[00:11] hola buenas noches [00:12] alguien me puede ayudar? [00:12] ?? [00:12] tynajas: >> #wikipedia-es :) [00:12] alguien tiene idea de squid? [00:13] gracias ya lo visite :)) [00:13] de nada [00:13] Alguien tiene idea de proxy en linux? [00:13] ubuntu 11.04 para ser mas preciso [00:14] necesito ayuda con squid [00:15] !es [00:15] En la mayoría de canales de Ubuntu se habla sólo en inglés. Si busca ayuda en español o charlar entra en el canal #ubuntu-es. Escribe "/join #ubuntu-es" (sin comillas) y dale a enter. [00:15] agg === apachelogger_ is now known as apachelogger === stephane is now known as Guest96346 [00:29] hi there [00:32] i have some issues whit kde [00:32] sometimes it completely freeze whit no apperent reason [00:34] and after 1-2 min just returns to work fine [00:35] have someone the same issue? [00:36] *has [00:49] Hello Everyone, I have an easy question, how do you find the UUID of the Partition where you are CD'D Into When Regular BlKID Doesnt Find It [00:50] I have mounted it and I want to make an fstab entry for it but i cannot find its UUID === cassio is now known as Guest13755 === ringlej__ is now known as ringlej [03:12] hi, im using kubuntu 11.10. i had it configured so the monitor never goes to sleep. i let it install some updates today, and now the monitor is going black after like 1 or 2 minutes of inactivity. ive checked in the "power management" and "Display and Monitor" settings and theres nothing there set to turn the monitor off [03:13] does anybody have any ideas where else i would look? [03:24] giantpune: I presume that you've disabled the screensaver? [03:24] yes [03:24] as a test, i enabled the screen saver to one with some colors. after a minute, the monitor just goes black, not to th escreen saver [03:25] im using a desktop, so there is no battery and most of the power saving settings are not available [03:25] Any chance your monitor has a built-in screensaver? [03:25] i dont think so. it hasnt been doing this for the few years i had it. it jsut started today [03:26] i have the computer connected to a TV and a monitor. let me sit here a bit and see if the TV goes black at the same time [03:27] yup, the TV and the monitor both go black [03:33] giantpune: Can you bring up a console and run this command "ps auxww | grep screen" and see if anything relevant comes up? [03:34] j 28529 0.0 0.0 93604 872 pts/0 S+ 22:33 0:00 grep --color=auto screen [03:34] or "grep screensaver". [03:34] If that's all that turns up, I don't know what's going on, sorry. [03:34] j 28890 0.0 0.0 93604 876 pts/0 S+ 22:34 0:00 grep --color=auto screensaver [03:35] Do you also have any of the other desktop environments installed, per chance? [03:36] i have good ole kde. and i guess theres a bunch of gtk stuff installed in the background for running gtk apps [03:36] BTW, "ps auxww | less" will show you everything running on your system. You could go through it, line by line, to find the culprit. [03:37] GTK apps? Could the problem child be one of them? [03:38] i suppose it could. all of them i have were installed from the package manager. its stuff like the ubuntuone frontend and the ubuntu disk utility [03:38] Iidk if any of othem would have had it install some extra power-saving mumbojumbo along with it [03:40] It sounds like you have some detective work to do. [03:41] im going through now and setting all the setting, then saving them, then disabling the setting, and saving it again. maybe there is some default in some config file somewhere that needs wiped out or something [03:45] woot. i think that did it for me. [03:47] What was it? [03:49] i went into "Power Profiles" and clicked the second item in the list on the left. all the settings like "screen energy saving" were unchecked. i checked them all, adjusted them to some random value, saved it. then unchecked them all again and saved it again and now it works [03:49] Interesting. [03:51] it probably would have been nice to see whatever config file is associated with this menu before i made the changes === chalced is now known as chalcedony === AD is now known as Guest86000 === ashwin is now known as Guest26001 [06:24] приав [06:24] heloooooooooooooo [06:24] what s upppppppppppppppppppp [07:13] morning === hp is now known as catopette === catopette is now known as hp === hp is now known as guest1299 === guest1299 is now known as catopette [08:58] useless chan [09:00] * jalcine is tempted to feed troll. === hp is now known as Catopette [09:15] sudo su [09:16] I like KDE, it supports my hardware, who the gnome does not [09:25] I run KUBUNTU [09:25] Found error in sources.list in the newest kubuntu [09:26] When i run sudo apt-get update i get all error [09:27] hp: new install or upgrade? === hp is now known as Catopette [09:31] hi guys, do you know when kde 4.8.1 will be available for onereic? === dnivra_ is now known as dnivra [09:34] baxeico: when it's ready, hopefully soon [09:34] Tm_T: thanks [09:35] baxeico: you can expect release announcement in http://www.kubuntu.org/news [09:37] hi [09:38] Where should I look or what should I be doing to get TouchPad on Dell Inspiron ( N 5050 ) to work properly with Kubuntu 11.10? [09:39] I have searched the interwebs, including launchpad, but haven't found a solution. [09:40] In System Settings -> Input Devices -> Touchpad, it says "No Touchpad Found" [09:45] pradeepto: have you tried searching with the touchpad device id? [09:46] Tm_T: when I run xinput list, I don't see any mention of touchpad device in the list [09:46] lshw? [09:48] Tm_T: nopes, nothing in there as well [09:57] Tm_T: for example, Fn+F8 toggles trackpad nicely on this laptop, a thinkpad running 11.04. But it ( Fn+F3 dell specific ) doesn't work on the Dell Laptop running Kubuntu 11.10 [09:58] xinput list shows "TPPS/2 IBM TrackPoint" on this box [10:26] Need a program to make my computer a restorepartition, help, tryed mondo, does not work [10:36] how do i make a kernel for my computer === hp is now known as Catopette === mydogsnameisrudy is now known as monkeyjuice === nixmaniack is now known as n1x [11:15] Tm_T: apparently it was listed as ALPS GlidePoint ( which I didn't know is generally the name of the trackpad on Dell ), have disabled this bugger with xinput. [11:15] Thanks for the help, appreciate it. [11:19] pradeepto: np [12:02] Howdy all [12:28] hi, yesterday I upgraded my kubuntu with latests packages for kde 4.8.1 (I think) [12:28] is somebody else experience misbehaviours in kmail2? [12:29] hi, yesterday I upgraded my kubuntu with latests packages for kde 4.8.1 (I think) [12:29] is somebody else experience misbehaviours in kmail2? [12:29] experiencing [12:33] Noen Norske her da? [12:54] how can I create a user that 1. does not need a passwort to login, 2. that does not need a password to unlock a screen, 3. that does not lock the screen when fast switching users? (and please do not tell me how unsafe blabla and whatever this is,.) [12:55] I already configured KDM to "allow login without password" for that user but when I switch users the session automatically gets locked and since kubuntu does not allow me to create a user without a password for some reason, I need a password there :( === prateek is now known as Guest13726 === yofel is now known as yofel_ === yofel_ is now known as yofel === bulldog98_ is now known as bulldog98 === af_ is now known as Guest31311 === dex is now known as Guest40090 [14:32] hi to everyone!! [14:32] Can I ask to u a question? [14:33] how can i have more effects in my Kubuntu? [14:33] ErSnaPpy: Poke about in SystemSettings. [14:34] There's a Desktop Effects section there. === cassio is now known as Guest43562 === |GuS| is now known as [GuS] === __dan__ is now known as ___dan___ [15:05] <___dan___> you guys amarok [15:05] <___dan___> hehe [15:07] hello there [15:07] <___dan___> hi cespinal_ [15:07] <___dan___> really quiet in here :( [15:08] yeah :S [15:08] I just wanted to ask someone a quick question.. [15:08] Don't ask to ask, just ask. :) [15:08] <___dan___> im no expert but will have a try :) [15:08] Does anyone know how rekonw 0.9 will come for 11.10? [15:09] rekonq [15:09] <___dan___> is there not a ppa? [15:09] * ___dan___ uses firefox [15:09] nop... there not a ppa for kubuntu [15:09] chakra anr arch already have it :S [15:09] and* [15:09] it's not likely that a new version will be uploaded, unless it's a bug fix release [15:09] <___dan___> 12.04 is out soon :) [15:09] there are a couple of git repos around there... but their version is way too unstable.. [15:10] at least, not in a non-backports repo [15:10] yeah.... I used the beta and rekonq 0.9 was amazing.. [15:10] <___dan___> cool :) [15:11] <___dan___> havent tried 12.04 yet [15:11] <___dan___> considering a dist-upgrade from 11.10 :) [15:12] well... in my case, I completely wrecked my system after some updates.. [15:12] <___dan___> maybe i will leave it a week or two then [15:12] <___dan___> hahah [15:12] cespinal_: What updates did you install? [15:13] <___dan___> have they fixed kmail yet? [15:13] * ___dan___ moved to thunderbird when kmail 2 hit anyway [15:13] I don't remember a this point. The update manager just popped up with some updates and that was it. [15:13] kmail has always worked for me... [15:13] all and all... my system feels faster than a mac... and macs are FAST [15:13] <___dan___> ah it went downhill with version 2 [15:14] <___dan___> to the point of being unusable [15:14] cespinal_: Can you describe how did you wreck your system? [15:14] <___dan___> i hope u can still turn all that crap off in 12.04 [15:14] but yeah..since 12.04 is due in August.. I'm just dying to get my hands on rekonq 0.9 [15:14] <___dan___> akonadi, nepomuk, mysql etc [15:14] Yes. [15:14] <___dan___> april cespinal_ :) [15:15] After the update, the konsole kept showing a message saying there was no shell.. . [15:15] cespinal_: 12.04 is in April, not August [15:15] oh sorry :S [15:15] <___dan___> just remember the version number is year.month [15:15] I rebooted... and seemed that the kernel just failed to load... [15:15] <___dan___> :) [15:15] 12 (2012) . 04 (April) [15:16] <___dan___> im sure there is an echo in here heheh === edu is now known as Guest79267 [15:17] cespinal_: Did the kernel give any error message? [15:17] yes [15:17] I dont remember the error message at this point. [15:18] It just faild to load modules [15:18] failed. [15:18] cespinal_: Can you boot again and pastebin the error messages? [15:19] Nopes. I'm sorry... I took the chance to make a clean install of Mint 12 KDE just to give it a ride.. [15:33] if i understand correctly, many distros are shipping with patches that address this bug: https://bugs.kde.org/show_bug.cgi?id=275469 [15:33] KDE bug 275469 in widget-taskbar "4.7 Regression: closed windows stay in the taskbar sometimes, taskbar doesn't react on clicks" [Normal,Resolved: upstream] [15:33] if that is true, why doesn't kubuntu? [15:34] It may have been fixed in Launchpad and not in upstream [15:34] i guess i do not fully understand that [15:35] JMichaelX, yes there's a ppa to add for that fix , in launchpad [15:36] BluesKaj: that is news to me. how are people supposed to find out about such PPAs? [15:37] JMichaelX, well launchpad is the place for bug fixes in all 'buntus [15:37] BBL [15:38] BluesKaj: ty for the info [15:40] would anyone here know which PPA BluesKaj was referring to? [15:40] So... does anyone have a clue about rekonq 0.9 shipping to kubuntu 11.10? [15:40] No idea JmichaelX [15:43] Activity! === nick is now known as Guest82617 === Guest82617 is now known as Nick26 === Nick26 is now known as Nick_26 [15:47] hello people [15:49] activity! [15:49] Hello [15:50] how are you people? :P [15:50] I'm good... [15:50] everyone here is using kubuntu ? [15:51] maniX: ping [15:55] bye people [15:55] hi poeple.. short question: I just bough a radeon 6850 [15:55] everything runs perfectly well, if I use the open Source edrivers for ATI. but when I activate fglrx desktop effetcs do not work anymore [15:55] any idea? [15:57] have you used the restricted drivers? [15:58] cespinal_: yepp, I activated the fglrx driver [15:59] using jockey-kde [15:59] I mean: I can deactivate it again. but I want to use the full potential of the card [16:00] no idea :S [16:01] Hi, in KDE clock, there is a setting "special events". Does anyone know, what list is used, and is it possible to add April 26th? ( for all users ) [16:09] Oer: I assume it uses your contact list's birthdays etc [16:09] hi [16:09] Tm_T, oke, no worldwide events? [16:10] Oer: not that I know [16:10] what package should I install to have java on my kubuntu? [16:11] OpenJDK works fine with me, neo69 === vivek is now known as Guest90488 === Guest90488 is now known as pvivek [16:11] rekonq in kubuntu, who is using it [16:12] Oer: thanks [16:28] i was repairing Grub & system hanged (slow) responding. i restarted system & boot menu was there to choose. is it ok? [16:28] hi [16:28] hi [16:28] cancer: it should [16:29] just installed openjdk-7-jre and still java doesn't work on my browsers, what should I do? [16:29] Peace-: hi, i was confused because i don't know how to operate kubuntu. so just want to confirm that it's fine now. because i rebooted the pc in between repairing process. [16:32] neo69: the browser java plugin is icedtea-plugin [16:38] Sentynel: thanks [17:17] Hi, just installed beta 1 of Precise, but can't get software updates or installs ("failed to fetch...", "file format not recognized..."). [17:17] Anybody else having this problem? [17:18] Cenbe, #ubuntu+1 for that. seems to be a common issue of late === ocs is now known as faLUCE === krasni is now known as farhan_ [18:07] why debugging symbols are not included in the intall version? Why they fail many tomes during install? [18:07] *times [18:16] i.e. there was an unhandled Bugzilla error arrrgh === artao|fnord is now known as artao [18:58] is there a software based reason my ps/2 mouse would stop working? how can i troubleshoot it? [18:59] benbloom_ ? [18:59] trust? [19:00] Peace-, ? [19:00] mouse brand = trust ? [19:01] lemme check [19:01] it used to work [19:02] logitech [19:04] usb mouse works if i plug it in. current ps/2 keyboard works fine. [19:04] I've forgotten. How do you restart X? ctl-alt-backspace doesn't seem to work anymore. [19:13] Hello! I've some Problems with Kubuntu 12.04 beta and Bluetooth. Although I've activated Bluetooth in th system settings I can't connect to any of my Bluetooth devices: Samsung SGH-U800 or Logitech M55b. With Kubuntu 11.04 (on an other mashine) both work. What to do to make them work with 12.04b? (Used hardware with Kubuntu 12.04b: Asus Zenbook UX31E) [19:13] blafoo, #ubuntu+1 for that [19:15] bazhang: Thanks. [19:17] exit === jan__ is now known as Janneman [19:57] Hello! I've some Bluetooth problems. Although it is shown (in the system settings) that Bluetooth should work, it does not. I can't connect to any of my devices: mobile, mouse, other computer. Kubuntu version: 12.04b, 11.10. Hardware: Asus Zenbook UX31E [20:06] hello all [20:06] help me please [20:07] qw-Russian: Hello! What's your problem? [20:08] Whatever my packaging problems were, they seem to have disappeared now. Maybe the devs were doing something on the update servers. [20:08] i would like rename for my nick name in the system example: now i have qw@user-laptop features qw@ubuntu [20:10] qw-Russian: If you want to do it properly it's not done fast. [20:10] <[Raiden]> qw-Russian: Привет ) [20:11] [Raiden] ку [20:11] qw-Russian: Do you care of path of your home directory? Currently it should be /home/qw [20:11] qw-Russian: ??? ky??? [20:12] blafoo in Russian - ky in english - hello ) [20:12] qw-Russian: IC. Hello! ;) [20:12] blafoo i have directiry /home/qw [20:13] qw-Russian: Does it bother you if this remained? [20:13] no i would like rename second path after @ [20:15] now qw@user-laptop i would like qw@ubuntu [20:15] qw-Russian: You mean the name of the mashine? In your case user-laptop. [20:15] <[Raiden]> see /etc/hosts /etc/hostname [20:16] qw-Russian: in order to change the part after @ just go and edit the file /etc/hostname [20:16] you would also be needing root permissions for this [20:17] <[Raiden]> and /etc/hosts [20:18] it this all & [20:18] ? === JMichaelX_work is now known as GuyFox === GuyFox is now known as GuyFawkes === GuyFawkes is now known as GuyFawkesNoir === GuyFawkesNoir is now known as GuyFox === GuyFox is now known as GuyFoxMulder [20:30] I've narrowed my Bluetooth problems (BT didn't sync with other devices, 12.04b, 11.04). Meanwhile I've installed bluez-utils and libopenobex1 but now the BT-interface doesn't start up any more. hciconfig --all shows DOWN INIT RUNNING but after some seconds the state is DOWN. === GuyFoxMulder is now known as FawkesMulder === FawkesMulder is now known as FawkesBakunin === FawkesBakunin is now known as FawkesTolstoy [20:55] My computer draws really slowly. Xorg uses lots of CPU. I'm using the nvidia-current driver but don't have any compositing or effects on (a separate issue). I have 3 monitors. From googling, people say switch the qt-renderer to Raster. I did that but it won't stick. [20:56] That is, in the 'Qt Graphics SYstem' I can set it to Raster, but on logout-login, it's still set to X11/XRender. Since logging out is required to get it to start working, I don't even know if it would work if it tried. [20:56] Some people have said I can set the environment variable QT_GRAPHICSSYSTEM=raster. But that doesn't seem to work either. [20:57] That is, it's set, but it doesn't seem to have helped anything and it definitely seems to have nothing to do with the value of that setting. [20:57] So... How can I not have cripplingly slow graphics? [20:58] <[Raiden]> may be driver not installed correctly [20:58] <[Raiden]> ) [21:00] Raiden: Yeah, there are probably various issues with that. Though I've spent many hours trying to get gl to work with 3 monitors and the nvidia driver. I was hoping I could side-step the problem. Siince I have given up on hardware acceleration, I thought I'd at least try and get faster raster graphics. [21:01] But that too is seeming difficult. It's very frustrating. I want to love linux, and more specifically kubuntu, but it tries to be so unlovable in a desktop environment. === himcesjf1 is now known as himcesjf [21:13] I love it :D === sheytan_ is now known as sheytan [21:36] hey gents , til my sata cables arrive , I have to use a USB connection for an WD 1TB external drive I just setup ...what's the best File System to use for storing and retrieving files , FAT32, extX or ...? [21:37] ntfs maybe ? [21:39] I used ntfs for that as it works everywhere [21:41] right [21:53] ? [21:57] hello [21:57] is there anyone who use kde 4.8.1??? [21:57] I do! [21:57] is it stable? [21:57] Just upgraded last night. [21:57] is it worth to update [21:57] So far so good, but I've only used it one day. [21:57] I sow it is in backports :( [21:58] It depends. For me it was, there was one bug that was killing me. === massimo_ is now known as Guest62098 [21:58] what bug? [21:58] My laptop not always suspending when I shut the lid. [21:59] :( I used it all the time :( [21:59] do You know when will be released 12.04?? [21:59] April? [21:59] <[Raiden]> may be not kde bug [21:59] something more sure? [21:59] the beginning of april? [22:00] or later? [22:00] [Raiden]: It was a KDE bug. [22:00] Releases seem to be about the 20th usually. [22:00] So late April would be my guess. [22:01] so something about two month to go [22:01] so I will give a try for newest kde :D [22:01] thanks for your answers [22:02] <[Raiden]> danielo: 26 april [22:05] thanks [22:27] I like it better than the regular standard ubuntu. [22:27] hi. === cassio is now known as Guest47294 [22:37] thinktank909: you're welcome :) [22:38] I just need to get muon working and i think i'll start learning it. WIndows 8 turned me off. [22:41] ping [22:44] HELLOOOOOO [22:44] Please [22:44] someone help me [22:44] im working in Backtrack 5 and [22:44] And? [22:44] im editing some file via: "vim vars" command [22:44] and now I dont know how to exit or save the fikle [22:45] if I simply exit it it doesnt saves it [22:45] :wq or ZZ [22:45] That should save and exit if you have permissions to do so. [22:45] <[Raiden]> :) [22:45] :S [22:45] no [22:45] simply closes down = not a save === michael is now known as Guest75531 [22:45] any idea on how to work with it? [22:45] You'd have to have edit permissions, and... [22:46] !backtrack [22:46] There are some Ubuntu derivatives that we cannot provide support for due to repository and software changes. Please consult their websites for more information. Examples: gNewSense (support in #gnewsense), Linux Mint (see !mint), LinuxMCE (support in #linuxmce), CrunchBang (support in #crunchbang), BackTrack (support in #backtrack-linux), Ultimate Edition [22:46] THANK YOU! [22:46] xD [22:46] AxDSaAxDSan #backtrack-linux Cannot join channel (+b) - you are bannedn #backtrack-linux Cannot join channel (+b) - you are banned [22:46] AxDSan #backtrack-linux Cannot join channel (+b) - you are banned [22:46] AxDSan #backtrack-linux Cannot join channel (+b) - you are banned [22:46] WTF! [22:46] AxDSan: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation. [22:47] so it says: "AxDSan #backtrack-linux Cannot join channel (+b) - you are banned" [22:48] Ban against *!*root*@* matches AxDSan!~root@24.139.86.191 [22:49] AxDSan: You'd have to change your ident, and register your account with nickserv to speak. [22:49] how to do so? [22:49] im new [22:49] !nicksetup [22:49] To setup your nick so that you can be given a cloak, please follow the instructions here: http://freenode.net/faq.shtml#nicksetup [22:49] !nicksetup [22:49] !nicksetup AxDSan [22:49] ..... Read the link.... [22:50] AxDSan is now registered to blablabla, with the password blablabla. [22:50] done :D [22:51] still im banned [22:51] why the heck? [22:51] Need to complete with checking your email. and still would need to change your ident. [22:52] done [22:52] oh my [22:52] AxDSan #backtrack-linux Cannot join channel (+b) - you are banned [22:53] im going to destroy this thing [22:53] for good [22:53] As I said, now you just need to change your ident, check the settings of whatever client you have. [22:53] konversation [22:54] done? [22:54] let me see [22:54] still banned [22:54] not a clue [22:54] AxDSan: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation. [22:55] well [22:55] There you go. [22:56] done :D [22:56] ty pal [22:56] Sure. [23:09] anybody using kubuntu on macbook air and managed to get a good touchpad settings, something as good as osx? [23:10] The multitouch support isn't as good in Linux. [23:10] At least, it wasn't the last time I checked. [23:11] You can get 2 finger scrolling, but most of the other actions are not supported. [23:13] jessie: thanks for info, have that working. was hopping to get something similar to osx [23:14] aljosa: Things like 4 finger swiping? [23:15] jessie: yes, and customization for similar actions [23:16] aljosa: Yep. As far as I know, 2 finger is as much as is supported. [23:16] BTW, that's what she said. [23:21] jessie: 8-) === JMichaelX is now known as Sh0rtW4v3 [23:46] btw kudos to the kubuntu packaging team … it's great that the releases get backported so quickly nowadays <3