[03:34] <zuixro> My Myth box has started automagically restarting the frontend any time it crashes (or I kill it from ssh). Is there a way to stop this?
[08:10] <qwebirc63886> Good Evening is any body around ?
[08:11] <qwebirc63886> I have a Fusion HDTV DVB-T Dual PCIe that i install with Mythbuntu, Its dected the card
[08:12] <qwebirc63886> but i can use it to scan
[08:24] <qwebirc63886> any ideas ?
[17:32] <emunson> I am having trouble with a Hauppage HVR-1600 card not being initialized properly by the kernel
[17:32] <emunson> the relevant lines from dmesg are:
[17:32] <emunson> [    2.188360] cx18-0: Registered device video0 for encoder MPEG (64 x 32.00 kB)
[17:32] <emunson> [    2.188364] DVB: registering new adapter (cx18)
[17:32] <emunson> [    2.209447] cx18-0: frontend initialization failed
[17:32] <emunson> [    2.209699] cx18-0: DVB failed to register
[17:32] <emunson> [    2.209802] cx18-0: Registered device video32 for encoder YUV (20 x 101.25 kB)
[17:32] <emunson> [    2.209832] cx18-0: Registered device vbi0 for encoder VBI (20 x 51984 bytes)
[17:32] <emunson> [    2.209858] cx18-0: Registered device video24 for encoder PCM audio (256 x 4.00 kB)
[17:32] <emunson> [    2.210136] cx18-0: Error -1 registering devices
[17:32] <emunson> [    2.419746] cx18-0: Error -1 on initialization
[17:32] <emunson> [    2.419798] cx18: probe of 0000:04:01.0 failed with error -1
[17:32] <emunson> [    2.419827] cx18:  End initialization
[17:33] <emunson> THe only possible solution I have found is setting vmalloc size (I have an nVidia graphics card) but this did not work for me
[17:33] <emunson> is there anything else I can try?
[18:09] <emunson> Sorry for the log spam, I have the same + slightly more information at
[18:09] <emunson> [    1.652851] cx18:  Start initialization, version 1.4.0
[18:09] <emunson> [    1.652974] cx18-0: Initializing card 0
[18:09] <emunson> [    1.652989] cx18-0: Autodetected Hauppauge card
[18:09] <emunson> [    1.656867] ppdev: user-space parallel port driver
[18:09] <emunson> [    1.676302] nvidia: module license 'NVIDIA' taints kernel.
[18:09] <emunson> [    1.676308] Disabling lock debugging due to kernel taint
[18:09] <emunson> [    1.687359] type=1400 audit(1301588898.732:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=629 comm="apparmor_parser"
[18:09] <emunson> [    1.688027] type=1400 audit(1301588898.732:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=629 comm="apparmor_parser"
[18:09] <emunson> [    1.688386] type=1400 audit(1301588898.732:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=629 comm="apparmor_parser"
[18:09] <emunson> [    1.703687] cx18 0000:04:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[18:09] <emunson> [    1.710305] cx18-0: cx23418 revision 01010000 (B)
[18:09] <emunson> [    1.716124] lp0: using parport0 (interrupt-driven).
[18:09] <emunson> [    1.720269] type=1400 audit(1301588898.764:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=653 comm="apparmor_parser"
[18:09] <emunson> [    1.933832] tveeprom 0-0050: Hauppauge model 74351, rev F1F5, serial# 7384278
[18:09] <emunson> [    1.933837] tveeprom 0-0050: MAC address is 00:0d:fe:70:ac:d6
[18:09] <emunson> [    1.933839] tveeprom 0-0050: tuner model is NXP 18271C2 (idx 155, type 54)
[18:09] <emunson> [    1.933842] tveeprom 0-0050: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[18:09] <emunson> [    1.933845] tveeprom 0-0050: audio processor is CX23418 (idx 38)
[18:09] <emunson> [    1.933847] tveeprom 0-0050: decoder processor is CX23418 (idx 31)
[18:09] <emunson> [    1.933850] tveeprom 0-0050: has no radio
[18:09] <emunson> [    1.933851] cx18-0: Autodetected Hauppauge HVR-1600
[18:09] <emunson> [    1.933854] cx18-0: Simultaneous Digital and Analog TV capture supported
[18:09] <emunson> [    2.010479] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[18:09] <emunson> [    2.010484] hda_intel: Disable MSI for Nvidia chipset
[18:09] <emunson> [    2.010486] hda_intel: codec_mask forced to 0xf2
[18:09] <emunson> [    2.010527] HDA Intel 0000:01:00.1: setting latency timer to 64
[18:09] <emunson> [    2.024534] IR NEC protocol handler initialized
[18:09] <emunson> [    2.043640] IR RC5(x) protocol handler initialized
[18:09] <emunson> [    2.068020] Registered IR keymap rc-rc6-mce
[18:10] <emunson> [    2.068124] input: Media Center Ed. eHome Infrared Remote Transceiver (1784:0001) as /devices/virtual/rc/rc0/input4
[18:10] <emunson> [    2.068177] rc0: Media Center Ed. eHome Infrared Remote Transceiver (1784:0001) as /devices/virtual/rc/rc0
[18:10] <emunson> [    2.068201] mceusb 3-2:1.0: Registered Topseed eHome Infrared Transceiver on usb3:3
[18:10] <emunson> [    2.068223] usbcore: registered new interface driver mceusb
[18:10] <emunson> [    2.070326] IR RC6 protocol handler initialized
[18:10] <emunson> [    2.111270] IR JVC protocol handler initialized
[18:10] <emunson> [    2.120180] IR Sony protocol handler initialized
[18:10] <emunson> [    2.137649] lirc_dev: IR Remote Control driver registered, major 250
[18:10] <emunson> [    2.141492] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[18:10] <emunson> [    2.141495] IR LIRC bridge handler initialized
[18:10] <emunson> [    2.162117] type=1400 audit(1301588899.208:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=805 comm="apparmor_parser"
[18:10] <emunson> [    2.162781] type=1400 audit(1301588899.208:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=805 comm="apparmor_parser"
[18:10] <emunson> [    2.163141] type=1400 audit(1301588899.208:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=805 comm="apparmor_parser"
[18:10] <emunson> [    2.172500] type=1400 audit(1301588899.216:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=812 comm="apparmor_parser"
[18:10] <emunson> [    2.176050] type=1400 audit(1301588899.220:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=810 comm="apparmor_parser"
[18:10] <emunson> [    2.184477] cs5345 0-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
[18:10] <emunson> [    2.188360] cx18-0: Registered device video0 for encoder MPEG (64 x 32.00 kB)
[18:10] <emunson> [    2.188364] DVB: registering new adapter (cx18)
[18:10] <emunson> [    2.209447] cx18-0: frontend initialization failed
[18:10] <emunson> [    2.209699] cx18-0: DVB failed to register
[18:10] <emunson> [    2.209802] cx18-0: Registered device video32 for encoder YUV (20 x 101.25 kB)
[18:10] <emunson> [    2.209832] cx18-0: Registered device vbi0 for encoder VBI (20 x 51984 bytes)
[18:10] <emunson> [    2.209858] cx18-0: Registered device video24 for encoder PCM audio (256 x 4.00 kB)
[18:10] <emunson> [    2.210136] cx18-0: Error -1 registering devices
[18:10] <emunson> [    2.419746] cx18-0: Error -1 on initialization
[18:10] <emunson> [    2.419798] cx18: probe of 0000:04:01.0 failed with error -1
[18:10] <emunson> [    2.419827] cx18:  End initialization
[18:10] <emunson> Sorry for the log spam, the logs are available at http://pastebin.com/MsBUAAQ3
[18:10] <emunson> My problem is my Hauppage card (HVR-1600) is not being initialized
[18:10] <emunson> I have tried altering the vmalloc size because I am using an nVidia video card but this did not help
[18:11] <Zinn> [pastebin.com] hvr-1600-boot - Pastebin.com
[19:21] <mrand> I would google the following and see what turns up:    failed "cx18: probe of"
[19:32] <emunson> did that, nothing  came up
[19:32] <emunson> that is how I found the vmalloc fix, but address space is not the issue I am having
[19:32] <emunson> THe other error I see is tied to IRQ's but the card seems to claim IRQ 16 without issue