[00:55] alith: Hi [00:56] alith: Did you look at the dbus commands? [02:28] having rough time franklin? [02:30] possibly [02:40] Well just a few [02:51] Daskreech: hello ;) [02:51] Hello [02:51] Daskreech: which version of KDE ar eyou runniing? And of Kubuntu? [02:52] KDE 4.8 on Fedora 16 [02:52] ah o0k [02:52] didn't know fedora 16 had kde 4.8 natively on it [02:52] like, kubuntu only has it through the PPAs [02:54] Similar for Fedora [02:55] Unless you are a rolling release distro you pretty much don't make crazy changes like that by default [02:58] Daskreech, what is safe video mode? [02:58] sorry i had to run some errands [02:59] bfig: when you boot the CD You have the option to boot or boot to safe video mode which takes drivers out of the picture [02:59] Long as a you have a processor and memory it should pretty much work [02:59] Daskreech, how can i select that option? i don't see it. i only have 'normal' or 'mem check' [02:59] Oh? Hmm [02:59] also, kms is automagic apparently on newer kernels === rene is now known as Guest65245 [03:24] Moinsen... [03:26] bbbbbbbbbb [03:26] b [03:26] b [03:26] b [03:26] b [03:26] b [03:26] b [03:26] b [03:26] b [03:31] d [03:32] I personally was thinking an ;) [03:35] kkk [03:36] join #anonops [03:37] lol [03:41] first time to use irc, so any one see this message,echo me [03:42] me [03:42] thank you! it works! [03:44] \o/ [04:21] hi [04:22] hi [04:26] zorobabel: Ah [04:26] Babel === jono is now known as Guest29470 [06:31] Hello! I'd like to setup NAS on my system. Could anyone suggest me guide specific to Kubuntu/KDE? I find - https://help.ubuntu.com/community/Samba?action=show&redirect=SettingUpSamba wherein https://help.ubuntu.com/community/Samba/SambaClientGuide gives instructions specific to GNOME.. What is an alternative package to nautilus-share for Dolphin? === jason is now known as Guest84415 === jason_ is now known as jascase901 === jascase901 is now known as jason_____ === jason_____ is now known as jascase901 [07:04] orated: NAS = Network Attached Storage? [07:07] orated: if you right click any Folder -> Properties -> Share [07:07] It's built in already [07:23] Daskreech: No, I didn't mean that. [07:23] Umm [07:27] Daskreech: I'm not sure if I require NAS to have frequent snapshots of Linux/Windows installations and to have a common server for all data to be accessible from both Windows and linux [07:28] No you just need storage though a NAS is not a bad way to have all of that [07:28] and if you have one already then you can just make use of it [07:30] My friend does the same thing with a hard drive just dedicated to storage [07:31] I already have ssh and nfs setup with which I can access/administer one system from another. But I don't have a common place to all the data organised in one place or to keep regular backup/snapshots of OSs in use.. so is NAS setup in Samba right for this? [07:31] Ah-ok [07:32] Yes or sftp since you have ssh setup already [07:33] Yes, I use that. I got new 720GB HDD so was considering it for backup and such [07:33] I'm quite confused with NFS and NAS atm [07:35] how so? [07:35] I guess its not different how NFS/NAS can be used to regularly take snapshots of system, right? [07:36] wait, one is for dedicated storage, other for sharing... [07:49] Daskreech: What do you suggest? [07:50] NFS is a file system [07:50] it allows a remote computer to be used as if it is a hard drive [07:51] NAS is a network attached storage. It's just a hard drive that is connected to a network interface [07:51] anyone got any suggestion on how to get the ccsm to launch the gui or show in desktop effect [07:52] show water effect* [07:52] You can put NFS on a NAS if you like then the Storage will be mounted as a directory in your computer [07:53] Daskreech: Yes, was going to ask that [07:54] Daskreech: Do you use any script/package to regular backup data to NAS? [07:55] !backup [07:55] There are many ways to back your system up. Here's a few: https://help.ubuntu.com/community/BackupYourSystem , https://help.ubuntu.com/community/DuplicityBackupHowto , https://wiki.ubuntu.com/HomeUserBackup , https://help.ubuntu.com/community/MondoMindi - See also !sbackup and !cloning [07:56] zombieomgwtfbbql: desktop effects is a kwin kcm ccsm is a compiz module [07:56] !info ccsm [07:56] Package ccsm does not exist in oneiric [07:56] ah that sucks [07:56] !search ccsm [07:56] Found: ccsm [07:57] ha ha liar [07:57] !ccsm [07:57] To enable advanced customization of desktop effects in Ubuntu: install 'compizconfig-settings-manager' (or 'simple-ccsm' for pre-Oneiric). If you install the latter, a new option will appear in your appearance properties - See also !compiz - Help in #compiz [07:57] !compizconfig-settings-manager [07:57] !info compizconfig-settings-manager [07:57] compizconfig-settings-manager (source: compizconfig-settings-manager): Compiz configuration settings manager. In component universe, is extra. Version 0.9.5.92-0ubuntu1 (oneiric), package size 1180 kB, installed size 5780 kB [07:59] compizconfig-settings-manager is what I have i just used the acronym just the problem is it won't boot when I launch or show a specific effect that I want that is in there [08:01] You are running compiz I presume? [08:01] yes [08:02] ok [08:28] Daskreech: Say, I regularly take backup of complete / from one system to NAS using rsync and If in future the system crashes that only option left is to reinstall. Then in such cases simply formatting the separate root partition and restoring last working root from NAS to it can work? [08:29] Yes [08:29] but take a look at things like bacula === orated_ is now known as orated [08:30] What do you use to backup/sync data to NAS? [08:32] sftp script [08:33] But I don't back up / [08:33] I don't see the point in doing that [08:33] orated: cp -p --update -R [08:33] one could use rsync? [08:33] hi everyone, i have upgraded from KDE 4.7.4 to 4.8 and kmail does not show correctly some emails. Instead it shows plain text and most of it is unrecognizible. I have seen that this is probably a new bug! Can anybody tell me if you have come up with it? [08:33] there's tons of options actually [08:34] naftilos76: haven't seen such problem myself [08:35] anybody else? [08:37] Tm_T: Yes, I prepared a script using rsync to backup [08:38] Daskreech: dd can restore all the data properly including MBR, right? whihc rsync cannot [10:27] hi i am facing a terrible problem can you help? [10:27] swaroop: cannot know until you tell your problem (: [10:28] i am using via vt837 sound card. alsamixer reports its doing well and vlc plays audio well but audio from amarok is grainy and unclear..:( === yofel_ is now known as yofel [10:31] even audacity plays right [10:46] hi can anyone help me please.. [10:47] hi guys !!! [10:49] can anyone help me please , i am using some plasnoid in kde4.8 on 11.10 i keep having the following message "unable to create python scriptengine for veromix" even if the kde scriptEngines are all installed === basso_ is now known as basso [10:59] hi everyone, i have upgraded from KDE 4.7.4 to 4.8 and kmail does not show correctly some emails. Instead it shows plain text and most of it is unrecognizible. I have seen that this is probably a new bug! Can anybody tell me if you have come up with it? === liz is now known as Guest87884 === Guest87884 is now known as Atamira === LjL_ is now known as LjL-Quassel === david is now known as Guest53824 === Guest53824 is now known as thekleine [11:53] !netsplit [11:53] netsplit is when two IRC servers of the same network (like freenode) disconnect from each other, so users on one server stop seeing users on the other. If this is happening now, just relax and enjoy the show. See http://en.wikipedia.org/wiki/Netsplit [12:29] !netsplit [12:29] netsplit is when two IRC servers of the same network (like freenode) disconnect from each other, so users on one server stop seeing users on the other. If this is happening now, just relax and enjoy the show. See http://en.wikipedia.org/wiki/Netsplit [12:52] Hello ! Il ya quelqu'un ? === D-Dam is now known as ddam === ddam is now known as D-Dam === Quintasan_ is now known as Quintasan [12:59] !netsplit [13:05] morning folks === eric is now known as Guest92922 [13:13] anyone having a problem with firefox and chromium when you log out and log in the browser is all black...? [13:13] strangely enough it doesn't happen with rekonq [13:18] ophelias_: does the same happens with other GTK apps? [13:19] no [13:20] I have applied the gtk-chtheme fix [13:20] when i restart my machine it's fine [13:20] its' just when the machine goes to sleep during a session or when i log out and back in it happens [13:31] Bonjour ! :) === tristan_ is now known as Guest52904 === Guest52904 is now known as Paconnu [13:32] bonjour [13:32] on parle anglais ici ;) [13:32] Ah désolé :/ [13:33] Oh sorry* [13:34] no problem [13:34] :) [13:35] hmm === riker is now known as ctothej [13:47] hi guys !!! [13:50] hey DoctorPepper === eugen is now known as Guest53329 === Guest53329 is now known as Neuer_N [13:56] hi all [13:58] can anyone help me , i cant get some plasmoids to work on kde 4.8 , i get the following "Could not create a python scriptegine for " plasmoid name "widget" [14:03] ok guys ive been trying to install Ralink driver rt2870 for my wireless usb but everytime i get to the make part i get the same error no matter what I do ( Ive looked all around and i cant find anything to support me ) [14:03] make[2]: *** [/home/txnert/Desktop/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/cmm_mac_usb.o] Error 1 [14:03] make[1]: *** [_module_/home/txnert/Desktop/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux] Error 2 [14:03] make[1]: Leaving directory `/usr/src/linux-headers-3.0.0-15-generic' [14:03] make: *** [LINUX] Error 2 [14:03] Vako: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation. [14:03] thats the error [14:03] ahhhh darn. my bad [14:04] http://paste.kde.org/198488/ [14:04] Any help will be deeply appreciated [14:13] Vako, maybe you won't need to compile the driver , the default kernel drivershould work with a minor hack : https://sites.google.com/site/easylinuxtipsproject/internet#TOC-Ralink-RT2870-chipset [14:21] BluesKaj http://paste.kde.org/198524/ [14:21] boa tarde !!! [14:23] ll [14:23] Vako, bummer , I use the same driver for wifi on my other pc , well I used to til 10.04 , then i couldn't get anything work with the belkin usb wifi stick [14:24] Vako, I was hoprng that page was the solution , but no joy there either :( [14:24] Vako: this is not the complete error output while building the module. please pastebin all of the output. [14:25] Torch that is the whole output [14:26] Vako: you're probably following some tutorial for this. where is it? [14:28] which of the 500 thousand ive seen [14:28] wait [14:29] Torch, https://sites.google.com/site/easylinuxtipsproject/internet#TOC-Ralink-RT2870-chipset [14:29] http://www.cyberciti.biz/tips/linux-install-rt2870-chipset-based-usb-wireless-adapter.html [14:29] i tried that way [14:29] amongst hundreds [14:30] Vako: the download link on that page is broken. [14:30] Vako: where do i get the sources? [14:30] 1 sec [14:32] http://www.2shared.com/file/rzHnkYDI/2010_0709_RT2870_Linux_STA_v24.htm [14:39] :/ [14:39] BBL [14:39] hi all [14:39] \o [14:39] Vako: and you're not getting any error messages when building this? [14:39] Vako: i get lots of em [14:40] i'm trying to change the keyboard layout [14:40] Vako: http://pastebin.com/EKBDUQ3Q [14:40] but in my system there is no "kcm_keyboard_layout" [14:41] Vako: the combination of -Werror=implicit-function-declaration and the missing declaration for usb_buffer_alloc being the point [14:41] any ideas? [14:41] Vako: some former kernel versions probably pulled in some include that has this and that's no longer the case. [14:41] i get that exact output [14:41] Vako: so why did you tell me there WERE NO MORE ERRORS? [14:42] because i thought you was asking abput the errors i get when doing what BluesKaj suggested [14:42] Vako: anyway, find a newer version of this source code, fix the code, unset the -Werror setting or... dunno, that's probably the alternatives you have. [14:43] * Torch is afk. [14:43] back to 0 [14:59] so no one knows where it went the panel to change the keyboard layout? === SMD is now known as Vako [15:08] !netsplit [15:08] netsplit is when two IRC servers of the same network (like freenode) disconnect from each other, so users on one server stop seeing users on the other. If this is happening now, just relax and enjoy the show. See http://en.wikipedia.org/wiki/Netsplit [15:08] hi guys !!! [15:09] can anyone please help me , i cant get any python based plasmoid to work on 11.10 with kde 4.8 [15:45] Vako, dwspite the error message after trying the tutorial and modprobe errors with rt2870sta , i ran these 2 command and now my belkin usb wifi stick is working fine : sudo ifconfig wlan0 up , then,sudo iwlist wlan0 scan|grep -i essid [15:47] BluesKaj kubuntu now supports the darn driver I was so blind to see that vmware was telling me to enable the darn thing thru removale devices [15:47] my problem now.. DONT HAVE INTERNET [15:47] :/ === mgagne is now known as wftl [15:48] Vako, ahh good ol' VMware , ppl should always mention that when asking for help [15:48] Vako, laptop? [15:49] yes [15:49] is there a way to install wicd on it? [15:51] Vako, try those 2 commands anyway , it can't hurt [15:52] i did [15:52] and nothing [15:52] reboot [15:53] k [15:53] usb doesnt even blink [15:54] :/ [15:54] its an Alfa usb btw [15:54] nothing [15:55] anything? [15:58] darn [16:05] BluesKaj nothing then? [16:07] Vako: fwiw I have an Alfa AWUS036H usb wifi thingy here and it worksVako: fwiw I have an Alfa awus036h usb model here that uses rt8187 driver built in to kernel [16:07] I have not tried hot pluggin it, but rather had it plugged in while machine was powered down, then booted it [16:08] network manager saw it immediately just fine and I did not have to do anything special to use it [16:08] but this is real hardware and not a VM [16:09] thats the thing [16:09] i have the Alfa AWUS036NH [16:09] I can't speak to USB support vmware is providing to your guest [16:10] and the driver for the nh may not be complete yet [16:11] yah it works just ubuntu playing tricks [16:13] ah - ok - the rt2870sta should be working now, was unsure of where it was at [16:14] I saw earlier BluesKaj had it working [16:15] i enabled ralink [16:15] typed [16:15] sudo ifconfig wlan0 up [16:15] sorry Vako , I was checking out the transfer rates over ssh , pretty slow over wifi vs the ethernet conn. [16:16] blinks slowly but wont find any networks [16:16] dont know what else to do [16:16] Vako, you have to run this as well , sudo iwlist wlan0 scan|grep -i essid [16:17] Interface Chipset Driver [16:17] wlan0 Unknown rt2800usb - [phy0] [16:17] i did BluesKaj [16:18] Vako, mine is the rt2870sta [16:18] starts blinking fast.. then goes back to blink slow [16:18] i try insttalling it BluesKaj but its giving me the error i posted when i came [16:18] yes - that rt2800usb sounds like a wrong driver possibly [16:19] how did you get over the errors BluesKaj [16:21] can anyone please help me , i cant get any python based plasmoid to work on 11.10 with kde 4.8 i get the following error "Could not create python scriptegine" [16:22] DoctorPepper: might be incompatible python versions. [16:22] Hi, I'm trying to install Lesbian Linux but I keep getting core dumped. [16:22] It's kind of sticky. [16:23] dangggg [16:23] i ran the last part of that tutorial , where it calls for updating the driver after upgrading the OS , I then ran those 2 commands after rebooting [16:23] DoctorPepper: but that's just an uninformed shot in the dark, really. [16:24] Clitoris, enough , change your nick pls [16:24] BluesKaj you loost me [16:24] what's wrong with a clitoris? [16:24] !language [16:24] Please watch your language and topic to help keep this channel family-friendly, polite, and professional. [16:25] !ops | Clitoris [16:25] Clitoris: Help! Channel emergency! (ONLY use this trigger in emergencies) Hobbsee, Tm_T, Nalioth, Riddell, seth, imbrandon, gnomefreak, nixternal, ryanakca, mneptok, PriceChild, tsimpson, jussi, Pici, ikonia, genii, Mamarok, claydoh, maco, apachelogger, seele, Nightrose, JontheEnchidna, rgreening, or txwikinger [16:25] People think female genitalia are dirty and disgusting... pityful. [16:25] sorry, slow chanserv [16:25] thanks ikonia [16:25] heh [16:26] * maco rolls eyes [16:26] im still lost [16:26] sorry about that, [16:26] LjL, I was giving him chance to change his troll outfit into something more acceptable [16:26] BluesKaj: wasted time, they did it in other channels too [16:26] LjL, ok [16:27] Vako: I'm not an expert, but you may need to investigate if you need to blacklist the rt2800usb so that you can load the st2870sta that BluesKaj has working [16:29] Vako, open your /etc/modules with root permissions, add rt2870sta to the bottom of the list [16:29] ima do this http://www.cyberciti.biz/tips/linux-install-rt2870-chipset-based-usb-wireless-adapter.html [16:29] qbit, yeah , that's a thought [16:29] and let you know [16:32] if it were to come to blacklist needed to force the rt2800usb not to load you can create a 99-local.conf file under /etc/modprobe.d with blacklist rt2800usb on a line as contents [16:34] what I do not know is if/whether all 4 variants of rt2800xxx would be needed, I simply do not know this [16:35] but I'd only do the one to start [16:37] qbit , /etc/modprobe/blacklist.conf [16:38] that's good, I just tend to use a .local as a personal preference [16:39] what's in mine currently is the couple of things I needed to get a PCI parallel port card to print [16:41] but yeah - blacklisting is probably better done there, for sure [16:41] i have to check the wifi pc's blacklist to see what's there , just to be sure [16:43] think i blacklisted the 2800 drivers on previous tries to get the usb wifi stick working [16:43] BluesKaj: I bet if he can dump the driver that doesn't work and replace it with the one you've confirmed to work he has a chance [16:44] qbit, I'm not entirelu sure that driver actually works , think maybe the default kernel driver is overriding it , but i'm not sure yet ...I have some to do , but I'll check the other pc to find out [16:45] have some stuff to do, BBL [16:45] I understand - I remember some reading a while back that left me with the impression these drivers were not completely done yet [16:56] qbit, oddly enought there aren't rt2800 driver blackisted anywhere in /etc/modprobe.d [17:00] so i have two laptops, this one is kubuntu, and i have one with ubuntu hooked up to my big screen tv, i wanna be able to play movies and music and whatnot on the one on the tv but control it from this one, is there a way to do this? they are both running 11.10 and are connected via wireless network [17:01] BluesKaj: so just adding it to modules may be all that's need, and it attaches to the right one without any blacklisting needed [17:02] the site option is not working [17:02] :/ [17:03] i blacklisted them and now doesnt even detect a driver :/ [17:04] however there is a rt2870sta.conf file listed there [17:05] Vako, I don't think blacklisting is necessary in 11.10 [17:05] im gonna no crazyyyy [17:05] so what you suggest now? [17:06] Vako, open /etc/modeprobe.d , do you have a rt2870sta.conf file there ? [17:07] no [17:07] let me get it [17:07] i see a rt2870sta.dat [17:08] not conf [17:09] ? [17:10] sorry [17:10] rt2870sta.conf is in modprobe.d [17:11] install rt2870sta modprobe --ignore-install rt2870sta ; /bin/echo "1737 0078" >$ [17:11] thats what it says inside the conf [17:11] Vako, ok run these commands , ignore the errors , then reboot , i'll have more instructions after you log back in. [17:12] Vako, http://paste.kde.org/198686/ [17:12] all eyes [17:12] txnert@Legend:/etc/modprobe.d$ sudo modprobe -rf rt2870sta [17:12] FATAL: Module rt2870sta not found. [17:13] lol [17:13] now what [17:13] ignore the errors , reboot [17:13] didnt do nothing [17:14] that was just the 1st command [17:14] run them all [17:15] xnert@Legend:/usr/src/2010_06_25_RT3572_Linux_STA_v2.4.0.0$ sudo modprobe rt2870sta [17:15] FATAL: Module rt2870sta not found. [17:15] FATAL: Error running install command for rt2870sta [17:15] we don't need to see the berrors [17:15] errors [17:15] done did them all [17:16] make sure you run the iwconfig [17:16] i did [17:16] ok reboot [17:16] no devices found on neither of the 2 [17:16] its up [17:16] now? [17:17] sudo ifconfig wlan0 up [17:18] wlan0 or whatever wlan says in iwconfig [17:18] it could be wlan1 or 2 [17:19] then , sudo iwlist wlan0 scan|grep -i essid [17:19] or whatever number wlan was assigned in iwconfig [17:20] found 4 [17:21] 4 what ? [17:21] txnert@Legend:~$ sudo iwlist wlan0 scan|grep -i essid [17:21] ESSID:"InternetTRICOM" [17:21] ESSID:"Aquino Jimenez" [17:21] ESSID:"Maruka" [17:21] ESSID:"Maruka" [17:21] Vako: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation. [17:22] eeeeek [17:22] i always forget not to paste here [17:22] Vako, ok , now try a browser [17:22] nothing [17:23] on the network manager doesnt even find a network [17:23] sudo dhclient wlan0 [17:24] still waiting [17:25] Vako, remove that rt2870.dat file from /etc/modprobe.d [17:25] theres no such thig there [17:25] only the .conf [17:26] sudo dhclient wlan0 still thinking [17:27] ohhh shit [17:27] it got online [17:27] how? dont ask me [17:28] I'm not asking , it worked for me , Vako [17:28] but thank you very much [17:28] after 7 hours it workedd haha4 [17:29] let's hope it works after a reboot [17:29] Hi all, i'm new to linux and loving kubuntu and kde so far, but my dead keys stopped working after installing Gimp, anyone with a little free time can help me please? Thanks :) [17:29] ut oh hehehe.. lets wait [17:30] david__, dead keys stopped working? [17:30] yes [17:31] i'm using a spanish layout with dead keys [17:31] but they dont work [17:31] pls clue me in , what are dead keys ? [17:31] ´a ´e ´i [17:31] accents :) [17:31] i was gonna say if they are dead they are not supposed to work lol [17:31] hahaha [17:32] they work on gtk apps but not on qt ones [17:32] david__, perhaps you should ask in #kubuntu-es or #ubuntu-es [17:33] Thanks, i will try :) [17:33] english KBs have little use of accents [17:33] BluesKaj any knowledge of aircrack? [17:33] the mac wifi ? [17:34] aircrack ng [17:34] to scan for wifi [17:35] just run iwlist [17:36] iwlist scan , I think :) [17:42] Vako, we don't encourage illegal actitvitie here , if you plan to use a local wifi networlk illegally , then we can't help you [17:44] nahh [17:44] not for that [17:45] Vako, run lsusb , paste the Wireless USB Adapter line here === kubuntuser is now known as pebege === pebege is now known as pebege_ [19:02] hi all [19:02] Guys, can I get some advice please? I took pulseaudio off my machine a while back because it breaks some of my software and doesn't work properly for me. The problem is that one of the progs I now want to install uses pulseaudio, and if I put it on, it's gonna break all the other stuff I want. [19:02] Is there any way of limiting pulseaudio to only run with the applications I want it to, rather than across the whole session? [19:15] BarkingFish: no, but I think you can do it the other way, stop it from running on a perticualr application [19:16] "pasuspender - Temporarily suspend PulseAudio" [19:16] Hm. So I might be able to leave it running with mumble, but disable it for audacity... [19:17] ^^ however I think you will get no audio from application (but the one you use that command on) while using that command [19:17] That's the biggest issue for me, is that it breaks my sound inputs when I run audacity. I can hear perfectly, but trying to hit a mic input is nigh on impossible. [19:18] ^^ never played with a mic on it, but I would be suprised is there wasnt a way to make it work [19:18] BarkingFish: what version of kubuntu are you on? [19:18] 11.10 [19:19] I need the mic inputs working on audacity, it's what I record spoken articles for wikipedia on. [19:22] BarkingFish: have you rtied: http://askubuntu.com/questions/29185/how-do-i-setup-audacity-and-pulseaudio-to-record-from-a-line-in :? [19:23] yeah, problem is that this isn't a line in === Sharky is now known as Shark === Shark is now known as Wolf1996 [19:23] My headest is weird. It's wireless, receiver plugs into the pink mic socket - I've tried it on a line in with no result whatsoever. All i get is static [19:24] 0_o === baris is now known as Guest16022 === Guest16022 is now known as baris_ [19:46] Where/how do I crete a hotkey to open a program of my choise? === michael is now known as Guest36460 [20:03] hi [20:04] <---- hat heute linux installiert und ist bisher begeistert =D [20:05] Tudo muito tenso. [20:06] is here some german who can help me? [20:08] is here anyone who can help me ? :D [20:16] Guest36460: there is #kubuntu-de if you prefer german [20:17] Guest36460: and just ask question, otherwise we do not know if anyone can help you :) [20:27] ok my question: How can i install a programm in linux? [20:27]