| === asac_ is now known as asac | ||
| === XorA|gone is now known as XorA | ||
| ogra_ | E: config/chroot_local-hooks/preinstall-pool.sh failed (exit non-zero). You should check for errors. | 11:38 |
|---|---|---|
| ogra_ | infinity, ^^^ where do i find that ? searching for that script in either livecd-rootfs or live-build doesnt reveal anything | 11:38 |
| ogra_ | oh, got it, ignore me | 11:39 |
| * ogra_ didnt expect a here doc | 11:39 | |
| ogra_ | hmm, i dont see why it failed and it doesnt spitinto the log | 11:47 |
| ogra_ | s/spitinto/spit out anything into/ | 11:48 |
| === mayday_jay is now known as mayday_jay-away | ||
| ogra_ | cm'on publisher, spit out an ubuntu-meta for me | 12:29 |
| * ogra_ twiddles thumbs | 12:29 | |
| === mayday_jay-away is now known as mayday_jay | ||
| === doko_ is now known as doko | ||
| siji | hi all | 13:50 |
| siji | am facing some prblm (may cose of less expertise) while trying to build kernel module | 13:51 |
| siji | I have downloaded the kernel source from rep. by apt-get install linux-source | 13:53 |
| siji | extracted and tried to build only touch screen module | 13:53 |
| siji | by the command make modules SUBDIRS=drivers/input/touchscreen/ | 13:54 |
| siji | But it built only three modules, even more dirver files are there | 13:56 |
| siji | Where am wrong ? | 13:56 |
| * ogra_ suggests to ask in #ubuntu-kernel | 13:57 | |
| siji | ogra_, ok | 13:57 |
| siji | Hope they wont redirect me here again :) | 13:57 |
| ogra_ | heh, i doubt it | 13:58 |
| siji | ;) | 13:58 |
| ogra_ | dou did configure it before, right ? | 13:58 |
| siji | yes | 13:58 |
| siji | ogra_, btw, i was not aware of that ubuntu is having this much IRC channels | 14:04 |
| ogra_ | every team has one usually | 14:04 |
| ogra_ | and then there is #ubuntu-devel,#ubuntu and #ubuntu-meeting | 14:04 |
| siji | oh.. | 14:04 |
| siji | ya, it's very easy to get help , isntead of messing up everything in a single channel | 14:05 |
| siji | *instead | 14:05 |
| ogra_ | we started out with #ubuntu-devel only ... but as the developer community grew it got to niosy | 14:06 |
| siji | ok | 14:07 |
| siji | so you people are having seperate team for each ? | 14:08 |
| ogra_ | there is a desktop team, a kernel team etc etc | 14:11 |
| siji | ok, so there might be a ubuntu-arm team too (assumes you are became part of it ) | 14:12 |
| ogra_ | right | 14:13 |
| siji | cool .. | 14:13 |
| siji | ogra_, this is for you | 14:16 |
| siji | <apw> siji, if you have ARM specific questions you may get quicker answers on #ubuntu-arm, the peeps who mostly have the h/w hang out there | 14:16 |
| siji | :) | 14:16 |
| siji | :) | 14:16 |
| === ericm|ubuntu is now known as ericm-Zzz | ||
| === ericm_ is now known as ericm-Zzzz | ||
| === zyga is now known as zyga-afk | ||
| N3o | hello! Is there a problem with the repositories ? I get many Hash Sum mismatch after doing an apt-get update on a PandaBoard with natty | 15:43 |
| N3o | this is my sources.list file and the errors I get: http://pastebin.com/NAEteeXh | 15:45 |
| rsalveti | janimo: libvirt bug 823711 | 15:48 |
| ubot2 | Launchpad bug 823711 in libvirt "libvirt version 0.9.2-4ubuntu8 failed to build on armel" [Undecided,New] https://launchpad.net/bugs/823711 | 15:48 |
| GrueMaster | N3o: There has been some issues with the pool for the last few days. This may be some of the fallout. Work is being done to clean it up. | 15:49 |
| ogra_ | rsalveti, yeahm, thats a weird one | 15:49 |
| * ogra_ comments | 15:49 | |
| janimo | rsalveti, yes, I'll look at that | 15:50 |
| infinity | GrueMaster: Erm, there's been nothing that would cause hash sum mismatches. Just archive skew. | 15:53 |
| ogra_ | infinity, well, look at the cdimage buildlogs for today xubuntu builds | 15:53 |
| ogra_ | they expose the same | 15:53 |
| infinity | N3o: The usual suspect for hash sum mismatch issues is either a slightly broken mirror, or having a proxy (often a transparent one) between you and the archive. | 15:53 |
| infinity | ogra_: Yes, but this is natty he's using. | 15:54 |
| rsalveti | GrueMaster: janimo: u-boot SPL is basically a replacement for x-loader | 15:54 |
| ogra_ | its the third time today i hear someone mentioning hash sum mistmatches with the archive | 15:54 |
| rsalveti | u-boot will now generate u-boot.bin and MLO | 15:54 |
| rsalveti | code reuse now, only one source package and the SPL can probably boot the kernel directly :-) | 15:54 |
| rsalveti | and once we add the usb support at SPL, it'll behave like omap4boot | 15:55 |
| GrueMaster | rsalveti: COOL!!! | 15:55 |
| rsalveti | we'll see how it goes for our 11.08 release, if it goes well we can do a FFe for ubuntu | 15:55 |
| ogra_ | rsalveti, any reason to not go with the binary header for u-boo.bin instaed and get rid of MLO completely ? | 15:56 |
| rsalveti | well, you can think of MLO as a minimal u-boot now | 15:57 |
| rsalveti | being able to boot the kernel directly is like having u-boot | 15:57 |
| rsalveti | but without the fancy stuff, like cmdline and such | 15:57 |
| ogra_ | right, but we still need two files | 15:57 |
| janimo | rsalveti, worth mentioning what SPL is (or link) in the spec whiteboard :) | 15:57 |
| rsalveti | janimo: sure, will add | 15:58 |
| rsalveti | http://www.omappedia.org/wiki/U-boot_Upstreaming_Project | 15:58 |
| N3o | Thanks GrueMaster && infinity -- I don't have any kind of proxy so it has to be those issues you were talking about | 16:00 |
| N3o | I'll try again in a few days | 16:00 |
| janimo | rsalveti, thanks, sounds good | 16:00 |
| GrueMaster | N3o: Actually, I just rebooted into natty, and am updating now without error. Try rerunning apt-get update. | 16:00 |
| N3o | roger | 16:01 |
| N3o | same :( | 16:01 |
| N3o | maybe I should try some cleaning? | 16:01 |
| GrueMaster | couldn't curt. | 16:02 |
| GrueMaster | *hurt | 16:02 |
| N3o | tried that too | 16:02 |
| N3o | same thing | 16:02 |
| === mayday_jay is now known as mayday_jay-away | ||
| N3o | could you check my sources.list http://pastebin.com/NAEteeXh and confirm it is ok? | 16:03 |
| infinity | N3o: Are you sure you're not behind a transparent proxy at your ISP? It's a pretty common thing that many/most people aren't aware of. :/ | 16:04 |
| N3o | nope, I'm 100% positive | 16:04 |
| N3o | I'm wondering, does apt-get goes trough IPv4 or IPv6? | 16:05 |
| infinity | Yes. | 16:05 |
| infinity | Whichever route is lower cost. | 16:05 |
| infinity | Well, this is assuming ports.u.c has an AAAA, I don't recall. :P | 16:06 |
| GrueMaster | N3o: Your sources.list is identical to mine. | 16:06 |
| N3o | thanks GrueMaster | 16:06 |
| N3o | disabled IPv6 and trying again | 16:09 |
| N3o | same :( | 16:11 |
| N3o | tried with sudo apt-get update -o Acquire::BrokenProxy=true and sudo apt-get update -o Acquire::http::No-Cache=True --- same effect | 16:15 |
| GrueMaster | Try commenting out the failing archives from your sources.list, rerun apt-get update, then uncomment and rerun again. | 16:19 |
| N3o | ok | 16:19 |
| ogra_ | rsalveti, wrt x-loader, i was referring to http://www.omappedia.org/wiki/E-MMC_boot#You_can_boot_omap3630_without_x-loader ... which i think works on omap4 as well | 16:32 |
| ogra_ | that would save us from using MLO at all | 16:32 |
| GrueMaster | Should work well from emmc...oh, wait. | 16:34 |
| ogra_ | GrueMaster, emmc isnt different from mmc (SD card) | 16:36 |
| N3o | dayum | 16:36 |
| LeCherLich | ogra_: i have a question about getting the newest ubuntu to work on the Beagleboard xM rev A. i went to #beagle first, but av500 redirected me here | 16:36 |
| N3o | something is wrong ... | 16:36 |
| N3o | still can't install things | 16:36 |
| ogra_ | LeCherLich, yes, i saw that | 16:36 |
| LeCherLich | i always get to the point where linux is uncompressed, it says "Uncompressing Linux... done, booting the kernel." and a couple of seconds later it crashes and begins all over: "Texas Instruments X-Loader" ... | 16:37 |
| ogra_ | LeCherLich, the desktop images have no serial enabled by default, if you want a verbose serial boot i'd suggest the server image ... you can indeed change boot.scr on a desktop image to dump out stuff to serial if you know what you are doing | 16:38 |
| LeCherLich | i used the headless arm image | 16:38 |
| LeCherLich | following the instructions at https://wiki.ubuntu.com/ARM/OMAPHeadlessInstall | 16:38 |
| LeCherLich | do i still have to change boot.scr? | 16:38 |
| GrueMaster | LeCherLich: Which image did you download? Natty? | 16:38 |
| LeCherLich | GrueMaster: yes | 16:39 |
| GrueMaster | LeCherLich: Which img.gz did you download? omap or omap4? | 16:41 |
| N3o | universe + multiverse not working... | 16:41 |
| LeCherLich | GrueMaster: omap | 16:41 |
| GrueMaster | Are you on a linux host? Try "wget -O - http://cdimage.ubuntu.com/releases/11.04/release/MD5SUMS|fgrep ubuntu-11.04-preinstalled-headless-armel+omap.img.gz | md5sum -c -" | 16:42 |
| GrueMaster | Verify your image is good. | 16:43 |
| LeCherLich | GrueMaster: the checksum is 6913.......fffc (cant copy+paste, i use a linux host, but its not this one) | 16:44 |
| LeCherLich | seems to be good, according to the MD5SUMS file in the release folder | 16:44 |
| GrueMaster | ok | 16:45 |
| GrueMaster | Try reflashing the SD. How big is the SD you are using? | 16:45 |
| LeCherLich | 4gig.. so i should just repeat the whole process of installing (zcat ... > /dev/sdb) ? | 16:47 |
| GrueMaster | Try the gunzip |dd method. I have seen issues with the zcat>/dev method. | 16:48 |
| LeCherLich | oh sorry i just looked at the history... i used the gunzip method already. | 16:50 |
| LeCherLich | so should i try zcat now? | 16:50 |
| GrueMaster | I have not had issues with the gunzip method, and found it to be reliable. I have had %60 success rate with zcat. That doesn't sound like the issue though. | 16:51 |
| GrueMaster | You had mentioned zcat, which I have seen issues with, which is why I went down that path. | 16:52 |
| LeCherLich | sorry my mistake | 16:52 |
| LeCherLich | is there any way to make ubuntu more talkative, via the kernel line maybe? | 16:53 |
| GrueMaster | You may want to try a modified boot.scr on the 1st partition of the SD. To modify it, you will need to strip the first 72 bytes of data from boot.scr. | 16:53 |
| GrueMaster | dd if=boot.scr of=boot.script bs=1 skip=72 | 16:54 |
| GrueMaster | Then you can edit boot.script. Remove "quiet" from the bootargs line. | 16:54 |
| GrueMaster | Then you can rebuild the boot.scr with "mkimage -A arm -O linux -T script -C none -d boot.script boot.scr" | 16:55 |
| GrueMaster | Make sure there is a "console=/dev/ttyO2,115200n8" on the bootargs. | 16:56 |
| LeCherLich | there was only console=ttyO2,115... (without /dev).. is that right? | 16:57 |
| GrueMaster | Ah, yes. my bad. | 16:58 |
| LeCherLich | oh okay, thanks, now it's more talkative... | 16:59 |
| LeCherLich | it hangs at about 9 seconds. last messages: mmcblk0: p1 p2 <newline> hub 1-2:1.0: USB hub found <newline> hub 1-2:1.0: 5 ports detected ... <crash> | 17:01 |
| LeCherLich | pretty much right after it detected the mmc card... | 17:02 |
| LeCherLich | could it be that there is a hardware problem with this card? | 17:03 |
| LeCherLich | GrueMaster: anyways thank you very much, i will try to solve the problem tonight on my own, i may return later | 17:05 |
| === LeCherLich is now known as LeCherLich|away | ||
| GrueMaster | ok, sorry I couldn't help more. Maybe try adding "earlyprintk=/dev/ttyO2,115288n8" to your cmdline and see what that produces. | 17:11 |
| === TheUni_ is now known as TheUni | ||
| === zyga-afk is now known as zyga | ||
| === prpplague^2 is now known as prpplague | ||
| === LeCherLich|away is now known as LeCherLich | ||
| === micahg_ is now known as micahg | ||
| === apachelogger is now known as dslogger | ||
| === mayday_jay-away is now known as mayday_jay | ||
| ZiNC | Hey. | 22:06 |
| === Jack87|Away is now known as Jack87 | ||
| === Jack87 is now known as Jack87|Away | ||
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!