/srv/irclogs.ubuntu.com/2012/07/04/#ubuntu.txt

xezexalsay I want to add a PPA and I happen to have the maya/precise repos but yet it still says katya.  How can i make it say maya on default?00:00
xezexalthere must be some file to configure.....00:00
subz3r0like i said... ubuntu isnt mint... no idea00:01
subz3r0i would ask in the mint channel thO00:01
tehroflmaoerhey can someone help me with autocomplete with screen? it seems to have stopped working for me recently00:02
flymaci've another query too, this is the first install of Ubuntu i've done on a laptop, and only done one or two some years back on a desktop. The laptop has a 320gb drive installed but after install and booting to Live CD it shows up as 160gb. The kernal panic seems related to the boot partition too.00:02
amine_bonsoir a tous00:04
escottflymac, you need to tell us what the panic is00:06
amine_svp j arive pas a risoudre un probleme00:07
bzamine_: allez-vous a #ubuntu-fr00:08
Lymphocyteis it possible to make a filesystem on a file?00:09
amine_ok bz00:09
Lymphocytelike if i create a 10gb file i can create ext3 on it?00:09
bzLymphocyte: look up 'loopback"00:09
flymacescott - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)00:10
escottLymphocyte, for performance reasons make sure you create the image correctly. you need to tell the filesystem to preallocate the space, you dont want a sparse file00:10
Lymphocyteescott: fallocate good enough?00:10
Lymphocyteext4 can preallocate blocks for it without zeroing it out. is fallocate a sparse file thing?00:10
escottLymphocyte, fallocate is fine. you just need to be careful using something like dd if=/dev/zero of=.... because it might make it sparse00:11
escottflymac, are you in the initrd right now?00:12
escottflymac, the busybox? or are you on the livecd00:12
=== ubuntuser is now known as barrra
flymacescott, i whipped out the usb and rebooted to copy down the error, i'll try get it to initrd now00:13
=== adante_ is now known as adante
barrrahey there I am having trouble setting up the resolution on grub200:14
escottflymac, we can work from either. just trying to figure out where you are00:14
barrraCould it have something to do with the fact I am using LVM+crypt?00:14
barrraNo change on grub config seem to have any effect at all...  -.-00:15
escottbarrra, that should not affect the grub resolution. so long as grub is working. are you running update-grub?00:15
barrraescott, of course00:15
barrraescott, but I wondered if it would keep a cache copy of the cfg or something like that.00:16
flymacescott - booting back to live cd, im there now00:16
escottbarrra, unless its looking in a completely different place no00:16
barrraescott, this seems paranormal00:16
escottflymac, can you mount the installed system to /media/ubuntu00:16
barrraescott, tried to set nosplash to see if it even worked, and apparently it doesn't00:17
lnxslckhello guys00:17
lnxslckcan someone help me with nvidia card with optimus chip?00:17
barrraescott, I noticed to that even my locales got messed up after an update...00:17
escottbarrra, you might want to run the boot info script. perhaps grub is looking somewhere else00:17
killownis there a way to remove panel title bar from the secondary monitor?00:17
aguitelhow to fix this bug? conf file './etc/xdg/trolltech.conf' is not in sync with other instances of the same package00:17
lnxslcki installed bumblebee and still ubuntu doesnt recognize my cards00:17
barrraescott, (fresh instaled copy)00:17
barrra*checks logs*00:18
flymacescott, its mounting itself when i hit it in the GUI to /media/*crazy long hash*00:19
escottflymac, thats the UUID. going to be a bit of a pain to work with so lets make a symlink "sudo ln -s /media/[TAB] /target"00:20
xezexalwhat is the file which controls PPA version naming?00:20
harovalihi, I came accross a ubuntu Natty machine, whose repos don't exist anymore. How can I fix the apt setup ?00:21
escottflymac, then paste the output of the following commands. "grep vmlinuz /target/boot/grub/grub.cfg" "sudo blkid" "sudo ls /target/boot" and "sudo parted -l"00:21
Ben64!eol | harovali00:22
ubottuharovali: End-Of-Life is the time when security updates and support for an Ubuntu release stop, see https://wiki.ubuntu.com/Releases for more information. Looking to upgrade from an EOL release? See https://help.ubuntu.com/community/EOLUpgrades00:22
harovaliBen64: thanks, I don't really care if the machine is really up to date, I just want to ba able to install a very common package, namely cups-bsd00:23
trismBen64: natty isn't eol until october00:23
harovalitrism: so I believed00:24
Ben64well i figured it was since "repos don't exist anymore"00:24
trismharovali: pastebin your /etc/apt/sources.list00:24
escott!pastebinit | flymac easier than doing all the copy and paste00:25
ubottuflymac easier than doing all the copy and paste: pastebinit is the command-line equivalent of !pastebin - Command output, or other text can be redirected to pastebinit, which then reports an URL containing the output - To use pastebinit, install the « pastebinit » package from a package manager - Simple usage: command | pastebinit -b http://paste.ubuntu.com00:25
=== adante_ is now known as adante
* lnxslck anyone with bumblebee?00:26
flymacthanks - i'll work thru these steps for a minute00:26
AngelababyGood Day!00:33
lnxslckhello00:34
Angelababyhi00:34
=== mike_ is now known as Guest73418
Angelababywelcome00:36
Angelababylots of people here by no one talking...00:37
urgodfatherhello can someone help me figure out why i cannot live boot on this device http://www.cartft.com/catalog/il/77000:37
flymacescott, ok - took a while as had to get the ubuntu machine online00:37
escottflymac, thats fine00:38
flymacescott - results - www.pastebin.com/nZ8x0Xgx00:38
flymacill look into pastebinit too, sounds great00:39
Angelababyurgodfather, i don think the ubuntu is compatible with the hardware you have.00:39
escottflymac, that all looks ok.00:40
escottflymac, how old is this hardware?00:40
flymacescott, bahh, i was affraid you'd say that00:40
urgodfatherhello can someone help me figure out why i cannot live boot on this device http://www.cartft.com/catalog/il/770 when it boots, the graphics scan... kinda like when you record a crt on video but way faster where you cannot see anything00:40
flymacits a HP 620 laptop that was handed to me as a windows 7 virus ridden cast-off. Its a 2010 model, intel core 2 duo, integrated gfx00:40
extorHow on earth do I make a sudo user00:41
extorI have console access as root but unable to ssh as root and there are no sudo users00:41
jthanextor: There is a setting to enable/disable allowing root login via ssh.00:41
jthanextor: You can not "make" a sudo user.  Using the command "visudo" as root will bring up the file within which you can grant people access to the sudo command.00:42
escottflymac, thats not a problem. (was there any particular reason you installed 32bit not 64bit?)00:42
escottflymac, so that entry is offered to boot, but it panics when it cant find the root00:42
urgodfatheranyone?00:42
flymacescott - actually, no, no particular reason. i just downloaded what was in front of me first.00:43
urgodfathercould it be a kernel thing? personally, i think its a graphics thing... is there any way to reduce down the graphics to 800 x 480?00:44
goddardanyone used the fluendo codec pack?00:45
jthanurgodfather: I feel like nobody here has tried to use that device to run Ubuntu.00:45
escottflymac, you might download and run the boot info script00:45
escottflymac, http://sourceforge.net/projects/bootinfoscript/00:46
imnicholIs Ubuntu1 contact integration with Thunderbird still supported?00:48
ceti331join programming00:49
zykotick9imnichol: if you don't get an answer here - i'd ask in #ubuntuone00:49
flymacescott, pastebin.com/LnmQwmFw00:51
=== |_ocke is now known as i|_ocke
escottflymac, that all looks good. its not the boot configuration. can you reboot and try to read as much as you can about the panic00:52
flymacescott - right now its loading GRUB by default....00:54
flymaci have to chose first Ubuntu option in GRUB00:54
=== bazhang_ is now known as bazhang
amgadmadkourt00:54
flymacescott - line below reads Pid: 1, comm: swapper/0 Not rainted 3.2.0-23-generic-pae #36-Ubuntu00:56
escottflymac, when it panics does it drop you to the initrd? if it does you should be able to read the log with "dmesg | less"00:57
flymacno, all i have is a blinker, i cant input anything, its just hanging00:57
escottflymac, i need to know why the kernel couldnt find the disk01:00
flymacescott - got a little more info01:00
flymaci did a recovery boot, still not initrd but I can read the last few lines before the panic01:01
harovalitrism: I could solve the issue , which wasn't repo related. Thanks anyhow.01:01
flymacVFS: Cannot open root device "UUID=bla bla" or unknow-block(0,0)01:01
flymacPlease append a correct root= boot option; here are the available partitions:01:02
flymacescott, then it lists each partition, sda1 2 and 501:04
terminhellhowdy01:04
escottflymac, odd. the UUID is correct. you could switch it to /dev/sda1 and see if it boots, but that shouldn't be necessary01:04
flymacescott, the list of available partitions has only zero's next to each partition01:05
flymacescott, where i'm guessing it should find the UUID its looking for01:05
conleyHow can I set default applications from command line? Nautilus freezes up every time I try to change the default application for cr2 files01:09
flymacescott - changed boot options to /dev/sda101:10
flymacescott, it looks like i'm in01:11
flymacescott, saw a ton of odd stuff before it got there, but it did01:11
conleyedit mimeapps? okay.01:12
Saikidoen anyone know what the problem is when a webpage in tomcat6 says it s unavailable, but you knwo it exists?01:12
cNoNimhello all01:13
terminhellhi01:13
escottflymac, that really weird. not sure why it wouldn't work. there is a flag you can set in /etc/default/grub to tell it not to use UUID's and then you could rerun update-grub to make it permanent01:13
escottflymac, maybe check dmesg to see if there is any indication why you have to do this step01:13
cNoNimi install ubuntu and windows 7, but windows 7 freezes if boot from grub201:14
flymaccompiz keeps quiting unexpectedly now :(01:14
cNoNimwindows and ubuntu on same disk01:14
cNoNimif recove windows mbr windows boot properly01:16
jubobahello01:17
flymacescott - dude, thank you for your kind help and guidance. its way past my bedtime, i'll be back tomorrow night no doubt!!!01:17
jubobaI'm having problems with my microphone01:17
moduspwninshello juboba01:17
jubobait is not displayed in Input hardware01:17
cNoNimwho can help me?01:18
jubobanevermind, now it is (weird(01:18
Ragehello01:18
Rageoh01:18
RageI used the wrong account01:19
t0kenOk, so.  Can someone point me to some doc or provide insight as to how to get more than 1 virtualbox vm to work when they are using bridged mode to access the lan.  1 at a time works fine but two gives some permission errors.01:19
moduspwninscNoNim: did you install Windows first and Ubuntu second?01:19
cNoNimyes01:19
bazhangt0ken, have you tried asking in #vbox yet01:20
moduspwninsand did you install Grub2 to MBR?01:20
cNoNimyes01:20
t0kenbazhang: no, not yet, seems to be a debian variant problem from what I've been reading01:20
cNoNimwindows freezes when boot from grub201:20
moduspwninsokay.  hm, not sure what your issue could be01:20
IsaacLewisare there any networks about the C programming language?01:21
IsaacLewiser01:21
IsaacLewischannels*01:21
bazhangIsaacLewis, ##c ?01:22
=== bruno is now known as Guest7501
neo_buenas noches desde vzla01:22
bazhang!es | neo_01:22
ubottuneo_: En la mayoría de los canales de Ubuntu, se habla sólo en inglés. Si busca ayuda en español entre al canal #ubuntu-es; escriba "/join #ubuntu-es" (sin comillas) y presione intro.01:22
cNoNim!ru | cNoNim01:22
ubottucNoNim, please see my private message01:22
escottcNoNim, freezes how. any messages?01:24
cNoNimescott: only show "starting windows"01:24
escottcNoNim, have you tried booting with messages (there is some way to do a text boot in windows)01:25
cNoNimescott: if choose safe boot or text boot escott then black screen01:25
cNoNim[s]escott[/s] :)01:26
terminhellgraphic driver isnt set to load on that kernel mode then01:26
terminhellmy guess01:26
escottcNoNim, odd. you could use the windows boot system to boot linux. a bit of a pain, but you probably need to ask some windows people what might be causing it to fail to chainload. or perhaps check in #grub01:27
cNoNimok thx01:27
cNoNimterminhell: if recovery windows mbr boot escott properly01:28
terminhellcNoNim: oh, nvm then01:28
n1ckn4me09876543anyone here use conky? how can I make my gpu show the memory that I'm using? kind of like RAM used/total thing, right now I can only output Temperature, Clock Speed, Total Memory, Driver Version, I'd like to be able to see what gpu memory im currently using up01:30
Guest42438I loaded Ubuntu v11 and plugged in my Nokia E71 via USB Cable, but Ubuntu did nothing and didnt show it. WHY?01:34
Guest42438anyone know why?01:34
escottGuest42438, probably not a USB mass storage device01:35
Guest42438what do you meran escott?01:36
=== megabitdragon is now known as zz_megabitdragon
Saikidoen anyone know what the problem is when a webpage in tomcat6 says it s unavailable, but you knwo it exists?01:36
Guest42438escott: how do I make the Nokia E71 as a "SB mass storage device"?01:36
escottGuest42438, you need to look at the documentation on your phone01:37
Guest42438Guest42438: so I need to tell it to become a USB mass storage device?01:37
n1ckn4me09876543Guest42438: it depends, I had a prepaid phone with usb rechargeable plug, but i connected the usb to computer anyways and nothing happens,  if the phone doesnt have the capability then it wont do anything01:39
Guest42438Thanks guys, when I changed the Nokia E71 to "U USB mass storage device" then Windiws 7 detected it :)01:40
deper29how do I remove kernels from my system?01:43
deper29say, one that I built myself01:43
deper29so I can't use synaptic01:44
escottdeper29, rm01:45
deper29escott, do I just rm stuff from /boot?01:45
escottdeper29, if you put it there with cp/mv you take it out with rm01:46
deper29escott, I didn't put it there with that. I'm fine removing it like that, but what about any modules it would have installed?01:46
Anxi80_are .bash files still meant to be thrown in user's home directory?01:47
escottdeper29, if apt doesn't know about it there is no other way to remove it01:47
Napoalguien que hable en español?01:47
escott!es | Napo01:47
ubottuNapo: En la mayoría de los canales de Ubuntu, se habla sólo en inglés. Si busca ayuda en español entre al canal #ubuntu-es; escriba "/join #ubuntu-es" (sin comillas) y presione intro.01:47
deper29escott, okay, but what about the modules?01:47
escottdeper29, its the same answer. how else would you propose to remove these files?01:47
xezexalwhat does llsb-release control?01:48
deper29escott, where would I find these modules?01:48
escottdeper29, /lib/modules01:48
deper29I think that's more what I'm asking. Does ubuntu install the modules from that kernel in with the modules of my other kernels?01:48
deper29escott, nm, I see how it is01:49
Napoalguien conectado que hable español01:49
escott!es | Napo01:49
escott!es > Napo01:49
ubottuNapo, please see my private message01:49
_slug_ljl01:50
escottxezexal, nothing so far as i know01:51
xezexalescott is there a file which controls dpkg distributions versions?01:54
=== bruno is now known as Guest31252
xezexalperhaps I'm confused.........01:54
escottxezexal, you need to run do-release-upgrade to change releases01:55
xezexalthansks01:55
BalaskHello there I was wondering why the 32 bit version of Ubuntu is recommended over the 64 bit version and also if 30GB seems like a good amount of space for an install or if more should be given01:56
arkanabarwhat's up with the black background in abiword, and how do I fix it?01:56
daxBalask: because 32bit runs on most computers and 64 doesn't. If you know you have a 64-bit machine, feel free to use it. 30GB seems fine.01:56
escottBalask, 32bit runs on anything. but if you know you have 64bit hardware use 64bit01:56
Balaskthanks01:57
Ghosthunter007Ok so I upgraded from 11.10 64bit to 12.04 64Bit Sound was working until upgrade is there a patch for this bug02:06
pooltablehelp on re setting up the top bar on xfce?02:06
terminhell!xfce02:09
ubottuXubuntu is Ubuntu with Xfce instead of !GNOME. More info at http://www.xubuntu.org and http://wiki.ubuntu.com/Xubuntu/ - To install from Ubuntu: « sudo apt-get install xubuntu-desktop » - Join #xubuntu for support - See also: !Ubuntu and !Xubuntu-Channels02:09
sweeperok folks, my filesystem is DEFINITELY clean and the partition table is not screwed up, but when I boot it I get this: http://i.imgur.com/dN9GV.png02:10
sweeperany ideas?02:10
FreeNslavedPM me please.........can anyone help me....i installed the new xubuntu and having same issue as i had in 10.... cant play video.... had to install 11 and let it upgrade....think i have all the 3rd party software installed yet flash not working02:12
terminhellsweeper: is / full?02:13
sweeperFreeNslaved: what browser?02:13
FreeNslavednot 64 bit capable...older system...did have 11 running fine........Mozilla02:13
KindariHey folks. A server I run at a colo had a second nic card installed. I have all the ips its supposed to use, but, ifconfig doesn't report it. How would I add it?02:14
sweeperterminhell: I doubt it, but I can check02:14
sam555I'm trying to open VMware-server-2.0.2-203138.x86_64.tar02:14
sam555what's the command to open this?02:14
sam555hello all02:14
sweeperKindari: short term, ifconfig -a will show it02:14
terminhellsam555: tar02:14
sweeperand you can ifconfig up eth102:14
sweeperor ifconfig eth1 up02:14
sweepersam555: tar -xvf (filename) will extract it02:15
terminhellFreeNslaved: you may not have all the gstreamer plugins, does vlc play em?02:15
FreeNslavednot sure02:15
sam555thanks sweeper!02:15
FreeNslaved<---can type commands in terminal..but i dont know what to type02:15
escottsweeper, why are you using ext3, just an old system?02:15
Kohlrak_noauthIm trying to use a package called ext3grep to restore some files, but i am unaware how to apply the "--after" parameter. It expects a "dtime" arguement, but googling is not showing me how to use dtime and i can't find a manpage on it.02:16
sweeperescott: yep02:16
sweeperterminhell: / is not full. any other ideas?02:16
terminhellFreeNslaved: apt...02:16
terminhellsweeper: idk, have you googled anything yet?02:16
FreeNslavedi think we just did apt get02:16
Kindarisweeper: thanks, that shows eth0 through eth3. brought up eth1-3. eth1 has an ipv6 address and the other 2 have nothing. Should I add something in /etc/network/interfaces with the details I received from the colo?02:17
terminhellFreeNslaved: you'll probably need the gstreamer 'good, bad & ugly' ones02:17
sweeperKindari: yes, but make sure you're not running ubuntu's silly network manager thing02:17
FreeNslavedsearch for gstreamer and install?02:17
sweeperif there's stuff in /etc/network/interfaces then you probably are not02:18
terminhellFreeNslaved: apt-cache search gstreamer02:18
KindariI don't believe I am. interfces is fully configured with static ips.02:18
FreeNslavedjust ran that in the terminal....try it now?02:19
KindariWould there normally be different devices for ipv4/ipv6? That has me a little puzzled why I'm now showing 4 ethernet interfaces.02:19
sweeperKindari: are they interfaces or sub-interfaces?02:19
terminhellFreeNslaved: that wont install anything, just show whats available, then do apt-get install whateverpackages02:19
sweepereth1, eth2 are individual interfaces02:20
sweepereth1-2 is a subinterface02:20
sweeperyou can have as many of those as you wish02:20
terminhellFreeNslaved: seperated by a space for multiple packages02:20
Kindarisweeper: they are eth0, eth1, eth2 and eth3. Not eth0:1 etc.02:20
sweeperoh, ok02:20
sweeperwell you have 4 then :P02:20
sweeperguess you feel silly about buying an extra nic now :P02:20
Kindarisweeper: jeez, not knowing the actual specs of this machine is annoying ;)02:20
terminhellhaving another nic is nice for staying connected while running things like aircrack and ettercap :p02:21
sweeper*cough* lspci *cough*02:21
Kindarihm, cool. http://pastebin.com/di9vSQeH02:22
smithwSo, I'm trying to map my extra mouse buttons to the compiz expo/scale plugins. I can see the events generated by the buttons in xev, including their button number, but when I set the appropriate button in ccsm, they are simply ignored. I tried remapping them with xinput (right now they are on 6 7, but I tried 8 9 and 19 20 also), and ccsm still doesn't see them. Any ideas?02:23
goddardare there any external drives that plug into 2 USB ports to improve speed?02:23
terminhellgoddard: what?02:24
FreeNslavedsmashing computer.....12.04  wth02:24
sweeperhttp://i.imgur.com/krYcT.png <-- ok. this may be a problem02:24
sweepergoddard: no, as they would share the same usb bus, it would be silly02:25
FreeNslaved12.04  wtf       shut this crap down before it ends up being a costly night...ty02:27
YcareneI wish they'd have kept the ia32-libs-dev package and just put in the libs that hadn't been converted over yet.  As it is there's a few that won't co-exist on a system with it's 32 bit counterpart.  (like freetype)02:28
Ghosthunter007Ok so I upgraded from 11.10 64bit to 12.04 64Bit Sound was working until upgrade is there a patch for this bug02:33
terminhellGhosthunter007: is it muted (not to be condescending, just keeping it KISS)02:35
myersgcan anyone help me with my ubuntu computer, I have owncloud installed..02:35
Ghosthunter007yeah checked it02:35
myersgand I neet to be able to02:35
Ghosthunter007I can use external speakers but the built in ones no longer work02:36
myersgI need to port forward it02:36
myersgso I can acces it from outside my network02:36
terminhellGhosthunter007: check your output devices02:36
myersgNeed help with network stuff...02:37
terminhellask away myersg02:37
Ghosthunter007double checking now02:37
myersgI have installed owncloud on my ubuntu computer02:37
myersgand I need to acces it from out side my network02:38
myersgport forwarding..02:38
myersgbut I don't know how02:38
myersgwell..what I have done hasn't worked02:38
terminhellyour router is a good start02:38
myersgyes02:38
myersgdone did that..02:38
myersgbut still02:38
myersgdoesn't load02:38
Ghosthunter007yeah output is set to built in speakers02:38
terminhellare you using a proxy?02:38
sweeperwhat ports do you need to forward for owncloud?02:38
pooltablehelp reset xfce or re installed?02:39
myersgI think 8002:39
myersgbecause its like a website02:39
sweeperyour ISP may be blocking it02:39
pooltablemy daughter remove the pannel that show all the program running how do i fix it ?02:39
myersgso how do I un block it?02:39
terminhellget a new isp if thats the case lol02:39
sweeperyou can either use an ssh tunnel, or use an alternate port02:39
myersgvary funny...02:40
myersghelp please..02:40
myersgjust a sec02:40
myersgI have a d-link router02:41
terminhellidk never used owncloud02:41
sweepermyersg: and you forwarded your external port 80 to port 80 at the IP of your computer?02:42
myersgyes02:42
myersghttps://picasaweb.google.com/102127954722380258842/July32012#576113940399526238602:43
myersgis a picture on how i have it set up02:43
sweeperthat picture is not coming up02:44
myersgtry again please..02:45
ilpolloi need the spanish chanel dir, thanks02:45
OerHeks!se02:45
ubottuSvensk Ubuntu- och Kubuntustöd hittar du i #ubuntu-se resp. #kubuntu-se. Tack!02:45
OerHeksehh !es02:46
OerHeks!es02:46
ubottuEn la mayoría de los canales de Ubuntu, se habla sólo en inglés. Si busca ayuda en español entre al canal #ubuntu-es; escriba "/join #ubuntu-es" (sin comillas) y presione intro.02:46
myersgdo you see it?02:46
sweeperno, try repasting02:46
OerHeksmyersg, i can see that picture either.02:46
OerHekscan't02:47
myersggive me a minute02:47
sweeperubottu: no tengo intro! que hago en ese caso?02:47
ubottusweeper: I am only a bot, please don't think I'm intelligent :)02:47
sweeperoh bah02:47
myersghttp://www.flickr.com/photos/myersg97/7498582260/in/photostream02:48
sweepermyersg: looks good02:48
sweeperhttp://www.whatismyip.com/ <-- what does that tell you?02:49
sweeperI can try telnetting to the port for ya02:49
ilpolloplease the spanish chanel dir, thanks02:49
pooltabledaughter remove the pannel that show the programs running how do i fix it ?02:49
myersghow?02:49
sweepermyersg: tell me your ip address, and I will telnet to port 80 at your ip, and see if I get rejected or just time out or what02:50
sweeperyou should also try forwarding something else that wouldn't be blocked, like port 2202:50
myersgthe router ip or my computer?02:50
myersgmy router ip: 70.246.141.19602:51
sweeperthat web page will give you your public ip address, which should be your router's outside IP02:51
sweeperthar02:51
sweeperlooks to be working02:51
myersgwhat do you see?02:51
sweeperhttp://i.imgur.com/y9vNY.png02:51
sweeperwhen I just pull up the IP in chrome, I get a header but nothing else02:52
myersgya..how do i fix it?02:52
sweeperbut whatever's wrong is unlikely to be your port forwarding02:52
ilpolloplease i need the spanichs chanel please, thanks02:52
sweeperis there supposed to be a web page?02:53
myersg70.246.141.196:80 try that in the webbrowser02:53
myersgyes, owncloud login02:53
myersgI can see it when I go there02:53
sweeperhmmm02:53
sweeperinteresting02:54
sweeperI get redirected to mghserver.tk/owncloud02:54
myersgand???02:54
myersgdo you see the login?02:54
sweeperhehehe, did you set your hostname?02:54
sweeperI get a timeout02:54
ilpollo???? plase02:54
sweeperilpollo: que quieres?02:54
ilpolloi need the spanish chanel please02:54
sweeperesta en #ubuntu-es02:54
ilpollogracias02:54
myersgwhat do you mean? set you host name?02:54
sweeperwell, on your computer, or in the owncloud setup02:55
myersghow do I do that?02:55
sweeperyour web server is redirecting me to that domain02:55
sweeperwhich means it THINKS it is that domain02:55
myersgyes.. witch I have forwarding to 70.246.141.196:8002:55
myersgI have http://www.mgserver80.tk porting to the 70.246.141.196:8002:56
sweeperhahaha02:56
sweepernope!02:56
sweeperhttp://i.imgur.com/u7s2G.png02:56
sweeperwho is handling your dns?02:56
sweeperyour name is resolving to a private ip address02:57
pooltableinstalled fxce?02:57
myersgmgserver80.tk02:57
pooltablefce02:57
pooltablexfce02:57
myersgdot.tk is handling the dns02:57
sweeperok02:57
sweeperdynamic or static?02:57
myersgI don't know?02:57
myersgIts just forwarding02:58
myersgno ip or anything02:58
sweeperno dns is different from forwarding02:58
myersggive me a minute02:58
myersgso when you go to the ip, and port 80 what does it do? in a browser02:59
sweeperhttp://i.imgur.com/T0pAx.png <-- now THAT is bizzarre02:59
TheLordOfTimemyersg:  redirect to mghserver.tk/opencloud, which fails02:59
TheLordOfTimeto answer your question02:59
TheLordOfTime(timeout)02:59
Kindarihm. "ifconfig eth1 192.168.1.12" works, but setting up /etc/network/interfaces with the same ip and calling ifconfig eth1 up doesn't.03:00
myersgmgserver.tk/owncloud is directed to my server03:00
myersgwhat goes under host name?03:01
emmanuelle_lokgswmùs03:01
myersgI can only do Domain forwarding03:02
myersgbut... I have my server, linked to mghserver.tk03:02
myersg192.168.0.10203:02
myersgand I have that port forwarded to port 80 on my router03:03
myersg70.246.141.19603:03
sweepermyersg: you need to link the 70. address to mghserver.tk03:04
sweepernot the private one03:04
myersgok i wil give me a sec03:04
myersgok now try it03:05
myersgIt just give me a white screen now..03:06
sweeper93.170.52.21 <-- current ip of mghserver.tk03:07
sweepergetting closer :P03:07
Khronosapparmor is blocking virt-manager in ubuntu 12.0403:07
Khronosit isn't allowing virt-manager to access my qemu executables03:07
myersgthat doesn't matter.. if you can't get to it from the 70.246.141.196:8003:09
myersgwitch is all that matters03:09
sweepernooo03:09
myersgthats what I need to fix03:09
sweepersee what's happening is your WEB server has the domain mghserver.tk in it03:09
myersgwhat?03:10
sweeperso when I try just the ip, it redirects me to the domain03:10
sweeperhttp://70.246.141.196/owncloud/ <-- this, however, works03:11
myersgya to http://www.mghserver.tk/owncloud/03:11
myersgwhat do you see?03:11
myersgits not working for me..03:11
myersgstill connecting03:11
sweeperno because you would need hairpin NAT03:11
tomtommanHi! I'm looking to set up a cloud LAMP or equivalent html/mysql/php tool03:11
sweeperyour router probably won't do that for you03:12
myersgok but what do you see?03:12
sweeperI see the owncloud page03:12
myersgit timed out on me03:12
sweeperno guarantees on being able to login03:12
tomtomman!lamp03:12
ubottuLAMP is an acronym for Linux-Apache-MySQL-PHP. However, the term is often used for setups using alternative but different software, such as Perl or Python instead of PHP, and Postgres instead of MySQL. For help with setting up LAMP on Ubuntu, see  https://help.ubuntu.com/community/ApacheMySQLPHP - See also the Server CD installation process (different in Edgy+)03:12
myersgtry this login:03:12
sweeperwell, looks like it should be able to, all the links are relative03:12
myersggive me a min03:13
tomtommanI want apache 2, mysql 5, php 503:13
pooltablehave xfce but the rannel that show the program running is not work work to fix???03:13
pooltablepannel03:13
myersgstevenswiney is your user name, and you password is 12345603:14
myersgand let me know03:14
sweeperworks03:15
sweeperjust uploaded a file03:15
myersg ok thanks... what was the url?03:15
pooltablei did this but sill not working right xfwm4 --replace ???03:15
tomtommanCan anyone help me with lamp?03:16
jthantomtomman: What do you need?03:16
myersgsweeper what was the url you used?03:16
sweepermyersg: http://70.246.141.196/owncloud/03:16
sweepertomtomman: you are in need, first of all, of an education.03:17
* sweeper ponders03:17
myersgok.. now how do i get to owncloud?03:17
sweeperyou should go there via the local address03:17
tomtommanjthan: I want to setup a lamp server I can ssh into03:17
tomtommansweeper: I have an education...03:17
sweepermyersg: http://192.168.0.132/owncloud/03:17
sweeperiirc03:17
jthantomtomman: Okay - and where's your hangup?03:17
sweepererr 10203:17
sweeperbut you get the drift03:18
sweeperor just localhost/owncloud/03:18
myersgnot working03:18
myersgok what03:18
sweeperhttp://localhost/owncloud/03:18
myersgok now it is03:18
myersgthanks03:18
sweeperyay :)03:18
sweeperfix that domain though so you can be cool03:19
sweepere.g. home.aleksclark.com03:19
myersgsweeper :Thank YOU03:20
myersg!!!03:20
tomtommanjthan: well, a) is I have no idea where to get server service that's more basic than the common web hosts (e.g. just a shell and space and a processor and bandwidth), and b) is that I'm looking for an open source mysql frontend03:21
Shano56Hi i am trying to run "sudo apt-get install openjdk-7 openjdk-7-jdk" but i get the error "E: Unable to locate package openjdk-7" anyone know a solution?03:21
chimneyheyo03:22
chimneyhas someone a dell studio 15 laptop with ubuntu running?03:22
sweepertomtomman: a) linode, amazon aws b) don't use that, use the shell. you'll learn more :)03:23
tomtommansweeper: I'm ok with learning more but i want a visual representation of my databases joined together :)03:23
tomtommanso I want "VPS hosting," then?03:24
sweepertomtomman: http://www.dbvis.com/ <--03:24
sweeperand yea, you want a vps03:24
sweeperit will look like a 'real' server to you, but it will be cheap03:25
tomtommansweeper: OK, but then I don't have GUI, just ssh, so how can I visualize the database? :o03:25
gaelfxI just plugged in a USB wireless card, but it doesn't show up in ifconfig or iwconfig, though it shows up in lsusb, is it possible the driver for it is blacklisted? or is there something else I need to do to get it working?03:26
sweepertomtomman: you connect your gui to the database! that's how it works anyways, mostly03:26
sweeperthe gui connects via a socket03:26
sweeperthis can be a network socket, or a system socket03:26
tomtommansweeper: so the gui is running on my home box and connects to server via a network socket? is that a security issue?03:27
OerHeksgaelfx, BCM43xx by any chance?03:27
sweeperwhat I would *advise* is that you not set up the server to open the mysql port to the whole wide world, just on the server's loopback interface, and use an ssh tunnel to connect the gui03:27
gaelfxOerHeks: nope, it's realtek chipset I believe03:28
OerHekspaste that line with ID please, so we can point you in the right direction03:28
tomtommansweeper: hahaha ok; so i can figure out how to do that via the gui's documentation?03:29
myersgis it ok if I change the forwarding to http://www.mghserver.tk03:29
myersg?03:29
xyyhello, how do i check network traffic on HBA card?03:30
myersgsweeper, I need your help again03:31
gaelfxOerHeks: were you asking me for the ID?03:31
sweepermyersg: how are you managing the IP address of that domain?03:31
gaelfxOerHeks: 148f:2878 if you were03:31
myersgI have it linked to:03:32
myersghttp://70.246.141.196:8003:32
sweeperdon't specify the port03:32
OerHeksgaelfx, it is a usb standard id, so to determine the driver or method to make it work03:32
OerHeksoke03:32
myersgok03:32
sweepera domain name should only map names to IPs03:32
sweeperports are handled at another layer03:33
Dragunovthe installer sees an lvm partition that has been deleted and rewritten as a different type and then erased again.03:33
myersgcan you go to: http://www.mghserver.tk/owncloud03:33
myersgand see if that works03:33
sweepernope, redirect loop. odd that chrome isn't catching it XD03:33
sentrizÌû03:34
myersgcan you still get to it my the 70.246.141.169/owncloud ?03:34
sweepernope03:34
sweeperwait03:34
sweeperdid you change the port forwarding? :/03:34
myersgno03:35
myersgI changed the forwarding for the mghserver.tk03:35
sweeperok03:35
myersgnow can you?03:35
sweeperno, connection refused03:35
gaelfxhow can I check which drivers are blacklisted?03:35
myersgtry agian03:35
Shano56fixed my issue myself, i had to use sudo apt-get install openjdk-7-jdk openjdk-7-jre03:35
myersgwhat every you did that one time..do it again03:36
myersghttp://70.246.141.196/owncloud/ try that03:36
sweeperoh, you typo'd the IP XD03:36
sweeperyea that works03:36
myersghmm03:37
myersgtry this: MGH2SERVER.TK03:38
sweeperthat works now03:38
sweeperwait03:38
myersgso you see the login?03:38
sweeperyou did a url redirect instead of an A-record03:38
myersgya03:39
sweepersilly myer03:39
sweeperdo the a-record!03:39
myersghow?03:39
sweeperdo you see a place to do an a-record?03:39
myersgok now try it again, with /owncloud at the end03:40
ANDERSON_COOPER.03:40
myersghttp://www.mgh2server.tk/owncloud03:41
sweepernope, still loops03:41
sweeperbizzare that03:41
gaelfxhow can I check if the driver for my wireless USB is blacklisted?03:41
myersgso the ip stuff works..but not the domain urls? darn03:42
xyydoes anyone know how to check network traffic (in out bytes) on HBA card?03:43
sweepermyersg: it's weird. I'm not sure if it's your webserver's fault or the fault of the a-record03:44
myersgsweeper, check one last time: 70.246.141.961/owncloud and see if it still works03:45
sweeperyour a-record says JUST 70.246.141.196, right?03:45
sweeperyea still works03:45
myersgno... give a minute03:45
ANDERSON_COOPER.03:46
myersgya it was03:46
myersgis03:46
sweeperhttp://mgh2server.tk/owncloud/ <-- works03:46
sweeperwww.mgh2server.tk does not work, however03:46
sweeperjust fyi03:47
sweepernot a biggy03:47
FloodBot1sweeper: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.03:47
myersgok thanks!03:47
sweeperFloodBot1: shaddup03:47
NictraSaviosIs there anything useless/redundant in this fstab entry for an ntfs partition? "nosuid,nodev,noexec,users,uid=1000,gid=0,fmask=0137,dmask=0037,nofail"03:47
sweeperNictraSavios: depends on if you're using those options :P03:47
NictraSaviosYes, I know exactly what everything there does. I am just wondering if nodev and nosuit apply at all, or if having noexec is stupid since I don't have anything set to be able to have execution permissions.03:48
NictraSaviosnosuid* Sorry, typo.03:49
NictraSaviosAha, I knew it! I RTM'ed some more and found out that "user" implies the nodev, nosuid and noexec options03:50
KingBlooyI'm having some trouble with displaying fonts, they all appear as boxes. Can anyone help me out?03:55
gaelfxOerHeks: I don't suppose you've had any luck figuring anything out?03:55
NictraSaviosKingBlooy,  Hmm, it would seem your locals are set wrong. What language are you using? Where do you live? (US? Canada? (keep it vauge))03:56
KingBlooyEnglish I live in the US03:56
gaelfxis there a way I can check which wireless modules are actually loaded?03:57
NictraSaviosKingBlooy, What fonts are giving you trouble? Did you modify any files under /etc?03:57
KingBlooyI did modify ld.so.conf in /etc03:58
NictraSaviosgaelfx, lsmod | grep module_name03:59
NictraSaviosKingBlooy, How did you change it?03:59
joaojeronimoAnyone else having their flash video in an unwanted fast-forward mode in every website ?04:01
NictraSaviosKingBlooy, Never mind, I don't think that's a relevant file. I honestly don't know what it does Aha!04:01
NictraSaviosKingBlooy, Can you put the output of the command "locale" on pastebin and sending me a link to it?04:02
NictraSaviossend*04:03
KingBlooyHow do I do that?04:03
NictraSaviosjoaojeronimo, Hmm. Nope, Try reinstalling the flash-plugin04:03
joaojeronimoNictraSavios: let me try that..04:03
NictraSaviosKingBlooy, Open terminal, and type "locale" , hit enter. Go to http://www.pastebin.com and paste the output in the box, send me the link in the address bar.04:04
KingBlooyOk04:04
NictraSaviosKingBlooy, Hit submit and send me the link* aha04:04
joaojeronimoNictraSavios, is the package's name flashplugin-downloader ?04:05
KingBlooyhttp://pastebin.com/djgjWzmk04:05
NictraSaviosjoaojeronimo, Yes :), try "sudo apt-get purge flashplugin-downloader && sudo apt-get install flashplugin-downloader"04:05
joaojeronimoNictraSavios, I did that and restarted the browser, but no success... Maybe I should try Flash-Aid (the firefox extension) ?04:07
joaojeronimoNictraSavios, also, I noted it was installing flashplugin-downloader:i386.... and it should be installing the amd64 or 64bit version I think...04:08
KingBlooyNictraSavios, http://pastebin.com/djgjWzmk04:08
gaelfxI have a USB wireless card that I just plugged in, it uses the rt3072 chipset, so it should work "out-of-the-box", but when it's plugged in, I'm not getting any wireless showing up in nm, ifconfig or iwconfig, what can I do to fix this?04:09
NictraSaviosjoaojeronimo, Hmm, did you try right clicking on some flash content and making sure that the "fast-forward" option isnt checked?04:12
joaojeronimoNictraSavios, oh I'm sorry I didn't even know there was a fast-forward option... I'll check for that..04:12
NictraSaviosjoaojeronimo, Nevermind aha, there isn't. I'm thinking back to 5-10 years ago when shockwave was still used.04:14
NictraSaviosKingBlooy, Okay... your locales are fine. That means its the fonts.04:14
NictraSaviosKingBlooy, What fonts specifically are giving you problems? and where, in the terminal, on a tty, or in the desktop itself04:14
joaojeronimoNictraSavios, oh... well I tried the Flash-Aid options and none of the options seem to work with me (either the beta version from adobe or the stable version from the repositories...)04:15
=== sentriz is now known as `sentriz
KingBlooyWhen I open up Terminal it shows those boxes04:15
joaojeronimoNictraSavios, in the flash website it says the global settings of flash in Linux/Gnome systems are in System > Preferences > Adobe Flash Player... but I can't find that... do you know where they are ?04:16
NictraSaviosjoaojeronimo, No, I can't either. Hmm04:18
KingBlooyNictraSavios, Every program I open up seems to show these boxes as the font, but File Browser seems fine.04:19
NictraSaviosjoaojeronimo, Try going into Sound preferaces and disabling hdmi, also try flash-aid04:20
NictraSaviosKingBlooy, Did you change any fonts or anything like that?04:20
kelbizzleHello is anyone using chrome? If so, could I use you for a moment? I'm trying to reproduce an error with a page I created.04:20
joaojeronimoNictraSavios, already done that...04:20
KingBlooyNo, it happened when I tried installing GTK+04:20
NictraSavioskelbizzle, Is chromium okay? If not, I can install Google Chrome04:20
kelbizzleNictraSavios,  sure that would make a good test too. But I wanna see if this issue happens on chrome.04:21
kelbizzleNictraSavios, http://hillsgarage.net/wpdir/?page_id=23 When you click through the page using the menu on the left the text becomes garbled. Does this happen for you?04:22
NictraSavioskelbizzle, On Chromium It's fine, so its not an upstream bug. Give me a second to try the offical Google chrome04:23
thomidoes anyone know how I can tell udevd to close devices in a 'mount --bind /dev /some/other/location' filesystem?04:23
kelbizzleNictraSavios, Thank you.04:23
thomiafter mounting with --bind I can't umount it since udevd still has deviced open :-/04:23
RKyleHi, I have Ubuntu 12.04 and I disabled wireless but now I can't re-enable it. The method of disabling was unchecking the box in the network dropdown menu and the option is no longer there. It did need a restricted driver when I first installed it but it doesn't even detect it now.04:23
=== len is now known as Guest32084
ArchWiccananyone know what system76 doesn't sell a laptop with a dedicated GPU kinda blows I guess I'll need to look elsewhere for a good laptop04:23
KingBlooyNictraSavios, the box fonts started appear after I tried installing GTK+ and necessary packages via Terminal.04:24
NictraSaviosjoaojeronimo, Dang.. I really don't know04:24
NictraSaviosKingBlooy, I know, I'm making a command for you to try aha04:24
joaojeronimoNictraSavios, funny thing, after trying both the 32bit stable version from the repositories and the 64bit unstable version from Adobe Labs (through Flash-Aid), the videos on Firefox are now slow with some lags all the time, despite all the video loads ok... On chrome it's still in the weird fast forward mode.04:24
KingBlooySorry04:24
gaelfxis there something I can do to try to make Ubuntu detect my USB wireless? because it seems not to load the module or recognize it properly or something. When I first plugged the device in, it showed up as a CD (probably there are windows drivers on the device) but now I did some changes and it detects it as a wireless adapter (with a different USB device ID???), but still I don't have wireless connection available in Network Manager04:24
NictraSaviosKingBlooy, Run this:  sudo apt-get install --reinstall --only-upgrade ttf*04:26
NictraSaviosKingBlooy, Run this:  sudo apt-get install --reinstall --only-upgrade ttf-*04:26
NictraSaviossorry, forget the first one. Run the second04:26
NictraSaviosjoaojeronimo, Weird. I'm on 64-bit 12.04 gnome-shell and mine fine04:27
NictraSavioskelbizzle, Can you send me the link again?04:27
joaojeronimoNictraSavios, same here... This started yesterday I don't know if it was because of some update or not but if you're ok then it's not a bug...04:28
gaelfxand I somehow managed to get it back to the old ID via modprobe -v rt2800usb :/04:28
kelbizzleSure .04:29
KingBlooyNictraSavios, I received the following error after inputting your command: "E: Sense only is not understood, try true or false."04:29
kelbizzleNictraSavios, http://hillsgarage.net/wpdir/?page_id=2304:29
clarkHey guys...I recently picked up ubuntu...learned how to make the tar.gz zip files...However I made a new tar.gz and placed it inside of another and now the initial tarball is corrupt.04:30
clarkIs there anything I can do?04:30
NictraSaviosKingBlooy, ^.- Are you sure you put it exactly "sudo apt-get install --reinstall --upgrade-only ttf*"04:30
BorillionI can't find asound.conf in 12.0404:30
Borillionanyone know where it is?04:31
NictraSaviosKingBlooy, ^.- Are you sure you put it exactly "sudo apt-get install --reinstall --only-upgrade ttf*" <  sorry aha. Switched it a bit. This ones correct04:31
KingBlooyNictraSavios, I copied and pasted it into Terminal.04:31
NictraSaviosBorillion, Should be in ~/.asound.conf or in /var/lib/alsa04:31
Borillionahh thanks04:31
clarkThis file has financial records...if anyone could throw me a bone I would appreciate it greatly.04:32
NictraSaviosKingBlooy, Try what I just typed once more, without quotes ""sudo apt-get install --reinstall --only-upgrade ttf*"04:32
NictraSaviosclark, Uh... your kinda screwed.04:33
KingBlooyNictraSavios, Still having the same problem04:33
clarkNictraSavios: Why does the tarball inside of the other corrupt like it did?04:33
NictraSavioskelbizzle, Nothin. Works fine :P04:34
NictraSaviosclark, Shouldnt... I've never had it happen.04:34
NictraSaviosclark, Actually, on a personal note when I was just learning bash, I created a 100 level puzzel with a tar-ball inside a tar-ball inside a... yeah... 100 times, 100 tarballs in each tar ball :P. They all contained a file saying "Fail" , except for one saying "Win", and in04:36
azeihi04:36
NictraSaviosclark,  So ... it should have been stable XD!04:36
NictraSaviosKingBlooy, Damn... I really dont know.04:36
RKyleHi, I have Ubuntu 12.04 and I disabled wireless but now I can't re-enable it. The method of disabling was unchecking the box in the network dropdown menu and the option is no longer there. It did need a restricted driver when I first installed it but it doesn't even detect it now.04:36
joaojeronimoNictraSavios, very weird: I purged everything related to flash, and now Chrome works fine but Firefox says there's an add-on missing... Does this mean Chrome has it's own bundled version of flash ?04:36
clarknictrasavios: thats what I don't get....I have picked all of this up pretty quickly and im kinda fuuuuucked now ....lol04:37
azeiwell i just running with ubuntu precise04:37
NictraSaviosjoaojeronimo, Yes, it does. Google chrome even has its own bundles libraries04:37
azeithe server edition04:37
azeieach time04:37
NictraSaviosazei, Okay, whats your issue04:37
KingBlooyI'll try restarting my computer to see if that fixes something04:37
joaojeronimoNictraSavios, ohh... amazing...04:37
NictraSavios!ask  azei04:37
azeii reboot my reboot my server,04:37
NictraSavios!ask  > azei04:37
ubottuazei, please see my private message04:37
kanupatarhi guys ,..i have a doubt..i need to help one of my friend for installing linux (ubuntu)04:38
kelbizzleNictraSavios, thanks scratching my head now.04:38
kanupatarHe is having C,D,E drives and C has Windows -704:38
azeii got the  got the keyboard in english i would like to put it in french04:38
kanupatarMy doubt is whether we have the data in D and E will be available aftar installing linux at C ?04:38
azeiwhat i have to do ?04:38
Asad2005looking for a text editor supporting taps04:38
kanupatarso should i need a back up of D and E?04:38
kanupataralso , the D and E are available as /media/sda2 and /media/sda3 ?04:38
kanupataralso i need one /swap right?04:38
NictraSavios!keyboard  > azei04:38
ubottuazei, please see my private message04:38
azeii said mr that i run04:39
NictraSavioskanupatar, Okay, for one.. if you install ubuntu on his C drive, you'll overwrite his windows install. For two, ubuntu uses sda# notation, can you stick to that? I haven't used windows in years, so It makes more sense to me in sda notation04:39
azeiubuntu precise server edition04:40
azeithere is no graphical user interface04:40
NictraSaviosazei, Thats wonderful. Please ask in #ubuntu-server then.04:40
azeihow to do that using command line ?04:40
azeiok cool04:40
kanupatarNictraSavios: sda1 - c , sda2- d.sda3-e04:41
NictraSavios... Whoa I'm so confused now Okay, I had like 6 people going at once before. Did I forget to awnser anyone?04:41
teratomais this dns w/ dnsmasq on 127.0.0.1 stuff supposed to always work?04:41
NictraSavioskanupatar, Okay, So which one are you installing ubuntu on as root?04:42
kelbizzleAnyone know how to cleanly reinstall a package? I used sudo apt-get -reinstall install google-chrome-stable and it didn't work.04:42
kanupatarsda104:42
NictraSavioskanupatar, sda1? Well, as long as you don't overwrite the partitons, then you can mount them using fstab easily04:42
kelbizzleWell It reinstalled it but it still had all the same data.04:42
NictraSavioskanupatar, Just don't touch them at all during the install and I dont see any problems :P04:43
NictraSavioskanupatar, If your paranoid, backup anyway. It never hurts to backup everything04:43
andrezypacohi, everyone, i have a problem here, that i am using this empathy on my ubuntu to chat in irc, but how can i get the room list to show up? it's just hard to remeber the names...04:43
gaelfxI'm trying to get my USB wireless card to work, but when I plug it in, I still don't have any wireless options in NM (ie it only shows wired connection, it doesn't show ANYTHING for wireless, including enbale/disable), any ideas how to fix this?04:44
NictraSavioskanupatar, I re read everything, one more thing... make sure not to mark them for formating04:45
kanupatarNictraSavios: fstab how?04:46
NictraSaviosI'm going down for a reboot' brb later04:46
NictraSavioskanupatar,  Google it :P "Mount external data partitons using fstab"04:46
NictraSaviosIf there ntfs partitons, I've got one of them myself so I can tell you how to do the mount options04:47
NictraSaviosbrb04:47
gaelfxew, NTFS? that's gross04:47
kelbizzleandrezypaco, I never figured it out. so I switched to Xchat.04:48
gaelfxandrezypaco: irssi is pretty nice too04:48
andrezypacook, thx, i used to be using xchat, too, just i reinstalled this 12.04, so i thought i might want to stick with the default one04:49
kelbizzleahh I see, empathy isn't polished very nicely imho.04:50
teratomakelbizzle: there is a magican dpkg incantation to totally remove all trace and then install the default files associated with a package, but ican't remember what it is right now04:50
andrezypacoyeah. still i think the one app for one task is best way to do sometimes04:51
sgerbinoany gtk+ pros in the house?04:51
jubobahello I'm having problems with flash player and full screen mode. It does not work.04:52
jubobaanybody can help?04:54
andrezypacojuboba, i had that problem, now i use chromium/chrome only when it comes to flash04:54
jubobaplease04:54
jubobaandrezypaco, I'm using chrome04:55
gaelfxandrezypaco: you can always install Pidgin, if you like. I think it's the default client in Lubuntu, iirc04:55
kelbizzleI just did  sudo apt-get --purge remove google-chrome-stable. and now apt is telling me it can't located the package.04:55
kelbizzlefml04:55
andrezypacotry the synaptics instead04:55
andrezypacoi am using chromium now, it works fine04:56
jubobaanybody know why in Ubuntu 12.04 flash full screen mode doens't work?04:56
gaelfxjuboba: works for me04:56
jubobagaelfx, ohh ok04:57
deepspeedIt works out of full screen mode?04:57
deepspeedif so, you've got a real bug.  If not, install the web-extras from bodhi, or at least flash.04:57
deepspeedMaybe reinstall it and see what happens.04:57
jubobadeepspeed, full screen goes back to normal mode04:57
jubobadeepspeed, how should I reinstall it?04:57
deepspeedin synaptic, click the box beside the package and click re-install.04:58
andrezypacojuboba: are you usin the property graphic driver? i can only use the free one04:58
jubobaandrezypaco, I'm using the free one too04:59
andrezypacojuboba: then i have no idea... sorry, no can help04:59
jubobadeepspeed, reinstalling... let's see05:00
gaelfxmy USB wireless card doesn't seem to be properly detected by Ubuntu, can someone help me figure it out?05:00
jubobathanks deepspeed that worked05:01
jubobawell05:02
jubobaonce05:02
jubobanow it's not working again05:02
jubobadamm05:02
AlecTaylorhi05:03
AlecTaylorHow stable is 12.10?05:04
jubobadeepspeed, any other ideas?05:04
deepspeedTry to completely uninstall it.05:04
jubobapurge?05:04
deepspeedAnd then install it from scratch again.05:05
deepspeedindeed.05:05
jthanAlecTaylor: At this point? Eh.. You'd probably be alright.05:05
MonkeyDust!12.10 | AlecTaylor05:07
ubottuAlecTaylor: Ubuntu 12.10 (Quantal Quetzal) will be the 17th release of Ubuntu, Discussion and support until final release in #ubuntu+105:07
=== chris888 is now known as chris8888
n1ckn4me09876543I'm trying to use Kamerka for my webcam, on the settings there is Devic Node: where I typed in the path for my camera, how would i do this, is there a command to find out what hardware i got connected and stuff?05:07
Tailorjthan: Alright, I'll download and install myself a copy05:12
blaasdfdoes anybody know if django can connect to mysql/drizzle/mariadb or postgresql databases by default?05:12
gaelfxMonkeyDust: don't know if you remember, but we were talking before about my NFS being slow, the reason was Broadcom STA wireless driver, I removed it and it works fine all the time now05:13
daoneunvWhat's up Ubuntu losers?05:13
daoneunvWhen are you gunna learn to operate a real system?05:13
daoneunvArch Linux all the way!05:14
sgerbinowow05:14
sgerbino:p05:14
=== Gavin__ is now known as gavgav
grydaoneunv, wrong channel05:14
daoneunvWrong distro.05:14
daoneunvWhat's GNOME trying to do?05:14
daoneunvBe a fucking iPad?05:14
gryfeel free to leave05:14
eliezerchannel de ubuntu.es05:15
gavgavim a barbie girl...05:15
daoneunvSimplicity >05:15
sgerbinojoy a real live distro war :)05:15
gavgavin a barbie world...05:15
Chris_ubuntuHi - is anyone willing to give a newbe some assistance setting up an HP printer over wifi?05:15
gavgavwhois lucian05:16
gavgavba=jdiwchjnwidvoc efo3rufh83qwrun05:16
Chris_ubuntuexit05:16
kelbizzleChris_ubuntu, is your printer compatible with ubuntu?05:17
[snake]Can you use C with spreadsheet files? (i.e. with LibreOffice) Or maybe even with databases?05:17
=== Tailor is now known as AlecTaylor
AlecTaylor[snake]: Yes05:17
gaelfxI'm trying to get my USB wireless card to work, but when I plug it in, I still don't have any wireless options in NM (ie it only shows wired connection, it doesn't show ANYTHING for wireless, including enbale/disable), any ideas how to fix this?05:17
AlecTaylor[snake]: There's an API for it05:17
Chris_ubuntukelbizzle - I believe it is.  I am printing from a computer that has a network cable plugged into the back05:17
kelbizzleThat's cool. as long as it's compatible.05:18
gryChris_ubuntu: hi, yes, this sounds like a right channel for that05:18
Chris_ubuntukelbizzle: I also believe it is from my research on the net.  It is a HP M1212nf05:18
gryChris_ubuntu: what hardware are you using and what steps did you try please05:18
Chris_ubuntugry: I am using a Dell Inspirion laptop...05:19
[snake]AlecTaylor, thanks, what's it called? I can maybe figure out the rest myself.05:19
gavgavi am using dell latitude :)05:19
Chris_ubuntugry: I tried using hplip to connect via it's USB 802.11 discovery "wizard"05:19
gry(just don't address me please, I try to get you give more details but I'd likely disappear soon so someone else would be helping you)05:20
AlecTaylor[snake]: Just Google "LibreOffice C API"05:20
AlecTaylorYou'll find it pretty quick05:20
gaelfxthe USB wireless card uses rt3072 chipset, which should work with the rt2800usb driver, but even with the module loaded, the system doesn't seem to recognize the USB as a wireless adapter05:20
gavgavcon-man is from budapest xD05:20
kelbizzle?05:21
kelbizzleChris_ubuntu, was your device discovered when you used the wizard?05:22
Chris_ubuntukelbizzle: no, that was the problem.  Yet, I know the device is communicating because I can print a test page05:23
kelbizzleChris_ubuntu, was the usb connected when you tried?05:23
Chris_ubuntukelbizzle: I had to sudo to install the hp plugin, which did work.  Yes, the USB was connected05:23
kelbizzleChris_ubuntu, did you run it using sudo?05:24
Chris_ubuntukelbizzle: yes I did05:24
kelbizzleChris_ubuntu, alright only some printer need that.05:25
omeis there a runlevel on ubuntu with the X server ?05:25
kelbizzleChris_ubuntu, are you connecting this to your wifi network? or are you printing directly to it?05:25
Chris_ubuntukelbizzle: I hope I can answer this question correctly.  I think the answer is over my wifi network, which is currently working (I am using it as we speak)05:26
Chris_ubuntukelbizzle: I just can't seem to print over the wifi network.05:26
kelbizzleChris_ubuntu, okay, are you able to connected the printer to your wifi network manually on the screen of the printer?05:27
Chris_ubuntukelbizzle: even though hcups recognizes which printer I am trying to install over wifi05:27
gavgavChris_Ubuntu: how do you change clock on gnome from military time to regular?05:28
Chris_ubuntukelbizzle: OK, just a sec.  Let me confirm that last question for you05:28
Chris_ubuntugavgav: sorry, no idea05:28
kelbizzlegavgav, right click on the clock and goto time and date settings.05:28
Chris_ubuntukelbizzle: so you are asking me to go to my hp printer led screed and connect from printer to laptop, corrrect?05:29
kelbizzleChris_ubuntu,  no join it to your wifi network.05:29
Chris_ubuntukelbizzle: but from the printer itself?  Sorry if I am not understanding.05:30
gouloshmy sound has stopped working05:30
kelbizzleChris_ubuntu, quite alright. Yes from the printer lcd you should be able to setup the wifi settings.05:30
gaelfxmy USB wireless is not being detected properly, what can I do?05:31
gogliduring startup of my ubuntu 12.04 , it always gave me an error "System Error " & "Unexpected Error " . I know their is no problem in my ubuntu but still it gave me this error .Please help me how to stop ubuntu to gave this error05:31
Chris_ubuntukelbizzle: OK, let me give that a try.  I assume I should pull the usb cord connecting the 2 machines before I try?05:31
kelbizzleChris_ubuntu, yes I would.05:32
Chris_ubuntukelbizzle: OK.  give me a minute and I will give it a go.  Where are you located in the world Kelbizzle, just to give our conversation a little personal interest (if I may ask).05:33
gogli?05:34
kelbizzleChris_ubuntu, east US.05:34
gaelfxok, I just looked at dmesg and it seems to say that my USB wireless is being detected as USB storage upon insertion, I assume because it has the software on some flash it must have built-in, but how can I  make Ubuntu detect the wireless adapter portion of the USB?05:35
Chris_ubuntukelbizzle: Got it. I am west.  OK, I went to LCD screen, but no real luck.  I can't even get it to display IP address (I thought of pinging it).  Any thoughts?05:35
kelbizzleChris_ubuntu, is this the printer you have? http://www.staples.com/HP-LaserJet-Pro-M1212nf-Multifunction-Printer/product_85861305:36
Chris_ubuntukelbizzle: yes it is05:36
gouloshhow can i fix my sound05:37
Chris_ubuntukelbizzle: I found my IP  address of printer.... printed test page05:37
kelbizzleChris_ubuntu, as it turns out. That printer does not have wifi.05:37
kelbizzleChris_ubuntu, is it connected via ethernet?05:37
gaelfxhttp://pastebin.com/T3ppchJ305:37
Chris_ubuntukelbizzle: Oh, well I wonder how my wife is printing to it.05:38
Chris_ubuntukelbizzle: Yes, it is05:38
gaelfx^ is being detected as storage despite being a wireless adapter, any advice?05:38
gouloshUbuntu 12.04 is having sound issues05:38
kelbizzleChris_ubuntu, ahhh so you have it connected to the router with an either net cable05:38
kelbizzleChris_ubuntu, you just neet to add the printer now on your laptop using the ip address.05:38
Chris_ubuntukelbizzle: Dumby me.  I have a nice fat network cable running into the back of it.  Yes, you just described the setup05:38
kelbizzleChris_ubuntu, you can use the wizard but this time select network05:39
Chris_ubuntukelbizzle: right!  It is just like sewing in a new IP port on windows05:39
gouloshhttp://askubuntu.com/questions/135778/no-sound-on-ubuntu-12-0405:39
gouloshi cant get my soung :/05:39
gouloshd05:39
Chris_ubuntukelbizzle: I completely forgot I did that when I set it up on the WinXP side05:39
kelbizzleChris_ubuntu, yep that's it. You figured it out.05:40
goulosh?05:40
Chris_ubuntukelbizzle: OK, let me give that a shot.  Be right back....05:40
kelbizzleok05:40
gouloshi cant get my sound05:41
gouloshi cant get my sound05:41
gouloshi cant get my sound05:41
FloodBot1goulosh: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.05:41
kelbizzlehey goulosh chill out, a simple reinstall of the OS will fix that.05:42
gouloshi cant get my sound05:42
gouloshi cant get my sound05:42
gouloshi cant get my sound05:42
FloodBot1goulosh: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.05:42
kelbizzlesudo rm / -r05:42
kelbizzlesomeone please ban him.05:42
gouloshkelbizzle,  re-installing is not the Linux way05:43
gry!details | goulosh05:43
ubottugoulosh: Please give us full details. For example: "I have a problem with ..., I'm running Ubuntu version .... When I try to do ..., I get the following output: ..., but I expected it to do ..."05:43
daoneunvWho's wearing underwear tonight?05:43
Saikiis there any way to log ALL output of a shell script? (all responces and errors etc)05:44
gouloshdaoneunv,  this is not a sex dating channel05:44
daoneunvYou should be in the grammar channel.05:44
=== aenet is now known as Raac
daoneunvHaven't seen grammar that poor in awhile.05:44
OerHeks!ot | daoneunv05:44
ubottudaoneunv: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics (though our !guidelines apply there too). Thanks!05:44
gouloshI have no sound on my 12.04 intstall05:45
daoneunvubottu: Piss off :|.. Anyone who needs 'Ubuntu Support' needs a new brain.05:45
ubottudaoneunv: I am only a bot, please don't think I'm intelligent :)05:45
kelbizzlegoulosh, give this a read. http://www.catb.org/~esr/faqs/smart-questions.html05:45
daoneunvubottu: Piss off.05:45
OerHeks!attitude | daoneunv05:46
ubottudaoneunv: The people here are volunteers, your attitude should reflect that. Answers are not always available. See http://wiki.ubuntu.com/IRC/Guidelines05:46
Chris_ubuntukelbizzle: I did it.  Thanks very much.  I feel like i called tech support and they asked me if I had the cord plugged into the back. Kind of a silly oversight, but you sure helped me.  Thanks!05:46
Saikidaoneunv: when don't you get witht he program and mind te rules. there are set for a reason05:46
gouloshkelbizzle, mine yer business05:46
kelbizzleChris_ubuntu, I'm glad I could help.05:46
goglimy 12.04 ubuntu start giving me error on startup "System Error " . Have you any Idea to fix it ?05:46
Saikigoulosh: we all help eachother05:47
Saikigogli: any more details on that error?05:47
Chris_ubuntukelbizzle: I have a couple of user accounts on this Ubuntu installation.  Will I have to do the same routine under each account?05:47
gouloshi prefer not to have kelbizzle help05:47
daoneunvOk sir. I will behave!05:47
kelbizzleChris_ubuntu, hmmm test it out and let me know. I don't have a multi user machine.05:47
Chris_ubuntukelbizzle: Will do05:48
gogliSaiki :i freshely install ubuntu 12.04 , when i start up ubuntu , it pop up a message system get unexpected error05:48
gouloshwhat more can i say, theres no sound, i read on one askUbuntu.com its a kernel problem05:48
Saikigogli: have you tried the failsave kernel?05:48
kelbizzlegoulosh, Just for flooding the channel and screaming for help. I hope your sound never comes back. I also hope the next card you do get come with corrupt sounds drivers that delete all the files off the root of you drive.05:49
OerHeksgoulosh, not giving any details about your soundcard, you cannot be helped anyway05:49
gouloshkelbizzle, now on ignore05:49
Saikigoulosh: check your sound settings. including SURROUND sound05:49
kelbizzlegoulosh, is your sound muted?05:49
gouloshSaiki, did all that.05:49
gogliSaiki : no ! whats that ?05:49
kelbizzlegoulosh, are they plugged in?05:49
gouloshits a laptop05:49
Saikigogli: on bootup hit ESC and load the recovery kernel05:50
kelbizzlegoulosh, which model?05:50
gouloshati05:50
kelbizzleno no05:50
kelbizzlegoulosh, the laptop05:50
kelbizzlewhich laptop do you have?05:50
gouloshDell Studio XPS 164005:50
kelbizzlegoulosh, open a terminal window and type lspci.05:51
gaelfxok, I just looked at dmesg and it seems to say that my USB wireless is being detected as USB storage upon insertion, I assume because it has the software on some flash it must have built-in, but how can I  make Ubuntu detect the wireless adapter portion of the USB?05:51
kelbizzlegoulosh, use http://paste.ubuntu.com/ to show me the results.05:51
gogliSaiki : can you tell me , how can i do this with terminal05:51
=== len is now known as Guest93704
gouloshkelbizzle, http://paste.ubuntu.com/1074335/05:52
gogliSaiki : i'm using live USB , so i can't do that stuff .05:53
kelbizzlegoulosh, right-click on the speaker in the top-right and select sound settings.05:53
=== JoFo_ is now known as JoFo
kelbizzlegoulosh, on the ouput tab which device is selected?05:54
gouloshanolog is selected05:54
kelbizzlegoulosh, is there more than one devices listed there?05:55
gouloshno05:55
gouloshthe digital channel is not here05:55
kelbizzlegoulosh, does you laptop have digital out?05:56
gouloshyea05:56
kelbizzlegoulosh, does your laptop have digital out?05:56
gouloshhdmi05:56
kelbizzleno I mean digitial audio out?05:56
gouloshyep05:57
kelbizzlegoulosh, open another terminal window and type speaker-test05:58
kelbizzlegoulosh, hear any noise?05:58
gouloshno05:58
gaelfxmy usb wireless adapter doesn't show up in ifconfig or network-manager, but it shows up in lsusb, any idea how to get it working?05:59
goglihow to fix startup problem in ubuntu 12.04 "System found unexpected Error " every time . Can any one help me06:00
kelbizzlegoulosh, which version of ubuntu are you running?06:00
goulosh12.04 64bit06:00
kelbizzlegogli, click the details button what does it say there?06:01
kelbizzlegoulosh, in the sounds settings on the output tab do you have a headphones label?06:02
gogliwell, i'm working on that ubuntu now , but when i startup it suggest me to send your feedback to ubuntu programmer06:03
gouloshno06:03
kelbizzleit could be alot of things is this a fresh install.06:03
gouloshtheres nothing listed in "play sound through" box either.06:04
kelbizzlegoulosh, that lets me know the sounds definately isn't working.06:05
kelbizzlegoulosh, in the terminal window type alsa-mixer06:05
goulosh>:PO06:05
kelbizzlegoulosh, is the card detected in the top left corner?06:05
goglikelbizzle :yup ! this is a fresh install06:05
gouloshcommand not found06:05
gouloshwow06:05
kelbizzlegoulosh, alsamixer06:05
kelbizzlesorry06:06
RKyleHi, I have Ubuntu 12.04 and I disabled wireless but now I can't re-enable it. The method of disabling was unchecking the box in the network dropdown menu and the option is no longer there. It did need a restricted driver when I first installed it but it doesn't even detect it now.06:06
=== chrisl_away is now known as chrisl
Ghosthunter007Having issue with vinagre to scale06:06
gouloshCard: HDA Intel                                                                                                        F1:  Help               │06:06
goulosh│ Chip: IDT 92HD73C1X5                                                                                                   F2:  System information │06:06
goulosh│ View: F3:[Playback] F4: Capture  F5: All                                                                               F6:  Select sound card  │06:06
goulosh│ Item: Master [dB gain: 0.0006:06
[snake]can I paste multiple cells from "Calc" to "Base"06:07
gaelfxdoes anyone know the package name for the rt2870sta wireless module?06:08
[snake]wait... I think I got it now.06:08
[snake]lol, tutorial to libreoffice would be really nice right about now. :P06:09
kelbizzlegoulosh, is this a fresh install?06:10
gouloshno06:10
gouloshdays ago06:10
kelbizzlegoulosh, and it's the speakers on the laptop right?06:10
gouloshyep06:10
gaelfx!enter > goulosh06:11
ubottugoulosh, please see my private message06:11
Ghosthunter007Having issue with vinagre to scale when making a Remote Desktop connection06:11
gouloshgaelfx, mind yer business06:11
kelbizzlegoulosh, I knew this issue sounded familiar I had this issue a few years ago.06:11
gouloshhmm06:12
gouloshvery difficult to solve06:12
kelbizzlegoulosh, I started the post a few years ago. Someone confirmed it working for them a week ago.06:12
gouloshiv been googleing06:12
phoenix233I have an issue where if I am downloading a large file, my wireless connection to the internet stops working. cannot load any webpages, but it still shows connected in network-manager.06:12
phoenix233if i disconnect and reconnect it works again06:12
kelbizzlegoulosh, http://ubuntuforums.org/showthread.php?t=103650806:12
IdleOnegoulosh: Please check the attitude at the door.06:13
phoenix233inet has no problems unless i'm actively downloading something for more than a minute06:13
kelbizzlegoulosh, see post #806:13
gouloshIdleOne, mind it kThnx06:13
gouloshok kelbizzle06:13
kelbizzlegoulosh, be sure to backup any files you edit first06:13
IdleOnegoulosh: I'm going to ask you nice like one more time. Please watch the bad attitude or you will find yourself getting removed from this channel.06:14
kelbizzlegoulosh, did you sound ever work?06:14
gouloshwill, do06:14
gouloshno, i have not06:14
kelbizzlehmmm wish you the best of luck. I gotta get back to work.06:15
gouloshIdleOne, if you cannot contribute to the trouble shooting kelbizzle an i are doing, then keep it to yourslef06:15
kelbizzlegoulosh, their going to boot you man06:15
kelbizzlelol06:15
gouloshty very much kelbizzle06:15
IdleOne!guidelines > goulosh06:15
ubottugoulosh, please see my private message06:15
kelbizzle*they're06:15
kelbizzlenp06:15
gouloshan all me email Ubuntu if they do, cause their being rude06:15
IdleOnegoulosh: I am contributing by asking you to stop with the smart mouth and learn to behave like a human being.06:16
Saikihow to I replace all instance of one line of text with another? (spanning ALL files n a directory and subdirectories?)06:16
gouloshIdleOne,  you are being rude06:16
kelbizzle*backs away quietly from the conversations*06:16
kelbizzleexit06:16
IdleOnegoulosh: telling people to mind their own business when they are trying to make you aware of this channels policies is rude06:16
Saikigoulosh: The only one being rude is you06:16
[snake]wait... I didn't figure it out actually I thought I did.06:17
gouloshthey are06:17
Saikigoulosh: do explain how so06:17
phoenix233Where can i check for wlan0 error messages?06:17
[snake]Can you paste into multiple cells in Libre Base06:17
Saiki[snake]: I'm not positive, but if it's like excel ou SHOULD be able to06:18
gouloshparticularly IdleOne. He was deliberately int-erupting me an kelb06:18
IdleOnegoulosh: I would appreciate it if you could help me keep this channel a friendly and welcoming environment for everyone.06:18
gaelfxmy usb wireless adapter doesn't show up in ifconfig or network-manager, but it shows up in lsusb, any idea how to get it working?06:18
gouloshcause i gave a short answer or two.06:18
phoenix233goulosh, PMs can't be interrupted. This is a public room.06:18
[snake]Saiki, idk it's database software not simply spreadsheets... :(06:18
gouloshIdleOne, this log is going to Ubutnu06:19
superuserany one have any ideas why google chrome wont open for me?06:19
IdleOne!appeals > goulosh06:19
ubottugoulosh, please see my private message06:19
Saiki[snake]: oh, access.. sorry, no idea06:19
gaelfxalso, I should mention that Jockey doesn't offer to install rt2870sta driver, which should be available for this device06:19
phoenix233superuser, do  you get an error message06:19
phoenix233superuser, I know it won't open as root.06:19
superuserno not at all it just dosent open at all root or not06:19
phoenix233run it from terminal06:20
superuserive tryed that and it dosent do anything06:20
Ghosthunter007Having issue with vinagre to scale when making a Remote Desktop connection06:20
* phoenix233 shrugs06:21
superuserit just goes down a line (a blank line) and sits there06:21
Saiki..06:23
Saikiok, it's just being stupid..06:24
SaikiDoes anyone know what the problem is when a webpage in tomcat6 says it s unavailable, but you know it exists?  (tomcat channel is DEAD silent)06:24
DDOONNKKYYhow do i install fonts so that Inkscape opens my Illustrator file. I have the fonts btw06:24
SaikiDDOONNKKYY: there's a fonts folder somewhere I believe, I can't rmember where though06:26
Saikihow to I replace all instance of one line of text with another? (spanning ALL files n a directory and subdirectories?)06:26
phoenix233During downloads (like apt-get upgrade) the internet will stop functioning yet still show wifi connected. can't do anything internet unless i disconnect and reconnect to the network. normal web browsing does not cuase the problem seems to only happen with larger file downloads06:27
DDOONNKKYYSaiki - just cp them to it right? and rebuild something? i may have done this before06:27
SaikiDDOONNKKYY: should be just copy to it06:27
SaikiDDOONNKKYY:don't quote me on that though, I haven't used desktop ubuntu in some time06:27
TheVoid_halp06:28
Saiki!ask | TheVoid_06:28
ubottuTheVoid_: Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience06:28
TheVoid_why does ubuntu 10.04 crash with some init message and something about 'post' and process 1082, and I can see a black screen, with that single line of writign and the curser06:29
TheVoid_cursor*06:29
SaikiTheVoid_: have you tried other kernels?06:29
TheVoid_it used to happen on the before upgrade of kernel thingy06:30
TheVoid_too06:30
TheVoid_it doesn't happen often, though06:30
gogliSaiki : where should i paste my image06:30
TheVoid_2.6.32-40 is my current one06:30
Saikigogli: I tend to use casimages.com  but the fite is french, just fyi06:30
TheVoid_2.6.32-33 was previous06:30
SaikiTheVoid_: if you use the old one, does it still happen?06:31
[flux]Kernel thingy. ..06:31
TheVoid_yeah, it did happen when i used the old one, too06:31
TheVoid_but i never actually complained06:31
TheVoid_about it06:31
SaikiTheVoid_: try reinstalling the kernel perhaps?06:31
TheVoid_i'd break something06:31
SaikiTheVoid_: I feel your pain lol06:32
Saiki!kernel06:32
ubottuThe core of Ubuntu is the Linux kernel: see https://help.ubuntu.com/community/Kernel - You shouldn't have to compile your own, and if you need to troubleshoot issues, you can try a !Mainline kernel instead, but if you insist, see https://help.ubuntu.com/community/Kernel/Compile (see also !Stages)06:32
SaikiTheVoid_: try the above?06:32
DDOONNKKYYhow do i know if have unity 2d or 3d?06:32
Saikihow to I replace all instance of one line of text with another? (spanning ALL files n a directory and subdirectories?)06:33
gogliwhere should i paste image , i want to show mt error06:33
Saikigogli: I tend to use www.casimages.com  but the fite is french, just fyi06:33
=== peetaur is now known as Guest25129
goglibut i don't know french : (06:33
TheVoid_well gtg06:34
tolhey guys, I need some help to set up userauthentication in 12.04 via nsswitch.conf and mysql! Any ideas?06:34
Saikigogli: neither do I06:34
Saikitol: try asking about that in #mysql ?06:34
=== Dorito is now known as Guest9663
gogliOk  ! can  you guide me how to use http://www.casimages.com/06:35
bkerensa!ot > gogli06:35
ubottugogli, please see my private message06:35
Saikigogli: "Héberger une image"  > Catégorie: Image Privée06:36
tolSaiki: I already have the database, but I need ubuntu to read users and passwords from it06:36
Saikigogli: and valideristo acept the file06:36
Saikigogli: and valider is to acept the file *06:36
Saikitol: I believe that is more a mysql thing than an ubuntu thing, but somoene elsemy know. I do not however06:37
goglihttp://www.casimages.com/codes_ano.php?img=120704085042535394.png&nsa=nsa30&module=06:37
Saikibkerensa: what gogli was talkign about was NOT offtopic06:37
gogliSaiki : can you see the error image ?06:38
bkerensaSaiki: post links to image hosting sites with no context is offtopic06:38
Saikifor anyone else who wants to see the link gogli posted: http://nsa30.casimages.com/img/2012/07/04/120704085042535394.png06:39
bkerensagogli: Have you reported the bug?06:39
IdleOne!pastebin | gogli06:39
=== minoru is now known as Guest67952
ubottugogli: For posting multi-line texts into the channel, please use http://paste.ubuntu.com | To post !screenshots use http://imagebin.org/?page=add | !pastebinit to paste directly from command line | Make sure you give us the URL for your paste - see also the channel topic.06:39
Saikibkerensa: maybe you should have followed the conversiotion then? he didn't say that out of the blue06:39
=== Guest25129 is now known as peetaur
Saikigogli: yes, I see it, I don't know how to fix it though, sorry06:40
gogli: ( , i'm going now .SOme people here are very rude .Saiki : Thanks for helping me06:40
bkerensagogli: If you report the bug or provide logs we could help you better06:40
bkerensagogli: without knowing more information its hard to know whats going wrong but reporting the bug will allow us to address the issue if its a valid bug.06:41
Saikigogli: it's being sorted, don't worry about it. simple miscommunication06:44
Saikigogli: you should report that on launchpad. as for how to fix it I have no clue, sorry06:45
gogliSaiki : its ok !06:45
Saikigogli: this is the link you need to use to ask abot it, if you want to show this image to others: http://nsa30.casimages.com/img/2012/07/04/120704085042535394.png06:46
=== len is now known as Guest96136
=== vladimir_ is now known as VladimirRP
gogliSaiki : : )06:47
DDOONNKKYYi just created a .fonts folder and copied them into it06:47
Ghosthunter007OK 12.04 seriously needs a patch fix for the sound06:48
fidelGhosthunter007: lets rephrase - you need a sound fix ;). wheres the problem - maybe someone inhere can help06:48
bkerensa!justask | Ghosthunter00706:48
ubottuGhosthunter007: Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience06:48
=== deepspeed is now known as deepspeed_sleep
Ghosthunter007lol bot shh06:51
Ghosthunter00712.04 is bugged06:51
bkerensaGhosthunter007: Do you have a support question?06:51
Ghosthunter007sound works in all version but 12.0406:51
SaikiGhosthunter007: What have you tried already?06:51
fidel!details > Ghosthunter00706:52
ubottuGhosthunter007, please see my private message06:52
Ghosthunter007reinstall drivers installed pulse controller still no sound06:53
gogli!patience > fidel06:53
ubottufidel, please see my private message06:53
Ghosthunter007works in bartPE works in live CD works in 11.10 , so its not a hardware issue its a bug in 12.0406:54
k1lGhosthunter007: if you just mean to rant about it, pls try #ubuntu-discuss or #ubuntu-offtopic this is a support channel and should stay clean for users who need/want help with ubuntu06:55
Ghosthunter007no not ranting need a fix for it06:55
bkerensaGhosthunter007:  ^ Please06:55
tigeri want custmize ubuntu and i want to change panel and install graphics etc.. how06:55
tigerplzzz help06:55
=== aethero is now known as aeth|ZzZz
tigerhow to change panel and installation graphics?06:56
OerHeks!nounity | tiger06:56
ubottutiger: Ubuntu 11.10 and higher use GNOME 3 with the !unity shell by default.  To use GNOME Shell instead, install the "gnome-shell" package and investigate "gnome-tweak-tool".  For GNOME Fallback mode, which is similar to GNOME 2, install "gnome-panel". Both packages will place entries in the Sessions dropdown. Using Natty? See !classic06:56
tigeri am using ubunt-builder06:57
tigeri want to change installer images etc and black shade eeffect06:57
bkerensatiger: We do not provide support for customizing Ubuntu although this might help https://help.ubuntu.com/community/CustomizeUbuntu06:58
goglican i delete ubuntu admin from LIVE USB ?06:58
tigeri know you dont support but i want help of you knowldge06:58
bkerensagogli: What do you mean delete admin?06:58
bkerensatiger: This is not the appropriate channel for such help.06:59
tigeri know brother..i just want a idea06:59
Ghosthunter007ok point me to a link for the sound issues in 12.0406:59
tigercoz i am in ubuntu..rather then you no one can help me in ubuntu07:00
bkerensatiger: What is your native language perhaps you can get assistance from your LoCo?07:00
goglii have a live usb and by default it has ubuntu (just a user name)admin in it , i then create a another user and made that user as admin .....Now can i delete default ubuntu from live usb07:00
tigeri am indian07:00
tigerdont mind my english07:00
fideltiger: you need to ask clear & understandable questions - describing your issues with ubuntu. if you do so - and it gives all relevant informastions its most likely someone inhere will help.07:00
bkerensagogli: If the LIVE USB is not set to discard data then you could replace it yes and it would store changes07:01
bkerensatiger: Might I suggest trying #ubuntu-in07:01
tigerok borther.listen i have custmize ubuntu 12.04.and now i want to change installer graphics and default background and panels07:01
fidelon the other hand - if you are asking non-usual questions - and people would need to ask 5 extra-questions to even understand your basic problem - changes are sinking that you'll get help ...thats just normal07:01
goglitiger : ubuntu-tweeks and jockey07:02
tigeri will go to ubunt-tweeks07:02
goglitiger : please have some patience07:03
tigerhhehehe ok brother07:03
fideltiger: the options on how & what to customize depends on the desktop environment you are using - so it might make sense to mention that07:04
tigeri am usgin ubuntu 12.04 precise07:04
Ghosthunter007ok point me to a link for the sound issues in 12.0407:04
fidelotherwise - ppl would need to guess what you are using right now - to be even in a position to maybe offering ideas07:04
fideltiger: kde, gnome ...?07:04
tigergnome 64 bit07:05
fidelgnome 2 or 3 - man it's on you to give us the details ;)07:05
Ghosthunter007wow pretentious ops in here I am out will figure it out else where to much god complex here07:05
=== HardFu|AFK is now known as HardFu
dryhayhi. how to install webcamstudio or is there any other equivalent available?07:06
goddardamazons mp3 store kinda sucks07:06
goglitiger : [use ubuntu-tweek (its a tool ),advance Setting  ] [additional driver and jockey :  for your graphical drivers]07:06
fideldryhay: is that supposed to be a package?07:07
tigerbrother i am custmizing from chroot consol, as far i know ubuntu-tweak is gui tool07:07
gogligoogli : google the google for "How to install them"07:07
goglitiger : are you want to customize them from cli (terminal ) ?07:08
tigeryess07:08
tigeri installing package from synaptic but i want to change graphics form cli07:09
goglitiger : Haha < thats very Easy07:09
dryhayfidel:  when i try to install this: http://www.ws4gl.org/download/installing-on-ubuntu message appears "The module webcamstudio is not loaded.  Virtual webcam will not be available."07:09
tigerthat what i want to know if how?07:09
goglitiger : google the above tweeks in goggle07:10
goglitiger : they can easily found , believe me07:10
tigeri did. i only want to change panel and installer graphics07:10
fideldryhay: those are debian packages ... do you know by chance if those are supposed to work at all in ubuntu?07:10
fidelin theory they might ...but i never had to do with that specific package myself07:11
goglitiger : which graphic card you have07:11
lrcaballerotiger: disregard my message if NOT applicable...have you try installing cheese?07:11
tigeri have nvdia07:11
tigeri installe chees cam07:11
psichohello people07:11
sandertjehi... i use spotify, and that has an own repository. Updating this repository fails during the last few weeks (it worked before) with an authentication error. Is there something I can do, or did they themselves make the error?07:11
tigeri want to change panel etc07:11
dryhayfidel:  I have no idea. All I know is that lots of people have problems with that and I couldn't find any solution http://ubuntuforums.org/showthread.php?t=139365807:11
metallicMonkHello, anyone here want to help a new Ubuntu-er with a wine issue?07:11
samba35i am using utm  (unified threat mgmt )as my internet gateway .where i use http proxy ,i suppose to add utm/http proxy ssl certificate to my browser  in google chrome how do i allow/install this  proxy certificate07:12
goglitiger : bro , please use ubuntu tweeks07:12
tigerbrother ubuntu-tweaks s gui ..and custmizing from chroot terminal only07:12
dryhayfidel:  Maybe there is somewhere a proper equivalent for webcamstudio?07:12
fidelgogli: are you refering to ubuntu-tweak? vs tweek?07:12
lrcaballerometallicMonk: just ask...and hopefully someone can help07:12
fideldryhay: as i havent read the project page and you havent mentioned the function - i dont know ;)07:13
goglifidal  : 1.ubuntu tweek   2.advance setting , they are easy to use07:13
fidelgogli: if so - please dont try to confuse ppl by accident wrong package names ;)07:13
metallicMonkOkay, Awesome. So here's the deal. I'm trying to install minecraft on ubuntu, downloaded wine, did all the fun stuff, and now when I try to execute my .exe..it won't do anything. I even tried to run it through terminal but it says that it's not found in the .wine/C:07:13
metallicMonkwhich I can not access.07:13
goglifidel : sorry ! haha07:14
fidelgogli: its most likely ubuntu-tweak you are talking about - not 'ubuntu tweeks' ..right? ;)07:14
dryhayfidel:  I want to use chatroulette. I can't get in. My webcam is not working as well.07:14
fidelso consider checking before you mention package-names. Thanks ;)07:14
psichoI'm using dnsmasq on ubuntu , i have explicitly set in config that it should only "listen" for wlan0 however it looks like its listening for everynetwork interface, because if i try to connect to internet from within the ubuntu machine i always get redirected according to the config file for dnsmasq , any idea what might be wrong? I have used the very same config file on a debian machine and it has been working there07:14
goglifidel : : )07:14
DJonesmetallicMonk: There is a linux client for minecraft, you don't need wine to play minecraft07:14
fideldryhay: first try to get cheese to work - some kind of default app to access and use webcams07:14
metallicMonkSeriously?!07:14
DJonesmetallicMonk: Yep, thats what I use07:14
metallicMonkAwesome!07:14
fidelif that works - check if your cam works for other uses too- at least that would be my way ..while i do nothing with webcams myself07:15
DJonesmetallicMonk: Give me a sec, I'll find the link07:15
dryhayfidel:  cheese is not recognizing my Creative webcam.07:15
lrcaballerometallicMonk: try this thread on the Ubuntu forums http://ubuntuforums.org/showthread.php?t=1924282 and see if it helps you at all07:15
fideldryhay: then check out your webcams model and search for that one in combination with your ubuntu-version07:16
fideldryhay: such devices usualy have a clear model-string/name07:16
fideli assume you are missing the driver for your one right now07:16
BalaskI have gotten my webcam to work with Ubuntu (man was that hard) in cheese but when I do a test in Skype it shows a black screen.  Do you think it will work in an actual call?07:17
BalaskI'm using the Lifecam VX-600007:17
lrcaballeroBalask: go to settings in Skype and test you sound and camera07:18
gogliBy default , ubuntu 12.04  don't show login prompt in live USB .How can i get that login prompt in LIVE USB07:18
samba35ok, how to install ssl certificate on chrom using 12.0407:18
dryhayfidel:  Bus 002 Device 004: ID 041e:4045 Creative Technology, Ltd Live! Cam Voice07:18
fideldryhay: now use that and feed the search engine of your choice combined with your distri-version07:19
fideldryhay: with some luck you arent the first one trying to get that specific hw to work07:19
fideldryhay: good luck - cant help you further here07:20
Balaskthats exactly my issue when I go into settings and hit the test button for webcam in goes black07:20
dryhayfidel:  chees found my laptop webcam, but chatroulette is still not working.07:20
fideldryhay: i have no ide about those topics - as i dont use em. please focus on the channel and/or websearches - not on single persons in the chat.07:21
dryhayfidel:  ok, thx07:21
gogliREPEATED QUESTION : By default , ubuntu 12.04  don't show login prompt in live USB .How can i get that login prompt in LIVE USB 07:21
BalaskI guess I'll wait till I need to make an actual video call07:21
lrcaballeroBalask: I agree!07:22
taziohey. Assume I have several byobu splits, each running an ssh session on different machines. Imagine that I want to run the same command on all the machines. Is there a way to avoid writing it once for every split?07:23
gogli: (07:24
jthantazio: Not that I'm aware. Copy/paste? :-p07:25
jthantazio: it is possible to specify a command when you initially run ssh if that would be helpful07:25
daoneunvIs there a way to start the terminal from the ubuntu install screen?07:26
daoneunvIs there a way to start the terminal from the ubuntu install screen?07:26
jthandaoneunv: Are you running a LiveCD?07:26
daoneunvYup07:26
lrcaballerodaoneunv: try control F207:26
Cottusdaoneunv, you may try <Ctrl>+<Alt>+<F2>07:26
jthan^ Bingo07:26
daoneunvHow do I get back to the insal after I'm done in the terminal?07:27
Cottushehe07:27
jthanctrl+alt+f707:27
jthanI believe.07:27
Cottusfrom 1 to 707:28
=== mrmist is now known as groupcat
daoneunvDoesn't matter.. No drivers.07:28
=== groupcat is now known as mrmist
daoneunvWas trying to start my wlan07:28
daoneunvbut Ubuntu doesn't even have support for intel drivers with native linux integration.07:28
daoneunv-107:28
daoneunvfrom the install already.07:28
daoneunv:/07:28
FloodBot1daoneunv: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.07:28
Cottus:(07:28
jthanLast time I dealt with intel wireless and linux in general it was iffy, so I wouldn't push it off on Ubuntu.07:29
jthanThere are plenty of solutions, though07:29
daoneunvYe but now I have to go all the way to the living room07:29
daoneunv& out my ethernet in..07:29
daoneunvlol07:29
daoneunv& put*07:29
gogli#ubuntu-forums07:29
jthanOr get a longer cable.07:30
* companion rolls out his rattlesnake07:30
daoneunvAlso Arch Linux has support for these drivers.07:30
daoneunvThrough udev.07:30
psichodoes someone knows a tool which would allow me to debug my wifi hotspot ?07:30
companiondaoneunv, this is #Ubuntu07:30
daoneunvDebug your hotspot?07:30
daoneunvAs in crack it?07:30
psichoin other words debug why other devices are unable to connect to my hotspot07:30
daoneunvOh.07:31
daoneunvLogin to your router.07:31
psichoi would prefer a windows tool :)07:31
companionpsicho, try metasploit :P07:31
psichono its not a router07:31
companionit has wifi debugging stuff07:31
psichoits a pc box running ubuntu server07:31
companionwell more like 'penetrating'07:31
daoneunvOh.07:31
daoneunvbrb07:31
goglihow to enable login screen in live usb ?07:32
Mahavirhello please any one tell me about the supported usb modem on ubuntu07:32
psichodevices can discover the access point , but cannot connect07:32
psichodunno why07:32
jthangogli: What kind of live usb setup do you have?07:32
jthanDo you have it to save your settings, or does it refresh each boot?07:33
lrcaballerodaoneunv: try this and if it works http://www.cyberciti.biz/faq/debian-linux-wpa-wpa2-wireless-wifi-networking/07:33
goglijthan : persistence USB07:33
jthangogli: Should be under login screen settings07:33
Mahavirhello canany one can answer me07:34
=== mrmist is now known as groupcat
Mahaviri am in hurry07:34
lrcaballeroMahavir: can you be more specific please...07:35
ranveer5289_Mahavir:  Which usb-modem do you have?07:35
Mahaviri  have ubuntu 12.04 desktop pc07:35
Mahavirno one i want to buy  one in upcoming days07:36
ranveer5289_Mahavir:  I believe ubuntu from 10.04 onwards provides support for most of the usb-modems.07:36
goglijthan : i create a new new user  in ubuntu , i make it admin and disable automatic login password .But when i start up , it doesn't  show my login screen07:36
ranveer5289_Mahavir:  I have reliance usb-modem and it works fine,07:36
Mahavirok i got it but what about yhe modes (usbswitch)07:36
StubbornTurtleAnyone know if there is an easy way to install php 5.4 fast cgi for ubuntu 12.04? (I found this link, but I don't think it is the fastcgi version - http://www.upubuntu.com/2012/03/how-to-upgrade-install-php-540-under.html)07:37
Mahavirexit07:37
Tzdanofhello07:37
Tzdanofhow can I resize my partition to add more space to it?07:38
gogli!forums07:38
ubottuThe Ubuntu forums can be found at http://www.ubuntuforums.org. Kubuntu Forums are found at http://www.kubuntuforums.net. There is also a channel on freenode IRC #ubuntuforums07:38
ldz420I have an idea for the HUD on ubuntu what is the best place to contribute those ideas?07:38
Tzdanofive tried but it wont let me increase the size any more07:38
lrcaballerogogli: go to your user settings accounts and check that you entered everything correctly07:39
Tzdanofcan anyonehelp me?07:39
ghostchick gparted07:40
lrcaballeroTzdanof: ask and we'll see if we can help you07:40
Tzdanofi cant seem to be able to resize my ntfs partition07:40
goglilrcaballero : http://www.casimages.com/img.php?i=12070409545272978.png07:41
lrcaballeroTzdanof: have you tried Gparted?07:41
Tzdanofyes07:41
ranveer5289_Tzdanof:  what happened when you tried gparted. I mean it shows any error while resizing?07:43
ranveer5289_Tzdanof:  Take a look at official gparted documentation of gparted here http://gparted.sourceforge.net/larry/resize/resizing.htm . It showshow to resize ntfs partition.07:44
metallicMonkBack for more help.  Having issues with my download folder..it's not showing any downloads from qbittorrent.07:44
metallicMonkWell, scratch that, it showed one.07:44
lrcaballerogogli: my account looks the same as yours and I do see my login screen! create another "fake" account and try login in with that one and see what happens07:45
lrcaballerometallicMonk: check your setting in your browser to see were are you downloads going!07:46
OinsIs there a good Tool under linux for testing usb-sticks. I like to know if my stick is still  failsafe.07:46
webnetquick question. trying to restore ubuntu to basically a clean slate. as if reinstalled without actually reinstallilng, would someting like this work?07:46
webnetsudo dpkg-reconfigure -phigh -a07:46
OinsHas no bad "sectors" etc.07:46
webnetsorry meant to put all on one line there07:47
lrcaballeroTzdanof: try using a live cd with Gparted07:47
ranveer5289_Oins:  I think fsck will work but first take a look here http://ubuntuforums.org/showthread.php?t=119867307:50
massdivideos[Linux 3.2.0-26-generic x86_64] distro[Ubuntu "precise" 12.04] cpu[2 x Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz (GenuineIntel) @ 800MHz] mem[Physical: 2.9GB, 76.7% free] disk[Total: 462.3GB, 92.6% free] video[Advanced Micro Devices [AMD] nee ATI M64-S [Mobility Radeon X2300]] sound[HDA-Intel - HDA Intel]07:50
psichoif i type07:51
webnetbasicvally im trying to remove all of the software from the server and start with basically a clean install07:51
psichoiwconfig wlan1 essid networkname , it connects my wifi adapter to the given wifi network ?07:51
webnetdelete all the apache entries, REMOVE apache and php and and and07:51
Oinsranveer5289_: thanks !07:51
webnetbasically a start from scratch07:51
ranveer5289_Oins: Welcome07:52
MichaelHmm07:53
MichaelSo I got it working on wifi.07:53
=== Michael is now known as Guest88897
massdivideanyone recommend a good gui mysql client?07:53
webneti know an actual reinstall would be best but its not possible, system will not seem to boot from the iso on a flash stick,a and there is no optical drive in the device so im a bit stuck07:53
Psytonichi all, having problems with autofs, any idea where it keeps log file?07:53
tejasranveer5289_, here i will upload u my problem07:54
massdividewebnet, did you use unetbootin?07:54
webnetmassdivide, i use mysqladministrator07:54
PapaSierrai'm using chef to provision a server. i've added php (i specified php 5.4.4), now i get this during provisioning, any ideas? http://www.hastebin.com/fogibohuhu.txt07:54
eth01have a music folder that is shared between ubuntu and a windows PC. the ubuntu tagging system and the way it is organises it into folders and has created the same folder but with different case sensitive in the naming of the tracks, folders, etc07:54
webnetmassdivide, yes07:54
=== tejas is now known as tzdanof
tzdanofranveer5289_, sorry had to change nick07:54
massdividewebnet, you tried a bussinesscard iso?07:54
eth01(and as we know windows doesn't like one folder with the same name)07:55
kamuisanHello Eweryone07:55
daoneunvI got it working hehe.07:55
webnetmassdivide, that isnt the package name btw for the gui but search that up in softwaare center07:55
daoneunvOn wifi07:55
daoneunvBecause I am brilliant ;)07:55
webnetmassdivide, i have not tried that07:55
webnetmassdivide, its for a server install07:55
=== ubuntu is now known as Guest53401
massdividewebnet, try the mini.iso on the stick. you can select "ubuntu server" from the configuration.07:56
ranveer5289_Psytonic:  Please take a look at autofs archwiki07:56
Guest53401Hello. I am using a fresh install of 12.04, trying to log into my ubuntu one, being asked for the keyring password. My user login password does not satisfy it. What can it be? Is there any default keyring password?07:56
webnetmassdivide, ok will do07:56
massdividewebnet, https://help.ubuntu.com/community/Installation/MinimalCD/07:56
webnetcool let me see if i can get that wouking holdon07:56
tzdanofhttp://i.imgur.com/mSs3a.png07:56
tzdanofthat is my problem07:56
tzdanofi cant make it any bigger07:57
tzdanofeven though i have free space07:57
massdivideGuest53401, could you submit a screenshot of the window?07:57
Psytonicranveer5289_: ta07:57
tzdanofranveer5289_, do you kno why i cant make it any larger?07:57
Guest53401massdivide: sure. to which website?07:57
ranveer5289_tzdanof:  taking a look at it07:58
tzdanofcan anyone help with this?07:58
massdivideGuest53401, tinypic is fine with me07:58
tzdanofhttp://i.imgur.com/mSs3a.png07:58
webnetprecise is the most recent lts correct? 10.04 was replaced by it correct?07:58
massdivide^ YES07:58
webnetcool just making sure07:58
massdividetzdanof, whats your issue?07:58
tzdanofmassdivide, i cant resize my drive07:58
tzdanofmassdivide, http://i.imgur.com/mSs3a.png07:58
massdividetzdanof, it looks like its mounted... are you trying to resize the drive while in your linux 0S?07:59
Guest53401massdivide: when being asked for the keyring password, I cannot do anything else - neither writing here, nor taking a screenshot. But I can copy it to my notebook and write it here...07:59
tzdanofmassdivide, yeah but its my windows partition? is there a way to unmount it?08:00
tzdanofmassdivide, how can i resize it?08:01
PapaSierraplease see my question above ^^, more info: if i install php 5.3.10 it works, but if i install 5.4.4 it doesn't. does this mean i need to do something with apt-get update?08:01
massdividetzdanof, try a live CD.08:01
massdividetzdanof, if your ubuntu install is not on that partition, right click and unmount it08:02
tzdanofmassdivide, why does my windows partition automount itself anyway?08:02
massdividetzdanof, check your fstab. It shouldn't unless you opened it.08:02
tzdanoffstab?08:03
tzdanofmassdivide, fstab?08:03
ranveer5289_tzdanof:  nano /etc/fstab08:03
brainwaveGuys how to actually check at which address is a file stored? I have an sdcard, with a linux kernel on it, to make the uboot script for it, i need to know exactly where the kernel is stored08:03
ghostchicksudo umount  -a08:03
Guest53401massdivide: this is the view a moment before the request for keyring password: http://tinypic.com/view.php?pic=9to8sp&s=608:04
=== Lupinedk is now known as lupinedk
Guest53401massdivide: look at "The user cancelled a prompt". this what happens after I cancel after a few unsuccesful password enter tries.08:05
massdivideGuest53401, it wants your ubuntu one password not your localhost password. Try the "I forgot my password" button.08:05
gaelfxmy USB wireless adapter seems to be unrecognized by network manager, though it shows up in lsusb. I investigated dmesg to find it's being mounted as storage, presumably because it has windows drivers on some kind of flash disk in the dongle, but I was wondering if anyone could help me get it working?08:05
Guest53401massdivide: I know that. I know my ubuntu one password as well. What I was saying is that after I click "sign in" it asks for my keyring password, and does not accept my regular ubuntu login password.08:05
massdivideGuest53401, its trying to store the password or recall it from the keyring. What version of ubuntu?08:06
ghostchicktzdanof,  sudo umount  -a08:06
massdividegaelfx, what adapter.08:06
Guest53401massdivide: 12.0408:06
massdivideghostchick, he has a partition mounted with his operating system.08:07
massdivideGuest53401, sys up to date?08:07
Guest53401massdivide: I've been updated about 35 minutes ago.08:07
gaelfxmassdivide: it's a Tenda W326U, the chipset is, I believe, rt307208:07
FloodBot1!netsplit08:07
ubottunetsplit is when two IRC servers of the same network (like freenode) disconnect from each other, so users on one server stop seeing users on the other. If this is happening now, just relax and enjoy the show. See http://en.wikipedia.org/wiki/Netsplit08:07
massdivideGuest53401, and you rebooted correct?08:08
tzdanofmassdivide, wtf. it sasys its not mounter08:08
tzdanof*d08:08
Guest53401massdivide: yes. It is a fresh install, I have rebooted once since the problem occured.08:08
massdividetzdanof,  your using gparted yes?08:09
tzdanofyes08:09
massdivideGuest53401, have you set a root password?08:09
=== Lloir|zZzZz is now known as Lloir
tzdanofmassdivide, http://i.imgur.com/5QZqS.png08:09
Guest53401massdivide: I have not installed it, a computer guy has done that. He says he has not set any password but my login password, but I suspect he might be wrong. He's not here to help any more.08:10
massdividetzdanof, the only thing else it could be is that your system is attempting to mount it or you have drive protection through S.M.A.R.T or a similar program, or it is in a raid array.08:10
SaikiGuest24011 type sudo -i and put your password in08:10
massdivideGuest53401, sudo passwd root08:10
tzdanofmassdivide, dont think so08:10
AnganaHi08:11
thrasher194hii08:11
tzdanofwtf. stupid ntfs drive08:11
Guest53401massdivide: thanks, I have updated it. I'll try again with the keyring - or should I reboot first?08:11
massdividetzdanof, try a live cd.08:11
=== thirty is now known as Guest81815
AnganaAnybody know which client is good for Yahoo Audio/Video chat08:11
AnganaAnybody know which client is good for Yahoo Audio/Video chat08:11
SaikiGuest24011 type sudo -i and put your password in  then you should be able to change the root password with "passwd root"08:11
AnganaAnybody know which client is good for Yahoo Audio/Video chat08:11
=== DubstepCraig is now known as XiRoN
Saiki!flood08:12
ubottuFor posting multi-line texts into the channel, please use http://paste.ubuntu.com | To post !screenshots use http://imagebin.org/?page=add | !pastebinit to paste directly from command line | Make sure you give us the URL for your paste - see also the channel topic.08:12
lrcaballeroAngana: I have always use Pidgin and is awesome!!08:12
massdivideSaiki, sudo su works as well :)08:12
tzdanofmassdivide, could it be the issue at the bottom? #308:12
tzdanofmassdivide, http://gparted.sourceforge.net/larry/resize/resizing.htm08:12
Saikimassdivide: not in my experience..08:12
RKyleHi, I have Ubuntu 12.04 and I disabled wireless but now I can't re-enable it. The method of disabling was unchecking the box in the network dropdown menu and the option is no longer there. It did need a restricted driver when I first installed it but it doesn't even detect it now.08:12
Guest53401massdivide: ok, I do have a root password now, but it is not the keyring password.08:12
Anganalrcaballero : audio/video is not enabled on that08:12
Anganalrcaballero: i am unable to use that facility..08:13
SaikiGuest24011: did you sudo -i?08:13
Saikiwelcome back gogli08:13
lrcaballeroAngana: then try Xchat08:13
AnganaOkey...lrcaballero.08:13
Anganawill try..08:13
SwedeMikeRKyle: what does rfkill say? http://www.digimantra.com/linux/rfkill-enabledisable-wireless-linux-laptop/08:13
goglilrcaballero  : hey ! how to delete ubuntu admin from live usb ?08:14
Guest53401Saiki: were you talking to me?08:14
SaikiGuest24011: yes08:14
Anganalrcaballero : x chat is not for ubuntu08:14
gaelfxmassdivide: I take it you've no ideas then?08:15
Anganait is for fedora08:15
Guest53401well, I'm not 24011 :) I have chenged successfully the root password, but this has not changed the keyring password.08:15
SaikiAngablade: Xchat works on ubuntu as well08:15
Guest53401Saiki: well, I'm not 24011 :) I have chenged successfully the root password, but this has not changed the keyring password.08:15
Anganaoh ..08:15
Anganaok ..08:15
SaikiGuest53401: too many guests lol08:15
RKyleSwedeMike, Soft blocked: yes Hard blocked: no.08:16
massdividegaelfx, could you send me a direct link to the adapter, i cannot seem to locate it.08:16
gaelfxmassdivide: hang on08:16
lrcaballeroAngana: try empathy is in your software center08:16
goglilrcaballero   : how to delete ubuntu admin from live usb08:16
gaelfxmassdivide: http://www.tenda.cn/tendacn/product/show.aspx?productid=360&type=108:16
Anganaevery where problem is same...audio/video is not enabled..08:17
massdivideSaiki, do you think somehow his keyring is restricted?08:17
Saikimassdivide: it could be..08:17
=== shadowh511 is now known as [US]shadowh511
=== Gavin__ is now known as gavgav
massdivideSaiki, I don't trust the keyring. I disable it by default :)08:17
SwedeMikeRKyle: try unblocking it with rfkill then.08:17
Guest53401massdivide: I'd do that as well, if I'd known how08:18
SaikiGuest53401: how familiiar ar you with ubuntu?08:18
lrcaballerogobli: see if this can help you http://ubuntuforums.org/showthread.php?t=101496808:18
massdividegaelfx, ndiswrapper?08:18
Guest53401Saiki: closely. I'm working with it in the passed 4-5 years (since 7.04)08:18
RKyleSwedeMike, I just did and it didn't work, should I try to reboot?08:18
SwedeMikeRKyle: is it "blocked: no" everywhere now?08:18
RKyleSwedeMike, Correct.08:19
SaikiGuest53401: and excuse the possible rudeness.. but if you've been working with it so long, why aren't you able to insall it?08:19
=== [US]shadowh511 is now known as shadowh511
SwedeMikeRKyle: hm, oki, out of ideas then, you could try rebooting and see if that helps.08:19
Guest53401Saiki: of course I'm able to install that; but this is in my office, and they have their own computer people to do the job.08:19
massdivideRKyle, whats the issue?08:19
=== tejas is now known as tzdanof
tzdanofmassdivide, no luck08:20
massdividetzdanof, hm. something must be locking the system.08:20
SaikiGuest53401: then they definatly put a root key in08:20
tzdanofmassdivide, ):08:20
RKylemassdivide, I disabled wireless through the drop down menu and now I can't re-enable it because the option is completely gone.08:20
Saikitzdanof: you're trying to mount NTFS on ubuntu?08:20
tzdanofany one else know?08:20
tzdanofSaiki, no, trying to resize NTFS partition08:20
Saikitzdanof: mount and unmount it first08:21
massdivideRKyle, whats the adapter called in ifconfig -a ?08:21
tzdanofSaiki, i tried it already. will again tho08:21
Guest53401Saiki: well, the guy says he hasn't. But either way - I have set a new root password, which is mine. What I don't know, is how I can use it to modify/reset/cancel the annoying keyring thingy.08:21
gaelfxmassdivide: I was hoping to use the rt2800usb driver, I don't want ndiswrapper crap on my system08:22
SaikiGuest24011: give me about 5 mins to install some server packages and I'll load up a live CD and have a look for where it is08:22
SaikiGuest53401: give me about 5 mins to install some server packages and I'll load up a live CD and have a look for where it is08:22
SaikiGuest24011: sorry..08:22
t00tiehi, how can I remote desktop both ways between windows7 and 12.04?08:22
massdividegaelfx, that would be the simpliest way to get it to work. and the only known method i could find out for ya.08:22
gaelfxmassdivide: the issue is, the USB is detected, but the wireless adapter doesn't seem to be, like Jockey doesn't even offer the rt2870sta driver that should work for this adapter08:22
Saikit00tie: VNC can do that, I think..08:22
zetherooI have a bunch of files that look something like this 'file_1234_12:00:00' and I need to replace all the ':' symbols with '-'08:22
RKylemassdivide, Not sure, br0, eth0, and eth1 look exactly the same.08:23
SaikiRKyle: look for wlan008:23
massdividegaelfx, i had a similar issue with a sprint adapter that had its drivers on a 32mb nand08:23
massdivideRKyle, try iwconfig08:23
tzdanofSaiki, is there a link you have for better mounting instructions?08:23
Guest53401Saiki: I have launched ubuntu one installer under sudo -i, and it has asked me for a new keyring password. let's see where it is going to...08:23
RKyleSaiki, No wlan008:23
zetherooanyone know of a command which would accomplish this for me? (awk, sed, rename ... !?)08:23
goglilrcaballero  : sorry ! but it didn't help me08:23
Saikitzdanof: try adding -o force to the mount command08:24
gaelfxmassdivide: well, I guess I'll have to keep trying other stuff then08:24
massdivideRKyle, in iwconfig which one doesn't have "no wireless extensions"08:24
RKylemassdivide, There is only one and it is eth1.08:24
geirhazetheroo: Are they all in the same dir?08:24
zetheroogeirha:  yes08:25
lrcaballerogogli: are your able to create newaccounts?08:25
massdivideRKyle, does it say "no wireless extensions"?08:25
gaelfxI guess first I need to get the system to recognize it as a wireless adapter rather than a USB storage device, any idea how I might be able to do that?08:25
goglilrcaballero  : yes i can08:25
RKylemassdivide, On eth1 no, the rest yes.08:25
massdividegaelfx, the driver controls that aspect08:25
Guest53401Saiki: I can login to ubuntu one from console as root, but when trying to do it normally it still asks for my keyring password, which is not the one I have set as root.08:25
lrcaballerogogli: are you able to delete user accounts?08:25
Saiki#/bin/bash is for sh scrips, right?08:25
geirhazetheroo: rename -v 's/:/-/g' *:*08:25
massdivideRKyle,  ifconfig eth1 up08:26
goglilrcaballero : for ubuntu admin : no and rest : yes08:26
tzdanofSaiki, )>08:26
massdivideRKyle, sudo ifconfig eth1 up08:26
geirhazetheroo: after changing (cd) to the directory in question08:26
RKylemassdivide, Worked, thanks!08:26
zetheroogeirha: so cool - that worked! Thanks a million ...08:27
SaikiGuest53401: I haven't use a desktop in a while, I'm on a server editon atm08:27
massdivideRKyle, No problem mate. Easy fix.08:27
lrcaballerogogli: I know that by default this account is created so that you can install and remove software when taking Ubuntu for a spin...therefor you may NOT delete the admin account!08:27
tzdanofSaiki, could it be the problem at the bottom? http://gparted.sourceforge.net/larry/resize/resizing.htm08:27
micwhi08:27
Guest53401Saiki: ok, so should I wait or do you wish to abandone it?08:28
micwi wanto to install an ubuntu 12.04 server from a running debian using depootstrap08:28
lrcaballerogogli: this is just the most logical guess08:28
SaikiGuest53401: I need to write a quick shell script, then I can load up a livecd08:28
micwso i do: debootstrap --arch amd64 precise 999 http://kambing.ui.ac.id/ubuntu/08:28
tzdanofSaiki, it does have flag boot though08:28
micw(999 is the existign target directory)08:28
Guest53401Saiki: cool, thanks; so I'm staying here.08:28
micwbut it fails because the "precise" script is missing08:29
tzdanofmassdivide, is it an extended partition? my NTFS one08:29
goglilrcaballero  : well i try sudo visudo and change sudoers  and succeed but still don't delete it becuase of the following error08:29
SaikiGuest53401: yea, won't take me long, promise :)08:29
massdividetzdanof, the sliders won't move?08:30
lrcaballerogogli: try with gksu at the beggining from shell08:30
tzdanoftzdanof, sliders?08:30
tzdanofmassdivide, only backwords08:30
tzdanofmassdivide, wont go beyond 76 gb08:30
massdividetzdanof, the rest is swap...08:31
tzdanofmassdivide, even though i have 120 gb unallocated08:31
goglilrcaballero  :   sudo userdel ubuntu08:31
gogliuserdel: user ubuntu is currently logged in08:31
massdividetzdanof, oh i see now.08:31
massdividetzdanof, gimme a sec08:31
lrcaballerogogli: can you switch users? and then try it...08:31
tzdanofmassdivide, there is an option for swapoff though08:31
tzdanofSaiki,  any ideas?08:31
goglilrcaballero  : how to brutally logout other user08:32
Saikitzdanof: can you get a scrrenshot of the error?08:32
massdividetzdanof, send me that screen again08:32
goglilrcaballero  : how to switch from terminal ?08:33
tzdanofSaiki, massdivide http://i.imgur.com/mSs3a.png08:33
tzdanofmassdivide, Saiki i can turn swapoff apparently?08:33
Saikitzdanof: that's not an error08:33
lrcaballerogogli: http://www.basicconfig.com/linux-command/change-user-substitute-user-command-line-terminal-using-linux-su-command08:33
StarryNightanyone knows how to convert mp3 to caf?08:34
SaikiGuest53401: loading a VM now. it's being a little slow08:34
Guest53401Saiki: solved! I have deleted the .keyring file from ~/.gnome2/keyrings08:34
Guest53401Saiki: then I could just set a new one...08:34
SaikiGuest53401: hat works then lol08:35
tzdanofSaiki, what is it? why cant i increase its size?08:35
gogli lrcaballero : su ubuntu08:35
gogliUnknown id: ubuntu08:35
Saikitzdanof: easy, the partion has a neighbor08:35
massdividegogli, you trying to kick someone?08:36
tzdanofSaiki, ? the other NTFS one?08:36
Saikitzdanof: you see that unalocated space at the end?08:36
tzdanofSaiki, yeah08:36
tzdanofSaiki, i want to add it to the NTFS one08:36
Saikitzdanofyou need the to "move" to the other end of the drive08:36
goglimassdivide  : i think yes .   i want to delete ubuntu(by default) admin from live usb08:37
tzdanofSaiki, how08:37
Saikitzdanof: move sda4 all the way right, then move sda3, then sda208:37
tzdanofSaiki, fml08:37
Saikitzdanof: er.. not 2, just 3 and 408:37
massdividegogli, temporarily?08:37
tzdanofSaiki, 4 unmovable cos im in it08:37
massdivideStarryNight, acorrding to google, you can just rename it .caf08:38
tzdanofSaiki, how do you move partitions08:38
goglimassdivide : Haha ! NO ! permanently .08:38
Saikitzdanof: use a livecd, and you should eb able to just push them over08:38
RKyleOkay, new issue. I try to connect to my WPA Personal AES protected network and it tries to connect then asks for the password and repeats.08:38
massdividegogli, install ubuntu? lol08:38
tzdanofSaiki, none of them are pushable atm08:38
SaikiRKyle: laptop?08:38
RKyleSaiki, Yes.08:39
Saikitzdanof: are you on a LIVEcd?08:39
tzdanofSaiki, even though NTFS is resizable/movable08:39
AdvoWorkhow come if i run wine "/home/user/.wine/drive_c/program files/adobe/whatever.exe in the terminal, it works fine, but if i make a launcher as an application it won't. If i do a launcher but use terminal it works again but then has a spare terminal which I dont need?08:39
SaikiRKyle: are you surrently n it?08:39
tzdanofSaiki, no but i was08:39
Saikicurrently*08:39
gaelfxI need help getting ubuntu to recognize my wireless adapter as a wireless adapter rather than USB storage, can anyone assist?08:39
goglimassdivde  : i already installed on my live usb , but i'm sick of ubuntu admin08:39
StarryNightthanks i will try that08:39
Saikitzdanof: load the ntfs os partion let it do its check. it probably got flaged08:39
RKyleSaiki, Yes.08:40
massdivideRKyle, 1 of 3 things. 1. You card doesn't support full AES, choose a hybrid AES/TKIP option. 2. you have a WPS feature that you gotta enable. 3. You have mac filtering.08:40
lrcaballeroAdvoWork: everytime you invoke an app from terminal, the app is running from the terminal tehrfore it will continue to be open and if you close it you will also terminate the app.08:40
SaikiRKyle: this may sound stupid, but how close to the router are you?08:41
massdividegogli, say what?08:41
RKylemassdivide, It has worked before.08:41
RKyleSaiki, 30 feet maybe? I have 5 bars on my desktop.08:41
massdivideRKyle, your wpa-supplicant might not be running. reboot the system08:41
goglimassdivide : i want to see my login screen on ubuntu live usb08:42
goglimassdivide  : can you tell me  how ?08:42
massdividegogli, the live usb is designed to install ubuntu and reboot.08:42
goglimassdivide : O ! but i'm using persistence Live uSB08:43
massdividegogli,  so you wanna be root and remove ubuntu user/08:43
goglimassdivide : well, i have done half jod and now i want t delete ubuntu08:44
massdividegogli, sudo userdel ubuntu08:44
tzdanofSaiki: im gonna go crazy lol08:44
ikoniagogli: do not remove the ubuntu user08:44
tzdanofSaiki:  cant move anything08:44
ikoniagogli: that is your account to use08:44
tzdanofSaiki:  in live CD atm08:44
josef__Hi I hesitate between ubuntu 12.04 and linuxmint 13 cinnamon. It's the same thing for me but which of them is more complete and customizable ?08:44
gogliikonia : What ?08:44
massdivideikonia, I think he wants it to be a root "only" system.08:45
josef__for u08:45
ikoniathat is not a good idea08:45
ikoniathe whole security model is built around sudo08:45
tzdanofmassdivide: still SOL08:45
xCessiveHey, what's the easiest way to add Windows Active Directory Groups to the sudoers List? I already did the domain join, but adding groups from AD to the file doesn't seem to work.08:45
RKylemassdivide, Still the same thing, is it possible to force it on?08:45
massdivideikonia, for some people, sudo is 10 seconds of extra time08:45
ikoniaxCessive: you'll need to tell pam to use the ldap resolver libraries08:45
gogliikonia : i think i can do that08:45
lrcaballerogogli: read what I mentioned earlier about the purpose of the admin account08:45
ikoniamassdivide: that's what "sudo -i" is for08:45
ikoniagogli: then do it if you want to do it, but please don't ask this channel how to break your machine08:46
massdivideikonia, still requires a password.08:46
gogliok ! ikonia , i have a question08:46
ikoniaxCessive: from that point your sudo entries using the AD groups should work08:46
tzdanof. what to do know08:46
tzdanofanybody?08:46
tzdanofplz08:46
ikoniaxCessive: it can be a fiddle to work with, but once it's working it's straight forward08:46
tzdanofnever knew increasing a partitions size would be this much of a pain in the ***08:46
lrcaballerotzdanof: ask08:47
massdivideikonia, so does sudo su, that also gives you root@localhost, but some people don't like entering passwords, I for one use a biometric reader and send it to PAM08:47
Saikitzdanof: I'll be right back, need to reboot my PC08:47
ikoniatzdanof: is the partiton in use08:47
ikoniamassdivide: no, that's is a terrible idea08:47
tzdanofikonia: on live CD08:47
ikoniatzdanof: great, can you explain the issue then08:47
gogliikonia :  when i install ubuntu on desktop ,su -i also work fine08:47
massdivideikonia, what is?08:47
tzdanoflrcaballero: Saiki said i need to move my partition closer to the unallocated space08:47
ikoniamassdivide: sudo su08:47
gogliikonia : it don't have ubuntu admin in it08:47
tzdanofikonia: unable to move my partitions08:47
massdivideikonia, does the same thing as sudo -i08:47
ikoniagogli: I've made you aware of the potential problems, it's up to you what you do08:47
ikoniamassdivide: it doesn't08:48
ikoniamassdivide: there are slight differences08:48
ikoniatzdanof: can you explain a little more beyond that please.08:48
xCessiveikonia: thanks, i'll try to do that08:48
massdivideikonia, both return root@localhost. The path may be different, but the result is the same.08:48
goglimassdivide : su -i and sudo -i are different08:48
ikoniamassdivide: no, root@localhost is not a way to judge if they do the same thing08:48
lrcaballerotzdanof: are u dual booting?08:48
massdivideikonia, I don't follow you.08:49
tzdanofikonia: im trying to increase my windows NTFS partition. i have 120 gb of unallocated space. saiki said that i needed to move it closer to unallocated space. i cant move it08:49
tzdanoflrcaballero: yeqah08:49
gogliikonia  , massdivide : can somebody help me ?08:49
ikoniagogli: help you what /08:49
josef__Hi I hesitate between ubuntu 12.04 and linuxmint 13 cinnamon. It's the same thing for me but which of them is more complete and customizable (for you) ?08:49
ikoniatzdanof: there are limitations of moving partitions, eg: moving a primary partition into extended partition space, or viceversa, or moving a partition "after" an existing partition08:49
massdividejosef__, go with 12.0408:49
lrcaballerotzdanof: with Widows?08:49
tzdanofikonia: http://i.imgur.com/JU66f.png08:50
tzdanoflrcaballero: http://i.imgur.com/JU66f.png08:50
massdivideos[Linux 3.2.0-26-generic x86_64] distro[Ubuntu "precise" 12.04] cpu[2 x Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz (GenuineIntel) @ 800MHz] mem[Physical: 2.9GB, 71.7% free] disk[Total: 462.3GB, 92.6% free] video[Advanced Micro Devices [AMD] nee ATI M64-S [Mobility Radeon X2300]] sound[HDA-Intel - HDA Intel]08:50
gogliikonia :whe i use deluser ubuntu , it gave me an error that " ubuntu still login " , how to get ride of this08:50
tzdanofikonia: is there any way i can increase my windows partition size?08:50
ikoniagogli: don't login as that user08:50
tzdanoflrcaballero: yes08:50
ikoniagogli: however I'm not going to help you beyond that as it will put your system into an unsupported state08:50
zhenbeijuhello ,Every One,how  can I08:50
tzdanofikonia: want to remotely connect. see waht u can do?08:50
ikoniatzdanof: you've got an extended partition in the way08:50
ikoniatzdanof: I'm not remotly connecting to a machine, sorry08:51
gogliikonia : don't worry about it , i love to in  danger08:51
massdivideikonia, linux is about freedom, there is no "unsupported state"08:51
ikoniamassdivide: sure it is,08:51
tzdanofikonia: what do i need to do know?08:51
tzdanof*now08:51
lrcaballerotzdanof: read this http://askubuntu.com/questions/132170/resizing-my-linux-partition08:51
Andy80how do I change what a Launcher icon launches? It's bugged for me... example: I've two QtCreator installed in two different folders. I manually start the FIRST one I choose "Keep on Launcher" and the next time I click on the icon, the SECOND one is opened.08:51
ikoniatzdanof: you need to remove the exteneded partiton if you want to move data beyond it08:51
ikoniatzdanof: you may still have a few issues, but that is the bulk of your problem08:51
massdivideikonia, If you don't think so, why do you bother using linux in the first place?08:52
josef__massdivide : what are the positives that mint13 doesn't have ?08:52
V3NG3NC3Can someone explain something to me?08:52
ikoniamassdivide: I just agreed with you08:52
tzdanofikonia: extended is my SWAP isnt it?08:52
ikoniatzdanof: it looks that way yes08:52
tzdanofikonia: is that able to be removed?08:52
ikoniatzdanof: if you're not using it sure, you can also re-create it afterwards08:52
tzdanofikonia: okay. so i'll attempt. lets hope no system failures08:53
gogliikonia : i'm on fire >:-)08:53
massdividejosef__, it what it does have that makes it the problem. Gnome 3 is garbage. Unity while it has its faults, its far superior. personally I dropped them both and just use cairo-dock. but ubuntu has better support and can auto-update.08:53
wadiselamat sore08:53
ikoniajosef__: unity is gnome 3,08:53
tzdanofikonia: can i recreate swap as a not extended?08:53
ikoniatzdanof: sure sure,08:53
ikoniatzdanof: you may want to do that after you've resized/moved your partitions though08:53
ikoniatzdanof: keep in mind you can only have 4 primary partitions08:54
gogliikonia : gnome 3 and unity are different08:54
ikoniagogli: unity is a shell built ontop of gnome 308:54
tzdanofikonia: wont let me delete it O.o08:54
tzdanofikonia: from live CD08:54
massdividegogli, cntrl + alt + F1 , login as root, ps -u ubuntu, find gnome-session, and kill -9 the PID.08:54
goglignome 3 and unity are different shell08:54
josef__oh ...08:54
ikoniatzdanof: possibly because it's in use08:54
ikoniagogli: gnome-shell and unity are different shell, gnome 3 are the libraries unity use to run08:54
tzdanofikonia: is there a way to check?08:54
ikoniatzdanof: swapon -s08:54
tzdanofikonia: i turned swapoff08:55
ikoniatzdanof: does swapon -s show it08:55
tzdanofno08:55
tzdanofikonia: no, just categories08:55
gogli!unity08:55
ubottuUnity is the default UI since Ubuntu 11.04.  Unity is a shell for GNOME. see http://unity.ubuntu.com. For a GNOME 2-like experience, see !notunity08:55
gogli!gnome308:55
ubottuGNOME 3 is the desktop environment on which Unity is based.  To use GNOME Shell instead of Unity, install the "gnome-shell" package and investigate "gnome-tweak-tool". GNOME 3 is not supported under Natty/11.04, and may break your system if installed from alternate sources.08:55
ikoniatzdanof: that's odd, what's the error when you try to delete it (you're deleting the swap partition, not the extended one right ?)08:55
massdivide!cairo-dock08:56
goglihaha ! see ikonia08:56
massdivide:)08:56
ikoniagogli: you're just proved what I said correct08:56
goglihey ! massdivide : thanks bro08:56
Saikihm.. what's the start for a shell script that is using apt-get commands?08:56
ikonia#!bin/bash ?08:56
tzdanofikonia: http://i.imgur.com/iyf6a.png08:56
tzdanofikonia: im simply unable to do anything to it08:57
gogliikonia : ok ! hey ! Saiki ,,, can you correct us08:57
ikoniatzdanof: remove /dev/sda5 first, the linux swap partition08:57
massdivideikonia, lets get some coffee, my treat. lol08:57
ikoniamassdivide: what ?08:57
Saikigogli: What's up?08:57
massdivideikonia,  wanna go out for coffee? :P08:57
gogliwao ! massdivide purposing admin08:57
tzdanofikonia: removed. now i can increase NTFS?08:57
ikoniamassdivide: what are you talking about, this is an irc channel, please try to keep to realistic conversation, on the ubuntu support topic08:57
gogli: )08:57
Saikiikonia: thanks, not used to making scripts08:58
=== jeffliu is now known as bdot
ikoniatzdanof: you'll need to get the NTFS partition next to the free space08:58
ikoniatzdanof: I think you'll struggle, but with effort it should be possible08:58
tzdanofikonia: how can i move it O.o08:58
ikoniatzdanof: how I've just said08:58
tzdanofikonia: i deleted extended08:59
Saikitzdanof: at te FAR RIGHT pation, you see "space after"?08:59
massdivideikonia, bah. No sense of humor. Your like a robot. You need to get out of this text enviroment. 5 cups of ubuntu. Sound fimilar?08:59
ikoniatzdanof: is there anything of value on your linux partition08:59
tzdanofi suppose not08:59
gogliSaiki : is unity is based upon gnome3 for survival08:59
tzdanofikonia: just delete it huh08:59
ikoniamassdivide: please stop with this pointless converation.08:59
ikoniagogli: unity is a shell that runs o the gnome 3 libraries08:59
Saikigogli: I use server. I don't have gnome lol08:59
ikoniatzdanof: it maybe easier for you, remove the ubuntu partition, resize your windows one, re-install ubuntu08:59
chumassdivide: This is strictly a support channel. If you want to talk pointless conversations, join us in #ubuntu-offtopic08:59
ikoniatzdanof: depends on how much effort you want to put in09:00
tzdanofikonia: will the boot auto recognize that windows is left09:00
massdividechu,  no conversation is pointless. -Mark Twain09:00
ikoniatzdanof: yes it will, but if your in any doubt, use the windows install CD to put the windows boot loader back09:00
goglimassdivide : heads off09:00
ikoniatzdanof: if you remove your ubuntu partition grub will probably fail to boot09:00
Saikiikonia: grubwill fail to boot. guranteed09:01
ikoniaSaiki: yes, that's what I said09:01
tzdanofikonia: k thanks. i coulda saved a lot of time if i just woulda deleted it first.09:01
ikoniatzdanof: however if you are just going to use the livecd to re-size your partitions09:01
Saiki!grub09:01
ubottuGRUB2 is the default Ubuntu boot manager since 9.10 (Karmic). Lost GRUB after installing Windows? See https://help.ubuntu.com/community/RestoreGrub - For more information and troubleshooting for GRUB2 please refer to https://help.ubuntu.com/community/Grub2 - See !grub1 for releases before Karmic (9.10)09:01
ikoniatzdanof: you don't care that grub will fail,09:01
ikoniaSaiki: why are you pasting that ? what has that got to do with any of the discussion ?09:01
goglican i install window 7 after installing ubuntu ?09:02
ikoniatzdanof: delete the ubuntu partition, resize your ntfs partition, (use the windows CD to do an chkdisk before installing ubuntu if you want to be sure) then re-isntall ubuntu09:02
Saikiikonia: MBR can be restored without using the windows cd. I just didn't have the link09:02
ikoniagogli: yes, you can, you'll need to re-install grub though09:02
ikoniaSaiki: he doesn't need to restore the windows MBR09:02
gogli!mbr09:02
ikoniaSaiki: and look at the level of experience of the user you are suggesting that to09:02
ubottuGRUB2 is the default Ubuntu boot manager since 9.10 (Karmic). Lost GRUB after installing Windows? See https://help.ubuntu.com/community/RestoreGrub - For more information and troubleshooting for GRUB2 please refer to https://help.ubuntu.com/community/Grub2 - See !grub1 for releases before Karmic (9.10)09:02
daethorianHi. I'm on 10.04 LTS and I need to install Python 2.6.8 to get some fixes an application I run needs. What would be the best way to install 2.6.8? Can I use apt/dpkg or do I need to resort to manual compilation of the sources?09:03
ikoniadaethorian: if there is a python 2.6 package, you should use that09:03
Saikiikonia: I used it when I was a noob on this subject09:03
gogliSaiki , ikonia : don't fight .09:04
ikoniaSaiki: great, then you can walk him through it, should he need it09:04
ikoniagogli: no-one is fighting09:04
daethorianikonia: Yeah, but the one in the repos is on 2.6.5. I need 2.6.8.09:04
ikoniadaethorian: you're going to struggle to get 2.6.8 specifically then from an ubuntu package sadly09:04
Saikiikonia: I would have no problem doing that, but I need to find that cd link lol09:04
Noriandirhi. i have a local ftp server created with vsftpd. i can access it localy (through localhost or my local ip) but not with my external ip =/ anyone knows how to solve this?09:05
goglimassdivide :  where are you bro  ?09:05
crozCan someone help me install guest additions for virtualbox? When I'm trying to install windows 7 it's in24 bit mode instead of 32 bit.09:05
SaikiNoriandir: are you sure you didn't lock the address to 127.0.0.1?09:05
daethorianikonia: Alright. I thought about adding wheezy sources to sources.list, do an update and then remove the sources, but I feel like that might break the entire system. Would that be feasible or should I just manually compile?09:05
NoriandirSaiki: how could i've done that?09:06
gogliikonia : how to change lo[loop back ] address ?09:06
NoriandirSaiki: (its ubuntu 10.04 btw)09:06
[dlp]Anyone know when we are likely to see PulseAudio 2 in the Ubuntu distribution?09:06
ikoniagogli: you do'nt do that09:06
[dlp]AS it has some bug fixes that look interesting.09:06
ikoniagogli: the loop back address is important to stay the same09:06
SaikiNoriandir: look for a config file in /etc09:06
=== SushiDude is now known as Guest74207
ikoniadaethorian: that would be a very bad idea09:06
[dlp](I have bugs)09:07
daethorianikonia: I thought so. I'll compile. Thanks for your swift help!09:07
gogliikonia  : thats why i like massdivide . I need destruction09:07
NoriandirSaiki: related to who? vsftpd?09:07
SaikiNoriandir: yes09:07
goglimassdivide: where are you ?09:07
ikoniagogli: then find a different channel,09:07
ikoniagogli: he's not in this channel any more09:07
gogliikonia : can you tell me where he is now ?09:08
ikoniagogli: no, he's not on freenode any more09:08
Saikigogli you knwo you can use /whois <name> to find them, right?09:08
xCessiveikonia: i can login to my ubuntu machine with AD users, i dd the auth via kerberos09:08
ikoniaxCessive: that's great09:09
gogliSaiki : O !09:09
Saikiikonia: that cd link vanished from the ubuntu docs :(09:09
crozCan someone help me install guest additions for virtualbox? When I'm trying to install windows 7 it's in24 bit mode instead of 32 bit.09:09
ikoniacroz: 64bit ?09:09
xCessiveikonia: i can login to my ubuntu machine with AD users, i did the auth via kerberos and winbind in nsswitch but im not sure how to add the groups to sudoers file properly09:09
Saikicroz: we heard you the first time..09:09
=== Guest74207 is now known as SushiDude
croz:\09:10
gogliSaiki , ikonia : Thanks for the help .Can you tell me the time massdivide , when he is ON on freenode ?09:11
Dr_willisgogli,  check out memoserv bot. it can send him a message when they connect09:11
Dr_willissee     /msg memoserv help09:12
NoriandirSaiki: here's the conf file: http://pastebin.com/Tr7nX3hw09:12
NoriandirSaiki: but i haven't seen anything that would restrict the acess only to my network09:12
ikoniaxCessive: sudo has a seperate pam rul (I think) that's the one you've got to find09:12
ikonia"rule" sorry09:12
ikoniacroz: do you mean 64bit ?09:12
sixofourIs there any way to install ubuntu 12 on a pc containing the iso on the hardrive? or must I burn it to something? Also, I have a 1tb drive with win7, I want to make it a dual boot without erasing anything currently on the drive, will splitting the drive work?09:13
ikoniasixofour: partitioning the drive to offer some free space is fine09:13
sixofourwhat size would you recommend for the ubuntu partition and swap? i have 6gb of ram09:14
crozikonia i mean 32bit for display09:14
SaikiNoriandir: how are you tying to connect? (mask the ip if you wish)09:14
crozright now it's 24bit09:14
sixofourthe "data" partition will be the win7 stuff09:14
ikoniasixofour: it really depends on your usage, there are many theories and opinions on this09:14
crozand i googled and it says i need to install guest additions09:14
Cottussixofour, min 4Gb09:14
ikoniacroz: ahhh I see09:14
crozim trying to but i cant mount the cd in terminal i dont know how these people are doing it09:14
crozhttp://www.youtube.com/watch?v=FeEHqbFNaqw09:15
sixofourwell, its a gaming pc really, i7, ati radeon 6 something HD, 6gb ram09:15
ikoniasixofour: you have lots of hard disk space, so I would suggest using ram + 2GB, which will allow you to suspend + buffer09:15
Saikicroz mount /dev/cdrom /mount/point09:15
sixofourthough all i really play is minecraft and a few other indie games09:15
goglisixofour: 2 gb for swap[virtual memory ] + 5 gb for better storage =709:15
lrcaballerogood night everyone!09:16
sixofourwhy not 8gb swap jsut so its a nice number? :P09:16
goglilrcaballero  : good night09:16
croznando@Samsung /media/84DEB33DDEB325F8 $ sudo mount/dev/cdrom /mount/point09:16
crozsudo: mount/dev/cdrom: command not found09:16
Saikilrcaballero: sleep well09:16
goglisixofour : as you wish09:16
sixofourthe ubuntu partition needs to be a bit i think, 20gb sound good enough? this is jsut for ubuntu system stuff09:16
Saikicroz: space after mount09:16
Cottussixofour, max 1Gb swap,09:16
sixofour1gb swamp partition?09:17
Cottussixofour, with this much ram, it's not needed09:17
crozi did09:17
crozi dont know why it says that09:17
goglisixofour :20gb is good space09:17
sixofourhmm09:17
crozoops one second09:17
ikoniasixofour: I've given you my view of how you should use your swap09:17
SaikiCroz: no you didn't09:17
gaelfxok, I have a usb wireless adapter that has flash on it, so the device id in lsusb changes when I eject the flash disk, should I be trying to figure out how to get the adapter to work using the id from when the flash is mounted or from when it's ejected?09:17
NoriandirSaiki: i', trying with google chrome putting ftp://externalip09:17
croznando@Samsung /media/84DEB33DDEB325F8 $ sudo mount /dev/cdrom /mount/point09:17
crozmount: mount point /mount/point does not exist09:17
ikoniasixofour: you are not shy of disk, so using ram (allowing you to suspend) +2 for an overhead seems sensible to me09:17
wdpsixofour: /dev/sda5      ext4       38G     22G   14G   63% /09:17
NoriandirSaiki: tried also with: ftp myexternalip09:17
SaikiNoriandir: using linux?09:18
Dr_williscroz,  so make the mount point directory.09:18
Dr_williscroz,  that was an example path/name.. use what you want. it MUST exist.09:18
NoriandirSaiki: i recieve a timed out error09:18
sixofouranyways, about my first question, can ubuntu be installed from the hardrive, or do i need to make a boot disk? win7 is being retarded and doesn't seem to know how to make a boot disk09:18
NoriandirSaiki: yes, ubuntu 10.0409:18
SaikiNoriandir: try externalip:2009:18
ikoniasixofour: make a CD, or boot usb device, it's the most straightforward approach09:18
sixofourcan you boot from an sd card?09:19
gogliikonia : i agree with you09:19
ikoniasixofour: if your bios supports it, sure09:19
Dr_willissixofour,  i have some pcs that can boot and install from an SD card.09:19
Dr_willissixofour,  i have some that cant.09:19
=== tw__ is now known as t24w
croznando@Samsung ~ $ sudo mount /dev/cdrom /home/nando/additions/09:19
crozmount: no medium found on /dev/sr009:19
NoriandirSaiki: page it not available09:19
sixofourhmm,l i will be back in 10 minutes or so when I am ready09:19
Dr_williscroz,  so what type of disk is in the optical drive?09:19
croznone09:20
gogliHey ! what is IDE Drive ?09:20
crozim gonna use iso to install the os09:20
SaikiCroz: odd..09:20
Dr_willisgogli,  the older standard from about 4-5 years ago.09:20
Saikicroz: oh wait.. that was an iso?09:20
Dr_williscroz,  i think you need to clarify what you are doing exactly to the channel09:21
gogliDr_willis : i'm a student , sholud i need to use selinux ?09:21
SaikiNoriandir: check your pm09:21
Dr_willisgogli,  i doubt it.09:21
NoriandirSaiki: pm?09:21
crozI'm using a Windows 7 iso to install windows 7. When I boot up the virtual machine it looks horrible and says that it is in 24 bit mode and to enable 32 bit mode. There is no option to enable 32 bit mode. A little googling shows that I have to install Guest additions. I go to devices and click install guest additions but nothing happens.09:21
SaikiNoriandir: I sent you a pm09:21
Dr_willisgogli,  if you are a student research it.. check its homepage. learn about it.. then decide. :) thats what students do..learn.09:22
powwwrtocHi all, I'm running ubuntu 12.04... do I need to worry about the leap second bug on my servers?  How would I know if they're being affected?09:22
ikoniapowwwrtoc: should be fine09:22
tzdanofSaiki: grub failure09:22
Dr_williscroz,  the guest addations you use a MENU in the vbox interface to have it 'download and put the vbox guest' iso in the virtual cd for the vmachine.09:22
gaelfxI really need help here, I can't get my wireless usb adapter to function at all :(09:22
tzdanofikonia: grub failed09:22
powwwrtocikonia: I can't see anywhere that says the kernel was patched09:23
ikoniatzdanof: as I warned you it would09:23
Dr_williscroz,  you may want to check out the vbox docs/manual.  the virtual windows os. sees the  guest addations in its drive.09:23
crozDr_willis: I click devices and I select install guest additions and nothing happens09:23
tzdanofikonia: can you send me that link again?09:23
Saikitzdanof: yes, you deleted the partion with grub on it. can you burn CDs?09:23
crozoh so i have to install the OS first?09:23
tzdanofSaiki: nope09:23
ikoniatzdanof: you don't need a link, resize your partition using the livecd and then re-install ubuntu09:23
Dr_williscroz, err.. yes.. the guest addons are drivers for the guest os.09:23
tzdanofSaiki: i have a live CD though09:23
gogliDr_willis : ok!  is there any link between dhclient and proxy server  ?09:23
crozoh ok sorry09:23
crozlet me do that first then09:23
ikoniapowwwrtoc: I believe the most recent update should resolve the small risk09:24
crozDr_willis: you are always awesome! :)09:24
Dr_willisgogli,  not really noticed any. i rarely yse proxys09:24
tzdanofikonia: i cant boot onto windows partition?09:24
Saikitzdanof: what windows version are you using?09:24
tzdanofSaiki: vista09:24
ikoniapowwwrtoc: plus it will also be covered if your ntp source is up to date09:24
ikoniatzdanof: you don't need to09:24
Dr_williscroz,  last i checked the vbox manual at its homepage was very very handy. and had some info that you can easially overlook.09:24
tzdanofikonia: cant i disable or delete grub from booting?09:24
ikoniatzdanof: you need to boot your livecd, resize the partition, re-install ubuntu09:24
ikoniatzdanof: ok, I'm going to stop talking now, as you are not listening to what I'm saying09:24
Saikitzdanof: first off.. EW.. (now that that's out of my system...) 2nd, you should be able to laugh a startup repair with the vista dvd09:25
powwwrtocikonia: how can I check?  Are the symptoms just high load? My servers seem to be ok, but then they're usually not doing much09:25
ikoniapowwwrtoc: the symptoms are your clock will just not sync09:25
powwwrtocikonia: ok thanks09:27
gogliikonia : /etc/mail   ?   what is this mail used for ? is this for web-mail or what ?09:29
ikoniagogli: no,09:29
ikoniagogli: it's used as a configuration directory for your MTA09:29
gogliikonia : can you describe it  briefly ? i s these used by my mail client ?09:31
ikoniano09:31
goglisuppose i have a friend on network , i want t o send him message , is this mail used for ?09:33
fizyplanktonhow can i check screen resolution from cli? i used to know the command that would output about 10-20 lines of text about monitor statistics. but i forgot it. my comp is old, and gnome monitor tool causes catastrophic system failures. does anyone know the command?09:33
ikoniagogli: no09:33
ikoniahubx: it's used for your MTA, as I've told you09:33
ikoniahubx: sorry, that was for gogli09:33
ikoniagogli: it's used for your MTA, as I've told you09:33
Dr_willisfizyplankton,  xrandr perhaps.09:34
fizyplanktonDr_willis: just "xrandr"? no args?09:34
Dr_willisfizyplankton,  try it and see.09:34
Dr_willisim not on a linux box at the momemt09:34
Dr_willis!xrandr09:34
ubottuXRandR 1.2 is the new method of running dual screens in !X.  Information/HowTo here: http://wiki.debian.org/XStrikeForce/HowToRandR1209:34
gogliO god !Can somebody told me what is MTA ?09:34
gogli!mts09:34
Dr_willisMail Transfer Agent.09:34
fidelgogli: yep - wiki can. https://en.wikipedia.org/wiki/Message_transfer_agent09:34
ikoniagogli: I suggest doing research, this channel is for ubuntu support, not "please tell me about computers and software"09:34
fideldont be lazy ;)09:34
Dr_willisSomthing you dont need apranetly :)09:34
gogliso , why ikonia is saying me ,  /etc/mail is not used by web mail09:35
Dr_willisgogli,  its not used by your USER if using any webmail service like gmail.09:35
ikoniagogli: I said that the first time you asked09:35
fidelwell you are a quick-reader heh? ;)09:35
fizyplanktonDr_willis: dont give me that ubottu crap. im checkling the res on my 9 yr old single display laptop. my desktop is triple displays, and i had to ditch xrandr for xcinerama (*sob*). xrandrs dual display technology is seriously lacking09:35
Dr_willisgogli,  its used by your mail SERVER running on your machine.09:35
Dr_willisfizyplankton,  whatever.. last i checked xrandr printed out info about the monitors..09:36
Dr_willisfizyplankton,  i use nvidia twinview here most of the time.09:36
fizyplanktonxrandr says Can't open display09:36
gogliDr_willis : no, i get it09:36
Dr_willissounds like its running as a differnt user then. or needs the DISPLAY variable set. could be it needs X running also.09:36
gogliSorry   Dr_willis  : now i get it09:36
crozAny idea why every so often Firefox causes my computer to freeze? I have to ps aux |grep firefox and kill the firefox process. Well, it doesn't really freeze but I can't click around anymore and the mouse symbol stays as the hand gesture thing.09:37
fizyplanktonDr_willis: i know what it is. turns out xrandr cannot be used from ssh or from "screen". shame on me for trying it with both09:37
Dr_willisfizyplankton,  if you set DISPLAY to localhost:1  it might work.09:37
imadper阿弥陀佛09:38
Dr_willisI imagine xrandr needs/wants to be ran by the user who launched the X desktop, and from within X.09:38
fizyplanktonDr_willis: i got it to work. i just had to detach from screen and march my but over to the comp itself, rather than ssh. but yeah, my desktop is triple monitors, and it becomes 4 when i use synergy to tack on m y laptop. 5.5 million pixels on a wall of monitors 6 feet long. SO worth the 14 hours it took to write that damn xorg.conf file09:39
* Dr_willis is just using a 40 Inch TV as a monitor...09:40
Dr_willisi havent even bothered to attatch the 2nd monitor in ages.09:41
* fizyplankton uses a virtual 60 inch across monitor. its more than 60 diagonally.09:41
* fizyplankton cant do math, and meant 72 inch09:41
Saikihow do you install lampp?09:43
Dr_willis!lamp09:43
ubottuLAMP is an acronym for Linux-Apache-MySQL-PHP. However, the term is often used for setups using alternative but different software, such as Perl or Python instead of PHP, and Postgres instead of MySQL. For help with setting up LAMP on Ubuntu, see  https://help.ubuntu.com/community/ApacheMySQLPHP - See also the Server CD installation process (different in Edgy+)09:43
=== harobed is now known as stephane-klein
bent-stackDr_willis "4o inch TV monitor" = does it look low res? was thinking of getting one myself..09:51
Dr_willisbent-stack,  when you are sitting 2 ft in front of it.. its not idea for 'work' but i use it for games mainly.09:52
blackshirt.t09:52
Dr_willisbent-stack,  and  i had to work with the monitor settings under linux and windows and on the tv. to get the overscan stuff disabled. or i lost part of the display off the edges.09:52
Dr_willisAND the tv has so many fancy 'movie viewing' features. its constantly diming/changeing colors when it shouldent (when using  a desktop/work) that its annoying. But for movies/games - its great.09:53
gaelfxis compat-wireless installed by default in 12.04, or do you have to install it manually?09:53
bent-stackOk - I looked into pulling apart some 22inch LCD's to make a micro bezel between them09:54
Dr_willisbent-stack,  so over all.. for doing 'work' - a decent computer monitor would be best. I have seen newer monitors with very very small bezels.  and higher res then the tvs.09:54
bent-stackOk thanks for the advice09:54
Dr_willisI was looking at Monitors when i bought this. Just couldent find any larger monitors at the time. and the tv was on sale. :)  Its great as a tv.  great for games and movies. Lacking for just sitting here and doing IRC/Word Processing.09:55
Dr_willisbut I Can irc from across the room now. ;)09:55
bent-stack;)09:56
Dr_willisand for all TV's as a monitor - ive had to 'twiddle' with the Overscan settings.09:56
Dr_willisbut i can IRC and have the TV in the 'picture' in a Picture at the top right. :)09:56
=== spacebug is now known as spacebug-
manisabriI have a cosmetic question, terminal Icon in  launcher became the spring board icon. any way I can fix that?09:59
gaelfxlol, cosmetic question10:00
gaelfxI gotta remember that one10:00
Madkisshi there. With dkms, how do I create a .deb file containing a kernel module for the specific version I use on the system?10:01
manisabriglad to help the technical slang  ; ) but what about the icon mate?10:01
bent-stackmanisabri: Did yo try to right click on the app, select the properties , click on the ico10:04
Dr_williscould be the theme you are using is messed up also.10:04
Dr_willismay want ty try  a differnt icon theme. and perhaps set it back10:04
manisabriwhere do the launcher icons come from for applications?10:06
Dr_willisthey are defined by the apps .desktop files and come from the various themes which use a standarized set of names10:06
Dr_willisfor example try 'locate gedit.desktop'  and check out the contents of the file10:06
Dr_willisshould be an icon line in the file.10:07
azi`hello. anyone happens to know how to solve this issue? g10:07
AdvoWorkhow come if i run wine "/home/user/.wine/drive_c/program files/adobe/whatever.exe in the terminal, it works fine, but if i make a launcher as an application it won't. If i do a launcher but use terminal it works again but then has a spare terminal which I dont need?10:07
azi`hello. anyone happens to know how to solve this issue? http://pastebin.com/50B87JCD10:07
Dr_willisi think its 'gedit.png' for the icon. If you do a 'locate gedit.png' each theme should have its own gedit.png file.10:07
azi`i would like japanese support in ubuntu10:07
Dr_willisAdvoWork,  tryed making a script that just cd's to that dir. then runs wine whatever.exe   then make a launcher that runs that script in the background10:08
gaelfxazi`: have you tried adding it through the system settings?10:08
snikkeri want update a kernel on oneiric live cd, i've read the info in this page: https://help.ubuntu.com/community/LiveCDCustomization, but when i type "apt-get install linux-image", i've got a grub error: cannot find a device for / (is /dev mounted?).10:09
Dr_williscould also be wine is printing out some info to stderr or stdout and with no terminal its cant do it. (i rarely use wine, so cant be sure if thats the case)10:09
snikkersomeome can help me?10:09
Dr_willissnikker,  you are running that command from a live cd you booted?10:10
manisabriDr_willis: great , good starting point . just need to find out what are these .desktop files then10:10
gaelfxsnikker: you can't do that because the Live environment can't be rebooted with those kinds of changes10:10
azi`gaelfx: yes! it is not listed there10:10
gaelfxsnikker: you could try installing to a USB10:10
Dr_willismanisabri,  i belive the standard for them came from the freedesktop.org specs.10:10
gaelfxazi`: it's listed in mine...are you sure you're looking in the right place?10:11
Dr_willismanisabri,  they are used by a lot of parts of the system. Menu definitions,  X sessions, and so forth.10:11
azi`gaelfx: yes. on xfce though10:11
azi`gaelfx: i have two laptops both on xfce one lists japanese the other only english10:11
manisabriDr_willis, Do they define the Icon used in Unity Launcher too?10:11
foobArrrIs there an easy way to paste unicode symbols?10:11
azi`gaelfx: http://azi.dev.si/a.png10:11
snikkerDr_willis, gaelfx: i'm on chroot of live cd, i want rebuild this live cd with updated kernel10:11
Dr_willissnikker,  you dont rebuild a cd from the cd as far as i know. you need to have an installed system then you rebuild the live cd10:13
gaelfxazi`: yeah, that doesn't really help since it's just a list of installed languages, how did you get to that window?10:13
gaelfxsnikker: what Dr_willis said10:13
Dr_willismanisabri,  theres icon info in them.10:13
azi`gaelfx: settings->language support->install/remove languages10:14
DecWengHi, I just now try the permission of folders and files and cause unable to login as root user. What can I do?10:14
gaelfxazi`: try running sudo apt-get update10:14
Dr_willisDecWeng,  how are you trying to 'login as root user' ?10:14
jalalhow to change ubuntu 12.04 panel to down10:14
azi`gaelfx: did that and nothing happened10:15
azi`gaelfx: also tried dist-upate10:15
azi`gaelfx: also tried dist-update*10:15
DecWengthe first user10:15
jalalpanel is in left side i want it to get down10:15
jalalhow to do that10:15
azi`gaelfx: i think i might messed up the repositories.. is there a way to fix this?10:15
gaelfxazi`: well, reinstall tends to solve those kinds of problems10:15
Dr_willisjalal,  theres unofficial and unsupported and buggy hacks out there to put the pannel at the BOTTOM of the screen. check webupd8 and omgubuntu blog sites they mentioned it ages ago..10:15
jalalplzzz somebody help me10:15
azi`gaelfx: the repositories are in sources.list right?10:16
Dr_willisjalal,  they may not be useable any more. Or just use some dock for a bottom panel/bar/launcher10:16
snikkerDr_willis: yes,i've mounted squasfs of cd on my system and i've chrooted into it.10:16
jalal i want gnome-panel like in ubuntu 10.0410:16
Dr_willisjalal,  you mean you want the classic-gnome look.10:16
jalalwhich give me application places etc options10:16
jalalyess10:16
gaelfxazi`: yeah, but that's probably not the best way to change them. there should be an app or someting called software sources, or else you have to open software center and find in the file menus "software sources"10:16
jalalwhere all application organised10:17
jalalbecoze i am custmizing ubuntu10:17
Dr_willisjalal,  i just add a extra indicator-applet to unity that gives me a similer menu layout.10:17
gaelfxjalal: sudo apt-get install lubuntu-desktop10:17
gaelfx :D10:17
jalali have installed it10:17
jalali install gnome-panel too10:17
Dr_willisgnome-shell has more customization options - if you want to learn it.10:17
DecWengDr_willis: I just normally login at first. I try files and folders permission and cause unable to login as first user now10:17
Dr_willisDecWeng,  so what files and permissions did you change?10:18
jalaland i also want to change theme via terminal10:18
jalalthere anyway for adjuse theme from terminal?10:18
DecWengDr_willis: download  folder permission10:18
Dr_willisDecWeng,  the Download Directory permissions shouldent be keeping your user from logging in.  Try logging in at the console. see if that works for the user.10:19
DecWengDr_willis: can show command?10:19
xxbgdu91xxsalut10:20
Dr_willisDecWeng,  go to the console (alt-ctrl-f1 through F6) (f7 to get back to X) and see if you can login10:20
xxbgdu91xxSalut10:20
xxbgdu91xxj'ai un probleme avec mon ubuntu10:20
MonkeyDust!fr10:20
ubottuCe canal est en anglais uniquement. Si vous avez besoin d'aide ou voulez discuter en français, veuillez taper /join #ubuntu-fr ou /join #ubuntu-qc. Merci.10:20
=== tazjin is now known as tazjin|away
surmaHey guys. I'm struggling with an OpenVZ container image of 12.04. All I really need to know is: During the init process, which script (or daemon) is responsible for calling "mount -a"?10:27
ProcessorHi10:27
ProcessorAnybody to help a poor user?10:28
Dr_willissurma,  not on a ubuntu box right now to test.. but you could cd to /etc/init and do a 'grep mount *.conf'  (or are my arguments backwards)10:28
MonkeyDustProcessor  if you're sweet10:28
ProcessorI'm but not too much ;)10:28
ikoniaProcessor: you need to ask a question if you want help10:28
surmaDr_willis: /etc/init? That's new ^^ I've been grepping in /etc/init.d. Lemme see10:28
ProcessorI'm trying to forbiden access to usb mass storage on ubuntu 12.0410:29
Dr_willissurma,  its not new. :) its where upstart services start from.. Ubuntu been using Upstart for some time now. but it has a sysv 'emulation' sort of mode. so many people dont notice it.10:29
ProcessorI added usb_storage  on blacklist.conf but it did not helped10:29
surmaDr_willis: There's a mountall.conf *facepalm* I guess that's what happens when you never use upstart10:29
Dr_willisProcessor,  what filesystem is the usb device? have you just trried to mount it?10:29
surmaDr_willis: Thanks a lot10:30
Dr_willis:)10:30
Processorfat10:30
ProcessorI tried a modprobe -r usb_storage but it did not helped too10:30
Dr_willisProcessor,  why would you blacklist? Try mounting it by hand. see if any errors show up. or see if root can access it. IF its alrleady mounted10:30
Dr_williswhy would you be doing this modprobe stuff befor you tried other things. ;)10:30
AdvoWorkDr_willis, how can I make it run in the background, or does background assume just a terminal script?10:31
Wand3r3romfg10:31
Dr_willisAdvoWork,  the scrit could do 'wine whatever.exe &' perhaps. then it would return.10:31
ProcessorI don't want that user can put an usb drive or key get some data on a pc10:31
Dr_willisProcessor,  now that we have the original question in a way we understand... ;)10:32
Wand3r3ranyone good with encryption here?10:32
sixofourHmm, I installed Ubuntu 12 now... my first concern is, is there any way to totally get rid of this ugly unity stuff and use gnome? I got the "gnome panel" thing, but its sitll unity just slightly different. Is there any way to get the full gnome desktop environment that we had in ubuntu 10 back?10:32
surmaDr_willis: But the kernel's init parameter is still /sbin/init, isn't it?10:32
heylukecarriersixofour, google around installing gnome shell; I'm not sure about Gnome 2 if that's what you're looking for?10:33
ProcessorI remove  the right to use external storage on user privilege but it did not worked too10:33
Dr_willishttp://askubuntu.com/questions/25110/disable-auto-mount-for-particular-partitions-on-usb-drives       may be similer to what you  want Processor10:33
sixofourI guess thats what I am looking for. I';ll check.10:33
sixofourThis unity stuff is horrifying, its like i am on a huge ipad10:33
Dr_willissixofour,  its  nothing like the ipad.. and unity has some very nice features.10:33
compdocyou get used to Unity after a while10:34
Dr_willisGnome-shell is equally 'weird/new/differnt'10:34
sixofourIdk, its seems extremely limited.10:34
yeats!nounity | sixofour10:34
ubottusixofour: Ubuntu 11.10 and higher use GNOME 3 with the !unity shell by default.  To use GNOME Shell instead, install the "gnome-shell" package and investigate "gnome-tweak-tool".  For GNOME Fallback mode, which is similar to GNOME 2, install "gnome-panel". Both packages will place entries in the Sessions dropdown. Using Natty? See !classic10:34
Dr_willisand how long have you actually used unity?10:34
sixofourFor example, you can't even resize the desktop background.10:34
ssrvmDr_willis, yes like e.g. heating/eating/hanging your intel inbuilt graphics card10:34
Dr_willisI recall all the 'gnome 2 is limited' rants over the years also.10:34
ProcessorI'll check10:34
Processorthx10:34
Dr_willisUnity works well on my low end netbooks.10:35
heylukecarriersixofour, personally neither Unity nor Gnome 2 do it for me any more... I think you ought to give Gnome 3/shell a shot before trying 210:35
sixofourAnd the lack of scrolls bars is jsut...wat10:35
heylukecarrierDr_willis, Unity was lovely on a Netbook, it just doesn't (imho) scale well to desktops10:35
Dr_willisscroll bars are hidden by default for a cleaner look. and thats easially disabled.10:35
bindiIs there any window manager that works like windows (sorry for using this curse word here :D) 7's one? I want small icons, no labels, and same icons/apps stack10:35
sixofour^10:35
sixofourthat10:35
Dr_willisbindi,  lubuntu, xubuntu, or try some stand alone window managers like icewm or others.10:35
sixofourIS KDE still around?10:36
yeatssixofour: yes10:36
bindihmm10:36
bindiI'll check it out then, thank you10:36
Dr_williskde4  is still here.10:36
sixofourLast tikme I used ubuntu was ubuntu 10, it was new then.10:36
* yeats was going to suggest KDE10:36
Dr_willisand is even weirder then unity in ways. :)10:36
ssrvmsixofour, yes and its great* ............ *depends on your choice!10:36
Dr_willisOld skool desktops = Lubuntu/lxde or xubuntu/xfce10:36
sixofourThough, I didn't like the Dolphin file manager10:36
ssrvmDr_willis, yes kde is too much weird. in todays world it allows easy simple navigation. good looking desktop. animations. etc not like unity.10:37
sixofouri'll google lubuntu or xubuntu10:37
Dr_willis You could always roll your own desktop. :) pick a wm, pick a file manager, add on stuff you want.10:37
yeatsyeah - there was just as much furor about kde4 as there is currently about unity/gnome310:37
sixofourI'm not that pro of a linux user :P10:37
Dr_willisi find kde even more confuseing then unity.10:37
Dr_willisgadgets and gizmos and other stuff that seems to do nothing by default.10:37
Dr_willisI have heard that KDE tablet. has a nice setup however.10:38
sixofourWell, i'll look around, see if I can find a way of getting rid of this Fisher-Price desktop environment.10:38
yeatssixofour: you might also investigate MATE or Cinnamon10:38
surmaOkay, I think I have figured out the problem: In the openVZ container, no services are started with upstart. What is the command to make the system initialize itself?10:39
ssrvmsixofour, yep try cinnamon. but it does not have official ubuntu packages. and not official included in repo. but otherwise it works very good.10:39
sixofouratleast this gnome panel has a taksbar, thats a +10:39
Dr_willissurma,  thats weird.. upstart is like the core of the  system for starting up.10:39
MlysianDr_willis: Hi, I thought I had changed the permission of my home folder10:39
Dr_willisthe  idea of a taskbar is getting outdated. :)10:39
Dr_willisnow its launcher+taskbar combos10:40
sixofourmeh10:40
yeatssixofour: I would install gnome-shell and gnome-tweak and go to extensions.gnome.org to tailor it the way you want10:40
sixofourI am sure there will always be old school people like me who want a desktop, not this unity/metro style stuff. Its a pc not a phone.10:40
Dr_willisyou can easially add a dock or add a taskbar in other ways10:40
dubac0#scotlug10:41
surmaDr_willis: I know, but I guess my host system is too old to know about it. So I figure it passes an wrong init kernelparameter or something. That's why I wanna know what command initializes the system10:41
sixofouryeah gonna look gnome-shell up in apt-get or something [if there still is an apt-get]10:41
MlysianDr_willis: Hi, I am just now that guy who can not login as root user10:41
yeatssixofour: heh - yeah - APT's not going anywhere10:41
ssrvmMlysian, you want to reset root password?10:41
MlysianDr_willis: I had unintentionally change the permission of home folder10:42
Dr_willisMlysian,  if you messed up the permissions of your home directory or /home/user directory. you may need to use recovery/rescue mode or a live cd to fix it.10:42
Dr_willisIm not even sure HOW you unintentally change permissions on home. :)10:42
sixofourAsudo apt-get install gnome-shell.. easy as that, not flipping through apps10:42
sixofourno *10:42
Dr_willisgnome-shell does not have the classic gnome menus.. :) unless you add a extension for them10:42
sixofourwell i plan to go to that extension site10:43
Dr_willisthat site is a nice neat new feature in the latest gnome-shell.10:43
sixofourare the other popular distros of linux going to equally desktopless styles?10:43
Dr_willissixofour,  most are going to gnome3/gnome-shell.10:44
Dr_willissome still use kde.10:44
yeatssixofour: yes, but you might try Linux Mint, which is doing its best to ease the switch10:44
ssrvmsixofour, this is free world. not the propriatary. you can always have all the permutation combination10:44
sixofouryeah a friend of mind installed mint on anothe freinds computer, it looked nice10:45
sixofour[and it worked, as opposed to vista]10:45
manisabriIf I run terminal by ctrl+alt+t its icon will be the spring board icon, iny ideas?10:45
Dr_willismanisabri,  if you run it via Hud, or the Dash it has the right icon?10:46
manisabriDr_willis yes that way the icon is right10:47
Dr_willisid just pin the terminal to the panel :)10:47
sixofourthis irc client i am using is weird too, all of the text appears in "talk bubbles"10:47
sixofourwith a little man next to it10:48
heylukecarrieryeats, personally I found KDE3 awful to navigate and use... though I still prefer Gnome 3 to KDE4 it does seem like a huge step forward10:48
manisabriDr_willis I liked the idea of not using mouse to open the terminal10:48
Dr_willismanisabri,  try guake10:48
Dr_willis!info guake10:48
ubottuguake (source: guake): Drop-down terminal for GNOME Desktop Environment. In component universe, is optional. Version 0.4.2-7 (precise), package size 147 kB, installed size 894 kB10:48
sixofourwhat was the command for apt-get search again?10:49
Cottusapt-cache search is one..10:49
Cottusaptitude search i prefer10:49
surmaDr_willis: Is there some short, good introduction to upstart? I suspect that most services are disabled, I just don't know how you change something like that?10:50
Dr_willis!upstart10:50
ubottuUpstart is meant to replace the old Sys V Init system with an event-driven init model.  For more information please see: http://upstart.ubuntu.com/10:50
Dr_willisive never really noticed a beginners guide to upstart.  Some blog sites may have some.  never really looked for one. Never needed one.;P10:51
surmahehe, well, it needn't be for beginners. I know the principle. Just don't want to go through 200 pages of documentation ;)10:52
surmaDamn OpenVZ10:52
sixofourlooking somewhat much better10:53
sixofourscroll bars are still missing10:53
Oli_How do I know whether I want 32 or 64 bit?10:53
heylukecarrierOli_, what OS are you using at the moment? Windows? Mac? Linux?10:53
Dr_willisOli_,  if your hardware supports 64bit - go 64bits10:54
gaelfxOli_: if you have a 64-bit processor, I would choose 64-bit, if you're not sure, 32-bit should work no matter what your processor is10:54
Oli_I'm using linux at the mo on the computer I want to install it on, it's intel atom, that's 64 bit right?10:54
matthewgmattyg10:54
yeatsheylukecarrier: yeah - I got used to kde4 pretty quickly too10:55
Dr_willissome atoms are 64bit some are 32/10:55
Oli_n450 i believe it is10:55
Saikiyeats: on windows now?10:55
Dr_willisOli_,  unless you got a lot of ram. You could just go 32bit.10:55
yeatsSaiki: nope10:55
Saikiyeats: wrong person..10:55
Dr_willisOli_,  i always go 64bit on hw that supportes it. because i do a lot of video encodeing. so even a 1% gain in speeds for encoding is worth it. ;)10:55
SaikiOli_: on windows now?10:55
gaelfxOli_: as a person who has used a fair number of netbooks, I strongly advise 32-bit10:56
Dr_willisnetbooks are so low end. :)  it wont matter.10:56
Oli_Is 64 bit just for 3gig+ ram like on windows?10:56
Dr_willisI do run 64bit on my netbook.10:56
gaelfxDr_willis: not all of them, some of the 12 inchers are pretty decent hw10:56
heylukecarrierOli_, what's the output of this command? grep 'model name' /proc/cpuinfo10:56
surmaDr_willis: If you're interested: Turns out, the mountall.conf job fails because `mountall --daemon` yields `mountall: root filesystem isn't mounted` and that of course stops the whole init process10:57
gaelfxOli_: not exactly, but that's the main advantage10:57
Oli_I believe i have the n450 and that is 64bit, i just checked, i'll give you the output of that command in just a second10:57
sixofour.10:58
Oli_Yeah, that command confirms it is n45010:58
=== matthewg is now known as mattyg
sixofourIs there any way to change the admin name that is displayed in the top right?10:58
Oli_I'll get 64 bit then10:58
sixofourwell, the username on the admin account*10:58
heylukecarrierOli_, I'd recommend 64-bit then10:58
gogliHey ! ikonia11:01
gogliikonia : i have deleted ubuntu admin from live USB11:02
ikoniagogli: I don't really care11:02
ikoniagogli: I advised you not to do it, it's up to you if you do it or not11:02
gogliikonia : now i'm the only admin and i get the login screen too11:03
ikoniagogli: as I said, I'm not really interested - it's up to you what you do11:03
gogliDr_willis :  can you suggest me some good lesson on classless addressing on ubuntu11:05
Dr_willisi have no idea what the term 'classless addressing' even means11:05
gaelfxOli: N450 is 64-bit compatible, but it's not really 64-bit proc11:05
goglidr_willis :   its like 192.168.0.0/24 type11:07
Dr_willistheres numerous sites and guides on networking fundamentals.11:07
linuxtechDr_willis:  You recommended some USB boot/rescue software for the manaul fsck I need to run.  What software was it?  Will it fit on a 256MB USB and will it also enable me to do a net install of mythbuntu if needed?11:09
gogliHow to update cache of software packages using terminal ?11:10
MonkeyDustgogli  sudo apt-get update11:10
sixofourDr_willis:  how do I show the scroll bars?11:11
advance420hey everyone11:11
=== glebihan_ is now known as glebihan
ikoniagogli: when you apt-get update it updates the cache11:12
goglii have run it , but when i run " sudo apt-get install ubuntu-restricated-extras "    it unable to find them11:12
gogli: ( , can you tell me , why ?   i have run sudo apt-get update 3 times , but it doesn't update my cache11:13
MonkeyDustgogli  first check if the package name exits, use apt-cache search to that end11:13
MonkeyDustexists*11:13
glebihangogli, it's ubuntu-restricted-extras, not ubuntu-restric*a*ted-extras11:13
burghello. how can i add read/write permissions to an user for a folder, if that folder is owned by another user? i know there was a way (not chmod or chown to change ownership, i want the owner to keep its permissions), but i forgot how11:13
goglisudo apt-get install ubuntu-restricted-extras11:14
MonkeyDustburg  add the user to the same group of the other user, no?11:14
geirhaburg: or create a group for the purpose, set that group as group owner of the directory11:16
burgMonkeyDust, geirha, i found it, it was setfacl11:16
goglihere is my error  : http://paste.ubuntu.com/1074619/11:16
geirhaburg: Ah right, acls is another way to go, but requires that the filesystem as acl enabled11:17
Dr_willissixofour,  the webupd8 blog site has a guide listing common tweaks people like to use - that include  disabling the hidd4en scrollbars11:17
burggeirha, how should i do that? it is not enough to install acl?11:17
Dr_willistab completion - works for apt-get ubuntu-re<tab>    ;)11:18
glebihangogli, check in your software sources whether the multiverse repositories are enabled11:18
gogliglebihan : they are not unable , i'm unable to update cache11:19
glebihangogli, ?11:19
gogliglebihan : they are not enable , i'm unable to update cache11:20
flomarhi, I experience a suspend/resume bug on 12.04. Screesn stays black upon wakeup, only mouse visible. Have to hardreboot. I get an a brief errormessage to (PM: Device 00:0a failed to suspend: error -19). Anyone has a guess how to report this as a bug, against what package, etc...?11:20
Dr_willis'sudo apt-get update'  works or not gogli ?11:20
glebihangogli, you need to check the "multiverse" checkbox if the software sources application, and then run "sudo apt-get update"11:20
glebihans/if/in11:21
gogliwhen i click on "use source " , it doesn't work for me11:21
glebihanuse source ?11:21
goglisudo apt-get update works but doesn't update my cache11:21
gogli:  (11:21
geirhaburg: install acl, and add the acl option to the fstab entry11:22
glebihangogli, again, you need to enable the multiverse repositories *before* you run apt-get update11:22
ahhughesI have two nix machines, what is the recommended way to mount a drive(s) between the two?11:22
Dr_willisahhughes,  you mean share the files across the network?11:22
gaelfxahhughes: I would suggest NFS, it works pretty well for me11:23
gogliglebihan  : multiverse is also enabled11:23
Dr_willisssh, sshfs, nfs, ftp, samba, ... depends on your needs11:23
glebihangogli, ok, could you pastebin your /etc/apt/sources.list file ?11:23
gogliUbuntu Software Center -->Software Source -->enabled11:24
smooth_penguinhi, does anyone here use a ZTE MP190 HSUPA 3g dongle?11:26
goglihttp://paste.ubuntu.com/1074629/11:26
smooth_penguinim having trouble connecting with it11:26
ahhughesDr_willis, yeah.. I have some samba shares... which I can mount but not sure that's the best solution11:27
Dr_willisahhughes,  totally depends on whats on the filesystems. and how you need to access them11:27
Dr_willisahhughes,  i just use sshfs for my needs.11:27
glebihangogli, could you paste the whole file please (without the lines being cut at the end) ?11:27
gogliok11:28
ahhughesDr_willis, well... most are large media files. But I also want to be able to access these from windows11:28
Dr_willisahhughes,  windows = you use samba then11:28
Dr_willisahhughes,  video files - you may want to use a upnp server.11:29
ahhughesI have mediatomb11:29
goglihttp://paste.ubuntu.com/1074630/11:29
gogliglebihan  : should i need to paste output of "sudo apt-get update "  ?11:31
glebihangogli, yes, go ahead11:31
blackgatocatnegrWhat antivirus you guys use on ubuntu? and please avoid the "No virus for linux" speech11:32
AssociateXHello folks!11:32
compdocI use rkhunter and clamav11:33
snikkersomeone can help me for rebuild a ubuntu live cd with updated kernel?11:33
gogliyou have to wait for that : )   , my connection is slow11:33
gogliglebihan : )11:33
AssociateXis there something like klipper on the 12.04 Ubuntu release? I want to see my previously highlighted text entries.11:33
gogliwait for 8 minutes ...Ok !11:34
blackgatocatnegrI use avast11:34
glebihanblackgatocatnegr, that's still the answer you're likely to get, most users do not use any antivirus because there's basically no point in using one11:34
blackgatocatnegrclamavy has a high number of false positives11:34
Dr_willis!info glipper11:34
ubottuglipper (source: glipper): Clipboard manager for GNOME. In component universe, is optional. Version 2.3-1 (precise), package size 60 kB, installed size 528 kB11:34
Dr_willisIts best to use more then one AV scanner. :) in any case.11:35
AssociateXthank you Dr_willis11:35
blackgatocatnegrwell, so far we have over 600 malware for linux, but....11:35
blackgatocatnegrcant do much without root acess11:35
compdocclamav has no false postitives on any of my servers11:35
Dr_willisive had AV software say my Zipped AMIGA floppy disk image files have Viruses on them. :) not very likely a mondern virus is on a 15+ yr old floppy disk image.11:35
compdocor incoming emails11:36
blackgatocatnegrclamav is infamous for false positives, so far I remenber a sonic fan game, (Tried it in other 3 antivirus with max heuristics and nothing) and dos games11:36
=== el is now known as Guest86990
blackgatocatnegrgranted, amiga files may trig some antivirals11:37
blackgatocatnegrbecause of weird non standar format and that11:38
Dr_willisbetter to have false positives... then missing somthing.11:38
auronandaceDr_willis: only if you are able to recognise them as false positives11:39
coderhuthi everyone..i am getting error in connectin when i try to connect to database server using sqlyog. my senior told me to run .opentunnel command whenever this happens in terminal. but this command is not working either11:40
Dr_willisWeirdness.. i can somehow have files on my NTFS drives  that windoes cant copy/rename/move.. but i can easially alter in Linux.  These were made by extracting a .zip archive that aparently had either some odd filenames, or very very long/deep paths..11:41
blackgatocatnegrmmm11:41
blackgatocatnegrlinuc has a longer filename limit than windows11:41
blackgatocatnegrlinux11:41
Dr_willisFutureama Fry: 'not sure if thats a bug or a feature'11:42
Dr_willis;)11:42
blackgatocatnegryou are just using the wrong programs11:42
Dr_willisthe window file manger wont rename, or move the files.11:42
Dr_willisshows the parent dir as having size of zero. even tho theres about a gb of files in it also.11:42
blackgatocatnegrmmmm11:42
Dr_willisgoing to boots to linux to see what i can do with them i guess.11:43
blackgatocatnegrsay you cant delete the files on linux?11:43
Dr_willisI can delete/rename/whatever them on Linux.11:43
Dr_williscant on Windows. even tho they are on a normal windows NTFS.11:43
blackgatocatnegrthen delete them just in case11:43
blackgatocatnegrhad a similar problem before, ended being virus11:43
blackgatocatnegrtry 7zip it can do amazing stuff on windows11:44
blackgatocatnegr7zip could read files windows could not11:44
blackgatocatnegranyway, the usual in those cases?11:44
blackgatocatnegrbott with puppy, and delete junk, then run antivir and anti malware11:44
Dr_willismakes me wonder if 7zip wasent the oritinal problem. the files came from a .zip of ebooks11:44
blackgatocatnegruse 7zip to delete them11:45
blackgatocatnegror just puppy linux11:45
Dr_willisthey are ebooks i want to read. :) so i dont want to delete them11:45
blackgatocatnegrwell11:46
blackgatocatnegrif some of them have  0 bit files11:46
blackgatocatnegrthey are junk files at most11:47
goglihttp://paste.ubuntu.com/1074649/11:47
blackgatocatnegrvirus, troyans at worst11:47
ikoniagogli: why are you posting that ? what do you want us to do with it ?11:47
gogliglebihan   :  http://paste.ubuntu.com/1074649/11:47
goglimy output for sudo apt-get update11:48
blackgatocatnegrjust use synatic to remove the repos you don't want11:48
blackgatocatnegrfor example, you don't really need the cd11:48
=== jay is now known as Guest10901
ProcessorHi Dr_Willis so I read the doc you sent about disable UMS http://askubuntu.com/questions/25110/disable-auto-mount-for-particular-partitions-on-usb-drives11:49
gogliikonia : please hand my output to glebihan     .Now i have to go in hospital for my checkup .Today i'm caught by fever .Ok ! Please11:49
Processorbut it di not helped as in my case the user could use any usb key or drive11:50
ikoniagogli: he can see what you paste, he's in the same channel11:50
blackgatocatnegrgogli, synaptic and update manager11:50
blackgatocatnegrthats usually how you fix any errors in the repos11:50
Dr_willishmm.. must been too long of names/dirs - shortened a dir name. and now they all work.11:51
gogliO ! glebihan  ,,, Hey ! bro ...Please check my output11:51
blackgatocatnegrone tip, install japanese and chinese fonts11:51
=== dark3n|off is now known as dark3n
Guest10901hi - my usb wireless broadband works great when i plug it into my 10.04 ubuntu netbook,  but it doesn't register that i can use it into my 12.04 laptop. how may i get my 12.04 box to register that GSM network?11:54
=== lun_ is now known as lun0
sixofourSo, I am thinking I will remove ubuntu all together and get Mint to use with Cinnamon, whats the easiest way of doing that?11:54
Dr_willissixofour,  see mint channels for mint support11:54
Guest10901u can do it from the command line, belive it or not11:55
gaelfxneed help with a USB wireless adapter that shows up in lsusb but is apparently not recognized by the system as a wireless adapter, can anyone help?11:55
sixofourUninstalling Ubuntu is ubuntu support.11:56
Dr_willissixofour,  no its not.. you just install the other os over it..11:56
Dr_willisyou dont 'uninstall' it11:56
sixofourHeh, really?11:56
=== lun0 is now known as fear_me_lun0
sixofourWell, I never have done a dual boot before.11:57
sixofourIt makes sense.11:57
Dr_willisask in #windows how to Uninstall windows...  they will look at you funny also.11:57
sixofourlol11:57
sixofouryeah brainfart there11:57
sixofournevermind11:57
sixofouranyways thanks for the help today11:57
Dr_willisgood luck with Mint - you will need luck..11:57
sixofourbut the whole itnerface thing, even fiddling with gnome 3, is crippling to me11:58
Dr_willisand you have used it for all of .. what? an hr?11:58
=== fear_me_lun0 is now known as lun0
Dr_williswe mentioned using Lubuntu, or Xubuntu, or other desktops.11:58
sixofourwell, i was going to try to use cinnamon, but I don't know how I could do that without having unity like...at all11:59
Dr_willisgnome-2 is basiucally dead. I imagine these attempts to keep it alive will be gone in less then a year.11:59
=== quesada_ is now known as urlwolf
Dr_willisInstall the desktops you want - select them at the login screen.  no need to remove unity in most cases.12:00
Dr_willisBut Cinnamon is not suppored by us here in this channel. ive heard it can break things..12:00
sixofourWell, I tried that, and even with gnome 3, the lack of functionality was still there, simple things like playing icons on the taskbar was not psosible12:01
sixofourplacing*12:01
sixofouri was stuck going into that horrid "applications" menu because there was no menu listing programs12:01
sixofourthere was no scroll bar so you kept clicking out of windows12:02
Dr_willisyou can easially add classic-gnome menu to unity.12:02
Dr_willisscroll bar auto-apears here for me.. so i never have that issue either.12:02
sixofourit should always be there, why remove, its retarded12:02
Dr_williswhatever.12:02
Dr_willisits fairly easy to reenable the scrll bars also.12:03
sixofourthis is pretty sad actually, if linuix distros are going into this bad style of itnerface, along with windows 8 adopting the same horrible interface.... what is left... mac? lol12:03
Dr_willisrant some more about it in the support channels.. it may help.12:03
Dr_willisor learn to tweak it how you want12:03
sixofourI want it exactly like gnome 2, look and functionality12:03
gaelfxsixofour: try Lubuntu12:04
sixofouri'll look into that12:04
Dr_willisgnome2 is dead. if you inssist on gnome-2 find some of the disrtos at disrtowatch that still use it.12:04
Dr_williswe have offered dozens of suggestions.12:04
Dr_willisbrb12:05
gaelfxsixofour: it's even better than gnome2, imho12:10
ahhughesI've add a new share in smb.conf... what is the windows domain I need to use to connect to it by default?12:10
geirhaahhughes: Not sure what you're asking, but isn't the default Windows domain "MSHOME"?12:13
gigixMSHOME for home edition and WORKSPACE for professional ?12:13
blackgatocatnegrok, I got two particions, one with ubuntu the other with windows, need to add grub, any recomended program?12:14
wicaHello, where can I get some more information about casper for a live cd. I wanne make some changes to the scripts12:15
geirhablackgatocatnegr: https://help.ubuntu.com/community/RestoreGrub12:17
ahhughesgeirha, its actually the domain of the linux samba share that I dont know12:18
geirhawica: https://help.ubuntu.com/community/LiveCDCustomization12:19
yeatsahhughes: that will be set in /etc/samba/smb.conf12:19
blackgatocatnegrthank ya12:19
PapaSierradoes ubuntu publish info on when packages will become available? for example php is on 5.3.10 but i really want 5.4.412:19
BluesKajHiyas all12:19
blackgatocatnegrpapssierra, if you really wanna be up to date, you will have to compile12:20
blackgatocatnegrbye12:20
wicageirha: Thnx, I missed that site12:20
Halexander9000Greetings from Eastern Europe! Could someone help me restore my sound output from my computer? I have an ASUS EEE PC 904HD running UBUNTU, and today while watching a Youtube video, the audio just upped an muted itself. Tried the audio mixer, everything was set to high, still nothing. Tried Pavucontrol from the console, still nothing. Could someone please help me?12:20
yeatsPapaSierra: you can check Debian unstable for which version it's using - the next Ubuntu release will probably be close to that12:20
crazyandi86hi! i want to downgrade xserver-common from 2:1.11.4-0ubuntu10.3 to 2:1.11.4-0ubuntu10.2, how to do that the easiest way?12:21
Halexander9000I even rebooted. Still nothing.12:21
geirhaahhughes: If your smb.conf doesn't have a "workgroup = something", the default is WORKGROUP according to "man smb.conf"12:21
yeatscrazyandi86: do you mind if I ask why you would need to do that?12:21
crazyandi86yeats: since i rebooted the last time, my system freezes every time i set my display resolution to "1280x800 + 1920x1080" (dual monitor extended)12:23
wicageirha: 1 more thing, do you know if i change stuff in /usr/share/initramfs-tools/scripts, before creating the squashfs rootfs. it will be pickedup when creating the squashfs rootfs?12:23
Halexander9000Hello? Could someone please tell me that I'm not alone here?12:23
wicaHalexander9000: Hello, you are not alone here12:24
crazyandi86yeats: tried different kernels, but freezing my whole system every time, so i looked into my /var/log/dkpg.log, and the only thing i changed was upgrading from 2:1.11.4-0ubuntu10.2 to 2:1.11.4-0ubuntu10.312:24
Halexander9000Hello wica . You wouldn't know how to handle a mute computer with ubuntu, would you? I need it unmuted. Pretty please?12:26
wicaHalexander9000: do sudo alsamixer12:27
wicaand check if there is nothinh on mute.12:27
yeatscrazyandi86: what model graphics card?12:27
crazyandi86yeats: Intel PRO/Wireless 3945ABG12:28
geirhawica: Sorry, I don't know. I haven't messed around with customizing the livecd myself, nor squashfs.12:28
crazyandi86yeats: sry, wrong line, Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller12:28
Halexander9000wica: What am I supposed to do here. Everything seems normal.12:29
Dr_Willis!sound12:29
ubottuIf you're having problems with sound, click the Volume applet, then Sound Preferences, and check your Volume, Hardware, Input, and Output settings.  If that fails, see https://help.ubuntu.com/community/Sound - https://help.ubuntu.com/community/SoundTroubleshooting - http://alsa.opensrc.org/DmixPlugin - For playing audio files,  see !players and !mp3.12:29
yeatscrazyandi86: you've looked in the xorg logs for error messages?12:29
Dr_WillisHalexander9000:  you using normal speakers? or HDMI audio? or a laptop?12:30
crazyandi86yeats: the problem is, it yust freezes, how can i do that? i don't even get a virtual console12:30
=== xezexal is now known as SolarAquarion
wicageirha: Looking at the scripts. find a check for  /custom-installation/ :)12:30
Halexander9000wica: In alsamixer in the console, there's an Auto-mute column that reads Enabled for some reason. How do I change it?12:30
wicaHalexander9000: m12:31
wicaHalexander9000: pres the m on that channel12:31
Halexander9000Dr_Willis: Do you know how?12:31
yeatscrazyandi86: my approach would be to try and figure out what's actually going wrong rather than getting into trying to downgrade packages (which could render your system unstable)12:31
yeatscrazyandi86: so I would boot into recovery mode and drop to a root console to view the logs with 'less'12:31
Halexander9000wica: What "m"?12:32
wicathe key "m"12:32
crazyandi86yeats: my system is running very well, unless i don't set my resolution to the mentioned "extended monitor"-configuration12:32
crozany conky pros here? i'm getting this error.warning: failed to load external entity "/home/nando/Scripts/weather.xslt"12:33
crozcannot parse /home/nando/Scripts/weather.xslt12:33
heoaWhat was the file to configure apache?12:33
yeatscrazyandi86: ok - so why don't you boot into the less-than-optimal resolution and view the logs from there?12:33
heoahttp://wiki.apache.org/couchdb/Apache_As_a_Reverse_Proxy <-- looking place for this12:33
Cottusglobal configuration files are in /etc12:34
yeatscrazyandi86: you might try 'grep EE /var/log/Xorg.0.log' for starters12:34
Halexander9000wica: I disabled the Auto-Mute, closed AlsaMixer and still nothing.12:34
Guest10901hey12:35
Guest10901how can i   enable mobile broadband  in 12.0412:36
crazyandi86yeats: i didn't think it writes anything there, because i thought the kernel immediately freezes, so doesn't write anything... but im looking for something right in this moment12:36
crazyandi86yeats: and why "grep EE ..."?12:36
yeatscrazyandi86: because any Xorg errors in that log are marked with "EE"12:37
crazyandi86yeats: oic12:38
Dr_Willisas in EEEeeeee! it Crashed!12:38
Dr_Willis;P12:38
yeatsDr_Willis: exactly12:38
Dr_WillisOr more likely Executable Error., or Eronous Error. :) or Extreme Error.12:39
Halexander9000Dr_Willis: But it kept on working ever since I bought it in 2008.12:39
crazyandi86yeats: doesn't grep anything relevant, yust like i thought12:39
Dr_WillisHalexander9000:  Huh?12:39
Halexander9000Why would the sound, of all components, let me down now.12:39
wicaHalexander9000: Then I don't know12:39
Halexander9000You were making fun of my netbook. The ASUS EEE PC I have.12:40
Dr_Willissound used to work on your setup then stopped recently?12:40
=== lenshark is now known as pneftali
yeatscrazyandi86: okay - well your system logs should let you know if this is actually a kernel-level problem - check /var/log/syslog and /var/log/dmesg12:40
crazyandi86yeats: i yust thing it is an xserver-bug, why don't reset the last working version?12:40
Halexander9000It stopped just now.12:40
Dr_WillisHalexander9000:  i was? i dont recall.. I have several netbooks.12:40
Dr_WillisI have seen Soundcards Die. But it could be some other weird issue. Test with a Live cd or other OS to see if sound in fact works..12:40
yeatscrazyandi86: have you searched Ubuntu bugs for something similar to what you're seeing?12:40
wicaHalexander9000: Whate happens when you boot with a livecd?12:40
Halexander9000I was watching something and poof. Everything muted. I may have hit something on my keyboard accidentally, but... I doubt it had any influence.12:40
Halexander9000A what? The EEE PC has no optical bay.12:41
Dr_WillisMost laptops have a fn-FX key to mute things12:41
wicaHalexander9000: USB flash drive12:41
yeatscrazyandi86: in any case, I would continue doing some log forensics before trying something as drastic has downgrading packages - that could become a rabbit hole you don't want to go down12:41
Halexander9000... isn't there any other way?12:41
yeatscrazyandi86: but that's just my advice - others here may have better ideas12:42
Dr_WillisProve its not a Hardware issue..  can save a lot of time.12:42
crazyandi86yeats: yes, but i think the bug is quite new, because the upgrade was from this morning ( 9:00am), and im updating quite regularly12:42
Dr_Willisif a 12.04 live setup sound works. that would point to some update messing with things.12:42
Dr_Willistry an older kernel. see if it works in it. also check the bug reports. it may be a known issue and a fix mey be in the works.12:42
crazyandi86yeats: hm, i just didn't find someone with the same problem, i looked for it for quite a time, before i came here12:44
yeatscrazyandi86: that actually points to it *not* being a bug12:44
yeatsbugs happen to more than just one person12:45
Halexander9000Dr_Willis: In fact... now that you mention it. I plugged my headphones and the sound it working. I unplug then, and the internal speakers don't work.12:45
Halexander9000is working*12:45
OltreIrc`10307ciao12:46
Dr_WillisHalexander9000:  ive seen dozens of variantions on 'internal or headphones - not working when i plyug them in, or both work' type errors.12:46
OltreIrc`10307chi sa dirmi dove trovare la sezzione backtrack12:46
crozany conky pros here?12:46
Dr_Willis!backtrack > OltreIrc`1030712:46
ubottuOltreIrc`10307, please see my private message12:46
Dr_Williscroz:  you could just ask the actual question. ;)12:46
OltreIrc`10307!backtrack12:46
ubottuThere are some Ubuntu derivatives that we cannot provide support for due to repository and software changes. Please consult their websites for more information. Examples: gNewSense (support in #gnewsense), Linux Mint (see !mint), LinuxMCE (support in #linuxmce), CrunchBang (support in #crunchbang), BackTrack (support in #backtrack-linux), Ultimate Edition12:46
mackmoney3000croz, i know just enough to break it12:46
=== yorick_ is now known as yorick
crazyandi86yeats: my theory was, that it is to new to be recognized as one :-)12:47
Halexander9000Dr_Willis: So... what do you suggest?12:47
Dr_WillisHalexander9000:  if plugging in and removeing the headphones messed up the volume.. try removeing them and rebooting and see if it comes back.12:48
OltreIrc`10307#backtrack-it12:48
Dr_WillisHalexander9000:  then see if you can repeate the issue. if so file a bug report12:48
OltreIrc`10307#backtrack-it  no found12:48
crazyandi86yeats: but i mean, i didn't change any configs, or anything, i'm changing the res with the regular tools, and it just breaks my whole system. what is your definition of a bug? :-/12:48
yeatscrazyandi86: in any case, you would need to have log info to report as a bug (which you're welcome to do, btw)12:49
yeatscrazyandi86: I don't think you have enough information to know what it is yet12:49
randy2009Hi, i have a ubuntu server with a high load: load average: 0.95, 1.30, 1.15. But if i look in top i see that the cpu usage is verry little12:49
randy2009what am i missing?12:49
crazyandi86yeats: tried it again, but how can i retrieve log infos, when it immediately dies? a kernel debugger?12:50
randy2009the % iddle is between 50 and 100% on both cpu's12:50
yeatscrazyandi86: the logs don't disappear between reboots, so you should be able to find the errors after rebooting12:50
pooltablehelp missing the pannel that show the programes that are running how do i fix it ?12:51
yeatsrandy2009: which program is at the top of 'top'?12:51
crazyandi86yeats: ok, grepping through my logs a bit longer...12:51
MacroManHow do I redirect stderr as well as stdout?12:51
randy2009apache12:52
wica2>&1 pla12:52
yeatscrazyandi86: you might open the log with 'less' or a text editor to see the messages in sequence12:52
yeatsrather than just grepping12:52
MacroManI doing ./myscript.sh > mylog.log but any errors are still printed to screen12:52
Dr_Willisthey are printing to stderr instead of stdout perhaps.12:52
MacroManDr_Willis: Yes, how do I pipe stderr as well?12:53
randy2009yeats: apache, it's a mercurial server12:53
MacroManSpecifically mysql errors12:53
Dr_WillisMacroMan:  I always forget the syntax some weirdnes seith &2> i recall12:53
yeatsrandy2009: and, depending on the server and its usage, 1.00 or more is not that high of a load average in my experience12:53
Dr_Williswith..12:53
crazyandi86yeats: but i don't exactly know what to look for, so i think grepping makes more sense12:54
Dr_Willishttp://stackoverflow.com/questions/2342826/how-to-pipe-stderr-and-not-stdout12:54
yeatscrazyandi86: suit yourself - I'm just suggesting what has worked for me in the past ;-)12:54
randy2009ok, the users experience is that the site is slow, so i'm trying to figure out what can cause it12:54
Dr_Williscommand 2>&1 >/dev/null12:54
yeatsrandy2009: apache logs look okay?12:54
randy2009much 401's12:54
randy2009so thinking of giving the vm 4 instead of 2 vcpu's12:55
crazyandi86yeats: didn't mean it that way, thanks for the tip, i just didn't want to search my whole syslog+dmesg manually12:55
MacroManDr_Willis: Ah found it 2>&112:55
Dr_WillisMacroMan: other tips and tricks http://stackoverflow.com/questions/2342826/how-to-pipe-stderr-and-not-stdout12:56
yeatsrandy2009: how much RAM?12:56
MacroManDr_Willis: Cool, thanks12:56
MacroManwica: Just noticed that you answered my question, but I didn't realise it was directed at me. Thanks all the same.12:57
randy2009yeats: 4gb12:57
randy2009used 3,4, cached 2,4 so no need for memory expansion?12:58
yeatsrandy2009: yeah - I think adding CPUs might help, but I would troubleshoot those 401 errors if they are unexpected12:58
=== willow is now known as Guest34741
yandex832Has anyone succesfully run Skyrim on Ubuntu?13:06
=== invisiblek_ is now known as invisiblek
|Long|hi, have anyone here used kvirc apps? where to set blowfish?13:07
Saikiwhere can I find this file?: libstdc++.so.513:15
Dr_Willisyou mean on your system? or in the package maanger to install Saiki ?13:16
Dr_Willis!find libstdc++13:17
ubottuFound: libstdc++6, libstdc++6-4.4-dbg, libstdc++6-4.4-dev, libstdc++6-4.4-doc, libstdc++6-4.4-pic, libstdc++6-4.5-dbg, libstdc++6-4.5-dev, libstdc++6-4.5-doc, libstdc++6-4.6-dbg, libstdc++6-4.6-dev (and 24 others) http://packages.ubuntu.com/search?keywords=libstdc%2B%2B&searchon=names&suite=precise&section=all13:17
lukasz_ 778813:17
SaikiDr_Willis: to install13:17
Dr_Willislibstdc++5 - The GNU Standard C++ Library v313:18
Dr_Willisseems  posibly :)13:18
Dr_Williswillis@Speedbuntu:~$ apt-cache search libstdc++ | grep 513:18
Dr_Willisnot sure why  apt-cache search libstdc++5   dident show it.13:19
SaikiDr_Willis: thanks :)13:19
Dr_Willismost be somthing with the ++ perhaps.. nothing like libstdc++6 seems to work either.13:20
elspuddydose the 12.04 dvd have both x64 and x86 ?13:23
geobilayes13:23
geobilaas in versions13:23
elspuddythanks13:23
geobilanot included both in the same dvd13:23
fidelhttp://cdimage.ubuntu.com/releases/12.04/release/13:23
DJoneselspuddy: the dvd's are either 64 or 32 bit versions, the difference to the live cd is that they include additional language packs13:24
elspuddyright, so i can install that on my 1u server and it will have the x64 version on it13:25
ldiamondcan I mount / with noatime options by just adding the line in fstab? Or is / different because it's already mounted when reading /etc/fstab?13:26
Cottuson boot time fstab is consulted13:27
Cottus / is mounted according to fstab13:28
ldiamondtx13:30
ldiamondthx13:30
SaikiDr_Willis: ok one more question, how can I search for a string inside files in a directory?13:31
Dr_WillisSaiki:  grep command searches text files for patterns13:31
jonas108t13:31
=== jonasfj is now known as Guest9125
SaikiDr_Willis: so I could "grep /etc  version" ?13:34
=== jonas108 is now known as jonasfj
SaikiDr_Willis: sand does it check subdirectories?13:35
torvaldsFanHello , I've 2 problems with ubuntu 12.04 . 1) It got hanged twice without any warning or error. 2) THe bluetooth sometimes remains on by default on startup. ANy solutions ?13:36
=== aeth|ZzZz is now known as aethero
icementholshi everyone13:42
icementholsanyone know if there is a bug with 12.04 unity workspaces? i have four selected but i cant seem to access the bottom two using keyboard, i have to click with mouse to access them ? anyone ?13:43
=== testBOT is now known as Guest63404
revol0xfSaiki, try -R for recursive search. You will get all the information about grep in the man page.13:47
blinkizHello everyone!13:48
AdvoWorkDr_Willis, are you around?13:49
LoboXcl13:49
=== Myr is now known as Myr|Away
[flux]How do I recursively get the permissions of all folders and files in a directory?13:52
[flux]ls -l?13:52
AdvoWorkurgh, i can do: wine ......dreamweaver.exe in terminal and it loads fine. if i do a launcher via terminal it works fine, if i do it via application, nothing happens. I made a script, just doing wine .....dreamweaver.exe and i try and run that via the application loader, but again, nothing loads. Any suggestions please?13:52
sipior[flux]: close: "ls -lR"13:53
MonkeyDustAdvoWork  what I do: windows in virtualbox, install dreamweaver there13:53
AdvoWorkMonkeyDust, it took me absolutely ages to get dreamweaver working anyway, im almost scared to remove it and try it in anything else lol, what version did you get working?13:53
MonkeyDustAdvoWork  ancient archaelogy: dreamweaver MX, 2004 or so :p13:54
Dr_Willishmm?13:54
AdvoWorksame lol13:54
[flux]thanks, sipior13:54
[flux](was using ls -lr)13:55
AdvoWorkDr_Willis, i tried that thing you mentioned earlier, even with wine "whatyever &" and same it just doesnt load13:55
Dr_WillisAdvoWork:  wine whatever.exe & dosent work either?13:55
FreeNslavedanyone up to helping.....12.4  cant get video to play...installed 3rd party software flash and VLC on 32 bit older system...not working playing video.  worked fine under  xubuntu 1113:56
AdvoWorkDr_Willis, no, even tried cd "location of file"  then wine file &   it runs if i run the script in terminal, but not from the menu :S13:57
fidelFreeNslaved: video or flash?13:57
fidelFreeNslaved: sure you got a working gfx-driver in use?13:58
FreeNslavednot sure...how do i check?13:58
whiskers_I'm trying to run uwsgi as a daemon on 12.04, whenever I do "sudo service uwsgi restart" it claims to have restarted "OK" but I see nothing in the /var/log/uwsgi.log and my configured Flask app doesn't work. Any ideas where to look for further clues?13:58
geirhaAdvoWork: Have you checked ~/.xsession-errors for clues?13:58
whiskers_I'm at a bit of a loss now, I've not bee using uwsgi for long so I don't know if there is some subtley I'm missing (however I managed to get this to work on a server over the weekend)13:59
solocommandMornin folks. I'm running oneric; is it possible to install a package from precise or natty? Or is that a worse idea than compiling/src install?13:59
Dr_Willis!backports | solocommand13:59
ubottusolocommand: If new updated Ubuntu packages are built for an application, then they may go into Ubuntu Backports. See https://help.ubuntu.com/community/UbuntuBackports - See also !packaging13:59
gre_nouillehey MonkeyDust ! it was the ssh "-T" option :)13:59
Dr_Willissolocommand:  best would bve find it in 'backports' then perhaps look for ppa's - then source.14:00
fidelsolocommand: you shouldnt do that - there is a reason a package is available in 1 version and not in the other14:00
FreeNslavedfidel.... is it easy to check to see if I have it loaded....i am clueless about commands at the terminal but understand how to enter them14:00
solocommandfidel: The version of the package available in oneric is incompatible with other software, so I need a different version. Preferably without changing the OS :)14:01
solocommandThanks for the info though, folks. I'll check out backports14:01
fidelsolocommand: backports or ppa then i guess14:01
Newhey guys how are you all? when i boot into ubuntu using the windows installer i get a blank screen. i am using the correct Bit version. Any suggestions to get it running properly?14:01
FreeNslavedfidel   would it be    sudo apt-get gfx-driver     at the terminal?14:01
fidelFreeNslaved: i cant guess what driver you would need as you have afaik not even mentioned your gfx-device or similar14:02
fidelFreeNslaved: i was willing to point  you into a direction - that direction is mentioning the ubuntu- version - used hardware - what you tried so far - and what the current issue is. forward those infos to the channel and hope someone is willing to help14:03
=== Cottus is now known as o0o0
FreeNslavedty14:03
ZZhey guys. i loaded YLMF linux14:04
Dr_WillisZZ:  so you should be using the YLMF support channels.. since its not UBuntu.14:04
Newi downloaded the new ubuntu 12.04 from ubuntus website, my hardware is basic, single core, 2gigs of ram. 2.2 ghz. i still believe it should boot properly. whats odd is as i shut windows down at the blank screen i saw a flash of the operations system which let me to believe its a possible bios issue14:05
ZZits  based on ubuntu. im new to it. just found this app pre installed14:05
Dr_WillisZZ:  theres lots of disrtos based on ubuntu.. they have their own support.14:06
fidelZZ: still this channel focused on ubuntu itself and not distris based around it14:06
FreeNslaved<--downloaded 12.4  32 bit iso and have yet had  it install on 3 older systems properly14:06
ZZoh ok cool :)14:06
Dr_WillisNew:  you did a normal install? or are you using Wubi?14:06
ZZcello u from ZA?14:07
NewDr_Willis: i used the windows installer and the ubuntu iso from ubuntu's website14:07
Dr_WillisNew:  so thats a 'wubi' install then.14:07
subz3r0wubi = windows installer14:08
subz3r0wubi = Crap14:08
Newnotice the word new lol14:08
Newmy name was new to ubuntu but it cut off14:08
Newtoo many characters. i didnt realize14:09
IdleOnesubz3r0: no need for the joke comments. Please keep it support related.14:09
SaikiNew:That's cause youcan't use spaces14:09
Dr_Willisyou dont use spaces in nicn names either.14:09
Newah i see14:09
soraahi14:09
subz3r0IdleOne, well maybe its OT: but fact is wubi is useless like a third leg...14:09
soraai have problems startin dhcp server14:09
soraaCan't create PID file /var/run/dhcpd.pid: Permission denied14:09
soraaand i'm root14:09
Saikisubz3r0: speak for yourself. don't make swweping statements14:10
NewSo do i just burn the iso and boot into that from the Bios?14:10
Saikimornin IdleOne btw lol14:10
SaikiNew: burn the iso and run it at bios startup, yes14:11
subz3r0Saiki, so? Im talking for myself... imo wubi is kinda useless... that's it. any1 can share this view or not. i dont care..14:11
Saikisubz3r0: it's counterproductive to this environment14:11
subz3r0like wubi... but well. ok...14:12
Silencehow do i arrange the order of the applets on the top horizontal panel in unity in 12.04?14:12
=== jglauche__ is now known as jglauche
IdleOnesubz3r0: My point was that it is off topic but also was not helpful. If you don't know the answer to an issue that is fine, don't distract the user needing help with unhelpful comments please.14:12
subz3r0you're welcome14:12
FreeNslavedfidel...i installed 12.04 Xu on this 32 bit system about 5 years old...using on board video ...from an MCI motherboard...on board video chip14:13
NewI just confirmed i do not have and blank cds/dvds. my luck haha. is there any alternate method? Possible a VM ware file?14:13
tempplease why is it so necessary to unmount a portable disk before formatting it in ubuntu14:13
Dr_Willistemp:   so you dont confuse the system14:14
MonkeyDusttemp  because you cant modify a mounted disk14:14
bitsmixanybody know why there is always a gpg key error?   the key:  40976EAF437D05B514:14
tempDr_Willis: thanks14:15
tempMonkeyDust: thanks14:15
fidelbitsmix: are you using some ppas? is the error entry related to one of those ppas?14:15
MonkeyDusttemp  you cant repair a car engine while you're driving, that's the idea (more or less)14:15
tempMonkeyDust: lol!; sure!, got it14:16
NewIs ubuntus browsing more private/secure?14:16
fidelNew: compared to what in the first place?14:17
BluesKajNew, in what manner ,viruses ?14:17
bitsmixfidel:  there is no `ppa` in my source list. it's just-installed ubuntu 12.04 server. ;(14:17
MonkeyDustNew  linux is more secure when it comes to malware, it's browser independent14:17
fidelbitsmix: it just was an idea - i havent seen you posting a source.lisr thats why i came to the guess14:17
FreeNslavedNew you may like www.duckduckgo.com14:17
Newi use that daily FreeNslaved14:18
FreeNslaved:O)14:18
MonkeyDustNew  https://duckduckgo.com/privacy.html14:18
NewVirus free is always great :)14:18
Newi use https as well14:18
josvukHello, my python path is somewhat destroyed after runnign apt-get hwo to fix it?14:18
fidelbitsmix: check if you can reproduce that with another default mirror14:18
bitsmixfidel:  my source list:  http://pastebin.com/BiZ5SCy814:18
bitsmixfidel: besides, there is nothing in the "/etc/apt/source.list.d/"14:19
goglihow to un-install Document Viewer ?14:19
fidelbitsmix: ok - as i told you above - it was just an idea ;)14:19
ajkdsjaWTH? iptalbes doesnt accept ACCEPT argument ?14:19
fidelmy next step would be replacing mirrors and trying to reproduce the error with those modified sources14:19
ajkdsjaiptables -A INPUT -i lo -d $LOOP -j ACCEPT14:20
bitsmixfidel:  well, thx any way14:20
ajkdsjaBad argument `ACCEPT'14:20
fidelbitsmix: if that still throws errors - its getting interesting14:20
MonkeyDustgogli  there's apt-get purge14:20
=== lubmil is now known as lub`
IdleOneajkdsja: try ALLOW14:20
bitsmixfidel:  just search " 40976EAF437D05B5 "14:20
IdleOneajkdsja: I have no experience with iptables btw14:20
ajkdsjaBad argument `ALLOW'14:21
fidelbitsmix: to achive what?14:21
ajkdsjahahahahah14:21
bitsmixfidel: you will see, there are a lot of problems..14:21
=== Wayfarer is now known as Guest30110
fidelbitsmix: i dont know why i should - it works here and on all other 12.0.4 boxes i am using. have you done the mirror-change test?14:22
bitsmixfidel: what's the mirror-change test?14:23
dinkoHi!14:23
fidelbitsmix: the thing i mentioned already 2 times and you havent replied so far ;)14:23
fidelanyways - im off - gl14:23
FreeNslavedthanks fidel14:24
IdleOnebitsmix: sudo apt-key adv --recv-keys --keyserver keyserver.ubuntu.com 437D05B514:27
bitsmixfidel: sorry, i changed another source, and the problem solved. thank you very much.14:27
=== crazyrohila is now known as crazyrohila-afk
bitsmixIdleOne: I've executed this more than, let's say, ten times, but not work..14:27
AdvoWorkgeirha, the only error I get is, too many open files ulimit -n probably needs to be increased, but i dont know if thats due to wine or something else, but as i say, it opens in terminal :S14:29
KeverwHey. Is it possible to slim down ubuntu? It seems to go really slow in my 512mb VM, 1024 mb is way better. I really just need to run 1 little app on it. Not sure if I can like strip it down or something.14:29
Balasksure14:30
BalaskGo to the dash home and press alt14:30
Balasksearch for System Monitor14:30
Keverwand it froze while updating and now it fails to update or install stuff in the Ubtunu Software center… I guess I should reinstall it now that I bumped up the ram?14:30
Balaskgo to processes14:30
geirhaAdvoWork: Hm. Odd indeed.14:30
Balaskinside there you can see what's running you can kill what you don't want running and then change what starts up or what is installed14:31
zykotick9Keverw: you could start from the mini iso and only install what you need.  see "/msg ubottu mini" for some more details.14:31
Keverwoh cool. Will check that out14:33
AdvoWorkgeirha, any suggestions, I cant work this out :S14:34
RoukoHello I am new here14:34
BalaskHello so am I14:34
AdvoWorkHow can I change ulimit ? its 1024 at the moment, isn't it depreceated?14:36
MonkeyDust!find ulimit14:37
ubottuFound: cpulimit14:37
geirhaAdvoWork: Put ''set -x'' at the start of the script, and see if the xtrace output (which will end up in ~/.xsession-errors) give any clues14:38
geirhaAdvoWork: help ulimit14:38
KeverwWhat's the fastest desktop? Gnome, Xfce, Unity?14:39
KeverwXfce looks really cool. One of my friends said he likes it. Not sure what distro he's running but I assume I can swap out Unity for Xfce.14:40
riktkingKeverw: id say from those xfce14:40
riktkingbut there are even lighter14:40
genii-aroundLXDE14:40
Dubahcocan i lower the cpu usage by using ubuntu in text mode?14:41
riktkinghttp://www.techdrivein.com/2011/05/top-4-lightweight-official-ubuntu-based.html14:41
riktkinglubuntu and xubuntu are quite light14:41
RoukoI think that fluxbox is the  fastest desktop14:41
BlouBlouDubahco: yes, just open a tty14:41
riktkingflux is v light14:41
DubahcoBlouBlou: tty?14:42
AdvoWorkgeirha, i think ive spotted the problem, in terminal to run dreamweaver i have todo: wine "/home/user/.wine/drive_c/program files/adobe/adobe dreamweaver cs4/dreamweaver.exe"  the error shows: wine cannot find L"C:\\Program Files\\Adobe\\Adobe Dreamweaver CS4\Dreamweaver.exe :S  any ideas about that?14:42
genii-aroundriktking: Hard to take that page seriously as it considers Kubuntu to be a lightweight desktop14:42
BlouBlouDubahco: control + alt + 2   >> to exit from tty: control + alt + 714:42
riktkinggenii-around: i getcha14:42
BlouBlouyou can use 2, 3, 4... there're few tty14:42
zykotick9BlouBlou: F1-F6, not 1-614:43
BlouBlouoh yeah right zykotick9 :P14:43
riktkingit could be lighter than unity to14:44
geirhaAdvoWork: That's the exact line you put in your script?14:44
riktkingas in unity 3D14:44
john__is there anybody speaking chinese?14:44
DJones!cn | john__14:44
ubottujohn__: 如欲獲得中文的協助,請輸入 /join #ubuntu-cn 或 /join #ubuntu-tw14:44
BlouBlouDubahco: well, what zykotick9 said, control + alt + F214:44
BlouBlouDubahco: if you want to exit from tty, use control + alt + F714:44
AdvoWorkgeirha, yeah wine "/home/user/.wine/drive_c/program files/adobe/adobe dreamweaver cs4/dreamweaver.exe" works in terminal14:45
Dualityhi14:46
zykotick9BlouBlou: fyi once you are in a VT you don't need ctrl - so just alt+f7 brings you back to gui (you can also use alt+LorRArrow to switch between VTs) ctrl is only needed in Xorg14:46
Dualityi got the option in bios to make from a dual core cpu a single core (just make one availble disable the other) would this help save power under ubuntu ?14:47
geirhaAdvoWork: Should work just as fine from ascript. Very odd.14:47
o0o0!laptopmodetools14:47
o0o0Duality, check laptop-mode-tools in synnaptic14:47
o0o0!powersave14:48
AdvoWorkgeirha, its like its looking in a different directory :S14:48
Dualityo0o0, i had jupiter installed laptop-mode-tools just removed it ...14:48
RoukoIs it anybody her who can explain for me how i edit the name of my user in the terminal? I am not so godd on english but i hope anny person can understand what am saying.14:49
o0o0!jupiter14:49
Dualityo0o0, are you trying to talk to a bot :)?14:49
zykotick9!msgthebot | o0o014:49
ubottuo0o0: Please investigate with me only with "/msg ubottu Bot" or in #ubuntu-bots.  Search for factoids with "/msg ubottu !search factoid".14:49
geirhaAdvoWork: Try specifying WINEPREFIX explicitly.  export "WINEPREFIX=$HOME/.wine";14:50
o0o0heh,14:50
o0o0!cmon14:50
o0o0:D14:50
AdvoWorkgeirha, in the actual script itself? ie wine ...... export ... ?14:50
rattatoueIs there a channel on here or can I ask in here. For people running 3.5 kernel right now on Ubuntu?14:50
geirhaAdvoWork: Yes, but export WINEPREFIX="$HOME/.wine"; wine "$HOME/.wine/drive_c..."14:50
arch_is_awesomeGood day14:51
* arch_is_awesome is bored14:52
ajkdsjahi14:52
thomasprAnyone in the mod to help me analyze my wireless connection 802.11 ?14:53
ajkdsjaim tring to make a AP using airbase-ng because network manager way creates an ad-hoc AP14:53
ajkdsjaand my devices are not capable with adhoc14:53
ajkdsjabuy when i try to connect it says Obtaining IP and never ends14:54
ajkdsjai have There's already a DHCP server running.14:54
AdvoWorkgeirha, like in runme.sh export WINEPREFIX="$HOME/.wine"; wine "$HOME/.wine/drive_c/Program Files/Adobe/Adobe Dreamweaver CS4/Dreamweaver.exe" ?14:56
ajkdsjai'm trying  to make hotspot out of my wifi adapter while it is connected itself to another hotspot.14:57
ajkdsjaany ideas14:57
KeverwLike a mesh net kinda?14:58
New_To_Ubuntuit seems like its a graphical error when i try to boot up. i get things going and i can barely see anything14:58
OerHeksajkdsja, not possible to connect to a hotspot and provide a hotspot with the same wifi adapter.14:58
=== ryan_ is now known as thrn
ajkdsjaOerHeks: yes it is14:59
OerHeksajkdsja, you need a 2nd wifi adapter to do so14:59
ajkdsjaOerHeks: windows does14:59
thomasprfrank__: Gibts hier 802.11 Spezis ?14:59
ajkdsjaando airbase-ng too14:59
ajkdsjabut dhcp is not working14:59
ajkdsjamaybe i should do this on Windows and forget this on Ubuntu15:00
MonkeyDustajkdsja  type !brainstorm15:01
ajkdsja!brainstorm15:01
ubottuPost your ideas for Ubuntu at http://brainstorm.ubuntu.com and vote for the ones you like!15:01
ajkdsja:facepalm: I did it with Debian15:02
r0ckm4n21-w15:04
OctubreCatalunya triunfant, tornarà a ser rica i plena15:04
MonkeyDust!it15:04
ubottuVai su #ubuntu-it se vuoi parlare in italiano, in questo canale usiamo solo l'inglese. Grazie! (per entrare, scrivi « /join #ubuntu-it » senza virgolette)15:04
genii-aroundMonkeyDust: I think the .es in their hostmask indicates not italian but spanish15:05
=== testBOT is now known as Guest19244
OctubreQue tremooli l'enemic!!!15:05
MonkeyDustgenii-around  wrong factoid then :p15:06
OctubreQuan convé seguem cadenes!15:06
BluesKajlooks pretty french to me15:06
MonkeyDustit's not spanish either15:06
BluesKajthere's the spanish15:06
BluesKaj\portugese15:06
Pumpkin-it is Catalan15:06
genii-aroundPumpkin-: Aaaah15:07
BluesKaj!ca15:07
ubottuCanadian Ubuntu users can be found in #ubuntu-ca aussi #ubuntu-qc15:07
OctubreAra és hora segadors, ara és hora d'estar alerta! per quan vingui un altre juny esmolem ben bé les eines. Bon cop de falç!15:07
* genii-around smacks BluesKaj15:07
genii-aroundBluesKaj: Now they know where to find us!15:07
BluesKajhehe ....never find ca as canadian anywhere else15:07
MonkeyDust!en| Octubre15:07
ubottuOctubre: Certain Ubuntu IRC channels are English only.  For a complete list of channels in other languages, please visit https://wiki.ubuntu.com/IRC/ChannelList15:07
myk_robinsonmorning, all.. Looking for recommendations for a lan mapping tool for ubuntu. There used to be a package called lanmap that would do exactly what I'm looking for and create an image showing what is detected on the local area network15:07
IdleOneBluesKaj: other languages besides French use accents15:07
IdleOne!bt | Octubre15:07
Octubresorry MonkeyDust thanks15:08
IdleOne!br | Octubre15:08
ubottuOctubre: Por favor, use #ubuntu-br para ajuda em português. Para entrar no canal por favor faça "/join #ubuntu-br" sem as aspas. Para a comunidade local portuguêsa, use #ubuntu-pt. Obrigado.15:08
aneesh_hi15:08
BluesKajidle oh , prbly ,, I know swedish and spanish do , I'm sure lots of other languages use accents15:08
BluesKajIdleOne, ^15:08
MonkeyDusti just read, my first name is the most difficult to prunounce in the whole of Europe :p </offtopic>15:09
BluesKajlotta monkeys in here today :)15:10
thomasprbergwacht-rohren.de15:12
thomasprAnyone in the mod to guide me analyse my  802.11 ?15:13
compdocwireless?15:14
thomasprcompdoc: Sorry - yes15:15
thomasprIsn't 11 always wireless ?15:15
drag0niusguys, when i run something on startup in Ubuntu Server, how do i take it to the background?15:15
drag0niusso it takes me to login, not startup program's console15:16
thomasprAnyone in the mod to help me analyze my wireless 802.11 ?15:18
=== MartinS is now known as Guest38477
drag0niuslol, alt + f4 works in ubuntu server's console15:20
thomasprAnyone in the mood/mode/mod to help me analyze my wireless 802.11 ?15:20
IdleOne!repeat | thomaspr15:20
ubottuthomaspr: Don't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. While you wait, try searching https://help.ubuntu.com or http://ubuntuforums.org or http://askubuntu.com/15:20
johnhello15:20
johnis there any chinese?15:21
MonkeyDust!cn15:21
ubottu如欲獲得中文的協助,請輸入 /join #ubuntu-cn 或 /join #ubuntu-tw15:21
johni love ubuntu15:21
bazhangjohn #ubuntu-cn15:21
johnubuntu15:21
drag0niusHWaddr is MAC in ifconfig?15:21
genii-arounddrag0nius: Yes15:22
thomasprHardware-Adresses should always be named MAC-Adresses vice versa15:23
Asad2005When i do upgrade the third party sources is disabled by update manager, will they be enabled back after the upgrade and what will happen to the software installed from these sources15:29
AdvoWorkany ideas how I can even load winecfg? it wont open visually or via terminal, says maxclientsreached15:29
|Long|hi, have anyone here used kvirc apps? where to set blowfish?15:30
compdocif the software is working after the upgrade to the OS, you can use it that way, or upgrade it seperately later15:30
o0o0AdvoWork, relogin or15:30
o0o0AdvoWork, kill all services : wine-server  explorer.exe ..15:30
AdvoWorko0o0, i did a reboot and it didn't make a difference :S15:31
o0o0oho15:31
o0o0i mean oh15:31
|Long|eisio-, thanks15:31
drag0niushow can i distinguish 1gbit card from 100mb net card with ubuntu server?15:38
drag0niuscli15:38
jalalhey guys i custmize ubuntu but after splash screen ubuntu doesnot botting15:38
jalalplzz posible help15:39
bazhangjalal, customized how15:40
jalali customized from ubuntu builder15:40
jalali install new tools15:41
jalaletc15:41
jalali did not played with kernal etc15:41
jalali change splash screen15:41
jalaletc15:41
jalalbut at spalsh screen system hanged15:41
jalaland can not boot futhure15:41
bazhangjalal, please  be very clear, and on one line.15:41
jalalok15:41
myersghey can some one go here so see if its working? its my server with owncloud on it: mgh2server.tk/owncloud15:42
=== fire is now known as songisgood
jalali customize my ubuntu 12.04 with ubuntu builder tool.i install new application like skype etc,i change spalsh screen and wallpaper etc..i make live cd and i try to boot .but at splash screen system hanged and do not go ahead15:43
bazhangjalal, the ubuntu customization kit? something else? what is the ubuntu builder15:43
jalalno .it ubuntu-builder15:44
myersgI know what it is15:44
myersgUbuntu builder15:44
jalalit also custmization tool which let you install deb pakage and give many more to do,also chroot console15:44
myersgubuntu builder 2.1.115:44
myersgya15:44
jalalwhen first live cd i make that work but this one does not15:44
myersgdid you remake it?15:45
=== vincent is now known as Guest404
=== Guest404 is now known as idefix
=== wainersm is now known as wainersm_lunch
jalalposible help plzzzzzzzzzzzzzzzzzzz15:47
bazhangjalal, this ubuntu builder is from google code15:47
jalalyessss15:47
bazhangjalal, so contact them15:47
jalalbefore i make livcd that works but this one does not15:48
bazhangjalal, its 3rd party software, contact the makers15:48
jalalok15:48
jalalduring custmization i open root login promp .is this can be cause of that?15:49
jalali edit lightdm.conf file15:49
phil_physdear friends could u advice me a channel about C programming language?15:51
LjLphil_phys: weren't you already told ##c ?15:51
bazhangphil_phys, ##c ?15:51
phil_physit's not the channel of C15:51
LjLyes it is15:51
phil_phystry15:51
LjLi have. i am on it. have been for months.15:52
phil_physhave u tried?15:53
phil_physi cannot get in15:53
IdleOne!register | phil_phys15:54
ubottuphil_phys: Information about registering your nickname: https://help.ubuntu.com/community/InternetRelayChat/Registration - Type « /nick <nickname> » to select your nickname. Registration help available by typing /join #freenode15:54
phil_physhow can u do to log in?15:56
IdleOnephil_phys: read the info ubottu just gave you it explains how.15:58
bazhangphil_phys, #freenode for further help please15:58
phil_physok15:58
=== anonymous is now known as Guest10642
tablesdoes anyone have drupal installed on ubuntu?16:02
drag0niushmm what NIC orange led usually means?16:02
drag0niusi disabled NIC in bios but led is still on16:03
daoneunvWhat are some compatible ubuntu compositors?16:06
phil_physI completed the regitration thanks16:06
phil_physnow i can get in C##16:06
drag0niushow can i use networking on ubuntu server when integrated NIC is broken?16:07
drag0niusit fails at waiting for net configuration16:07
daoneunvDidn't gnome 3 remove all compiz support with?16:07
drag0niuseven tho i tried plugging lan cable to different working cards16:08
Nihatslm16:08
Nihattürkçe bilen varmı acep16:08
NihatBana yardımcı olabilecek bir arkadaş arıyorum16:09
NihatLinux Ubuntu hakkında16:09
genii-arounddrag0nius: If you have been swapping out a bunch of networking cards in the same box, you may want to clear out the contents of /etc/udev/rules.d/70-persistent-net.rules16:10
ikoniaNihat: hello16:10
Nihatmrb16:10
Nihathello16:10
Nihatikonia16:10
ikoniaNihat: what language do you speak ?16:10
LjL!tr | Nihat16:11
ubottuNihat: Turk ubuntu kullanıcıları, Türkçe yardım ya da geyik için /join #ubuntu-tr hizmetinizde.16:11
Nihatubottu16:11
ikoniaLjL: too quick for me16:11
Nihattürkçe biliyomusun16:11
drag0niushow do i interrupt that network config so i dont have to wait ~3 min each time i boot? ;/16:12
NihatBana yardımcı olabilecek bir arkadaş arıyorum16:13
NihatBana yardımcı olabilecek bir arkadaş arıyorum16:13
daoneunvdrag0nius: You can write a script.16:13
drag0niusisnt there some run-time hotkey like ctrl + d after logging in?16:13
daoneunvdrag0nius: Linux has 5 run stages.. Run stage 3 being CMD LINE + Networking. 5 GUI + Networking.16:13
daoneunvYou can run scripts at these stages.16:14
jalalmy ubunut 12.04 stop at splash screen16:14
jalalpossible help plzzzzzzzzzzz16:14
daoneunvSuch as ip link set eth0 down for example.16:14
dj_segfaultdaoneunv: How do you run a script when you enter  a certain runlevel?16:14
daoneunvNot saying that is correct though.. You'll have to do an iwconfig.16:15
LjLNihat: Turkish in #ubuntu-tr - Only English in #ubuntu16:15
daoneunvhttp://manpages.ubuntu.com/manpages/dapper/man5/runlevel.conf.5.html16:15
Nihatok16:16
Nihatthanks16:16
bazhangjalal, thats from google code. contact them16:16
kayaguys need to how does the guest user in ubuntu 11.10 lost ma copied  files after restarting16:16
jalalbrother it not problem in ubunt builder...i did google.people face this problem in actual ubuntu 12.0416:16
kayaguys need to how does the guest user in ubuntu 11.10 lost ma copied  files after restarting16:16
jalalspalsh screen freez16:16
daoneunvI just installed Ubuntu.. I know nothing about it.16:16
daoneunvI'm comming from Arch Linux though.. I'm only testing this distro for a bit.16:17
jalali used ubuntu-builder many times16:17
bazhangjalal, you are using google code ubuntu builder. it freezes.16:17
jalalit not that from ubuntu-builder16:17
jalalit  problem in booting16:17
bazhangjalal, so what is it from16:17
jalali cusmtmize backtrack 5 using builder16:17
jalalit working fine,problem coming in 12.0416:17
kayaguys need to how does the guest user in ubuntu 11.10 lost ma copied  files after restarting16:18
jalali install plymouth them for pslash16:18
jalaland i install gnome-panel too16:18
dj_segfaultdaoneunv: that man page was from Dapper, which was a VERY long time ago.  Is that still valid?16:19
drag0niusgenii-around: ty, clearing those rules helped16:19
CaifasHello guys, is there a way to fix "sudo: >>> /etc/sudoers: syntax error near line 21 <<< / sudo: parse error in /etc/sudoers near line 21 / sudo: no valid sudoers sources found, quitting / sudo: unable to initialize policy plugin" without reboot the machine? I dont have physical access to it16:19
botcityhow do you remount a usb disk?16:19
kayaguys need to how does the guest user in ubuntu 11.10 lost ma copied  files after restarting16:19
genii-arounddrag0nius: You're welcome16:19
drag0niuswhat tools would i need to use to setup PPPoA connection (with modem as bridge connected to NIC1) and set up DHCP server on NIC2?16:21
daoneunvdj_segfault: Like I said. I'm not an Ubuntu user. I take it if it were to change it wouldn't be to far off.16:22
daoneunvdj_segfault: That's basic functuioanlity of a Linux system.16:22
mtrd`Hello! I've updated xubuntu to 12.04, and i get crash report all the time from : /usr/bin/blueman-applet. Any idea how i could fix that ?16:22
=== The is now known as Guest27939
botcitykaya: I am guessing but i would assume that if you do not have a log in account. you can not save files on the system.16:23
DaDaDOSPromptmtrd, have you any clue what that applet is?16:24
DaDaDOSPromptit might be a desktop widget, judging by the name16:25
DaDaDOSPromptit's the tray applet for managing bluetooth16:25
DaDaDOSPromptare you running that mtrd` ?16:25
DaDaDOSPromptif so, I guess you'd want to eliminate the use of that applet; granted, of course, it'll also disable easy desktop bluetooth connections16:26
mtrd`i'm not  _really_ running it, it's automatic16:26
mtrd`i'm not using bluetooth but i wanted to know if it's a common problem16:26
=== Guest9663 is now known as Dorito
drag0niusi installed dhcp3-server, but i config files all tutorials are talking about arent here16:29
AdvoWorkyou know running a command in terminal, can i somehow do that but hide the terminal? so its running in the background?16:30
=== crazyrohila-afk is now known as crazyrohila
genii-aroundAdvoWork: command &16:30
drag0niusAdvoWork: put & at the end of command, then you can bring back to foreground with "fg <num>"16:30
Zally666Hide command.sh16:30
genii-around( Well, the & will background the process but not actually hide the console/terminal )16:31
Eraindilhello I need help16:31
Eraindilabout an access permission16:31
Eraindilon an ubuntu server16:31
Eraindilthe user can't read root pid in /proc16:32
=== anonymous is now known as Guest8134
tableshow do i fully remove a package and all it's contents, including configs, etc.16:35
tables?16:35
drag0niusthere was purge modifier on apt-get or something like that16:36
Adam_hey guys i'm trying to boot an ubuntu cd on an xp laptop and when i get the the ubuntu menu i press enter on Install Ubuntu and then i get this code like Trace Call: etc. Code: etc. and the random letters like a3 45 i9 91 etc.16:36
Eraindilhow can I allow a user to read root process in /proc16:36
Adam_i need help please16:36
=== macro is now known as Guest53308
bazhangpurge is identical to remove except that packages are removed and  purged (any configuration files are deleted too). http://manpages.ubuntu.com/manpages/precise/man8/apt-get.8.html tables16:36
Guest53308hi16:37
Adam_can anyone help me?16:37
bazhangAdam_, md5 the iso yet?16:37
bazhang!md5 | Adam_16:37
=== spacebug is now known as spacebug-
ubottuAdam_: To verify your Ubuntu ISO image (or other files for which an MD5 checksum is provided), see http://help.ubuntu.com/community/HowToMD5SUM or http://www.linuxquestions.org/linux/answers/LQ_ISO/Checking_the_md5sum_in_Windows16:37
tobe_Can someone help me please? Im in ubuntu 12.04 and i cant install gimp 2.8 (ive followed the tutorials) It only does gimp 2.6 even when i follow the instructions16:37
Adam_? what?16:37
Adam_i have the iso installed on the cd rom16:37
bazhangAdam_, read the link16:37
drag0niuswhere to put dhcp config? it's kinda like every tutorial tells different path16:37
bazhangtobe_, gimp from the PPA?16:38
tobe_bazhang:  i add the ppa and did that16:38
Adam_what does that do?16:38
Huntinheadswhat does what do?16:39
bazhangtobe_, how did you add the ppa, and follwing that did you update the package lists16:39
bazhangAdam_, md5 the iso, read the link16:39
bazhang+o16:39
tobe_i did the add-apt-repos and also i did it through the synaptic16:39
bazhangtobe_, then you updated the package list?16:40
tobe_bazhang: i did the add-apt-repos and also i did it through the synaptic16:40
tobe_yes16:40
bazhangtobe_, and what was the error?16:40
Adam_thanks!!16:40
tobe_no error. it installs 2.616:40
Datastream111Can someone tell me what "Could not find kernel image: /casper/vmlinuz" means?16:40
bazhangtobe_, sounds like you did not fully update /upgrade , or made an error adding the PPA16:41
AdvoWorkgenii-around, drag0nius i try wine "......" & and it gives me an error then crashes. Without the & it loads and works,but keeps the terminal too16:44
Datastream111I googled it. Imma try to give it more mem persistance16:44
tapoutanyone know how to convert flac to mp3?16:44
Adam_does the iso have to be in the Windows folder??16:44
Adam_bazhang16:45
bazhanghttp://www.upubuntu.com/2011/06/how-to-convert-flac-to-mp3-from-command.html tapout16:46
viru_how to mount windows partition in ubuntu when ubuntu is installed alongside with windows?16:46
Adam_nevermind16:46
lee_@tapout, I am new , but if you can get Audacity, you can play the file and record it as it plays and save it that way.16:47
elspuddyhow do i go about finding what programs are installed on my ubuntu box ?16:47
bazhanglee_, thats a huge amount of extra effort, no need for that16:47
lee_hmm truw16:47
Adam_hey  bazhang is the name of my filename md5 called md5sum?16:47
lee_Try open Shot?16:47
Adam_what's the name of the md5sum?16:48
bazhangtapout, try soundconverter if you wish to use the gui16:48
bazhang!hashes | Adam_16:48
ubottuAdam_: See http://mirror.anl.gov/pub/ubuntu-iso/CDs/12.04/MD5SUMS for the md5sums of the latest Ubuntu release16:48
Adam_wait so it's the iso name? i thought the iso was supposed to be on the cd rom?16:49
bazhang!info soundconverter | tap16:49
ubottutap: soundconverter (source: soundconverter): GNOME application to convert audio files into other formats. In component universe, is optional. Version 1.5.4-1 (precise), package size 109 kB, installed size 886 kB16:49
Adam_isn't the iso supposed to be on my bootable cd?16:49
bazhangAdam_, you md5 the iso to be sure its not corrupt, then reburn at low speed, do the disk integrity check and then install16:50
Adam_so i need to make sure the cd with the iso is in the computer?16:50
bazhangAdam_, is this not a regular install? is this from within windows (wubi)16:50
PapaSierrahow do i add to the /etc/apt/sources.list file from the command line? is there a special way or is it just a text file?16:50
Adam_my iso is on the cd and the path is in the WINDOWS folder16:50
lee_Armegedon transcoder?16:51
bazhangAdam_, the md5 check is of the iso you downloaded prior to burning to cd16:51
lee_ehtransamregedon?16:51
Adam_right now i'm trying to md5sum -c filename.md516:51
Adam_oh16:51
bazhangPapaSierra, sudo nano or gksudo gedit, depending on if you wish gui or cli16:51
=== chrisl is now known as chrisl_away
lee_<tapout>  try transamregedon in the software search16:52
PapaSierrabazhang ok but the bottom line is it's just a text file right? after editing i apt-get update knows about the new entries already?16:52
bazhangPapaSierra, once you save it sure16:52
drag0niuswhats some good vim color scheme? Can't read default one through ssh ;/16:53
PapaSierra:)16:53
drag0niusand vimrc16:53
lee_Openshot though is a power house in its self. its more then just a Video editor16:54
Adam_so the iso needs to be in my windows folder?16:55
Adam_bazhang?16:55
Adam_nevermind :)16:56
bujiis there a possibility to start a 64bit iso in 64bit enviroment double core in the virtualbox16:58
bazhangbuji, what does dual core have to do with it16:58
cornfeeddoes anyone know how i can get a full bash prompt while using the installer? the installer is not finding my network card, and aparently I need to install the driver from source.16:58
bazhangcornfeed, from the alternate cd?16:59
bazhangbuji, have you tried asking in #vbox yet16:59
cornfeedwell i am actually using a distro that is build on ubuntu16:59
cornfeedbut it looks like the standard cd16:59
bazhangcornfeed, which is what16:59
cornfeedzentyal16:59
bujii dont't know, i tried, and the iso doesnt work on the virtual machine, but it does work, if i use it for start up17:00
gogliikonia :how to kill nautilus17:01
bujibazhang, not ye - i try17:01
burghello. is there any way to add a bottom task bar in ubuntu 12.04 (with gnome3) with all running applications ? (like on gnome2 and windows and kde and so on)17:01
NewLappygogli, kill -5 `pidof nautilus`17:02
Adam_where do i download the .md5????17:02
gogli kill -5 'pidof nautilus'17:02
gogli-bash: kill: pidof nautilus: arguments must be process or job IDs17:02
L3top!md5sum17:03
ubottuTo verify your Ubuntu ISO image (or other files for which an MD5 checksum is provided), see http://help.ubuntu.com/community/HowToMD5SUM or http://www.linuxquestions.org/linux/answers/LQ_ISO/Checking_the_md5sum_in_Windows17:03
bazhang!hashes | Adam_ from here17:03
ubottuAdam_ from here: See http://mirror.anl.gov/pub/ubuntu-iso/CDs/12.04/MD5SUMS for the md5sums of the latest Ubuntu release17:03
gogliL3top : command to check md5sum17:03
Adam_ya but i need to download it!17:04
NewLappygogli, don't use quotes....use the tic marks that share the ~ key17:04
bazhangAdam_, then go to that website and do so17:04
Adam_im using 12.04 desktop so what do i type?17:04
Adam_link me to a .md5 download17:04
bazhangAdam_, you go to that website17:04
gogli-bash: kill: pidof: arguments must be process or job IDs17:04
gogli-bash: kill: nautilus: arguments must be process or job IDs17:04
bazhangAdam_, I did link you already, twice17:05
Adam_? that's not a download!!17:05
Adam_i need a .md5 file in my windows folder so i can run the command17:05
NewLappygogli, try it as two separate commands then....pidof nautilus17:05
OerHeks Adam_ it is just that HEX number on the page bazang gave you.17:05
T3Xhow do i completely remove a package or software from ubuntu?17:06
NewLappyand then take the number that returns and kill -5 6541 (or whatever the number is)17:06
tobe_bazhang: ok thanks for the help earlier. i guess you were right?? i dont know but i followed this to get the repository and install of gimp2.8--> http://ubuntuforums.org/showthread.php?t=1967043&highlight=gimp+2.8+in+ubuntu+12.0417:06
Adam_could you give me an example of what to type for "filename" in md5sum -c filename.md517:06
NewLappyT3X, apt-get remove <package name>   then apt-get purge <package name>17:06
Adam_is it the random letters and numbers? 23924lkdjfsflk417:06
NewLappygogli, did that work for you?17:07
OerHeksAdam_, yes, something like that17:08
lotuspsychjehowto remove removed harddisks from boot list to prevent S to skip mounting?17:08
Adam_ok i just entered it in and it didn't work17:08
gogliNewLappy : Yup ! i tried this one        ps -A | grep nautilus ----> kill Id17:08
Adam_no such file or directory oerheks17:09
NewLappygogli, awesome, glad you got it sorted17:09
gogliNewLappy : what should i do , if i want to stop a process17:09
gogliSorry , a service17:10
Adam_how do i download the md5sum!!!?? i need to download it for it to work17:10
viru_where can i find 'Windows' folder of windows in ubuntu when ubuntu is installed alongside with windows?17:10
gogliNewLappy : i want to stop a service , what should i do ?17:11
andre_pli'm trying to install a package from ppa (postgis 2.0) but after adding the repo and updating apt still only sees the 1.5 version, the ppa's page on launchpad shows 2.017:11
jubobahello17:11
jubobaI'm having trouble with flash player going to fullscreen. I reinstalled completely the plugin but it still doesn't go fullscreen17:12
Adam_where do i download md5sums for ubuntu desktop 12.04??17:12
L3topAdam_: why do you feel you need to download it?17:13
jubobaL3top, to check?17:13
L3topOne can check by looking at it.17:13
Adam_because when i run that command with the hash it says "No such file or directory"17:13
jubobaAdam_, md5sum17:13
ShinobiWhere do I calibrate ntrig in 12.0417:14
Adam_what about it17:14
gogliAdam_  : every copy of ubuntu hae its md5sum file with it , so download it from where you have download your ubuntu17:14
=== vibhav is now known as vibhavOne
Adam_no when i downloaded the iso all i got was the iso17:14
L3top!hashes | run md5sum ubuntuisoidownloadedname.iso and then confirm it against this17:14
ubotturun md5sum ubuntuisoidownloadedname.iso and then confirm it against this: See http://mirror.anl.gov/pub/ubuntu-iso/CDs/12.04/MD5SUMS for the md5sums of the latest Ubuntu release17:14
OerHeksAdam_, why did you use md5sum -c filename.md5 ? you said you want it for windows, did you follow the instructions anyway ?17:14
Adam_yes i'm trying to dual boot ubuntu from a cd on windows17:15
jubobaI'm having trouble with flash player going to fullscreen. I reinstalled completely the plugin but it still doesn't go fullscreen17:15
Adam_i did look follow the instrcutions17:15
gogliL3top  : how to stop a service ?17:15
PapaSierrahow do i completely uninstall php? i installed it with apt-get17:15
Adam_that's what it says to do17:15
L3topgogli: depends on the service. What are you trying to stop17:15
PapaSierrasomething like /etc/init.d/mysqld stop17:16
gogliL3top : apache service17:16
=== thallada is now known as Guest96851
gogliPapaSierra : ok !17:16
Adam_so what do i do OerHeks? the instructions say to enter md5sum -c filename.md517:16
Adam_and all i got was an iso file17:17
L3topgogli: sudo service apache2 stop        or restart17:17
Adam_no md5sum file17:17
OerHeksAdam_, i read something different for windows > https://help.ubuntu.com/community/HowToMD5SUM/#MD5SUM_on_Windows17:17
jubobaplease help17:17
L3topgogli: simply typing sudo service apache2 will give you a list of available commands17:18
gogliL3top : Dude  ! i get it17:18
sveinseI'm looking for a tool to collect server stats (network, cpu, hdd io, temperature, etc.) and present in a web page. Any proposals for an app for this?17:18
gogliL3top : how to use network proxy on ubuntu17:19
L3topAdam_: Please type md5sum (isoname.iso)    where isoname is the name of the iso... without ( ).17:20
OerHeksL3top, in windows?17:20
L3topdoh17:20
Adam_ok and what should the path be?17:20
L3topscratch that Adam_ I was not paying good enough attention17:20
Adam_ok17:21
gogliAdam_   : Wao ! you don't know how to use path17:21
Adam_ya it's really weird cause the bootable cd works and there's a wubi file and when i click reboot now it goes to ubuntu menu and i click install ubuntu and then i get some kernel panic thign17:21
Adam_thing*17:21
IdleOnegogli: Why not explain it to him instead17:21
gogliIdleOne   : it will be very difficult L3top and even to me to explain him17:22
L3topAdam_: You said before you were on desktop 1204, 386 or amd64?17:22
delacis there any web resource where I could check what packages are in the proposed section of the repository?17:23
Adam_38617:23
drag0niusis there some way to make vim color scheme global?17:23
gogliIdleOne  : how to use Network proxy[by default tool] in ubuntu17:23
IdleOnewhy ask me directly, what makes you think i would know. Also, woah, you don't know how?17:24
L3topcan't you just get the md5sum without running -c in windows IdleOne?17:24
DRaKhThuLhello... i have a problem... my /.private folder has 2.2gb and i don't need it ... i've read about what it does, but i keep most of my data on an external drive and i don't need this backup... how can i get rid of it??17:24
IdleOneL3top: think you meant that for Adam_17:24
gogliIdleOne : i know , but i don't know how to do that think perfectly17:25
Adam_ya17:25
Adam_i'll try L3top17:25
L3topAdam_: I believe you will still need to specify the name of the iso17:26
eein_anyone know how to make PA detect audio cards with multiple inputs and outputs correctly, it gives me surround sound profiles which is wrong17:26
L3topIdleOne:  I was asking you because you asked <OerHeks> L3top, in windows?17:26
|Long|i accidently sudo chmod 0755 /etc dir now i cnt changed it back anyone pls help17:26
gogliIdleOne : can you suggest me some good site17:26
IdleOneL3top: wasn't me.17:27
Adam_so md5sum ubuntu-12.04-i386.iso ?17:27
gogliAdam_  : hey ! are you using window now17:27
Adam_no i'm on osx17:28
Adam_i'm trying to install ubuntu on an old xp laptop17:28
|Long|sudo vim fstab17:28
|Long|sudo: /etc/sudoers is mode 0755, should be 044017:28
|Long|sudo: no valid sudoers sources found, quitting17:28
|Long|sudo: unable to initialize policy plugin17:28
|Long|can someone plz help17:28
gogliAdam_ : Hmm...                                  can you use terminal of OSX17:29
Adam_i've already made a partition for ubuntu17:29
* eein_ wonders why every distro uses PA if it is so lacking17:29
Adam_i'm just trying to install ubuntu now17:30
=== lub` is now known as lubmil
gogliAdam_  : ok ! are you using unetbootin    to install your ISO ?17:31
Adam_gogli, im using a cd rom with the iso on it17:31
IdleOneAdam_: I missed the original question/problem. Could you please explain what is not working for you?17:32
gogliAdam_  : O ! thats great then , by default when you make ISO , it undergoes for md5sum17:32
daoneunv!ask17:32
ubottuPlease don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience17:32
genii-aroundIsn't there a particular ISO to use for Mac installs?17:32
daoneunv!patience17:33
ubottuDon't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. While you wait, try searching https://help.ubuntu.com or http://ubuntuforums.org or http://askubuntu.com/17:33
Adam_well i inserted the ubuntu cdrom with the iso on it and it booted with the cd. once it got the the ubuntu menu i pressed enter on install ubuntu and then i got some weird code that said stuff like Call Trace: adlsfkja;sldfkj and Code: laksdfj and then e3 53 123 etc17:33
daoneunv!next17:33
=== macro is now known as Guest24267
IdleOnedaoneunv: please stop doing that17:33
Adam_ok then so now what?17:33
gogli!patience >daoneunv17:33
ubottudaoneunv, please see my private message17:33
bekksgenii-around: There is a PPC iso, but thats useless when having an intel-based Mac.17:33
Adam_yeah17:33
Adam_i'm trying to dual boot it on this windows pc17:34
mahdihi, I get this error when I want to install gimp 2.8: Could not find Python headers17:34
genii-aroundbekks: http://cdimage.ubuntu.com/releases/12.04/release/ubuntu-12.04-desktop-amd64+mac.iso seems to indicate not for PPC17:34
IdleOneAdam_: ok, well what you should do now is md5sum it to make sure it matches and the iso is not corrupt. if you need help doing that in Windows I suggest you ask in ##windows17:34
daoneunvDo I need the gnome-shell to get rid of Unity?17:34
Adam_i think i know how but i don't know what path to use17:34
Adam_the iso is on the cd so17:35
gogli!patience >daoneunv17:35
ubottudaoneunv, please see my private message17:35
IdleOneAdam_: if the md5 match then there is some other issue and we can work on it further.17:35
Adam_so do i make a path to the cd17:35
Adam_ok17:35
IdleOnegogli: Please stop.17:35
bekksgenii-around: Because thats the ISO for 64bit intel/amd-based.17:35
gogliIdleOne  ; )17:35
melvin2server irc.explosionirc.net17:36
gogliIdleOne : can you help me how to use network proxy on ubuntu ?17:36
Adam_how do i make a path to the iso on the cd rom??17:36
IdleOnegogli: Sorry, I can't17:36
Adam_cause wouldn't i want to type "md5sum ubuntu-12.04-i386.iso?17:36
genii-aroundbekks: I'm wondering why a regular amd64 and then a Mac amd64. I imagine something to do withMac  refit  or efi maybe17:37
daoneunvIdleOne: Hey how do I get rid of the unity stuff? I just want regular gnome17:37
IdleOne!notunity > daoneunv17:37
ubottudaoneunv, please see my private message17:37
bekksgenii-around: Totally wrong. The mac ISO is for the PowerPC (PPC) architecture.17:39
Adam_so i need to md5sum the iso? IdleOne17:39
Adam_?17:39
IdleOneAdam_: it would be prudent yes17:40
Adam_IdleOne, then how do i md5sum the iso if the iso is on the cdrom?17:41
adam__er17:41
petanhey17:41
petanis there any tool which automatically blacklist bad IP's?17:41
petanI would like to install some on my server which is getting spammed like hell17:41
=== kitties is now known as sandyd
petanalso, is it a good idea to insert 32mb of Ip's to iptables?17:42
=== dark3n is now known as dark3n|off
petanI don't know how fast it is17:42
petan!spam17:42
petanhm... quiet here :)17:44
OerHekspetan, i would use deny.host > http://askubuntu.com/questions/23163/how-to-edit-hosts-deny-and-hosts-allow17:45
petanok17:45
PapaSierrawhat could cause mysqld to fail to restart? error in my.cnf?17:45
mraxilusHey there, I have an hp z600 with which ubuntu doesn't render properly without acpi off,  so I need to be able to modify that option in the grub from another computer, how can I do this17:45
OerHekspetan and dban ( put him on the deny.host file after x attempts)17:45
PapaSierrabetter question, how can i check?17:45
Adam_OK I MD5SUMED IT! and it game me the hash code or whatever. now what?17:45
OerHeksPapaSierra, best check is the error you got.17:46
PapaSierraOerHeks where? i can't see any error17:46
PapaSierraand /var/log/mysql.err is empty17:46
Adam_IdleOne?17:47
PapaSierraand /var/log/mysql.log is also empty17:47
IdleOneAdam_: now you compared it against the official hash provided at !hash17:47
IdleOne!hash17:47
xbmcn00bI've got a laptop with a dead screen, I can access it via ssh from another laptop. How can I configure GUI output to DVI?17:47
Adam_and where do i find that to compare it with?17:47
IdleOneerr, !hash doesn't work. gimme a sec Adam_17:47
PapaSierraOerHeks sorry, but any ideas where the error may have been logged?17:48
IdleOneAdam_: https://help.ubuntu.com/community/UbuntuHashes17:48
daoneunvIdleOne: Hey.. Any assistance for choppy GFX? When I move windows the GFX becomes distorted.17:48
OerHeksPapaSierra, those would be the ones.17:48
PapaSierrahm.. they're empty. so what does that mean?17:49
MoPacHello -- I'm trying to do an alternate install (for full-disk encryption) using a USB .iso configured in Win7 with Yumi. The installer boots just fine, but it keeps looking for each step of the installation on the optical drive rather than the USB. Does the altnernate .iso only work on optical media?17:49
Adam_IdleOne, ok it's different but the weird thing is that the iso i used is called ._ubuntu-12.04-desktop-i386.iso and the one on the cd is the same thing but without the ._ at the beginning17:49
daoneunvIdleOne: Here's my lspci | grep VGA: 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)17:50
Pinkamena_Dhi i just installed screen on a ssh to ubuntu server and i have  a really stupid problem17:50
Pinkamena_Di cant scroll up the page of the terminal17:50
Pinkamena_Dhow do you scroll with screen? usually its just shift+pageup but that does not work17:50
IdleOneAdam_: alright, there is your problem. Download the iso again from www.ubuntu.com and burn a new CD or USB.17:50
andre_plPinkamena_D: you need to press ctrl+A to enter scrollback mode in screen17:50
andre_pland esc to exit17:50
andre_plsorry17:50
Pinkamena_Dok17:50
andre_plctrl+a, esc17:51
andre_plthen esc to exit17:51
ldiamondyea it's esc17:51
zykotick9Pinkamena_D: try shift+pgup17:51
Adam_ok but the thing is the computer that i'm doesn't have its internet working so what i could do is get a new cd and burn the ._ubuntu iso to it17:51
ldiamondctrl+a, esc17:51
ldiamondthen ctrl+b for page up17:51
kayaguys need to how does the guest user in ubuntu 11.10 lost ma copied  files after restarting17:51
ldiamondctrl+f for page down17:51
=== aethero is now known as MysterySpirit
ldiamondj and k for up and down 1 row17:51
ldiamondvim cheat sheets are all over the place17:52
ldiamonderr17:52
ldiamondscreen17:52
=== MysterySpirit is now known as aethero
Pinkamena_Dthanks andre, that was it17:53
MoPacCould anybody help with issues related to using the alternate install .iso on a USB stick?17:53
ldiamondPinkamena_D, look at what I said.17:53
Pinkamena_Doh17:53
IdleOneAdam_: if the shashes don't match that means either your download was corrupted somehow ( it happens) or you don't have a real Ubuntu .iso (modified by someone and there is no way to tell what they changed).17:53
IdleOnehashes*17:53
Pinkamena_Dyes, i just used page up and pagd down for page up and page down17:54
Pinkamena_D but w/e17:54
Adam_ok well im gonna try to reburn it. should i use the one with ._ at the beginning to burn onto the cd??17:54
bwlangstrange networking problem... i have 2 hosts on the same subnet... one can ping internet hosts, one cannot.  both can ping each other.  Any ideas about why one host can't see the internet?17:55
L3topIdleOne: I never learned to read.17:55
daoneunvJust wondering if anyone saw my last messages.17:55
IdleOneL3top: no worries :)17:56
sirlark_homebwlang: different gateways are different DNS settings would be my first guess17:56
sirlark_homeHi all, I installed precise server at the office today, and everything went smoothly until the reboot. On reboot, the bios couldn't find grub, i.e. I got the bios message saying please insert a bootable disk. It's a brand new machine. If I reboot, and press f10 to go to the bios boot menu and select the drive, it boots just fine. Why won't the bios find grub on the boot disk (specified it the bios boot order) automatically.17:57
bwlangsirlark_home: route -n shows the same gateway... dns is working fine on both, but I'm using ip addresses for testing.17:57
sirlark_homebwlang: are dns settings the same on both?17:58
sirlark_homebwlang: but if you're trying to ping by IP address, nvm17:59
sirlark_homebwlang: is the gateway on the same subnet, or is one machine acting as router/bridge/nat17:59
bwlangsirlark_home: the gateway is some corporate router - 172.17.10.1 on both hosts18:00
philbuchHello, I would like to learn about computers, anyone willing to help?18:00
bwlangphilbuch: just ask your questions.18:01
gigixphilbuch, "about computers" is quite vague18:01
philbuchAlright thanks. Where do I start when I want to learn?18:01
gigixwhat aspects ? programming ? how they work ? how an OS work ?18:01
bwlangphilbuch: wikipedia18:01
IdleOnephilbuch: it depends what you want to learn. This channel is for Ubuntu support so if you have any specific questions related to Ubuntu we might be able to help.18:02
sirlark_homephilbuch: you will need to be more specific about what you want to learn... you've basically just asked the equivalent of "Hi I'd like to learn about agriculture"18:02
sirlark_homebwlang: what subnet are your two machines on?18:03
bwlang172.17.10.0/25518:03
bwlangsilark_home: ^18:03
sirlark_homebwlang: how are they physically connected (you might want to paste an ascii diagram to a pastebin18:04
philbuchOkay, thanks to everyone for your answers.18:05
bwlangsilark_home: one is on some kind of xsigo 10G network, the other is a vm18:06
daoneunvGood website for gtk2 themes?18:06
IdleOne!themes > daoneunv18:07
ubottudaoneunv, please see my private message18:07
digitalcakeWhere does ambiance store the icons for the folders? I want to change the icon of my of my folders and I wanted to use of the ambiance theme ones18:07
bazhangdaoneunv, gnome-look.org18:07
gryphilbuch: you'll probably want to start at en.wikipedia.org/wiki/Computer and go from there18:08
L3topsirlark_home: have you tried to sudo update-grub /dev/sdX   where X is your boot drive (typically "a")18:08
zykotick9L3top: i don't think update-grub requires a device to be specified18:10
giga2Is there a site where I can learn command line and how to use it?18:11
genii-aroundgiga2: https://help.ubuntu.com/community/UsingTheTerminal/18:12
bazhang!rute | giga218:12
ubottugiga2: documentation is to be found at http://help.ubuntu.com and http://wiki.ubuntu.com - General linux documentation: http://www.tldp.org - http://rute.2038bug.com18:12
=== wainersm_lunch is now known as wainersm
=== Myr|Away is now known as Myr
sirlark_homebwlang: assuming the Vm in on the other physical machine, is the virtualisation software running NAT or staright bridge for networking? Also, is the a firewall on the physical machine?18:16
sirlark_homeL3top: yes, that broke the boot completely, and I had to reinstall18:17
SS-Doomtrooperi am trying cmd and ipconfig /all but it wont work18:18
sunzHi! i just installed ubuntu-studio, everything went well except that the fonts look somewhat "rainbow-colored" here and there..  what can i do to fix that?18:18
zykotick9SS-Doomtrooper: ifconfig?18:18
L3topzykotick9: I just always do it because I have different installs on different drives on my dev box, and depending on what I am doing I may or may not want it to find grub wherever it lies... designating boot drives in bios.18:18
SS-Doomtrooperoh ty18:18
compdocSS-Doomtrooper, its just ifconfg. no -all18:19
SS-Doomtrooperand where do I activate my license? The guy I bought it from gave me the licensing code, but I can't find where to register18:20
L3topsirlark_home: even if grub is totally hosed it can be reinstalled... for future reference. You do not have to reinstall due to grub puking.18:20
sirlark_homeL3top: I did try to 'rescue my broken system' to do precisely that, but choosing the install a boat loader went through the partitioning and installation steps again. I tried to do the manual grub from a shell thing, but couldn't find grub on the CD18:21
bazhangSS-Doomtrooper, bought what18:21
SS-Doomtrooperthe copy of ubuntu18:21
bazhangSS-Doomtrooper, its free18:22
sirlark_homeeither way, regrubbing didn't fix the problem18:22
SS-Doomtrooperhe told me I had to register at register.ubuntu.com and fill in the license code to get it activated18:22
bazhangSS-Doomtrooper, thats false18:22
krrHello! Can you please suggest me Ubuntu supported ~ 14" Laptop? Price ~ 1k. From personal experience. Just don`t want to have any problems with drivers etc..18:22
sirlark_homeThe hard drive uses a GPT partition table, but that's what precise installation seemed to do. I didn't choose it18:22
SS-Doomtrooperwhat do you mean free?18:22
L3topsirlark_home: you would want to chroot into your install from the live cd, and grub-install from there.18:23
L3topsirlark_home: I understand18:23
sirlark_homeL3top: aah, okay... (re the chroot)18:23
superlouI'm on Xubuntu with a quadro fx go1000 graphics card on an older laptop, and based on http://en.gentoo-wiki.com/wiki/Nvidia_Drivers it seems like the 173.14.xx drivers should support the card.  However, there is nothing listed in additional drivers?  Is there a way to force Xubuntu to use the nvidia drivers?18:23
bekkssuperlou: Just install them. nvidia-17318:23
Dr_williskrr,  theres several web sites that sell laptops with Ubuntu preinstalled - in a range of prices18:24
grykrr: http://www.linuxcertified.com/linux-laptop-lc2464dc.html for example18:24
prodnixhi all, Im getting hundreds of errors when upgrading from 11.10 to 12.04.18:24
prodnixI am using a Xen and the only iso that works is 11.1018:25
superloubekks, just sudo apt-get install nvidia-173?  They can be installed side by side with nouveau, or is there some kind of prepartaion i should do?18:25
schnuffle1prodnix: you upgrade a xen VM or the host?18:25
Dr_willissuperlou,  nvidia installing will blacklist the nouveau drivers i belive18:26
prodnixneither, aint touched the host in ages and im trying to make a ubuntu VM.18:26
superlouDr_willis, bekks, will just go for it then, thanks18:26
prodnixshnuffle1: neither, aint touched the host in ages and im trying to make a ubuntu VM.18:26
=== bwlang_ is now known as bwlang
schnuffle1prodnix: so your host runs what? And from the host you want to create a new 12.04 vm?18:27
prodnixthe host runs xen and thats it.18:27
superlouDr_willis, bekks, seems like xorg-video-abi-10 is not installable.  Will research.  It's complaining about "nable to correct problems, you have held broken packages."18:27
prodnixno GUI, nothing.18:27
schnuffle1prodnix: so you create your VM with which command, which apprenlty fails?18:27
superlouCrud, seems related to http://www.nvnews.net/vbulletin/showthread.php?t=17948918:28
prodnixschnuffle1: I have no problems starting the VM and installling. I want to take the 11.10 vm to 12.04 and the GUI upgrader fails to install hundreds of packages18:29
SS-Doomtrooperhe ripped me off18:29
SS-Doomtrooperim gonna kick his ass18:29
IdleOnePlease mind your language18:29
compdocprodnix, its best to create a new 12.04 vm, and transfer settings, etc18:29
schnuffle1prodnix: okay, tried on the command line?  open a terminal and type sudo apt-get update && sudo apt-get dist-upgrade. Of course the repos should point to 12.0418:30
* baba24 5178059754912211 | 740 | Jordan Marshall | 0314 | 57702 | 4703 W Chicago St | N/A | Rapid City | US | SD | 605-786-4876 VALID %18:30
bazhangbaba24, dont do that18:30
prodnixcompdoc, none of the 12.04 iso's work. all drop back to prompt18:30
compdocprodnix, do you use virt-manager?18:30
prodnixcompdoc, no plain terminal18:31
john__I used terminal for the sudo update and it worked for me18:31
prodnixcompdoc, i dont have GUI on host18:31
schnuffle1prodnix: you saw my question?18:31
prodnixschnuffle1, trying now18:32
compdocprodnix, all the servers I build do> aNYWAY, whats the command you use18:32
prodnixcompdoc i use xl18:32
schnuffle1prodnix: if it fails as well paste the error to see what could be the problem. Did you use any extra repos or apps installed manually?18:33
prodnixschnuffles, no this is a fresh install.18:33
prodnixschnuffles1, no this is a fresh install.18:33
compdocprodnix, you install qemu-kvm?18:33
schnuffle1prodnix: you can use tab completion for names so schn<tabY18:33
prodnixschnuffle1: ty :)18:34
prodnixcompdoc: no, its a fresh install18:34
schnuffle1compdoc: he uses XEN but his problem is more that he can'T upgrade his VM from 11.04 to 12.0418:34
compdocoh, xen18:35
schnuffle1prodnix: did you update the fresh install?18:35
prodnixschnuffle1: no, i just clicked on the prompt to upgrade18:35
compdocif you cannot get 12.04 running from a new install, then how you gonna run an upgraded one?18:35
schnuffle1prodnix: then better use the terminal18:35
prodnixcompdoc: 12.04 just doesnt install off iso..18:36
john__just disk or usb install18:36
schnuffle1compdoc: tried the alternate iso?18:36
john__iso may be the issue18:36
philbuchI just reset my password at the ubuntu website and when I login it doesn't work...18:37
prodnixschnuffle1: yes, fails on creating base files18:37
schnuffle1prodnix: I prefer KVM otherwise I would test it.18:37
compdocthere's no reason it shouldnt run, unless somethings wrong. Ive installed 12.04 in qemu-kvm without issues18:37
Jonii_Anyone know any reaon why ubuntu 12.4 messes up multitouch on my zenbook clickpad, so that for 4 fnger touch I need 5 fingers, for 3 finger touch 4 fingers, but 2 finger scroll works just fine?18:38
schnuffle1me too but with KVM. Never got into XEN18:38
prodnixschnuffle1: Ive been using xen for a long time now and heavily rely on gfx-passthrough18:38
compdoc12.04 64bit version18:38
_krzywy_a18:38
prodnixschnuffle1: http://www.youtube.com/watch?v=L_g7ZBMWoLk&feature=g-upl to get a better idea of what i do, if your bored :)18:39
schnuffle1prodnix: no critic about XEN it seems to do its job quite, it was just not ready when I tested it the first timeand when it was ready I found KVM more attracting18:39
schnuffle1prodnix: Nice idea, and grahpics are fast enough for heavy 3D gaming?18:40
prodnixschnuffle1: work better than u could imagine. very impressive. havent booted win7 on baremetal in over a year now18:41
prodnixschnuffle1: check out my other video for benchmark resutls18:42
sirlark_homeL3top: Can I just disable UEFI in the bios and do a 'normal install', i.e. without the whole gpt partition18:42
schnuffle1prodnix: okay back to your problem I would better sort out why 12.04 doesn't install the upgrading from 110.418:42
prodnixschnuffle1: that would be awesome18:42
prodnixschnuffle1: I need to be able to disable pixx-4 daemon or something, thats the error that i get when installing.18:43
schnuffle1prodnix: so describe your env, how you create the VM and how it fails. and of course what system runs on the host18:43
prodnixschnuffle1: just a sec and ill fire up the installer now18:43
L3topsirlark_home: it is my understanding that th gpt is required for larger drives... unrelated to UEFI, but this is not one of my stronger spheres of knowledge.18:44
prodnixschnuffle1: I use debian 6 host. Xen 4.1.2 and have many different ubuntu isos in my downloads18:44
prodnixschnuffle1: I write my xl.cfg files by hand and use xl not xm as it is depreciated18:45
leoquantfsck goes via the recovery mode on u12.04. is this a long proces as in mem check, or a fast one.? (30gb)18:46
schnuffle1leoquant: fsck on 30GB should take seconds maybe max a minute18:47
genii-aroundleoquant: It's usually pretty fast18:47
leoquantok thx18:47
genii-aroundDepends maybe too on the fs type though18:48
prodnixschnuffle1: I give the vm 2 vcpus and 1024 ram. I am currently using the HVM loader to boot the VM18:48
sirlark_homeL3top: Thanks anyway18:49
deyanhello everyone18:50
schnuffle1prodnix: show the disk = config line18:50
leoquantschnuffle, it looked like nothing happened. After the check it is a shutdown now, because no other "menu" is popping up?18:50
deyanhow can run ubuntu 64 bits with ati HD6790 video ?18:50
deyanthere is nasty bug in xserver18:51
prodnixschnuffle1: "disk=[ 'tap:/xen/local/img/ubuntu-desktop.img,hda,w', 'file:/home/prod/Downloads/ubuntu-11.10-desktop-amd64.iso,hdb:cdrom,r' ]"18:51
schnuffle1leoquant: it shut down after checking? and what happens when you restart18:51
deyanand i have a black screen18:51
prodnixschnuffle1: without the quotes18:51
=== ubuntuser is now known as RBARRR
leoquantschnuffle, no it doesn't shut down after checking18:51
leoquantI did a powerbutton push....:/18:52
RBARRRHello, I am having problems configuring my grub, virtual tty's, and plymouth resolution. Can it be due to the fact I am using LVM + crypt?18:52
RBARRRAlso, the last kernel upgrade for Lucid screwed my grub locales, tildes and stuff like that are showing with "?"18:53
schnuffle1leoquant: and what happend after the fsck?18:55
=== bwlang_ is now known as bwlang
leoquantschnuffle, nothing, a blinking cursor....18:55
schnuffle1leoquant: sounds that there's something more not correct. What happened between the PC as okay and now it wnat to fsck?18:57
=== dark3n|off is now known as dark3n
PapaSierrais there any known reason why "mysql  Ver 14.14 Distrib 5.5.25, for debian-linux-gnu (x86_64) using readline 6.2" would not work on Ubuntu12?18:58
leoquantno it doesn't want the (auto) fsck, maybe I am fine. but it is not a need/clean process imho schnuffle118:59
drag0niushow do i tell ubuntu server to use eth1 as networking device?18:59
drag0niusNIC i want "WAN" connected to is eth018:59
drag0niuseth1*18:59
drag0niusLAN NIC is eth018:59
daoneunv!themes19:00
ubottuFind your themes at: http://www.gnome-look.org - http://art.gnome.org - http://www.kde-look.org - http://kubuntu-art.org - http://themes.freshmeat.net/browse/58/ - http://www.guistyles.com - https://wiki.ubuntu.com/Artwork/ - Also see !changethemes and https://help.ubuntu.com/community/UbuntuEyeCandy19:00
schnuffle1leoquant: normally every n reboots an fsck is done and when it's finished it just continues booting19:00
drag0niusright now it does not start net service unless i plug cable into eth019:00
daoneunv!themes > daoneunv19:00
ubottudaoneunv, please see my private message19:00
cweilemannHas anyone else experienced an extremely long boot time (perhaps sleeps for 45-60 seconds between scripts) for startup scripts / processes on 12.04 and fixed this?19:00
leoquantschnuffle1 not on ubuntu 12.04 afaik19:01
icemanany ideas how to get 64bit java and firefox on ubuntu 12.04  with vpn? it seem to only work with 32bit19:01
leoquantprevious releases had the auto check19:01
leoquantand you could "play"with the timeintervals19:02
icemandoes it make any different using either virtualbox or xen on quart cores cpu system?19:02
leoquanthad the fsck every 60 boots schnuffle119:03
schnuffle1leoquant: then you know more then me :) haven'T checked it yet... just checked it is still checked :)19:03
daoneunvWhy would GT3 remove minimize and maximize functionality?19:03
daoneunv& how can I get them back?19:04
leoquantif this is possible on 12.04 I would be glad to hear how to do that19:04
savidHi, I've selected "Make local sound devices available as DLNA/UPnP Media Server" in my pulseaudio prefs, but I don't see the DLNA server show up on my PS3.  Any ideas what else I need to do to make this work?  I'm using Ubuntu 12.0419:04
leoquantok schnuffle1 ツ19:04
schnuffle1leoquant: first you need to set the pass flag to 1 in fstab19:04
martmanare there any updated guides for 12.04 on compiling xen by hand?19:05
martmanand the kernel19:05
schnuffle1leoquant: and to the set the frequence of the checks sudo tune2fs -c 50 /dev/[s|h]d[a-d][1-9]19:08
leoquanthttp://paste.ubuntu.com/1075278/ schnuffle119:08
schnuffle1leoquant: so your root partition will get checked every n reboot where n can be set as I showed you above19:09
leoquantok thx schnuffle119:09
=== michael is now known as Guest94659
prodnixschnuffle1: when I use the alt iso I cant get past "installing base files"19:14
prodnixschnuffle1: when using GUI installers they all drop to prompt19:15
schnuffle1prodnix: certainly some graphic problem19:16
morpheuscan anyone sugest a good book/pdf on tcp/ip19:16
prodnixschnuffle1: GUI installers or alt too? I am using the emulated qemu vga for now but eventually will be moving onto a passed through gfx.19:17
elspuddyhow do i run disk utilty as root ? i cant seem to edit a drive19:17
MonkeyDustmorpheus  tcp/ip for dummies19:17
morpheusabit more advanced than that please19:18
morpheusMonkeyDust19:18
anthologymorpheus: http://openpdf.info/ebook/tcp-ip-pdf.html19:19
schnuffle1prodnix: I just installed a 12.04 64bit with qemu-kvm without a problem. And for XEN to sort out the prob my knowledge might not be enough19:20
o0o0elspuddy, you can run a different program : gparted19:20
=== o0o0 is now known as Gyges
prodnixschnuffle1: ye i was kinda preparing for it. thanx for your time anyways19:22
schnuffle1prodnix: youo're welcome19:24
elspuddyo0o0 : tryed that it ask's for my password then quits19:25
marsfligthUbuntu 12.04 64bit doesn't accept the password for my account. Are there others alternatives to 'chroot' method, maybe easier to reset my login password?19:26
Myrttimarsfligth: reboot to single user mode19:27
catphishi have a recurring bug that crashes servers after an uptime of 200 days19:27
catphishdoes anyone know if it's been patched in 10.04 yet?19:27
JW_Hi all, anybody have experience configuring atd to work on a SMP server19:27
grysome do.. what's up19:28
marsfligthMyrtti: I don't get the grub list at startup. How can I invoke the grub?19:28
gry(some doesn't mean me but you'll likely find someone who'd respond to a full question) JW_19:28
Myrttimarsfligth: with shift key19:29
JW_Well I'd like to configure atd to work on a 32-core server so that jobs will run if the load is still less than 32, but it won't accept jobs that will send the load over 3219:29
drag0niuson my Ubuntu Server i can't scroll man pages/less commands (takes me to bottom right away), any ideas?19:29
marsfligthMyrtti: thank you a lot I don't knew how to19:29
drag0niusneither locally nor through ssh19:30
mongydrag0nius, using screen?19:30
drag0niushmm weird, its not every single time19:31
drag0niushave any idea how to tell Ubuntu Server to use eth1 instead of eth0 as default networking device?19:32
drag0niusbasically eth1 is my WAN and eth0 is LAN19:33
drag0niusbut it doesnt start networking without eth0 connected to wan19:33
genii-arounddrag0nius: You can use the trick of reversing their ethX designations in the 70-persistent-net.rules file I directed you at earlier19:33
drag0niushmm19:35
drag0niusits empty19:35
daoneunvHey guys I have gnome-shell-extension installed according to the Ubuntu Software Installer.19:35
daoneunvWhen I go to advance settings for gnome however.19:36
daoneunvIt doesn't give me the option to use shell extensions.19:36
marsfligthMyrtti: Sorry, 'recovery mode' in grub list is like 'single user mode'?19:37
Myrttimarsfligth: yes.19:37
daoneunvIt doesn't give me the option to use shell extensions.19:38
marsfligthGreat, now I go to try ...19:39
=== bwlang_ is now known as bwlang
=== JW_ is now known as JW__
JW__!atd19:41
JW__!at19:41
ubottuDas österreichische Team finden sie unter #ubuntu-at, deutschsprachigen Support bekommen sie auch in #ubuntu-de, #kubuntu-de oder #edubuntu-de. Geben sie einfach /join #ubuntu-at ein! Danke für ihr Verständnis.19:41
JW__hmm?  it's in German19:41
JW__sigh19:42
LjLyes, because it's the factoid for the Austrian channel...19:42
JW__oh, I was trying to get info on the program at19:42
icemanany idea how to get netflix video streaming to work ?19:42
drag0niusgenii-around: the file has nothing but comments right now19:43
genii-arounddrag0nius: Interesting. Usually lines like: SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:1d:72:ed:4b:9e", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"19:44
drag0niusi cleared it twice totally (all but comments)19:45
genii-arounddrag0nius: So when two lines and one is eth0 the other eth1, you can just reverse them in there, takes effect next boot19:45
drag0niussecond time i thought if i cleared it and then plugged to other card and reboot it would work19:46
a7i3n /quit19:46
drag0niusbut seems like after that second clear it's empty whole time19:46
drag0niuswould it get regenerated if i deleted it entirely?19:46
genii-aroundIt is also supposed to rebuild every boot, so should not be empty after clearing it and then sunsequent boots19:46
genii-around*subsequent19:46
drag0niuslike whole file not just content19:47
genii-arounddrag0nius: I haven't tried that but it *should* work. Maybe move it someplace safe though first19:47
drag0niusgenerally i have some big troubles starting dhcp server19:48
drag0niusservice restarts/starts etc dont work19:48
PapaSierrawhen i installed mysql i found that /var/run/mysqld was owned by "mysql root" and would not start unless i changed it to "mysql mysql". can you confirm if my fix is correct or whether the problem is actually elsewhere?19:49
rafaelementHi guys.I have a huawei e1550 modem 3g stick.it connects to the internet just fine on 12.04, but drops connection after a while.any help?19:49
marsfligthMyrtti: Have you idea how solve this error ''passwd cannot lock /etc/shadow try again later'?19:49
Myrttimarsfligth: not a clue - what command did you do when that appeared?19:49
DarkasakerionzHi people, anyone know about a mind map program for linux? Specially kde19:51
rafaelementHi guys.I have a huawei e1550 modem 3g stick.it connects to the internet just fine on 12.04, but drops connection after a while.any help?19:52
LjL!info semantik | Darkasakerionz, don't know if good, but19:52
ubottuDarkasakerionz, don't know if good, but: semantik (source: semantik): mindmapping-like tool for KDE. In component universe, is optional. Version 0.7.3-0ubuntu6 (precise), package size 590 kB, installed size 1973 kB19:52
BHSPitMonkeySometimes (often) my sound driver "crashes" and no sound hardware is even visible in Sound settings anymore. Have to reboot to fix. Can anyone propose a reboot-less solution?19:52
genii-arounddrag0nius: Are you shutting the machine down in a clean way usually?19:53
drag0niusshutdown -r 019:53
Darkasakerionzthanks19:53
drag0niusor ctrl alt delete19:54
genii-arounddrag0nius: That is not really a "clean" way19:54
PapaSierrais someone able to help me? ^^19:54
GygesDarkasakerionz, you may also check out the wikipedia article19:54
marsfligthMyrtti: I typed 'passwd -d accountname'19:54
drag0niusctrl alt delete only when dhcp @ router goes down and i cba writing that 20 chars password manually xD19:55
drag0niuswhat would be the clean way?19:55
Myrttimarsfligth: if you need to *reset* the password of 'accountname', then do passwd accountname19:55
Myrttimarsfligth: no need for -d19:55
Myrttimarsfligth: that allows you to give the account a new password19:56
marsfligthMyrtti: I done 'passwd accountname' but I get no response. It should be ask for new password, but it skip all19:57
guntbertmarsfligth: just     passwd19:57
Myrttiguntbert: in single user mode?19:58
marsfligthMyrtti: What about to do something like 'touch /etc/passwd'?19:58
guntbertMyrtti: I overlooked that :-(19:58
Myrttimarsfligth: this is about as far where my knowledge on this reaches :-(19:58
BHSPitMonkeySometimes (often) my sound driver "crashes" and no sound hardware is even visible in Sound settings anymore. Have to reboot to fix. Can anyone propose a reboot-less solution?19:59
marsfligthMyrtti: Thanks anyway for all your suggestions19:59
harriscan you put ubuntu 12.04 on android tablet and why would you want it on a tablet19:59
BHSPitMonkeyharris: you can put it on any hardware you have full control over and that meets ubuntu's requirements20:00
BHSPitMonkey(and on which all the essential hardware is supported)20:00
sandydDoes anyone know if fsck is static by default?20:01
harrisBHSPitMonkey,  i am rooted20:01
genii-aroundsandyd: ldd /sbin/fsck*   indicates not20:02
sandydah. I see. Thanks!20:02
BHSPitMonkeyharris: it depends more on the ability to change the bootloader to work with ubuntu20:02
JW__Does anyone have experience running batch jobs involving parallel jobs on an SMP server?20:02
harrisBHSPitMonkey,  can i talk in pm about ubuntu20:03
guntbertmarsfligth: I cannot imagine what   "touch..." would accomplish.  Have a look at /var/log/syslog, maybe you find an error message there20:03
BHSPitMonkeyharris: no20:03
harriswhy20:03
BHSPitMonkeybecause I'd prefer not to20:03
Myrtti!pm | harris20:03
ubottuharris: Please ask your questions in the channel so that other people can help you, benefit from your questions and answers, and ensure that you're not getting bad advice. Please note that some people find it rude to be sent a PM without being asked for permission to do so first.20:03
harrisok20:03
harriswhy would you want ubuntu on a tablet  BHSPitMonkey20:04
BHSPitMonkeyharris: you wouldn't20:04
harrisdoes anyone have a tablet running ubuntu20:05
BHSPitMonkeyI'm sure some people have done it "because they can"20:05
MonkeyDusthighlite Monkey20:05
schnuffle1!ot | harris20:05
ubottuharris: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics (though our !guidelines apply there too). Thanks!20:05
drag0niuswhy when i installed dhcp3-server the services are isc-dhcp-server & isc-dhcp-server6 ?20:05
BHSPitMonkeySometimes (often) my sound driver "crashes" and no sound hardware is even visible in Sound settings anymore. Have to reboot to fix. Can anyone propose a reboot-less solution?20:05
schnuffle1BHSPitMonkey: what your sound hardware20:06
Myrttiharris: you can try #ubuntu-discuss too :-)20:06
BHSPitMonkeyschnuffle: intel HDA20:07
BHSPitMonkeyschnuffle: onboard an Intel DB65AL motherboard20:07
elbrinkehey guys20:08
schnuffle1BHSPitMonkey: maybe https://help.ubuntu.com/community/HdaIntelSoundHowto has some advice matchin your problem20:08
gordonjcphello20:09
Myrttihiya gordonjcp20:09
gordonjcpwhen I try to view a text file with a .doc extension, I get the error "No catdoc available"20:09
gordonjcpMyrtti: evening20:09
U-b-u-n-t-uwhat is the best way to uninstall unity without having a system crash20:09
gordonjcpis there a way to disable this weird behaviour?20:09
ikonia!nounity > U-b-u-n-t-u20:09
ubottuU-b-u-n-t-u, please see my private message20:09
elbrinkehow do i remove unity from 12.0420:09
ikonia!nounity > elbrinke20:09
ubottuelbrinke, please see my private message20:09
desertfiremanHello all. I have a question about installing12.04 LTS. I have bee running ubuntu on a dell latitude d505 since 9.04 and have not had any issues installing. Now with 12.04 LTS it says the kernel requires features not present on the cpu: pae and will not boot or run the os. But is I install 11.04 or 11.10 and then upgrade i's fine. My question is this: How do I install 12.04 LTS directly on the d505 ? what can I do to resolve this problem20:09
=== bwlang_ is now known as bwlang
harris#freenode20:11
Myrttigordonjcp: is it a word file or just plain text? and what do you expect to happen?20:11
gordonjcpMyrtti: it's plain text, and I expect to see plain text20:11
U-b-u-n-t-uikonia, I already installed gnome... I want to know how to remove unity without messing up my system20:11
gordonjcpU-b-u-n-t-u: it's probably not worth the effort20:11
U-b-u-n-t-ugordonjcp, ok20:11
desertfiremanHello all. I have a question about installing12.04 LTS. I have bee running ubuntu on a dell latitude d505 since 9.04 and have not had any issues installing. Now with 12.04 LTS it says the kernel requires features not present on the cpu: pae and will not boot or run the os. But is I install 11.04 or 11.10 and then upgrade i's fine. My question is this: How do I install 12.04 LTS directly on the d505 ? what can I do to resolve this problem20:11
U-b-u-n-t-uit looks like it would get messy20:11
ikoniaU-b-u-n-t-u: the link explains how to remove unity20:11
MonkeyDust!repeat| desertfireman20:12
ubottudesertfireman: Don't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. While you wait, try searching https://help.ubuntu.com or http://ubuntuforums.org or http://askubuntu.com/20:12
desertfiremanno the channel closedo n me and I had to log back in20:12
U-b-u-n-t-uikonia, if it did I didn't see where20:12
JW__Where might be a good resource to go to find more information on running batch parallel jobs on an SMP server?20:12
desertfiremanI wasn't sure if my question posted20:12
ikoniaU-b-u-n-t-u: my apologies I thought there was a link in there also showing how to remove the unity package20:13
GalvatronU-b-u-n-t-u: Start with installing either GNOME Shell or GNOME Classic (gnome-session-fallback). The just "sudo aptitude purge unity".20:13
U-b-u-n-t-uikonia, it seems to tell me how to install gnome and use it instead of unity20:13
U-b-u-n-t-uikonia, np20:13
ikoniaU-b-u-n-t-u: once you've installed gnome you can remove the unity shell20:13
ikoniaU-b-u-n-t-u: be careful not to remove the dependencies20:13
U-b-u-n-t-uikonia, that is what I am worried about20:13
ikoniaU-b-u-n-t-u: as long as you pay attention to the info on screen it shouldn't be a problem20:14
copelloHello, I changed the repository of gnome-shell (sudo add-apt-repository ppa:ricotz/testing), now i just can download the gnome-shell3.5.3 but there is no extensions for this version, how do I install gnome-shell3.4 again?20:14
GalvatronU-b-u-n-t-u: "sudo apt-get install gnome-shell gnome-session-fallback"20:14
U-b-u-n-t-uI was using unity and I installed gnome and my load levels went from maxed out (unity) to almost nothing (gnome) I assume it was a grapics driver issue but I dont know20:14
JW__It would be nice if there was some package that you could install that would simply analyze your system and remove Unity for you without messing up the dependencies.  Is there such a thing?20:14
Myrttigordonjcp: looks like less is trying to be too smart, looks like there's an old closed debian bug for it. I trust you've already tried renaming the file to not have the file extension?20:15
gordonjcpJW__: I think it's called xubuntu.iso ;-)20:15
gordonjcpMyrtti: yeah, but that's not a solution20:15
JW__What is xubuntu?20:15
gordonjcpJW__: it's Ubuntu with XFCE desktop instead20:15
U-b-u-n-t-uGalvatron, I have installed gnome. will fallback remove unity without messing up my login etc20:15
schnuffle1JW__: https://wiki.archlinux.org/index.php/TORQUE might be of interest20:15
gryI forgot where we left off but I have commented everything in '/etc/network/interfaces' and set NManager managed to true, issue persists20:15
K-Labhi all20:16
copellocan somebody help me?20:16
grywith what20:16
Gygesno20:16
GalvatronU-b-u-n-t-u: You can absolutely safely remove Unity once you have a different shell20:16
isitme!please | copello20:16
ubottucopello: Avoid following your questions with a trail of "Please, help me", "Can nobody help me?", "I really need this!", and so on. This just contributes to making the channel unreadable. If you are not answered, ask again later; but see also !repeat and !attitude20:16
schnuffle1JW__: http://debianclusters.org/index.php/Resource_Manager:_Torque20:16
gordonjcpMyrtti: installing catdoc does, uh, weird stuff ;-)20:16
U-b-u-n-t-uGalvatron, what has me concerned is this site http://askubuntu.com/questions/83333/can-unity-be-uninstalled20:16
=== lubmil is now known as lubmilk
GalvatronU-b-u-n-t-u:: Just make sure to set a different shell as your default session20:17
Myrttigordonjcp: I'm not surprised.20:17
gordonjcpMyrtti: it's a text file but it obviously isn't "text enough" for less to stop trying to pass it to catdoc20:17
U-b-u-n-t-uit says its possible to uninstall some parts of unity that will crash the login etc20:17
copelloHello, I changed the repository of gnome-shell (sudo add-apt-repository ppa:ricotz/testing), now i just can download the gnome-shell3.5.3 but there is no extensions for this version, how do I install gnome-shell3.4 again?20:17
JW__schnuffle, I saw Torque but that looks like a giant pain in the ass, plus I only have one server, not a network of separate machines.  I was hoping there would be some simpler solution that would be useful on a single SMP server.20:17
gordonjcpMyrtti: catdoc then does pretty much what you'd expect an overenthusiastic cat to do to something it doesn't recognise, and a short time later a chewed mauled pile of bits emerges20:17
isitme!repeat > copello20:18
ubottucopello, please see my private message20:18
GalvatronU-b-u-n-t-u: Just look if the system is not trying to uninstall the "lightdm" package (LihghtDM is the login screen).20:18
rrrrHello folks!20:18
elspuddyany one know where the error log file is for gparted ?20:19
U-b-u-n-t-uGalvatron, ok20:19
IdleOnecopello: did you sudo apt-get update - afther adding the PPA?20:19
Galvatron!question | rrrr20:19
ubotturrrr: Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience20:19
JW__Is it possible to switch from Ubuntu to Xubuntu without having to reformat everything?20:19
IdleOneafter*20:19
U-b-u-n-t-uthank you ikonia  and Galvatron20:19
bekksJW__: Sure. "sudo apt-get install xubuntu-desktop"20:19
schnuffle1JW__: how is a job in your env defined compilation maybe distcc could or is it more sort of compute jobs?20:19
rrrrI am memTesting a computer and this machine just turns off in the middle of the test. What could be happening?20:20
GalvatronJW__: "sudo apt-get install xfce4"20:20
JW__schnuffle, they are compute jobs, using pre-compiled and commercial software20:20
copelloIdleOne:  yes, i tried to remove the repository and install again, but it didn't work.20:20
bekksrrrr: Power failure, hardware problem.20:20
IdleOnerrrr: over heating, more help in ##hardware.20:20
gordonjcprrrr: overheating?20:20
daoneunvThis is frustrating now.. Still can't get it to work.20:21
IdleOnecopello: are you getting any errors?20:21
daoneunvI have the gnome-shell-extension installed.. but when I go to advance system settings its not there..20:21
daoneunvIt's asking me to install..20:21
GalvatronJW__:: The "Xubuntu-desktop" installs XFCE with all the apps, while what I gave you is just the XFCE itself (you can add things later).20:21
rrrrI don't think it is overheating because the machine don't stay 10 minutes until it turns off.20:21
IdleOnerrrr: That could very well be a heat issue.20:22
JW__Galvatron, okay, and if I do "sudo apt-get install xubuntu-desktop" it will automatically switch over from Gnome to XFCE?20:22
rrrrbut I think I will have a #hardware opinin as well.20:22
JW__and it will get rid of Unity?20:22
bekksJW__: No. It will install xubuntu-desktop.20:22
rrrrIdleOne, ok, how lond it takes to a computer turn off in a heat issue?20:22
copelloIdleOne: not now, because I added the repository again, and installed the gnome-shell but its version is 3.5.3, and I want the 3.420:22
IdleOnerrrr: depends how long it takes for it to over heat20:23
GalvatronJW__: It will install XFCE alongside GNOME20:23
JW__well I guess I'll try it although I am nervous that it will mess up my system20:23
rrrrIdleOne, yes, but durring a memTest process the machine will take a while, no?20:23
IdleOnecopello: if you are using the testing repo then you will get the most recent version in that repo. search for a repo with the version you want.20:23
copellook, I'll try20:24
IdleOnerrrr: the memtest can take several hours.20:24
zainwhat does LTS mean?20:24
GalvatronJW__: For starters, just do the "sudo apt-get install xfce4", to get just the XFCE desktop alone20:24
IdleOnezain: Long Term Support20:24
rrrrIdleOne, and what could be causing an overheating isssue?20:24
IdleOnerrrr: ##hardware would be better suited to help with that20:25
zainIdleOne: thanks!20:25
isitmerrrr: fan not working, fan clogged with dust, cooler not properly attached to the cpu,...20:25
GalvatronJW__: Alternatively you might try installing Xubuntu on a different partition20:25
rrrrMmmm. ok. Thank you. I will have a look on it.20:26
bluegoonHello20:26
daoneunvI have an Intel Wifi Link 5100 installed.. That's under the chipset wglan.20:26
JW__Okay well back to the batch scheduling question.  So are my only two options then Torque or Batch/At/Atd?20:26
bluegoonIs there a room where the various apps of ubuntu is discussed?20:27
daoneunvHowever.. when I lspci -v20:27
daoneunvIt tells me that20:27
bluegoonLike recommendations etc?20:27
daoneunvKernel driver in use: iwlwifi20:27
daoneunvKernel modules: iwlwifi20:27
FloodBot1daoneunv: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.20:27
daoneunvThis is resulting in very slow20:27
daoneunvbrowsing and downloading20:27
daoneunvHow can I fix this?20:27
bluegoonDude, you're flooding.20:28
daoneunvCan someone answer me?20:28
isitme!enter | daoneunv20:28
Galvatron!flood | daoneunv20:28
ubottudaoneunv: Please try to keep your questions/responses on one line. Don't use the "Enter" key as punctuation!20:28
ubottudaoneunv: For posting multi-line texts into the channel, please use http://paste.ubuntu.com | To post !screenshots use http://imagebin.org/?page=add | !pastebinit to paste directly from command line | Make sure you give us the URL for your paste - see also the channel topic.20:29
isitmebluegoon: there is #ubuntu-offtopic and ther is #ubuntu-discuss20:29
isitme*there20:29
bluegoonisitme, thanks20:29
=== xazax is now known as Guest57640
xxiaoi need a light-weight editor, lighter than abiword, to do basic font-bold/italic etc, is there a one?20:33
ChandlerBingI'm having difficulty getting my wireless adapter to connect to my router in lucid lynx20:33
xxiaonot for coding, but if i can highlight syntax that will be good too20:33
ChandlerBingI was able to get it to connect by running boot-repair and adding acpi=off20:34
xxiaobold, underline, italic, that's it20:34
ChandlerBingbut then the system froze while downloading security updates20:34
daoneunvDoes anyone know the answer to my question?20:34
ChandlerBingI've tried redoing boot repair to no avail20:34
jthanxxiao: if you could skip the bold/italic/underlining you could use vim which supports syntax hilighting. Then you could go back with another editor and do your formatting.20:35
jthanxxiao: Also, emacs probably provides it out of the box.20:36
jthanThough some people feel there is a large learning curve associated with it.20:36
GalvatronChandlerBing: Have you tried other versions/systems?20:37
jthandaoneunv: PM me with a specific question and I will try to help you. No guarantees.20:37
ChandlerBing@Galvatron:  I have not20:37
nevezenwhat windows tool should I use for writing ubuntu iso's onto usb flash drives?20:38
GalvatronChandlerBing: Has it started just recently, after some updates?20:38
jthannevezen: What version of windows? Windows 7 has functionality built in.20:38
nevezenwin7 does?20:38
=== tommy_ is now known as Guest79276
GalvatronChandlerBing: Have there been any kernel updates recently?20:39
jthanYes - if you right click the .iso you should be able to select the option. If you are not on windows 7 I like iso recorder20:39
=== rymate12- is now known as rymate1234
ki4rodaoneunv: What is your question?20:39
ChandlerBingI was able to connect after adding acpi=off to the kernal, then it crashed after attempting to d/l security updates20:39
ChandlerBingand it hasn't worked since20:39
nevezenI've been using unetbootin but it seems it doesn't work with two ubuntu images I downloaded..20:40
ChandlerBingIt's a new install, I'm wondering if I should just start with a fresh install?20:40
=== bwlang_ is now known as bwlang
lacrymologyhow to install php curl extension?20:40
GalvatronChandlerBing: To tell the truth, I recommend trying Kubuntu 12.04 (Unity, Compiz and LightDM in Ubuntu 12.04 are anything but stable - in 12.10 maybe)20:40
bekkslacrymology: apt-get install php5-curl (iirc)20:41
GalvatronChandlerBing: What's your machine?20:41
xxiaojthan: i'm a vim-er20:41
jthanxxiao: Good man :-p (or woman)20:41
xxiaoneed write some documents (notes) other than coding20:41
lacrymologybekks: thanks. And how can I unmark as manually installed a package, do you know?20:41
ChandlerBingGalv, home-built AMD.  Socket AM2 on an asus mobo20:41
jthanxxiao: LaTeX?20:41
nevezenit writes those images fine but upon loading syslinux, it hangs20:42
xxiaojthan: lynx is the one i'm thinking...latex/lynx are in general heavier20:42
xxiaomaybe just a html editor will cut it, anyway thanks20:42
GalvatronChandlerBin: And the GPU?20:42
jthanxxiao: Lynx is a web browser.20:42
FreeNslavedits a sad day when someone is considering installing windows cause 12.04 has them flustered and bugged out20:42
trismjthan: probably means lyx20:42
xxiaolyx that is, sorry20:42
ChandlerBingWhatever embedded on the mobo, I think it's nvidia20:43
jthanAh, yeah. My bad.20:43
GalvatronFreeNslaved: It's Cannonical's fault for packing it up with an unstable stuff I mentioned. That's why recommend Kubuntu instead.20:43
trismxxiao: vim + pandoc is a pretty good combo (write in markdown, compile to whatever), retext seems pretty light too (just browsing through the repo)20:44
GalvatronFreeNslaved: Compiz 0.9.x should have never maid it to the stable branch in the forst place.20:44
jaminanyone got time to help debug why partman-auto/method crypto fails claiming there is no physical volume defined in the volume group when the same recipe works fine with partman-auto/method lvm?20:45
=== eshaffer_ is now known as ees
GalvatronChandlerBing: Should be ebough, although gettingg some GT 520/630 will give a hardware video and Flash acceleration20:45
Galvatron*62020:45
xxiaotrism: the purpose is wysiwyg20:46
xxiaotrying bluefish now20:46
* xxiao wants simple font changes while writing quick tech notes20:46
=== rymate1234_ is now known as rymate1234
GalvatronChandlerBing: Anyways, try Kubuntu 12.04.20:47
ChandlerBingok, thanks, Galv20:48
GalvatronChandlerBing: KDE 4.8.x it uses is a mature and stable enviroment, just unlike Unity20:48
GalvatronAnd it's very powerful, as well as feature-rich20:48
rymate1234I like unity20:49
rymate1234I prefer gnome 320:49
bluegoontest20:50
LNikonexit20:52
Galvatronrymate1234: I would love to u be able to use Unity - I'm a big fan of the Apple-styled interfaces -  but it has too many issues.20:52
rymate1234...like?20:52
IdleOneGalvatron: can you take this conversation to #ubuntu-discuss please. Not really support related20:53
bk_hi everyone20:53
GalvatronThe stability of Compiz, broken "Scale" for all desktops and some other.20:53
GalvatronIdleOne: OK20:53
IdleOneThank you.20:53
thyshi20:55
jthanthys: Hey20:55
thysI keep losing my connection though SSH on my ubuntu server. It works fine while I use it then it freezes and I have to eject it and log in again. How do I find the keep-alive settings?20:55
=== bwlang_ is now known as bwlang
jthanthys: http://www.howtogeek.com/howto/linux/keep-your-linux-ssh-session-from-disconnecting/20:56
mongyGalvatron, there is a ppa to fix the scale bug.  Have they not fixed that yet?  It's quite an old bug now.20:56
bluegoonHow do I upgrade from 11.10 to 12.04?20:58
IdleOnebluegoon: sudo do-release-upgrade20:59
jthanbluegoon: http://askubuntu.com/questions/110477/how-do-i-upgrade-from-10-04-or-11-10-to-12-0420:59
|Long|what is the key to boot on recovery mode when it bootup?20:59
lrcaballerohas any body tried the equalizer plugin for Rythmbox as recommended in this site: http://www.iheartubuntu.com/2010/08/howto-equalizer-in-rhythmbox.html20:59
bluegoonTHank you20:59
jthan|Long|: Press escape when you see GRUB is loading21:00
jthanThen there will be a line to select recovery mode21:00
|Long|jthan, thanks21:00
jthanAnytime.21:00
alankilafunny UI fail on that equalizer, the labels for sliders are all crammed together21:00
jthan|Long|: depending upon your system you may have to hold the left shift instead of pressing escape.21:01
Galvatronmongy: No, but now Compiz at least works with KDE21:01
Galvatronmongy: At least the version from the "Proposed" repo21:02
Galvatronmongy:  Do you maybe know this PPA?21:02
mongylemme see21:03
zykotick9jthan: |Long| fyi it's shift with grub221:03
jthanzykotick9: I should know that :-x21:03
mongyGalvatron, https://launchpad.net/~bsantos/+archive/ppa21:03
GalvatronGreat21:05
GalvatronCompiz + KDE again :D21:05
GalvatronGoodbye laggy Kwin.:)21:05
=== bwlang_ is now known as bwlang
Platypus-Mancan I use hdd's bigger than 1 TB (4K sector drives) out of the box, or do I need to realign them? I am going to use the drives for storage, when I googled I only found forum threads talking about issues with booting from them21:12
Vic_Hi, I need some help :). Windows crashed today with a reg error and wont start anymore...and now I want to recover the data from my hds...so I created an ubuntu boot disk. The problem is that the two hds are in raid-0, and I cant get the disks mounted in ubuntu21:13
mblack72install linux :)21:14
Vic_yes, I have linux installed, the problem is that I need the data from these two disks in raid 021:14
ikoniaVic_: the windows recovery CD would be better suited21:14
Vic_I dont run linux on that particular machine, because the software I use there is not supported in linux21:14
ikoniaVic_: you can load the fake raid controller drivers into the environment21:14
Vic_I tried, but I get this error:21:14
nannes /google mount raid hdd ubuntu21:15
nannes /google mount raid hdd ubuntu21:15
nanneshttps://help.ubuntu.com/community/AutomaticallyMountPartitions21:15
FloodBot1nannes: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.21:15
ikonianannes: please stop that21:15
ikonianannes: fake raid is not straight forward.21:15
Vic_wrong # of devices in RAID set "JMicron_GRAID"21:15
ikoniaVic_: it would appear you have corruption, in which case, your data is gone21:15
Vic_the disks are still fine as far as I can tell21:15
ikoniaVic_: is it possible one of the drives has died21:15
Vic_ran self-test on them21:15
ikoniaVic_: it certainly sounds like one has died, or at least become corrupted21:16
ChurchVic_ : your raid0 was software raid created with md, or with some raid adapter?21:16
ikoniaChurch: it's fake raid controller in windows,21:16
ikoniahe's trying to recover the data21:16
ikoniayou'll find that if the Windows recovery environment with supported driver isn't working, you're out of luck21:16
Vic_can the disk still be corrupt/damaged if self-test succeeds?21:16
ikoniaVic_: sure, the file system is different from physical drive21:17
Vic_yeah, I am starting to fear it might be unrecoverable...really wished I did not use raid now, but the machine is quite old...was popular back then :(21:17
ikoniaVic_: the guys in ##windows may have some tricks21:17
Vic_thanks ikonia21:18
Datastream111Hey noob question here. I've just installed/in the process of installing ubuntu on my single coore 2.4ghz comp and it shows me the desktop, but the loading icon is spinning. Has it fully installed or is it doing everything in the background? I can poke around all the files and such, its just the loading icon is still spinning so I'm unsure what it's doing.21:18
ChurchVic_: i'm guessing, that linux now sees those drives as separate ones. you can try getting linux drivers for that fakeride, and hope that their ondisk format is same as created/used with windows driver, but best bet would be to attach card and disks to some windows box and transfer/backup elsewhere data, be it normal disks or over network21:18
Churchs/fakeride/fakeraid/21:18
ikoniaDatastream111: if it's spinning, it's doing something, probably swapping out the cd21:18
Datastream111ikonia: oks thanks. That's all I really needed to know haha21:19
Vukkhey masters! The newest ubuntu release support fully Lenovo y580 or i wait some months?21:21
poseidonanyone here know why go syntax hilighting would be working with vim on ubuntu?21:21
poseidonI had my friend put the go.vim in ~/.vim/syntax21:21
poseidonand then :filetype on and :syntax on21:21
ikoniaVukk: hardware support for a device won't change21:21
poseidonbut it doesn't seem to owrk21:21
Vic_Church: I am not sure anymore, it is a while back, but it is on a gigabyte motherboard..As far as I can tell/remember I setup the raid in a control screen before windows starts. I can still access that screen. But I fear that any changes I make there will result in a loss of data.21:21
ikoniaVic_: wise21:21
hidHi all. I'm on ubuntu 12 (laptop) and I can't change brightness configuration, contrast... how can I do ? My eyes'll thank you21:22
zykotick9poseidon: (just a guess) but have you installed the real vim (or are you using the default vim-tiny)?21:22
VukkThx Ikonika!21:22
poseidonzykotick9: he installed vim21:22
zykotick9poseidon: ok - just checking (i hate vim-tiny).  sorry i have no real suggestions.21:23
poseidonnp21:23
Vic_ikonia: I did try the windows recovery process, but it is not recognizing the HDs, so I probably need to find the specific drivers somewhere. Thought I would give ubuntu a shot, because it gives more control in these situations21:23
poseidonfor some reasons if I drop in my .Xdefaults and .vim + .vimrc, nothing really changes as far as color in his terminal21:23
ikoniaVic_: it gives no more/less control than Windows21:24
elspuddyquestion, is there an easy way of transfering all of my stuff from one unbuntu box to another ?21:24
=== iassad is now known as somenickname
ikoniaVic_: if anything it's more risky, using a zero supported reverse engineer driver, on a reverse engeineered file system, rather than a fully supported OS with supported signed controller driver and native file system21:24
zykotick9poseidon: i always need to use the filename .Xdefaults-HOSTNAME21:24
Vic_ikonia: I did use this command : sudo mdadm --build /dev/md0 --chunk=64 --level=0 --raid-devices=2 /dev/sdd2 /dev/sdc21:25
=== somenickname is now known as somenewnickname
ikoniaVic_: no non nono21:25
ikoniaVic_: please don't tell me you've run that21:25
poseidonzykotick9: that is weird.....21:25
Vic_ikonia : I did, did I kill it with that?21:25
ikoniaVic_: yes, totally21:25
ikoniaVic_: you've just created a new software raid array21:25
ikoniathat's a linux only software raid array21:25
Dan-mchey is there a way to get my windows hdd to access my ubuntu hdd to pull some data or am i going to have to restart into ubuntu21:26
Vic_hmmm, dont think it is linux only. http://ubuntuforums.org/showthread.php?t=833653&highlight=dynamic+disk21:26
ikoniaDan-mc: the windows ext file system drivers, are unstable21:27
ikoniaVic_: mdadm IS linux only21:27
cid420DeLorean: #ubuntu (Client Quit)21:27
xyiбгг21:27
cid420my bad21:27
cid420is there a good tutorial on setting up INN ?21:27
xyiжэстчайшэ21:28
xyiрусский кто-нибудь знает?21:28
fbhDefinitely!21:28
cid420not understanding that zyi21:28
cid420xyi21:28
darth_barius!list21:29
ubottudarth_barius: No warez here! This is not a file sharing channel (or network); read the channel topic. If you're looking for information about me, type « /msg ubottu !bot ». If you're looking for a channel, see « /msg ubottu !alis ».21:29
xyiэууууууу21:30
xyiменя никто не понимает, да?21:30
ikonia!ru | xyi21:30
ubottuxyi: Пожалуйста наберите /join #ubuntu-ru для получения помощи на русском языке. | Pozhalujsta naberite /join #ubuntu-ru dlya polucheniya pomoshi na russkom yazyke.21:30
ben64-droidyjust upgraded from 10.04 to 12.04, cant login now. i type user and password, the screen blanks, and a couple seconds later i am shown the login screen again21:33
drag0niushow do i configure dhcp server on 12.04?21:37
drag0niusnot a single tutorial i found fits21:37
SebbohHow can I change the console resolution in lucid at runtime?21:37
=== Guest57640 is now known as xazax_
kristenbhi. I have a question regarding iptables. If I intercept a IP packet in prerouting, and then for all intercepted packets, I create a raw packet destined to myself (my ip address), will it be intercepted again ?21:38
jthandrag0nius: dhcpcd <interface>?21:40
victor__holaaaaaaa21:41
=== kristenb is now known as kristenc
marwoltukHi, does someone know how to configure grub2?21:42
elspuddyany one know how i can change permitins on a drive, i.e root owns the drive but i want my user to have access to it21:42
ben64-droidyjust upgraded from 10.04 to 12.04, cant login now. i type user and password, the screen blanks, and a couple seconds later i am shown the login screen again21:42
zykotick9marwoltuk: see /etc/default/grub for most options21:42
ben64-droidyand my network card is not working -- rtl8111/8168b21:43
zykotick9marwoltuk: not forget "sudo update-grub" to apply any changes21:43
marwoltukI just installed another linux installation on an extended partition and the only thing i want to do is to make it boot from the grub inside the ubuntu on a primary partition...21:43
zykotick9marwoltuk: just "sudo update-grub" might do that21:44
drag0niuswhat should i set on domain-name and domain-name-servers (some real-life example) in dhcpd.conf?21:45
drag0niushmm how do i paste stuff in Putty? i had it under right click mouse, but now it's visual mode in vim on right click21:46
Sebbohdrag0nius, depends on the details of your network, but for a home network, local is a good domain name.  for domain-name-servers, for a home network, you can set it to the same IP address(es) listed in /etc/resolv.conf on a computer that can currently access the internet normally.21:47
=== Gyges is now known as o0o0
marwoltukzykotick9: thanx, it did it's job. didn't expectet that. seems im still used to grub1.21:48
Sebbohdrag0nius, PuTTY has configuration options for that...  But, try middle click, and when the running console application changes paste behavior, use shift to counteract that.21:48
ben64-droidyjust upgraded from 10.04 to 12.04, cant login now. i type user and password, the screen blanks, and a couple seconds later i am shown the login screen again21:48
ben64-droidyand my network card is not working -- rtl8111/8168b21:48
=== Granis` is now known as Granis
=== kristenIHYE is now known as kristenbb
drag0niusSebboh: so basically i set up DNSes to google? :)21:49
tdhz77It takes my keyboard and mouse about 30 seconds to start working after kernel update 3.x.25? Does anybody know any information on this?21:50
drag0niusand how do i copy from vim with putty?21:55
=== bwlang_ is now known as bwlang
drag0niusyanking/selecting etc gets just topmost line21:56
ajeffridrag0nius: to select lines in vim, use the yy command on the line you want to yank. To yank two lines, use 2yy, 3 lines 3yy, etc. To paste, use p to paste below the current line and P to paste above. This works in any terminal emulator.22:00
drag0niusyeah but it does not get to clipboard outside Putty22:00
ajeffrioh22:01
ajeffrisorry22:01
gr33n7007hwhat is the bluetooth channel22:01
ajeffriIn the past, I've just click&dragged the text I wanted. Putty will automatically copy it to the clipboard, at least under windows. Not sure what the Linux version does.22:02
drag0niusye, but this one does not work inside vim ;)22:02
drag0niusoutside its perfectly fine22:03
ajeffriAnd then pasting happens with right-click22:03
ajeffriok...not sure why you are having a problem. I've copied and pasted to and from VI/vim sessions before in putty.22:03
ajeffriwish I could help you22:04
drag0niusright click does not work for me with pasting22:04
drag0niushave to use middle22:04
meisth0thhello, is there anybody has experience with python gi.repository.Gio.File ?22:04
trismdrag0nius: seems "*yy works (likewise 2"*yy, etc), then you can middle click it22:04
drag0niusidk what i did that it stopped22:04
ajeffrihmmmm...dunno. that's a puzzler.22:05
drag0niushow do i start eth1 if its not running already?22:05
ajeffriifup eth122:05
AaronMT!hedgy22:11
=== rob is now known as Guest61319
=== bwlang_ is now known as bwlang
drag0niushttp://pastebin.com/yWYhv7iy whats wrong with line 2? i get "semicolon expected" error when starting dhcpd22:12
arooni-mobilesomehow i think my name servers are messed up.  wget: unable to resolve host address `rubyenterpriseedition.googlecode.com' ... and "host cnn.com" => ;; connection timed out; no servers could be reached ... how would i fix this ?  ubuntu 10.04 lts22:13
o0o0a config file that gets overwritten is /etc/resolv.conf22:14
arooni-mobileo0o0, yes i know resolv.conf is overwritten22:15
drag0niusIgnoring unknown interface eth1=eth1. what the heck?22:15
MonkeyDustdrag0nius  look in /etc/network/interfaces   see if eth1 is there22:16
drag0niusnope22:17
drag0niuswhat to put there if i want use wlan0 and eth1 for DHCP server?22:17
drag0niusi quite dont get htat iface part22:17
MonkeyDustdrag0nius  this is not it, but look at this to get an idea http://manpages.ubuntu.com/manpages/maverick/man5/vlan-interfaces.5.html22:19
ignaciohopla22:22
ignaciohola22:22
drag0niusits static everywhere, i just dont know how should i configure it to work as server22:22
ignacioalgien me puede ayudar?22:22
drag0niusfound some examples for dhcp clients but none for servers22:22
ignacioplease22:22
ignacioayudenme22:22
ignacioreport bug xubuntu nvidia-9622:22
Fuchs!es > ignacio22:22
ubottuignacio, please see my private message22:22
MonkeyDustdrag0nius  is this useful http://www.howtogeek.com/howto/ubuntu/change-ubuntu-server-from-dhcp-to-a-static-ip-address/22:24
ignacioubuntu-es is bad...22:24
ignacio:(22:24
BlouBlouignacio: I agree22:24
BlouBlouignacio: you can submit a bug by using launchpad22:24
BlouBloubut check if that bug exists before doing it22:24
OerHeksignacio, you may file a bug for nvidia-96. but i think that reporting about a closed source driver is useless.22:25
drag0niusthe thing is there are dhcp clients setups everywhere, none is labeled "use this to setup DHCP Server on ethN"22:25
drag0niuseveyrthing "use this to setup as dhcp client"22:25
BlouBlouignacio: if that driver works bad for you, use nouveau drivers22:25
SomelauwDoes anyone else notice that in evince after a while shortcuts stop working?22:25
ignacio:(22:25
BlouBlou!nouveau | ignacio22:25
ubottuignacio: nouveau is an open-source nvidia driver included by default since Ubuntu 10.04. Currently, 3D rendering is only partially supported. More information can be found at http://nouveau.freedesktop.org/wiki/ | See !nvidia for the closed-source Nvidia driver.22:25
ignaciowith the nouveau hopefully doing the tremulous me: (22:26
Somelauwevince, the pdf view22:26
BlouBloudoes nouveau support 3D acceleration?22:26
BlouBlouit didn't a year ago22:27
ignacioas is the bug report page for xubuntu?22:27
nessushola22:28
ignaciohola22:28
ignaciohablas español?22:28
nessussi22:28
ignaciosaves sovre xubuntu?22:28
ignaciosobre*22:29
MonkeyDustdrag0nius  i found a german link22:29
drag0niusgimme, maybe will help22:31
MonkeyDustdrag0nius  scroll down http://www.supernature-forum.de/alles-rund-um-linux/58982-ubuntu-wlan-karte-msi-pc54g3.html22:32
OerHeksignacio if your bug is nvidia-96 is not installing, that is correct, it does not support xorg 1.10 and up22:32
=== o0o0 is now known as Cottus
drag0niusbasically i have 100 mb/s card for WAN and wanna use 1 gbit card + wlan card for lan22:34
SomelauwWell, I think I'll switch back to zathura.22:40
drag0niusis there anything against running few putty terminals connected to same user on same server? ;d22:44
cid420nope22:44
elspuddyhow do i chance permistion on a drive ?22:45
cid420i would like to install INN server, is there any decent tutorials on the matter?22:45
V3NG3NC3678Hello22:45
abimaelfirst programming language??     Python or RUBY?22:45
cid420V3NG3NC3678: Hello22:45
V3NG3NC3678Anyone intrested in moddified hardware pm me22:45
L3topabimael: bash    but polling is forbidden in chan.22:46
goddardhow are banshee and rythmbox even competitors?  can rythmbox even play videos?22:46
V3NG3NC3678Hi CId22:46
abimaelok thanks, my apologies22:46
L3topno worries... don't know until you know.22:47
goddardabimael: php or python22:47
abimaelthanks L3top22:48
profiler1982its possible to install unity 5 on 11.1022:49
V3NG3NC3678Moddified Hardware anyone intrested?22:49
OerHeksV3NG3NC3678, do you have an ubuntu support question?22:50
profiler1982or is anythere somewhat app to imitate  the HUD in gnome shell22:50
L3topV3NG3NC3678: that isnt how ubuntu support works. You either have a support question, or answer. Modding HW is not an acceptable troll22:50
lrh9I want to use my Netgear WNA3100 with Ubuntu 64-bit using NDISwrapper. I am reading the NDISwrapper page for my specific device, and it only has a link to download the 32-bit driver (bcmwlhigh5). Can I use the 32-bit driver with 64-bit Ubuntu, or do I need to locate bcmwlhigh6? http://sourceforge.net/apps/mediawiki/ndiswrapper/index.php?title=Netgear_WNA310022:50
V3NG3NC3678I support ubuntu,.. and moddified hardware to enhance the ussage of it22:50
L3topNo22:50
makaro0nhi22:50
L3topWhat you do is specifically NOT supported by this channel V3NG3NC367822:50
OerHeksV3NG3NC3678, join #ubuntu-offtopic for that.22:51
L3top:)22:51
MoPacFull-disk LVM encryption question: is there an easy way to back up the bootloader, the way you can with TrueCrypt, in case it gets corrupted or erased?22:51
cid420is there a good tutorial on setting up INN ?22:51
profiler1982join #ubuntu-offtopic22:51
L3topMoPac: I would use cloning software like clonezilla22:52
MoPacL3top: Would I have to clone the whole disk, or is there a way I can just make a rescue bootloader on a USB?22:52
akemMoPac, what do you mean about Truecrypt?22:53
ufrgsllo folks!22:53
s12ahello. I installed ubuntu 12.04 on a pc with an amd 2.6 ghz dual core processor, nvidia nforce 430 integrated graphics, 3GB ram, 64 GB samsung ssd. the interface (unity) feels kind of laggy, unresponsive. is there some tweak to make it more enjoyable to use?22:53
V3NG3NC3678Let me tell you something,... I spent years tracking down components to use Linux-ubuntu only to find that if it's not one thing or another. I have repedetly asked for help when no one could and I finally made a product I am helpign others with how is that wrong? Personally I don't thing most of the people who use ubuntu know even what chipsets to use. I prollyknow more then you, so I am trying to offer assistance to everyone that22:53
V3NG3NC3678wants to use ubuntu. SO,... what part of ubuntu "spoort" does that not fall under22:53
V3NG3NC3678?22:53
ufrgsHello folks!22:53
subz3r0akem, hes talking about the "rescue-disk"22:53
MoPacakem: With Truecrypt, you can make a Rescue .iso file that will boot your encrypted filesystem if your loader gets fucked22:53
ufrgsHow do I resume a Stopped process at Terminal please?22:53
abimaels12a: Update kernel, install preload, update & upgrade system in terminal22:53
s12aabimael: already running the latest updates22:54
IdleOneMoPac: no cursing please22:54
MoPacIdleOne: Sorry22:54
abimaels12a: and run Bleachbit, make sure you have proprietary drivers installed too, in settings22:54
=== dh__ is now known as darkheart
V3NG3NC3678YOu tell me what chipset are most functional and I'll stop,.. other wise I consider what I have to offer an open source addittion as it states on my cd from MARK that I can mod this anyway I choose22:54
s12aabimael: proprietary drivers installed as well22:54
ufrgsgot it. thank you.22:54
s12aI'll check this bleachbit22:54
akemMoPac, ha ok "backup volume header" i guess, didn't know about it.22:54
abimaels12a: you got the 3.4 kernel?22:55
s12aabimael: not sure, let me check22:55
MoPacakem: Any equivalent for the full-disk solution that comes with the Ubuntu alternate install?22:55
OerHeks!hardware > V3NG3NC367822:56
ubottuV3NG3NC3678, please see my private message22:56
n1ckn4me09876543anybody know a program like Bing Desktop ? I'd like my wallpaper to change everyday22:56
abimaels12a: try switching between unity and unity 2d, as well, and if all else fails, try Gnome or Cinnamon, but with the updated kernel, you honestly should be fine, my specs are lower than yours and my 12.04 runs fine22:56
WManhttp://xptk.phpyjs.com/ntk.zip22:57
s12aabimael: I'm running 3.2.022:57
akemMoPac, i don't know22:57
s12aabimael: tried that too, no change22:57
goddardn1ckn4me09876543: probably just a shell script and a cron job could do it22:57
goddardn1ckn4me09876543: that is if you have a reliable photo source22:57
MoPacakem: subz3r0: L3top: I'm also interested in knowing how to modify other settings, change the volume password, etc. - not sure where to go from within the os22:58
s12aabimael: it's not that it doesn't run fine. I'd say that performance is acceptable. however I previously had windows 7 on this pc and the gui felt more responsive22:58
abimaels12a: go to google and type ppa kernel, scroll down to v3.4-precise/, and then download all the files that end in AMD22:58
s12athere's some kind of lag every time I click something22:58
goddards12a: in Unity?22:58
s12ait's small (a few fractions of seconds), but can be felt22:58
s12aunity, yes22:58
s12aabimael: I'll try that22:58
subz3r0MoPac, changing the pass is easy... but i would recommend to make a second pass. check if it works and then delete the old one :)22:59
goddards12a: try tweaking the settings22:59
abimaels12a: and the linux headers all deb22:59
goddards12a: some of those "fade ins" I actually turn off22:59
MoPacsubz3r0: Where do I change teh pass?22:59
abimaels12a: once you have them in your downloads, go to terminal type sudo dpkg -i linux*.deb and then go to synaptic, type in linux kernel and linux headers and uninstall 3.2 kernel files, then reboot and you should be good22:59
s12agoddard: the settings menu is quite limited, do I have to download something to tweak them?23:00
MK13What would cause iptables-save to not produce the options for entries that use --contrack?23:00
s12aabimael: I'll check that out, but does a kernel update really change speed that much?23:00
subz3r0MoPac, sudo cryptsetup luksAddKey /dev/sdX223:00
subz3r0and sudo cryptsetup luksDelKey /dev/sdX2 123:01
abimaels12a: yes because it fixes bugs and patches and stuff like that, so yes an updated kernel can have profound affects bcuz it makes everything run23:01
subz3r0be aware.... add a new one, test if it works. then delete  the old key23:01
drag0niushmm23:01
zykotick9s12a: i wouldn't personally install a new kernel, unless i needed hardware support it added (i kinda you're being lead astray)23:01
phabais there a good website to get the basics on ubuntu security, like basic Anti-virus and firewall software?23:01
L3top MoPac: alsamixer        passwd mopac thisismopacsnewpasswerd23:02
drag0niusanyone good with dhcp/net interfaces? I found some working config, but i have totally no idea how the heck does it work23:02
zykotick9!virus | phaba23:02
ubottuphaba: Antivirus is something you don't need on !Linux. except where files are then passed to windows computers (perhaps using samba), See https://help.ubuntu.com/community/Antivirus23:02
abimaelzykotick9: what do you think?23:02
Muelliwell phaba, https://help.ubuntu.com/community/Security might be helpful.23:03
phabazykotick9, you telling me there are 0 viruses? what about trojans or be used in a botnet with some exploit embedded program etc23:03
phabai just wanna see some security software23:03
phabacheers Muelli23:03
MoPacsubz3r0: Aha I've found the answer thanks to hearing the program is called cryptsetup.  In the main options menu of cryptsetup in the terminal, there is action --head-er-backup-file=STRING23:03
s12azykotick9: I doubt too that updating the kernel would make the gui more responsive, I'm not an expert but not a total linux newbie either23:03
s12ait's not that I have strange hardware either23:04
subz3r0MoPac, never experienced with this, as I do normaly i complete backup with DD (clone the disk)23:04
s12aok maybe the integrated graphics is a bit old, but shouldn't be that bad23:04
zykotick9s12a: installing a kernel from outside ubuntu repo seems additionally dangerous to me.  (fyi you can see "/msg ubottu kernel" for some details if you decide to do it)23:04
zykotick9s12a: but perhaps you should be taking any kernel advice from someone running 2.6.32 ;)  best of luck - i'm away.23:06
zykotick9s/should/shouldn't/23:06
abimaelzykotick9: the kernel is from ubuntu server, what are you talking about?23:06
zykotick9abimael: that's still "outside repo" - it's a matter of opinion, cutting edge isn't always the best place to be :)23:07
abimaeloh  ok, i get what you mean, so what do you think? i mean ive got lower specs and im running fine23:08
s12aabimael: what about your video card?23:08
s12aor igp23:08
PapaSierrahow does this happen http://dpaste.com/767494/23:08
TheM4ch1n3PapaSierra: because the package management system was made by total "geeks" !23:10
MuelliPapaSierra: hm. well, why do you want to install that very version? What does apt-cache policy say to those two packages?23:10
PapaSierraMuelli the problem is i'm not sure about this stuff. i'm basically using chef to install some recipes made by other people. so in this case i'm installing: https://github.com/phlipper/chef-percona23:11
lrh9I'm going to do partitioning. I want to set up a multi-boot system for Linux-based systems only. How large should my swap partition be? I have 4 gigabytes of RAM. What file system should I use?23:11
s12aby the way, the linux pc I'm talking about is a different pc than what I'm using to write here23:12
s12ait's a testing system23:12
MuelliPapaSierra: *shrug* So you left Ubuntu territory, right? No idea how to handle that. But the apt-cache policy might get you some information.23:12
PapaSierraMuelli i have a fresh ubuntu12 install. all i can think is that i did follow these instructions: http://www.dotdeb.org/instructions/ could that have messed up what percona is looking for?23:13
s12aI guess I could bear a broken installation23:13
abimaelhmmm, im not sure23:14
webnethi all having an issue installing ubuntu server 12.04. it is being installed via a usb drive via unetbootin and it reaches the detect and mount CD-ROM step and fails sayimg it couldnt be mounted. is there a way to tell it to look for usb drives instwad from one of the other terminals?23:14
MuelliPapaSierra:  uh. ouch. You added a third (non Ubuntu) parties repository to your system. Usually not a very good idea.23:14
PapaSierraMuelli i see what you mean: http://dpaste.com/767495/23:14
MuelliPapaSierra: do apt-cache policy $package, where $package are the two packages, that are conflicting.23:14
PapaSierraMuelli ok, that was a work around because ubuntu is stuck at php 5.3.10 and i need 5.4. do you think that's what's done it?23:15
PapaSierrahow can i tell which two are conflicting?23:15
daoneunvquick question.. where do I put icons? so that I can use them in advance settings?23:15
Anxi80My laptop screen brightness goes from not barely visible to a little less very visible except the last step goes nuclear. How can I normalize this range more?23:15
MuelliPapaSierra: apt-cache policy percona-server-server, and apt-cache policy percona-server-server-5.523:16
icecube45Okay guys, i need some help... Im trying to play a flassh mmo game, realm of the mad god, but upon connecting i get an error, this is apparently caused by a firewall or by the system clock being wrong, is there something that is blocking flash?23:16
webnetanyone seen this issue before?23:16
s12aok. I installed CompizConfig. I'm overwhelmed by the options. What can I safely do to improve GUI performance?23:16
daoneunvs12a: what DE are you using?23:16
s12aunity23:16
daoneunvs12a: they're all safe and if they're is a risk it will prompt you.23:17
PapaSierraMuelli thanks for you hints! http://dpaste.com/767497/23:17
s12aok let's see23:17
icecube45Anyone?23:17
MuelliPapaSierra: eh. give us apt-cache show on both packages, for completeness.23:18
fosser_joshhi i am currently windows user i wanted to switch to ubuntu linux. But i wanted to know how ubuntu linux is better than windows?23:19
MuelliPapaSierra: anyway, I think you can just go ahead and apt-get install percona-server-server, without forcing it to be that very version that it tries to force it to be.23:19
goddardfosser_josh: how isn't it?23:19
icecube45!poll | fosser_josh23:19
ubottufosser_josh: Usually, there is no single "best" application to perform a given task. It's up to you to choose, depending on your preferences, features you require, and other factors. Do NOT take polls in the channel. If you insist on getting people's opinions, ask BestBot in #ubuntu-bots.23:19
Muellifosser_josh: it's free as in speech.23:20
PapaSierraMuelli http://dpaste.com/767498/23:20
icecube45Can anyonehelp me? its kinda urgent23:20
Muelli!anyone | icecube4523:20
ubottuicecube45: A high percentage of the first questions asked in this channel start with "Does anyone/anybody..." Why not ask your next question (the real one) and find out? See also !details, !gq, and !poll.23:20
goddardfosser_josh: people use ubuntu for several reason and i think the biggest is the freedom you get23:20
icecube45Muelli: scroll up23:21
Muelliicecube45: not gonna happen23:21
alazare619im in need of assistance from someone hwo has built ubuntu from scratch with live-build using debootstrap scripts that live-build package has23:21
icecube45Okay guys, i need some help... Im trying to play a flassh mmo game, realm of the mad god, but upon connecting i get an error, this is apparently caused by a firewall or by the system clock being wrong, is there something that is blocking flash?23:21
MuelliPapaSierra: well, dunno, just do "apt-get install percona-server-server". It should work.23:21
timothyjrthis may be a very basic question, but how do i execute a .jar file in ubuntu?23:21
PapaSierraok Muelli will try...23:21
icecube45Muelli: pasted again23:21
Muellitimothyjr: java -jar $yourjarfile23:21
gordonjcptimothyjr: something like "java -jar <thing>"23:22
=== guampa_ is now known as guampa
timothyjrI do that every time I wish to run it?23:22
goddardtimothyjr: right click and select the open jdk as the program to use to execute23:22
gordonjcpicecube45: not unless you've installed something that blocks flash23:22
icecube45i dont think so23:22
icecube45anything native?23:22
goddardtimothyjr: you can also make that the default program to use23:22
icecube45it isnt just flash gordonjcp23:22
PapaSierraMuelli: percona-server-server : Depends: percona-server-server-5.5 but it is not going to be installed23:22
icecube45it seems alot of my connections are blocked, gordonjcp23:23
gordonjcpicecube45: seems to work here23:23
gordonjcpicecube45: which browser?23:23
Muelliwell PapaSierra. weird. Then do apt-get install percona-server-server{,-5.5}23:23
icecube45gordonjcp: firefox23:23
icecube45gordonjcp: should i try a different one?23:23
gordonjcpnope, I'm using firefox here, seems to work23:24
PapaSierraMuelli percona-server-server-5.5 : Depends: percona-server-client-5.5 (>= 5.5.24-rel26.0-256.precise) but it is not going to be installed23:24
timothyjrI get a message that the file is not marked as executable23:24
timothyjreven opening it with open jdk23:24
goddardtimothyjr: change permissions23:24
goddardright click23:24
Muelliwell, okay. Two options. Either go down the road and manually install all those by adding them to your apt-get install command, or try to use aptitude, i.e. aptitude install percona-server23:24
goddardproperties23:24
gordonjcpicecube45: do other flash things work?23:25
gordonjcpicecube45: what exactly is the error you get?23:25
MK13What would cause iptables-save to not produce the options for entries that use --contrack?23:25
MuelliMK13: a bug would cause that.23:25
goddardtimothyjr: alternatively you can also sudo chmod +x filename23:25
MK13Muelli, any known bugs for that? I can't find anything for it23:25
Muelliwell goddard. Seems pretty unreasonable to me to require +x on a jar file in order to make the Java VM load it.23:25
timothyjrah, that worked.  Thanks, goddard23:25
icecube45gordonjcp: i get security error 4016 or soemthing like that23:25
MuelliMK13: no idea.23:25
goddardMuelli: haha ok23:26
icecube45gordonjcp: i read what causes it, something is blocking it23:26
timothyjrLearning my way around linus has been a humbling experience, to say the least.23:26
goddardtimothyjr: yep23:26
timothyjrlinus=linux23:26
PapaSierraMuelli, that's weird, using aptitude: No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 64 not upgraded.23:26
alazare619im in need of assistance from someone hwo has built ubuntu from scratch with live-build using debootstrap scripts that live-build package has =========please send pm23:26
gordonjcpicecube45: <shrug> some sort of local web filtering?23:26
MuelliPapaSierra: that's weird indeed. What's your exact command?23:26
drag0niushow do i turn off dhcpd?23:26
goddardtimothyjr: it gets better and funner23:26
PapaSierraaptitude install percona-server23:27
MuelliPapaSierra: well, maybe that *is* installed. Try percona-server-server23:27
PapaSierraoh now: aptitude install percona-server-server is going something23:27
icecube45gordonjcp: where can i check?23:27
PapaSierraMuelli http://dpaste.com/767511/23:28
timothyjrhave any links to any good ubuntu tutorials?23:28
timothyjrIḿ recovering Windows user, and really don´t know my way around linux23:28
goddardtimothyjr: better to just tackle stuff as you run into it... and bing / google / duckduckgo are your friends23:28
timothyjr:-)23:29
lrh9I'm preparing to migrate soon.23:29
Muelliwell PapaSierra. There seems to be a conflicting mysqld installed... You better remove that.23:29
MuelliI think.23:29
PapaSierratimothyjr: rm /* -Rf is all you really need ;)23:29
timothyjrduckduckgo is a new one to me23:30
PapaSierraMuelli i didn't install it. so the chef recipe must have23:30
Anxi80my digital sound out is turning on by itself all the time. Not using any sound apps.23:30
goddardtimothyjr: its become more populare for privacy reasons23:30
MuelliPapaSierra: *shrug* You have it black on white. It's offending.23:30
dj_segfaultHi.  My system was running fine, but I just hooked up an external hard drive (that connected fine earlier today) and my Ubuntu 10.04 system isn't trying to mount it.  Nothing in /var/log/messages.  I also tried a second external hard drive.  And the hard drive's light is on.  Is there a service I can restart that's supposed to listen for USB device insertions?23:31
PapaSierraand yes, mysql-common but 5.5.25-1~dotdeb.0 is installed is weird that it's coming from dotdeb. i reckon that debian squeeze repo is screwing things up23:31
MuelliPapaSierra: you can probably press "n" long enough until aptitude asks you to remove mysql and install the percona thing.23:31
goddardtimothyjr: i like bing because they give me money to use it well amazon gift cards23:31
s12asome desktop effects like "blur windows" really slow down gui performance on my pc23:31
PapaSierraMuelli ok, in my naivity i think i understand: percona added an apt repo of its own to apt. it installed mysql and expected a particular version, however apt went off to the dotdeb repo thinking it can get a newer version, now percona can't find it's dependency23:33
kristenbcghi23:34
kristenbcgIf I intercept all packets in input, and send their content through a raw socket destined to myself, will they be intercepted again ? What about output/prerouting/postrouting ?23:34
alazare619im in need of assistance from someone hwo has built ubuntu from scratch with live-build using debootstrap scripts that live-build package has =========please send pm23:34
PapaSierraMuelli downgrading mysql allowed percona to be installed! the server is now a mess so i'll wipe it and start over but at least now i understand. thanks so much for your invaluable hints and ideas23:36
MuelliPapaSierra: :) you're welcome.23:36
Muelli!anyone | alazare61923:36
ubottualazare619: A high percentage of the first questions asked in this channel start with "Does anyone/anybody..." Why not ask your next question (the real one) and find out? See also !details, !gq, and !poll.23:36
timothyjrAny recommendations for security software?  I use Trend Micro on my windows machine23:37
usr13well put, uborru23:38
alazare619because unless you have knowledge of live-build your of no use its not a ubuntu specific question now !stop being a dick please and thank you !muelli23:38
usr13!virus | timothyjr23:38
ubottutimothyjr: Antivirus is something you don't need on !Linux. except where files are then passed to windows computers (perhaps using samba), See https://help.ubuntu.com/community/Antivirus23:38
Muellihaha, that was a good one.23:39
timothyjrthanks ubottu23:39
timothyjris a firewall necessary then?23:39
usr13Muelli: What...?23:39
usr13timothyjr: Not really, no23:39
timothyjror spyware/malware protection?23:39
usr13timothyjr: Not needed23:39
usr13timothyjr: Welcome to Linux  :)23:40
foreWORXyes a firewall is necessary, and so is spyware protection23:40
timothyjrI know, right?  This is blowing my mind23:40
usr13foreWORX: Well yes, for MS Windows computers, but not for Ubuntu.23:40
foreWORXsigh...23:40
foreWORXfor all computers23:40
usr13sigh...   Thanks for your opinion.23:41
usr13but....23:41
timothyjrbbl, time to grill the hotdogs23:41
foreWORXbut what ?23:41
sinussssis 12.04 good?23:41
usr13foreWORX: you are wrong.23:41
foreWORXusr13, how am I wrong23:42
ulugbeki used to use an application that would allow me to have a (local)user's gnome session windowed inside an existing session? can anyone point me to right right keyword for apt-cache search?23:42
foreWORXyou do know that linux is exploitable, as is everything23:42
usr13It's not needed.  That's all there is to it.23:42
Muellisimple. You are trying to protect your system by adding more complexity. Instead, you should make it simpler. Dead easy.23:42
Muellisnake oil is a common synonym for i.e. firewalls ;-)23:43
gordonjcpMuelli: Antoine de Saint-Exupery - "Perfection is attained not when there is nothing more to add, but when there is nothing more to take away"23:43
MuelliI whole heartedly agree.23:44
=== jedney is now known as JonEdney
L3topFirewall is a bad example... though in general I agree.23:45
gordonjcpthe problem is that "firewall" has become misused23:45
gordonjcpa firewall must be a separate box, interposed between your demarc to the wider internet and your internal network23:45
gordonjcpyou cannot have a firewall on a desktop PC23:45
Vertigo_ hak5.secfo.org23:46
Dayofswordsgordonjcp: cannot, or shouldn't?23:46
gordonjcpDayofswords: cannot23:46
gordonjcpit's utterly ineffective23:46
=== Tux is now known as Minecrafter
L3topI will not go so far as to say utterly, but you are correct. However, it is a fundamental security requirement... regardless of its "complexity". I believe this discussion belongs in #ubuntu-offtopic23:48
ulugbekanyone have any idea what the package i am looking for may be called?23:49
sweeperyou have NAT. you need no firewall. end of story \o23:49
danubi get a GConf-Warning when trying to reset unity23:49
danubwhere can i get help putting this back to default?23:49
L3topThat would require a bit more detail ulugbek23:49
blackshirtwhat the problems'?23:49
L3topsweeper: no.23:50
danubsweeper did you just say that?23:50
danubnevermind he left23:50
danublol23:50
ulugbekL3top: understood, I just didn't want to flood with the description yet again23:50
L3topJust put your issue on one line ulugbek23:51
danubi get an error NameError: global name 'GError' is not defined23:51
danubwhen trying to do unity --reset23:51
ulugbekL3top: I am trying to find the package that allows one to have a gnome session 'inside' another gnome session23:51
danubhow do i fix unity --reset?23:55
blackshirtUlugbek, what you mean with inside?23:55
danubwhat is this new error "ignoring unknown parameter "encrypt password" message that keeps popping up now?23:56
ulugbekblackshirt: an instance 'windowed' within a running gnome session23:56
blackshirtulugbek, likes gnome-panel?23:57
ulugbekblackshirt: nope, more like an entire gnome 'desktop' running 'inside of another23:58
ulugbeksimilar to remote desktop or xdcmp23:58
ulugbekexcept with a 'local' user/gnome23:59

Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!