=== ynezz_ is now known as ynezz
[09:42] <ogra_> janimo, just FYI, kernel and driver work fine together for me here ... on precise i dont even need console=tty1
[09:44] <lilstevie> ogra_: which kernel is that
[09:44] <lilstevie> I am assuming you mean for the ac100
[09:45] <ogra_> quantal ac100 archive kernel
[09:45] <ogra_> 3.1
[09:48] <lilstevie> ah
[09:48] <lilstevie> do you still have the plymouth issue?
[09:50] <ogra_> yes, likely bug 1018907
[09:50] <ubot2> Launchpad bug 1018907 in plymouth "plymouth in quantal on arm does only boot with black screen" [High,New] https://launchpad.net/bugs/1018907
[09:50] <ogra_> or something close to it
[09:51] <lilstevie> hm
[09:53] <lilstevie> and that also solved the tegra problem we have with precise
[11:09] <janimo> ogra_, so quantal is still likely to not boot or just has black splashscreen?
[11:09] <janimo> the latter is not showstopper and I can try out the dailies if it actually boots and works otherwise
[11:21] <angs> I have ubuntu server (12.04) image on my beagleboard-xM. Is it possible to upgrade it to the ubuntu desktop?
[11:26] <ogra_> janimo, i need to adjust the installer to nopt use bootimg.txt anymore since flash-kernel doesnt use that, before that change i doubt the images will work
[11:26] <ogra_> (working on that today)
[11:29] <janimo> ogra_, thanks!
[11:30] <ppisati> angs: sudo apt-get install ubuntu-desktop
[11:30] <ppisati> angs: so, what was the problem in the end?
[11:32] <angs> ppisati: thank you. the desktop image does not work on my board, however the server image works fine, I still do not know what is the problem
[11:40] <angs> when I type sudo -s, I get read only file system error http://paste.ubuntu.com/1065851/ how can I fix it?
[11:50] <ogra_> that doesnt look like the first part of the installer ran at all, check the size of your partition, is it nearly as big as the SD ?
[11:57] <angs> ogra_: http://paste.ubuntu.com/1065884/ shows warning for the read-only system for /etc/mtab. when I insert the sd card to my laptop, I also get an error that  "Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/mmcblk0p2,
[11:57] <angs>        missing codepage or helper program, or other error
[11:57] <angs>        In some cases useful info is found in syslog - try
[11:57] <angs>        dmesg | tail  or so"   this is dmesg | tail http://paste.ubuntu.com/1065890/
[11:58]  * ogra_ would suggest you start over, that looks like you removed the card during the resize (which runs before the installer)
[11:59] <angs> does it mean that image loading was unsuccessful?
[12:02] <angs> hmmm weird. I ejected the sd card from my laptop after the loading process was finished and I just ejected from the board after the installation finished. I will load it again
[12:04] <angs> btw, on the server image instruction it uses "dd bs=1M" however desktop image instruction says "dd bs=4M". what block size is correct?
[12:56] <angs> I installed the server image again, so it works fine now. there is no error. I cannot install ubuntu-desktop by  " apt-get install ubuntu-desktop" command http://paste.ubuntu.com/1065954/   however I installed ssh package and it works fine. do I need to write a different package name for the ubuntu desktop?
[13:17] <angs> I am also having a problem with apt-get update http://paste.ubuntu.com/1065975/ is it normal?
[13:20] <RoyK> angs: try resolving ports.ubuntu.com manually: host ports.ubuntu.com
[13:22] <angs> host ports.ubuntu.com  >> ;; connection timed out; no servers could be reached
[13:22] <angs> sources.list  is here  http://paste.ubuntu.com/1066003/
[13:22] <angs> do I need to edit something there?
[13:23] <RoyK> angs: then you need to setup correct dns client settings
[13:29] <angs> RoyK: it works fine now, thank you
[13:29] <angs> I mean after correcting the dns setting
[13:34] <RoyK> ok
=== zyga is now known as zyga-food
=== davidm` is now known as davidm
=== zyga-food is now known as zyga
=== rickspencer3_ is now known as rickspencer3
=== prp^ is now known as prpplague
[19:00] <angs> I installed ubuntu-desktop package on ubuntu-server. I rebooted it but I do not get any output in the monitor. do I suppose to configure something to get the video output?
[19:01] <angs> Also, lshw outputs [  870.848571] Unhandled fault: external abort on non-linefetch (0x1018) at 0xb6af5000                  Bus error (core dumped)
[19:10] <angs> or is there any prebuilt ubuntu-desktop image for beagleboard-xm that I do not need to configure anything. Just plugging the SD card would be enough to use the ubuntu desktop?
[19:43] <infinity> angs: http://cdimage.ubuntu.com/releases/12.04/release/
[19:43] <infinity> angs: The omap3 desktop image should work, I would think.
[19:43] <infinity> angs: I don't have an Xm to know for sure...
[19:44] <infinity> Maybe I should break down and buy one to replace my ancient Beagle of doom.
[20:41] <angs> infinity: thank you, I am able to use the desktop-image. my video cable was broken :S
[20:43] <angs> when I log in to the GUI, I get a dialog box to report a system problem, I does not accept my user password. It says incorrect password, however I type the same password that I log in and sudo -s
=== jkridner_ is now known as jkridner