=== root is now known as Guest27782 === bazhang_ is now known as bazhang [02:52] hi === max is now known as Guest76798 [05:07] can anyone tell how to configure X for nvidia driver [05:21] morning [05:22] this crontab: 25 6 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ) means that i should start at 6:25, right? but it is starting now.. 7:21 [05:36] ubuntu__: what's going wrong? [05:37] i installed nvidia drivers and now the X doesn't start [05:37] hi [05:37] ubuntu__: errors in /var/log/Xorg.0.log ? [05:38] yes [05:38] ubuntu__: use a !pastebin [05:40] ubuntu__: ok. sounds like you need to read up on how to ask a question in irc :) [05:40] frogonwheels: i m sorry was getting the log file [05:40] http://pastebin.com/J91t9RM8 [05:41] [ 144.809] (EE) No devices detected. [05:41] ubuntu__: ^^ I suspect this might have something to do with it. Have you loaded the nvidia modules? [05:42] i installed nvidia drivers from the terminal and then i did an update and restarted the laptop...X didn't start [05:43] so right now i m using live usb [05:43] so which modules did that load (looks like nvidia-173 or something) [05:43] ? [05:44] did you install nvidia-current package? [05:44] yes i installed it and i have nvidia-current folders too in lib [05:44] ubuntu__: lsmod | grep nvidia ?? [05:45] i am afraid i didn't do that [05:45] ubuntu__: anything in dmesg about nvidia? [05:45] can u explain [05:46] ubuntu__: dmesg | grep -i nvidia are there any errors? [05:46] i will have to do it [05:46] cuz as of now [05:46] i m using it through the live usb [05:46] ubuntu__: I mean X didn't find any nvidia screens, so possibly the module didn't load, or there were errors loading the module [05:47] i suspect the module didn't load [05:47] ubuntu__: ok. well have a look-see and report back. I'd put it all in one pastebin so if I'm not here somebody else can take over [05:47] its like i guess nvidia module is not loading automatically on startup [05:48] ubuntu__: well the other thing is, that if the nvidia module doesn't load.. try sudo modprobe nvidia (or whatever the module is called) [05:48] ubuntu__: and see in log for any errors generated /var/log/message ? or /var/log/kern.log [05:48] i tried doing this...but i guess the name is not nvidia.....how to find the name of the module? [05:48] ubuntu__: if that loads it up, yo might need to modify /etc/modules [05:50] ubuntu__: modules are in /lib/modules/`uname -r`/ [05:50] ubuntu__: find /lib/modules/`uname -r`/ -iname '*nvid*' [05:51] ubuntu__: sorry - both my *ubuntu boxes are ATI now [05:51] ok [05:52] i'll just check that [05:58] for kubuntu 11.10, is there any way to get ipod compatibility. -- specifically, this all worked in the past and no longer does. [05:59] for example, gtkpod, not useable. amarok, also doesn't work. rhythmbox, no good. banshee doesn't even start === root is now known as Guest61164 === Ju is now known as Julian === Julian is now known as Guest71300 === Guest71300 is now known as Julizn === Guest61164 is now known as MrPorc === Julizn is now known as Julian69 [06:13] wesh [06:14] sa zone.... === Julian69 is now known as JuDelgado [08:00] is it possible to upgrade mac firmware while only having linux installed? Other than virtual machine? === michael is now known as Guest52975 [08:30] Can someone tell me why I cant get my windows to fully maximise? [08:36] hello [08:36] my user account password is lost, and I cant update system or anything else where password is required. searched google for solution but failed. please give me some link or explenation how to reset my acc password. Im using Kubuntu 11.10 [08:36] tnx [08:36] schprem: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation. === Jikan is now known as Jikai === Jikai is now known as Jikan === jonah is now known as Guest61268 [09:00] hi i hope someone can help. I've set up a webdav folder on my kubuntu system which works great. however the filetypes or mimes are recognised. a few are like .doc etc opens in libre office, but .svg and other ones I can't get to be recognised. even if i set them in file type properties, when i open the folder again they don't have an associated application... [09:01] Guest61268: As far as I remember most of mimes are being recognized by actual content. [09:02] Guest61268: I remember konqueror in KDE 3.5 had some options for remote content, I'm not sure how things look today. [09:02] Guest61268: are you sure you have an actual vector graphic program installed that can open svg? [09:03] Wizard: thanks - i've had a look in file associations menu etc but not sure what i need to add... === king is now known as Guest61620 === Guest61620 is now known as yisuihan123 [09:03] Mamarok: yes, it's not just svgs, but trl and lots of other filetypes that work fine on the local machine and open in the right apps [09:04] it's just when i'm in the webdav folder in dolphin they don't open in the right apps [09:04] it must prefix them somehow or something === yisuihan123 is now known as yisuihan12 === yisuihan12 is now known as yisuihan123 [09:05] shouldn't be necessary, as the KIO file takes care of that [09:06] Maybe something is broken. Guest61268, this looks like a bug, please, check launchpad or KDE's bugzilla. Maybe somebody've already reported it. [09:06] KIO client actually [09:07] it would be a bug against the kio_http [09:11] I can't find a bug report, neither against dolphin nor against kio_http [09:12] in bugs.kde.org that is === sem is now known as Peace- === jonah is now known as Guest94869 [09:25] hi guys !!! [09:26] hi === frega is now known as dpi-troll [10:47] can someone tell me what exactly i need to do in order to install the reqd KDE environment on ubuntu? I have gone through all the pages of support but i am geting some random errors [10:47] apps: kubuntu-desktop package, that is all [10:48] link? [10:48] apps: it will install everything you need from that [10:48] apps: open the package maanger, search for kubuntu-desktop click install [10:48] its already there in UBUNTU? [10:48] apps: ues [10:48] yes [10:49] will it be enough for me to install okular? [10:49] apps: kubuntu-desktop will install the full kde desktop environment [10:50] how exactly do i get to package manager? [10:51] apps: open software center [10:51] search for kubuntu-desktop [10:51] click install [10:52] ikonia : thanks [10:54] ikonia : is it "Kubuntu plasma desktop/netbook system"? [10:54] no idea, the package is kubuntu-desktop, if in doubt "sudo apt-get install kubuntu-desktop" [10:58] !find plasma-desktop [10:58] Found: plasma-desktop, kde-plasma-desktop, plasma-desktopthemes-artwork [11:16] Hi all. [11:17] I am trying to transfer files from my Android 3.2.77 (3.2.1) device to my Kubuntu Linux Laptop. [11:17] I have installed and set up mptfs, but still nothing seemed to have changed. [11:17] What else do I need to do? [11:21] any mint user 12 kde === dpi-troll is now known as frega [11:23] in mint kde 12 shut down speed is too slow any idea to improve it? === cucchetto is now known as wolf === wolf is now known as Guest15025 [11:27] power: ask the mint support team [11:27] !mint | power [11:27] power: Linux Mint is not a supported derivative of Ubuntu. Please seek support in #linuxmint-help on irc.spotchat.org [11:27] what? [11:28] power: ubottu is a bot informing you where the mint support channel is and on what network it's on [11:29] i know where it is [11:29] thanks all [11:29] welcome === Nicekiwi_ is now known as Nicekiwi [11:50] i downloaded and installed KDE-DESKTOP from ubuntu software Center. Is that enough to download and compile 'OKULAR'? [11:51] Also, how do i switch to plasma desktop? [11:51] apps: [11:51] Peace- : yes? [11:51] apps: sudo apt-get build-dep okular [11:52] that is enough to compile okular [11:52] at the login choose kde desktop [11:52] o kde workspace [11:52] before login i meant [11:53] Peace- : http://okular.kde.org/download.php. Please go to the end of the page. Does the step you mentioned do all the 8 steps mentioned under the sub heading 'okular'? [11:54] i know how to compile okular [11:54] Peace- :Thats not what i meant. [11:55] you need to download the dependeces => rthen you can download source code and compile i t [11:55] does the step you mentioned do all that? [11:55] Peace- [11:56] sudo apt-get build-dep okular #this download and install all the dependeces to compile okular [11:56] Peace- : Thanks a lot [11:57] apps: after you did that you can follow what you posted before [11:57] Peace- : what exactly? [11:59] Peace- : What exactly did you mean by that? [12:07] Peace- : Where exactly do i find the source for okuar? I need to work on it? [12:08] apps: apt-get source okular === achille_ is now known as achille [12:09] apps: git clone git://anongit.kde.org/okular [12:09] on konsole [12:09] of course you need git to download [12:09] so sudo apt-get install git-core [12:10] Peace- : I have downloaded git. Now once i make changes to okular code how do i compile it again? [12:10] as before [12:10] git clone git://anongit.kde.org/okular [12:10] cd okular [12:10] mkdir build [12:10] cd build [12:10] Peace-: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation. [12:10] cmake -DCMAKE_INSTALL_PREFIX=/path/to/your/kde4/install/dir .. [12:11] Peace- : Ok for private chat? [12:11] nope because i have to go [12:11] no my problem was that i couldnt do the cmake statment [12:12] that was my original problem [12:12] have you installed cmake then [12:12] if you have not all dependences cmake would give you error [12:12] and of course you need cmake [12:13] hateball: how exactly must i install cmake? [12:13] apt-get install cmake [12:14] hateball: And uninstall Okular that i got from "sudo apt-get build-dep okular"? [12:19] Anyone....how do i uninstall Okular that i got from "sudo apt-get build-dep okular"? [12:25] apps: why are you tyring to compile okular ? [12:26] need to work on it [12:26] ikonia: [12:26] what do you mean you need to work on it ? [12:26] ikonia: make changes to source and compile [12:27] apps: with respect, how can you expect to make changes to it if you are not at a level where you have any understanding of how to compile something ? [12:27] ikonia: i know i intend on learning over a couple of months. i dont need to get it done by tomorrow [12:28] apps: okular is not a good learning tool, start with something small and simple [12:30] ikonia: are u okay with a private chat? [12:30] howdy all [12:30] apps: there isn't a need for a private chat, [12:31] hello BluesKaj [12:31] hi [12:31] how can i create .deb package from source code ?? [12:31] ikonia : anyway can you tell me how to uninstall 'okular'? [12:31] surbiks: that's quite a complex process [12:31] hey ikonia [12:31] apps: open the package manager, search for okular, click remove/uninstall [12:32] ikonia :what ?? [12:32] surbiks: that's quite a complex process [12:34] ikonia : Solution is not easy? [12:34] surbiks: no, it's quite a learning curve [12:36] ok but i want to create no idea ?? [12:36] surbiks: it's well documented on the ubuntu wiki [12:36] it's not something that can just be told you have to read/learn/understand [12:37] surbiks https://wiki.ubuntu.com/PackagingGuide/Complete [13:36] help with hplip: can't communicate with printer, however I think I narrowed the issue. The problem is non unicode strings on the printer serial, so every application crashes trying to communicate. Can you tell me how to fix this? [13:48] Hello. I've got a problem: I've just upgraded to Precise and my screen refresh rate resets to 60Hz down from 85 every time I log in. I'm adjusting it with nvidia-settings, which worked fine before. Any idea? [13:52] Harmonium: are you running it with sudo? === chris_ is now known as Guest24354 [13:54] hateball: yes. It also has an option to write the config into xorg.conf, which I tried, but it's of no use. It reverts back, even by logging off, not to mention restarting. [13:55] Harmonium: Ok [13:55] Not much help here I guess, the only nVidia device I use is this machine and I run at 50hz :p [13:56] Well, I have a CRT monitor and at 60Hz it's not usable or my eyes will bleed. It was at 85Hz before the upgrade. I guess it could've gone worse, according to some complaints I've seen. [13:56] Harmonium, which nvidia card ? . My 7600gt doesn't allow anything over 54hz , how much tyhat has to do with the monitor's capabilities is a mystery to me. [13:56] Harmonium: what is the problem? i use nvidia here === stefano is now known as Climber === Climber is now known as Climber89 [13:58] i have 9400, it allows only 60 at 1280x1024, but allows 85hz on 1024x768 [13:58] It's a GeForce GT 430. It was working well in 11.10. The refresh rate won't stay in the setting I want it. === Climber89 is now known as Climber [13:59] hi! [14:03] It's a simple problem to explain. It *looks* like a setting that's not getting saved. But other than sudo it, I don't know much more. [14:04] set the refresh rate to whatever you want, ask it to save xorg.conf, but not to its usual place, any temporary place, and use pastebin to show us the content of this saved xorg.conf [14:09] Alright. Never used pastebin before. Is this right? http://pastebin.com/wpqNgcPY [14:13] alright, you have a line that reads : Option "metamodes" "1280x1024_85 +0+0; 1280x1024 +0+0" [14:13] change it to become: Option "metamodes" "1280x1024_85 +0+0" [14:13] and save the file (using sudo) to its usualy place, /etc/X11/xorg.conf [14:14] and check if the screen starts at 85Hz everytime afterwards [14:18] Hamra: OK, I just did that. As soon as a background process I got running stops, I'll restart and check it out. Thanks for your help. :) [14:19] you're welcome :) [14:20] Harmonium: just to be safe, what usually happens with you, is after a reboot, or X restart, your screen goes back to low refresh rate... but when you manually set it to 85Hz, it accepts it and works fine with it, right? [14:22] Both restarting the machine or just logging out back to GDM/KDM reset the refresh rate back to 60; but if I set it to 85 it remains that way till I log out. [14:23] alright, sounds good... checking because the last thing we want is a forced refresh rate that doesnt actually work... [14:32] Hamra: logging off didn't work. The problem is still there. But the xorg.conf setting is remains changed (ie, it didn't revert back to how it was) [14:34] * BluesKaj thinks this an interesting discussion , but wonders how the monitor frame rates are affected [14:36] * Hamra is confused [14:37] I didn't actually reboot. Just logged off and back on. Should I restart the machine? [14:38] no, not necessarily, logging off restarts the X server [14:39] can you pastebin the file /var/log/Xorg.0.log ? [14:39] That's what I thought, but I was expecting to be wrong. [14:41] The file is rather long and it goes a bit back. How much should I paste? [14:43] the last 50 lines, i guess [14:45] There it is: http://pastebin.com/fRUuq1mm This one I don't understand, though. [14:49] nothing of value i'm afraid, can you pastebin the entire file? [14:54] OK, here's the whole file: http://pastebin.com/8LTisX3H === anikthink is now known as anikg [14:58] lines 142 and 143 explain it [14:59] though i have no idea how to disabled EDID [14:59] in short, your screen is telling the driver it cant support 85 Hz, yet it doesnt mind it when set :S [14:59] and i'm afraid i have to go... [15:00] Oh, OK. Thanks for your help! I guess I can look into it now. [15:09] Harmonium, are trying to set up the higher refresh rate to give your games cleaner images during the action? I'm just curious. [15:18] oh well, too late ..odd that the tab auto finished his nick after he left tho === chachan__ is now known as chachan [16:12] boa tarde [16:15] !br | shadowdf [16:15] shadowdf: Por favor, use #ubuntu-br para ajuda em português. Para entrar no canal por favor faça "/join #ubuntu-br" sem as aspas. Para a comunidade local portuguêsa, use #ubuntu-pt. Obrigado. [16:15] BBL [16:32] which channel the kubuntu Brazil?? === rdponticelli_ is now known as rdponticelli [16:38] !br | shadowdf [16:38] shadowdf: Por favor, use #ubuntu-br para ajuda em português. Para entrar no canal por favor faça "/join #ubuntu-br" sem as aspas. Para a comunidade local portuguêsa, use #ubuntu-pt. Obrigado. [16:43] Hi, how can I get entire Desktop on X over ssh? Single applications already work [16:59] Hi [17:00] Any Brazilian? [17:00] !br | lucheol [17:00] lucheol: Por favor, use #ubuntu-br para ajuda em português. Para entrar no canal por favor faça "/join #ubuntu-br" sem as aspas. Para a comunidade local portuguêsa, use #ubuntu-pt. Obrigado. === michael is now known as Guest68158 [17:39] hi, trying to solve a problem for a friend and yet getting nowhere fast.... my friend formatted a usb flash drive to fat 32.. if im aware thats for windows os [17:40] the flash drive itself is a sandisk cruzzer.. it has no lockable methods attached to the device... [17:40] what were trying to doi.. is fix it so it can mount writtable instead of read only.. === Guest14646 is now known as evilytwisted [17:41] doing chmod /dev/sdb1 doesnt work [17:41] nor obtaining root access and changing the file device directly.. [18:44] hello everyone. [18:45] i am having a problem installing flash player in kubuntu 12.04, can any one help me? [18:47] i installed kubuntu 12.04 yesterday, i cant figure out how to install flash player. [18:48] help help help help help help help help help ........................................................ [18:49] ANYBODY THERE ................................................... [18:49] patience raj [18:49] OK [18:49] raj: open the package manager (muon). search for flash, click install [18:51] its already installed [18:51] but its not working [18:53] jussi: status says its already installed [18:57] raj: which site are you having trouble with? and have you restarted your browser since... [18:58] Good evening [19:13] hey guys, I'm having issues with a lenovo T410 laptop not wanting to connecto to my projector via the external monitor port; any suggestions for getting them to play nice? [19:14] Hey morgajel what does xrandr say about the projector, does he see it? [19:14] Display and Monitor in system settings is only showing the local screen, as if it doesn't see the video port or attached projector at all [19:14] xrandr -q shows only the local screen [19:15] morgajel: which graphics card? [19:15] morgajel: And without any arguments? Only show the local screen not any other connection? [19:15] jussi: 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [NVS 3100M] (rev a2) [19:16] lordievader: same thing, just the default screen and a listing of it's configurations [19:16] morgajel: and have you got nvidia drivers? or using nouveau? [19:17] morgajel: No other disconnected connections either? Have you installed the nvidia driver? [19:17] jussi: using the nvidia drivers [19:18] hrm... let me check somehting [19:18] morgajel: tried the nvidia utility? [19:18] morgajel: You cannot enable it in the nvidia x server config utility? [19:18] (nvidia-settings) [19:18] that's what I'm checking [19:18] BINGO [19:18] :D [19:19] just remember what linus said about nvidia... ;) [19:19] yeah, I know [19:19] I'm watching the Q&A right now. === kubuntu is now known as Guest81912 [21:03] Heya's.. [21:08] hi rottingdead [21:08] are you dead or rotten or some of both? [21:09] Some of both, hehe. [21:09] :D. anything else ok? [21:10] Of course.. Decided to dual boot, and somewhat advanced with fdisk, but got stumped on the Extended part, so I let Kubuntu do it.. [21:11] well, i usual make a seperate partition for home another for the system, that way i can install anytime a new system [21:11] without touching my home [21:11] and still a bit of swap [21:11] Joit: Yeah, I have Windows on /dev/sda1 and /dev/sda2, Win7 uses 2 partitions, I made an Extended on /dev/sda3, but perhaps I'm supposed to choose partition 2 to make the Extended ? [21:12] I'm normally a Gentooer, but don't feel like waiting hours for that, heh.. Slow dual core cpu, 2.7 Ghz CPU. [21:12] what do you have at sda2, just datas? [21:13] /dev/sda2 is the main Windows, C:\ D:\, etc., etc. [21:13] sda1 is the backup partition or something Windows makes. [21:14] i know w2k it made a little partition for its system, but its a to small partition to make another extended there [21:14] Despite the fact Gentoo installs from Sources, it's not really that bad, all about optimizations. [21:15] I used to have a second hard drive, but it decided to say, "Failure is imminent." =(. [21:15] i didnt try it before, i like the amount of kubuntu, and that enough peoples work on it [21:15] *gentoo [21:16] Is Canonical going to start charging? I think I heard that somewhere, which they can't, it would be illegal, do to it being GPL'ed. [21:16] i cant answer that sorry [21:17] Joit: Yeah, who knows, I think I heard something about that, or I was just dreaming one day, lfao. [21:17] lmfao** [21:17] /me forces chanserv to randomly poking arund [21:18] Guess I'll head to google on the fdisk extended partioning. [21:19] yeah, and not sure, if fdisk care if there are datas on the new space or not [21:19] someone mentioned once, he could manage it, to mess up his space [21:22] Didn't realizee this, but fdisk goes by cylinders.. I don't know a lot lot about fdisk, just how to make 4 primary partitions, but trying to keep my Windows Partitions. [21:23] I guess I can make a new primary make that my /boot, and make the 4Th primary my extended, no ? [21:24] What I waas trying is just making an Extended on /dev/sda3 as 150Gib.. [21:27] Oh oh, I do use up all 3 first, then on /dev/sda4 make that my Extended. === LordOfTi- is now known as TheLordOfTime === michael is now known as Guest24923 === hadrian_ is now known as hadrian [23:05] Hello, if this is not the place to ask, please point me in the right direction so that I don't break any rules, thank you. I got 2x 5770's in Crossfire mode, and I have two monitors. One main monitor connected to the DVI output (Catalyst identifies it as monitor 2), and a secondary monitor (TV) connected to the HDMI output, all on the same card (Catalyst identifies it as monitor 1). However, I seem to be unable to simply "swap" the monitors, [23:05] using the extend feature. It will only use my TV as the primary monitor when using the extend feature, or have the Plasma "bar" on the secondary (TV) monitor and the Plasma "Widgets" on the main monitor (DVI). In windows, this is a non issue as Catalyst simply configures it as to I have my DVI monitor as my main, and my HDMI monitor is an extension of that. Why can't I do the same in Kubuntu 12.04? Is there a workaround for this? === michael is now known as Guest51050