[00:01] <ven1ce_> hello i installed a new kubuntu 11.10. now i'm facing really long boot times
[00:02] <ven1ce_> dmesg output is http://pastebin.com/KpasWmSd
[00:03] <ven1ce_> i'm kinda stuck. the #kubuntu guys refered me here :/
[00:05] <ven1ce_> http://imageshack.us/photo/my-images/24/unicornoneiric201110233.png/ is the corresponding boot chart
[00:09] <ven1ce_> cd #kubuntu
[00:09] <ven1ce_> ups :P
[00:09] <ven1ce_> ^^
[00:09] <uvirtbot> ven1ce_: Error: "^" is not a valid command.
[00:09] <ven1ce_> a bit late ^^
[00:56] <rnigam> Hi I have Ubuntu 11.10 and I recently isntalled intel compilers on it and tried to run a simple hello world program using icc hello.c and I ended up getting the following error: /usr/include/features.h(323): catastrophic error: could not open source file "bits/predefs.h"    #include <bits/predefs.h>       Can any one tell me how I can fix this error? Is there a package I am missing?  Thanks
[01:07] <RoyK> rnigam: I guess that might be a problem with icc, not ubuntu
[01:10] <rnigam> Royk: Thanks. Do you know of any channel where tht question can be answered ?
[01:14] <RoyK> no
[01:14] <RoyK> I guess the intel IPP guys may know
[01:14] <rnigam> IPP?
[01:15] <RoyK> rnigam: try with gcc, if it works there, ubuntu should be good
[01:15] <RoyK> ICC, sorry
[01:16] <patdk-lap> maybe the kernel headers aren't installed?
[01:18] <rnigam> patdk-lap: I installed the icc statically on another server and then copied over the installation binaries ! Are you suggesting I need to recompile intel compiler again on this server?
[01:19] <rnigam> and yes the program works fine with gcc
[01:20] <RoyK> rnigam: I wouldn't recommend using non-LTS releases for production
[01:23] <rnigam> RoyK: it is an experimental set up.
[01:28] <patdk-lap> hmm, if gcc works, then it's just probably icc not having the right default paths for it's include files
[01:32] <rnigam> patdk-lap and RoyK : Here's an interesting thing... I just isntalled apt-get install ia32-libs and recompiled and now I get a run tme error saying "hello.c(2): warning #1079: return type of function "main" must be "int"
[01:32] <rnigam>   void main()"
[01:33] <rnigam> and the program is #include<stdio.h> void main(){ printf("HelloWorld"); }
[01:34] <rnigam> i changed the return type to int and it works fine ! Can you guys help me out in understanding what is going on here ?
[01:45] <rnigam> nevermind. My bad. For some reason, Intel compilers assume the return type of main function to be int by default and they throw a warning if it is anything else. It is not a error !
[02:29] <amero> hello
[02:30] <amero> what is the default root's password
[02:30] <amero> that setup set when installing ubuntu server
[02:40] <RoyK> amero: there isn't a default root password
[02:40] <RoyK> amero: login as an admin user and sdo
[02:40] <RoyK> amero: login as an admin user and sudo
=== micahg_ is now known as micahg
[03:16] <amero> ah i see
[03:18]  * RoyK is not
[03:22] <amero> hehe
[03:25] <amero> how do you enable the boot message logging?
[03:26] <amero> i enabled the bootlogd but i dont see any log in /var/log/boot
[03:26] <uvirtbot> New bug: #880172 in postfix (main) "package postfix 2.7.0-1ubuntu0.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 75" [Undecided,New] https://launchpad.net/bugs/880172
[05:14] <RudyValencia> Can Ubuntu Server be an Active Directory server?
[05:14] <qman__> short answer, no
[05:16] <qman__> it's possible to do some of the things active directory does, at varying degrees of compatibility
[05:16] <qman__> it's involved, to say the least
[05:18] <RudyValencia> I probably should set up a Windows Server box as a DC and then use Ubuntu in a VM for whichever tasks need it then
[05:37] <jmichaelx> installing 11.10, got to network config step, said it was succesful. screen then was purple, and has remained that way for 10 minutes now. is it likely the installation has died?
[05:44] <qman__> if by purple you mean blue, then probably
[05:44] <qman__> otherwise, hardware failure is more likely
[05:45] <jmichaelx> qman__: i don't think anyone would call it blue.... nor do i think there is a hardware failure
[05:45] <jmichaelx> i am trying to see if a list of known issues with the installer exists
[05:46] <qman__> the non-GUI installer used with server and alternate uses #0000FF blue as the background
[05:47] <jmichaelx> qman__: sure looks purple to me, whenever i have used it
[05:48] <qman__> the GUI, desktop version uses bona fide purple, though
[05:48] <qman__> at least in recent versions
[05:48] <jmichaelx> qman__: this was a text installer... does the server image even include a GUI installer?
[05:48] <qman__> no
[05:49] <jmichaelx> yea.... it is definitely purple. who knows why.
[05:49] <jmichaelx> the installation failed. i will start over, but i have a hunch this will happen again
[05:50] <qman__> hmm
[05:50] <jmichaelx> it had been running natty, but i just finished replacing the drives, and intended to do a fresh oneiric install
[05:50] <qman__> it may have changed, I haven't installed 11.10 from disc
[05:50] <jmichaelx> yea
[05:51] <jmichaelx> i am installing with USB, but am of course user a disk iso
[05:51] <qman__> I think it does time zone after network
[05:52] <qman__> so it may be searching for network time or something
[05:52] <qman__> try setting up with no network configured
[05:52] <jmichaelx> could be that the new drives are the issue. they are sata 3, but as far as i knew, sata 3 drives can generally be used with sata 2 controllers
[05:52] <jmichaelx> qman__: i may try that, ty
[05:53] <qman__> depends on the drives, may need a jumper set
[05:53] <qman__> I recall some SATA 2 drives needing a jumper for SATA 1
[05:53] <jmichaelx> qman__: ok, that may well be the issue. i'll have to check on that... though i may wait until tomorrow
[05:53] <jmichaelx> yea, that was the case... and may well be the case with these
[05:57] <jmichaelx> many thanks fr the help, good night!
[06:33] <Halitus87> Hi all, I am having some mdadm issues. The array size seams very small in df. I have 3x2Tb drives in a raid 5 configuration. But it seams to see each drive as 250Gb any ideas?
=== mistymoo is now known as mrmist
=== mrmist is now known as mist2
=== mist2 is now known as mrmist
=== almaisan-away is now known as al-maisan
=== al-maisan is now known as almaisan-away
=== Homer is now known as Guest54999
[09:45] <Guest54999>  Can someone help me with apache2, I tried lamp from TASKSEL and apt-get install lamp-server^ and both times I get apache2: Syntax error on line 230 of /etc/apache2/apache2.conf: Could not open configuration file /etc/apache2/sites-enabled/000-default: No such file or directory Action 'start' failed. --------------------- this is on a fresh 11.10 install
[09:52] <venice__> hi i'm experiencing unreasonably long boot times on a fresh install of 11.10, corresponding dmesg is http://pastebin.com/g0kdi5kB and a typical  boot chart is http://imageshack.us/photo/my-images/52/unicornoneiric201110231.png/ , any ideas would be helpful. 120 seconds or more certainly  seem out of place since the system used to boot in about 45 seconds with 11.04 or the versions before it. :)
[10:18] <g0tcha> hey guys, im planning to move ubuntu server 10 to a new server hardware, i want to do a fresh install of ubuntu server 11 on it. how can i copy over the users of the old isntall to the new install?
=== Guest54999 is now known as Duvrazh
[11:46] <Duvrazh> Question about Apache2 configuration and FQDN, I want my server to respond to all requests sent to home.mydomain.net, which is a forward to DYNDNS that is updated by my router. Would the correct setting be to have apache respond to all requests?
[11:46] <Duvrazh> server's hostname is not a FQDN
[11:46] <Duvrazh> although it could be but I'm not sure if I need it to be
=== JMCG is now known as jMCg
[12:43] <Dingdong> how come my entries I add to resolv.conf arent persistent over reboots
[12:48] <Dingdong> I dont have any network connections showing up in the network manager - I installed ubuntu server 11.10 and then lubuntu ontop
[12:49] <lenios_> Dingdong, do you have dhcp defined on any interface?
[12:49] <Dingdong> I cant connect via putty on win7 machine tho so network is functionl
[12:49] <lenios_> in /etc/network/interfaces
[12:50] <Dingdong> no, it s configured as static
[12:50] <Dingdong> I CAN connect via putty :P
[12:50] <lenios_> i mean, dhcp can override this file
[12:51] <Dingdong> yes, but interfaces doesnt hold any dhcp entries at all, I clead that out and set it to use static
[12:53] <patdk-lap> dingdong, any number of things can rewrite resolv.conf
[12:53] <patdk-lap> such as vpn programs
[12:53] <patdk-lap> I normally just uninstall resolvconf, to make it so nothing edits it
[13:09] <bennym> I need a package that willl allow an ubuntu server machine to gather the system loads/RAM usage/other stats from itself and other ubuntu server machines and graph them and display them as a webpage. Does such a thing exist, or should I get hacking?
[13:11] <uvirtbot> New bug: #880339 in mysql-5.1 (main) "AppArmor profile needs update" [Undecided,New] https://launchpad.net/bugs/880339
=== med_out is now known as medberry
=== medberry is now known as med_out
[15:36] <qman__> bennym, nagios / icinga
[15:36] <bennym> They look like the sorta thing I'm looking for. Thanks!
[15:40] <RoyK> bennym: rather use munin
[15:41] <bennym> I'll check that out too then :L
[15:41] <RoyK> icinga is good for alerting when things don't work too well, munin is better with nice graphs
[15:42] <bennym> "A default installation provides a lot of graphs with almost no work." - Munin
[15:42] <bennym> EXCELLENT!
=== Jasonn is now known as Jasonn|NotHere
=== Jasonn|NotHere is now known as Jasonn
[16:09] <bennym> Approval of munin, exactly what I wanted!
[16:11] <RoyK> bennym: it creates nice graphs
[16:11] <bennym> That it does. It's a little empty thus far but it should turn out ok :L
[16:11]  * RoyK also uses hugin, but for other purposes :P
[16:13] <RoyK> norse mythology is somewhat funny, Odin the great leader has lost an eye, Tyr, the god of war, is singlehanded.. Tor is just stupid :P
[16:28] <bennym> RoyK, how do I stop munin showing the postfix graphs (which are just a waste of space)?
[16:44] <bennym> nevermind, it disappeared (a while after I  killed the plugin too)
[16:56] <RoyK> beerbroy: no idea
[18:21] <koolhead17> hi all
=== almaisan-away is now known as al-maisan
=== al-maisan is now known as almaisan-away
[19:12] <www2> can some one help me why i can not log in on my dovecot imap server? configs http://pastebin.com/dCxLUAXH
[19:16] <www2> can some one help me why i can not log in on my dovecot imap server? configs http://pastebin.com/dCxLUAXH
=== almaisan-away is now known as al-maisan
=== Fritz09_ is now known as Fritz09
[19:36] <uvirtbot> New bug: #880514 in postfix (main) "package postfix 2.8.5-2~build1 failed to install/upgrade: ErrorMessage: subprocess installed post-installation script returned error exit status 75" [Undecided,New] https://launchpad.net/bugs/880514
[19:41] <alaing> Hi I installed coldfusion on my ubuntu server edition machine but it doesn't seem to start when the server gets booted up can someone help me? I'm having to manually go into my coldfusion bin directory and run ./coldfusion start
=== al-maisan is now known as almaisan-away
[21:26] <wordp> hello I am new to ubuntu server administration. I have version 10.4.  I just installed the lamp server and wordpress. I get to see the wordpress install page. The problem I have is that I cannot see the pictures I have upload when I click to view a posts where I inserted an image. How can I make the images be displayed in a post? Thank you
[21:27] <lenios> wordp, your problem is related to wordpress, not ubuntu
[21:27] <lenios> try on #wordpress
[21:28] <wordp> thanks lenios, I will check #wordpress I tried here first because i thought it may have to do with file permissions
[21:28] <wordp> join #wordpress
=== Psi-Jack_ is now known as Psi-Jack
[23:52] <kaushal> Hi
[23:52] <kaushal> whats the syntax of route to be added permanently in /etc/network/interfaces file ?
[23:53] <kaushal> on 8.04 and 10.04