[00:36] <nerdful1> greetings, working on a question.......
[00:38] <nerdful1> I unplugged my all-in-one mythbox from ethernet for awhile. When disconnected, I opened frontend to check on upcoming recordings...it complained that it could not connect to backend... So I reconnected, found no upcoming recordings scheduled. I rebooted, and found that it looked ok to record. But:
[00:39] <nerdful1> When I went to "recordings" to watch a show in process of recording, it said it could not find file. The busy circle was going in the menu, the backend status on mythweb said tuner is recording.
[00:41] <nerdful1> I can't find evidence of recordings being made, although it "thinks" it is doing the chores ok.  Database health all says ok, I rebooted again, no go, an also No Live TV. It sees tuner, but no signal shows.
[00:42] <nerdful1> Tuner is on the ethernet, it is a HDhomerun, so somehow things are corrupted, Help please, thanks.
[00:45] <nerdful1> HDhomerun is on ethernet on a reserved address on the router, so it didn't change, nor did the mythbuntu allinone box.
[01:08] <Shadow__X> nerdful1: it will not record if it is not connected to the network especially if the tuner is an hdhomerun
[01:08] <Shadow__X> :(
[01:38] <mycosys> nerdful1 get rid of networkmanager and set up ifup instead
[01:38] <mycosys> networkmanager = pain for servers
[01:39] <mycosys> you need to manually assign an ip address to the machine, so that it does not rely on dhcp to get one, so that if it boots without network, or IP is changed it will still work
[03:54] <nerdful1> mycosys: Thanks, found problem. Cable co changed all channel lineups that my HDhomerun is connected to. Coincidence that I disconnected lan, then later tuner was not apparently working. NO announcement from cable co about it. Also, I have the router reserving addresses for all my stuff.  Thanbks
[05:23] <trackstar> Hi all. Kind of a n00b question but I just hooked up my ubuntu pc to my new TV with an HDMI cable (from an on-board HDMI port) and am disappointed that it didn't automatically detect the new display. is there a trick to getting this to work?
[05:34] <Shadow__X> trackstar: try your graphics card config manager
[06:09] <somethinginteres> Anyone else having issues with Shepherd getting Aus EPG data?
[06:26] <mycosys> havent noticed any somethinginteres
[06:27] <somethinginteres> hmm OK thanks mycosys. the grabber runs apparently pulls down data but most of the channels aren't populated. It usually works just since the last batch of data got pulled down. WIll have to investigate further. Cheers
[06:28] <mycosys> just running it now to check
[06:28] <mycosys> try running with --notimetest from the console to see the output
[06:59] <somethinginteres> mycosys: OK will do
[07:11] <somethinginteres> mycosys: still seem to be getting the same error "Attempt 2 failed to fetch http://guides.news.com.au/television/profile/?action=saveProfile"
[07:11] <Zinn> [guides.news.com.au] Setup TV Channels | NEWS.com.au
[08:06] <mycosys> no error for me somethinginteres
[08:07] <mycosys> is it updating ok?
[08:08] <somethinginteres> mycosys: you mean updating the sources for grabbing the data or into the guide in mythtv?
[08:09] <mycosys> updating shepherd itself, the grabbers and prog
[08:10] <mycosys> try ./shepherd --update in ur .shepherd directory
[08:10] <mycosys> the guides change a lot, so it needs to update all the time
[08:10] <somethinginteres> mycosys: the sources all report "up to date" w/ no errors
[08:11] <mycosys> try disabling the news grabber then
[08:11] <somethinginteres> mycosys: hmm, how can I do that
[08:12] <somethinginteres> mycosys: I believe the grabber is "news v1.7"
[08:13] <mycosys> ./shepherd --disable news
[08:16] <somethinginteres> mycosys: done. Just doing a pastebin of output
[08:16] <somethinginteres> mycosys: http://paste.ubuntu.com/568642/
[08:16] <Zinn> [paste.ubuntu.com] Ubuntu Pastebin
[08:18] <mycosys> try running it with --notimetest and see what u get
[08:20] <somethinginteres> mycosys: running now
[08:30] <somethinginteres> mycosys: no errors reported
[08:38] <mycosys> :)
[08:38] <mycosys> dunno why news wasnt working for you
[08:38] <mycosys> enable it again in a week or 2 i would say
[08:51] <somethinginteres> mycosys: kk
[08:51] <somethinginteres> mycosys: thanks
[10:38] <hot_wheelz> can encoding a program for an ipod\iphone be done OTB with mytharchive in Mythbuntu?
[10:42] <mycosys> try mythencode hot_wheelz
[10:44] <mycosys> gah - mythexport
[10:44] <mycosys> is part of the distro
[10:44] <mycosys> http://www.mythbuntu.org/wiki/MythExport
[10:44] <Zinn> [www.mythbuntu.org] MythExport | Mythbuntu
[10:47] <hot_wheelz> yes of course - my bad thanks
[10:48] <hot_wheelz> so its builtin then
[10:48] <mycosys> its a plugin that is a standard part of mythbuntu
[10:49] <hot_wheelz> cool
[10:50] <mycosys> just go to [mythsevername]/mythexport
[10:50] <mycosys> in a web browser
=== Shadow__1 is now known as Shadow__X