/srv/irclogs.ubuntu.com/2011/11/26/#kubuntu.txt

=== OffToHades is now known as BarkingFish
=== skreech_ is now known as Daskreech
_Tauro34_holaaa00:14
_Tauro34_alguien espanol ?00:14
bazhang!es | _Tauro34_00:14
ubottu_Tauro34_: En la mayoría de canales de Ubuntu se habla sólo en inglés. Si busca ayuda en español o charlar entra en el canal #ubuntu-es. Escribe "/join #ubuntu-es" (sin comillas) y dale a enter.00:14
Eggplantlets see if we can get to the bottoms of this package issue00:17
Eggplanthttp://imgur.com/cK93j00:20
Eggplantscreen shot of aptitude and its double package listing00:20
Eggplantthis laptop was a 100% clean install with 11.1000:22
ScottyKhello, how do I format an external 160 GB drive in Kubuntu?00:29
frantaScottyK: to what filesystem?00:29
ScottyKto something that both win7 and kubuntu can read00:30
frantaso probably ntfs (if you don't want to be limited by maximum filesize of 4GB)00:31
ScottyKFranta - ntfs will work!00:31
frantaso probably something like # sudo mkfs.ntfs /dev/sdxy00:31
genii-aroundYou might want to partition it first00:31
frantahe's asking only about formating :)00:32
genii-aroundTrue, strictly speaking00:32
ScottyKwould there be any advantages to partitioning it? I'm planning on dumping my MP3 collection to it00:32
frantaScottyK: first you have to have some patition(s) and then you can format them00:33
genii-aroundIf it's currently from the factory with no filesystem or so on, you'll probably want to make at least one big partition that is the entire disk00:33
ScottyKI've used it before, and curently has ntfs on it. just want to wipe it so it's fresh, instead of deleting 80Gb to the trash, then deleting it00:34
genii-aroundAlso, you append the partition number to devname you are formatting: sudo mkfs.ntfs /dev/sdd1       for example00:34
genii-aroundIf it already is setup, then the method described already00:34
genii-aroundDo you know what device name it is?00:35
frantathats why I wrote sdxy :)00:35
ScottyKcomes up at /dev/sdb100:36
ScottyKwas planning on buying a new 500GB drive this weekend, but saw how much prices have shot up, and decided to hold off00:37
frantaScottyK: ...floods ... :-/00:37
frantaso it will be mkfs.ntfs /dev/sdb100:38
frantabut you need to run it with sudo00:38
genii-aroundScottyK: So the: sudo mkfs.ntfs /dev/sdb1  is what you want. If you need a label on it then put -L volume-name in between there00:38
ScottyKyeah, read about that. drive I was looking at went from $59 to $169, I can wait for those prices!00:38
ScottyKgenii - example would be sudo mkfs.ntfs -L EXTERNAL /dev/sdb1?00:39
genii-aroundYup00:39
ScottyKcan I do -L on the drive already in the computer, so Dolphin won't display it as "102.7 GiB Hard Drive"?00:39
genii-aroundScottyK: When formatting a drive with mkfs.ntfs, yes. There are other ways to change what file managers, etc say the drive name is though00:41
ScottyKoops, yeah I didn't want to format the notebook drive, just change the volume name00:41
EggplantScottyK: yea hdd's have been going up due to some flooding00:42
genii-aroundScottyK: See https://help.ubuntu.com/community/RenameUSBDrive for how to change volume names on common filesystems00:42
genii-around( without necessarily having to format them.... )00:42
ScottyKgenii - thanks! external drive format in progress, and off to read up on changing volume names!!00:43
genii-aroundWell, time to head out. Have fun!00:44
szalif you had gone for gparted from the start, that'd have been a no-brainer..  volume labels created w/ gparted show even when connecting via USB00:44
=== cleaninstall is now known as phiscribe
natmanhello, is there anyway to shrink the window labels in the taskbar to display no text, just the program icon - like windows 701:00
ribeiroBoa noite galera01:51
=== ribeiro is now known as xMarCelLo
=== jared is now known as Guest97115
* debrisrat herkese selamlar hayırlı geceler02:06
szal!tr | debrisrat02:06
ubottudebrisrat: Turk ubuntu kullanıcıları, Türkçe yardım ya da geyik için /join #ubuntu-tr hizmetinizde.02:06
debrisratszal:  af edersiniz  yeni kurulum ubuntu oldugundan otomatik olarak girmişim :s02:07
szal*sigh*02:07
szalsome people just don't get pointers..02:08
Eggplantwell programming in C is hard ....02:08
szallol02:09
debrisratszal:  sorry for everythings  i did new installation my ubuntu 11.10  this channel option was default i can't see join this channel ok ?02:09
szaldebrisrat: I don't blame you for not knowing that #ubuntu-tr exists, that's what the bot pointer is for..  but you could've noticed by yourself that this channel is English by reading the topic ;)02:11
debrisratok szal  thanks you !! see you again !02:13
debrisrat:)02:13
=== Guest97115 is now known as JaredW
Eggplantanyone able to help with what seams to be a package issue (i thi s a package list issue, but not sure)02:21
=== jay is now known as Guest83916
=== jared is now known as Guest41102
=== caesar__ is now known as caesar_
=== jared is now known as Guest67626
wayneI'm looking to install adobe flash for kubuntu where would I find this, the site doesn't seem to provide the right file.03:47
wayneon firefox03:47
SniggelsIs there any way to mount a NFS share and be able to write within Dolphin AND Eclipse with my username ?04:12
Sniggelsthe nfs share is rw and no_root_squash04:13
littlegirlHey there, I use Lucid Lynx and haven't been offered any updates in quite some time, so I suspect I've accidentally removed the widget that notifies me of them. I just looked and can't find it. Does anyone know its name?05:17
littlegirlAnybody?05:19
aamirhi05:56
noaXessmorning07:09
noaXesshow can i activate kate with code completion.. eg. for python.. if i write a command like switch, and kate does complete the function/statement?07:10
poyntzhi all07:37
poyntzis it possible to install oneiric without overriding grub?07:37
poyntzmy problem is: I have win7 and ubuntu installed - dual-boot, but when I upgraded kubuntu to oneiric, it stuffed up07:39
poyntz... my kubuntu07:40
poyntzso I could install off live CD, but then, if it overrides the current grub, I'd then have to reinstall windows 7?07:40
poyntzor no?07:40
=== fx is now known as Guest92443
anuvratI am using 10.10 as of now will firing sudo apt-get upgrade get me to kubuntu 11.10?08:22
frantaanuvrat: no, I think you'll have to upgrade to 11.04 first and then to 11.10 ... I would do it with KPackagekit...08:49
anuvratfranta: and is it safe to upgrade ? I mean things don't break on upgrading do they? had read some reviews in past which preferred fresh install to upgrades08:51
frantaanuvrat: that depends on your hardware and other things ...08:51
frantaI didn't have too many problems08:52
=== metelliu1 is now known as metellius
=== axel is now known as Guest70789
=== oyster is now known as healer
Martthi everybody12:15
CenbeMy minicli (alt-F2) is expanded to the entire width of the screen and won't resize even if I move it away from the edge. How can I resize it smaller?12:31
Timewarper I installed the nvidia driver and now all compositing effects are disabled12:32
Timewarperi want to blacklist nouveau cause i use nvidia. The best way to do that is to add a nouveau.modeset=0 kernel option at grub or use my_blacklist file?13:07
frantaTimewarper:  what about installing nvidia proprietary drivers from repository? That will do everything that's necessary...13:08
Timewarperfranta, tried it13:09
Timewarperi still need to blacklist nouveau13:09
phoenix_firebrdhello everyone13:17
phoenix_firebrdI loke to know if kubuntu 64 bit is as good as kubuntu 325 bit13:17
phoenix_firebrdI loke to know if kubuntu 64 bit is as good as kubuntu 32 bit13:17
phoenix_firebrd*like13:18
pofic:)13:19
poficyra Lietuviu13:19
pofic??13:19
rork!en | pofic13:20
ubottupofic: The #ubuntu, #kubuntu and #xubuntu channels are English only. For a complete list of channels in other languages, please visit https://wiki.ubuntu.com/IRC/ChannelList13:20
rorkpofic: Can you share which language you want help in so we can find the appropriate channel?13:21
=== chep04 is now known as themike101
themike101join #ubuntu13:22
TImewarperhow can i disable nvidia splash screen?13:24
tshreejanhello13:26
tshreejanhello13:26
rorkHi tshreejan13:26
=== frewo64 is now known as frewo
themike101hi people, i did somthing dum, i had partitiioned my external into 3 and i had an image on the first partition (size :4gb) i put it there using 'dd', and the other two had an ntfs and ext4 filesystems, i attempted to delete the first 4 gb filesytem with start up disk creator, but it lost the connection to the external and now the entire external seems to be empty, wiped clean completely, is there a way to recover the data on the other two partitions?13:33
TImewarperAny idea how can i change the clock from 12h to 24h?13:33
TImewarperAny idea how can i change the clock from 12h to 24h?13:38
rorkTImewarper: it's somewhere in System Settings > Locale13:40
perry_ciao ragazzi14:00
perry_e ragazze14:00
lucaHi! I'm trying to install a dhcp server but I'm having difficulties. How do I start/stop the service?14:09
larsivihi, I now have two laptops at kubuntu 11.10, and both have the same wireless issue - they don't look up the wireless key from kwallet, and neither asks me if I wish to store it there (again)14:38
larsiviusing the plasma network manager interface14:39
Peace-larsivi: try with a new user14:39
Peace-fresh installation ?14:39
Peace-no ppa?14:39
Peace-weird repository ? strange kde version ?14:39
Peace-larsivi: btw you have disable kwallet? http://wstaw.org/m/2011/11/26/plasma-desktopSy1340.jpg14:41
BluesKajHiyas all14:46
=== carlos is now known as Guest85819
larsiviPeace-: the wallet works in other apps fwiw15:49
larsiviI may try the new user approach15:49
lorena__ciao16:14
lorena__!list16:14
ubottuThis is not a file sharing channel (or network); be sure to read the channel topic. If you're looking for information about me, type « /msg ubottu !bot ». If you're looking for a channel, see « /msg ubottu !alis ».16:14
InadaptadoAfternoon16:24
InadaptadoDoes anybody know a workaround to help Kwallet asking for my password every single time I open the browser?16:24
InadaptadoI'm taking that as no16:29
guest32-093e-does anyone know a usb wireless adapter that will work out of the box with ubuntu that you can get at wal-mart or staples?16:35
=== guy is now known as Guest89810
SnooffyHi fellows, got a little sound problem.... Had a SB audigy 4 in the tower but it did not work properly with kubuntu, mainly 5.1 sound.. so i decided to take it out and use a onboard intel 5.1 card which works, however I'm getting no sound whatsoever in a polish adobeair app "iplalite" i guess i need to specify the "new" sound card for adobeair but have no idea how... anybody can help?16:57
Peace-adobe?16:58
Peace-Snooffy: alsamixer -V all16:58
Peace-that is what i know16:58
Peace-and maybe in the settings of the program16:58
SnooffyPeace-: the program has no setting :(16:59
Snooffywhat -V all? maximases all channels?16:59
Peace-no it actually shows every channel on your audio card16:59
Peace-so you can edit enable and disable it16:59
Peace-make sure you navigate completly the channels with right arrow17:00
Peace-to enable disable  type M17:00
guest32-093e-deos anyone know of a usb wireless adapter that will work out of the box that has wpa/wpa2 personal capabilities?17:01
guest32-093e-does*17:01
Peace-guest32-093e-: there is a database17:02
guest32-093e-i normaly use windows17:02
guest32-093e-i rarly use linux17:02
guest32-093e-sooo..17:02
Peace-guest32-093e-: https://help.ubuntu.com/community/WifiDocs/WirelessCardsSupported17:03
SnooffyPeace-:  i think i got it now :D17:03
guest32-093e-well not dont understand much on that page17:03
guest32-093e-well i dont understand much on that page*17:04
SnooffyI;ve created a week ago when strugling with my SB audigy file .asoundrc to configure all the channels, deleted it and it start to work again.. i hope my 5.1 in other apps will work as well,,#17:04
Peace-guest32-093e-: ok keep using windows17:04
guest32-093e-peace doent the linux community suppose to be understanding and open minded?17:05
Peace-guest32-093e-: yes17:05
Peace-i have given you a link17:05
Peace-if you can't undestand ... well it's your problem17:05
Peace-there is a list of supported card17:05
Peace-if you can't undestand i dunno.17:06
guest32-093e-do i have 5 hours to lookup all that information when i work 6 days a week?17:06
guest32-093e-no17:06
Peace-ok17:06
guest32-093e-i know linux is not for the average joe17:06
guest32-093e-peace if you dont know off the top of your head thats fine17:07
guest32-093e-i know you have a live also17:07
guest32-093e-life*17:07
guest32-093e-everything ive read points to using xp drivers17:08
Peace-i have my own atheros that works out of the box17:08
guest32-093e-atheros is a driver right?17:08
Peace-guest32-093e-: no it'a  brend17:09
guest32-093e-brand?17:09
Peace-*brand17:09
guest32-093e-all what i see at wal-mart and staples are linksys, belkin, and netgear17:09
guest32-093e-i want atleast a 300mps17:10
Peace- linux = read manual or buy a dell supported computer with ubuntu preinstalled17:11
guest32-093e-i have a old computer runing xubuntu on it17:11
Peace-guest32-093e-: i can't buy for you a wifi17:12
Peace-...17:12
Peace-you have to read and buy what it's fine17:12
guest32-093e-im planning on buying one myself17:12
guest32-093e-will a Belkin N300 Micro Wireless USB Adapter without having to use xp drivers?17:13
Peace-guest32-093e-: plugin on kubuntu , run konsole , type lsusb17:13
Peace-then search the id on the database17:13
guest32-093e-peace every time i read someone aboout linux the information typically comes for fourm and alot of the data contradicts17:14
guest32-093e-how do you find the id?17:14
Peace-guest32-093e-: plugin on kubuntu , run konsole , type lsusb17:14
Peace-guest32-093e-: plugin on kubuntu , run konsole , type lsusb17:14
Peace-guest32-093e-: plugin on kubuntu , run konsole , type lsusb17:14
Peace-guest32-093e-: http://linux-wless.passys.nl/query_alles.php?17:15
Peace-green works17:15
Peace-red doesn't17:15
guest32-093e-i dont have a usb wrieless yet17:15
Peace-:S17:15
Peace-guest32-093e-: https://help.ubuntu.com/community/WifiDocs/WirelessCardsSupported17:15
Peace-or you read17:15
Peace-or you don't do anything17:15
Peace-bye17:16
HrJohanzenTrying out kubuntu for the first time and must say im kinda struggeling17:16
hyper_chhowdy, is the Kubuntu Team working on getting 4.7.4 portet to oneiric in a PPA?17:17
HrJohanzenkinda want compiz to run on it17:17
guest32-093e-i dont think peace understand if he asked me for help building a barret 801 and i told him to look for information online about it17:17
Peace-hyper_ch: kde 4.7.3 is the last17:17
HrJohanzenany suggestions?17:17
nah_got few questions... where is xorg.conf in kubuntu 11.10?17:17
guest32-093e-peace would probably not get the job done17:18
=== juan_ is now known as RiotingPacifist
Peace-HrJohanzen: you don't need compiz17:18
hyper_chPeace-: the plasma bar crash is fixed in 4.7.4... I had like 20 plasma crashes yesterday :(17:18
=== RiotingPacifist is now known as RiotingPacifist2
Peace-hyper_ch: ? how did you installed kde ?17:18
HrJohanzenWhy?17:18
Peace-hyper_ch: i have kde 4.7.3 and it works fine here17:18
hyper_chPeace-: the kubuntu team ppa17:18
Peace-HrJohanzen: kde has his own effect17:19
Peace-HrJohanzen: systemsettings ==> desktop effect17:19
HrJohanzeni see17:19
hyper_chPeace-: https://bugs.kde.org/show_bug.cgi?id=27249517:19
ubottuKDE bug 272495 in general "Crash in TaskManager::TaskItem::task" [Crash,Resolved: fixed]17:19
Peace-hyper_ch: untill kde 4.7.4 is not released it will not come17:19
Peace-on ppa17:19
Peace-so...17:19
Peace-hyper_ch: try creating a new user17:20
hyper_chhmmm.... in the bug report they state it's fixed for 4.7.417:20
nah_and how to change resolution in kubuntu 11.10 without changing screen size?17:20
HrJohanzenPeace-: Thanks17:20
Peace- nah_ systemsettings17:21
Peace-nah_: http://wstaw.org/m/2011/11/26/plasma-desktopRJ9353.jpg17:21
Peace-hyper_ch: you could install kde-neon17:23
nah_Peace: every time i change resolution from 1680xsomething_i_forgot it change also my screen size- screen edge is not on edge of my lcd matrix17:23
Peace-hyper_ch: it's a kde version that is build very often17:23
hyper_ch(or compile from git directly)17:24
hyper_chPeace-: I'll just wait17:24
Peace-hyper_ch: there isa ppa for kde...17:24
Peace-you can choose at kdm to run kde normal or kde-neon17:24
Peace-hyper_ch: as you wish17:24
hyper_chPeace-: shouldn't be too long for 4.7.4 then if they mark in bug reports that it is fixed there17:25
Peace-hyper_ch: kde 4.7.4 wil be released on december17:25
Peace-as every months17:25
Peace-hyper_ch: anyway you could try this ppa , if then you get problem i am not responsable17:26
hyper_chevery months there a subversion released?17:26
Peace-every months there is a bug fix17:26
hyper_chI didn't notice :)17:26
Peace-so kde 4.7.3 november kde 4.7.4 december17:26
Peace-and so on..17:26
Peace-every year instead there is a major release...17:26
hyper_chdidn't know that :)17:26
Peace-so kde 4.7 ==> kde 4.817:26
Peace-hyper_ch:  like rooot  :>     add-apt-repository ppa:neon/ppa17:27
hyper_chno thx for neon17:27
Peace-ok17:27
hyper_chthx for the info17:28
hyper_chso, back to my diaspora server :)17:28
Peace-hyper_ch: are you from diaspora?17:28
hyper_chno, I just run a pod :)17:29
Peace-ah17:29
Peace-ok bye  i have to go17:29
hyper_chcya17:29
Jayjaderhello everybody!17:44
nah_how to change screen resolution without changing the screen size?18:00
EruaranDoes anybody know how to fix the panel clock so that it shows 12 hour time and not 24 hour time?18:07
EruaranI have installed Kubuntu 11.10 on several systems now and the same issue appears on every system.18:07
EruaranChanging the clock settings in local/date and time *does not* make any difference - if you remove the digital clock plasmoid and put it back or restart  - it continues to show 24 hour time no matter what.18:09
EagleScreenI dont know Eruaran18:09
nah_where is file that manage screen config in kubuntu 11.10?18:12
nah_it should be xorg.conf in /etc/X11 but there is nothing like this there so what file have screen config?18:14
EagleScreennah_: that file disappeared some releases ago, at least in open drivers18:15
EagleScreennah_: but you can create it yourself18:16
nah_ok, don't realy need this, i just need to change screen resolution, but it fails every time18:16
nah_changing resolution changes also screen size18:17
EagleScreennah_: what graphics card do you have?18:17
nah_gma 95018:18
EagleScreenintel?18:18
nah_yes18:18
TimewarperI try to get adobe flash 11 (apt for ubuntu) but it doesnt work and i get an error. http://get.adobe.com/flashplayer/ (Firefox doesn't know how to open this address, because the protocol (apt) isn't associated with any program.)18:18
EagleScreenTimewarper: using kubuntu? what version?18:19
Timewarper10.1018:19
EagleScreennah_: there is only one kind of drivers for it: free drivers, in package xserver-xorg-video-intel18:19
EagleScreenTimewarper: check if you have available a package called "apturl-kde"18:20
TimewarperEagleScreen, i have installed that18:20
Timewarperalready18:20
Timewarperfirefox still doesnt know what program to use18:21
nah_EagleScreen: drivers are instaled by default, every desktop effect turned on by default is working smoothly without slide show, and from what i know intel card are suported out of the box18:21
TimewarperEagleScreen, so how do i use apturl18:22
EagleScreenTimewarper: apturl should prove firefox the info to handle apt:// protocol, but in you kubuntu version this may be used by another browser: Konqueror? Rekonq? Arora?18:24
TimewarperEagleScreen, so i will try with konqueror18:25
Timewarperand see18:25
EagleScreenTimewarper: try with the default browser which was pre-installed in kubuntu18:25
Timewarperkonqueror18:25
TimewarperEagleScreen, also a funny thing18:26
Timewarperi got every time when i log in18:26
Timewarperkmix popping on the screen18:27
Timewarperwhats with that?18:27
EagleScreenI dont know, stranger18:29
EagleScreendid apturl work in Konqueror?18:30
anathema_hi guys18:35
anathema_It have just stopped working my sound in kubuntu 11.1018:35
anathema_all the settings I think that are ok18:35
anathema_and in windows (dualboot) the sound works18:35
Girly-GirlAh another sound problem18:36
anathema_:S18:36
anathema_who else has the same prob?18:36
Girly-Girle18:36
Girly-Girlanathema_: I just cam so I don't know the problem18:36
Girly-Girlcame18:36
anathema_it just stopped working :S18:37
Girly-Girlanathema_: But many users on the channles reported problems18:37
anathema_so weird18:37
anathema_hmmm18:37
anathema_I didnt updated something18:37
anathema_in alsamixer all are up except : S/PDIF18:37
anathema_that can't be increased18:38
anathema_anyone who can help me?18:38
Girly-Girlanathema_: try "sudo apt-get purge pulseaudio alsa-base" then reboot and "sudo apt-get install pulseaudio alsa-base"18:38
anathema_ok trying now thanks18:39
EagleScreenanathema_: the only idea i have is that you could test with another backend for phonon. do first the Girly-Girl tip18:39
anathema_ok but the weird is that suddendly stopped18:39
anathema_:P18:40
anathema_rebootng18:40
anathema_Girly-Girl, no luck18:43
criolituna folla18:44
anathema_Girly-Girl, In the phonon settings previously (that worked) I didnt had any pulseaudio settings18:44
anathema_now I have18:44
anathema_Pulse Audio Server18:44
anathema_before was something for soundblaster audio18:45
Girly-Girlanathema_: Install pavucontrol and run it18:45
anathema_I have 2 cards one onboard and one ext sound blaster. kubuntu by default18:45
anathema_detected the ext and was gr8. OK installing and runing now Girly-Girl18:45
Girly-Girlanathema_: Also recheck alsamixer to make sure nothing is mute18:45
anathema_only s/pdif is down18:46
anathema_pavucontrol shows a window18:46
anathema_that all ok18:46
Girly-Girlanathema_: Just check that settings are right there18:47
anathema_the window is corrupted18:47
anathema_the design of the window and the buttons :S18:47
anathema_of pavucontrol18:47
Girly-Girlanathema_: Its gtk18:47
anathema_Girly-Girl, ok the settings seems to be ok. Not muted18:47
anathema_but not sound :S18:47
anathema_is there a way to revert to setup defaults18:48
anathema_I want to remove pulseaudio18:48
anathema_and to revert back to defaults18:48
Girly-Girlanathema_: Does the test button in KDE System settings Multimedia give a not working notification?18:48
Girly-Girlanathema_: Normally pulseaudio is inclided by default unless you removed it18:49
Girly-Girlanathema_: You can to "sudo apt-get remove pulseaudio" and reboot18:49
anathema_Test cannot presse18:49
anathema_be pressed. It's "hidden"18:49
anathema_Sorry selected Pulseaudio server and pressed Test and no sound18:50
Girly-Girlanathema_: Did you ever get a notification saying "sound device removed should KDE forget about it"18:50
anathema_Only in startup18:50
anathema_when I removed and before installed again18:50
anathema_weird18:50
anathema_In hardware: There is no Sound CARD1!!!!18:51
anathema_(Audio Hardware Setup) in Phonon Settings18:51
Girly-Girlexactly what was the last appilcation install or removal done?18:51
anathema_Nothing18:51
anathema_In this week nothing18:51
anathema_I just checked history18:52
Girly-Girlanathema_: What output does this give "cat /proc/asound/cards"18:52
anathema_ 0 [CA0106         ]: CA0106 - CA010618:52
anathema_                      Audigy SE [SB0570] at 0x9000 irq 1918:52
anathema_This is my ext card that worked18:52
Girly-Girlanathema_: try "aplay /usr/share/sounds/alsa/Front_Center.wav"18:53
anathema_no sound :S18:53
anathema_How to show up the window about kde forget18:54
anathema_I think that I chosed NOT to forget18:54
anathema_Also in lspci: 02:01.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster18:54
Girly-Girlanathema_:Hmm I think you should have chosen forget18:55
anathema_If I reboot18:55
anathema_it will show up?18:55
spartan779Hallo people18:55
anathema_Hmm or is there a way to change this option?18:55
Girly-Girlanathema_: If you remove alsa-base and pulseaudio then reboot it should18:55
anathema_ok18:55
anathema_aand to choose18:56
anathema_Not to forget18:56
anathema_And after that?18:56
anathema_Is there any other option that I must do after the "Not to forget"?18:56
Girly-Girlanathema_: Try this http://www.ubuntugeek.com/fix-for-no-sound-sound-blaster-audigy-after-upgrading-from-ubuntu-9-04-to-9-10.html18:58
anathema_it will be a conflict with GNOME alsa mixer?18:58
anathema_because I use kde18:58
Girly-Girlanathema_: You can do the same with kmix19:00
anathema_ok trying now after the reboot19:00
anathema_i still have the sound prob19:17
CrellHi folks.  I'm trying to find information about ssh-agent so that I don't have to keep retyping my key passcode every time it starts a connection.  Everything I find googling, though, is basically just "well use ssh-agent", which is not helpful.19:24
Ripp__I have a bunch of windows which somehow are hidden and unavailable to me.19:25
CrellAny hints on how to enable that fully?  As in, not just for a single sub-shell, but system wide and in the GUI (so that Dolphin doesn't ask me for a passcode 3 times every time I open a folder...)19:25
Ripp__I know they exist because when i restart, the restart freezes and shows me them breifly before it quits.19:25
Ripp__How the heck do I get them back?19:25
Ripp__alt+tab doesnt work..19:25
CrellRipp__: are the on another desktop, maybe?19:26
Ripp__I checked both desktop 1 and 219:26
Ripp__unless there are others that I'm not aware of19:26
CrellIt's configurable how many there are, but if you have the desktop selector plasmoid it should show all of them.19:26
CrellWhat windows are they?19:26
Ripp__Okular19:27
Ripp__dolphin19:27
Ripp__Another instance of chrome, it appears19:27
CrellYou could try force killing them on the command line, perhaps.19:27
Ripp__man so wierd19:30
Ripp__well somehow i was able to switch using google's taskbar manager19:30
Ripp__i don't get it lol19:30
CrellOddsfish.19:30
CrellKnow anything about ssh-agent? :-)19:30
Ripp__brb19:31
frankhi guys, how can i change the symbols on the bottom right (like clock) ?19:32
frankknow anybody how can i search and find "all" without Search and Launch ?19:40
Timewarperhey19:41
Timewarpercan someone tell me how to fix apturl in firefox?19:41
Timewarperwhen i try to open an apt link in firefox i get an error.19:42
pchpHola19:44
red_Hello there19:46
holgerson#anonymous19:46
BluesKaj!apturl | Timewarper19:54
red_I had 11.10 but I went back to Lynx because the package system on Oneiric wouldn't let me have VLC and znes at the same time.. plus I couldn't get snes9x, which is available on lynx19:56
BluesKaj> AptUrl is a simple graphical application that takes an URL (which follows the apt-protocol) as a command line option, parses it and carries out the operations that the URL describes (that is, it asks the user if he wants the indicated packages to be installed and if the answer is positive does so for him).19:56
BluesKajTimewarper, ^19:57
=== carlos is now known as Guest44709
red_what is that?19:59
=== red_ is now known as RedAshes
TimewarperBluesKaj, i really cant use apturl with firefox in kubuntu19:59
Timewarperi get error that firefox cant handle apt19:59
anathema_Is there anyone who has sound problems too?19:59
BluesKajTimewarper, don't think it's meant for a browser from the description it's commandline20:00
TimewarperBluesKaj, can you tell me how to get flash 11 for ubuntu from here?20:01
Timewarperhttp://get.adobe.com/flashplayer/20:01
BluesKajred_ is bsnes what yiu're looking for ?20:01
Timewarperi am trying this 3 hours now20:01
TimewarperBluesKaj, any idea how to get that apt from their website?20:04
Timewarperit needs to use apturl and i cant configure it20:05
Timewarperi follow a guide didnt work20:05
BluesKaj Timewarper , download the player , it will be in your /home/user/Downloads file , open the file and copy the libflashplayer.so file and paste it to  /usr/lib/mozilla/plugins/ with root permissions20:05
TimewarperBluesKaj, i did something along those lines20:06
BluesKajwell it gas to exaqct20:06
Timewarpertook the tar unpacked it , and copied the .so file20:06
BluesKajhas20:06
Timewarperat various locations the guide said20:06
Timewarperin the end firefox didnt recognize i have flash plugin20:07
Timewarperand asked me to download it20:07
BluesKajwell, follow the instructions I just gave you ...sometimes a reboot is required , and make sure FF is closed before you try again20:08
Timewarperok20:08
anathema_Anyone who can help me with a sound prob?20:11
EagleScreenhi anathema_still with no sound?20:12
EagleScreencan't play in Systemsettings -> Multimedia with test option?20:13
=== jeff_ is now known as Guest74300
=== Guest74300 is now known as jeff-r-223
anathema_EagleScreen, can't play20:18
anathema_Tried to remove .pulse but no luck. I booted from live cd and the sound worked great!!!It's weird20:18
anathema_I saw the settings in Phonon and I have the same... It seems muted but I have checked all the levels20:19
anathema_I am searching for a way to reset to default settings20:19
anathema_EagleScreen, any idea?20:20
EagleScreenyes20:21
anathema_Im so confused :S20:22
anathema_EagleScreen, what idea?20:22
BluesKajanathema_, where did you check your volume levels?20:33
anathema_BladeFreak, alsamixer + kmix20:33
BluesKajwhat does aplay -l output ?20:34
anathema_**** List of PLAYBACK Hardware Devices ****20:34
anathema_card 0: CA0106 [CA0106], device 0: ca0106 [CA0106]20:34
anathema_  Subdevices: 0/120:34
anathema_  Subdevice #0: subdevice #020:34
anathema_card 0: CA0106 [CA0106], device 1: ca0106 [CA0106]20:34
anathema_  Subdevices: 1/120:34
anathema_  Subdevice #0: subdevice #020:34
anathema_card 0: CA0106 [CA0106], device 2: ca0106 [CA0106]20:34
anathema_  Subdevices: 1/120:34
anathema_  Subdevice #0: subdevice #020:34
anathema_card 0: CA0106 [CA0106], device 3: ca0106 [CA0106]20:35
anathema_  Subdevices: 1/120:35
anathema_  Subdevice #0: subdevice #020:35
anathema_sorry for flood20:35
anathema_BluesKaj, in live cd the sound works20:35
Tm_Tanathema_: pastebin (;20:35
anathema_Now I changed gstreamer to vlc backend20:35
anathema_but no sound20:35
anathema_Ok20:35
anathema_BluesKaj, it's ok the output?20:36
BluesKajyes, anathema_ , I think your default soundcard is not default , run cat /proc/asound/cards20:37
anathema_ 0 [CA0106         ]: CA0106 - CA010620:37
anathema_                      Audigy SE [SB0570] at 0x9000 irq 1920:37
anathema_but why in aplay-l it shows many devices?20:38
BluesKajaplay =l  shows the same devices inputs and oputputs20:39
BluesKajoutputs20:39
anathema_hmmm ok so it's default?20:39
BluesKajnot sure20:39
anathema_hmm, in phonon settings it's selected20:40
anathema_do you want a print screen?20:40
BluesKajneed to see ,  lsmod | grep snd , pastebin the output20:41
anathema_ok20:42
anathema_http://pastebin.com/zTZNihFZ20:43
BluesKajanathema_, ok , sudo modprobe snd_ca010620:45
anathema_ok20:45
anathema_done20:45
anathema_I must reboot/20:46
BluesKajanathema_, before you reboot open /etc/modprobe.d/alsa-base.conf  as root20:46
anathema_Ok opened20:47
anathema_BluesKaj, do you want to paste it?20:48
BluesKajok add theis line at the bottom , options snd_ca0106 index=020:49
BluesKajsave the file and then reboot20:49
anathema_ok20:49
anathema_i will be back20:49
anathema_BluesKaj, no :S20:52
anathema_If I change backend?20:53
BluesKajoh yes , gstreamer20:53
anathema_I have already installed VLC20:53
anathema_I will change to VLC and reboot is that ok?20:54
BluesKajvlc doesn't work anymore for some reason , on some cards20:54
anathema_hmm ok20:54
BluesKajbackend20:54
anathema_Is there any other to test?20:54
BluesKajphonon20:54
anathema_do you remember the package?20:55
anathema_xino?20:56
BluesKajmake sure your sound works there . it's the device prefernce at the same gui as the backend20:56
BluesKajsystem settings >multimedaia>phonon20:56
anathema_BluesKaj, In phonon-> backend I have Gstreamer only option20:56
BluesKajok , try the device preference test button at the bottom and make sure your soundcard is listed20:57
anathema_BluesKaj, my sound card is listed, I pressed test NO SOUND :S20:58
anathema_It says: CA0106 Soundblaster Analog Stereo20:58
anathema_BluesKaj, it's weird. Can we see if the modprobe and the other line we added worked?20:59
BluesKajmake sure you don't have any M in the alsmixer volume ctrls, they should all have 0020:59
anathema_BluesKaj, they have 00 but no all. some doesn't have something21:00
anathema_I will make print screen21:00
BluesKajdo you have pulseaudio installed ?21:00
anathema_pulseaudio is already the newest version.21:00
anathema_I have removed the pavucontrol only21:00
BluesKajthen install pavucontrol again , it will help you choose your device path correctly21:01
anathema_BluesKaj, i removed it because the gtk was awfull, missing icons etc21:02
=== TheLastProject_ is now known as TheLastProject
BluesKajalso, reopen /etc/modprobe.d/alsa-base.conf as root and make sure there are no other lines like this : options snd_ca0106 index=?21:03
anathema_ok what to see first in pavucontrol;21:03
anathema_my alsamixer print screen: http://imageshack.us/photo/my-images/546/aaayz.png/ @ BluesKaj21:05
CrellHi folks.  I'm trying to find information about ssh-agent so that I don't have to keep retyping my key passcode every time it starts a connection.  Everything I find googling, though, is basically just "well use ssh-agent", which is not helpful. Any hints on how to enable that fully?  As in, not just for a single sub-shell, but system wide and in the GUI (so that Dolphin doesn't ask me for a passcode 3 times every time I open a folder...)21:06
anathema_BluesKaj, I tried to open a video in youtube and some bars in Pavucontrol are moving!!!21:06
anathema_but no sound21:06
BluesKajanathema_, give me a few mins21:07
anathema_kk21:07
anathema_BluesKaj, tell me when you 're ready21:12
BluesKajCrell, http://www.thegeekstuff.com/2008/11/3-steps-to-perform-ssh-login-without-password-using-ssh-keygen-ssh-copy-id/21:13
BluesKajanathema_, i will21:14
anathema_ok thanks:)21:14
BluesKajanathema_, you could try it without pulseaudio and pavucontrol as well some cards don't work well with pulse21:15
anathema_I have uploaded a weird print screen with pavucontrol21:15
anathema_http://imageshack.us/photo/my-images/651/222ql.png/21:16
anathema_It;s weird because the bars are moving and it says Mono21:16
anathema_and also My card worked gr8 1 month ++ now21:16
CrellBluesKaj: Seriously?  Just typing ssh-add is all I had to do?  Why couldn't any other documentation just say that? :-)21:16
CrellBluesKaj: Is that something that will persist even after a restart?21:17
BluesKajCrell, no I think there's more to it than that21:18
CrellWell, just typing ssh-add fixed it for me.21:18
CrellI already had my key setup on all of my remote systems.  It was just asking for my passcode for the key itself every time.21:18
BluesKajCrell, ok good to hear , as long as it works21:21
anathema_also BluesKaj i dont know how to remove the pulseaudio and to work withou it. did you see the picture21:21
CrellThanks, BluesKaj!21:21
BluesKajanathema_,yes it looks like the audio is muted there21:21
anathema_BluesKaj, yeah... it's weird!21:21
BluesKajanathema_, sudo apt-get remove pulseuadio pavucontrol , then reboot21:22
anathema_without purge?21:22
BluesKajanathema_, then open phonon and test the soundcards listed ...you can purge if you want21:23
anathema_ok done rebooting brb21:23
anathema_BluesKaj, removed, rebooted and in test no sound21:26
anathema_BluesKaj, there are many devices now !!21:26
BluesKajtestbeach device21:27
BluesKajeach21:27
anathema_no luck21:27
anathema_BluesKaj, http://imageshack.us/photo/my-images/97/sssxe.png/21:28
anathema_:S21:29
=== cesur is now known as tszingatz
anathema_BluesKaj, because the live cd worked with pulse Is there any option to reset all the sound settings like the live cd without reinstalling?21:31
BluesKajAntisoche, there has to be something else wrong , do you have your speakers connected solidly and the volume on them turned up halfway etc21:34
anathema_BluesKaj, do you want to paste you the alsa conf?21:37
BluesKajok21:38
BluesKajanathema_, that above post was meant for you21:38
BluesKajsorry Antisoche21:39
anathema_Speakers and others are ok I have just rebooted from Windows that the sound worked gr821:39
anathema_It's very weird21:39
anathema_I don't want to reinstall :S21:40
BluesKajdunno how else to help , unless that module is the wrong one ..you could try the , snd_ac97_codec module instead21:41
anathema_if you can check this: http://pastebin.com/mqSWEDWQ21:42
anathema_Is there any way to boot from live cd and copy settings? or the modules? that worked21:42
phoenix_firebrdis there a digikam 2.3.0 ppa , need a 64 bit version21:44
BluesKajanathema_, move the , options snd_ca0106 index=0, line up to 4421:45
anathema_1 line up21:45
anathema_done21:45
anathema_I dont think that is problem isnt it?21:46
anathema_If i boot to live cd again I must copy a file?21:46
anathema_of settings?21:46
phoenix_firebrdcreative sound blaster?21:46
BluesKajanathema_, I suppose you could look in the alsa.conf file on the live cd  and see what module is index=0 which means default kernel module21:46
anathema_BluesKaj, I will copy paste the whole file21:47
BluesKajdon't think just do , sometimes cinf files can be tricky21:47
anathema_hmm21:47
phoenix_firebrdBluesKaj: is there a digikam 2.3.0 ppa? need a 64 bit version21:47
anathema_But the problem i think is somewhere else cause I didnt touch any conf :S21:47
BluesKaj'conf21:47
anathema_and the soundcard worked21:47
BluesKajyes you modifir=ed the alsabasecobf file like ai asked you to21:48
BluesKajanyway , I need a break from this21:48
anathema_Ok the only think is a line added21:54
anathema_BluesKaj, correctly?21:54
anathema_options snd_ca0106 index=021:55
anathema_this ^^21:55
BluesKajanathema_, yes21:56
anathema_οκ21:56
anathema_rebootin in live cd21:56
anathema_brb21:56
toumboHow can I mount an iso on Kubuntu?22:24
anathema_BluesKaj, no luck again :)22:27
rork!iso | toumbo22:28
ubottutoumbo: To mount an ISO disc image, type « sudo mount -o loop <ISO-filename> <mountpoint> » - There is a list of useful cd image conversion tools at http://wiki.linuxquestions.org/wiki/CD_Image_Conversion - Always verify the ISO using !MD5 before !burning.22:28
anathema_BluesKaj,  I have the alsa-conf of the live cd and the lsmod22:28
toumboSorry about my silly question but only I wantedd to know what program you prefer22:29
toumboThanks a lot rork!!!22:36
emetanyone know why "beep" doesn't work in kubuntu?22:39
rorkYou're welcome toumbo, I only mounted an iso once and I used that command :)22:40
rorkThere might be some other software if you have to mount iso's regularly though22:41
BluesKajanathema_, pastebin the /etc/modprobe.d/alsa-base.conf file if there is one22:43
BluesKajand lsmod22:43
anathema_BluesKaj, in live mode?22:45
TImewarperhey i got a problem. kmix channel window opens at every login.22:45
BluesKajyup22:45
=== ORiON is now known as Guest68230
anathema_ok22:45
anathema_BluesKaj, live cd alsaconf: http://pastebin.com/PUfhGDfZ22:46
anathema_and live-cd lsmod: http://pastebin.com/SkX6gHrx22:47
BluesKajanathema_, and lsmod ?22:49
anathema_BluesKaj, above22:50
anathema_I have pasted22:50
BluesKajok22:50
anathema_and live-cd lsmod: http://pastebin.com/SkX6gHr22:50
anathema_ok22:50
anathema_BluesKaj, i think that the alsaconf is the same except the last line we added22:50
anathema_I have removed it but the same thing22:50
anathema_BluesKaj, if you want my system's lsmod please tell me22:52
BluesKajanathema_, no need , the same module we installed is listed in first/default in lsmod on the livecd..it's probly using pulseaudio as well so the problem must be there22:55
anathema_BluesKaj, yeah..22:55
anathema_BluesKaj, we have removed it and reinstalled22:56
BluesKajdid you reinstall pulse ?22:56
anathema_yeah22:57
BluesKajon your system I mean22:57
anathema_yes: removed - rebooted-reinstaled -rebooted22:57
anathema_:P22:57
anathema_I have downloaded the alsa script22:57
anathema_and my results are here: http://www.alsa-project.org/db/?f=a4153b64117c5ffc19b3119a047100ff67e6035b22:57
anathema_maybe helps you22:57
anathema_@ BluesKaj22:59
BluesKajno , I'm out of ideas anathema_ ..sorry .it should work , make sure you have pulseaudio plugins installed , look in muon for those23:03
anathema_k23:03
anathema_thanks for your help, really thanks23:03
anathema_did you mean pulse-plugins23:05
BluesKajanathema_, yes23:05
anathema_ok23:05
BluesKajanathema_, you could try the options snd-cmipci index=0 in  /etc/modprobe.d/alsa-base.conf , then do sudo modprobe snd-cmipci ..it seems to be an alternative23:07
=== axel is now known as Guest86512
cato37Hello. I switched from 11.04 to 11.10 by wiping the hard drive and installing 11.10 fresh. One of the widgets on the task bar next to the Kicker that navigated the home folder is missing. In is place is the Activities Widget. It is no longer listed in the "Add Widgets" box. I have searced the net looking for a way to regain it, but i do not know what the widget is named to find it. Can anyone help?23:24
BluesKajcato37, you can add the home folder to the panel from the kmenu23:27
cato37BluesKaj: Thanks. I tried that. I also tried adding the Folder View widget, but neither behave the same way as this widget. It was a picture of a file with a small star in front of it on the lower right side.23:31
cato37BluesKaj: other than that there were no major issues except having to change to the xrender option to get the desktop window appearances to work right.  Other than that 11.10 is running smoothly, and is a job very well done. Kudos to you guys.23:37
jmichaelxdoes anyone else think that the flash plugin 11 64-bit royally sucks?23:41
frantajmichaelx: +123:45
BluesKajjmichaelx, dump the flashplin installer and download the flashplayer from adobe then open it in wherever it downloaded and copy the libflashplayer.so file to /usr/lib/mozilla/plugins/ as root ..I also installed klash23:45
BluesKajalso get rid of the nspluginwrapper23:46
BluesKajjmichaelx, correction dump the flashplugin installer23:48
jmichaelxin my case, it was the 64-bit plugin (without the flash installer) that was working like crap23:48
BluesKajyup same here23:49
BluesKajbbl23:49
jmichaelxi had gotten along well with the 64-bit "square preview" plugin, but increasingly things were turning up that would not play correctly, so needed to finally upgrade23:50
jmichaelxguess i'll be using 32-but flash for the time ebing23:50
jmichaelxbit*23:50
BarkingFishguys, I seriously need some help here. Firefox 8 is driving me mental.23:51
BarkingFishIt wants to direct me on every single webpage, to the SSL version of it. I don't want it to, I'm perfectly capable of deciding which version I want to load, i don't need it deciding for me :)23:51
BarkingFishHow the heck do I turn this "function" off?23:51
LINKSWORD2Hey guys, I'm having trouble figuring out why Rekong keeps crashing on me. I've checked into the Crash Details tab on the KDE Crash Handler, but it doesn't give me anything definitive.23:58
BluesKaj+23:59

Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!