my resolution down to 800x600 when I exit. what is a command in term to let me resize my resolution without having to go to the monitor control?
[01:32] <xim_> i cant extend the desktop to the other one
[01:36] <rautamiekka> asdas: I believe you mean to make an empty text file. The "nano" is a text-mode text editor I use for anything done text-wise in text-mode. "nano FILENAME.EXTENSION" where 'FILENAME' is the file's name and 'EXTENSION' the extension of the file, like "py" for a Python script.
[01:37] <rewt> asdas, you can use touch to create a 0-byte file
[01:37] <rautamiekka> Ah, I've forgot about "touch"
[01:37] <asdas> rewt: how i can use that?
[01:37] <rewt> touch filename
[01:37] <imran_> hello everyone, I'm using Puppy linux which I know isn't Ubuntu but it's similar and no one on the puppy chat can help me - so please, at least try to help me?   I'm attempting to install a "Tenda W311U" adapter onto my Puppy linux, it's a USB WIFI b/g/n adapter....
[01:38] <asdas> rewt: how i can change a file name ?
[01:38] <SPooN> so, no harm/foul/offense intended, I'm just curious. But are all Ubuntu users Mint haters?
[01:38] <rewt> mv
[01:38] <imran_> the adapter won't accept any of the drivers im trying
[01:38] <rewt> SPooN, i like mints, but not too fond of mint chocolate
[01:38] <imran_> What to do next?
[01:38] <xangua> imran_: try a puppy channel please
[01:38] <geeknik> to whomever mentioned qbittorrent in here earlier today, thanks.. just started using it in place of utorrent.. =)
[01:38] <asdas> how i can change a file name ?
[01:38] <rewt> asdas: mv
[01:39] <rautamiekka> asdas: It would sound like you don't even know the basics of Linux.
[01:39] <asdas> mv file.txt filesss.txt ?
[01:39] <imran_> xangua: i did but people there said they knew nothing about networking... I was hoping since from what I hear and from what I've use puppy and ubuntu are somewhat similar, maybe you gyus could help...
[01:39] <rewt> yes, and with most commands you can use --help to see usage instructions
[01:39] <rewt> eg:  mv --help
[01:39] <asdas> rautamiekka: exactly i dont know anything thats why im asking help.
[01:39] <xangua> imran_: then try a networking channel¿
[01:40] <porkchop_> asdas: right click file in nautilus and rename
[01:40] <rewt> hah
[01:41] <asdas> the command??   "mv file.txt  renamed.txt" ???
[01:41] <rewt> mv --help
[01:41] <rewt> read that
[01:41] <asdas> im just asking
[01:41] <asdas> could u give answer on what i ask if you could i will appriciate it
[01:41] <asdas> dont give me --help etc etc
[01:41] <rewt> it answers your questions
[01:42] <asdas> [03:41:14] <asdas> the command??   "mv file.txt  renamed.txt" ???
[01:42] <asdas> a yes or not or a sample could help more..
[01:42] <rewt> yes, if you type "mv --help" it will answer that question
[01:42] <asdas> omfg
[01:42] <iNdO> anyonw know if its possible to play world of warcraft on ubuntu ?
[01:42] <asdas> could u answer or not
[01:42] <asdas> [03:41:14] <asdas> the command??   "mv file.txt  renamed.txt" ???
[01:43] <rewt> why are you so afraid of reading the help?
[01:43] <coz_> iNdO,  it is  but I havent done it
[01:43] <asdas> rewt: wtf?
[01:43] <asdas> answer.
[01:43] <p_res> Just do "man mv" for more in-depth info.
[01:43] <asdas> or dont speak.
[01:43] <xangua> !wine
[01:43] <xangua> iNdO with wine, check !appdb to see status
[01:43] <dnivra> iNdO, hope this helps https://help.ubuntu.com/community/WorldofWarcraft.
[01:43] <porkchop_> asdas: mv oldname newname
[01:43] <Photocopy> is there anyway to reset my ip address?
[01:43] <rautamiekka> asdas: You're not asking, you're repeating. That's why in IRC we always say your username as the first thing in a reply to catch your attention.
[01:43] <Photocopy> anything like that
[01:43] <rewt> asdas, you gotta learn how to help yourself.  you can't rely on others for everything you'll do.
[01:43] <asdas> porkchop_: thanks a milion..
[01:43]  * rautamiekka is now going for sleep.
[01:44] <asdas> rewt: <censored> that was a answser
[01:44] <bweb> echo $LC_ALL -> no output, is that right?
[01:44] <asdas> no read that read this
[01:44] <asdas> read bible
[01:44] <asdas> noob
[01:44] <FloodBot1> asdas: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[01:44] <rewt> asdas, it's not a bible, it's only a few lines
[01:44] <dnivra> bweb, yeah; the output would be redirected.
[01:44] <geeknik> rewt: you didn't break it down far enough. ;)
[01:44] <rewt> o.O
[01:44] <bweb> dnivra: how can I get the info which locale is currently set?
[01:45] <asdas> Im asking on how to rename, im new in linux so that dont show me anything
[01:45] <rewt> you didn't even try it
[01:45] <asdas> it will be more easy if you just answer on what i asked and not giving third parties answers.
[01:45] <Photocopy> -.- Does anybody know if there's a way in my router or computer to reset my IP address? Additionally, is there a way I can tell if I have a dynamic IP?
[01:45] <ggreene> need to access ip address through iptables via vncviewer can't seem to get it to work
[01:45] <dnivra> bweb, if $LC_ALL is the variable, just try 'echo $LC_ALL'. I'm not sure about how to get that info. i'll check.
[01:45] <rewt> FIRST line says:  "Usage: mv [OPTION]... [-T] SOURCE DEST", and a couple lines later says "Rename SOURCE to DEST"
[01:46] <rewt> it's not a third party's answer
[01:46] <rewt> it's the answer from the actual command itself
[01:46] <rww> !ot | Photocopy
[01:46] <dnivra> bweb, i'm not quite sure what you're looking for but the answer might be here https://help.ubuntu.com/community/EnvironmentVariables.
[01:47] <geeknik> rewt: and yet he calls you the noob. i needed a good laugh..
[01:47] <Photocopy> rww: if you know whether that's off topic or not, you know the answer
[01:47] <Fish-Face> Hi, I've recorded some video with Cheese, but it's too big. I would like to transcode it with ffmpeg, but there is an error whenever I try to do anything with ffmpeg to that file, or any video file that cheese produces
[01:47] <rewt> he did? i missed it :(
[01:47] <swazzy> hello
[01:47] <mdpatrick> Is there a way to sort aptitude/apt-get packages by *popularity* and view the,?
[01:47] <mdpatrick> view them
[01:47] <paq7512> what is a good cloud backup for 10.10?
[01:47] <geeknik> rewt: it's all good. i'm sure the next person will appreciate your help. =)
[01:48] <rewt> heh
[01:48] <mdpatrick> Or is there a nice curation of useful apps somewhere? tried going through the full list, but theres a lot of noise :)
[01:48] <rww> Photocopy: Your IP address is a function of your router and/or modem. It has nothing to do with Ubuntu.
[01:48] <Fish-Face> The error I get is "[ogg @ 0x98812c0]Could not find codec parameters (Video: theora, 320x240)" and then later, "swScaler: Unknown format is not supported as input pixel format", which I can't find anything for on Google
[01:48] <xangua> paq7512: ubuntu one¿ dropbox¿
[01:48] <geeknik> paq7512: Ubuntu One is a good place to start.
[01:48] <rewt> "give a man a fish ..."
[01:48] <Fish-Face> Should ffmpeg be able to transcode the output of Cheese?
[01:48] <Photocopy> rww: no need to be patronizing. #ubuntu-offtopic is where I should ask, then?
[01:49] <ggreene> need help configuring iptables
[01:49] <AbstractBeliefs> good evening (and a happy new year) all. whats the best way of getting mac80211 (and later ath5k) onto jeos?
[01:49] <AnggaDj98> mdpatrick: try #ubuntu-bots, usually BestBot and ubottu is there to answer your questions and supports about applications
[01:49] <Photocopy> rww: additionally, it says in the topic for that channel that it is not a support channel. I've asked for help there but I'm expecting to be redirected back here.
[01:50] <swazzy> does any one know how to install themes
[01:50] <xangua> swazzy: drag them to the Appearence window
[01:50] <bweb> dnivra: got it, .profile is the key :)
[01:51] <coz_> swazzy,   yes  or  open system/preferences/appearance  and click the "Install"  button and locate the tar.gz file you download
[01:51] <dnivra> bweb, great!
[01:51] <bweb> dnivra: thx!
[01:51] <dnivra> bweb, no problem :)
[01:51] <Steve973> bweb for some reason i want to switch the w and the e in your name.
[01:52] <swazzy> ok thanks
[01:52] <bweb> Steve973: interesting, epxplain it, pls
[01:52] <porkchop_> @Steve973 haha I thought i was the only one
[01:52] <Steve973> bewb = boob = fun.
[01:52] <Rena-> Steve973, I had to look at it and realize what order they were actually in to figure out why you said that :-p
[01:52] <jkoch> Anyone know how to fix the video lag with intel intergrated graphics on 10.10?
[01:54] <porkchop_> jkoch not sure what lag youre talking about. I have integrated intel, but no lag that i notice
[01:55] <jkoch> porkchop_:  laptop or desktop
[01:55] <porkchop_> Jkock: lap
[01:56] <jkoch> porkchop_: hmm what model lappy
[01:56] <mdpatrick> AnggaDj98: Might have found what I was looking for! sudo aptitude install popularity-contest
[01:57] <porkchop_> Jkoch...toshiba satellite
[01:57] <AnggaDj98> nice
[01:57] <AnggaDj98> thanks anyway maybe i will  use it
[01:57] <jkoch> porkchop_: what driver are you running
[01:57] <AbstractBeliefs> porkchop_ haha, doing an ubuntu install on a satellite *right now*
[01:58] <dnivra> mdpatrick, AnggaDj98 i think that package submits reports to ubuntu. is that what you're looking for?
 Is there a way to sort aptitude/apt-get packages by *popularity* and view the,?
[01:58] <porkchop_> Jkoch...the standard open source driver prepackaged with ubuntu
[01:59] <dnivra> !info popularity-contest | AnggaDj98 mdpatrick
[01:59] <jkoch> porkchop_: thats strange... is your video the 82845G?
[01:59] <dnivra> !info popularity-contest | mdpatrick
[01:59] <dnivra> AnggaDj98, mdpatrick not quite the same is it?
[01:59] <paq7512> how can you play wmv instead your browser?
[02:00] <AnggaDj98> paq7512: use vlc media player, wmv encoding is installed by default
[02:00] <abarahc> oh god
[02:01] <porkchop_> jkoch...where do i find that info
[02:01] <AbstractBeliefs> good evening all. whats the best way of getting mac80211 (and later ath5k) onto jeos?
[02:02] <dnivra> AnggaDj98, mdpatrick i think it is still under work maybe. check this out https://wiki.ubuntu.com/SoftwareCenter/RatingsAndReviews.
[02:02] <abarahc> any brazilian here?
[02:02] <jkoch> porkchop_: sudo lspci
[02:02] <porkchop_> Jkoch...kernel driver in use agpgart-intel
[02:02] <jkoch> porkchop_: i'll have to try it
[02:02] <AnggaDj98> dnivra: thanks
[02:02] <kwtm> Hi! Need advice on how to fix wireless on my dad's Ubuntu laptop within the next hour. Right now, "ifconfig" doesn't list "wlan0". If I do "sudo ifconfig wlan0 up", it says SIOCSIFFLAGS: No such file or directory
[02:03] <dnivra> !brazil | abarahc
[02:03] <dnivra> AnggaDj98, no problem :).
[02:03] <kwtm> What should be my next step in locating the problem?  Am reading about 5 Ubuntu forums pages simultaneously. :P
[02:04] <xim_> i am trying to use my nvidia gts 450 to do dual monitors.  I am using nvidia-settings, and i can only get it to mirror the desktops instead of extending into the second space?
[02:05] <Linux_Galore> kwtm: do you actually have wifi turned on would be the first question, many laptops have an on/off button of keypad shortcut
[02:06] <administrator_> hehhe
[02:06] <administrator_> 啥子东西哦
[02:07] <kwtm> Linux_Galore, Good question.  Will check.  Forgot to check hardware...
[02:07]  * Linux_Galore spent 40 min diagnosing a wifi problem once only to find there was a switch to turn it on
[02:07] <xim_> Linux_Galore, was that on a laptop? i did that exact thing once.  an Hp
[02:07] <kwtm> Linux_Galore, but it works in Vista when dual-booted, so doubtful.  Currently am reading https://help.ubuntu.com/community/WifiDocs/WirelessTroubleShootingGuide/Devices to see if device is recognized (while trying to take care of 2yo toddler...)
[02:08] <r00t4rd3d> kwtm, we need to know the chipset of the wireless device. In a terminal type in lspci and look for some thing like Broadcom 43xx
[02:08] <drx> do Google phones run Linux
[02:08] <r00t4rd3d> it will be towards the end
[02:08] <drx> ?
[02:08] <Rena-> ehh... yes and no
[02:08] <Linux_Galore> kwtm: next step is  goto www.google.com/linux then search   linux ubuntu "wifi chipset"
[02:09] <r00t4rd3d> drx ye
[02:09] <Rena-> Android is based on Linux but it doesn't really resemble it at all.
[02:09] <Rena-> to be honest I don't know what they've done do it. it crashes randomly and has all sorts of other issues Linux normally does not.
[02:09] <Linux_Galore> kwtm: actually dont need the word linux in the search term
[02:09] <drx> what is the best case material to protect an Android phone:  plastic, silicon, rubber, carbon fiber or leather?
[02:10] <jkoch> porkchop_: thats what i'm using. i don't know why i'm having problems
[02:10] <r00t4rd3d> kwtm, follow what i told ya and i will help you without googling
[02:10] <dnivra> !ot | drx
[02:11] <r00t4rd3d> Linux_Galore, we are here to help not send people off to google with some random "wifi chipset" searches.
[02:11] <Linux_Galore> kwtm: sometimes  searching for your laptop model helps, I often find walk through howto's for set laptops with many hacks
[02:11] <dnivra> !google | Linux_Galore
[02:12] <Linux_Galore> dnivra: ubuntu documentation doesnt always define specific laptop models hacks
[02:13] <ggreene> help with iptables
[02:13] <r00t4rd3d> lspci in a terminal will tell me what he has faster then google
[02:13] <dnivra> Linux_Galore, true but neither does google search :). giving specific links and then asking them to search in google would definitely help since the other person may not know what to be looking for :).
[02:13] <r00t4rd3d> aka the chipset
[02:14] <Linux_Galore> dnivra: example the laptop I am on msi x320 little if any documentation on the official site, in fact I found a blog in google with a complete ubuntu install walk including driver build details
[02:14] <kwtm> Linux_Galore, thanks for advice. Currently it seems that the BCM4312 driver is not yet installed. When I try System > Administration > Hardware Drivers to install the Broadcom wireless STA driver, an error msg pops up: " SystemError: installArchives() failed"
[02:14] <coz_> I think its always a good idea to have the specs for you system  ..desktop or laptop  ...at hand when coming here as well..especially if new to the whole irc thingy
[02:14] <dnivra> !iptables | ggreene
[02:14] <r00t4rd3d> kwtm, follow this guide. https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx
[02:14] <r00t4rd3d> if you have the BCM43xx wifi chipset
[02:15] <kwtm> r00t4rd3d, Thank you, will try.
[02:15] <dnivra> Linux_Galore, true but you know what you're looking for, other person need not :). just my opinion.
[02:15] <cdavis> Can someone help me with what I think is a grub problem? I install xbcm live (10.04) fine but it will not boot from the disk. No error just cursor then black screen
[02:15] <cdavis> sometimes I get scroll lock and caps lock flashing
[02:15] <r00t4rd3d> kwtm , i have all the packages and instructions for that wireless card if you would like them.
[02:16] <gucko> hello people
[02:16] <AnggaDj98> gucko: hi?
[02:16] <jkoch> how can i get ubuntu to recognise an external hardrive?
[02:16] <gucko> I'm just trying new features :D
[02:16] <rodyeo> U mean the programme of a external hardrive?
[02:17] <rodyeo> like that back up programme?
[02:17] <jkoch> just an external hardrive to store some files on?
[02:17] <r00t4rd3d> kwtm, PM
[02:17] <dnivra> jkoch, plug it in; should be detected automatically.
[02:17] <rodyeo> It should be able to connect once u plug it in
[02:17] <porkchop_> plug it in and mount it?
[02:17] <jkoch> i plugged it in and i don't see it anything
[02:17] <rodyeo> hmm
[02:18] <rodyeo> If u haven't touch anything to stop ur usb ports or anything
[02:18] <cdavis> my drive used to be part of a software raid, could that be causing problms?
[02:18] <rodyeo> u should be able to open it
[02:18] <sn0w> Hiwh
[02:18] <Linux_Galore> dnivra: Ubuntu should collect model specific install walk throughs, makes life so much easier
[02:18] <sn0w> What's the best mac theme for ubuntu
[02:18] <jkoch> got it. i did stop my usb ports lol
[02:18] <dnivra> Linux_Galore, you could consider adding it to wiki :). i think you can.
[02:19] <IdleOne> !themes | sn0w
[02:19] <dropbear> what channell can I join to get some tech help?
[02:19] <rodyeo> Anyone here using xubuntu?
[02:20] <ggreene> i run a ubuntu router firewalled with iptables. I need it to allow a computer to vncviewer through the iptables to a computer on the other side
[02:20] <sn0w> IdleOne: I did
[02:20] <sn0w> They're all gay
[02:20] <FloodBot1> sn0w: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[02:20] <vpsadmin> hello... just wondering if someone might be able to please help. I've got ubuntu 8.04 server installed and when I do an do-release-upgrade and I get "Failed Upgrade tool signature Failed Upgrade Tool"
[02:20] <rodyeo> I don't use a firewall
[02:20] <rodyeo> i use avast anti virus
[02:20] <rodyeo> but i hardly do checks
[02:20] <IdleOne> sn0w: Please don't use the word gay as a pejorative and also. what you might not like someone else will. find one you like and use that
[02:21] <windowripper> use backtrack not ubuntu
[02:21] <IdleOne> !enter | rodyeo
[02:21] <sn0w> IdleOne: What is this
[02:21] <sn0w> Final Fantasy?
[02:21]  * dropbear needs to find some tech help... any help?
[02:21] <IdleOne> !ask | dropbear
[02:21] <rodyeo> You could try ubuntu forums
[02:21] <windowripper> backtrack is the best linux distro
[02:21] <kwtm> Problem seems to have been solved.  Will need to restart computer to know for sure.  Thanks to Linux_Galore and r00t4rd3d.
[02:21] <porkchop_> Sn0w: Mac4Lin
[02:22] <IdleOne> windowripper: #backtrack-linux
[02:22] <windowripper> yes
[02:22] <sn0w> porkchop_: I can never set it up to be good
[02:22] <Steve973> windowripper your mom is the best linux distro.
[02:22] <IdleOne> windowripper: go troll there, this is #ubuntu
[02:22] <sn0w> !enter Steve973
[02:22] <IdleOne> Steve973: Please be civil.
[02:22] <Steve973> what does !enter mean
[02:22] <sn0w> !enter | Steve973
[02:22] <windowripper> im gona breach your shit system steve
[02:23] <voss> My mom runs linux? That is so awesome!
[02:23] <rodyeo> How long have u guys been using linux?
[02:23] <Steve973> sn0w I am confused by that comment.  and I was just joking with him.  silliness begets silliness
[02:23] <vpsadmin> can anyone help me with my upgrade please?
[02:23] <r00t4rd3d> 15 years on and off
[02:23] <Steve973> since 1997, rodyeo
[02:24] <Steve973> maybe 1998
[02:24] <rodyeo> Wow, I've been using it for about a year
[02:24] <r00t4rd3d> it use to be alot harder to use
[02:24] <sn0w> I was born in 2006
[02:24] <voss> root what were you using 15 years ago :)
[02:24] <r00t4rd3d> just getting it installed 10 years ago was a chore
[02:24] <sn0w> Im turning 5 tomorrow
[02:24] <r00t4rd3d> voss, mandrake :/
[02:25] <rodyeo> snow: smart kid u are
[02:25] <sn0w> Yup
[02:25] <voss> root, I remember that in the magazines
[02:25] <dropbear> can anyone direct me to a channel where I can get some basic newbie help?
[02:25] <rodyeo> Snow: I'm 14
[02:25] <r00t4rd3d> now its mandriva or something
[02:25] <sn0w> You're too old
[02:25] <IdleOne> dropbear: #ubuntu-beginners
[02:25] <foolhardy> x won't start. How do I tell ubuntu to use "NVIDIA accelerated graphics driver (version 173)" driver via the cli?
[02:25] <voss> root, oddly enough I switched my laptop over to linux years before my desktop
[02:25] <dropbear> thanks
[02:25] <sn0w> Is no one 5 here?
[02:25] <rodyeo> Snow:hahas, well at least i ain't a windows user
[02:25] <ggreene> i run a ubuntu router firewalled with iptables. I need it to allow a computer to vncviewer through the iptables to a computer on the other side
[02:26] <aeon-ltd> sn0w: american, 5 years old - irc user seriously?
[02:26] <sn0w> Yup
[02:26] <aeon-ltd> u trollin'?
[02:26] <sn0w> No
[02:26] <rodyeo> aeon: i support snow, at least there are younger kids then me into linux
[02:26] <sn0w> What's trolling
[02:26] <aeon-ltd> sn0w: influential parents or something?
[02:27] <sn0w> What's trolling
[02:27] <voss> snow your dad lets you go on irc chat at age 5?
[02:27] <sn0w> My dad?
[02:27] <r00t4rd3d> sn0w being a jerk looking for trouble
[02:27] <rtdos> where are the #ubuntu channels moving to?
[02:27] <aeon-ltd> sn0w: essentially spamming, and provoking response from others
[02:27] <IdleOne> sn0w: Please keep the discussion Ubuntu support related.
[02:27] <IdleOne> rtdos: they aren't moving
[02:27] <sn0w> stop asking me so many questions
[02:27] <aeon-ltd> sorry for leading it ot
[02:28] <rtdos> i just say a post in #freenode saying they were. i'm confused. was it a joke?
[02:28] <rodyeo> Yup sorry here
[02:28] <IdleOne> rtdos: just spam, ignore it.
[02:28] <sn0w> How do i run something as root
[02:29] <rtdos> ohzie, ok, idleone; it said you guys were moving to oftc or something like that.
[02:29] <aeon-ltd> sn0w: sudo command
[02:29] <rodyeo> I don't think u can in ubuntu
[02:29] <sn0w> I try to install macbuntu, it asks for root
[02:29] <rodyeo> Only when u run applications
[02:29] <sn0w> o
[02:29] <rodyeo> u have to give permission
[02:29] <rodyeo> by typing in your password
[02:29] <sn0w> idk the password
[02:29] <blud> then you cant
[02:29] <rodyeo> Its ur log in password
[02:29] <blud> thats the whole point of root...
[02:29] <sn0w> oh
[02:30] <blud> hey guys, how do I share a folder on my network?
[02:30] <blud> i'm using mythbuntu
[02:30] <r00t4rd3d> blud , samba
[02:30] <sn0w> IdleOne: Do you get paid
[02:30] <r00t4rd3d> (LOL)
[02:30] <blud> I just installed samba
[02:30] <blud> then what do i do?
[02:30] <IdleOne> sn0w: only with thanks from the community
[02:31] <sn0w> IdleOne: You wok too had
[02:31] <jpds> sn0w: I imagine he does one way or another - that's how he survives in life, anyway, please stay on topic.
[02:31] <IdleOne> I do
[02:31] <voss> and $1.79 will buy idle a coffee at dunkin
[02:31] <r00t4rd3d> blud now you have to configure it.
[02:31] <sn0w> voss i want to give u dollar
[02:31] <blud> where do i do that? (sorry for how much of a noob i am)
[02:31] <dnivra> blud, hope this helps https://help.ubuntu.com/community/Samba.
[02:31] <r00t4rd3d> blud http://ubuntuforums.org/showthread.php?t=202605
[02:32] <IdleOne> sn0w: I am going to ask you nicely to please stick to Ubuntu support discussion, you can /join #ubuntu-offtopic if you feel like chatting
[02:32] <voss> snow, youd double my pay! ;)
[02:32] <AnggaDj98> sn0w: please dont abuse members
[02:32] <sn0w> War
[02:32] <sn0w> What
[02:32] <AnggaDj98> sn0w: ubuntu is free, as well as the support
[02:32] <sn0w> i want to give a dollar
[02:32] <AnggaDj98> sn0w: if you dont like free services by Windows or Mac
[02:32] <rodyeo> Thats why i love ubuntu.
[02:32] <AnggaDj98> sn0w: Donate?
[02:33] <sn0w> i hate windows
[02:33] <rodyeo> Same here
[02:33] <sn0w> ubuntu owns
[02:33] <AnggaDj98> same here and there, everywhere
[02:33] <AnggaDj98> anyway, stay on topic
[02:33] <rodyeo> Ok
[02:33] <rodyeo> No one seems to be asking any Questions
[02:33] <blud> i was hoping not to have to read a huge manual :|
[02:33] <ggreene> does any one know iptables?
[02:34] <rodyeo> Nope, what is it?
[02:34] <ggreene> a ubuntu firewall
[02:34] <dnivra> ggreene, you've been here long enough i think. doubt anybody knows how to help you :)
[02:34] <rodyeo> O i see interesting, i'll search it up for now i have to go out
[02:34] <jpds> ggreene: Yes, but a more specific question would be hopeful.
[02:34] <IdleOne> ggreene: ##networking might be able to help you also
[02:34] <IdleOne> or jpds :)
[02:35] <jospams> you guys know how to auto mount my media drive at login?
[02:35] <jkoch> how can i get ubuntu to stop locking my screen after a certain amount of time
[02:35] <ggreene> jpds, i need to have a computer be a to use vnc viewer to another one through iptables as my firewall
[02:36] <porkchop_> system->preferences->screensaver
[02:36] <IdleOne> jkoch: check the screensaver settings
[02:36] <jospams> ktorrent can't automount for somereason
[02:36] <mdpatrick> Whats it mean if a computer, previously running just fine, starts restarting repeatedly right after/during memory check?
[02:36] <dnivra> !fstab | jospams
[02:36] <mdpatrick> I.e. infinite reboot loop
[02:36] <blud> hmm, ok that website says to right click on the folder and choose "Sharing Options", but I don't have that when i right click
[02:36] <r00t4rd3d> ggreene, apt-get install gufw :D
[02:36] <r00t4rd3d> minus :D
[02:36] <blud> i'm using Thunar in xfce (mythbuntu)
[02:37] <ggreene> root4rd3d, what is gufw?
[02:37] <r00t4rd3d> firewall/iptables front end
[02:38] <r00t4rd3d> makes it easy to configure firewall basically
[02:38] <jospams> i don't want to edit system files manually, any program that can do this for me?
[02:39] <r00t4rd3d> ggreene, https://help.ubuntu.com/community/Gufw
[02:39] <jpds> ggreene: Does that have to deal with NAT? You might find someone in #ubuntu-server.
[02:39] <jospams> media/media
[02:41] <ggreene> thanks
[02:44] <al_nz1> to run I *.bin file I am just running ./filename.bin - this correct?
[02:44] <jospams> any easy way to do fstab automount?
[02:45] <econ> I have a question about saving an edit I made to the /etc/apt/sources.list file. When I try to save I get a message saying [ Error writing /etc/apt/sources.list: Permission denied ]. It doesn't ask me for a password anywhere though. Does anyone know how I can get my edit to save?
[02:46] <r00t4rd3d> econ use the sudo command
[02:46] <r00t4rd3d> sudo gedit /etc/apt/etv
[02:47] <econ> I'm writing it in nano, do things like sudo still apply to that?
[02:47] <r00t4rd3d> yeah
[02:47] <econ> ok thanks
[02:47] <r00t4rd3d> sudo nano /etc/apt/etc
[02:47] <r00t4rd3d> but you know there is an easier way to add repo's ?
[02:48] <CarlFK> r00t4rd3d: sudo apt-add-repository 'deb http://packages.medibuntu.org/ '$(lsb_release -cs)' free non-free'
[02:48] <blud> r00t4rd3d that thread seems to be talking about a lot more than I want to do... do I really need to set up netbios and WINS just to share a folder?
[02:48] <CarlFK> er, I guess econ should see that: sudo apt-add-repository 'deb http://packages.medibuntu.org/ '$(lsb_release -cs)' free non-free'
[02:49] <stealthc> you could use ftp.... you don't need netbios and wins
[02:49] <blud> well if i want to set it up so that a windows computer can see the share I do need to do this netbios wins stuff?
[02:49] <stealthc> setup an ftp server, problem solved, it's less hassle than setting up a share and mounting it.
[02:49] <stealthc> no windows computers can see ftp just fine right from the browser window
[02:50] <blud> stealthc: but ftp is not a good solution because i'm dealing with large files and it would use my internet connection right?
[02:50] <blud> or would i just connect to a local address...
[02:50] <stealthc> not necessarily, you can setup ftp on your local network and it wouldn't require using an internet connection
[02:51] <stealthc> your router likely has dns and other services on it that allow you to setup local stuff easy enough....
[02:52] <CT1> Happy new year to all!  Is there some simple to understand guide for the command line alternative to alt+tab? ("fg" came up in search) I'm playing with a server which I have physical access to but prefer to ssh into for practice, rather than install gnome.  Make sense?
[02:52] <stealthc> the typical setup as a router using NAT and you have local address space, so you can connect to ftp via direct connection to the server's ip address, no need to go off your network
[02:53] <stealthc> just define a static ip for the server using it's mac address, problem solved works fine with ftp.  it's also easy to integrate into software if need be, ftp is pretty easy to do using a variety of library modules out tere
[02:53] <stealthc> there meant
[02:53] <r00t4rd3d> i never use samba or ftp. I use ssh and winscp :D
[02:54] <trism> !screen | CT1
[02:54] <blud> i'd rather use samba, because then i dont have to install FTP clients on my various windows machines
[02:55] <stealthc> lol windows comes with an ftp client, it's called explorer
[02:55] <blud> mainly just because i dont want to use ftp for the sole reason that i 'couldnt figure out" how to do shared folders :p
[02:55] <blud> yeah but its a crappy ftp client
[02:55] <blud> at this point is a matter of principle, i need to figure out how to set up a network share
[02:56] <blud> r00t4rd3d is is a good idea to try to use this http://ubuntuforums.org/showthread.php?t=202605  post from like 2006
[02:56] <CT1> trism: Thankyou! Looks alot easier than 'jobs' 'fg' and such-like.  All the best for the new year!
[02:56] <epaphus> Hello. how can i find out the version of ubuntu i have?
[02:57] <r00t4rd3d> uname -a in a terminal
[02:57] <dnivra> epaphus, lsb_release -r in the terminal.
[02:57] <dnivra> epaphus, or system -> about ubuntu.
[02:58] <r00t4rd3d> blud,  if you look at the last page from November 2010 >Brilliant walkthrough - thanks!
[03:02] <dnivra> epaphus, okay maybe stick to "lsb_release -rd". I think System -> About Ubuntu says 11.04 in 10.10. It does in my machine anyway.
[03:03] <fishscene> How do I set my Empathy settings so that offline people DO NOT show up on my list of contacts?
[03:04] <n1ea> Hello is there anyone here who would allow me to attempt to chat with them so I could see if I have DCC Chat working in xchat?
[03:04] <Dola> hahah
[03:04] <rww> n1ea: sure
[03:05] <xangua> fishscene: buddies>show¿¿ or at least that is on pidgin
[03:05] <fishscene> Yea, Pidgin can hide it, but I can't seem to find the option on Empathy
[03:05] <rww> n1ea: it says it can't connect
[03:05] <fishscene> I really hate scrolling through 200 contacts to find the one buried 2/3rds of the way down the list
[03:06] <rww> n1ea: disclaimer: I haven't done DCC on this computer before; I believe it's set up properly, but I might be wrong.
[03:06] <calliscope> hi
[03:06] <rww> n1ea: failed again
[03:07] <n1ea> Yes I see.  Try chat to me please rww
[03:07] <rww> n1ea: sent
[03:08] <skypent> Having trouble playing a netflix DVD.  Does anyone know of a good remedy to the situation (I try opening it with the media player).
[03:08] <fishscene> Skypent: Have you tried using VLC?
[03:09] <Mr> I need help with  an ubuntu theme that does not work
[03:09] <Mr> somebody please
[03:09] <skypent> Fishscene:  Nope, is it included in a package, or should I dl it.
[03:09] <fishscene> Before we go download VLC from the Software store, have you tried another DVD?
[03:09] <IdleOne> skypent: always search in Software Center first or Synaptic Package Manager
[03:10] <Mr> Im using the JULinux Ubuntu distro and I want the win7 theme and when I run the scripts the START button ends up not working...
[03:10] <fishscene> Netflix DVD's don't do anything special, but they can get scratched and such.
[03:10] <skypent> This is the third DVD I've tried, (2nd netflix).  I just had forgotten about this issue.
[03:11] <KM0201> skypent: have you installed libdvdcss2?
[03:11] <n1ea> @rww - I tried connect chat with you but it doesn't accept.  Strange when I TAB for your name it doesn't go to it though.
[03:12] <fishscene> Yea, you might not have the DVD codec's installed. These have to be installed separately because of pesky licensing issues. Many of these codecs can be found by looking for "gstreamer" on the ubuntu software center.
[03:12] <r00t4rd3d> skypent, you need the restricted format stuff
[03:12] <r00t4rd3d> https://help.ubuntu.com/community/RestrictedFormats/PlayingDVDs
[03:13] <skypent> Should I cancel the vlc dl from SPM?
[03:13] <fishscene> yea, go ahead and cancel and check out the link that r00t gave.
[03:13] <horseatingweeds> Why can I connect to a computer on my local network using its IP address (192.168.0.197) but not its host/machine name?
[03:13] <r00t4rd3d> if you dont want vlc and wish to us something else
[03:13] <rww> n1ea: I'm getting requests and accepting them, but it's failing.
[03:13] <horseatingweeds> Using ssh
[03:14] <fishscene> horseatingweeds: Using a computer name needs netbios enabled (which includes a proper directory server) or DNS entries on your local DNS server.
[03:14] <KM0201> skypent: no realy, cuz vlc is still the best media player.. but you still need to install some restricted stuff
[03:14] <rww> n1ea: doesn't work if I do passive dcc either, it seems. you might need to do so on your end.
[03:14] <dnivra> horseatingweeds, i guess there is no way to convert the host name to the IP address aka DNS isn't there.
[03:14] <n1ea> rww:  I understand.  I will apt-get purge xchat and ircw and see what happens.  I found a workaround for cwirc - start xchat with command aoss xchat.  Bye for now.
[03:15] <horseatingweeds> fishscene, dnivra, I'd have to add a line in the host file?
[03:15] <Dola> i need help with winamp and win98
[03:15] <skypent> Can the vlc automatically use the libdvd codecs?
[03:16] <fishscene> That would work... But if you don't have a static IP address or static DHCP entry, it might change and you'd have to manually update the host file again.
[03:16] <Dola> i've downloaded midi's and i want to convert them to the real songs
[03:16] <Dola> standing by for guidance.
[03:16] <fishscene> Dola: If it's not related to Ubuntu, there's not much we can do to help you here.
[03:16] <Dola> ok..sorry i'm drunk
[03:16] <r00t4rd3d> lol
[03:16] <KM0201> skypent: no, you need to install it.
[03:16] <KM0201> !dvd | skypent
[03:16] <gatos_> and a Wni user
[03:17] <r00t4rd3d> Dola,  im sure there is a app for ubuntu that would do that
[03:17] <xangua> !medibuntu
[03:17] <xangua> skypent: you can get libdvdcs2 from medibuntu repositories
[03:17] <fishscene> VLC might come with libdvdcss. I'm not sure though.
[03:17] <skypent> Yes, I dled the libdvdcs2.  Just wondering if my vlc can use it after or if I have to select the path to it.
[03:17] <KM0201> fishscene: not to my knowledge... regardless, it only takes 5sec to install... no real reason not to install it
[03:17] <KM0201> skypent: no, vlc should see it no problem.... as long as you installed it properly
[03:17] <fishscene> KM0201: User preference :) I love VLC personally. :d
[03:17] <blud> r00t4rd3d: ok the first thing that samba guide says is that your computer needs a static IP. So I tried to follow these instructions on setting a static IP: http://www.jonathanmoeller.com/screed/?p=2305
[03:18] <blud> but i'm using wlan0 not eth0, because I'm using a wireless connection..
[03:18] <KM0201> fishscene: same here... just saying, he'll still need it even w/ VLC.. so he's gotta install it anyway
[03:18] <blud> now i can't ping the gateway and i have no internet :|
[03:18] <skypent> alright.
[03:18]  * fishscene learns something new
[03:19]  * Dola learns something new.
[03:19] <jimmyzasdf>  can i turn off the feature which asks for my password whenever i change a system setting?
[03:19]  * KM0201 learned something new earlier... a wireless device as eth1?  whoddathunkit
[03:19] <skypent> Thank you much people.  I get to watch Paprika now :D!
[03:19] <Dola> i'm starting my own channel.  #vistawallpapers!
[03:19] <KM0201> lol
[03:19] <dnivra> KM0201, i have eth2 but no eth0 or eth1 :)
[03:19] <Dola> alright gents...have a happy new years
[03:20] <r00t4rd3d> blud, i wouldnt worry about setting the static ip
[03:20] <xangua> skypent: the machine to watch dreams¿ great movie :D
[03:20] <fishscene> g2g. Hopefully empathy will include a way to NOT SHOW contacts who are offline. =\
[03:20] <fishscene> exit
[03:20] <KM0201> dnivra: that's not "entirely unusual" i guess... but i've never saw  a wireless device that wasn't wlan0 or wlan1
[03:20]  * KM0201 hates empathy...
[03:20] <dnivra> KM0201, yeah that is true. seen it three or four times here.
[03:20]  * dnivra has no empathy :)
[03:20] <skypent> xangua: Sweet.  I'm going into it blind, so it might trip me out.
[03:20] <KM0201> dnivra: never saw it till i was helping someone earlier
[03:21] <dnivra> KM0201, same here :)
[03:21] <KM0201> dnivra: lol, me either.. it was the first program i dumped after installing
[03:21] <r00t4rd3d> blud setting static ip's in your router is alot easier
[03:21] <dnivra> KM0201, it could have more than one meaning. yeah same here 'apt-get purge empathy&&apt-get install pidgin' :)
[03:21] <KM0201> r00t4rd3d: i'v enever understood why people think the OS should assign a static IP...
[03:22] <r00t4rd3d> so it doesnt change
[03:22] <KM0201> r00t4rd3d: i understand that, but set it up through your router..
[03:22] <r00t4rd3d> yeah thats how i do it
[03:22] <KM0201> r00t4rd3d: the other way, seems like saying "I need to stop and get gas, so i'll wait till I run out then walk to the gas station"
[03:23] <blud> r00t4rd3d, i do have to worry about having a static ip, if it's not static then each time i want to use the shared folder i have to find out what the new IP of the computer is
[03:23] <KM0201> blud: assign it through your router
[03:23] <r00t4rd3d> true but get it working then we can work on the static ip
[03:23] <blud> first i have to go undo what i just did
[03:24] <r00t4rd3d> blud, do you have a router ? Hopefully a Linksys....
[03:25] <r00t4rd3d> more hope for a WRT version with ddwrt on it :D
[03:25]  * KM0201 has a Netgear router.. assigning IP's takes 5sec.. :)
[03:26] <r00t4rd3d> good cause i only know linksys if he has something different
[03:26] <blud> ok i fixed it so its back to normal,
[03:26] <blud> yeah i have a linksys router
[03:27] <blud> its connected to another linksys router that i use as a WAP
[03:27] <blud> but the main router is the gateway
[03:28] <ambrosius> happy new year everyone
[03:28] <Maucat> hello everybody
[03:29] <ambrosius> hi
[03:29] <KM0201> hi Maucat
[03:29] <lano> HI all can someone please help me, i cant seem to fin rpc.statd in /var/lib/nfs and due to this i belive i cant seem to map any nfs share
[03:30] <Maucat> KM0201, I come from china
[03:30] <blud> r00t4rd3d: so where do i do this, in the WAP router or the gateway router?
[03:30] <blud> :p
[03:31] <KM0201> blud: i'm not sure exactly where in a linksys router.. i'm sure it's quite easy..
[03:31] <r00t4rd3d> in the services tab on the main router
[03:31] <r00t4rd3d> what do you have like a wireless bridge setup ?
[03:32] <blud> yeah basically i guess. The main router does dhcp and the wap doesnt
[03:32] <lano> HI all can someone please help me, i cant seem to fin rpc.statd in /var/lib/nfs and due to this i belive i cant seem to map any nfs share
[03:33] <r00t4rd3d> In the main router settings under the serives tab , you enter the mac address of the device you want static ip. Enter the mac , the ip you want like 192.168.1.175 and enable. Reboot the computer.
[03:34] <IdleOne> !find rpc.statd
[03:34] <IdleOne> in nfs-common
[03:34] <KM0201> hmm
[03:34] <lano> cd /
[03:35] <IdleOne> Error: Permission Denied.
[03:35] <IdleOne> :)
[03:35] <horseatingweeds> If ssh is working, should scp work as well or does the server need something installed?
[03:35] <rww> horseatingweeds: by default, scp should work if ssh does
[03:36] <pksadiq> IdleOne: I thought you don't know to smile ;)
[03:36] <JRWR> Ive got a server that i need to do a full backup on over a limited internet connection, the server as a ton of identical files, what would be the best thing to make the backup with, im thinking Rsync
[03:36] <lano> ubottu,  so how do i get it to start i am constantly getting this messages mount.nfs: rpc.statd is not running but is required for remote locking.
[03:36] <lano> mount.nfs: Either use '-o nolock' to keep locks local, or start statd.
[03:36] <lano> mount.nfs: an incorrect mount option was specified
[03:36] <blud> r00t4rd3d I know what you mean but i cant find it in this router.. looking...
[03:36] <blud> its the RT31P2 btw
[03:37] <lano> IdleOne,  can u help me out
[03:37] <IdleOne> lano: sorry I don't know more but try installing nfs-common see if that helps
[03:37] <anon__> Is there any way to disable the root shell prompt in recovery mode?
[03:38] <anon__> Or at least make it require a password?
[03:38] <lano> i have installed that
[03:38] <lano> and it seems like its installed but it keeps complaining about statd
[03:38] <KM0201> anon__: i've commented it out of grub before, but then every time i'd boot, it would do a system check for some reason..
[03:38] <lano> and it does not seem to be running/ i cant find it
[03:39] <pksadiq> lano: in terminal try find / | grep rpc.statd
[03:40] <r00t4rd3d> blud , ive never used that model before but it should be pretty easy. Just look for a Services tab or Static Leases.
[03:40] <lano> pksadiq, i found it its located in sbin
[03:40] <blud> Static Routing?
[03:40] <pksadiq> lano: in terminal type rpc.statd
[03:41] <pksadiq> lano: and proceed to you older steps
[03:41] <horseatingweeds> rrw, Thanks. I was doing it wrong. ;-)
[03:41] <SC-M> how to change dns from CLI?
[03:41] <rww> horseatingweeds: no problem
[03:41] <lano> pksadiq,  eveytime i try mounting a nfs  mount point to my qnap server i get this message
[03:42] <lano> mount.nfs: access denied by server while mounting 192.X.X.X:/Work
[03:42] <pksadiq> lano: still the same error?
[03:42] <lano> yes
[03:42] <SC-M> how to change DNS from CLI
[03:42] <lano> i even tried
[03:42] <lano> rpc.statd -Fd and i can see its waiting for connection
[03:42] <cody_> Hey, how do I run .run files?
[03:42] <bluezonemobile> Cody
[03:42] <cody_> yes?
[03:43] <rww> SC-M: if you're not using network-manager, edit /etc/resolv.conf.
[03:43] <bluezonemobile> Sh name.run
[03:43] <cody_> kk
[03:43] <cody_> got it
[03:43] <cody_> in terminal, right?
[03:43] <bluezonemobile> If that doesn't work try ./name.run, yes
[03:43] <brent> hey guys, i just installed ubuntu 10.10 64 bit, instaled my nvidia card. how do i get audio to work over hdmi?
[03:43] <KM0201> how would you do that anywhere but terminal?
[03:43] <bluezonemobile> Make sure your in the right directory
[03:43] <pksadiq> lano: try rpc.statd -n ipaddress
[03:44] <lano> ip address to my qnap san storage
[03:44] <n1ea> rww Do you know what I have to install to /msg or /chat with irssi?
[03:44] <pksadiq> lano: something like 198.....
[03:44] <bluezonemobile> Km0201 yeah, I hate thaat question
[03:44] <KM0201> n1ea: i don't think you have to install anything.. but could be wrong
[03:44] <pksadiq> lano: sorry 192....
[03:44] <lano> pksadiq,  nothing happens
[03:45] <n1ea> rww do you see my msg ?
[03:45] <blud> wow man, the web server on my router appears to have crashed lol
[03:45] <cody_> is there a program I'm supposed to have installed for .run files? it keeps opening in Gedit.
[03:45] <KM0201> bluezonemobile: i usually tell them to do it in gedit
[03:45] <rww> n1ea: I PMed you
[03:45] <cody_> and it's an installer.
[03:45] <bluezonemobile> cody no use ./ or sh
[03:45] <cody_> .....
[03:45] <cody_> kk
[03:45] <KM0201> cody_: ..lol
[03:46] <bluezonemobile> In the right direectory
[03:46] <apfekatze> Happy new year
[03:46] <bluezonemobile> U2
[03:46] <n1ea> rww: Nothing seen - maybe I have to install screen or something
[03:46] <pksadiq> lano: might be you need to set the port too rpc.statd -n ippaddress -p port      I don't know which port does it have to listen, sorry
[03:46] <blud> idk r00t4rd3d, neither of my linksys routers have a services tab or anything abotu static leases :| (my other one is a 400wrt or something
[03:46] <Zvrk> nlea, you need to connect to server first like irc.freenode.net
[03:46] <bluezonemobile> Sorry I can't type very fast I'm on my phone
[03:46] <KM0201> Zvrk: well, he's here.. so one can safely assume that he's likely connected to a server..
[03:47] <pksadiq> bluezonemobile: which client?
[03:47] <rww> n1ea: have you used irssi much? there should be a new activity window opened for DCC with =rww in it. Ctrl-n will switch to the next window; check and make sure it's not hidding somewhere.
[03:47] <brent> any nvidia experts???
[03:47] <cody_> nope, the two commands open it in Gedit, you should know that this is a Ubuntu derivitive called Ultimate Edition.
[03:47] <cody_> as in I should have told you.
[03:47] <lano> ugh thanks hitting a wall here
[03:47] <KM0201> cody_: then you probably need to seek help from the ultimate edition channel...
[03:47] <cody_> kk
[03:47] <cody_> not sure what channel that is, though.
[03:48] <KM0201> !ultimate | cody_
[03:48] <pksadiq> !nvidia | brent
[03:48] <KM0201> cody_: hmm. looks like you might be SOL, ultimate doesn't have an IRC channel.. might have to see if they hae a forum
[03:48] <cody_> hmmm, makes sense, then
[03:48] <cody_> well, guess i'll resort to the forums.
[03:49] <KM0201> do they have forums?
[03:49] <KM0201> whats the appeal of ultimate edition anyway?
[03:49] <cody_> at least the didn't leave us out of options.
[03:49] <brent> i have my card installed, just no audio
[03:49] <cody_> yes, they have forums
[03:49] <lano> pksadiq,  i am getting this errors in messages file nfsd: last server has exited, flushing export cache , svc: failed to register lockdv1 RPC service (errno 97)
[03:49] <bluezonemobile> Your still having problems with .run?
[03:49] <cody_> the appeal is it serves my needs better.
[03:49] <cody_> i'll go and ask there.
[03:49] <KM0201> cody_: obviously, you can't even install an sh file
[03:49] <cody_> wow
[03:50] <r00t4rd3d> blud im not sure cause I have never used that model before.
[03:50] <wyclif> cody_: there is also Lubuntu
[03:50] <zevlag> Personal Request: I'm in a contest for my house remodel and need more votes, all you have to do is click +Vote, 1 vote per IP, your help is greatly appreciated: http://www.rtacabinetstore.com/contest/2010/12/01/new-house-new-kitchen-in-progress/
[03:50] <bluezonemobile> Well either I failed or he did I don't know anymore,
[03:50] <KM0201> wyclif: somethng tells me if he's using ultimate, he doesn't want to use lubuntu
[03:51] <wyclif> KM0201: Haha! True. I only saw the ubottu info
[03:51] <bluezonemobile> Why doesn't everyone just simply use desktop or server or netbook lol
[03:51] <KM0201> bluezonemobile: cuz that would be way to friggin simple
[03:52] <bluezonemobile> Hah
[03:52] <rww> We need 10,000 derivatives to make life as confusing as possible.
[03:52] <pksadiq> lano: I just said in general, don't know much deeper, might be nfsstat help you, sorry
[03:52] <wyclif> bluezonemobile: well I find a lot of users on Lucid because it's desktop and server edition
[03:52] <KM0201> bluezonemobile: there's always someone out there, who's figured they can make ubuntu better, when in truth.. all they usually do is add a feww splashy wallpapers an dinstall a few extra packages
[03:53] <pksadiq> rww: add some more zeros, it values zero
[03:53] <KM0201> Guest7328: running IRC as root probably isn't the smartest thing in the world..
[03:53] <bluezonemobile> I tried learning everything about ubuntu and c in a week, I got far but I think it would require a lifetime
[03:53] <wyclif> KM0201: Not trying to advocate here, but at least Lubuntu, by means of LXDE, tries to make it small and fast, cutting down the footprint. Better for old hardware.
[03:53] <pksadiq> bluezonemobile: what is the command puts("");  for?
[03:54] <wyclif> KM0201: but I know what you mean.
[03:54] <bluezonemobile> Pksadiq its to print a character
[03:54] <bluezonemobile> Entirely useless
[03:54] <KM0201> bluezonemobile: yeah.. i laugh at the people who install 7am, 10am, they want to learn how to write software from soruce and program, by 12 theyv'e encountered some insurmountable problem, and by 3:00, they've reinstalled windows
[03:54] <bluezonemobile> Use printf
[03:54] <KM0201> wyclif: oh i totally agree.. if you actually  make an improvement(like lubuntu did)... i have no issue w/ that
[03:54] <pksadiq> bluezonemobile: not only character, but strings too
[03:55] <bluezonemobile> Yeah, but just use printf lol
[03:55] <KM0201> wyclif: but when soeone takes ubuntu, keeps gnome on it, removes a few packages, adds a few packages, and tossed a few fancy wallpapers on it, then spins it as "ultimate edition"... it makes you wonder
[03:55] <pksadiq> bluezonemobile: how did you learn c? I would to like to learn, but didn't find good easier resources
[03:56] <PhonicUK[Sleep]> hey all, I can't seem to use any power govenors except Performance and Powersave
[03:56] <bluezonemobile> Pksadiq I used "c" for dummies 2004 but I only learnt the basics with that took me about 3 days
[03:56] <wyclif> KM0201: I remember the early days of desktop Linux where you'd get a CD from somewhere (magazine?) and be disappointed to find it was just one of the major distros with a layer of crap UI and different wallpaper and eye candy goo
[03:56] <PhonicUK[Sleep]> anyone know which package provides the power govenors so I can reinstall them?
[03:56] <lano> fixed it
[03:56] <KM0201> wyclif: yup
[03:57] <KM0201> wyclif: and even better, all that eyecandy would be on a distro that was over a year old
[03:57] <pksadiq> bluezonemobile: but such books teaches as bad habits of programming, I need gcc based tutorials in Gnu Free documentation Licence
[03:58] <blud> well im going to ask linksys chat support...
[03:58] <blud> but they dont support the RT31P anymore so i doubt they will even tell me
[03:58] <pksadiq> lano: how?
[03:58] <bluezonemobile> Pksadiq eh its not too bad and it shows u how to use gcc
[03:58] <lano> can someone tell me how to mount a drive to be on my desktop, if i create a folder calle work on my dekstop and i mount the drive another drive appears on to my desktop
[03:58] <cygnus_> Hi, how can I allow an exceptio nto my ubuntu firewall so my lan machine can ssh in?
[03:58] <bluezonemobile> Dobnt really need a tut for gcc
[03:58] <wyclif> KM0201: To me it's all down to Debian/Ubuntu and RH/CentOS. I just don't see much point in perpetuating a ton of other projects at this point.
[03:58] <bluezonemobile> Just man gcc
[03:59] <lano> pksadiq, it was my stupid mistake
[03:59] <KM0201> wyclif: totally agree... although.. Fedora is my favorite RH distro
[03:59] <KM0201> but it's basically redhat as well.
[03:59] <pksadiq> lano: try sudo mount /dev/<drive> ~/Desktop/<folder to be mounted>
[03:59] <lano> i created a new nfs mount point but i didnt give it right permissions on my nas
[03:59] <pksadiq> lano: what error?
[03:59] <pksadiq> lano: I mean mistake
[03:59] <KM0201> wyclif: i think thats part of linux's problem, the OS itself is skitzophrenic and can't decide what packaging system it wants to use.
[04:00] <lano> pksadiq,  i have 8 bay qnap drive when u create nfs folders u actually need to specify the folder permisions and u if u would like to give nfs access to that folder
[04:00] <wyclif> KM0201: plus you have to wonder how much that duplication of effort is hurting Linux adoption. Having one or two really solid options (Ubuntu w/ .deb, RH w/ .rpm) would be best
[04:01] <pksadiq> lano: do you mean u to be you?
[04:01] <wyclif> KM0201: sorry, meant Fedora
[04:01] <KM0201> wyclif: i figured you did.
[04:02] <lano> pksadiq,  when you say /dev/<drive> ? is that ip address coz i am connection to my nas via IP
[04:02] <lano> pksadiq,  yes
[04:02] <pksadiq> !u
[04:02] <bluezonemobile> Ew I hate fedora lol
[04:02] <Guest39298> For some reason scrolling my mouse wheel doesn't do anything, but it does work for middle clicks.
[04:02] <KM0201> wyclif: but if you only have 2 distros(ie, ubuntu and fedora).. then you run into... Ubuntu.. because it is so newb friendly, is very bloated.. it's one reason i prefer debian
[04:03] <pssalman> hi all
[04:03] <pssalman> i have a Conexant AccessRunner ADSL WAN USB Adapter and i want to switch from windows to ubuntu! i have installed along side windows and i don't know how can i get my ADSL adapter to work under ubuntu? any help please?
[04:03] <tamaros> KM0201: you can have multiple distros that use a unified package management system
[04:03] <wyclif> KM0201: I prefer Debian too, but wasn't sure if I was allowed to say that here
[04:04] <KM0201> tamaros: i know that..  wyclif and i were having a different discussion.
[04:04] <R0b0t1> Hello, I have a Logitech 3d extreme joystick. I am using the joystick utilities in the Ubuntu repository... jscal, however, does nothing... It runs, but it doesn't actually _do_ anything.
[04:04] <tamaros> KM0201: Sorry, I'm just butting in because I was bored
[04:04] <rww> I prefer Debian too, but I also prefer that we keep distro preferences to #ubuntu-offtopic :)
[04:04] <KM0201> wyclif: i am grateful to ubuntu though, it got me off the Windows tit, but once i had the basics down, i switched.. but i still hang out here, cuz i know most newbs are gonna try ubuntu first.. and frankly, most the guys in #debian are jackasses
[04:05] <wyclif> rww: Duly noted.
[04:05] <pksadiq> lano: I think then you need to use scp to copy files, I don't know much , check man scp
[04:05] <KM0201> :)
[04:05] <bluezonemobile> Haha the tit
[04:05] <tomd> Hi, im tying to use fuse and have installed flickrfs and sshfs. when i grep lsmod for fuse, nothing is shown. I also have tried to manually load with sudo modprobe fuse. Using 10.10 with 2.6.32-27-generic 2.6.32-27-generic. Any brilliant insights?
[04:05] <KM0201> bluezonemobile: :)
[04:06] <pssalman> i have a Conexant AccessRunner ADSL WAN USB Adapter and i want to switch from windows to ubuntu! i have installed along side windows and i don't know how can i get my ADSL adapter to work under ubuntu? any help please?
[04:06] <KM0201> man it is a slow night, folks must be out drinking
[04:06] <null1> So...I think I may have bricked my PC. I powered down during an ubuntu install on a fully encrypted HD
[04:06] <SPooN> !mint
[04:07] <KM0201> null1: yeah.. i'd say thats probably gonna fit the definition of "bricked"
[04:07] <vu1kan> I wrote a bash script to check a specific directory for files and display a zenity notification if it finds any.  The directory is where I have automatically downloaded torrents stored, I'd like it to put an icon in the tray if there are files there so I know to start my torrent client.  The script works when I test it, but does not work if I let cron run it, could someone maybe help me debug?( http://pastebin.com/PyyiyeqJ )
[04:07] <null1> KM0201: Do you have any idea how I might troubleshoot it, before I just throw my HD in the e-waste? :(
[04:07] <KM0201> can an encrypted hard drive be formatted?
[04:07] <rww> yes
[04:07] <KM0201> then i think that would be the answer
[04:08] <CarlFK> null1: ide encryption?  I am thinking whatever it is you can just format it.  not like my phone that is bricked
[04:08] <industry__> vu1kan: cron scripts run in a "clean" environment, usually with few or no environmental variables set
[04:08] <SPooN> do CD-R's work for making startup disks from .iso files?
[04:08] <tamaros> SPooN: if it has the space for the iso and you burn it corrctly to be bootable
[04:08] <vu1kan> industry__:  the script has absolute file paths, if that helps
[04:09] <KM0201> SPooN: sure they do.
[04:09] <SPooN> tamaros, how do I burn it correctly? :P
[04:09] <null1> CarlFK: during the installation process of ubuntu 10.10, I clicked full disc partition with LVM encryption
[04:09] <vu1kan> */paths/path...it only calls the one directory
[04:09] <CarlFK> null1: no prob - reboot the cd and start over
[04:09] <SPooN> I was asking because startup disk creator doesn't recognize the one I have in
[04:09] <KM0201> SPooN: http://www.petri.co.il/how_to_write_iso_files_to_cd.htm
[04:09] <tamaros> SpooN: that depends on the program you use to burn.  Some figure it out on their own some you have to tick an option
[04:09] <SPooN> thank you KM0201
[04:09] <null1> CarlFK: I did that, and it wouldn't let me install GRUB
[04:09] <KM0201> SPooN: that first utility there.. ISO Recorder, is awesome.. i'd use it.
[04:09] <pssalman> any one please help
[04:09] <pssalman> i have a Conexant AccessRunner ADSL WAN USB Adapter and i want to switch from windows to ubuntu! i have installed along side windows and i don't know how can i get my ADSL adapter to work under ubuntu? any help please?
[04:10] <pksadiq> !burn | SPooN
[04:10] <SPooN> KM0201, isn't that a windows utility? I'm on Ubuntu
[04:10] <KM0201> SPooN: oh.. if you're using ubuntu... use Gnomebaker... install it from synaptic...
[04:10] <SPooN> ok
[04:10] <SPooN> thanks to all ;)
[04:11] <KM0201> SPooN: after you install gnomebaker.. i believe you open gnomebaker then go to tools/burn CD ISO(or DVD, whichever media you're using)...  navigate to the ISO, and thats that
[04:12] <null1> full explanation: I started an installation of Ubuntu on my entire HD, realized that I had clicked the wrong encryption method ( I wanted 256bit serpent but I just used the default) and after I realized I had chosen the wrong one, I powered off the comp after the base installation completed and then I tried to start over with my pen drive installer. When I tried again, I errored out with installing GRUB on the master boot record
[04:12] <CarlFK> null1: I am guessing your disk is confusing the installer.  the encryption is just different bytes, not .. um... you can just overwrite them with new bytes.  assuming the tool doesn't get concerned with the old bytes
[04:13] <CarlFK> null1: i have had problems using disks from raid arrays as stand alone disks.  I think just running fdisk to create a blank partition table was all I needed to do.
[04:14] <foolhardy> x won't start. How do I tell ubuntu to use "NVIDIA accelerated graphics driver (version 173)" driver via the cli?
[04:14] <null1> So should I just execute a shell command from the installer on my pen drive to use fdisk and make a blank partition table?
[04:15] <usr13> foolhardy: nvidia-settings or nvidia-xconfig
[04:15] <usr13> foolhardy: nvidia-xconfig
[04:15] <CarlFK> null1: yep.
[04:16] <pssalman> i have a Conexant AccessRunner ADSL WAN USB Adapter and i want to switch from windows to ubuntu! i have installed along side windows and i don't know how can i get my ADSL adapter to work under ubuntu? any help please?
[04:16] <KM0201> pssalman: is the wireless device plugged in now?
[04:17] <usr13> !adsl | pssalman
[04:17] <R0b0t1> Hello, ah, the Ubuntu manpages have an entry for jscal-store, yet I am unable to install it.
[04:17] <R0b0t1> What do?
[04:18] <pssalman> no wireless.... it is just a usb modem... but how can i know that ubuntu got its driver?
[04:19] <r00t4rd3d> pssalman, type lsusb in a terminal
[04:20] <r00t4rd3d> then copy and paste the chipset line here
[04:20] <pssalman> okay... i will reboot to go to ubuntu and check...
[04:20] <r00t4rd3d> im looking for the chipset
[04:21] <r00t4rd3d> it will be near the end of the lsusb output
[04:21] <ambrosius> didn't know there are usb adsl modems
[04:23] <p_res> ambrosius: They're crap compared to ethernet model, but yeah they're out there in the wild.
[04:24] <null1> Those who are wiser than me: I am going through the installer again, and I am wondering if the installer is capable of overwriting my encrypted HD without asking me for a password? I am in the "partitions formatting" stage and I am about to re-partition my HD into just 1 hard drive, and it isn't prompting me for the password I had used to encrypt it, etc...Does that mean it hasn't actually tried to access the hard drive yet, or 
[04:24] <null1> into just 1 partition***="into just 1 hard drive"
[04:25] <industry__> null1: you don't need the password to re-partition an encrypted volume, assuming you're not interested in the data in it
[04:26] <technikfreak> happy new year
[04:26] <null1> industry__: Thank you :) :) That makes me think i didn't brick my system.
[04:26] <GeekSquid> null1: partitioning doesn't care if the drive is encrypted or not... it will just create a clean partition... Encrypted files mean they cannot be accessed without a key, but can be deleted by formatting
[04:27] <hacked_kernel> when i installed  Ubuntu I didn't choose the option to encrypt home partition, how can i enable this after the installation?
[04:27] <SPooN> yep another error trying to get Mint 10 to bootup. I give up. Sticking to Ubuntu singleboot afterall
[04:28] <blud> well linksys chat support was a lot of help  :|
[04:28] <KM0201> SPooN: what was the error?... if your PC is powerful enough, just set it up in vbox.
[04:28] <blud> lol.
[04:29] <blud> they said Yeah your router can do that but we only support that feature over the phone
[04:29] <SPooN> my pc isn't powerful enough :P
[04:29] <blud> and i look all over my router and i cant see that feature
[04:29] <TyrantElf> Why is everyone talking about encrypting things right now?
[04:29] <ohzie> rtdos: Sorry?
[04:30] <null1> TyrantElf: Because I fucked up while trying to install 10.10 by powering down during installation with a fully encrypted HD
[04:30] <KM0201> blud: did you really expect online tech support to be anything more than slightly useless?
[04:30] <pssalman> Bus 004 Device 002: ID 0572:cb00 Conexant Systems (Rockwell), Inc. ADSL Modem
[04:30] <blud> KM0201 no not really :p
[04:30] <TyrantElf> ahh, that would be a very good reason why.....
[04:30] <KM0201> blud: well at least it wasn't a let down
[04:31] <blud> so apparently what i want to do is called DHCP reservation
[04:31] <rtdos> i'm sorry, ohzie? did i miss something?
[04:31] <blud> i just want to set it via my router so that my wireless laptop has a static internal IP
[04:32] <KM0201> pssalman: i'm gonna go out on a limb and say you're probably SOL... http://www.uluga.ubuntuforums.org/showthread.php?t=1597605
[04:32] <DarsVaeda> how do i get my user to be part of the video group?
[04:32] <pssalman> KM0201 what is that? and how can i make the connection
[04:33] <KM0201> pssalman: did you not even read the thread?.. it discusses yoru device, and how to make it work.. and basically.. i'm gonna go out on a limb you will get nowhere w/ it
[04:33] <KM0201> pssalman: what version of linux did you install?
[04:33] <Nexxus> I have a movie that is in .avi format that i would like to burn to a dvd disk but when i put the file onto the disc it is just the file and can be played by computers but not by a DVD playing device. How do i get the .avi to burn to the sick so that i can watch it on a DVD player?
[04:33] <pssalman> Ubuntu 10.10
[04:34] <KM0201> pssalman: well, read the thread, you're gonna have to do a lot of it to get that device going
[04:34] <pssalman> KM0201: thank you
[04:34] <sacarlson> Nexxus: try look at k3b
[04:35] <p_res> Nexxus: You need devede.
[04:36] <blud> KM0201: i did more research and found out that the only thing they linksys tech guy told me wasnt even true
[04:36] <Nexxus> p_res what does that do
[04:36] <p_res> For it to be able to be read on a commercial dvd player, it has to be re-encoded.
[04:36] <p_res> Devede package allows you to add the file to the dvd and it will recode and burn it for you.
[04:37] <KM0201> blud: lol.. [gomer] surprise, surprise, surprise [/gomer]
[04:37] <blud> yeah..  lol
[04:37] <r00t4rd3d> just go buy a usb thumb drive :)
[04:38] <SPooN> !burn
[04:39] <Phong_> hi guys ineed help...why ihave extend my screen seperatedly but why i can't drag 1 window to the other..i can't see it
[04:39] <r00t4rd3d> funny how much samba can be a pain just to share a folder/file
[04:39] <Phong_> can someone help me?
[04:39] <Phong_> i have 2 monitors
[04:39] <Phong_> and 1 card has 2 output
[04:40] <Phong_> 1 video card has 2 output..so i have 2 monitor..but why i can't drag a window on to the other monitor
[04:40] <Phong_> any idea?
[04:41] <hacked_kernel> how to encrypt the home folder after installation of ubuntu?
[04:41] <SPooN> if I run kubuntu will it be faster than ubuntu..?
[04:41] <zulax> my touch pad is not working well - of course its hp- is there a way to check what the probelm is?
[04:41] <SPooN> hacked_kernel, google.
[04:41] <SPooN> is there a googlebot in here?
[04:42] <SPooN> .google encyption on ubuntu 10
[04:42] <KM0201> SPooN: not really... KDE is kinda like a linux virus.. :)
[04:42] <SPooN> does mint use kde or gnome?
[04:42] <KM0201> SPooN: mint has gnome and kde releases(and an xfce one to i think).. but that's really a uestion for mint support
[04:42] <SPooN> is kde better or worse than gnome? or is it just purely objective?
[04:43] <KM0201> !best | SPooN
[04:43] <SPooN> !mint
[04:43] <tamaros> i never liked the look of KDE
[04:43] <RootsBabilonia> how call one shell script using other shellscript?
[04:43] <KM0201> SPooN: it is purely objective... i'd rather get hit in the face w/ a concrete block than use KDE
[04:43]  * SPooN notes the avoidance of the word best in his question
[04:43] <SPooN> haha ok then
[04:43] <zulax> any tool to check the integrity of my touchpad mouse
[04:44] <RootsBabilonia> using diferent looping in 1 and other looping in other?
[04:44] <SPooN> this ubottu you guys have is pretty great
[04:44] <KM0201> !msgthebot | SPooN
[04:44] <elky> I'm pretty sure "linux mint" and "support" is an oxymoron
[04:44] <elky> their channel is tiny, their forums lacking :(
[04:44] <SPooN> too bad it doesn't support google searching
[04:45] <KM0201> elky: the mint support channel is pretty friendly, but you're right.. not very active... the times i've been in there though, the people were friendly and helpful.. just werent many of htem.
[04:45] <SPooN> elky, I know, I was just in there
[04:45] <SPooN> I was just in there, ended up helping instead of getting help :P
[04:45] <blud> ok so, I have this laptop with a wireless network card, and I want it to have a static IP,
[04:46] <blud> i have a main gateway router that doesn't have a DHCP Reservation feature
[04:46] <blud> and it's connected to another router that i'm using like a WAP that *does* have DHCP reservation
[04:46] <null1> I'm a little bit worried about this re-install I am doing over my encrypted HD, because last time I tried this the computer refused to install GRUB
[04:46] <blud> soo.. can I use that or do i need to set up a static ip on the client side in ubuntu?
[04:47] <sacarlson> blud: this looks like a good link that show you how: http://www.liberiangeek.net/2010/09/setup-permanent-static-ip-address-ubuntu-10-0410-10-maverick-meerkat/
[04:47] <TyrantElf> blud: try it and find out.  I'd say you could you it on the router that does have dhcp preservation
[04:47] <SPooN> how do you people find help posts so fast without a googlebot :O
[04:48] <blud> tyrantelf, although the DHCP server is disabled on the wap
[04:48] <blud> but yeah.. ok 2 good options to try
[04:49] <blud> yeah im 99.9% sure that i cant do it on the wap. doesnt make sense
[04:49] <blud> (unless i use it as my main router with dhcp, which i dont want to do for other reasons) so i'll try that client side thing
[04:49] <sacarlson> blud: TyrantElf: that a good option,  that's how I have my dhcpd setup to keep my users with the same ip by linking the mac address to an ip in dhcpd
[04:49] <SPooN> !bestbot
[04:49] <TyrantElf> blud:I'm not sure how that would go.
[04:49] <SPooN> bestbot isn't in #ubuntu-bots :(
[04:50] <KM0201> SPooN: he's probably drinking
[04:50] <KM0201> check again
[04:50] <breadcrumb> bestbot isnt anywhere
[04:50] <TyrantElf> blud: try it and find out, like I said.  It might take, what, 10 seconds?  it takes you longer to ask that than to test it.
[04:50] <fzlamn> hi all
[04:50] <SPooN> !bestbot | breadcrumb
[04:50] <breadcrumb> i know, but BestBot isnt even online
[04:50] <rww> BestBot has horrible uptime tendencies :(
[04:51] <skypent> Does it matter to use gedit or kdevelop when writing in python?
[04:51] <foolhardy> usr13, when trying to open nvidia-xconfig I get "ERROR: unable to write to directory"
[04:51] <tamaros> any basic text editor will do
[04:52] <skypent> Alright
[04:52] <sacarlson> skypent: it's all a mater of personal preference
[04:52] <SPooN> crap... I think I just got a cd stuck in my computer...
[04:52] <TyrantElf> foolhardy:sudo nvidia-xconfig
[04:52] <KM0201> rww: i always just thought he had holidays off
[04:52] <LorgonJortle> 'ello.
[04:53] <KM0201> 'llo
[04:53] <fzlamn> what is the diffrence betwen update manager, aptitude pakage manager and synaptic pakage manager?
[04:53] <foolhardy> TyrantElf, new x config file made, just reboot now?
[04:53] <SPooN> !update managers
[04:53] <LorgonJortle> I know this is not the right channel at all, but does anyone know what server/channel to sumbit GTK-- queries?
[04:53] <TyrantElf> foolhardy: yes
[04:53] <foolhardy> cool thanks for the tip
[04:54] <LorgonJortle> s/sever/network
[04:54] <rww> fzlamn: they're three different frontends to the same system. aptitude is command-line based, synaptic is GUI, update-manager is GUI and limited to updates, not installing and removing.
[04:54] <zevlag> Ok everyone, I have only 10 minutes to win this, please just spend 2 seconds and click +Vote: http://www.rtacabinetstore.com/contest/2010/12/01/new-house-new-kitchen-in-progress/ , please
[04:54] <rww> zevlag: Don't advertise in here.
[04:55] <fzlamn> rww: should i have all the managers?
[04:55] <rww> fzlamn: synaptic and update-manager are installed by default. aptitude isn't in 10.10 onwards. Which you use is a matter of preference.
[04:56] <rww> (isn't installed by default, that is)
[04:56] <fzlamn> rww: it is good for me to install aptitude?
[04:56] <rww> fzlamn: if you want to
[04:57] <fzlamn> rww: what is the advantages?
[04:57] <aroman>  Hey... I just install maverick in virtualbox, and I'm getting this message during sudo apt-get update: W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/maverick/universe/binary-i386/Packages.gz Hash Sum mismatch
[04:57] <fzlamn> rww: for installing aptitude.
[04:58] <rww> fzlamn: compared to apt-get (which is the other popular command-line package manager), it's nice because of various dependency resolution differences and its ncurses frontend.
[04:59] <fzlamn> rww: how about update via terminal, it is good?
[05:00] <rww> fzlamn: sure. Try them, pick the one you like.
[05:00] <blud> thanks sacarlson, that was super easy. Before I was trying to follow some complicated guide with manually editing text files and it didn't even work....
[05:03] <fzlamn> rww: i allways update via terminal and there is some error : Err http://ppa.launchpad.net maverick/main Sources 404  Not Found. why?
[05:04] <rww> fzlamn: because you added a PPA that doesn't exist
[05:05] <zedkappa> HAPPY
[05:05] <zedkappa> NEW
[05:05] <zedkappa> YEAR
[05:05] <zedkappa> :D
[05:05] <FloodBot3> zedkappa: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[05:05] <sangho> how can i get the default version of sources.list in Ubuntu 10.10?
[05:05] <Guest56687> happy new year:)
[05:06] <zedkappa> WHOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
[05:06] <fzlamn> rww: how to remove the PPA?
[05:06] <rs0832> Guest56687, Happy New year to you too
[05:06] <rww> fzlamn: find the line for it in /etc/apt/sources.list or /etc/apt/sources.list.d/* and delete it
[05:06] <rww> There's a GUI way through Software Sources too, but I don't know it.
[05:06] <fzlamn> rww: in the terminal?
[05:07] <rww> sure
[05:07] <fzlamn> rww: remove via terminal also?
[05:08] <rs0832> fzlamn, the gui way rww told you about is in the system menu>administration>software sources.. then the 'other software' tab
[05:10] <fzlamn> rs0832: software source? there is no software source here...
[05:11] <rs0832> fzlamn, in the system menu under administration?
[05:11] <breadcrumb> !oneko
[05:11] <rww> !-oneko
[05:11] <rww> should have known :(
[05:12] <rs0832> rww, unwanted entry?
[05:12] <fzlamn> rss0832: yes i look for it and no software source, in update manager did you mean?
[05:12] <rs0832> fzlamn, no on the gnome panel, the menus... in the system menu
[05:13] <rs0832> fzlamn, do you have synaptic package manager?
[05:13] <fzlamn> rs0832: yes
[05:14] <rs0832> fzlamn, open it, then in the 'settings' menu, select 'repositories'
[05:15] <fzlamn> rs0832: done
[05:15] <rs0832> fzlamn, ok.. click the second tab (other software) and uncheck the ppa if it is there
[05:16]  * bonjoyee Wishes a Happy & Prosperous New Year!!!
[05:16] <oDesk> hello all
[05:16] <fzlamn> rs0832: uncheck and remove?
[05:17] <rs0832> fzlamn, unchecking it will disable it and should be enough.. but you may remove it if you like
[05:17] <oDesk> i'm on 192.168.5.x and wanted to access other subnet which on 192.168.77.x how can i ?
[05:17] <brent> does anyone know how to get audio working over hdmi on nvidia 430 gt?
[05:18] <avis> happy new years ubuntuians
[05:19] <fzlamn> rs0832: which one is better? uncheck only or remove it?
[05:19] <KM0201> avis: likewise
[05:20] <rs0832> fzlamn, if you want to use the ppa in the future, unchecking it is better... when you want to use it you just have to recheck it rather than readd the ppa
[05:20] <me__w> i hav dwnloaded kubuntu how can i install in my ubuntu gnome???
[05:20] <xangua> me__w: sudo apt-get install kubuntu-desktop
[05:21] <Ibis> HAPPY NEW YEARS!!!131313
[05:21] <fzlamn> rs0832: just uncheck is better i guest
[05:21] <nit-wit> me__w, you can just install the desktop if you want kubuntu
[05:21] <rs0832> fzlamn, yes :)
[05:21] <me__w> xangua: no i hav downloaded bt how to install
[05:21] <oDesk> anyone?
[05:21] <fzlamn> rs0832: thanks for the knowledge
[05:22] <fzlamn> rs0832: :)
[05:22] <sync3times> oDesk,   what is the topology?
[05:22] <nit-wit> me__w, you can't in other then a virtual, or in another partition if you downloaded the whole ISO
[05:22] <aroman>  Hey... I just install maverick in virtualbox, and I'm getting this message during sudo apt-get update: W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/maverick/universe/binary-i386/Packages.gz Hash Sum mismatch.  I can't update or install some software.. it's very much a problem. Any help would be GREATLY appreciated. Thanks! :)
[05:23] <sync3times> oDesk, are both subnets on the same wire or are they separated by a router?
[05:23] <me__w> nit-wit: ya i hav downloaded whole iso kbuntu hlw to install in ubuntu now?
[05:23] <oDesk> sync3times: same wire, separated by Vyatta server
[05:23] <sync3times> oDesk,   the vyatta server is multi-homed?
[05:24] <agentgasmask> what is the off topic channel?
[05:24] <nit-wit> me__w, you can't install it into Ubuntu. What is it your trying to do
[05:24] <oDesk> sync3times: yes if i'm on vyatta i can access both subnets
[05:24] <Flannel> agentgasmask: #ubuntu-offtopic
[05:24] <oneliner> i think that what he wants is the kde ui
[05:24] <agentgasmask> Flannel: Thanks
[05:24] <nit-wit> oneliner, I think the desktop right
[05:24] <sync3times> oDesk,  is the server your default route for either side?
[05:25] <me__w> k bt i want kubuntu in my lapi how to install in in dat
[05:25] <me__w> nit-wit: dn tell me how to install kubuntu in my lapi
[05:25] <oDesk> sync3times: no
[05:25] <nit-wit> me__w, you want the Kubuntu desktop or a seperate install of Kubuntu then Ubuntu
[05:26] <sync3times> oDesk,  so you need to setup a  network route.       something like:    route add -net  192.168.X.X/24    gw  vyatta
[05:27] <sync3times> oDesk,   Both sides need routes setup .    they packets need to know how to get there and how to get back.    Or you can setup the routes on your default routers
[05:27] <oDesk> sync3times: ok, i'll try that
[05:27] <sync3times> oDesk,  how many machines need to talk accross the router?
[05:27] <oDesk> sync3times: mine only
[05:28] <sync3times> oDesk,   bear in mind also,   there is the concept of  forwarding.     If the vyatta is not setup to forward packets accross the interfaces, then it will be a wall
[05:28] <oDesk> sync3times: Vyatta can talk to other subnets nicely
[05:28] <Steve973> for usb-connected external hard drives, is the "sync" option when mounting slower than async?
[05:28] <karma_police> i messed up my /etc/samba/smb.conf file and didn't back it up to begin with..
[05:28] <nit-wit> me__w, if you just want the desktop look in synaptic for kubuntu-desktop I afraid to give you a terminal command here we are not communicating.
[05:28] <AbhiJit> how to open .lit book?
[05:28] <sync3times> oDesk,    you said mine.    you did not say how many boxes on the other side need to talk back?
[05:29] <nit-wit> 8I'm
[05:29] <nit-wit> *I'm
[05:29] <avis> i'm looking forward to a fun ubuntu desktop this NY
[05:29] <avis> omgubuntu is actually cool
[05:29] <avis> :)
[05:29] <Auriga> Anyone using Screenlets? Unckecking keep above isn't working so the screenlets are always on top. Anyone know how to amend this?
[05:29] <bluezonemobile> HappY NeW YeAr
[05:29] <gluxon> What would happen if you install ubuntu through the CD (Not wubi) and you deleted the partition ubuntu was on?
[05:29] <avis> happy new years Mr. Shuttleworth
[05:30] <oDesk> sync3times: i feel your first suggestion for adding route might work
[05:30] <KM0201> avis: i guess it depends on your idea of a "cool" desktop... I'm just happy that I don't hav to be afraid of every little link or website i go to.
[05:30] <oDesk> sync3times: i'll give it a try
[05:30] <sync3times> oDesk,   luck
[05:30] <gluxon> Would the computer stop booting past GRUB?
[05:30] <nit-wit> gluxon, yes
[05:30] <Prajwal> Happpieee new YEar!!!~!
[05:31] <nit-wit> gluxon, is this happening to you
[05:31] <rs0832> gluxon, you'd get a grub error 21 or something if i remember right
[05:31] <gluxon> Oh.
[05:31] <gluxon> That's what I thought.
[05:31] <gluxon> I deleted the Ubuntu partition, forgetting that GRUB was on it.
[05:31] <gluxon> Now I'm scared to reboot.
[05:31] <rs0832> gluxon, me too once :D
[05:31] <nit-wit> gluxon, easy fix though you just have to have the right bootloader in the MBR
[05:31] <AbhiJit> how to open .lit book?
[05:31] <gluxon> nit-wit: Yeah, I know :)
[05:32] <gluxon> I was just doing a clean reinstall though :/
[05:32] <gluxon> Okay, thanks guys :)
[05:32] <pssalman> KM0201: i have followed the tutorial... but how to make the connection
[05:32] <KM0201> pssalman: i have no idea... like i told you before, i thnk you're probably gonna find it's a futile effort
[05:33] <skypent> kdevelop is called a compiler?
[05:34] <coz_> skypent,   an IDE
[05:34] <pssalman> KM0201: i should buy an Ethernet router and get over this problem :P
[05:34] <oDesk> sync3times: it works perfectly
[05:34] <skypent> Thanks coz_
[05:34] <KM0201> pssalman: thats what i would do but... hey...
[05:34] <oDesk> sync3times: thank you
[05:34] <coz_> skypent,  its a D developent  E nvironment
[05:35] <Auriga> Anyone using Screenlets? Unckecking keep above isn't working so the screenlets are always on top. Anyone know how to amend this?
[05:35] <pssalman> KM0201: YEA?
[05:35] <coz_> skypent,  or  I ntegrated D evelopmen  E nvironment
[05:36] <skypent> I gotcha.
[05:37] <coz_> skypent,  did I go over board with that description?  yes?  lol
[05:38] <skypent> A little bit :D.  I googled IDE right after you told me it.
[05:39] <coz_> :)
[05:42] <comulent> hello boys and girls
[05:42] <blud> I'm trying to follow this guide that r00t4rd3d linked me to, http://ubuntuforums.org/showthread.php?t=202605  How to set up samba, and I'm at the step where you launch samba but it says command not found
[05:43] <fractal_heart> hi, anyone have working usb pass-through working in virtualbox-4, after installing the extension pack?
[05:43] <null1> Anyone still around who remembers my encrypted HD gaff? -- I just reinstalled without encryption, it seemed to wipe out everything okay and the installation completed successfully, yet now upon restart it is just stuck with a black screen and one of these: "_" blinking
[05:44] <dnivra> blud, which step?
[05:44] <blud> 1.1
[05:44] <AbhiJit> how to open .lit book?
[05:44] <blud> where you type samba and its supposed to run samba
[05:44] <dnivra> blud, samba runs as a daemon.
[05:45] <dnivra> blud, are you in prerequisites?
[05:45] <breadcrumb> blud: that tutorial is very old.. but anyway, try using smbd as the name of the service
[05:45] <dnivra> blud, sorry got it. run 'sudo service smbd start'.
[05:45] <blud> ok
[05:45] <anon__> Is there a way to disable the root shell prompt in revovery mode?
[05:45] <rs0832> AbhiJit, .lit is a microsoft reader format... i am not sure there are any free alternatives to it
[05:46] <blud> it says its already running
[05:46] <dnivra> anon__, you could try removing the recovery entry from grub?
[05:46] <shadaloo> hi what is the command to resart x
[05:46] <blud> i was supposed to stop samba and then make my config file
[05:46] <dnivra> blud, you were supposed to stop it as per this tutorial. didn't you stop it?
[05:46] <anon__> That works, anything less......nuke-ish?
[05:46] <coz_> AbhiJit,   a bit old but look here   http://ubuntuforums.org/showthread.php?t=633429
[05:46] <blud> i stopped it per this tutorial but the tutorial is wrong
[05:46] <dnivra> shadaloo, try 'startx'
[05:46] <blud> ie: i apparently did not stop it
[05:47] <oneliner> does anyone know "mad tracker" or knows of an app that could be run like, say frootyloops for ubuntu?
[05:47] <shadaloo> dnirva, x is bugged im in tty1 right now
[05:47] <blud> cuz the command they said wasnt correct
[05:47] <dnivra> shadaloo, what happens when you shift to tty7?
[05:47] <coz_> AbhiJit,   here also   http://linux.softpedia.com/progDownload/koobe-Download-29163.html
[05:47] <blud> so do i just say sudo service smbd stop?
[05:47] <dnivra> !tab | shadaloo you got my nick wrong
[05:47] <breadcrumb> i used the SAMBA tutorial from the server guide to get my samba share up and running, it is more up to date too
[05:48] <tsrk> How can I add SSH and networking to runlevel 1?
[05:48] <coz_> AbhiJit,   and this    http://dukelupus.pri.ee/convertlit.php
[05:48] <blud> alright i guess i will try to look at that..
[05:51] <chenxu> 大家好
[05:51] <dnivra> !ch | chenxu
[05:51] <dnivra> oops.
[05:51] <dnivra> !cn | chenxu
[05:51] <rww> hehe
[05:51] <chenxu> 什么意思阿
[05:51] <rs0832> dnivra, :D
[05:51] <chenxu> 看不懂阿
[05:51] <AbhiJit> coz_, rs0832 thanks. now installing callibr
[05:51] <dnivra> !cn | chenxu yoo hoo over here. read this ->
[05:52] <rs0832> AbhiJit, :)
[05:52] <chenxu> 没有 用汉语的阿
[05:52] <Ibis> sudu apt-get install 2010 & echo Happy New Years :D
[05:52] <Ibis> 2011*
[05:52] <chenxu> 会了
[05:52] <chenxu> 呵呵
[05:52] <swazzy> one quick question um does itune work on the mighty ubuntu?
[05:53] <rs0832> chenxu, 他的意思，这是英吉利海峡。在中国的帮助下，加入＃Ubuntu的- cn的
[05:53] <dnivra> swazzy, iTunes? Nope.
[05:53] <dnivra> !ipod | swazzy
[05:53] <dnivra> rs0832, google translate i bet?
[05:53] <swazzy> oh ok
[05:53] <rs0832> dnivra, yep :)
[05:54] <rs0832> dnivra, very handy tool
[05:54] <sacarlson> how can I setup an ssh tunnel that the client that logs into the tunnel only can us ssh to tunnel and nothing else?
[05:54] <r00t4rd3d> im so sick of reading about ubuntu "tablets" in all the linux news sites
[05:55] <dnivra> swazzy, i tried iTunes with wine but it doesn't work very well. what model of iPod do you own?
[05:55] <dnivra> swazzy, doesn't work at all actually :)
[05:55] <dnivra> rs0832, i know :). someone should update that factoid to put the text out in chinese; might be a better idea.
[05:55] <oneliner> r00t4rd3d: would you like to see a video instead? :P
[05:55] <microc0sm> i can longer move windows around  and also no min max and close in the corner any suggestions?
[05:56] <rs0832> dnivra, yes..
[05:56] <microc0sm> just looked up way to bring up config editor
[05:56] <GeekSquid> r00t4rd3d: I am waiting for the Honeycomb tablet from MOTO
[05:56] <microc0sm>  but not sure what to do now
[05:57] <al_nz1> with putty on local win machine can I scp a upload to remote?
[05:57] <sacarlson> what method of tunnel setup would be best to setup from the client that is on wifi to tunnel into a host that needs to remote desktop into the client?
[05:57] <GeekSquid> al_nz1: yes ... filezilla is easier
[05:58] <bluezone> i hate windows now lol, if only ubuntu could effectively play cnc3 :(
[05:58] <dnivra> rs0832, that chinese text is correct?
[05:58] <al_nz1> GeekSquid: might not have that option
[05:58] <rs0832> dnivra, the problem with it is the 'for help in chinese' is in english
[05:58] <al_nz1> syntx? scp user@xxx.xxx.xxx.xxx C:\windows.fil ?
[05:59] <rww> rs0832: The Chinese text right next to it says approximately the same thing.
[05:59] <rww> allegedly, anyway. I don't speak it.
[06:00] <dnivra> rww, could you edit the text such that it is fully chinese? do you have rights to edit the factoids? would be good if it was completely in chinese.
[06:00] <rs0832> rww, :) yes.. what i meant was it is in english[for help in chinese] and in chinese[you can visit #ubuntu-cn or #ubuntu-hk]
[06:00] <rs0832> dnivra, you can .. http://ubottu.com/devel/wiki/Plugins#Adding_a_factoid
[06:00] <Averna> Hi, I'm trying to download a game update to Ubuntu 9.10 . Was just trying to extract and change file permissions through the windows but I don't have access as root. can someone walk me through the terminal commands?
[06:01] <Scottzor> hey
[06:01] <blud> the samba guide breaks down almost immediately for me since i'm on mythbuntu and stuff just isn't there. So i'm trying to finish that other older guide
[06:01] <dnivra> rs0832, yeah i know :). just that if rww can do it, i needn't forward it and wait for review :)
[06:01] <rww> dnivra: I do, yes. I'd need to run any suggestions past an op that speaks Chinese, though, and the one that I know does isn't around.
[06:01] <oneliner> anyone ever made music on ubuntu?
[06:01] <rs0832> dnivra, ah :)
[06:02] <dnivra> rww, awww. bummer. guess i'll suggest the change.
[06:02] <rww> dnivra: It needs updating anyway to add that you use /join to join the channel. I've been waiting for him to be online to get that sorted too.
[06:02] <r00t4rd3d> bluezone, you can play cnc3 with PlayOnLinux
[06:02] <Scottzor> How would I go about making a file sharing server in my network on a ubuntu server
[06:02] <Scottzor> That windows/mac/linux users can all access with ease?
[06:02] <sacarlson> oneliner: you mean created music?  like with rosegarden? http://www.rosegardenmusic.com/
[06:03] <dnivra> Scottzor, you could try samba. win/linux machines with samba installed will work. dunno about mac. another choice is ssh i guess.
[06:03] <Scottzor> How does samba work?
[06:03] <dnivra> rww, alright then-i'll let you sort it out :).
[06:04] <Averna> can someone help me install my eternal lands game update? I have ubuntu 9.10
[06:04] <oneliner> sacarlson: that looks promising, thanks
[06:04] <dnivra> !samba | Scottzor
[06:05] <Scottzor> How does samba allow people to connect?
[06:05] <Scottzor> Do they have there own user account etc?
[06:05] <Tussock> Hello, everyone. I have a MacBook Pro 13", and I want to dual boot it with Ubuntu 10.10, currently I have OS X installed. Any advice?
[06:05] <tsrk> How can I add SSH and networking to runlevel 1?
[06:06] <dnivra> Averna, i guess you need to become root to do it. run whatever command that needs you to become root as root by prefixing a 'sudo' in front of it.
[06:06] <dnivra> Scottzor, Depends-you can make it no password required to read too i think.
[06:06] <Averna> I don't use terminal much - have done it but can't remember exact code
[06:06] <Scottzor> On my server can I just 'sudo apt-get install samba'?
[06:07] <Tussock> Any advice on dual boots for Macs? Or should I check out the Mac OS X room?
[06:07] <dnivra> Scottzor, yeah. that should do it.
[06:08] <r00t4rd3d> then you have to set it up
[06:08] <r00t4rd3d> which isnt a walk in the park for newbs
[06:09] <dnivra> Tussock, hope this helps https://help.ubuntu.com/community/MacBookPro.
[06:09] <sacarlson> would  zebedee be a better solution to setup a client to host reverse tunnel for remote desktop than an ssh tunnel?  as far as security on the host
[06:09] <Tussock> dnivra, thanks.
[06:09] <Averna> someone once gave me a list of unix coomands but it was lost in my hardrive crash
[06:09] <dnivra> Tussock, no problem :)
[06:10] <Averna> can anyone point me to a concise list of commands?
[06:10] <blud> man?
[06:10] <blud> idk
[06:11] <usaguy987> If I install ubuntu server am I able to install it down to just a console? no GUI at all?
[06:11] <rww> usaguy987: Yes. It doesn't install a GUI by default, in fact.
[06:13] <Tussock> dnivra, just a question: I'm on the webpage https://help.ubuntu.com/community/MactelSupportTeam/AppleIntelInstallation, and if you go down to the section under DUAL BOOT: MAC OSX AND UBUNTU, PARTITION, do I just partition straight or do I have to install "refit"?
[06:13] <Tussock> *do I have to install "refit" first?
[06:14] <dnivra> Tussock, I've not used a mac so i cannot help you out there :). maybe somebody else can.
[06:14] <Tussock> dnivra: :P Thanks anyway, I'll check out the Mac room :)
[06:14] <dnivra> Tussock, sure. sorry i can't help out much. no problem!
[06:16] <tzyys> hi
[06:16] <Tussock> Hello, tzyys, happy new year.
[06:16] <daedaluz> problems with video playback AND audio stuttering? search logs for "hpet", if any entries, add "hpet=disable" into boot parameters, it's a kernel bug. EOC.
[06:17] <usaguy987> that is awesome news!! the other question I have is if I install the server ubuntu will it have the full unix command set? I mean like nano, pine, etc... and not use this thing called a "busy box"?
[06:17] <tzyys> happy new year too u all
[06:17] <tsrk> usaguy987: It doesn't use busybox, but some utilities have to be installed with aptitude
[06:18] <tsrk> usaguy987: It depends if you do a default server or truly minimal (JeOS) install
[06:18] <blud> woot, i actually got my shared network folder stuff working
[06:18] <rww> usaguy987: It uses bash, not busybox by default. nano is default; for pine you'd want to install the 'alpine' package
[06:18] <tsrk> usaguy987: I think the default server install includes nano and stuff
[06:18] <tzyys> i had install ubuntu to dell netbook it work well
[06:18] <daedaluz> how is busybox not full unix command set?
[06:19] <usaguy987> alright- but they can all be installed? I ask this because I am reading "teach yourself unix in a week" by dave taylor, and I need a good distro with all the commands he talks about. I have Puppy linux now, and most of the commands he uses in the book do not work on it....
[06:19] <potat0> usaguy987: mandriva for newbies
[06:19] <potat0> ive heard its good for atleast newbies
[06:20] <daedaluz> just install the tools
[06:20] <potat0> i've had the back luck(or good?) of starting with gentoo
[06:20] <potat0> made life hell
[06:20] <potat0> but taught moar
[06:20] <rww> usaguy987: yes, they should all be there or be installable
[06:20] <dnivra> usaguy987, you can find out what tools he uses and install them. i think only the installation part would vary. tool would work the same.
[06:20] <sacarlson> usaguy987: doesn't the book recommend what destro to use?  if you choose to follow that book best to use his input
[06:21] <usaguy987> well I'm a newbie, but not in the true sense of the word... I want to learn unix from the ground up- that is, from the command line. I could care less about the GUI at this point. I want to learn the basics... operate it fully from an ssh client... That is my goal for now, I can learn a gui anytime....
[06:21] <potat0> im way too happy today
[06:21] <daedaluz> install Gentoo
[06:21] <daedaluz> be a pro in seconds
[06:21] <potat0> ^ only if you've a second box with google
[06:21] <usaguy987> well this book was written 7 years ago! lol.... he recommends telnetting into a unix box... lol
[06:21] <potat0> telnet _is good_
[06:21] <rww> no, it's not
[06:22] <dnivra> potat0, definitely not good!
[06:22] <potat0> well, for some reasons it is good
[06:22] <Gimbli> usaguy987: try debian netinstall. it offers the basic operating system without any additional tools or server services and you only need apt or aptitude to add additional stuff :)
[06:22] <liverwurst> telnet will save your butt one day
[06:22] <rww> If you're looking to get your password stolen, it's a good choice.
[06:22] <industry__> if that book is still using telnet then it's really old
[06:22] <daedaluz> it sounds cool, kinda like Telstar, the satellite the guys made a pop song out of
[06:23] <potat0> for diagnostics (and non paranoid mode) telnet is great
[06:23] <usaguy987> lol I know haha
[06:23] <rww> not throwing your password out there in plain text isn't paranoia, it's common sense
[06:24] <industry__> netcat is a far more useful tool than telnet
[06:24] <dnivra> usaguy987, any distro with a CLI. since he says telnet, you choose any distro. read his command, run it, get an error find out what's wrong and try fixing it. google will help a lot here. the tools as rww should be there and installable. you'll have slight hiccups only mostly but you'll get along fine.
[06:24] <daedaluz> srsly, install Gentoo or Arch if you want to learn CLI the good way
[06:24] <rww> and between that and openssh-server being horribly easier than any telnetd to set up on Debian/Ubuntu, there's no reason to use telnetd :\
[06:24] <usaguy987> OK cool thanks guys! I'm excited to learn this!! :)
[06:25] <potat0> true about the plaintext thing
[06:25] <potat0> oh well
[06:26] <akshit_> I have installed Ubuntu 10.10 on My Laptop with full Hard Drive Space, and now I wanna also install Windows 7 with it, so how can I make a partition for installing Windows 7????
[06:26] <dnivra> rww, and openssh-server being much more secure than telnetd :).
[06:26] <potat0> akshit_: fdisk?
[06:26] <potat0> gui: gparted
[06:26] <deww> akshit_: gparted, maye need to be installed
[06:27] <deww> windows 7 may attempt to takeover the bootloader so you may need to fix that
[06:27] <Gimbli> akshit_: and you should have a ubuntu cd at your hands afterwards as you might need to fix your mbr
[06:27] <potat0> talking of windoze
[06:27] <akshit_> potat0 and deww: Can you tell me in steps
[06:27] <dnivra> deww, not attempt to, it will :).
[06:27] <potat0> i forgot i needed to download win7 64bit
[06:27] <industry__> and also, you should back up your data before you try to install windows, as it has a good reputation for wrecking data
[06:28] <akshit_> Gimbli, but I installed it via a Pen Drive
[06:28] <dnivra> !fixgrub | akshit_
[06:28] <potat0> www.dedoimedo.com/computers/gparted.html
[06:28] <dnivra> akshit_, you'll need the grub thing later.
[06:29] <ugmg> akshit :  first windows and then  linux   or if u have enough Ram and disk space use vmware and install windows
[06:30] <akshit_> dnivra, OK
[06:30] <potat0> how much space is needed for windows 7?
[06:30] <potat0> i was thinking of gaming (haven't in a long while)
[06:30] <potat0> 20 gb?
[06:30] <dnivra> ugmg, i'd prefer virtualbox over vmware :)
[06:30] <rww> potat0: no idea. ask ##windows :\
[06:31] <sacarlson> I can't seem to find the zebedee package in synaptic in my ubuntu 10.04,  can someone look and see if this is just a mirror problem on my side by looking in your synaptic?
[06:31] <rww> !info zebedee lucid
[06:32] <Chris-Linux> Excuse me Dear Ubuntu Users, anyone here any good with Kernels/
[06:32] <Chris-Linux> ??
[06:32] <potat0> rww: seems dead, but asked there
[06:32] <potat0> Chris-Linux: ask
[06:32] <Chris-Linux> Basically i installed Ubuntu Ultimate which is running Mavrick.
[06:33] <Chris-Linux> And when i go to Compile ALSA it says that a ncursers library is missing
[06:33] <rww> Chris-Linux: Ubuntu Ultimate isn't supported here.
[06:33] <Chris-Linux> Noo, this is about Mavrick
[06:33] <potat0> Chris-Linux: install ncurses
[06:33] <akshit_> potat0, the setup is 3.5 GB and you can make hard disk 20GB Minimum, for best use.
[06:33] <rww> Chris-Linux: No, you're running an unofficial derivative, so you can't use #ubuntu for support.
[06:33] <potat0> its not there by default in ubuntu
[06:33] <Chris-Linux> Exactly, what command would i use to install it?
[06:34] <Chris-Linux> thats all im asking
[06:34] <Chris-Linux> because i have the same problem on my 10.10 install
[06:34] <potat0> apt-get install ncurses
[06:34] <rww> uh huh.
[06:34] <potat0> wait
[06:34] <Chris-Linux> it says there is no such package :(
[06:34] <potat0> apt-get install ncurses-* OR search and install
[06:34] <industry__> try aptitude search ncurses to find the right library
[06:34] <potat0> libncurses5 is what you're looking for
[06:34] <horseatingweeds> Is there a handy software package for monitoring board temps, fans, and so on?
[06:34] <potat0> probably
[06:34] <rww> !lm-sensors | horseatingweeds
[06:35] <industry__> you mean lm-sensors?
[06:35] <potat0> akshit_: thanks
[06:35] <Chris-Linux> not a problem. Thanks peoples =D
[06:35] <industry__> beat me to it, rww
[06:35] <sacarlson> rww: well that explains it ,  I guess it's no longer supported?  seems it stoped at karmic
[06:35] <sacarlson> rww: thank you
[06:35] <foolhardy> in the gui I can tell ubuntu to use "NVIDIA accelerated graphics driver (version 173)", how can this be accomplished in cli
[06:36] <rww> sacarlson: correct. it was removed from lucid per https://bugs.launchpad.net/ubuntu/+bug/495216
[06:36] <dnivra> foolhardy, try lshw.
[06:37] <foolhardy> dnivra, sudo lshw?
[06:37] <dnivra> foolhardy, yeah it does need sudo.
[06:37] <pssalman> KM0201: sorry for bothering... i have downloaded and installed gnome ppp (all downloads using windows) but the software doesn't detect my modem
[06:38] <gonzoism> i haven't been able to burn a cd in linux for a year.  anyone else been having these problems ?
[06:38] <foolhardy> dnivra, "sudo: lshw: command not found"
[06:38] <dnivra> foolhardy, it works fine here for me.
[06:38] <foolhardy> I'm using a stripped down ubuntu from xbmclive
[06:38] <foolhardy> ---xbmclive with geforce fx5500, so I have to tell it to use legacy drivers
[06:39] <gonzoism> it has been very irritating.
[06:39] <gonzoism> today i am getting this: wodim: CD/DVD-Recorder not ready.
[06:39] <gonzoism> different drives, different computers, different distros; all the same problem.  can't burn a cd.
[06:40] <dnivra> foolhardy, no idea. maybe somebody else can help. i'm not sure if lshw is the correct command either; just a thought.
[06:40] <gonzoism> km0201  do you know what kind of modem you have ?
[06:40] <rww> foolhardy: You'd have to ask the XBMC people about it. xbmclive makes packaging changes that we don't support, and isn't an official or supported derivative of Ubuntu.
[06:41] <rww> foolhardy: additionally, I don'
[06:41] <nit-wit> gonzoism, you can't burn a cd that boots or one at all
[06:41] <rww> t think we even support Ubuntu MID (which is what it's based on) any more :\
[06:41] <akshit_> I have installed Ubuntu 10.10 on My Laptop with full Hard Drive Space, and now I wanna also install Windows 7 with it, so how can I make a partition for installing Windows 7???? Can someone tell me how to do this, in steps.
[06:41] <gonzoism> nit-wit  one at all.
[06:42] <pavanai> akshit:do u hav gparted?
[06:42] <akshit_> pavanai, yes
[06:42] <xangua> !grub2
[06:42] <xangua> akshit_: always better install windows first and then anything else; you will need to restore grub
[06:42] <nit-wit> gonzoism, that s strange I have had very little problems, I know it doesn't help to say that sorry.
[06:42] <pavanai> akshit:try a resize
[06:42] <akshit_> pavanai, how
[06:42] <nit-wit> xangua, that is incorrect
[06:42] <pssalman> i need help with my usb adsl modem and ubuntu 10.10
[06:43] <pavanai> akshit:open gparted
[06:43] <akshit_> pavanai, ok
[06:43] <gonzoism> nit-wit:  that is ok.  i'm thinking it is some kind of kernel problem being it is across distros, i was looking for the answer you gave.  are you 32 bit or 64 ?
[06:43] <pavanai> akshit:select the partition
[06:43] <akshit_> pavanai, selected
[06:43] <pavanai> akshit:right click and click on resixe
[06:43] <nit-wit> xangua, restore grub yes but W7 can be installed second
[06:43] <pavanai> akshit:right click and click on resize
[06:43] <nit-wit> gonzoism, 32bit
[06:44] <akshit_> pavanai, Resize option is unclickable
[06:44] <nit-wit> pavanai, turn off the swao
[06:44] <sacarlson> so would strongswan be a better tunnel method for a client to setup reverse tunnel to enable a host to remote desktop in,  then an ssh tunnel method?
[06:44] <xangua> nit-wit: i said always better, not Allways by force
[06:44] <xangua> ......
[06:44] <pavanai> swap?
[06:44] <gonzoism> nit-wit  oddly enough, 8.04.4 can with different burners.  thanks
[06:44] <me__w> hey
[06:44] <horseatingweeds> rww, looks like I have lm-sensors installed. Are there commands or a UI? lm-sensor.org is confusing me.
[06:44] <pavanai> akshit:swao?
[06:45] <akshit_> pavanai, what swao?
[06:45] <me__w> nit-wit: m back,pls tell me how to install kubuntu on my lapi?
[06:45] <pavanai> akshit:turn off swao?
[06:45] <rww> horseatingweeds: take a look at the guide ubottu linked you to ;)
[06:45] <nit-wit> pavanai, hold on a second
[06:45] <gonzoism> horseeatingweeds:  you have the sensors command.  man sensors and see what it says at the bottom on "see also:"
[06:45] <akshit_> pavanai, how?
[06:45] <horseatingweeds> rww, I am. lm-sensors.org.
[06:46] <rww> horseatingweeds: the link was https://help.ubuntu.com/community/SensorInstallHowto :\
[06:46] <nit-wit> akshit_, are you on a live Ubuntu cd
[06:46] <me__w> i hav kubuntu.iso setup and dont know how to install it???????/pls elp me
[06:46] <akshit_> nit-wit, no I have installed it
[06:47] <akshit_> nit-wit, on My Laptop
[06:47] <nit-wit> me__w, sudo apt-get install kubuntu-desktop in the terminal
[06:47] <akshit_> nit-wit, with full hard drive space
[06:48] <pavanai> akshit:wt u mean by swao?isit swao or swap?
[06:48] <me__w> nit-wit: no man i hav downloaded kubuntu dekstop from download them all in mozilla now how to install it in laptop
[06:48] <akshit_> pavanai, when did I say swao, nit-wit said it
[06:48] <nit-wit> akshit_, so you want to shrink the HD to fit W7 in you need to resize that Partition from a live Ubuntu cd using gparted, and right click the swap to turn it off
[06:48] <akshit_> pavanai, its swap
[06:48] <pssalman> anyone would help with my usb adsl modem
[06:49] <xangua> me__w: no idea what you want to do, just make a partiton to it and install it like you installed ubuntu
[06:49] <thinh_> co ai o vietnamese ko
[06:49] <horseatingweeds> rww, indeed. That page is more helpful.
[06:49] <akshit_> nit-wit, thats it?
[06:49] <pavanai> akshit:did u get that resize option?
[06:49] <me__w> xangua: how to make partition dn
[06:50] <xangua> me__w: with gparted
[06:50] <xangua> from the live cd
[06:50] <akshit_> pavanai, let me go to Live USB, and then I'll chat wid u
[06:50] <nit-wit> akshit_, shrink the Ubuntu and make a ntfs partition for WE7 put a boot flag on it then install to that pre made partition.
[06:50] <akshit_> ok
[06:50] <me__w> nit-wit: after partition how to run dat setup
[06:50] <bucky> pssalman, have you checked this out https://help.ubuntu.com/8.04/internet/C/modems-adsl-usb.html
[06:50] <xangua> always better to make a copy of your files before modifying a partiton me__w
[06:51] <akshit_> nit-wit, how to make boot flag?? Is there an option for that?
[06:51] <me__w> xangua: ok thanks
[06:51] <pavanai> akshit,ok
[06:51] <thinh_> co ai o VietNam ko na
[06:51] <nit-wit> akshit_, you would right click on the ntfs and then flag then click boot
[06:52] <akshit_> nit-wit, ok thanks
[06:52] <akshit_> :)
[06:52] <nit-wit> akshit_, you build this partition to keep W7 from making Ubuntu unallocated. Do you know how many partitions are on the computer now?
[06:53] <Rena-> hi, I've been tinkering with xorg.conf and I have it seemingly working great - "sudo startx" gives me a nice working desktop, login screen looks fine... but when I log in the screen flashes and it logs me out again.
[06:54] <nit-wit> pavanai, sorry I didn't mean to interupt you I was just making sure we were on the same page.:)
[06:55] <coolness88> hi
[06:55] <deco> hello
[06:56] <TheMusicGuy> Happy new year.
[06:56] <Rena-> is there a config file or something that runs when I log in, that I need to tweak or get rid of to make GDM login work again?
[06:56] <comulent> hey all. i know this isn't exactly an ubuntu related question, but i have this super irritating bluetooth mouse that i can't figure out how to make it discoverable. It's branded "tecom" and I can't find any websites by them that would reveal the solution to this mystery.... any ideas? And yes, i've already tried holding down buttons in various combinations for more than 5 seconds at a time.....
[06:57] <TheMusicGuy> That being said...Why does nautilus crash when I try to view the properties on a .it (Impulse Tracker Module) file?
[06:57] <rooks> how to zoom out from zoom in? somehow my cat managed to enable zoom in feature in my ubuntu by lying on my laptop
[06:57] <xangua> rooks: Control+scroll
[06:57] <xangua> Super(windows)+scroll ; sorry
[06:57] <TheMusicGuy> xangua, actually those are both different types of zoom.
[06:58] <Ripley> I am having an odd issue with SSH tunneling.  I have a VPS of Ubuntu 10.04.  I get this error - Client connection closed before completion of protocol.  It seems to stall the page loading.  Its a fresh install.  I can also use the same setup with 2 other SSH servers without issue.
[06:58] <rooks> xangua, ah, thanks , its windowskey+scroll btw
[06:59] <tipu> is it possible to get some help regarding ubuntu?
[06:59] <xin> Anyoen have any idea on how to change BIOS Splash Screen??
[06:59] <rooks> !ask | tipu
[06:59] <raj-k> boards.4chan.org/g/res/15117172
[06:59] <raj-k> is this possible?
[06:59] <Xin> anyoen?
[06:59] <raj-k> or even likely?
[06:59] <raj-k> subject: Major flaw in kernel
[07:01] <tipu> i have fubared my ruby installation with Ubuntu 10.04.1. i got it from the repositories, then built my own using a tar file, and now would like to purge my both installations of it completely. how would i go about doing that?
[07:03] <xangua> tipu: just read the instructions to uninstall, normally just delete the program directory
[07:03] <bucky> tipu, does the build directory you dl'd have an option for make uninstall or some such?
[07:03] <CQN> hi, can anyone help me fix overscan with the radeonhd driver? i'm trying to do it with xrandr
[07:03] <CQN> i'm using this command: xrandr --output HDMI-0 --scale 0.9x0.9 --pos 500x500
[07:04] <CQN> the scale should be right or close to it, but the picture is still anchored in the top left, off screen
[07:04] <CQN> and --pos doesn't seem to fix that
[07:04] <bucky> tipu, if not you can probably remove it by manually deleting the ruby files under /usr/local  look at the time stamps if in doubt
[07:04] <gozznail> happy new year everyone
[07:04] <tipu> bucky: i am not sure, if it did i wouldn't be able to determine it, i'm relatively now to linux/ubuntu
[07:04] <sync3times> gozznail, happy new year
[07:05] <potat0> happy near year everyone
[07:06] <MrAnthrope> :)
[07:06] <tipu> does whereis help me in this situation at all? how do i determine whether it's been completely removed?
[07:06] <bucky> tipu, ls /usr/local/bin  is there a ruby binary in there?
[07:06] <gozznail> i have been trying to find a command to stop the xserver so i can install the nvidia drivers but all i can find on the net is wrong
[07:06] <MrAnthrope> Could someone explain to me how to get this installed and working in wine? This page is like no help, right? http://appdb.winehq.org/objectManager.php?sClass=application&iId=5997
[07:06] <tipu> bucky: no
[07:06] <bucky> tipu, you installed it from a tar ball?
[07:06] <tipu> bucky: but there is in /usr/bin/ruby1.8 (this particular one was installed from the repositories)
[07:06] <tipu> bucky: yes
[07:07] <gozznail> seems it has changed
[07:07] <xangua> MrAnthrope: just install wine and then just install that app¿
[07:07] <MrAnthrope> It's not working as intended :(
[07:07] <bucky> tipu, did you use a ./configure --prefix=/usr  or someother place?
[07:08] <tipu> bucky: no
[07:08] <MrAnthrope> When I try to click on Everquest2 it opens another launcher window with what looks like IE and the page doesn't load.
[07:08] <tipu> also, where can i go to determine the $PATH of a fresh ubuntu installation?
[07:08] <bucky> tipu, did you actually make install when it got done compiling?
[07:09] <apostatedpriest> happy new year everyone.
[07:09] <bucky> tipu, type env
[07:10] <tipu> bucky: i believe so. i am not 100% certain to be honest, as i was mostly following some site's guide
[07:10] <tipu> bucky: ok
[07:10] <bucky> tipu, which site?
[07:11] <Rena-> anyone? when I try to log in it just flashes and takes me back to the login screen. nothing in GDM logs to explain why.
[07:11] <tipu> bucky: unfortunately i am unable to determine at this point. i've visited well over 30+ sites trying to solve this particular problem and so i have forgotten.
[07:11] <Rena-> is there maybe a local xorg config file conflicting with xorg.conf?
[07:12] <tipu> bucky: what was the purpose of env?
[07:12] <bucky> tipu, go into synaptic and search for ruby and mark all for complete uninstallation and see if that cleans it out
[07:12] <bucky> tipu, it tells you your PATH
[07:13] <tipu> bucky: i am able to determine path by echo $PATH, but i was worried if i have added too much stuff to it and wanted to return it to it's original state.
[07:13] <toloykhan> hello
[07:13] <toloykhan> any body here
[07:13] <bucky> tipu, go into synaptic and search for ruby and mark all for complete uninstallation and see if that cleans it out
[07:13] <dnivra> is there a tool to defragment ntfs drives in ubuntu? I don't have windows anymore and fear that my ntfs partitions would get fragmented if I don't defragment.
[07:13] <tipu> bucky: i am doing that as we speak. i was originally connected via SSH, so this will take a bit to go into the GUI portion of it. i appreciate all the help thus far.
[07:13] <dnivra> toloykhan, there are about 1300 users here; not all are active though.
[07:15] <toloykhan> dnivra, I hope that you are active
[07:15] <dnivra> toloykhan, if you've a question about ubuntu, do ask. if somebody does know, they'll help out.
[07:16] <sync3times> dnivra,  not sure if its a good idea or not, but can you copy all your files out, delete them, then copy them back.   They would be optimal at that point
[07:16] <xper> happy new year...
[07:16] <toloykhan> ok, the question is how to add yahoo chat room to my xchat
[07:16] <dnivra> sync3times, wrong person perhaps?
[07:16] <sync3times> dnivra, maybe as part of a backup?
[07:16] <smw> toloykhan, I do not believe xchat can do that
[07:16] <sync3times> dnivra, you asked about defrag?
[07:16] <dnivra> toloykhan, use empathy or pidgin for that.
[07:16] <smw> toloykhan, the im client probably can
[07:17] <toloykhan> so, even with empathy I can't do that
[07:17] <dnivra> sync3times, oh yeah. okay. well i wish i could do that but i simply do not enough space on my hard disk to copy files and copy back. it is a good solution though.
[07:18] <smw> toloykhan, it probably can
[07:18] <toloykhan> im clint?
[07:18] <dnivra> toloykhan, empathy i'm not sure. pidgin sure can.
[07:18] <tipu> bucky: there was a number of ruby stuff there (gems as well), i marked everything for removal and applied it. it's removing as we speak.
[07:18] <horseatingweeds> rww, sensor-detect only found one driver, and that doesn't seem to give anything when you run sensors command.
[07:18] <bucky> tipu, if you're using the command line maybe apt-get purge ruby1.8  would be less trouble
[07:18] <toloykhan> I also try pidgin , but I don't know how to use it
[07:19] <tipu> bucky: i did that before. there was still a number of ruby items i had installed (a lot of them gem related, i believe).
[07:19] <dnivra> toloykhan, you can ask in #pidgin for pidgin related help.
[07:19] <tipu> bucky: now that's all gone, should i try installing again from repos? also, does apt-get vs. aptitude make a big difference in my case (that of a noob, i just want a dev server that's the whole purpose of this)
[07:20] <Jari0001> Hello!
[07:20] <bucky> tipu,  do you have the ruby command now?
[07:20] <bucky> is it gone
[07:20] <Jari0001> happy new year 2011
[07:20] <bucky> happy happy
[07:20] <tipu> bucky: The program 'ruby' is currently not installed.  You can install it by typing: sudo apt-get install ruby
[07:20] <Jari0001> i have 80 cd's i need to transfer to mp4
[07:20] <bucky> tipu, good.. start over
[07:21] <Jari0001> when i rip my cds with rhytmbox i wont get all the information what there is to get
[07:21] <tipu> bucky: i will be using the guide here: https://help.ubuntu.com/community/RubyOnRails
[07:21] <Jari0001> there is no artist name or number of the song
[07:21] <Jari0001> do i need to install a plugin ?
[07:21] <toloykhan> I will check that out and back here soon, thanx dnivra and others
[07:21] <landingonwater> auch.. updated ubuntu... cant boot now.
[07:22] <dnivra> toloykhan, no problem :).
[07:22] <landingonwater> i run vista and latest ubuntu
[07:22] <dnivra> landingonwater, what happens when you start the machine?
[07:22] <landingonwater> i choose ubuntu, and it just reboots into the bootmanager again :(
[07:23] <tipu> bucky: WOW, that fixed it. my problem was that 'gem command', gem was always giving me this odd ball error. so i nuked everything and it seems to have work. my only concern is that if i only had the CLI, how could i have done that?
[07:23] <landingonwater> i updated in ubuntu, and didnt notice the kernel update. stupid
[07:23] <bucky> tipu, rubygems is in the repos for maverick already just make sure you get the right version
[07:23] <landingonwater> dnivra: is there anything i can do ?
[07:23] <tipu> bucky: i think it was nuking the gems as well that helped, however i am not 100% sure. there is no command line possibility for nuking gems, AFAIK.
[07:23] <dnivra> landingonwater, can you access an older kernel?
[07:23] <tipu> bucky: i am not sure what maverick is
[07:23] <bucky> tipu, ubuntu 10.10
[07:24] <dnivra> tipu, maverick is the code name for ubuntu 10.10.
[07:24] <landingonwater> dnivra: i cant access anything. i do have a peppermint on cd though. but i dont know what the problem is.
[07:24] <tipu> i am not cool enough for code names, heh.
[07:24] <dnivra> landingonwater, you said you can access grub right?
[07:24] <tipu> bucky: i really appreciate the help. didn't think any place would be available at 11:24 PST new years eve, thanks again!! been driving me crazy for past 3 days, this problem.
[07:24] <landingonwater> dnivra: if i see the choice between windows and ubuntu, i guess thats the grub im looking at ?? or ??
[07:25] <dnivra> landingonwater, yeah. and do you see multiple entries of ubuntu there?
[07:25] <landingonwater> dnivra: ooh.. thats maybe windows ?
[07:25] <landingonwater> dnivra: i only see vista and ubuntu.. no more on that list :(
[07:26] <dnivra> landingonwater, do you see ubuntu more than two times?
[07:26] <landingonwater> dnivra: only once
[07:26] <dnivra> landingonwater, you updated ubuntu and there was a kernel update? are you sure?
[07:26] <tipu> does freenode block access from mibbit?
[07:27] <landingonwater> dnivra: yes.. there was a kernel update, and i was told to reboot to finish the installation
[07:27] <dnivra> tipu, yes it does. for more queries related to the above, please head to #freenode.
[07:27] <dnivra> landingonwater, and did you do anything like uninstalling old kernels before rebooting or did you reboot straight after update?
[07:27] <landingonwater> dnivra: when i chose Ubuntu, It just reboots
[07:28] <landingonwater> dnivra: there was a message saying i had to restart to finish the installation. i clicked resttart, and now im stuck.
[07:28] <landingonwater> dnivra: pretty dangerous update i would say :(
[07:28] <nullp0inter> im trying to find my Windows hard drive through xubuntu, however the 'Places' part of the task menu doesnt show up like it did with gnome...anyway to find it?
[07:29] <dnivra> landingonwater, so i'm pretty sure that old kernels still exist. could you pastebin your grub menu-i'll wait till you type everything out.
[07:29] <Guest24653> oh great a dumbed down version of xchat :P
[07:29] <dnivra> !pastebin | landingonwater
[07:29] <tipu> is kde vs gnome completely a subjective matter, or is there a technical reason to choosing one over the other?
[07:29] <nullp0inter> tipu, memory usage perhaps?
[07:30] <landingonwater> ubottu: thanks :)
[07:30] <dnivra> nullp0inter, you should perhaps ask in #xubuntu about this.
[07:30] <landingonwater> dnivra: how do i get the dump from grub ? i will need the peppermint then ?
[07:31] <dnivra> landingonwater, just boot your computer, type out the entries you see in grub and pastebin it. i assume you are using another computer?
[07:31] <rooks> tipu, KDE is prettier, but is more resource hungry, gnome gets stuff done and isnt an eyesore, just its not as shiny as kde
[07:32] <dnivra> landingonwater, if you are using the same computer, you can just pastebin grub.cfg/menu.lst depending on your version of ubuntu.
[07:32] <landingonwater> dnivra: only one laptop. but there is nothing to see really. after i chose Ubuntu and hit enter, it just restarts the machine. i think it say ntfs or something. maybe i cant see the disk ?
[07:32] <nullp0inter> dnivra #xubuntu is dead
[07:32] <landingonwater> dnivra: oohh.. crap... could that be the reason ?
[07:34] <denile> Hello all
[07:34] <Ripper_Owens> hello denile
[07:34] <Ripper_Owens> =D
[07:34] <cytenticle> Happy new years everyone
[07:34] <dnivra> landingonwater, could what be the reason? AFAIK, if there is a kernel update, a new grub.cfg/menu.lst is automatically generated which has entries for the new and old kernel. so you should be able to boot the old kernel still.
[07:34] <cytenticle> make 2011 awewsome
[07:36] <landingonwater> dnivra: okay.. i dont get the list showing the new and old kernel.
[07:37] <landingonwater> dnivra: will boot the peppermint now. auch... first day of the year :( what a sweet beginning :(
[07:40] <toloykhan> dnivra, and the other thanx for help , it's much easy with pidgin
[07:42] <pssalman> since my usb modem red light works ... how can i make a connection
[07:43] <pssalman> please help
[07:44] <toloykhan> passalman did you try sakis3g
[07:45] <pssalman> what is that?
[07:45] <sresu> I'm not able to use Amarok. <amarok --debug> gives this - http://pastebin.com/jvm8cSKc . How cxan I fix it?
[07:45] <dnivra> toloykhan, yeah sure. no problem :).
[07:46] <pssalman> toloykhan: what is sakis3g
[07:46] <dnivra> sresu, you should perhaps in #amarok.
[07:46] <fzlamn> what is the purpose of archive manager?
[07:47] <toloykhan> sakis3g is a software that help you connect with usb modems and phones
[07:47] <sresu> fzlamn: https://help.ubuntu.com/community/FileCompression
[07:47] <toloykhan> you can download it form www.sakis3g.org
[07:47] <landingonwater> dnivra, im in peppermint now. opened a console. i see my ubuntu dir. i used wubi to install ubuntu. what should i look for _
[07:47] <fzlamn> sresu: thanks
[07:48] <clgshaft> any experts for nvidia and hdmi audio? i cannot get it to work
[07:48] <R3D> Happy New Years 2 All
[07:48] <Ripper_Owens> thanks R#D
[07:49] <Ripper_Owens> *R3D
[07:49] <sresu> !tab | Ripper_Owens
[07:49] <Ripper_Owens> lol yeah i fail at life too. i wish tab could ocmplete that
[07:50] <Ripper_Owens> complete*
[07:50] <pssalman> toloykhan: that's for 3g broadband... i dun think it will work
[07:50] <deepsix> #twil
[07:50] <deepsix> oh shit
[07:50] <Re1ndeer> Hello, everyone. Heard about Ubuntu because The Summit Bechtel Family National Scout Reserve facebook page talked about a Eagle Scout using Ubuntu as an OS. The OS sounded interesting. Just wondering if someone could exsplain more about Ubuntu.
[07:50] <toloykhan>  passalman  what is your modem type?
[07:51] <smw> Re1ndeer, it is not something easily explained
[07:52] <smw> Re1ndeer, imagine asking us to explain windows to you ;-)
[07:52] <Re1ndeer> true.
[07:53] <dnivra> landingonwater, sorry mate was away. yours is a wubi install eh? should've mentioned that. can you boot windows?
[07:53] <bucky> ubuntu is so easy... even a scout can use it
[07:53] <smw> Re1ndeer, I am sure plenty of users here would be willing to answer narrower questions :-)
[07:54] <Re1ndeer> Well, lets start with how do I get started. :P
[07:54] <Bacta> How would I best diagnose a problem with my touchpad? It went dead a couple of weeks ago and I'm wanting to know whether it's hardware or something that went wrong with Ubuntu
[07:54] <UBuxuBU> driver issue
[07:55] <smw> Re1ndeer, download the live cd, burn it, and test it
[07:55] <Bacta> UByxyBU: Yes, apologies
[07:55] <smw> Re1ndeer, you do not need to install it to test it, but data is not saved between reboots and it runs dead slow
[07:55] <landingonwater> dnivra, so i have different problem maybe because i used wubi installer _
[07:55] <ox3a> I am getting a error "wget:invalid option -- '/' " (This was my first test but this error). someone can help me please?
[07:55] <nit-wit> landingonwater, did you losse the windows boot or just ubuntu
[07:56] <nit-wit> *lose
[07:56] <smw> ox3a, what were you doing when you got the error?
[07:56] <ox3a> smw, 1 sec.. screen shot
[07:56] <landingonwater> nit-wit, vista works fine, and the ubuntu shows up as an option when i boot. but restarts when i chose it
[07:56] <Re1ndeer> smw, so when it asks me to save, I save it to a blank CD?
[07:56] <dnivra> nit-wit, quick update-he updated his ubuntu, there was a kernel update, he restarted and when he chooses ubuntu now, it restarts instead of booting.
[07:57] <landingonwater> nit-wit, ubuntu is my main now, so im pretty screwed
[07:57] <nit-wit> landingonwater, hold on there is a thread for this on a forum
[07:57] <dnivra> nit-wit, ^^ is what landingonwater is having.
[07:57] <smw> Re1ndeer, you first download it, then burn it to a disk. I recommend using infrarecorder for burning it
[07:57] <Re1ndeer> ok
[07:57] <bucky> Re1ndeer, https://help.ubuntu.com/10.10/installation-guide/index.html
[07:57] <denile> ox3a, try quotes in your command maybe :)
[07:57] <smw> Re1ndeer, ubuntu is mostly for technically apt people. How good are you with computers?
[07:57] <nit-wit> dnivra, thanks
[07:58] <dnivra> nit-wit, sure np :).
[07:58] <UBuxuBU> ox3a, please tell us more
[07:58] <new> 大家聊什么呢
[07:58] <dnivra> !cn | new
[07:59] <denile> nice
[07:59] <new> 谢谢
[07:59] <Re1ndeer> swn, I think I am ok with computers. But I am willing to learn. :D
[07:59] <ox3a> denile, UBuxuBU i am taking a screeshote
[07:59] <landingonwater> haha.. the chinese are coming >D
[07:59] <Bacta> He said Thank you ;)
[07:59] <denile> ox3a, ok
[07:59] <UBuxuBU> ox3a, that / in a moount point
[07:59] <smw> Re1ndeer, being willing to learn is the best answer possible :-)
[07:59] <nit-wit> landingonwater, here is the thread the bootscript is really the important part in diagnosing this, this is mentioned in the main thread post, run it and post there, or read through and see if you recognize the fix. http://ubuntuforums.org/showthread.php?t=1639198
[08:00] <UBuxuBU> ox3a, did you install a dual boot
[08:00] <view666> 新年快乐
[08:00] <Iszak> When is the usb-creator on Ubuntu going to be fixed? i can't even use it because it keeps erroring with "failed to install the bootloader"
[08:00] <okapi> Hi to all and happy new year
[08:00] <SwedeMike> !cn | view666
[08:00] <denile> okapi, Hello. Happy new year
[08:00] <dnivra> Iszak, it's worked for me but not in 10.10. you can try unetbootin-works the same.
[08:01] <dnivra> !info unetbootin | Iszak
[08:01] <smw> HAPPY NEW YEAR! (in California)
[08:01] <view666> sorry,happy new year,everynoe
[08:01] <okapi> my synaptic seems to be broken, I can not update my system anymore. Anyone can help?
[08:01] <dnivra> smw, view666 okapi welcome to the new year :).
[08:01] <ox3a> UBuxuBU, yeah with vista
[08:01] <landingonwater> nit-wit, checking it out now >( guess many others will run into this problem. im in peppermint now. guess thats a good idea. burned it for fun, but now it seems useful, i hope
[08:02] <UBuxuBU> ox3a, did u do advanced or side by side
[08:02] <smw> dnivra, we survived yet another year
[08:02] <nit-wit> landingonwater, the wubi if fixed can also be moved to a actual partition if you want a little more stability.
[08:02] <Re1ndeer> HAPPY NEW YEAR (Washington State)!!!!!!!
[08:02] <Tito0096_> HAPPPPPPPPPPPPPPPPYYYY NEW YEARS FROM THE PST
[08:02] <landingonwater> nit-wit, dnivra thanks ... really... this is so messed up
[08:02] <Tito0096_> HAPPPPPPPPPPPPPPPPYYYY NEW YEARS FROM THE PST
[08:02] <FloodBot4> Tito0096_: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[08:02] <Iszak> dnivra, yeah i used that before.. but it makes me wonder why package and not test the usb-creator in 10.10
[08:02] <new> 我怎么去中文频道阿
[08:02] <nit-wit> landingonwater, your probably okay
[08:02] <dnivra> landingonwater, it always is. you're welcome :).
[08:03] <landingonwater> nit-wit, __ to an actual partition .. ooh.. so the wubi install is a problem in itself ?
[08:03] <DarkDante> hello and happy new year
[08:03] <ox3a> UBuxuBU, No just testing it only but i will do with advance option if it success(my test)
[08:03] <anon__> HAPPY NEW YEARS.
[08:03] <new> mi to
[08:03] <UBuxuBU> ox3a, did u use wubi
[08:03] <dnivra> smw, welcome to 2011 :). we will continue to survive-human spirit doesn't die easily just like ubuntu's spirit :).
[08:03] <new> new year haha
[08:03] <Tito0096_> WOOOOOOOOOOOOOOOOOOOOOOOOOOOOooo!
[08:03] <new> 怎么去中文频道阿
[08:03] <ox3a> UBuxuBU, yeah
[08:03] <dnivra> new, this is english support channel.
[08:04] <dnivra> !cn | new
[08:04] <UBuxuBU> ox3a, THE / indicates a mount point error
[08:04] <UBuxuBU> ox3a, wubi has some issues
[08:04] <cutiyar> iam using 9.04 now and i want to upgrade to 10.04 Lts DIRECTLY HOW CAN I DO THIS?
[08:04] <DarkDante> please help for ubuntu in italian
[08:04] <rww> !it
[08:04] <nit-wit> landingonwater, there are a few assoiciated with it like grub updates that put grub in the mbr then nothing boots, easy fix though. It has its use for some I don't use it myself.
[08:04] <ox3a> denile, UBuxuBU smw http://img195.imageshack.us/i/screenshotdmf.png/
[08:05] <smw> ox3a, what command did you run?
[08:05] <dnivra> cutiyar, two ways to upgrade to 10.04 are get the cd/iso and install 10.04 or 9.04 -> 9.10 -> 10.04.
[08:05] <nit-wit> landingonwater, if you post the script  will give you my forum link for you to PM me if needed.
[08:05] <nit-wit> 8I
[08:05] <nit-wit> *I
[08:06] <cutiyar> I KNOW ABOUT DOWNLODING BY IT WITH isO,BUT I NEED IT DIRECTLY TO 10.04
[08:06] <landingonwater> nit-wit, great.. that would be nice. and many other unlucky wubi victims will have use of it
[08:06] <cutiyar> dnirva,I KNOW ABOUT DOWNLODING IT WITH isO,BUT I NEED IT DIRECTLY TO 10.04
[08:06] <deepsix> Happy new years, everyone!
[08:07] <smw> !caps | cutiyar
[08:07] <ox3a> smw, i did run anything manually (Just i follow uck step). And uck did not give any wget option .
[08:07] <UBuxuBU> ox3a, u are going to have to uninstall wubi and reinstall it
[08:07] <ox3a> UBuxuBU, wubi is problem?
[08:07] <cutiyar> dnirva, it take too long if i didi 9.10 > 10.04
[08:07] <dnivra> cutiyar, if you download 10.04 iso and install, you'd be upgrading to 10.04 direct right?
[08:07] <UBuxuBU> ox3a, the wubi uninstaller is fast and uninstalls everything
[08:07] <UBuxuBU> ox3a, best ubinstaller ive seen
[08:08] <cutiyar> dnirva,yes but i wanted it by upgrading not downloading it by iso and burn it
[08:08] <UBuxuBU> then reinstall wubi or ill help u do a real dual booter
[08:08] <cutiyar> dnirva, ok thank i will download the lLTS 10.04
[08:09] <UBuxuBU> ox3a, yes somtimes wubi just fails
[08:09] <cutiyar> dnivra: ok thank i will download the lLTS 10.04
[08:09] <chalcedony>  i have a problem with installing ubuntu to usb. it says it's unable to mount
[08:09] <rww> cutiyar: There is no supported way to upgrade directly from 9.04 to 10.04. You need to go through 9.10.
[08:09] <cutiyar> rww, ok thanks
[08:10] <UBuxuBU> ox3a, i like wubi, i am using it now but i had to renstall it a couple times
[08:10] <dnivra> cutiyar, you can backup your packages and restore them if you like. i'll get you the link hold on.
[08:10] <dnivra> cutiyar, hope this helps http://www.ubuntugeek.com/backup-installed-packages-on-ubuntu.html.
[08:10] <ox3a> UBuxuBU, but it say downloading fail: gfxboot-them-ubuntu
[08:10] <UBuxuBU> ox3a, my real dual booters are better
[08:11] <cutiyar> dnivra, thnaks but its new install to 9.10
[08:11] <dnivra> cutiyar, oh fresh install eh? okay then :).
[08:11] <UBuxuBU> ox3a, try to fix it if u like but wubi uninstalls 1oo% in 2 seconds
[08:11] <cutiyar> dnivra,yes
[08:11] <UBuxuBU> and reinstalls fast
[08:13] <ox3a> UBuxuBU, how to uninstall it?
[08:13] <Evgeniy27> åñòü òå êòî ïî ðóññêè ãîâîðèò?
[08:13] <UBuxuBU> ox3a, windows add remove
[08:14] <ox3a> UBuxuBU, You mean uninstall vista?
[08:14] <UBuxuBU> ox3a, wubi is just a file in windows in your programs add remove section or it may be called uninstall install in vista
[08:15] <UBuxuBU> ox3a, yes the uninstall section of vidta
[08:15] <UBuxuBU> vista
[08:15] <UBuxuBU> ox3a, i had to redo my wubi a few times in 6 mos
[08:15] <ox3a> UBuxuBU,then i need to restart my pc
[08:15] <UBuxuBU> yes
[08:16] <UBuxuBU> ox3a, it is a great uninstaller gts it all out
[08:16] <UBuxuBU> back up all files
[08:17] <UBuxuBU> but u just installed it so u prolly have none
[08:17] <ox3a> UBuxuBU, i will get it as wubi.exe in add remove program?
[08:17] <UBuxuBU> ill look in mine ox3a
[08:17] <landingonwater> nit-wit, great instruction in the forum. i will find my old laptop and move on with the surgery. AND there is a fix for future problems wubi. but guess i will never use wubi again.
[08:18] <UBuxuBU> ox3a, IN W7 uninstall it shows the ubuntu emblem and says ubuntu
[08:18] <fluid217> Happy new year everyone
[08:19] <landingonwater> nit-wit, ubuntu site doesnt warn against Wubi. Apparently Wubi is only for testspin, and not for usage
[08:19] <fluid217> I'm using Ubuntu 10.04 LTS and have 2x wpasuplicants starting
[08:19] <ox3a> UBuxuBU, If windwos is problem then i can remove it
[08:19] <UBuxuBU> ox3a, only use the uninstall part in vista
[08:19] <nit-wit> landingonwater, it has its moments, yeah it is for trying out really.
[08:20] <fluid217> any ideas where the '/sbin/wpa_supplicant -s -B -P /var/run/wpa_supplicant' is being launched from ?
[08:20] <dnivra> landingonwater, i would suggest using a VM for a test spin though.
[08:20] <UBuxuBU> ox3a, dont go lookin for exe's
[08:20] <UBuxuBU> ox3a, somtimes vista and wubi clash
[08:20] <nit-wit> dnivra, I had LinuxMint in Vbox it ran quite well
[08:20] <nit-wit> dnivra, mint 10
[08:21] <ox3a> UBuxuBU, let me check it. But what if i do not install it again?
[08:21] <UBuxuBU> ox3a, thats ok too
[08:21] <dnivra> nit-wit, i run windows on vbox :). it's easier to test using VM's totally.
[08:21] <ox3a> UBuxuBU, ok
[08:21] <Rena-> anyone? can't log in, GDM stuck in endless loop, getting pretty annoying.
[08:22] <UBuxuBU> ox3a, if u want a real dual booter i have done about 30 of them
[08:22] <landingonwater> dnivra, well.. it was a testspin actually, and then i sort of just moved to Ubuntu :D
[08:22] <Rena-> can start x manually as root in VT but not through GDM. soon as I log in it goes blank and back to login screen.
[08:22] <dnivra> Rena-, press ctrl + alt + f1, login and run the command 'sudo service gdm stop'. then run 'sudo service gdm start'. hope this works.
[08:22] <Rena-> dnivra: done that numerous times now
[08:22] <dnivra> landingonwater, you could have just used live cd to test right?
[08:23] <dnivra> Rena-, i'm not quite sure how to help. maybe somebody else can. meanwhile check /var/log/messages to see if something is going wrong.
[08:23] <okapi> my synaptic seems to be broken, I can not update my system anymore. Anyone can help?
[08:24] <dnivra> okapi, what happens when you try to open synaptic?
[08:24] <UBuxuBU> ox3a the windows/ubuntu dual boot using side by side is better than wubi and extremely easy and the advanced is even better but more work
[08:25] <MSaki> wow
[08:25] <TULeGiT> hmm
[08:25] <TULeGiT> ok wait
[08:25] <MSaki> dont
[08:25] <landingonwater> dnivra, haha.. true.. you are right, but live cds are so slow, and i wanted to play with lightzone and some ruby, but i hate vista with all my heart, and i got into the nasty habit of playing urban terror as well :D
[08:25] <TULeGiT> y
[08:26] <okapi> dnivra: I am trying to update the system but nothing happening. Also the software update shows out of date for more than 40 days.
[08:26] <TULeGiT> wtf
[08:26] <dnivra> landingonwater, oh yeah they're very slow. that's why i boot iso's via grub2 to test or use VirtualBox.
[08:26] <dnivra> okapi, how are you trying to update the system?
[08:26] <MSaki> heh ubuntu freezes on older computers after hd instal why is that
[08:27] <dnivra> Rena-, gdm also creates logs in /var/log/gdm. check them out too.
[08:27] <dnivra> Rena-, maybe check only them ^^.
[08:27]  * skraito say hi all
[08:27] <Rena-> checked those, nothing unusual there
[08:27] <UBuxuBU> msaki its a kernal issue
[08:27] <okapi> dnivra: 2 ways: with the synaptic by reloading and marking all update and by using apt-get command
[08:28] <MSaki> wow
[08:28] <Rena-> the one thing I do see is in .xsession-errors: fatal IO error 2 (No such file or directory) on X server ":0.0"
[08:28] <UBuxuBU> ram leak
[08:28] <UBuxuBU> wb ox3a
[08:28] <avis> :/
[08:28] <MSaki> it gets to login and keeps bumping me back out of ubuntu desktop
[08:28] <dnivra> okapi, when you use apt-get command what happens?
[08:28] <MSaki> no answer? switchen to fedora
[08:28] <UBuxuBU> ox3a, do you want a realdualbooter
[08:29] <ox3a> UBuxuBU, i don't see any installed program in add remove
[08:29] <ox3a> UBuxuBU, i do not need it. Just i use it for wimax internet
[08:29] <UBuxuBU> ox3a, did u uninstall it
[08:29] <dnivra> okapi, are you able to download the package lists using 'sudo apt-get update' successfully?
[08:30] <okapi> dnivra: apt-get clean && apt-get update the system is reloading the repositories with few errors about pgp keys. Then apt-get upgrade nothing happening. No update found
[08:30] <ox3a> UBuxuBU, i do not see any program in win add remove
[08:30] <Rena-> oh, hey. someone chown'd my .ICEauthority. now it looks like it's working.
[08:30] <Rena-> wonder why that didn't show up before...
[08:30] <UBuxuBU> ox3a, its in vista uninstall
[08:30] <UBuxuBU> if u had wubi
[08:30] <Rena-> time to reboot and see what happens then
[08:30] <okapi> dnivra: I am using sudo -s before I start
[08:31] <UBuxuBU> ox3a, were u running the live cd or did u do a wubi install
[08:31] <dnivra> okapi, that's the issue probably. it fails to download a few package lists, uses the old package lists and so no updates but the package lists are indeed old.
[08:31] <dnivra> okapi, try a different mirror. might work.
[08:31] <avis> :)
[08:31] <ox3a> UBuxuBU, no direct dual boot
[08:32] <UBuxuBU> ox3a, u said wubi before
[08:32] <fluid217> hi everyone. On Ubuntu 10.04LTS (upgraded from previous versions) and I'm getting 2x wpasuplicant's launched on boot.
[08:32] <UBuxuBU> then its not in add remove oruninstall
[08:32] <fluid217> I'd like to find what's starting this one: '/sbin/wpa_supplicant -s -B -P /var/run/wpa_supplicant'
[08:33] <ox3a> UBuxuBU, sorry misunderstanding. So?
[08:33] <UBuxuBU> ox3a, if u wish to remove it u jist delete the partition if u backed up files
[08:34] <UBuxuBU> ox3a, do u have all files backed up and vista restore disks
[08:35] <ox3a> UBuxuBU, I can delete it no problem . Just i need to solve it in order to making costomize ubuntu
[08:35] <bruenig> suppose I resize my root partition (I have no separate /boot) by shrinking it from the front, will that fuck up efforts to boot from it?
[08:36] <UBuxuBU> it would be easier to delete the ubuntu prtition and reinstall it if u have ni important files in it
[08:36] <UBuxuBU> no*
[08:36] <bruenig> don't want to reinstall
[08:37] <UBuxuBU> ox3a, is this an fresh install or something you had for awhile
[08:38] <ox3a> UBuxuBU, Actually which i need to delete . windows ?
[08:38] <milligan> Morning. Anyone here experienced with wifi networks? I'm having some problems at home .. I'm getting packet loss to the router, and it's working quite unstable in general. I have a D-Link DIR-615. There are about 15 wifi networks in the area, so I'm suspecting interference, but forcing the channel to the most lone one (1) didn't make any noticable difference. Any suggestions ?
[08:38] <UBuxuBU> ox3a, what is your main os
[08:38] <ox3a> UBuxuBU, Ubuntu
[08:38] <UBuxuBU> oh now i get it ox3a
[08:38] <UBuxuBU> u installed vista 2nd
[08:38] <ox3a> yeah
[08:39] <ox3a> UBuxuBU, yeah
[08:39] <UBuxuBU> ox3a, its best to do vista 1st
[08:39] <UBuxuBU> then buntu
[08:39] <UBuxuBU> u prolly needto reinstall grub now
[08:40] <milligan> ..which is very easy if ubuntu is intact ..
[08:40] <UBuxuBU> but i have not done it tat way
[08:40] <ox3a> UBuxuBU, I also installed wine of ubuntu
[08:40] <UBuxuBU> try installing grub
[08:40] <ox3a> UBuxuBU, How?
[08:41] <UBuxuBU> have you backed up all your filees ox3a
[08:41] <UBuxuBU> files
[08:41] <milligan> ox3a, insert your ubuntu cd and boot from it. You can chose to do a repair in the menus. In the repair menu, chose to reinstall grub.
[08:42] <ox3a> UBuxuBU, that is mean installing ubuntu again?
[08:42] <UBuxuBU> listen to milligan
[08:42] <UBuxuBU> look up a few lines
[08:43] <UBuxuBU> just install grub , boot ubuntu cd , use repair option
[08:43] <UBuxuBU> install grun ox3a
[08:43] <UBuxuBU> grub
[08:44] <UBuxuBU> ox3a, no..reinstalling grub is not reinstalling the entire ubuntu os
[08:44] <nit-wit> milligan what repair menu
[08:45] <ox3a> UBuxuBU, ok. But you think uck problem will be solve then?
[08:45] <magn3ts> I can't login to my Google Account. My username is magn3ticpersonality (or magn3ticpersonality@gmail.com) and my password is st3ngam67UiX1! This has only happen since upgrading from 10.04 to 10.10.
[08:45] <UBuxuBU> ox3a, i think so
[08:45] <milligan> nit-wit, booting the cd there's a menu called repair, if iirc
[08:45] <UBuxuBU> ox3a, did u back up all files
[08:45] <ox3a> UBuxuBU, OK... can you tell me how to reinstall grub?
[08:46] <ox3a> UBuxuBU, From CD?
[08:46] <gobbe> magn3ts: login with browser or what?
[08:46] <UBuxuBU> i havent done that but milligan told u....boot cd, use repair, install grub
[08:46] <magn3ts> gobbe, yes
[08:46] <gobbe> magn3ts: contact google, logging to webservice has nothing to do with your operating system
[08:46] <nit-wit> milligan, I do this every day and I have never heard of reloading grub this way, to the mbr?
[08:46] <magn3ts> gobbe, it worked fine in windows
[08:47] <gobbe> magn3ts: what kind of error message do you get?
[08:47] <UBuxuBU> he installed vista 2nd
[08:47] <milligan> nit-wit, huh? You do what every day? I believe the CD has an option to reinstall grub. If not, you can drop to a console and repair it.
[08:47] <avis> rescue mode
[08:47] <milligan> nit-wit, and if you know the correct procedure, you should tell him how to do it, instead of arguing with me :)
[08:47] <avis> reapir grub
[08:48] <ox3a> UBuxuBU, OK
[08:48] <UBuxuBU> ox3a, sit tight for a moment
[08:48] <nit-wit> milligan, it is quite simple, you just boot the live cd and two commands in the terminal
[08:48] <ox3a> UBuxuBU, Going to do it right now
[08:48] <rww> magn3ts: Go ask Google about it. It has nothing to do with Ubuntu.
[08:49] <UBuxuBU> ox3a, well u will not say if u backed up files so...
[08:49] <nit-wit> milligan, I'm not argueing  was just trying to get the correct information posted
[08:49] <magn3ts> >:(
[08:50] <milligan> nit-wit, no probs :) As I stated earlier, I don't remember the exact details. Memorizing the ubuntu boot cd options hasn't been my main priority ;)
[08:50] <nit-wit> milligan, they will be back if they don't get it.:)
[08:51] <rallias> What package do I need to install to give my web server wpa compatibility?
[08:51] <deepsix> How can I tell if my CPU is 64 bit?
[08:52] <rallias> deepsix: whats the model?
[08:52] <UBuxuBU> look in bios
[08:52] <magn3ts> deepsix, in a terminal: uname -a
[08:52] <rww> uname -a just says whether your kernel is 64-bit, not the machine.
[08:52] <deepsix> Model is Intel celeron series
[08:52] <UBuxuBU> 32bit
[08:52] <rallias> deepsix: when did you get it.
[08:52] <rww> deepsix: some Celerons are 32-bit, some are 64-bit. Do you have the model number?
[08:53] <deepsix> shit dude this thing was running XP
[08:53] <UBuxuBU> 32bit
[08:53] <theholder> Hi
[08:53] <deepsix> um, I got the clock speed where is the model number?
[08:53] <rallias> deepsix: What year did you buy it in?
[08:53] <deepsix> I didn't
[08:53] <deepsix> I adopted it from my gramps
[08:53] <theholder> deepsix
[08:53] <rallias> what year was it built?
[08:53] <rww> deepsix: are you running a Linux on it right now, or Windows?
[08:54] <deepsix> I adopted it ha
[08:54] <theholder> good question rww
[08:54] <deepsix> idk
[08:54] <theholder> =O
[08:54] <deepsix> Ubuntu Lucid
[08:54] <rallias> deepsix: Just to be safe, run 32 bit.
[08:54] <rww> deepsix: run 'cat /proc/cpuinfo', get the model name
[08:54] <UBuxuBU> or look in bios
[08:54] <deepsix> yeah, I am on a i686
[08:54] <theholder> lolol
[08:54] <UBuxuBU> but its a 32 bitter
[08:54] <theholder> can anyone help
[08:55] <UBuxuBU> shoot theholder
[08:55] <theholder> Ubuntu 10.10 on an asus eee pc 701sd wifi when its turned off it locks up
[08:55] <deepsix> processor	: 0
[08:55] <deepsix> vendor_id	: GenuineIntel
[08:55] <deepsix> cpu family	: 15
[08:55] <deepsix> model		: 2
[08:55] <deepsix> model name	: Intel(R) Celeron(R) CPU 2.60GHz
[08:55] <FloodBot4> deepsix: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[08:55] <deepsix> stepping	: 9
[08:55] <theholder> the whole netbook
[08:55] <theholder> idoru :D
[08:55] <theholder> nice to see you
[08:56] <theholder> any idea UBuxuBU
[08:56] <laptop> pakielaewa
[08:56] <theholder> :O
[08:57] <UBuxuBU> i ned more information
[08:57] <deepsix> http://paste.ubuntu.com/549228/ heres the output
[08:57] <UBuxuBU> need
[08:57] <UBuxuBU> Deepsix the answer is inbios but its 32
[08:57] <deepsix> SOAB
[08:57] <deepsix> ok cool thanks
[08:58] <deepsix> I am going to go sob in my miserable corner
[08:58] <UBuxuBU> why
[08:58] <deepsix> ...with a 32bit cpu
[08:58] <UBuxuBU> nice lil unit
[08:58] <theholder> it is
[08:58] <theholder> UBuxuBU
[08:58]  * UBuxuBU waves to six..
[08:58] <UBuxuBU> yes theholder
[08:58] <theholder> what did need?
[08:59] <UBuxuBU> i am thinking
[08:59] <theholder> oh sorry =/
[08:59] <UBuxuBU> need more info
[08:59] <UBuxuBU> tell us more
[08:59] <theholder> well i can turn the wireless on and it functions fine
[08:59] <Rad-> Hey what's the name of the new X11 utlity thing that Ubuntu was thinking of using again?
[08:59] <Rad-> (forgot what category X11 falls into sorry)
[08:59] <rww> Rad-: Wayland?
[08:59] <Rad-> Thanks mate
[09:00] <theholder> its when i goto disable it the whole os and netbook freezes
[09:00] <Rad-> Display servers?
[09:00] <UBuxuBU> ur pullin my leg
[09:00] <rww> Rad-: yes
[09:00] <Rad-> thanks
[09:00] <theholder> ?
[09:00] <fictionboy> ...
[09:01] <UBuxuBU> theholder why do u disable it
[09:01] <theholder> because i dont need to use wifi all the time
[09:01] <fictionboy> hahaha
[09:01] <theholder> it has a fn key function
[09:01] <UBuxuBU> hmmm
[09:01] <UBuxuBU> u disable it and run the pc offline
[09:01] <fictionboy> ,.,
[09:01] <UBuxuBU> and it all freezes
[09:02] <Re1ndeer> Does anyone know why I am getting the message, "SYSLINUX 4.02 2010-07-21 EDD Copyright (C) 1994-2010 H. Peter Anvin et al" on a black screen?
[09:02] <r00t4rd3d> Re1ndeer, wait ....
[09:02] <r00t4rd3d> sometimes it takes a minute
[09:03] <theholder> yes
[09:03] <Re1ndeer> ok, that is what i thought it was.
[09:03] <r00t4rd3d> Re1ndeer, do you have a usb keyboard ?
[09:03] <fictionboy> 测试
[09:03] <Re1ndeer> I just wanted to know I wasn't going to be sitting for a hour for nothing.
[09:03] <r00t4rd3d> it should not be an hour
[09:03] <r00t4rd3d> like 1 minute
[09:04] <Re1ndeer> rOOt4rd3d: no
[09:04] <Myrtti> fictionboy: did you have a ubuntu question?
[09:04] <fictionboy> 很多阿
[09:04] <Re1ndeer> I don't have an USB Keyboard.
[09:04] <fictionboy> much more
[09:04] <r00t4rd3d> ok
[09:05] <fictionboy> 我是新手。。。
[09:05] <r00t4rd3d> how long did you let it sit ?
[09:05] <Myrtti> !english | fictionboy
[09:05] <fictionboy> ok thx
[09:05] <Rad-> fictionboy's a newbie?
[09:05] <Rad-> =P
[09:06] <Re1ndeer> r00t4rd3d, I just started it, I just wanted to make sure I didn't mess it up. :P
[09:06] <Rad-> I'm surprised irssi let's me see unicode. xchat sure as hell doesn't
[09:06] <r00t4rd3d> fictionboy is in china
[09:07] <fictionboy> newbie
[09:07]  * Rad- understands chinese lol
[09:07] <fictionboy> yes
[09:07] <r00t4rd3d> #ubuntu-cn ?
[09:07] <Rad-> Although I am having trouble getting something to...type chinese on linux.
[09:07] <fictionboy> yes ylmf ubuntu
[09:07] <Rad-> It's why I still stick with windows a lot of the time.
[09:08] <Rad-> I'm sorta running xmonad..so I don't exactly have a tray (nor particularily want one)
[09:08] <fictionboy> how to sync backup my web and mysql date?
[09:08] <fictionboy> data ..
[09:09] <fmoo> I really, really want  meta (instead of alt) to send ^[ to my terminal, without swapping alt and meta entirely (I prefer the existing bindings for alt and meta in metacity).  Does anyone have any idea how to do this?
[09:09] <theholder> UBuxuBU any ideas then?
[09:09] <MrDudle> say i went to download a copy of ubuntu 10.10 and it directed me to an attack site
[09:10] <theholder> :O
[09:10] <MrDudle> linuxfreedom was the mirror
[09:10] <MrDudle> firefox has not failed me yet
[09:11] <kingbdogz> Hello.
[09:11] <r00t4rd3d> why goto a 3rd party site to start with ?
[09:13] <r00t4rd3d> http://www.ubuntu.com/desktop/get-ubuntu/download
[09:13] <kingbdogz> Hey guys I have a problem. I'm trying to install Starcraft 2 - Wings of Liberty on my Ubuntu 10.10. I've ran into a problem while running the Installer.exe with Wine. I have Version 1.3 on Wine.
[09:13] <MrDudle> r00t4rd3d: i didn't
[09:13] <MrDudle> i clicked the little download button on ubuntu.com
[09:14] <MrDudle> redirected me to linuxfreedom.com which is an attack site
[09:14] <theholder> what does it say kingbdogz
[09:14] <kingbdogz> The problem is that it says it has "too many files open", so I checked up on google to see what was wrong. People suggested to increase ulimit (which I did, via ulimit -n 10000) but that did not solve the problem.
[09:15] <theholder> i normally use PlayonLinux
[09:15] <theholder> never had any issues
[09:15] <kingbdogz> What is it?
[09:15] <r00t4rd3d> kingbdogz, http://appdb.winehq.org/objectManager.php?sClass=version&iId=20882
[09:16] <kingbdogz> r00t4rd3d I am aware of that, and I have followed the directions.
[09:16] <r00t4rd3d> hmm
[09:16] <r00t4rd3d> try PlayOnLinux
[09:16] <r00t4rd3d> its an app
[09:16] <kingbdogz> Yes, I have copied the files onto my hardrive and then ran them through wine. Still no luck.
[09:17] <r00t4rd3d> You can get PlayOnLinux threw the synaptic package manager
[09:17] <UBuxuBU> got disconnected, where were we...
[09:17] <kingbdogz> Okay I'll check that out. Thanks for the help, I'll come back if I have any problems.
[09:17] <landingonwater> nit-wit: im back. fixed the problem with the info from the ubuntu forum. edited grub.cfg
[09:17] <r00t4rd3d> or here http://www.playonlinux.com/script_files/PlayOnLinux/3.8.8/PlayOnLinux_3.8.8.deb
[09:18] <lahwran> kingbdogz: attnetion please
[09:18] <landingonwater> nit-wit: will try their fix as well.. hopefully that will prevent further accidents.
[09:18] <nio707> hello all
[09:18] <nit-wit> landingonwater, cool I looked at that and just shook may head and said better  you then me.:)
[09:19] <billy> i cant get a dvd to play can anybody help
[09:19] <landingonwater> nit-wit: i used peppermint konsule to mount and then edit. hahaha.. yeah.. what a ride. wubi is not a good idea.
[09:19] <nit-wit> landingonwater, do you want the wubi to a partition link for a bookmark
[09:20] <fmoo> wow, I did a google search for: 'PlayOnLinux PPM'  and the top 10 results are for sulfide testing kits
[09:20] <UBuxuBU> billy what version of buntu
[09:21] <billy> 10.04 i think
[09:21] <landingonwater> nit-wit: what do you think is the best solution ?
[09:21] <landingonwater> nit-wit: what do you mean by bookmark ?
[09:22] <UBuxuBU> Install the libdvdread4 package bily
[09:22] <nit-wit> landingonwater, I would dual boot it but it is good to look at the HD setup first. I don't know what you have in it now
[09:22] <Shoggoth> everytime I go to the "Places" menu and try to browse a folder or a filesystem from the gnome desktop for some reason it opens vlc rather than a file browser
[09:22] <Shoggoth> any idea what would cause this?
[09:22] <billy> through the terminal?
[09:23] <UBuxuBU>  sudo apt-get install libdvdread4
[09:23] <UBuxuBU>     * Then open a terminal window and execute:
[09:23] <UBuxuBU>  sudo /usr/share/doc/libdvdread4/install-css.sh
[09:23] <nit-wit> landingonwater, here is a link for you to bookmark save of how to move that wubi to a partition as well if your brave. http://ubuntuforums.org/showthread.php?t=1519354
[09:23] <nio707> where i can find good books on directfb development
[09:23] <carson> Desbian Vs Ubuntu, i cant get Ubuntu on my desktop <I have it on this laptop>, but is desbian a good alternative? whats the difference from ubuntu and desbian?
[09:24] <landingonwater> nit-wit: well.. there is the wubi partition on sd1
[09:24] <Shoggoth> anyone?
[09:24] <nit-wit> landingonwater, do you have a raid setup
[09:24] <UBuxuBU> corruption
[09:24] <carson> *debian
[09:24] <billy> billy@billy-DIM4500:~$ sudo apt-get install sudo /usr/share/doc/libdvdread4/install-css.sh Reading package lists... Done
[09:24] <billy>  Building dependency tree
[09:24] <billy> Reading state information... Done
[09:24] <billy> E: Unable to locate package /usr/share/doc/libdvdread4
[09:25] <FloodBot4> billy: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[09:25] <UBuxuBU> try synaptic billy
[09:25] <UBuxuBU> update 1st
[09:26] <nio707> can any one please suggest me good book on directfb
[09:26] <UBuxuBU> billy i need to know if its really 1004 lucid
[09:26] <landingonwater> nit-wit: no raid. only one HD. its a laptop. haha.. i just look at your link. looks great.. not so great if anything goes wrong :D
[09:27] <Shoggoth> can anyone help?
[09:27] <billy> yeah it is i rememebered i downloaded a new copy and rebooted last week
[09:27] <landingonwater> nit-wit: what Ubuntu should offer is some migration software that could handle this problem.
[09:28] <UBuxuBU> i am goin to boot into lucid now billy
[09:28] <Shoggoth> please help!
[09:28] <landingonwater> nit-wit: at least i found you guys here on IRC, but a total noob would be lost completely
[09:29] <billy> thankyou
[09:30] <nit-wit> landingonwater, yeah it would be nice to see more work done with wubi so it is better
[09:31] <landingonwater> nit-wit: so... I should write the Ubuntu dev team so they can at least give better warning on the Ubuntu website maybe ? because I thought It was okay to run with the Wubi install
[09:31] <nit-wit> landingonwater, you know about partition limitation s in amounts and types
[09:32] <landingonwater> nit-wit: been awhile since i played with that. so i guess i dont. but for moving to a new partition i would need alot of free space i guess.
[09:33] <carson> Does anyone know of any good video/audio software for linux? not like itunes, but like adobe premiere elements and cooleditpro <adobe auditions>, some mixing tool of somesoft?
[09:33] <r00t4rd3d>  /set irc_conf_mode on
[09:33] <landingonwater> nit-wit: is it correct to assume that my current install depends on a healthy vista partition ?
[09:33] <nit-wit> landingonwater, you can have 4 primary partitions maximum, but you can have 3 primaries and then a extended which can have a unlimited logical type. Ubuntu installs to a logical and boots fine
[09:34]  * UBUxUBU sharpenshis cletes...
[09:34] <UBUxUBU> where were we
[09:35] <landingonwater> nit-wit: aah.. i see... so i better check twice before attemting anything. uuh... too much action for 1st of jan
[09:35] <Flannel> landingonwater: Your wubi install depends on a healthy NTFS partition, not the actually Windows install on that partition (except the boot loader stuff)
[09:35] <nio707> carson you can install vlc or mplayer
[09:35] <nio707> i use them and i like them
[09:35] <billy> hello
[09:35] <nerxgas> whats the advantage of 64-bit ubuntu over 32-bit?
[09:35] <landingonwater> nit-wit: so at least moving the bootloader is a good idea.
[09:36] <carson> okay il check them out, can they be profetional and really good, or are they like windows movie maker quality programs?
[09:36] <landingonwater> carson: i didnt follow that one.. what are you looking for ?
[09:36] <nerxgas> nevermind
[09:36] <nio707> carson if you want convertor or mixing software ?
[09:37] <nit-wit> landingonwater, with a partitioned install the grub bootloader would be installed and grub to Ubuntu. In wubi it isn't running grub or using it as a bootloader exactly, it is sort of a illusion
[09:37] <carson> nio707 Mixing, editing software
[09:37] <Flannel> carson: There's some stripped down versions, and some cadillacs as well
[09:37] <r00t4rd3d> carson, ReZound and Audacity
[09:37] <Flannel> carson: If you want simple you can get it, if you want whistles and bells, there's other programs that do that too.
[09:37] <nio707> for small conversion mplayer has mencoder which is perfect utility but it is a command line
[09:37] <nio707> utility
[09:37] <carson> landingonwater like how windows has windows movie maker (Adobe Premiere Elements is better but same idea), some editing/mixing softwares for audio and/or video
[09:38] <ox3a> I also tested UCk but still problem
[09:38] <jdoe123123> Where does Nautilus store the metafiles for folder views?
[09:38] <nit-wit> landingonwater, the dila partitined install would have grub in the mbr, and the grub menu for Ubuntu amd Windows
[09:38] <UBUxUBU> billy To install extra codecs, press Applications → Add/Remove..., type “codec” in the Search box and select which codecs you want to install. Press Apply to install the selected codecs.
[09:38] <nit-wit> *dual
[09:38] <r00t4rd3d> carson wine will also run cooledit pro
[09:39] <carson> Flannel well Im looking for a replacement for my Windows softwares, by whistles and bells do you mean lots of effects/filters/really good, or as in looks pretty
[09:39] <jdoe123123> Anyone know how to set the folder view global in nautilus?
[09:39] <carson> r00t4rd3d i tried cooleditpro threw wine and it crashs on startup
[09:39] <jdoe123123> I can only do it on a per folder bases
[09:39] <Teemu_K> is there a way to mount that ntfs drive which I used for wubi install
[09:39] <billy> i was just looking there it says i need ffmpeg codec library
[09:39] <Flannel> carson: The former
[09:39] <nio707> carson i never used vidio mixing software but you can use avidemux
[09:40] <Teemu_K> currently mount -t ntfs /dev/sda3 /mount/place doesn't work
[09:40] <carson> Flannel okay il check it out, is that for audio or video?
[09:40] <carson> nio707 avidemux, il check it out, thanks
[09:40] <landingonwater> nit-wit: hmm.... so there is no way around it unless i migrate it complete. would almost think a clean install would be an easier solution.
[09:40] <UBUxUBU> i never had to mount anything using wubi it does the loop for u
[09:40] <r00t4rd3d> carson, they say it should work ....http://appdb.winehq.org/objectManager.php?sClass=application&iId=19
[09:41] <nio707> carson also you can install kdenlive it is  very powerful software if yu want professional software
[09:41] <nit-wit> landingonwater, I would go clean install if it was me
[09:41] <Flannel> carson: the spectrum is available for both.  I didn't name any programs though, so you might be thinking of someone else recommending something.
[09:41] <billy> sorry removed dont worry i havnt slept from last night thanks for the help
[09:41] <carson> root4rd3d il check out ReZound, ive already used audacity on windows, and personaly id rather stick to other softwares but i could use that as a last resort
[09:41] <carson> nio707 kdenlive, okay il check this out, gotta write down all these softwares :P
[09:42] <carson> Flannel u said The former, i thought that was a program :P
[09:42] <ox3a> back
[09:42] <landingonwater> nit-wit: i think you are right. even though it might be possible to dig out of it. a clean install. and then ask Ubuntu to put a big warning sign on their website. Wubi is for trial only
[09:42] <ouyes> I have some data stored in my hard drive , that is very important to me, I do not want others to copy these data, is there a way to protect these data that anything copied from my hard drive would become trashes, no just encryption?
[09:42] <nit-wit> landingonwater, I have W7, and in a extended Maverick, linuxmint10, and Natty the release
[09:42] <Teemu_K> UBUxUBU: Well I'd like to use my stuff that is inside storage. and my ubuntu is installed there. ubuntu mounts it as blkdev. and I cannot use example game executables
[09:42] <jdoe123123> Anyone know how to set a folder view global in Nautilus?
[09:42] <nio707> carson for your reference there is a linux distribution which have all video editing mixing and dj software in it actually i forgot the name but it is ment for this purpose only
[09:42] <ouyes> of course I am running gnome 10.04
[09:42] <ox3a> UBUxUBU, still the error
[09:42] <Re1ndeer> is waiting 30 min for the OS to boot too long?
[09:43] <nit-wit> Re1ndeer, yeah
[09:44] <landingonwater> nit-wit: well.. im sick of the vista anyways. so maybe i will wait some time and simply clean the whole machine. im a photographer, so i need win for most editing. DxO, Lightroom and photoshop. Only programs I cant replace.
[09:44] <carson> nio707 really? well  if you think of it please tell :P im gonna go look up these softwares thanks everyone!
[09:44] <Re1ndeer> so what do I do?
[09:44] <cctx05> Hey everyone
[09:44] <_6502_> hello... how do I shut down that F**KING DUMB self proclaimed "smart" tab completion ?
[09:44] <carson> Thanks everyone for the softwares, im gonna check em all out :)
[09:44] <landingonwater> carson: bulgarian friend of mine is an editor
[09:44] <cctx05> I'm brand new to Linux...I'm LOVING Ubuntu so far....I'm sad I took this long to jump on board
[09:44] <Flannel> _6502_: Please mind your language.  Which tab completion?  What software?
[09:45] <nit-wit> landingonwater, you can do a W7 upgrade that is a little cheaper then a full price retail.  only have W7 because of a student discount, I'm a 99% open source user
[09:45] <landingonwater> carson: he tried out the linux stuff, and he says its not worth the while. so I guess you should go for a dual boot and whatever is your flavor.
[09:46] <landingonwater> nit-wit: a win7 upgrade ? hmm.. i have a legal vista. so that would be great.
[09:46] <ox3a> UBUxUBU,
[09:47] <UBUxUBU> billy You have to make sure you have enabled universe,multiverse repositoriesNow you need to run the following command to update the source list   sudo apt-get updateInstall mplayer using the following command   sudo apt-get install mplayer
[09:47] <nit-wit> landingonwater, I think you can still get upgrades from MS, not sure though. W7 isn't a bad set up,  just don't really need it, but 25$ well spent got the pro version retails at 200$
[09:47] <carson> landingonwater yah i have some good software for Windows, but it isnt compatible with Windows 7 <I miss XP soo much, hate 7> and i just wanna see if i can stick to linux instead of having to use the stupid windows 7 and do everything the hard way *IE Record everything in 7, then share files with XP in virtualbox <Cant record there because its not compatible with my mic> and mix it in virtualbox.*, I just wanna see if i can stick to j
[09:47] <carson> ust Linux or if i halfto do it on windows :P
[09:47] <UBUxUBU> sup ox3a
[09:47] <_6502_> flannel: ok... you know that self proclaimed smart feature so that when you press tab it only shows you what it thinks are reasonable completion instead of just completing using globbing ? ok... i want to kill, erase, drop, trash, annihilate, destroy that nice piece of software and I just want a bare tab completion... how can I do that ?
[09:48] <ox3a> UBUxUBU, still the error
[09:48] <Flannel> _6502_: In what software? firefox? a terminal? some other program?
[09:48] <_6502_> flannel: bash, sorry.... i thought it was obvious but probably it isn't indeed
[09:48] <UBUxUBU> what are you trying to accomplish ox3a
[09:48] <potat0> almost all terminals have tab completion
[09:49] <ox3a> UBUxUBU, UCK
[09:49] <UBUxUBU> tellme
[09:49] <landingonwater> nit-wit: win7 can be installed from hardrive as update. bit of a nightmare though. but since i dont want this wupi setup anyway, i might just wipe the whole disk.
[09:49] <ox3a> UBUxUBU, ?
[09:49] <Flannel> _6502_: To be honest, I'm not sure what smart tab completion you're talking about.  Is it substituting for what you've already typed somehow? or can you give an example?  my bash tab completion always does what I think your target behavior is
[09:50] <UBUxUBU> what is it that u truly seek ox3a i can easily do a real dual booter
[09:50] <UBUxUBU> i am not well heeled on the vista 1st thing u did
[09:50] <nit-wit> landingonwater, you can do a fresh install with the upgrade, I gotta crash now, glad your all et for now.:)
[09:51] <landingonwater> carson: win7 is not that bad. i have no problems with video editing. i use Vegas. but have vista on my new laptop. and Vista sucks bigtime.
[09:51] <ox3a> UBUxUBU, You mean which i have installed first vista or ubuntu ?
[09:51] <_6502_> flannel: i want to be able to say go to a directory where there is a file named foo.bar, type "gunzip foo<tab>" and getting it completed to "gunzip foo.bar" even if bar is not the filename extension that gunzip normally would expect
[09:51] <landingonwater> nit-wit: thanks alot for your help :)
[09:51] <UBUxUBU> ox3a, u said u had ubu 1st vista 2nd
[09:51] <UBUxUBU> i can do it the other way easy
[09:52] <ox3a> UBUxUBU, It was also misunderstanding
[09:52] <ox3a> UBUxUBU, I installed Vista first and then Ubuntu
[09:52] <UBUxUBU> shheez u change a lot
[09:53] <carson> landingonwater well videoediting is fine for me, id rather stick to one system but video editing isnt the problem, its audio thats my problem. I used CoolEditPro wich is an older software, not completly compatible with Windows 7, so i record audio in Windows 7, then bring it to XP to mix <I cant record in XP because VirtualBox crashs when i use my mic> and mix it in XP, so im trying to find a way to stick to one software
[09:53] <_6502_> flannel: ok... found it
[09:53] <UBUxUBU> well i can do a clean dually no sweat
[09:53] <jpapertowels> hey guys i'm considering switching my gaming desktop to ubuntu with wine being so improved since i last tried, but i'm worried about audio quality... is there a way i can get virtual 7.1 surround like i can with the THX option on windows with my SoundBlaster X-Fi MB2?
[09:53] <_6502_> flannel: i've had to remove something from .bashrc
[09:53] <UBUxUBU> if u back up all files
[09:54] <UBUxUBU> ox3a, does vista boot properly
[09:54] <ox3a> UBUxUBU, yeah
[09:55] <UBUxUBU> ok ox3a DO U HAVE impoertant files in the ubuntu installation
[09:55] <cctx05> I have a question..is it tough to upgrade to a new version of Ubuntu (or another distro)? I'm used to only upgrading an OS every few years with Windows...so I'm a little nervous about losing files
[09:56] <ox3a> UBUxUBU, Just downloaded some package for future installation(from Synaptic)
[09:56] <jpapertowels> so im guessing theres nothing for linux like the THX crystallizer that i can use with my sound card? its like the only thing keeping me from switching lol
[09:56] <ox3a> UBUxUBU, As my internet too slow
[09:57] <UBUxUBU> ox3a, ok, well, if vista in your 1st OS and its all good, and the ubuntu u tired to dual is not good, delete the ubuntu partition as long as there is no important files on it and as long as the other ppl here cant help u reinstall grub.
[09:57] <pa> happy new year
[09:58] <UBUxUBU> then we can do  GOOD DUAL BOOTER
[09:58] <UBUxUBU> ooops caps
[09:58] <_Synergy_> Anyone know what I need for ubuntu to recognize my hardware RAID 0 (ntfs) array? I'd like to be able to mount it after I boot into ubuntu.
[09:58] <pa> how do i install nvidia restricted module also on a custom compiled kernel?
[09:58] <pa> (i can enter X by changing back to nv driver)
[09:58] <ox3a> UBUxUBU, But is the dual boot issue with UCK ubuntu coustomize tool?
[09:59] <UBUxUBU> ox3a, i dont know
[09:59] <UBUxUBU> i think its a mount issue or grun i really dont know
[09:59] <UBUxUBU> grub
[10:00] <Gimbli> pa: I think that nvidia provides a binary package which will create the necessary driver while being executed
[10:00] <ox3a> UBUxUBU, Just i need UCK to work to customize Ubuntu properly
[10:00] <UBUxUBU> if u have just done the ubuntu install and have no fiwhat the UCK is UCK
[10:00] <UBUxUBU> ooops typo
[10:01] <UBUxUBU> i meant what the UCK is UCK
[10:01] <Gimbli> pa: that's how it worked while i was using Debian in the past on my desktop machines
[10:01] <UBUxUBU> if u cant even boot to the ubuntu partition who cares about customizing at this point..u need a good dual os 1st
[10:02] <UBUxUBU> u can try to use the repair options mentioned earlier or we can start again
[10:03] <UBUxUBU> u said vista works fine, and u have no important files in ubuntu so....lets boogie.
[10:04] <UBUxUBU> lets do this...
[10:05] <ox3a> UBUxUBU, OK.... Will it delete all the downloaded package from synaptic(my internet is very slow ... )? Just i installed the ubuntu 4 hours ago
[10:05] <Guest9688> is there  a prob with the 10.10 network - tried kubuntu and ubuntu  and a distro based on it and can't connect eth0 or wlan0
[10:05] <gobbe> _Synergy_: what kind of hardware raid-device you are using?
[10:06] <UBUxUBU> ox3a, yes
[10:06] <UBUxUBU> ox3a, u try try other ppl here maybe they can fix it i cant
[10:07] <UBUxUBU> i just know how to dual boot cause i have done a bunch of them
[10:08] <UBUxUBU> you seem to have inferred the repair options failed
[10:08] <pjs_> Hi, can anyone tell me what to do if gnome-panel has its config corrupted? my hard drive had bad sectors and now all I get at login is my desktop, no icons/menus/task-switcher
[10:09] <juniour> hi
[10:09] <UBUxUBU> Download panel restore
[10:09] <juniour> happy new year to laa
[10:10] <UBUxUBU> $ gconftool-2 --recursive-unset /apps/panel      $ pkill gnome-panel
[10:10] <juniour> hey i have install universal usb installer and installes this in my usb now wt ? to do to boot through usb
[10:10] <skumara> when I connect my ipod touch 4G it is mounted as camera at gphoto2://[usb:002,005]/. I can't sync with rhytmbox nor mount it as a removable drive. Can anyone help me to sync ipod to ubuntu?
[10:10] <juniour>  help me
[10:10] <eryio> hi
[10:11] <eryio> is it possible to jailbreak iphone with ubuntu ?
[10:11] <aurilliance> I'm trying to follow https://help.ubuntu.com/community/FixShowAllUsers but there is no directory /apps/gnome-system-tools. I'm running the latest stable version of ubuntu. Advice?
[10:11] <juniour>  hey i have install universal usb installer and installes this in my usb now wt ? to do to boot through usb
[10:11] <UBUxUBU> JUNIOR set bios to boot from usb
[10:11] <Flannel> aurilliance: create it.
[10:11] <skumara> ubottu ipod
[10:12] <juniour> iUBXxBUX i hve to give 1st priorty to usb for boot
[10:12] <gobbe> juniour: how did you create usb-stick?
[10:12] <aurilliance> Flannel, really? I don't see any option to add a folder, only the ability to add a new key...
[10:12] <UBUxUBU> yeah juniour or at least make sure it set to boot before the HD
[10:13]  * UBUxUBU does a lil ap dance around juniour ...
[10:13] <juniour> gobbe i have installed universal usb installer in my 4gb pen grive
[10:14] <juniour> gobbe?
[10:14] <gobbe> juniour: installer? you need to create a stick with installer
[10:14] <juniour> how
[10:14] <gobbe> juniour: so you run installer and select correct iso-image to be copied to stick
[10:14] <juniour> gobbe wt stick
[10:14] <juniour> ya
[10:14] <juniour> ya
[10:15] <juniour>  i havs selected the iso
[10:15] <juniour> then it started compressing
[10:15] <juniour> gobbe this the way na
[10:15] <juniour> ?
[10:16] <gobbe> juniour: so you selected iso from step 1, choose correct drive from step 3 and clicked create?
[10:16] <juniour> ya
[10:16] <juniour>  then it started compressing
[10:17] <UBUxUBU> boot it
[10:17] <juniour> it installed here bu how to boot
[10:17] <gobbe> and when it is done you jsut boot your computer
[10:17] <juniour> ?
[10:17] <juniour> gobbe
[10:17] <juniour> ?
[10:17] <gobbe> and select usb
[10:17] <FloodBot4> juniour: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[10:17] <UBUxUBU> go to set up and set it  to boot from usb baby
[10:18] <juniour> ya i vave booted but windows open only
[10:18] <juniour> no other option
[10:18] <UBUxUBU> sometimes you have to press f8 at start up
[10:18] <UBUxUBU> to get into bios
[10:18] <UBUxUBU> tap tap tap f8 or another f key at start up junior!
[10:18] <juniour> f8 for advancd recovery
[10:19] <UBUxUBU> try f2 juniour
[10:19] <UBUxUBU> or f12
[10:19] <UBUxUBU> its one of em
[10:19] <juniour> k
[10:19] <UBUxUBU> what brand of computer juniour
[10:19] <juniour> sony vaio
[10:20] <UBUxUBU> f2 on vios
[10:20] <ox3a> UBUxUBU,
[10:20] <UBUxUBU> junior its f2 on sony vios
[10:20] <juniour> k
[10:20] <juniour> i will try
[10:20] <UBUxUBU> peace be with you man
[10:21]  * UBUxUBU hands junior a few walnuts...
[10:21] <frobisher> ox3a look at PinguyOS,just google it.
[10:21] <UBUxUBU> sup ox3a
[10:22] <UBUxUBU> what can i do you fir?
[10:23] <ox3a> frobisher, that is OS?
[10:23] <frobisher> ox3a,yes it is.
[10:24] <ox3a> frobisher, Ubuntu base which is made someone... So like this i want to make
[10:24] <frobisher> It is all configuered right out of the box.
[10:24] <frobisher> It is ubuntu based
[10:25] <UBUxUBU> all roads lead to gnome...
[10:25] <XuMuK> Happy New Year!! :)
[10:26] <_Synergy_>  Anyone know what I need for ubuntu to recognize my hardware RAID 0 (ntfs) array?    [ a link to the motherboard: http://ca.asus.com/product.aspx?P_ID=YATvwCy0OZLGNWwp ]
[10:26] <UBUxUBU> driver issue
[10:26] <gobbe> _Synergy_: that's not real hardware raid
[10:27] <_Synergy_> I'm using a software raid?
[10:27] <_Synergy_> it is recognized in my bios before i even go into an OS
[10:27] <UBUxUBU> is it SATA synergy?
[10:28] <_Synergy_> yes
[10:28] <UBUxUBU> yikes
[10:28] <UBUxUBU> how old is the computer
[10:28] <_Synergy_> I cant find the name of the raid controller, all I see is an "SB850 chipset) on that page
[10:28] <gobbe> _Synergy_: yes it is, but it's not proper hardware raid, so you need to have drivers for that
[10:28] <_Synergy_> the motherboard is 6 months old
[10:28] <UBUxUBU> thats not a good thing
[10:28] <_Synergy_> thanks gobbe, any idea where I can get a driver for linux? I got one for windows from asus but there are no linux downloads there
[10:29] <gobbe> _Synergy_: try to google with your motherboard model and linux
[10:31] <UBUxUBU> new mobos should handle sata NP
[10:31] <_Synergy_> sata ya.. but sata & raid is another ballgame, yes?
[10:31] <UBUxUBU> still should
[10:31] <UBUxUBU> on new one
[10:31] <UBUxUBU> hmmm
[10:31] <UBUxUBU> what is the mobo model number
[10:32] <_Synergy_> i'm starting to think there is no linux driver because it's semi new
[10:32] <UBUxUBU> that is what i was worried about earlier
[10:32] <_Synergy_> ubu: http://ca.asus.com/product.aspx?P_ID=YATvwCy0OZLGNWwp it's an M4A87TD
[10:32] <UBUxUBU> but asus should be able to help u
[10:33] <UBUxUBU> whatv linux distro have u tried
[10:33] <ox3a> 1 ,omo
[10:34] <nawk> The aufs file system for '/' created by the Ubuntu 10.10 liveUSB is too small, is there a way I could configure it so that it will create a filesystem of a larger size?
[10:34] <nawk> Once I'm in the LiveCD environment, the amount of free space is ~5MB
[10:34] <_Synergy_> ubu : just ubuntu 10.04
[10:35] <UBUxUBU> try kubuntu
[10:35] <UBUxUBU> 1004 or 1010
[10:35] <_Synergy_> hmm you think kubuntu comes bundled with it?
[10:36] <UBUxUBU> its possible
[10:36] <UBUxUBU> it may be your only hope
[10:37] <UBUxUBU> kubuntu is LOADED
[10:38] <UBUxUBU> but asus already knows if they have driver support for that mobo
[10:45] <UBUxUBU> http://www.mododl.com/nt/ubuntu-10-10-sata-raid     may help u _Synergy_
[10:45] <UBUxUBU> 10.10 mayb help in this case
[10:45] <lahwran> sed -i is "alter in-place" correct?
[10:46] <_Synergy_> hmmm thanks
[10:46] <UBUxUBU> that link offers sata raid drivers
[10:46] <UBUxUBU> hehe
[10:46] <UBUxUBU> but u may need 10.10 ubuntu
[10:46] <UBUxUBU> i would be interested in knowing if that worked
[10:50] <exxtreme> Is there a bluetooth file transfer application (besides kbluetooth)  with a GUI ?  I want to transfer files from mobile phone to linux
[10:52] <gobbe> exxtreme: gnome has also bluetooth-gui
[10:53] <exxtreme> ok. thanks
[10:55] <juniour> hey happy new year to all
[10:56] <juniour> hey i am using ubuntu 10.10 in usb
[10:56] <juniour> and there is insall option forf that
[10:57] <r00t4rd3d> should be right on the desktop
[10:57] <juniour> i fi i install this my earlier ubuntu 10.04 will runied or not
[10:58] <juniour> i have installed ubuntu in windows 7 through wubi
[10:58] <juniour> 10.04
[10:58] <gobbe> juniour: why don't you just update your current one to 10.10?
[10:58] <r00t4rd3d> ya
[10:58] <juniour> how to do that
[10:58] <Dr_Willis> ive heard bad things about upgradeing wubi installs..
[10:58] <juniour> ?
[10:59] <juniour> how i update my 10.04 to 10.10
[10:59] <r00t4rd3d> i personally would just uninstall 04 and go with a frsh 10
[10:59] <gobbe> aah, sorry
[10:59] <gobbe> i didn
[10:59] <juniour> then wt?
[10:59] <gobbe> i didn't notice wubi
[10:59] <juniour> ya then
[11:00] <juniour> ther is wubu for 10.10
[11:00] <r00t4rd3d> yeah
[11:00] <juniour> gobbe  there is wubi for 10.10
[11:00] <r00t4rd3d> http://www.ubuntu.com/desktop/get-ubuntu/windows-installer
[11:00] <pavanai> how to change theme for cairo?
[11:01] <r00t4rd3d> will be fun when the date is 11/11/11 the world is going to blow up
[11:01] <skumara> when I connect my ipod touch 4G it is mounted as camera at gphoto2://[usb:002,005]/. I can't sync with rhytmbox nor mount it as a removable drive. Can anyone help me to sync ipod to ubuntu?
[11:02] <buntu> how do u add a user to the su group?
[11:03] <r00t4rd3d> add a new user
[11:03] <r00t4rd3d> under System , admin , users and groups
[11:04] <amfamf> I downloaded and installed ubuntu now and it's my first time using this os... I had a great time with my first day and it seems that I'm getting it. I can't find the programming language support though? any idea on this?
[11:04] <Dr_Willis> amfamf:  what language?
[11:04] <buntu> root4rd3d: terminal?
[11:04] <amfamf> c++,java
[11:04] <r00t4rd3d> no threw the desktop
[11:04] <Dr_Willis> you can install java and c++ files via the pacakge manager
[11:04] <Dr_Willis> !java | amfamf
[11:05] <juniour> gobberoot4rd3d that wubi for 10.04 i think wubi for 10.10 hvent release yet
[11:05] <amfamf> ok
[11:05] <amfamf> i thought you have to go to -sudo or something
[11:05] <juniour> root4rd3d that wubi for 10.04 i think wubi for 10.10  hvent release yet
[11:05] <r00t4rd3d> no juniour its for 1010
[11:05] <ccaggie05> For those long term users...has Ubuntu completely replaced Windows/Mac usage?
[11:05] <rethus> i've try to add ppa:xubuntu-team/ppa to repositories, but got an error
[11:05] <Gimbli> amfamf: For Java I would recommend eclipse. If you want to program in C++ I would choose the Qt Creator as an IDE
[11:05] <amfamf> so i have to go to the package manager
[11:05] <rethus> https://launchpad.net/~xubuntu-team/+archive/ppa
[11:05] <ccaggie05> I'm shocked by how practically every program I use in Vista has a replacement here
[11:05] <rethus> done like there describe: https://launchpad.net/~xubuntu-team/+archive/ppa
[11:05] <rethus> even didn't work with ubuntu
[11:06] <amfamf> so which is much better install the ide's packed with the compilers?
[11:06] <amfamf> like codeblocks and eclipse?
[11:06] <amfamf> or install it via package manager
[11:07] <Gimbli> amfamf: depends on your needs I guess. if you do not have any special recommendations you can install them via package manager
[11:07] <juniour> r00t4rd3d earlier i have tried it hasent work for 10.10
[11:07] <Gimbli> amfamf: s/recommendations/requirements/ ;)
[11:08] <juniour> r00t4rd3d when i run 10.10 through usb there is option for installing 10.10
[11:08] <amfamf> Gimbli: is that a directory which i can access through the terminal?
  funny microsoft never mentioned that..
[11:08] <juniour> r00t4rd3d and if i run that option there is option f install along side other os
[11:09] <amfamf> I am so noob
[11:09] <juniour> if i do this cani use boths 10.10 and 10.04
[11:09] <Gimbli> amfamf: what kind of directory do you mean? if you mean the package manager I would recommend the "GUI" way via synaptic
[11:09] <amfamf> hahahha not that
[11:09] <juniour> r00t4rd3d?
[11:09] <amfamf> the s/recommendations/requirements u say
[11:09] <amfamf> sori man
[11:09] <Gimbli> amfamf: no problem ;)
[11:10] <skumara> anyone know how to mount my ipod on /dev/ipod?  lsusb show this info http://pastebin.com/mGJCW26U please help?
[11:10] <juniour> r00t4rd3d?
[11:10] <Gimbli> amfamf: sorry, gotta be off now. perhaps someone else can guide you to install the IDEs you want :)
[11:10] <amfamf> guess i have to study more on linux commands and the architecture of it... I totally love this ubuntu
[11:10]  * KM0201 wakes up
[11:11] <UBUxUBU> juniour, i am usind wubi 0n 1004 right now
[11:11] <amfamf> Gimbli: I'll just google it...
[11:11] <Gimbli> amfamf: ah, it should not be that difficult. everything you need can be found in the repositories, I guess
[11:11] <krogers0001> is it true that hackers wrote linux?
[11:11] <juniour> UBXxUBX I AM USING SAME
[11:12] <juniour> UBXxUBX ug to my ques
[11:12] <amfamf> i'll be out now.. thanks guys
[11:12] <andismith> test
[11:12] <juniour> UBXxUBX have u tried wubi for 10.10
[11:13] <juniour> UBXxUBX
[11:13] <juniour> ?
[11:13] <andismith> hi is there a way to use the blackberry-gps-device (connected via usb to the notebook) fos gpsd?
[11:13] <UBUxUBU> preference...admin...disk util         for mounting stuff
[11:13] <andismith> cant find any information for this on the net
[11:13] <UBUxUBU> no i havent tried 1010 junior
[11:13] <juniour> K
[11:13] <krogers0001> is there any way to chat on irc through the terminal
[11:13] <krogers0001> ?
[11:14] <gobbe> krogers0001: yes, like irssi
[11:14] <krogers0001> thank you
[11:14] <juniour> krogers0001 ya
[11:14] <juniour> krogers0001 sudo apt-get install -y irssi
[11:14] <UBUxUBU> skumara, try preferences...administration...disk utility...
[11:14] <UBUxUBU> look in there
[11:15] <UBUxUBU> right now 10.04 is still the schidddt
[11:15] <Kevin`> how can I remove nvidia's glx
[11:15] <skumara> UBUxUBU, my ipod does not show up in disk utility as a portable disk.
[11:16] <skumara> UBUxUBU, fdisk -l does not have my ipod.
[11:16] <kevin_> sweet i'm chatting in terminal
[11:16] <UBUxUBU> WHAT BRAND
[11:16] <skumara> UBUxUBU, ipod touch 4G
[11:17] <kevin_> exit
[11:17] <UBUxUBU> no wonder
[11:17] <krogers0001> how do i boot directly into the command line?
[11:17] <UBUxUBU> ipod is a nono
[11:17] <UBUxUBU> gentoo
[11:18] <UBUxUBU> or arch
[11:18] <krogers0001> ubuxubu are you talking to me?
[11:18] <gjm> Hi. I need a C++ IDE. What is good?
[11:18] <skumara> UBUxUBU, u mean i have to use gentoo or arch linux?
[11:19] <Sriram> gjm: Have heard that anjuta is pretty nice
[11:20] <jcdusse> gjm: or code blocks
[11:20] <gjm> thanks
[11:20] <Sriram> gjm: Or just use vim with extensions :)
[11:20] <krogers0001> i'm using ubuntu 10.04 and i would like to boot into the command line can someone help?
[11:21] <gjm> Sriram: ;]
[11:21] <krogers0001> and thanks for telling about irssi i love it
[11:21] <Dr_Willis> krogers0001:  use the 'text' option at teh grub menu. edit the boot line. replace 'quiet splash' with 'text'
[11:21] <juniour>  krogers0001 while booting select command line
[11:21] <Dr_Willis> recovery mode = command line only i thought.
[11:21] <gjm> Sriram: and what about NetBeans?
[11:22] <ouyes> I have some data stored in my hard drive , that is very important to me, I do not want others to copy these data, is there a way to protect these data that anything copied from my hard drive would become trashes, no just encryption?
[11:22] <juniour>  krogers0001 recovery mode command line
[11:22] <Dr_Willis> ouyes:  not that ive ever seen.
[11:22] <krogers0001> juniour how do i go into recovery mode?
[11:23] <Dr_Willis> ouyes:  perhaps some of the fuse tools.. but o doubt if what you are asking is possible,.
[11:23] <wd4lko> ctrl+alt+1 gives you a terminal with the command line
[11:23] <ouyes> Dr_Willis, I think it is possible
[11:23] <Dr_Willis> krogers0001:  the grub menu normally has a  normal boot  option, and below that a 'recovery' option.
[11:23] <Aihetleos> guys the window border is not appear on the window and i dont know how to make ot appear. do you have any idea???
[11:23] <wd4lko> +F1 i meant
[11:23] <Dr_Willis> Aihetleos:  try alt-f2  then run 'metacity --replace'
[11:23] <juniour>  krogers0001 while booting u get option like generic below there is option for recovery or command line
[11:24] <juniour>  krogers0001 got it
[11:24] <krogers0001> ok
[11:24] <juniour> ?
[11:24] <krogers0001> yeah thanks
[11:24] <UBUxUBU> disable gdm, kdm, or xdm in you window manager of choice depending on your window manager of choicethen you when you boot up (or logout) you will be at the command line. Then to start your window manager (depending on which one) usually you can just type startx cheers
[11:24] <krogers0001> really appreciate it
 im pressing alt f2 but nothing appears
[11:25] <Dr_Willis> Aihetleos:  then gnome really crashed. can you open a terminal via the menus?
 yes
[11:25] <Dr_Willis> Aihetleos:  open a terminal then and try 'metacity --replace'  in it.
 use alter +f2
[11:25] <Dr_Willis> Aihetleos:  open a terminal then and try 'metacity --replace &'  in it.  if alt-f2 is not working
[11:26] <CyL> Happy New Year folks...
 i open terminal and it works
[11:26] <Dr_Willis> use the 'exit' command to close the terminal
[11:27] <juniour> hi
[11:28] <Ranjan> is their any alternative for Notification Area in gnome ?
[11:29] <Dr_Willis> Ranjan:  you mean to put the mail/volume icons somewhere else?
[11:29] <Dr_Willis> or you mean the OSD type messages?
[11:30] <pratz> hey guys can i recover my os with pen drive ??
[11:30] <Ranjan> Dr_Willis ::: mail/volume icons ...  osd is not an issue
[11:30] <Dr_Willis> pratz:  you can fix a lot of problems with a bootable flash drive. yes.
[11:30] <Dr_Willis> Ranjan:  what do you want to do with them? Some docks have  a way to 'hold' the icons also.
[11:30] <UBUxUBU> You might want to check out Tint2 at http://code.google.com/p/tint2/.
 puppy linux is good for that. It boots as root and allows you to access all your devices instantly.
 i went to the applications then to others and i press the metacity app then it work. Do you have any idea why it crashed?
[11:32] <Dr_Willis> Aihetleos:  if compiz, or metacity crashes, then you lose you window borders. most likely you were using compiz and that crashed. meticty does the same job and is a bit more stable. but not  as fancy effects.
[11:33] <Ranjan> Dr_Willis:: well I was looking out for thing that can reduce this space from panel cause I am using ubuntu on hp mini where work area is very limited ....
 ok thanks!!!
[11:34] <pratz> yesterday i started my laptop and i got an error for low graphics , i have no idea how to fix that
[11:34] <Dr_Willis> Ranjan:  i recall some alternative menu item for the panel that put the apps,places,system menus - into one pull down menu.
[11:34] <mina> salam canale iraniha kojas?
[11:35] <pratz> Dr_Willis: yesterday i started my laptop and i got an error for low graphics , i have no idea how to fix that
[11:35] <Dr_Willis> pratz:  whats your vdeo card?
[11:37] <valcom87> --help
[11:37] <Dr_Willis> !ask
[11:37] <Ranjan> Dr_Willis: I was going though with some article on internet in which they were talking about in the future versions of ubuntu their'll not be any notification area ...
[11:38] <Dr_Willis> Ranjan:  who can tell... they may change their mind 100 times.. in the next year.
[11:38] <p_res> Ranjan: I don't use one now. I've dumped it.
[11:38] <p_res> I use a tri-panel system but have no notificationsas it is.
[11:38] <Dr_Willis> I like panels and panel applets.. easy to undertand and customize. Now theres some weird anti-panel-status-bar disease going around..
[11:39] <Ranjan> Dr_Willis :: ha ha :)
[11:39] <Dr_Willis> at least we seem to be getting away from the 'desktop widgit'  obeseeion.
[11:40] <Ranjan> Dr_Willis: thanks .. and have an great time ahead ....
[11:40] <mina> I am Iranian.
[11:40] <rww> !ir
[11:40] <ccaggie05> I have a question for experienced users...is it possible to upgrade to a new version of Ubuntu (or another linux distro) without losing your Linux or Windows files?
[11:41] <Dr_Willis> ccaggie05:  Upgradeing is a feature of the pacakge manager. so yes its possible.
[11:41] <p_res> Dr_Willis: I'm not anti-panel. I have three of them! But I only have what's necessary on those panels.
[11:41] <gobbe> ccaggie05: yes it is
[11:41] <Dr_Willis> upgrading to a differnt disrto = not really a good idea.
[11:41] <Dr_Willis> upgradeing ubuntu - should not affect windows at all.
[11:42] <Ranjan> ccaggie05: but some times .. system fails to boot up after upgrade ... may be system can get broke
[11:42] <Dr_Willis> Keeping /home/ on its own partition. can make  life a lot easier.
[11:42] <Ranjan> ccaggie05: in your linux part
[11:43] <Dr_Willis> then you can do a clean reinstall. and not lose your users information/files.
[11:43] <ccaggie05> can you use the same /home partition with other distros?
[11:43] <Dr_Willis> ccaggie05:  you can. but need to be carefull.  sunce the order of the users added, and the uid's assigned to them. can cause issues.
[11:43] <Dr_Willis> ccaggie05:  use differnt usernames on each disrto would be a good idea.
[11:44] <ccaggie05> you mean usernames for the OS?
[11:44] <Dr_Willis> the names of the Users you add when you install.. yes.
[11:45] <Dr_Willis> if you install 2 differnt ubuntu variants (for example) you could get away with same users. IF you added them in teh same order.
[11:45] <matrix12> ciao
[11:45] <Dr_Willis> otehrwise user #1 files may show up as user #2's files if you added them in reverse order.
[11:45] <Dr_Willis> when you boot the other disrto.
[11:46] <pavanai> what is the command to install tiddlywiki?
[11:46] <ccaggie05> oh ok
[11:46] <Dr_Willis> user id's start at 1000 in ubuntu. If you add 10 users. they will be 1001, and so on up to 1010. If you do it in a differnt order. then theuir uid's will differ.
[11:46] <ccaggie05> thanks for that tip
[11:46] <Dr_Willis> pavanai:  you just download the file and put it in a directory. theres no install to it.
[11:46] <Dr_Willis> pavanai:  its a stand alone wiki-in-a-html-file
[11:47] <ccaggie05> I'm liking Ubuntu...but with so many options out there it's tough not to want to try them out...
[11:47] <pavanai> Dr_Willis that site aint working
[11:47] <Dr_Willis> pavanai:  theres otehr tiddlywiki sites out with  enhanced versions.  theres also the #tiddlywiki channel i recall
[11:48] <Dr_Willis> pavanai:  in theory you can save any tidlywiki web site/page to a file. and have the whole site downloaded, you could then edit as you want.
[11:49] <p_res> ccaggie05: That's why we have Live CD's.
[11:49] <shaggy2> is anyone here got expirence with AWStats issues?
[11:49] <KM0201> ccaggie05: if your PC is powerful enough... use virtualbox to try new distros... i do that a lot
[11:50] <Dr_Willis> pavanai:  this site is working it seems -> has a download button --> http://tiddlywiki.com/#GettingStarted
[11:50] <shaggy2> I have an issue with AWSTATS
[11:51] <shaggy2> issue is: Error: SiteDomain parameter not defined in your config/domain file. You must edit it for using this version of AWStats.
[11:52] <shaggy2> I have ubuntu 10.10 Apache2 AWStats is isntalled and setup for a multiple vhosts is there anyway I can tell awstats what config file it needs to look for for a certain domain
[11:52] <gnugr> hi everyne and happy New Year, ! reinstalled 10.04 distro but i lost permisions for /home how gan i get permisions back, what is terminal command to fix it?
[11:53] <gnugr> sorry for my typping
[11:53] <Dr_Willis> gnugr:  chown it to the user you want to accesss their /home/username
[11:53] <gnugr> lots mistakes
[11:53] <Dr_Willis> gnugr:  check permissions of /home/* the users dir IN home. and of /home/ itself
[11:54] <Dr_Willis> ls -ld /home
[11:54] <Dr_Willis> drwxr-xr-x 4 root root 4096 2010-10-16 06:31 /home
[11:54] <shaggy2> is anyone able to help with my issue?
[11:54] <Dr_Willis> gnugr:  and - should be like ->   ls -ld /home/willis
[11:55] <Dr_Willis> drwxr-xr-x 93 willis willis 12288 2011-01-01 06:51 /home/willis
[11:55] <huazai> hello
[11:55] <gnugr> ok ty
[11:55] <royale1223> Dr_Willis, WHY AM I GETTING AN ERROR WHEN TRYING TO COPY CONTACTS FROM EVOLUTION?
[11:55] <huazai> who are  you?
[11:55] <rethus> have installed ubuntu-desktop xubuntu-desktop and lubuntu-desktop. Than i removed ubuntu-desktop... but in the loginscreen of xubuntu i still have all the sessions from ubuntu choosable.
[11:55] <Dr_Willis> royale1223:  no idea. I never use evolution.
[11:55] <rethus> how can i remove them
[11:55] <Dr_Willis> !support | huazai
[11:55] <rethus> royale1223:  no shouting here!
[11:56] <royale1223> Anybody here familer with evolution?
[11:56] <Dr_Willis> rethus:  they are defined by various .desktop files.
[11:56] <rethus> Dr_Willis: where are these file slocated?
[11:56] <Dr_Willis>  rethus  'locate gnome.desktop' tells me they are in...
[11:56] <Dr_Willis> /usr/share/xsessions/gnome.desktop
[11:56] <shaggy2> I have ubuntu 10.10 Apache2 AWStats is isntalled and setup for a multiple vhosts is there anyway I can tell awstats what config file it needs to look for for a certain domain I get this error when I navigate to www.mydomain.net/awstats/awstats.pl
[11:57] <Ranjan> Thanks every body ... It's an great time today... I wish all the users an great , Happy and prosperous new year 2011... have an great time ahead ..:)
[11:57] <bt> installed ubuntu on a samsung q310, fn for sound works fine, whenever i touch anything regarding screen brightness the brightness tooltip goes in a loop and system freezes, any idea how to approach?
[11:58] <rethus> Dr_Willis: thanks, thats what i'm searching fore
[11:58] <rethus> -e
[12:01] <gnugr> still no permisions on /home
[12:01] <Dr_Willis> gnugr:  what are the current permissions on /home/ ?
[12:01] <gnugr> as root
[12:01] <gnugr> not as user
[12:01] <Dr_Willis> and your users dir in home?
[12:02] <`marianne`> hey, is there any way to install the hypercube screensaver? it's usually part of xscreensaver, but it's not in xscreensaver's list
[12:02] <Dr_Willis> `marianne`:  i think theres some glscreensavers in teh package listings you can install
[12:02] <shaggy2> gnugr type ls -la in the root dir
[12:02] <Dr_Willis> ls -ld /home
[12:03] <`marianne`> Dr_Willis, i already installed those, and hypercube doesn't use opengl
[12:03] <`marianne`> it's just lines, no fancy textures or anything
[12:03] <Dr_Willis> `marianne`:  no idea then - i dont mess with screensavers much.
[12:04] <Dr_Willis> may be in some other xscreensavers pavkage.
[12:04] <shaggy2> if need be you can type sudo su then input your sudo users password then you'll be logged in as root, and you can then change chown on any directory
[12:04] <`marianne`> i miss hypercube :( lol
[12:04] <shaggy2> gnugr: if need be you can type sudo su then input your sudo users password then you'll be logged in as root, and you can then change chown on any directory
[12:04] <Dr_Willis>  /home seems to be mode '755' here
[12:05] <Dr_Willis> its better to use 'sudo -i' not 'sudo su'
[12:05] <alex_under> hi
[12:05] <Dr_Willis> http://ubuntu-tutorials.com/2008/05/09/a-root-shell-on-ubuntu-the-right-way/
[12:05] <alex_under> I made a iptables nat
[12:05] <alex_under> and on the client PC
[12:06] <alex_under> I can't access some websites
[12:06] <alex_under> like Facebook
[12:06] <alex_under> can some one tell me why ? :|
[12:06] <john> i am putting ubuntu on my laptop and when i get to the point were it says preparing to install the courser starts spining and it just has been siting that way for over an hour any ideas
[12:06] <gnugr> most dirs in /home are www-data mode
[12:06] <`marianne`> i think i just found a bug? the package xscreensaver-data-extra describes itself as having hypercube but it does not
[12:07] <Dr_Willis> gnugr:  you may want to pastebin the output of 'ls -l /home'
[12:07] <gnugr> ok hang on
[12:07] <Dr_Willis> gnugr:  each user has their own dir in /home/ that should be owned by that specific user.
[12:08] <Dr_Willis> and seems to have a mode of '755' here.
[12:09] <Gryllida> locate: fatal error: Could not find user database '/var/lib/slocate/slocate.db':  No such file or directory
[12:09] <Dr_Willis> Gryllida:  try 'sudo updatedb' ?
[12:10] <Gryllida> updatedb: fatal error: load_file: Could not open file: /etc/updatedb.conf: No such file or directory
[12:11] <pomka> hi all
[12:11] <gnugr> http://paste.ubuntu.com/549247/
[12:11] <pomka> Есть русские?
[12:11] <Gryllida> !ru | pomka
[12:13] <Dr_Willis> Gryllida:  weird. seems that locate dident properly install.
[12:14] <alex_under> noone can help me ?
[12:14] <Dr_Willis> !find updatedb.conf
[12:14] <Dr_Willis> alex_under:  thats a bit of a complex task. i havent used nat in years. so not sure what to say.
[12:14] <Dr_Willis> alex_under:  could be some other firewall rules causing issues.
[12:15] <gnugr> Dr_Willis: did you see my pastebin?
[12:16] <alex_under> I see
[12:16] <alex_under> Dr_Willis thanks
[12:16] <john> ok i already have ubuntu on my laptop and when i go to load it up it says ubuntu, with linux 2.6.35-23- generic-pae and when i click it, it goes to a bios type black screen with the word initramfs please some one help me
[12:17] <Dr_Willis> gnugr:  files IN your users home dir. shoudl proberly be owned  by your user - not www-data
[12:18] <gnugr> is this command correct: chown vangelis:vangelis /home -R *
[12:18] <Dr_Willis> gnugr:   so you would want to do somthing like 'sudo chown   vangelis:vangelis    /home/vangelis/*'
[12:18] <john> i tryed to reinstall but it wont reinstall with the disk what should i do please help
[12:18] <Dr_Willis> yea the -R would be recursive.. like you said..
[12:18] <Dr_Willis> gnugr:  you ARE confuseing /home/ with /home/vangelis
[12:19] <Dr_Willis> gnugr:  the 2 are Radically different. :)
[12:19] <gnugr> ok
[12:19] <Dr_Willis>  /home/vangelis is also known as ~ or your users 'home' not the same as /home/
[12:20] <john> please i cant figuer this out
[12:20] <daniel_cynthiak> hi
[12:20] <john> hi
[12:20] <daniel_cynthiak> can someone please help?
[12:21] <CyL> !help daniel_cynthiak
[12:21] <daniel_cynthiak> female preferred
[12:21] <Dr_Willis> john:  try a non pae kernel perhaps? those can have issues with some hardware
[12:21] <CyL> !ask | daniel_cynthiak
[12:21] <gnugr> okay done thnks alot, Happy New Year
[12:22] <CyL> !detail | john
[12:22] <daniel_cynthiak> any females to help with my?
[12:22] <john> ok this will sound stupid but i dont understand
[12:22] <CyL> !details | john
[12:22] <buntu> hi! i have an issue. My /home is running out of disk space, i added an extra HD, but what's the method to move home to new HD?
[12:23] <Dr_Willis> john:  the 'pae' kernel is a 32bit kernel with extras to allow access of over 4gb of ram. Its  can have issues with some hardware.
[12:23] <Dr_Willis> john:  that wouldent explain why you cant boot the cd again and reinstall however.
[12:23] <daniel_cynthiak> ???
[12:23] <Dr_Willis> daniel_cynthiak:  you have not asked an actual question that ive seen.
[12:23] <buntu> hi John
[12:23] <CyL> buntu: partition the new hd, format it, copy files, remount the new hd as your home (optinionally wipe your old home so that you can save some space after being sure everything is fine with the new home)
[12:24] <Dr_Willis> !movehome
[12:24] <buntu> Cyl: great, will figure out
[12:24] <john> the boot cd goes to the preparing to install and just sits there
[12:24] <Dr_Willis> theres some move home factoid. but i cant rember it.
[12:24]  * bonjoyee Wishes a Happy New Year:)
[12:25] <daniel_cynthiak> how do i re do my whole ascend m860 after formatting it?
[12:25] <CyL> Dr_Willis: People can't blame you for not having a RAM instead ofa human brain ;)
[12:25] <sresu_> I'm not able to start cron daemon. <sudo cron> gives -  cron: can't lock /var/run/crond.pid, otherpid may be 1067: Resource temporarily unavailable. But  <ps aux | grep crond> gives
[12:25] <sresu_> hsr      11772  0.0  0.0   4008   764 pts/1    S+   17:55   0:00 grep --color=auto crond
[12:25] <rumpe1> buntu, or you choose the easy way and just mount your new HD into your home as a directory, where you can store your additional stuff
[12:25] <buntu> john: try other install options on menu? or try a memtest?
[12:26] <CyL> daniel_cynthiak: why would you prefer a female to answer this quetsion?
[12:26] <Dr_Willis> daniel_cynthiak:  and whats an ascent m860 exactly?
[12:26] <kevin_> quit
[12:26] <buntu> rumpe1: that sounds like what im after
[12:26] <john> right now im on a black screen with the word initramfs
[12:26] <daniel_cynthiak> an huaWEI ascend m860
[12:27] <rumpe1> buntu, i prefer not to mount every partition available, when i only need them seldom ... and you save some effort, when the partitions are checked at bootup
[12:27] <Dr_Willis> daniel_cynthiak:  and that answer does not really tell us much new infomation.
[12:27] <buntu> rumpe1: so what happens to my old /home? i dnt have much in old home. just curious
[12:27] <sresu_> How do I start cron daemon? The time schedule server "cron(d)" does not seem to be running.
[12:27] <daniel_cynthiak> why  Cyl u a female? :0)
[12:28] <john> ok im am running memtest
[12:28] <CyL> buntu: if you mount your mount your new home without moving it before, the old files become unacessible..
[12:28] <rumpe1> buntu, nothing... just create /home/user/newstorage -directory and create an fstab entry (e.g. without auto-option) ... then you can mount via nautilus, if you need it by clicking
[12:28] <Dr_Willis> buntu:  you could move the current /home to /oldhome, and make a new /home/ that points to the new filesystem
[12:28] <CyL> daniel_cynthiak: If I am?
[12:28] <buntu> what is ubuntu 10 system requirement?
[12:29] <daniel_cynthiak> r u flirting with me cyl?
[12:29] <buntu> google
[12:29] <CyL> !offtopic | daniel_cynthiak
[12:29] <daniel_cynthiak> i know sorry just waking up
[12:30] <buntu> john: also note the system requirement of ubuntu 10 https://help.ubuntu.com/community/Installation/SystemRequirements
[12:30] <rumpe1> buntu, but if your old /home is on the same partiton as /, i would recommend moving your home to the separate partition
[12:30] <buntu> rumpe1: ok
[12:30] <john> ive been running it for about two weeks or more now and the prob just started today
[12:31] <buntu> ic
[12:31] <daniel_cynthiak> my huawei m860 was formatted but i can't figure out how to put an O.S. back on it
[12:32] <buntu> what's your boot medium? cd/dvd/usb?
[12:32] <buntu> @john
[12:32] <Dr_Willis> Pop in a cd.. boot it up.. insdtall... daniel_cynthiak
[12:32] <Dr_Willis> or boot from flash drive.
[12:32] <john> dvd
[12:33] <daniel_cynthiak> it is a smartphone no cd drive
[12:33] <DiagonalArg> Ignore - New at this, just trying to figure out who I am ... :)
[12:33] <Dr_Willis> daniel_cynthiak:   I imagine you will need to be doing some googling soon on that then.
[12:34] <sresu_> !info gadmin-rsync
[12:34] <buntu> Ok, can we help John here> i think the problem is beyond my linux/ubuntu understanding
[12:34] <shaggy2> I have ubuntu 10.10 server with Apache2, I have installed and configured awstats for use on multiple domains, how ever I get th error "Error: SiteDomain parameter not defined in your config/domain file. You must edit it for using this version of AWStats." when I navigate to www.mydomain.net/awstats/awstats.pl, Can anyone assist me with this error? I have googled the error and found no reference
[12:34] <shaggy2> to this error
[12:34] <FloodBot4> shaggy2: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[12:35] <daniel_cynthiak> why u can't help me?
[12:35] <shaggy2> eh say what I didn't flood :S
[12:35] <sacarlson> anyone get pptpd working in ubuntu10.10? I get GRE: Bad checksum from pppd , seen in my host /syslog  and fails to connect on my client side
[12:35] <Dr_Willis> daniel_cynthiak:  i doubt if anyone in this channel has managed to format their cellphone, or installed ubuntu onto one.
[12:35] <bartek> hi
[12:36] <john> any ideas please
[12:36] <buntu> @john.... is this scenario correct. Running Ubuntu for 2 weeks, now the system crashed and trying to reinstall but freezes after few lines
[12:36] <Dr_Willis> john:  the live cd still boots up and works fine?
[12:37] <john> ya pretty much @ buntu
[12:37] <Dr_Willis> Hmm.. live cd does not work. any more.
[12:37] <Dr_Willis> no other hardware changes?
[12:37] <buntu> john: k do what a Dr_Willis suggested
[12:37] <Jaaccs> HI every one
[12:37] <john> yes i just used it to install on desktop
[12:37] <shaggy2> john: maybe HDD failed, might have dead sectors, might have simply died, do you hvae another HDD you can install to??
[12:38] <john> worked fine just not on laptop
[12:39] <buntu> john: do a hd check to confirm
[12:39] <john> maybe hdd it would be the second one on this laptop had older version no it befor
[12:39] <Dr_Willis> if you have a spare flash drive. you may want to try making a bootable flash drive and see if the laptop boots from that.
[12:39] <rooks> can i use few crontab commands in one line?  like → cp /a /b; rm /a; mkdir /a
[12:39] <john> well it will do the tial no prop
[12:39] <Dr_Willis> rooks:  try it and see.. but i dont recall ever seeing that done. You may want to vall them from a simple script.
[12:40] <john> just wont install
[12:40] <rooks> Dr_Willis, yeah, thought the same,, but im lazy :P
[12:40] <Dr_Willis> john:  so ubuntu was working on the laptop however.. installed from that cd befor?
[12:40] <john> yes
[12:41] <Dr_Willis> john:  are there any other kernel entries on that machine in the grub menu? one thats not a 'pae' kernel?
[12:41] <Dr_Willis> hit shift at boot time to see th full grub menu.
[12:41] <shaggy2> I have ubuntu 10.10 server with Apache2, I have installed and configured awstats for use on multiple domains, how ever I get th error "Error: SiteDomain parameter not defined in your config/domain file. You must edit it for using this version of AWStats." when I navigate to www.mydomain.net/awstats/awstats.pl, Can anyone assist me with this error? I have googled the error and found no reference
[12:41] <shaggy2> to this error
[12:41] <FloodBot4> shaggy2: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[12:41] <Jaacs> which version should I install on my laptop the netbook version or the desktop version
[12:41] <Dr_Willis> Jaacs:  i woudl say go wih the desktop version.
[12:42] <Jaacs> Willis can u please help me understand both versions
[12:42] <Dr_Willis> shaggy2:  theres #ubuntu-server also
[12:42] <Dr_Willis> Jaacs:  differance is the default desktop interface.
[12:42] <CyL> Jaacs: They differ primarily on the appearance, but I'd also go with the desktop
[12:42] <john> idk i dont know a hole lot about it
[12:42] <shaggy2> ok thank you DR_Willis
[12:43] <Jaacs> coz with the 10.4 that I have currently installed does not detect my webcam
[12:43] <john> how would i cheak
[12:43] <Jaacs> is that coz of the desktop thing?
[12:43] <Dr_Willis> john:  when the laptop boots up. you see a list of items.. ubuntu , then ubuntu (recovery), and how may other items? if theres more then those 2. try some farther down the list. see if any of those work. Look for one that does NOT have 'pae' mentioned in its name.
[12:43] <Dr_Willis> Jaacs:  webcam support would be the same in mosta ll ubuntu variants./
[12:44] <Dr_Willis> Jaacs:  10.10 may have support for more cals.
[12:44] <Dr_Willis> cams.
[12:44] <Dr_Willis> Jaacs:  how are you testing the webcam? did you try it in cheese?
[12:44] <CyL> Jaacs: harware compatibility would not change.. the netbook version albeit being more tailored to small screen lappys is not so efficient as the desktop version, even with a small screen IMHO (maybe with a touch screen this is different...)
[12:45] <john> ok there isnt one that does not have that accept memtest
[12:45] <angelo> ciaooooooooooooo e buon anno a tutti
[12:45] <Dr_Willis> john:  i have to wonder how pae kernels got installed onyour laptop. How much ram does it have?
[12:45] <john> 4g
[12:45] <rumpe1> Jaacs, the difference is not so big, you can always switch from one to another without big effort.
[12:46] <Dr_Willis> john:  so the pae kernel isent gaining you anything anyway.
[12:46] <chefBaggins> Happy new Year Ubuntu users!
[12:46] <Dr_Willis> john:  so you just have 3 entries on the grub menu? ubuntu , ubuntu (recovery) and memtest ?
[12:46] <john> no 6
[12:47] <LittleCj3k> exit
[12:49] <john> ubuntu, with linux 2.6.35-23-generic-pae times 2 and 2 with recovery and memtest (memtest86
[12:50] <john> +  ) and memtest (serial console 115200
[12:50] <Dr_Willis> pay attention to the last #  the -23  - one of those shold be different. I would try the other linux ones. and see if any of them, work.
[12:50] <Scottzor> I installed ubuntu server edition on my pc I'm dedicating as a samba server today, in the installation it asks me what type of server I wanted it to be and what I wanted to install, I selecting Samba yet I can't find it in my server?
[12:50] <john> ok ya ther is a -22
[12:50] <Dr_Willis> Scottzor:  try installing it by hand.. 'sudo apt-get install samba' and see if it installs
[12:51] <Dr_Willis> Scottzor:  you would still need to configure your samba shares.
[12:51] <john> no black screen with a lot of stff on it and at the bottom (initramfs)
[12:51] <llutz_> hi, happy new year
[12:51] <Scottzor> Ok
[12:51] <wyclif> llutz: happy new year, hello
[12:52] <wtz> hi
[12:52] <john> stff=stuff
[12:53] <toiletduck> was wondering if anyone here has any knowledge of WUBI???
[12:53] <Dr_Willis> toiletduck:  ive seen enough people with problems with it in here.. to suggest not using it.
[12:54] <wyclif> toiletduck: there's probably some ppl in here that do the wubi
[12:54] <wyclif> toiletduck: installing?
[12:54] <usr13> !WUBI | toiletduck
[12:54] <ChefBaggins> toiletduck, forgett about it... It's a nightmare...
[12:54] <toiletduck> ive used it before
[12:54] <Scottzor> I installed manually, now where do I go to configure it?
[12:55] <toiletduck> but i had to format my hard drive and now my system asks if i want to boot win or ubuntu at start up even though ubuntu is no longer on my system
[12:55] <sresu_> How do I start crond daemon??
[12:55] <toiletduck> and thats the part im trying to fix
[12:55] <wyclif> toiletduck: is there some reason you don't want to install the normal way?
[12:55] <usr13> toiletduck: Notice the "Please file bugs at..." part
[12:55] <toiletduck> wyclif i dont want to install at all
[12:56] <toiletduck> usr13 its not a bug though, its something im trying to fix on my netbook
[12:56] <usr13> sresu_: Should already be installed.
[12:56] <toiletduck> was just wondering if anyone else here knew about it
[12:56] <sresu_> usr13: Yes, it is. Im asking about starting it
[12:56] <usr13> sresu_: See crontab -i
[12:56] <Scottzor> ?
[12:57] <wyclif> toiletduck: are you going to set up dual boot?
[12:57] <sresu_> usr13: crontab: usage error: file name must be specified for replace
[12:57] <usr13> sresu_: Correction:  crontab -l   (not -i)
[12:57] <wyclif> toiletduck: why not just reformat with Ubuntu and install it w/o wubi?
[12:58] <sresu_> usr13: No crontab for user. Don't you know about the change that crontab is been made system wide?
[12:58] <toiletduck> wyclif: i dont want to install ubuntu
[12:58] <wyclif> toiletduck: OK
[12:58] <davids9d0f> I want to mount /dev/sdb1 to /mnt/coolfolder, but coolfolder doesn't exist. Is there a parameter I can use that creates the folder automatically and deletes it when I call umount?
[12:58] <toiletduck> when i turn my netbook on it asks me if i want to boot window 7 or ubuntu
[12:58] <toiletduck> the problem being is that Ubuntu is not installed!
[12:58] <sresu_> usr13: cat /etc/crontab
[12:58] <usr13> sresu_: Oh, no, I guess not.
[12:58] <Linux_Galore> toiletduck: thats normal
[12:58] <toiletduck> and rebuilding the boot manager in windows doesnt work
[12:58] <Linux_Galore> toiletduck: you are confusing two different things
[12:58] <wyclif> toiletduck: you want to get rid of the Ubuntu boot option
[12:59] <john> @ dr_willis should i just make another disk and see if it works
[12:59] <Linux_Galore> toiletduck: what you are seeing is grub, it is a boot manager
[12:59] <toiletduck> yes wyclif
[13:00] <usr13> davids9d0f: If you want to create a special mount point of your own, you will have to do it yourself.
[13:00] <sresu_> usr13: It says - /etc/crontab: system-wide crontab Unlike any other crontab you don't have to run the `crontab' command to install the new version when you edit this file and files in /etc/cron.d. These files also have username fields, that none of the other crontabs do.
[13:00] <toiletduck> I know its grub Linux_Galore, but being that i only have ONE Operating system on my netbook, i dont want to see it.
[13:00] <wyclif> toiletduck: listen to what Linux_Galore is saying. I think it's just a matter of editing your grub2 config file
[13:00] <Linux_Galore> toiletduck: basically you need to remove grub from the mbr and install the default windows mbr
[13:00] <usr13> sresu_: You can't just do   crontab -e  ?
[13:00] <sresu_> usr13: I just want to start it
[13:01] <toiletduck> how would i do that Linux_Galore?
[13:01] <wyclif> Linux_Galore: yep, bingo
[13:01] <toiletduck> cos if i boot into the are of windows to fix the mbr through command line, it doesnt change anything.
[13:01] <usr13> sresu_: I do not think  you need to start it.
[13:01] <Linux_Galore> toiletduck: never done it myself, need to use a windows partition management tool
[13:01] <geirha> sresu_: It's already started, unless you specifically stopped it.
[13:01] <Linux_Galore> toiletduck: windows itself wont do it
[13:01] <toiletduck> so what should i google for exactly?
[13:02] <Linux_Galore> toiletduck: remove ubuntu grub windows mbr
[13:02] <sresu_> usr13:geirha: Well, then why it isn't running scripts which I've added?
[13:02] <geirha> sresu_: ''service cron status''
[13:02] <geirha> sresu_: Most likely your script fails for some reason.
[13:02] <usr13> sresu_: Maybe there is an error in the script?  Show us.  Pastebin the output of crontab -l
[13:03] <usr13> sresu_: Have you tested them?
[13:03] <sresu_> geirha: Yeah, its running - cron start/running, process 1067 Same what ps aux | grep cron gives
[13:03] <litel> Hello, i would like to know if it is possible to reinstall linux completly without live cd or usb ? (sorry for the rotten english btw )
[13:03] <sresu_> usr13: One moment
[13:03] <wyclif> toiletduck: boot from your Windows CD if you have one, and enter console mode
[13:03] <wlodek> hey
[13:03] <wyclif> toiletduck: Recovery Console, when it asks if you want to boot Windows or not
[13:04] <Linux_Galore> litel: yes, depends on your bios but you can do a network install
[13:04] <geirha> sresu_: If you install the bsd-mailx package, cron should mail you with the output of the script.
[13:04] <toiletduck> netbook doesnt have cd drive, but it does have recovery built in
[13:04] <wyclif> toiletduck: Press "R" when it asks you whether you wanna install Windows
[13:04] <litel> Linux_Galore: Yes I can but how does it works ?
[13:04] <toiletduck> so will try through that.
[13:04] <geirha> sresu_: You can read those mails by running the mail command.
[13:05] <SC-M> how to connect to IRC server by telnet?
[13:05] <wyclif> toiletduck: when you get to the console, if you enter "fixmbr" it will delete GRUB and then yu should be able to boot Win
[13:05] <Linux_Galore> litel: basically you have a boot image file on a ftp server and you point your bios at it
[13:05] <toiletduck> wyclif ive tried that before many times
[13:05] <toiletduck> and it doesnt fix it.
[13:05] <toiletduck> still comes up with grub when i boot
[13:05] <wyclif> toiletduck: but you have built-in recovery, right? on the netbook?
[13:05] <litel> Linux_Galore: oh i see and is it possible do to do from the hdd ?
[13:06] <Linux_Galore> litel: its how old unix servers used to work, no floppies etc, just grab a boot image of a central server
[13:06]  * SC-M shalat dolo
[13:06] <sresu_> usr13: geirha: Yes I tested that last script - gadmin one, its running. cat /etc/crontab - http://pastebin.com/H0uyaEM4
[13:07] <geirha> sresu_: You want it to run every minute from 4 am to 5 am?
[13:07] <toiletduck> ok i googled it
[13:07] <toiletduck> and did what someone said to do
[13:07] <acerB> hey people
[13:07] <toiletduck> but it doesnt remove the option of what to boot to on start up
[13:07] <acerB> just a quick question
[13:07] <sresu_> geirha: That was just set as parameter to see if it atleat works. I would change it if it works
[13:07] <toiletduck> its still asking about ubuntu or win 7
[13:07] <wyclif> toiletduck: can you access a DOS prompt?
[13:08] <john> hey linux galore you sound like u can help me i cant get ubuntu to install on my laptop well reinstall when ever i boot up the cop it goes to the grub menu and nothing works if u go up u can see the rest of what i have been talking about
[13:08] <toiletduck> i did it through dos
[13:08] <toiletduck> fixmbr doesnt fix it
[13:08] <sresu_> geirha: I don't find any mistake in the script nor in crontab. Is it?
[13:08] <Linux_Galore> toiletduck: means the mbr hasnt been reoplaced
[13:08] <acerB>  how do i read or mount .bin images in ubuntu?
[13:08] <geirha> sresu_: Well, either install the bsd-mailx package, or put at the end of the command:    >/tmp/output 2>&1
[13:08] <toiletduck> well Linux_Galore what else would you suggest?
[13:08] <geirha> sresu_: Then look at /tmp/output to see what's wrong.
[13:08] <Jacs512> Hi Team how can I acces this chat using empathy? can anyone guide me
[13:09] <wyclif> toiletduck: have you tried running fdisk/ MBR?
[13:09] <sresu_> geirha: I don't want mail of the ouput.
[13:09] <sresu_> geirha: Hold on
[13:09] <Linux_Galore> toiletduck: usually I replace the mbr from within linux'
[13:09] <litel> Linux_Galore: ok ok thx
[13:09] <toiletduck> do i type fdisk/ mbr into the command?
[13:09] <Linux_Galore> toiletduck: no'
[13:10] <sresu_> geirha: The file/folder /tmp/output doesn't exist
[13:10] <Jacs512> Hi Team how can I acces this chat using empathy? can anyone guide me
[13:10] <wyclif> toiletduck: you'd need to use a boot disk for that, but I forgot you already said this is a netbook =(
[13:10] <geirha> sresu_: * * * * * root /etc/gadmin-rsync/scripts/gadmin-rsync-Ubuntu.sh >/tmp/output 2>&1
[13:10] <bonjoyee> Jacs512: just add your freenode acc to empathy..then "join room"
[13:10] <sresu_> geirha: Oh sorry. Where do you want me to add it
[13:10] <sresu_> Gotcha
[13:11] <geirha> sresu_: Then wait a couple of minutes for cron to detect the new job and run it.
[13:11] <Jacruth> hi guys, may I ask something?
[13:11] <rumpe1> !ask | Jacruth
[13:11] <sresu_> geirha: You want me to add the line you suggested?
[13:11] <toiletduck> yeah but wyclif the netbook has the recovery built into. so i can format and reinstall and stuff like that.
[13:11] <geirha> sresu_: Yes, for testing.
[13:11] <wyclif> toiletduck: there is another way
[13:11] <bonjoyee> Jacs512: also make sure "telepathy-idle" is installed
[13:11] <sresu_> geirha:  * * * * * root /etc/gadmin-rsync/scripts/gadmin-rsync-Ubuntu.sh >/tmp/output 2>&1? Instead of the old ones? There is no time set for it all *
[13:12] <toiletduck> wyclif can you pm me? its so confusing in this channel
[13:12] <wyclif> toiletduck: you can still use GRUB to boot Windows by telling it to load your NTLoader
[13:12] <Linux_Galore> toiletduck: http://ubuntuforums.org/showthread.php?t=1381658
[13:12] <Jacruth> I have installed playonlinux, however it is not in the Gnome Menu. I have wine installed too and I have tried to modify the menu.
[13:12] <kevin_> does anyone know where to get really good ubuntu wallpapers?
[13:12] <Linux_Galore> kevin_:  gnome or kde
[13:12] <kevin_> ok thanks
[13:13] <Linux_Galore> ??
[13:13] <Linux_Galore> lol left without answering
[13:13] <Jacruth> xd
[13:13] <toiletduck> Linux_Galore I will try that out now and let you know. thanks for the link
[13:13] <sresu_> geirha: I added that line at the end of all the lines. Waiting for it to detect
[13:14] <Jacruth> guys, I have installed PlayOnlinux, however it is not in the Gnome Menu. I have wine installed too and I have tried to modify the menu.
[13:14] <john> ok can any one in here help me i need this laptop to work
[13:14] <Jacruth> well, anyway, do you know how I could install Spore with wine? :3
[13:14] <usr13> john: What is your problem?
[13:15] <Linux_Galore> Jacruth: thats a book answer, as in we have to write a book to answer the question
[13:15] <Jacruth> really?
[13:15] <geirha> sresu_: Most likely it's unable to find one or more command because cron has a different PATH env.
[13:15]  * SC-M is back
[13:16] <Dr_Willis> with cron - you normally want to give the full path to a command. dont rely on the default PATH.
[13:16] <Linux_Galore> Jacruth: wine can be pretty involved, needs a bit of reading
[13:16] <gsal> hello guys, I have one of the common problems on boot, for some reason, my old ubuntu desktop failed to start, http://pastebin.ca/index.php  please could anyone help
[13:16] <geirha> sresu_: I have to go, hope you figure it out.
[13:16] <john> ok i have a dell insperon and i have ubuntu 10 .10 on it and i went to boot it up and it went to the grub menu and nothing works and now i am trying to reinstall but it get to the preparing to install and it just sits there and wont move forward
[13:16] <sresu_> geirha: Well, different path as in>
[13:16] <sresu_> ?
[13:17] <john> @uar13
[13:17] <Dr_Willis> john:  when it hangs, go to the console. (alt-ctrl-f1) and look for error messages, and check the output of the 'dmesg' command
[13:17] <sresu_> geirha: Ah.. no, I don't think I would be able to.. I tried to do that early this morning. Then though of asking here
[13:17] <Linux_Galore> gsal, we need the link to the file not to the site
[13:18] <sresu_> geirha: Well, thanks anyways. Well just what is the different path you are saying
[13:18] <Dr_Willis> john:  i would also try redownloading the iso file on a machine that works. and makeing a bootable flash drive to try to install from.
[13:18] <gsal> Linux_Galore, oh sorry, http://pastebin.ca/2035688
[13:19] <john> ok i will try that and come back
[13:19] <Dr_Willis> sresu_: ?
[13:19] <wyclif> john: or burn the iso to a CD or something. Sometimes those ISOs get corrupted, you never know
[13:19] <artur> witajcie jestem artur i właśnie sprawdzam nowy system linux
[13:20] <toiletduck> Linux_Galore: that link you sent me, it worked, so thank you!
[13:20] <rumpe1> gsal, check the uuid-entry for / in your fstab via liveCD
[13:20] <john> ok thanks guy im going to try it
[13:20] <crawler> !pl | artur
[13:20] <Linux_Galore> toiletduck: no worries
[13:21] <artur> a jak zmienić ten kanał
[13:21] <Linux_Galore> gsal: doesnt look good
[13:21] <john> ok one more question what is the diff in 32 and 64 bit
[13:21] <gsal> rumpe1, I mounted the system via live cd, the same uuid
[13:22] <crawler> artur: /join #ubuntu-pl
[13:22] <Linux_Galore> gsal: can you boot into safe mode,  hold shift down when ubuntu boots right after grub
[13:22] <rumpe1> gsal, same as the output of "blkid"?
[13:22] <wyclif> john: 64-bit handles RAM more effectively than 32
[13:23] <gsal> Linux_Galore, I didn't get it, u mean recovery mode, the second grub option?
[13:23] <Linux_Galore> john: basically 64 bit and 32 bit are like how many lanes there are on a highway, more lanes and you can access more data
[13:23] <gsal> rumpe1, sorry, what is "blkid" ?
[13:23] <john> so if i have 4 g of ram go 64 or just keep 32
[13:24] <rumpe1> gsal, command-line tool to check the uuids of partitions
[13:24] <Linux_Galore> john: 4G is fine
[13:24] <Linux_Galore> john: for 64 bit
[13:25] <wyclif> john: 64 bit machines are most frequently used for software development, scientific apps, schools, &c...a bit of overkill for a home user
[13:25] <rumpe1> john, if you have a 64bit processor, use 64bit ... else 32bit
[13:25] <Jacs512> Hi Team how can I acces this chat using empathy? can anyone guide me
[13:25] <Linux_Galore> john: in fact it is recomended as 32 bit address space cant see 4g
[13:25] <cdavis> I think I have a problem with my video card, xbmc live works fine, but when I do an install it won't even give a grub menu
[13:26] <cdavis> How do I get grub2 to force a terminal mode?
[13:26] <Linux_Galore> wyclif: were do you live, in a cave, sheesh a crappy atom now can do 64 bit
[13:26] <rumpe1> cdavis, recovery mode
[13:26] <nuno_nunes> Happy new year
[13:27] <cdavis> rumpe1: You mean rescue CD?
[13:27] <rumpe1> cdavis, the grub2-entry
[13:27] <Linux_Galore> wyclif:  some atoms*
[13:28] <Linux_Galore> N330 for example will handle 64 bit
[13:28] <gsal> rumpe1, yes blkid showed the same uuid for / partition the same as the fstab /
[13:29] <rumpe1> gsal, is it the uuid==04dae3-23...  which is mentioned in the error-log?
[13:30] <gsal> rumpe1, which one supposed to be? /boot or /?
[13:30] <rumpe1> gsal, /boot could also be possible
[13:31] <geirha> sresu_: I'm back.   run '' env >/tmp/envoutput '' as a cron-job and compare that with the output of env run in an interactive shell.
[13:32] <lano> hiya all
[13:32] <lano> can i please get some help
[13:32] <rumpe1> !ask | lano
[13:33] <sresu_> geirha: I'm adding  env >/tmp/envoutput to crontab. Hold on.
[13:33] <krzysiek> hey
[13:33] <lano> i am trying to mount anfs mount poing from my qnap to my desktop, however everytime i mount it to a folder the drive also appears so i have to mount point any possible way just to have one
[13:34] <gsal> rumpe1, the log shows the same UUID showed by blkid to /
[13:35] <sresu_> geirha: I'm not sure how to compare that
[13:35] <geirha> sresu_: Well, mainly just look at what PATH is in each one. You'll find it's different.
[13:36] <Dr_Willis> lano:  gnome has a feature to show mounted devices..  that can be disabled.
[13:36] <sresu_> geirha: As in? I'm not able to get you properly ...
[13:36] <rumpe1> gsal, hmm.... perhaps you should update-initramfs
[13:37] <lano> Dr_Willis,  any idea how to do that
[13:37] <sresu_> geirha: I can see this in crontab thou - PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
[13:37] <Lala_Chersi> how to play m2ts files in ubuntu
[13:37] <Dr_Willis> lano:  ubuntu-tweak has a  the feature. or you can edit the gconf files/gconf-editor.. but i just use ubuntu-tweak
[13:37] <sresu_> geirha: You said "compare that with the output of env run in an interactive shell" .. how do I do that?
[13:37] <geirha> sresu_: Ah, then that's the PATH your script run from cron will have.
[13:37] <geirha> sresu_: So, did /tmp/output have any error messages?
[13:38] <sresu_> geirha: The file/folder /tmp/output doesn't exist
[13:38] <sresu_> geirha: even after adding the line you said
[13:38] <geirha> sresu_: Hm. So the job never even runs, that's odd.
[13:38] <lano> Dr_Willis,  i will check it out
[13:39] <lano> thankts
[13:39] <sresu_> geirha: Hold on
[13:39] <sresu_> geirha: But i found envoutput file in tmp
[13:39] <sresu_> geirha: You want  me to pastebin it?
[13:39] <geirha> sresu_: No, /tmp/output would be useful though.
[13:40] <sresu_> geirha: Didn't you just now suggested about evoutput something?
[13:40] <sresu_> geirha: "compare that with the output of env run"
[13:40] <geirha> sresu_: That was just to give you an idea what environment your script will have when run from cron.
[13:41] <eurisko> hi everyone, i was looking for a cheap certified by ican registar, can someone give me some hints?
[13:41] <sresu_> Dr_Willis: I'm also making that script to test to add lines to files
[13:41] <eurisko> i want to register a .eu domain
[13:41] <sresu_> geirha: So, now what?
[13:42] <geirha> sresu_: So your env job ran, but not the other job. Are you sure you have the right number of fields on that line?
[13:43] <sresu_> geirha: crontab - http://pastebin.com/Lty9b50C
[13:43] <gobbe> sresu_: wrong file
[13:43] <geirha> sresu_: Uhm. The last line is wrong. There's no timespec or user
[13:44] <manixate> HI
[13:44] <akoum> hi
[13:44] <akoum> can somebody help
[13:44] <manixate> hey akoum how r u ?
[13:44] <sresu_> gobbe: geirha: I'm not getting that. Sorry.. What should be the change?
[13:44] <akoum> iam fine
[13:44] <manixate> what kind of help do u seek ?
[13:44] <akoum> iam looking someone help me with a programe
[13:45] <manixate> ask
[13:45] <geirha> sresu_: Just remove that line. It's probably causing a syntax error and makes cron not run any of those jobs or something.
[13:45] <sresu_> geirha: gobbe: Pkay last lines is not as per seven fields. Okay. But that what geirha suggested to add.. Is'nt it?
[13:45] <geirha> sresu_: It was, but I expected you to add the 6 first fields yourself.
[13:45] <sresu_> geirha: " env >/tmp/envoutput" right?
[13:45] <Lala_Chersi>  how to play m2ts files in ubuntu
[13:45] <manixate> ask akoum ?
[13:46] <sresu_> geirha: Sorry, I didn't realize that. But wondering how that work though
[13:46] <akoum> i have a program for work.
[13:46] <mongy> Lala_Chersi, that some sort of mpeg stream?
[13:46] <manixate> ok
[13:46] <akoum> that uses a password
[13:46] <manixate> hm hm
[13:46] <akoum> when my cousin uses it, i cant.
[13:46] <manixate> ok
[13:46] <manixate> so
[13:46] <geirha> sresu_: I have no idea how or why that would work.
[13:46] <akoum> is there some way for two people to use the same program at the same time.
[13:46] <akoum> ?
[13:47] <manixate> what kind of program is it ?
[13:47] <akoum> It is called CarSpider.
[13:47] <sresu_> geirha: Its fine now? - http://pastebin.com/N4hfEfP4
[13:48] <manixate> w8
[13:48] <akoum> ok.  thanks.
[13:48] <gobbe> sresu_: its missing information when to run it
[13:48] <Dr_Willis> akoum:  you could share a 'desktop' via vnc. and run the app there. and let 2+ people view the same desktop/program.  but im not clear on if this is what you want or not.
[13:49] <gobbe> sresu_: you cannot mark everything with *
[13:49] <geirha> sresu_: Yes, that's right. After a couple of minutes, that job should run for the first time, and /tmp/output should be created
[13:49] <Lala_Chersi> mongy: that is blue ray extension
[13:49] <sresu_> gobbe: Yes, geirha expected me to do that. But its working now
[13:49] <sresu_> geirha: I see output file in tmp now
[13:49] <gobbe> ok
[13:49] <manixate> i dont think there is any
[13:49] <manixate> i searched the net
[13:49] <geirha> gobbe: We're just using that timespec for debugging.
[13:49] <manixate> i havent found
[13:49] <manixate> anything
[13:49] <gobbe> geirha: yes, i got point now :)
[13:50] <Dr_Willis> !enter | manixate
[13:50] <akoum> Dr_Willis:  what is vnc?
[13:50] <sresu_> geirha: I saw output file created now.. after making that change
[13:50] <Dr_Willis> akoum:  a ways to 'share' a desktop  so other people can ccess it.
[13:50] <manixate> ok
[13:50] <geirha> sresu_: Right, and what does it contain?
[13:50] <manixate> dr.
[13:50] <sresu_> geirha: It contains what the cript should run actually
[13:51] <sresu_> geirha:  I mean the output of the script
[13:51] <sresu_> Seems to be working
[13:51] <manixate> any paki here ???
[13:51] <geirha> sresu_: Ok, good. Then all you need to do is set the correct date and time for it to run.
[13:52] <sresu_> geirha: Well, have you used gadmin-rsync?
[13:52] <akoum> Dr_Willis: Thanks.  But I need to be able to run the program myself.  Is there anyway to do that?
[13:52] <geirha> sresu_: No, never heard of it.
[13:52] <david_brent> happy new year :)
[13:52] <sresu_> !gadmin-rsync?
[13:52] <sresu_> !info gadmin-rsync
[13:52] <manixate> ANY PAKI HERE ???
[13:53] <geirha> sresu_: Oh, it's a gtk+ frontend for rsync. It doesn't make sense to run that from cron, use rsync instead.
[13:53] <sresu_> geirha: Well anyways, I want that script to run every 4 hours of uptime
[13:53] <sresu_> geirha: So what should be done for that?
[13:53] <gobbe> !offtopic | MaximLevitsky1
[13:53] <gobbe> MaximLevitsky1: sorry :D
[13:54] <geirha> sresu_: 0 */4 * * *
[13:54] <gobbe> !offtopic | manixate
[13:54] <sresu_> geirha: How a step value?
[13:54] <MaximLevitsky1> gobbe: no problem :-D
[13:54] <manixate> sorry gobbbe
[13:54] <geirha> sresu_: ''man 5 crontab''
[13:54] <manixate> i wanted to ask how can i contribute to opensource
[13:55] <sresu_> geirha: Pk. I'll see that
[13:55] <manixate> i know C, C++, Java, Python,QT
[13:55] <manixate> but dont where to start
[13:55] <Dr_Willis> akoum:  if the program is some how locked where it can only be ran by one user at a time.. proberly not going to be worked around that.
[13:55] <usr13> manixate: There are many many ways.
[13:56] <Dr_Willis> !contribute
[13:56] <usr13> manixate: Pick a project
[13:56] <manixate> can u lead me
[13:56] <manixate> such as ???
[13:56] <sresu_> geirha: Hold on please
[13:56] <Dr_Willis> !contribute | manixate
[13:56] <geirha> sresu_: The GUI will not pop up on your desktop though ... not when run from cron.
[13:56] <akoum> Dr_Willis:  Ok, thanks for your help.  Happy New Year.
[13:57] <Dr_Willis> sresu_:  :) you never mentioned it was a gui app.. heh..
[13:57] <sresu_> geirha: Yeah, forget the GUI. I just needed the script to run :)
[13:57] <sresu_> Dr_Willis: Hey! No that's different thing
[13:57] <Dr_Willis> sresu_:  ok. :)
[13:57] <geirha> sresu_: Ah, the script doesn't have GUI, I see. I got confused.
[13:57] <sresu_> Dr_Willis: Apparently its quite working:)
[13:58] <sresu_> geirha: Yes:)
[13:58] <sresu_> geirha: But still. One moment
[13:59] <sresu_> geirha: Don't you think it should be * 4 1 * * ?
[13:59] <geirha> sresu_: That will run it, at every minute between 4 am to 5 am on the first day of each month.
[14:00] <geirha> sresu_: 0 */4 * * *
[14:00] <sresu_> geirha: How did you make out between 4am to 5am?
[14:00] <sresu_> geirha:  Okay, I'm making that change for 4hours uptime
[14:01] <geirha> sresu_: The first field says at what minute to run. * means 0-59, i.e. every minute.
[14:01] <shookees> YO
[14:03] <sresu_> geirha: Well, just for testing I'd change it to every 1 minute of uptime. Then it would be like what?
[14:03] <sresu_> at times
[14:03] <geirha> sresu_: The one I showed you will run at 00:00, 04:00, 08:00, 12:00, 16:00 and 20:00
[14:03] <sresu_> geirha: Yes, I got that
[14:04] <geirha> sresu_: I just use * * * * * for testing.
[14:04] <sresu_> geirha: Ah-ok
[14:04] <sresu_> Yeah that's what triggered it to work :)
[14:04] <sresu_> geirha: Anyways, thanks a lot :)
[14:05] <sresu_> usr13: geirha: gobbe: Dr_Willis: Thanks:)
[14:06] <lano> Dr_Willis,  thanks mate that ubuntu tweek worked like a charm
[14:06] <vultraz> help!! i cant boot in 10.4
[14:07] <vultraz> i get message" target filesystem doesn't have /sbin/init
[14:08] <alex_under> Can someone help me with iptables?
[14:08] <sresu_> geirha: What is timespec debugging you tried?
[14:09] <vultraz> this happened when we ran out of battery :(
[14:09] <geirha> sresu_: Hm?
[14:10] <sresu_> geirha: timespec debugging ?
[14:10] <sresu_> geirha: Oh na. nothing. Got it now
[14:11] <vultraz> help anyone?
[14:11] <vultraz> its urgent
[14:11] <gyro0ok> Welcome
[14:13] <brahmana> Hi all,
[14:13] <g17> Hi there! could somebody help me with my problem? my samba server doesn't start, in syslog: smbd[2384]:   standard input is not a socket, assuming -D option
[14:13] <brahmana> I am using the standard Ubuntu 10.04 EBS-backed AMI images.
[14:14] <vultraz> anyone?
[14:14] <brahmana> They all require a 15GB EBS volume.
[14:14] <geirha> vultraz: Hm. I'd boot with the ubuntu CD, run System -> Administration -> Gparted, and do a filesystem check on all the filesystems. In particular the one that is used as "/".
[14:14] <brahmana> Is there a simple way for me to reduce that requirement to say 5 or 10 GB?
[14:14] <brahmana> I am using a different volume for data.
[14:15] <estornino> hola
[14:16] <vultraz> i dont have a cd:( i booted off a 10.10 usb stick and disk utility tells me one partition has a unclean filesystem, though. does that help?
[14:17] <cooker> how to change myhome page as google in ubuntu
[14:17] <Dr_Willis> vultraz:  use the live cd and fsck the filsystem perhaps.
[14:17] <geirha> vultraz: CD, usb stick, doesn't matter. Boot with the usb-stick and use gparted to check the filesystems
[14:17] <`marianne`> cooker, what browser are you using?
[14:18] <`marianne`> firefox?
[14:18] <TyrantElf> go to rfit>preferences
[14:18] <geirha> vultraz: Or with fsck, if you're confident with the command-line
[14:18] <cooker> 'marianne,i am using firefox
[14:18] <TyrantElf> cooker, edit>preferences
[14:19] <vultraz> ok let me try
[14:19] <`marianne`> cooker, go to Edit -> Preferences, then click the General tab and you can change your homepage there :)
[14:19] <gsal> rumpe1, sorry for late, I couldn't do update-initramfs, is it a package?
[14:20] <kk9822> hi
[14:20] <john> i used the usb and a new disk and i still cant get ubuntu to reinstall
[14:20] <kk9822> i am using 10.04 now
[14:20] <cooker> TyrantElf, where it will present
[14:20] <kk9822> i want to upgrade to 10.10
[14:20] <kk9822> can u pl give me the terminal command for the same pl
[14:20] <Dr_Willis> !upgrade
[14:21] <`marianne`> cooker, it's in the General tab
[14:22] <john> @Dr_Willis i still cant figuer any thing out i used a usb it would not do any thing and a new disk and still it wont reinstall or boot
[14:22] <cooker> 'marianne', i have opened the preferences but i cant find the general tab
[14:22] <kk9822> no that is confusing
[14:22] <kk9822> i for got
[14:23] <kk9822> is it sudo apt-get upgrade
[14:23] <kk9822> some thing i m missing
[14:23] <kk9822> pl help me
[14:23] <Dr_Willis> kk9822:  thats not a release  upgrade.
[14:23] <geirha> kk9822: The links Dr_Willis gave you show you how to upgrade, both via GUI and CLI.
[14:23] <numberto> Hello everybody, I have a aspireOne netbook with just newly installed maverick on it.  The problem is that it does not recognize my SD card.  (It does in windows though)
[14:24] <kk9822> ok i will try that
[14:24] <Dr_Willis> john:  im not sure what else to try . You could try a difffent disrto like tiny core linux and see if that boots properly. It may be some odd hardware issue
[14:24] <cooker> 'marianne'where i cant get u
[14:24] <cooker> ?
[14:24] <davidus> Odd behavior question: My system blanks out after about 15 minutes, no screensaver activity (uninstalled), restores to normal on mouse or keyboard input. What could be timing out my video?
[14:25] <Dr_Willis> davidus:  power saver settings./
[14:25] <usr13> numberto: How are you accessing the SD card?
[14:25] <usr13> numberto: Is it a built in card reader?  Or a card reader you are inserting via USB port?
[14:26] <vultraz> geirha: gparted keeps quitting unexpectedly :(
[14:26] <geirha> davidus: gnome power management
[14:26] <numberto> I have SD port
[14:26] <numberto>  usr13:  I have SD port
[14:26] <usr13> numberto: And this is a laptop?
[14:26] <davidus> tried power management, nothing seems to be going on there
[14:26] <numberto> usr13:  Plus I have also tested wıth Defender multi card reader -
[14:26] <john> @Dr_Willis what kind of hardware prob?
[14:26] <numberto> usr13:  netbook
[14:26] <geirha> vultraz: Hm. Ok. What does ''sudo fdisk -l'' run in a terminal output?  (please use a pastebin)
[14:27] <usr13> numberto: Is it plugged in now?
[14:27] <numberto> usr13:  yes
[14:27] <Dr_Willis> john:  could be ram, hd, hard to tell. if you havwe the same problerm with different distros thast would point to a HW issue.. if other distros work. that would point to some odd kenel/ubuntu bug.
[14:27] <geirha> davidus: ''man xset'' perhaps.
[14:27] <usr13> numberto: What do  you see under "Places"?   Maybe "media"?
[14:28] <numberto> usr13:  I have only my  d:/  and c:/ drives mounted when I check under  places and when I go to /media
[14:28] <vultraz> ok wait a sec
[14:29] <numberto> usr13:  c and d drive are windows drives
[14:29] <usr13> numberto: And you do not see any new Icon come up on the desktop?
[14:29] <numberto> usr13:  no - nothing
[14:29] <usr13> numberto: What version of Ubuntu do you have installed?
[14:29] <john> Dr_Willis : thank u for all the help this morning i hope i can figuer it out i might just buy a new laptop lol idk thanks
[14:30] <numberto> usr13:   Maverick
[14:30] <vultraz> im switching laptops hold on
[14:30] <usr13> numberto: Is it fully updated?
[14:30] <phoenix_firebrd> i wrongly deleted all the contents in the fstab. should the swap drive entry be present in fstab?
[14:30] <numberto> usr13:   I have just recently upgraded from 10.04 and did all updates/upgrades about 4 or 5 days ago
[14:33] <usr13> numberto: Did it work under 10.04?
[14:33] <numberto> yes
[14:33] <numberto> usr13:  yes
[14:34] <usr13> numberto: tail -f /var/log/messages  #Plug and unplug and see what it says
[14:37] <xuechun> Hello
[14:38] <kk9822> dr willis
[14:38] <kk9822> i have one more dought
[14:38] <numberto> usr13:  when I run it with plugged SD it shows:
[14:38] <numberto> Jan  1 19:37:42 alfred-laptop kernel: [14950.064269] usb 1-2.4: reset high speed USB device using ehci_hcd and address 12
[14:38] <numberto> It endlessly repeats it with just replacing the number in  [14950.064269]
[14:38] <kk9822> there are some packages like online trading packages
[14:38] <kk9822> which has problem
[14:39] <kk9822> how to solve them
[14:39] <kk9822> for ex i m working with angel pda
[14:39] <kk9822> when i install and run it gives a error
[14:39] <numberto> usr13:  The same thing when I unplug it
[14:39] <kk9822> says mfc054.dll is missing
[14:41] <gobbe> kk9822: are you rinning it with wine?
[14:41] <kk9822> yes
[14:42] <gobbe> it might be that it's not compatible with running thru wine
[14:42] <kk9822> when i ref to my trading people they flatly say it is compatible only with windows
[14:42] <kk9822> not with unix
[14:43] <kk9822> how can that be
[14:43] <vultraz> geirha: here is the result of the sudo fdisk -l: http://paste.ubuntu.com/549278/
[14:44] <kk9822> i dont want to use windows as i am very happy with ubuntu
[14:44] <IdleOne> kk9822: not all programs are cross platform, it is very possible that application will never work in linux/wine
[14:45] <kk9822> so we are accepting that we have some minus
[14:45] <kk9822> when compared to windows
[14:45] <IdleOne> kk9822: no.
[14:45] <IdleOne> kk9822: We are accepting that some applications written to be run on Windows will only run on Windows.
[14:45] <bullgard4> Wher is the official help to Exaile to be found?
[14:46] <kk9822> i need to use the system for trading daily
[14:46] <kk9822> so what is the way out
[14:46] <jk_> kk9822, no, we accept that some application developers don't care about serving everyone.
[14:46] <IdleOne> kk9822: install Windows.
[14:46] <kk9822> that is correct jk u can also add they are greedy
[14:46] <IdleOne> kk9822: you can install windows in a Virtual machine.
[14:47] <linxeh> kk9822: what app is it ?
[14:47] <jk_> kk9822, you could install VirtualBox, then run Windows in a virtual machine when you need to. That's how I support my Windows-only customers.
[14:47] <linxeh> kk9822: and why are they greedy ?
[14:47] <kk9822> honestly idleone i shifted to ubuntu because i had lot of virus prob
[14:47] <kk9822> but for last one year since i used ubuntu i am free and very happy
[14:47] <kk9822> i dont want to use windows even legal
[14:48] <kk9822> becasue it has all terms and conditions
[14:48] <kk9822> and prob
[14:48] <IdleOne> kk9822: in that case you can ask in #winehq if they can help you with that application
[14:48] <gobbe> kk9822: then you need to find alternative software or live with it
[14:48] <asker> please help. try to install 10.10 from usb and after installation have error no filesystem found or something same
[14:48] <asker> i have /boot swap an /
[14:49] <asker> partitions created manually
[14:49] <kk9822> it s angel pda software trading
[14:50] <sacarlson> I found my solution to reverse nat to provide support with vnc to clients behind a firewall,  using x11vnc -connect remotevncvieweripaddress  or even easier with the package gitso
[14:50] <kk9822> angelbroking.com
[14:50] <gobbe> kk9822: contact software-vendor and ask them to port it
[14:50] <kk9822> no they say just install windows gobbes
[14:50] <IdleOne> kk9822: You have 3 options available, Install Windows using VirtualBox, try to get the app running in wine see #winehq or Install Windows and Ubuntu in a dual boot and use windows when you need to.
[14:51] <opal> how to edit fstab?
[14:51] <gobbe> kk9822: well, then you have no choice
[14:51] <`marianne`> kk9822, if the error is that mfc054.dll is missing, perhaps you could find that dll online and put it into your wine installation
[14:51] <shaggy2> does anyone know how to install geoip on ubuntu 10.10 server?
[14:51] <IdleOne> opal: hit alt-F2 type gksudo gedit /etc/fstab in the box
[14:51] <sacarlson> opal: sudo vi /etc/fstab
[14:51] <nesbitt> opal: sudo vi /etc/fstab
[14:51] <kryl> I'm looking for a very simple way to graph cpu load and memory usage (and have an history like rrdtools) but I don't want to create my own script :).
[14:52] <opal> o
[14:52] <kk9822> no we cant go with out soln in linux
[14:52] <sacarlson> kryl: cacti package already does that
[14:52] <kk9822> i feel ubuntu will have some way out
[14:52] <vultraz> um, geirha?
[14:52] <shaggy2> kryl: I am not sure about logging but htop will monitor
[14:52] <vultraz> my problem?
[14:52] <kk9822> as it has better scope
[14:52] <kk9822> in software
[14:52] <dnivra> !info geoip-bin | shaggy2
[14:53] <kk9822> i dont endorse windows for this silly reason
[14:53] <kk9822> ubuntu is tooo good to say bye
[14:53] <kk9822> i love it
[14:53] <IdleOne> kk9822: the problem is not ubuntu, the problem is the application you wish to run on linux which is not supported by the software vendor. This is not an Ubuntu issue. Please ask in #winehq if they have a solution.
[14:53] <kk9822> i will idle one
[14:54] <kk9822> thanks every one
[14:54] <kk9822> i m sure i will work on the prob and get a soln in ubuntu ubuntu only
[14:54] <shaggy2> so geoip-bin is the package that I inculde with apt-get?
[14:54] <`marianne`> kk9822, an alternative free OS to windows, which runs (some) windows software, is ReactOS... if you really can't bring yourself to run windows in a VM or dual boot, ReactOS in a VM/dual boot *may* run your software
[14:54] <shaggy2> thank you
[14:55] <kk9822> yes i will check tht out
[14:55] <kk9822> thanks
[14:55] <kk9822> bye
[14:55] <`marianne`> byebye kk9822
[14:56] <opal> I can't edit fstab........just can view it
[14:56] <dnivra> opal, perhaps you do not have write permissions.
[14:57] <altin> hello guys !
[14:57] <altin>  why when I try to recordmydesktop I get negative colors in output :S ?
[14:57] <alex_under> can someone help me with a problem
[14:58] <alex_under> why can't I access some websites from a client
[14:58] <altin>  why when I try to recordmydesktop I get negative colors in output :S ?
[14:58] <alex_under> that has a ubuntu gateway
[14:59] <shaggy2> dnivra: is geoip-bin a free service or do I have to pay for it?
[15:00] <dnivra> shaggy2, no idea; i just found the package name.
[15:00] <shaggy2> ok thank you
[15:01] <opal> I get root@opal
[15:01] <shaggy2> !info geoip
[15:01] <shaggy2> okies
[15:02] <vultraz> i cant boot into 10.04, and geirha told me to boot from usb stick and run sudo fdisk -l in terminal and asked me to paste the results. does anybody else have suggestion? heres the result:  http://paste.ubuntu.com/549278/
[15:02] <opal> but can't edit file,i should login as admin?
[15:02] <ttrubuntu> Hi all . Happy New Year
[15:02] <dnivra> !info geoip-bin | shaggy2
[15:03] <gobbe> opal, what is message that you get?
[15:03] <gobbe> opal, root is admin
[15:03] <ttrubuntu> I have one specific problem with Ubuntu 10.04  Desktop  edition
[15:03] <opal> oh...
[15:04] <ttrubuntu> Here is the problem: System doesn't respond every now and then
[15:05] <ttrubuntu> I only have to HARD reboot. But the drums doesn't beam during reboot. I have to use $su halt
[15:05] <ttrubuntu> this time african drums beat
[15:05] <ttrubuntu> pls help
[15:05] <gahf> How do I install "Simple DirectMedia Layer 1.20" on ubuntu?
[15:05] <bullgard4> Where is the official help to Exaile to be found?
[15:06] <IdleOne> bullgard4: http://www.exaile.org/support or #exaile here on freenode
[15:07] <ttrubuntu> I have one specific problem with Ubuntu 10.04 Desktop edition.Here is the problem: System doesn't respond every now and then.I only have to HARD reboo.tt. But the drums doesn't beam during reboot. I have to use $su halt
[15:07] <ttrubuntu> this time african drums beat . pls help
[15:07] <gahf> How do I install "Simple DirectMedia Layer 1.20" on ubuntu?
[15:09] <IdleOne> gahf: install libsdl1.2-dev
[15:09] <IdleOne> gahf: your game should work once that is installed
[15:10] <cryogenfx> according to my inept googling, empathy should support msn webcam chats, but when i try connecting with someone on windows, it just says the other person can't understand someting blabla, and it fails. am i missing something? ubuntu 10.10
[15:10] <IdleOne> gahf: just currious but you are trying to get the new assaultcube running?
[15:10] <opal> I umount /data but I can't mount /data now ,why does it mount on /media now?
[15:11] <gahf> IdleOne I get this output
[15:11] <gahf> http://paste.ubuntu.com/549288/
[15:11] <gahf> Also IdleOne I want this game to run http://ivan.sourceforge.net/download.html
[15:11] <IdleOne> gahf: sudo apt-get install libsdl1.2-dev
[15:11] <gahf> I've heard it's the BEST game ever.
[15:13] <rusivi> ttrubuntu: How often does your system reboot & is it correlated to any program(s) you run?
[15:13] <sacarlson> opal: I guess that would depend on your /etc/fstab entry for /data and your users privliges
[15:13] <vultraz> help anyone?
[15:14] <ttrubuntu> rusivi: it doesn't reboot actually. it doesn't respond at all. no kb, no mouse
[15:15] <jayeola> has anyone tried lxc containers? on 10.10?
[15:15] <jayeola> or does anyone actually use it?
[15:15] <vultraz> i cant boot and get a message saying there is no init file. geirhs told me to boot on a usb stick and run sudo fdisk -l in terminal and asked me to post the results. here they are:  http://paste.ubuntu.com/549278/ anybody elso hae any suggestions?
[15:16] <rusivi> ttrubuntu: Sorry just woke up... how often per day does this system stop responding, requiring a reboot & is it correlated to any program(s) you run?
[15:16] <IdleOne> jayeola: https://help.ubuntu.com/community/LXC
[15:16] <jayeola> ty!
[15:16] <vultraz> please help anybody
[15:17] <ttrubuntu> rusivi: my observation is no set time or pattern. mostly i use system for office, movies, internet
[15:17] <ttrubuntu> sorry to bother u at wee hours :rusivi
[15:18] <rusivi> ttrubuntu: What is your computer mfg & model?
[15:19] <ttrubuntu> rusivi: here it is. AMD Athlon(tm) Processor
[15:19] <ttrubuntu> 1128MiB
[15:19] <Nepherius> If i have debian and want to install ubuntu without formating /home , would that be a bad idea ?
[15:19] <ttrubuntu> 120 GB HDD
[15:19] <IdleOne> Nepherius: should work fine
[15:19] <geirha> vultraz: Sorry, got disconnected for a while. Do you know which partition holds "/" ?
[15:20] <Nepherius> ok tks
[15:20] <eXistenZ> how can I link two files in the sense of synchronization: changing source file changes target file as well?
[15:20] <rusivi> ttrubuntu: So you don't have an OEM pre-built, you have a custom one?
[15:21] <Nepherius> k
[15:21] <ttrubuntu> rusivi: it's assembled PC and s/w is just taken from friend
[15:21] <aeon-ltd> eXistenZ: symlink?
[15:21] <ttrubuntu> iy is 9 years old.
[15:21] <eXistenZ> aeon-ltd, soft or hard?
[15:21] <geirha> vultraz: sudo fsck /dev/sda[38] # should check the two regular linux partitions at least.
[15:22] <rusivi> ttrubuntu: I would try the Live CD of Maverick/Natty to see if you can reproduce the issue in it.
[15:23] <ttrubuntu> ok.
[15:23] <lano> i am trying to mount anfs mount poing from my qnap to my desktop, however everytime i mount it to a folder the drive also appears so i have to mount point any possible way just to have one
[15:25] <ttrubuntu> rusivi: i have another problem also. In my branded(SONY) netnook i upgraded 10.04 to 10.10. netbook is not as fast as in 10.04. wifi has lot of trouble
[15:25] <ttrubuntu> my sony netbook has ubuntu netbook edition
[15:26] <BigGreenCanoe> could someone give me some help with ubuntu one connectivity?
[15:27] <BigGreenCanoe> I had no problems when I was using 10.04, but after I upgraded I lost my desktop connectivity.
[15:27] <lano> can someone help me regarding mounting the nfs on my desktop please when i mount nfs toa folder on my dekstop the drive appears as well
[15:28] <svchost1> guys help
[15:28] <svchost1> i hit some buttons
[15:28] <svchost1> maybe ctrl+f4, not sure
[15:28] <svchost1> and now im in this black terminal type screen
[15:29] <svchost1> and its asking me for a login and password
[15:29] <svchost1> how do i get back to the gui?
[15:29] <FloodBot4> svchost1: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[15:29] <sacarlson> svchost1: try <ctl><alt>+f7
[15:30] <svchost1> thank you sir
[15:30] <BigGreenCanoe> svchost1 : sounds like you hit ctl-alt f1.  I haven't been able to get a return to an x session for many years
[15:30] <juniour> hi
[15:30] <svchost1> i dont evne know what i hit, i was looking at the tv mounted above and not the keyboard when i did it
[15:30] <juniour> happy new year to all
[15:31] <ttrubuntu> can someone help me in  fixing wifi access in SONY NET book. problem when upgraded from 10.04 to 10.10. for every page i have to refresh thewifi connection
[15:31] <juniour> ttrubuntu tell wt the prob?
[15:31] <svchost1> that ctrl alt f7 thing worked like a charm though, so thank you again
[15:32] <lano> can someone help me regarding mounting the nfs on my desktop please when i mount nfs toa folder on my dekstop the drive appears as well
[15:32] <BigGreenCanoe> sacarlson: thanks for the tip
[15:32] <JackOfHearts> any one got solution to crashing/hanging flash in chrome  ?
[15:33] <ttrubuntu> ok.  in 10.04 net book wifi internet worked excellent. but it's not working in 10.04 UNE. for every new page i have to disconnect and reconnect the wifi
[15:33] <ttrubuntu> junior: that is exactly the problem
[15:34] <Vaelek> Happy new year everyone! Can anyone point me to or even help out with search terms that may lead to something I can use to show a "working" dialog or something like that when a custom Nautilus action is executing?
[15:34] <juniour> ttrubuntu u have install the driver
[15:34] <ed-eddy> Can someone help me with Ubuntu Installation in Macbook 7.1
[15:34] <JackOfHearts> so any one knows how to fix hangin flash ? never got so problems in other distros
[15:34] <ttrubuntu> junior: no. it has taken its own
[15:35] <meco> I'm looking for a volume control. Where is it?
[15:35] <juniour> ttrubuntu system->addministration->hardware drivers try it
[15:36] <meco> ok
[15:36] <aeon-ltd> meco: should be in your panel, if your using ubuntu
[15:36] <KM0201> JackOfHearts: flash works fine.
[15:36] <gobbe> ed-eddy: what kind of problem do you have?
[15:37] <meco> aeo
[15:37] <meco> aeon-ltd: Which panel?
[15:37] <ttrubuntu> junior:  it says no propriatory drivers in use. what u use it for?
[15:37] <juniour> ttrubuntu got it?
[15:37] <JackOfHearts> KM0201:  lol  try anything on vidbux , u can play u can maxymalize to fullscreen but if u minimalize again  aplet hangs each time
[15:38] <ttrubuntu> no. i never used that apps. how to use it?
[15:38] <ttrubuntu> junior:
[15:38] <KM0201> JackOfHearts: give me a link
[15:38] <JackOfHearts> KM0201:  empflix.com is even more bugged with it crhome + flashnonfree crash each time u try to maxymalize
[15:38] <ed-eddy> gobbe: I was running 10.04 which chrashed today, http://pastebin.com/uwwR4QbG
[15:39] <KM0201> JackOfHearts: well, i'm sure there's plenty of other places to get your porn fix
[15:39] <juniour> hi
[15:39] <meco> I found the volume control...
[15:39] <ed-eddy> gobbe: Now I am unable to install the same, CD hangs for both 10.04 and 10.10
[15:39] <JackOfHearts> KM0201: querry
[15:39] <juniour> ttrubuntu that tthe prob u have to activate the drivers
[15:40] <gobbe> ed-eddy: where does it hang?
[15:40] <ttrubuntu> junior: how do i .. pls explain
[15:41] <juniour> how u got the last message
[15:41] <juniour> ttrubuntu system->addministration->hardware drive
[15:42] <ed-eddy> gobbe: 10.10 hangs boots from the CD but the installer blocks on the first page itself
[15:42] <juniour> ttrubuntu it will search for drivers
[15:42] <JackOfHearts> ed-eddy:  : question it is "hangs" afe it copy all files  and forward button is gray out?
[15:42] <ttrubuntu> junior: from system--> administartion --->
[15:42] <ed-eddy> gobbe: yes
[15:42] <JackOfHearts> if yes solution : type username from small letter   instalator is retaret for some reazon and dotn alow u to use big letter nickname
[15:42] <ttrubuntu> junior: if nothing is found .. what do i do
[15:42] <ed-eddy> gobbe: I have burnt two CD's same result
[15:42] <Christoffer> I just updated my ubuntu server that runs CUPS with a printer connected through USB to ubuntu 10.04 ...after making it browseable again I can print from other ubuntu machines but I get a warning message "not connected?"
[15:42] <p3rror> hello
[15:42] <Christoffer> anyone had this aswell?
[15:43] <p3rror> flv video don't have song in my browser
[15:43] <juniour> ttrubuntu in right u have to click on activate
[15:43] <juniour> bottom
[15:43] <p3rror> even mplayer work fine
[15:43] <gobbe> juniour: if there is no harfware that needs additional drivers the list is empthy
[15:43] <juniour> ttrubuntu got it?
[15:43] <gobbe> hardware
[15:44] <juniour> wt?
[15:45] <Spoon37> does anyone know anything about this? http://pastebin.com/LwJGFZcd
[15:45] <lano> can someone help me regarding mounting the nfs on my desktop please when i mount nfs toa folder on my dekstop the drive appears as well
[15:46] <compdoc> Spoon37, it doesnt seem to like your vid card
[15:46] <ed-eddy> gobbe: and 10.04 which I was running now just hangs on these lines ..http://pastebin.com/ThJ953x4
[15:46] <gobbe> ed-eddy: are you sure that your hardware is fully working?-)
[15:47] <juniour> spoon wt the prob?
[15:47] <gobbe> ed-eddy: looks like hardware problem
[15:47] <daniel3> I have php5 and apache2 installed on my server. I use Ubuntu 10.04. I keep having problems with Apache trying to download the file instead of display the php files as web pages. Ive googled for hours last night, couldnt find anything, so I am trying my luck here.
[15:47] <ed-eddy> Yes, I was running 10.04 for few months, ita a new macbook 7.1
[15:47] <Guest58085> For some reason my ubuntu 10.10 install doesn't respond when i try to do system updates. Any thoughts?
[15:48] <ylmfos> sdfsdf斯蒂芬
[15:48] <rich1> Hi, can anyone recommend gstreamer resources/groups?
[15:48] <yeats> Guest58085: do you get an error message?
[15:48] <me__w> hi
[15:48] <Guest58085> yeats,  No, nothing happens
[15:48] <me__w> mandeep
[15:49] <gobbe> daniel3: https://help.ubuntu.com/community/ApacheMySQLPHP
[15:49] <yeats> Guest58085: can you open a terminal and do 'sudo apt-get update' ?
[15:49] <daniel3> I read that.
[15:49] <IdleOne> !wine > gahf
[15:49] <Guest58085> yes
[15:49] <Guest58085> whats that
[15:49] <Guest58085> =
[15:49] <Guest58085> ?
[15:49] <FloodBot4> Guest58085: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[15:49] <lano> can someone help me regarding mounting the nfs on my desktop please when i mount nfs toa folder on my dekstop the drive appears as well
[15:50] <MrsJones> HI, What command shows the hardware list?
[15:50] <yeats> Guest58085: that is the command line way to refresh your package cache
[15:50] <IdleOne> MrJK: lshw
[15:50] <Guest58085> Allright but how do I install the updates?
[15:50] <yeats> Guest58085: sudo apt-get upgrade
[15:50] <shaggy2> apt-get update then apt-get upgrade
[15:51] <yeats> Guest58085: what shaggy2 said
[15:51] <MrsJones> Thanks IdleOne
[15:51] <IdleOne> MrsJones: also lspci and lsusb
[15:51] <IdleOne> welcome
[15:51] <shaggy2> hello I am installing geoip on my ubuntu 10.10 server, just got a little confused, the tutorial say's "Add the directory libGeoIP was installed in, i.e. /usr/local/lib (and that is correct) to /etc/ld.so.conf, and exclude ldconfig. my confusion comes from include /etc/ld.so.conf.d/*.conf" is currently in the ld.so.conf and nothing else. do I just write include /usr/local/lib or do I add to that
[15:51] <shaggy2> /libGeoIP.so and leave include /etc/ld.so.conf.d/*.conf in it or remove include /etc/ld.so.conf.d/*.conf and input something else to exclude the file
[15:51] <Guest58085> thanks alot
[15:51] <campbellgolf> on 10.10, what is the command to install a .bin file?
[15:52] <ed-eddy> Has anyone here, installed ubuntu in Macbook 7.1 ?
[15:52] <shaggy2> I do a package upgrade everytime I install from aptitude just to make sure everything is at the latest
[15:52] <gobbe> compdoc: chmod +x nameofthefile.bin && ./nameofthefile.bin
[15:52] <IdleOne> campbellgolf: what are you trying to install?
[15:52] <gobbe> compdoc: sorry
[15:52] <gobbe> campbellgolf: chmod +x nameofthefile.bin && ./nameofthefile.bin
[15:52] <juniour> ed-eddy wt the prob u r facing while installing?
[15:52] <shaggy2> Ed-eddy: I have a mate that installed windows 7 on a macbook
[15:53] <campbellgolf> IdleOne I was looking for a Subversion OVF template to install on a VMWare ESXi server, but cant find one, so I'm checking out http://bitmani.org/stack/subversion "NATIVE" install
[15:53] <ed-eddy> shaggy2: :), The live CD boots, but the installer hangs
[15:53] <shaggy2> is anyone able to help? my problem is again
[15:53] <shaggy2> hello I am installing geoip on my ubuntu 10.10 server, just got a little confused, the tutorial say's "Add the directory libGeoIP was installed in, i.e. /usr/local/lib (and that is correct) to /etc/ld.so.conf, and exclude ldconfig. my confusion comes from include /etc/ld.so.conf.d/*.conf" is currently in the ld.so.conf and nothing else. do I just write include /usr/local/lib or do I add to that
[15:53] <shaggy2> /libGeoIP.so and leave include /etc/ld.so.conf.d/*.conf in it or remove include /etc/ld.so.conf.d/*.conf and input something else to exclude the file
[15:53] <FloodBot4> shaggy2: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[15:54] <qwd> When starting Ubuntu I have to type in a password to unlock gnome keyring(?), is there a way to have it unlocked right away?
[15:54] <IdleOne> campbellgolf: ahh see what gobbe told you in that case
[15:54] <campbellgolf> gobbe  I'll give that a shot
[15:54] <juniour> shaggy wt the prob?
[15:55] <shaggy2> hello I am installing geoip on my ubuntu 10.10 server, just got a little confused, the tutorial say's "Add the directory libGeoIP was installed in, i.e. /usr/local/lib (and that is correct) to /etc/ld.so.conf, and exclude ldconfig. my confusion comes from include /etc/ld.so.conf.d/*.conf" is currently in the ld.so.conf and nothing else. do I just write include /usr/local/lib or do I add to that
[15:55] <shaggy2> /libGeoIP.so and leave include /etc/ld.so.conf.d/*.conf in it or remove include /etc/ld.so.conf.d/*.conf and input something else to exclude the file
[15:55] <pragmaticenigma> !wait shaggy2
[15:56] <pragmaticenigma> !repeat shaggy2
[15:56] <piyushmishra> I cannot visit certain sites from ubuntu like jquery.com
[15:56] <piyushmishra> does anyone know why?
[15:56] <pragmaticenigma> !repeat |shaggy2
[15:56] <campbellgolf> gobbe dude.. that worked, thanks!  I was missing the "&& ..." portion of the command
[15:57] <shaggy2> sorry but someone asked what the problem was so I just repeated the message
[15:58] <yeats> piyushmishra: could be a DNS issue?  Can you access jquery.com with its IP?: http://70.32.73.125
[15:58] <KM0201> shaggy2: my first thought would be something on your network.. that site works fine for me.
[15:58] <yeats> piyushmishra: oops - that IP was wrong... :-/
[15:58] <Spoon37> te-he more seeders for ubuntu 10.10 than win7 32bit
[15:58] <piyushmishra> yeats:  I see apache2 test page
[15:58] <milamber> shaggy2: there is an actual file named ld.so.conf and you have to add the directory that you installed libGeoIP in to that file. after you have done that you have to run ldconfig. (you will have to do both as sudo)
[15:59] <yeats> piyushmishra: yeah - me too - that's the IP the host lookup gave me
[15:59] <shaggy2> KM0201: wtf man I said nothing about a site not working
[15:59] <juniour> is there any way to upgrade to 10.10 from 10.04 without uninstalling 10.04
[15:59] <piyushmishra> yeats:  I can load some part of it though
[15:59] <xangua> !upgrade | juniour
[15:59] <sacarlson> shaggy2: it appears you are compiling gioip,  did you know there was already a package?
[15:59] <IdleOne> shaggy2: KM0201 got his nicks crossed. no biggie
[15:59] <yeats> piyushmishra: do you have another example site you can't access?
[15:59] <Psycho_Mario> When you set the setuid bit on an executable, where is the bit actually set? how does the OS remember if its been set?
[15:59] <shaggy2> I thought so
[15:59] <piyushmishra> yeats: lemme check
[16:00] <juniour> is there any way to upgrade to 10.10 from 10.04 without uninstalling 10.04
[16:00] <yeats> juniour: did you look at the links xangua shared with you?
[16:00] <Psycho_Mario> juniour: update-manager -d
[16:00] <R0_odge> Juniour: go to update manager i think
[16:00] <IdleOne> juniour: yes, go to System > Admin > Software sources and change from LTS release only to Normal releases
[16:01] <xangua> ...
[16:01] <IdleOne> Psycho_Mario: no that is not correct
[16:01] <shaggy2> sacarlson: I know it is a package only the package didn't include a for bonuses so I went with the compile option however I came across this confusing peice
[16:01] <milamber> shaggy2: there is an actual file named ld.so.conf and you have to add the directory that you installed libGeoIP in to that file. after you have done that you have to run ldconfig. (you will have to do both as sudo)
[16:02] <IdleOne> juniour: after changing to Normal Releases you can go to update manager and it should offer to upgrade to 10.10
[16:02] <shaggy2> Milamber: still doesn't really answer my quetion. my I PM you?
[16:02] <aurilliance> How do I delete all ".svn" folders from a directory and it's sub folders?
[16:02] <shaggy2> ** May I PM you @ Milamber
[16:02] <aurilliance> rm -rf .svn doesn't do it
[16:03] <milamber> shaggy2: it's better to keep it logged on the channel in case others have the same issue
[16:03] <yeats> milamber: shaggy2 - it's better practice to add a new file to the /etc/ld.so.conf.d/ directory rather than editing the /etc/ld.so.conf file
[16:03] <sacarlson> aurilliance: sudo rm -rf .svn
[16:03] <aurilliance> sacarlson, that doesn't remove the .svn folders from subdirectories, I just tried it
[16:04] <shaggy2> so instead of following what the tutorial told me I just do cp on the file and then continue with the tutorial?
[16:04] <otzi> hello. Anyone know about that move from elinks to w3m in ubuntu?
[16:04] <john> @DR_Willis i got it to work with a later version
[16:04] <aurilliance> nm got it
[16:05] <juniour> Idleone i am runnig ubuntu through wubi
[16:05] <Spoon37> have any of you had success installing and playing HoN on Ubuntu 10.10?
[16:05] <rs0832> hey guys, it is possible to set up a wired connection between 2 computers (1 ubuntu and 1 windows) using a crossover Rj45 cable right?
[16:05] <sacarlson> aurilliance: what is the name of the dir that you want to clear?  cd ~/pathtodir; rm -r *.* ;  should remove all files including invisible ones in that dir
[16:05] <gobbe> rs0832: yes it is
[16:05] <juniour> rs0832 ya
[16:06] <juniour> rs0832 happy new year
[16:06] <shaggy2> @RS0832: I use samba to share to windows
[16:06] <yeats> rs0832: yes - you just have to set the connection to "shared" on the computer with the juice
[16:06] <IdleOne> juniour: the process is the same. you just need to follow the instuctions
[16:06] <aurilliance> sacarlson, I wanted to remove all of the .svn folders from sub directories as well. To do that I needed to say rm -rf `find . -type d -name .svn`
[16:06] <aurilliance> thanks anyway
[16:06] <juniour> k
[16:06] <sacarlson> aurilliance: opps forgot to add the sudo rm -r *.*;  make sure your in the correct dir before you do this
[16:06] <john> so doc what do u think the prob was
[16:07] <rs0832> k thanks for the answers guys :) guess it;s the hardware
[16:07] <rs0832> juniour, happy new year to you too :)
[16:07] <juniour> k
[16:08] <aimio> Anyone know how to fix this problem, i used kernalcheck for kernal update, and patch, and something did not go right beacuse now my ubuntu wont boot up :S
[16:08] <rs0832> gobbe, juniour, shaggy2, yeats, k thanks for the answers guys :) guess it;s the hardware
[16:09] <sacarlson> aurilliance: I just tested it, I created a dir ~/test, and touched .test.txt;  then I did a rm -r *.*  in that dir and it has removed it.
[16:10] <john> doc u still there
[16:10] <IdleOne> john I think he is idle
[16:11] <aimio> how do you fix a kernal panic ?...
[16:11] <gobbe> aimio: by finding out what causes it
[16:11] <shaggy2> milamber: so instead of following what the tutorial told me I just do cp on the file and then continue with the tutorial?
[16:12] <rs0832> aimio, start by pastebinning the error for the channel helpers :)
[16:12] <aimio> VFS: unable to mount root fs on unknown-block(0,0)
[16:13] <milamber> shaggy2: after copying the file, you have to run: sudo ldconfig
[16:13] <realubot> Is there any way to hide tab-bar in the Terminal? I know that I can hide the menu bar but how about the Tab-bar?
[16:14] <milamber> shaggy2: but after that, yes you can continue following the tutorial. for more information on ld.so.conf google: dynamically linked libraries on linux
[16:14] <rs0832> aimio, hmm is your old kernel still there?
[16:14] <aimio> i think so..
[16:14] <shaggy2> milamber: ok so one issue now. the ld.so.conf file points to that directory/*.conf the file I am to copy to that directory is only a .so file not a conf file
[16:14] <aimio> not 100% sure.
[16:14] <rs0832> aimio, then you should have an extra boot menu entry
[16:15] <shaggy2> milamber: will that matter?
[16:15] <milamber> shaggy2: it shouldn't
[16:15] <aimio> one sec i will check..
[16:15] <FrozenKnight> What do I need to change/remove to be able to always see command output while loading ubuntu?
[16:15] <shaggy2> milamba: ok I'll give it ago
[16:15] <rs0832> aimio, seems like it is attempting to load from the RAM fs
[16:16] <KM0201> Frozenball: i *think* you have to remove ushplash... dn't hold me to that though.
[16:16] <Frozenball> BAZINGA!
[16:16] <KM0201> !info usplash
[16:16] <aimio> yeah i messed up when the build.py came up in the kernalcheck program i closed it to early thats why the maps are messed up :S
[16:16] <FrozenKnight> Thanks KM0201 ! :D I ain't balling yet though :P
[16:17] <rs0832> aimio, k.. so do you have the old kernel?
[16:17] <aimio> and answer to the question you asked no there is no other entry in boot :S (Crap)..
[16:17] <rs0832> aimio, do you have a live cd at hand?
[16:18] <aimio> hmm nope when i installed the ubuntu i used an usb but i think i reformated the usb drive :P
[16:18] <aimio> "epic fail"..
[16:18] <aimio> :P
[16:18] <rs0832> aimio, ok.. try this
[16:18] <FrozenKnight> KM0201:  (o.o) This is strange.. it isn't even installed
[16:18] <rs0832> aimio, if you get the boot menu press
[16:18] <KM0201> Frozenball: usplash isn't?
[16:18] <K9> What file hosting to save files is the best ? i need file storage for long time, i don't want that it' delete files after 30 days
[16:18] <KM0201> ops
[16:18] <KM0201> *oops
[16:18] <rs0832> aimio, 'c' and in the grub shell, type update-grub
[16:18] <KM0201> FrozenKnight: usplash isn't?
[16:18] <FrozenKnight> KM0201: Nope. it isn't :)
[16:19] <KM0201> weird
[16:19] <Frozenball> FrozenKnight, we should totally swap names
[16:19] <mongy> usplash isnt needed
[16:19] <FrozenKnight> KM0201: well in fact it's strange, only sometimes does the splash appear and most of the time it's just blankscreen until it loads.
[16:19] <mongy> K9, ubuntuone?
[16:19] <piyushmishra> yeats: can't find any other
[16:20] <piyushmishra> yeats: I wasn't able to visit sites using facebook connect
[16:20] <coz_> FrozenKnight,   let me check default grub hold on
[16:20] <FrozenKnight> Frozenball: Hehe I still think confusion is bound :P
[16:20] <mongy> FrozenKnight, proprietary drivers installed?
[16:20] <complete> He he lo lo! Do you guys know how often will Linux saved stuff in its write buffer to disk? For example when I mount filesystems over sshfs. I always wonder after I saved "Hmm.. is this saved now or just in the write buffer"?
[16:20] <FrozenKnight> mongy: nope, it's an onboard video card... it doesn't have proprietary drivers.
[16:21] <piyushmishra> yeats: aocbox.co.cc this
[16:21] <coz_> FrozenKnight,    sudo gedit /etc/default/grub
[16:21] <K9> What file hosting to save files is the best ? i need file storage for long time, i don't want that it'll delete files after 30 days. It can be and not for ubuntu only i ned just docs uploads
[16:21] <optik> how do you add something to the default run level, like in gentoo the command for ssh was rc-update add sshd default
[16:21] <mongy> Frozenball, still, plymoutb might not like it, try setting framebuffer
[16:21] <coz_> FrozenKnight,   there is a line you can uncomment    #GRUB_TERMINAL=console
[16:21] <rs0832> aimio, did you get my message? sorry, it git fragmented because i hit return instead of the '
[16:21] <mongy> plymouth*
[16:21] <shinzu> Hi, I'm having problems configuring shares between ubuntu a windows, could anyone help?. I'm getting "Host seems to be down" but when I ping the windows box, it's returning packets
[16:22] <coz_> FrozenKnight,   i would check in #grub channel to be sure   but I believe if you uncomment that you will disable grphical terminal
[16:22] <FrozenKnight> Thanks coz_ :)
[16:22] <mongy> sorry Fzozenball , was meant for FrozenKnight
[16:22] <coz_> FrozenKnight,    you must also  do   sudo  update-grub2  before rebooting
[16:23] <FrozenKnight> mongy: I think I do have framebuffer because the resolution is the monitors resolution while switching to tty1-6
[16:23] <aimio> rs0832 i got it but i'm not sure how i can get to the boot menu etc, beacuse the kernal panic happens right at the start :S i have tried to press something to get into a shell etc or something to be able to type but no luck :S
[16:23] <FrozenKnight> thanks coz_ ! :)
[16:23] <optik> anyone?
[16:23] <sacarlson> shinzu: maybe try install winbind package
[16:23] <FrozenKnight> Thanks FrozenZall :D
[16:23] <rs0832> aimio, you have single boot?
[16:23] <mongy> aimio, hold shift
[16:24] <rs0832> aimio, do ^^ and you should get grub
[16:24] <shinzu> sacarlson: let me check that out
[16:25] <von_Z> Hi! Does anyone know how to get DVD's playing on Xubuntu? Xine says that it wont play encrypted DVD!
[16:25] <aimio> there i am in grub now :d
[16:25] <aimio> happy times :D
[16:25] <mongy> FrozenKnight, echo FRAMEBUFFER=y | sudo tee /etc/initramfs-tools/conf.d/splash   try that
[16:25] <rs0832> aimio, k.. now type update-grub in the grub shell
[16:25] <mongy> FrozenFire, sudo update-initramfs -u afterwards
[16:26] <aimio> i get unknown command update-grub
[16:26] <FKnight> mongy: it echoed FRAMEBUFFER=y
[16:26] <aimio> :S
[16:26] <mitandroid> HI :)
[16:27] <mongy> FKnight, and added it to the file 'splash'
[16:27] <shinzu> sacarlson: I have no idea what to do with that package
[16:27] <FKnight> So that's what it was.
[16:27] <optik> how do you add something to the default run level, like in gentoo the command for ssh was rc-update add sshd default
[16:27] <sacarlson> shinzu: I thought all you had to do is install it?
[16:28] <sacarlson> shinzu: do you use synaptic?
[16:28] <rs0832> aimio, what about update-grub2?
[16:28] <shinzu> sacarlson: I still get host down. By the way, I disabled the firewall on my windows box
[16:28] <FKnight> and the second line might be a "patch" for the kernel? :)
[16:28] <shinzu> sacarlson: I used aptitude
[16:28] <sacarlson> shinzu: that should be fine
[16:28] <aimio> rs0832, nope no luck same message.
[16:28] <mongy> FKnight, ?  no it updates the initramfs, needed to boot.
[16:29] <shinzu> sacarlson: Still getting host down when I try to mount it, any ideas?
[16:29] <FKnight> mongy:  thanks :) bbs. :)
[16:30] <sacarlson> shinzu: well winbind will only help ubuntu find the windows box.  when I have tried to connect to windows xp I need to have a windows account with a password to get it to work
[16:30] <rs0832> aimio, try boot hd0,1
[16:31] <rs0832> aimio, not sure but you can give it a shot
[16:31] <shinzu> sacarlson: I do have the credentials, how do you connect to it
[16:31] <aimio> rs0832, i get error: no loaded kernel :S
[16:31] <rs0832> aimio, type ls and tell me the output
[16:31] <sacarlson> shinzu: are you shareing the files from the windows account with the password?
[16:32] <shinzu> Yes
[16:32] <shinzu> sacarlson: yes
[16:32] <sacarlson> shinzu: well I'm not a windows guy,  I share my files for windows users on my ubuntu
[16:32] <aimio> rs0832, (hd0), (hd0,5), (hd0,1)
[16:32] <Maahes> I'm having a weird problem with two programs in my shell. w3m closes the second I press a button when used to view any web page, but works perfectly fine in pager mode. links2 works fine if I call it directly, but I just installed a little wrapper script designed to feed arguments into a url before it launches, and now links2 behaves exactly like w3m (unless I start it directly)
[16:32] <shinzu> sacarlson: Oh ok, thanks for the help anyway!
[16:32] <PerSeL> hello, how to install google earth?
[16:33] <compdoc> shinzu, when you try to open the windows share, are you using a username and password? does it ask for those?
[16:33] <sacarlson> shinzu: I've had too many problems like you now have, and it has gotten worse in vista and win 7
[16:34] <trojan_spike> PerSeL, google for the 'g-earth' for linux.. Or install worldwind from package manager << open source version ,, like G-earth>> :)
[16:34] <rs0832> aimio, hmm this would be easier if you had a live cd :)
[16:34] <michel_bonn> nabend @all
[16:34] <aimio> rs0832, shall i fix one ?
[16:35] <PerSeL> trojan_spike: I have tried that and installed it shown in ineternet programs but it's not working
[16:35] <aimio> if you can wait ?.
[16:35] <rs0832> aimio, if you can, sure
[16:35] <aimio> ok, i will be back soon..
[16:36] <trojan_spike> PerSeL, i must admit,, ive had that problem aswell,, the open source version works well tho..
[16:36] <shinzu> compdoc: Here's what I did. I edited /etc/hosts and added the IP to the windows box with a name. I created a new directory to mount it on.  Then I edited fstab to be able to mount it, using cifspw for the credentials. Then I entered user/pwd in /etc/cifs (Which I specified in /etc/fstab). And I tried to mount it using sudo mount -a
[16:37] <compdoc> shinzu, before doing all that, just select Places > COnnect to Server, and see if you can log on
[16:37] <rany27> Hi. Im setting a new path PATH=/new/dir:$PATH so I can run exectuables with ''make'' from /new/dir but i get 127 not found on a specific file that is located in /new/dir. What can be the problem?
[16:37] <PerSeL> trojan_spike: where can I find how to install the open source one?
[16:37] <shinzu> compdoc: I tried to, but I'm unable through Connect to Server
[16:38] <compdoc> then you have to fix that first
[16:38] <novitololo> hi
[16:38] <compdoc> the username and password you used exist on the win box?
[16:38] <shinzu> Yes
[16:38] <shinzu> compdoc: Yes
[16:39] <john> how can u if at all install internet explorer on ubuntu
[16:39] <mongy> john, wine and winetricks
[16:39] <mod> happy new year all
[16:39] <iceflatline> wine
[16:39] <JasonSX> Happy New Year!
[16:40] <compdoc> shinzu, on the win box, in properties for the local area network, is windows file sharing installed and active?
[16:40] <trojan_spike> PerSeL, ubuntu software centre,, search 'worldwind' >> 3D Virtual globe
[16:40] <john> ok thought so just wanted to make shue thanks
[16:40] <mongy> john, playonlinux can also do the task
[16:41] <mod> In the last few days when I do my first login after booting (10.10) my panels are gray and opaque, all my hot keys don't work.  If I log out and then back in, they work as expected once again
[16:41] <john> cool
[16:41] <PerSeL> trojan_spike: is it works as google earth?
[16:41] <shinzu> compdoc: Yes, it's active
[16:41] <rany27> Hi. Im setting a new path PATH=/new/dir:$PATH so I can run exectuables with ''make'' from /new/dir but i get 127 not found on a specific file that is located in /new/dir. What can be the problem?
[16:41] <trojan_spike> PerSeL, pretty much,, no geo tag etc tho
[16:41] <JasonSX> quit
[16:41] <coz_> mod,   under circimstances like this... the first troubleshooting I would do is     sudo apt-get update && sudo apt-get dist-upgrade
[16:41] <sacarlson> shinzu: after all that I missed what version the windows side is?
[16:41] <mod> rany, did you export?
[16:42] <rs0832> PerSeL, trojan_spike you need to install the 'lsb' package for google earth to work
[16:42] <trojan_spike> PerSeL, u could always search the forum on how to get G-earth onto ubuntu BTW
[16:42] <mod> coz.. yeah... he ok.  sounds like it came from updating/upgrading
[16:42] <PerSeL> rs0832: how do I do that?
[16:42] <trojan_spike> rs0832, lsb?
[16:42] <Maahes> I'm having a weird problem with two programs in my shell. w3m closes the second I press a button when used to view any web page, but works perfectly fine in pager mode. links2 works fine if I call it directly, but I just installed a little wrapper script designed to feed arguments into a url before it launches, and now links2 behaves exactly like w3m (unless I start it directly)
[16:42] <shinzu> sacarlson: Windows Xp =)
[16:42] <compdoc> shinzu, in win XP, theres a thing called simple file sharing - you might google how to turn that off, and then google about sharing with windows XP
[16:42] <mod> coz, oh hmm it might have started after adding getdeb
[16:43] <piyushmishra> can anyone open bettercodes.org
[16:43] <rs0832> PerSeL, trojan_spike yes... it is in synaptic... you can install from there (linux standard base/ packagename is lsb)
[16:43] <em> is there an upstream kernel ppa?  I think I found a bug in the ubuntu kernel.
[16:43] <compdoc> piyushmishra, yes
[16:44] <KM0201> trojan_spike: only issue w/ Worldwind(at least for me) is it is considerably slower than google earth
[16:44] <piyushmishra> compdoc: I can't. also can't open jquery.com. is there facebook connect on that site?
[16:44] <trojan_spike> rs0832, that should surely come installed already
[16:44] <compdoc> no idea
[16:44] <PerSeL> rs0832: lsb-base is installed on my ubuntu
[16:44] <rs0832> PerSeL, trojan_spike well, it didnt.. for me and 2 other guys.. installing it worked for all 3 of us
[16:44] <piyushmishra> compdoc: why can't I visit sites?
[16:44] <mod> mx.archive.ubuntu.com always fail to resolve on apt-get update
[16:45] <rs0832> PerSeL, what about lsb?
[16:45] <compdoc> piyushmishra, you cant on ubuntu or on the win box?
[16:45] <compdoc> ooops
[16:45] <KM0201> PerSeL: you need lsb-core   that's what makes google earthw ork
[16:45] <piyushmishra> compdoc:  I can't on ubuntu
[16:45] <compdoc> sorry - got you confused for a sec
[16:45] <shinzu> compdoc: Simple file sharing is turned off from before
[16:46] <TyrantElf> How do I get HDMI video to work? I'm using a radeon HD 4670 graphics card and everything shows up until the x server starts, and then the HDMI output stops
[16:46] <PerSeL> rs0832 KM0201 ok Installing now
[16:46] <rs0832> PerSeL, trojan_spike what KM0201 said exactly... lsb installs lsb-core as a dependancy
[16:46] <KM0201> PerSeL: it should work fine after you instal that.
[16:47] <KM0201> rs0832: i don't know if it installs it as a dependency, but i know google earth depends on lsb-core
[16:47] <trojan_spike> KM0201, ty
[16:47] <kleopatra> Hallo ich habe eben Ubuntu 10.10 64bit auf meinem Rechenr installiert, leider kann ich nun Windows nicht mehr starten, es erscheint kein Auswahlmenu am Anfang. WIe kann ich das beheben?
[16:47] <rs0832> KM0201, right , well it did for me anyway :)
[16:47] <KM0201> !de | kleopatra
[16:48] <compdoc> piyushmishra, open a terminal window, and type: sudo route -n
[16:48] <piyushmishra> compdoc: yup done
[16:48] <kleopatra> in english: i just installed u 10.10 64bit on my system. now my windows will not start anymore no menu from which i could choose appears at startup. What should i do?
[16:48] <ge2x> hey there! where did the irc client from Ubuntu 10.10 go?
[16:49] <rs0832> KM0201, or was it the other way round o.o... now i'm confused :D... will check again
[16:49] <rany27> Im setting a new path PATH=/newfolder/:$PATH and export it. I run make in order to comile some program and i get 127 not found for a specific file that is located under /newfolder. What can be the problem?
[16:49] <Flatz> OK noob question here.  I've installed various versions of Ubuntu from 6 on up to my current 10.04.  I don't understand why some installs allow me to view all windows shares on my local network (very basic home network) and some like current when I choose windows netwrok, I get nothing.  I've never user Samba
[16:49] <KM0201> ge2x: it's not included anymore... you can install it from the repos... empathy is the default chat/irc client.. even though it sucks for irc.
[16:49] <josh1> I am currently using pulseaudio to change the playback device from my internal speakers to a bluetooth device. Is there anything easier to use than the pulseaudio volume control app?
[16:50] <compdoc> piyushmishra, the bottom line should have a ip address, which is your gateway - is it there? what is the ip address?
[16:50] <piyushmishra> kleopatra: I https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows
[16:51] <piyushmishra> compdoc:  yes its there
[16:51] <compdoc> shinzu, your problem is your windows sharing setup. if you right click the shared folder and get properties, theres a Permissions button - is there??
[16:51] <KM0201> rs0832: :), like i said, i'm not sure which is which, just know that lsb-core is absolutely required for google earth.
[16:51] <piyushmishra> compdoc:  its 117.200.224.1
[16:51] <raptured> Hi I am running Ubuntu 10.10 from the alternate install cd and I did a system updated. After the system update the transition to the screen saver is not smooth. The screen blinks/flickers into the screen saver. Does anyone have any idea why this transition is not smooth anymore? I did disable Compiz but it made no difference
[16:51] <^Phantom^> How do I nab a screenshot of just one window.
[16:51] <ge2x> Hey guys! When building binutils I get Error 2. Should this happen?
[16:51] <^Phantom^> I can't seem to get anything but the entire desktop.
[16:51] <kleopatra> piyushmishra: dont want to recover ubuntu want to recover windows
[16:51] <compdoc> piyushmishra, you dont use a router or modem?
[16:51] <shinzu> compdoc: Yep, I just checked the permissions and they are all fine, I don't have a clue what's going on
[16:51] <country0129> Thought I'd come back, and if anyone tried to help me with my networking problem Ubuntu/Windows 7, I fixed it.
[16:51] <piyushmishra> kleopatra: its almost the same process
[16:51] <KM0201> kleopatra: well, firsst the easy step, type 'sudo update-grub"in a terimnal
[16:52] <piyushmishra> compdoc: I use a modem
[16:52] <compdoc> shinzu, in the permissions button, thre should be just one user: Everyone
[16:52] <rs0832> KM0201, yes me too. but i do agree with you about lsb-core.. i am sure thats what the dependancy is.. oh and Happy New Year
[16:52] <compdoc> and Everyone should have the 3 choices checked
[16:52] <kleopatra> KM0201: done now: but no windows found
[16:53] <piyushmishra> compdoc: but its not an issue with that am sure coz I use windows also on the same machine and that connects easily to all those sites
[16:53] <KM0201> rs0832: lol, likewise... by the way, the guy w/ the broadcom problem that was here yesterday.. i think you were here for part of it... it was a router problem..lol, he PM'd me, and we reset his router and went through setting everything up and it worked perfectly
[16:53] <kleopatra> Found linux image: /boot/vmlinuz-2.6.35-22-generic
[16:53] <kleopatra> Found initrd image: /boot/initrd.img-2.6.35-22-generic
[16:53] <compdoc> piyushmishra, is the modem a bridge? you seem to be using real ip addresses, rather than private IP addresses.
[16:53] <kleopatra> Found memtest86+ image: /boot/memtest86+.bin
[16:53] <kleopatra> ls: Zugriff auf /media/2262053D62051767/boot
[16:53] <FloodBot4> kleopatra: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[16:53] <KM0201> kleopatra: i trust you when you say its not there..
[16:53] <rs0832> KM0201, ah ok.. thats great :)
[16:53] <piyushmishra> compdoc:  yup the modem's a bridge I dial from my pc
[16:53] <compdoc> piyushmishra, then whats the gateway IP on the windows machine?
[16:53] <shinzu> compdoc: There's one, It has full access
[16:54] <KM0201> rs0832: if i had to guess, he had MAC filtering on, but he lost his password to log into the router, thus requiring the reset to get everything to co-operate
[16:54] <moos> f.u.k u
[16:54] <compdoc> piyushmishra, ok, so youre machines use static ips from your isp
[16:54] <piyushmishra> compdoc:  you mean the ip of my router/modem in my local network?
[16:54] <mongy> !language | moos
[16:54] <KM0201> kleopatra: did you install grub on the MBR?
[16:55] <kleopatra> well what could i do? resuld of parted -l   : http://pastebin.com/0eyZ8sr8
[16:55] <^Phantom^> hey, I have good news
[16:55] <rs0832> KM0201, oh ok.. i asked him about it but i dont know if it was me, i couldnt get him to understand what i meant :).. but
[16:55] <^Phantom^> I have put some of my christmas money away into a "RAM fund"
[16:55] <kleopatra> KM0201: dont even know how to do this
[16:55] <^Phantom^> When I have enough saved up, I'll get the new ram
[16:55] <^Phantom^> and ubuntu will go on my laptop ^_^
[16:55] <compdoc> piyushmishra, you dont use a private lan subnet like 192.168.0.0/24 ?
[16:55] <piyushmishra> compdoc: not static actually we get a new one after each reconnection but yup you can access me directly form that ip
[16:55] <moos> why red
[16:55] <KM0201> rs0832: yeah, it was easy once we got into his router, then set everything up again.
[16:56] <compdoc> piyushmishra, is the subnet address the same on both machines?
[16:56] <piyushmishra> compdoc:  my router ip is 192.168.7.1 and my pc ip is 192.168.1.119
[16:56] <compdoc> see, thats weird
[16:56] <KM0201> kleopatra: well, it looks like your xp partition is still there.
[16:56] <rs0832> KM0201, k good thing it's finally solved.. i don't even remember where i left off with him :D
[16:56] <KM0201> lol.. he was here a while, might have been one of your all nighters
[16:56] <piyushmishra> compdoc:  both machines as in my router and my pc both are 255.255.0.0
[16:56] <rs0832> KM0201, now i have to figure out whats up with my cable
[16:57] <kleopatra> just going for reboot lets see what happens
[16:57] <compdoc> if thats the case, your pc should not be using 117.200.224.1 as a gateway
[16:57] <compdoc> 255.255.0.0 is odd too
[16:57] <compdoc> the router ip should be the gateway address on all machines
[16:58] <rs0832> KM0201, yes he was :) .. i really think these companies should have more support for drivers for their devices... his router manual and drivers were only for a very old version of ubuntu
[16:59] <piyushmishra> compdoc: windows is on the same machine I access it with reboot- grub and I have put the router ip in gateway for the DSL connection where I dial am not sure why its not using that ip
[16:59] <KM0201> rs0832: yup...
[16:59] <compdoc> oooh - its dual boot?
[16:59] <compdoc> I thought you had two seperate computers
[17:00] <piyushmishra> compdoc:  I see 4 destination-gateway and in first 117.200.224.1 n gateway 0.0.0.0
[17:00] <piyushmishra> last one is just the opposite
[17:00] <piyushmishra> second destination is 169.254.0.0 n gateway0.0.0.0
[17:00] <piyushmishra> third 192.168.0.0 n gateway 0.0.0.0
[17:01] <piyushmishra> compdoc^
[17:01] <compdoc> thats seems all wrong
[17:01] <tonsofpcs> very wrong.
[17:02] <piyushmishra> compdoc: how do I fix it? and lol I use rest of the internet with those settings including this chat
[17:02] <shubbar> where can i get someone to configure an ubuntu server for me?
[17:02] <KM0201> kleopatra: did it work?
[17:02] <rs0832> hmm i thought that the 117.200 range was for external ip;s
[17:02] <nickel1010> Would anyone mind helping me with installing proprietary wireless drivers via the terminal?
[17:02] <compdoc> piyushmishra, can you boot into the windows OS and log back in here?
[17:03] <piyushmishra> the last one is destination 0.0.0.0 and gateway 117.20.224.1
[17:03] <compdoc> its dual boot, yes?
[17:03] <Dr_Willis> nickel1010:  theres the jockey-text tool that might automate that for you.
[17:03] <qwd> When starting Ubuntu I have to type in a password to unlock gnome keyring(?), is there a way to have it unlocked right away?
[17:03] <piyushmishra> compdoc:  I can but I gotta install IRC client on win
[17:03] <nickel1010> Jockey-Text tool?
[17:03] <shinzu> I'm still getting "mount error(112): Host is down". But I can ping fine.. I don't understand
[17:03] <Dr_Willis> qwd:  system -> preferances -> passwords and enc. right click on login. s4et a blank password
[17:04] <piyushmishra> compdoc:  is there any web client for irc?
[17:04] <Dr_Willis> qwd:  or if ya cant find the icon. run 'seahorse'
[17:04] <compdoc> piyushmishra, well, log into windows, and open a dos windows and type:  ipconfig /all
[17:04] <compdoc> then come back
[17:04] <qwd> Dr_Willis: no not for login, it's for unlocking the keyring containing saved passwords
[17:04] <Dr_Willis> qwd:  yes... this IS for teh keyring password..
[17:04] <piyushmishra> compdoc:  ok I'll keep that data
[17:04] <qwd> Dr_Willis: ah, thanks :)
[17:04] <compdoc> make sure you can surf ect while in windows
[17:05] <compdoc> make sure your internet works, I mean
[17:05] <piyushmishra> compdoc: I can lol :) yes
[17:06] <nickel1010> Would it be allright to ask for some assistance concerning the latest XBMC Live distro? Considering it's based on Ubuntu.
[17:07] <Dr_Willis> nickel1010:  they should have their own support channels and forums..
[17:07] <Dr_Willis> nickel1010:  since we have no idea what changes they have done to the ubuntu core.
[17:08] <PerSeL> KM0201: thanks everything is working now
[17:08] <shinzu> How can be so hard to share files..
[17:08] <compdoc> heh
[17:08] <compdoc> sorry it hard
[17:08] <KM0201> PerSeL: no prob.. google would have turned that one up pretty quick though... i've dealt w/ it quite a few times.
[17:08] <sda1986> salve! I have a question, I started a program on terminal with & at the end, now if i close the terminal my program die, how can I de-attach the son process from father process?
[17:09] <tim> hi, after a hard freeze, i cannot boot my workstation any more. the last message is: EXT4-fs (sda1): re-mounted. Opts: error=remount-ro
[17:09] <compdoc> tim, ouch
[17:09] <^Phantom^> is there any way to permanently disable update manager
[17:09] <^Phantom^> it's useless and won't install updates for me
[17:09] <FrozenKnight> Thanks KM0201 mongy . It works now.
[17:10] <tim> compdoc: that's what i thought as well :/
[17:10] <rs0832> sda1986, :) it is called a child process and parent process.. you can run the program by pressing alt-f2 and running the command from there..
[17:10] <mongy> ^Phantom^,  startup applications, untick
[17:10] <^Phantom^> Sweet, thankies.
[17:10] <^Phantom^> I don't really have use for it in my VM, per se
[17:11] <ulk> salut
[17:11] <sda1986> rs0832, but if the process you have to start is gnome-panel you cannot, so i start it from terminal with & at the end and then i do "disown"
[17:11] <sda1986> rs0832,  so i can close the terminal without kill the son
[17:12] <aimio> rs0832, i am back, i have a live cd ready now.
[17:12] <Auriga> Howdy...
[17:12] <Auriga> Anyone using Slitaz in a VirtualBox setup?
[17:13] <piyushmishra> compdoc: I booted into windows twice n tried that
[17:13] <compdoc> piyushmishra, place in http://pastebin.com/
[17:13] <rs0832> aimio, ok have you booted into it?
[17:13] <compdoc> the results of ipconfig /all
[17:13] <sherry> I recently installed 10.10 on Toshiba Satellite A215-S5849 with the ath5k wireless and encountered a bug where it will not find or connect to wireless networks and I get an error about "gain calibration timeout" on the console. Looks like bug #610440 to me. Can anyone suggest a work around, or the most recent version that is working on this wireless chipset?
[17:13] <sda1986> rthanks
[17:13] <evon> I set up a flexshare in clearos that I am able to access via windows network in nautilus.  However I would like to mount this share into a directory so that other programs can access the files over the network.  For example,  openoffice cannot navigate the network folder right.  I would like it and other programs to be able to
[17:14] <piyushmishra> compdoc: it's the same thing there too just the ip changes like I said but its always the same thing ip is the default agteway though I see 2 DNS ips also which aren't here on ubuntu
[17:14] <evon> I set up a flexshare in clearos that I am able to access via windows network in nautilus.  However I would like to mount this share into a directory so that other programs can access the files over the network.  For example,  openoffice cannot navigate the network folder right.  I would like it and other programs to be able to.
[17:14] <compdoc> you do need the dns servers
[17:14] <rs0832> aimio, boot into it and mount you the partition where ubuntu is installed
[17:14] <aimio> yeah i get the welcome page try or install ubuntu etc etc..
[17:14] <piyushmishra> compdoc:  am back on ubuntu and so can't pastebin but I remember the ips if you want
[17:15] <Waligrucha> elo
[17:15] <compdoc> well, whats the ip address, the gateway address, the subnet address, and the dns addresses on the windows box. thats all I was looking for
[17:15] <Waligrucha> chuje\
[17:15] <a_> :D
[17:15] <Waligrucha> jestescie?
[17:16] <Waligrucha> www.redtube.com
[17:16] <a_> nie kurwa, nie ma nas
[17:16] <Waligrucha> fap fap fap
[17:16] <piyushmishra> compdoc ip n gateway was 117.200.255.85 once and 224.13 the second time
[17:16] <a_> a
[17:16] <Waligrucha> c
[17:16] <a_> na redtube nadal jest świąteczne logo?
[17:16] <Waligrucha> chuje pedalki
[17:16] <Waligrucha> wpierdola chcecie?
[17:16] <xangua> Waligrucha: stop that
[17:16] <a_> tak kurwa
[17:16] <Waligrucha> bo co kurwa?
[17:16] <Waligrucha> synku
[17:16] <Waligrucha> jebane
[17:16] <compdoc> the second time? it shows two gateways?
[17:16] <Waligrucha> skurwiele
[17:16] <FloodBot4> Waligrucha: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[17:17] <Waligrucha> fuck you!
[17:17] <rs0832> Waligrucha, proszę nie spam tutaj
[17:17] <rs0832> Listen
[17:17] <piyushmishra> compdoc: no I booted into windows twice by mistake
[17:17] <xangua> !ops | Waligrucha
[17:17] <Waligrucha> fucking noobs
[17:17] <a_> kurwa, zajebisty ping masz
[17:17] <Auriga> Lol...
[17:17] <Waligrucha> gupie noby
[17:17] <a_> dleczego ich wyzywasz od chujów?
[17:17] <Auriga> Waligrucha you don't happen to be using Slitaz do you?
[17:18] <Waligrucha> bo nimi jestescie :D
[17:18] <piyushmishra> compdoc: how do we mute this guy? Waligrucha
[17:18] <Tm_T> Waligrucha: a_: stop now
[17:18] <a_> ja wiem, że to pedały, ale czym cię tak rozwścieczyli?
[17:18] <Waligrucha> a tak pozatym to mnie dziewczyna rzucila
[17:18] <compdoc> well, thats fine, I still need to know exactly: whats the ip address, the gateway address, the subnet address, and the dns addresses on the windows box. use http://pastebin.com/ and /sg me the url if you dont want everyone to know
[17:18] <Amaranth> English only here please.
[17:18] <Waligrucha> i sie wyzywam:)
[17:18] <a_> współczuję :)
[17:18] <Waligrucha> fuck english polish rox
[17:18] <compdoc> */msg me I meant
[17:18] <evon> Amaranth: are you able to help me?
[17:18] <a_> ojoj...
[17:19] <a_> a tak miło było
[17:19] <kleopatra> omniuni: dont knwo what to do ...
[17:20] <rs0832> evon, do you need help?
[17:21] <campbellgolf> in xchat, is there a way I can see my previous chat history for my current tunning session?
[17:21] <evon> rs0832: I set up a flexshare in clearos that I am able to access via windows network in nautilus.  However I would like to mount this share into a directory so that other programs can access the files over the network.  For example,  openoffice cannot navigate the network folder right.  I would like it and other programs to be able to
[17:21] <campbellgolf> .. sp.. running session
[17:21] <Amaranth> evon: If nautilus sees the share openoffice should be able to access it via a folder in ~/.gvfs/
[17:22] <Amaranth> evon: gvfs sets up fuse mounts in ~/.gvfs/ for everything you mount in nautilus that isn't a normal filesystem
[17:22] <IdleOne> campbellgolf: in xchat, Settings > Prefs > Logging check the box Display scroll back from previous session.
[17:23] <guntbert> campbellgolf: and you can set xchat to log channels
[17:23] <The_Maverick> hello im having some trouble playing movies. think anyone can help?
[17:23] <campbellgolf> IdleOne thanks again
[17:23] <IdleOne> campbellgolf: sure thing
[17:23] <campbellgolf> guntbert got it! thnx
[17:24] <guntbert> campbellgolf: :)
[17:24] <bonjoyee> The_Maverick: what trouble? please explain
[17:24] <aimio> rs0832, i think i have mounted the drive, what should i do know ?
[17:24] <shinzu> compdoc: I set up an ubuntu share and it works
[17:24] <rs0832> aimio, check if you have more than one kernel in /boot
[17:25] <IdleOne> campbellgolf: if you want your logs to be saved Network/year/month/day use %n/%Y/%m/%d/%c.log
[17:25] <The_Maverick> i have the restricted extras and vlc and neither of them will play movies
[17:25] <rs0832> aimio, the kernels have their version in the file names..
[17:26] <Spoon37> sosad... HoN doesn't support Intel gfx cards
[17:26] <aimio> i have one generic and the other is candela..
[17:26] <bonjoyee> The_Maverick: did u try playing those movies from terminal? any errors?
[17:26] <rs0832> aimio, you can ls the directory and paste i
[17:27] <The_Maverick> bonjoyee not sure how to do that
[17:27] <campbellgolf> IdleOne looks like default %b %d %H:%M:%S  will work
[17:27] <bonjoyee> The_Maverick: try vlc /path/to/movie.avi from a terminal
[17:27] <IdleOne> campbellgolf: whatever you prefer :)
[17:28] <compdoc> shinzu, yeah, its a windows sharing problem, and I dont have a windows xp box to test with. you have to solve that in a windows xp help channel
[17:28] <The_Maverick> bonjoyee why would opening the movie through vlc and opening it through a terminal be different?
[17:29] <campbellgolf> anyone work with a BitNami NATIVE install?
[17:29] <rs0832> The_Maverick, you get error output in a terminal if any.. you dont get it otherwise
[17:29] <trojan_spike> The_Maverick, what format is the movie?
[17:29] <bonjoyee> The_Maverick: through a terminal..you can find some debug messages
[17:29] <campbellgolf> I've ran the installer.bin and went through the wizard setup for subversion..
[17:29] <Barami> Hello :)
[17:29] <campbellgolf> but nothing show up when I run the command "svn --version"
[17:29] <evon> Amaranth:  where is that directory. Openoffice was just an example. other programs can't see the mount
[17:30] <campbellgolf> or subversion --version
[17:30] <evon> Amaranth:  where is the gvfs directory?
[17:30] <Barami> Who know about rhythmbox with music player device?
[17:30] <Amaranth> evon: ~/.gvfs/
[17:30] <The_Maverick> bonjoyee idk. how do i check? is it filesystem type?
[17:30] <Barami> I want to change bitrate while converting music.
[17:30] <evon> Amaranth:  ~?
[17:30] <numberto> Hello everybody, I have an Acer netbook with 160 gigs of storage. The problem is that I can access only 150G the other 10G have the back of windows (by default).  And there is not a single program under ubuntu which found it. (well fdisk sees 160 gigs but not that hidden partition).
[17:31] <Amaranth> evon: ~ means your home directory, something like /home/evon/
[17:31] <evon> Amaranth: oh ok thanks
[17:31] <Amaranth> evon: so /home/evon/.gvfs/ (the . makes it a hidden directory, you need to make the file browser in your app show hidden files)
[17:31] <TyrantElf> Hello everyone, can I have some help getting HDMI video to work? I'm using a radeon HD 4670 graphics card and everything shows up until the x server starts, and then the HDMI output stops
[17:32] <The_Maverick> bonjoyee now it works for absolutely no reason at all what so ever in vlc
[17:32] <evon> Amaranth: thanks got it done.
[17:32] <rs0832> bonjoyee, did the demultiplexer work out for you?
[17:32] <evon> numberto: I would leave that hidden partition alone
[17:33] <evon> numberto: just in case you want to go back to windows
[17:33] <evon> numberto: or want to sell it
[17:33] <bonjoyee> rs0832: nope..actually the files so huge..it just stalls the system
[17:33] <evon> numberto: But gparted will see and let you edit the partition
[17:33] <rs0832> bonjoyee, oh im sorry about that
[17:34] <evon> numberto: But again 10gig isn't that much, I personally would leave it alone
[17:34] <Barami> Who can teach me a way of changing bitrate when transfer music to mp3 device?
[17:34] <bonjoyee> rs0832: also ...what demux will do is give me separate audio/video streams right?
[17:34] <rs0832> bonjoyee, yes, if the mpg you got is muxed
[17:35] <bonjoyee> rs0832: but what i want is to detect scene changes and split the video at that point...and repeat the process for the entire file
[17:35] <numberto> evon: you are right, but I guess it is slightly corrupted. Because when I were using windows (when I bought it) I found a program that found it and I guess it corrupted it. Now under my windows I cannot even use it to repair my system -  so there is no need for it.
[17:35] <rs0832> bonjoyee, since you mentioned that it still had the metadata, i suggested it
[17:35] <TyrantElf> HELLO!! can I have a little help?
[17:35] <rs0832> bonjoyee, scene changes?
[17:36] <evon> numberto: LOL. ok then. I've used Gparted before and it sees the partition but I admit that I've never tried to edit it. Try Gparted and see what happens
[17:36] <sherry> What is the most recent version working on AR5XXX wireless chipsets? Do I need to go back to 10.04 to get a working ath5k, or is there a kernel available in 10.10 that works with this chipset?
[17:36] <bonjoyee> rs0832: yes..as i said the huge video file is actually a number of smaller video files merged during the recovery..
[17:37] <rs0832> bonjoyee, yep.. btw, did it actually finish the recovery completely?
[17:37] <numberto> evon: Gparted does not see it
[17:37] <bonjoyee> rs0832: so if a software can detect scene changes...that can help ..is suppose..
[17:38] <rs0832> bonjoyee, what kind of (scene) changes?
[17:38] <bonjoyee> rs0832: yes it did..it scanned the entire 30gb hdd of the handycam..and produced a 27gb mpeg video!
[17:38] <evon> numberto: sudo fdisk -l?
[17:38] <porkchop_> why do i keep getting this message?
[17:39] <porkchop_> Err http://ppa.launchpad.net maverick Release.gpg
[17:39] <porkchop_>   Something wicked happened resolving 'ppa.launchpad.net:http' (-5 - No address associated with hostname)
[17:39] <ThomasB2k> I get that too, porkchop_
[17:39] <rs0832> porkchop_, change your dns servers :D
[17:39] <porkchop_> how do i change my dns server?
[17:40] <rs0832> porkchop_, ThomasB2k in /etc/resolv.conf change the line:nameserver x.x.x.x to nameserver 208.67.222.222
[17:40] <ThomasB2k> what IP is that to?
[17:40] <ThomasB2k> and thanks
[17:40] <Spoon37> away reason: food [amsg]
[17:40] <rs0832> porkchop_, ThomasB2k x.x.x.x means the ip address that is already in the file. replace it with 208.67.222.222
[17:41] <ThomasB2k> Yes, thanks rs0832, I figured that
[17:41] <rs0832> ThomasB2k, that is the ip for a dns server
[17:41] <rs0832> ThomasB2k, are you using comcast?
[17:41] <Gunni> hey since i did an update i keep getting "No init found. Try passing initÖ bootarg.
[17:41] <ThomasB2k> No, I'm using a Tier 2 ISP from AT&T, rs0832
[17:42] <wildc4rd> afternoon/evening all!
[17:42] <rs0832> ThomasB2k, hmm ok.. still, you can try the change. it should work
[17:42] <Gunni> what can i do?
[17:42] <ThomasB2k> Thank you rs0832, i'm assuming I have to restart before it makes the change.
[17:43] <JackOfHearts> any one got problems with flash + chrome ?
[17:43] <rs0832> ThomasB2k, i doubt it.. try it out first to see if it worked. if it doesnt, then restart
[17:43] <JackOfHearts> with ubu 10.10
[17:43] <porkchop_> Thanks rs0832 :-)
[17:43] <rs0832> porkchop_, :) yw
[17:43] <bonjoyee> rs0832: have u noticed when playing a file in mplayer...through a terminal...it displays time as A: and V: for audio/video streams?
[17:44] <ThomasB2k> It worked :), only an error with a covergloobus PPA now. Thank you.
[17:44] <porkchop_> is flash any better on 32 bit?
[17:44] <rs0832> ThomasB2k, :)
[17:44] <rs0832> bonjoyee, hmm i havent used mplayer more than once.. why?
[17:44] <Nephy> hey ..got a crappy problem , I had debian on my pc and tried to install ubuntu,I got an error so i had to reboot the pc and now when i hit try ubuntu or install after a few second it stucks
[17:44] <porkchop_> every time i try to go full screen on a video it freezes but continues to play audio
[17:44] <numberto> evon: it still does not show it -  http://pastebin.com/SPr4zUpp
[17:44] <JackOfHearts> porkchop_:  on my  32 bit chrome and flash works rly crap
[17:44] <Nephy> the thing is now i cant get past the grub
[17:45] <Nephy> any suggestions what i can to do get past grub rescue ?
[17:45] <JackOfHearts> nephyr what couse problems ?
[17:45] <porkchop_> hmmm...guess we will never have decent flash support in Linux
[17:45] <rs0832> Nephy, what is the error?
[17:45] <Nephy> I dont know ..it just stucks
[17:45] <avg_guy> whats the command to see what drive is what in the terminal?
[17:45] <bonjoyee> rs0832: when I play this file in terminal using mplayer....it displays the times for that clip...then resets to 0 for the next one...that means mplayer somehow detects that this huge file actuall contains small individual files..
[17:46] <quebecois> Quelqu'un parle français?
[17:46] <rs0832> porkchop_, which version are you using?
[17:46] <Nephy> I just have to get past the grub to windows
[17:46] <rs0832> bonjoyee, yes :) thats the reason i suggested the demuxer actually
[17:46] <bonjoyee> rs0832: i just wonder if i can use this ability of mplayer to  split the files..!
[17:46] <This_Guy> What exactly do the colors in bash indicate? Sorry if I'm not in the right area to be asking this :|
[17:46] <JackOfHearts> rs0832:  i got flash non free latest and still chrome and flash crashing on most video players like flplayer or whatever
[17:46] <JackOfHearts>  when i make fullscreen
[17:47] <JackOfHearts> its strange enveer before got such problems with flash
[17:47] <rs0832> JackOfHearts, 64 bit?
[17:47] <{> hi everybosy
[17:47] <JackOfHearts> rs0832: 32
[17:47] <JackOfHearts> bit
[17:47] <porkchop_> rs0932 have used 64 bit square, but they discontinued that....I think Chromium comes with 32 flash no?
[17:47] <rs0832> JackOfHearts, which version?
[17:47] <KM0201> thank goodness, that was the most annoying username ever
[17:47] <TyrantElf> I'm try to set up dual monitors with the HDMI and VGA outputs on my graphics card and i'm having some touble, can someone help?
[17:48] <guntbert> This_Guy: see http://www.cyberciti.biz/tips/where-is-color-of-ls-command-defined.html
[17:48] <TyrantElf> I'm using a radeon HD 4670 graphics card and everything shows up until the x server starts, and then the HDMI output stops.  Does anyone know how to get it to work?
[17:48] <Nephy> no one knows how i can get past the grub rescue ?
[17:48] <JackOfHearts> rs0832: 10.1.102
[17:48] <rs0832> porkchop_, discontinued? i dont think so.. but if you are using 64bit ubuntu, i suggest using 64bit flashplayer..
[17:48] <rs0832> JackOfHearts, hmm i havent experienced this.. but i guess you can try updating it if there is an update
[17:48] <daxt> who is running xen on ubuntu desktop ?
[17:48] <JackOfHearts> rs0832: + google chrome 10.0.612
[17:49] <Gunni> hey since i did an update i keep getting "No init found. Try passing init= bootarg."
[17:49] <JackOfHearts> i got system up to date
[17:49] <porkchop_> rs0832 i looked up 64 bit native flash in linux and adobe site says it is no longer supporting the project at this time
[17:49] <bonjoyee> porkchop_: flash 64bit square is certainly available..im using the preview 3..
[17:49] <This_Guy> guntbert, Thanks. I should have searched longer.
[17:49] <MrUnagi> how can i block sftp access
[17:49] <porkchop_> bonjoyee can you link that?
[17:49] <daxt> anybody using xen on ubuntu desktop ?
[17:49] <guntbert> This_Guy: no problem :)
[17:49] <rs0832> porkchop_, ^^ the 'square' replaced the 64 bit version but it is still there
[17:49] <home-alone> hi . i am looking for a simple video editing app
[17:49] <Auriga> Daxt, who isn't using Ubuntu?
[17:50] <TyrantElf> My grandma could help me more than you people.....
[17:50] <Auriga> ... On, not or... Sorry I can't read english...
[17:50] <porkchop_> thanks rs0832
[17:50] <rs0832> home-alone, you can use an nle like pitivi or avidemux
[17:50] <rs0832> TyrantElf, :)
[17:50] <{maste-server}> somebode using ipcoop?|
[17:50] <daxt> Auriga , i want to install xen hypervisor on my ubuntu desktop , coz i am fed up with VirtualBox
[17:50] <daxt> who can help me out in this case ?
[17:50] <TyrantElf> rs0832, yeah, really funny...
[17:50] <rs0832> TyrantElf, please have patience.. maybe no one here has an answer... i know i dont
[17:50] <Auriga> What's wrong with VB?
[17:51] <home-alone> I need it to add subtitle mix music to YT upload
[17:51] <rs0832> porkchop_, :)
[17:51] <daxt> xen is more efficient than VB , and VB is owned by Oracle
[17:51] <bonjoyee> porkchop_: http://labs.adobe.com/downloads/flashplayer10_square.html
[17:51] <{maste-server}> :))))
[17:51] <Auriga> Oh you want to create a server?
[17:51] <TyrantElf> rs0832, I've asked about 5 times over the day and your the first person to respond at all....
[17:51] <Auriga> I am now just looking at the Xen page...
[17:52] <MrUnagi> i am beginning to think chrooting sftp is impossible
[17:52] <porkchop_> bonjoyee Thanks!
[17:52] <Auriga> & Daxt you don't like Oracle?
[17:52] <piyushmishra> compdoc: its ubuntu for sure I changed my modem to router mode and now I can open the sites
[17:52] <bonjoyee> porkchop_: :)
[17:52] <daxt> Auriga , as well as closed source software :D
[17:52] <Auriga> Ah okay, I see where you are coming from now.
[17:52] <Auriga> Then you despise Microsoft then?
[17:53] <rs0832> TyrantElf, well, i guess none of the guys who know about that stuff were online today.,. i think there are some who know about it... but havent seen them online today
[17:53] <shcherbak> TyrantElf: verify both motitors (each at the time) with xserver, establish what mode will you use, and is supported by driver, hook up second sceen.
[17:53] <aimio> rs0832, http://pastebin.com/vvYzF2qz (boot ls)...
[17:53] <rs0832> TyrantElf, ah there is one of them :)
[17:53] <daxt> Auriga i only want to use Open Source as much as possible
[17:53] <evon> numberto. sorry man I have no idea then.  Only thing i can think of is to try see the partition by using a bootcd like systemrescuecd
[17:53] <TyrantElf> by verify you mean?
[17:53] <{maste-server}> hi everibody
[17:53] <karthick87> I am using ubuntu 10.04 but about me says that i am running 11.04..Why ??
[17:53] <porkchop_> Bonjoyee, where do i place the .so file? sorry, i'm a newb
[17:53] <Auriga> Daxt, I am trying to do the same thing.
[17:54] <daxt> Auriga that is good for humanity :D
[17:54] <compdoc> piyushmishra, keep it that way - router mode is safer
[17:54] <Auriga> Daxt I just recently moved my torrenting to Linux.
[17:54] <shcherbak> TyrantElf: connect, start system, check available setting (resolution  etc)
[17:54] <rs0832> aimio, hmm try update-grub
[17:54] <Auriga> Next step is work out how to play games in Linux...
[17:54] <compdoc> there is no advantage to bridge mode
[17:54] <KM0201> karthick87: it's an error.... run lsb_release -a in terminal, and it will show what you're using
[17:54] <bonjoyee> porkchop_: ~/.mozilla/plugins or /usr/lib/mozilla/plugins
[17:54] <daxt> i dont play games :D
[17:54] <Auriga> Then you are missing out...
[17:54] <dougl> TyrantElf, what are you trying to do? and is your grandmother here?
[17:54] <piyushmishra> compdoc:  :( I could play no nat aoc on bridge mode
[17:54] <Auriga> Are you too old for games?
[17:54] <karthick87> KM0201: Is it a bug??
[17:54] <rs0832> bonjoyee, maybe you are right about the mplayer... i'll check and let you know if i find anything
[17:54] <orbisvicis> whats ubuntu's /boot/vmlinu*** called, out of curiosity ?
[17:55] <TyrantElf> dougl, verry funny, and I'm trying to get dual monitors to work
[17:55] <shcherbak> dougl: she is having a nap
[17:55] <bonjoyee> rs0832: thanks:)
[17:55] <porkchop_> bonjoyee can i also replace this in chromium?
[17:55] <KM0201> karthick87: no.. somehow the wrong "about" got put into 10.04 and 10.10...
[17:55] <rs0832> bonjoyee, :)
[17:55] <MagicJ> I need to be able to re-boot an unattended machine ona regular basis - so, I put shutdown -r 1 in the crontab for the root - it does not work - why not
[17:55] <Auriga> Daxt have you been to chris pirillo for help?
[17:55] <country0129> Ubuntu connected to a Windows7Pro machine via wireless network.  All working except printing.  Samba4 installed.  Otion to "Windows Printer via Samba" not in New Printer dialog choices.  Printer is Canon IP1800, connected via USB to Windows machine.  What do I need to do to print from Ubuntu?
[17:55] <shcherbak> TyrantElf: do you have ati diver or open?
[17:55] <dougl> TyrantElf, what kind of video cards do you have?
[17:55] <Auriga> Daxt have you been to chris pirillo for help?
[17:55] <TyrantElf> shcherbak, I have checked what both say, but my 22" led tv that I want to hook up with hdmi is shown as a 7"
[17:55] <numberto> evon: thanks, it is not problem. It is just google didn't give me an answer and I wanted to ask if anybody knew.
[17:55] <MagicJ> please ignore my previous question - /sbin/shutdown did it
[17:55] <bonjoyee> porkchop_: the last time i tried chromium..it detected the flash player automatically when placed in /usr/lib/mozilla/plugins
[17:55] <daxt> Auriga nope , i could not find help there
[17:56] <Auriga> Usual thing...
[17:56] <TyrantElf> dougi, a radeon HD 4670 using non-proprietary drivers
[17:56] <Auriga> Chris Pirillo is harder than IRC...
[17:56] <compdoc> piyushmishra, everything works other than those two sites. I wouldnt know what else to look for. Bridge mode is a security risk - anyone can connect directly to your PC
[17:56] <orbisvicis> can someone tell me what the file in /boot starting with "vmlinu" is called (full name) ?
[17:56] <Auriga> Plus they are fanboys too...
[17:56] <orbisvicis> since it differs from distro to distro ?
[17:56] <compdoc> piyushmishra, just switch modes when you want to play the game
[17:56] <rs0832> aimio, did you run update-grub
[17:56] <rs0832> ?
[17:56] <shcherbak> TyrantElf: not screen size, resolution like 1600X900
[17:56] <piyushmishra> compdoc: I won't use the bridge mode now but how do I get cloaked?
[17:57] <compdoc> router mode protects you with nat and maybe a firewall, if the modem has it
[17:57] <aimio> rs0832, i get error: cannot find a device for "/" is dev/mounted?). but it's mounted on dev/sda1.. :S
[17:57] <Nephy> Some help please , how can i get past the grub rescue if the install cd doesnt work and i only have windows installed atm?
[17:57] <piyushmishra> compdoc: not two sites I can now use fb connect on all sites. earlier sites with fb login check were gone
[17:58] <porkchop_> bonjoyee awesome, thanks again
[17:58] <shcherbak> TyrantElf: with open drivers it is going to be... is randr working with your card?
[17:58] <TyrantElf> shcherbak, The resolutions on the hdmi go up tp 1080p and the VGA goes up to 1020*768.
[17:58] <dougl> TyrantElf, sorry I have no experience with the ati but I did the same thing with my tv... ubuntu on one machine on one input of the tv and osx on another machine to a different input on the tv... was just plug and play with a little point and click in an nvidia settings app on the ubuntu
[17:58] <Auriga> Nephy you could remove the hd if it is for data recovery...
[17:58] <bonjoyee> porkchop_: it worked? 32 or 64bit?
[17:58] <compdoc> bridge mode is only useful if you use a static IP, and even then, you should have a router with nat connected to the modem
[17:58] <rs0832> aimio, can you pastebin /boot/grib/grub.cfg?
[17:58] <aimio> one sec
[17:59] <rs0832> aimio, k
[17:59] <compdoc> piyushmishra, whats fb connect?
[17:59] <country0129> Help with network printing?
[18:00] <mneptok> compdoc: bridged mode is also useful if you have a more featureful router behind the modem.
[18:00] <porkchop_> bonjoyee 64 bit, yes works
[18:00] <shcherbak> TyrantElf: i am afraid that would be max on this driver, if there is ati stuff use it to compare, if not check for randr and twinview on open-source driver.
[18:00] <piyushmishra> compdoc: facebook login . sites that used facebook login weren't loading. now they are. strange enough, I was able to use facebook
[18:00] <bonjoyee> porkchop_: ok...glad to help:)
[18:00] <piyushmishra> mneptok:  mine went featureless :P
[18:01] <aimio> rs0832, http://pastebin.com/rfNwm12E
[18:01] <evon> numberto. as a last effort try the gparted or clonezilla live CD
[18:01] <Guest58991> is there  a prob with the 10.10 network - tried kubuntu and ubuntu  and a distro based on it and can't connect eth0 or wlan0
[18:01] <compdoc> piyushmishra, do you use facebook apps? have you accepted any from friends?
[18:01] <kmck> Hello! I'm back and have another question, if i would like to change my splash screen do i just save a .jpg photo to /lib/plymouth/themes and then run the terminal with the sudo command?
[18:01] <mneptok> piyushmishra: ummm .... happy new year?
[18:01] <KM0201> Guest58991: sounds like it's not recognizing your devices for whatever reason...
[18:02] <country0129> Guest59~:  What kind of network are you trying to connect to?
[18:02] <piyushmishra> compdoc:  I use very few apps and am trying to build my first one
[18:02] <piyushmishra> mneptok: happy new year :)
[18:02] <JackOfHearts> btw  any way to run manta webcam ?
[18:02] <Guest58991> KM0201: it does an i can contact AP (router) just not outside it -- all other computers work
[18:02] <compdoc> any facebook apps are a security risk - they suck your info
[18:02] <rs0832> aimio, dont you get the all those options on your boot menu?
[18:03] <shcherbak> kmck: i do not think it is tan simple
[18:03] <shcherbak> *that*
[18:03] <KM0201> Guest58991: then my first thought would be something inside the router that is not allowing it out...
[18:03] <kmck> shcherbak: do you know how to do it?
[18:03] <Auriga> Kmck there is an app that allows you to do it I think...
[18:03] <piyushmishra> compdoc: I am making an app so I can see the amount of data they can take out and now I read all requested permissions and not give away anything
[18:03] <compdoc> good luck with that
[18:03] <kmck> Auriga: do you know the app name?
[18:03] <country0129> Guest58991:  What KIND OF NETWORK are you trying to connect to?  I've had similar problems now fixed.
[18:03] <aimio> yeah i think i do i am not sure.
[18:03] <Guest58991> KM0201: no every other computer can use it
[18:03] <aimio> rs0832, shall i try ?
[18:03] <KM0201> Guest58991: now thats for your ethernet.... your wireless could be a whole other issue.
[18:03] <Auriga> no, just looking for it...
[18:03] <KM0201> Guest58991: so?
[18:04] <piyushmishra> compdoc: lol I don't use a lot of apps so its :)
[18:04] <rs0832> aimio, hold on
[18:04] <TyrantElf> shchbaker, 1080p is the resolution I want, but There is no hdmi video.
[18:04] <Auriga> Kmck... Splash Screen... lol
[18:04] <Guest58991> KM0201: then it's not th router
[18:04] <Auriga> Go to the Software center...
[18:04] <ryan_languagelab> is it possible to tell compiz to not touch an application (in this emacs.... I am getting the window rendered like http://www2.ryankaskel.com/misc/ubuntu/strange_emacs_lines_20110101.png
[18:04] <shcherbak> kmck: i am not using plymouth, so no. But there is severals HOw to's on forum and other sites on subject.
[18:04] <dissillusioned> I'm a fervent believer in the concept behind Linus based operating systems & have tried 3 times over the last 15  years to use one, but everytime I'm confronted by just too many problems, which I don't have with Windows, this time round is no exception, so I'll be reluctantly going back to it once again but with a difference, I've discovered Sandiebox, it offers a degree of safety that means I can use the best of Linux (Firefo
[18:04] <KM0201> Guest58991: i'm amazed you needed to come here, you have all the answers(for what its worth,d ealt w/ this yesterday, and it WAS the router)
[18:04] <JackOfHearts> lsusb shows Bus 002 Device 002: ID 18ec:3188 Arkmicro Technologies Inc.  so its detected but still cheese dotn show anything same skype
[18:04] <shcherbak> !plymouth
[18:05] <Nubulis> Hello, I'm running kubuntu 10.10 I'm having problems with plasma desktop, and plasmoids. Any suggestions?
[18:05] <dissillusioned> Media monkey, VLC, Messenger
[18:05] <Auriga> Kmck did you see the message through all of that?
[18:05] <rs0832> aimio,  open the grub.cfg file as root
[18:05] <Nubulis> plasma and plasmoids are completely unresponsive
[18:06] <TyrantElf> shchbaker, I don't get what your saying.   The proprietary driver wasn't helping, in fact, it wouldn't allow me to use some applications
[18:06] <MrUnagi> can you deny sftp access without denying ssh scp access?
[18:06] <shcherbak> !plymouth | kmck
[18:06] <Guest58991> KM0201: all the older versions work as do all other distroes -- just not anything with network-manager --- ass i never got help yesterday -- everytime i come here there is a prick like you
[18:06] <KM0201> Guest58991: well, sorry you think i'm a prick, yous houldn't feel obligated to reply further...
[18:07] <linux_probe> lol
[18:07] <kmck> ubottu: yes that is what i read.. but i'm not not sure what directory to put the imagine in to change it to but i found some software in software center that will hopefully work
[18:07] <Guest58991> KM0201: great then shut up
[18:07] <aimio> rs0832, yeah i am in it know.
[18:07] <KM0201> Guest58991: i didn't say you got help yesterday, i said i dealt w th the same problem, and resolved it by fixing the router.. go ahead though, trudge on
[18:07] <dissillusioned> well good luck with all your problems guys, I'm off to uninstall Ubuntu, cheerio
[18:07] <rs0832> kmck, ubottu is a bot not a person :)
[18:07] <country0129> Guest58991: Is it a Windows7 machine with which you're trying to connect?
[18:07] <KM0201> dissillusioned: good luck
[18:07] <rs0832> aimio, find the line set default="0"
[18:07] <kmck> rs0832: seriously!? that has answers to questions?? hahhahaa
[18:07] <TyrantElf> kmck, you are aware ubottu is an irc bot, not a person, right?
[18:07] <Guest58991> KM0201: it's not the router ever other distro i install works
[18:07] <shcherbak> Guest58991: cool, now we all want to help ;)
[18:07] <bonjoyee> MrUnagi: try commenting out this line: Subsystem sftp /usr/lib/openssh/sftp-server then restart sshd..
[18:07] <JackOfHearts> damn flash
[18:08] <KM0201> Guest58991: ok.. you seem to feel intent on convincing me of this.. i could care less, my internet works just fine.
[18:08] <kmck> hahahahaha no i wasn't
[18:08] <bonjoyee> MrUnagi: in /etc/ssh/sshd_config
[18:08] <MrUnagi> bonjoyee: my subsystem is internal-sftp.....that will break something wont it?
[18:08] <izinucs> JackOfHearts: you on 64 bit?
[18:08] <JackOfHearts> i was try every chrome version flash version avalible in repos and still crashing after minimalize from fulsxcreen
[18:08] <JackOfHearts> no 32 bit
[18:08] <rs0832> kmck, yes :) you'll notice the !plymouth | kmck in shcherbak s message :)
[18:08] <kmck> Auriga: yes i was able to catch it thank you veyr much!
[18:08] <Guest58991> country0129: only the ubuntu distros don't work
[18:08] <aimio> rs0832, yeah i found it
[18:09] <kmck> rs0832: ahhhh okay! well i learn something new every time i come in here! hahaha
[18:09] <Guest58991> KM0201: mine as well - just not with 10.10
[18:09] <KM0201> Guest58991: well, then i guess you have issues.
[18:09] <country0129> Yessir.  I have Ubuntu with a windows 7 machine.  Windows Live Essentials absolutely prevented me from connecting.  Uninstalled WLE, and WAH-LAH...perfect.
[18:09] <Guest58991> KM0201: yes you are one of them
[18:09] <izinucs> JackOfHearts: if you have more than one flash protocol (right term?) installed you'll have issues.. gnash, flashplugin-nonfree etc..
[18:09] <rs0832> kmck, thats a good thing :) you can find more info on ubottu at www.ubottu.com if you are interested
[18:09] <KM0201> Guest58991: then why are you inclined to talk to me?.. there's 1300 people here, find someone else to whine to.
[18:10] <country0129> Over a month of trying to find a workaround:  no dice.
[18:10] <porkchop_> so are most people running 64 bit or 32 bit ubuntu these days? is 32 bit still more stable or is that moot at this point?
[18:10] <Guest58991> KM0201: please be quiet
[18:10] <rs0832> aimio, replace it with set default="2"
[18:10] <JackOfHearts> izinucs: srsly ?? no way jose .. im instaling one uninstallig another jesus hrist im not idiot i got gentoo on second partition
[18:10] <KM0201> Guest58991: all youhave to do is stop talking to me.. i offered to end this long ago.
[18:10] <rs0832> aimio, then save the file and try to reboot :)
[18:10] <aimio> rs0832, done.
[18:10] <aimio> rs0832, ok
[18:10] <JackOfHearts> i try chromium than
[18:11] <TyrantElf> shchbaker, Do you think I should try instlaling the proprietary driver again?
[18:11] <Auriga> Kmck. Glad to have helped.
[18:11] <shcherbak> TyrantElf: yes
[18:11] <izinucs> JackOfHearts: nobody can tell on irc what level of experience you have ... so your response is a bit harsh..
[18:11] <Guest58991> * [KM0201] is logged in as KM0201
[18:11] <Guest58991> * [KM0201] (~KM0201@user-0c93d5m.cable.mindspring.com): KM0201
[18:11] <Guest58991> * [KM0201] #ubuntu #porn #sexoffenders
[18:11] <Auriga> Kmck let me know if it works please.
[18:11] <KM0201> moron
[18:11] <JackOfHearts> izinucs: :P
[18:12] <MrUnagi> what in the world just happened?
[18:12] <IdleOne> Guest58991: for you to be able to paste those channels you also need to be in them to see it in his whois. Welcome to freenode.
[18:12] <shcherbak> TyrantElf: always you can remove it, also check your tv spec (from manufacturer website) what resolution it shuld support
[18:12] <KM0201> IdleOne: lol
[18:12] <MrUnagi> how can i list the groups a user is part of in cli
[18:12] <bonjoyee> MrUnagi: groups
[18:12] <country0129> Networking printer help?
[18:12] <shcherbak> KM0201: naughty boy!
[18:12] <izinucs> country0129: what's the question?
[18:12] <Auriga> You asked earlier to no avail...?
[18:13] <KM0201> shcherbak: lol, secrets out, what can i say
[18:13] <country0129> Ubuntu connected to a Windows7Pro machine via wireless network.  All working except printing.  Samba4 installed.  Otion to "Windows Printer via Samba" not in New Printer dialog choices.  Printer is Canon IP1800, connected via USB to Windows machine.  What do I need to do to print from Ubuntu?
[18:13] <rs0832> KM0201, :)
[18:13] <kmck> Auriga: ok i am going to restart quick to see if it worked or not. i will be right back.
[18:13] <Auriga> Nice.
[18:13] <ryan_languagelab> Is it possible to tell compiz to ignore emacs? I am getting strange graphics http://www2.ryankaskel.com/misc/ubuntu/strange_emacs_lines_20110101.png
[18:13] <MrUnagi> bonjoyee: how can i remove a user from a group
[18:13] <TyrantElf> shchbaker, the resolution isn't the problem, the fact that once X starts there is no hdmi output at any resolution is the problem
[18:14] <aimio> rs0832, it worked i got booted into my ubuntu :D - shall i delete the bad kernel ?..
[18:14] <MrUnagi> nevermind bonjoyee  i got it
[18:14] <gobbe> country0129: you mean that in your new printer window, there's no Windows printer via samba under network printer?
[18:14] <country0129> Yessir.
[18:14] <MrUnagi> erm, removing sftp from the user didnt work bonjoyee  lol
[18:14] <izinucs> country0129: Samba4 is a bit different.. I don't know it.. what kind of support does canon have for linux? check their site.. it's not really a networked printer but more of a shared printer.. drivers for the canon I think need to be installed on the ubuntu box if available.
[18:15] <rs0832> aimio, yes .. delete it, and then run sudo update-grub. your computer should be back to normal :)
[18:15] <country0129> Cups doesn't have a printer driver for that Canon printer.  I wondered if it were possible to print through the windows machine.
[18:15] <aimio> rs0832, the problem for me now is i don
[18:15] <aimio> idon
[18:15] <aimio> i don
[18:16] <rs0832> aimio, ?
[18:16] <shcherbak> TyrantElf: ok, have you tried to boot into recovery and run failsafex on hdmi?
[18:16] <sresu> Is there any download manage which employs queue manager? As in I can queue my downloads one after another ...
[18:16] <aimio> crapy keyboared.. i don't know witch one i should delete..
[18:16] <izinucs> country0129: perhaps using raw or ps but that really depends on the canon.. google might be your friend here.. also ubuntuforums.org
[18:16] <sresu> manager*
[18:16] <country0129> Thanks, Izinucs.  I'll try them again.
[18:16] <TyrantElf> no, I'll try it,.
[18:16] <country0129> Scouts out!
[18:16] <bonjoyee> sresu: downthemall addon for firefox
[18:16] <rs0832> aimio, ill tell you
[18:16] <JackOfHearts> damn chromium same problems
[18:16] <shcherbak> TyrantElf: of try xinit from tty and see what errors come up
[18:17] <JackOfHearts> i try updte kernel  maybe that helps
[18:17] <sanjoy> how to add fonts in open office?
[18:17] <sresu> bonjoyee: I use it. It doesn't really work as per queue. I don;t know for what they have given top, up, bottom, down when they really work right
[18:18] <sresu> bonjoyee:  ...really don't work right
[18:18] <erUSUL> sanjoy: install them in the system and they will be aviable to oo.org too
[18:18] <erUSUL> !fonts | sanjoy
[18:18] <goetter> i just ran across a script that requires python 2.6; my 8.04 only has 2.5something and apt-get says i'm up to date. google isn't helping.
[18:18] <bonjoyee> sresu: strange...it works well for me...and the queue works as it should..what happens in your case?
[18:18] <goetter> do i need to fiddle with some apt path to get the python2.6 package?
[18:19] <sanjoy> thnx all
[18:19] <aimio> rs0832, i'm inside the boot folder now.
[18:19] <rs0832> aimio, delete all the files with the version '2.6.36.2' in the name
[18:19] <rs0832> aimio, make sure you delete the right ones
[18:20] <erUSUL> goetter: you can check if it is aviable i backports
[18:20] <aimio> is there like a search and delete command i can use
[18:20] <erUSUL> !backports | goetter
[18:20] <rs0832> aimio, ill reboot and come back in a minute ok? delete what i told you to, then do an ls and pastebin it for me
[18:20] <aimio> like regex :S
[18:20] <skullboy> ok so how do i update libjpeg62
[18:20] <sresu> bonjoyee: In my case, suppose if I have four downloads to be run. I stack them one after another and when first finishes, it doesn't automatically starts second. (Moreover, at times every download almost stops at 99% that you have to pause and resume it to get it completed though that's secondary problem)
[18:20] <skullboy> ok so how do i update libjpeg62
[18:20] <TyrantElf> shchbaker, explain how to do that and I will
[18:21] <sresu> bonjoyee: And how do you get it done for you?
[18:21] <rs0832> skullboy, mark it for update in synaptic and apply changes
[18:21] <shcherbak> TyrantElf: you mean xinit?
[18:21] <rs0832> aimio, so ill reboot now ok?
[18:21] <goetter> backports... hmm
[18:21] <TyrantElf> shchbaker, that entire line, I've been using linux for about 6 months, but i'm still kinda new
[18:21] <kmck> ok i tried downloading something called splash screen in software center, and checked the box that said to use a splash screen on start up and added a .jpg phone and activated it and restarted and it still showed the purplish screen that said Ubuntu 10.10 and the little dots... am i suppose to 'de-activate' the original one or am i not doing it right?
[18:21] <rs0832> aimio, ill make you work easier :)
[18:21] <Gunni> how do i make a service start at startup of computer?
[18:22] <bonjoyee> sresu: i have set max concurrent download to 1...when i add more they get queued..and then get downloaded in order!
[18:22] <JackOfHearts> oki
[18:22] <JackOfHearts>  i found out
[18:22] <JackOfHearts>  how to fix chrome + flash
[18:22] <TyrantElf> !xinit
[18:22] <shcherbak> TyrantElf: first, can you see terminal on hdmi, can you login?
[18:22] <JackOfHearts>  delete /opt/google/chrome/libgcflashplayer.so
[18:22] <compdoc> Gunni, I place a script in init.d
[18:22] <skullboy> rs0832, cant
[18:22] <aimio> rs0832, there is like 30 files :P
[18:22] <porkchop_> so if lexmark only offers a 32 bit driver for my printer, does this mean i have to install 32 bit ubuntu?
[18:22] <JackOfHearts> or turn off in chrome options
[18:22] <Dr_Willis> kmck:  10.10 uses plymouth these days. it used to use usplash and xsplash.  Im not sure those work proerly any more.
[18:22] <rs0832> aimio, use the rm command to remove the following files : config-2.6.36.2-candela, System.map-2.6.36.2-candela, vmlinuz-2.6.36.2-candela
[18:23] <TyrantElf> I need to switch to a diffrent computer for irc...
[18:23] <Dr_Willis> porkchop_:  check the cups web site and the linuxprinting.org site. its possible the drivers are allready tehre and you dont need the ones from lexmark
[18:23] <aimio> rs0832, yeah rm thats what i was talking about thx :D
[18:23] <sresu> bonjoyee: Hold on I'll try it
[18:23] <Gunni> compdoc it is there but how do i make the system run it at startup
[18:23] <porkchop_> Dr_Willis thanks, will do
[18:23] <kmck> Dr_Willis: do you know how to change the flash screen using Plymouth? i did find a site that told me the sudo command to use but i don't know where to put the .jpg at
[18:23] <shcherbak> I need smoke, back in 5
[18:23] <rs0832> aimio, will reboot now.. do the ls and paste so i can check it in the mean time ok?
[18:23] <Dr_Willis> kmck:  plymouth dosent use jpg'
[18:23] <compdoc> Gunni, I think you need to make sure the file's permissions is set to execute
[18:23] <rs0832> skullboy, maybe there isnt an update then
[18:24] <compdoc> it just runs when you boot
[18:24] <Gunni> compdoc isnt there some command to add a service to the auto start list ?
[18:24] <Dr_Willis> kmck:  plymouth dosent use jpg's - it uses some complex animation system. there are alternative Plymouth themes.. but i dont bother with them
[18:24] <kmck> Dr_Willis: oh... shoot
[18:24] <Auriga> Sorry Kmck for the failed info...
[18:24] <rs0832> kmck, i think it uses pcx and png but i may be mistaken
[18:24] <Dr_Willis> kmck:  messing with splash  stuff more hassle then its worth to see somthing for 5 sec when the system boots in under 30
[18:25] <compdoc> Gunni, no, as long as its in the init.d folder, it'll run. I use a script to make vncserver a service w/ start/stop/etc
[18:25] <rs0832> kmck, there is another way
[18:25] <kmck> Dr_Willis: yes i can understand your point and agree with you there
[18:25] <kmck> rs0832: how so?
[18:25] <rs0832> kmck, you can try this howto: http://ubuntuforums.org/showthread.php?t=11478
[18:25] <erUSUL> Gunni: for old system V init you have update-rd.d
[18:25] <erUSUL> !init | Gunni
[18:26] <skullboy> rs0832, yea there is my ver is 6b-16.1 i want to upgrade to 6b1-1
[18:26] <porkchop_> Dr_Willis My printer is not listed, so I do need to revert to 32 bit?
[18:26] <Gunni> is that not used anymore in ubuntu 10.10?
[18:26] <rs0832> kmck, i dont know if it works, but maybe you can tell us :)
[18:26] <shcherbak> Gunni: F-SPOT
[18:26] <jchvelasco> hi happy new year yall
[18:26] <rs0832> skullboy, no i mean no updates in the repos
[18:26] <jchvelasco> please help me with my problem
[18:26] <shcherbak> soryy, caps
[18:27] <Dr_Willis> porkchop_:  most printers just use a ppd file.. so i dont know. ive never seen '32bit' only printer drivers.. unless those lexmarks are really cheap. you might be stuck.
[18:27] <jchvelasco> constantly getting cannot find a medium containing live file system
[18:27] <Dr_Willis> porkchop_:  you could check the forums i guess.
[18:27] <merd> can someone give the link to a good makefile tutorial for complete beginner?
[18:27] <porkchop_> Dr_Willis Thanks again
[18:27] <rs0832> skullboy, but if you are sure there is one in the repos, you can download the .deb from packages.ubuntu.com and install
[18:27] <rs0832> gonna restart now, brb
[18:27] <jchvelasco> please help me with this error constantly getting cannot find a medium containing live file system
[18:27] <erUSUL> merd: ##c or #workingset may have more and better help on "make" issues
[18:28] <jchvelasco> please help me with this error constantly getting cannot find a medium containing live file system
[18:28] <TyrantElf> Shchbaker, okay let's try this
[18:28] <compdoc> you may need to run:  update-rc.d yourprogram defaults
[18:29] <clgshaft_> hello
[18:29] <skullboy> rs0832, no there ist but when i try to install the new ver from deb i get this "Breaks existing package 'libjpeg62-dev' dependency libjpeg62 (= 6b-16.1) "
[18:29] <Gunni> when aptitude says i'm installing untrusted pakages, and they include udev, is that ok or a baaad thing?
[18:29] <clgshaft_> how do i properly disable pulseaudio and use alsa?
[18:29] <bonjoyee> jchvelasco: what are u trying to do? run a livecd/usb?
[18:29] <shcherbak> TyrantElf: so, when you boot on hdmi what happent (try to hold shift on boot to see grub)
[18:29] <jchvelasco> bonjoyee already tried both
[18:29] <Dr_Willis> clgshaft_:  any time ive seen people try to disable pulse.. they end up breaking things more.
[18:29] <jchvelasco> i tested the md5 has.. its the same
[18:29] <jchvelasco> *hash
[18:30] <clgshaft_> ok i guess i broke things
[18:30] <clgshaft_> i need it disabled though
[18:30] <sresu> bonjoyee: Nope, it isn't working that right
[18:30] <adrian_> guys, are there any other channels?
[18:30] <bonjoyee> jchvelasco: get the same error for livecd as well?
[18:30] <Gunni> adrian_ /list
[18:30] <jchvelasco> yeah
[18:31] <Dr_Willis> adrian_:  this server has 10000's of channels. :)
[18:31] <Gunni> more
[18:31] <Dr_Willis> !channels
[18:31] <rs0832> aimio, done?
[18:31] <jchvelasco> here's another info.. i always need to put nomodeset
[18:31] <aimio> rs0832, yeah all is working well know :D
[18:31] <jchvelasco> my monitor goes off without nomodeset
[18:31] <adrian_> thanks a lot, using Ubunu fot hte first time
[18:31] <rs0832> aimio, great :)
[18:32] <bonjoyee> sresu: then u could try some other download managers,,,there are a few in the repos..also im using downthemall 2.0b5..which one are u?
[18:32] <adrian_> !channels
[18:32] <aimio> rs0832, thank you for you assistance but can i bother you with another problem i am having ?..
[18:32] <TyrantElf> Shchbaker, when I go into recovery mode, as soon as it finishes loading, the Hdmi output turn off.  I can see it loading everything, grub, and the motherboard splash, but once it loads, the Hdmi goes out
[18:32] <kimmok> hello. i accidentally did "sudo rm -rf /dev/* ". and lost all device nodes. Now i rsynced some other machines /dev nodes back, but obviously things like /dev/mapper and /dev/disks/ are lost. Anybody know how to create /dev/mapper and /dev/disks? is there a way to generate /dev/disks/by-id/ for example?
[18:32] <Spoon37> can anyone shed light on how to get MESA? (http://www.mesa3d.org/)
[18:32] <rs0832> aimio, sure
[18:33] <rs0832> Spoon37, you mean libglu1-mesa?
[18:33] <sresu> bonjoyee: DTA 1.1.10
[18:33] <snake> is there anyway to load an actual hard disk partition in virtualbox?
[18:33] <snake> or other virtualization software?
[18:33] <sresu> bonjoyee: I don't know why its not updated
[18:33] <Dr_Willis> snake:  yes there is.. and its Highly NOT reccomended.
[18:33] <Spoon37> rs0832, I'm honestly not sure, I'm trying to install HoN (a MOBA game) and I have intel gfx card that has known problems, but I was told MESA might be able to get it to work
[18:33] <compdoc> snake, share it, then connect to it
[18:34] <bonjoyee> sresu: the one im using is beta..u have to install it manually!
[18:34] <sacarlson> kimmok: would a reboot fix it?
[18:34] <snake> Dr_Willis, why is it not reccomended?
[18:34] <shcherbak> TyrantElf: did you try to press Alt-Ctlr-F1 on after it goes blank?
[18:34] <ZykoticK9> snake, and the link to that "highly not recommended" instructions is http://www.virtualbox.org/manual/ch09.html#rawdisk
[18:34] <Slyboots> ffs.. What do I need to install get Gnome to function correctly..
[18:34] <Slyboots> None f my inwodws have.. "Titlebars"
[18:34] <Dr_Willis> snake:  total loss of data on teh drive is one little possiblility...
[18:34] <skullboy> rs0832, no there ist but when i try to install the new ver from deb i get this "Breaks existing package 'libjpeg62-dev' dependency libjpeg62 (= 6b-16.1) "
[18:34] <Slyboots> So I cant move them around
[18:34] <sresu> bonjoyee: How long you have been using it?
[18:34] <rs0832> Spoon37, ah then libglu1-mesa is what you are looking for... it is in the repos (through synaptic package manager) under the name i mentioned
[18:34] <shcherbak> TyrantElf: other way press e in grub menu
[18:34] <snake> Dr_Willis, oh well that's fantastic! :D
[18:34] <Spoon37> rs0832, thank you.
[18:34] <Dr_Willis> Slyboots:  try running 'metacity --replace &' via terminal or alt-f2
[18:34] <icesword> !gnome
[18:35] <snake> I suppose I won't risk it.
[18:35] <rs0832> Spoon37, good luck and yw :)
[18:35] <rs0832> aimio, you had a question?
[18:35] <bonjoyee> sresu: quite some time....since firefox beta 6 i guess!
[18:35] <compdoc> snake, or iscsi, or add it as a block device if you need direct access to the drive
[18:35] <Spoon37> thanks, I'll be needing it >.<
[18:35] <skullboy> rs0832, no there ist but when i try to install the new ver from deb i get this "Breaks existing package 'libjpeg62-dev' dependency libjpeg62 (= 6b-16.1) "
[18:35] <bonjoyee> sresu: i mean firefox 4 beta 6!
[18:35] <Slyboots> Okay; my windows just vanished and reloaded..
[18:35] <kimmok> sacarlson: that's what i'm trying to find out before rebooting. I'm afraid that reboot will hang
[18:35] <hearit> http://pastebin.com/ExMAc11w
[18:35] <hearit> help
[18:35] <Slyboots> no change; still missing the titlebars
[18:36] <sresu> bonjoyee: oh.. Strange that mine didn't even touch ver 2. Does it used to work righ with queue manage in ver 1?
[18:36] <aimio> rs0832, 2 days ago i started to work on fixing my sound as there was a bug, i had sound in the built in speakers but not in the headphone jack, so i started to messing around with it and so i installed all kinds of "stuff", oss drivers, alsamixer, etc etc, the problem is now i have no sound at all :) " ps the fix that was stated for the computer i have, was add a line to alsa conf.. but it did
[18:36] <aimio> not work so thats why i started to mess around with it. so now my problem is "no sound" at all.. < my computer is a ideapad s10-3t lenovo netbook, running ubuntu 10.04. Any ideas?.
[18:36] <dougl> TyrantElf, how are you making out?
[18:36] <jchvelasco> is there a big difference between 10.04 and 10.10?
[18:36] <shcherbak> TyrantElf: by the way, try to shche<TAB> when you adress me, I do not have too many colors, so hard to find you.
[18:36] <TyrantElf> Shchbaker, I g2g eat, I'll be back in a few minutes
[18:36] <rs0832> skullboy, where did you get the deb from?
[18:36] <sacarlson> kimmok: as far as I can tell /dev is mounted to devtmpfs  that is just a temp structure that will be recreated at boot,  I could be wrong, but it can't hurt to try
[18:37] <bonjoyee> sresu: never really noticed any issues with queuing..
[18:37] <Slyboots> So.. metacity is installed but doesnt seem to be operating correctly
[18:37] <Dr_Willis> Slyboots:  thats very weird.. can you open up a terminal?
[18:37] <skullboy> tnttnt
[18:37] <sresu> bonjoyee: Okay, just delineate briefly about how you do it, again ...
[18:38] <kimmok> sacarlson: ok. good to know
[18:38] <Dr_Willis> Slyboots:  if so run 'metacity --replace' and look for any error messages  when it crashed
[18:38] <Slyboots> Okay.. hold on
[18:38] <kimmok> sacarlson: well, i'll backup and try. if i'm not here in ~5 mins, it means i couldn't reboot :-)
[18:38] <rs0832> aimio, maybe you have broken the audio drivers.. try removing alsa and installing pulseaudio...
[18:38] <kimmok> sacarlson: thanks
[18:39] <bonjoyee> jchvelasco: well the biggest difference is 10.04 is LTS..while 10.10 is not!
[18:39] <skullboy> rs0832, http://packages.debian.org/sid/libjpeg62
[18:39] <aimio> rs0832, i went grazy on it i installed all kind of drivers alsa,oss,pulseaudio, and what not..
[18:39] <Slyboots> No error messages outputting to terminal
[18:39] <Slyboots> But no titlebars either
[18:40] <rs0832> skullboy, hmm then you may have to remove the older version and install the newer one... but ask on the channel if it will remove anything else because i am not sure if it will
[18:40] <jchvelasco> how bout installing in wubi and not installing in wubi
[18:40] <Dr_Willis> Slyboots:  that is very weird.. as a test you could make a new user. and see if the problem affects them also.
[18:40] <Dr_Willis> jchvelasco:  avoide wubi if you can.
[18:40] <rs0832> aimio, then try installing pulseaudio and remove alsa and oss
[18:40] <shcherbak> Slyboots: tried to chnage theme yet
[18:40] <sresu> bonjoyee: I mean what all settings you have made ....
[18:40] <Slyboots> Yup; changing theme cahges the colouring.. but no titlebars
[18:40] <aimio> rs0832, ok i shall try.
[18:40] <jchvelasco> but im stuck with a problem in installing :(
[18:40] <Dr_Willis> Slyboots:  you could also try 'compiz --replace'
[18:41] <nit-wit> jchvelasco, what is your actual question
[18:41] <Slyboots> Im running FreeNX; I dont have hardware accelreation
[18:41] <rs0832> aimio, for a guide/howto, i suggest https://help.ubuntu.com/community/Sound
[18:41] <jchvelasco> i'm constantly getting this error 'unable to find a medium containing a live file system'
[18:41] <shcherbak> Slyboots: gtk-window-decorator?
[18:41] <nit-wit> jchvelasco, when?
[18:42] <rs0832> skullboy, i have to go now so good luck with it
[18:42] <bonjoyee> sresu: if possible try 2.0b5..and see if the error persists
[18:42] <rs0832> aimio, i have to go now... if you still need help i will be back tomorrow.. good luck :)
[18:42] <nit-wit> jchvelasco, can you not boot into the wubi?
[18:42] <skullboy> rs0832, well thx 4 the help
[18:42] <jchvelasco> i've been trying to install ubuntu this week  i just stopped yesterday
[18:42] <rs0832> bonjoyee, will be back tomorrow, hopefully with a solution for you: )
[18:43] <rs0832> skullboy, :) y/w
[18:43] <Slyboots> I *dont* have hardware accelration
[18:43] <sresu> bonjoyee: Do you add new download keeping first running or paused?
[18:43] <Slyboots> It wont work in a FreeNX server anyway
[18:43] <skullboy> ok so how do i remove libjpeg62 without loseing lots of other apps
[18:43] <nit-wit> jchvelasco, so you haven't installed your having problems and want a little help is this correct
[18:43] <jchvelasco> using wubi i'm able to continue til the Log In but my mouse and keyboard are not working
[18:43] <jchvelasco> yes sir
[18:44] <bonjoyee> sresu: doesnt matter...it works either ways
[18:44] <jchvelasco> but Dr. Willis said. avoid using wubi
[18:44] <Dr_Willis> Slyboots:  could be some quirk/bug with freenx and how metacity is running.  You could try installing some alternative windw manager like fluxbox and try running that.
[18:44] <berg_LNX> quick question :) how do i name the output file when compiling a c program?
[18:44] <nit-wit> jchvelasco, so you get the win or Ubuntu menu you choose ubuntu and then no mouse or keyboard at the next menu
[18:45] <jchvelasco> hmm no.. its when im on the user log in ubuntu
[18:45] <danny_> Hi, anyone know why my lm-sensors not detect my i7?
[18:45] <eLrOnDz> hello all
[18:45] <jchvelasco> i guess wubi successfully installed ubuntu but mouse and keyboard are not working
[18:46] <sresu> bonjoyee: okay. The new download enters the Starting or waiting. As in does it starts even if first running?
[18:46] <nit-wit> jchvelasco, you don't have the autologin running then
[18:46] <Dr_Willis>  /quit
[18:46] <sresu> bonjoyee: enters as starting .. *
[18:46] <bonjoyee> sresu: when first is downloading..the second is waiting...
[18:46] <jchvelasco> autologin?
[18:47] <sresu> bonjoyee: I think I'm making some mistkae in settings probably ...
[18:47] <kimmok> berg_LNX: gcc -o myname myname.c i guess
[18:47] <jchvelasco> but what if i have autologin.. still mouse and keyboard will not work
[18:48] <clgshaft_> how do i know which audio device is being used?
[18:48] <nit-wit> jchvelasco, I have never used wubi, I assume that after the grub menu you either get in or you have to log in. In Ubuntu you can set to autologin
[18:48] <bonjoyee> sresu: in 2.0b5..under preferences>advanced>misc>download start order is set to " fast - as queued"
[18:48] <sresu> bonjoyee: Secondly, does your downloads at times stop at 99%?
[18:49] <MagicJ> has anyone noticed that the weather applet is not updating since 30th, I have multiple machines and they are all showing the same last update
[18:49] <bonjoyee> sresu: sometimes yes...they do become very slow at that point!
[18:49] <jchvelasco> yeah lets say im already in.. my hardware are not working in wubi
[18:49] <sresu> bonjoyee: Okay, any other download manager you know?
[18:50] <ZeXx86> Hi .. is possible to make a deb package which can compile a linux module ?
[18:50] <bonjoyee> sresu: cli or gui?
[18:50] <jchvelasco> i tried to install ubuntu from USB and cd but i keep getting 'unable to find a medium containing live file system'
[18:50] <nit-wit> jchvelasco, not sure why you are loosing the mouse, and keyboard, but theoretical situations are not addressing your problem
[18:50] <sresu> bonjoyee: GUI containg queue manager
[18:51] <berg_LNX> kimmok: thanks :) got it working, simple as a -o [filename] option
[18:51] <recon69_lap> my gnome got stuck again and ignored my left mouse button again!!!
[18:51] <jchvelasco> i tried to install ubuntu from USB and cd but i keep getting 'unable to find a medium containing live file system'
[18:51] <sacarlson> ZeXx86: I beleave so since that's what it apears happens when I install virtualbox
[18:51] <Slyboots> Rigiht; going to purge adn remove Gnome
[18:52] <berg_LNX> recon69_lap: I got that same issue, no idea why!
[18:52] <nit-wit> jchvelasco, have you ever gotten it installed and actually used it.
[18:52] <recon69_lap> had to restart gnome to get going again, anyone interested in trying to find the bug before my logs go?
[18:52] <bonjoyee> sresu: d4x / gwget are quite good..used them before switching to downthemall
[18:52] <ZeXx86> sacarlson: do you have any howto, please ?
[18:52] <jchvelasco> only in Virtualbox
[18:52] <bonjoyee> sresu: i'd prefer d4x..it has more features
[18:53] <recon69_lap> berg_LNX: had it a couple of times over the last year or so. bit worrying as it's a basic feature
[18:53] <nit-wit> jchvelasco, lets go to #ubuntu-beginners slower channel nobodies there posting
[18:54] <jchvelasco> ok sir
[18:54] <pzr11hdik56> hello
[18:55] <berg_LNX> recon69_lap: Yeah I've had it for a long time myself, it only appears after I wake up the laptop (from a suspend). It's been gone for a long time now, but it's back once more. I have to kill "gnome-session" to restore it. Never found any reports on the problem...
[18:55] <pzr11hdik56> what is the effect to make window transparen when mouse is rolled out from that window?
[18:56] <recon69_lap> berg_LNX: think I'll go make a report :)
[18:56] <berg_LNX> recon69_lap: Do it :)
[18:56] <sacarlson> ZeXx86: there are preinstall scripts and postinstall scripts that you can make do compile or whatever else you want http://www.linuxfordevices.com/c/a/Linux-For-Devices-Articles/How-to-make-deb-packages/
[18:58] <pzr11hdik56> hu
[18:58] <Cromag> does vlc for linux play bluray iso's ?
[18:58] <recon69_lap> berg_LNX: already reported https://bugs.launchpad.net/ubuntu/+source/linux/+bug/673201
[18:59] <sacarlson> ZeXx86: if you want to look at an example you should open the virtualbox deb file in an arkive manager and take a look at how they did it
[18:59] <aimio> how can i check what drivers i have installed for a selected hardware like, sound,video, etc..
[18:59] <pzr11hdik56> how can i make the window appear transparent on mouse rolled out?
[19:00] <pzr11hdik56> the window is minimized when mouse is rolled out. I just want to make transparent
[19:00] <berg_LNX> recon69_lap: Ah... I'll follow that one then :)
[19:00] <pzr11hdik56> i think it's some compiz effect
[19:01] <KM0201> Cromag: you could probably mount it as a disk, and get vlc to play it..
[19:01] <GeekSquid> pzr11hdik56: why don't you ask in #compiz
[19:01] <KM0201> pzr11hdik56: #compiz
[19:02] <Slyboots> !gnome
[19:02] <KM0201> considering compiz has approximately 84 gazillion options, you'll probably get better help there
[19:02] <pzr11hdik56> oks
[19:02] <pzr11hdik56> and one more thing..
[19:02] <Slyboots> What do I need for a "basic" gnome enviroment?
[19:03] <GeekSquid> KM0201: is that all? I thought it was 84 gogoplexzillion
[19:03] <GeekSquid> Slyboots: install the desktop version of ubuntu
[19:03] <KM0201> GeekSquid: maybe i was off by a couple 100 trillion, i dunno.. :)
[19:03] <Slyboots> GeekSquid: thats not a basic version of Gnome
[19:03] <Slyboots> Thats a entire Gnome eniroemtn and a ton of other crap I dont need
[19:04] <sresu> !info d4x lucid
[19:04] <KM0201> Slyboots: i think you can install ubuntu-desktop and that will give you what you want.
[19:04] <sresu> !info d4x
[19:04] <Slyboots> ... I *dont* want the entire Gnome enviroemnt
[19:04] <Slyboots> Just the UI
[19:04] <Slyboots> And Xorg
[19:04] <Slyboots> I dont even have a monitor on this thing
[19:04] <KM0201> then why on earth ar eyou concerned about a UI?
[19:05] <Slyboots> Because need to use FreeNX to run a fe windows applcations in Wine
[19:05] <Slyboots> And FreeNX *demands* that I instlal Gnome
[19:05] <vsilverlord> MY Update manager doenst work. ubuntu 10.10
[19:05] <capti> Hi, does anyone know how to install ubuntu with SW raid if I would like to have multiple partitions on md device? I couldno make it with alternate installer. It creates allows only a md device creation with no partition.
[19:05] <KM0201> vsilverlord: sudo apt-get update && sudo apt-get upgrade    in a terminal
[19:05] <hamed> hi all
[19:06] <dougl> hamed, hello
[19:06] <hamed> dougl: hi
[19:06] <ZykoticK9> Slyboots, i use the gnome-desktop-environment package on my minimal installs (still probably a lot more then you want though)
[19:07] <hamed> bye :(
[19:07] <Slyboots> Mm
[19:07] <GeekSquid> Slyboots: I am a little confused, what are you trying to do, run wine apps on a headless machine via FreeNX?
[19:07] <Slyboots> Via VNC
[19:08] <Slyboots> the server runs 24/7 so I run other applctions on it..
[19:08] <psykatog> really dumb question - I'm trying to install slax on a usb, and the website's instructions say to run a shell script  - how do I do that on the consol
[19:08] <Slyboots> Steam requires XRender; so i need to use FreeNX for it to work correctly
[19:08] <TyrantElf> shchbak, is there any way you can hhelp me with this?
[19:08] <psykatog> I've navlgated to the disk and the folder in boot already as mentioned here, I just don't know the console command
[19:09] <skullboy> ok so how do i remove libjpeg62 without loseing lots of other apps
[19:09] <GeekSquid> Slyboots: really, Headless, remotly accessed, steam, wine, .... The graphics will never render fast enough for you to be playing games over VNC
[19:09] <kcorcoran> i am migrating from a windows platform.  i used an application called newsleecher; is there something like newsleecher for ubuntu?  i'd prefer not to use WINE.
[19:10] <Slyboots> Never said anything about playing games on it
[19:10] <Slyboots> A lot of Steam games are *very* big; so its helpful to have it download them overnight without the need for extra devices to be turned on
[19:10] <skullboy> ok so how do i remove libjpeg62 without loseing lots of other apps
[19:10] <sacarlson> capti: I'm tested a raid install with virtualbox with the alternate install disk and went quite smothly,  what is an md device,  sorry my terminoligy not very good
[19:10] <KM0201> skullboy: dunno, but it seems to want to remove everything GUI related
[19:10] <Slyboots> kcorcoran: Depends.. Do you want actual text access or just binaries?
[19:10] <samuel> alguien de chile
[19:10] <Slyboots> Im pretty sure newsleacher is binary only anyway..
[19:11] <KM0201> skullboy: why are you concerned w/ that?
[19:11] <NoNaMeNo> Hi, I'm using Ubuntu 10.10 and I can't get nfs mount on startup
[19:11] <GeekSquid> !fstab | NoNaMeNo
[19:11] <kcorcoran> Slyboots:  not sure how to answer that correctly.  I would use download NZB files and then allow newsleecher to work its magic.   Not sure that answers your question?
[19:11] <TyrantElf> Is there anyone here who is good with graphics and xorg that can chat with me?
[19:11] <Slyboots> kcorcoran: Then you only want binary access
[19:12] <Slyboots> Install SabnzbdPlus
[19:12] <NoNaMeNo> GeekSquid: after my system started, if I login and then mount -a, everything mounts
[19:12] <Slyboots> Its far.. *far* better than newsleacher in so many ways its not even funny
[19:12] <izinucs> TyrantElf: you gotta ask a more specific question.. that's pretty generic
[19:12] <capti> sacarlson: I would like to have one big md array of RAID5 with multiple partitions like a separate one for home.
[19:12] <kcorcoran> Slyboots:  will take a look.  Thank you!!
[19:12] <KM0201> NoNaMeNo: you could set mount -a to run o boot up?
[19:12] <TyrantElf> Okay, is there anyone here who can help me get hdmi output from a radeon HD 4670 working?
[19:13] <skullboy> KM0201, cause i need to remove it to install a newer ver
[19:13] <GeekSquid> NoNaMeNo: take a look at /etc/mtab ... will show what is mounted then write /etc/fstab to mount the share upon boot ... see the links above
[19:13] <Slyboots> Its sabnzbdPLUS; not sabnzbd
[19:13] <KM0201> skullboy: hmm, sounds entertaining
[19:13] <Slyboots> Sabnzbd hasnt been updated in years
[19:13] <chrometiger> is there a way of coping all the folders from one place to another but now the files within them ?
[19:13] <GeekSquid> TyrantElf: do you have the restricted driver installed ? what version of ubuntu?
[19:14] <goetter> is there a particular installation media i should choose to put ubuntu on an old laptop to use as a headless nas/etc?
[19:14] <aimio> i need help my sound is completly dead.
[19:14] <NoNaMeNo> my fstab is written with the nfs mounts, but they don't get mounted when I boot the system, I have to manually trigger the mount with mount -a
[19:14] <itaylor57> chrometiger: yews
[19:14] <sacarlson> capti:  raid5 I would have to look that up,  I played with raid1
[19:14] <goetter> server edition or desktop?
[19:14] <chrometiger> itaylor57:  how exactly
[19:14] <TyrantElf> GeekSquid, I am using open source drivers and using ubutu 10.04 Lucid.
[19:14] <aimio> i think i broke my drivers, how do i reverse it :S ?
[19:14] <yo_rmn> Hello, every time I install something I get this: http://paste.ubuntu.com/549346/
[19:15] <fil_64> _DeZ_: видишь? )
[19:15] <_DeZ_> =)
[19:15] <skullboy> KM0201, so any ideas
[19:15] <izinucs> TyrantElf: there is a bug report on that from Lucid.. It may have carried to Maveric .. check it out here.. there might be a solution listed. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/543021
[19:15] <KM0201> skullboy: sorry.. none
[19:15] <capti> sacarlson: basic install worked for me with RAID five, just everything was under / and could not make home on separate partition under the same md device.
[19:15] <GeekSquid> TyrantElf: reccommend the closed-source drivers, it includes the utility provided by ATI which will allow you to use the HDMI out
[19:15] <kcorcoran> Slyboots:  just installed sabnzbplus (via synaptic).  not sure how/where to launch.  nothing appeared in the applications.  is it strictly coomand line?
[19:16] <chrometiger> is there a way of coping all the folders from one place to another but now the files within them ?
[19:16] <dragonkeeper> how do i convert films to  1080p  with ubuntu ??
[19:16] <TyrantElf> I'll try....
[19:16] <Slyboots> no;ITs a web-based UI
[19:16] <goetter> kcorcoran: sabnzbplus is a service with a web ui
[19:17] <Slyboots> Seriouslyl just google SZabnzbd and there is LOTS of documentation
[19:17] <doudou_> Hello all.
[19:17] <GeekSquid> yo_rmn: please ask your question in the spanish channel #ubuntu-es ... I cannot read your errors
[19:17] <Slyboots> thatas a best place to start
[19:17] <psykatog> anyone?  What command do I use in terminal to run a shell script?
[19:17] <doudou_> Happy new year to all Ubuntu lovers
[19:17] <psusi> dragonkeeper, upconverting is pointless, it just wastes space and/or lowers the video quality... the resolution it was shot in is as good as it is going to get
[19:17] <GeekSquid> psykatog: ./script.sh
[19:17] <yo_rmn> GeekSquid, I notice too late, Ill' translate for you
[19:17] <TyrantElf> GeekSquid, When I installed the proprietary driver, I couln't run blender or assualt cube for some reason, so I uninstalled it.  I'll try again though.
[19:17] <_DeZ_> hello!
[19:18] <sacarlson> capti: well that's like saying you want to put another partition inside a partition since that's what a raid becomes,  I think you can create partition before you group them and keep one or more partitions a a disk that are not a part of the raid
[19:18] <KM0201> i didn't know anyone still played assaultcube
[19:19] <kcorcoran> goetter:  how do i launch the ui?
[19:19] <GeekSquid> TyrantElf: assaultcube has been superceeded by sauerbraten ... better game anyway
[19:19] <TyrantElf> GeelSquid: just wondering, do you know if the catalyst control center has overclocking?
[19:19] <capti> sacarlson: What I like is to have multiple partitions under an md device. with gparted I played around with partitioning. It worked. Just installer could not see the partitions under md.
[19:19] <Slyboots> kcorcoran: Read the documentation
[19:20] <Slyboots> This is really all explained
[19:20] <goetter> so is the ubuntu server edition what i would want for an old headless laptop NAS?
[19:20] <Slyboots> goetter: ... laptop.. nas?
[19:20] <sacarlson> capti: my simulation has 3 disk in one md,  is that what you mean?
[19:21] <Slyboots> but.. um.. yea you would want the server edition for that
[19:21] <JeopardySholdenK> doudou same for you! :D
[19:21] <goetter> :)
[19:21] <goetter> i'd buy a nas but free is pretty cheap
[19:21] <dragonkeeper> psusi how do they convert films that once was on vhs to hd then ...
[19:21] <doudou_> I need an advice from a Ubuntu geek. anyone ?
[19:21] <GeekSquid> TyrantElf: very unlikely, you might be able to do it with the command line, but that is way beyond the scope of this channel
[19:21] <kcorcoran> will do, however i mentioned i am migrating from a windows (point/click) OS - still learning Ubuntu, and not trying to learn anything too complex.  do not want to become discouraged.  let me ask this, is sabnzbplus easy to use like newsleecher or more complex?  please look at this from the perspective of someone new to linux.
[19:22] <sacarlson> capti: I'm not sure about raid5 but you can select any number of partition into any single raid
[19:22] <psusi> dragonkeeper, they don't... they go get the original film and scan it in hd
[19:22] <nicofs> I'm desperately looking for someone to help me fix my 3g connection... with network manager i can't connect (tries for some minutes and then gives up) - wvdial returns "No Carrier!"... i don't know what to do...
[19:22] <yo_rmn> GeekSquid, Dialog inteface could not be updated - ot wil not work in a dumb? terminal - emac interpreter buffer or without a controller(ing?) terminal plz no answer in any spanish channel
[19:22] <chrometiger> is there a way of coping all the folder structure from one place to another but not the files within them ?
[19:22] <NoNaMeNo> KM0201: GeekSquid , its a bug, solved with this http://ubuntuforums.org/showthread.php?t=1329355
[19:23] <goetter> newsleecher is probably more intuitive
[19:23] <doudou_> I was able to see workgroup and after a ubuntu updarte I can not longer see the other windows pcs. can someone advice, please
[19:23] <kcorcoran> appreciate the insight...will dig in a little deeper.  fingers crossed
[19:23] <Simpson_2> I've switched my system locale to nl_nl but nautilus is stil half english
[19:23] <capti> sacarlson: I have 3 phy disks. and I want all my system in raid5, just have separate partition for home. I did not want multiple mds since the resizing does not really work afterwards. But if i could have multiple partitions under a single big md device, then I could resize them easily with gparted. I personally tried resizing md partitions. Incerasing works ok, but decreasing will not gain the space back
[19:24] <JackOfHearts> in what package is glxgears?
[19:24] <JackOfHearts> in ubu 10.10
[19:24] <JeopardySholdenK> !guidelines
[19:24] <rww> !find glxgears
[19:24] <rww> JackOfHearts: mesa-utils
[19:24] <JackOfHearts> thx
[19:25] <JackOfHearts> im idiot io was try vesa-utils non stop
[19:25] <JackOfHearts>  and aptitude tells no such thing
[19:25] <JackOfHearts>  damn in rusty
[19:25] <JackOfHearts> im*
[19:25] <Eduard> Hello guys, does anybody know, how i can run bash scripts, through program launcher?
[19:25] <_DeZ_> àó íàðîä
[19:25] <psusi> capti, you can resize md partitions just fine if you do it right, but I would suggest you use lvm on top of md to divide it up into logical volumes of your choosing
[19:25] <_DeZ_> âû ìåíÿ ñëûøåòå
[19:25] <_DeZ_> íåò?
[19:25] <FloodBot1> _DeZ_: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[19:25] <_DeZ_> à7??
[19:26] <_DeZ_> õóé(
[19:26] <rww> _DeZ_: English here, please.
[19:26] <psusi> Eduard, same way you run any program...
[19:26] <aimio> can you take patchs from new distro upgrades ? like i have ubuntu 10.04 can i take stuff from 10.10 ?
[19:26] <_DeZ_> rww: ïî ðóññêè ìîæíî?
[19:26] <aimio> like driver updates etc..
[19:26] <sacarlson> capti: I just did some research on raid 5 since it says it needs a minimum of 3 disks or more,  so do they mean disks or just partitions?
[19:26] <psusi> aimio, no
[19:26] <_DeZ_> rww: ðóññêèé ?
[19:27] <Eduard> psusi: it does not work if in command box i define abs path to script & scriptname itself, nothing happens
[19:27] <JackOfHearts> 36689 frames in 5.0 seconds = 7328.450 FPS damn a bit low  wtf
[19:27] <GeekSquid> !ru | _DeZ_
[19:27] <Eduard> btw, my scipth has +x so thats not the prob
[19:27] <psusi> Eduard, you need to flag it as executable
[19:27] <sprung> Hello. I am connected to my work VPN using nm-applet. Now, I want to connect to the datacenter VPN, which can only be done from within the work VPN. nm-applet won't let me try to connect to it, the VPN is greyed out. Does nm-applet only let me connect to one VPN at a time? What's going on here??
[19:27] <_DeZ_> à ýòî êàêàÿ ñòðàíà òóò?
[19:27] <PhilT> RAID is multiple Disk
[19:27] <itaylor57> chrometiger: find . -type d -exec mkdir path/to/remotedir '{}' \;
[19:27] <psusi> Eduard, is the first line a proper #! line?
[19:28] <capti> psusi: you say with LVM i could divide a single md array to multiple sices? like partitions? I wonder how others are doing installation with raid. I guess I am not the first in the world
[19:28] <Eduard> psusi: #!/bin/bash
[19:28] <_DeZ_> ýòîò êàíàë êàêîé ñòðàíû?
[19:28] <_DeZ_> ))
[19:28] <chrometiger> thanks
[19:28] <psusi> capti, sort of... lvm logically slices up disks in ways that are similar to partitions, but better... take a look at wiki.ubuntu.com/Lvm
[19:28] <GeekSquid> _DeZ_: /join #ubuntu-ru
[19:29] <psusi> Eduard, then it should work
[19:29] <yeats> !ru | _DeZ_
[19:29] <capti> sacarlson: yes I have multiple disks and would like to have a speedy and redundant system
[19:29] <_DeZ_> ïîñåòèë
[19:29] <_DeZ_> óæå
[19:30] <capti> psusi: thanks I am readin
[19:30] <Eduard> psusi: sorry, my bad, on the second line i had a joint command, my typo was one & instead of two
[19:31] <Arachon> Could someone help me a bit with understanding the file system structure in Ubuntu?
[19:31] <sacarlson> capti: is sounds like the last entry in this article explains a solution and seems you can have raid5 and raid1 over only 3 disks http://ubuntuforums.org/showthread.php?t=155336
[19:31] <yeats> !filesystem | Arachon
[19:31] <GeekSquid> !ask | Arachon
[19:31] <capti> sacarlson: thanks i am readin
[19:32] <JackOfHearts> ny one knows dota like game on linux?
[19:32] <Rypervenche> How can I make all of the combinations of all 26 letters plus 0-9 in Bash? I know I can do {A..Z} for the letters and {0..9} for the numbers, but how can I do them both in the same digit place?
[19:33] <JackOfHearts> dota= defense of ancients
[19:33] <JackOfHearts>  cuz legue of legends dont works
[19:33] <sprung> Hello. I am connected to my work VPN using nm-applet. Now, I want to connect to the datacenter VPN, which can only be done from within the work VPN. nm-applet won't let me try to connect to it, the VPN is greyed out. Does nm-applet only let me connect to one VPN at a time? What's going on here??
[19:33] <sacarlson> capti: I sounds like you can break your 3 disk into 6 partitions and use 3 for your raid 5 and the other 3 for a raid 1,  since I also note you can't boot from a raid 5
[19:34] <JackOfHearts> so guys? any linux player here?
[19:34] <capti> sacarlson: some says :"You cannot boot from raid5 array with lilo or grub." This is not true. It worked fine with raid5 with ubuntu 10.10 alternate installer and booted fine
[19:34] <psusi> sacarlson, you actually can boot from a raid5 these days
[19:34] <sacarlson> psusi: ok the article must be old
[19:35] <Martini> I need help with my Ubunut 10.10 language setting. I accidently changed the language to Russain, and when I (with some help from a russian friend) changed it back to english again, half the system remained in russian! some googling led me to the base-config command, but it seems that command was removed..
[19:35] <sacarlson> psusi: oh it's 2006
[19:35] <GeekSquid> !locale | Martini - see this
[19:36] <recon69_lap> right, updated bug report :) , later
[19:36] <Rypervenche> Martini: You probably have to have the language set system-wide.
[19:36] <Rypervenche> How can I make all of the combinations of all 26 letters plus 0-9 in Bash? I know I can do {A..Z} for the letters and {0..9} for the numbers, but how can I do them both in the same digit place?
[19:37] <Martini> i tried putting english_US systemwide, but I still have aplications in russian
[19:37] <psusi> Rypervenche, I normally use [A-Z] and you can just smash them together: [A-Z0-9]
[19:37] <capti> sacarlson: i would like to avoid creating multiple md arrays because of resize problems I saw. I must say that shrinking did not work ever.  This is why i tried making partitions under an md. It worked in trial just cannot install the system this way.
[19:37] <bioctoplasterio> anyone here use 10.10 for net book?
[19:38] <Martini> and oh, changing in locales I also tried, it didnt do much. dpkg-configure gives me an answer in russian that I cant understand
[19:38] <karthick87> !panels
[19:38] <nit-wit> bioctoplasterio, whats the problem  have the natty setup not 10.10
[19:38] <sprung> Hello. I am connected to my work VPN using nm-applet. Now, I want to connect to the datacenter VPN, which can only be done from within the work VPN. nm-applet won't let me try to connect to it, the VPN is greyed out. Does nm-applet only let me connect to one VPN at a time? What's going on here??
[19:38] <Rypervenche> psusi: It doesn't work with echo though. I basically wanted to make a file with all of the possible combinations each on a new line.
[19:38] <GeekSquid> Rypervenche: your question is strange, please describe what you are trying to do (same digit place???)
[19:39] <bioctoplasterio> right click doesn't seem to work, which makes it difficult for a linux beginner to do simple tasks..
[19:39] <bioctoplasterio> also, can't seem to drag-and-drop
[19:39] <sacarlson> capti: how do you make a partition under md?
[19:39] <yeats> bioctoplasterio: what model laptop?
[19:39] <bioctoplasterio> Asus EeePC 1005HAB
[19:39] <evalyn> hi
[19:40] <_DeZ_> ðåïåðîê òóò???
[19:40] <Neezer> I installed conky and have been running it just fine. after doing a reboot, the conky window is always on top of my other stuff...it is kind of annoying...how can I turn that off?
[19:40] <GeekSquid> sprung: not sure on that, seems like you'd need to use your work machine to connect to the datacenters VPN
[19:40] <Martini> ehm...localpurge seems like a good idea, only it hits me with a screen filled with russian....
[19:40] <_DeZ_> ðåïåðîê òóò???
[19:40] <Rypervenche> GeekSquid: For example, I'd like to make a text file with all of the possible combinations of A through Z and 0 through 9 in each digit. Say for example, for a 3-digit long number. It would have 36^3 possible combinations.
[19:41] <evalyn> i am so new to ubuntu and i cannot get things to work, I really do not know how to install these packages that i download
[19:41] <sprung> GeekSquid, untrue, the mac users can do it as can the windows users
[19:41] <nit-wit> bioctoplasterio, so where are you dragging and dropping to?
[19:41] <sacarlson> capti: and size?  you can make the raid any size you want,  you don't need to use the entire disk,  I guess you can keep a none raid partition also available
[19:41] <Rypervenche> GeekSquid: Just like [A-Z0-9][A-Z0-9][A-Z0-9] but I can't echo it into a file like that.
[19:41] <quiescens> Rypervenche: something like {{a..z},{0..9}}
[19:41] <nit-wit> bioctoplasterio, from and to?
[19:42] <_DeZ_> ðåïåðîê òóò?
[19:42] <Rypervenche> quiescens: That's the one :D Thank you.
[19:42] <capti> sacarlson: with gparted easily. eg. select /dev/md0. Device-create part. table, then create as many ext4 whatever i want. and resize with data easily
[19:42] <bioctoplasterio> from Documents to Trash
[19:42] <GeekSquid> Rypervenche: you could pipe as opposed to echo ... echo is for the screen, where | can go to a file
[19:42] <sprung> GeekSquid, i can connect to the work VPN, and at physical work, i can connect to the datacenter VPN. but i don't even have the ////option//// of selecting the datacenter VPN when connected to the work VPN. the datacenter VPN is ///greyed out/// in nm-applet
[19:42] <ccvp> hello
[19:42] <_DeZ_> ðåïåðîê òóò?
[19:42] <ccvp> dez, wtf?
[19:42] <evalyn> i got this to work thru the add remove software. that seems to work the best for getting stuff to work
[19:42] <capti> sacarlson: I just do not see why it not works from installer
[19:42] <evalyn> i will put this chat on my desktop and hope i can get some help thru irc chat
[19:42] <ccvp> 11.04 changing to "Nasty Narwahl"?
[19:42] <sacarlson> capti: ok under you don't mean inside
[19:42] <ccvp> lulz
[19:43] <nit-wit> bioctoplasterio, make sure you use the tab complete to ping, so no rught click to move to trash ethier
[19:43] <yeats> bioctoplasterio: is it a "clickpad" with simulated left/right buttons or does it have actual buttons?
[19:43] <Rypervenche> GeekSquid: Oh I see. Would it be too much trouble to ask exactly how I could do that? Having each number on a new line.
[19:43] <capti> sacarlson: inside. within or under
[19:44] <sacarlson> capti: the ext4 is outside the raid it's just on the same disk
[19:44] <bioctoplasterio> has actual left/right click buttons and a touch pad.
[19:44] <ccvp> How will Ubuntu run on Core 2 Quad 64bit, 6gig ddr3 and an older 7800gtx video card? I just got a new system, i7 870 12gig ddr3, and nvidia gtx 570 for main ubuntu gaming system, but will the Q9300 system(core 2 quad) be a decent ubuntu system? to screw around with?
[19:44] <capti> sacarlson: no it is inside md0. e.g it is called md0p1, md0p2 etc
[19:44] <bioctoplasterio> @nit-wit, sorry for a noob question, but what does "use the tab complete to ping:?
[19:45] <bioctoplasterio> er, what does that mean?
[19:45] <yeats> bioctoplasterio: ok - I had no right click in 10.10 with an HP with a clickpad (kernel-level issue)
[19:45] <yeats> !tab | bioctoplasterio
[19:45] <GeekSquid> Rypervenche: I really think this would be a better question for #bash
[19:45] <Rypervenche> GeekSquid: Ok, thank you.
[19:45] <sacarlson> capti: well if it's just an install problem just setup the install first and keep the needed number of partitions or free space left to change after install
[19:45] <sprung> Hello. I am connected to my work VPN using nm-applet. Now, I want to connect to the datacenter VPN, which can only be done from within the work VPN. nm-applet won't let me try to connect to it, the VPN is greyed out. Does nm-applet only let me connect to one VPN at a time? What's going on here??
[19:46] <GeekSquid> ccvp: woah! that kind of system should fly high and fast
[19:46] <mongy> ccvp, core2 is plenty enough
[19:46] <TyrantElf> GeekSquid, You were right!  the proprietary drivers did enable HDMI! Thank You!  only problem is that when I bring up blender, it is all static inside the window,  do you know any fix?
[19:46] <sacarlson> capti: ok I'll set one up in another virtualbox and try it
[19:46] <nit-wit> bioctoplasterio, you type the nick first coople of letter then hit tab
[19:47] <capti> sacarlson: it would be nice, but installer leaves the md0 looking as unpartitioned. As I see from gparted. the whenever i select: create partition table. guess if the installed system will be seen or not... ;-)
[19:47] <rof> rof
[19:47] <GeekSquid> TyrantElf: now take that question to #blender, like a good little ubuntu elf
[19:47] <capti> sacarlson: trap of22
[19:47] <bioctoplasterio> nit-wit, ha, that's nice.. Ok, so what I've been working toward today is going back to 10.04
[19:47] <ccvp> How will Ubuntu run on Core 2 Quad 64bit, 6gig ddr3 and an older 7800gtx video card? I just got a new system, i7 870 12gig ddr3, and nvidia gtx 570 for main ubuntu gaming system, but will the Q9300 system(core 2 quad) be a decent ubuntu system? to screw around with?
[19:48] <bioctoplasterio> can 10.10 be rolled back, or is that a re-install?
[19:48] <nit-wit> bi09?6zC97/@<+(
[19:48] <xangua> bioctoplasterio: no
[19:48] <GeekSquid> ccvp: please don't repeat, your question was answered ... that system should run great
[19:48] <yeats> bioctoplasterio: re-install, I'm afraid
[19:48] <sacarlson> capti: so what type of partition or raid should I setup as my root partition?
[19:48] <nit-wit> nit-wit, little leet
[19:49] <bioctoplasterio> ok, one more question... how do you share specific folders in 10.10 netbook?
[19:49] <ccvp> If i am going to make this 7800gtx Q9300 system
[19:49] <ccvp> be a media server type system, is western digital caviar Green sufficient?
[19:49] <ccvp> no need for WD Cav black?
[19:49] <xangua> bioctoplasterio: right clic > share¿
[19:49] <ccvp> 2TB Cav green = on sale at best buy 50% off today
[19:49] <bioctoplasterio> I have personal file sharing turned on so I can copy from my desktop to netbook, and I've even moved some files, but I have no idea where they are
[19:49] <bioctoplasterio> there's no right click in 10.10 netbook edition, apparently a kernel level issue
[19:49] <GeekSquid> ccvp: the green should be fine, good price too
[19:49] <capti> sacarlson: i tried the only choice is to have root selected as the whole md array. I could not make partition md0p1 within md0 from installer
[19:50] <ccvp> what are the blacks for?
[19:50] <sacarlson> capti: what do we really want one raid5 one raid1 and one ext4?
[19:50] <ccvp> high access servers, and gaming?
[19:50] <yeats> bioctoplasterio: you can go to your accessibility settings and set up simulated right click (by holding down left button) -FYI
[19:50] <bioctoplasterio> interesting...
[19:50] <sacarlson> yes an md is just like a partition you can't use 1/2 of sda1
[19:50] <bioctoplasterio> thanks yeats
[19:50] <KM0201> bioctoplasterio: thats cuz netbook sucks
[19:50] <KM0201> lol
[19:50] <wolf23> hi guys
[19:51] <wolf23> happy new year 4 al
[19:51] <GeekSquid> ccvp: essentially the same drive, only better at bursting when traffic is high, However the OS isn't fast enough to take advantage of it, nor is the FSB
[19:51] <KM0201> wolf23: u 2.. :)
[19:51] <yeats> bioctoplasterio: that issue for my HP shouldn't be the same for yours... if you have actual buttons, they should work - you might want to do some Google/Ubuntu Forums searching
[19:51] <wolf23> KM0201,  :)
[19:51] <capti> sacarlson: what i like to have is: one md0 with 3 phy disks. md0p1 for root md0p2 for home md0p3 for pictures etc. md0p1..md0pN with EXT4 FS
[19:52] <wolf23> anyone help me how to open jpg.rem files on ubuntu?
[19:52] <sacarlson> capti: what type of raid are they?
[19:52] <bioctoplasterio> yeah, I've been doing some of that...either I'm a moron when it comes to searching for Ubuntu netbook issues, or there isn't much about it yet.
[19:52] <capti> sacarlson: only one raid5 array
[19:52] <kcorcoran> sloyboots:  i am reading the wiki for sabnzbplus, and it states i will have a wizard appear at first run - this does not happen.  any ideas?
[19:52] <sacarlson> capti: so we just want 2 raid5 and one ext4?
[19:52] <skullboy> ok so how do i remove libjpeg62 without loseing lots of other apps
[19:53] <eXpl0it3r> is there a way to get applications started on diffrent real screens?
[19:53] <kcorcoran> slyboots:  i am reading the wiki for sabnzbplus, and it states i will have a wizard appear at first run - this does not happen.  any ideas?
[19:53] <sacarlson> capti: ok so you would be happy with my first?
[19:53] <sacarlson> capti: how big would you like each raid and ext4?
[19:54] <kcorcoran> goetter:  i am reading the wiki for sabnzbplus, and it states i will have a wizard appear at first run - this does not happen.  any ideas?
[19:54] <eXpl0it3r> i tried the DISPLAY environment variable, but it alsways outputs: cannot open display: :0.1
[19:54] <GeekSquid> eXpl0it3r: program :0    program:1
[19:54] <sacarlson> capti: how big should I setup my 3 simulated hard disks to be?
[19:54] <capti> sacarlson: sorry. not. I was not clear enough. one RAID5 array a big one. It will be /dev/md0. then create partitions under md0. called /dev/md0p1 for root which is ext4, then another partition called /dev/md0p2 for home with ext4 FS
[19:55] <wolf23> how can i open my jpg.rem files from my blackberry, thanx
[19:55] <d4rkc0r3> hello all
[19:55] <bioctoplasterio> yeats, looks like another user had the same right click issue on an Acer net book: http://www.linuxjournal.com/content/ubuntu-1010-maverick-meerkat-one-hit-one-miss
[19:56] <iConfused> I know this probably isn't the proper location to ask, but, does anyone have experience running WoW under wine in here? (If this, y'know, isn't the right place to ask, could you tell me where I /should/ go?)
[19:56] <eXpl0it3r> GeekSquid: that doesn't work the app then tries to open :0 or :1 ;)
[19:56] <goetter> anyone have a suggestion for a usb network controller to use on a NAS box? i just found out my laptop's port is fried (was intending to use it as NAS)
[19:56] <goetter> :<
[19:56] <vlt_> wolf23: What type of files are these?
[19:56] <sacarlson> capti: well we will cal my 2 ext4 partitions sda5 and sdb5  and the one big raid5 mdX
[19:58] <GeekSquid> goetter: does your laptop have a PCMCIA slot?
[19:58] <wolf23> vlt_,  files shooting from my blackberry, i have copy paste them to my pc,but the files cannot open coz they are jpg.rem format
[19:58] <goetter> GeekSquid: oh yes, it does
[19:58] <vlt_> yeats: I'd reccommend using LVM on top of raid instead of creating partitons on /dev/md0
[19:58] <goetter> yes that would be better :3
[19:58] <GeekSquid> goetter: they make a USB 2.0 PCMCIA ... pretty cheap on ebay
[19:58] <bioctoplasterio> how do you add a launcher to the vertical dashbar in 10.10 for netbook?
[19:58] <vlt_> wolf23: What kind of data is this?
[19:59] <goetter> why would i want that -_- i just want an ethernet port not a usb port
[19:59] <wolf23> vlt_,  dont know
[19:59] <capti> sacarlson: sorry but not. /dev/sda5 is a partition does not belong to md0, but a partition on a phy disk
[19:59] <vlt_> wolf23: What does `file <your_file.jpg.rem>` say about it?
[19:59] <betarepeating> trying to share my netbook's wifi connection with my xbox 360 over crossover cable, followed the site instructions to share in network manager, it doesn't work. any help?
[20:00] <capti> sacarlson: the term /dev/md0p1 is exactly the same as used in gparted
[20:00] <yeats> vlt_: that wasn't me ;-)
[20:00] <Sadin> could anyone help mne with an error my server is giving me
[20:00] <sacarlson> capti: see my pm
[20:00] <yeats> bioctoplasterio: good - glad you could find a lead
[20:00] <wolf23> they come from the camera blackberry
[20:01] <Sadin> when i start up my server i get the following error :unknownfilesystem
[20:01] <Sadin> ould anyone help me?
[20:01] <goetter> any recommendations for a good pcmcia nic for use in an ubuntu nas?
[20:01] <vlt_> wolf23: I know, but your computer doesn't care where something comes from. You need to know what type of data this is.
[20:02] <brianmunk> can anyone recomend a good video-file editor program to cut parts out of an mpeg-ts file, like commercials etc?
[20:02] <Slyboots> fucking ubuntu
[20:02] <Slyboots> Honestly
[20:03] <Slyboots> Where are my god damn titlebars!
[20:03] <Slyboots> I just installed 400mbn of CRAP on a headless sever; and STILL no titlebars
[20:03] <KM0201> Slyboots: well, swearing about it won't make them appear, i promise
[20:03] <GeekSquid> goetter: I thought your USB was dead ... strike that ... they make a Ethernet that will fit into that PCMCIA slot.... but you knew that
[20:03] <betarepeating> KM0201: it's worked before
[20:03] <Slyboots> Well I feel slightly better about it
[20:03] <Slyboots> :(
[20:04] <KM0201> betarepeating: then you should've kept notes on how you made it work
[20:04] <guntbert> iConfused: try #winehq for wine questions
[20:04] <quiescens> o.o
[20:04] <iConfused> guntbert, thankies.
[20:04] <Slyboots> Metacity is running.. its not producting any errros
[20:04] <Slyboots> Im just not getting the blasted title-bars
[20:05] <GeekSquid> Slyboots: in terminal: compiz --replace-metacity
[20:05] <Slyboots> I dont have compiz installed
[20:05] <GeekSquid> Slyboots: it comes standard
[20:05] <ccvp> weird, when my secondary system is booting up ubuntu 10.10(64bit) on q9300 system, horizontal graphics lines...never had this happen before, could using a crt to dvi connector, so monitor can connect to dvi port on 7800gtx, cause ubuntu to have a glitched setup/install? and freeze the whole process?
[20:05] <Slyboots> Im running this though FreeNX; which doesnt have 3d accleration
[20:06] <GeekSquid> Slyboots: system>Preferences>Appearence... Visual Effects tab ... set to none
[20:06] <Sadin> Anyone have time to help with this weird error im getting?
[20:06] <Slyboots> Compiz FAILED - No composit extension.. Launching fallback window manager
[20:06] <Slyboots> Its already set to None
[20:07] <guntbert> !ask | Sadin
[20:07] <Gartral> can anyone help me with a synaptics touchpad problem?
[20:08] <guntbert> !anyone | Gartral
[20:08] <BEAST_MODE> HACK ZE PLANET
[20:08] <BEAST_MODE> HAHAHHA
[20:09] <Sadin> ok
[20:09] <bullgard4> [GNOME, Maverick] Using drag-and-drop I tried to move several files in a directory. This operation ended prematurely. Now each time when I am trying to move files by drag-and-drop Maverick will remind me of the unfinished operation. How can I make GNOME to forget that?
[20:09] <Sadin> Why am i getting this error unkownfilesystem and how can i fix it
[20:09] <Slyboots> Anyone any notion why..?
[20:10] <Gartral> guntbert, that's the problem, i dont know where to start, the touchpad settings in Mouse under System>Prefereces isn't there
[20:10] <Diamondcite> sadin, Not enough information, what is giving unknown file system where and when?
[20:10] <Spaztic_One> how can I easily resize the monitor (resolution) in terminal?
[20:10] <Diamondcite> Spaztic_One: Have a look at xrandr
[20:10] <BEAST_MODE> oR Black Ops attack
[20:10] <BEAST_MODE> hit subnet RQ170
[20:11] <psusi> !ops
[20:11] <Sadin> my system wont start when i power on my server is says unkown filesystem
[20:11] <KM0201> !ops | BEAST_MODE
[20:11] <rww> BEAST_MODE: This channel is for Ubuntu technical support. Please take nonsense elsewhere.
[20:11] <GeekSquid> Gartral: I trust you have xserver-xorg-input-synaptics installed?
[20:11] <Diamondcite> Sadin: Did you change anything recently? Or maybe experience a blackout?
[20:11] <Slyboots> Help me Tom Cruse! Use your Voodoo powers to fix Metacity!
[20:11] <Sadin> No diamond
[20:12] <KM0201> Slyboots: lol..
[20:12] <rww> Slyboots: You too ;P
[20:12] <Slyboots> I cant figure out why Metacity isnt drawing any titlebars
[20:12] <Diamondcite> Sadin: So you just started up the system as normal and it reports unknown file system?
[20:12] <Gartral> GeekSquid, yes! and current version
[20:12] <BEAST_MODE> eat RHINO COCK & SHINE MY SHOES
[20:12] <Sadin> im trying to install ubuntu desktop over my old server but i can startup my server because of this error plus my usb installer does not install ubuntu when i choose the option it runs ubuntu in my frashdrive
[20:12] <Sadin> and yes i started the computer normally
[20:12] <aimio> when i do aplay -l i get no soundcards found, how do i fix that ?..
[20:13] <bullgard4> Slyboots: Try to extract any error messages by using an equivalent command-line command.
[20:13] <guntbert> Gartral: what kind/make of touchpad/notebook?
[20:13] <gobbe> Sadin: please give whole error
[20:13] <Diamondcite> Sadin: If you start it up with a flash drive, does gparted see the partitions on the server drive?
[20:13] <Slyboots> There ARNT any; I've run metacity --replacee from the cli
[20:13] <GeekSquid> Gartral: next step try gpointing-device-settings
[20:13] <Sadin> well
[20:14] <Slyboots> It enver outputs any error messages
[20:14] <IdleOne> Slyboots: hit alt-f2 and type "metacity --replace" no quotes in the box see if that helps
[20:14] <Sadin> the error im getting when i boot system normally is just error :unkown filesystem then grub resue>
[20:14] <Gartral> guntbert, latest generation synaptics pad, unknown model.. laptop is a Google CR-48 Chrome testbed unit...
[20:14] <IdleOne> Slyboots: oh, never mind
[20:14] <Slyboots> Ah now.. this is intresting
[20:14] <Sadin> i dont get errors when i try to install desktop from flashdrive it just doesnt install and instead laucnhes ubuntu from the flashdrive
[20:14] <Slyboots> It works in VNC
[20:15] <Slyboots> But not FreeNX
[20:15] <guntbert> Gartral: follow GeekSquid please ....
[20:15] <aimio> is there anyone that can help me?
[20:15] <aimio> :S
[20:15] <Diamondcite> Sadin: I'm wonder if the hard drive in the server is still working properly.
[20:15] <Gartral> GeekSquid, installed, already newest
[20:15] <Sadin> if it isnt how might i fix it
[20:16] <Gartral> GeekSquid, , latest generation synaptics pad, unknown model.. laptop is a Google CR-48 Chrome testbed unit...
[20:16] <aimio> i have a lenovo ideapad s10-3t - sound is not working. i have added line to alsa,base,conf.. and in need of assistance please..
[20:16] <GeekSquid> Gartral: lspci lsusb pastebin (1000's of people are waiting for this information)
[20:16] <Diamondcite> Sadin: Would you mind trying to reparition the drive and do a full format on it? (This WILL ERASE ALL DATA)
[20:17]  * aimio running ubuntu 10.04.
[20:17] <KM0201> Slyboots: try disabling compiz, see if that gives you window bars.
[20:17] <Sadin> how would i dop that if my system wotn start...
[20:17] <bullgard4> !sound | aimio
[20:17] <Diamondcite> Sadin: Start with the flash drive and use the utilities that come with it.
[20:18] <Sadin> alright i will try that
[20:18] <aimio> i have tried all that..
[20:18] <Diamondcite> Sadin: There should be an app that handles partitioning called gparted.
[20:18] <lboken> hi all
[20:19] <Sadin> alright ill let you know in a few minutes if it doesnt work
[20:19] <Gartral> GeekSquid, generating a full rundown of lsxxx lists
[20:19] <infid> i love how everyone at work used to look at me like a dinsosaur for using vim/linux and now all the new generation wants to use it
[20:19] <lotus-blade> I want to set up xdmcp so that I can have clients access thier desktop from other terminals and clients.  how would I do this with gdm?
[20:19] <lboken> i would like to know wish ftp deamon  i should use for my ftp server  on my linux  wish one is easy to configure and all
[20:19] <Diamondcite> Sadin: Unfortunately I won't be active in a few minutes =/
[20:19] <Sadin> ok thats fine
[20:19] <Sadin> thanks for all your help
[20:20] <mongy> lboken, vsftp is about as easy as it gets.
[20:21] <Gerritjan> Hello
[20:21] <lboken> k thanks mongy ill look for it
[20:21] <Gerritjan> I'd like to install the JRE, but I don't know how?
[20:21] <Gerritjan> How to install it
[20:21] <Gartral> GeekSquid, sorry for the delay, settingup pastebinit
[20:21] <mongy> Gerritjan, enable the partner repo and install sun-java6-plugin
[20:21] <Slyboots> Okay..
[20:22] <Gerritjan> How can I enable it, mongy?
[20:22] <rww> !partner | Gerritjan: enable this, install sun-java6-jre
[20:22] <mongy> ^^ that
[20:22] <Slyboots> So; Metaframe works if I connect to the Xserver via VNC; but it seems that whatever FreeNX does to create the session breaks Metacity
[20:22] <GeekSquid> Gartral: NP... dmesg too if you dont mind
[20:23] <delinquentme> is there a way to consistently SSH into a computer that has a dynamic IP?
[20:23] <Gerritjan> How can I enable the partner repo?
[20:24] <vlt_> delinquentme: dyndns
[20:24] <lboken> delinquentme do you have a routeur who can connect    you to a ddns? also knows as dyndns
[20:24] <SimpsonTP> tried various pointers, but stil nautilus shows up in a mixture of dutch / english
[20:24] <Slyboots> .. I raeally hate linux sometimes
[20:25] <guntbert> Gartral: did you see https://help.ubuntu.com/community/SynapticsTouchpad  (section "troubleshooting") ?
[20:25] <bullgard4> [GNOME, Maverick] Using drag-and-drop I tried to move several files in a directory. This operation ended prematurely. Now each time when I am trying to move files by drag-and-drop Maverick will remind me of the unfinished operation. How can I make GNOME to forget that? nautilus loads the CPU very much.
[20:26] <Gartral> GeekSquid, lspci:  http://pastebin.com/guqJiSR7 lsusb: http://pastebin.com/AMdC8Ugx lshw (Root!): http://pastebin.com/sJkjg3Km lscpu: http://pastebin.com/Mtvj1k9f lsmod: http://pastebin.com/Yyk30pTd dmesg: http://pastebin.com/bqMxWqAu
[20:27] <h4f> is there a way to record kernel panic info ?
[20:27] <nothings1ecial> delinquentme: depends what you mean, try byobu
[20:28] <GeekSquid> Gartral: reading something off a forum ... says lower right of touchpad is right-click
[20:28] <Gartral> GeekSquid, I dont like that, i want my multitouch! >.<
[20:28] <rww> h4f: Don't crosspost to multiple channels, please. Pick the one that applies to you (Ubuntu 10.10 or below here, Ubuntu 11.04 in #ubuntu+1) and use it.
[20:29] <Gartral> guntbert, i saw that
[20:29] <h4f> rww: sorry I thought there are more people here. wont do that any more
[20:30] <Gerritjan> How do I enable the partner repository
[20:30] <Slyboots> Must be a FreeNX bug
[20:31] <rww> Gerritjan: use the command ubottu already told you, sudo add-apt-repository "deb http://archive.canonical.com/ $(lsb_release -sc) partner"
[20:32] <GeekSquid> Gartral: cat /proc/bus/input/devices please
[20:32] <GeekSquid> Gartral: Running 10.10? yes?
[20:33] <quebecois> hi
[20:33] <Gartral> GeekSquid, yea
[20:33] <quebecois> can somebody help me with c++?
[20:33] <rww> quebecois: ##c++ can
[20:33] <quebecois> thanks
[20:35] <Gartral> GeekSquid, IDevices: http://pastebin.com/eajUjbcg
[20:36] <sudipta> hi
[20:36] <bullgard4> [GNOME, Maverick] Using drag-and-drop I tried to move several files in a directory. This operation ended prematurely. Now each time when I am trying to move files by drag-and-drop Maverick will remind me of the unfinished operation. How can I make GNOME to forget that? nautilus loads the CPU very much.
[20:38] <GeekSquid> Gartral: have you seen this http://ubuntu-snippets.blogspot.com/2009/03/multi-touch-for-anyall-synaptics.html ... might get those events to be seen by the os
[20:38] <cozziemoto> bullgard4,  when trying to move another file  ...does the dialog offer  finishing the prior unfinished move?/
[20:38] <bullgard4> cozziemoto: Yes.
[20:38] <cozziemoto> bullgard4,  and you have already tried to finishe the prior move with no success?
[20:39] <bullgard4> cozziemoto: Yes.
[20:39] <aimio> what does it mean when i don't have a sound card in the sound preferences->hardware. but i have all the drivers and so on set. what is there more to do :S
[20:39] <cozziemoto> bullgard4, mm  was the prior move to an external drive maybe?
[20:40] <Gartral> GeekSquid, that's all HAL related though.. isn't hal depreciated?
[20:40] <bullgard4> cozziemoto: From an audio CD to an external USB drive.
[20:40] <GeekSquid> Gartral: isn't init depricated in your case?
[20:40] <mats990> hi. does anbody knows how can i edit the shutdown menu in gnome 2.32.0? i would like to add one other choice "restart to windows" which will start script to restart the computer
[20:40] <cozziemoto> bullgard4,   is the external usb driver plugged in when the you try to finish the prior move?
[20:40] <cozziemoto> drive
[20:41]  * aimio hates alsa..
[20:41] <bullgard4> cozziemoto: Yes.
[20:41] <skullboy> ok so how do i remove libjpeg62 without loseing lots of other apps
[20:41] <cozziemoto> bullgard4,   then I am puzzled,,, i would have assumed the cd contents would have been cashed  on the system and awaiting the usb driver for finishing... did you try to drag and drop the same files in the same way to the same drive
[20:41] <ocean> hi guys. i was trying to install ubuntu on my new hp laptop.used g parted to resize the and get some free space. freed the spaces alright and is showing up as an ullocated space. i wanted to configure this unallocated space and whn i choose this unallocated space all the tools go greay and i am not able to format this space at all.g parted keep saying that it is not possible to create more than 4 primary partitions.how can i get around this issue.thanks in a
[20:41] <ocean> dvance guys
[20:42] <shcherbak> mats990: it means you need to update grub on logout (every time), faster is to hit shift
[20:42] <Gartral> GeekSquid, just initramfs
[20:43] <aimio> when i try cat /proc/asound/cards i get no such file or dir.. ( how do i fix this ) ??????????????
[20:44] <mats990> shcherbak: i dont thinks so... couse i would like to press the button and go to a toillette and not to wait :D
[20:44] <GeekSquid> Gartral: /etc/hal/fdi/policy exists, and you should be able to write that( or similar ) into that folder ... Most of hal is depricated... and until some dev gets done this may be the only way to do what you want
[20:44] <Kartagis> when I try apt-get install anything, linux-image-2.6.35-23-generic tries to install itself but fails. how can I get rid of this behaviour?
[20:44] <smallfoot-> o
[20:44] <Gartral> GeekSquid, alright, i'll try
[20:45] <Gartral> GeekSquid, there's another problem
[20:45] <ShootEmUp> test
[20:45] <Gartral> GeekSquid, synclient -m 100 says there's not synaptics driver loaded
[20:45] <aimio> GeekSquid, can you assist me please.
[20:46] <aimio> when i try cat /proc/asound/cards i get no such file or dir. why does this happen and how to fix it..
[20:47]  * Slyboots starts or ub whats left of his sanity
[20:47] <Slyboots> Need a VNC client that supports XRender
[20:47] <bullgard4> cozziemoto: No, I did not. After Maverick stuck I looked what files were already copied completely. Then I  usually copied the unfinished first file that was not completely copied. And I was always successful. Then I tried to copy the rest files using drag-and-drop. Usually I was successful but the copy dialog reminded me that there was allegedly at least one unfinished copy process.
[20:47] <Slyboots> freeNX doesnt work
[20:47] <Random75> How do you hide the terminal when you start a program using it?
[20:47] <shcherbak> Random75: you mean gnome terminal?
[20:47] <Gartral> GeekSquid, it's a two-line error, may i paste it here?
[20:48] <GeekSquid> aimio: ask the channel, seems like your hardware is not being recoginzed
[20:48] <Random75> shcherbak: yeah
[20:48] <cozziemoto> bullgard4,  mm then I am puzzled...  I cant find any reference to this issue
[20:48] <GeekSquid> Gartral: yes, but copy it into one line with a couple of ## between them
[20:48] <shcherbak> Random75: and you want to minimize it?
[20:48] <shcherbak> Random75: Alt-Space
[20:48] <cozziemoto> bullgard4,   if no one can help here scoot over to the ##linux channel or  even #gnome  here on freenode or  #gnome on gimpnet server
[20:49] <aimio> GeekSquid, can that happen when drivers fail or is that beacuse of something else ? beacuse it was working before but i did something to mess it up :S
[20:49] <Gartral> Can't access shared memory area. SHMConfig disabled? ## Couldn't find synaptics properties. No synaptics driver loaded?
[20:49] <oneliner> where should i get started if i want to learn about midi in ubuntu?
[20:49] <GeekSquid> Gartral: w/sudo?
[20:50] <Gartral> GeekSquid, keep in mind too, that because of the nature of the chrome kernel, I'm FORCED too use that kernel, and not the ubuntu standard
[20:50] <bullgard4> cozziemoto: I do not know the word "to scoot over". Why is the #linux channel any better suited? My experiences withe the #gnome channel ion gimpnet are discouraging.
[20:50] <Gartral> GeekSquid, same error
[20:50] <delinquentme> so i go to run the command " sudo service ssh status " and i get back that ssh is " unrecognized service " however im sure ssh is on my computer bc im using github .. any idea why its not liking this ssh command?
[20:51] <cozziemoto> bullgard4,   scoot means to  move to .... ##linux should be much better
[20:51] <Myrtti> delinquentme: how about sshd
[20:51] <shcherbak> delinquentme: sudo netstat -tulp
[20:51] <delinquentme> sshd same thing
[20:52] <GeekSquid> Gartral: I caught that, seems like a kernel mismatch, in the way that ubuntu/chrome handles things... you may need to recompile some things under the chrome kernel.. and is really beyond my scope of knowledge
[20:52] <delinquentme> shcherbak, http://pastie.org/1421940
[20:53] <Gartral> GeekSquid, thats a hassel.. this machine only has a 16 gb ssd.. 6 of that is currently used for ubuntu
[20:53] <shcherbak> no ssh
[20:53] <aimio> i will give $60 to the person who helps me fix my sound problem..
[20:53] <shcherbak> delinquentme: ^^
[20:53] <GeekSquid> aimio: I'd reccomend running lsmod in your current OS and then doing the same thing under the Live disk to see if anything is missing from your config, cause it worked under the live disk, right?
[20:54] <Slyboots> Okay; I've tried stripping out Gnome..
[20:54] <Slyboots> But its still showing up in a broken form in vnc
[20:54] <Slyboots> Things like the background.. and the file manager and icon
[20:54] <delinquentme> shcherbak, does that mean its not running as a process? and i need to start it up?
[20:54] <Slyboots> So.. metacity? how to I remove that
[20:55] <bullgard4> cozziemoto: Thank you very much for your sympathetic comments.
[20:55] <shcherbak> sudo /etc/init.d/ssh restart
[20:55] <shcherbak> delinquentme: sudo /etc/init.d/ssh restart
[20:55] <aimio> GeekSquid, nah it was working sort of last night " the built in speakers where working, but not when plugged in the headphone jack, then i started to mess with the drivers, i installed oss,pulseaudio,alsa, and what not.. then when i made a reboot, the sound was completly gone.
[20:55] <Gartral> GeekSquid, there's a syntp driver that's in the chrome drivers, unfortuently, it's not a free object, and i dont know how to force load it without documentation
[20:57] <delinquentme> shcherbak, should i have a shh file in that dir? ubuntu 10.04?
[20:57] <GeekSquid> Gartral: seems like google is taking a Apple/Darwin/IOS locked down approach to their OS, and test hardware, which means that technically your arn't running ubuntu, as the kernel is ChromeOS.... Another thought, do you still have a Complete chrome file system, perhaps you can load that syntp.so (guess) into the appropriate /var/lib and load it with modprobe
[20:59] <wolfric> how do multiple desktops work on duel monitors?
[20:59] <delinquentme> actually i got it shcherbak
[20:59] <delinquentme> thanks!
[20:59] <f10d0r> wolfrix just use workspaces
[20:59] <Slyboots> Okay; Ayone have *any* idea how the hell you get "Xrender" working in a VNCserver
[20:59] <Slyboots> Thats all I need.. Xrender
[21:00] <aimio> ;/
[21:00] <wolfric> f10d0r: same thing
[21:00] <GeekSquid> aimio: loose oss and pulse, stick with the alsa, alsamixer is what you would use to switch to the headphone port (probably as sudo)
[21:01] <aimio> GeekSquid, the problem is i'm not sure how i can completely delete oss, and pulse drivers from my system..
[21:01] <aimio> ::S
[21:01] <mdmkolbe> Is there a way to set the sensitivity and acceleration of my mouse separately from my touch pad?
[21:01] <GeekSquid> aimio: sudo apt-get remove --purge packagename
[21:01] <Gartral> aibolit, sudo apt-get purge oss pulseaudio
[21:02] <wolfric> Do duel monitors have to be treated like this? http://www.youtube.com/watch?v=7GeMiWucx6w (as one big workspace) or can you have a seperate workspace per monitor
[21:02] <Gartral> aimio, , sudo apt-get purge oss pulseaudio
[21:02] <aimio> oh lol i did knew that command :S
[21:02] <aimio> thanks anyway for reminding me.
[21:03] <sucssi> Hello everyone, I'm having a wierd problem. I assigned 60GB to Ubuntu yesterday and now it says is full. I only used 5GB tops. Anyone has any ideas)
[21:03] <Slyboots> Anyone know how I can see any broken packages in Aptitude?
[21:03] <gobbe> sucssi: what says df -h
[21:03] <Ziber> If I have a box that has two harddrives in it, how can I access the second one?
[21:03] <gobbe> sucssi: put it to pastebin
[21:03] <System_Default_0> sucssi: Which version of Ubuntu are you using?
[21:04] <wolfric> sucssi: what do you mean assigned? try disk usage analyzer to see how it's used
[21:04] <_dev_null_> sucssi: have an fsck ? <-- this is my 'any' idea
[21:04] <sucssi> gobbe: http://pastebin.com/Vx3S9DYx
[21:04] <sucssi> System_Default_0, version 10
[21:05] <GeekSquid> Ziber: has the second one been formatted/partitioned? if not you will need to format it with gparted, which is not installed by default... then it will become available
[21:05] <System_Default_0> sucssi: 10. What?
[21:05] <Gerritjan> Hello, how can I install the latest Qt binaries?
[21:05] <sucssi> wolfric, I tried that. I mean, a set up a 60GB partition. I tried using disk analazyer but it shows / as full, but it does not specify where
[21:05] <Ziber> GeekSquid: the HD was used on another box, but for what it was doing (simply a firesharing server), I figured I'd just move it.
[21:05] <sucssi> System_Default_0, 10.4
[21:06] <GeekSquid> Ziber: does it show up in /media .. perhaps a mount -a to get starteed
[21:06] <sucssi> System_Default_0,  sorry my bad, 10.10
[21:06] <Ziber> only thing is /media is cdrom and cdrom0
[21:06] <System_Default_0> sucssi: Do you installed it from a Live CD? Or an USB?
[21:06] <sucssi> System_Default_0, from a live CD
[21:07] <gobbe> sucssi: you didn't run it with flag -h
[21:07] <artur> czesc
[21:08] <aimio> lol now even my sound icon in the tray is gone :S it seems like i just make it worse everytime :P
[21:08] <GeekSquid> sucssi: seems like you did 6 gigs instead of 60 ... boot to live disk, use gparted to resize the partition to 60
[21:08] <magicianlord> aimio: which distro
[21:08] <_dev_null_> sucssi: "find / -xdev -size +100000c"
[21:08] <gobbe> sucssi: anwyay, you have 6 gigs for /, not 60
[21:08] <System_Default_0> sucssi: Well, you can use Gparted for checking partitions properties. Or you can use the
[21:08] <System_Default_0> Palimpsest Disk Utility.
[21:08] <sucssi> oh crap
[21:08] <sucssi> my bad
[21:08] <Xintruder> would open office be the best office suite on ubuntu?
[21:09] <magicianlord> yes
[21:09] <Gerritjan> I'd like to install Qt 4, how do I do this?
[21:09] <age> Hello. Why do fonts in Chromium/Firefox not respect system font settings? I have hinting set to Full, but it appears different in chromium. Fresh 10.04 install here, tried both default Chromium and stable from PPA.
[21:09] <aimio> magicianlord, ubuntu 10.04 - lenovo s10-3t ideapad.
[21:09] <sucssi> Ill give it a go, sorry and thank everyone
[21:09] <ZeiP> Xintruder, it's probably has most features
[21:09] <GeekSquid> Xintruder: for most people oo.org is more than they need, I actually use it alot
[21:09] <ZeiP> Xintruder, the best one is a question that can be debated forever without any actual answer :)
[21:09] <Xintruder> GeekSquid: its better than open office?
[21:09] <h-dee> Hi...I'm in trouble. I'm a newbie not a hotshot in linux. I was trying to install a CMS in my /var/www (LAMP installed and working), but it wasn't working so I tried changing the permissions/owner of directories, and I changed owner for /var/ to local user RECURSIVELY. Now after I restrated, it showed up with .ICEAuthority error. Tried changing owner back to root, but didn't reolved.
[21:09] <GeekSquid> Xintruder: oo.org = openoffice.org
[21:09] <ZeiP> Xintruder, openoffice = openoffice.org
[21:10] <Xintruder> oh sorry lol
[21:10] <magicianlord> aimio: 10.04 has issues with the sound menu. 10.10 is better in that regard. try 10.10
[21:10] <Gerritjan> Never mind, already found the binaries, installing it now :)
[21:10] <yorf> Good evening, I'm able to transfer or view a bit of video from my USB video camera but in less than a minute everything halts and I eventually get "Error splicing file: Input/output error."
[21:10] <Gerritjan> I'm looking for an IDE to develop C++ in, can you recommend me one?
[21:10] <GeekSquid> h-dee: ownership recursively of /var/www should be www-data
[21:10] <bullgard4> Gerritjan: You do not install primarily files but packages. So find out what packages include Qt files. You can that by searching in Synaptic for packages having "Qt" in its name or description.
[21:10] <aimio> magicianlord, i'm not sure how to make a upgrade without losing my files so i can't do that before i learn that..
[21:11] <milamber> h-dee: http://ubuntuforums.org/showthread.php?t=54181
[21:11] <h-dee> GeekSquid: Sorry, din't got you.
[21:11] <bullgard4> Gerritjan: You do not install primarily files but packages. So find out what packages include Qt files. You can do that by searching in Synaptic for packages having "Qt" in its name or description.
[21:11] <guntbert> !ide | Gerritjan
[21:11] <damagednoob> how do identify the name of a program from the gnome launcher menu?
[21:11] <damagednoob> how do i*
[21:11] <h-dee> milamber: Thanks, let me see
[21:11] <GeekSquid> h-dee: the ownership of your CMS should be set to www-data
[21:11] <Gerritjan> I'd like to build GUI's at a gnome desktop
[21:11] <Gerritjan> Which one shall I use then?
[21:11] <guntbert> damagednoob: right click on the ubuntu icon, select edit menues,....
[21:12] <Gerritjan> I don't like to use a terminal based one
[21:12] <damagednoob> ta guntbert
[21:12] <magicianlord> aimio: you download the 10.10 iso from the website, use the startup usb creator to put i on hte flash drive, then copy your old files to a directory on that flash drive, then you restart, boot from usb, and install
[21:12] <milamber> Gerritjan: what language do you want to program in?
[21:12] <Gerritjan> C++
[21:12] <guntbert> Gerritjan: try them, use what you like :-)
[21:12] <h-dee> GeekSquid: Actually, the CMS was what I was trying to do, but now the problem is with the system when i changed /var owner to my local user which was previously root. It throwed ICEAuthority error at logon everytime.
[21:12] <age> Gerritjan: I'd try Anjuta, it has a graphical interface designer also.
[21:12] <bullgard4> damagednoob: Read the associated package desriptions one after the other. You can narrow down by selecting certain application categories.
[21:12] <aimio> magicianlord, i shall try
[21:12] <damagednoob> Gerritjan, there's Qt and Gtk frameworks
[21:12] <ShootEmUp> HAPPY NEW YEAR!
[21:13] <Gerritjan> Is Qt a good idea for gnome applications?
[21:13] <bullgard4> ShootEmUp: Same to you!
[21:13] <Slyboots> Does anyone; have *nay* idea.. how you enable "Xrender" over a vnc4server session
[21:13] <age> Gerritjan: No, GNOME uses Gtk+.
[21:13] <GeekSquid> h-dee: you screwed up your var directory by setting it to user... this is not easily fixable, I'd reccommend reinstalling
[21:13] <milamber> Gerritjan: in my opinion, the *easiest* way to get started is Qt Creator. it has a lot of good code examples built right in. the other gui option is gtk (which is installed by default)
[21:13] <age> So, no-one getting blurry fonts in Chromium.
[21:13] <Slyboots> I've been looking into this for nearly 5 days and Im no closer to figuring uot how to enable it
[21:13] <magicianlord> yes
[21:14] <Gerritjan> Are there also tutorials for GTK?
[21:14] <Gerritjan> If yes, can you pass me a link? :)
[21:14] <magicianlord> Slyboots: what is xrender=
[21:14] <Gerritjan> And further, is it compatible with C++?
[21:14] <h-dee> GeekSquid: Would reinstalling means I need to reinstall all those apps again? Or is there something like 'Repair Windows' in Linux too (Windows background)
[21:14] <Slyboots> magicianlord: ... a video render method?
[21:14] <Slyboots> I've nof reaking idea
[21:14] <milamber> Gerritjan: http://library.gnome.org/devel/gtk-tutorial/2.90/
[21:14] <Gerritjan> Thank you
[21:14] <Qation> Can someone help me running docky? this is the error it gives: http://pastie.org/1421933 and I have dbus running
[21:14] <Slyboots> Just keep getting an error "Cant do Alphabeld without XRender
[21:14] <dsnyders> Hi all!  How do I merge to files side by side: eg  file1line1file2line1\nfile1line2file2line2 etc?
[21:15] <age> Gerritjan: There are bindings for Gtk+ to C++ -- gtkmm
[21:15] <otterpat> hello i have a problem
[21:15] <Gerritjan> Gtkmm, and is that also installed by default at Linux?
[21:15] <geirha> dsnyders: paste -d ' ' file1 file2
[21:15] <Gerritjan> Ubuntu*
[21:16] <milamber> Gerritjan: no. all of the documentation for gtk is at www.gtk.org
[21:16] <Gerritjan> Ok
[21:16] <GeekSquid> h-dee: start from scratch, you could create a package list from Synaptic and backup /var/cache/apt/archives to reinstall your apps so you don't have to dl them again
[21:17] <yorf> Hey, I can transfer or view a bit of video from my USB camcorder but in less than a minute everything halts
[21:17] <Gerritjan> And where can I find documentation for GTKMM?
[21:17] <age> Gerritjan: even if ther are not, you can easily install them.
[21:17] <milamber> !clone | h-dee
[21:17] <age> Gerritjan: http://www.gtkmm.org/en/
[21:18] <Gerritjan> Ok, then I'll start reading there
[21:18] <Gerritjan> Thanks for the help
[21:18] <age> :P
[21:18] <h-dee> GeekSquid: Seems like heck of a work. By the way, I was wondering if I somehow check for ubuntu installation on another system to check for file/directory owners of contents in /var/, and change accordingly...would it work?
[21:18] <h-dee> GeekSquid: Any idea about that?
[21:18] <guntbert> !ask | otterpat
[21:19] <dsnyders> geirha, what's the -d ' ' for?
[21:19] <milamber> Gerritjan: np. just take your time with it, there is a pretty steep learning curve with using the linux dev tools. the gtk-app-devel-list is a really good one to join and there are many people in #programming that are willing to help
[21:19] <GeekSquid> h-dee: that would take longer than reinstalling in my opinion as there are alot of things in /var that have alot of different, user and group permissions
[21:20] <Gerritjan> Ok
[21:20] <cntb> hi installed freenx in lucid want to contol same open session to help user .my old man. not new other session . what ways to accomplish remote assistance
[21:20] <milamber> Gerritjan: also if you are going to be using gtk you are going to want to google for: glade interface designer
[21:20] <h-dee> GeekSquid: I see. Anyways, thanks for your help. I appreciate it. If nothing works out, I'm gonna do that only. Have Fun. Happy New year. :-)
[21:20] <Gerritjan> I'm not familair with Linux, can I install it with packet manager?
[21:20] <shcherbak> GeekSquid: h-dee: ls-lR /var > prototype and write script to set it back
[21:20] <Gerritjan> (glade)
[21:21] <KM0201> Gerritjan: install what w/ package manager?
[21:21] <h-dee> shcherbak: How exactly? I'm a newbie
[21:21] <milamber> Gerritjan: yes, there is a version in the repos
[21:21] <dsnyders> geirha, I just saw the line in the man page where it says it separates lines with tabs by default.  Thanks and Happy New Year!
[21:22] <yorf> Hi, after a delay I get "Error splicing file: Input/output error" during a transfer
[21:22] <milamber> !info glade | Gerritjan
[21:22] <KM0201> hmm
[21:22] <Weedy> cntb: something like x11vnc
[21:22] <Gerritjan> Thanks
[21:22] <otterpat> the wlain on my dell inspiron 1545 is not working it is on and showing networks but i can not get on whthout being puled in to the router
[21:22] <shcherbak> h-dee: what is question... you do not know bash?
[21:22] <milamber> Gerritjan: np
[21:22] <cntb> weedy will control same open session and not open new one?
[21:23] <magicianlord> is it worthwhilte to set noatime on /boot ext in fstab?
[21:23] <h-dee> I know bash a little. What you want me to do exactly? I didn't understand that. I actually changed owner for /var recursively with all sub-directories. And ICEAuthority error starts to show up on reboot.
[21:23] <Weedy> cntb: ... that is what you asked for
[21:24] <Kondry> Sup everyone?
[21:24] <shcherbak> h-dee: what command have you used?#
[21:24] <cntb> good
[21:24] <dsnyders> Kondry, bulk renaming session
[21:24] <Kondry> Ah.
[21:24] <leetdood> my friend has ubuntu 10.10 and he b0rked his his x by lowering his resolution, it blacked out and didn't restore itself. how can he fix it?
[21:24] <h-dee> shcherbak: sudo chown -hR <username> /var
[21:24] <GeekSquid> leetdood: boot to recovery mode and run xfix
[21:25] <yorf> Hi, I get "Input/output error" after trying to transfer
[21:25] <Kondry> I was actually wondering if anyone would be able to help, does anyone know of VPNs for Ubuntu, as for Windows there is stuff like "CyberGhost", anyone know anything like that for Ubuntu?
[21:25] <shcherbak> h-dee: do you know how diff works?
[21:25] <GeekSquid> !vpn | Kondry
[21:26] <h-dee> shcherbak: No! Sorry!
[21:26] <h-dee> shcherbak: What's diff?
[21:26] <dsnyders> Kondry, Have a look at http://alternativeto.net/software/cyberghost/?platform=linux
[21:27] <nothingspecial> h-dee: That was silly
[21:27] <otterpat> the wlain on my dell inspiron 1545 is not working it is on and showing networks but i can not get on whthout being puled in to the router
[21:27] <Kondry> Tor looks good, thank you guys :)
[21:27] <shcherbak> h-dee: man diff , will paste you mine "/var" so you can change acordingly, is system still on after change?
[21:27] <h-dee> nothingspecial: I know. But, I was trying something. Wasn't aware of the consequences.
[21:28] <h-dee> shcherbak: Thanks. I'll check man for that. Yes, its working but not upto the mark, and shoes up a couple of error messages on reboot everytime.
[21:28] <saladin1980> ok SOS 911:)  ok now i installed 10.10 and now i had setup empathy and all that fun stuff but well NOW it says locked out and put in the pass that was supposedly setup and it is not:(  how do i reset that so i can reset that password?
[21:28] <ilovefairuz> otterpat: "pulled by the router"? how do you mean?
[21:29] <nothingspecial> chown  on system files is not a good idea, wether it matters or not, especially whole directories. No offence meant
[21:29] <ilovefairuz> !vpn | Kondry
[21:29] <h-dee> nothingspecial: Thanks. Got my lesson after this mistake.
[21:29] <jgedeon_> saladin1980: Reboot into single user mode.
[21:30] <otterpat> plugged in to the router
[21:30] <saladin1980> ok .. ok assume i am total newb jgedeon how do i do that:)?
[21:30] <lithaerien> Hello everyone, I'm having some trouble booting into the Ubuntu 10.10 Live CD with my Macbook Pro 3,1. Is there anyone able to assist me on this?
[21:30] <milamber> h-dee: it's the first of *many* we've all been there. just remember: backups, backups, backups
[21:30] <shcherbak> first paste is ls -l /var -- http://pastie.org/1422014
[21:30] <shcherbak> h-dee: ^^^
[21:30] <h-dee> milamber: Sure milamber! :-)
[21:31] <Kondry> Also, it it possible to hide your hostname while in IRC chats you are not familiar with?
[21:31] <h-dee> shcherbak: Thanks! Let me see
[21:31] <damagednoob> lithaerien, what's problem?
[21:31] <nothingspecial> h-dee: Yep - me too
[21:31] <ilovefairuz> otterpat: what's your laptop make and model?
[21:31] <lithaerien> Kondry: From my understanding you'll need to donate to freenode to hide your host.
[21:31] <ilovefairuz> Kondry: join #freenode, as for a mask
[21:31] <ilovefairuz> Kondry: ask **
[21:31] <otterpat> dell inspiron 1545
[21:32] <jgedeon_> saladin1980: Reboot and just before going to grub hold down the shift key.  If you go to recovery then choose command line you can do a passwd <username> and set the password
[21:32] <ilovefairuz> !who | otterpat
[21:32] <GeekSquid> Kondry: you will need to set a password with nick serv and then go to #freenode and ask that your nick be cloaked as unaffiliated
[21:32] <ilovefairuz> otterpat: what ubuntu version are you running?
[21:32] <guntbert> !register | Kondry
[21:32] <GeekSquid> Kondry: look at the info for my username ... you will see what it does
[21:32] <leetdood> GeekSquid: thanks, that fixed the issue
[21:33] <GeekSquid> leetdood: no problem, glad I could help
[21:33] <otterpat> ilovefairuz 10.10
[21:33] <mdmkolbe> Is there a way to set the sensitivity and acceleration of my mouse separately from my touch pad?  That is to say I want to have on sensitivity for my physical mouse and another for my laptop's integrated touchpad.
[21:33] <lithaerien> damagednoob: On my MBP I have two options to boot the Live CD one says EFI Grub and the other is normal. The normal way will come to a black screen with the letters and numbers 1. 2. Select CD-ROM Boot Type: The EFI Bootup will give me a kernel error after choosing try Ubuntu before installing. The Kernel error hints towards the filesystem not being readable.
[21:34] <magicianlord> is it worthwhilte to set noatime on /boot ext in fstab?
[21:34] <h-dee> shcherbak: This looks same. I think its the subdirectories problem. What I think is...when I chowned /var and subdirectories to my local user, there might be some files with local user permissions, and when I chowned back all to root again, they might have changed to belong to root, which might be a cause
[21:34] <bustedup277> Okay, so I am a TOTAL n00b. I just installed Ubuntu 10.10 on my USB, so I loaded my USB and it say Ubuntu and loaded. Then the window popped up saying Trial Ubuntu or Install It. So I press "Trial" or whatever, but then it just had the loading circle. So I wait, and I wait, and it never stops loading. So then I click the window and it says it's not responding. What is wrong?
[21:34] <milamber> mdmkolbe: System >> Preferences >> Mouse
[21:34] <bustedup277> Someone please answer. ;.;
[21:34] <lithaerien> damagednoob: The Select CD-ROOM Boot Type screen will leave my keyboard unresponsive too.
[21:34] <shcherbak> h-dee: now 1 part ls -lR /var -- http://pastie.org/1422021 till debconf (included)
[21:34] <delinquentme> OK! soo making progress .. I just realized that the IP address i get from www.whatsmyip.com is the same for BOTH computers im trying to SSH between lol .. this wont get me what i want ..  so how do i ssh to a particular computer WITHIN a network .. from outside that network?
[21:34] <ilovefairuz> otterpat: go to system > administration > additional hardware drivers, .. do you see an entry for your wireless card?
[21:34] <mongy> bustedup277, what did you use to make it
[21:34] <bustedup277> Umm...
[21:34] <mdmkolbe> milamber: AFAICT, that sets the same sensitivity for both mice.
[21:35] <bustedup277> I download the .iso file then I used Universal Installer and installed it on my USB stick.
[21:35] <Slyboots> No-one has *no-idea* how gto get XRender working in VNC?
[21:35] <ilovefairuz> bustedup277: how did you install it to the usd?
[21:35] <h-dee> shcherbak: Thanks...a long list. Let me compare!
[21:35] <shcherbak> h-dee: tell me what you want part 2...
[21:35] <ilovefairuz> bustedup277: usb **
[21:35] <GeekSquid> delinquentme: ifconfig will tell you what your ip is locally , the ip at whatismyip.com is the IP of your House, not the local computer
[21:35] <hellhound> i am having trouble getting ubuntu 10.10 to recognize my second monitor with nvidia-settings
[21:35]  * BernardV wishes everybody a happy new year
[21:35] <damagednoob> lithaerien, are you using an actual cd or is it usb? if it is a cd, could it be scratched?
[21:35] <KM0201> hellhound: whats wrong?
[21:36] <ilovefairuz> delinquentme: configure port forwarding on the router
[21:36] <otterpat> ilovefairuz: broadcom B43
[21:36] <GeekSquid> delinquentme: you will need to set a DMZ or nat route from within your router to allow access to a machine from outside the network
[21:36] <h-dee> shcherback: Yes, please part 2
[21:36] <ilovefairuz> otterpat: to enable/activate it
[21:36] <bustedup277> I simply used the universal installer to install Ubuntu Netbook Remix 2010, selected the file, which WAS correct, then I selected my E:/ drive as the output file, my USB stick. It works all the way until it freezes up when I click one of the options. Meaning that I see the Ubuntu logo loading and all.
[21:36] <h-dee> shcherback: especially /var/lib
[21:36] <hellhound> KM0201:  it only shows one screen and will not recognize the second one.. i have the nvidia driver installed
[21:36] <lithaerien> damagednoob: I had burned two CDs both with the same issue.
[21:37] <otterpat> ilovefairuz: it's activated
[21:37] <KM0201> hellhound: hmm.. never encountered that one...
[21:37] <delinquentme> thanks guys
[21:37] <damagednoob> lithaerien, do you have another pc to try them out on?
[21:37] <shcherbak> h-dee: ok /var/lib
[21:37] <otterpat> ilovefairuz: broadcom STA is not
[21:37] <ilovefairuz> otterpat: ok try STA
[21:37] <ilovefairuz> otterpat: and reboot
[21:37] <milamber> mdmkolbe: there is no easy way to do what you want. but it has been requested. https://wiki.ubuntu.com/X/Config/Input is a good place to get started
[21:38] <lithaerien> damagednoob: I have this one that I'm talking with right now. A PC
[21:38] <bustedup277> Anyone have an answer? >_>
[21:38] <h-dee> shcherback: I found few culprits from part-1 you sent, hopefully changing those back to default might help. Thank you for your efforts. :-)
[21:38] <dsnyders> what chmod do I need to be able to rename files, x or w?
[21:38] <damagednoob> do the cds work on that one?
[21:38] <otterpat> ilovefairuz: i can not it will not let me
[21:38] <cntb> perfecto
[21:39] <ilovefairuz> otterpat: any specific errors?
[21:39] <otterpat> ilovefairuz: SystemError: installArchives() failed
[21:39]  * bustedup277 sighs.
[21:39] <damagednoob> dsnyders, i think you need w
[21:39] <Slyboots> Okay.. Hmm.. differnet approach
[21:39] <ilovefairuz> otterpat: are you connected using cable? if not, connect
[21:39] <Slyboots> If I use XForwarding to host the X11 enviroment on a remote PC
[21:39] <milamber> !chmod | dsnyders
[21:39] <lithaerien> damagednoob: Which I have tried a few days ago and it booted
[21:39] <Slyboots> Is there a way to have it to continue to run after the "host" has shutdown?
[21:39] <bustedup277> ilovefairuz; I answered your question, have any idea what's wrong.
[21:39] <Slyboots> So I can come back and connect to it later
[21:39] <GeekSquid> dsnyders: use sudo mv oldfilename newfilename to do it with out changing permissions
[21:39] <bustedup277> *?
[21:40] <nothingspecial> dsnyders: chmod does not rename files
[21:40] <ilovefairuz> dsnyders: x and w on the directory not the file itself
[21:40] <otterpat> ilovefairuz: yes i am it is the only way i can
[21:40] <mongy> otterpat, seen that before... sadly.  sudo apt-get install --reinstall bcmwl-kernel-source  (with cable connected)
[21:40] <ilovefairuz> bustedup277: try unetbootin
[21:40] <bustedup277> unetbootin = ?
[21:40] <damagednoob> bustedup277, http://unetbootin.sourceforge.net/
[21:40] <ilovefairuz> bustedup277: sudo apt-get install unetbootin .. and then run it
[21:40] <dsnyders> nothingspecial, chmod may not rename files, but it certainly can prevent them from being renamed
[21:41] <milamber> !screen | Slyboots
[21:41] <GeekSquid> !unetbootin | bustedup277
[21:41] <mongy> otterpat, selecting download updates during install actually installs the driver so, before you go onto partitioning etc, you can connect via wifi, and its there after you install..
[21:41] <damagednoob> lithaerien, sorry i'm out of ideas then
[21:41] <mongy> otterpat, just a btw
[21:41] <lithaerien> Thanks then
[21:41] <otterpat> mongy Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
[21:42] <GeekSquid> otterpat: is synaptic running?
[21:42] <ilovefairuz> otterpat:  sudo apt-get update && sudo apt-get install bcmwl-kernel-source
[21:42] <ilovefairuz> otterpat: if a package manager is running, close it, if an update is in progress, leave it till it finishes
[21:43] <nothingspecial> dsnyders: yes, but what do you want to do? perhaps <rename>
[21:43] <bleah6> hey , trying to install ubuntu from usb stick but i get something like "no init found"
[21:43] <bleah6> how do i fix that ?
[21:44] <mcc> Hello... I am having some trouble with PHP on ubuntu. It may be an apache configuration issue. When I try to run a php script, it waits a long time and then says "timeout waiting for output from cgi script". I think it doesn't know how to execute it.
[21:44] <mcc> I have php5-cgi installed but not libapache2-mod-php5. When I apt-get install -s libapache2-mod-php5, it says it is oging to attempt to uninstall my mpm-worker and replace it with mpm-prefork, which is not what i want.
[21:45] <otterpat> mongy ok reboot?
[21:45] <mongy> otterpat, no need to..
[21:45] <ilovefairuz> bleah6: do you get that while trying to install or after installation finished?
[21:46] <dsnyders> nothingspecial, I'm simply getting a permission denied when trying to rename a file.  I wasn't sure if I needed to change x or w.
[21:46] <bleah6> before ...
[21:46] <ilovefairuz> dsnyders: chmod u+w .
[21:46] <ilovefairuz> bleah6: try redoing the usb disk, use unetbootin
[21:46] <foolhardy> I'm in the cli and I'm looking at xorg.conf. I need to change the video driver to "NVIDIA accelerated graphics driver (version 173)" because X will not start as it is with my old geforce fx5500 card. I see the "device" section in xorg.conf. Right now the driver is "nvidia". Is this what I need to change?
[21:47] <bleah6> thats what i used ilovefairuz
[21:47] <mcc> Basically what is the difference between the php5-cgi and libapache2-mod-php5 ubuntu packages, and how does one configure the php5-cgi package?
[21:47] <bleah6> it says no init found and ash shell opens
[21:47] <otterpat> mongy additional drivers is grayed out
[21:47] <bleah6> anything i can do from there ?
[21:47] <nothingspecial> dsnyders: which file, where, are you sure?
[21:48] <ilovefairuz> bleah6: looks the files were corrupt, format it and do it again
[21:48] <mongy> otterpat, reboot or login/out if you think you need to.   lsmod | grep wl
[21:48] <bustedup277> ilovefairuz; It has finished installing, I will try it this time and see if it works.
[21:48] <bustedup277> brb
[21:48] <mongy> logout/in i mean lol
[21:48] <d9500> foolhardy: assuming that you have the nividia binary driver installed, that should be the correct entry
[21:48] <otterpat> mongy ok
[21:49] <KM0201> foolhardy: i run a 6800, and my "device" is set to "nvidia" just like yours
[21:49] <ilovefairuz> mcc: mod-php5 is an apache module that adds PHP support, php5-cgi is a "CGI binary" that could be used with any server supporting CGI (apache and others)
[21:49] <foolhardy> hmmm. Right now X won't start and even in the cli the screen keeps blacking out every 10 seconds
[21:49] <ilovefairuz> mcc: check /etc/php5
[21:50] <mcc> ilove: ok, cool. and i found this which is helping: http://www.bobulous.org.uk/coding/apache-php-cgi.html however now I am having a different problem
[21:50] <d9500> foolhardy: it may be that the nvidia driver isn't properly installed or the kernel module isn't loaded. what does lsmod | grep nvidia return?
[21:50] <foolhardy> it is strange because I can do a regular ubuntu desktop install and everything works correctly, and it uses "NVIDIA accelerated graphics driver (version 173)" driver. But with a minimal no-gui install X won't start
[21:50] <mcc> This and one other guide i saw said to add AddHandler and Action lines to my httpd conf. I did so, however, then I got the error: "Invalid command 'Action', perhaps misspelled or defined by a module not included in the server configuration"
[21:51] <foolhardy> i just did lsmod, but I'm not sure what I'm looking for
[21:51] <mcc> I did this inside of a <VirtualHost> directive. any idea what I might have done wrong there?
[21:51] <dsnyders> nothingspecial, the file is in my ~/Downloads and has -rw-r--r-- permissions.  I could easily do a chmod 777 and be done with it, but I was in a "do things properly" kind of mood today.
[21:51] <nothingspecial> dsnyders: I always found this useful http://linuxcommand.org/lts0070.php
[21:51] <ilovefairuz> mcc: what are you trying to accomplish? you don't need to configure PHP manually to make it work with apache, the packages do this by default
[21:51] <GeekSquid> foolhardy: the minimal does not have a GUI , sudo apt-get install ubuntu-desktop to install the GUI
[21:52] <foolhardy> GeekSquid, I do not want the gui. I only need minimal install for xbmc to run
[21:52] <ilovefairuz> mcc: and use mod-php5 if you're using apache
[21:52] <foolhardy> I'm using "xbmclive"
[21:52] <mcc> ilovefairuz: i need it to work. if the packages are supposed to make it work by default then something went wrong.
[21:52] <ilovefairuz> !lamp | mcc
[21:52] <mcc> when i try to open a PHP script it downloads instead of running. the reason i cannot use the php5 module is that if i try that, it will uninstall mpm-worker and replace it with mpm-prefork
[21:52] <d9500> foolhardy: lsmod shows loaded kernel modules; using | grep nvidia will pipe the listing of modules through grep to find words matching nvidia. if lsmod | grep nvidia tuturns anything, then the nvidia kernel module is loaded. however, like GeekSquid said, if you have no gui (no Xorg) then X will not load.
[21:53] <mcc> and i have a need to use mpm-worker due to limited system resources
[21:53] <foolhardy> d9500, it did not return anything
[21:53] <d9500> *returns
[21:53] <ilovefairuz> mcc: and how does that impair your application ?
[21:53] <foolhardy> just cursor blinking
[21:53] <nothingspecial> dsnyders: In your own /home do what you like ;) That is properly.
[21:53] <foolhardy> not evenr eturned to prompt
[21:53] <d9500> foolhardy: then the kernel module is not loaded.
[21:53] <GeekSquid> foolhardy: there is a #xbmc channel, for help with xbmc
[21:53] <mcc> it's a little bit complicated-- i have a limited amount of RAM (this is a xen instance) and there is a particular script running on this machine which is hit very heavily
[21:53] <mcc> i mean, this is why i need mpm-worker
[21:54] <jgedeon_> user@host:/# sudo a2enmod php5
[21:54] <jgedeon_> user@host:/# /etc/init.d/apache2 force-reload
[21:54] <d9500> foolhardy: how did you install the driver if you have no gui? sudo apt-get install nvidia-glx-VERSION?
[21:54] <mcc> because i need to be able to limit the live number of processes
[21:54] <jgedeon_> foolhardy: yes
[21:54] <foolhardy> current drivers are installed automatically with xbmc live but I require legacy
[21:54] <ilovefairuz> mcc: if you're trying to conserve memory, then apache is certainly not for you, use lighttpd for an easy-to-configure lightweight web server that supports PHP too
[21:55] <GeekSquid> foolhardy: no gui means that you wouldn't need the nvidia driver, as the cli displays fine on nvidia cards and doesn't need graphical support
[21:55] <mcc> To recap: I am trying to use the php5-cgi package instead of the one that installs a module, but am having trouble clarifying to apache that it needs to use the php5-cgi app. ... actually wait i guess i could do that with a hash-bang. one minute
[21:55] <foolhardy> i can get assistance in xbmc-linux channel I just thought this was an ubuntu issue, since xbmc won't even load
[21:56] <mcc> ilovefairuz: this sounds like an extremely attractive option, however, i'm a little short on time this afternoon and that sounds like it would take awhile to get running
[21:56]  * mcc tries addhandler cgi and modifying his scripts to use a hashbang
[21:56] <ilovefairuz> mcc: not at all, you would only have to install a couple of packages and uncomment some lines in the config
[21:56] <foolhardy> but I am getting "(EE) No drivers available" when startx
[21:57] <ilovefairuz> mcc: you would be surprised
[21:57] <d9500> foolhardy: unless xbmc can somehow run straight against a console framebuffer, then you'd need a gui (that is, X server and its associated software) to run it at all. I don't follow xbmc development, but i'm guessing it still requires X.
[21:57] <mcc> ilovefairuz: well, the problem is I have some somewhat elaborate apache configuration as it stands involving multiple virtual hosts, mod_perl etc. So I'd have to recreate all that in lighty.
[21:57] <foolhardy> d9500, it does use x
[21:57] <foolhardy> but x won't start
[21:57] <lwizardl> hi
[21:58] <ilovefairuz> mcc: i see
[21:58] <foolhardy> therein is my conundrum
[21:58] <meco> Flash crashes in Firefox whenever I attempt to enter fullscreen mode, either in Facebook games or on YouTube. I read somewhere that I should swithc off hardware acceleration for the Flashplayer but I cannot find any menu where this is an option. Any suggestions?
[21:58] <mcc> it is probable i am trying to do too much with this box at once.
[21:58] <d9500> foolhardy: i thought you did a minimal (no gui) install? did you install X after that manually, then?
[21:58] <lwizardl> where do you find the settings to enable headphones in 10.10 desktop? when i plug in my headphones nothing works besides the internal laptop speakers
[21:58] <foolhardy> (EE) Failed to load module"nvidia"
[21:58] <hellnest> meco: install non-free flash plugin :)
[21:58] <dsnyders> nothingspecial, I just didn't know whether x or w controlled renaming a file.  Turns out the x on the renaming script file was missing.
[21:59] <nothingspecial> dsnyders: just +x will let ou exceute it
[21:59] <foolhardy> I used xbmc live to install. it installs x, just with no desktop environment
[21:59] <otterpat> mongy did not work
[21:59] <foolhardy> normally boots straight into xbmc, but since x won't start, it doesn't
[21:59] <meco> hellnest: Is that compatible with Flash 10.1?
[21:59] <mongy> otterpat, network manager not picked up any stations?
[21:59] <ilovefairuz> meco: perhaps you mean compositing? system > preferences > desktop effects
[21:59] <mongy> lsmod | grep wl    what does that bring back.
[22:00] <ilovefairuz> hellnest: meco: the non-free flash plugin *is* the same one from adobe
[22:00] <mcc> "This PHP CGI binary was compiled with force-cgi-redirect enabled.  This means that a page will only be served up if the REDIRECT_STATUS CGI variable is set, e.g. via an Apache Action directive"
[22:00] <mcc> ...bother
[22:00] <d9500> foolhardy: then that's not a minimal command-line install. you had GeekSquid and I trying to diagnose the wrong problem--no big deal, now that we can tell better what the problem is, but when you said minimal install, i thought you meant no X.
[22:00] <nothingspecial> dsnyders: if you own the file, of course
[22:01] <foolhardy> I see. My mistake.
[22:01] <mcc> oh, i need to a2enmod actions.
[22:01] <hellnest> ilovefairuz: lol, i'm noob just try to help :) dunno the diff. Also he asking about the hw accleration. The setting is inside firefox. If you point him to desktop-effects, it's mean compiz setting not hw accleration :)
[22:01] <cholten99> Hi. I'm having a problem where running some apps (VLC, aMSN, Calibre, etc) cause my box to reset (I'm runing 10.10). I thought it might be a rogue config problem so I've just finished a complete clean re-install and have the same thing :-(. Is there an easy way to look at some crash-logs to find out which shared library (which I'm guessing is the cause) is to blame? Thanks.
[22:01] <meco> ilovefairuz: I cannot find 'desktop effects' here on hardy
[22:01] <foolhardy> What should I have said - since it installs x but there is no desktop environment like ubuntu desktop
[22:01] <ilovefairuz> hellnest: and i pointed that out
[22:01] <magicianlord> cholten99: log viewer, or in /etc/log
[22:01] <foolhardy> just not "desktop"?
[22:02] <hellnest> ilovefairuz: you're the expert :)
[22:02] <foolhardy> well, irrelevant I guess. So yea, x won't start and I'm getting "no drivers available"
[22:02] <d9500> foolhardy: if xbmcliv installs only the current nvidia (260.19.29 i think) drivers by default and you need the legacy 173 drivers, then it should be as simple as apt-get purging the newer drivers, rebooting, and apt-get instaling the legacy 173 drivers, running nvidia-xconfig as root to make a new xorg.conf, and then starting X.
[22:02] <epaphus> Hello. I have installed openswan... how do I know of my generic kernel already has ipsec support compiled in ?
[22:02] <Maahes> magicianlord: /var/log not /etc/log
[22:02] <magicianlord> Maahes: thank you
[22:02] <foolhardy> d9500, forgive me, but how do I purge the current drivers? sudo apt-get purge nvidia?
[22:03] <meco> I cannot find system > preferences > desktop effects here on hardy. Where should I look?
[22:03] <magicianlord> foolhardy: from synaptic package manager, find nvidia driver currently installed and then right click and purge
[22:03] <otterpat> mongy well let me rephrase my problem yes it connects but it disconnects
[22:03] <foolhardy> magicianlord, how do you access spm from cli?
[22:03] <Maahes> meco: I don't think hardy has that menu
[22:04] <jgedeon_> epaphus: your kernel should if you have not rebuilt a customer kernel.  It should be on by default.
[22:04] <cholten99> Okay, thanks. I now have Log Viewer up. Hints for which log and what I should be filtering for to hunt for reset causes?
[22:04] <ilovefairuz> meco: first try: alt + f2, metacity --replace   ... does this help with the flash problems?
[22:04] <Maahes> you need to install compiz-gnome or compiz-config-settings-manager (ccsm)
[22:04] <mongy> otterpat, ah well,  was there the b43 driver available.. bu I use STA fine..
[22:04] <magicianlord> i use sta, becaue its the only one that works
[22:04] <ActionParsnip> Maahes: it's compizconfig-settings-manager
[22:04] <epaphus> jgedeon_ hmm.. do you have a source i can show my friend who is breaking his head blaiming the kernel? iam running lucid from a minimal install
[22:05] <mongy> magicianlord, +1
[22:05] <Maahes> ActionParsnip: danke.
[22:05] <ActionParsnip> Maahes: np broseph :)
[22:05] <meco> ilovefairuz: No, that made no difference
[22:05] <otterpat> the STA did not work at all
[22:05] <d9500> foolhardy: i don't know the exact syntax for that since i'm not running the current ubuntu. i'm guessing you would run apt-cache search nvidia to find all available nvidia drivers in the repos, run dpkg -get-selections | grep nvidia to see currently installed nvidia drivers, and then, if the current driver is the most recent (256 or 260 insteaad of 173) purge that package name.
[22:06] <epaphus> jgedeon_ iam running 2.6.32-27-generic i386
[22:06] <otterpat> mongy the STA did not work at all
[22:06] <ilovefairuz> meco: you're using a rather old ubuntu release, i suggest you install a newer version, Lucid 10.04 is an LTS release too
[22:07] <GeekSquid> d9500: foolhardy: xbmc-live is not a ubuntu distro, and unfortunately is not supported here, I suggest you look elsewhere for help, you can install a regular ubuntu and install xbmc after you get the nvidia drivers working, seems like you would have better luck than using the xbmc-live, and better support with the true ubuntu base
[22:07] <meco> ilovefairuz: Yeah.. I know...
[22:07] <magicianlord> what is xmbc
[22:07] <r00t4rd3d> xbmc ?
[22:07] <magicianlord> foolhardy: you can try purging nvidia-current
[22:07] <jgedeon_> epaphus: Are you running a hardy box?
[22:08] <GeekSquid> magicianlord: xbmc is a media center pc, that runs under a number of linux distros
[22:08] <magicianlord> yes?
[22:08] <itaylor57> looking for distros with dead in the name should return good options
[22:08] <dansan> Ok, so I don't understand the underlying security model that's dictating chroot's behavior.  I can't create a chroot jail and run it as either root or anybody else (on Ubuntu).  I don't want to use schroot, I want to do it the manual way 1st because I want to understand it.  I get "Operation not permitted"
[22:08] <rww> foolhardy: I already told you yesterday that XMBC-Live isn't supported here because it's an unofficial derivative, and to seek support from the XBMC people. Please consider listening to that.
[22:09] <dansan> do I need to screw with pam? /etc/security/limits.conf?
[22:09] <mongy> otterpat, odd.  which broadcom is it
[22:09] <mongy> otterpat, lspci -v | grep Broadcom
[22:09] <dansan> I copied bash & it's dependencies into the jail, added proc & dev, no dice
[22:09] <sparrowminer> ciao
[22:10] <GeekSquid> !it | sparrowminer
[22:10] <sparrowminer>  /join #ubuntu-it
[22:10] <sparrowminer> ciao
[22:10] <ilovefairuz> sparrowminer: no space before /
[22:10] <bluezonemobile> Lol
[22:10] <dansan> :)
[22:11] <dansan> I've done that before too
[22:11] <mcc> Problem solved. Thanks all for the help
[22:11] <knoppies> I have a built in GSM modem on my laptop, and I was wondering if anybody knew of an app that I could send/receive SMS/text msgs with?
[22:11] <sparrowminer> good night
[22:11] <foolhardy> rww, I wasn't aware of that
[22:11] <sparrowminer> good night
[22:11] <otterpat> mongy the one that is not working is the STA and the one that is is the B43
[22:11] <foolhardy> telling someone that you already told them something doesn't help, especially when they weren't aware of it
[22:11] <GeekSquid> knoppies: gsm-utils includes what you need
[22:11] <knoppies> thanks GeekSquid
[22:12] <mongy> otterpat, its the opposite for me.  well as long as its working.
[22:12] <rww> foolhardy: When someone says something to you in a channel that you're in and don't subsequently leave for 2 hours, the expectation is that you read that message. Either way, now you know.
[22:12] <oneliner> anyone knows jack about jack?
[22:12] <dansan> very little oneliner
[22:12] <ActionParsnip> oneliner: nothing
[22:13] <dansan> oneliner: but try me
[22:13] <GeekSquid> oneliner: /join #jack
[22:13] <oneliner> am fiddling in double depth; new in ubuntu and new at handling midi
[22:13] <ilovefairuz> !details | oneliner : and watch your language
[22:14] <oneliner> ilovefairuz: just an innocent pun, but anyways
[22:14] <dansan> :)
[22:14] <otterpat> mongy well working is a relative term still disconnecting
[22:14] <dansan> oneliner: and I have no clue what double depth is :)
[22:14] <rww> 37240001705556
[22:14] <rww> m/t
[22:15] <oneliner> that an exaggeration of "over my head" :)
[22:15] <GeekSquid> rww: speaking in code again?
[22:15] <dansan> oneliner: ahhh, well I use jack with ardour, but try #jack or #ardour
[22:15] <nothingspecial> dansan: If you try copying bash and chrooting, remember to preserve the directory structure - after all bash looks for ls in /bin (or /usr/bin) ** whereever it is**, if you see what I mean.
[22:16] <rww> GeekSquid: I'm not good at multitasking, it seems :(
[22:16] <delinquentme> does anyone know what kind of software a default IP of http://10.1.10.91 would be for?
[22:16] <delinquentme> if thats my default gateway
[22:16] <oneliner> i am trying to get to grasp with the basic concept of the midi server and trying to get rosegarden to reproduce the midi examples (it appears to be running alright but i get no sound)
[22:16] <dansan> nothingspecial: thanks for the response.  I believe I've copied the directory structure correctly.  I've actually also copied firefox & it's dependencies as well.  Maybe I should be a pastebin of the contents
[22:17] <ilovefairuz> delinquentme: try nmap's os/version probing?
[22:17] <ilovefairuz> and google too.
[22:17] <GeekSquid> delinquentme: not software, just network, not a standard IP, but some routers don't stick to the mainstream, not a problem though
[22:18] <ilovefairuz> dansan: perhaps what you're looking for is an apparmor profile for firefox ?
[22:18] <nothingspecial> dansan: I`m theorising, I`m not sure if I could actually help :)
[22:18] <sparrowminer> ciao
[22:18] <delinquentme> GeekSquid, ilovefairuz so the issue is its coming up with just a screen thats says "It works! "
[22:18] <GeekSquid> sparrowminer: ciao bella, can we help you with something?
[22:19] <dansan> and I lied, sorry.  What it actually says is "cannot find file /bin/bash", I get the "Operation not permitted" when trying to run as non-root, but of course, I want non-root to run in the end
[22:19] <GeekSquid> delinquentme: looks like an apache webserver
[22:19] <dansan> http://pastebin.ca/2036113
[22:19] <delinquentme> GeekSquid, can that be installed on a wireless router?
[22:20] <dansan> Here's my chroot contents.  I have it in /var/chroot/firefox and I'm running "chroot /var/chroot/firefox /bin/bash"
[22:20] <ilovefairuz> delinquentme: that's the default apache welcome page
[22:20] <otterpat> mongy i wonder  if it is my wireless card itself i just created a wireless network and it has no signal strength but is is conned
[22:20] <PhilT> delinquentme: routers run web servers for GUI, not usually apache though
[22:20] <GeekSquid> delinquentme: in theory, yes, I don't know why it would be, but if you have port forwarding enabled, you would be looking at the webserver of your local machine
[22:20] <dansan> chroot: cannot run command `/bin/bash': No such file or directory
[22:21] <GeekSquid> delinquentme: try http://localhost .... see if you get the same result
[22:21] <goetter> for sharing between two ubuntu machines, which of nfs and samba is less cpu intensive/more efficient?
[22:21] <mongy> otterpat, for me b43 worked flaky, and signal was always very low, rate was fluctuating from 1mb/s to 54mbp/s all the time
[22:21] <delinquentme> GeekSquid, yeap sure do!
[22:21] <ilovefairuz> goetter: ssh does just fine, places > connect to
[22:22] <goetter> sorry, console only i meant
[22:22] <knoppies> goetter, I use the connect to menu and ssh (ts actually sftp or something I think)
[22:22] <goetter> i'll be using this to share media for xbmc
[22:22] <goetter> and other things
[22:22] <ilovefairuz> goetter: sudo apt-get install sshfs
[22:22] <ccvp> wow, this freaking owns
[22:22] <ccvp> ps3mediaserver succesfully installed on 10.10
[22:22] <Sadin_> i start my ubuntu 10.04 system and it works fine then after a few minutes my screen goes black and flashes some white stripes and does not go back to unutu and i cannont do anything what does this mean
[22:22] <ccvp> now transcoding raw .ts(blue ray files)
[22:22] <GeekSquid> delinquentme: guessing 10.1.10.91 is your local machine and your gateway is actually 10.1.10.1
[22:22] <ccvp> over the wireless N lan, to all devices on my lan
[22:22] <ccvp> , ie: xbox360/ipad/iphone....win
[22:22] <goetter> okay sshfs looks simple enough
[22:23] <delinquentme> GeekSquid, own.
[22:23] <goetter> but one of my clients is an appletv, which doesn't have an amazing cpu
[22:23] <knoppies> goetter, once you have the drive mounted, I think xbmc can use it. I haven't tested that yet. Im not sure then, I haven't done much successful fiddling with samba
[22:23] <delinquentme> GeekSquid, how are people supposed to know these things haha?
[22:23] <goetter> i'd like to give it the implementation that eats the least cpu
[22:23] <goetter> so that it has more to play videos with :3
[22:23] <bastidrazor> ccvp: i just setup ushare to stream media to the xbox and ps3
[22:23] <GeekSquid> delinquentme: 20 years at the game and I still don't know everything
[22:23] <ilovefairuz> goetter: lighttpd?
[22:24] <ccvp> bastidrazor
[22:24] <ccvp> i couldnt get ushare setup
[22:24] <dansan> ilovefairuz: Interesting.  I'm not running SELinux, and although I can re-compile the kernel any way I like, I'm thinking that running a version of firefox in a chroot that has the stupid plugins and having a separate "clean" version (no goofy plug-ins) would be a safe approach
[22:24] <ccvp> it wouldnt see any of my ubuntu shares
[22:24] <ccvp> for whatever reason when i browsed in my 360
[22:24] <ccvp> im running ps3media server on a Q9300/6gigddr3/ubuntu 10.10
[22:24] <ccvp> its pretty quick
[22:24] <GeekSquid> !enter | ccvp
[22:25] <dansan> ilovefairuz: I've seen some HOWTOs that say how to do it with schroot, but I want to make it work manually 1st (at least a bash prompt) to make sure I understand the tech & implications before I proceed with any higher level software
[22:25] <bastidrazor> ccvp: you tell it which folders to share in /etc/ushare.conf
[22:25] <ilovefairuz> dansan: apparmor is NOT SELinux, is a similar but separately developed technology
[22:25] <ccvp> have you checked out ps3mediaserver
[22:25] <dansan> ilovefairuz: ahh
[22:25] <ccvp> for ubuntu?
[22:25] <ccvp> seamless transcoding...any fileformat/extension
[22:25] <bastidrazor> ccvp: no, ushare was the first i tried and it works fine.
[22:25] <Gartral> GeekSquid, so what do you make of the chromebook's lscpu output?
[22:26] <ccvp> well i may msg u if i get issues with ps3mediaserver
[22:26] <ccvp> can ushare transcode any file as well?
[22:26] <ccvp> when browsing through the 360?
[22:26] <ilovefairuz> dansan: and it's way much easier to configure than SELinux
[22:26] <bastidrazor> ccvp: i can not get mp4's to play on either ps3 or 360.. the only issue i have.
[22:26] <ccvp> mp4 = mkv?
[22:26] <ccvp> , ie: h264 avi's?
[22:27] <dansan> ilovefairuz: thanks, I'll read up on it.  But I still want it jailed & separated from the rest of the filesystem.
[22:27] <GeekSquid> Gartral: nothing special "GenuineIntel"
[22:27] <ilovefairuz> dansan: it does that and much more
[22:27] <dansan> ilovefairuz: it's adobe flash that's the huge leak
[22:27] <nothingspecial> GeekSquid: ?
[22:27] <ilovefairuz> dansan: i enable it only on youtube
[22:28] <dansan> ilovefairuz: Here we are with perhaps the most secure operating system on the planet and we're installing one of the most insecure binaries on it opening it up to the world!
[22:28] <Gartral> look at the core/cpu count
[22:28] <dansan> ilovefairuz: yeah, I just want to go a step further
[22:28] <GeekSquid> nothingspecial: not for you .. notice the space, the answer was in relation to rww's question
[22:28] <Gartral> GeekSquid, ^^^
[22:28] <bastidrazor> ccvp: the extension.. file.mp4  .. at the moment i'm unable to test if changing the extension will work.
[22:28] <nothingspecial> GeekSquid: sorry
[22:28] <dansan> ok, gotta afk, brb
[22:29] <ccvp> ps3 media server was able to stream a 90gig uncompressed blueray .ts file to my ipad via ps3medaiserver running on ubuntu 10.10
[22:29] <ccvp> over wireless N, with NO hiccups
[22:29] <linxeh> nice
[22:29] <ilovefairuz> dansan: http://blogs.adobe.com/penguinswf/2008/08/secrets_of_the_mmscfg_file_1.html
[22:29] <ilovefairuz> dansan: you can disable ALL filesystem read/write operations
[22:29] <GeekSquid> Gartral: I see 2 cores (Intel Core Duo) on 1 socket,
[22:30] <ccvp> Is there a good usenet browser for Ubuntu 10.10, thats as good as newsleecher?
[22:30] <mongy> ccvp, lottanzb
[22:30] <andrewax> if problem is youtube on full screen, just disable hardware acceleration@
[22:30] <ccvp> mongy, usenet provider independant?
[22:30] <ccvp> so it'll work with giganews?
[22:30] <mongy> ccvp, or ninan if you want something a bit harder/special.
[22:30] <mongy> ccvp, yes.
[22:31] <RedSingularity> How can I change the default playback speed in VLC?
[22:31] <knoppies> I have a built in Huawai GSM modem on my laptop product ID: 1404, how do I find a 'marketing name
[22:31] <ccvp> mongy, can i tell it to utilize the 50 connection capability that giganews has?
[22:31] <mongy> ccvp, yes
[22:32] <mongy> ccvp, and ssl and, whatever else
[22:32] <ccvp> on lottanzb.org it has 10.04 as latest, assume that works fine w/ 10.10?
[22:32] <Xintruder> Can we have Ubuntu clients authenticated on a windows environment (authenticate through AD)?
[22:32] <Gartral> GeekSquid, there's the discrepency.. in lscpu it comes up an Atom N455.. not Core Duo
[22:33] <mongy> ccvp, might wanna use the beta 0.6
[22:33] <DasEi> knoppies: install hwinfo, it's output is detailed
[22:33] <knoppies> thanks DasEi I will give it a try.
[22:33] <mongy> ccvp, its moving from hellanzb as backend to sabnzb as backend..  better and has web interface if needed
[22:33] <mongy> ccvp, http://www.lottanzb.org/2010/07/lottanzb-0-6-daily-builds-available/
[22:33] <GeekSquid> Gartral: cat /proc/cpuinfo .... little more detailed info
[22:34] <mongy> ccvp, just remember to add the sabnzb ppa as well from that page, and install it...
[22:34] <mongy> ccvp, other than that, its easy as pie to setup
[22:34] <ccvp> ok, uninstalling the latest stable then
[22:34] <ccvp> didnt see that .6 was there
[22:35] <mongy> ccvp, could just upgrade it :)
[22:35] <mongy> ccvp, ok nvm
[22:35] <ilovefairuz> Xintruder: https://help.ubuntu.com/community/ActiveDirectoryWinbindHowto
[22:35] <DasEi> knoppies: also gnome-device-manager, if you prefer GUI
[22:35] <mongy> ccvp, ive used the 0.6 for a while, works fine.
[22:36] <hihihi100> i installed a dictionary for windows under wine, i cannot access it nor delete it, can i still accessthe contents of the dictionary?
[22:36] <Gartral> GeekSquid, woaw, flags I've never seen befor
[22:36] <GeekSquid> Gartral: lemme see | pastebinit
[22:36] <ccvp> how do i add sabnzb ppa? i have no clue what that means
[22:36] <ericstewart> I just compiled and installed ruby from source. I can't figure out how to make aptitude exclude ruby from installing as a dependency.
[22:37] <Gartral> http://pastebin.com/krpRXUdu
[22:37] <Gartral> GeekSquid, http://pastebin.com/krpRXUdu
[22:37] <knoppies> DasEi, I might have a look at that too, but hwinfo gave me some info so I think I am able to move forward. I need to reboot though. Thanks for the help. I really appreciate it.
[22:37] <okapi> hi all, how can I find duplicate line in a text file?
[22:37] <red2kic> hihihi100: Applications --> Office --> Dictionary.  Something wrong with that?
[22:37] <DasEi> knoppies: nice
[22:37] <mongy> ccvp, just add ppa:lottanzb/daily-build   and  ppa:jcfp/ppa   and update and install lottanzb and sabnzb{tab it}   as I dont know full name
[22:38] <indystorm> yay!!! I got ubuntu server up and running! SWEET!!! :)
[22:38] <hihihi100> thats not my point red, im talking about this particular larousse dict
[22:38] <ccvp> do i paste those two lines in "other software" sources?
[22:38] <ccvp> in update manager?
[22:38] <DasEi> !ppa | ccvp
[22:38] <GeekSquid> Gartral: google's gone apeshizzle!
[22:39] <elliott> Is it possible to write the USB image to a disk partition and boot it with GRUB/whatever?
[22:39] <elliott> Installation CD, that is.
[22:39] <Gartral> GeekSquid, LOL! I don't recognize 70% of those flags
[22:39] <mongy> ccvp,  sudo add-apt-repository whatever
[22:39] <cheater99> hi!
[22:39] <DasEi> ccvp: I haven't followed what you are up to, but seems you need soft not found in standard repo, and decided to use a -slightly riski- foreign one
[22:39] <Gartral> GeekSquid, like... aperfmperf
[22:40] <nowres> Hello!
[22:40] <cheater99> i want to simulate a microphone in ubuntu, how can i do this?
[22:40] <cheater99> i'm sure there's a way
[22:40] <Gartral> cheater99, in cli or gui?
[22:40] <cheater99> i just want to play back an audio file, and have an app that needs a microphone pick that up
[22:40] <cheater99> the app is gui (it's actually under wine, but that's no problem, wine puts the mic through OK, i know it works for everyone)
[22:40] <Gartral> cheater99, look into aplay and sox
[22:40] <cheater99> let me try that
[22:41] <GeekSquid> Gartral: and that is coming from the Chrome kernel, so we have a bunch of undocumented unrecognized and otherwise un-understandable information that will take a while to sort
[22:41] <DasEi> cheater99: mic could create a dummy dev for; audacity does such recordings
[22:41] <itaylor57> Gartral: they arent flags just optiopns
[22:41] <elliott> Nobody's insane enough to do what I want to do, I guess :)
[22:41] <cheater99> DasEi: i didn't understand that, say again?
[22:41] <Gartral> itaylor57, they're actually CPU flags from Chromeos kernel
[22:42] <itaylor57> okie dokelie
[22:42] <nowres> my graphics card runs great on lucid. when i upgraded to maverick it no more works but in the live cd it works. it's an intel i915. before login screen shows the screen flashes many times then stay blank. could it be caused by gdm? any idea?
[22:42] <DasEi> cheater99: audacity records, without need for a dummy-mic" what passes through soundcard. If you need a dummy, could set up one in /dev.
[22:42] <cheater99> Gartral: i don't think sox is what i mean
[22:42] <cheater99> DasEi: how would i set it up?
[22:43] <ccvp> mongy what is ppa:jcfp/ppa
[22:43] <ccvp> ?
[22:43] <trojanking> hello all, i heard its possible to install ubuntu on a USB
[22:43] <mongy> ccvp, for sabnzb
[22:43] <ccvp> i added the first one, and it gave me some hahsh in return
[22:43] <DasEi> cheater99: /dev/mic for example
[22:43] <ccvp> hash
[22:43] <cheater99> DasEi: yes. how?
[22:43] <DasEi> cheater99: sudo touch /dev/mic
[22:44] <trojanking> hello all, i heard its possible to install ubuntu on a USB
[22:44] <GeekSquid> Gartral: same reason I didn't buy the G1 and waited for the MOTO Droid
[22:44] <mongy> ccvp, its the backend.  lottanzb is not the program all on its own, its just a frontend
[22:44] <cheater99> DasEi: and then, how do i put sound in it?
[22:44] <carson> I have an old computer, 60 MB of RAM, single core 551 Mhz proccessor, what should i put on it, Xubuntu, Puppy Linux or DSL?
[22:44] <ccvp> ok i did those two commands for adding them, so now i can just sudo apt-get install lottanzb, and it'll install the .6?
[22:44] <DasEi> cheater99: you can just point to it, as it's a dummy, it won't work
[22:44] <Gartral> GeekSquid, lol, same here.. but i'll never turn down a free laptop, even if it's a bit strange!
[22:44] <GeekSquid> carson: puppy might work, DSL is the best bet
[22:44] <DasEi> !usb | trojanking
[22:44] <mongy> ccvp, sudo apt-get update first
[22:45] <GeekSquid> Gartral: FREE? how did you pull that one off?
[22:45] <Justus> hi, I have switched the complete hardware of a system (I put the hdd into another computer) how can I update all drivers, so ubuntu will soft reinstall? is this possible?
[22:45] <cheater99> DasEi: but i need to put sound into it.
[22:45] <carson> GeekSquid: Could DSL still download somewhat newer software? does it have software center?
[22:45] <DasEi> carson: dsl,or least 128 MB ram
[22:45] <mongy> ccvp, then sudo apt-get install lottanzb sabnzbdplus
[22:45] <elliott> Nobody? :)
[22:45] <DasEi> elliott: ask again ?
[22:45] <Gartral> GeekSquid, they're TESTBED machine from the chromeos PILOT program! you sign up, and if selected, Google Ships you a computer... i'll pm you da link too sign up
[22:46] <elliott> DasEi: Is it possible to write the Live CD or USB image to a disk partition and boot it with GRUB or similar?
[22:46] <GeekSquid> Gartral: I love you!
[22:46] <elliott> I don't have an optical drive or a convenient USB stick.
[22:46] <bustedup277> ilovefairuz: I tried your thing, I could trial Ubuntu, but whenever I tried to install, I selected my language, then pressed forward. Then the next thing came up, I read it, and presssed forward, then it said it was loading. I walked away for about 15 minutes then came back and it still had the loading circle. Is this normal and no? What is wrong?
[22:46] <elliott> Furthermore, is it possible to then install to the same media I booted the Live CD off?
[22:46] <DasEi> elliot: yes, can make grub2 boot an iso
[22:46] <Gartral> GeekSquid, it's not garenteed you'll get one!
[22:46] <elliott> DasEi: no, that requires special support in the initramfs IIRC
[22:46] <GeekSquid> Gartral: I know, but it is worth a try
[22:46] <ccvp> im about to pop in a 2TB WD Caviar Green to a sata port on my pc, will ubuntu be able to utilize
[22:46] <elliott> I'm fine writing an .img to a partition etc.
[22:46] <ccvp> 2TB drive/sata out of the box?
[22:47] <elliott> ccvp: yes.
[22:47] <elliott> ccvp: make sure to turn it off first :-P
[22:47] <nibalizer> is it possible to install ubuntu desktop w/o installing X/gnome?
[22:47] <ccvp> i just tried putting it in just now
[22:47] <elliott> nibalizer: alternate install CD
[22:47] <ccvp> when my pc was in, and i heard a pop/shock sound, electrical
[22:47] <elliott> ccvp: erm not on the machine you are talking on, right?
[22:47] <ccvp> now the pc doesnt work
[22:47] <nibalizer> elliott: i'll check that out
[22:47] <DasEi> elliott: so I didn't get your question
[22:47] <mongy> !minimal | nibalizer
[22:47] <itaylor57> is it possible to install x windows without
[22:47] <elliott> DasEi: but I just said it a few lines up :)
[22:47] <itaylor57> xll
[22:47] <cheater99> elliott: you would need to write the img to the drive, load the kernel, set up a ram fs, simply copy files over, then continue booting from that. no idea about the details.
[22:47] <itaylor57> LOL
[22:47] <elliott> ccvp: um did you just plug a sata drive in to a live pc
[22:48] <ccvp> yep
[22:48] <ccvp> j/k - lulz
[22:48] <elliott> ccvp: i was getting worried there.
[22:48] <elliott> what has humanity come to :)
[22:48] <elliott> cheater99: well. yeah. it's the details that are difficult :P
[22:48] <qtrip> quit
[22:48] <ccvp> my main PC has front loading trays/docks for sata drives
[22:48] <ccvp> gateway FX 6480-15E, it would be nice if sata evolves to hot swappable
[22:49] <DasEi> ccvp: sata is hotplug already
[22:49] <trojanking> please after installing ubuntu on usb can i run it side by side with my mac OS... i mean can i switch to another OS already installed in hard drive without switching off my pc?
[22:49] <ccvp> oh, so u cant do it
[22:49] <ccvp> mobo wise
[22:49] <ccvp> but if it has trays, thats fine?
[22:49] <cheater99> elliott: my guess is try it first with a simple fat32 partition: make a usb stick that creates an empty fat32 partition, copies over to the fat32. you can then check if that works at all. then try to make it boot. then doing ramfs shouldn't be a big step from that.
[22:49] <ccvp> cant do it live to the mobo sata port etc...?
[22:49] <elliott> cheater99: I have no USB stick.
[22:49] <cheater99> elliott: cd then
[22:50] <DasEi> trojanking: no, that you would use a vm for
[22:50] <dansan> ilovefairuz: thank you.  However, mm.cfg is useless if the integrity of the flash binary has been compromised it's self.  I think I would be more comfortable trusting a convicted criminal with my security.
[22:50] <Gartral> trojanking, yea, look into xen computing
[22:50] <elliott> cheater99: I have no optical drive.
[22:50] <elliott> cheater99: Why do you think I want to boot the Live CD from a partition?
[22:50] <ccvp> brb, gotta transfer drive
[22:50] <elliott> OK, there's probably an unused USB stick _somewhere_, but I'd rather do this than dig around to find it ...
[22:50] <cheater99> elliott: why not just boot a linux from the partition?
[22:50] <trojanking> ok thanks
[22:50] <cheater99> elliott: can you take out the hdd?
[22:50] <Gartral> !xen | trojanking
[22:50] <elliott> cheater99: that's what I want to do, I want to boot the ubuntu livecd from the partition
[22:50] <elliott> and no, I can't
[22:50] <elliott> laptop
[22:50] <elliott> not easily accessible HD
[22:50] <cheater99> elliott: you can take out laptop hdds
[22:50] <elliott> i'd really rather not
[22:51] <cheater99> elliott: how are you going to put data on the hdd if you have no optical drive?
[22:51] <cheater99> and no usb stick?
[22:51] <elliott> cheater99: um I am sort of connected to the internet?
[22:51] <Gartral> elliott, does it have usb?
[22:51] <elliott> Gartral: yes. but i don't have a usb drive handy.
[22:51] <cheater99> elliott: what OS do you have?
[22:51] <elliott> hm wait this might work
[22:51]  * elliott goes off to try
[22:51] <Gartral> elliott, ahhah, hmm.. sd card?
[22:51] <elliott> Gartral: I think there's one of those ... somewhere :-D
[22:52] <elliott> I doubt it can boot from it
[22:52] <elliott> anyway, I have an idea
[22:52] <cheater99> elliott: you could resize the partition with the OS that's on it already, then rip the image of a working ubuntu partition from somewhere and put it on your system
[22:52] <Rave1> elliott, http://www.instantfundas.com/2007/08/install-any-linux-distro-directly-from.html
[22:52] <cheater99> elliott: then set it to bootable.
[22:52] <cheater99> elliott: make sure the grub on the donor system was installed on the partition and not in the mbr.
[22:52] <elliott> Rave1: yep that is basically what i was going to try.
[22:52] <elliott> cheater99: I'm just going to copy the LiveCD files
[22:52] <elliott> and then use GRUB to boot kernel/initrd
[22:53] <elliott> the only problem is-
[22:53] <Rave1> elliott,  ok
[22:53] <elliott> how can I force Ubuntu to load all the installation files into RAM?
[22:53] <elliott> Since I need to install it to the _same_ partition.
[22:53] <cheater99> don't
[22:53] <itaylor57> it wont work
[22:53] <elliott> IIRC I've done this before but I forget how.
[22:53] <cheater99> elliott: have two partitions
[22:53] <cheater99> elliott: you can later remove the livecd partition
[22:53] <elliott> I suppose I can do without 600 megs if I have to :)
[22:54] <elliott> I'll get to partitioning.
[22:54] <Gartral> elliott, you reaaly need a lice disk too boot from, you have no external drives what so ever?
[22:54] <cheater99> you can resize partitions using gparted or something like that under linux
[22:54]  * cheater99 forgot the actual command
[22:54] <elliott> Gartral: I probably do, but they're all either used or somewhere I don't know where.
[22:54] <elliott> Besides, this sounds like fun.
[22:54] <elliott> I've done similar things before, I know what I'm doing.
[22:54] <cheater99> elliott: you can use say partition magic under windows to resize your existing partition without losing data.
[22:54] <itaylor57> head it all before
[22:55] <elliott> itaylor57: don't worry, I'm crazy enough.
[22:55] <elliott> cheater99: yeah, i'm fine with resizing.
[22:55] <DasEi> elliott: I still don't get your question.. you want to boot an iso from hd ? with usb as startmedium ?
[22:55] <kmck> So, my preferences>appearance today and i was looking at the themes they had, i clicked on the link to get more themes and went to the first click-able option on the site 'Controls' and downloaded what was called 'evil mac' then i hit the install button on the appearance window and found the file i had downloaded, once i clicked it a message came up and said it was successfully installed however when i was trying to use it a message kept coming up say
[22:55] <elliott> DasEi: I want to boot the Ubuntu Live CD -- through any means, ISO or not -- from HD.
[22:55] <cheater99> DasEi: we've already answered his question
[22:56] <DasEi> fine then , cheater99
[22:56] <itaylor57> DasEi: they know everthing
[22:56] <elliott> itaylor57: are you referring to me?
[22:56] <DasEi> itaylor57: we do:)
[22:56] <itaylor57> not me
[22:57] <itaylor57> Moi?
[22:57] <silent_h> Hey all.  I'm using 10.10 64-bit and my /var/log directory keeps filling up (~7GB) due to kern.log and messages growing too big.  I looked at the logs to see what the problem was, and here's what it has:
[22:57] <silent_h> Jan  1 16:44:15 ubuntu-desktop kernel: [48643.983578] WARNING: at /build/buildd/linux-2.6.35/net/wireless/scan.c:580 cfg80211_inform_bss_frame+0x1e0/0x1f0 [cfg80211]()
[22:57] <silent_h> Jan  1 16:44:15 ubuntu-desktop kernel: [48643.983582] Hardware name:
[22:57] <silent_h> Jan  1 16:44:15 ubuntu-desktop kernel: [48643.983584] Modules linked in: nls_iso8859_1 nls_cp437 vfat fat usb_storage binfmt_misc vboxnetadp vboxnetflt vboxdrv parport_pc ppdev nvidia(P) snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm arc4 snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer rtl8180 snd_seq_device mac80211 eeprom_93cx6 snd soundcore cfg80211 snd_page_alloc psmouse serio_raw intel_agp lp parport usb
[22:57] <silent_h> Jan  1 16:44:15 ubuntu-desktop kernel: [48643.983626] Pid: 0, comm: swapper Tainted: P        W   2.6.35-24-generic #42-Ubuntu
[22:57] <silent_h> I can paste the whole trace if needed, but didn't want to clog the room.  Any ideas?
[22:57] <FloodBot1> silent_h: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[22:57] <Stevezau> ah man.. has anyone here got the nvidia ion2 GT218 hdmi audio working on ubuntu 10.10?? I have removed audiopulse as i want passthrough but it just won't work :|
[22:58] <elgan> !ops
[22:58] <kcorcoran> anyone use sabnzbplus?
[22:58] <mongy> kcorcoran, only via lottanzb
[22:58] <nit-wit> elliott, http://members.iinet.net/~herman546/p20/GRUB2%20Configuration%20File%20Commands.html#Loopback_Boot_Entry
[22:59] <silent_h> Hey all.  I'm using 10.10 64-bit and my /var/log directory keeps filling up (~7GB) due to kern.log and messages growing too big.  I looked at the logs to see what the problem was, and here's what it has: http://paste.ubuntu.com/549392/
[22:59] <elliott> nit-wit: thanks. wouldn't it be simpler to unpack the ISO to a separate partition, though?
[22:59] <lickalott> silent_h - http://pastebin.com/
[22:59] <silent_h> thanks, sorry didn't know about that before.  Link is just above
[22:59] <kcorcoran> mongy:  is it fairly easy to setup?
[22:59] <nit-wit> elliott, I have no idea  always have the correct tools
[23:00] <mongy> kcorcoran, very.
[23:00] <nit-wit> *I
[23:00] <carson> Whats a good CD burner for Linux
[23:00] <mongy> kcorcoran, need the 0.6 ppa version of lotta to use sabnzb with it.
[23:00] <kmck> So, i went to preferences>appearance and i was looking at the themes they had, i clicked on the link to get more themes and went to the first click-able option on the site 'Controls' and downloaded what was called 'evil mac' then i hit the install button on the appearance window and found the file i had downloaded, once i clicked it a message came up and said it was successfully installed however when i was trying to use it a message kept coming up sa
[23:00] <itaylor57> carson: brasero
[23:00] <carson> itaylor57 thanks
[23:01] <elliott> kmck: you got cut off.
[23:02] <bopnet> Boa noite galera!!!
[23:02] <kmck> elliott: so my entire message didn't go through?
[23:02] <elliott> kmck: indeed. cut off at "kept coming up sa".
[23:03] <daeda1us> trying to configure grub to add haiku to the menu, but as ubuntu is the only os on the box, theres no menu.lst
[23:03] <rww> Umm. Anyone know what elgan wanted?
[23:03] <daeda1us> what can i do to configure the menu?
[23:03] <kmck> ...saying that it hadn't been downloaded correctly or was incomplete... so then i deleted it out of appearance to try and re-install... when i clicked install and clicked on the same file it now says "evil mac was not installed successfully: you can not overwrite directory-to-directory" ... i'm assuming this is a simply fix? but i'm not sure what's going on?
[23:04] <kmck> elliott: did the rest come thru that time?
[23:04] <mongy> carrier disconnect #@##!
[23:04] <kmck> elliott: or i guess the second half :)
[23:04] <elliott> kmck: yes
[23:04] <bopnet> Algum brasileiro por ai!!!
[23:04] <rww> !br | bopnet
[23:04] <Xintruder> Any Arabic Ubuntu user her? pls msg me
[23:04] <rww> !arabic
[23:04] <cutegirl96> hi, how can I make double tap on my touchpad be right click and triple tap be middle click?
[23:04] <trism> daeda1us: check out: https://help.ubuntu.com/community/Grub2#Custom Menu Entries
[23:04] <d9500> kmck: did you manually remove evil-mac from .themes as well?
[23:05] <elliott> ha @ half-arabic message
[23:05] <daeda1us> thank you very much trism
[23:05] <elliott> now make it a palindrome :-)
[23:05] <kmck> no
[23:05] <bopnet> obrigado
[23:05] <kmck> d9500: no, how do i delete/find the .themes folder and .gnome
[23:06] <d9500> kmck: open nautilus, press ctrl+h to show hidden files, find and open .themes. see if there's any theme in there labeled something like .evil-mac
[23:06] <d9500> kmck: and delete it if there is
[23:06] <ccvp> mongs, 2 issues left,
[23:06] <lassaad> Hi
[23:07] <ccvp> "install" button needs to be installed for lottanzb to work?
[23:07] <steiner> when trying to connect to a printer on a windows computer, i think i have everything set up, but when i print a test page it asks for a password.
[23:07] <kmck> d9500: nautilus, sorry i'm still very new with Ubuntu
[23:07] <kmck> d9500: the comma should of been a ? haha
[23:07] <steiner> how do i disable it or what should i enter?
[23:08] <lassaad> please tell me how to run an application from terminal (like gedit) without keeping Terminal busy ?
[23:08] <d9500> kmck: nautilus is a file manager (think windows explorer on vist or windows 7.) If you click places--home folder on your top taskbar, nautilus will open and show the files in that folder.
[23:08] <ccvp> I just popped in my 2TB drive into sata port, and ubuntu is detecting it, but its not mounted, so im about to format it then mount within Disk Utility, but what "type" should i chose? EXT4(default)? and leave checkbox for take ownership of file system?
[23:08] <GeekSquid> lassaad: gedit && disown
[23:08] <oskar-> lassaad:  add a single "&" after the command
[23:09] <user__> Hi there Guys And happy new year 2 everyone
[23:09] <lassaad> Ok, thanks
[23:09] <SwedeMike> ccvp: it's sane defaults, it's usually what people want.
[23:10] <user__> anyine with Ubuntu installed on an  iMAC?
[23:10] <kcorcoran> mongy:  excellent recommendation; thanks.  that was very easy to get up and running.  i had downloaded sabnzbplus, but was at a loss on how to configure.
[23:10] <lassaad> is there any possibity to make the & automatically
[23:10] <lassaad> ?
[23:10] <nawk> I need help with my LIVEUSB.  Basically I have Ubuntu 10.10 iso burnt onto my usb and its working.
[23:10] <vikasap> I am not able to perform upgrades, could anyone please help
[23:11] <ccvp> 7200 RPM 64mb cache, 2TB Western DIgital Caviar Greens were on sale at bestbuy today for $100
[23:11] <ccvp> is that good price? so i bought just 1, didnt want 2
[23:11] <nawk> what I need help with is to resize the aufs (another unionfs) that the LIVECD creates
[23:11] <nawk>  I want to be able to make it bigger
[23:11] <amerinese> what's a good resource for learning/reading about configuring things from the command line only?
[23:11] <cutegirl96> hi, how can I make double tap on my touchpad be right click and triple tap be middle click?
[23:11] <cutegirl96> hi, how can I make double tap on my touchpad be right click and triple tap be middle click?
[23:12] <DasEi> nawk: persistent install and still space left on the usb ?
[23:12] <cutegirl96> lassaad: no, linux is not a mind reader, it does what you tell it to do.
[23:12] <vikasap> I get the following errors in my update manager : http://paste.ubuntu.com/549394/ , coule anyone please help me fix my problem
[23:12] <ccvp> heh, how long is this gonna take to format a 2TB drive in DIsk Utility to ext4? it doesnt do a "quick" format?
[23:12] <ccvp> gonna do the entire drive?
[23:12] <amerinese> for example i looked up network configuration and got a lot of articles on using the GUI, but i want to learn about the command line / config files
[23:13] <cutegirl96> amerinese: help.ubuntu.com, read the server guide
[23:13] <kcorcoran> mongy:  you there?
[23:13] <mongy> yup
[23:13] <nawk> DasEi: could you elaborate?  If I'm not mistaken there is a casper-rw which is 128MB
[23:14] <Jacruth> hi, how could I change the password of one user in the terminal? chpasswd? editing /etc/passwd?
[23:14] <lupowaco> Guyes an chance someone with Apple Imac?
[23:14] <ccvp> can't you just do passwd "username" ?
[23:14] <lickalott> apple = poo
[23:14] <DasEi> nawk: you installed ubuntu to usb, and want to resize the installation..
[23:14] <kcorcoran> mongy:  this isa quick/easy application.  do you know of any other "like" applications that have more information?  for instance, when i use newsleecher, it will tell me the max download, average download speeds...
[23:14] <d9500> Jacruth: passwd <name of user>
[23:14] <red2kic> Jacruth: "passwd billy"
[23:14] <Jacruth> thanks!
[23:14] <chrisb> I'm trying to install a python package that I downloaded from sourceforge. I extracted the tar.gz archive using tar -zxvf [file name], navigated inside the extracted directory, and ran "sudo python install.py install" and it errored out. Help?
[23:14] <lupowaco> apple is ok man :P
[23:14] <DasEi> nawk: that makes me assume there is space left on the usb
[23:14] <ccvp> ok, this format is taking longer then i expected
[23:14] <lupowaco> Better than windows at least the MACos
[23:14] <mongy> kcorcoran, lottanzb/sabnzb beta ppa has webserver function.
[23:15] <ccvp> 2TB drive better not take 2-3 hours to format NTFS to EXT4
[23:15] <ccvp> doesnt it just do a "quick format"? etc
[23:15] <red2kic> ccvp: How long have it been?
[23:15] <mongy> kcorcoran, not unlike ninan, which is browser based via java... much more advanced tho
[23:15] <ccvp> 3min
[23:15] <DasEi> nawk: and also I assume you can write to the usb, once it's booted, changes remain, so it's not a live, but a persistant install
[23:15] <red2kic> ccvp: Wait 30 minutes. I'd say. :3
[23:15] <ccvp> it was in win7before, now its ext4 for my media library
[23:15] <nawk> DasEi: well, the installation is created on an aufs which is generated by the LiveCD.  Ultimately I want to have some room to work with
[23:15] <mongy> kcorcoran, http://ubuntuforums.org/showthread.php?t=1234982  there, I did that.
[23:16] <mongy> kcorcoran, a bit rough around the edges...
[23:16] <nawk> DasEi: but there is no room to work with since there's 0 MB left on the aufs filesystem
[23:16] <kcorcoran> mongy:  yea, at a loss with sabnzbplus...still new to ubuntu and reviewed the wiki for sabnzbplus - couldn't understand how to configure and launch
[23:16] <DasEi> nawk: and usb has space left
[23:16] <DasEi> nawk : size of the usb ?
[23:16] <nawk> DasEi there is plenty of space on the USB
[23:16] <nawk> its just that the aufs is 100% utilized
[23:16] <Jacruth> does the cp command support "overwriting"?
[23:17] <ccvp> ok done
[23:17] <ccvp> 4m27s on a Q9300 6gig ddr3 took to format 2TB
[23:17] <dsnyders> nawk, can you not move some of the files from the aufs onto the usb?
[23:17] <lickalott> i'm just messing with you lupowaco
[23:17] <red2kic> Jacruth: Yes. Automatically. Check "cp --help" or "man cp" -- If you want interactive (yes/no), use :cp -i"
[23:17] <red2kic> "cp -i"
[23:18] <ccvp> red2kic, wtf
[23:18] <DasEi> nawk: basically two ways : either view the usb as a standard harddrive , and use it that way, or think of it like a live install, then can have an additional partiton for downloads, but.. can't make installs , that will remain after reboot
[23:18] <lickalott> i have a VM running Leopard
[23:18] <cutegirl96> hi, how can I make double tap on my touchpad be right click and triple tap be middle click?
[23:18] <cutegirl96> hi, how can I make double tap on my touchpad be right click and triple tap be middle click?
[23:18] <Jacruth> red2kic, I saw it, but I dont know If I should use --remove-destiantion or --force
[23:18] <red2kic> ccvp: 2-WTFING-TB
[23:18] <ccvp> in disk Utility, it shows HPFS/NTFS(0x07) as Partition Type, even tho in Volumes, its listed as EXT4 with the label i gave it? whats going on?
[23:18] <lupowaco> hahah get lickalott :)
[23:18] <Jacruth> or even --update, red2kic
[23:18] <cutegirl96> Jacruth: sure...
[23:18] <lickalott> ;)
[23:18] <ccvp> why does it have an identifier
[23:18] <ccvp> of hpfs/ntfs? if i formatted it as ext4?
[23:18] <lupowaco> Any idea on How to fix the airport on an imac running ubuntu?
[23:19] <ccvp> it was previously ntfs for win7
[23:19] <lupowaco> :(
[23:19] <JeroenDeDauw> Something with my network config got messed up I think - I cannot connect to the interwebs anymore (with another device obviously). How to reset all network settings?
[23:19] <amerinese> cool, reading docs about command line network config here: https://help.ubuntu.com/10.10/serverguide/C/network-configuration.html. i thought ip was replacing ifconfig?
[23:19] <mongy> kcorcoran, if you wanna use it, use the 0.6 ppa for lottanzb and also ppa for sabnzb,  info is on lottanzb.org
[23:19] <cutegirl96> amerinese: why did you think that?
[23:19] <ccvp> this is my last issue i seem to have
[23:19] <lickalott> neg lupowaco
[23:19] <amerinese> someone mentioned that to me?
[23:19] <red2kic> Jacruth: I don't know. I generally use "cp -a" to copy few files. Nothing deep.
[23:19] <DasEi> nawk : how did you install to the usb ?
[23:20] <fructose> I could use some troubleshooting help... I'm trying to connect my Ubuntu machine through the Internet using internet connection sharing. It worked last night, but I rebooted Ubuntu (and not the Windows machine) and now it doesn't connect
[23:20] <lupowaco> No worries thanks anw ;)
[23:20] <amerinese> not sure, not really used ifconfig before except to find out the ip address
[23:20] <ccvp> mongy in disk utility, the drive shows Partition Type: HPFS/NTFS(0x07) even tho in the big greybar showing its storage area visually, it says 2.0TB ext4.......
[23:20] <Jacruth> thanks red2kic, Ill try on the way
[23:21] <ccvp> oh wait, why is it asking me to manually chose the "Type"
[23:21] <dsnyders> ccvp, did you repartition it?  The system will think it is the original partition type until you reboot or re-read the partition tables.
[23:21] <mongy> ccvp, what does gparted show
[23:21] <kcorcoran> mongy:  looking at it now.  is it worth going to a web UI?  what is the advantage?  just more features?
[23:21] <ccvp> formatting doesnt do this alone?
[23:21] <ccvp> in the Disk Utility app?
[23:21] <chrisb> I'm trying to install a python package that I downloaded from sourceforge. I extracted the tar.gz archive using tar -zxvf [file name], navigated inside the extracted directory, and ran "sudo python install.py install" and it errored out. Help?
[23:21] <mongy> kcorcoran, well, ninan has a LOT more features, and its hidden...
[23:21] <ccvp> i will chose Linux (0x83) and not make it bootable
[23:21] <cutegirl96> chrisb: be less vague.
[23:21] <Gartral> light sensors, who has them working?
[23:21] <nawk> DasEi Universal USB Installer
[23:21] <ccvp> one sec.
[23:21] <cutegirl96> hi, how can I make double tap on my touchpad be right click and triple tap be middle click?
[23:21] <cutegirl96> hi, how can I make double tap on my touchpad be right click and triple tap be middle click?
[23:22] <cutegirl96> hi, how can I make double tap on my touchpad be right click and triple tap be middle click?
[23:22] <FloodBot1> cutegirl96: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[23:22] <kcorcoran> mongy: hidden?  can you elaborate that and why that's good or bad/
[23:22] <mongy> kcorcoran, but saying that, with lotta/sab there is ability to show it via web
[23:22] <GeekSquid> chrisb: try sudo python install install.py
[23:22] <trism> chrisb: it would be help if you pastebin the error
[23:22] <mongy> kcorcoran, ninan is only used via browser, meaning its running but no window open, tray icon etc
[23:23] <GeekSquid> !repeat | cutegirl96
[23:23] <kcorcoran> mongy:  so by hidden you;re saying its less resource intensive?
[23:23] <mongy> kcorcoran, well, it uses java, so not really.. hidden means its background process, and server like
[23:23] <ccvp> ok i changed the partition to Linux (0x83)
[23:23] <DasEi> nawk: so live or persistent ?
[23:23] <kcorcoran> mongy:  gotcha...makes sense
[23:23] <mongy> kcorcoran, you use it by connecting to it viz browser...
[23:24] <mongy> viz*
[23:24] <mongy> via*!!
[23:24] <ccvp> in DIsk Utility, and its still not mounted................maybe ill stop, whats the process to repartition this 2TB drive to go entirely EXT4, and formatted and mounted?
[23:24] <kcorcoran> mongy:  its just a service and i view it by a web UI?  that the correct way to think of it./
[23:24] <kcorcoran> ?
[23:24] <elliott> ccvp: mkfs.ext4
[23:24] <ccvp> type that in cmd prompt?
[23:24] <chrisb> Thanks. I'll try it right now. Sorry, cutegirl96. I'm trying to install MySQL-python1.2.3. I used wget to download the file to /usr/local/lib.
[23:24] <mongy> kcorcoran, yes
[23:24] <elliott> ccvp: um. you have to give it parameters.
[23:25] <kcorcoran> mongy:  sorry, trying to tranlate this so i understand...trying to migrate from windows 100%
[23:25] <ccvp> the drive is currently /dev/sda1
[23:25] <elliott> ccvp: sudo mkfs.ext4 /dev/sda1. say.
[23:25] <mongy> kcorcoran, lotta/sabnzb is a decent solution..
[23:25] <kcorcoran> mongy:  so if i following your link to install ninan it will allow me to view via web UI?
[23:25] <ccvp> will that format it too?
[23:25] <mongy> kcorcoran, yes.
[23:26] <ccvp> its writing "inode tables" now
[23:26] <kcorcoran> mongy:  reading your link, what username is that referring to?  the usenetserver credentials?
[23:26] <ccvp> 1100 out of 14905
[23:27] <mongy> kcorcoran, oh, username = your home
[23:27] <mongy> kcorcoran, couldnt figure a way to auto do everything...
[23:27] <GeekSquid> chrisb: I think you would have better luck with sudo apt-get install python-mysqldb
[23:27] <mongy> kcorcoran, so you need to amend it to /home/'you'
[23:28] <nawk> DaeEi i can't remember, but I have a casper-rw ext3 filesystem which is setup as a loop device, its of 128MB
[23:28] <DrunkenRambler> Hi.  How can I run a python script every time I  log on? (gnome-terminal localy or ssh from elsewhere)
[23:28] <kcorcoran> mongy: if i run through the process to install right now would you have a few minutes to help walk me through it in the event i run into a snag?
[23:28] <mongy> kcorcoran, I guess
[23:29] <chrisb> What was that aptitude package again?
[23:29] <GeekSquid> chrisb: python-mysqldb
[23:29] <nawk> DaeEi: okay, ultimatley what I want to achieve is use the LiveCD environment while I have the freedom (freepsace) to install things here and there to try
[23:29] <nawk> I believe things are different with recent versions of Ubuntu now.
[23:29] <DasEi> nawk: seems persistant than.. if your lucky and it is next to the free space can resize it , safer is an extra partitition though to not mess the uuids
[23:30] <ccvp> why is mkfs.ext4 reserving 5% of my drive
[23:30] <ccvp> for super user?
[23:30] <carson> Im trying to install Puppy Linux on my old old computer, but i cant seem to be able to boot it from CD, can someone explain to be how to boot from CD, i feel stupid that i cant get it to work :P
[23:30] <chrisb> Thank you thank you thank you!
[23:30] <chrisb> You guys are awesome.
[23:30] <GeekSquid> chrisb: no problem
[23:30] <ActionParsnip> carson: puppy isnt supported here
[23:30] <DasEi> nawk: that are two different things, space to install or spaceto store
[23:30] <nawk> Previously, I could install softwares as I wish during the "Try before install" environment, nothing is persistent
[23:30] <carson> ActionParsnip what do you mean?
[23:31] <ActionParsnip> carson: this is ubuntu support, not puppy
[23:31] <DasEi> nawk: which size has the usb ?
[23:31] <nawk> that's like before 9.04 (or 9.10) tho
[23:31] <ShawnRisk> how do I share files between two Ubuntu Laptops?  I am able to access my printer that is on the network but not the computers.  They are using wireless
[23:31] <nawk> its a 4GB USB
[23:31] <ActionParsnip> ShawnRisk: could install openssh-server and use sftp / sshfs or you can use samba
[23:31] <carson> well sorry, i was here anyway asking what i should use, Xubuntu or Puppy so i thought i might as well ask, but okay il switch to the puppy channel if they have it
[23:32] <DasEi> nawk: that doesn't really make sense then
[23:32] <ActionParsnip> carson: thanks :)
[23:32] <ShawnRisk> ActionParsnip: there is no easier way?
[23:33] <DasEi> nawk:you could do a "native install like you would do to a harddisk, but it will be filled up easily, you don't just install, but also d/l things
[23:33] <ActionParsnip> ShawnRisk: what could be easier than samba?
[23:33] <ShawnRisk> right
[23:33] <kcorcoran> mongy:  the link states to install java, however the 1st step appears to be an installation of java - should i install java via synaptic or is the 1st step actually addressing the java installation?
[23:34] <mongy> kcorcoran, its old post, let me look
[23:34] <TyrantElf> Has anyone else had problems with the catalyst driver?  things like blender showing static and lagging and the screensaver not working?
[23:34] <DrunkenRambler> How can I run a specific python script whenever I (or anyone else) logs in remotely (ssh)?
[23:34] <DasEi> nawk: in that case use usb-creator,make the writeable space ~300 MB smaller than maximum possible and get the most of that stick
[23:34] <mongy> kcorcoran, ah yes, you need to enable partner repo, or use openjdk, which might be installed already
[23:34] <mongy> kcorcoran, it works, i tried it
[23:35] <ccvp> ok this is weird
[23:35] <ccvp> disk utility still shows "partition type HPFS/NTFS(0x07) , do u gotta reboot?
[23:35] <kcorcoran> mongy:  you're talking to someone very new to ubuntu.  can you simplfy your last answer?  should install java very synaptic or run that first command?
[23:35] <ShawnRisk> ActionParsnip: I thought Samba was to connect a Linux computer to Windows.
[23:36] <nawk> DasEi: NEGATIVE, USB-Creator does not correctly create Ubuntu LiveUSB
[23:36] <mongy> kcorcoran, well maybe you should use lottanzb, its a nice little gui that works
[23:36] <nawk> in fact, the Developers should take note
[23:36] <rami1983> hey,  where can i get the linux mint menu? i like the right click uninstall button...
[23:36] <DasEi> nawk: it does, see above tip (and format stick with fat before, 1 Partitition)
[23:36] <ActionParsnip> ShawnRisk: not specifically, it shares the folder using samba, Linux and Mac and Windows can access samba shares so is a totally acceptable option
[23:37] <mongy> kcorcoran, java -version ?
[23:37] <nawk> it fails to fix the bootloader configurations between syslinux and isolinux
[23:37] <mohalaci> hy
[23:37] <ActionParsnip> nawk: use unetbootin then, i've never had an issue with usb-creator personally, do you md5 test your ISOs?
[23:37] <nawk> DasEi that is a different discussion all together.
[23:37] <infid> my pc has a wireless card and ifconfig is showing 'wlan0, but i'm only using it as a 'wired' connection. How do i disable the wlan0 interface so it doesnt lag me or anything
[23:37] <ShawnRisk> ActionParsnip: okay let me try
[23:38] <ActionParsnip> infid: sudo ifdown wlan0
[23:38] <kcorcoran> back in a bit
[23:38] <aimio> how come i don't have the choice to use gnome in my session bar at login?
[23:38] <nawk> ActionParsnip, it has nothing to do with the MD5.  it matches.  I have success with Universal USB Installer
[23:38] <DasEi> nawk: as far as I got you you now have a usb install with persistant space taking about 1 Gig of the usb. Resizing will be a fiddle, since it's live-fs, and additional partition won't allow installs
[23:38] <GeekSquid> infid: right click on network icon on top bar.. uncheck enable wireless
[23:39] <infid> GeekSquid: it's already not using wireless. and 'sudo ifdown wlan0' is saying it's not configured. yet it still shows up in 'ifconfig'
[23:39] <ActionParsnip> nawk: if the ISO is bad, then the bootable device made with the image will be bad, so YES it does have something to do with it
[23:40] <ActionParsnip> infid: if you run: sudo lshw -C network   is the interface unclaimed?
[23:40] <mohalaci> Az automatikus csatolás meghiúsult: A(z) org.gtk.vfs.mountpoint.http csatolási pontja már fut
[23:40] <mohalaci> miért kapom ezt?
[23:40] <mohalaci> médialejátszó youtube bövitménye...
[23:40] <nawk> ActionParsnip but I've already told you that it matches.  The problem is in that usb-creator doesn't fix the bootloader config difference between syslinux and isolinux
[23:40] <DasEi> mohalaci: spain ?
[23:40] <DasEi> !es
[23:40] <cache_surplus> hi
[23:40] <cache_surplus> happy new year :)
[23:40] <mohalaci> hungary :)
[23:41] <infid> ActionParsnip: *-network:0
[23:41] <ActionParsnip> nawk: thats fine, but the MD5 is important, and you said it wasn't
[23:41] <mongy> kcorcoran, best not use the links on there to get the program, best use the main site itself..get latest version. :)
[23:41] <luxurymode> !es
[23:41] <GeekSquid> !hu
[23:41] <mohalaci> thx :)
[23:41] <ActionParsnip> nawk: have you logged a bug / is one logged already?
[23:41] <TyrantElf> infid: it won't lag you or anything, just leave it, you might need it.
[23:41] <infid> ok
[23:41] <GeekSquid> future reference running a whois on the users ip will tell you what country they are in
[23:41] <jon_athon> What's a good text editor to use in shell?
[23:42] <ActionParsnip> jon_athon: nano
[23:42] <infid> jon_athon:  vim
[23:42] <nawk> ActionParsnip, I didn't say it wasn't important.  The problem I'm having "has nothing to do with MD5"
[23:42] <aimio> GeekSquid, i installed ubuntu 10.10 on my computer and now when i wanna choose Gnome down at the session bar at "login".. there is none i forgot how i fix this..
[23:42] <TyrantElf> jon_athon: try nano
[23:42] <GeekSquid> aimio: if you login what do you get?
[23:42] <infid> jon_athon: i take back vim. vim is dangerous to run as sudo
[23:42] <ActionParsnip> nawk: is there a bug logged to get the usb-creator app fixed so it does what its supopsed to do?
[23:42] <jon_athon> infid, why's that?
[23:42] <aimio> netbook session.
[23:43] <aimio> but i hate that.. i want normal..
[23:43] <infid> jon_athon: it has security issues last i checked that shouldnt be ran as elevated privs
[23:43] <jon_athon> ActionParsnip, TyrantElf I've used nano, I was wondering if there are any other spiffy editors
[23:43] <nawk> crap.  The system is so low in space that I can't even do an 'ls'
[23:43] <GeekSquid> aimio: sudo apt-get install ubuntu-desktop ... should get you rolling
[23:43] <nawk> I get an I/O error
[23:43] <aimio> kk
[23:43] <aimio> thank you.
[23:43] <TyrantElf> jon_athon: nano is secure and has many features
[23:43] <infid> jon_athon: it's also more difficult to use, a lot more powerful than nano though if you want to have a serious programming editor in a shell
[23:43] <infid> but jsut for editing configuration files and stuff nano is probably better
[23:43] <ActionParsnip> nawk: try using bleachbit and/or uninstall openoffice and/or remove excess kernels
[23:44] <jon_athon> Thanks all, I guess I'll stick with nano, I did just install VIM so I'll check it out when I get into programming
[23:44] <linxeh> jon_athon: if you seriously get into programming, get something better than vim
[23:45] <jon_athon> linxeh, reccomendations?
[23:45] <GeekSquid> linxeh: jon_athon: emacs would be a step up for programming, but very difficult to learn
[23:45] <infid> linxeh: thems fighting words :P, i have been programming a decade and havent found anything definitively 'better'
[23:45] <jon_athon> what about pico?
[23:45] <rami1983> how  to register my nickname?
[23:45] <ActionParsnip> !register | rami1983
[23:45] <nawk> ActionParsnip Is there some changes to Ubuntu I'm not aware about?  Previously, with my experiences with releases (before 9.10), I could freely install problems even when I'm in the LIVECD environment.  Now, I seem to be limited by space.
[23:46] <jon_athon> thanks GeekSquid
[23:46] <nawk> s/problems/programs/
[23:46] <linxeh> GeekSquid: I used to use emacs. its not really what I meant
[23:46] <linxeh> infid: I've been programming for over 20 years (to varying degrees)
[23:46] <infid> jon_athon: i think nano is pico's replacement
[23:47] <jon_athon> ah, interesting that it's still pre-packagd then
[23:47] <ActionParsnip> nawk: you can in the newer ones too, you are just limited by RAM as the liveCD boots to RAM disk
[23:47] <infid> well vim or emacs are what most serious programmers in linux use
[23:47] <linxeh> infid: and by better, I mean a tool that has an understanding of the language you are programming in and can offer decent refactoring support. as an example, IntelliJ for Java (but there are tools that offer similar capabilities in many languages)
[23:47] <linxeh> infid: nano is a free version of pico
[23:47] <GeekSquid> jon_athon: I love linux... redundancy redundancy redundancy
[23:47] <nawk> and I got 6 GBs
[23:47] <nawk> hmmm....
[23:47] <infid> refactoring support is rarely that immportant vs allt he other needed features. if thats all you care about then netbeans woudl be good enough for crying out loud
[23:47] <jon_athon> GeekSquid, hmmm, seems superfluous
[23:48] <ccvp> why is there a circle still spinning in the disk utility application?
[23:48] <ccvp> does that mean its still repartitioning etc?
[23:48] <ActionParsnip> nawk: thats plenty, should be fine#
[23:48] <GeekSquid> jon_athon: better word yet
[23:48] <NixGeek> Okay, thats better
[23:48] <PhonicUK> where does ubuntu store the grub config file?
[23:48] <NixGeek> tyrantelf is my gaming scren name
[23:48] <PhonicUK> its not in /boot/grub/menu.lst or grub.conf
[23:48] <ActionParsnip> PhonicUK: its /boot/grub/grub.cfg but you shouldn't manually edit it
[23:48] <jon_athon> GeekSquid, heh, motivation to learn how to recompile my own "distro"
[23:48] <linxeh> infid: refactoring support is a major issue, as are debuggers and profilers (and most suck)
[23:49] <PhonicUK> ActionParsnip, I don't intend to, I gotta copy the entries from it into the Android installed grub xD
[23:49] <linxeh> infid: what other features are you suggesting are needed ?
[23:49] <Gartral> PhonicUK, what are you working on?
[23:49] <linxeh> infid: we should take this into offtopic I guess :P
[23:49] <PhonicUK> My Eee 701
[23:49] <GeekSquid> jon_athon: are you prepared to hire a development team, and setup offices, like Mark Shuttleworth did with $300M by building Canonical? Go right ahead
[23:49] <PhonicUK> I made a spare partition to install Android into
[23:50] <PhonicUK> but it overwrote grub
[23:50] <mongy> its the one and only ActionParsnip who loves correcting people on omgubuntu.. keep it the good work lol
[23:50] <PhonicUK> so now I gotta boot into it by hand using the grub command line
[23:50] <infid> linxeh: fefactoring support is major if you're a java programmer. more useful features to me are shell/db/etc integration, memory foot print, stability, community, ability to use within gnu screen, have multiple instances running, powerful editing features, scriptability, etc
[23:50] <ActionParsnip> mongy: good fun, specially when pictures can be used too...
[23:50] <infid> yeah i digress
[23:50] <jon_athon> GeekSquid, No, I just meant to learn how to do it for my personal use... like the old school hackers, when the word didn't mean something evil O_o
[23:51] <mongy> ActionParsnip, its more work than 1 person can handle though surely.
[23:51] <herculano> evening
[23:51] <ActionParsnip> mongy: most things in life are
[23:51] <ccvp> Disk Utility may be lagging
[23:51] <PhonicUK> can someone tell me what the latest kernel version is please?
[23:51] <linxeh> infid: its major if you are a java, C#, C++, C, or a developer in any other language
[23:51] <ccvp> that stupid circle is still spinning
[23:51] <ccvp> even though i already mounted the new drive to a point
[23:51] <PhonicUK> or rather, the latest ubuntu kernel version
[23:52] <GeekSquid> PhonicUK: for what version of ubuntu?
[23:52] <PhonicUK> 10.10
[23:52] <ccvp> why does my system still say my drive is hpfs/ntfs(0x07)
[23:52] <GeekSquid> !info linux-kernel
[23:52] <infid> linxeh: i can refactor find in vim for most things 'global search and replace'. what do you have in mind that matters for say a php programmer?
[23:52] <linxeh> infid: each to their own though
[23:52] <ccvp> even though i formatted/partitioned it as ext4? visual glitch?
[23:52] <rww> !info linux-image-generic
[23:52] <ccvp> it was previously formatted as ntfs for 7, is this a bug?
[23:52] <linxeh> infid: there isnt enough money in the world to make me touch php
[23:53] <infid> php programmers face the same problems as most other modern languages
[23:53] <infid> as far as general programming
[23:53] <ActionParsnip> !info linux-image-generic | PhonicUK
[23:53] <elliott> infid: indeed! they also suffer from all of php's problems too
[23:53] <linxeh> infid: they face more problems; they have to use php
[23:53] <Dumfries> Using landscape is  there a way to manually trigger a registration? I am creating a Chef recipe and can't seem to find a way to do it non-interactively.
[23:53] <infid> for sure
[23:54] <infid> php isnt the problem, it's that 98% or so of php coders abuse php too much
[23:54] <Guest37016> hi, guys
[23:54] <ccvp> infid, you know whats hilarious
[23:54] <infid> whereas someone who actually knows multiple languages and knows best practices probably uses it fine
[23:54] <Guest37016> i'd like to know how can i send a private message to a user here
[23:54] <linxeh> php is awful.
[23:54] <ccvp> finding insecure php includes
[23:54] <rww> !iot
[23:54] <Guest37016> i'm trying /msg user message
[23:54] <rww> !ot
[23:54] <Guest37016> but it's not working
[23:55] <ActionParsnip> Guest37016: use:  /msg nick message
[23:55] <linxeh> rww: sorry :)
[23:55] <Guest37016> for me
[23:55] <ccvp> infid, type this into google: "index of" "db.inc"
[23:55] <rww> Guest37016: that should work :\
[23:55] <ccvp> insecure php includes all over the web, lulz
[23:55] <Guest37016> i'm using irssi
[23:55] <ActionParsnip> Guest37016: remember to ask before you PM someone too
[23:55] <infid> ccvp: well thats not php's fault thats the clueless programmers fault
[23:55] <rww> Guest37016: have you checked for a newly-opened window? Use Ctrl-n to switch to the next window.
[23:55] <infid> ok now i feel bad, going too far offtopic
[23:55] <elliott> infid: I can write good code in BASIC, too
[23:55] <elliott> infid: doesn't mean BASIC doesn't suck
[23:55] <elliott> although BASIC is actually better structured than php.
[23:55] <infid> suck is realtive. php finds me steady income
[23:56] <Guest37016> i'm sending to another user that i'm handling in other client
[23:56] <elliott> ergo you're biased :)
[23:56] <rww> elliott: take it to #ubuntu-offtopic, please
[23:56] <Jacruth> hi, I have installed Compiz and I'm using CompizConfig, how could I make changes of CompizConfig to take effect quickly?
[23:56] <infid> no i dont think it's a great lang, just that i can use it fine. i'm more of a python fan
[23:56] <ActionParsnip> elliott: it is cheap and quick,  but isn't good
[23:56] <elliott> rww: i'll just shut up instead :)
[23:56] <rww> ;P
[23:56] <ActionParsnip> Jacruth: if you use ccsm, the changes are made on the fly
[23:56] <mongy> Jacruth, by using compizconfig-settings-manager
[23:56] <infid> when is ubuntu going to start doing rolling releases?
[23:56] <rww> infid: It's not.
[23:56] <mongy> damn, why didnt I say ccsm
[23:57] <elliott> when's ubuntu going to start compiling all packages!
[23:57] <aeon-ltd> Jacruth: what? the changes are immediate if not restart compiz
[23:57] <PhonicUK> is there an easy way to make Ubuntu just re-install grub?
[23:57] <aeon-ltd> !fixgrub | PhonicUK
[23:57] <ActionParsnip> PhonicUK: boot to livecd, you can do it there
[23:57] <Jacruth> I'm not sure of that, ActionParsnip, for example, I have the keys "Super" + "Control" to activate the fire and it does not work yet
[23:57] <Jacruth> aeon-ltd, which command will restart it?
[23:57] <PhonicUK> aye s'prolly easiest way
[23:57] <PhonicUK> liveusb ftw
[23:57] <PhonicUK> doing this on a netbook, no optical drive xD
[23:58] <aeon-ltd> Jacruth: killall compiz && compiz --replace
[23:58] <Jacruth> thanks aeon-ltd.
[23:58] <infid> is the netbook version of ubuntu any better yet? last i tried it a year ago it was just limiting what you can do each release
[23:58] <iNdO> ur on crack
[23:58] <PhonicUK> infid, its really good now
[23:58] <rww> infid: Matter of opinion, I guess. I dislike 10.10's. 11.04 is somewhat better.
[23:58] <mongy> infid, its never limiting...
[23:58] <ActionParsnip> infid: i dislike the new unity thing but old school netbook is still pretty sweet
[23:59] <infid> PhonicUK: does it let you use the normal menu now?
[23:59] <PhonicUK> its basically the same as the normal desktop version but without some of the unneeded packages (video editor for example) and an optional netbook friendly UI
[23:59] <rgb247> anyone know how can I join on the #PHP channel ?
[23:59] <PhonicUK> I just use the normal gnome desktop though
[23:59] <rgb247> I need to be invited to join there?
[23:59] <ActionParsnip> rgb247: /joing #php
[23:59] <PhonicUK> but yeah even in netbook ui mode you can just use the normal menu
[23:59] <ActionParsnip> rgb247: then you must register
[23:59] <GeekSquid> !register | rgb247
[23:59] <rww> rgb247: try ##php
[23:59] <rgb247> actionparsnip: can you teach me how to do that?
[23:59] <mongy> ActionParsnip, +1.  has shuttleworth tried visiting youtube with unity there. doh
[23:59] <iNdO> bunch of HACKERS
[23:59] <rgb247> !register | rgb247
[23:59] <Mackbet> How to install googleearth on ubuntu?