| === Jack87|Away is now known as Jack87 | ||
| twb | 20:31 <lilstevie> twb, did you get that? | 04:00 |
|---|---|---|
| twb | lilstevie: I did now :-) | 04:00 |
| twb | 19:32 <twb`> What does "ld: no machine record defined" mean? | 04:00 |
| twb | lilstevie: any idea about that one? | 04:00 |
| lilstevie | none | 04:01 |
| twb | Dammit | 04:01 |
| lilstevie | never seen ld trip on that before | 04:01 |
| twb | I suspect it's something hf-related | 04:01 |
| lilstevie | maybe | 04:01 |
| travalas | Hello, I'm having trouble getting anything on the USB bus to show up with ubuntu on a beagle board. I've tried two different versions of the prebuilt ubuntu and neither of them work. It seems to be fine under angstrom. Thoughts? | 04:47 |
| tmzt | it's an error from the linxu kernel source | 04:48 |
| tmzt | not ld | 04:48 |
| tmzt | it's intentional, means you haven't enabled a machine | 04:48 |
| tmzt | so it cant' find a certain section in the image | 04:49 |
| travalas | somebody mentioned that it might be a problem with USB_POWER_EN | 05:01 |
| travalas | anybody have any pointers? | 05:01 |
| === MrCurious_ is now known as MrCurious | ||
| === MrCurious is now known as 15SABCKTE | ||
| twb` | tmzt: please explain, or tell me what docs I should be reading; "enable machine" is too vague for me to work out what to do | 05:07 |
| twb` | Googling for either that or the error isn't helping, and the .S that refers to the error just says "if you get this, your binutils is too old" -- which I doubt | 05:08 |
| twb` | GNU ld (GNU Binutils for Debian) 2.21.53.20110910 | 05:08 |
| lilstevie | twb`: MACH_whatever isn't enabled | 05:11 |
| twb` | I don't know what that means. | 05:12 |
| twb` | You mean like MACH_TEGRA ? | 05:13 |
| twb` | Would it be getting the "whatever" part from .config, or what? | 05:13 |
| lilstevie | yeah | 05:14 |
| lilstevie | like MACH_VENTANA | 05:14 |
| twb` | http://paste.debian.net/129908/ | 05:15 |
| lilstevie | where is MACH_PICASSO | 05:16 |
| twb` | I turned it off because it didn't make sense to me :P | 05:17 |
| twb` | TF101 isn't an AC500 | 05:17 |
| lilstevie | but I told you they were mutually exclusive | 05:17 |
| twb` | How do you mean mutually exclusive? | 05:18 |
| lilstevie | muromec should have put depends=CONFIG_MACH_PICASSO on MACH_TF101 | 05:18 |
| lilstevie | board-picasso contains what is needed for the tf101 | 05:18 |
| twb` | OK, so it's just me being stupid, I will try turning PICASSO on again | 05:18 |
| lilstevie | you really shouldn't turn turn off things in the config without making sure :) | 05:19 |
| lilstevie | arm is a lot different to x86 :p some things that don't make sense are enabled for unknown reasons :) | 05:19 |
| lilstevie | well appear to be unknown | 05:19 |
| lilstevie | until you dig | 05:19 |
| twb` | I was mislead by the Kconfig help string | 05:20 |
| twb` | OK, now it passed the spot where it stopped before. Yay. | 05:31 |
| === 15SABCKTE is now known as MrCurious_ | ||
| twb` | lilstevie: so what is the process to get u-boot onto the tf? I guess step #1 is to git clone u-boot? | 05:43 |
| twb` | Hmm, apt-get install u-boot u-boot-tools | 05:43 |
| lilstevie | correct flash config, build u-boot, correct flash config | 05:54 |
| lilstevie | installing u-boot like that wouldn't work :p | 05:54 |
| lilstevie | u-boot is not generic | 05:54 |
| twb` | Well, obviously once I apt-get install the tools I need to use them to generate an image and nvflash it onto the device or something | 05:55 |
| twb` | lilstevie: does turning VFP on mean that hard-float is off? | 05:56 |
| twb` | Oh V is for vector not virtual | 05:57 |
| lilstevie | VFP is central to hardfloat :p | 05:59 |
| lilstevie | as for the tools, they are more for making the right images for initrd and kernel image | 06:00 |
| lilstevie | but the kernel image is already one | 06:00 |
| lilstevie | done | 06:00 |
| lilstevie | if you make with 'make uImage' | 06:00 |
| twb` | But if I do "make uImage", how does the initrd get into the image | 06:01 |
| twb` | Or can u-boot just find the kernel and ramdisk in /boot like an x86 bootloader | 06:01 |
| lilstevie | when using uboot you dont put the initrd in the image | 06:01 |
| lilstevie | you have a uImage and a uInitrd | 06:01 |
| twb` | Aha, on amd64 "apt-get install u-boot" gives you a useless empty package, but on armhf I can see it providing stuff for other arm systems (efika, omap3, etc) | 06:03 |
| tmzt | anybody know a fast way to byte swap values in c? | 06:04 |
| tmzt | use the networking functions to do it? | 06:04 |
| tmzt | I'm trying to dump a uimage file as it's parts (it's a multi uncompressed) | 06:04 |
| twb` | Poking around in the u-boot git tree, I can see "make harmony_config" and "make seaboard_config" but nothing else pointing at include/config/tegra2-common.h | 06:23 |
| twb` | And I see now that "make uImage" in linux will run u-boot-tools' "mkimage" internally. | 06:24 |
| lilstevie | make ventana CROSS_COMPILE=cross-compiler-arm DEV_SRC_TREE="tegra-tf101" | 06:25 |
| twb` | In the u-boot source? | 06:25 |
| lilstevie | yes | 06:26 |
| twb` | make: *** No rule to make target `ventana'. Stop. | 06:26 |
| lilstevie | hmbleh | 06:29 |
| lilstevie | i dont remember look on the xda board | 06:29 |
| lilstevie | somewhere in general muromecs thread has the info | 06:29 |
| twb` | I never got the hang of web forums, but I'll try | 06:29 |
| twb` | Looks like xda-developers has a robots.txt or something that gives preferential treatment to google over duckduckgo :-/ | 06:32 |
| twb` | http://forum.xda-developers.com/showthread.php?t=1202541 suggests ventana_config, /me tries | 06:33 |
| lilstevie | thats it | 06:33 |
| twb` | And it looks like he has a fork of u-boot so maybe I need to use that instead of mainline u-boot | 06:34 |
| lilstevie | I didn't do the port so I don't remember | 06:34 |
| lilstevie | oh yeah it isn't in mainline | 06:34 |
| twb` | Waah | 06:39 |
| twb` | /usr/src/u-boot/lib/sha1.c:228:1: internal compiler error: in maybe_add_or_update_dep_1, at sched-deps.c:845 | 06:40 |
| === popey_ is now known as popey | ||
| === doko_ is now known as doko | ||
| === Jack87 is now known as Jack87|Away | ||
| === lool- is now known as lool | ||
| === chrisccoulson_ is now known as chrisccoulson | ||
| === travalas_ is now known as travalas | ||
| === fisuk1 is now known as fisuk | ||
| ogra_ | janimo, so we should check what files we actually have for mx5 | 09:53 |
| ogra_ | i suspect its just the publishing/html generating code that has a hiccup | 09:53 |
| ogra_ | and that the image is actually fine | 09:53 |
| janimo | ogra_, we should only have the .gz I guess. The first test runs did not produce iso, just the sep 14 run | 09:53 |
| janimo | which was not manual so likely the setup needs to be changed a bit | 09:54 |
| ogra_ | it is still an img.gz, the code generating the suffix actually uses file on the unzipped file | 09:54 |
| janimo | but it is 1.5G | 09:54 |
| janimo | is there a build of mx5 with the uboot file being found? | 09:55 |
| ogra_ | bah, i'm blind | 09:55 |
| ogra_ | we have both ! | 09:55 |
| janimo | right, when I meant we have iso I meant in addition, not instead, should have worded better :) | 09:55 |
| * ogra_ only saw the img.gz and img.gz.zsync files | 09:55 | |
| ogra_ | well, i could have looked better :) | 09:55 |
| ogra_ | so get a dvd reader then ... | 09:56 |
| ogra_ | Calling uboot-mkimage on kernel and initrd | 09:57 |
| ogra_ | mkimage: Can't open /srv/cdimage.ubuntu.com/scratch/ubuntu/daily-preinstalled/preinstalled/armel+mx5.kernel-mx5: No such file or directory | 09:57 |
| ogra_ | make: *** [bin-preinstalled_images] Error 1 | 09:57 |
| ogra_ | so why do we have that .iso file there | 09:57 |
| ogra_ | ARGH !!!!!!! | 09:57 |
| ogra_ | Calling uboot-mkimage on kernel and initrd | 09:57 |
| ogra_ | mkimage: Can't open /srv/cdimage.ubuntu.com/scratch/ubuntu/daily-preinstalled/preinstalled/armel+mx5.kernel-mx5: No such file or directory | 09:57 |
| ogra_ | make: *** [bin-preinstalled_images] Error 1 | 09:57 |
| ogra_ | err | 09:57 |
| ogra_ | wrong paste | 09:57 |
| ogra_ | Publishing armel+mx5 ... | 09:57 |
| ogra_ | WARNING: Unknown file type 'Linux rev 1.0 ext3 filesystem data, UUID=2e4ade6f-20c2-4670-9475-51fe999a8d0e'; assuming .iso | 09:57 |
| ogra_ | Making armel+mx5 zsync metafile ... | 09:57 |
| ogra_ | grnbl | 09:58 |
| ogra_ | gah | 09:59 |
| ogra_ | so the live builder produces: livecd.ubuntu-mx5.kernel-linaro-lt-mx5 | 10:00 |
| ogra_ | http://annonaceae.buildd/~buildd/LiveCD/oneiric/ubuntu-mx5/current/livecd.ubuntu-mx5.kernel-mx5: | 10:01 |
| ogra_ | 2011-09-14 04:45:47 ERROR 404: Not Found. | 10:01 |
| ogra_ | hmpf | 10:01 |
| ogra_ | more hacks ahead | 10:01 |
| ogra_ | janimo, i assume we dont want to rename mx5 to linaro-lt-mx5 all over the place ? | 10:04 |
| janimo | no, mx5 should be fine and much less confusing | 10:05 |
| janimo | lt-linaro is just the designation of the kernel origin | 10:05 |
| ogra_ | right, live-build cant handle cases where the subarch name isnt identical to the kernel name suffix | 10:06 |
| ogra_ | though that it assumes iso for ext3 is really weird | 10:07 |
| ogra_ | ah, k, the iso is a fallout of the missing kernel | 10:09 |
| ogra_ | hmm, i really fail to find the code in live-build that actually creates livecd.ubuntu-mx5.kernel-mx5 | 10:24 |
| ogra_ | janimo, i fear we need infinity ... i can stare at the code for another two hours to find out where to put a proper hack, but i guess he will be faster ... | 10:41 |
| janimo | indeed | 10:41 |
| ogra_ | and i dont really feel comfortable to mangle the LB_LINUX_FLAVOURS variable during the build since all arches use it | 10:42 |
| ogra_ | and i guess thats the wrong approach anyway | 10:42 |
| * ogra_ wonders if he could instead do a hack on the cdimage side | 10:43 | |
| ogra_ | janimo, i got a testbuild running with a hack in cdimage, lets see | 10:56 |
| twb | lilstevie: I'm going home now, but I have typed up what I've learnt up to about last sunday: http://cyber.com.au/~twb/doc/tf101.txt (source) tf101.html (rendered) | 11:11 |
| twb | Comments, fixes, etc. welcome. | 11:11 |
| lilstevie | twb: well I can tell you why the bootloader needs to be uploaded :) | 11:13 |
| twb | No honest, I'm going home. Email me or something. /me runs | 11:14 |
| lilstevie | heh | 11:14 |
| lilstevie | sure you are | 11:14 |
| lilstevie | there are some fixes I will write later | 11:15 |
| lilstevie | I kinda have a 1500 word essay due tomorrow which I only just started | 11:15 |
| travalas | i'm trying to get ubuntu working on my beagle board xM rev c, but nothing on the USB bus seems to be working. Somebody mentioned looking at USB_POWER_EN. But I haven't been able to track down much on that issue. Does anybody have any pointers? | 11:19 |
| * ogra_ runs another mx5 build | 11:20 | |
| ogra_ | and another one | 11:39 |
| lilstevie | lol | 11:42 |
| ogra_ | oho ! | 11:42 |
| ogra_ | that one looks good | 11:43 |
| ogra_ | janimo, i think i have something for you in a minute | 11:46 |
| ogra_ | it created partitions etc, now it is compressing | 11:46 |
| ogra_ | hmm, though it again uses a 1.5G file ... where does that come from | 11:46 |
| janimo | ogra_, that is the standard new DVD iso size for Ubuntu right? | 11:47 |
| ogra_ | might be | 11:48 |
| ogra_ | hmm, but thats not a debian-cd issue | 11:49 |
| ogra_ | the live builder actually generated an 1.5G ext3 | 11:49 |
| lilstevie | an installer for arm that can be put on an sdcard or usb stick would be awesome | 11:52 |
| ogra_ | lilstevie, thats how all our images work | 11:52 |
| lilstevie | I could make a blob for the start of the mmc that would solve the need to use nvflash :p | 11:53 |
| ogra_ | what bothers me is that it is still convinced it builds a CD | 11:53 |
| ogra_ | even though it isnt doing that | 11:53 |
| lilstevie | ah heh | 11:53 |
| * ogra_ will wait for infinity ... that is all odd | 12:28 | |
| === zyga is now known as zyga-food | ||
| ppisati | NCommander: weren't you preparing a kernel patch for nic/usb? | 13:40 |
| === zyga-food is now known as zyga | ||
| ogra_ | hmm, oss4 has a weird build failure | 14:42 |
| ogra_ | complaining about an unused variable (which triggers Werror) but the variable is actually used | 14:42 |
| ogra_ | hmm | 14:43 |
| * ogra_ doesnt get it | 14:43 | |
| ogra_ | ossmixd.c: In function 'update_values': | 14:44 |
| ogra_ | ossmixd.c:165:7: error: variable 'prev_value' set but not used [-Werror=unused-but-set-variable] | 14:44 |
| ogra_ | cc1: all warnings being treated as errors | 14:44 |
| ogra_ | ... | 14:44 |
| ogra_ | but ... | 14:44 |
| ogra_ | int value, prev_value; | 14:44 |
| ogra_ | .... | 14:44 |
| ogra_ | prev_value = mixc_get_value (mixernum, i); | 14:44 |
| ogra_ | ... | 14:44 |
| ogra_ | i dont get why that would spill a warning at all | 14:45 |
| GrueMaster | ogra_: The netinstall for omap is no longer pulling x-loader. We will need it as it is still a separate package from u-boot. | 14:48 |
| ogra_ | hmm, i didnt change it | 14:49 |
| ogra_ | i think | 14:49 |
| ogra_ | didnt NCommander upload a d-i change for that recently ? | 14:49 |
| * ogra_ checks | 14:49 | |
| GrueMaster | Didn't we take it out of the seed? Or is this a netinstall issue only? | 14:49 |
| GrueMaster | He updated flash-kernel for omap. | 14:49 |
| ogra_ | i didnt touch any omap code at all | 14:50 |
| ogra_ | only omap4 | 14:50 |
| GrueMaster | Ok, so it is the flash-kernel for d-i that needs fixing? | 14:51 |
| ogra_ | and i have no idea how michael pulls x-loader, that should happen by flash-kernel-installer usually | 14:51 |
| GrueMaster | I'll pounce on him when he gets up. | 14:52 |
| GrueMaster | He may have thought that with the x-loader being pulled in for panda that it was that way for all omap. | 14:52 |
| ogra_ | yeah, he was on vac. when it happened | 14:53 |
| diwic | ogra_, why do you try to compile oss4? | 14:53 |
| GrueMaster | He just updated it Monday. | 14:53 |
| ogra_ | diwic, i try to make it not ftbfs :) | 14:53 |
| ogra_ | diwic, it looks like it is right that 'prev_value' isnt used further, but it is definitely getting a value assigned once | 14:54 |
| ogra_ | i wonder if i could just drop that var | 14:54 |
| diwic | ogra_, I guess you could, but is oss4 really relevant for arm? Better just mark it as "don't even try"? | 14:55 |
| ogra_ | diwic, not an option :) | 14:56 |
| ogra_ | (see cjwatsons mail to -devel) | 14:56 |
| ogra_ | what makes me really wonder is why it doesnt ftbfs on all arches with that error | 14:56 |
| diwic | ogra_, ok will look later (will have to go to meeting now) | 14:56 |
| ogra_ | no hurry | 14:57 |
| ogra_ | (i didnt even mean to summon you :), but if you want to take it ... ) | 14:57 |
| MMlosh | Hi! I am having issues with "vdr" multimedia server.. it locks up my dvbt tuner on pandaboard.. on x86 it behaves fine (natty) | 15:20 |
| MMlosh | Any hints what to try? It locks up some time after I stop recording/streaming | 15:20 |
| MMlosh | http://fpaste.org/4E4X/ is the dmesg.. I repluggged the tuner ~2 times and restarted vdr during the logged time | 15:21 |
| ogra_ | looks like a driver issue ... | 15:31 |
| ogra_ | file a bug i'd say :) | 15:31 |
| ogra_ | GrueMaster, so looking at NCommander's f-k changes, he doesnt seem to touch x-loader stuff at all | 15:35 |
| GrueMaster | The x-loader package isn't installed at all. The f-k part fails when making the system bootable due to missing MLO. | 15:36 |
| GrueMaster | That is why I thought it might be a seed issue. | 15:36 |
| ogra_ | right, but i see no code changes touchcing anything x-loader related | 15:37 |
| ogra_ | might | 15:37 |
| ogra_ | iirc we seed it in the installer seed | 15:37 |
| ogra_ | ogra@osiris:~/Devel/seeds/platform.oneiric$ grep x-loader * | 15:38 |
| ogra_ | supported-hardware-common: * x-loader-omap3-beagle [armel] # omap3 first stage bootloader | 15:38 |
| ogra_ | supported-hardware-common: * x-loader-omap4-panda [armel] # omap4 first stage bootloader | 15:38 |
| ogra_ | yup, we do | 15:38 |
| ogra_ | but i think thats only for main, that seed isnt used anywhere else | 15:39 |
| GrueMaster | Well, not sure what to look for. The x-loader wasn't installed on this system after running netinstall. I had to go in and manually add it. | 15:39 |
| ogra_ | right, i'm still digging | 15:40 |
| ogra_ | are you sure it was ever installed in these images ? | 15:40 |
| GrueMaster | it had to be. We had working netinstall on Maverick (although unofficially). | 15:41 |
| ogra_ | i'm talking about this cycle :) | 15:41 |
| ogra_ | NCommander completely rewriote what i did in lucid/maverick | 15:42 |
| GrueMaster | This cycle it hasn't worked for other reasons. | 15:42 |
| ogra_ | right, so we dont know if the new code ever worked | 15:43 |
| GrueMaster | I'll ping NCommanderwhen he gets up. | 15:44 |
| ogra_ | yeah, to me it looks like that never worked | 15:45 |
| ogra_ | at least there were no recent changes that could break it | 15:46 |
| utlemming | Is there a kind soul who might be able to help me with the Beagle board under QEMU emulation? I keep getting "qemu: fatal: Trying to execute code outside RAM or ROM at 0x40304350" when attempting to load the Oneiric OMAP4 kernel | 16:02 |
| MMlosh | ogra_, sry.. I was away.. file bug agains what? everything is OK when I use mplayer.. everything is OK when using VDR on x86 | 16:03 |
| ogra_ | well, thses are definitely kernel messages | 16:04 |
| ogra_ | if a userspace app triggers such things you should file a bug against the kernel | 16:04 |
| MMlosh | oh.. thinking that way around.. that makes sense.. ok | 16:04 |
| MMlosh | ogra_, on launchpad I guess? | 16:04 |
| ogra_ | yep | 16:05 |
| MMlosh | (cause kernel bugzilla is down anyway) | 16:05 |
| ogra_ | or just call ubuntu-bug on the panda | 16:05 |
| ogra_ | it shoudl wlak you through | 16:05 |
| ogra_ | *walk | 16:05 |
| MMlosh | that will need launchpad account anyway.. right? | 16:05 |
| ogra_ | yes | 16:05 |
| MMlosh | it would be easier from here.. thanks for help.. I hope it's something easier to fix.. | 16:06 |
| MMlosh | ogra_, do you think booting vanilla kernel 3.0.0. and testing with that would help? | 16:06 |
| ogra_ | MMlosh, where would you get such a kernel ? | 16:08 |
| ogra_ | do you have one for omap4 around ? | 16:08 |
| MMlosh | ogra_, yes.. I have that ready to go | 16:09 |
| ogra_ | well, try it, then you can tell in the bug that its working in vanilla oamp4 | 16:09 |
| MMlosh | not completely vanilla.. it has some minimal patches according to the wiki.. | 16:09 |
| MMlosh | ah.. crap.. I think it lacks dvb support | 16:09 |
| ogra_ | funny though, i wouldnt think that works without all the TI patches | 16:09 |
| GrueMaster | utlemming: The omap4 kernel is not the beagleboard kernel. That is for the pandaboard. You want an omap kernel. | 16:11 |
| MMlosh | ogra_, yes.. but I started with the omap4 defconfig from the wiki | 16:11 |
| MMlosh | GrueMaster, this is on panda | 16:11 |
| GrueMaster | MMlosh: I was referring to utlemming's post on using the omap4 kernel in quemu emulating a beagleboard (before your post). | 16:12 |
| ogra_ | MMlosh, well, our kernel carries like 1700 patches from TI to make panda work in all aspects | 16:12 |
| utlemming | GrueMaster: I just double-checked, I'm install linux-image-omap | 16:12 |
| MMlosh | I used the 3.0.0 image to get the AP support... it worked fine | 16:13 |
| MMlosh | ogra_, I'll get most up to date kernel then and compile.. I hope I get the config right, so the tuner works.. but first the basic report.. and finding out my launchpad password | 16:15 |
| ogra_ | which kernel are you currently running btw ? | 16:15 |
| ogra_ | we have a 3.0 omap4 kernel in oneirirc | 16:15 |
| MMlosh | ogra_, the default one in natty | 16:18 |
| MMlosh | 2.6.38-1208-omap4 | 16:18 |
| MMlosh | hmm.. that's sure worth trying.. | 16:19 |
| utlemming | the Oneiric linux-image-omap is for OMAP3 devices | 16:19 |
| ogra_ | utlemming, yes | 16:19 |
| utlemming | ogra_: that is the one that I am using that is failing in qemu | 16:19 |
| ogra_ | utlemming, with what bootloader setup do you use it ? | 16:20 |
| utlemming | u-boot and MLO from the Natty Netbook images | 16:21 |
| ogra_ | and you have a vfat you point qemu to | 16:21 |
| ogra_ | ? | 16:21 |
| ogra_ | carrying all these bits | 16:21 |
| utlemming | yeah, on a vfat | 16:21 |
| ogra_ | weird, that should work | 16:22 |
| MMlosh | ogra_, he has a point - can I keep mlo and uboot from natty, or I have to upgrade for that 3.0 kernel? | 16:22 |
| ogra_ | should work | 16:22 |
| MMlosh | ok | 16:23 |
| utlemming | Oh...wait a minute...I'm using the OMAP4 MLO and uboot | 16:24 |
| utlemming | I'll try the OMAP3 ones | 16:24 |
| * utlemming feels like an idiot for using the wrong MLO and u-boot | 16:29 | |
| === davidm` is now known as davidm | ||
| === davidm is now known as Guest56598 | ||
| === NekoXP is now known as Neko | ||
| MMlosh | oh.. the bluish color of the boot messages is gone.. it's pure gray with 3.0.0.. the dvb tuner works.. let's see if it locks up when I stop using it | 17:31 |
| MMlosh | and the minor issue with fluxbox is gone (it used to paint default "Workspace 1" instead of my configured name at the beginning) | 17:35 |
| MMlosh | taking my preference for 3.0 back.. Xv does not work.. maybe I need X11 update | 17:42 |
| NCommander | ogra_: GrueMaster: I'm alive. I didn't touch the x-loader code in F-K, the onmly thing I did was make sure the proper packages get instlaled in f-k-i on omap3 | 17:52 |
| GrueMaster | Well, missed one. :P | 17:52 |
| NCommander | ? | 17:52 |
| GrueMaster | x-loader is not installed. | 17:53 |
| ogra_ | there is no x-loader on omap | 17:53 |
| NCommander | great | 17:53 |
| ogra_ | (it only moved into u-boot on panda) | 17:53 |
| NCommander | am I just installing the wrong package? | 17:53 |
| NCommander | ogra_: *facepalm* | 17:53 |
| ogra_ | no, we arent ending up with any MLO | 17:53 |
| ogra_ | omap3 still needs the old way | 17:54 |
| NCommander | lovely | 17:54 |
| NCommander | I'll smack it with a stick today | 17:54 |
| ogra_ | well, up to now the omap netinst wasnt usable anyway ... and nobody complained | 17:55 |
| * ogra_ wouldnt cry if it wouldnt get ready to be honest | 17:55 | |
| NCommander | ogra_: english parse fail | 17:56 |
| ogra_ | really ? | 17:57 |
| NCommander | that sentence didn't make sense to me | 17:57 |
| ogra_ | hmm, my grammar is a bit weird today, agreed | 17:57 |
| NCommander | ogra_: anyway, I'm going to resolve my nictine fix so I'll bbiab | 17:58 |
| ogra_ | NCommander, we havent had any working netinst omap3 images yet and nobody complained ... so it doesnt seem like anyone misses it ... and i wouldnt miss it too if you wouldnt manage | 17:58 |
| ogra_ | s/too/either/ | 17:58 |
| * ogra_ hopes thats more understandable :) | 17:58 | |
| MMlosh | ogra_, the -omap4 kernel from oneiric works so far... the tuner's "channel lock" LED sometimes gets off for a second, but always comes back on, meaning the tuner is working | 18:13 |
| MMlosh | too bad DPMS and Xv do not work... maybe I need to update X11 from oneiric too | 18:14 |
| MMlosh | Is the issue still worth filling on launchpad? I guess that noone will bother fixing that for a <30 days until replacement release | 18:17 |
| === Jack87|Away is now known as Jack87 | ||
| kblin | hi folks | 20:13 |
| kblin | I'm a bit puzzled. I was under the impression that armel was a supported platform for natty. however, it seems there's binary packages that are only available for x86 platforms | 20:14 |
| utlemming | I'm having a bit of trouble getting text within QEMU....I'm using as my u-boot boot.scr parameters "setenv bootargs vram=1M mem=511M console=ttyS2,115200n8 serialtty=ttyS2 root=LABEL=cloudimg-rootfs fixrtc ro". All I see is "Starting kernel ...". Does anyone have any idea what I'm doing wrong here? | 20:14 |
| utlemming | MMlosh: increasing it 2M seems to make things a bit happier, but not much | 20:24 |
| === Jack87 is now known as Jack87|Away | ||
| bnofreak | hi .. i have some problems installing the prebuilt ubuntu binaries on my Pandaboard (revision A2) board .. i believe that i have followed the instructions in the "Getting Started" guide , and im trying to install Natty .. but i can't boot .. the boot sequence does not get longer than "Uncompressing Linux... done, booting the kernel." .. | 21:25 |
| bnofreak | <bnofreak> After that, the two leds next to the sd slot are flashing for some minutes .. and then nothing further happens | 21:25 |
| bnofreak | the image that i've copied to the sd card is ' ubuntu-11.04-preinstalled-netbook-armel+omap4.img ' | 21:25 |
| bnofreak | :) please help | 21:26 |
| === Jack87|Away is now known as Jack87 | ||
| === Jack87 is now known as Jack87|Away | ||
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!