[01:31] <Xase> lilstevie: devtmpfs is set
[03:11] <lilstevie> Xase: can you pastie your .config
[06:23] <Xase> lilstevie: http://pastie.org/2963119
[06:29] <lilstevie> Xase: change
[06:29] <lilstevie> CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" to
[06:29] <lilstevie> CONFIG_UEVENT_HELPER_PATH=""
[06:29] <Xase> alright lemme try.
[06:29] <Xase> even though it says not to,can I just nano that?
[06:29] <Xase> or should I use menuconfig
[06:30] <lilstevie> menuconfig should be easier
[06:31] <lilstevie> it is in the same menu as the devtmpfs stuff
[06:31] <lilstevie> also is CONFIG_CMDLINE="root=/dev/mmcblk1p2 rw noinitrd videoout=omap24xxvout omap_vout_mod.video1_numbuffers=6 omap_vout_mod.vid1_static_vrfb_alloc=y omap_vout_mod.video2_numbuffers=6 omap_vout_mod.vid2_static_vrfb_alloc=y omapfb.vram=0:8M no_console_suspend"
[06:31] <lilstevie>  your cmdline?
[06:32] <Xase> I think, I didn't config most of this, I'm just learning/troubleshooting.
[06:32] <lilstevie> cause if so, I would remove noinitrd and actually use an initrd
=== wgrant_ is now known as wgrant
[06:37] <Xase> Baaah
[06:37] <Xase> I'm not good at kernel configurations... now it's asking me to answer a whole bunch of stuff during make
[06:37] <lilstevie> what?
[06:37] <Xase> Like a walk through config.
[06:38] <lilstevie> didn't work?
[06:38] <Xase> Well it's like it's not reading my config file now.
[06:38] <lilstevie> did you remember to ARCH=arm at the end of your make
[06:38] <Xase> make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- -j4 uImage
[06:38] <Xase> That's what I'm using now, and what I used before :/
[06:39] <lilstevie> hm
[06:39] <Xase> Configure standard kernel features (for small systems) (EMBEDDED) [Y/n/?] y
[06:39] <Xase> Is it because I remoed /sbin/hotplug ?
[06:39] <lilstevie> is that all it asked
[06:39] <lilstevie> and shouldn't have really
[06:40] <Xase> No
[06:40] <Xase> It asks more if I keep answering
[06:40] <lilstevie> sounds like the config got screwed
[06:41] <Xase> Oh ok.
[06:41] <Xase> Imported from original git now.
[06:41] <Xase> Changing line
[06:41] <Xase> Building, and it's not asking dumb questions now.
[06:41] <Xase> Well not dumb questions, but it's not asking smart questions of a dumb guy ;)
[06:41] <lilstevie> heh
[06:43] <Xase> running makemenuconfig on it was breaking it :D
[06:44] <Xase> 667
[06:49] <Xase> Yeah, same result... Syslog fails first, and then udev repeatedly @ lilstevie
[06:50] <Xase> ude.service: main process exited code=exited, status=213
[06:50] <Xase> udev*
[06:50] <lilstevie> oh odd
[06:50] <lilstevie> that isn't the same issue I thought you were having
[06:50] <Xase> Yeah udev just starts and dies repeatedly.
[06:51] <Xase> You recommended setting Y to devtmpfs which was already set.
[06:51] <Xase> udev.service start request repeated too quickly refusing to start
[06:52] <lilstevie> have you got an initrd
[06:53] <Xase> I am unsure to be honest... I'm ew and was receiving help from some other folks earlier. In my boot partitio I have uImage uRamdisk u-boot.bin and MLO
[06:53] <Xase> new*
[06:55] <lilstevie> what about boot.scr
[06:55] <Xase> No.
[06:57] <lilstevie> hm ok
[06:58] <Xase> Should I make one?
[06:59] <Xase> I have no clue how to do that, but I'm sure I could wing it?
[07:04] <Xase> lilstevie: could it be my uRamdisk's fault?
[07:07] <lilstevie> no idea tbh
[07:07] <lilstevie> where is the source for uboot
[08:13] <Xase> the source for u-boot was used from this source http://images.barnesandnoble.com/PResources/download/Nook/source-code/nookcolor_1.3.tgz lilstevie
[08:13] <Xase> Sorry my internet goes wonky every morning between 2 and 3.
[08:13] <Xase> got disconnected from my shell
[08:21] <lilstevie> ok
[08:22] <lilstevie> I will have a look when I get some time, see how it works et al.
[08:22] <lilstevie> maybe figure out whether you need a .scr or something else done
=== Quintasan_ is now known as Quintasan
=== NCommander is now known as Guest76640
=== doko_ is now known as doko