[00:36] tet === newbie is now known as Guest25857 [00:47] hey guys... can anyone help me, i'm having a problem with rescuing my installation.... I have an encrypted LVM setup, It had 2 physichal disks in the encrypted LVM, I deleted the partition on one of the disks and now it won't start up.... Is there anyway to remove the disk from the LVM setup and get it to boot again? I don't think anything was on the disk. [01:26] I have Konsole set as Show a Launcher When Not Running, on the Icon-Only Task Manager (taskbar). When I reboot when Konsole was running, it starts up again since the session is saved and restored. The taskbar thinks it's not running though so clicking the icon starts a new instance. [01:26] On the other hand there is no "running" icon for Konsole, so it's employing contradictory logic. [01:27] Or it doesn't know that there is a Konsole application running, period. === pangolin is now known as IdleOne [01:45] Anyone know how to get the live walpaper or dream desktop going in kde 4.9 beta [02:05] hi all [02:27] Anyone else have a few quirks when installing KDE 4.9 b2? [02:30] Specifically, from what I've observed so far, Akregator and Muon were uninstalled during the process. Not sure what else may have been as I just updated === EricAndr_ is now known as EricCubixCloud === EricCubixCloud is now known as EricAndrews === EricAndrews is now known as EricCubixCloud [03:05] I have Konsole set as Show a Launcher When Not Running, on the Icon-Only Task Manager (taskbar). When I reboot when Konsole was running, it starts up again since the session is saved and restored. The taskbar thinks it's not running though so clicking the icon starts a new instance. [03:05] On the other hand there is no "running" icon for Konsole, so it's employing contradictory logic. [03:05] Or it doesn't know that there is a Konsole application running, period. === administrator is now known as Guest41708 [05:27] Package requirements (gtk+-2.0 >= 2.4.0 libglade-2.0 glib-2.0 gthread-2.0) were not met: [05:28] got this on try to compile xvidcap for kubuntu 12.04 [05:28] is there a 64bit deb version of xvidcap [05:28] sudo aptitude install gtk+-2.0 >= 2.4.0 libglade-2.0 glib-2.0 gthread-2.0 [05:28] doesn't resolve this === kush is now known as kish === IdleOne is now known as Guest52467 === tikfreenode is now known as Tiktalik === Tiktalik is now known as tiktalik === tiktalik is now known as Tiktalik [09:55] https://bugs.launchpad.net/ubuntu/+source/gnome-terminal/+bug/975227 [09:55] Launchpad bug 880734 in gnome-terminal (Ubuntu) "duplicate for #975227 gnome-terminal window changes size to one-line in KDE" [Undecided,Confirmed] [09:55] it works only if the rule is called "Gnome-terminal workaround" [09:55] otherwise not... [09:55] really? [10:10] I am having a problem with my sound. I completely lost it within the last couple of weeks. The last time I had my speakers on was 2 weeks ago. I ran aplay -l in Konsole. Here is the output. http://paste.ubuntu.com/1053994/ I've been searching for a couple of days now, but nothing seems to be working. I would appreciate any help. === pangolin is now known as Guest94195 === Guest94195 is now known as IdleOne === db is now known as dominikb [11:23] where is kjots data stored now? i cannot find it anywhere in the akonadi mysql server. any ideas? [12:18] im on kubuntu 12.04....... i cant convert any stuff using Hnad brake [12:18] hand* [12:20] i want to convert some files to .mp4 tp be playable in mobile device [12:21] to* [12:37] damn... when I try to re-enable my second screen after a sleep kde just freeze [12:37] How can I get some log about that crash? === lahwran- is now known as lahwran [12:42] aboudreault: check /var/log/Xorg.0.log /var/log/syslog and /var/log/dmesg [12:43] L3top, ok, will reproduce it and check that [12:56] im on kubuntu 12.04....... i cant convert any stuff using Hand brake [12:57] i simply want to convert some files to .mp4 [12:57] sky100: sudo apt-get install kubuntu-restricted-extras [12:58] did it [12:58] sky100: have you added medibuntu repository ? [12:58] !medibuntu [12:58] medibuntu is a repository of packages that cannot be included into the Ubuntu distribution for legal reasons - See http://www.medibuntu.org [12:58] Peace-, but still cant do conversions [12:58] handbrake uses ffmpeg i guess [12:58] converting but not working in my mobile device [12:58] ffmpeg -codecs 2>&1 | grep aac [12:58] ah... [12:59] well you mobile device could have a specific codecs bitrate [12:59] says unsupported file format .. [12:59] you need to find out [12:59] so you have choosed a bad format [13:00] to find out you just need to use a video that you phone handle well [13:00] so for example ffmpeg -i video_that_plays_well.mp4 2>&1 | grep -i stream [13:01] Peace-, just a min [13:01] im giving u the file name i was trying to convert [13:01] Anyone know how to get the dreamdesktop live wallpaper going in kde 4.9 beta [13:02] "the Bodyguard Ending.mp4 [13:02] The* [13:02] it was a downloaded file from you tube [13:02] so how to write the command line to use ffpeg [13:03] ffmpeg [13:03] omfg [13:04] sorry.. [13:04] could not get u Peace- [13:05] ok [13:05] let me write down the command line & show u [13:07] ffmpeg -i The Bodyguard Ending.mp4 2>&1 grep -i stream [13:08] Peace-, is that right ? [13:08] where to use that command ..peace [13:09] hello i'm a newbie, a while ago i was browsing thenation.com and then i noticed on the firestarter status tab that i was connected to three hosts 91.189.92.191/176/181 on ports 44441 and 51501 (unknown services). previously i only see http or https on 80 and 443 when browsing. is this something that i should worry about? [13:10] sky100: konsole [13:10] Hey all [13:10] ok === hadrian_ is now known as hadrian [13:11] but was my command line was right .. please check [13:11] -was [13:11] ffmpeg -i The Bodyguard Ending.mp4 2>&1 grep -i stream [13:11] sky100: missing | after 1 [13:12] oh ok [13:12] after conversion where to look for the converted file [13:16] Peace-, i typed that in konsole .. [13:16] pressed enter ..but nothing happens [13:17] you typed bad then [13:17] sky100: maybe you have forgotten the path of your files [13:18] its in Home>dwhelper... [13:19] so then you have to put the path... [13:19] sky100: http://paste.kde.org/505826 [13:19] ok [13:19] can anyone tell me what this means [13:20] CMake Error at /usr/share/cmake-2.8/Modules/FindKDE4.cmake:98 (MESSAGE): ERROR: cmake/modules/FindKDE4Internal.cmake not found in [13:20] you have not installed all -dev package for compile your stuff [13:20] i am facing this error when i use the cmake statment [13:20] i guess you need kdeworkspace-dev [13:20] kdelibs5-dev too [13:20] Peace- : does that not come under the Kubuntu desktop package? [13:21] dev packages are not installed by default [13:21] they are too much big and normal user doens't need them [13:21] Peace- : where do i get them? [13:22] sudo apt-get install kdeworkspace-dev kdelibs5-dev [13:23] cmake perhaps? [13:23] when i try to open a HTML written mail in kmail and allow HTML text for only that letter all text in the mail is gone? even when i have allowed HMTL in the mail? [13:24] Peace- : I am getting the following error: E: Unable to locate package kdelibs5-devclear [13:26] glee123: hahahahaha omg you are noob , you can't compile without knowing what you are doing [13:27] Peace- : Laugh all you want. Please just help me out [13:28] glee123, install make and cmake , then do some reading about compiling from source [13:28] apt-cache policy kdelibs5-dev | grep -i 'installed' [13:28] That is not acceptable Peace-. [13:28] sudo apt-get install kdelibs5-dev [13:29] ... [13:30] BluesKaj_ : Please tell me any link you know to read about compiling from source [13:32] L3top: dude i know how to compile stuff [13:33] glee123, we're not here to hold your hand , but this may be helpful , https://help.ubuntu.com/community/CompilingSoftware [13:34] BluesKaj_ : Sorry and thanks...... [13:34] !compile [13:35] Compiling software from source? Read the tips at https://help.ubuntu.com/community/CompilingSoftware (But remember to search for pre-built !packages first). Also read !checkinstall [13:35] glee123: sudo apt-get install kdelibs5-dev kdebase-workspace-dev libqt4-dev kdelibs5-dev [13:35] that shoudl be enough === hass is now known as trigun [13:35] *should* [13:38] I didn't suggest otherwise Peace-. Laughing at people and calling them names because they do not know something you do, is not ever acceptable in support. [13:38] L3top: compiling is not easy [13:38] and it's not reccomended . [13:39] expecially if one doesn't what he is doing [13:40] Peace- : LEARNING..... I doubt you hit the earth with a perfect knowlege of compiling.... [13:40] It's pretty easy... you just need the prerequisites... and that does not change the fact that it is not an appropriate way to get the message across. Look, I have no authority here, it is just in the guidelines... so I was letting you know, if you did not, that that is frowned upon. Not trying to have an argument. [13:40] L3top: ok so answer him [13:41] L3top: laughing is not an offonce in my world [13:41] so ... [13:41] You did already... and the path I was taking was to show him how to figure this sort of thing out on his own in the future. [13:42] Laughing AT people, followed by a degrading name, is offensive everywhere in the world. [13:42] L3top: look i am here since 5 years , you should ask to an admin [13:42] How is Mars this time of year? [13:43] L3top: noob is a name used when one doens' know about some stuff [13:43] I do not expect any admin here will disagree with me. [13:43] you think is a degrading name ? your problem [13:43] I know what it means... noob. [13:43] i know too [13:43] . [13:43] L3top: call then [13:44] Peace-, stop digging yourself any further into the hole ..what you did wasn 't correct or nice [13:44] BluesKaj_: oh came on [13:45] because i have laughed and called him noob is not nice ? [13:45] everyone are noobs [13:45] Correct. It is impolite... and unprofessional. [13:45] in something [13:45] i don't get money L3top [13:45] Peace-, exactly ..only noobs are allowed to themselves noobs [13:45] i am not professional [13:45] call [13:46] i would like know if i was not here if he would get the answer [13:46] i am sure he would not get it [13:47] The inability to maintain a level of professionalism is a personal issue. Courtesy is free of charge... it is really all that is asked. Again, we are off topic. I am not going to argue with you, or explain polite behavior to you, that should have been handled by your parents. It IS what it IS... whether or not you agree. The end. [13:47] how do i upgrade from the command line [13:48] just apt-get upgrade? [13:48] sudo apt-get upgrade, but you should sudo apt-get update first. [13:49] apparently my system is alreayd doing the first part. i get a notification when i login [13:49] sudo apt-get install automake [13:50] hays_, notification is undependable , just sudo apt-get update manually [13:53] thanks all [13:54] im seeing the partitions like 30Gb . 29 Gb & so on .. how to get the number like >>media/0216b920-476f-4bd7-8205 [13:54] as linux shows up [13:56] !uuid [13:56] To see a list of your devices/partitions and their corresponding UUID's, run this command in a !shell: « sudo blkid » (see https://wiki.ubuntu.com/LibAtaForAtaDisks for the rationale behind the transition to UUID) [13:56] sky100, ^ [13:56] ok [14:01] & how to know abt the sizes [14:01] of the partitions [14:02] like "88BCBAEABCBAD1C4" >> is 29Gb & so on ... [14:05] sky100, open system settings >partition manager === twoEnemy93 is now known as twoEnemy98 [14:10] ok === bill is now known as Guest32162 [14:19] im so eager to use ffmpeg .. but just cant configure the command line [14:20] all i want is to convert a file into a 320x240 resolution [14:21] !path | sky100 [14:22] its saved in /Home/dwhelper/The Bodyguard Ending.mp4 [14:23] its in 480x356 resolution [14:23] the input file [14:23] sky100, you need to make sure that you have the correct path to the movie in the command string , like /home/yuorusername/Videos or some such [14:23] ffmpeg -i "~/dwhelper/The Bodyguard Ending.mp4" 2>&1| grep -i stream [14:24] The\ Bodyguard\ Ending.mp4 [14:24] and you get informations [14:24] thne you can transcode with those informations [14:24] or because it is quoted the escaping is not needed? [14:24] eys [14:24] yes [14:25] its loated in Home/dwhelper... [14:25] located* [14:26] sky is my username [14:26] winff is supposed to work as well, but it always errored out during conversion here [14:26] so it would be like.... [14:26] ~ indicates /home/$USER so it what he has would be: ffmpeg -i "/home/sky/dwhelper/The Bodyguard Ending.mp4" 2>&1| grep -i stream [14:27] so just use /home/dwhelper.... [14:27] if that is the path. [14:27] or ~/ [14:27] ok L3top .., i going to try out that [14:28] but i want to change the resolution in 320x240 [14:29] if his username is sky, then ~/dwhelper would be /home/sky/dwhelper... and he said its saved in /Home/dwhelper/The Bodyguard Ending.mp4 [14:29] I was just trying to clear the confusion that might cause if indeed it is not under sky... [14:34] my username is sky [14:34] "/home/sky/dwhelper/The Bodyguard Ending.mp4" 2>&1| grep -i stream [14:35] sky@sky-desktop:~$ [14:35] i did that in konsole but nothing happened [14:35] Where is the file? You said it was under /home/dwhelper [14:36] yes [14:36] if so, do not use sky. The confusion I am trying to clear up is that ~/ in your case would indicate /home/sky/ and if it is under /home/dwhelper you will not find it with that command... [14:36] ok [14:37] ffmpeg -i "/home/dwhelper/The Bodyguard Ending.mp4" 2>&1| grep -i stream [14:38] L3top, . it has worked .. has given out the infos [14:38] Stream #0.0(und): Audio: aac, 44100 Hz, stereo, s16, 108 kb/s [14:38] Stream #0.1(und): Video: h264 (Constrained Baseline), yuv420p, 480x360 [PAR 1:1 DAR 4:3], 472 kb/s, 25 fps, 25 tbr, 25k tbn, 50 tbc [14:39] now the conversion part [14:40] all is needed is to convert into a 320x240 resolution in .mp4 format [14:40] its in 480x360 [14:41] sky100: but are you sure the codecs is good ? [14:41] fps and bitrate are ok ? [14:41] yep [14:41] ok so it's easy [14:42] ic [14:42] ok [14:43] how to do it Peace- can u type it pls .. [14:44] once im accustomed , i will be using ffmpeg only for conversion [14:44] will not use handbrake .. [14:44] which never worked [14:44] i am writing wait [14:44] oh k [14:46] sky100: try this out ffmpeg -i YOURVIDEO.mp4 -acodec copy -s 320x240 -vcodec ibx264 -vb 472k OUTVIDEOPPATH.mp4 [14:47] sorrty [14:47] no prob [14:47] take ur time [14:47] sky100: try this out ffmpeg -i YOURVIDEO.mp4 -acodec copy -s 320x240 -vcodec libx264 -vb 472k OUTVIDEOPPATH.mp4 [14:49] will i have to mention the full video path in YOURVIDEO [14:49] "/home/dwhelper/The Bodyguard Ending.mp4" i guess [14:49] ffmpeg -i "/home/dwhelper/The Bodyguard Ending.mp4" -acodec copy -s 320x240 -vcodec libx264 -vb 472k "/home/dwhelper/The_Bodyguard_Ending.mp4" ? [14:50] sky100: what has written L3top shoudl work for you [14:50] ok [14:50] thanx a ton [14:51] then the converted video would be saved in dwhelper .. [14:51] The_Bodyguard_Ending.mp4 is not the same name of inpu that has spaces [14:52] ok [14:53] i copied & pasted the same in konsole .. but its giving out this ..." THIS PROGRAM IS DEPRECATED *** [14:53] This program is only provided for compatibility and will be removed in a future release. Please use avconv instead. [14:53] /home/dwhelper/The Bodyguard Ending.mp4: No such file or directory [14:54] Did you use quotes sky100? [14:54] oh yea [14:54] was it wrong.. [14:54] sky100: /home/dwhelper/The Bodyguard Ending.mp4: No such file or directory [14:55] it can't find the file [14:55] my poor [14:55] sorry [14:55] retrying [14:57] because you just got info from it [14:57] so... it should be there. [14:57] yes [14:58] im really confused why it showed No such file [14:58] hope have to mention the user name "sky" [14:59] /home/sky/dwhelper... [15:00] nope [15:00] its not working [15:00] my bad [15:03] sky100: ffmpeg -codecs | grep 264 [15:03] should i type that in konsole? [15:04] sky100: you canìt copy and paste? [15:04] i was asking that only [15:04] i meant copy & paste [15:04] ok [15:05] konsole rolls out this ... [15:05] THIS PROGRAM IS DEPRECATED *** [15:05] This program is only provided for compatibility and will be removed in a future release. Please use avconv instead. [15:05] D V D h264 H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 [15:05] D V D h264_vdpau H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 (VDPAU acceleration) [15:05] EV libx264 libx264 H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 [15:05] sky100: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation. [15:05] ok you have the encoder [15:05] so ffmpeg should work [15:05] it's just your own error [15:05] ok [15:05] my error [15:05] ?? [15:05] i dunno worng path [15:06] wrong [15:06] using same path [15:06] ok ... untill you get this message [15:06] /home/dwhelper/The Bodyguard Ending.mp4: No such file or directory [15:06] it doesn't find the file [15:08] yes [15:08] its showing like that [15:10] but . while i pasted like "ffmpeg -i "/home/sky/dwhelper/The Bodyguard Ending.mp4" 2>&1| grep -i stream" it got me the infos [15:10] so it found the file [15:11] ffmpeg -i "ffmpeg -i "/home/sky/dwhelper/The Bodyguard Ending.mp4 -acodec copy -s 320x240 -vcodec libx264 -vb 472k "/home/sky/dwhelper/The_Bodyguard_Ending.mp4" [15:11] mm [15:11] ffmpeg -i "/home/sky/dwhelper/The Bodyguard Ending.mp4" -acodec copy -s 320x240 -vcodec libx264 -vb 472k "/home/sky/dwhelper/The_Bodyguard_Ending.mp4" [15:12] do we need to choose a diierent folder to get the converted one ? [15:13] gr8 [15:13] peace [15:13] its working [15:15] thanx a lot Peace- [15:15] let me how it comes out [15:15] see* [15:20] just did not support the video codec peace [15:20] my mobile device was unable to play the video.. but audio is there [15:20] showed " Unsupported video codec" [15:21] BRB [15:21] .....afk === nb__ is now known as Guest35754 [15:25] sky100: i said you before you should check a video that your cell plays well... [15:40] sky100: but are you sure the codecs is good ? [15:42] i'm using lucid if i use 12.04 repositories [15:42] is it possible [15:42] by totalling disabling lucid repositores [15:44] RocknRolla, dont use different release repos [15:44] RocknRolla, are you trying to upgrade to 12.04 , if so run sudo do-release-upgrade , in the terminal , but make sure you have no ppas listed in your package manager or /etc/apt/sources.list.d [15:45] what will happened? [15:45] RocknRolla, if you use precise repos with lucid? [15:48] RocknRolla, whats your exact question [15:48] bazhang: no [15:48] no RocknRolla , you can't replace the lucid repositories with precise repos , you'll end up with a very broken system once you upgrade [15:48] RocknRolla, never mix release repos. upgrade to precise if you wish to use precise repos [15:48] or vice versa [15:53] i having issue of system freezing [15:53] when i issue startx === pangolin is now known as Guest77463 === Guest77463 is now known as IdleOne [16:15] anyone know if it's possible to run multiple instances of yakuake. eg one on each of my 3 monitors? [16:15] hey guys [16:16] i'm using lucid which is using 2.9 version of xervervideo package [16:16] i want to update that to 2.14 [16:16] can it is possible [16:19] RocknRolla: You want to downgrade... what package? [16:19] no to upgard [16:19] 2.9 to 2.14 is a downgrade [16:19] xserver.xorg.video.intel [16:20] 2.9 is lower version [16:20] na? [16:20] No [16:21] RocknRolla: what exactly are you trying to do? [16:22] i'm using lucid [16:22] 2.14 is more recent than 2.9.. [16:22] which uses 2.9 version of xserver [16:22] 2.9 was the default in lucid, 2.14 in natty [16:23] but is it possible to use 2.14 in lucid [16:23] !info xserver-xorg-video-intel [16:23] xserver-xorg-video-intel (source: xserver-xorg-video-intel): X.Org X server -- Intel i8xx, i9xx display driver. In component main, is optional. Version 2:2.17.0-1ubuntu4 (precise), package size 234 kB, installed size 917 kB (Only available for amd64; i386) [16:23] Interesting. I am wrong RocknRolla. [16:24] RocknRolla: is there any particular reason you can't just upgrade to 12.04? I doubt you'll be able to find that package backported to lucid now [16:24] Sentynel: i'm using customized lucid [16:25] 2.9 don't support shadow option in there xorg.conf file [16:26] Hi, i have fresh install Kubuntu 12.04 + beta KDE: 4.8.90. And i have small trouble. Example: If i catch window with mouse cursor, and want to move this window somewhere, cursor go normal, but window is like freeze for 1 second. Is this bug, problem with my hardware or future? :) [16:26] that's way i'm thinking to download all depndance regarding this package and also this 2.14 package [16:26] RocknRolla: https://launchpad.net/~xorg-edgers/+archive/ppa/+index?batch=75&memo=225&start=225 [16:27] if you add xorg-edgers ppa you can update to the version you want. [16:27] is this ppa safe [16:27] define safe? [16:27] ppas are unsupported [16:27] it's official, but not necessarily stable [16:28] and, yes, unsupported like any ppa [16:30] Sentynel: then what happened to my already installed package [16:30] do i need to remove them before i install this packages from ppa [16:31] add the ppa and run updates as usual and it'll pull in updates from the ppa [16:31] Guest38385, kde 4.8.9 is not stable yet [16:31] BluesKaj_: And u think this can be reason? [16:32] yes [16:32] ok, thx [16:32] Guest38385,^ [16:32] can i back to stable without problems? [16:32] Guest38385, no\ [16:32] :D [16:33] ok, i will install one more time this night [16:33] thank u for help [16:33] hey everybody, I just installed Kubuntu 12.04 (amd 64) from the Alternate CD, I had no problems with the installation, but all I get when I try to boot is "error: file not found. grub rescue>" [16:34] I have only one harddisk and during the installation I selected MBR for grub [16:35] anybody encountered this? I would appreciate any help or idea... [16:36] reinstalling grub did not help :( [16:37] how to remove added ppa from system [16:38] RocknRolla: ppa-purge [16:39] and to list added ppa [16:39] RocknRolla, look in /etc/apt/sources.list.d , with root permissions [16:40] RocknRolla: ppa-purge, or the quick and greasy rm /etc/apt/sources.list.d/* and update. [16:40] if ppa is not listed there [16:40] too many cooks ") [16:40] BluesKaj_: ? [16:42] RocknRolla, i mean all the above suggestions will work , but they are coming from differnt ppl , hence "too many cooks" [16:43] afaics, you have exactly 2 different proposals here, so not too much yet ;) [16:44] szal, maybe to the trained observer :) [16:48] rm /etc/apt/sources.list.d/* this will remove everything [16:48] from source [16:48] RocknRolla: you would need to sudo, and it will remove ppas from the directory sources.list.d... not to be confused with /etc/apt/sources.list the file. [16:49] RocknRolla: ls /etc/apt [16:49] you will see what I mean [16:49] what is different in source.list.d [16:50] L3top: got it === nb_ is now known as Guest37702 === paolo_ is now known as faLUCE [17:23] Good evening [17:25] Good night [17:27] Hey RocknRolla how are you? [17:28] fine lordievader [17:29] What about you? [17:29] RocknRolla: I'm tired. [17:30] lordievader: why so? === kish_ is now known as rapedisney [17:30] RocknRolla: A week of hard work on a project for college. [17:30] lordievader: that's really hard [17:31] lordievader: what is your project [17:32] RocknRolla: We are making a coffee machine that you can control from the internet, so lets say you are at work going home, and when at home you want to have coffee, you just go to the website and order your coffee and when you get home there it will be waiting for you :) [17:32] great autoamation [17:33] does the coffee machine boil the water and insert the coffee as well ? :) [17:34] BluesKaj_: sorry to say but stop kidding [17:34] !rfc2324 [17:34] phone ahead an tell whoever answers to turn on the coffee maker [17:34] Hm [17:35] RocknRolla, a little humour is allowed :) [17:35] BluesKaj_: Yes, it is one of these: http://www.promart.nl/image/cache/data/Cloer/5030-400x400.jpg different model though... [17:36] BluesKaj_: i'm also kidding [17:36] chill [17:37] * L3top can control coffee maker from internet. === JMichael|work is now known as ShortwaveRadio === ShortwaveRadio is now known as Sh0rtW4v3 === rapedisney is now known as kish [17:47] later all , stuff to do === pangolin is now known as Guest23829 === Guest23829 is now known as IdleOne === tt is now known as Guest97473 === Jikan is now known as Jikai === Jikai is now known as Jikan [19:56] when i update i gate message like that [19:57] Current status: 0 updates [-3]. [19:57] what is this [20:00] RocknRolla: If in console you do: sudo apt-get update && sudo apt-get upgrade ... at the end of it all does it say something like 3 packages removed, or 3 packages not upgraded? [20:00] whay is -3 [20:01] in bracket [20:02] Probably 3 that could be removed or so [20:04] nut i installed three new package === Jikan is now known as Jikai === Jikai is now known as Jikan === yofel_ is now known as yofel [20:53] Hi! [21:25] hiya! xorg updates from sometime lastweek killed the trackpoint on my thinkpad (t520) anyone else have this happen? and find out why? [21:26] apt-get -f install, everything is in all the way. checked to make sure i didn't have a xtale xorg.conf (maybe something changed names) but I have none. touchpad is off in the bios, this is just the eraser thing === max is now known as Guest96343 === Jikan is now known as Jikai === Jikai is now known as Jikan === root is now known as Guest85217 [23:17] While it is POSSIBLE that xorg is at fault... why do you believe that this was the cause? [23:17] skomorokh: ^