| trelane | hey, I have a bug report on the -PSP kernel from rcn-ee's minimal builds, is that your kernel? Where should I send it? Problem relates to plugging in a rtl8192cus | 03:20 |
|---|---|---|
| rcn-ee | trelane, the rtl8192's are 50/50 if they'll work at this point.. i have one that works perfect, and the other that failes on every boot.. | 03:59 |
| trelane | ok, would dmesg output from insertion/failure be of help? | 03:59 |
| rcn-ee | not really... have you tried 3.2-psp13? there's a couple musb fixes... | 04:00 |
| trelane | I'll update now and report shortly | 04:00 |
| * heathkid waiting on an update... | 04:04 | |
| trelane | rcn-ee, I used a clean 12.04-r1, and don't see the kernel in apt-get dist-upgrade | 04:28 |
| rcn-ee | trelane, i don't have a repo setup for the kernel deb's.. it's mostly manual installling deb's... 3.2-psp13 for precise-armhf is still begin built.. but i have a cross built uImage/modules posted here for another user: /msg MemoServ READ NEW | 04:54 |
| rcn-ee | http://rcn-ee.homeip.net:81/testing/beaglebone/3.2-psp13/ | 04:54 |
| rcn-ee | as long as my smoke test is sucessful tomorrow, that' actually the default kernel going to be used in my monthly update demo images, this weekend.. | 04:55 |
| trelane | rcn-ee, sounds good | 04:57 |
| === Guest60690 is now known as Termana | ||
| === jkridner__ is now known as jkridner | ||
| === chuck__ is now known as zul | ||
| === orated_ is now known as orated | ||
| === Guest88650 is now known as zumbi | ||
| === orated_ is now known as orated | ||
| Xase | Hi, is anyone here familiar with Ubuntu arm on Android handset, native not chroot? | 19:17 |
| scientes | Xase, if its native, its not android | 19:18 |
| scientes | also, chroots are native | 19:19 |
| Xase | No kidding? I want to remove android. | 19:19 |
| Xase | -_- | 19:19 |
| Xase | I meant direct. Not side by side. | 19:19 |
| Xase | It's still an android handset. Well at least till I remove Android. | 19:20 |
| orated_ | Hey prpplague | 20:06 |
| prpplague | orated_: greetings | 20:06 |
| orated_ | prpplague: I'm trying to get ethernet working on BB B4 running Ubuntu 11.10 kernel 3.2. I asked in #beagle about the same and got directed here. Could you help me on that? | 20:49 |
| prpplague | orated_: sorry i can not, i am sure someone here who normally does ubuntu stuff can possible help you | 20:50 |
| orated_ | Sure, I'll try | 20:51 |
| orated_ | Hello! I'm running Ubuntu 11.10 kernel 3.2 on BeagleBaord B4. Both the BeagleBoard and USB hub are externally powered with 5V supply. lsusb, ifconfig outputs as shown here - http://paste.ubuntu.com/1018497/ - How can I get ethernet working? | 20:53 |
| orated_ | I've a usb hub connected to the OTG port. A usb-ethernet adapter is connected to the hub. And a RJ45 cable from one of the four ports of the router is connected to it. Second port of the same router is connected to the host system | 20:53 |
| Xase | sudo if up usb0 ? | 21:06 |
| GrueMaster | Hub off the OTG port? Why not try the single USB port? I'm not sure if the OTG port is enabled in the main kernel. | 21:06 |
| Xase | sudo dhcpd? | 21:06 |
| * GrueMaster didn't look at the pastebin output first. | 21:07 | |
| Xase | :P | 21:08 |
| Xase | Hello GrueMaster. Probably dont remember me, but hello nonetheless. | 21:08 |
| GrueMaster | Been a while. How's it going? | 21:09 |
| Xase | Good. Still twiddling with my nook. id put serious effort into it but my computer is beyond junky | 21:11 |
| orated_ | Xase: GrueMasterJust a moment, BB is not accepting commands, restarting | 21:16 |
| orated_ | Xase: sudo ifup usb0 gives - Ignoring unknown interface usb0=usb0. | 21:23 |
| orated_ | And sudo dhcpd, command not found | 21:24 |
| orated_ | GrueMaster: There is no USB port on Beagleboard B4, only USB OTG | 21:24 |
| Xase | hrm my linux knowledge is short when it comees to networking :( | 21:26 |
| orated_ | Same here | 21:27 |
| TypoNAM | that sucks orated_, I've used a beagleboard rev C and had USB ethernet networking with one of linksys's adapters with vanilla kernel. I used the working populated USB port and a powered USB hub to connect the keyboard, mouse, and ethernet adapter to :P | 21:34 |
| TypoNAM | so I'm not sure if the OTG port will work the same way | 21:34 |
| orated_ | Probably its hardware defect. Or some kernel patch missing. - http://elinux.org/BeagleBoard#USB https://groups.google.com/forum/?fromgroups#!topic/beagleboard/KtUXwhWm2r4 | 21:42 |
| GrueMaster | orated_: I am not that familiar with the rev B board (I have a C4). As I said earlier, I am not sure if the OTG port is enabled in the kernel. | 21:45 |
| orated_ | Thanks, I'll find about that | 21:46 |
| orated_ | I require network connection only for installing xfce and OpenCV related packages. Is it possible to chroot to the fs from the host to achieve the same? So that I can atleast start with the main task instead of getting stuck ... | 22:24 |
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!