[01:04] <peteforsyth> tgm4883: I got it up and running! with much help from people at #mythtv-users. But now the final step I need is getting IR blaster running, and I ran into trouble -- the guy that was helping me said it appeared mythbuntu-specific.
[01:04] <peteforsyth> are you able to help me get the IR stuff working?
[01:07] <peteforsyth> or is there anybody here with IR blaster savvy? I feel so close to finally getting my myth box up and running!
[01:09] <peteforsyth> I have a Hauppauge PVR150, it has a dongle with both an IR transmitter and a receiver for its own remote. Hoping to get both working..but especially the transmitter, so I can change channels from the PC!
[05:00] <rileyp> mycosys I just removed the avenard repo and installed mythbuntu one and ran update is there any else i need do? with regard to the avenard repo
=== dad_ is now known as Guest43499
[07:21] <mycosys> dunno - dont think so
[07:21] <mycosys> never used avenard
[07:21] <mycosys> jus seen people here saying that doing so is unsupported, and him saying not to do so if you want trunk
[07:22] <mycosys> lol sorry rileyp
[07:22] <mycosys> didnt see that was 2 hours ago rofl
[07:25] <Guest43499>      Ive used vaneard in the past because it just works
[07:26] <mycosys> so do the mythbuntu repos
[07:26] <Guest43499> mycosys in on other pc now rileyp
[07:26] <mycosys> Guest43499 = rileyp ?
[07:26] <Guest43499> yep
[07:27] <Guest43499> in was supposed to be I'm
[08:17] <qwebirc85274> hi, Hi have a Asrock 330 ion box, used as a FE only, I use hdmi into a Yamaha receiver (5.1), sound works great, except  for one of the rear channels doesnt work.   Is there a work around for this or not?
[08:19] <mycosys> one of???
[08:20] <mycosys> when did you start using avenard rileyp/ Guest43499? what version of myth?
[08:21] <Guest43499> around .20 or .21
[08:23] <Guest43499> qwebirc85274,  I have same when I do sound check in myth the speakers dont line up the same as sound check on the yamaha.Never resolved went back to 2.1 and let the yamaha change it to 5.1
[08:25] <Guest43499> when myth does the sound sound check I get fl + fr and then when I should rr I get centre and then fl again and no rl and no center
[08:25] <Guest43499> I have a passive sub that my 2 front speakers are wired through (in and out fl and fr
[10:59] <rileyp> 30 1 * * * root /usr/sbin/xfs_fsr -t 21600 >/dev/null 2>&1
[10:59] <rileyp>  I have multiple drives with xfs will this work on all of them?
[10:59] <rileyp> ie sdb1 and sdc6 and sdd3
[11:00] <mycosys> dunno rileyp i dont use xfs
[11:01] <mycosys> i thought it would be 0.21 when u used avenard - was the only way afaik to get vdpau on it among other things
[11:01] <rileyp> >/dev/null 2>&1 Its just this bit here I dont understand
[11:02] <rileyp> I can run that from a terminal but use /dev/sdb1 on the end normally not >/dev/null 2>&1
[11:02] <rileyp> or whatever the partition is  I have 3 xfs parttions though so do I need 3 crontab entries?
[11:04] <rileyp> myscosys yes It prolly was. It just made installing the latest nv drivers easy as well when 195 was out and 185 was only available with the normal repo
[11:06] <mycosys> that is to make it run silently
[11:06] <rileyp>  >/dev/null 2>&1 this means run silent?
[11:06] <mycosys> dev/null is the bit bucket
[11:07] <rileyp> Oh fuck this is getting trickier by the second
[11:07] <Zinn> rileyp: Please watch your language.
[11:07] <mycosys> dunno about the 2>&1, presume that is to background it lol
[11:07] <rileyp> http://www.mythtv.org/wiki/Optimizing_Performance#Combat_fragmentation
[11:07] <Zinn> [www.mythtv.org] Optimizing Performance - MythTV Official Wiki
[11:08] <mycosys> ahh - logs errors to stdout, hides normal output
[11:09] <mycosys> 2>&1 redirects stderr to stdout
[11:09] <rileyp> ok so if I dont point to a particular /dev/parttion it will look all by itself for xfs aparttions?
[11:11] <mycosys> nfi - never used it - i am on ext
[12:56] <adubz> ok just updated to the 11.04 and have hdmi audio working "for now"  two issues when i exit there is a buzzing sound that is high pitched and constant it does not stop unless i reboot the other issue is now my remote control is overly sensitive if i hit one button it registers two clicks
[12:58] <adubz> my remote is mce style remote
=== hpeter_ is now known as hpeter
[15:37] <pladijs> is there a masterpackage which when removed will remove all of myth? and when reinstalled will reinstall everything? Or more generally: how do i get a entirely fresh mythtv installation on ubuntu? Thing is i have seen very strange behaviour (segfaults, unresponsive menus, etc) but i think this is due to excessive newbie-style messing around with my configuration.
[17:14] <adubz> ok just updated to the 11.04 and have hdmi audio working "for now"  two issues when i exit there is a buzzing sound that is high pitched and constant it does not stop unless i reboot the other issue is now my remote control is overly sensitive if i hit one button it registers two clicks my remote is an mce remote
[17:15] <pladijs> should i remove something from the sql database when attempting a clean installation?
[17:36] <pladijs> how do i restore the database after deleting the old one
[18:58] <adubz> ok just updated to the 11.04 and have hdmi audio working "for now"  two issues when i exit there is a buzzing sound that is high pitched and constant it does not stop unless i reboot the other issue is now my remote control is overly sensitive if i hit one button it registers two clicks
=== pladijs_ is now known as pladijs
=== pladijs_ is now known as pladijs
=== pladijs_ is now known as pladijs