[01:23] <OxDeadC0de> sometimes I wonder... I hooked up speakers to this newish tower I've got, it's got a intel/sigmatel audio controller, wasn't getting sound.. so I put the speakers into line out, opened alsa mixer, changed line out to line in/mic in, then back to line out, and it started playing (Still nothing through the main output though)
[06:18] <CBB> Quick question. Has anyone of you tried installing fog image cloning on the new version of kubuntu 12.04?
[07:25] <Smurphy> Morning
[07:58] <ct529> hi everybody .... I am trying to install kubuntu on a GPT formatted disk, but i have been unsuccessfull so far .... the installer does not see the GPT partitioning
[07:59] <ct529> in other words, it sees the partitions, but sees the total dimension of the disk  (750G) as 95G, and the partitions seem much smaller than what they actually are if I see them using gparted
[08:22] <Oxymoron> Hi, does anyone know any widget, patch or something that can switch between audio profiles?
[08:34] <hateball> Oxymoron: what are you trying to achieve?
[08:34] <hateball> different outputs/inputs etc?
[08:35] <Oxymoron> hateball: I want to have auto switch between anaog stereo profile and HDMI, depending if I have HDMI plugged or not in my laptop.
[08:36] <hateball> ah right, that sounds useful
[08:36] <hateball> doesnt it do that per default tho?
[08:36] <Oxymoron> hateball: For the moment I need todo systems settings -> multimedia -> phonon tab -> hardware profile and change manually each time.
[08:36] <Oxymoron> No, it doesnt do it per default. At least not on my system.
[08:36] <Oxymoron> It is pulseaudio.
[08:36] <hateball> I seem to recall that it switched both gpu and audio to hdmi when I plugged it on my Intel machine
[08:36] <hateball> but I may remember wrong
[08:37] <Oxymoron> I also have Intel. Have Intel HD Graphics 3000 and integrated audio Intel.
[08:37] <hateball> I know I was unable to only output the sound over hdmi, if I didnt also mirror/switch X to hdmi
[08:37] <hateball> but I havent fiddled with that stuff in a long while
[08:38] <Oxymoron> Waht I want preferable is to automaticly switch to correct profile depending if HDMI cable is in or not. Would be nice to have both audio and video, but audio is most annoying to change.
[08:39] <Oxymoron> There is commands in pulseaudio to switch between audio profiles. So basicly I would just need a script to check if hdmi is plugged in or not. Then auto switch profile.
[08:39] <hateball> I guess it could be scripted
[08:39] <hateball> :)
[08:39] <Oxymoron> I just do not know how to script it, should it be bash and be placed in my home directory or what? :S
[08:39] <ct529> hi everybody .... I am trying to install kubuntu on a GPT formatted disk, but i have been unsuccessfull so far .... the installer does not see the GPT partitioning
[08:39] <ct529> in other words, it sees the partitions, but sees the total dimension of the disk (750G) as 95G, and the partitions seem much smaller than what they actually are if I see them using gparted
[08:39] <eagles0513875_> hey guys how on earth does one install fonts?
[08:39] <ct529> hi everybody .... I am trying to install kubuntu on a GPT formatted disk, but i have been unsuccessfull so far .... the installer does not see the GPT partitioning
[08:40] <FloodBotK1> ct529: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[08:40] <ct529> ops sorry ....
[08:40] <ct529> slip of the tab ....
[08:40] <hateball> Oxymoron: Well it wouldnt really matter what language or where it's placed, but it'd need to be run in the background and poll if HDMI is connected or not
[08:41] <eagles0513875_> ct529: make sure you flag the partition in gparted as bootable
[08:41] <Oxymoron> hateball: Yeah, but how to make it run in background? :P
[08:41] <hateball> eagles0513875_: krunner -> type "fonts" and you should get the install fonts thingy
[08:42] <eagles0513875_> ty hateball
[08:42] <hateball> eagles0513875_: that is, if you have .ttf files to install manually. otherwise there are tons of packages in the repo
[08:42] <Oxymoron> hateball: Also I do not understand why it is not integrated already. WOuld be asbtract in Phonon to work on all video and audio cards settings. Then just a API for it.
[08:42] <Oxymoron> hateball: Maybe there is a command in Phonon to switch profiles?
[08:42] <hateball> Oxymoron: Well it's probably not implemented because not enough people, or rather the right people, havent been annoyed enough by the lack of it yet
[08:43] <hateball> Oxymoron: there probably is a dbus command
[08:43] <ikonia> Oxymoron: I used to do something similar within xorg for if my laptop was docked or not, you may want to look at the possability of an event driven trigger on a script
[08:44] <Oxymoron> hateball: Yeah i guess so. I have been trying to fix this long time, but I have not right experience how to make Xorg and Alsa scripts.
[08:44] <ikonia> Oxymoron: maybe look at udev or dbus depending on what will class as the event
[08:45] <Oxymoron> hateball: This is a thing Windows user migrate to Kubuntu or Ubuntu want to just work. When plugin HDMI it should change automaticly.
[08:45] <Oxymoron> ikonia: You knwo how xmbc does?
[08:45] <hateball> Oxymoron: You could file an enchancement bug on launchpad
[08:46] <hateball> This seems like something I may play with once I get some vacation time
[08:46] <Oxymoron> hateball: There is a thousand of them already. Nobody seem to care. I found a lot of bugs, suggestions on both ubuntu and kubuntu.
[08:46] <ikonia> Oxymoron: I don't know what xmbc does,
[08:46] <Oxymoron> ikonia: XMBC has some kind of script to switch HDMI automaticly.
[08:47] <ikonia> Oxymoron: check out the guys with xmbc, see if they can explain what they are using as a trigger
[08:47] <ikonia> Oxymoron: I'm surprised an "application" is changing the audio settings though
[08:48] <Oxymoron> ikonia: Yeah smart, I ask them :)
[08:48] <ikonia> Oxymoron: it will be interesting to know, that way you can see if it is usable outside of xmbc
[08:48] <Oxymoron> ikonia: There is some app or something to switch, I dont remember what the name is though. I just wish it worked automaticly.
[08:48] <ikonia> Oxymoron: it won't work automatically unless you tie that to an event driven setup
[08:49] <Oxymoron> ikonia: Yeah and i am very surprised anyone havent done it yet. HDMI isnt like yesterday technique
[08:50] <ikonia> Oxymoron: the event would be different for each desktop/setup it would be quite awkward to do for every user out of the box
[08:51] <Oxymoron> ikonia: Why would it be different for each desktop? :)
[08:51] <ikonia> Oxymoron: different hardware, different event triggers
[08:51] <Oxymoron> ikonia: Isnt that why Phonon exist for instance?
[08:52] <ikonia> I'm not sure what you mean ?
[08:52] <Oxymoron> I thought Phonon is some abstract layer to work with audio and video?
[08:52] <ikonia> I can't see how that can change hardware configuration though
[08:53] <Oxymoron> ikonia: Well it would abstract the hardware, so it doesnt matter which hardware I think? I am not sure though.
[08:54] <ct529> eagles0513875_: can you do that in gpt?
[08:55] <eagles0513875_> ct529: yes i have a 2tb hdd which it works just fine on
[08:55] <ct529> eagles0513875_: so you did first partition with gdisk
[08:55] <ct529> eagles0513875_: putting a gpt partition table on it
[08:55] <ikonia> Oxymoron: but the hardware config would need to change to do what you want
[08:55] <ct529> eagles0513875_: then created the partitions then formatted them
[08:56] <ct529> eagles0513875_: did you create a small initial 32Mb bootable partition?
[08:56] <ct529> eagles0513875_: for GRUB
[08:56] <Oxymoron> ikonia: How do you mean?
[08:56] <eagles0513875_> ct529: no i usualy let the installer auto partition and do all that for me
[08:56] <ct529> eagles0513875_: and are you using LVM under it or not?
[08:56] <ikonia> Oxymoron: if you change the output device, you're making a hardware config change
[08:56] <ct529> eagles0513875_: so the autopartition uses GTP rather than MBR????
[08:56] <ct529> eagles0513875_: since when?
[08:58] <Oxymoron> ikonia: Yeah, but isnt that abstracted in both Linux kernel and Phonon?
[08:58] <ikonia> Oxymoron: not really
[09:00] <Oxymoron> ikonia: Then I do not know
[09:07] <ct529> eagles0513875_: ?
[09:08] <eagles0513875_> im not sure ct529
[10:21] <bigbrovar> Hi guys, anyone using tor with kde systemwide proxy? I can't not get tor to work with chromium which uses the default kde proxy .. but same setup works perfectly with firefox
[10:30] <phoenix_firebrd> bigbrovar: what is tor?
[10:33] <bigbrovar> phoenix_firebrd: http://en.wikipedia.org/wiki/Tor
[10:33] <bigbrovar> phoenix_firebrd: oh .. not that tor ..
[10:34] <bigbrovar> phoenix_firebrd: http://en.wikipedia.org/wiki/Tor_(anonymity_network)
[10:37] <phoenix_firebrd> bigbrovar: did you change the proxy settings in chromium to "use system proxy configuration"?
[10:50] <CBB> Hey all, I have a little problem at hand. I am currently using a "HP Compaq 4000 pro" , with two BenQ 24" monitors but the one using the Display Port will not work. I am running kubuntu 12.04 32bit, anyone that could help me troubleshoot whats the source of this problem?
[11:06] <CBB> Anyone?
[11:18] <drostie> Hi guys. Dolphin keeps opening SVGs with Firefox even though I've told both it and KDE's File Associations to open in Inkscape (and eliminated Firefox from this list). What else in KDE might Dolphin be querying?
[11:22] <qbit> drostie: this happens with xml files and umbrello files too; a bug report against dolphin has been files I believe - so it is a known issue that needs fixing in dolphin
[11:23] <qbit> drostie: when I tried the same xml file in Konqueror file manager it worked as it should
[11:24] <drostie> Ah, so all XML files get interpreted as web links and get interpreted as the Default Applications > Web Browser > http/https application. o_O.
[11:25] <qbit> yes - in dolphin, but not Konqueror file manager
[11:25] <qbit> so I think this means it's a Dolphin specific issue and not a KDE -wide in general
[11:25] <qbit> at least that's my best guess at this point...
[11:26] <drostie> qbit: ok. is there a nice way to launch a KDE-compliant general purpose file opener from the command line? ^_^
[11:26] <qbit> drostie: just use Konqueror with file management profile
[11:28] <drostie> qbit: *sigh* apt-get install konqueror ;_;
[11:28] <qbit> drostie: I thought that should have been part of a basic install in KDE, maybe I'm mistaken there
[11:29] <drostie> actually honestly I'm not sure why I'm b*tching aside from having to customize the display attributes again.
[11:29] <drostie> qbit: rekonq is the new default browser in kubuntu.
[11:30] <drostie> qbit: seriously, this is a little absurd. I right now have Chromium, rekonq, konqueror, IceCat, Firefox, and Tor Browser all installed on my computer.
[11:30] <qbit> drostie: ah - OK - wasn't sure when they made that change as I don't use
[11:30] <drostie> I should just install lynx and call it a full house.
[11:30] <qbit> lol
[11:31] <qbit> drostie: there is a plasmoid widget that you can install in the kicker  bar at the bottom which allows to more easily select which profile konqueror opens as
[11:32] <qbit> drostie: it can be done with command line switches but I don't recall exactly the line
[11:35] <OxDeadC0de> you forgot google-chrome
[11:41] <BluesKaj> Hi all
[11:41] <mydogsnameisrudy> morning BluesKaj
[11:42] <BluesKaj> 'morning mydogsnameisrudy
[11:42] <BluesKaj> just started raining here
[11:42] <mydogsnameisrudy> yep more coming
[11:42] <BluesKaj> ok
[12:01] <drostie> aha, the bug is in kde-open. :<
[12:01] <drostie> it's not a dolphin problem.
[12:05] <BluesKaj> drostie, what bug ?
[12:05] <drostie> BluesKaj: when I click on an SVG it opens in Firefox. No matter what. Because it thinks XML documents are automatically http/https URLs.
[12:06] <drostie> well not "no matter what" -- it opens in whatever the http/https URL viewer is. But still.
[12:33] <floown_> hello
[12:33] <floown_> I have share a directory with Samba
[12:33] <floown_> but Dolphin ask me a password and a user
[12:34] <floown_> I have add this line security = share in [global] section in my /etc/samba/smb.conf
[12:34] <floown_> but it does not works
[12:37] <BluesKaj> where is the shared dir , floown_ ?
[12:37] <floown_> BluesKaj: mounted in /mnt/ntfspart
[12:38] <BluesKaj> external drive ?
[12:39] <floown_> BluesKaj: no, an sata disk
[12:39] <floown_> http://pastebin.com/6ckWcaQj
[12:39] <floown_> BluesKaj:
[12:40] <BluesKaj> is the sata disk listed in dolphin places ?
[12:41] <floown_> BluesKaj: yes
[12:41] <floown_> the disk is mounted
[12:43] <BluesKaj> floown_, i have a sata disk as well , no samba needed to acess the dirs
[12:45] <floown_> BluesKaj: sure, but I want to share this directory with an another pc
[12:46] <BluesKaj> is the other pc windows or linux ?
[12:47] <floown_> BluesKaj: another kubuntu
[12:47] <floown_> BluesKaj: dolphin has proposed to install samba when I try to share it
[12:48] <BluesKaj> then you don't need samba , either ssh or NFS would be better , NFS will mount the dir like it's on the other pc
[12:49] <BluesKaj> floown_, https://help.ubuntu.com/community/SettingUpNFSHowTo
[12:49] <floown_> BluesKaj: ok, so I better use NFS
[12:50] <BluesKaj> or ssh , it's your choice ...ssh is a bit easier to setup
[12:52] <BluesKaj> NFS is very quick floown_
[12:52] <floown_> ok, thx
[12:56] <BluesKaj> floown_, here the ssh tutorial if you want to take a look ,   https://help.ubuntu.com/community/SSH/OpenSSH/Configuring
[12:57] <floown_> ok ^^
[13:40] <lena> Hallo
[13:40] <lena> spreek hier iemand nederlands toevallig?
[13:41] <Riddell> lena: /join #kde-nl or #ubuntu-nl  I think
[13:41] <lena> Thank's
[14:00] <drostie> Okay, my frustrations with dolphin/kde-open have been alleviated by writing a script in node.js to catch only the bizarre cases. I still prefer dolphin to konqueror. :x
[14:12] <ct529> I have been trying to install kubuntu on a GPT partitioned disk for 4 hours, and the installer does not see the partitions .... it does not even see the full extension of the disk
[14:12] <ct529> can please anyone help me out here?
[14:26] <natman> is there any way to get a tranparent theme for oxygen ( ala aero glass in win7 )
[14:52] <drostie> natman: any theme can be made partially transparent, I believe.
[15:05] <Num83rGuy> natman: There is a PPA for oxygen transparent.  Hold on while I find it.
[15:06] <Num83rGuy> NVM he left
[15:07] <phoenix_firebrd> hello everyone
[15:08] <svt_raiden> Hi all
[15:09] <svt_raiden> does anyone knows how to make videocast by capturing my screen in Kubuntu?
[15:09] <svt_raiden> what is the best software for that?
[15:10] <svt_raiden> anyone?
[15:11] <phoenix_firebrd> svt_raiden: try recorditnow
[15:11] <svt_raiden> phoenix_firebrd: Thank you - I will try it now
[15:12] <Num83rGuy> svt_raiden: I use Kazam
[15:12] <svt_raiden> are there some settings that I have to adjust with Recorditnow or Kazam, in order to achieve the best quality and fluent picture and sound?
[15:13] <svt_raiden> I have tried record before, and have experienced video/audio missplacing...
[15:15] <phoenix_firebrd> svt_raiden: use the fps settings to increase or decrease the quality of the video in recorditnow
[15:15] <svt_raiden> thanks, phoenix_firebrd
[15:15] <svt_raiden> :)
[15:16] <phoenix_firebrd> svt_raiden: the audio video mismatch maybe due to low cpu processing power or a codec error
[15:16] <phoenix_firebrd> svt_raiden: if you get such problems , try reducing the fps
[15:17] <svt_raiden> thank you for bringing this up, phoenix_firebrd,...  codecs... where to get them and which one to use? The goal is creating a videocast for youtube
[15:18] <phoenix_firebrd> svt_raiden: i think youtube accepts ogv, and the codec for ogv is present by default
[15:19] <svt_raiden> Thanks again! :)
[15:19] <phoenix_firebrd> svt_raiden: you could also try kazam and see which suits you best
[15:19] <phoenix_firebrd> svt_raiden: yw
[15:26] <BluesKaj> the pastebin widget keeps launching a new instance of Firefox , rather than opening a new tab ..can't find any options in FF or pastebin to change that behaviour ...any ideas?
[15:29] <vsrao> Hi. My monitor goes to sleep whenever I play a video using VLC, every 2 minutes. I've tried changing power settings and screensaver settings.
[15:30] <genii-around> vsrao: Perhaps also try: xset -dpms       to turn off monitor's own built-in power saving
[15:31] <vsrao> genii-around: Okay, I'll try that.
[15:31] <Avihay> is it because kubuntu doesn't use xscreensaver anymore?
[15:31] <Avihay> i mean KDE
[15:35] <vsrao> genii-around: That didn't work.
[15:39] <Avihay> vsrao: I have set my screen bottom right corner action to inhibit screensaver, and whenever VLC messes up with inhibiting I use that, but I'm still on 11.10 so ymmv
[15:39] <genii-around> Hm
[15:39] <Avihay> 11.10/4.8
[15:39] <vsrao> Avihay: Yeah, I'm on 12.04.
[15:40] <Avihay> I guessed so. still worth a try, maybe they didn't break that functionality... like in previous version... and then neglected to fix it for a year and a half...
[15:40]  * Avihay is not resentfull
[15:43] <BluesKaj> The only setting I use in power management is screen energy saving set to 180 mins , nothing else is enabled , same goes for the screen saver  and I don't get anyinterruptions during movies with VLC or dragonplayer
[15:43] <Avihay> there we go: System Settings -> Workspace Behaviour -> Screen Edges. on the corner: Prevent Screen Locking
[15:43] <phoenix_firebrd> BluesKaj: try this switch in the launch command of firefox
[15:44] <phoenix_firebrd> BluesKaj: "-new-instance"
[15:45] <jds> Was he asking about screen locking or power saving mode while watching a movie, something like that? Because I was going to ask the same thing.
[15:45] <BluesKaj> it's not FF that's causing it phoenix_firebrd , it's the pastebin widget
[15:45] <Avihay> and that works for 4.7,4.8 and hopefully later and for  4.5 and earlier versions but not for anything in between, where prevent screen locking...  locks the screen immediately...
[15:45] <Avihay> I might be off on the version numbers
[15:46] <Avihay> jds, yes
[15:46] <BluesKaj> phoenix_firebrd, and I'm trying prevent a new instance not launch one .
[15:46] <BluesKaj> trying to
[15:47] <jds> I'll just disable screen locking then. Thanks Avihay.
[15:47] <Avihay> sec
 vsrao: I have set my screen bottom right corner action to inhibit screensaver, and whenever VLC messes up with inhibiting I use that, but I'm still on 11.10 so ymmv
[15:48] <phoenix_firebrd> BluesKaj:  oops "-new-tab " this is the right one
[15:48] <Avihay> jds ^^
[15:52] <phoenix_firebrd> BluesKaj: i am using chromium as by default browser and each link opens with a new tab instead of a window
[15:52] <phoenix_firebrd> BluesKaj: have you selected "open in new tab" in firefox's tab preference ?
[15:55] <BluesKaj> phoenix_firebrd, yes , it was already chosen , that's why I was aking
[16:03] <lordievader> Good evening
[16:04] <BluesKaj> phoenix_firebrd, I dfound a workaround to the pastebin widget ..FF has a pastebin addon which works great , https://addons.mozilla.org/en-US/firefox/addon/pastebincom/
[16:05] <BluesKaj> hey lordievader
[16:05] <phoenix_firebrd> BluesKaj: nice
[16:05] <lordievader> BluesKaj: Hey BluesKaj how are you?
[16:05] <BluesKaj> lordievader, just fine thanks , and you?
[16:06] <lordievader> BluesKaj: I'm doing well, thanks.
[16:06] <BluesKaj> good ...BBL ..noon news here , so i have to switch inputs on this monitor/TV
[16:08] <jds> Anyone here using Alpine?
[17:12] <noaXess> hey all..
[17:13] <noaXess> any idea about to resolve this locale problem: http://paste.ubuntu.com/1073414/
[17:13] <Joit> hello axess
[17:13] <Joit> go to systemsettings and look there?
[17:13] <Joit> or install language support
[17:15] <noaXess> Joit: i'm on cli ;)..
[17:15] <noaXess> no frontend.. kust console
[17:17] <noaXess> i think i just need to set LANGUAGE and LC_ALL
[17:17] <Joit> i am no hacker :P
[17:17] <Joit> but there is a command for it
[17:17] <noaXess> i know.. searching..
[17:17] <Pici> !locale
[17:17] <Joit> set locales something like that
[17:18] <Joit> noaXess: can you open your browser?
[17:18] <noaXess> on my machine, yes ;).. but not on the remote machine.. it's a server.. upgraded it to 12.04
[17:19] <Joit> ah, i wasnt sure if you can open the links
[17:19] <noaXess> Joit: here i'm on my machine.. open all what you want ;)
[17:20] <Joit> pls open the national treasure bank for me, i would have use for some bags full from there
[17:33] <noaXess> got it.. seems that on upgrade to 12.04 language-pack-de was purged..
[17:42] <Joit> noaXess:  good
[17:56] <lordievader> Good evening
[17:57] <jussi> SO, I suspended to ram, went home, few hours later unsuspended and the wireless is broken. I cant enable it in NM, Hardware switch doesnt do anything (function+F9 on this dell). I did do an update this morning before suspending, but I didnt look closely at the update. anyone up for debugging with me?
[18:15] <natman> is there any way to get a tranparent theme for oxygen ( ala aero glass in win7 )
[18:15] <lordievader> natman: Did you check kde-look.org? I think that is the easiest way.
[18:16] <natman> lordievader:  ya had a look there and found one, but cannot get it to work, its http://kde-look.org/content/show.php/?content=127752
[18:20] <lordievader> natman: How did you try to install it, isn't there an easier one, this you need to compile...
[18:22] <jussi> I never got anyof those transparent themes to work.. natman also try #KDE
[18:22] <natman> lordievader: ya i tried to compile it, there was no other one i found
[18:22] <fritz> hi
[18:22] <natman> jussi: cool thanks, perhaps better to wait for kde4.9
[18:22] <lordievader> natman: And how did the compiling go?
[18:22] <lordievader> fritz: Hey, how are you?
[18:23] <natman> lordievader: CMake Error at /usr/share/kde4/apps/cmake/modules/FindPackageHandleStandardArgs.cmake:198 (MESSAGE):
[18:23] <natman>   Could NOT find KDE4Workspace (missing: KDE4Workspace_CONFIG) (Required is
[18:23] <natman>   at least version "4.8.40")
[18:23] <natman> Call Stack (most recent call first):
[18:23] <natman>   /usr/share/kde4/apps/cmake/modules/FindKDE4Workspace.cmake:70 (find_package_handle_standard_args)
[18:23] <natman>   CMakeLists.txt:7 (find_package)
[18:23] <FloodBotK1> natman: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[18:23] <fritz> im ok, thnx :)
[18:24] <natman> lordievader: http://paste.ubuntu.com/1073519/
[18:24] <lordievader> natman: Did you install the needed packages? "gcc-c++, git, cmake, kdebase-workspace-dev, libxrender-dev, libx11-dev"
[18:25] <natman> lordievader: well in the how to it says to run "sudo apt-get install build-essential cmake kdelibs5-dev kdebase-workspace-dev libxrender-dev libx11-dev git" for the things you need
[18:27] <lordievader> natman: Run this command to install them: sudo apt-get install build-essential cmake kdelibs5-dev kdebase-workspace-dev libxrender-dev libx11-dev git
[18:28] <natman> lordievader: ya i already have them
[18:29] <lordievader> natman: Could you check what version of cmake you have, the command for that is probably something like cmake -v
[18:31] <natman> lordievader: natman@orchid:~$ cmake --version
[18:31] <natman> cmake version 2.8.7
[18:34] <lordievader> natman: Hmm, well he is complaining about kde-workspace... Perhaps you could try a system update and try again after completion of the update.
[18:35] <natman> lordievader: :) ya did that also first time round, probably just not gonna happen for me. Its cool, thanks for the help anyways. I hope its in KDE 4.9
[18:36] <lordievader> natman: Only time will tell...
[21:28] <scottp> Hello? Does anybody know if Sourceforge.net has gone offline? I get no results found for any search there.
[21:30] <jsubl2> scottp: http://www.downforeveryoneorjustme.com/sourceforge.net
[21:32] <scottp> The site is up but I get no results in the search bar. Like there database is wiped. I'll try later.
[23:41] <Husar> Hi, someone know fix for metalic sounds from  flashplayer? 12.04, 64
[23:44] <geoff__> mute speakers
[23:55] <Husar> geoff__: first, mute you
[23:55] <geoff__> that won't fix anything