[00:25] <CrystalVoid> good afternoon everyone ... is it just me... or is the installer for 11.10 getting stuck trying to find a DHCP_v6 server on a network without one..?
[00:45] <pehden> http://pastebin.com/bT2mKYcp
[01:12] <mcloy> how do i setup fqdn to setup an email server?
[01:27] <pehden> help http://pastebin.com/ySbi6zgb
[01:37] <pehden> postfix/proxymap[21103]: fatal: open /etc/postfix/mysql-virtual_domains.cf: Permission denied
[01:37] <pehden> postfix/proxymap[21103]: fatal: open /etc/postfix/mysql-virtual_domains.cf: Permission denied
[02:29] <mcloy> i need postfix to just send emails from local machine by php. do i need a domain.com? and fqdn?
[02:32] <patdk-lap> to send emails, yes, you need EVERYTHING, and everything must be set correctly
[02:32] <patdk-lap> or no one will accept mail from you, or just classify it as spam
[02:33] <mcloy> so i need a .com registered? and set /etc/host and hostnames?
[02:33] <mcloy> anything else?/
[02:33] <patdk-lap> you need a valid domain name
[02:33] <patdk-lap> you need your ip address to be set with that domain
[02:33] <patdk-lap> and your domain set to that ip address
[02:33] <patdk-lap> you need to tell postfix to use that name for it's helo
[02:33] <mcloy> ok..
[02:34] <patdk-lap> it all has to match, forward, backwards, ...
[02:34] <mcloy> hm.
[02:34] <mcloy> do i need to install bind?
[02:35] <patdk-lap> http://en.wikipedia.org/wiki/Forward-confirmed_reverse_DNS
[02:35] <patdk-lap> I dunno, do you?
[02:36] <mcloy> i have bind for hosting purpose. apache runing.   hosting is good. i have amazon cloud.  i have a domain name too. postfix installed.
[02:37] <mcloy> i have endtered      A record as      mail        ip.ip.ip.ip          and then added mx record as       mail.domain.com    what next ?
[02:37] <mcloy> (is that corect by the way?)
[02:38] <patdk-lap> make sure, nslookup ip.ip.ip.ip, returns mail.domain.com
[02:38] <patdk-lap> and make sure postfix uses mail.domain.com for it's helo
[02:38] <patdk-lap> and while we are at it
[02:38] <patdk-lap> DON'T STEAL OTHER PEOPLES domain names for your examples
[02:40] <mcloy> steal ? :)
[02:40] <patdk-lap> do you own domain.com?
[02:40] <mcloy> ya
[02:40] <mcloy> i mean no
[02:41] <patdk-lap> hmm, I didn't know you where that company
[02:41] <mcloy> how to do this  and make sure postfix uses mail.domain.com for it's helo?
[02:43] <mcloy> patdk-lap,  its open-pages.com
[02:44] <mcloy> you can nslookkup
[02:45] <mcloy> patdk-lap, are you there?
[02:48] <mcloy> how to make sure make sure postfix uses mail.domain.com for it's helo
[02:55] <xpistos> Hey everyone. I need a bit of guidance. I have a program that has to go into the apache folder to stream movies to my roku box. I have apache setup, but I only get the "It Works" screen when I try to go to the page. is there a different folder than /var/www that this info should go in. I don't see htdocs that I would see in windows.
[02:55] <xpistos> thanks in advance.
[03:03] <free99> hey there... anyone know how to setup lighttpd with wordpress MU?
[03:03] <free99> I've gotten 95% of the way, but am having an issue with loading images
[04:03] <Zanzacar> can anyone help me setup audio on ubuntu server 11.10?
[04:04] <KM0201> audio>
[04:04] <KM0201> ?
[04:04] <KM0201> why would you want audio on a server?
[04:05] <Zanzacar> I have it running in my house for various media needs. I thought it would be neat to run pianobar on it so I can have pandora though my wireless headphones
[04:05] <KM0201> i have no idea on that one
[04:05] <Zanzacar> I know it isnt very conventional but I just thought it would be cool. I tried to install pulseaudio but it was requesting some libraries from X11 and what not
[04:06] <KM0201> yea
[04:15] <qman__> Zanzacar, base audio is provided by alsa, you don't need pulse unless alsa's mixing is insufficient
[04:22] <Zanzacar> qman__: I am install alsa now going to see how far that gets me
[04:58] <kieppie1> hi guys. I wanto get up to speed re virtualization re ubuntu circa 10.04 LTS, & browsed over http://blog.dustinkirkland.com/2011/10/getting-started-with-ubuntu-orchestra.html
[04:58] <kieppie1> other than this, is there any tutorials on this new manner of doing things? server & in particular virt is not very well detailed AFAIK
[07:05] <gletob> Anyone know how to get Database auth working with Squid3?
[11:17] <antares79> hi guys. quick question: does anyone else see virt-manager not updating the statistics graphs in oneiric or is it just me?
[12:09] <airtonix> it's just you
[13:31] <raydog45000> Anyone know the command or where to get a java compiler?
[13:55] <mcloy> ssh -i key.pem ubuntu@ec2-107-22-63-2.compute-1.amazonaws.com
[13:55] <mcloy> ah great
[13:55] <mcloy> that so silily of me
[13:55] <mcloy> iam using amazon cloud. and installed postfix. if i change /etc/hosts and etc/hostname . it will not cause any problem?
[14:35] <mcloy> i need help , i need to send emails by php. i have installed postfix but people say that i dont have a fqdn and no /etc/hostname and /etc/hosts valid entry.     what should i do?
[14:36] <Rapid2214> mcloy: Talk on here :) I would recommend phpmailer
[14:39] <mcloy> Rapid2214,  thanks.. :)     yes i have alread php mailer with me
[14:39] <mcloy> Rapid2214,  but the problem is that its not sending emails by postfix
[14:40] <Rapid2214> K, what error do you get?
[14:41] <mcloy> # php phpmailer.php
[14:41] <mcloy> SMTP Error: The following recipients failed: ab159ab@...com
[14:41] <Rapid2214> K, and in the postfix log?
[14:43] <mcloy> Apr  1 14:21:44 ip-10-111-31-180 postfix/local[30002]: 93F1B3D6D: to=<root@ip-10-111-31-180.ec2.internal>, orig_to=<root>, relay=local, delay=0.11, delays=0.09/0/0/0.02, dsn=2.0.0, status=sent (delivered to command: procmail -a "$EXTENSION")
[14:43] <mcloy> Apr  1 14:21:44 ip-10-111-31-180 postfix/qmgr[29413]: 93F1B3D6D: removed
[14:43] <mcloy> Apr  1 14:22:35 ip-10-111-31-180 postfix/postfix-script[30156]: fatal: the Postfix mail system is already running
[14:45] <mcloy> Rapid2214,  do i need a fqdn ? and to add and entry iin domain registrar records and in /etc/hosts and hostname fiels ?
[14:45] <Rapid2214> Okay, what version of Linux are you running?
[14:46] <mcloy> ubuntu
[14:46] <mcloy> kubuntu to be exact
[14:46] <mcloy> sory... its ubuntu serve
[14:46] <Rapid2214> K, run tail /var/mail/root
[14:47] <Rapid2214> and see if you have any messages
[14:47] <Rapid2214> Thats what happens to me when something fails
[14:48] <mcloy> tail: cannot open `/var/mail/root' for reading: No such file or directory
[14:49] <Rapid2214> K, tail -f /var/log/syslog
[14:49] <Rapid2214> While sending the email
[15:07] <mcloy> Rapid2214,  you there?
[16:03] <JamesJRH> Hello. Is this a bug?:
[16:03] <JamesJRH> james@james-ThinkPad-X60-Tablet:~$ date; sudo hwclock
[16:03] <JamesJRH> Sun Apr  1 17:02:32 BST 2012
[16:03] <JamesJRH> Sun 01 Apr 2012 16:02:29 BST  -0.922465 seconds
[16:04] <JamesJRH> Surely it should either say UTC or it should say 17:02:29.
[16:06] <JamesJRH> (For those that don't know, BST = UTC+1 = 'British Summer Time')
[16:21] <ha1dfo> hi! I'd like to use gpg to verify a signed file. I have the signature already imported to apt. which parameters hsould i use to tell gpg to use the keyrings of apt?
[16:51] <mcloy> need help with postfix send php based script email . <br />SMTP -> ERROR: AUTH not accepted from server: 503 5.5.1 Error: authentication not enabled
[16:51] <mcloy> <br />SMTP -> FROM SERVER:250 2.0.0 Ok
[16:51] <mcloy> <br />SMTP Error: Could not authenticate.
[17:13] <mcloy> RoyK,  you there?
[17:28] <JamesJRH> Is it possible for me to obtain a correct source of TAI from my system if I keep it in sync?
[17:29] <RoyK> mcloy: yep
[17:30] <mcloy> see my probleM ^
[17:30] <JamesJRH> Implementing TAI on top os UTC relies on UTC being correctly implemented. But Ubuntu seems to ignore leap seconds in it's UTC.
[17:30] <JamesJRH> of*
[17:31] <RoyK> mcloy: your own server?
[17:31] <RoyK> mcloy: you haven't defined the issue...
[17:33] <mcloy> RoyK,  ya
[17:33] <mcloy> iam using phpscript to send mail.    installed postfix and its giving the above stated error
[17:36] <RoyK> and you try to use smtp auth and smtp auth isn't enabled and you really don't need smtp auth if it's a local server so why do you use it in the first place?
[17:39] <mcloy> hm
[17:39] <mcloy> its smtpd_sasl_auth_enable      = no           already
[17:41] <mcloy> UTH not accepted from server: 503 5.5.1 Error: authentication not enabled
[18:37] <mcloy> RoyK, http://pastebin.com/qUbYFarM
[19:11] <mcloy> any help with postfix. here are my config files http://pastebin.com/qUbYFarM and here is the error  ERROR: Password not accepted from server: 535 5.7.8 Error: authentication failed: authentication failure. FROM SERVER:421 4.7.0 ip-10-111-31-180.ec2.internal Error: too many errors
[19:26] <ikonia> mcloy: the error is pretty clear, authentication, so you need to look at what you are authing against, and then check the username/password
[19:27] <mcloy> i have. i have made a user with no login. and a password. but still....
[19:27] <mcloy> ikonia, iam very disturbed since 2 days
[19:28] <ikonia> you need to look at what you are authing against and check the username and password
[19:30] <mcloy> ikonia,  i made a username as fp and passward as "xx"
[19:30] <mcloy> iam giving the same.
[19:30] <ikonia> mcloy: ok, so verify you can login as "fp" and "xx"
[19:30] <mcloy> ikonia,  i have made a system user. with no login
[19:30] <ikonia> mcloy: then that's why it won't work
[19:30] <mcloy> its a user.  no matter it cant login
[19:30] <ikonia> it does matter
[19:30] <mcloy> i see
[19:31] <mcloy>  ok tell me how to make a user again please ?
[19:31] <ikonia> mcloy: use the user admin gui
[19:31] <mcloy> ikonia,  its a server
[19:31] <mcloy> with no gui
[19:31] <ikonia> mcloy: https://help.ubuntu.com read the server guide
[19:31] <ikonia> mcloy: learn the basics
[19:32] <mcloy> ikonia,  i just forgot the command. its adduser..
[19:32] <mcloy> useradd -s /sbin/nologin pf        this is what i did ikonia
[19:33] <ikonia> you need to be able to login, create a user with a login shell, test it, then test it with postfix
[19:34] <mcloy> ikonia,  i have added user by useradd pff        then a passwd pff           then xx             still geting the error . <br />SMTP -> ERROR: Password not accepted from server: 535 5.7.8 Error: authentication failed: authentication failure         . have you seen  http://pastebin.com/qUbYFarM  et
[19:34] <mcloy> ?
[19:35] <ikonia> mcloy: can you login as the user you have just created
[19:35] <mcloy> by su ?
[19:35] <ikonia> mcloy: no, login
[19:36] <mcloy> iam on a cloud. i only login by root
[19:36] <ikonia> then login as that user
[19:36] <ikonia> instead of root
[19:36] <mcloy> k
[19:36] <ikonia> come on, think it through
[19:36] <ikonia> I ask you to login as that user to test it...I shouldn't have to tell you to then "login" to test it
[19:37] <ikonia> you're setting up a mail server, if you can't grasp simple concepts like "logging in to test a users login ability" then you shouldn't be running a mail server,
[19:37] <ikonia> it will be open to exploit and security risks
[19:38] <mcloy> yes. ican login and iam geting the same error
[19:39] <ikonia> I'm stepping away from this as I'm not comfortable helping you debug this if I have to explain to you to "login" to test a user
[19:39] <mcloy> thanks for your time
[19:39] <ikonia> I don't believe you should be trying to run a mail server and I don't think your in a position where your experience will allow you to debug it
[19:41] <mcloy> anybody else ? any help with postfix. here are my config files http://pastebin.com/qUbYFarM and here is the error  ERROR: Password not accepted from server: 535 5.7.8 Error: authentication failed: authentication failure. FROM SERVER:421 4.7.0 ip-10-111-31-180.ec2.internal Error: too many errors
[19:51] <mgw> hi, is there a way to pre-configure the install of cobbler, to prevent the configuration prompts when doint apt-get install?
[19:53] <yeats> mgw: you might want to investigate 'debconf-set-selections'
[19:55] <mgw> yeats: thanks, looking
[20:40] <xpistos> can someone give me a hand with this - I can take the same path way and use it to mount with "mount -t nfs 11.10.19.100:/data/Comics/My\ Comics /home/x/Data/My\ Collection" but not in fstab for some reason
[20:41] <xpistos> "11.10.19.100:/data/Comics/My\ Comics /home/x/Data/My\ Collection	nfs	rw,hard,intr	0	0" doesn't seem to wor
[20:41] <xpistos> +k
[20:42] <guntbert> xpistos: in what way?
[20:46] <xpistos> guntbert: I can manually use the "mount -t nfs PATHWAY" and it mount to the folder but if I put it in fstab, it gives me an error
[20:46] <guntbert> xpistos: tell us the error please
[20:46] <xpistos> retrieving
[20:47] <xpistos> [mntent]: line 26 in /etc/fstab is bad
[20:47] <xpistos> the line is '11.10.19.100:/data/Comics/My\ Comics /home/x/Data/My\ Collection	nfs	rw,hard,intr	0	0'
[20:47] <xpistos> where ip is my server the first is the pathway to my nfs share in exports and the second is my target folder
[20:48] <xpistos> the same path will work when I do so manually with the "mount -t nfs " command
[20:48] <guntbert> xpistos: I'd suspect the blanks, but I may err...
[20:49] <xpistos> let me try that to test
[20:49] <guntbert> xpistos: else try with less options.... (maybe there is a syntax error)
[20:51] <xpistos> guntbert: it was the blanks. I never had trouble with that before strange. But Not a problem. Thanks for seeing that.
[20:52] <xpistos> guntbert: I don't suppose you know the default folder to apache do you?
[20:52] <guntbert> xpistos: glad you made it - I avoid blanks in all file systems (old school)  -  look in /etc/apache2
[20:53] <xpistos> guntbert: LOL. I will keep that in mind from now on!
[20:53] <guntbert> :)
[21:20] <xpistos> what is httpd called in ubuntu?
[21:20] <RoyK> apache
[21:20] <xpistos> cause i installed apached and I can't run httpd -S
[21:20] <xpistos> but I can run apachectl -S
[21:20] <RoyK> apache2
[21:21] <RoyK>  /usr/sbin/apache2
[21:21]  * RoyK seems to be going north for some work, to ny-ålesund, svalbard :D
[21:23] <xpistos> how would I fix this error? apache2: bad user name ${APACHE_RUN_USER}
[21:23] <RoyK> start apache with apache2ctl
[21:23] <xpistos> apache2ctl restart?
[21:24] <RoyK> aye
[21:24] <xpistos> apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
[21:25] <xpistos> this is on the localhost
[21:25] <RoyK> doesn't matter
[21:26] <RoyK> also, IIRC you can override that
[21:26] <RoyK> but still, it doesn't matter much
[21:27] <xpistos> so I am guessing it isn't actually restarting
[21:27] <RoyK> that's not an error message
[21:27] <RoyK> it's merely a warning
[21:27] <xpistos> oh
[21:28] <RoyK> set ServerName (and perhaps ServerAlias) to get rid of that
[21:32] <xpistos> well I am still getting the error message
[21:33] <RoyK> it's not an error message
[21:37] <yeats> xpistos: APACHE_RUN_USER is set in /etc/apache2/envvars, so you might want to check that file