[00:39] <agoodm> When I am trying to compile wine 32bit from source on 12.04 I am running into an error: configure: error: Cannot build a 32-bit program, you need to install 32-bit development libraries.
[00:39] <agoodm> presumably I do not have build dependencies installed... but dont understand which I am missing...
[00:39] <scar3crow> ia32libs
[00:40] <agoodm> ia32-libs is already the newest version.
[00:40] <agoodm> this is on x64
[00:40] <scar3crow> :-/
[00:42] <scar3crow> sudo linux32 <command>
[00:43] <agoodm> bingo what is that doing?
[00:44] <Loshki> agoodm: actually, this http://wiki.winehq.org/WineOn64bit makes it sound particularly difficult from 12.04/64 bit ubuntu....
[00:44] <scar3crow> making your system think it's 32bit
[00:44] <agoodm> weird :D
[00:44] <agoodm> :S!!
[00:44] <agoodm> i say bingo, im counting my chickens before theyve hatched
[00:44] <agoodm> its taking longer this time :P
[00:44] <scar3crow> lol
[00:45] <agoodm> configure worked linux32 make -j 4 is now running
[00:45] <agoodm> this is toasting my leg now :(
[00:45] <agoodm> fairly powerful laptop is great on your lap till you tax the cpu...
[00:46] <scar3crow> heh
[00:46] <agoodm> im told this x220 isnt too bad compared to others re case temps under load but the back left is sure not comfy
[00:51] <agoodm> the build is going OK but the executable its made wont run
[00:52] <agoodm> says could not locate wine build tree
[00:52] <agoodm> that was @ scar3crow
[00:52] <scar3crow> sorry
[00:53] <scar3crow> beyond that I cannot help you
[00:53] <agoodm> kk cheers
[00:53] <scar3crow> which version of wine? (1.4)
[01:08] <agoodm> scar3crow, 1.4
[01:08] <agoodm> i think
[01:09] <agoodm> I believe I need a specific patch to make swtor work in wine
[01:09] <agoodm> hence jumping through these hoops...
[01:10] <scar3crow> what's swtor?
[01:10] <agoodm> star wars the old republic
[01:11] <agoodm> http://appdb.winehq.org/objectManager.php?sClass=version&iId=25022
[01:11] <scar3crow> gotcha
[01:11] <agoodm> as you see on appdb it says I need a specific patch; ive downloaded the code as per what it says
[01:11] <agoodm> using linux32 ive configured and 'maked' the wine executable
[01:12] <agoodm> however the executable cant run
[01:12] <agoodm> also tried sudo make install with and without linux32 and the install fails
[01:12] <Logan_> agoodm: /join #winehq for application-specific support
[01:13] <scar3crow> have you tried linux32 winecfg?
[01:15] <agoodm> scar3crow, just now - loads the winecfg util - the one ubuntu installed itself
[01:15] <scar3crow> hmmm and your game will not run, eh?
[01:16] <agoodm> the launcher runs and works fine
[01:16] <agoodm> I login and click to play launcher dissapears and then nothing happens
[01:16] <agoodm> swtor.exe is running but never comes up
[01:26] <HelenB> :o
[01:26] <HelenB> Okay
[01:26] <HelenB> hmm
[01:26] <HelenB> right yes
[01:26] <HelenB> okay
[01:26] <BarkingFish> You're doing it again :)
[01:27] <HelenB> I installed kubuntu 12.04 Beta 2 and I found I've no wifi.
[01:28] <HelenB> So I went to additional drivers and installed drivers for bsm43xx chipset series but it failed to install.
[01:28] <HelenB> Is this a bug in beta?
[01:29] <BarkingFish> broadcom wireless needs drivers and firmware to work properly, HelenB - it's possible you installed in the wrong order, maybe.
[01:29] <HelenB> Has anyone else come accross this and found a work around?
[01:29] <HelenB> BarkingFish, Installed what in the wrong order?
[01:29] <BarkingFish> We get a lot of questions about broadcom wireless, which is why I was gonna send you to the link, but you say you've already been there
[01:30] <BarkingFish> sometimes one package won't install if you don't have another one it needs
[01:30] <HelenB> It worked in Ubuntu 11.10 and under so I thought it may be a beta bug.
[01:30] <BarkingFish> and occasionally they miss realising that they need another package, and don't download it
[01:31] <HelenB> hmm.
[01:31] <HelenB> Ubuntu website doesn't say anything about additional packages for the drivers.
[01:31] <BarkingFish> I will get you to check the link again - if it's the same page, you tried before, don't worry - we'll try and find you another way out
[01:31] <BarkingFish> !bcm43 | HelenB
[01:32] <BarkingFish> has someone deleted the bcm links from Ubottu?
[01:32] <BarkingFish> !bcm43xx
[01:32] <HelenB> lol
[01:32] <BarkingFish> no. I thought so.
[01:32] <BarkingFish> I wish i could remember the triggers :)
[01:33] <HelenB> been there
[01:33] <strontium> im trying to run X on ubuntu 12.04 server as Dom 0 with Xen and all I get is an "illegal instruction" error and a backtrace on the xorg log.  X works fine when i run the same setup but not under Xen.  This is using the opensource radeon drivers.
[01:34] <etfb> D'oh! I just disabled Compiz and now I have no user interface, just a blank desktop.  How do I reenable it?
[01:35] <HelenB> BarkingFish, I been to that link before.
[01:35] <HelenB> I also re read it just now.
[01:36] <etfb> Used the Compiz settings manager. I was trying to turn off as much CPU-hogging rubbish as possible, but it appears the whole Unity interface relies on that now, so now there's no sidebar, no menu, no keyboard shortcuts - nothing. Just a background and a mouse cursor.
[01:36] <BarkingFish> ah, ok.  Well as far as I'm aware, to get broadcom wireless to work, there are things you need to do, like extracting the firmware and putting it somewhere, and so on.  I can't remember all of the steps though, so I may not be the best person to help you
[01:36] <HelenB> Hey hey hey
[01:36] <HelenB> Fuck it
[01:37] <strontium> etfb you could drop unity and go lxde of xfce if you dont want the candy
[01:37] <HelenB> reverting back to 11
[01:37] <HelenB> :3
[01:37] <bazhang> HelenB, no cursing
[01:37] <Logan_> !language | HelenB
[01:37] <HelenB> bazhang, Eh? My cursor is fine! :3
[01:37] <bazhang> HelenB, you know quite well what I mean
[01:37] <HelenB> bazhang, Erm...
[01:37] <HelenB> No I don't?
[01:38] <bazhang> HelenB, no foul language.
[01:39] <etfb> strontium: right now I don't even have the ability to type, so that maybe a bit beyond me...
[01:39] <etfb> What's the executable name of the compiz settings manager?
[01:40] <HelenB> bazhang, kay
[01:40] <Fyodorovna> etfb, in a terminal ccsm
[01:45] <strontium> has anyone managed to get X to run on a ubuntu 12.04 dom 0 under Xen?
[01:46] <jtreminio> Hi all! How would I go about installing 12.04, and installing gnome-shell, but making sure gnome-shell doesn't upgrade to 3.4?
[01:47] <bazhang> !pinning | jtreminio
[01:48] <bazhang> jtreminio, that may or may not work though for a version upgrade, I'd suspect it will not, at all.
[01:48] <jtreminio> ah. oh.
[01:48] <linuxuz3r> hi
[01:48] <linuxuz3r> release date of the next ubuntu?
[01:49] <jtreminio> 24th, iirc.
[01:49] <linuxuz3r> next week nice
[01:49] <bazhang> 26th or thereabouts
[01:49] <jtreminio> it's right there in the topic
[01:49] <linuxuz3r> what s new in 12.04
[01:50] <bazhang> !notes
[01:50] <bazhang> whoa that needs an update
[01:52] <GraemeLion> linuxuz3r: Lots of cool fun things.  Besides having software packages updated, there's also unity updates, as well as things https://wiki.ubuntu.com/PrecisePangolin/ReleaseNotes
[02:11] <strontium> Is anyone successfully running Ubuntu 12.04 as Dom0 on Xen?
[02:45] <jtrucks> immortal on
[02:55] <pepee> hi. for some reason, dhclient is not setting routes automatically. I've made lots of changes to my system since a long time ago, so could be something I did. what can I do?
[02:58] <pepee> err it works when I use it from the console, but it doesn't when rebooting
[03:17] <pepee> it's a bad idea to recommend people to install precise to check if fixes things
[03:17] <pepee> ?
[03:28] <snadge> no
[03:28] <snadge> precise is almost released anyway.. and its an lts
[03:29] <snadge> not to mention it already sucks way less than 11.10 does
[03:29] <snadge> it claimed that trophy months ago :p
[03:29] <snadge> 11.10 should've been called.. turdy turdburger
[03:30] <pepee> bah, I have 1 more bug than I had had with 11.10
[03:30] <snadge> or the release which drove everyone to linux mint
[03:30] <snadge> or fedora etc :P
[03:30] <pepee> I have just one bug, but it's annoying
[03:31] <snadge> what is it
[03:31] <pepee> https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-synaptics/+bug/962704
[03:35] <snadge> oh that blows
[03:35] <snadge> i have an acer aspire netbook, which doesnt do that
[03:35] <snadge> dont get me started about xorg updates though.. and how they go out of their way to break shit
[03:35] <snadge> by implementing new features/functionality that nobody gives a crap about
[03:36] <snadge> and then just nonchalantly saying everyone should update their drivers/code .. because they broke something
[03:37] <snadge> to be fair to them.. thats not specific to xorg.. its specific to linux in general
[03:37] <snadge> thou shalt go out of their way to break binary compatibility between all updates, no matter how minor they are ;)
[03:37] <pepee> haha
[03:38] <snadge> because nobody has anything better to do.. than track the latest bleeding edge upstream code.. just to make sure something they wrote, still works
[03:38] <pepee> well, yes, it's random breakage
[03:38] <pepee> for fun
[03:39] <snadge> are you jacob? :p
[03:40] <snadge> launchpad needs a like button
[03:40] <snadge> or a thanks button
[03:41] <snadge> and maybe upvoting/downvoting ;)
[03:41] <pepee> snadge, yes, I'm using a bugmenot account...
[03:41] <snadge> so it can be more like facebook/reddit
[03:41] <pepee> hehe
[03:43] <pepee> one should report anonymously
[03:44] <snadge> i dont believe that
[03:44] <snadge> maybe if you were wanted for tax fraud, or multiple homicides or something
[03:45] <snadge> but contributing to bug reports for ubuntu.. isnt like coming out of the closet in iran
[03:45] <snadge> theres no real reason to conceal that.. unless, maybe you worked for redhat or something
[03:45] <pepee> I don't like to have an ID/multiple IDs for everything I do in the webs
[03:46] <pepee> that's why I don't like forums
[03:46] <pepee> could be an alternative
[03:46] <snadge> i dont like forums because im lazy.. but i tend to use my real identity when id o
[03:47] <pepee> there is no real ID in the internet hehe
[03:47] <snadge> gmail has excellent filters if i ever need to use them.. which i havn't, for spam anyway
[03:50] <roasted> :D
[03:51] <pepee> d:
[04:13] <DrManhattan> the daily build of 12.04 32 bit alternate picks up NVraid hardware raid1 just fine
[04:13] <DrManhattan> good job supporting obscure fecal hardware
[04:14] <pepee> lol
[04:42] <snadge> hrm.. have to spec 2 new systems for work
[04:42] <snadge> im not an intel person.. they make me puke.. but im looking at intel stuff
[04:42] <snadge> it seems ivy bridge just got released
[04:43] <snadge> not sure if i should care or not.. but the GPUs are allegedly way better
[05:07] <DrManhattan> wow - I have a minimal install going, 179 megs of ram
[05:07] <DrManhattan> very impressive!
[05:17] <lotuspsychje> !info kazam
[05:17] <BlueClaw> I have a fresh install of 12.04 here. I tried to install "Mate 1.2" (a window manager used in mint). After installing it per the Mate webpages intructions nothing changed. I am assuming I am missing a vital step to switch to the new appearance? I had also installed Gnome and Metacity.
[05:19] <lotuspsychje> blueclaw, did you test gnome classic on precise?
[05:19] <lotuspsychje> (sorry not related to your prob)
[05:19] <lotuspsychje> !info mate
[05:21] <BlueClaw> lotuspsychje: not sure what you mean. I haven't used linux of a few years.. I think 3 years or so. Before Unity.
[05:21] <lotuspsychje> BlueClaw: when u log out, precise should have gnome classic again, before unity was default only
[05:22] <lotuspsychje> i wanted to know if classic runs smooth
[05:22] <BlueClaw> kk I will try relogging in, to see if anything changes.
[05:22] <lotuspsychje> you have to choose desktop from there
[05:22] <lotuspsychje> oh
[05:24] <BlueClaw> Nothing seems different. Still the same look as when I first installed. Aside from grub which has a "debian" background
[05:25] <BlueClaw> lotuspsychje: is there a program to switch which window manager is active?
[05:25] <lotuspsychje> yeah but did you choose another desktop manager at login?
[05:25] <lotuspsychje> default is unity
[05:26] <lotuspsychje> if you want another, type your login name
[05:26] <lotuspsychje> then choose desktop
[05:26] <BlueClaw> humm I didn't see an option. I will give it a look, brb again
[05:35] <lotuspsychje> wb
[05:35] <BlueClaw> lotuspsychje: thanks, in gnome classic now.
[05:35] <lotuspsychje> nice
[05:36] <BlueClaw> want me to check anything in particular?
[05:36] <lotuspsychje> no tnx mate ill chack myself at release
[05:36] <lotuspsychje> i like wobbly windows and stuff
[05:37] <lotuspsychje> so 'mate' is also a desktop manager?
[05:37] <jtreminio> I want to install gnome-shell 3.2 in 12.04, but the only available package is 3.4. Is there anyway to rollback?
[05:37] <BlueClaw> yeah, I tried using it first. I moved the top bar to the bottom with the other one, and made one auto hide, at the point I couldn't acces either and had to force shutdown the computer :(
[05:38] <lotuspsychje> ic
[05:39] <BlueClaw> in xcaht how do you disable the notifications for entering and existing the channels?
[05:42] <EvilResistance> BlueClaw, right click the channel, and in the context menu "Settings" > Hide join/part messages
[05:43] <EvilResistance> you have to set that per-channel though
[05:43] <BlueClaw> EvilResistance: Thanks mate.
[05:43] <EvilResistance> FYI: #xchat for xchat support, since not everyone on Ubuntu uses xchat
[05:44] <BlueClaw> lotuspsychje, gnome classic seems to run very smooth for first impressions. The one thing I miss from unity is the quick search for programs. Anything like that in gnome?
[05:45] <jtreminio> BlueClaw, gnome-do
[05:45] <lotuspsychje> tnx for feedback
[05:46] <BlueClaw> EvilResistance, thanks, I will keep that in mind if I got more xchat questions. btw, I am very new to IRC, is there an etiquette page you would suggest? I notice not a lot of people say "Thanks" I assume there is a reason? Not to flood or another reason perhaps.
[06:03] <snadge> grrrrr fuuuuu unity just crashed
[06:03] <snadge> and f%#$ing gedit doesnt do crash recovery
[06:03] <snadge> that angers me
[06:05] <snadge> i must remember to press ctrl-s every keystroke because unity is a pile of crap
[06:06] <scar3crow> will a server image be available post beta?
[06:12] <Volkodav> Did anyone notice that the layout option in xfce does not save over reboot? I think I should file a bug
[07:04] <fishcooker> i don't have window manager.. i want to set the monitor resolution by command line
[07:04] <fishcooker> is there any apps or command to do this
[07:07] <MechanisM> hey how to fix system settings? it's won't open
[07:29] <dekela> trying to get multi-monitor on 12.04, macbook pro nvidia
[07:29] <dekela> I want to have the external monitor open when I close the lid and the macbook pro monitor to shut down
[07:29] <dekela> Nvidia Driver is installed
[07:30] <dekela> Anyone?
[07:44] <topyli> attempting to apt-get upgrade, apt gives me: E: Internal Error, No file name for gcc-4.6-base
[07:46] <elijah> Can someone help me apply this patch here? https://bugs.launchpad.net/ubuntu/+source/libdvdnav/+bug/934471
[08:02] <gnomefreak> ahhhhh nice and quiet in here :)
[08:03] <dupondje> AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
[08:03] <dupondje> :)
[08:03] <dupondje> hihi
[08:04] <gnomefreak> hi
[08:04] <dupondje> Its almost friday today :)
[08:05]  * gnomefreak smoke in rain brb
[08:16] <gnomefreak> it seems like the longer asunder runs the slower it gets
[08:19] <dekela> trying to get multi-monitor on 12.04, macbook pro nvidia
[08:19] <dekela> I want to have the external monitor open when I close the lid and the macbook pro monitor to shut down 10:29:44 AM
[08:19] <dekela> Nvidia Driver is installed
[08:49] <saji89> Hi, I was trying to connect to windows active diretory in precise pangolin beta, using likewise open. I got connected and was able to login as windows domain user. But after restart I was unable to login as a windows domain user.
[08:49] <saji89> Any idea how to solvethis?
[09:40] <saji89> Hi, I was trying to connect to windows active diretory in precise pangolin beta, using likewise open. I got connected and was able to login as windows domain user. But after restart I was unable to login as a windows domain user.
[09:54] <Parufito> Hi all! I've installed Ubuntu 12.04 Beta with Gnome Classic. And with that, the UpdateManager doesn't run in background, anybody knows how to activate that?
[10:07] <_tasslehoff_> When I create a new partition in the Alternate installer, isn't the first thing it should ask me if I want primary or logical?
[10:21] <tokinwhiteman> hey can someone tell me where to find the release notes for the latest kernel 3.2.0-23-generic?
[10:35] <FauxFaux> I'm using unity-2d.  I'd like to be able to move my mouse between screens without it being /pointlessly/ trapped (as I have only one launcher, at the perimeter).  Internets suggest dconf-editoring the com.canonical.unity-2d.launcher settings; I've made it better but I can't work out what permutation of settings makes it not stop the cursor at all.  Any guesses?
[10:37] <FauxFaux> Setting the edge-stop-velocity to -1 fixes the edges of the monitor, but prevents revealing the (auto-hidden) launcher with the mouse.. closer to what I want, I guess. :s
[10:54]  * FauxFaux finds #946104; right.
[11:00] <arune> god day to you all
[11:00] <arune> my first testing of 12.04 desktop
[11:01] <arune> is it just me or doesnt alt+f10 maximize the current application anymore? is there a better keyboard shortcut?
[11:04] <philinux> arune: hold down any Win key to see all shortcuts
[11:11] <arune> philinux: thanks
[11:12] <arune> just need to remember when on different computers running different versions :/
[11:12] <arune> the keyboard shortcut list is great though!
[11:29] <midhuno> webcam not detecting since i updated to 12.04 what to do?? help me
[11:31] <midhuno> anybody help me pls:(
[11:33] <midhuno> webcam not detecting since i updated to 12.04 what to do?? help me
[11:35] <midhuno> no video lens on ubuntu now
[11:35] <midhuno> anybody help
[11:50] <philinux> midhuno: cant help with cam but video lens still ok here
[11:53] <zozy> anybody using nvidia driver here?
[11:53] <zozy> (with an extrernal monitor)
[11:59] <philinux> zozy: only on a desktop
[12:00] <arune> midhuno: did you upgrade or new installation?
[12:12] <zozy> philinux: and how did you got it to work correctly? i tried to get x to use the nvidia driver, but it ignores it
[12:14] <philinux> zozy: I did a clean install and use nvidia-current from jockey
[12:16] <Lint> does the phrase ¨Open in Files¨ make sense for you?
[12:16] <zozy> philinux: thx, i'll try
[12:17] <philinux> zozy: what does apt-cache policy nvidia-current say
[12:18] <philinux> Lint: in what context
[12:18] <Lint> ¨Open in Nautilus¨ had. That one HAS NOT.
[12:19] <philinux> Lint: ah right click on a folder I see now.
[12:22] <philinux> Lint: I usually just double click on a folder
[12:29] <zozy> philinux:
[12:29] <zozy> nvidia-current:
[12:29] <zozy>   Installed: 295.40-0ubuntu1
[12:29] <zozy>   Candidate: 295.40-0ubuntu1
[12:29] <zozy>   Version table:
[12:29] <zozy>  *** 295.40-0ubuntu1 0
[12:29] <zozy>         500 http://hu.archive.ubuntu.com/ubuntu/ precise/restricted i386 Packages
[12:29] <zozy>         100 /var/lib/dpkg/status
[12:29] <zozy>      295.33-0ubuntu1~precise~xup1 0
[12:29] <zozy>         500 http://ppa.launchpad.net/ubuntu-x-swat/x-updates/ubuntu/ precise/main i386 Packages
[12:31] <FauxFaux> https://bugs.launchpad.net/ayatana-design/+bug/946104 comment 23-25 is the end of my question above.
[12:37] <philinux> zozy: to save reinstallinf I would purge it and remove the ppa then install it from the ubuntu repo
[12:39] <zozy> i'll check the official driver out
[12:39] <zozy> th
[12:39] <zozy> x
[12:46] <FreeRun> hi
[12:46] <FreeRun> from few days i have a big problem with xorg, compiz and unity under 12.04 desktop
[12:47] <FreeRun> xorg utilize 100% of cpu
[12:47] <dustinspringman> i have a question, but i don't know how to ask google to get the response I need... hopefully you guys can point me to the "keyword" I am after.. The question: I want to have all my apps restore on boot *in the exact same location* every time.. I've got FFox, Chrome, Pidgin, and PSensor all in the startup list.. that works, but its like an explosion when I boot and have to take 10mins getting everything situated.. what wou
[12:48] <gnomefreak> anyone else notice if there box doesnt shut down?
[12:49] <FreeRun> and graphic card generates artefacts, i have duakl boot on mac book pro and ubuntu makes something wrong with gpu, coz after freeze, when i must to reboot (shutdown) computer and tryiun to boot in safe boot in os x, artifacts from gpu are visible :| and os hanging during boot
[12:49] <dustinspringman> gnomefreak: Mine wont reboot, but I got it to shut down by upgrading my dell bios to A07
[12:49] <FreeRun> after 3 times of starting in safe mode everything works fine\
[12:49] <FreeRun> help :)
[12:50] <gnomefreak> dustinspringman: oh thanks
[12:50] <gnomefreak> FreeRun: other than to tell you to try use other drivers i dont have a clue
[12:51] <dustinspringman> gnomefreak: the not rebooting thing is a pain, but since I got it shutting down, at least I can do that and just power it back on.. =D
[12:51] <gnomefreak> i can reboot just fine its just on shutdown that in hangs on plymouth
[12:51] <murlidhar> am having trouble updating the repos now .... its a fresh installation .. http://pastebin.com/HFaNDgyT
[12:52] <murlidhar> can anyone help me find the solution for it.
[12:52] <FreeRun> system freezing after few seconds of boot and screnn start to blinking artifacts starts...
[12:52] <dustinspringman> gnomefreak: hah... i have the same thing.. only on reboot.. =D
[12:53] <gnomefreak> murlidhar: pastebin your whole /etc/apt/sources.list file
[12:53] <murlidhar> okies
[12:54] <gnomefreak> murlidhar: also when you post output of a command please post all of it including the command
[12:56] <murlidhar> http://pastebin.com/nb4qJZMj gnomefreak
[12:57] <cento> hi
[12:57] <cento> how to sync thunderbird contacts and ubuntuone, on 12.04 (new UbuntuOne client don't have old options)
[12:57] <cento> ?
[12:58] <gnomefreak> murlidhar: instead of using in. use gb.  so just change all the in to gb and than run update see if it helps
[12:58] <gnomefreak> cento: IIRC that is not a free sevice
[12:58] <murlidhar> gnomefreak: err i didn't understand what you said.
[12:58] <gnomefreak> murlidhar: on each of the repos do you see the letters in?
[12:59] <murlidhar> ah . ok got it.
[12:59] <gnomefreak> murlidhar: change them to gb
[12:59] <murlidhar> u mean i change the servers to gb from in ?
[12:59] <gnomefreak> murlidhar: yes
[12:59] <cento> gnomefreak, i think the android app is not free
[12:59] <murlidhar> you*
[12:59] <cento> but I speak about thunderbird->couchDB sync
[12:59] <cento> old UbuntuOne Client allow it, and now?
[13:00] <gnomefreak> cento: i know what you said and i am fairly sure it is not free. try asking in #ubuntuone
[13:00] <cento> ok thanks
[13:00] <gnomefreak> i think thats the channle
[13:01] <gnomefreak> murlidhar: did you run update again yet?
[13:03] <murlidhar> gnomefreak: doing it
[13:03] <gnomefreak> k
[13:04] <philinux> cento: > Maybe you've seen this. > http://askubuntu.com/questions/117208/how-to-sync-ubuntu-one-contacts-with-thunderbird
[13:04] <murlidhar> nopes didn't work gnomefreak
[13:04] <gnomefreak> murlidhar: ok do you know how to retrieve a gpg key signature?
[13:04] <cento> philinux, already done
[13:05] <cento> it say that maybe don't work.
[13:05] <murlidhar> gnomefreak: http://pastebin.com/LdTK8D1J
[13:05] <cento> but don't say why
[13:05] <murlidhar> gnomefreak: guess i need your help in retrieving that .
[13:06] <philinux> cento: maybe a bug in thunderbird-couchdb
[13:07] <philinux> cento: ask in #ubuntuone
[13:07] <cento> philinux, already asked, no answere
[13:07] <murlidhar> gnomefreak: ppa can be ignored i think but the other ones i don't know what to do about it. funny that the update manager says that my repos have last been updated 8 days ago ( the day i did a fresh installation of precise )
[13:09] <FreeRun> what is the best driver for nvidia 8600gt (mobile) ?
[13:10] <FreeRun> with nvidia driver everything goes crash
[13:10] <gnomefreak> murlidhar: type the command i give you including the - at the end of it. command as follows:
[13:10] <murlidhar> okies
[13:10] <murlidhar> go on
[13:11] <gnomefreak> gpg --recv 3E5C1192 && gpg --export -a 3E5C1192 | sudo apt-key add -
[13:11] <gnomefreak> murlidhar: and when i asked for the full /etc/apt/sources.list file i meant all of them (not leave out the ppas)
[13:12] <murlidhar> its not in the sources.list
[13:12] <murlidhar> its somewhere else i think.
[13:12] <murlidhar> gpg: keyserver receive failed: bad URI
[13:12] <gnomefreak> murlidhar: after you run that command post the output of apt-get update again in pastebin
[13:12] <gnomefreak> ok
[13:13] <gnomefreak> damn hold on let me see if i can find the command.
[13:13] <philinux> cento: just keep your system up to date it might get fixed soon
[13:13] <murlidhar> ok
[13:13] <murlidhar> its raining here now and i think we will have a power failure here soon :(
[13:14] <murlidhar> jeez!
[13:16] <gnomefreak> murlidhar: the following command might help:
[13:16] <murlidhar> ok
[13:16] <gnomefreak> sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 40976EAF437D05B5
[13:17] <elijah> Does anyone have netbeans 7.1.1. installed on 12.04, I just installed and the menu items are very dark, there is no contrast
[13:17] <murlidhar> gnomefreak: doing the update now
[13:17] <murlidhar> hopefully should be working fine now
[13:17]  * gnomefreak not entirely sure what netbeans is and im thankful for that
[13:17] <murlidhar> an IDE ?
[13:17] <gnomefreak> murlidhar: did it give you the key?
[13:18] <murlidhar> gnomefreak: you gave the command to recover the keys
[13:18] <gnomefreak> murlidhar: did it work
[13:18] <murlidhar> well no :(
[13:18] <gnomefreak> murlidhar: it will only fix one key
[13:18] <murlidhar> hmmm
[13:19] <gnomefreak> murlidhar: give me the full output of the key command i gave you
[13:19] <murlidhar> ok
[13:20] <glosoli> what is TouchPad Sensitivity exactly responsible of in Sys Settings ?
[13:21] <murlidhar> gnomefreak: http://pastebin.com/eBaGnwBh
[13:23] <gnomefreak> murlidhar: that is odd. it downloaded the key for you but didnt fix the error for that key error
[13:23] <murlidhar> :|
[13:23] <gnomefreak> murlidhar: im not sure how to help you since that didnt work
[13:23] <murlidhar> gnomefreak: can we reset the repos thingy ?
[13:25] <gnomefreak> murlidhar: reset?
[13:26] <murlidhar> deleting the sources.list and creating a new one from scratch ?
[13:26] <gnomefreak> "repo thingy" doesnt mean anything to me
[13:26] <gnomefreak> murlidhar: you can i can post one for you if you like
[13:26] <gnomefreak> one that works :)
[13:27] <murlidhar> :)
[13:27] <murlidhar> sure
[13:27] <murlidhar> lets try that too
[13:28] <gnomefreak> murlidhar: http://paste.ubuntu.com/936884/   for now only use this list
[13:29] <gnomefreak> brb smoke
[13:30] <murlidhar> gnomefreak: http://www.tuxgarage.com/2011/01/restore-your-sources-list-to-defaults.html
[13:30] <murlidhar> have a look at this
[13:30] <murlidhar> might help us ?
[13:37] <gnomefreak> murlidhar: you just want the official ones for right now. i never trusted that list generator so i make my own list. you can do as you like but i would fix the official first before you add anything else
[13:37] <murlidhar> ok
[13:39] <FreeRun> ok, another problem... xorg utilize 100% of cpu
[13:39] <murlidhar> i have disabled the ppas as of now and doing the update
[13:40] <FreeRun> even in dwm when i'm running a gui application
[13:40] <gnomefreak> murlidhar: do you still have the link to your old sources.list file?
[13:41] <murlidhar> i have backed it up .
[13:41] <gnomefreak> murlidhar: nevermind i was hopinhg to take a look at something but what you pasted only had official repos to it
[13:41] <murlidhar> yes
[13:42] <gnomefreak> s/hopinhg/hoping
[13:42] <murlidhar> i have disabled the ppas
[13:43] <gnomefreak> murlidhar: you may need to go into ubuntusoftware center or synaptic or something like that to unmark the non-official ones
[13:43] <murlidhar> nah you can unmark it from the update manager by clicking the settings
[13:43] <gnomefreak> i wanted to look at the extra(name) one
[13:44] <murlidhar> ah ok. but how do i pastebin it ?
[13:44] <gnomefreak> or update-manager. they give you same results
[13:44] <murlidhar> they give me no errors or warnings when i do it from the update manager
[13:45] <murlidhar> its only that the update manager says that on the top side that the repos have been updated 8 days back
[13:45] <murlidhar> incidently i did a fresh installation of the distro 8 days back
[13:46] <murlidhar> its really odd and getting on my nerves :|
[13:46] <gnomefreak> so use update-manager to update now see if it helps
[13:47] <murlidhar> funny thing is it is showing updates and installing it too as and when the repos get  updated !!!!
[13:47] <gnomefreak> i really dont know what you did but something is off
[13:47] <murlidhar> i didn't do anything except adding a few ppas
[13:47] <murlidhar> haven't had too much time to sit on my desktop these days
[13:48] <gnomefreak> where did you get the ubuntu extras repo?
[13:48] <psypher246> hello all, is there anyone who can assist. Compiz expo has just completely broken my unity setup. i am unable to laucnh the dash with super key (randomly works) and cannot right lcik on a desktop at all
[13:48] <murlidhar> gnomefreak: not sure :|
[13:48] <murlidhar> i have disabled it now .
[13:49] <gnomefreak> murlidhar: here is the error you were getting http://www.webupd8.org/2010/10/fix-nopubkey-error-for-extras-ubuntu.html
[13:49] <gnomefreak> murlidhar: oh i found it easy
[13:50] <philinux> psypher246: probably unity --reset
[13:50] <psypher246> did that already
[13:50] <philinux> psypher246: blow away the .compiz folders
[13:50] <gnomefreak> well only for 10.10 :(
[13:51] <psypher246> philinux: in my home? i got .compiz-1/
[13:51] <philinux> psypher246: logou then in or unity --replace
[13:51] <murlidhar> disabling the extra repos is now working good for me.
[13:51] <psypher246> that one?
[13:51] <mvo> murlidhar: it usually means that one of your sources.list entries can not be reached, does "sudo apt-get update" in a terminal give you any errors?
[13:51] <philinux> psypher246: checking mine
[13:52] <murlidhar> gnomefreak: the update manager now says that the repos have just been updated !
[13:52] <philinux> psypher246: prolly the one in .config
[13:52] <murlidhar> mvo: it gives warnings
[13:52] <philinux> psypher246: I'd try both
[13:53] <murlidhar> mvo: and two GPG errors saying signatures invalid.
[13:54] <murlidhar> pffft
[13:54] <oimon> can someone on precise try something for me? open a tomboy window by clicking icon->search all notes, then maximise another window (or in my case with 2 monitors, maximise 1 app on each monitor). then click tomboy icon and click search all notes. - what happens?
[13:54] <gnomefreak> murlidhar: you shouldnt have had extras repo since it was not up for 12.04 and from what i read it wont be
[13:54] <murlidhar> hmmm
[13:54] <philinux> psy a locate compiz there's more
[13:54] <philinux> opps he quit
[14:00] <psypher246> philinux: hi sorry my empathy crashed for no apprent reason. i deleted  .compiz-1/ logged out and back in and still having issues
[14:01] <psypher246> philinux: my system was FINE 30 mins ago until I was showing a friend how the nex expo works and suddenly it crashed and now I canot use my dash anymore
[14:08] <Lint> can I use metacity instead of compiz?
[14:14] <FreeRun> how to change default windoww manager at startup
[14:14] <FreeRun> ?
[14:15] <Daekdroom> Lint, if you use Unity-2D.
[14:16] <eid> hello
[14:16] <FreeRun> i have default unity 3d, but i would like to change it for unity2d
[14:16] <eid> i want to install skype on ubuntu 12.04
[14:16] <eid> can somebody help ?
[14:17] <FreeRun> eid: sudo add-apt-repository "deb http://archive.canonical.com/ $(lsb_release -sc) partner"
[14:17] <FreeRun> eid: sudo apt-get update && sudo apt-get install skype
[14:17] <holstein> FreeRun: you would only need to install unity2d and then choose it from the login screen
[14:17] <FreeRun> a ok, and this will be default option?
[14:18] <holstein> FreeRun: if you choose for it to be, it will be...
[14:19] <FreeRun> ok, i'm checking
[14:20] <philinux> psypher246: do a locate compiz and blow all config files away
[14:20] <psypher246> philinux: obviosly only in my home folder right?
[14:20] <philinux> psypher246: ccsm and unit do not get on
[14:20] <philinux> psypher246: correct
[14:21] <philinux> psypher246: and then a unity --reset for good measure
[14:21] <FreeRun> ok, works fine, thx
[14:22] <FreeRun> unity 3d + compiz+ nvidia driver = tuning up GPU and graphic cards freeze and screen starts to blinking :) under dual os also :)
[14:24] <FreeRun> but i have compiz on another big machines and windows sometimes freeze, even on dual core 2 extreme QX9775 with 32GB RAM and Quadro 6000 :)
[14:25] <area51pilot> I am experiencing issues rendering HTML emails in Evolution on 12.04, attempting to select text in the body causes text to be selected from that point back to the message header.  Anyone else have this issue?
[14:25] <philinux> psypher246: found this for future reference. http://askubuntu.com/questions/70866/how-to-reset-compiz-unity-to-defaults
[14:25] <eid> 10x FreeRun
[14:26] <shaneo> hey guys i just installed beta and panel icons and text are overwriting each other is there any way to fix this
[14:28] <shaneo> its like i have two desktops running
[14:30] <eunshis> any one can help me how to enable usb flash in virtual box that uses  windows exp for ubuntu os
[14:30] <Lint> eunshis, you need to download some virtualbox extension
[14:30] <area51pilot> eunshis: did you install the virtual box extras?
[14:30] <dork> is there a known issue w/ adding yahoo buddies to pidgin 2.10.3 Lubuntu 12.04?
[14:30] <Lint> it has USB2 support
[14:31] <area51pilot> eunshis: its called the Virtual Box extension pack, I believe you need to install it to get that
[14:32] <eunshis> area51pilot, is it different from oracle virtual box i have?
[14:32] <eid> i want to see videos on youtube but i cannot
[14:33] <eid> maybe i don't have latest version of flash
[14:33] <eid> how can i see?
[14:33] <area51pilot> eunshis: ... thats it
[14:33] <eid> i see some of them but not all
[14:34] <area51pilot> eunshis:  https://www.virtualbox.org/wiki/Downloads
[14:34] <dork> nevermind i guess pidgin is EOL since they can't fix bugs from 4 years ago
[14:35] <eunshis> area51pilot, yes i took it from there. So I have to install some extension?
[14:37] <eid> using minitube allowed me to see all videos
[14:37] <area51pilot> eunshis: VirtualBox 4.1.12 Oracle VM VirtualBox Extension Pack   http://download.virtualbox.org/virtualbox/4.1.12/Oracle_VM_VirtualBox_Extension_Pack-4.1.12-77245.vbox-extpack
[14:37] <eid> can somebody help ?
[14:38] <area51pilot> eunshis: thats the link to the download from Oracle for ALL platforms using VBox
[14:38] <area51pilot> ;)
[14:38] <eid> but i want to see it using my browser only
[14:39] <eunshis> I got it. so I have to install it separately then?
[14:40] <area51pilot> eunshis: its an add-on that enables more VBox features
[14:41] <holstein> eid: i would try the chrome browser.. i think will at least help you troubleshoot flash
[14:41] <psypher246> philinux: dude thanks, so far it looks like it
[14:41] <eunshis> ok.
[14:41] <psypher246> 's fixed
[14:41] <area51pilot> eid: ... or Firefox, I seem to have better luck on content w/ Firefox for some reason but I prefer Chrome
[14:43] <psypher246> philinux: damn no it's not
[14:43] <psypher246> philinux: seems like it only happens whe i have all apps minimized
[14:43] <eid> i use chromium too
[14:45] <eunshis> area51pilot, It is supposed to be functioning after that extension?
[14:46] <eid> what is the sollution then?
[14:47] <area51pilot> eunshis: I believe there is a checkbox in the settings for the machine that must be selected to enable advanced features.  If you want to hang around for a few minutes Ill start my VBox up and look at the XP machine
[14:49] <eunshis> none.
[14:50] <eunshis> so, then you will tell.
[14:50] <area51pilot> eunshis: right click on the machiine and go to settings, then look down at USB, select it and make sure u enable USB controller and enable USB 2.0 (EHCI) Controller
[14:51] <eunshis> ok
[14:54] <eid> any solution to problem ?
[15:00] <RobinJ1995> Is there anyone who can help me with this problem?
[15:00] <RobinJ1995> https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/984991
[15:00] <RobinJ1995> It's extremely annoying
[15:01] <eunshis> area51pilot, done but still not visible. what is the way of accessing it?
[15:03] <area51pilot> eunshis: restart VBox?
[15:03] <eunshis> I dit it.
[15:04] <area51pilot> should be avail
[15:04] <eunshis> that I was thinking.
[15:12] <eid> so can somebody help please ?
[15:12] <RobinJ1995> hello? no'one? ubuntu's a bit dull without sound
[15:23] <eid> RobinJ1995 it happens all the time ?
[15:23] <eid> he's gone oh
[15:29] <Parufito> Hi all! I've installed Ubuntu 12.04 Beta with Gnome Classic. And with that, the UpdateManager doesn't run in background, anybody knows how to activate that?
[15:29] <Lint> with what?
[15:31] <Aram> hi, I installed the latest 12.04 snapshot and I get this error when I do an apt-get update: 'W: GPG error: http://extras.ubuntu.com precise Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 16126D3A3E5C1192'. I found various 'fixes' on the Internet but I'm not doing any of them until I understand why the error happens and what are the consequence of the fixes.
[15:32] <Aram> oh, and apt-get finger prints something I don't think is right: http://pastebin.com/PYdc9ZcS
[15:37] <eid> i just resolved the problem
[15:37] <eid> now there is only one more problem remaining
[15:37] <eid> i want to have a windows virtual machine on ubuntu
[15:38] <eid> xp or w 7
[15:38] <bazhang> eid, so install vbox
[15:38] <eid> i got vbox
[15:38] <bazhang> so whats the issue
[15:40] <Lint> USB2?
[15:44] <Aram> no ideas? hmm.
[15:45] <bazhang> !gpgerr | Aram
[15:46] <Aram> well, thanks. yeah, I've seen the fix, but I don't understand why I get that error after a default install.
[15:46] <bazhang> could have timed out; hard to say really
[15:47] <Aram> could it be because I didn't have network conectivity when I installed, and I've deleted the CD repos from sources.list after I've set up the network?
[15:47] <bazhang> could well be
[15:58] <eid> brb
[16:11] <eid> back
[16:11] <eid> bazhang
[16:11] <eid> i don't have the machine
[16:11] <bazhang> eid hi
[16:12] <eid> do you know where can i find operating systems as virtual machines ?
[16:13] <eid> bazhang i am asking maybe you know
[16:13] <bazhang> eid, they are called virtual appliances
[16:14] <eid> :) got it
[16:14] <bazhang> eid, perhaps check the vbox home page, or ask in #vbox
[16:28] <area51pilot> I need to change my host name, this is in the host file : ( 127.0.1.1	ubuntu.ubuntu-domain	ubuntu  ) do I change all instances of "ubuntu" to the desired host name?
[16:28] <area51pilot> as well as the hostname file
[16:32] <BlueWriter> I'm having trouble upgrading from 11.10, keep getting GLIBC_2.14 not found, can anyone point me in the right direction for help ?
[16:59] <natman> is there going to be an RC release for (K)Ubuntu 12.04?
[17:07] <jbicha> natman: no, every ISO built next week is a release candidate in a sense, but they won't be officially announced or anything
[17:07] <natman> jbicha: so 26th is final release then?
[17:08] <jbicha> yes, that's what the schedule says :)
[17:08] <natman> cool thanks
[17:11] <thebwt> I'm looking to customize 12.04 lightdm login screen for my university. Where should I start looking for documentation?
[17:14] <xgt001> hi removing fglrx installs fglrx-updates, how do i get rid of fglrx totally?
[17:14] <Lint> thebwt, greeter source code is the best
[17:16] <thebwt> crud typed /quit on accident in a different tab :p
[17:16] <thebwt> did someone respond to me?
[17:17] <|Anthony|> thebwt, http://people.ubuntu.com/~robert-ancell/lightdm/reference/
[17:17] <thebwt> |Anthony|: thanks!
[17:17] <|Anthony|> have fun
[17:18] <thebwt> plan too
[17:18] <|Anthony|> be sure to share your greeter when finished
[17:18] <thebwt> I'll do so
[17:18] <|Anthony|> i'd like to see the creations people come up with...
[17:18] <|Anthony|> wonder where a good place to share greeters would be... maybe gnole-look? idk
[17:41] <JosephHarrietha> Is there a way to return the keyboard shortcuts in Ubuntu to their default values? Currenlty on 12.04 beta.
[17:50] <BarkingFish> Evening all.  I just had a really, really wierd incident on this machine - and I'm not entirely sure what caused it, but it resulted in my having to force my PC to power off, since whatever happened killed my keyboard access.
[17:52] <BarkingFish> I dropped to a root shell, to unload and reload ndiswrapper so my wifi would kick in - i unloaded the module and disconnected my wifi device - and when I reloaded the ndiswrapper module, the TTY i was in simply started looping the same instruction over and over, so fast that I had to switch my monitor off.  All I could make out was that it was pasting the same log entry and detailing all the modules in existance on my machine.
[17:53] <BarkingFish> I tried REISUB to reboot the machine, and SysRQ+O to power it off, no effect - so I had to hold in my power button to kill the system, and I've just had to fsck both drives on restart
[17:56] <JosephHarrietha> Is there a way to return the keyboard shortcuts in Ubuntu to their default values? Currenlty on 12.04 beta.
[18:01] <v0lksman> has anything major changed with vconfig in the vlan package?  I can't seem to get vlan tags to persist after a reboot
[18:13] <Hieberrr> How do set startup programs/applications to start minimized ?
[18:15] <Hieberrr> Anyone?
[18:17] <Anikwa> I asked this question in #ubuntu and was referred here. So I'll ask again: Does 12.04 have the Gnome classic (no effcts) option which looks like Gnome 2? or is it all that gnome 3 crap now?
[18:17] <kklimonda> Anikwa: it has gnome classic desktop, which uses gnome3 apps to deliver a sort-of gnome2 look
[18:18] <Daekdroom> But not by default.
[18:18] <Daekdroom> You have to install a package.
[18:19] <Anikwa> Seems reasonable. I'll give it a try in virtualbox when the final release is released
[18:58] <Atlantic777> Hey, anything I should know about older nvidia GPU and drivers in ubuntu 12.04?
[18:58] <Atlantic777> A friend has some problems with FX5200, it seems that he somehow installed nouveau, glxinfo tells us that render is gallium. Something's wrong.
[19:08] <Logan_> micahg: Are you around?
[19:10] <micahg> Logan_: yes
[19:10] <Logan_> micahg: Is there a reason why the Chromium PPA for daily builds hasn't been updated frequently recently?
[19:10] <Logan_> Also, is it possible to make the builds for Precise?
[19:11] <Logan_> (I'm asking you because you were the last person to upload a build in that PPA.)
[19:11] <micahg> Logan_: the bot has been offline for months, after UDS I hope to get it going again
[19:11] <Logan_> Oh, I see. Thanks!
[19:22] <mizifih> Hi there. I have this 2TB (1.8TB) NTFS drive that Windows 7 can access but Ubuntu 12.04 can't. It's almost full. Gparted is listing the disk, but don't recognizes the partitions/filesystem. I have another one with the same manufacturer/model and it's working fine
[19:28] <Atlantic777> mizifih: post sudo fdisk -l at paste.ubuntu.com
[19:30] <MariachiAC> Hi all. Need h help with Ubuntu 12.04 Beta. Wireless is currently not working, and I am trying to get it to work. Laptop is Dell Inspiron 1520, and it has a broadcom chipset I believe. I installed the drivers within the addiontal drivers area, but still I cannot get wireless to work. Not sure what is going on, or what to do. Help please.
[19:34] <mizifih> Atlantic777: just a sec
[19:36] <mizifih> Atlantic777: http://paste.ubuntu.com/937353/
[19:37] <mizifih> Atlantic777: sda
[19:38] <Atlantic777> mizifih: sda isn't a NTFS partition.
[19:38] <Atlantic777> mizifih: how to ge. Sorry. I'll be here later.
[19:39] <mizifih> Atlantic777: well, windows think so and list all the almost 2TB in it, it has like 1GB left to use
[19:39] <mizifih> Atlantic777: thanks, I'll try later ;)
[19:41] <MariachiAC> Hi all. Need h help with Ubuntu 12.04 Beta. Wireless is currently not working, and I am trying to get it to work. Laptop is Dell Inspiron 1520, and it has a broadcom chipset I believe. I installed the drivers within the addiontal drivers area, but still I cannot get wireless to work. Not sure what is going on, or what to do. Help please.
[19:51]  * tommylommykins is wondering what the implications of installing 12.04 now would be
[19:51] <tommylommykins> although it's a risky thing, I gather from the quick responses on #ubuntu that there shouldn't bee too many issues
[19:51] <tommylommykins> or at least, not too much work would be needed on my part on the 25th to get up to date
[19:54] <trench> anyone know where alt+tab has gone in precise?
[19:55] <BarkingFish> trench, on ubuntu or kubuntu?
[19:55] <BarkingFish> it still works on kubuntu, for the record :)
[19:56] <trench> BarkingFish: ubuntu
[19:56] <saschakb> trench, alt+tab in Ubuntu is still switching the tasks/windows
[19:57] <guntbert> trench: works here
[19:57] <trench> not here
[19:57] <BarkingFish> trench, how new is your 12.04 install?
[19:58] <BarkingFish> there have been a lot of updates across the last few days to different things
[19:58] <saschakb> trench, do you speak about Unity or Unity 2D?
[19:58] <trench> BarkingFish: a week tops
[19:59] <BarkingFish> when was the last time you updated your system?
[19:59] <trench> saschakb: default login i think
[19:59] <trench> 2 seconds ago :P
[19:59] <trench> cron-apt runs all the time
[20:00] <trench> together with update-apt
[20:00] <saschakb> There are at the moment still 4 open bugs according alt+tab :\
[20:01] <saschakb> trench, maybe you ask in #ubuntu-unity if one of the devs is around - and you can cross check for you're problem?
[20:01] <BarkingFish> saschakb, got any bug numbers you can PM to me?
[20:02] <Mr_Cool59> i am trying to figure out why  my laptop does not come out of resume all i get is a black screen when i open up the screen if i am remembering right older version had this issue with ATI video cards but i can not seam to find the answer
[20:06] <mizifih> saschakb: u kick ass when it's ubuntu?
[20:07] <BarkingFish> Guys using ubuntu, can I just check - are you running Brass Monkey on 12.04 beta?
[20:07] <BarkingFish> aka Unity 5.40?
[20:09] <trism> BarkingFish: we have 5.10
[20:09] <trism> !info unity | BarkingFish
[20:10] <trism> BarkingFish: hmm, well, we do actually have 5.10.0-0ubuntu6
[20:10] <BarkingFish> trism, ok - thanks. I'm looking at a bug on alt-tab (in relation to compiz crashing) - it says the target milestone for repair is 5.40
[20:10] <trism> BarkingFish: which bug #?
[20:11] <BarkingFish> Bug #916879
[20:11] <BarkingFish> Comment from the OP: "Update: after more occurrences of this, it seems this is triggered by alt-tab."
[20:12] <trism> BarkingFish: shouldn't apply to precise, that is an oneiric bug, we have a newer version
[20:13] <carli2> hi
[20:14] <carli2> can you please either add kernel 3.3 or backport HDMI-audio for AMD APUs?
[20:14] <mizifih> Hi there. I have this 2TB (1.8TB) NTFS drive that Windows 7 can access but Ubuntu 12.04 can't. It's almost full. Gparted is listing the disk, but don't recognizes the partitions/filesystem. I have another one with the same manufacturer/model and it's working fine
[20:14] <mizifih> http://paste.ubuntu.com/937353/
[20:15] <guntbert> carli2: this is no channel where messages reach the developers
[20:15] <mizifih> windows read it just fine and list all the almost 2TB in it, it has like 1GB left to use
[20:15] <carli2> guntbert: well, what can I do with my problem?
[20:15] <carli2> guntbert: I have a deadline to deliver working hdmi-sound
[20:16] <carli2> guntbert: and a possible fix should be mainstream so that it's compatible to upgrades
[20:16] <guntbert> carli2: but not on a beta-OS, I hope
[20:16] <BarkingFish> trism, OK - i was just looking it over, as part of a check into alt-tab bugs in relation to trench - who says that alt-tab is not working for him on 12.04 Ubuntu
[20:16] <micahg> carli2: ask in #ubuntu-kernel
[20:16] <BarkingFish> I am checking everything unity / alt-tab related
[20:22] <mcdonc_> does anyone else have an issue in this scenario: 1) using gnome classic 2) using multiple monitors (but same video card, one laptop screen, the other connected to external output) 3) "place windows" compiz plugin is activated 3) inactive windows that don't have the entirety of their bodies in the current display rearrange themselves when you select a different window
[20:22] <mcdonc_> s/3/4/ ;-)
[20:22] <mizifih> ubottu: halp!
[20:22] <mcdonc_> when "place windows" is not activated, it doesn't happen
[20:23] <grendal-prime> im trying to install..network-manager-openvpn.  it is not listed in the software center..but it is listed as being available for the distrobution  12.04 ?
[20:23] <mcdonc_> but when place windows is not activated, new windows often wind up in the "wrong" display (the display without the pointer)
[20:23] <MariachiAC> Does the Broadcom STA Wireless Driver work in the current Beta of Ubuntu 12.04?
[20:23] <grendal-prime> am i missing something or are we supposed to just use apt.
[20:24] <mcdonc_> also doesnt happen in unity shell
[20:24] <Mr_Cool59> i am trying to figure out why  my laptop does not come out of resume all i get is a black screen when i open up the screen if i am remembering right older version had this issue with ATI video cards but i can not seam to find the answer
[20:48] <Lace57> !info samba
[20:50] <glosoli> I am not sure if it's regression or what, if I am listening to music on Audacious, and I press logout before turning off audacious, when I log in my sound doesn't work unless I Open Sound Settings and set Output lines (press again on one of these)
[20:50] <glosoli> anyone can confirm ?
[20:50] <mizifih> !info gdisk
[21:49] <swattor> anyone noticed a problem where you login (X) and it just sits there saying "Logging in" and doesn't do anything
[21:54] <dysoco|laptop> So I've no sound at all in Ubuntu 12.04, I'm using a Headphone, and everything is not muted and leveled up in "alsamixer" any ideas ?
[22:02] <Artemis3> dysoco|laptop, try with alsamixer, sometimes there is a thing that must be muted to work
[22:03] <dysoco|laptop> Artemis3, It's fixed now... I was using the wrong Audio output for some reason... sorry
[22:03] <Artemis3> cool
[22:34] <bcuraboy> hi everyone.which program would you recommend to convert a avi file into a mp4?
[22:35] <Artemis3> mencoder? :)
[22:35] <bcuraboy> the point is i wanna convert a dvd into a blu-ray file
[22:39] <bcuraboy> i'll try that one
[22:40] <K4R0L15> I get this weird purple line http://i.imgur.com/J5xff.jpg on my external monitor in Ubuntu 12.04 and I'd like to file a bug. Do I report it against kernel or intel video driver?
[22:40] <K4R0L15> This is cross-posted from #ubuntu as they sent me here
[22:44] <K4R0L15> No one? :( I just want to help...
[22:45] <trism> K4R0L15: can you reproduce it in other environments (or at least does it happen in both unity-2d and 3d?)
[22:50] <K4R0L15> trism: that's a good question re: Unity 2D - I didn't try it. It does not happen on my other machine with a different external monitor, but on the machine that I do have the problem, I also had it when I upgraded kernel to 3.2 on Ubuntu 11.10
[22:50] <K4R0L15> I'll try it on Unity 2D now and come back in a minute
[22:56] <BarkingFish> evening all. Anyone here using the new version of VLC, 2.04?  If so, could you do a bug check for me please - there appears to be a bug in libpostproc52.so which is causing VLC to segfault when you apply post processing to an AVI or mp4 video.
[22:57] <K4R0L15> trism: the issue is present in Unity 2D as well. It's weird though, because it doesn't happen right away. When I first login (2D or 3D) the line is not present. It only appears after the monitor has been switch off an back on like when it does to sleep.
[22:57] <K4R0L15> goes*
[23:05] <trism> K4R0L15: strange, then either linux or the intel drivers would be the way to go I suppose, whoever triages it can fix it later if necessary
[23:06] <trism> K4R0L15: might be best to start with linux since you said it started with the 3.2 kernel
[23:07] <K4R0L15> I assume 12.04 has newer intel drivers than 11.10 and since I could replicate the issue with the same kernel version, but older intel driver on 11.10, I'd assume it's kernel.
[23:07] <spaceneedle> Gnome-tweak tool isn't working.
[23:07] <K4R0L15> Thanks for your help. Off to file my first ubuntu bug :)
[23:08] <K4R0L15> spaceneedle: it's not working for me either
[23:09] <lakitu> when i try to install 12.04 it hangs at 'stopping saving kernel messages, or something like that
[23:09] <lakitu> 'stopping saving kernel messages'
[23:10] <spaceneedle> I was able to install  a few extensions from the gnome extension site--but I cannot really tell as the tweak tool won't open up.
[23:13] <skwishy> Hello all.
[23:13] <skwishy> Can somesome tell me if there is an ctrl+alt+backspace type feature in the latest ubuntu to force X to restart?
[23:13] <K4R0L15> Yes
[23:13] <K4R0L15> It's disabled by default though
[23:13] <skwishy> It seems I need to manually kill X everytime I close my macbook lid :(
[23:14] <skwishy> K4R0L15: do you happen to know how to enable it?
[23:14] <K4R0L15> It probably tries and fails to suspend you macbook. Did you try disabling that?
[23:15] <K4R0L15> Yes, go to keyboard layout
[23:15] <K4R0L15> That is look for keyboard layout it app lense, then go to options and you'll see "key sequence to kill X"
[23:15] <skwishy> K4R0L15: it could be that I don't know what suspend does, but when it freezes, I can still ctrl-atl-f1 to log in and kill X.
[23:16] <skwishy> K4R0L15: Thanks, I will try enabling that keystroke shortcut.
[23:17] <K4R0L15> Try clicking on a top right corner settings icon, going into system settings, then choose power and set "Do nothing" under "When lid closes"
[23:17] <K4R0L15> See if this helps
[23:17] <Bender_> Hello, I have problem installing ATI 12.3 driver in a fresh install 12.04
[23:18] <Bender_> it says that now the repository database is broken. I can use only unity2D
[23:18] <skwishy> K4R0L15: good idea, I will try that.  HOwever I suspect the problem is with the screensaver not waking up.  I still get a moving mouse pointer, but nothing else.
[23:18] <Bender_> Open drivers made my video card fan to spin too fast and be noisy and less energy efficient.
[23:19] <Bender_> 12.3 driver from AMD works good but after software update they don't work anymore.
[23:21] <K4R0L15> Bender_: can you install other packages or are repositories broken for everything?
[23:23] <Bender_> K4R0L15, i have repaired the database, but after installing the updates the fglrx tries to update and gives an error. After reboot I have only unity2D
[23:23] <K4R0L15> You only get 2D because the driver isn't properly installed
[23:23] <K4R0L15> What error does fglrx give you?
[23:24] <Bender_> K4R0L15, I don't know, it says that need a dipendency...a library or something like that..
[23:26] <Bender_> I used this guide but the last step returned an error so I had to dobuleclick the file and "run in teriminal" to have a wizard and install the driver
[23:26] <Bender_> http://www.multimediaboom.com/how-to-install-ati-catalyst-driver-12-3-in-ubuntu-12-04-precise-pangolin/
[23:28] <K4R0L15> I personally never had to install ATI drivers myself, but I had trouble with nvidia drivers on 12.04 because it didn't include kernel source by default, so dkms could not build modules
[23:28] <K4R0L15> I had to make sure to install linux-headers and linux-image packages for 3.2 kernel manually
[23:28] <lakitu> my ubuntu 10.10 is borked, & the beta install disk hangs during boot up - where can i find a release candidate
[23:28] <K4R0L15> Not saying you have the same issue though
[23:28] <K4R0L15> lakitu: RC for which version?
[23:28] <lakitu> 12
[23:29] <K4R0L15> There is no RC for 12.04
[23:29] <K4R0L15> You can either get Beta 2 or a nightly build
[23:29] <Bender_> K4r0L15, http://pastebin.com/aWVpfX6v
[23:29] <lakitu> ok - thanks
[23:30] <lakitu> (i actually used a nightly build) - later
[23:31] <K4R0L15> Bender_: I'm afraid it's slightly beyond me
[23:33] <Bender_> K4R0L15, and this? (trying to update the video driver from software update: http://pastebin.com/xJB5TFLG
[23:34] <Debro> is something wrong with my ubuntu, i get message "not all updates can be installed"
[23:36] <K4R0L15> Bender_: did you try apt-get -f install
[23:36] <Debro> K4R0L15, no what it will do??
[23:36] <Bender_> K4R0L15, no...I try now
[23:38] <K4R0L15> Debro: do you have any 3rd party PPAs added?
[23:38] <Debro> K4R0L15, dont now..
[23:39] <K4R0L15> Debro: try opening terminal and running sudo apt-get update && sudo apt-get upgrade
[23:40] <K4R0L15> See if that shows what packages it's complaining about specifically
[23:40] <Bender_> K4r=L15, doesn't work
[23:40] <BarkingFish> can someoen tell me why my computer is downloading support for something I don't have installed??? :)
[23:40] <Bender_> K4R0L15, I have still the fglrx that tries to install from software update but fails.
[23:41] <BarkingFish> apper is adding "pulseaudio-module-bluetooth" to my system, despite the fact that I uninstalled everything pulseaudio related about a week ago
[23:41] <CyberWorld> any ideas when final version of flash for amd64 comes out?
[23:41] <Debro> xmms works on 12.04?
[23:42] <Debro> can i get xmms from USC?
[23:47] <K4R0L15> CyberWorld: what version are you referring to? Flash site says the latest for linux is 11.2.202.233 and it's the one installed on my machine http://www.adobe.com/software/flash/about/