[11:15] <gotik_> is it right that lv2rack doesn’t understand midi ports?
[21:01] <mouse> hi someone knows how to use flash with jack?
[21:12] <holstein> mouse: several ways
[21:13] <mouse> i have read some net informations.
[21:13] <mouse> but before i think its important to say i use jackd and pulse only with jack-sink an source
[21:13] <holstein> the pulse-jack bridge that falktx wrote would be easy
[21:14] <mouse> im using that already
[21:14] <holstein> OK
[21:14] <holstein> that should do it
[21:16] <holstein> pulse-jack is not routing flash audio to you're audio device running JACK ?
[21:16] <holstein> mouse: ^
[21:16] <mouse> load-module module-jack-source load-module module-jack-sink this was added to pulse default.pa
[21:16] <mouse> and the other modules were put as comment
[21:16] <mouse> no its not working
[21:17] <holstein> this is the one that falk made?
[21:17] <holstein> for kxstudio
[21:17] <holstein> the package is actually named pulse-jack
[21:17] <holstein> ?
[21:17] <holstein> mouse: for example
[21:18] <mouse> no this i do not have
[21:18] <holstein> all i did was add falks PPA
[21:18] <holstein> sudo apt-get install pulse-jack
[21:18] <holstein> then, start JACK as normal
[21:18] <holstein> open a terminal
[21:18] <holstein> and run
[21:18] <holstein> pulse-jack
[21:18] <holstein> and pulse 'shows up' in JACK connections
[21:19] <holstein> i suppose the other thing would be
[21:19] <holstein> what are you trying to do?
[21:19] <holstein> if its record some audio from a flash source
[21:19] <holstein> you might just want to ask the creator of the content
[21:20] <holstein> SO, at the same time you are getting permission, you can probably get a higher quality file
[21:20] <mouse> well i was just checking falks ppa
[21:20] <mouse> its for kxstudio
[21:20] <holstein> right
[21:20] <holstein> mouse: if you'd like
[21:20] <holstein> join #opensourcemusicians
[21:20] <holstein> and ask around
[21:20] <holstein> OR
[21:20] <holstein> join #kxstudio
[21:21] <holstein> im using falks PPA with ubuntu 10.04
[21:21] <mouse> ah ok thx for your help so far
[21:21] <holstein> sure, it'll work :)
[21:21] <holstein> mouse: i know about the sink that you are talking about
[21:21] <holstein> but i havent ever needed it
[21:22] <holstein> i can imagine needing even a web browser open on my production machine
[21:22] <holstein> much less flash
[21:22] <mouse> i want to preview samplefiles
[21:22] <holstein> but, you can
[21:22] <holstein> yeah, i guess i would stop JACK
[21:22] <holstein> go and do what i need to to
[21:22] <holstein> download them
[21:22] <holstein> and get back to JACK
[21:22] <mouse> i thought of wine
[21:23] <mouse> using the browser there
[21:23] <holstein> nah, wine wont do it
[21:23] <mouse> but there jack also does not work
[21:23] <holstein> pulse-jack is easy
[21:23] <mouse> ill try that
[21:24] <holstein> you could also download them all
[21:24] <holstein> and preview them in VLC with the JACK plugin added
[21:24] <holstein> OR audacious
[21:25] <mouse> yes butdownloading thousands of crap tones to find the one you want..
[21:25] <holstein> well, you gotta weed through them one way or the other
[21:28] <mouse> so the jack is installed
[21:28] <holstein> pulse-jack ?
[21:28] <mouse> now just restart ff and it works?
[21:28] <mouse> yep
[21:28] <holstein> you got JACK running?
[21:29] <mouse> yes
[21:29] <holstein> open 'connections'
[21:29] <mouse> and working fine with hydrogen fe
[21:29] <holstein> or whatever you use
[21:29] <holstein> patchage*
[21:29] <holstein> and then, open a terminal
[21:29] <holstein> and start the bridge
[21:29] <holstein> pulse-jack
[21:29] <holstein> then, you should see something new show up
[21:29] <holstein> i forget what its called
[21:29] <holstein> pulse-sink ??
[21:29] <holstein> something like that^
[21:30] <holstein> mouse: you might need to route the bridge
[21:30] <holstein> i cant remember if it auto connects
[21:30] <holstein> but, yeah, that should be it
[21:30] <holstein> probably need to restart FF
[21:31] <mouse> wait a sec
[21:33] <holstein> mouse: be aware that there are a lot of different packages in that PPA
[21:33] <mouse> something is wrong with pulse
[21:33] <mouse> it was running before..now it does not start
[21:34] <holstein> mouse: pulse-jack kills it
[21:34] <holstein> and restarts it so JACK can see it
[21:34] <mouse> yes well pulseaudio is not running
[21:34] <holstein> mouse: you can restart pulse after stopping jack if you want
[21:34] <holstein> alt-F2
[21:34] <holstein> then
[21:34] <holstein> pulseaudio
[21:34] <holstein> mouse: do you have it routed properly?
[21:35] <holstein> the pulse-jack bridge?
[21:35] <mouse> do i need to revert changes made before in default.pa??
[21:35] <holstein> mouse: maybe
[21:35] <holstein> ive never messed about in there
[21:35] <mouse> i followed instructions in the wiki
[21:35] <holstein> for?
[21:36] <holstein> not for falks package
[21:36] <mouse> pulseaudio through jack
[21:36] <holstein> thats for the other method
[21:36] <holstein> that didnt work for you
[21:36] <holstein> right?
[21:36] <holstein> mouse: falk is routinely around
[21:36] <mouse> yes right seems so...load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
[21:36] <mouse> load-module module-null-sink
[21:36] <mouse> load-module module-pipe-sink this uncommenting?
[21:37] <holstein> im not sure
[21:37] <holstein> ive never needed to mess with that at all
[21:37] <holstein> if its easy to revert
[21:37] <holstein> i say, go for it
[21:37] <holstein> because, ive never had anyone say falks bridge didnt 'just work'
[21:38] <mouse> ok changes reverted..its now working
[21:38] <holstein> :)
[21:38] <mouse> so now back to it..so first pulseaudio then pulse-jack
[21:38] <holstein> mouse: when i used the bridge
[21:38] <mouse> pulse-jack bridge
[21:39] <holstein> well, just get JACK running
[21:39] <holstein> then, starting pulse-jack
[21:39] <holstein> should do the rest
[21:39] <holstein> IF you need to restart afterwards
[21:39] <holstein> OR if pulse doesnt start if you reboot
[21:39] <holstein> which i had happen
[21:39] <holstein> you can start it with pulseaudio
[21:39] <holstein> i made a startup item for it
[21:40] <holstein> and ive totally spaced mentioning that to falk
[21:40] <holstein> its probably something on my end
[21:43] <mouse> so when starting pulseaudio manually it starts
[21:43] <mouse> also as a daemon
[21:43] <mouse> when i start pulse-jack
[21:44] <mouse> it says its running need to stop then pulsejack then failed to load daemon
[21:46] <mouse> ah playback only works
[21:46] <mouse> yep now it showed up
[21:46] <mouse> as a connection in jack
[21:46] <holstein> yeah, thats the deal
[21:46] <mouse> let me test
[21:48] <mouse> hmm..youtube fe still silent :(
[21:48] <mouse> pulseaudio jack sink is connected with the output
[21:48] <holstein> mouse: all pulse *should* be routed there
[21:49] <holstein> is for me
[21:50] <holstein> well, i gotta grab a nap before the gig
[21:50] <mouse> pulseaudio meter shows no audio output
[21:50] <holstein> mouse: check over in #opensourcemusicians