[00:02] btw, those on pandaboards and having trouble with quiet or muted audio, open alsamixer and goto DL1 Media and adjust the volume. You're welcome. [00:18] pbuckley: I've uploaded the ucm fixes and our kernel guy was supposed to spin up a new kernel with the patches. Should have a working system ootb next week. [00:18] At least for audio out. Haven't tested audio in yet. [00:20] nice, thats great news. Audio is a lot like oxygen, don't realize how much you use it till it's gone [00:21] also took your advice and attached a hard drive to my pandadesktop board [00:21] huge difference (duh) [00:27] heh. [00:47] hello all , i encode h264 by using gstreamer in ubuntu 11.10 , but [00:47] can't encode h264, is that miss some h264enc codec ? [00:47] also i have updated all the PPA , the kernel is 3.1 [00:47] http://groups.google.com/group/pandaboard/browse_thread/thread/d8d98dee7c50f791# [01:45] GrueMaster: I got a third pl2303 cable and it worked [01:45] GrueMaster: third time is the charm [01:46] Excellent! [01:46] GrueMaster: interesting it reports the same details when I run set serial, I am unable to set baud_base [01:46] GrueMaster: but it works [01:46] Very odd. [01:47] yes really odd [01:47] not sure what the issue is with those cables [01:49] I guess that company just makes unusable cables [01:50] Personally, I have had so many problems with them, mainly not being able to enumerate in a sane manner. I have an old Atom system that I use as a serial console, and I ended up buying an 8-port pci serial card. Of course, now I have 13 system consoles to monitor... [01:51] nice [01:51] Not really. My desk looks like a snake pit. [01:51] too many cables [01:51] wish there were wireless usb serial devices right :p [01:51] And I just ran out of network ports on my 16 port switch. [01:52] you need a 96 port switch :p [01:52] just left scathing review for those broke cables [01:52] heh. I'd probably fill it next cycle (I bout this one last cycle when I only needed 9 ports). [01:53] I need to get a switch to I guess [01:53] I have been using three routers, two of them bridging [01:54] I've never had a failing cable from Trendnet. Just no way to differentiate between the 4 that I have. And the 4 port usb-serial cable is just a cable with an integrated hub & 4 pl2303 chips. [01:54] Thats good [01:54] the last time comcast tech support came to my home he was counting the number computers I had [01:54] All of my switches are 1Gb "dumb" switches (no programming of vlans, etc). [01:54] he is like you can only have 5 computers connected [01:55] Yet another reason I don't do comcast. [01:55] i said dont worry 5 of them dont talk to the internet so its fine... he was like ooh ok [01:55] well my apartment gets either comcast or 128 kbps dial up [01:55] or whatever [01:56] its either comcast or dialup [01:56] no dsl [01:56] I have 15 in my office alone, plus 2 in the study (wife & kids), a PS3, a Wii, an XBox, and two chumbies. [01:56] I'm on DSL. [01:57] in my town they decided that cable was utility so every apartment complex can just have one hence monopoly [01:57] Dedicated IP (only changed once since 1999). No hassles. They even alert me if they are seeing oddities on my link. [01:57] thats nice [01:57] who is your provider? [01:57] Yea, they have done that all over the place. [01:58] My phone line is Qwest/Century Link. My ISP is dsl-only.net. [01:58] qwest is sitll alive ;) [01:58] still* [01:59] I only have 3 choices for internet (I don't count dialup/satelite). Comcast, Centurylink (they bought up Qwest apparently), and one local ISP that uses 802.11b. [02:00] When I moved here in 2003, I already had dsl & dish network. I called comcast and asked them to remove their cable from my house. They said that it was illegal for me to not be connected. [02:00] lol [02:00] I ended up cutting the cable and leaving it in a pile next to the pole across the street, then called up and reported a down cable. They removed it very quickly. [02:01] nice job [02:01] comcast only sucks blood [02:01] they charge me $70 for a pathetic 8/2 connection [02:01] On my street, 7 out of 8 houses have switched to dish or ditect tv in the last 6 months. [02:01] On a good day I get like 3-4 Mbps down [02:02] I wish I had a choice [02:02] Better than I get, but I'm in the sticks. [02:03] My line is rated at 7.5/1.5, but even after rewiring my house with cat5e, I still can't seem to get better than 5.5/768. [02:03] I think it is the pipe between our town and Portland. [02:03] hmm [02:03] well at least you get 5.5 on an average [02:04] most days if get like 2-2.5 [02:04] I dont care much for upload [02:04] And I sometimes need it. I mirror ports.ubuntu.com every 2 hours, and cdimage.ubuntu.com every 6 hours (only for arm stuff). [02:05] aah [02:06] I bought a cheap rack cabinet ($150) for the basement. It has 2 1U rack systems (mirror & firewall), plus a few older boxes and a test platform running remotely. [02:07] nice [02:08] Between running my own computer consulting business for 6 years in the 90's and working in validation labs at Intel, I kind of got used to having a lot of equipment. [02:09] Wife thinks I'm nuts. I call it "Terminal Insanity". [02:10] having lot of computers is never wife approved :p [02:10] Who said anything about asking permission? [02:10] :P [02:13] its friday night [02:13] time to head out to the water hole :p [02:14] It is???? Time flies when you don't know what you are doing. [02:14] have fun ;) [02:14] You too. [05:21] I am trying to build mainline kernel [05:21] I was wondeirng if I have to pass anything specific to build armhf kernel [05:21] i am running precise === rickytaylor26 is now known as ricky26 === llsquire_ is now known as llsquire [07:26] never mind i figured what needs to be done :p [07:40] GrueMaster, none of the 11.10 releases (server and desktop) worked for me. [07:41] My PB hangs here: [07:41] http://www.fpaste.org/HfXJ/ === zumbi is now known as Guest36554 [14:54] Hi. I need some help cross-compiling ubuntu-arm (the 12.04 omap3 hard-float variant). make CROSS_COMPILE=arm-linux-gnueabi- ARCH=arm hiccuped at the Bulding modules stage. [14:57] Clarification: I want to cross-compile the ubuntu-arm source. [14:58] TonyWatertown: what's the error? [14:59] marvin24_DT: MODPOST 2285 modules [14:59] ERROR: "__sync_fetch_and_and_4" [drivers/staging/line6/line6usb.ko] undefined! [14:59] ERROR: "__sync_fetch_and_or_4" [drivers/staging/line6/line6usb.ko] undefined! [14:59] WARNING: modpost: Found 4 section mismatch(es). [14:59] To see full details build your kernel with: [14:59] 'make CONFIG_DEBUG_SECTION_MISMATCH=y' [14:59] make[1]: *** [__modpost] Error 1 [14:59] make: *** [modules] Error 2 [15:00] well, the mismatches should be non critical [15:00] the undefined symbol ... [15:00] you can try mrproper or disable the module [15:01] it is from staging anyway [15:02] marvin24_DT: how can i disable the module? sorry for the newb q. [15:03] TonyWatertown: run "make menuconfig" and find the driver in drivers staging [15:03] marvin24_DT: Ok. I'll go give it a shot. Thanks for your help! [16:26] I know this is probably not the right channel, but does anybody know a channel with people experienced with ARM NEON developing? [16:57] marvin24_DT: Thanks for the help. I was able to get the kernel cross-compiled. === jkridner___ is now known as jkridner === Lopi__ is now known as Lopi