[16:15] <adam_112> I've setup a new frontend / backend. The tuner is an hdhomerun with CC. The PC is an Dual core running 24.2 of MythTv. The graphics card is a Nvida 8600. I can record and play fine. However, when I try to stream livetv is breaks up and I get errors. usually buffering or jump file. Anybody have any ideas. If got some log if somebody is interested.
[16:35] <rhpot1991> adam_112: using vdpau?
[16:43] <adam_112> Yes.
[16:44] <adam_112> Tried slim normal and high?  same results
[16:44] <adam_112> 2012-03-25 22:42:24.358 HDHRSH(13128D8C-0) Error: UpdateFilters called in wrong tune mode  this error appears alot.
[16:45] <adam_112> That is on the backend.
[16:46] <adam_112> Frontend is seeing this - 2012-03-25 22:42:24.060 Player(0): Waited 100ms for video buffers AAdDdLAAAAAAAAAAA
[16:46] <adam_112> 2012-03-25 22:42:24.102 Player(0), Error: Waited too long for decoder to fill video buffers. Exiting..
[16:46] <adam_112> 2012-03-25 22:42:24.060 Player(0): Waited 100ms for video buffers AAdDdLAAAAAAAAAAA2012-03-25 22:42:24.102 Player(0), Error: Waited too long for decoder to fill video buffers. Exiting..
[16:46] <adam_112> Oops sorry double posted.
[16:48] <rhpot1991> adam_112: but recordings work fine?
[16:48] <rhpot1991> could be a network issue
[16:48] <adam_112> Yes.  I can record and play.  I thought of that but why would it record then?  The HDromrun is a network device.
[16:49] <rhpot1991> same channels on both?
[16:49] <adam_112> Only doing SD right now single stream.  So the traffice streams from the HD to the Myth box.  Then either records or play as liveTV?
[16:49] <adam_112> Yes.
[16:50] <rhpot1991> once upon a time there was a bug in livetv where it detected the size incorrectly and cause the wrong deinterlacer to be used
[16:50] <adam_112> I will look at the netowkr stuff again to be sure.  I checked and am not seeing and on the network side.  Running a Cisco 2950
[16:51] <rhpot1991> you are running mythbuntu-repos?
[16:51] <adam_112> I'm running the latest version.  I downloaded the ISO and installed all the recommened updates.
[16:51] <adam_112> Would they be setup from the ISO based install?
[16:53] <adam_112> I didn't add anything from the ISO.   Running vanilla
[16:53] <rhpot1991> http://www.mythbuntu.org/repos
[16:53] <Zinn> [www.mythbuntu.org] Mythbuntu Repositories | Mythbuntu
[16:53] <rhpot1991> install that and upgrade
[16:53] <rhpot1991> to make sure you have the latest mythtv release
[16:53] <rhpot1991> then see if the issue still remains
[16:53] <adam_112> how would I set that up?  I'm not a linux guru
[16:54] <rhpot1991> click on install and it should download the deb
[16:54] <rhpot1991> then open that
[16:54] <rhpot1991> and install
[16:54] <rhpot1991> then update
[16:55] <adam_112> so click on install the Mythbunto-repos package
[16:56] <adam_112> Then apt-get install
[16:56] <adam_112> apt-get update
[16:57] <rhpot1991> sudo apt-get update
[16:58] <adam_112> yes sudo  :)
[16:58] <rhpot1991> followed by sudo apt-get upgrade
[16:58] <adam_112> d@dr^sk
[16:58] <rhpot1991> might need to sudo apt-get dist-upgrade if it leaves any off
[16:58] <adam_112> okay.  I'll try that.
[16:58] <adam_112> thanks for all the help!
[16:59] <adam_112> @ws^me!
[17:00] <adam_112> my keyboard is going wonky
[19:53] <eddief> Hi, I have a MythTV backend running under Slackware and I'm trying to use Mythbuntun on a laptop.  The frontend fails with a message saying that the timezones do not match.  How can I fix this problem???
=== mycosys1 is now known as mycosys