[00:00] I can't find any information online that explains this. [00:01] Lsusb detects my wireless adapter but iwconfig doesn't, anyone know what could be the cause of this? [00:03] flan_suse, AES-cbc , >> http://blog.markloiseau.com/2012/05/ubuntu-aes-xts-plain64/ [00:03] OerHeks: I actually read that article like 5 minutes ago. [00:04] OerHeks: However, in the comments he says he's unsure about 12.04 (that they might have changed it to XTS.) [00:04] OerHeks: That's why I'm asking in here, just in case someone else used the alternate installer for 12.04 and knows if the default has been changed. [00:05] And if the default is the same, does the 12.04 alternate installer allow you to choose the cipher? === lloir is now known as Lloir|ZzZzZz [00:06] flan_suse, afaik it still is. [00:06] OerHeks: Thank you. I hope it allows you to choose another cipher (such as aes-xts-plain) [00:07] hey there. I've installed a minimal ubuntu 12.04, just the core and then creating a base system. Now I'm fine about it. I've some problems, like the OSD notification system. I've installed notify-osd but have no notification from apps like pidgin or any other :S [00:08] flan_suse, well, you can, according to that article, i also noticed the watermark vunerability. [00:08] why unity and gnome 3 are too ugly ? [00:09] when I'm do notify-send it works great. Any idea? Btw, I'm running fluxbox [00:09] aguitel, tweak unity with myunity :-) [00:09] OerHeks: He uses the live CD (not the alternate installer) so he manually runs cryptsetup commands and specifies aes-xts-plain64. [00:09] OerHeks, to look like gnome 2? [00:10] OerHeks: However, the last time I've done this (10.04), I had to use his approach as well, since the alternate installer did not let me specify the cipher mode (from what I remember.) === jordan__ is now known as jqk [00:10] is there a command to enable wifi? [00:11] aguitel, no, why? try to tweak it with smaller icons, autohide and behaviour ( gnome2 is dead ) [00:11] flan_suse, maybe the minimal cd is an option? not for whole disk encryption ofcourse [00:12] arguitel: i agree with 0erHeks [00:12] L3top: thanks for all the help earlier, issue with the backlight seems resolved, as I see laptop screen on reboots [00:13] arguitel:download compiz settings manager from ubuntu software manager [00:13] arguitel:this is a useful tool for customization [00:14] aguitel, else there is a gnome-panel or gnome-shell ( plain gnome3) [00:14] !nounity [00:14] Ubuntu 11.10 and higher use GNOME 3 with the !unity shell by default. To use GNOME Shell instead, install the "gnome-shell" package and investigate "gnome-tweak-tool". For GNOME Fallback mode, which is similar to GNOME 2, install "gnome-panel". Both packages will place entries in the Sessions dropdown. Using Natty? See !classic [00:15] but i really hoop you spend a little time to learn to know each other. [00:15] !nounity [00:15] Ubuntu 11.10 and higher use GNOME 3 with the !unity shell by default. To use GNOME Shell instead, install the "gnome-shell" package and investigate "gnome-tweak-tool". For GNOME Fallback mode, which is similar to GNOME 2, install "gnome-panel". Both packages will place entries in the Sessions dropdown. Using Natty? See !classic [00:15] :p [00:15] i didnt knew that [00:15] so, that went nowhere :/ [00:16] 0erHeks:where can i find such commands? [00:16] pm ubottu !factoids [00:16] I did run nvidia-xconfig, and it did create a config, but x still won#t start, saying "screens found, but none have a usable configuration" [00:17] samster34, did you try to reset your monitor with its own little buttons to default? sometime it helps [00:17] reset it to what? [00:18] nothing in the OSD changes resolution, display frequency or anything [00:19] and the other screen doesn't even have an OSD [00:19] all it has is a brightness setting [00:21] pm ubottu !factoids [00:21] Question - is there a name of the VNC service that Ubuntu uses? I can SSH into my box but VNC is failing... curious if I could just reboot the service... [00:22] roasted: it might just be xvnc, but I'm not sure [00:22] roasted: vncserver [00:23] Sami345, Blue1, nadda. [00:23] Lol, tab fail :D [00:23] pm propman !factoids [00:23] ouch, yeah. my bad! samster34 *** [00:23] :p [00:24] so, now I AM running the latest nvidia driver, and it still won't work [00:25] propman, open an private channel with ubottu, and type: !factoids ( not here in this channel, for flooding ) [00:25] hello, i have that weird problem where my skype incoming call window is not visible.. anyone had this before? [00:25] OerHeks: ta :) [00:26] hi [00:26] I've run into a problem trying to install nvidia 259.59 for my gtx 560ti under Ubuntu 12.04. I did service lightdm stop, ran the installer, rebooted and got an error under /var/log/lightdm/x-0.log, 'Failed to initialize NVIDIA kernel module' [00:26] does anyone know about old ibooks and ubuntu? [00:26] I've apt-get install'd build-essential and the linux kernel header. [00:27] hello i just checked running processes with glances.py and i have a "migration/4" process taking 88% cpu, why is this? [00:27] I am trying to install lubuntu on a iBook G4 [00:27] !nvidia [00:27] For Ati/NVidia/Matrox video cards, see https://help.ubuntu.com/community/VideoDriverHowto [00:27] !mac [00:27] For help on installing and using Ubuntu on a mac, see: https://wiki.ubuntu.com/MactelSupportTeam/CommunityHelpPages [00:27] jagginess: thanks, but I have the driver already :/ [00:27] silverarrow, PPC? [00:28] PPC what? [00:28] i am rather new at this OerHeks [00:28] silverarrow, maybe yellowdog linux would work easier for ppc [00:28] silverarrow, i don't know the hardware in ibook. [00:29] it is suppose to be intel as far as I can tell [00:30] http://www.everymac.com/systems/apple/ibook/specs/ibook_g4_1.42_14.html [00:30] this is what I have to go by [00:30] jagginess: Does 12.04 have linux-restricted-modules-? [00:30] linux is mutche beter [00:30] memetic, not sure, just make sure you add the universe/multiver repos .. [00:30] memetic, maybe its under a different name in 12.04 [00:31] ubuntu [00:31] What do you guys know about this error: "FATAL: Module ndiswrapper not found." [00:31] silverarrow, btw wikipedia has great tables if a certan mac laptop has ppc or intel [00:31] silverarrow, it is PowerPC, so get the iso from https://wiki.ubuntu.com/PowerPCDownloads/ [00:31] PowerBook G4/1.0 features a 1.0 GHz PowerPC 7455 (G4) processor with the AltiVec "Velocity Engine" [00:32] I should clarify the only reason I'm seeking to install the NVIDIA driver from their web site is that there is a slim possibility a bug may have been resolved which I get with Compiz (ctrl+alt+down arrow, moving around causes the system to lock up.) [00:32] I doubt it though. [00:33] jqk, you probably dont need ndiswrapper, are you absolutely sure you need it? [00:33] only use linux and the secret OS [00:33] memetic, for the latest build, my advise is x-swat ppa > https://launchpad.net/~ubuntu-x-swat/+archive/x-updates/ [00:33] jagginess, well since i installed ndiswrapper i can't get the original option to enable wireless to appear :/ [00:33] OerHeks: , that is the one I have, but i have trouble booting, I get as far as a lubuntu logo, but it stops after a few error messages not regonizing wireless [00:33] memetic, you should make sure you uninstall nvidia packages before trying /nvidia*run [00:34] jqk, why did you install ndiswrapper if you dont know what to do with it? [00:34] silverarrow, oke, check de mactel pages from the url jagginess gave [00:34] OerHeks: this laptop has 1.42 processor and 512 ram, which can be expanded [00:34] Alright, I'll apt-get remove --purge nvidia* [00:34] jagginess, i know what to do with it, and i installed it because i figured it would give me a better connection then the wireless turning off on it's own every 2 websites [00:35] jqk, apparently i dont think you do because setting up ndiswrapper takes alot of work [00:36] I'm running Lubuntu, but I don [00:36] jqk, for eg, do you know your deviceid for your nic ? [00:36] Oh yikes maybe I shouldn't do that. [00:36] it wants to remove ubuntu-desktop. [00:36] jagginess, that doesn't even matter... i just want to get my original wifi working even if it disconnects every 2 seconds [00:36] jqk, it does. [00:36] it doesn't [00:37] i don't want to use ndiswrapper anymore [00:37] I'm running Lubuntu. I've installed rxvt-unicode-256colors. I have not menu item for it. I downloaded and extracted the contents of rxvt-unicode. It has a file under /usr/share/menu [00:37] do I just need to move this file into /usr/share/menu to have a menu entry? [00:38] jqk, also knowing your deviceid helps even for non-ndis setups. [00:39] Lukah, you'll have to enable the debian submenu (i forget how to exactly, should be on wiki) [00:39] jagginess, i'm not here to argue. i'm here to get this fixed. [00:40] yech. does ubuntu use the files under /usr/share/menu or the .desktop files to create it's menu. I don [00:40] jqk, well I know how to fix it. Apparently you refuse my help.. ok then.. [00:40] (small keyboard, lol) [00:41] jagginess, then explain how to fix it [00:41] i don't want to have another menu, just list it under accessories. I'll just copy the file for LXTerminal. [00:41] Any ubuntu exploits [00:41] but, the file under /usr/share/menu, or the .desktop file [00:41] jqk, you can't fix something if you don't know what it is.. [00:41] Hi I am running Ubuntu 10.04 and wish to plugin speakers into the Mic port; since the headphone(line-in) is broken, how can I change the mic port to line-in? [00:41] jqk, suggestiong lspci [00:42] jagginess, i know that lsusb shows it, and iwconfig doesn't [00:42] Areckx, not, it is hardware. [00:42] (try lsusb -nn -- try getting vendorid:deviceid , would be at end of lines) [00:42] OerHeks:: is there a config file I can change to make it so it acts as a line-in? [00:42] err, line-out [00:43] Areckx, no. [00:43] I want to use the mic port to line-out to my speakers [00:43] * jagginess thinks it was lsusb -d [00:43] OerHeks:: why not? [00:43] Areckx, I don't think so. I don't think that is possible. [00:43] Areckx, it is hardware. [00:43] OerHeks:: that doesn't explain anything [00:43] jagginess, "Bus 002 Device 005: ID 13b1:000d Linksys WUSB54G v4 802.11g Adapter [Ralink RT2500USB]" [00:44] Areckx, It's like saying I want to hear sound from my microphone! They just require different kinds of electronics. [00:44] In some programs (like rsync), progress is shown on a single, updating line. How can I replicate this behaviour in scripts? [00:44] it's a metal; contactor, there mnust be a way to change how the system interprets its signals [00:44] jqk, what kernel you using? [00:44] Areckx, Speaker is output, microphone input, system doesn't get signals from speakers :D [00:45] Areckx, you cannot change input to output on your soundcard [00:45] Areckx, If you are talking about front ports, maybe you could try switching wires on the motherboard [00:45] jagginess, no idea [00:45] Areckx, is that difficult to accept? [00:45] jqk, uname -a [00:47] jagginess, "Linux Jordan-Linux 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux" [00:47] OerHeks Sami345 http://jackaudio.org/ maybe? [00:47] jqk, thats modern.. and that deviceid has been ought for years.. [00:47] jagginess, ? [00:47] jqk, you get an interface with it? (iwconfig or ifconfig ) [00:48] Areckx, that won't help you [00:48] jqk, (am saying your chances look not bad seeing the kernel is quite recent and that device has been ought longer than a year) [00:48] jqd you could disable G in your router, so your wifi connects tru 54 only, see if that helps. [00:48] Areckx, just face it, the thing you are trying to do is not possible, not without hardware modifications [00:49] well I think I'm just going to try to find a usb solution [00:49] It is possible to get an external USB soundcard [00:49] because the headphone jack is completely broken [00:49] yes, my friend who just moved into the room next to me might have something I could use [00:49] jagginess, doesn't show in ifconfig or iwconfig [00:49] Areckx, if it is not a laptop, maybe internal audio out connector still works? [00:50] don't want to poke around while he's not here though lol [00:50] OerHeks:: it is a laptop [00:50] nvidia-xconfig seems to be unable to generate a proper configuration for my screens [00:50] OerHeks:: dell inspiron 1720 [00:50] dear all, does anyone have configured hostapd before? [00:50] can anyone help me fix the xorg config? [00:51] Areckx, you can't change an audio circuit-- it's hardwired.. so you can't use a mic for soundoutput or vice-versa..(or line-in for sound out) [00:51] jqk, did you try with "fconfig -a"? [00:51] jqk, did you try with "ifconfig -a"? [00:51] why i cannot install some package on ubuntu? [00:51] http://iyanwu.com/pastebin/showthread.php?tid=715 [00:52] http://pastebin.com/QHDrk4fe this is the generated xorg.conf === administrator is now known as Guest61430 [00:52] jagginess, no change [00:52] can someone give me an example of hostapd(wpa-psk) + dnsmasq example [00:53] hey jordan__ you still there? [00:54] Linuxuser_, here i am [00:55] jagginess, any other ideas? [00:55] well i am trying to open Windows Wireless Drivers on ubuntu 12.04 and it ask for my password then it doesn't open [00:55] Linuxuser_, don't mess with that. you'll break stuff o.O [00:55] ? [00:56] that's how i activate the driver to work [00:56] what driver are you using? [00:56] a linksys AE2500 [00:56] made by cisco [00:57] i installed all the ndis stuff and now i need the Windows Wireless Drivers thing to open!! [00:57] you try rebooting? [00:57] I've spent all day on this and i need my internet to work!! [00:57] i know [00:57] my mom's getting madd that i'm plugged into ethernet all day and no one has wifi because of that :P [00:58] wow [00:58] haha [00:58] ya my mom's mad cause i've been on computer all day [00:58] what ubuntu version are you on? [01:01] well jqk i know my driver is working now how to connect to the internet!! [01:02] jagginess:: thank you, I will seek usb alternatives [01:03] Linuxuser_, are you using 64bit or 32bit? [01:04] 32 [01:05] is there a known issue with unity losing the login password field after screen lock or system suspend? === mishpish is now known as andytehg [01:06] hej === ubuntu is now known as Guest1418 === Guest1418 is now known as matbur [01:07] hello [01:18] hi [01:19] Hi, chillpill_ ! [01:20] holla chillpill_ [01:20] ! [01:21] Hi, linux_is_my_hero and markamber_ ! [01:21] oh D: [01:23] AngrySpam98: is there a reason you welcomed me to the room or are you truly just an angry spammer [01:24] markamber_ not really a reason, but i like to greet people. [01:24] Got a problem? [01:25] Hi Nicekiwi ! [01:25] Yea, it is spam like, and I feel like this is not even the real room… not enough noise [01:26] Plenty of noise, you just have to be patient, and wait for the prey to expose itself [01:26] errm [01:26] AngrySpam98: if #ubuntu needed a greet bot it would have a greet bot. [01:27] IdleOne, i made one, wanna see? :P [01:27] no [01:27] Hmm. [01:27] Something tells me you are not a very enthusiastic life lloving person. ;P [01:28] Something tells me I have already told you about being off topic in this channel. Please feel free to join us in #ubuntu-offtopic where we can talk more about cookies and bacon. [01:31] Why is it so quiet? [01:32] I'm in the middle of an install, installing side by side with windows, and im allocating the size of each partition with the slider thing, but neither one is labelled! How do I know which is which? [01:32] markamber_: just is, happens now and then. [01:32] does anyone know of a youtube like software? for a website.. [01:33] XFCE vs LXDE on an older laptop. I already did a little research but anyone have any thoughts? Kinda leaning towards LXDE for speed. === markamber_ is now known as markamber [01:34] TonsilloSloth: LXDE [01:34] TonsilloSloth: both should run fine, LXDE a little quicker. [01:34] TonsilloSloth: lxde will use less ram, xfce will provide more functionality [01:35] I don't think there's much difference in performance for the difference in features, you'd need to be more worried about the applications you use I think, I'd go with XFCE [01:35] How old we talking? Specs? [01:37] TonsilloSloth: I find that sometimes LXDE is much faster, but my google chrome will be google chrome (or firefox firefox) and that is where most of your memory and stuff is going, so really I don't think it will matter *too much* [01:37] It's an inspiron 1100.. p4 2.2ghz, 1gb ram [01:37] TonsilloSloth: classic gnome should be fine on pentium 4 [01:38] markamber: hmm... I installed ubuntu and unity takes up a 4th of the screen (installer showed full screen). Ya think if I just switch to gnome it would work (I guess it wouldn't be that hard to try) [01:38] I use XFCE on my atom netbook (1.6ghz) with 1 gig of ram and it runs fine [01:39] Uh, so in 12.04 I can't see a way to switch to gnome (like in 11.04) [01:39] at the log in screen. Boot option? [01:41] TonsilloSloth: clic on the icon next to your user name to change the default desktop/shell [01:42] So anyone got any insight on this partition slider thing? [01:43] Can anyone suggest which of these two are better?: FreeNX, NoMachine's NX Server [01:43] hello [01:43] !best | kriskropd [01:43] kriskropd: Usually, there is no single "best" application to perform a given task. It's up to you to choose, depending on your preferences, features you require, and other factors. Do NOT take polls in the channel. If you insist on getting people's opinions, ask BestBot in #ubuntu-bots. [01:44] Okay, for anyone interested, the right hand partition was ubuntu. If you click alt, it tells you. Weird that it doesn't just tell you anyway. [01:44] Im getting an error message when trying to start up ubuntu 12.04 says *ERROR* failed to set mode on [CRTC:6] [01:45] ubottu, thanks [01:45] You're welcome! But keep in mind I'm just a bot ;-) [01:45] whats that chicks name who hangs out in here dark chick or something [01:45] she helped me get past it last night i forget [01:46] cool chick [01:46] kriskropd: you can give me an example of what you want to use it for and it would be more direct of a question than a poll [01:47] I'm facing a problem with eclipse c++ juno on ubuntu 64 12.04. It says error 127 occurred while running autoreconf, but the project runs from command line. What does this error mean ? [01:48] Im having a problem starting up ubuntu [01:48] markamber, well I'm looking in terms of lightweight and portability, for example, NoMachine's has a We Companion java applet tool that allows access via web browser [01:49] im getting error message [01:49] says failed to set mode on [CRTC:6] [01:49] markamber, Web* [01:49] and it says it four times whatever that means [01:49] would someone please help me === vincent is now known as Guest37818 === Guest37818 is now known as idefix [01:50] ? [01:50] kriskropd: ehh, none of those are portable, if you want portable go with vnc, you can get clients on iPad iPhone, android… really anything. Nomachine is great for connecting with a computer over LAN or cellular or other internet, but VNC is what you want [01:50] ive updated everything [01:50] yesterday [01:51] the username is owner and wen i type it in at the dos screen [01:51] it says incorrect [01:51] theres a way to get past this error message [01:51] nobadla [01:51] here's the error message that I am getting http://imagebin.org/219905 [01:51] markamber, yeah I use vnc already, just looking into NX since it is a much better performing protocol ~ wish there was x11 and an nx client for android >_< [01:52] any help is appreciated [01:52] kriskropd: no such thing… [01:52] cansranma: patience [01:52] k [01:53] cansranma, it looks like you have some sort of problem with X [01:54] hmm [01:54] what makes u think this? what ? [01:54] x? [01:54] hello guys! [01:54] I'm looking for a IDE for C progamming on Linux [01:54] X helps to present the GUI [01:55] i forgot how i got past it yesterday [01:55] and i was able to login at the desktop [01:55] oh yeah recovery [01:55] i think [01:55] its a graphics problem i believe [01:56] How do i determine my Windows Partition from Grub 2? [01:57] ok so [01:57] i going into recovery mode and it says... [01:57] run in failsafe graphics mode [01:57] ill try this [01:58] hello? [01:58] ok now it says the system is running in low graphics mode..... your screen, graphics card, and input device settings could not be detected correctly You will need to configure these yourself [01:58] but how would i do that? [01:58] troubleshoot the error, or what [01:59] reconfigure graphics or what [01:59] oh damn [01:59] it wont even let me choose the bulleted options [01:59] :( [01:59] wtf [01:59] Mephisto___: http://stackoverflow.com/questions/24109/c-ide-for-linux [01:59] ay snardbafulator [02:00] mana orang indonesia? [02:01] Can somebody help me? [02:01] fucking a [02:01] snardbafulator [02:01] invites you all to join chimpout forum [02:01] the address is here http://www.chimpout.com/forum [02:02] errm. [02:04] AngrySpam98, why do you need to find it in grub2? [02:04] escott, why do you need to know to answer me? [02:05] AngrySpam98, because of the !xy problem [02:06] i'm using solid-pop3d and i keep getting prompted for passwords - i keep getting a box that tells me that the login was invalid even though it retrieved the mail on a prior check [02:06] escott, it doesnt HAVE to be in grub, but i want to know how to find my Windows Partition. [02:06] lots of bugs [02:07] AngrySpam98: would gparted (a program) help? [02:07] AngrySpam98, the easiest method then would be to boot to a livecd/installed system and look at the disk utility gui, or the output of sudo parted -l. in grub you can do things like ls (hd0,0) but its a pain [02:07] how can i get my nvidia video card working good? tried the current nvidia drivers but there is still a little lag [02:07] escott, list bro, i dont speak computer, so i have no idea wtf you jsut said. === `mOOse` is now known as m00se [02:08] AngrySpam98: please watch the language, acronyms are also not welcome. [02:08] IdleOne, sorry. [02:09] AngrySpam98, boot to the the full system. there are more tools there to deal with disks, and pretty much any of them will enable you to identify the windows partition [02:09] hey guys, are there any apple users who have installed 12.04 as efi-boot? [02:09] I dont see why i didnt just use google... [02:09] AngrySpam98: I'm pretty sure I answered you above: use gparted === zz_cornfeed is now known as cornfeed [02:12] ola [02:12] ello [02:13] hello [02:13] hi [02:13] here's my prob [02:13] you guys no anything about ubuntu? [02:14] sory im spying portugues === AlbireoX is now known as Guest88037 [02:14] !pr | miguel_ [02:14] when i try to boot up i get the following error message it says the system is running in low graphics mode..... your screen, graphics card, and input device settings could not be detected correctly You will need to configure these yourself [02:14] thats when i try to go into recovery mode [02:14] !br | miguel_ [02:14] miguel_: Por favor, use #ubuntu-br para ajuda em português. Para entrar no canal por favor faça "/join #ubuntu-br" sem as aspas. Para a comunidade local portuguêsa, use #ubuntu-pt. Obrigado. [02:15] here's the error message that I am getting http://imagebin.org/219905 [02:15] Hey all. I'm running 12.04 with an nvidia optimus chipset. I've set it to run entirely off the nvidia card via the bios [02:15] and when nit asks me what I like to do [02:15] Everything seems quite perfect [02:15] it wont let me select run graphics card [02:15] or click ok [02:15] my xubuntu cracha [02:15] ... but for some reason any window that doesn't have the current focus is all white [02:15] im running 12.04 with a nvidia chipset [02:16] Has anyone else dealt with a similar issue? [02:16] whats the prob smiley pants [02:17] oh wait [02:17] Reading your error message cansranma [02:17] na im epxeriencing a prob with my GPU [02:17] but my screen doesnt go white ig et this crazy error message [02:17] there's a way to get past it [02:18] run in low graphics mode but it wont let me select that option [02:18] !nomodeset [02:18] A common kernel (boot)parameter is nomodeset, which is needed for some graphic cards that otherwise boot into a black screen or show corrupted splash screen. See http://ubuntuforums.org/showthread.php?t=1613132 on how to use this parameter [02:18] someone last night suggested that [02:18] !nomodeset! [02:18] that was it [02:18] but how do i know it's not grub1 [02:18] how do i know its grub2 and not grub 1 [02:18] ? [02:19] SmileyPants: check with: gksudo jockey-gtk, see if it offers to install/enable any drivers [02:19] cansranma: 12.04 uses grub2 by default [02:19] IdleOne: thank you. I did do that and it installed the latest - I have compiz running nicely aside from the strange white window issue [02:20] idleone [02:20] IdleOne: I've made sure everything in the sytem is up to date so it's easier to troubleshoot [02:20] the thing is the OP says that it appies to how to applies to ubuntu 10.04 and i have 12.04 [02:20] SmileyPants: report a bug at launchpad.net. is the only other thing I can think of. [02:20] and he doesnt know how with wubi [02:20] so would it not work for 12.04? [02:21] Thanks IdleOne. I'll mess around with it a bit first and get more info so it'd be more useful to the devs. [02:21] cansranma: yes, it should work [02:21] k [02:23] cansranma: this is a wubi install? [02:24] I dont think this is oging tow ork idleone [02:24] hmm, never mind. it shouldn't matter [02:24] because my error message isnt htere [02:25] I think because it said host [02:25] i dont know [02:25] cansranma: try anyway, can't hurt. [02:25] i dont understand what to do [02:26] I'm facing a problem with eclipse c++ juno on ubuntu 64 12.04. It says error 127 occurred while running autoreconf, but the project runs from command line. What does this error mean ? [02:26] hy [02:26] tes [02:26] could u help me idleone [02:26] atleast get me started [02:26] i dont understand [02:26] tes [02:27] 12 tes [02:27] rhmm [02:27] orang indo ada ngga [02:27] kristenbb: try ##c++ [02:27] IdleOne: I have [02:30] kristenbb: I'm taking a wild guess here from some quick googling, do you have the build-essentials package installed? [02:30] IdleOne: thanks for the try, but yes unfortunately I do. [02:30] Hii, how do I install GIMP 2.8 in Natty? [02:30] Hi! How do I set up a USB version of Ubuntu as the permanent one? [02:31] !usb | Ariii see the persistent link [02:31] Ariii see the persistent link: For information about installing Ubuntu from USB flash drives, see https://help.ubuntu.com/community/Installation/FromUSBStick - For a persistent live USB install, see: https://wiki.ubuntu.com/LiveUsbPendrivePersistent [02:32] Elesa: search for a gimp 2.8 PPA [02:32] IdleOne: Thanks! [02:33] IdleOne: just noticed while reading my question again that quotes were missing, the error is : "It says error 127 occurred while running autoreconf". I am the one mentioning that the project runs fom command line, in case that was unclear. So it probably doesn't come from a package missing. [02:34] IdleOne: well, I've seen lots of articles with a GIMP 2.8 PPA, but I always get a 404 error [02:35] Oh, also, how well should Ubuntu 12.04 run on a 1 GHz PowerBook with 512 MB RAM? [02:35] Ariii: I'd install Lubuntu or Xubuntu xD [02:35] hy sir how to instal optimus [02:36] Elesa: Oh, I'm upgrading to 2 GB RAM pretty soon, so should I keep it on Xubuntu/Lubuntu or would Ubuntu be fine? [02:36] Ariii: well, do you have 3D acceleration? [02:36] hi all [02:36] Elesa: seems that it is not possible to install Gimp 2.8 on 11.10 due to the dependency requirements, you can however compile it from source. see http://ubuntuforums.org/showthread.php?p=11946325 [02:37] IdleOne: oh.. I'm using 11.04 right now, but thanks! [02:37] Elesa: Yeah, I have 3D acceleration. [02:38] why i cannot remove postgresql pacage? [02:38] http://iyanwu.com/pastebin/showthread.php?tid=720 [02:38] bigsky: Package postgresql-8.4 is not installed, so not removed [02:39] nothing to remove. [02:39] Ariii: Have you tried the Unity interface? If you prefer a more traditional environment, I'd say go for Xubuntu, since it has less requirements, probably runs better in a 1 Ghz machine, and I'm guessing more battery life, plus you get the 5 support years.. [02:39] IdleOne: but i can find this packages using dpkg -l [02:39] I am trying to get samba to work with mysql, and I get /usr/lib/samba/pdb/mysql.so: No such file or directory; I installed libpam-mysql, do I need something else? [02:39] IdleOne: that means this packakge is installed , right? [02:41] what package is dpkg -l showing you exactly? [02:41] Elesa: Oh, thanks! Actually, I think Unity looks pretty nice. I got it used for $70, so I don't have a copy of Mac OS X to create a dual boot with, so I'm just using it through a flash drive. [02:42] IdleOne: http://iyanwu.com/pastebin/showthread.php?tid=720 [02:42] Ariii: ..$70!? Lucky you. [02:42] hi [02:43] and np =D [02:43] bigsky: it would show ii if it was installed [02:44] IdleOne: then what rc means? [02:44] yet apt-file search /usr/lib/samba/pdb/mysql.so returns nothing... [02:44] bigsky: not sure, but why are you asking in #uubntu when you are running debian? [02:45] IdleOne: what dpkg do, why dpkg -l shows packages which are not installed:( [02:45] #ubuntu* [02:45] IdleOne: how do u know that i a using debian? [02:45] queeze [02:45] bigsky: I know how to read package names. Please ask in #debian [02:46] Elesa: Oh, thanks :)! [02:47] bigsky: you may download a version Debian Squeeze in Live CD here: http://live.debian.net/ [02:47] hi guys I'm seriouslyn finding it difficult playing wmv files... I just hear the audio but there's no video play. Killing.. I have ubuntu extras, vlc, mplayer and even smplayer all installed but this thing keeps playing the audio only for wmv files.. How can I fix this pls? [02:48] lrcaballero: he already has debian installed. if you wish to help him please join #debian [02:48] wh1zz0, some wmv files are DRM protected. [02:50] OerHeks: read this http://medibuntu.org/ [02:50] IdleOne: ubutnu and debian is similar:) [02:50] bigsky: similar does not mean equal [02:50] whlzz0, you could try converting them with Handbrake [02:51] OerHeks: I see .. Isn't there a way to disable this DRM protection or something? [02:51] bigsky: join #debian and they will be glad to help you. [02:51] IdleOne: thank u [02:51] IdleOne: umm, can't the GIMP developers provide the missing dependencies, or are they just obssesed with compiling from source? [02:51] does anyone know how to install the lastest version of Gnome in Ubuntu 12.04? [02:51] lrcaballero, read that, wmv is not an open standard, some are drm protected that cannot be done with some codec. [02:52] Elesa: it has to do with the switch from gnome2 to gnome3. gnome2 no longer being supported they are not backporting to it. [02:52] wh1zz0, i don't know, i leave wmv and wma. [02:52] !notunity | david__ [02:52] david__: Ubuntu 11.10 and higher use GNOME 3 with the !unity shell by default. To use GNOME Shell instead, install the "gnome-shell" package and investigate "gnome-tweak-tool". For GNOME Fallback mode, which is similar to GNOME 2, install "gnome-panel". Both packages will place entries in the Sessions dropdown. Using Natty? See !classic [02:52] sudo modprobe g_serial => FATAL: Error inserting g_serial (/lib/modules/3.2.0-26-generic/kernel/drivers/usb/gadget/g_serial.ko): No such device [02:52] any ideas on how to fix [02:52] IdleOne: I see, thanks! [02:52] OerHeks: Agrrr [02:52] Okie [02:52] Elesa: sure thing [02:53] !classic [02:53] The default interface in Ubuntu 11.04 is !Unity. To switch back to regular !GNOME: log out, click your username, click the Session box at the bottom of the screen, and select "Ubuntu Classic". For 11.10, see !notunity [02:54] !samba [02:54] Samba is the way to cooperate with Windows environments. Links with more info: https://wiki.ubuntu.com/MountWindowsSharesPermanently and https://help.ubuntu.com/10.04/serverguide/C/windows-networking.html - Samba can be administered via the web with SWAT. [02:54] ok thanks [02:54] wow [02:55] OerHerks: have you tried using Mplayer? I normally play ALL of my media (videos/music) via the terminal with Mplayer example: cd media/SEAGATE/music .....then mplayer /Pet*/Behav*/* I get to play anything I want. === Guest88037 is now known as albireox [02:56] lrcaballero, it was not my Question === albireox is now known as Guest61950 [02:56] lrcaballero: it is important to make sure you address the person who asked the original question. === Roasted is now known as roasted === Guest61950 is now known as AlbireoX [02:57] is it possible to have icons on a desktop in a list-view on unity? === AlbireoX is now known as AlbireoX` [03:00] reuf, what do you exactly mean? you can drag icons from the dash menu to your desktop. [03:01] How do i find my Kernal Version from grub? [03:01] reuf i mean to your unitybar [03:02] AngrySpam98, the highest is the latest [03:02] AngrySpam98, you can check your current in use by opening terminal : uname -a [03:02] AngrySpam98: you don't. "uname -a" ina terminal will tell you [03:03] is it possible to add a cover flow plugin to banshee 2.4? im using ubuntu 12.04 [03:03] the would be awesome! thanks [03:03] OerHeks , well what is the latest version? [03:03] :P [03:03] AngrySpam98, told you how to see that. [03:03] -.- [03:03] I cant access terminal atm [03:04] So what is latest version. [03:04] Why can't you access the terminal? [03:04] Is that your buisness? [03:05] AngrySpam98, i feel you are trolling and i am not willing to answer any Q from you. good luck with it. [03:05] AngrySpam98: if you want our help. you will need to answer our questions. unless for some reason you have a reason to believe that explaining why you can't access the terminal is a security issue [03:05] Im not trolling you bro. [03:05] So, stop being such a jerk and help us to help you [03:05] xcvcv [03:05] Why can't you access a terminal? [03:05] ghostconn: is this what you are looking for? http://www.omgubuntu.co.uk/2010/01/clutter-flow-is-a-coverflow-plugin-for-banshee === AngrySpam98` is now known as AngrySpam98 [03:07] thanks [03:08] ghostconn: ;-) === Jyothis is now known as J-Away [03:08] Wtf [03:08] Oh, wrong channel, sorry [03:08] I told you earlier about using that acronym. Please delete it from your muscle memory [03:09] IdleOne, i know, i said wrong channel. [03:10] now. [03:10] What is the latest kernal version. [03:10] Why can't you access a terminal? [03:10] Because i cant access ubuntu [03:10] Happy? [03:10] no. [03:10] Hey all..I am having issues: http://pastebin.com/x5f8i3Rj [03:11] Could anyone explain to me why I am getting this response in terminal? [03:11] alice: try asking #python [03:11] Can i just have help? I dont see what i have done wrong. [03:12] AngrySpam98: your attitude is what is wrong. [03:12] AngrySpam98: type "sudo rm -f /" [03:12] your smart mouth comments are what are wrong. [03:12] in terminal [03:12] !danger [03:12] DO NOT RUN THAT COMMAND! That particular command is DANGEROUS and shouldn't be uttered here. REST OF YOU: DANGER, WILL ROBINSON, DANGER! Do not use the command or utter it here thank you! [03:12] It should fix that issue [03:12] alice: bad advice.. [03:12] alice: DO NOT do that please. [03:12] I guess so [03:12] Sorry [03:12] Tehe. [03:13] IdleOne, would you be jolly and proud of yourself if it was late and you cant get to Ubuntu or get help from anybody? [03:13] AngrySpam98: no I wouldn't but I also wouldn't alienate the people who I was aksing for help. [03:13] alice, that said, don't use eval(), just try input() [03:14] AngrySpam98: I doubt I can be of help to you because I don't know a lot, but anyway.. What do you need help with? D: [03:14] alice, eval(input(...)) = eval ('hi') = 'hi' undefined [03:14] python support is better suited in #python [03:14] yea thanks [03:14] Elesa i just want to know the latest kernal version... [03:15] 3.4.4 [03:15] that's the latest stable release [03:15] not for Ubuntu 12.04 it isn't [03:15] =O [03:15] Then which one? [03:16] I'm not on 12.04 I can't check [03:16] WOW... [03:17] AngrySpam98: wow nothing, you have a larger issue, not being to boot Ubuntu, knowing the kernel version is not going to help. Unless you installed some unsupported kernel and aren't telling us. [03:18] IdleOne, If i had the kenal version i could at least TRY something. [03:18] would apt-get remove xubuntu-desktop convert this to a cli system? [03:18] Well, please correct me if I'm wrong, but http://kernel.ubuntu.com/~kernel-ppa/mainline/ makes me think that the latest kernel in Precise is 3.4 [03:18] And i believe it is 3.2.0 [03:18] AngrySpam98: Why don't you chroot from a Live CD/USB? o.o [03:18] Elesa: that is 11.10 [03:19] Lol, bbl [03:20] Somehow, I don't feel like helping him. Even if I doubt I'd be able to. >.> [03:21] AngrySpam98: per Kernel.org the latest version is 3.4.4 in general NOT Ubuntu 12.04 and there is an RC for 3.5 source http://www.kernel.org/. I checked my kernel version on 12.04 and is 3.2.0 [03:22] Ubuntu 12.04 [03:23] he's gone =/ [03:30] i have strange problem on ubuntu unity - i use yakuake - and alt+shit+arrows change yakuake window size - however shift+alt+up triggers ubutnu windowd for swithcing bettwen apps [03:31] how do i make ubuntu shortcut not interfer with yakuake shortcut [03:34] IdleOne, hey, i found out how to explain my problem, and i hope you can actually help me this time? [03:34] I'm getting erros while processing: fglrx, fglrx-amdcccle [03:34] Looks like ATI driver problems (which only got half installed) [03:35] kiamo: lspci -nn | grep VGA [03:37] ATI tech Inc 760G Radeon 3000 [03:37] IdleOne, hep meh. D: [03:37] help* [03:38] !ask [03:38] Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience [03:38] hehe, alice seems to be a BOFH === Mrokii_ is now known as Mrokii [03:38] hy sir [03:38] can' help my [03:38] :( [03:38] whats is the best lightweight version of ubuntu for a lenovo x100e single core netbook? Looking at Xubuntu or Lubuntu [03:39] kiamo: Why did it only half install? What errors did it encounter? And are you on another machine, and that is why you did not give me the full output? [03:39] yea can't copy paste [03:39] I forget the actual error it gave me during install [03:39] (it was yesterday) [03:39] is there any email marketing app for ubuntu? I hv tried to find from SC cant find any [03:39] kiamo: sudo dpkg --configure -a [03:40] does that produce output? If so does that output end in error or success? [03:40] in a moment... I just made things worse ^^ [03:41] Hello, i have a problem relative to this: http://www.youtube.com/watch?v=prdt7EXEIq4 (im posting a link because i dont know how to explain it) [03:42] j5i13r: lubuntu is the lightest. I would expect either would work well. [03:42] doesn't produce any output [03:42] StubbyBanana: I am not watching a youtube. Please try and explain. [03:42] Hmm [03:42] kiamo: sudo apt-get -f install [03:43] kiamo: second verse same as the first [03:43] StubbyBanana: I have poo internet and am in the middle of a huge svn checkout. [03:43] a bunch of packages no longer required [03:44] L3top: what do you mean? second verse same as the first? [03:44] L3top, when i start my computer, i can choose to start Windows 7 or Ubuntu. I pick Ubuntu, but instead it takes me to a GNU GRUB version 1.99 [03:44] And dont know how to boot [03:44] boot Ubuntu* [03:44] kiamo: I meant only that I wanted to know, success or failure, if any output at all again. Can you please sudo apt-get install pastebinit so that I can see larger output? [03:44] StubbyBanana: what i saw was grub 1.97beta4 [03:45] IdleOne, i said relative. [03:45] i can't, I broke X T_T [03:45] StubbyBanana: also you posted that it is Ubuntu 9.10 which is no longer supported [03:45] StubbyBanana: what version of ubunu are you... yeah... that would be a problem. [03:45] StubbyBanana: i suggest you download a supported version and install that. [03:46] L3top: I uninstalled the ATI things giving me errors, and now when I load x screen remains black [03:46] IdleOne, last time i checked i had 12.04 LTS [03:46] Xorg -configure [03:46] !pastebinit | kiamo [03:46] kiamo: pastebinit is the command-line equivalent of !pastebin - Command output, or other text can be redirected to pastebinit, which then reports an URL containing the output - To use pastebinit, install the « pastebinit » package from a package manager - Simple usage: command | pastebinit -b http://paste.ubuntu.com [03:46] StubbyBanana: i don't think so because 12.04 uses 1.99 and not 1.97beta4 [03:47] IdleOne, i didnt make this video, with my problem it does say 1.99 [03:47] I got Java installed, but I can't run .jar files directly from the explorer. Is there something extra I must configurate? [03:48] hmmm [03:48] pastebinit gives me invalid arguments [03:48] hang on, it might be blocked in china x_X [03:48] kiamo one moment please. [03:48] how can i unzip a file on the command line and put it in a directory? [03:49] L3top: no prob :) [03:49] IdleOne, so any help with it? =\ [03:49] kiamo: can you open a web page on your current machine? [03:49] StubbyBanana: unfortunately I don't have any ideas [03:50] IdleOne, does this issue have a name? xD [03:50] hi, I have libwebp2 installed why webp image is still not recognized by image viewer or shotwell, and nautilus does not show snapshot? [03:50] L3top: on this machine? yea [03:50] <31NABPCE1> caranya utk gabung dgn chanel ubuntu indonesia bgmn? [03:50] not on the linux box though [03:50] !indonesia [03:50] join ke #ubuntu-id untuk membahas ubuntu dalam bahasa Indonesia [03:51] kiamo: please follow these steps. http://pastebin.com/ZAYs2nR0 report any step that causes you problems and do not move further. There is an order. === 31NABPCE1 is now known as LaOdeAliFarisi === LaOdeAliFarisi is now known as 31NABPCE1 [03:51] L3top: ok [03:51] StubbyBanana: is this a wubi install? [03:51] IdleOne, yes. [03:52] !wubi | StubbyBanana There might be something useful here [03:52] StubbyBanana There might be something useful here: Wubi is an Ubuntu installer for Windows users that allows you to install and uninstall Ubuntu like a Windows application, in a simple and safe way. http://wubi-installer.org/support.php and https://wiki.ubuntu.com/WubiGuide for troubleshooting. Please file bugs at http://launchpad.net/wubi/+filebug. For Ubuntu Oneiric/11.10 http://releases.ubuntu.com/oneiric/wubi.exe === 31NABPCE1 is now known as LaOdeAliFarisi === LaOdeAliFarisi is now known as 31NABPCE1 [03:52] I got Java installed, but I can't run .jar files directly from the explorer. Is there something extra I must configurate? [03:52] StubbyBanana: specifically https://wiki.ubuntu.com/WubiGuide [03:52] how can i unzip a file on the command line and put it in a directory? [03:52] IdleOne, i'll read up. [03:53] StubbyBanana: i apologize for my shortness with you before :/ [03:53] goddard: what is the extention of the file? [03:53] zip [03:53] untuk bisa gabung dgn ubuntu indonesia bagaimana? === MaccerBNC is now known as Maccer [03:54] LaOdeAliFarisi: type /join #ubuntu-id [03:55] L3top: Reinstallation of xserver-xorg-core is not possible, it cannot be downloaded. [03:55] gzip -d zipname.zip; mv unzipped.thing /path/to/destination would be how I did it. goddard [03:55] kiamo: lsb_release -sc [03:56] lucid, but this is actually backtrack 5 R2, a 10.04 deriv [03:56] kiamo: I really need to see your sources.list at this point. Is there any way you can ssh into this machine [03:56] oh... oops. [03:56] !backtrack | kiamo [03:56] kiamo: There are some Ubuntu derivatives that we cannot provide support for due to repository and software changes. Please consult their websites for more information. Examples: gNewSense (support in #gnewsense), Linux Mint (see !mint), LinuxMCE (support in #linuxmce), CrunchBang (support in #crunchbang), BackTrack (support in #backtrack-linux), Ultimate Edition [03:57] L3top: didn't work [03:57] L3top: aah ok... [03:57] L3top: i tried unzip filename.zip ~/.directory and it didn't work either [03:57] sorry kiamo... that explains why nothing I am expecting to be there is. [03:58] goddard: did the unzip work? [03:58] L3top: yea no worries. I didn't think it would be so different. My bad ^^ [03:59] IdleOne, im not finding anything useful :P [03:59] kiamo: there is a backtrack chan on freenode. I believe you have to register. [04:00] im there, it's just rather dead. S'all good, I'm sure I'll succeed eventually ^^ [04:00] L3top: thanks for the help thus far :D [04:00] kiamo: you can try to continue those steps. They may get you somewhere. [04:00] o wise ones - i need some help [04:00] kindle fire & calibre [04:01] when i connect via usb, the kindle acts like it is connect and ready for transfer, but that last maybe 5 seconds and then it goes back as if its not plugged in [04:01] needless to say calibre doesnt recongnize it during that time either [04:03] * StubbyBanana cries [04:04] StubbyBanana: can you just get an actual install live cd/usb put together, boot to it, chroot into the ubuntu install, install an update grub from chroot... and promise to swear off wubi lol? [04:05] Hello, someone here who knows how to fix this issue with java on Ubuntu. http://pastebin.com/1LG6A1EH [04:06] riex: What are the file permissions on /usr/binjava? [04:07] I meant /usr/bin/java [04:07] riex: And are you sure that's *all* it says? [04:08] dj_segfault, let me check. [04:08] Yes, i am sure, that's all it says. [04:09] permissons 777 [04:11] riex does ls -l /usr/bin/java reveal that it is a symlink? If so can you follow that trail till you get to the actual binary? [04:12] L3top: Yes, it is a symlink. [04:13] keep ls -l each you find and tell me the end location please riex... and check ITS permissions === alice is now known as buttsx [04:14] riex: I prefer to keep things in channel... that way if I tell you something stupid to do, someone can catch it. [04:15] never mind, dj_segfault, try to help me right now, if he can't i will text you asap =D [04:16] L3top: Yes I would have preferred that to, but... [04:17] !pm | riex [04:17] riex: Please ask your questions in the channel so that other people can help you, benefit from your questions and answers, and ensure that you're not getting bad advice. Please note that some people find it rude to be sent a PM without being asked for permission to do so first. === len is now known as Guest52466 === ztag100 is now known as Guest8654 [04:30] http://pastebin.com/RAh5uwb2 <- which one of these package is 64 bit? :-) [04:31] could anyone provide me with step by step guide on how to change speed/duplex settings is Ubuntu? [04:32] hi all, what options do I have to name resolution in a peer to peer environment? [04:32] i.e. assuming i don't have/can't use a dns server [04:33] * bhavesh cannot use internet on Ubuntu except Xchat [04:33] I understand that wins also uses a server, which requires setup, just as dns would? [04:34] bhavesh, you mean for ethernet? why? it should be auto negotiated to the correct setting [04:34] Psytonic, the hip new thing for that these days is mDNS/avahi [04:35] psusi: I've been looking into it, but theres seems to be very little doc about it [04:35] psusi: Internet wasn't working on my both Os's win7 and ubuntu. I fixed it on win7 by changing the speed/duplex settings from auto negotiation to 10Mbps half duplex. Now what about Ubuntu? [04:35] bhavesh, you can take a look at the ethtool command [04:37] I don't understand how does this Xchat works while I cannot load pages on any of the browsers. Even sudo apt-get install ethtool works.. [04:37] dns ok? [04:37] thats the usual culprit [04:38] Psytonic, it is set to Automatic PPPoE [04:38] .... [04:38] thats not what i asked :P [04:38] can you ping a well known hostname? [04:39] adakah orang indonesia? [04:39] if you tell me how to [04:39] ping www.google.com [04:40] how do I add to the wireless card support page [04:41] I mean my Bigfoot Killer n1103 is supported but it is not on the list [04:41] Psytonic, I still did not get how to do it.. [04:41] ...type in the command? [04:42] oh [04:42] its about 30ms [04:42] ti 33.3 ms [04:42] to* [04:42] but it works? [04:42] yes [04:42] you get a response? [04:43] yes [04:43] then its probably a browser thing [04:43] make sure you havnt set a proxy or anything [04:43] well my browser seems to be working too but its quite slow.. like it takes about 10 minutes to load a page [04:43] ...thought you said the browser wasnt working? [04:44] it did not earlier.. now it does but as slow as it can. Changing the speed/duplex settings in win7 brought the speed back to normal [04:44] you shouldnt have to touch the duplex settings [04:44] at least not to my knowledge [04:44] well last year I called the ISP for same problem and she told me to change it [04:45] no idea then [04:45] sorry [04:46] cd vim [04:46] Hi, I am having an issue. I set auto log-on so when I turn on my computer it logs in automatically. I changed to a different DE, and aparently it didn't want to boot so now i am stuck with a black screen. I have access to terminal, can anyone walk me through the termial commands to change back to a working DE? or get to the main login screen? [04:48] Psytonic, I think I can change it from ethtool like ethtool -s duplex half? [04:49] not a clue [04:50] Shano56, if you edit /etc/lightdm/lightdm.conf there will be autologin settings. Just place a # in front of anything that says autologin [04:50] okay ballyhoo, how can i edit it from terminal? [04:51] sudo nano /etc/lightdm/lightdm.conf [04:52] After you've made the changes, use ctrl-o to save and ctrl-x to exit [04:52] ty [04:53] hmm i see "dos format; mac format;append; prepend [04:53] or cancel [04:53] ignore those? [04:53] after pressing ctrl+o [04:53] After pressing ctrl-o, it should just ask you the name of the file. Just hit enter. [04:54] It'll overwrite the file. [04:54] ahh [04:54] cool [04:55] Changed to 10Mbps half duplex and it works now :) [04:56] anyone have insight on getting my kindle connected? [04:56] having mad troubles...not being recognized at all as far as i can tell [04:58] i just changed autologin to false, and it worked. many thanks! [04:59] No problem, Shano56 [05:01] mesees: Calibre might be your answer check this thread: http://askubuntu.com/questions/133573/is-there-a-way-to-get-a-kindle-fire-to-work-with-12-04 [05:02] lrcaballero, will do. thx [05:02] I'm instaling ubuntu desktop but my graphics card is internal and not supported (black screen after initial prompt) All i have access to is GRUB, is there a way to force VESA mode (nomodeset) through grub? [05:03] I've been working on this for days! :S [05:03] randum: try install lubuntu [05:04] !info lubuntu-desktop | randnum [05:04] randnum: lubuntu-desktop (source: lubuntu-meta): Lubuntu Desktop environment. In component universe, is optional. Version 0.38 (precise), package size 1 kB, installed size 30 kB (Only available for i386; amd64; powerpc; ia64; sparc; lpia; armel; armhf) === lenshark is now known as pneftali [05:11] hi. I have mediatomb installed. But I don't want the service to start sutomatically at boot. Rather I want to run it myself when I want to. How do I do that? [05:11] Hi! [05:11] !info bum | papul [05:11] papul: bum (source: bum): graphical runlevel editor. In component universe, is optional. Version 2.5.2-1 (precise), package size 83 kB, installed size 520 kB [05:12] lotuspsychje: thanks! [05:13] I just ran Ubuntu with 1 GHz and 512 MB RAM, and it was usable for about 20 minutes until I kept on having to force-quit everything. How well should it run once I upgrade it to 2 GB? [05:13] Ariii: much better in my opinion [05:14] Ariii: but for such a system i would recommend lubuntu instead of ubuntu [05:14] iceroot: Oh thanks! Occasionally it was sort of unresponsive. [05:15] entries for smbd and samba are not ticked in bum. Does that mean they won't start up automatically? [05:15] do I have to tick them? === Tux is now known as PermissionDenied [05:15] papul:indeed, thick what you wanna startup [05:16] lotuspsychje: I ran sudo service stop mediatomb. and now mediatomb is unticked [05:16] lotuspsychje: I am a bit confused [05:16] papul:tick and reboot [05:16] it will auto load then [05:20] l3top, my flash going too fast problem is back [05:20] lotuspsychje: I unticked mediatomb and rebooted. but mediatomb still runs on boot [05:21] anyone know hwo to set the default zoom in firefox [05:21] papul_:strange [05:21] Whenever I play a flash video or java applet, it runs way too fast. I've messed around with PulseAudio if that affects anything. === papul_ is now known as papul [05:22] lotuspsychje: yeah. this is one reason I hate ubuntu. very hard to configure what runs at boot and what doesn't [05:22] papul_: If you want MediaTomb to be started at boot time, change the NO_START option from "yes" to "" in the file /etc/default/mediatomb [05:23] papul_:all depends on wich package [05:26] hi [05:26] cg2916: did you update adobe flash recenlty? [05:26] what's the difference between lubutnu and regular ubuntu [05:26] can some one look over my cmake module and tell me why i can't find it .. it worked find in 11.10 http://askubuntu.com/questions/143457/cmake-module-and-opengl-on-12-04 [05:26] will the 'L'buntu 12.04 work on pentium 4 with 128mb ram?? [05:26] !lubuntu | randnum [05:27] randnum: lubuntu is Ubuntu with LXDE instead of !GNOME as desktop environment, which makes it extremely lightweight. See https://wiki.ubuntu.com/Lubuntu - /join #lubuntu for lubuntu support. [05:27] lotuspsychje, yes, but that was when i was trying to fix the same problem yesterday. it's not just flash, it's java too. the "activity" irc sound effect played too fast as well [05:27] randnum, ubuntu with lxde desktop for low hardware specification computer [05:27] cg2916:maybe try to set pulseaudio to defaults? [05:28] will the 'L'buntu 12.04 work on pentium 4 with 128mb ram?? [05:28] lubuntu, xubuntu or gnome classic [05:28] lotuspsychje, how do i do that [05:28] Abhijit: Openbox or Awesome [05:28] goddard, but no lxde? [05:28] Abhijit: lxde might work but i have no experience with it i am sure there website lists the recommend specs [05:29] goddard, ok [05:29] goddard, and lubuntu has openbox installed it it to be choose at login prompt right? [05:29] Do you guys know if that ath9k bug is fixed in the next ubuntu? [05:29] ok, my computer is actually new, it's just cheap and has those on board graphics. It's screwing up my install [05:29] Abhijit: should ya [05:29] Question what does opening DNS do? [05:29] Abhijit: i have like 5 WM installed and it works great [05:30] It will actualy install fine in text mode but it doesn't recognize my windows partitions and tries to overwrite them to GPT [05:30] hi [05:30] goddard, ok. and on lubuntu page they say desktop cd should not be used for less than 1gb system. but they do not tell what else to use? [05:30] lotuspsychje, how do i do that [05:31] goddard, here https://wiki.ubuntu.com/Lubuntu [05:31] cg2916:not sure mate, try man pulseaudio [05:31] Abhijit: there you go [05:32] goddard, they say to use alternate iso. but they do not tell how to use alternate iso with cd or in usb? they already told not to use cd? so do i assume that i shold to use alternate iso from usb? [05:32] Question what does opening DNS do? [05:32] what's funny is that I actually bought a new graphics card just so I could isntall ubuntu and my computer doesn't recognize the card and it's a PCIe card [05:33] lotuspsychje, doesn't really help [05:33] randnum, you shold first check on ubuntu site for supported/certified hardware in such caase [05:33] Abhijit: i dont see why burning a cd wouldn't work [05:34] Wow, now it works after a pulseaudio restart [05:34] goddard, ok i will try it. thanks [05:35] cg2916:how did you restart [05:36] MurdOck: you mean OpenDNS? === ubuntu is now known as Guest1776 [05:37] Witam [05:37] !pl | Guest1776 [05:37] Guest1776: Na tym kanale używamy tylko języka angielskiego. Możesz uzyskać pomoc w języku polskim na #ubuntu-pl. [05:38] is it possible to make a file that automatically runs commands in terminal? === stack is now known as Guest9017 [05:39] ??? [05:39] cody__: You mean a bash script? [05:39] i guess so [05:40] like when i click on it, it would run commands in termianl [05:40] terminal [05:40] Hi, is there a difference between root and a usr with root priviliges ? [05:40] cody__: Yep. You could use bash for that. [05:40] how would i do it [05:41] aks you not need to type sudo every time [05:41] usr w/ priv give you more protection of stupitity [05:41] chu: how would i do it? [05:42] akssps011_:if root makes a new user with root priviliges he haves same power [05:42] cody__: I'm just looking for some stuff, I'll be with you shortly. [05:42] chu:ok [05:43] lotuspsychje: oh, I mounted another machines / as nfs on my machine and accidently did chmod -R 777 on it. So is it possible to revert it back / [05:43] cody__: I think this is a good place to start with: http://www.codecoffee.com/tipsforlinux/articles2/043.html [05:43] akssps011_: if you are root yes [05:44] !chmod [05:44] An explanation of what file permissions are and how they can be manipulated can be found at https://help.ubuntu.com/community/FilePermissions [05:45] lotuspsychje: it was a remote machine., So if I ask someone to loginto it via root user and then ask him to execute chmod -R 755 would it do / (as of now I cannot ssh into the remote machine as well due to permission change) [05:46] akssps011_:yes root password can change anything you like [05:49] lotuspsychje: sorry, I lost the connection.This is he last I received from you: akssps011_: if you are root yes === debsan_ is now known as debsan [05:50] hello, can someone please help me out. I'm running ubuntu 12.04 and i have lm-sensors installed correctly however im looking for a desktop monitoring app that will read all my sensors [05:50] any help greatly appreciated [05:51] !info lm-sensors [05:51] lm-sensors (source: lm-sensors): utilities to read temperature/voltage/fan sensors. In component universe, is extra. Version 1:3.3.1-2ubuntu1 (precise), package size 97 kB, installed size 395 kB [05:51] lotuspsychje: after that I asked the question that I cannot ssh into the machine since it doesn't allows so after changing the permission. So if I log into it with root user and chmod -R 755, things should somewhat improve ? [05:51] ghostconn: i think there are few more apps for lm-sensors to install, check software centre [05:51] lotuspsychje: just wanted to confirm, since I do not want to commit the same mistake again [05:52] akssps011_:root can change or undo everything mate [05:53] lotuspsychje: thanks. Looks good if I after this mess the system allows to login as root [05:54] ghostconn: http://ubuntuforums.org/showthread.php?t=1956965 [05:54] what level of C expertise is needed to participate in the development of the ubuntu source code development? can anyone do it? [05:55] !dev [05:55] Interested in becoming an Ubuntu Developer? Get started here: https://wiki.ubuntu.com/UbuntuDevelopment [05:55] !dev [05:56] justaguest: you might wanna join #ubuntu-devel [05:56] LOving Pinguy...does anyone have compiz on it? [05:57] is there a better image manipulation program than gimp [05:58] pinguy_:join #pinguyos [06:01] SecretFire:maybe this will help: http://www.reddit.com/r/Ubuntu/comments/vszo7/cant_stand_gimp_anymore_alternatives/ [06:01] im trying to make a shell script lets say i wanted it to open a file on my desktop how would i do that [06:03] cody__:is this what you want? http://askubuntu.com/questions/143921/how-to-make-shortcut-to-terminal-application [06:04] yes [06:04] ty [06:04] cody, just create a text file beginning with the line: #!/bin/bash and then write the terminal command(s) you want. Then save and sudo chmod +x myscript.name [06:05] hey .there can somebody help me with a small command line question [06:05] ? [06:05] !ask [06:05] Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience [06:06] thanks ,,well i want to sort the mozzila bookmarks using pipelining in terminal ,is that possible [06:06] ? [06:06] *mozilla [06:07] I am not familiar with it. Let me look at the format. How do you want them sorted? alphabetically? [06:07] yeah [06:07] the thing that was troubling me was that the bookmarks are in a json format [06:07] how do you extract that [06:07] ? [06:09] l3top: thank you so much [06:10] Greetings, everyone. I have a question. Is it preferred to install GNOME Shell through APT or should I just install the Gnome Shell Remix version of 12.04? [06:10] ballyhoo, depends on your wish [06:10] where is the bookmark file borax12? [06:10] if you want an entirely new os flavour [06:11] borax12, I want to be able to use GNOME Shell with 12.04, but I heard it was buggy if you just installed it on top of a Unity install. [06:11] Is this true? [06:11] L3top, its in .mozilla [06:11] folder in your home [06:12] well not aware of the bugs ,but i have it installed ,works fine [06:12] but on a regular basis ,i prefer using unity ,have gotten used to the workflow [06:13] Thanks, borax12. I have been using Unity, but there are little quirks here and there that kinda bother me. [06:13] like ? [06:13] if you're used to gnome 2.x, unity takes some getting used to. [06:14] Sometimes Firefox doesn't put the menu at the top. The labels on the launcher don't always show up. [06:14] It's little things like that. Nothing huge. === debsan_ is now known as debsan [06:14] the labels on the launcher? [06:14] ballyhoo, [06:14] hey [06:14] thats not [06:14] how to i run a command in shell as root? [06:15] a issue of unity ,thats because of missing desktop entries [06:15] add sudo [06:15] okay [06:15] sudo.. [06:15] borax12, that might be a holdover from my /home being used on other distros. [06:16] could be ,well i have single distro in my system ,but ballyhoo ,you could very well go with gnome shell [06:16] i find it a bit cubersome to operate though [06:16] Excellent, borax12. I came over from Fedora so I was used to GNOME Shell. [06:17] ah i see ,nice ...i was kinda impressed with how vanilla fedora tries to keep its desktop environ ... [06:17] when i put sudo in front of the command it asks for the password i type it in and my terminal disappears [06:18] cody__, [06:18] I found it pretty nice, but they just didn't have the applications that Ubuntu did. [06:18] what command are you trying to run [06:18] Like my Humble Indie Bundle games and such. [06:18] ? [06:18] i have this program hamachi [06:18] ....thats true ...... [06:18] and i need the run the command sudo hamachi login [06:19] so after entering the password [06:19] and pressing enter,the terminal closes ? [06:19] yes [06:19] when i run the command in normal terminal it works fine [06:20] borax12: do I have to deal with folders? Or just the actual bookmark links? [06:21] L3top, links ....:) [06:21] borax12: any ideas [06:21] cody__, have a look at here - did you follow these instructions http://www.youtube.com/watch?v=p9wL3adKdhU [06:24] borax12: yes that is how i did it [06:24] well thats strange ....wait i will check on [06:25] ok [06:27] cody__, have a look at here,the login process seems to differ - http://dougmelton.com/other-fun-stuff/hamachiubuntuhowto/ [06:28] should i do all those commands [06:33] cody__, you should if you want to work it out correctly ,but it seems you installed hamachi via apt-get .did you ? [06:33] no [06:33] ohk then it should work fine ,,search for a 12.04 alternative if you can(search result ) [06:35] do you think pause would stop it from shutting down? === zixem is now known as Zixem [06:37] hi, using "notify-send" the message window pops-up in the background of other desktop windows. i need the message to pop up ON TOP, otherwise there is no point. any idea? === anonymous is now known as Guest28406 [06:45] what is the command to run a program with shell script [06:47] any help? [06:47] sh [06:47] cody__: Uh... [06:47] cody__: sh scriptname.sh I think? [06:47] or just ./ [06:47] it has to be chmod +x though [06:47] Corey: make it executable [06:47] okay [06:48] if the program was called name.exe [06:48] what would the command be [06:48] exit [06:48] cody__: You'd need to set up WINE. [06:49] !wine | cody__ [06:49] cody__: WINE is a compatibility layer for running Windows programs on GNU/Linux - More information: https://help.ubuntu.com/community/Wine - Search the !AppDB for application compatibility ratings - Join #winehq for application help - See !virtualizers for running Windows (or another OS) inside Ubuntu [06:50] i have a program that allows me to open it called mono [06:52] Hi every one ! [06:54] and borax12 left... [06:56] can't download from midori ! [07:00] hello ! is there any one [07:01] !details | DuckDuckGo [07:01] DuckDuckGo: Please give us full details. For example: "I have a problem with ..., I'm running Ubuntu version .... When I try to do ..., I get the following output: ..., but I expected it to do ..." [07:03] L3top :i'm using ubuntu12.04 32 bit , i'm using midori browser and i'm want to download music and pdfs .How to do this in midori ? [07:04] dunno DuckDuckGo. Will download and see what is going on. [07:06] L3top: aria2 can use but i dunno how to use it with midori .I even try by right clicking on stuff and save item but it also don't work for me [07:09] works for me DuckDuckGo. [07:10] L3top: have you use right click and save [07:10] yes [07:11] L3top :ok ! Download any PDF from it or any software from source forg [07:11] give me a link or something [07:12] DuckDuckGo: where are you looking for your downloads? [07:13] auronandace: on google and utility from source forge .It ca't download them [07:14] DuckDuckGo: no, i mean where are you downloading them to, where are they being saved? [07:14] auronandace: i even try to download music from dilandau , but there it also don't work [07:15] auronandace: in download folder .I even check the option from preference [07:15] DuckDuckGo: that's what i was about to suggest === Maccer is now known as MaccerBNC [07:16] auronandace: can you tell me how to download from midori ? please [07:16] DuckDuckGo: checked they are not in your ~ folder instead? [07:17] they are not .When i try to download arai2 from source forge .It pop up a window and don't save anything . [07:18] auronandace: they are not .When i try to download arai2 from source forge .It pop up a window and don't save anything [07:18] DuckDuckGo: ls -ld ~/Downloads [07:19] permissions/ownership correct there? [07:19] L3top :drwxr-xr-x 2 ubuntu ubuntu 4096 Jul 8 05:58 /home/ubuntu/Downloads [07:19] Ubuntu bug 4096 in meld (Ubuntu) "meld: merge new debian version" [Medium,Fix released] https://launchpad.net/bugs/4096 [07:20] I noticed Google Talk doesnt have a Linux version, and pidgin isnt working. Any ideas on how to get Gtalk with Ubuntu? [07:20] *piding isnt working with Gtalk..it wont even connect [07:21] isn't that all browser based? === randnum is now known as RandNum [07:22] DuckDuckGo: works fine here, they go to the download folder [07:22] DuckDuckGo: how did you install midori? [07:22] RandNum: yea but it sucks [07:22] I think after 2 days I finally have dual boot ubuntu/windows working on my Lenovo computer...sigh [07:23] auronandace: from software center [07:23] RandNum: and they have Windows versions and pidgin is suppsoed to support it but it wont work [07:23] it's installing right now [07:23] DuckDuckGo: what file manager are you using? [07:24] !info smuxi-engine-xmpp | GeekAdmin [07:24] GeekAdmin: smuxi-engine-xmpp (source: smuxi): XMPP / Jabber / GTalk / Facebook Chat engine for Smuxi. In component universe, is optional. Version 0.8.9.2-2 (precise), package size 311 kB, installed size 868 kB [07:24] how can i disable the splash loading screen in ubuntu? [07:24] auronandace: i don't know ? [07:24] L3top: thanks [07:24] auronandace: i think aria2 [07:24] I'm getting a new laptop - is it possible to have it automatically/easily set it up so that it's exactly the same as my ubuntu desktop? I'm thinking of all the bash scripts, preferences, modified installs etc. I don't want to do them all by hand (and cant remember a lot of what I changed) [07:24] DuckDuckGo: i thought that was what you are attempting to download [07:24] goddard: I think you can press 'e' on the linux grub select screen and edit the quite splash [07:25] anyone has luck setting up reverse tethering using wifi to android smartphone ? [07:25] NastyNaz: you could just copy your /home folder. [07:25] *quiet splash [07:25] DuckDuckGo: what desktop are you using? [07:25] i basically want to make use of my HP laptop's internet to my smartphone [07:25] L3top: what about the programs that are installed in /etc/ and stuff outside of home? [07:25] RandNum: ok thats what i did thansk [07:25] auronandace: Linux ubuntu 3.2.0-23-generic-pae #36-Ubuntu SMP Tue Apr 10 22:19:09 UTC 2012 i686 i686 i386 GNU/Linux [07:26] oh... that... NastyNaz I would use remastersys to make a dvd that installs your stuff. [07:26] DuckDuckGo: i asked for your desktop [07:26] DuckDuckGo: is it just plain ubuntu (using unity?) [07:26] auronandace: compaq auronandace [07:26] L3top: ah that is exactly what I was looking for. Thank you. [07:26] auronandace: yup ! unity only [07:27] DuckDuckGo: ok, so the default file manager in unity is nautilus [07:27] I'm installing from a usb drive and I never know when it's time to remove the usb drive. It said it was time to restart so I selected 'restart' and pulled out the drive and now it's frozen [07:27] auronandace: hmm...ok ! [07:27] I think I fubar'd it up :( [07:27] DuckDuckGo: tried refreshing after a download (or opening up the download folder again?) [07:28] auronandace: can i ask you something [07:28] DuckDuckGo: go for it [07:28] RandNum: I wait until it turns off. After you hit restart it does some cleanup/unmounting... sounds like it got a bit fubared still running that stuff. [07:29] Wifi reverse tethering, nobody dare to do it? [07:29] what's the shortcut to get a terminal or something all I have is a unity background with a mouse but no sidebar or buttons [07:29] DuckDuckGo: aria2 is in the software centre, i just checked [07:29] auronandace: i hear that aria2 is used as download manager in midori .Can you tell me how to use it [07:29] !info aria2 | DuckDuckGo [07:29] DuckDuckGo: aria2 (source: aria2): High speed download utility. In component universe, is optional. Version 1.13.0-1 (precise), package size 1765 kB, installed size 4930 kB [07:29] DuckDuckGo: why are you trying to download it mana=ually? [07:30] auronandace: i have installed it using terminal .but i want to know how to use it now [07:30] auronandace: with midori [07:30] DuckDuckGo: i don't use download managers, i don't see the point === nikhil_ is now known as Guest3948 [07:31] sx_usr__: it depends on whether or not your wifi nic will allow you to do ad hoc ics really. https://help.ubuntu.com/community/Internet/ConnectionSharing/ [07:31] ugh, just forced shut downed my system. takes me back to 'install ubuntu' sigh [07:31] auronandace: they are... useful.. for.. [07:31] Hi, I just installed Ubuntu 12.04 from USB (ISO burn) to hard disk. On Live CD - I was able to use Super + w but not now [07:31] I wonder what "nomodeset" disables besides advanced graphics [07:32] RandNum: shutdown, and remove the thumbdrive [07:32] Evening. I'm trying to install ubuntu 10.4 on a fresh sata drive, however am stuck at 'installation type' [07:32] Hello peeps newb here, I have installed windows 7 on a net book, the configuration is that the windows 7 loader is installed on a separate drive than C drive now I have my grub installed on that loader drive, but windows 7 is not booting what must be the problem? [07:32] is there something i'm missing? [07:32] L3top, yeah, my ubuntu 12.04 has the ICS... [07:32] any help? [07:32] shani0610: have you tried any grub repair? [07:32] L3top, but i tried setting it up, but my Samsung Galaxy S2 running CyanogenMod 9 latest nightly build does not see it.... [07:32] L3top, what am I missing here? [07:33] it's just booting into windows now [07:33] "Hi, I just installed Ubuntu 12.04 from USB (ISO burn) to hard disk. On Live CD - I was able to use Super + w but not now" [07:33] auronandace: check this link https://bbs.archlinux.org/viewtopic.php?id=73504 [07:33] for some reason it's not recognizing the ubuntu install...something to do with boot loader? [07:33] All keyboard shortcuts are not working [07:33] Like Long press super [07:33] sx_usr__: I have no idea. Either your ssid is not being broadcast, your nic does not allow adhoc due to limitations... or you didn't set it up right. What is your wifi nic? [07:33] Evening. I'm trying to install ubuntu 10.4 on a fresh sata drive, however am stuck at 'installation type'. It presents no options and will not allow me to go further. Am I missing something? [07:33] Like Super + W [07:34] @goddard no, can you help? [07:34] DuckDuckGo: so its a commandline utility [07:34] : What are the installation types [07:34] there are none [07:34] L3top, how to check? [07:34] Can you explain steps you took [07:35] auronandace: yup ! this link tell you how to use arai2 for midori as download manager [07:35] I installed the new drive, booted to allow the system to discover the drive, restart with the boot cd in [07:35] and now i'm stuck here. [07:35] lspci | grep -Ei '(wlan|wireless)' might tell you sx_usr__ [07:35] new partition table, add,change,delete,revert...these buttons do nothing. it can see my devide (hd0) to install the bootloader in [07:36] DuckDuckGo: if i don't use it and don't know how to use it, how do you expect me to be able to explain to you how to use it? [07:36] L3top, returns nothing [07:36] Ok So you are trying to do custom installation [07:36] sx_usr__: is this a usb wireless? [07:36] so I installed Windows 7, shrank the disk to half it's original size. Left a bunch of free space for Ubuntu, installed Ubuntu in that free space then restarted and it went straight into Windows 7. Anyone know what's causing that? [07:36] Is there other OS on the system [07:36] L3top, nope, it's built-in to my laptop (HP EliteBook 8540w) [07:37] Guest3948 - No, as I said it's a fresh drive [07:37] purchased all of an hour ago [07:37] Ok [07:37] RandNum: grub didn't install for whatever reason... [07:37] So your system bios is loading a drive [07:38] Yes. [07:38] sx_usr__: can you please pastebin the output of: lspci [07:38] L3top, how do I pastebin? [07:38] Ok and what is the first screen that you get [07:38] !pastebin [07:38] For posting multi-line texts into the channel, please use http://paste.ubuntu.com | To post !screenshots use http://imagebin.org/?page=add | !pastebinit to paste directly from command line | Make sure you give us the URL for your paste - see also the channel topic. [07:38] are you able to [07:38] Live CD boot [07:38] Yes. [07:38] L3top: hmmm. I should be able to go into repair mode and install grub somewhere ya? [07:38] L3top, i have pastebin installed in my ubuntu 12.04...but how do I use it on the command line? [07:38] it has to be abel to see the drive in ordder to check that you have at least 4GB space available [07:39] it can see i have the drive, and it has that space availaable [07:39] tthus allowing me to continue [07:39] !pastebinit | sx_usr__ [07:39] sx_usr__: pastebinit is the command-line equivalent of !pastebin - Command output, or other text can be redirected to pastebinit, which then reports an URL containing the output - To use pastebinit, install the « pastebinit » package from a package manager - Simple usage: command | pastebinit -b http://paste.ubuntu.com [07:39] however once we arrive at intallation types [07:39] there's just nothing [07:39] i can't continue, it says' not root drive selected' but there's nothing to select. [07:39] new partition table, add,change,delete,revert...these buttons do nothing. it can see my devide (hd0) to install the bootloader in. [07:39] when you click add do you get a new window [07:39] no [07:39] as I said, these buttons do nothing [07:40] !enter | Odiumx [07:40] Odiumx: Please try to keep your questions/responses on one line. Don't use the "Enter" key as punctuation! [07:40] caln't even click them [07:40] http://paste.ubuntu.com/1080801/ [07:40] But when you are live booting are you able to access that drive? [07:40] Never buy a cheap OEM computer [07:40] no. [07:40] Odiumx: can you pastebin the output of sudo fdisk -l from live boot? [07:41] L3top - where do I type that? [07:41] yeah [07:41] Ok [07:41] in a terminal Odiumx [07:41] Do Live boot - Try Ubuntu - open terminal [07:42] Ah, i thought it was odd L3top suggest I use the terminal from an instalation screen.... [07:42] L3top, did u see my pastebin i just sent to u? [07:42] L3top, http://paste.ubuntu.com/1080801/ [07:42] ok, well I'll be back in 30 minutes when the liveCD has started. [07:42] thx. [07:42] grub with dual boot and GPT on a non UEFI motherboard is hell [07:42] 30 minutes? [07:43] I am not able to use the keyboard shortcuts like Super, Super + w they were working in Live CD [07:43] takes a long time. [07:43] You don't have to actually run the full install odium [07:43] Booting the system will take 1 minute [07:43] and Odiumx you can just ctrl alt f2 to get to terminal... and you could sudo apt-get install pastebinit... then sudo fdisk -l | pastebinit [07:43] reinsert the CD and select "Try ubuntu" instead of "install" [07:44] hello all.where is python Module folder in ubuntu 12.04 [07:44] Anyone :( I am not able to use the keyboard shortcuts like Super, Super + w they were working in Live C [07:44] I just installed Ubuntu 12.04 [07:44] one moment sx_usr__ [07:45] L3top, okie dokie [07:45] L3top - ok thx. [07:45] and I am not able to switch to Unity, it is alway Unity-2d [07:45] L3top - fdisk -l returns nothing [07:45] sudo fdisk -l [07:45] "sudo fdisk -l" [07:45] i can ping by ip address but i can not ping by hostname.. [07:45] yes yes [07:45] sudo fdisk -l [07:45] does nothing [07:45] L [07:45] Ah. [07:46] smh [07:46] invalid option. [07:46] nobody can answer ? [07:46] sombdy can answer me?how to solve dns problem? [07:47] legoles that sounds like a simple google answer [07:47] let me google that for you [07:47] thanks :) [07:47] lol [07:47] sx_usr__: I don't think you should have a problem with that nic... I wouldn't expect it anyway. [07:47] bakshi: ping localhost fails? [07:47] no [07:47] i can ping nic [07:47] L3top, that's weird....but my phone just can't discover the wifi [07:47] i cant ping google by thire ip address [07:48] but i can not ping google by thire hostname [07:48] it mean it dns issue [07:48] sx_usr__: it means either your ssid is not broadcasting, or something went wrong during setup. [07:48] Am I going to have to install indows first? so that it can partition my new drive? before installing ubuntu? [07:48] L3top, ssid not broadcasting? how do I make it broadcast? [07:48] Odiumx: optional you can skip the installing windows part :D but yes it is usually done that way [07:49] : NO [07:49] Odiumx: it is recommended to install windows first because it overwrites the bootloader [07:49] Sorry to repeat again, I have installed windows 7 on a net book, the configuration is that the windows 7 loader is installed on a separate drive than C drive now I have my grub installed on that loader drive, but windows 7 is not booting what must be the problem? [07:49] do you remember what you set the ssid as? You should look at that link I gave you for step by step instructions. [07:49] shani0610: have you done a grub repair [07:49] L3top, i set it to "Private-AP" [07:50] when you put CD and it boots are you given option to try ubuntu .. I guess yes [07:50] yes [07:50] can you, in the phone, set that ssid rather than scan? [07:50] please tell me the command [07:50] but if ubuntu doesn't know how to setup a new drive, i'll just install windows instad [07:50] thx anyway [07:50] they used to recommend installing windows firrst [07:50] * Odiumx nods [07:51] Odiumx: if fdisk cannot see the drive... it is most likely how the drive is set to be recognized in bios [07:51] shani0610: http://www.howopensource.com/2012/05/reinstall-recover-grub-from-ubuntu-12-04-live-cd-usb/ [07:51] L3top, nope [07:51] Did you run fdisk -l [07:51] because it uses the old MBR bios system [07:51] well, I don't want to be running an po[erating system which depends upon another thirdy party operating system [07:51] l = london [07:51] it just seems silly. === root is now known as Guest24887 [07:51] well, I don't want to be running an po[erating system which depends upon another thirdy party operating system [07:51] WOW [07:51] NO [07:52] hey guys i googled my question but got no answer [07:52] thx anyways :D [07:52] where is python moudles folder on ubuntu 12.04 [07:52] Odiumx: ubuntu doesn't require anything. The drive is not being seen. Check the bios for sata mode: acpi/raid/ide [07:52] ? [07:52] haha [07:52] legolas: type "which python" [07:52] 2.7 [07:52] hello [07:53] nik [07:53] i have ubuntu 11.04 and i want to resize the harddisk [07:53] how ? move space is needed [07:53] more [07:53] Hi [07:53] help1111: use a livecd and gparted [07:53] hi [07:53] I need help .. I just installed Ubuntu 12.04 [07:53] legolas: try going to /bin and typing "file python" [07:53] help1111: back everything up first, and follow auronandace [07:53] and none of the keyboard shortcuts are working [07:53] Guest20896: with what? [07:54] from USB [07:54] I installed Ubuntu 12.04 [07:54] they were working in Live CD like Long Press Super [07:54] but they is not a python file. :( [07:55] !enter | Guest20896 [07:55] Guest20896: Please try to keep your questions/responses on one line. Don't use the "Enter" key as punctuation! [07:55] How can I install gtk+ > 2.4 in ubuntu 10.10? Installations is showing lots of errors. [07:55] what happens when you type just "python" [07:55] you get a python terminal? [07:56] my python is 2.7.3 [07:56] yea but just "python" [07:56] !eol | abhi_g [07:56] abhi_g: End-Of-Life is the time when security updates and support for an Ubuntu release stop, see https://wiki.ubuntu.com/Releases for more information. Looking to upgrade from an EOL release? See https://help.ubuntu.com/community/EOLUpgrades [07:56] nothing else [07:56] Can any1 help .. why am I not able to use the keys ... and it is always falling back to Unity 2d. But on Linux Mint if I install unity, keyboard shortcuts and unity works fine [07:57] I seem to have messed up grub when I deleted the partition that the default OS was on. I'm on a liveusb right now, how do reset the grub.cfg file ? [07:57] legolas: dpkg -S python | grep modules [07:58] dassie: sudo update-grub [07:58] tnx, how i [07:59] L3top, do I need to chroot into the right partition first? [07:59] how i can add a moudle to them? [07:59] that's not what this chat is for legolas [07:59] dassie: if you want to install grub (sudo grub-install) yes... I am not thinking it is necessary for the update dassie [07:59] ok can you answer me? [08:00] That is not an ubuntu support issue legolas. Try #python [08:00] plz someo one answer me for my dns issue [08:00] but it is not in windows it is on UBUNTU [08:01] i can not ping hostnam but i can ping by ip addresses [08:01] #python is not "windows" [08:01] L3top, it asks for a install device first...what is this arg supposed to be? [08:01] L3top: I'm in my rescue mode installation now. I have #1 primary ntfs Boot partiton, #2 primary ntfs, #3 ext4, #4 swap. I don't have a grub boot location? [08:01] it's not booting Ubuntu [08:01] dassie: for instance /dev/sda === legolas is now known as legolas_ [08:02] help me plzz [08:02] L3top, in that case it tells me "cannot find device for /boot/grub (is /dev mounted?)." [08:02] RandNum: grub lives in the MBR of the boot drive... again... typically /dev/sda [08:03] bakshi: qry [08:03] i am using ubuntu 12.04 mini.iso after installing in system..i can ping only ip address.i can not ping hostnmae [08:03] dassie: then perhaps you do have to bind /dev and chroot into it. Sorry. [08:03] !patience | bakshi [08:03] bakshi: Don't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. While you wait, try searching https://help.ubuntu.com or http://ubuntuforums.org or http://askubuntu.com/ [08:04] bakshi, okey,what the problem [08:04] L3top, I've already chrooted into OS that I normally use [08:04] i can ping google by thire ip address but i can not by hostname..so its dns issue..so what is solution [08:04] Installing gtk+ in ubuntu 10.10 [08:04] good bye all thank you for your helps [08:04] :D [08:04] and resolv.conf is not found in /etc [08:04] abhi_g: 1010 is eol. It is no longer supported. [08:05] how can i build it from source? [08:05] L3top, using it from the liveusb i get the same results [08:05] it is NOT SUPPORTED abhi_g. This is ubuntu support. [08:05] bakshi, try to fill resolv.conf? [08:05] abhi_g: step no. 1: install a supported version of ubuntu [08:06] there not resolv.conf in my /etc.but i creat manully and i put my nameser [08:06] in wine i have no option to change the audio driver which according to the setup i read should be OSS but since there is no option for that it is using winealsa.drv, idk if this is the main problem but i get s static sound when i play music through spotify. Any help? [08:06] dassie: I am not sure what you have done, or where you are at I am afraid. When you say you have already chrooted into the os you use... I don't know what that means. I do not know what you are doing exactly in live boot. Have you bound /dev to the /mountpount/dev ? [08:07] hi guys can anyone help me with a fingerprint reader problem [08:07] bakshi, okey ..what the result? [08:07] same..not solve [08:07] resolv.conf not located it mean dns is installed? [08:08] L3top, I'm not sure what that means, that is to "bind /dev" to something. could you elaborate please? [08:09] dassie: sudo mount -o bind /dev /mountpoint/dev where mountpoint is where you mounted it. [08:09] if I go into "rescue mode" from the liveCD(usb) there is an option that says "Install the GRUB boot loader on a hard disk" but when I select it, it asks me how I want to partition my drive. I've ALREADY partitioned it. i just need it to load. [08:09] L3top, this would be entered in the liveusb ? [08:10] Btw, before I meant I was chrooting into the partition that holds the ubuntu installation that i want to use [08:10] It is not the case that ubuntu depends on windows, however I wonder how to format and partition a new drive with ubuntu, so that I can carry out the install without need MSW ? [08:10] dassie: this is what I was saying... I don't know where in the process you are. If you have MOUNTED and CHROOTED then THERE [08:10] can anyone help please [08:10] how i fix my wine so my audio in spotify doesnt sound like a bad radio station?? [08:10] Odiumx: did you check your bios sata mode? [08:11] I haven't, no. [08:11] I've used the windows installer to parttion my drive, and am hoping that will have some effect on the ubuntu install. [08:12] Your ubuntu installer will recognize the widnows install and ask if youw ant to install ubuntu along with windows [08:12] I haven't installed windows [08:12] it's a fresh drive [08:12] i bought it an hour ago [08:12] never been used [08:12] Odiumx: due to various reasons, usually the bios sets this mode to acpi, and this can cause issues that setting it to ide mode fixes. [08:12] Odiumx: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation. [08:12] does anyone have any experience with fingerprint readers [08:12] anyone here running backtrack? [08:13] !backtrack | vendetta_returns [08:13] vendetta_returns: There are some Ubuntu derivatives that we cannot provide support for due to repository and software changes. Please consult their websites for more information. Examples: gNewSense (support in #gnewsense), Linux Mint (see !mint), LinuxMCE (support in #linuxmce), CrunchBang (support in #crunchbang), BackTrack (support in #backtrack-linux), Ultimate Edition [08:13] * L3top needs a smoke... bb in 5 [08:13] I have experince with fingerprints readers [08:13] L3top - I doubt my bios has changed, as it's a replacement for a recently failed drive. [08:14] vendetta_returns, i have a hp dv6-6023 but i can get the fingerprint reader to work [08:14] Cirustus: What's your o/s? [08:14] What problem are you having now Odiumx? [08:14] vendetta_returns, ubuntu 12.04 [08:14] I'm unable to install ubuntu. [08:14] I get stuck at the 'installation types' screen, it's simply empty. === ubuntu is now known as Guest78198 [08:15] Cirustus: I'm a Newbie To lunix sorry... But if it was windows another story [08:15] vendetta_returns, i tried installing fingerprint-gui but i cant detect the reader [08:15] vendetta_returns, works fine in windows :) [08:15] Hi, I am having trouble installing ubuntu 12.04 on a partition of my new ssd disk, it shows me a message that I have a faulty harddisk, has this something to do with ssd? [08:16] Odiumx I'm experiencing problems and resolutions involving ubuntu installation and partitions. However, I'm not familiar with the "instalation type" screen. I'm using the alternate isntall [08:16] As you see my nickname, I am now in the guest session after the failed installation so running form live usb now [08:16] type /nick to change your nickname === Guest78198 is now known as BWorld [08:16] Aah, i see. [08:17] thanks cirustus [08:17] I just finished installing windows and ubuntu, but my grub installer isn't installed properly it's not just installing into windows [08:17] BWorld, no probs, as for installing on a ssd im not too sure how to solve that never used one [08:17] hmm.. [08:18] Maybe someone else has experience with this ? [08:18] RandNum, does he grub loader show up? [08:18] no, only when I boot into rescue mode from the CD do I see the ext4 and swap partitions [08:18] the only boot parition is MBR ntfs for windows [08:19] I'm not sure if I should manually create a new partion for EFIboot, or biosgrub, or try to isntall it some other way [08:19] if i have a main partitino then swap file parition then a freee space partition. how can i move the swap partition to the end ? [08:19] free space isn't numbered like swap [08:20] i created it right now [08:20] i need to resize the main parition for ubuntu [08:20] but swap parition in the middle [08:20] and the new created free space is after the swap parition [08:20] RandNum, gimmie a sec looking for the web page that will help [08:21] help1111: you should have just run the installer with the full windows drive. It would have done all of this for you. [08:21] or maybe I can use the windows MBR to somehow boot into ubuntu as an option... [08:21] I'm so close to getting this to work [08:21] RandNum, try this page it should help https://help.ubuntu.com/community/Boot-Repair [08:21] k, thanks [08:21] RandNum, no probs [08:22] l3top ubuntu is 2 years old .. i can not redo everything again [08:22] too much work [08:22] i need extra space only [08:22] RandNum: yes... grub installs there, and gives you the option to boot into windows or ubuntu... not in a partition, but on the drive assignment... ie /dev/sda not /dev/sda2 etc [08:23] can anyone help me with my fingerprint reader prob in ubuntu 12.04 [08:23] liveCD option doesn't allow me to install the grub installer manually for some reason [08:23] I click that option and it just asked me to partion the drive again [08:23] help1111: I misunderstood. [08:23] RandNum, do it via terminal [08:23] i tried selecting just the /dev/sda (that represents the entire drive) but that was to actually reformatt and partition the drive so i said no. [08:24] k, I'll read this article hopefully I can do it from the terminal like yous suggest brb [08:24] RandNum, do the 2nd option from live cd worked for me [08:25] I have other issues with the live CD...I'm actually technically not in the main LiveCD menu options I'm using the Alternative LiveCD text based only options which are a little different. The first screen is basically a grub menu/shell with an option to install or rescue. from there I get some text based options. anyway I'll read this article and be back [08:26] RandNum, no probs never done the alternate myself so cant help there [08:31] Why on earth would anyone want to use unity? [08:31] no one does :P [08:31] Gnome! [08:31] hi [08:31] or KDE [08:32] Gnome is almost perfect, having unity on a desktop is about as efficent as using the android layout on a desktop [08:32] !ot | lolcat [08:32] lolcat: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics (though our !guidelines apply there too). Thanks! [08:32] but it's nice until you can isntall gnome [08:32] any one can help me [08:33] what's your question atheer [08:33] atheer: thanks for the offer but the mind readers are on strike, so you do have to state your question. [08:34] so can anyone help me with my fingerprint reader problem? [08:34] I don't remember the question cirustus [08:34] i dont now how can i use chat with my frined in yahoo mass.... [08:35] RandNum, im trying to get the fingerprint reader working on a hp dv6-6023 but with no luck [08:35] did the drivers install ok? [08:35] atheer: Probably pidgin. [08:36] RandNum, not that i see and i cant seem to find any for it atm [08:36] hmm, have you tried aptitude? [08:37] RandNum, im guissing thats a program to install [08:37] *guessing [08:37] yea, it helped me find obscure library files once [08:37] sudo apt-get aptitude? [08:38] RandNum, ok ill give it a try and get back to you [08:38] why would you need aptitude? [08:38] you don't NEED it [08:38] I found it helpful just because it's gui is intuitive. [08:40] hello [08:40] l3top youd don't happen to know of a way to install the grub boot loader from terminal do you? [08:40] how can i obtain source package of a ppa? [08:41] I'm in a "try ubuntu" session now witha terminal [08:42] cirustus: http://ubuntuforums.org/showthread.php?t=760018 [08:42] L3top, ill look at that now [08:42] RandNum: what partition is your ubuntu install on? [08:43] L3top, i tried that it couldnt find the device so im now trying to find the drivers [08:43] dev.sda6 [08:43] oh [08:43] here's something dev.sdb1 is Device Boot [08:44] cirustus: sudo apt-get fprint-demo [08:44] but I ahve 6 partitions of sda and this lone sdb1 out here that no one can find [08:44] L3top, already did and still no luck [08:44] the first 2 are windows the sda3 is extended, sda5 is swap and sda6 is / [08:45] ? [08:45] one moment RandNum. [08:45] L3top, this is a recently new laptop came out this year so im guessing drivers havnt been made for it just of yet [08:45] cirustus: well it is on the unsupported list http://www.freedesktop.org/wiki/Software/fprint/libfprint/Unsupported devices [08:46] I just saw some people got theirs working there. === thomas is now known as CowboyTom [08:47] Hi! I'm looking for a software to test audio CDs for skipping errors and such without having to listen to all of them. Could someone help? [08:47] you know I could probably use the graphical installer to help me with this. It asks you where you want to install the boot loader. [08:48] RandNum: sudo -s [08:49] RandNum: mount /dev/sda6 mnt; mount -o bind /dev mnt/dev; mount none -t devpts mnt/dev/pts; mount none -t sysfs mnt/sys [08:49] well i know if i ever want a laptop with fingerprint reader ill get a thinkpad as they seem to work well [08:49] RandNum: chroot /mnt [08:49] cirustus: Yeah, I'd not run Linux on a laptop that wasn't a Thinkpad. [08:50] Corey, atm im currently using a toshiba satellite but it has no reader so im all good with that [08:50] RandNum: grub-install /dev/sda; update-grub [08:50] Corey: runs 100% ootb on my dell D620 [08:50] mount /dev/sda6 mnt; "mount point mnt does not exist" [08:50] Ah, found out about qpxtool.... Sorry folks, see you all! [08:50] ActionParsnip, i finally got my tripple boot working [08:50] grrr [08:51] RandNum: change mnt for /mnt [08:51] sorry that ^ [08:51] How do I add something to the PATH variable? [08:51] cirustus: nice, was it updates? [08:51] ActionParsnip: Isn't the D620 five years old or more? [08:51] !list [08:51] beberon: No warez here! This is not a file sharing channel (or network); read the channel topic. If you're looking for information about me, type « /msg ubottu !bot ». If you're looking for a channel, see « /msg ubottu !alis ». [08:51] ActionParsnip, no i reinstalled 2008 as it lost the boot laoder the did grub boot recovery afterwrds and it all shows up now [08:51] I think you mean /mnt [08:51] saint__: in ~/.bashrc add a line: PATH=$PATH:/new/folder/added [08:51] k, trying this thanks l3top! [08:51] How do I add something to the PATH variable? [08:52] Corey: maybe, still works though.. [08:52] !list [08:52] ActionParsnip: Yeah, I made the mistake of buying a Thinkpad as soon as the new model came out. Took six months to get hardware support across the board. [08:52] beberon: Not that kind of channel or network. [08:52] Corey: thinkpads are solid systems though [08:53] cirustus: nice [08:53] ActionParsnip: Indeed. Though I do have a fondness for my Macbook Air. [08:53] <[Trident]sammy> CryptoHelper in python comes under which module? [08:53] ActionParsnip, took a lot of playing around but i got it all working in the end was frustrating at points though [08:54] hello [08:54] hi [08:54] sorry for the missing mounts RandNum. Did a bad sed. [08:54] I'm an ubuntu noob. I've managed to disable unity (12.04). Now I'd like to have compiz-fusion effects. Could you help me please ? [08:54] missing /mnt I mean RandNum [08:55] I think it's working L3top :) [08:55] Corey: i'd buy something that was similar in speed to the macbook and save a whole heap of cash [08:55] bioman... how did you "disable" unity? [08:55] finished updating grub :) [08:55] scared to test it haha [08:56] RandNum: give it a reboot [08:56] L3top: I've found on Internet [08:56] That is not an answer bioman [08:57] sigh, it went straight into windows again. [08:57] I felt like that was going to work too [08:57] bioman, did you follow this https://help.ubuntu.com/community/CompositeManager [08:57] L3top: http://www.hypnoz.net/informatique/ubuntu-12-04-desactiver-unity-et-utiliser-gnome/ [08:58] any hackers over here -.- ! [08:59] how do you even get a terminal in unity [08:59] RandNum: press CTRL+ALT+T [08:59] RandNum: if you use terminal a lot, I can recommend Guake [08:59] RandNum: can you please get me an output of sudo fdisk -l in pastebin? [09:00] yes sec [09:00] R3pLiCa: almost any user is a hacker... but... what are you going for? [09:01] pastebin.com/DgpArKT9 [09:01] l3top: nice explaining :p [09:01] http://pastebin.com/DgpArKT9 [09:02] RandNum: That really should have worked. [09:03] cirustus: thank you. it says install ccsm, but apt-get install ccsm says package not found [09:03] !info ccsm [09:03] Package ccsm does not exist in precise [09:03] I might just try installing Ubuntu first [09:03] and using its loader [09:03] !info compiz-configuration-tool [09:03] Package compiz-configuration-tool does not exist in precise [09:04] !info compizconfig-settings-manager | lotuspsychje [09:04] lotuspsychje: compizconfig-settings-manager (source: compizconfig-settings-manager): Compiz configuration settings manager. In component universe, is extra. Version 0.9.5.92-0ubuntu3 (precise), package size 1181 kB, installed size 5226 kB [09:04] although...then I'll have the problem of Ubuntu forcing the GPT partition schema on Windows and then it will cry... [09:04] yeah that1 lol [09:04] Hi, how can I set this permission on a file: rwsr-xr-x ? [09:04] bioman, not sure about it then as ive never changed my manager [09:05] RandNum: that will guarantee you are back in the same position. [09:05] RandNum: once you install windows that is... [09:05] yeah, this is the closest I've been to dual boot. I think installing windows first is best [09:06] akssps011_: chmod 755 file [09:06] is there a pastebin for images (screenshots) ? [09:06] akssps011_: r = 4, w = 2, x = 1 then add together the access you want, so r-x = 4+1 = 5 [09:07] RandNum: imageshack [09:07] how do i get compiz on here [09:07] pinguy 12.04 [09:07] pinguy_: its default installed [09:07] pinguy_: pinguy OS isn't supported here [09:08] How can i add ext4 support to initrdramfs? [09:08] cube effect too [09:08] how do i find out what graphics cards i have installed [09:08] pinnen: try #pinguyos [09:09] cirustus: sudo lshw -C display [09:10] hi all, just now installed ubuntu 12.04 on a machine with NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2). [09:10] cirustus: I like lspci -nnk | grep VGA -a2 faster... just the facts. [09:10] ActionParsnip, well there is my problem i have dual graphics cards but can only get drivers for one of them :/ [09:11] cirustus: https://help.ubuntu.com/community/HybridGraphics its a masive headache in Linux [09:11] ActionParsnip: I tried chmod 777 and then chmod +s but it changes to rws r-s r-x [09:11] the proprietary driver installed and now i am not able to access unity. i can access unity 2d [09:11] ActionParsnip: but I don't want that second s [09:11] So what's odd is that even after I elect to reinstall all of ubuntu it still doesn't properly install the boot loader...what could it be [09:11] I need to sleep though :S [09:11] akssps011_: look into: man chmod [09:11] mithun: you might wanna try lubuntu-desktop [09:11] please help the software centre cannot connect to internet [09:11] mithun: Can I please get lspci -nn | grep VGA [09:12] even though i am connected to internet [09:12] L3top, 00:0d.0 VGA compatible controller [0300]: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] [10de:03d0] (rev a2) [09:13] lotuspsychje, why lubuntu? i want to use unity. [09:13] ActionParsnip, yeah ive guessed i have intel and nvidia but intel takes the lead on it all lol [09:13] How can i add ext4 support to initrdramfs? [09:13] I wonder if I need an EFIboot partition [09:14] mithun: in my opnion unity2d doesnt run very smooth on a system that cant run unity properly [09:14] cirustus: I've followed the link. ccsm is set. But when I launch compiz --replace (Alt F2) no compiz effects :( [09:14] lotuspsychje, i am using unity2d just beacuse the other one stopped working when installed nvidia restricted drivers [09:15] bioman, again i havnt used it myself personally but i will look at it in amin for you and see if i can find a solution [09:15] Hi! I try to plug-in a TP-Link wireless adapter, and issued modprobe rt2800usb, but nothing happens. I think the usb subsystem doesn't recognise, as no such info in the log. How can I bring up this device as wlan0? [09:15] mithun: if your card can handle unity, did you try nvidia-current mithun: apt-cache policy nvidia-current | grep stall [09:16] that should be what the "restricted drivers" option installs lotuspsychje [09:16] cirustus: I thank you in advance :) [09:16] and his card should handle it [09:16] L3top, Installed: 295.40-0ubuntu1 [09:16] ActionParsnip, i dont even have switcheroo on this lappy :/ [09:16] Hello. [09:17] cirustus: if you want gaming, i'd go nvidia all the time :) [09:17] l3top do you ahve a link to where you got that remount grub.cfx from? :/ [09:17] さ [09:17] Could anyone be so kind and check which file format the "onboard" ubuntu keyboard uses for describing its keyboard layout? [09:17] cirustus: that link is all I know, I've see too many issues with dual GPU nonesense and will be avoiding it like the plague [09:17] ActionParsnip, i know i prefer it but it even uses intel in windows and i cant change it in bios even :/ [09:17] Is there any such configuration file, at all? [09:18] no RandNum. It is part of my snapshot maker on my machine. Like I said, I just did a sed to make it more suited to your needs [09:18] ActionParsnip, im starting to regret getting this lappy now [09:18] I've installed vls (12.04). Can't play a DVD :( [09:18] I mean vlc [09:18] !dvd | bioman [09:18] bioman: Ubuntu's default installation and repositories do not include packages needed to play commercial DVDs for legal reasons. For information on adding them, see https://help.ubuntu.com/community/RestrictedFormats/PlayingDVDs | For information on the legalities involved, see the "DVD" section of https://help.ubuntu.com/community/FreeFormats [09:19] bioman: you getting an error? [09:19] Is there any file format which stores keyboard layouts? [09:19] L3top, any help for me [09:19] please someone help me [09:19] bioman, what os are you using [09:19] I am thinking mithun. [09:19] !ask | ripthejacker [09:19] ripthejacker: Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience [09:20] L3top, thank you [09:20] i asked but no one replied [09:20] please help the software centre cannot connect to internet [09:20] L3top, but i wonder why there are no other nvidia users out there in this channel to help [09:20] even though i am connected to internet [09:20] ripthejacker:any errors in /var/log? [09:21] I am pretty strong with graphics detection/utilization. Your pciid should have no problem doing this... so I am looking for what could interfere. [09:21] lotuspsychje, what error should i be looking for? [09:21] in my head movie... [09:21] brb smoke [09:22] I have a silly question... I'm not sure if here's the right place. If I ssh to my server I can run the command "SASS" just fine; which is in "/var/lib/gems/1.8/bin" -- But my Apache/WSGI/Django server doesn't see it. [09:22] !patience [09:22] Don't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. While you wait, try searching https://help.ubuntu.com or http://ubuntuforums.org or http://askubuntu.com/ [09:22] ripthejacker:anything related to software centre, or trying to install [09:22] I get the error /bin/sh: sass: not found [09:22] To be clear mithun... you have rebooted since this was installed right? [09:22] L3top, yes i have rebooted [09:22] Although through ssh I can see it fine -- and I've added ``export PATH=$PATH:/var/lib/gems/1.8/bin`` to my .bash_rc [09:23] SteveRyherd: To *your* bashrc, not apache's [09:23] lotuspsychje, not specific to software center [09:23] ripthejacker> the source server you have chosen maybe down at the moment [09:24] no [09:24] NSAgent, Would it be smarter to add it to Apache's .bash_rc then, or make a link to a different bin? [09:24] ripthejacker: maybe this can help: http://askubuntu.com/questions/100057/ubuntu-software-center-not-working-check-your-internet-connection [09:24] platius, actually i am not using the system method to connect to internet. I am using another package rp-pppoe [09:25] SteveRyherd: I don't know that apache uses bash. Try adding it to /etc/profile instead [09:25] platius, so even the network manager thinks i'm not connected to internnet [09:25] *internet [09:26] mithun:pastebin xorg.0.log would be very handy [09:26] hi [09:27] lotuspsychje, hey i dont think there is so much to troubleshoot. this is definitely a common problem for nvidia users out there [09:27] lotuspsychje, the same problem people are facing since when nouveau was introduced to linux kernel [09:28] ripthejacker: if you run: sudo apt-get update does it run ok? [09:30] Using 12.04 without unity. Cannot run compiz. Please help [09:30] bioman: what video chip do you use? === Dorito is now known as Guest78263 [09:32] bioman, im not sure then as the instructions are whiole still using unity [09:33] bioman, to know what GPU you use, you may type in a console "lspci | grep Video" [09:33] bioman: or: sudo lshw -C display [09:33] hi cirustus : what would prevent anyone from running Compiz in Precise ? [09:34] melodie_: no 3D accelleration [09:34] it might have to be chosen at the login screen : is that the idea ? [09:34] ActionParsnip, sure, then maybe it is necessary to install the latest mesa packages available [09:35] Bonjour je n'arrive pas a installer quake comment faire? [09:35] some chips work well with all mesa family (no need of the devel packages or testing package of course, but the rest has helped some people) [09:35] olivier, vas sur #ubuntu-fr [09:35] melodie_: NVidia GT555M [09:35] hey how do I paste into putty? I cannot with ctrl V or right click or MMB or RMB or ctrl + insert + insert [09:35] bioman, have you installed the nvidia driver from the Synaptic package manager ? [09:36] bhavesh, have you tried Ctrl+Shift+v ? [09:36] melodie_, does not work [09:36] bhavesh, what is your console ? [09:37] ttnux i am ere [09:37] melodie_, how do u mean what is my console? [09:37] melodie_: no... think I'm using nouveau [09:37] gnome-terminal, or lxterminal, or else ? [09:37] bioman: did you install the nvidia-current package [09:37] bioman, try nvidia [09:37] melodie_, its PuTTY's own console [09:37] just install it, reboot, remove nouveau, reboot, this kind of method may be ok [09:37] ActionParsnip: I'd like to keep nouveau, and make it work [09:38] bhavesh, could you try something else than putty ? what is the aim ? remote control ? [09:38] melodie_, yes [09:38] tnux are you there [09:38] melodie_, controlling a VPS [09:38] can't you ssh the remote machine ? [09:38] can I do that with my ubuntu terminal? [09:38] Hi all, me again [09:39] bioman: not sure if compiz likes nouveau [09:39] ill google it [09:39] bhavesh, perhaps, you might need to give it a try to see what [09:39] bhavesh: remote control to achieve what? [09:39] bhavesh, just try : [09:39] I'm having a problem with Ubuntu where the sound keeps popping [09:39] ActionParsnip, control a VPS [09:39] ssh login-name@ip-of-the-remote-machine [09:39] bhavesh: won't you be using a terminal anyway? [09:40] Yoshi2889, how many sound cards does this machine have ? [09:40] I did not know that it even works with a terminal.. [09:40] melodie_: It has build-in speakers [09:40] it's a laptop [09:40] bhavesh, I think the putty window is a terminal, so... [09:41] Yoshi2889, what kind of sound pops up ? [09:41] sort of notifications ? [09:41] melodie_: Just a pop, no sound really but a pop [09:41] ActionParsnip: :( [09:41] bhavesh: if you are just going to open a terminal on the remote desktop, why not just use an ssh client and connect that way, much less bandwidth :) [09:41] ActionParsnip: so please how-to install NVidia proprio drivers ? [09:41] ActionParsnip, Im trying that [09:42] :) [09:42] bioman: sudo apt-get install nvidia-current [09:42] Yoshi2889, 2 possibiilities : blacklist pcsp and pcspkr in the /etc/modprobe.d/blacklist file [09:42] the other one find in the gnome-control-center a gui where you can set up the notifications to "no sound" [09:42] ActionParsnip: thank you very much [09:42] either or may work [09:42] bioman: np dude [09:43] melodie_: blacklist.conf ;) all the files in the modprobe.d must end in .conf (no idea why) [09:43] melodie_, PuTTY uses its own terminal, which is on the right: http://i.imgur.com/NwrM5.png [09:43] and my ubuntu terminal is on the left [09:43] Sorry my machine locked up [09:44] ActionParsnip: might you know which version of NVidia driver it installs ? [09:44] ActionParsnip, yes apt-get update working fine. [09:44] !info nvidia-current | bioman [09:44] bioman: nvidia-current (source: nvidia-graphics-drivers): NVIDIA binary Xorg driver, kernel module and VDPAU library. In component restricted, is optional. Version 295.40-0ubuntu1 (precise), package size 32650 kB, installed size 96032 kB (Only available for i386; amd64; lpia) [09:44] melodie_: Weird, it stopped now [09:45] ripthejacker: any warnings? do you use a proxy for web access? [09:45] Anyhow, ActionParsnip, glad that you mention the NVIDIA driver === nagarjuna is now known as nn [09:45] melodie_, ActionParsnip: YAY ty, I can now use my VPS with my terminal :D [09:45] ActionParsnip, no [09:45] bhavesh: sweet, much quicker too, and secure :) [09:45] and no proxy direct connection [09:45] ok, all too verbose for me here, I leave you and wish all a nice sunday [09:45] bye [09:45] and I can copy paste [09:45] ripthejacker: ok, run: sudo apt-get upgrade to get full updates [09:46] I have a GeForce 560 Ti, but when I try to load up the Live CD (or live USB in my case) my screen keeps flashing and UBuntu doesn't seem to recognize my full screen resolution [09:46] Yoshi2889: use the boot option: nouveau.blacklist=1 [09:46] upgrade wont upgrade ubuntu 11.1 to 12, will it ? [09:46] ActionParsnip: Thanks, how can I add that option? === nn is now known as nag9 [09:47] !bootoption | Yoshi2889 [09:47] Yoshi2889: For a list and explanation on some of the boot options, see https://help.ubuntu.com/community/BootOptions See also !nomodeset. [09:47] ActionParsnip, upgrade wont upgrade ubuntu 11.1 to 12, will it ? [09:48] ripthejacker: no, changing to the next release is a whole different lot of commands [09:49] ActionParsnip, yes, done, actually i updated just an hour ago ,so no new updates [09:50] ripthejacker: try: sudo apt-get --reinstall install software-center [09:50] will the DNS changer malware affect my ubuntu? [09:50] bhavesh: not heard of that [09:51] bhavesh: seems to be mac and windows only [09:51] ok i made a mistake installing bubmblebee is its removed my nvida graphics card [09:51] :) [09:52] ActionParsnip, yes did but still no good [09:52] ActionParsnip, i think the problem is with network manager [09:52] ActionParsnip, it does not think i am online [09:53] Thanks ActionParsnip, and ubottu of course :P, I will try that somewhere later today :) [09:53] ripthejacker: i've seen issues with network manager / software centre. Could try synaptic I guess [09:54] Any tips availabel on hooking up to a projector via hdmi? I tried but could not look at the projected image at the same time as the laptop image. [09:54] Other than that it worked great. [09:54] wubino: what laptop? [09:54] ActionParsnip, i can use synaptic but i though i could use better gui :P [09:54] ripthejacker: 'better' is subjective :) [09:55] ActionParsnip, well then for the reason they put software center. [09:55] i solv my dns problem now i am having a error [09:56] initscript resolvconf job :failed to start [09:56] ripthejacker: try: echo "nameserver 8.8.8.8" | sudo tee /etc/resolv.conf > /dev/null [09:56] ripthejacker: then close and reopen software cnetre [09:56] help me for this eeor [09:56] bakshi: what makes the error occur? [09:58] bakshi: and what is the output of: lsb_release -sc [09:58] ActionParsnip, how do I close connection with vps without closing terminal? [09:58] when i am install package it said error [09:58] ActionParsnip: Samsung QX NotePC QX411 [09:58] bhavesh: if you want the apps you run to keep running after you leave, you can look into screen [09:58] out put is precise [09:58] wubino: why was that not in your initial question? [09:59] ActionParsnip, can you please tell me what that command does? [09:59] I am talking about logging out of ssh [09:59] this is whol eeror [09:59] http://paste.ubuntu.com/1080922/ [09:59] ripthejacker: changes your DNS to google's public DNS, may help. The file is generated at boot so a reboot will put it back how it was [09:59] bhavesh: same deal [10:00] ActionParsnip, i dont think its a problem with dns.I think its a flaw within USC that it looks at network manager to determine the connection. [10:01] Hi, can someone help me? I need a very litle thing, please [10:01] still i'll try that [10:01] I need to use this command "echo 0|sudo tee /proc/sys/kernel/yama/ptrace_scope [10:01] " to disable the Ubuntu 12.04's feature which blocks access of one application from another. But it gets enabled back after restarting. Any way to do it permanently? [10:02] ripthejacker: its worth exploring [10:02] ActionParsnip: I thought Ubuntu might have a key combination for this purpose like other OS's.... my bad. [10:02] Hello, I have ten of gEdit theme, where should I place them so I can use them? [10:02] I have ubuntu 12.04 [10:03] ActionParsnip, nope . still no good [10:03] Zuhaitz, ask the full question and someone should help [10:03] bakshi: try: dpkg --configure resolvconf [10:03] bakshi: try: sudo dpkg --configure resolvconf [10:04] ok brother wait.. [10:04] wubino: check the F keys on the top row, is there one to manipulate the disaply output? [10:04] sn [10:04] sorry [10:05] <[Trident]sammy> I have an executable file of c with suid permission but i don't have its c file .how to make and other file point to that executable file?(assingin path to that executable file) [10:05] stil erorr http://paste.ubuntu.com/1080932/ [10:06] Thanks ActionParsnip I am not in the vicinity of the projector at this time [10:06] Hello, I have ten of gEdit theme, where should I place them so I can use them? [10:06] hello [10:08] any solution [10:09] bakshi: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/940762 [10:09] Launchpad bug 882147 in linux (Ubuntu Precise) "duplicate for #940762 overlayfs does not implement inotify interfaces correctly" [High,Triaged] [10:09] amaroks, this should help http://www.noobslab.com/2012/05/install-ubuntu-tweak-on-ubuntu.html [10:09] i chek this [10:10] cirustus: I want actually to install gedit, text editor themes [10:11] I need to use this command "echo 0|sudo tee /proc/sys/kernel/yama/ptrace_scope" to disable the Ubuntu 12.04's feature which blocks access of one application from another. But it gets enabled back after restarting. Any way to do it permanently? [10:11] desn't solved [10:11] amaroks, im not sure on that one [10:13] bakshi: check dig ;) [10:13] tenx my problem solve [10:13] oot@blitz-RV409-RV509:/home/lion# dpkg-reconfigure resolvconf/usr/sbin/dpkg-reconfigure: resolvconf is broken or not fully installed [10:13] i can ping hostname too..but now new problem [10:13] bakshi: ah really? how? what was the prob? [10:14] bakshi: try: sudo apt-get --reinstall install resolvconf [10:14] how to solve this [10:14] bakshi: interesting, thx [10:14] bakshi: never ran into that before [10:14] i look and did [10:14] but new problem [10:14] nice [10:15] bhavesh: you can add it to /etc/rc.local above the 'exit 0' line [10:15] Whp using QQ? [10:15] bakshi: wouldnt it be boring otherwise? [10:15] who using QQ? [10:15] Get:1 http://us.archive.ubuntu.com/ubuntu/ precise-updates/main resolvconf all 1.63ubuntu14 [53.3 kB] Fetched 53.3 kB in 1s (27.2 kB/s) Setting up resolvconf (1.63ubuntu3) ... start: Job failed to start invoke-rc.d: initscript resolvconf, action "start" failed. dpkg: error processing resolvconf (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered whil [10:15] ok [10:16] can anyone tell me how these methods work? https://one.ubuntu.com/developer/files/store_files/ubuntu [10:16] How can i use them in my python code. [10:16] Hi [10:16] panz: Quantal/12.10 is a development release (still Alpha). Please /join #ubuntu+1 for further support and discussion [10:16] it can not reinstall resolvconf [10:17] lol.... QQ Communicator... hahaha not Quantal xD [10:17] bakshi: if you can't fix simple issues, you shouldn't be using quantal, it's no where near finished [10:17] [10:17] Litecoin Part evg2sYLoDHjMQP Bitcoin Part LCren3rpG6YyXY (1) [10:17] oh my bad, sorry [10:17] it simple issue then why u right rounding me?why u not giving me solution?u giving me so many command too [10:17] panz: in that case, ask your real question (in the channel) including the details [10:18] bakshi: please mind you that everyone here is a volunteer. Answers are not always available. Have some patience [10:18] bakshi: i suggest you run: ubuntu-bug resolvconf and report the bug [10:19] oh damns i dont know whats wrong [10:20] Hi guys, when I enable/disable networking on my ubuntu (12.04), my laptop freezes for about 50 seconds. Is this behaviour normal or is something wrong? [10:26] bonjour tous le mond [10:26] !fr | jcld [10:26] jcld: Ce canal est en anglais uniquement. Si vous avez besoin d'aide ou voulez discuter en français, veuillez taper /join #ubuntu-fr ou /join #ubuntu-qc. Merci. [10:26] minas: how are you disabling it? [10:26] jcld: bonjour madame [10:26] désolé je suis monsieur [10:27] ActionParsnip: I click on the networking icon and then "enable networking" [10:27] hello there! [10:27] jcld: c'est pas drole [10:27] tenX, english here [10:27] minas: you could run: dmesg | tail -n 20 to see what happens, it may give clues [10:28] bazhang: sry simply trying to show off my foreign lang skills :( [10:29] ActionParsnip: Here it is http://pastebin.com/MTxuTZ1r [10:29] i'm trying to set up a "netboot" server to deploy ubuntu 12.04 installation in my lan... i installed a ubuntu server 12.04, installed dhcp3-server and tftpd-hpa (according to https://help.ubuntu.com/12.04/installation-guide/i386/install-tftp.html) and put in /var/lib/tftpboot the http://archive.ubuntu.com/ubuntu/dists/precise/main/installer-i386/current/images/netboot/netboot.tar.gz (and then [10:29] extract the files) [10:29] bazhang: also i was only responding. but somehow i've always been the one to be hung [10:30] the dhcp server is working, but my client, after the information about ip, subnet etc, show me a message: TFTP. PXE-T01: File not found [10:30] in the dhcpd.conf i tried to pass pxelinux.0 from the symbolic link and also the file in ubuntu-installer/i386... [10:30] what am i doing wrong? :) [10:31] libellulelly: don'y you have a dhcp server in your network already? [10:31] no [10:31] libellulelly: like a router? [10:31] the only active is that one i configured [10:31] and it works [10:31] libellulelly: gotcha [10:32] libellulelly: pxe? [10:32] tenX: network boot [10:32] the issue is about the location of the file i think [10:33] or permissions on the file perhaps. [10:33] ActionParsnip: yeah that was my thought. too long ago from my side [10:34] !unity [10:34] Unity is the default UI since Ubuntu 11.04. Unity is a shell for GNOME. see http://unity.ubuntu.com. For a GNOME 2-like experience, see !notunity [10:34] this is the dhcpd.conf [10:34] http://paste.ubuntu.com/1080957/ [10:34] !notunity [10:34] owner root and that's ok [10:34] Ubuntu 11.10 and higher use GNOME 3 with the !unity shell by default. To use GNOME Shell instead, install the "gnome-shell" package and investigate "gnome-tweak-tool". For GNOME Fallback mode, which is similar to GNOME 2, install "gnome-panel". Both packages will place entries in the Sessions dropdown. Using Natty? See !classic [10:35] hello [10:35] I am hoping someone can help me. I am running 12.04 64bit Server. Anytime the server is rebooted, I have to run "echo "nameserver 8.8.8.8" | sudo tee /etc/resolv.conf > /dev/null" to get anything to work in apt-get. (install, update, or upgrade) does anyone have any idea what would cause this? [10:35] a question [10:35] libellulelly: well just guessing but could it be a path issue? [10:35] is it possible to deactivate the network function [10:35] cntb: you can /msg ubottu !unity to use the bot in private [10:35] by faulty entering sleep mode? [10:35] i placed the netboot.tar.gz in /var/lib/tftpboot and then untar it in that place [10:35] I mean [10:35] first of all [10:35] libellulelly: the err indicates it, wrong server/path/imagename? [10:35] entering sleep does not work [10:36] then rebooting [10:36] Han_: please keep your questions/responses in single line [10:36] Case_: how do you assign IP's? dynamic ? static? [10:36] Han_: sleep and hibernate can 'break' some hardware drivers. so yes [10:36] Static [10:36] pxelinux.0 in /var/lib/tftpboot is a symbolic link that points to /ubuntu-installer/i386/pxelinux.0 [10:36] i tried to substitute it [10:36] but [10:36] no results [10:36] dr_willis thank you do you know how to repair the driver? [10:37] libellulelly: please try to keep your posts in single line, not using enter after every few words [10:37] Case_: do you use network manager for static addressing? [10:37] libellulelly: how does it work via pxe? what vars are supplied? dont remember [10:37] ok oCean :) [10:37] Han_: common bug and issue. no idwa. i dont yse sleep [10:37] hi. soo, anyone been posting some hex codes in here? [10:37] libellulelly: but it definitely sounds like a path/server/filename error to me [10:37] Anduck: huh? [10:37] well I broke down a friend's pc by doing this [10:38] i heard someone pasted here a small string containing hex [10:38] and i need it [10:38] tenX: its all ok, pxe is triggered by the client, and tftpclient try to pass via tftp protocol the image to my client. But the pxelinux.0 is not found... for a reason i don't know and can't see [10:38] Anduck: how is that Ubuntu related? [10:38] Nothing special, just normal conf [10:38] libellulelly: the client is trying to receive an image it cant download [10:38] oCean: i don [10:38] !log | Anduck [10:38] how can I create a sprunge alias in my bashrc ? any suggestions ? [10:38] Anduck: Official channel logs can be found at http://irclogs.ubuntu.com/ . LoCo channels are now logged there too; for older LoCo channel logs, see http://logs.ubuntu-eu.org/freenode/ [10:38] oCean: i don't know. [10:38] we tried upgrade [10:38] thanks :) [10:38] Anyone able to help with Dovecot? [10:38] Anduck: this channel is for technical ubuntu support only [10:38] libellulelly: have you checked it manually? [10:38] !dovecot | Anduck [10:38] Anduck: IMAP and POP are protocols for fetching email. The officially-supported server in Ubuntu is Dovecot (packages "dovecot-imapd" for IMAP, and "dovecot-pop3d" for POP) - See also !MailServer for information on the SMTP protocol [10:39] libellulelly: dl from tftp? [10:39] Anders-: just ask your question (detailed) in the channel. Although #ubuntu-server might be better suited for your query [10:39] is an upgrade the only way and keeping files? [10:39] Case_: do you use NetworkManager? if it's blank as in completely blank I have seen that when you do static via interfaces and don't set any resolver, if it's being overwritten by something and ending up blank - you should probably set the name servers in the utility your using to config network [10:39] libellulelly: within your config setup [10:39] tenX: good question, it's worth trying [10:39] in short it seems you don't have a nameserver configured statically [10:39] oCean: Thanks. I will give them a try, if not... I might be back. [10:39] and/or you are running something overwriting it (network manager) [10:40] libellulelly: dont remember how that setup is to be configured [10:40] I have a new intel rig and I have tried live cd 12.04 & 10.04 and also 12.04 on usb flash stick, all three show initial purple screen and then black screen flashing cursor. Can someone help debug this with me [10:40] Case_: generally there will be a comment line (denoted by beginning with a #) saying which program or library wrote to the file last [10:40] libellulelly: do you specify the path/filename of the image server side? [10:40] Han_: its possible a kernel update will eventually fix the issue. check bug reports to see if its been reported [10:40] libellulelly: must be [10:40] oCean: what is the ubuntu discussion channel? [10:41] libellulelly: anything else wouldnt make no sense [10:41] tenX: i followed these instrutions https://help.ubuntu.com/12.04/installation-guide/i386/install-tftp.html to install dhcp server + tftp server and this https://help.ubuntu.com/community/Installation/WindowsServerNetboot to know where to take the image [10:41] Anduck: there is #ubuntu-discuss (for ubuntu specific topics) and #ubuntu-offtopic for social chat [10:41] libellulelly: too drunk to read :D [10:41] ok, thanks [10:41] tenX: yes i have to pass pxelinux.0 [10:41] okay [10:41] libellulelly: you should check the syntax for that deployment [10:42] libellulelly: definitely sounds like the client is trying to pxe [10:42] Well, I'm back. [10:42] libellulelly: but cant find the image [10:42] is there a way to see terminal trace or log of initial livecd boot that hangs ? [10:43] tenX: i try to tftp from windows pxelinux.0 and it does work :O [10:43] hipitihop: remove the boot options: quiet splash [10:43] I'm getting an internal login failure. From the log file :: Internal login failure (auth failed, 1 attempts): user=, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured [10:43] libellulelly: if it works on windoze something must be wrong ;) [10:44] ActionParsnip, how do I do that on a live cd ? [10:44] !bootoption | hipitihop [10:44] hipitihop: For a list and explanation on some of the boot options, see https://help.ubuntu.com/community/BootOptions See also !nomodeset. [10:45] libellulelly: what is the pxe config option for the image? [10:45] libellulelly: and is it seperate from the server ip? [10:46] tenX: it's all in dhcpd.conf [10:51] please help! My sony vaio running 12.04 has been giving me problems. When I attempt to restart or shut down it just goes to the black screen with the linux commands to shut down and stays idle in a black screen but does not power down and will not turn back on unless I do a shut down by holding my power button. Please help I just upgraded to 12.04 from 11 and still same problem. [10:53] andrewb80: if you run: sudo shutdown -h now does it turn off ok? [10:53] andrewb80: thats a somewhat common issue. you checked the forums and askubuntu.com for your exact model laptop? [10:53] where can i find this channel log from past hour? [10:53] ActionParsnip: I have not tried the shut down from the shell. but will. [10:54] !1984 | Anduck [10:54] Anduck: Official channel logs can be found at http://irclogs.ubuntu.com/ . LoCo channels are now logged there too; for older LoCo channel logs, see http://logs.ubuntu-eu.org/freenode/ [10:54] thx [10:54] dident we tell him that like 10 min ago? [10:54] ;) [10:55] i think [10:55] that log is delayed [10:55] is there not-delayed one? [10:55] Hi everyone I am Sonik [10:55] Anduck: not supriseong it has lag. [10:56] dr_willis: I did find a problem with my ram cover the contacts were not macking contact on the frame and that did fix and issue with my screen shutting down and not turning back on. also it would get stuck on the Vaio screen before loading ubuntu. since I fixed the contacts it seems to do that less. but sometimes gets stuck. and I know this sounds stupid but bending the screen a tiny bit close to the top gets it to load [10:56] dr_willis: yeah but i am looking for nondelayed one. the one i got linked at got 2 hours delay which is too much for this case [10:56] I don't want to be rude, but was anyone able to help with my Dovecot problem? [10:57] andrewb80: flakey hardware and soldered Connections it seems [10:57] #ubuntu-server wasn't any help. [10:57] Anduck, thats enough. there is no non-delayed one. it's not a n ubuntu issue [10:57] hello everyone [10:57] bazhang: ok, thanks still :) [10:58] * dr_willis has no idea what dovecot is.. [10:58] Anders-, try #dovecot [10:59] does anyone know if it is possible to use Windows drivers for a keyboard with integrated touchpad? Something like Ndiswrapper only not for a network card. [10:59] Thank you, bazhang. [10:59] why [10:59] picasa is not in the ubuntu repo [10:59] joeress: what's not working with it? [10:59] newbie|3, the one made by google? [11:00] yup [11:00] newbie|3: google has their own repos for some things [11:00] dr_willis: 2 finger scroll [11:00] strangely 2 finger click works [11:00] dr_willis: I thought it sounded like a hardware issue. Since all this stuff happened I have three lines down my screen, I thought it was from my bending the monitor. I hook it up through component cable to my bravia 40 in. and the screen is clear. so I do have a screen connection fault or screen fault Im sure. but could that cause a shutdown and start up fault like I have. Like a problem with not receiving a message from the scr [11:00] een or something? sorry if this seems obvious but Im a newb and I just recently made the best decision of my life switching to Ubuntu [11:00] tenX: thank you very much for your help, you solved my problem! :))) [11:00] joeress: so just 1 feature is not working? [11:00] yeah i know perviously ubuntu released i could install repo without adding any address to sources.list [11:00] yeah [11:02] joeress: checked the forums and askubuntu.com yet? useing a windows driver is not likely to work === Guest67311 is now known as Const1 [11:02] dr_willis: i have searched google a fair bit and seen that I am not alone with the problem but that there seems to be no solution [11:04] how to clear terminal history ? [11:04] gitesh: history --help [11:05] -c i think [11:05] ok. Thanks [11:05] checking,,,,, === Lebby1 is now known as Lebby [11:07] hello, i'm trying to recover the data that was on my USB drive; i can mount it, i can see some files, but then other files just disappeared, and instead i can see folder like FOUND.001, with 10,000 FILExxxx.CHK files in them [11:07] yeah. its' right [11:07] when ubuntu is loading and I just see the little thing "blink" in the top left corner and that never goes away, how is it I can see some text of what its accually doing? [11:08] Dynamic IP works sporadically on ubuntu 12.04. http://ubuntuforums.org/showthread.php?t=2015860. can you help? [11:09] nobody around? === Lebby1 is now known as Lebby [11:11] ActionParsnip, thanks that helped, using F6 boot options when I set acpi=off then I can continue with "Try Ubuntu without install" and all works. So do I need something special for installation ? or should I just go ahead and install with acpi=off [11:13] babalu: lost files go there when recovered. thecn the files out. [11:13] * gitesh learning Bash scripting [11:13] babalu: file command may help figure out what ones are what [11:13] dr_willis: "thecn"? [11:14] you got a lot of files to sort through ;) [11:14] check the contents of them with 'file' command. if you are looking for a specific type [11:15] dr_willis: but i didn't recover anything yet, they just appeared, they're all 16384 bytes; and i get FILE1453.CHK: data when trying "file" [11:15] any ethernet experts? [11:15] gRAVIty_: Just ask, dont ask to ask. [11:15] babalu: thats not a good sign. could be they were unrecoverable [11:15] bekks: Dynamic IP works sporadically on ubuntu 12.04. http://ubuntuforums.org/showthread.php?t=2015860. can you help? [11:16] bekks: I asked previously. waiting for some one to look at it [11:16] Hey, does anyone happen to have a channel log and wouldn't mind grepping the last few lines for MysteryBanshee? [11:16] dr_willis: i didn't try any recovery tool yet [11:16] babalu: the filesystem checker checked, and moved them allready [11:17] bekks: are you looking into it? [11:17] dr_willis: and this key was only ran on windows by a friend (not mine) === newbie|3 is now known as hellyeah [11:17] -key +drive [11:17] gRAVIty_: Did you try to manually receive an IP from your DHCP server? [11:17] babalu: and those names are typical of windows file system checker's recovery names. [11:17] bekks:how do I manually try? [11:18] tenX: thanks again for your help... goodbye to all!!! [11:18] dr_willis: so if these files are "part" of files, i cannot recover them? [11:18] babalu: windows say the stick having issues and tried to recover the data [11:18] gRAVIty_: dhclient eth0 [11:18] bekks: thats it? [11:18] libellulelly: glad to help ya out [11:18] babalu: #windows may have advice === Lebby1 is now known as Lebby [11:19] dr_willis: thanks i'll check that [11:19] bekks: If there is anything else I can try I will also try that and get back to you now :) [11:19] gRAVIty_: Thats the first thing to try. If that fails, even periodically, your DHCP server is faulty. [11:20] bekks:If you want me to try that first I can do that. but if you can also give the follow up instructions incase it fails I will check that too [11:23] bekks: should I try that and get back? [11:23] Hi. Noob question.... I've just added a PPA which allowed me to install Gimp 2.8. Do I need to remove this PPA in case I accidentall add something that's incompatible with Ubuntu 12.04? And how do you view the current PPA list? [11:23] (accidentally) [11:23] anyone know when pidgin in precise will be updated? there are several security issues been fixed since the precise released package [11:24] cvr take a look in launchpad [11:24] bekks: I am trying it now. cya [11:25] MonkeyDust: nothing noted for precise only quantal [11:26] cvr you could report a bug [11:27] MonkeyDust: ok np, thx [11:29] !ppa [11:29] A Personal Package Archive (PPA) can provide alternate software not normally available in the offical Ubuntu repositories - Looking for a PPA? See https://launchpad.net/ubuntu/+ppas - WARNING: PPAs are unsupported third-party packages, and you use them at your own risk. See also !addppa and !ppa-purge [11:30] !ppa-purge [11:30] To disable a PPA from your sources and revert your packages back to default Ubuntu packages, install ppa-purge and use the command: « sudo ppa-purge ppa:/ » – For more information, see http://www.webupd8.org/2009/12/remove-ppa-repositories-via-command.html [11:30] pls someone tell me why my .mov file is not playing audio with totem? and with VLC its audio only [11:30] Macready: To list all repositories including PPAs, cat /etc/apt/sources.list [11:30] if its a gimp only ppa. i doubi it will affect much else [11:31] * nyuszika7h thinks that too [11:31] ppas are not in sources.llist.. but are in sources.list.d/ [11:31] Oh, they are in sources.list.d? Sorry, I'm not an (active) Ubuntu user [11:31] normally you dont mess with sources.list much these days. [11:32] comment/uncomment a few lines is about it. [11:32] OK, thanks guys. I guess I'll just leave the added PPA as it is. [11:33] I use Debian, which doesn't have add-apt-repository, so I usually append repos to the end of sources.list [11:33] It's probably different in Ubuntu though [11:33] MetaBot... that wasn't a question [11:33] bbl [11:33] I'm looking for some suggestions to figure out what's going on with my VirtualBox ubuntu VM. It's periodically "hanging." The UI will freeze for about 20-30 seconds and then start working again. It does this very frequently. Anyone ever seen this? How do I figure out what's wrong? [11:34] jwcarman: that sort of thing is normally lack of resources/bottleneck [11:34] anyone know why my .mov file is not playing audio? the video shows but no sound [11:34] jwcarman: Did you install the guest additions? [11:34] tking: missing codecs [11:34] ikonia: so, what should I look for? [11:34] I have the guest additions installed [11:34] I have dkms installed [11:34] jwcarman: Which vbox version? [11:34] jwcarman: look at your resources, [11:34] ikonia, how do i get the codecs? [11:35] tking: look what codecs the video/audio was encoded with, then search what package contains thouse codecs and install [11:35] bekks: it should be the latest. I re-imaged my entire machine on Friday night and set this thing up since then [11:36] Yeah, check for updates tells me I'm running the latest version [11:36] ikonia: how do you look at your resources? [11:36] jwcarman: "should be" isnt sufficient. Which version is ot? [11:36] jwcarman: use resource monitors on both the host and the guest and look for any corrolations [11:37] ikonia: okay, sounds easy, but what if the resource monitor UI hangs up, too? [11:37] jwcarman: it shouldn't on the host - if it does on the host, you know your host is having a proble, not hte guest [11:38] Hello. [11:38] bekks: 4.1.18r78361 [11:38] ikonia i check properties by right clicking and i saw Type: QuickTime video (video/quicktime) is that the codec? [11:38] !quicktime | tking [11:38] tking: For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also https://help.ubuntu.com/10.04/musicvideophotos/C/video.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats [11:39] jwcarman: How much RAM does you host have, which CPU exactly, and whats the output of VBoxManage showvminfo YourVMName? Put that output in a pastebin please. [11:39] i can't install software from the software center - there is some policykit error thrown in the console [11:39] ikonia: I think the host is good. I don't notice any freeze-ups there, which is weird because it's windoze. Although, the whole reason I switched back to Windoze host from Ubuntu was because my machine became unstable and wouldn't launch Unity for some reason (booted straight to text login) [11:39] jwcarman: the operating system is called "windows" not "windoze" [11:39] jwcarman: "rhe host is good" does not tell anything about lacking resources. [11:40] bekks: 16GB, Sandy bridge 2600k, figuring out how to run VBoxManage [11:40] ikonia: yes, I know [11:41] jwcarman: By opening a cmd window, changing to the directory vbox is installed in, and typing that command. [11:41] ikona: I call it that to be funny [11:41] jwcarman: And "sandy bridge 2600k" is not a known processor specification. [11:41] jwcarman: it's not funny it's rude and childish and makes me not want to help you any more [11:41] ikonia: boy you guys sure must have a lot of friends [11:41] Windows always kicks [11:42] jwcarman: We do. Please answer my questions. [11:42] !behelpful | jwcarman [11:42] jwcarman: As our !guidelines say, "When helping, be helpful". If you're not familiar with the issue at hand, let someone else handle it instead of making !offtopic comments or jokes. [11:42] bekks: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz [11:43] I upgraded to Ubuntu Linux about a week ago. And It was going well. I usually never shut my computer of but when I did I noticed that I had to boot my computer from the flash drive that I had installed Ubuntu on. How can I resolve this issue? I thought I might tell you also that during the setup, the program said it would have to delete two or three partitions (The exact number I can't tell... [11:43] ...as I can't remember). Also, if it's relevant, I upgraded from Windows 7 to Ubuntu Linux 12.0.4. Can anyone help me resolve this issue? [11:43] you know what's funny and childish? that always believe in that linux can replace windows is.. [11:44] !ot | metbsd [11:44] metbsd: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics (though our !guidelines apply there too). Thanks! [11:44] hello [11:45] when i download files from the internet on my ubuntu to a network storage device.. something keeps taking my main ubuntu harddisk space [11:45] do you know where it is ? [11:45] ceradon: There is no upgrade path from Windows to Linux at all. And whats the problem at that point - do I get you right that your computer doesnt boot without your flash drive anymore? [11:45] help2222: i suggest you remove old kernels to free space [11:45] help2222: what are you downloading ? [11:46] bekks: Yes. [11:46] ikonia large single files [11:46] help2222: what sort of content ? [11:46] sometimes from 50 ~ 1GB in size [11:46] metbsd: it can in some cases [11:46] bekks: I used the ISO images on the Ubunto website. [11:46] ceradon: Then you apparently installed ubuntu or the bootloader to the flash drive instead your harddrive. [11:46] also sometimes i view videos online on my browser it also seem to take space even when i disable temp files cache [11:46] ActionParsnip: don't feed him please. [11:46] bekks: http://paste.ubuntu.com/1081044/ [11:46] ikonia: sure === lubmil is now known as lub` [11:47] help2222: where is it taking space? [11:47] ActionParsnip: do you know how to find out where is the extra space is taken from ? [11:47] that's what i want to know [11:47] what's keep filling my harddisk without my permission [11:47] help2222: where is it taking space? [11:47] i use LAN storage [11:47] jwcarman: Whats your windows drive Z:? Some network share you mounted? [11:47] for all my files [11:48] help2222: stop repeating and look at what people are asking you and respond [11:48] bekks: In the setup, I chose the "Install on hard drive" option. Was it an error on the Ubuntu Installers part or mine? [11:48] bekks: it's a striped volume across two disks [11:48] help2222: you can use disk usage analyser to see what is using most, if you are low on space I'd remove old kernels as a start, you can also use bleachbit (carefully) to clear more space [11:48] nothing is stored on my ubuntu harddisk . only programs [11:48] help2222: stop repeating and look at what people are asking you and respond [11:48] bekks: local [11:48] instaled proglrams [11:48] ceradon: You were asked where to install the bootloader at the end of the installation. [11:48] help2222: where is it taking space? [11:48] action i removed older kernel and i use bleachbit [11:48] no difference [11:48] help2222: can you use http://pastie.org to give the output of: lsb_release -a; uname -a; echo; dpkg -l | grep linux-image [11:49] it's not his kernel taking up space [11:49] the issue is he's downloading to external storage and it's taking up space on local storage [11:49] help2222: also add: df -h; sudo fdisk -l; mount [11:49] cleaning the kernel won't change that [11:49] ikonia: added some other good stuff :) [11:49] it's pointless cleaning up, until you know what's taking his space and where [11:50] ikonia: fine, but the extra commands will help [11:50] ikonia yeah i know. on windows there are specific places where you store files [11:50] on unbuntu i don't know any [11:50] I'm out, carry on into pointless obvilion [11:50] where you store user files or docuements or temp files or browser files. on windows you know where they are [11:50] tell me where on ubuntu [11:51] help2222: can you run the commands I gave please and give the output. Thanks [11:51] maybe ubuntu keep caching my downloaded files then it transfer part of it slowly thru the LAN? [11:51] ActionParsnip: it only happens when i download [11:51] bekks: do you need any more information about the striped volume? [11:51] no problem with older kernel images. i removed them all [11:51] help2222: No it doesnt. And it is pointless to guess whats happening with you providing the information requested. [11:52] bekks: So, what is the ideal solution in this case? === jacob_ is now known as Guest40653 [11:52] I've got a Lenovo Thinkpad X121e running Lubuntu 12.04 that I'm having some trouble with sound on. According to "aplay -l", card 0 is the HDMI audio output, and the actual analog output (that I actually want to use) is on card 1. Now, unfortunately, according to cat /proc/asound/modules - both card 0 and card 1 are using the snd_hda_intel driver, so the normal advice you get on the web to use /etc/modprobe.d/alsa-base.conf to statically assign [11:52] indices to cards based on their drivers won't work. So, how can I get my analog sound card to be card 0? Or - more generally - is there anyway to renumber the sound cards *after* the drivers have been loaded? (Would be handy when switching to a USB headset for example.) [11:52] jwcarman: I was just wondering why the disk image resides on "Z:" [11:52] bekks i told you. i store all my files thru local area network storage and when i download files on my limited space ubuntu PC something keeps consumption my ubuntu harddisk space even when i store all the files on a LAN harddisk [11:53] jwcarman: Which ubuntu version exactly are you using in your vm? [11:53] Do I have to go through the installation again or install a different Linux bistro entirely? [11:53] bekks: Linux ubuntu-vm 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux [11:53] help2222: Please provide the information requested. Thank you. [11:53] pv2b: what is the output of: wget -O alsa-info.sh http://www.alsa-project.org/alsa-info.sh && chmod +x ./alsa-info.sh && ./alsa-info.sh [11:53] which informations? auto update is disabled [11:53] ceradon: I guess you have to reinstall, with your flash storage plugged in. [11:53] last update was at the beginning of 2011 [11:53] ActionParsnip: just a moment [11:53] no-one said anything about updates [11:53] so no kernel updates [11:53] no older kernels.. i removed them all [11:53] help2222: stop [11:53] help2222: is the storage mounted? [11:53] help2222: stop talking [11:54] help2222: if you cannot listen to the instructions been given to you - you will get nowhere [11:54] bekks: that's from uname -a. Did you need something different? [11:54] ceradon: WITHOUT your flash storage plugged in of course. [11:54] help2222: run: lsb_releasee -a; uname -a; df -h; mount; sudo fdisk -l use http://pastie.org to host the text [11:54] what instruction? a guy told me to paste the kernels i have on my harddisk but ntohing els. i deleted older kernels and i use bleachbit and nothing change. [11:54] hi there, i'm running 12.04 and when I run xdg-open on a file, it always opens up a file manager with the file highlighted, instead of opening the appropriate application. if i then click it in the file manager, it opens the right application. any ideas? i have two 12.04 systems (one unity, one gnome-shell) that both exhibit this behaviour. [11:55] help2222: no-one told you paste your kernels and that's it [11:55] jwcarman: You may want to search the virtualbox forums on that issue. [11:55] help2222: I asked for the same output earlier. Still waiting... [11:55] I've been googling. Do you see something there? [11:55] jwcarman: forums.virtualbox.org === CowboyTom is now known as thomas [11:56] ActionParsnip: do you want me to automatically upload the alsa information to www.alsa-project.org? is that useful? or should I just pastebin the output in that /tmp file? [11:57] pv2b: upload and a URL will be generated for you [11:57] allrighty. http://www.alsa-project.org/db/?f=5c9de0241231cae85a8cac2e8e720540564869c7 [11:57] pv2b: thanks [11:57] bekks: If that's the case then a Netboot is what I'd have to do, right? [11:58] waaaait --- you can supply *multiple* parameters to the index option? [11:58] pv2b: if you run: alsamixer and press F^, can you select the other sound device? [11:58] bekks: are you sending me there because you know of a known issue that's there? [11:58] ceradon: So the flash drive is you installation source? [11:58] bekks: Yes. [11:58] ActionParsnip: i guess you mean F6? if so, yes [11:59] pv2b: and in teh GUI app for sound, is the correct output device set? [11:59] jwcarman: No. I am sending you there because those guys there develop vbox and they know how to solve vbox related problems :) [11:59] Hiyas all [11:59] ActionParsnip: what GUI app for sound? [11:59] bekks: Ok, fair enough. [11:59] pv2b: in dash [11:59] ceradon: Then you cant remove it, but you have to take care where to install the booit loader at the end of the installation process. === Tux is now known as StormTrooper [12:00] ActionParsnip: dash? this is a lubuntu system by the way so it runs lxde [12:00] bekks: you think it could have something to do with the VM being on a striped volume? [12:01] bekks: One more thing, How do I login as root on a 12.0.4 Ubuntu system? [12:01] jwcarman: I suspect it's the windows volume management software thats causing I/O problems. [12:02] . [12:02] ceradon: There is no root login on Ubuntu. You always log in as a user and then use sudo. [12:02] bekks: I can switch it to a "normal" disk quite easily. I'm not married to the striped volume. [12:02] jwcarman: You could try that. [12:02] bekks: perhaps I'll just try that. I have run ubuntu in a VM for quite some time on many machines without this type of issue. [12:03] How do I install jre7? The instructions on javas homepage seems wrong. They're telling me to chmod a .bin file but the file I download is a .tar.gz file. [12:03] oh, i removed my ~/.local/share/applications/mimeapps.list and it seems to be fixed. weird. [12:03] engammalsko1: just unzip it [12:03] pv2b: ahh, then the sound manager in the menus. I forget it's name [12:03] There's no .bin file there just a bin folder. [12:03] ActionParsnip: I was able to figure it out - what I learnt from reading the output of the file you sent me - that since the index parameters takes t [12:03] engammalsko1: you're done, then! :) [12:04] takes multiple options, i was able to add this: [12:04] pv2b: nice :). That script is badass [12:04] engammalsko1 did you read this https://help.ubuntu.com/community/Java#Oracle_Java_7 [12:04] options snd-hda-intel index=1,0 [12:04] engammalsko1: there is a ppa too [12:04] to /etc/modprobe.d/alsa-base.conf [12:04] pv2b: ahhhhh [12:04] index=1,-2 might be better though, i dunno. [12:05] pv2b: worth a try, its easily changed [12:05] but that still leaves me with the general query - is there any way to change card 0 at run-time? i'd rather not have to vi /etc/modprobe.d/alsa-base.conf and reboot every time i want to switch to my USB headphones :P or the same people I mocked back in windows 95 for having to reboot to change their IP address will get the better of me. [12:06] pv2b: I believe if you use: alsa --reload it will rerad the file [12:06] really? even though it's a modprobe line? hmm. i'll try it. [12:07] how to remove Simple Backup Suite ? [12:07] open the package manager, find it and remove it [12:08] from ubuntu and also to delete the files on var/backups ? [12:08] nope, that doesn't do it. I just tried commenting out my line in alsa-base.conf and do an alsa reload (not alsa --reload) and the sound card indices remain the same. they remain the same even if i try explicitly saying index=0,1 [12:09] lol...help! my ubuntu livecd is asking for a login and password...now I gather the login name is ubuntu, but what is the password? [12:09] samster34: ubuntu I believe is the password as well [12:09] nope [12:09] that's not it [12:10] ActionParsnip: oh wait. actually reading the output of alsa reload says "failed: modules still loaded - and a bunch of modules [12:10] samster34: press CTRL+ALT+F1 and run: passwd ubuntu then press CTRL+ALT+F7 and log in as ubuntu with the password you set [12:10] ActionParsnip: is there anything like lsof so i can tell what process in userland is actually holding the modules loaded so I can reload them? [12:10] ActionParsnip: ok, will try. thanks [12:10] pv2b: you could unload then reload the sound module :) [12:11] pv2b: you may need to kill pulseaudio, you can make a little script [12:11] again, that fails - i guess because the devices are open still === root is now known as Guest94367 [12:11] this system doesn't run pulseaudio, i think lubuntu doesn't ship with that enabled or something [12:11] ActionParsnip: How do I get the ppa if I'm running linuxmint? [12:11] pv2b: i think you are right [12:12] engammalsko1: ask the guys in linux mint support resources [12:12] engammalsko1: mint isn't supported hete [12:12] *here [12:12] engammalsko1 wrong channel [12:12] or more specifically, ps axuw|grep pulse turns up nothing [12:12] !mint | engammalsko1 [12:12] engammalsko1: Linux Mint is not a supported derivative of Ubuntu. Please seek support in #linuxmint-help on irc.spotchat.org [12:12] engammalsko1, get mintsupport then, its not supported here [12:12] why doesn't the software center display any screenshots? [12:12] i don't think i ever saw a single screenshot in this program since it was released [12:12] what gives? [12:12] moljac024: are you fully updated? [12:13] EVERY application says "no screenshot available" [12:13] ActionParsnip: yes [12:13] pv2b, asla force reload doesn't always work , but a reboot does after making changes to alsa config [12:13] BluesKaj: we're trying to avoid reboot [12:14] pv2b: does unloading then reloading the sound module work ok? [12:14] you mean manually using rmmod and stuff? [12:14] ActionParsnip, unfortunate side effect of editing asla base conf [12:14] how do I serach ubuntu for .so packages? [12:14] what happens if i uninstall software center ? [12:14] you won't have software center [12:15] i install all my programs thru terminal [12:15] Saiki: sudo updatedb; locate *.so [12:15] ok [12:15] Saiki: .so aren't packages, they're libraries. but you can use http://packages.ubuntu.com/ to find files contained in packages [12:15] BluesKaj: won't removing the reloading the module mean the config is re-read? [12:15] BluesKaj: okay, let's take a step back. i want to be able to change what sound card is card0 in alsa - to achieve the goal of changing the default sound card for applications without having to reboot the machine. my mac does this. win7 does this. i would expect it to be possible somehow in linux as well. or is there another approach I could use to acheive the same result? [12:16] is there a package that needs to be installed for software center to be able to display screenshots? a package that's not a dependency maybe? [12:17] maybe some part of gnome? i'm not using gnome at all [12:17] pv2b: try the module remove/reload [12:17] moljac024: I don't think every package has a screen shot [12:17] ikonia: i know, but i can't see screenshots even for those that have them [12:17] pv2b, perhaps a logout-login ? frankly I've never tried thattho [12:18] logout-login is practically just as bad as having to reboot the machine :( [12:18] pv2b: sudo modprobe -r snd_hda_intel; sudo modprobe snd_hda_intel [12:19] LjL: I was refering to the packages containing them [12:21] actionparsnip: that does seem to work. but i rebooted since i tried the alsa reload. [12:21] and now alsa reload is working [12:21] i must have had an application up that was holding the sound card open === Freeaqingme is now known as Guest47143 [12:22] bekks, Just curious: What if I were to delete all the files on the jump drive then re-install the ISO image onto it then boot the computer. Would that restart the installation? [12:22] ceradon: No. [12:22] ceradon: You already have a bootable flash drive. Just boot it. [12:22] ActionParsnip, isn't the module snd-hda-intel ? or underscores acceptable as well ? === Guest47143 is now known as Freeaqingme [12:23] bekks: But then how would I get it to reinstall onto my hard drive? [12:23] heloo [12:23] ceradon: By starting the installation again. [12:24] pv2b, try sudo modprobe snd-hda-intel [12:24] ceradon: You did it once, you have to do it again. [12:24] BluesKaj: it works either with underscores of hyphens [12:24] Can i somehow find out what program is asking for access to my keyring? [12:25] pv2b, ok thanks , wasn't aware of that :) [12:25] even snd-hda_intel seems to work :P [12:25] heh [12:25] if you are so inclined [12:25] ubuntu [12:26] BluesKaj: I just ran lsmod, it's what came up [12:26] whelp...I'm still having major problems getting ubuntu to work with my GTX 670. Even with the 302.something drivers, al I get is a bright red screen [12:26] pv2b: now you can make a script and shove it on the desktop :) [12:26] samster34: tried: sudo nvidia-xconfig then rebooting [12:27] ActionParsnip: I did, no effect [12:27] ActionParsnip, ok .good to learn something _new_to_me, everyday :) [12:27] ActionParsnip: I have the generated xorg.conf somewhere, hold on [12:27] samster34: if you press CTRL+ALT+F1 can you log in at CLI? [12:27] ActionParsnip: no! [12:27] red screen === ubuntu is now known as Guest84504 [12:28] samster34: reboot to recovery root mode and you should be able to read /var/log/Xorg.0.log using less [12:28] I can't boot it in recovery mode -> failsafe mode either [12:28] samster34: do you use dual video chips (intel + nvidia) [12:28] ActionParsnip: the error is: screens found, but none have a usable configuration [12:28] ActionParsnip: No, I removed the 2nd nvidia card to avoid trouble [12:28] ActionParsnip: I have no idea how, but right now, with ym current configuration (i also commented out the stuff that prevented the usb sound card from grabbing index 0), every time i do an alsa reload, the default soudn card changes between the usb sound card and the buitl int soudn card [12:30] ActionParsnip: from the look of the xorg.conf, it wasn't able to detect any supported modes for any of my screens [12:30] I tried manually adding 2560x1440 to the resolutions, but that didn't help [12:30] samster34: do you have resolution and refresh rates defined in xorg.conf? [12:30] ActionParsnip: no! [12:30] nothing [12:30] nada [12:30] all it says is that I have a screen [12:30] samster34: want to try my xorg.conf? [12:30] ActionParsnip: well i'm not exactly satisfied with this solution - ideally there could just be a "virtual card0" that would just pass the audio though to your desired sound card. but... i have lunch now. so it'll have to wait. [12:31] ActionParsnip: sure, but..will that work with my screen? [12:31] samster34: http://paste.ubuntu.com/1081089/ should be ok [12:31] pv2b, try this command ,dunno i it still works , if you use gstreamer backend , sudo gstreamer-properties , it should show a USB optional setting [12:31] BluesKaj: i don't think i use gstreamer. but i'll investigate what it is when i've had my food :) thanks [12:32] ActionParsnip: thanks, I'll edit that mode to something I know my screen supports [12:32] samster34: backup the file you have now, then make changes :) [12:32] ActionParsnip: I have no file now, and I can always call nvidia-xconfig again to get the nearly empty one :/ [12:33] brb, have to reboot [12:41] hey, anyone know the command to update the pci device IDs? my GTX 670 is not being recognized as such when I do lspci [12:42] samster34, have you chosen the pci graphics as your default in the bios? [12:42] BluesKaj, yes, that's not the issue, there is no other graphics either [12:42] or is thhat an onboard [12:42] samster34: There is no command to do so. If it isnt listed, the hardware isnt recognizred by your computer. [12:43] bekks, yes there is, someone told me what it was yesterday :p [12:43] I just don#t remember :/ [12:43] samster34: do you use an Intel i7 cpu? [12:43] ActionParsnip, yes, but my mainboard doesn't use the integrated GPU [12:43] samster34: ok, you can see why I ask :) [12:44] my graphics card is listed as "NVIDIA Corporation Device 1189 (rev a1)" [12:45] hi, i am looking for an up-to-date guide to get accelerated flash working on an intel gma 4500 on ubuntu 12.04. any help would be nice :/ [12:45] ah, found it. 'update-pciids' [12:45] samster34, . sudo lshw -C video [12:46] BluesKaj, ok? [12:47] samster34, look beside product in the list [12:47] BluesKaj, GK104 [GeForce GTX 670], as expected === tazjin|away is now known as tazjin [12:48] samster34: what is the output of: lsb_release -sc [12:48] then your card is recognized , you probly need a better driver [12:48] samster34,^ [12:48] ActionParsnip, : precise [12:48] BluesKaj: need a better driver too [12:48] samster34: could try the xorg edgers update ppa (less fresh more stable) [12:49] ActionParsnip, already am, I have driver 302.something [12:49] that is, on the installed system which I can't get into because red screen of death. I'm on a live system right now [12:49] samster34, what's the recommended driver for your card in additional drivers ? [12:50] where? [12:50] oh [12:51] the nvidia site directs me to the 295.59 drivers, but I had no luck with them either === tazjin is now known as tazjin|away [12:52] anyway, I've added a display mode that the screen supports, I'll try booting the install again. [12:52] be back in a bit.. === tazjin|away is now known as tazjin [12:59] nautilus keeps crashing when I open my downloads folder. it gives this message: "nautilus: jp2_dec.c:299: jp2_decode: Assertion `dec->image->cmprof_' failed." === tazjin is now known as tazjin|away [13:01] Hi. Did someone ever use gddccontrol to configure brightness and contrast on a laptop ? [13:02] Doxin: does it happen as a fresh ubuntu user? [13:05] how do i write 3 sentences into terminal in one time? [13:05] "prompt$ pwd [13:05] /where/i/saved/it [13:05] prompt$ ./hello_world.sh" [13:05] gitesh: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation. [13:06] well, the splashscreen was looking fancy, and running at proper resolution, but then it flashed and went to a bright red screen again... [13:06] Is there any way to 100% completely avoid the unity login screen ? When I click shut down, I get into the log in screen.. I want to close my computer :( [13:06] <[flux]> gitesh: Use a shell script. === Lebby1 is now known as Lebby [13:08] Did someone ever use gddccontrol to configure brightness and contrast on a laptop ? Actually it seems to work only with monitors and not laptops.. [13:08] ActionParsnip: I'm going to try a clean install, do the update-pciids first, then install the nvidia driver, and maybe then nvidia-xconfig will be able to properly configure the screens? [13:09] [flux]: nice:) i got it. Thanks [13:11] samster34: possibly [13:11] gitesh: you can separate commands with a semicolon (;) [13:13] Hello everyone! I need assistance in opening a run dialog box on xclient script session [13:13] !quicktime [13:13] For multimedia issues, this page has useful information: https://help.ubuntu.com/community/RestrictedFormats - See also https://help.ubuntu.com/10.04/musicvideophotos/C/video.html - But please use free formats if you can: https://help.ubuntu.com/community/FreeFormats [13:14] Kagee: ok [13:17] Hiwa! [13:17] hi [13:17] Will DNS Changer trojan affect Linux systems? [13:18] Gosset_Inofensiu: no [13:18] y not? [13:18] Gosset_Inofensiu: not unless you're using a windows system as a dns proxy via ICS or similar....in general, no [13:18] ssta: oh ok [13:19] i could not do this :/ [13:19] Hi folks. Is there an ubuntu channel that would be suitable for a crystalbuntu question? [13:19] hmm [13:19] thanks llutz [13:20] hi guys, i have installed medibuntu, w32codecs, libdvdcss2 and vlc still can not play .mov videos pls any help or idea? [13:21] :) it was so easy. Thanks. [13:22] any link that probe that ssta and llutz ? [13:22] all the media outlines that linux systems may be affected [13:22] this will cause windows users laughing out loud [13:22] Gosset_Inofensiu: what media say that? [13:23] at least in europe [13:23] FBI [13:23] http://malden.patch.com/articles/computers-infected-by-dns-changer-trojan-malware-will-lose-internet-access-monday [13:23] pc world [13:23] I have a stuck cd in the laptop, I am in lubuntu [13:23] first paragraph [13:23] Gosset_Inofensiu: read the the trojan does, how it does it and how that would be done on linux systems [13:23] is there a clever way to get it out? [13:23] read what* [13:24] Do you know how to open wine or programs installed into it? I don't find it! And what's the path? help theenk yuu :) [13:24] silverarrow: get a paper clip and poke the little hole [13:24] malware in linux? sounds exciting! [13:24] Gosset_Inofensiu: you have a link to the pcworld article? [13:24] or nonsense [13:24] thanks a lot [13:24] MonkeyDust: hardly unique...but rare :) [13:24] 'lo ikonia [13:24] Gosset_Inofensiu: you'll be fine :) [13:24] utu-san: the cd rom is working, but newly installed lubuntu on an old ibook [13:24] MonkeyDust: wouldn't be the first time [13:25] MonkeyDust: and yes, "linux is secure" is a myth [13:25] llutz i know that, it is 'more secure', is what i say [13:25] Do you know how to open wine or programs installed into it? I don't find it! And what's the path? help theenk yuu :) :))))) [13:26] !wine | ari-santihiyu [13:26] ari-santihiyu: WINE is a compatibility layer for running Windows programs on GNU/Linux - More information: https://help.ubuntu.com/community/Wine - Search the !AppDB for application compatibility ratings - Join #winehq for application help - See !virtualizers for running Windows (or another OS) inside Ubuntu === seejy is now known as zz_seejy [13:26] ok theenk yuu [13:27] ActionParsnip, hey, so I did a clean install and the driver works, and it seems only my first screen can't be configured, the other two are now working fine [13:27] thanks guys [13:28] samster34: ahh, did you upgrade from Oneiric before? [13:28] ActionParsnip, no, that was a clean install as well [13:28] the difference might have been, I didn't reboot but restart lightdm instead right after installing the driver [13:29] and I did the update-pciids before any of that [13:29] samster34: weird stuff :) [13:29] ActionParsnip: so, how do I go about making my first screen work? [13:29] aw. [13:30] is anyone good with terminal? like unmount CD and eject? [13:31] I have 3 screens connected, and for 2 of them the correct display modes are automatically detected, but for some reason not for the fist screen. it's a dual link 2560x1440 screen, don't know if that makes a difference or not [13:31] this kind of touble is what there are actions parsnips for [13:32] or maybe redbeets [13:32] ActionParsnip just left :/ [13:33] silverarrow: "sudo umount /path/to/your/mountpoint"; sudo eject /dev/cdrom" [13:33] worked [13:33] thanks [13:34] anyone have an idea how to configure screens manually, when the driver can't extract the information itself? [13:34] it was the unmouting that I cound't figure out how to do [13:36] where are per user's startup application saved? [13:36] !fixres [13:36] The X Window System is the part of your system that's responsible for graphical output. To restart your X, type « sudo /etc/init.d/?dm restart » in a console - To fix screen resolution or other X problems: https://wiki.ubuntu.com/X/Config/Resolution [13:36] is anyone clever with powerpc? ibook [13:37] I have troble booting after install [13:37] silverarrow: Why dont you just ask what you want to know? [13:37] some kind of bug [13:37] excalibr: .local/autorun or. config/autorun i think [13:37] or was it autostart [13:38] yea found it. ty [13:38] I am looking for a way to make the boot up command "Linux b43.blacklist=yes " stick automatically [13:39] when I boot I have to write "Linux b43.blacklist=yes " for it to boot properly, [13:39] samster34, intall nvidia-settings and nvidia-settings-updates . you'll have more options with the settings GUI [13:39] silverarrow: edit the bootloader cinfigs. i dont know what ppc uses to boot. if its grub2 then its /etc/default/grub [13:40] BluesKaj: thanks [13:40] dr_willis: can we manually run those autostart files? [13:40] !blacklist | silverarrow [13:40] silverarrow: To blacklist a module, edit /etc/modprobe.d/my_blacklist.conf and add « blacklist » to the end of that list - To explicitly load modules in a specific order, list them in /etc/initramfs-tools/modules and type « sudo update-initramfs -u » [13:41] excalibr: yes. they can be links. or scripts. or. desktop launchers [13:41] hmm === patrick is now known as Guest4094 [13:42] BluesKaj, how do I apply changes with nvidia-settings? [13:43] samster34: type:sudo nvidia-xconfig [13:43] hi [13:43] aguitel: and then what, reboot?! [13:44] lol [13:44] samster34: yes [13:44] aguitel: can I just restart lightdm again? [13:44] samster34, check for the nvidia gui in apps , my recall of the unity and gnome apps menu isn't very good ..kde here [13:44] samster34: restart system [13:44] BluesKaj: I have the GUI open, it's just...you can only save the config, not apply it now.. [13:45] dr_willis: not sure about grub either, I'm new to ppc and linux combo [13:45] samster34: you generally have to restart the X server to apply config changes [13:45] BluesKaj: ok, well the GUI doesn't show any info about the first screen either, and the acquire EDID button is greyed out.. [13:46] so how do I go about configuring it? [13:46] samster34, have you run sudo nvidia-xconfig ..best that it's run at a TTY , with gdm or lightdm stopped [13:46] BluesKaj: I already did that many times [13:46] on this install ? [13:46] it doesn't detect any modes [13:46] silverarrow: i dumped my only ppc bix. linux on it was a pain [13:46] bbl [13:46] I see [13:47] but leopard is a bit old by now [13:47] any girls ? :) [13:48] damir_, do you have an ubuntu question ,?> === bobbyaldol is now known as bobbyaldolAFK [13:48] damir_: 1500+ people in here...I'd be stunned if they were all male. What does that have to do with ubuntu? [13:48] i am new lunix user... [13:48] silverarrow: i just used it as a ssh terminal. [13:48] after a failed boot there is no countdown in grub. how do I change that? I want to boot the default entry without any interaction with grub, always. [13:49] i haw many questions to ask [13:49] damir_: why don't you ask them then? [13:50] haw can i install software on pinguy os ? [13:50] damir_: we only support ubuntu in here [13:50] i quit w7 [13:50] ok thanks [13:51] damir_: pinguy is an unsupported derivative. You need to go to their support places === CalumMc is now known as TweetBot [13:51] well, i wanna to quit w7 as well. [13:51] :) === TweetBot is now known as CalumMc [13:51] quit lol xD [13:51] damir_: try "/join #pinguyos" [13:51] ok thank you man [13:52] i have install ubuntu alongside with ubuntu. So, can i take all document from w7 to ubuntu and format w7? === james is now known as Guest82665 [13:54] partion w7 also file on ubuntu. [13:56] Hi [13:56] hello world [13:56] How can I activate gestures with Ginn? [13:57] there is this wiki page: https://wiki.ubuntu.com/Multitouch/Ginn [13:57] but I don't understand how to use it [13:57] Any ideas? === ddee is now known as _dd [13:59] excuse ikonia me what's the difference between wine and qemu? [13:59] wine is an API replacement layer...qemu is a processor emulation layer [13:59] hello [13:59] ari-santihiyu, qemu is a virtual machine. wine emulates windows [14:00] BluesKaj: I gave it another try anyway, and the nvidia-xconfig generated config leaves my two working screens with a bright gray, and the first one still doesn't work. [14:01] theenk yuu, so if I want to use a windows program inside ubuntu, what's the better compdoc? [14:01] i am running 12.04 on Hyper-V, i have 1 nic and i am able to reach to my server from outside. i need to add 2nd public IP but it's using another gateway. so basicly i want to add eth0:0 but its not working [14:01] qemu is better but requires more CPU? [14:02] IsUp: Of course thats not working, because a second nic will be eth1 and not eth0:0 [14:02] bekks: i want to use one nic. is that possible? [14:02] IsUp: No. [14:02] IsUp: it's certainly possible...I've done it [14:03] ssta: i've heard "bridging" interface or something but i am kinda noob on networking [14:03] here is my current configuration: http://pastebin.ca/2168763 [14:03] ssta: Two virtual IP on the same physical NIC residing in different subnets? Show us a working example please. [14:03] IsUp: bridging is something else. What exactly do you want to do? [14:03] bekks: it's a common configuration. [14:03] ari-santihiyu, qemu is great for running a server that doesnt need fast screen display, like for games. ANd for running the wndows VM automatically each time you boot Ubuntu. Depends what you want to do, but if you want fast video, even for programs like Adobe Illustrator, use Virtualbox [14:03] yes, different subnets and gateways in my case [14:04] I use qemu because I run Windows Server, and Linux servers [14:04] OK theenk yuu [14:05] compdoc: I am using VirtualBox for doing the same thing, but much faster than qemu. [14:05] bekks: i can add 2nd nic but somehow ive never make it working. so ive removed 2nd nic [14:05] bekks: do something like: sudo ifconfig eth0:1 192.168.10.10 netmask 255.255.255.0 [14:05] samster34, I'm sorry , but i have no experience with multiple screens personally , my recommendations are based on suggestions by other multi screen users experiences , perhaps you could ask in the chat in general , maybe someone else can help. [14:05] ssta: Then how would you assign a second gateway on that virtual nic? [14:06] bekks: route add ..... [14:06] BluesKaj: It's not about multiple screens. the first screen won't work at all, no matter if the other screens are connected or not [14:06] ssta: a second default gateway? :) [14:06] bekks: if they're different subnets, it should work fine. [14:06] bekks: no, you can only have one defaulty gateway [14:06] Having two default gateways is never supposed to be working. [14:06] ari-santihiyu, virtualbox can do most everything, and its faster, but it isnt really meant to run an OS as a server 24/7 [14:06] bekks: I didn't suggest it would [14:07] ssta: IsUp was asking on how to set that up. [14:07] ssta: i can see 2nd gateway on 'route -n' [14:07] bekks: he didn't mention second default gateway that I saw... [14:07] http://i.imgur.com/X1Amx.png this is the nvidia-settings page for the screen...there are no options, I can't do anything [14:07] IsUp: second gateway is different from second default gateway. [14:07] hi! my os randomly freeze (ubuntu 12.04). I read that others have the same problem... Is anyone know a solution for this? [14:08] let me pbin my route -n output [14:08] here: http://pastebin.ca/2168765 [14:08] IsUp: each gateway configured is for a dofferent 'network' (of whatever size). Anything NOT for that network goes over the "default" gateway. You can only have one default gateway [14:09] ssta: ok then should i add 2nd nic? [14:09] IsUp: it won't help [14:09] IsUp: this isn't an issue of how many NICs you have. [14:10] help, anyone? how can I add displaymodes to a screen? [14:10] IsUp: you haven't given the virtual interface a gateway... [14:10] ssta: okay, understood. what should i do in this case? [14:10] IsUp: what exactly do you want it to DO? [14:11] samster34, pastebin the output , dpkg -l | grep nvidia [14:11] Hello, I installed a arm compiler on my system for Codesourcery. I added it to a PATH but for some reason programs do not see it. I keep getting: "/bin/sh: arm-none-eabi-cc: command not found" while running make file or in Eclipse can anybody advise please?? [14:11] ssta: i need to make it working 2nd IP. but as i said i have 2 IPs with different gateways/subnets [14:12] ssta: i dont know the best approach, if needed i can setup another virtual server and run 2nd IP on it [14:12] BluesKaj: how does that help with the screen? [14:12] IsUp: that's fine...you need to setup the second IP with a gateway and make one of them "default" [14:12] ssta: okay adding 'gateway' in interfaces is enough for this? [14:12] IsUp: you will probably need to create some if-up scripts to do thisd [14:12] BluesKaj: http://pastebin.com/EcLZvhTY [14:13] samster34, it will give us a list of the drivers and nvidia apps installed [14:13] IsUp: not sure, but probably not. You need to run: "route add gw " for one of them, and "route add default gw " for the other [14:14] the issue is doesnt seem to be driver, it's the driver not auto detecting the monitor's display modes [14:14] ssta: okay i am not adding 'gateway' then. just trying route, right? [14:14] samster34, run an update and upgrade , your nvidia settings needs it [14:15] IsUp: I don't know if there is magic in /etc/networks/interfaces to do that for you. Have a look at "man 5 interfaces" to find out. Putting scripts in /etc/networks/if-up.d will definitely work [14:15] BluesKaj: can I just upgrade these? I don't want to spend an eternity upgrading libreoffice... [14:17] ssta: to be sure, should i run 'add gw' or 'add gw default'? [14:17] samster34, well ,sometimes a little patience is required :) [14:17] IsUp: you can only have ONE default... [14:18] BluesKaj: Well, my wirless connection sucks with ubuntu, and downloads take forever. I've been spending WEEKS trying to get ubuntu to work, and I'm kinda running out of patience :) [14:18] IsUp: it's the one it uses if nothing else matches [14:18] ssta: okay, one last question. i can see '2nd IP's gateway' on 'route -n', why is that? [14:19] ssta: and how can i remove this entry? i want to delete it before running the commands you gave me [14:19] IsUp: no you can't. The paste you provided didn't give a gateway for that NIC...only a subnet. So it will ONLY route traffic for that subnet to that NIC [14:19] IsUp: route del... [14:19] BluesKaj: apt-get says nvidia-settings is already the newest version... [14:20] test [14:20] anthology: it didn't work [14:20] ssta: okay i've removed now [14:21] Hello, Im getting the following error with my c++ eclipse juno project, with linux 64bits: "Error: description:Error 127 occurred while running autoreconf", "resource: MyProject", "location: -1", "type: Configure Problem". However my project builds successfully from command line. What is happening ? [14:22] BluesKaj: ?? [14:22] kristenbb: you might have more luck in #eclipse? [14:22] ssta: it says "gw: No address associated with name" [14:23] samster34, did you run sudo nvidia-xconfig , after this latest install ? [14:23] ssta: I tried there too and no I didn't get any answer :(. I'm having this problem for a few days and can't find any help anywhere :( [14:23] I've been having* [14:23] BluesKaj: yes, it left all screens non functional. [14:23] you want the config it generated? [14:24] IsUp: you need a static route to that gw first [14:24] ok samster34 , let's have a look [14:25] BluesKaj: http://pastebin.com/K6QgBCEK [14:25] ssta: sorry for confusion but may you point me to a similiar configuration or something? [14:25] ssta: my current configuration http://pastebin.ca/2168765 [14:27] BluesKaj: and with that config, the first screen stays off, and the other tow just display a light gray for all eternity. [14:28] hello [14:32] IsUp: http://linux.m2osw.com/two_ips_on_one_nic [14:32] samster34, have you rebooted since choosing the 303.17 recommended driver , that's all I can think of atm. Otherwise I'm out of ideas. Xorg looks normal but that doesn't mean much with multiple screens etc [14:33] BluesKaj: I have [14:33] the issue is the screen is not recognized, and the only mode listed is 800x600 [14:33] ssta: thank you, let me check [14:34] ssta: is that normal 'RTNETLINK answers: File exists' ? [14:35] yes , I'm aware what your issue is samster34. Are you sure the 302.17 driver is the recommended driver in restricted drivers ? [14:38] BluesKaj: I'm not sure of anything [14:40] samster34, i know you're focused on the xconf file , but if the wrong driver is in use then the settings won't be available in the nvidis GUI [14:40] nvidia GUI [14:41] it's not the driver, I think the screen isn't playing nice with the EDID [14:41] samster34: is the screen reporting EDID? [14:42] ActionParsnip: I dunno. It doesn't look like it. [14:42] samster34: you can check in /var/log/Xorg.0.log [14:42] samster34: good screens do it :) [14:42] ActionParsnip: what am I looking for in the log file [14:43] samster34: 'edid', you can even run: grep -i edid /var/log/Xorg.0.log to make the system do it for you [14:44] [ 57.350] (WW) NVIDIA(GPU-0): The EDID read for display device DFP-0 is invalid: the [14:44] [ 57.350] (WW) NVIDIA(GPU-0): checksum for EDID version 1 extension is invalid. [14:45] samster34: doesn't look great, the screen isn't reporting EDID, you'll need to tell the driver what refreshes to use and so forth [14:45] yup [14:45] ? [14:45] trying to add the modes to the xconf now === precise is now known as Guest99397 [14:46] ActionParsnip: hold on, I saw a thing somewhere about exporting the EDID from win7 and listing the binary file in the xconfig [14:46] samster34: worth a shot I guess [14:47] exit === `mOOse` is now known as m00se [14:47] when i execute a programe from menu list it said cant be execute as non root user [14:47] jalal: what app is it? [14:47] so how to execute that programe as non roo user? [14:47] remastersys [14:47] hmm it's impossible to find a good open source hdd erase utility that also fixes bad sectors [14:47] i installed it using su root [14:48] jalal: run: gksudo remastersys [14:48] i want to launch it from menu [14:48] jalal: you cannot install anything without root :) [14:48] i know but it giving me eeror [14:48] then you cant run this application as non root user [14:48] jalal: modify the .desktop file in /usr/share/applications and prefix the command with gksudo [14:48] hey guys how do you install remastersys on oncelot? [14:49] i did not understood action [14:49] !!info remastersys === lolcat is now known as lolmarihuanacat4 === lolmarihuanacat4 is now known as marihuanacat420 [14:50] leoleen: http://www.ubuntugeek.com/creating-custom-ubuntu-live-cd-with-remastersys.html lists the ppa [14:50] leoleen: http://dedoimedo.com/computers/remastersys.html [14:51] ActionParsnip thanks hey, let me check it out [14:53] people, how do i reset folder view settings in nautilus? [14:54] can any tell me, if I do ping http://domain.com/ how does it solve the IP? Does it do a full DNS lookup or? [14:54] excalibr,,, under 'View', not? [14:54] I am not able get my IP assigned to my ubuntu 12.04. I have a dynamic IP. It works pefectly on windows. any work arounds? [14:55] ... [14:55] Toph2: i want to reset views for all folders [14:56] ethernet problems anybody? [14:56] *ethernet problem solvers anybody [14:56] none for me thanks.. im driveing.. [14:57] ;) [14:57] excalibr,,, like, you want to switch between icon or list view? [14:57] info adante [14:57] I am not able get my IP assigned to my ubuntu 12.04. I have a dynamic IP. It works pefectly on windows. any work arounds? [14:58] gRAVIty_: no need to repeat that quickly [14:58] gRAVIty_: try: sudo dhclient3 eth0 [14:58] oCean: ok [14:58] gRAVIty_, ifconfig , look beside inet [14:58] ActionParsnip: does it work better than dhclient eth0? [14:59] gRAVIty_: worth a try [14:59] i bet the 2 commands are the same [14:59] BluesKa: When it does not work ifconfig gives IPV6 address [14:59] dr_willis: likely ;) [14:59] !find dhclient3 [14:59] File dhclient3 found in isc-dhcp-client [14:59] !find dhclient [14:59] File dhclient found in apparmor-profiles, augeas-lenses, avahi-autoipd, bash-completion, controlaula, ddclient, dracut-network, fai-nfsroot, initramfs-tools-tcos, isc-dhcp-client (and 16 others) http://packages.ubuntu.com/search?searchon=contents&keywords=dhclient&mode=&suite=precise&arch=any [14:59] Toph2: yes. apparently the view setting only work on new folders that you open [14:59] :) not quite how i wantes the info [15:00] gRAVIty_, set your router IPv4 as default [15:00] dr_willis: its a symlink [15:00] dr_willis: /sbin/dhclient3: symbolic link to `dhclient' [15:00] ActionParsnip: can you look into this thread . I have very detailed diagnosis for the problem [15:00] gRAVIty_: do you use IPv6? [15:01] excalibr,,, well, all i can suggest is you play around under 'View' in Nautilus and see what some of the options give you [15:01] BluesKaj: already done that [15:01] ActionParsnip: I dont use IPv6 [15:01] gRAVIty_: could disable it in the kernel with the boot option: ipv6.disable=1 [15:01] if using a router.. why not just set a static ip for the box. and let the router reserve it. [15:02] dr_willis: I have a dynamic IP from the ISP and I dont have a router [15:02] ActionParsnip: I tried this http://www.ubuntuvibes.com/2011/01/quick-tip-how-to-disable-ipv6-in-ubuntu.html [15:02] shoudl I try the boot option u suggested? [15:02] now? [15:03] gRAVIty_: could try setting a static IP in your subnet and set the gateway as the router's internal IP, see if it pings... [15:03] ati opensource driver (default).. dual monitors.. on my TV (1920x1080) the resolution is actually 'bigger' than the screen, so the outer edges ain't on the screen. any ideas? [15:03] hello everyone im running ubuntu server for the first time and i like to have autu backup now and again i herd bacula is the shit for this but also herd it might be overkill and over complicated for my small needs?...so what say you what would you recommend? [15:03] Btw it is sporadic. This happens only sometimes. [15:03] Erealz: please mind your language in this channel [15:04] klj613: thats the 'overscan settings' causing issues. tweak the option on the tv. or the video card config settings. [15:04] ActionParsnip: Ihave no router. I think I need to get a router to try your method [15:04] gRAVIty_: is the ethernet cable ok? have you tried a different port on the router? [15:04] gRAVIty_: then whet does the wire connect to? [15:04] ActionParsnip: i am right now chatting with the same ethernet cable on windows [15:04] hello everyone im running ubuntu server for the first time and i like to have autu backup now and again i herd bacula is the great! for this but also herd it might be overkill and over complicated for my small needs?...so what say you what would you recommend? [15:04] dr_willis, not sure what to tweak but i'll google it, at least i got a keyword to seach now (overscan issue) :) thanks [15:04] klj613: my tv let me turn it off in its settings. [15:04] Erealz: No need to repeat it once a minute. If someone knows the answer, you'll get the answer. :) [15:05] ActionParsnip: The cable connects to a small box with two pins RJ-45 and ODU. It is a wireless wired net. I have a box on top of my house which connects to my computer through this small box [15:05] bekks, he changed a word. [15:05] wdp: Wow. [15:05] ok [15:05] :> [15:05] we dont know what your needs are Erealz :) [15:05] why has the ability to make desktop shortcuts been removed from 12.04? [15:05] dr_willis, ah, i see what you mean. thanks! :) [15:05] gRAVIty_: I'd try the static IP, just to test [15:06] ActionParsnip: can I try without a router? [15:06] gRAVIty_: sure, just set the same IP settings as you have in windows, IP, gateway and DNS server [15:06] nrdb: make them in your Desktop directory perhaps with the file manager? [15:07] what the best way to manage the GPU fanspeeds? is there anything which will increase the fanspeed as the temp increases. [15:07] ActionParsnip: I had not thought of that! gimme a minute [15:09] klj613: thats how it works normally from wwhat ive seen on my laptops [15:09] ActionParsnip: I just have to set these things in the network manager right? [15:09] dr_willis, there used to be a simple way to do this... now it has to be done by creating the .desktop file manually... which is a real pain... and error prone ... why was the previous method removed? [15:10] Hi [15:10] nrdb: i just drag/drop a existing .desktop file if needed.. ask the gnome-devs.. i imagine its part of the 'less cluttered desktop' mindset. I dont put any icons on my desktop [15:10] any one there [15:10] 1000+ people here priyanka [15:11] dr_willis, my fan speeds seem a bit fast at the moment, when the load should be low. on windows i used msi afterburner to do my own settings (e.g. get to x degrees, go to x% speed) [15:11] gRAVIty_: sure, set the interface to manual and specify the addressing [15:11] :-) [15:11] dr_willis, I have had to since there are no menus to add to now... and most of the applets I used to use don't work anymore. [15:12] ActionParsnip: Will get back to you 3 minutes :) [15:12] nrdb: no menus to add to now? what applets? therss indicator-applets for most every need listed at the askubuntu.com list od indicator-applets [15:13] i installed ubuntu under windows but getting the some errors .. [15:13] some log errors [15:13] dr_willis, there are only a handful in the software center... which is where I looked. [15:13] its reverting the installation [15:13] what to do [15:13] ????? [15:14] anyone pls answer [15:14] clarify what you mean priyanka and have a little patience....... [15:14] hurry clarify it! come on! [15:14] hurry1 [15:14] (get the point?) [15:15] priyanka, what did those errors say? === dark3n|off is now known as dark3n [15:17] priyanka wubi? [15:17] ya .. i have installed ubuntu under windows using wubi ... but its showing the error "C:\users\myname\info\appdata\local\temp\wubi-11.04-rev211.log." and reverting the installtion under windows 7 [15:17] wubi :( [15:17] ssta: i am getting 'SIOCSIFFLAGS: Cannot assign requested address' for eth0:0, something wrong [15:17] priyanka, use paste.ubuntu.com for that log please [15:17] Hey everyone, I'm having some issues I was hoping someone could help me with... Firstly; my background blacking out when I click my desktop. My second issue is that I'm getting crash reports and I'm not sure what exactly is crashing. I'm not sure if they are related. [15:19] ActionParsnip: well, that didn't work. and neither did adding a displaymode manually [15:19] priyanka, and i would use 12.04 instead of 11.04. ( updating a wubi install can mess up easily ) [15:19] ActionParsnip: you there? You are aweosme! You just solved a problem I have been strugging for the past 17 DAYS! [15:19] gRAVIty_: haha np dude :) [15:20] gRAVIty_: unless they change your ip# again? ;P [15:20] gRAVIty_: suprised you didn't just sety it anyway, its a wired connection so you don't need DHCP as the system isn't going anywhere [15:20] or did i miss some fancy fix? [15:20] ActionParsnip: Really. I had atleast 2 mods of ubuntuforums helping me out and it did not work [15:20] i was using 12.04 wubi's only [15:20] :-) [15:20] ActionParsnip: Now I can make it work whenever i want. anyway cool :) [15:21] err.. if the isp is setting a dynamic ip.. then it can change. and need dhcp. but not for the DNS. ? [15:21] gRAVIty_: any wired systems I put no static IP and uninstall network manager, makes the OS sleeker [15:21] ActionParssnip: I tried adding those two lines in /etc/network/interfaces [15:22] it did not work [15:22] gRAVIty_: i see, strange [15:22] do u think uninstalling network manager helps? [15:22] gRAVIty_: if its all working I wouldnt touch it [15:22] gRAVIty_: I was about to say if it aint broke don't fix it. [15:22] you got it working, leave well enough alone:) [15:22] IdleOne: thanks [15:23] untill it breaks next time [15:23] Idleone: So I should keep this on all the time eh :) [15:23] Can somebody help me with this crash log: http://paste.ubuntu.com/1081310/ [15:24] ActionParsnip,IdleOne:or may be I will just get a router and put my linux on manual. that should work even if the ip changes right? [15:24] gRAVIty_: I am not sure of what the original problem was but I saw you thank ActionParsnip and say it was working. Don't go looking for more problems, is all I am saying :) === Guest78263 is now known as Dorito [15:24] IdleOne: This is a one time fix. though i can use it everytime it does not work === chrisward is now known as Guest20974 [15:26] ActionParsnip: If I get a router will this problem be solved permanently? [15:26] unless the router has a hard time getting an ip/dns ;) [15:26] Does anyone have a few minutes to help? [15:26] having trouble with my wireless bcm4306, have installed legacy installed fwcutter -- still no wlan [15:27] Nogal: what's your problem ? [15:27] dr_willis: haha. The router thing is promised by the ISP. I am asking can I have a static IP when I put a router [15:27] I've got two issues. I've got "telepathy" crashing, and I'm not sure what it does. And I've got my desktop blacking out whenever I click it. [15:27] the isp is giveing ypu a dynamic ip. it may change at any time.. or not for weeks [15:28] falstaf, did you reboot after install ? [15:28] dr_willis: But that does not effect the IP on my laptop. or does it? [15:29] OerHeks, yes I have tried for hours and rebooted several times. === andrejpan_ is now known as andrejpan [15:29] if laptop is getting ip from isp...yes [15:30] I don't know how to check what is wrong [15:30] falstaf: i had a hard time getting my broadcom card working on my thinkpad as well, i tried a few different drivers until I came upon one that wrked for me [15:30] which is the driver you're using currently? [15:31] I dont know how to check that -- [15:31] dr_willis: hmm. thats confusing. I was thinking the IP gets assigned to the router and the IP on my laptop will be assigned by the router. Is that correct? [15:31] falstaf, my MCB works great with this driver > " sudo apt-get install b43-fwcutter firmware-b43-installer " [15:31] *BCM [15:31] Nogal: 1st issue -> telepathy is related to your Instant Messenging stuff. What component of telepathy is crashing ? Normally the crash report should mention telepathy-something, this something is important to know. [15:32] router has a wan ip from the isp. and a lan ip for the home lan [15:32] falstaf: try what OerHeks just suggested. it was what worked for me as well, although I had to install the firmware manually because my card was "not tested" [15:32] gigiix: http://paste.ubuntu.com/1081310/ [15:32] okay [15:32] falstaf: can you please pastebin the output of "lsmod"? [15:32] gigix: in short: telepathy-salut [15:33] how do I pastebin [15:33] falstaf: go to paste.ubuntu.com [15:33] copy what you want to paste into http://paste.ubuntu.com/ [15:33] it'll give you a link, you paste that link here [15:33] falstaf: just copy the line of texts then paste it there at paste.ubuntu.com as Nogal and pv2b said [15:34] ( would be awesome if IRC clients would have a sort of "automatic pastebin". ) [15:35] arent these rooms logged [15:35] pv2b: to know that it only can send one line of text is hurting.. :( [15:35] Nogal: if you still have the report somewhere, could you check if it looks like one of these bugs ? https://bugs.launchpad.net/ubuntu/+source/telepathy-salut [15:35] !log | lysergide [15:35] lysergide: Official channel logs can be found at http://irclogs.ubuntu.com/ . LoCo channels are now logged there too; for older LoCo channel logs, see http://logs.ubuntu-eu.org/freenode/ [15:36] pastebin is a good thing though, stops walls of texts appearing in a middle of a conversation. there's nothing about the IRC protocol that precludes you from posting a lot of text, just server-side limits and general netiquette. [15:36] gigix: is that the /var/crash/*telepathy-salut.1000.crash file? [15:37] hello [15:37] pc2b see !pastebinit [15:37] !grub2 [15:37] GRUB2 is the default Ubuntu boot manager since 9.10 (Karmic). Lost GRUB after installing Windows? See https://help.ubuntu.com/community/RestoreGrub - For more information and troubleshooting for GRUB2 please refer to https://help.ubuntu.com/community/Grub2 - See !grub1 for releases before Karmic (9.10) [15:37] !pastebinit [15:37] !grub2 [15:37] pastebinit is the command-line equivalent of !pastebin - Command output, or other text can be redirected to pastebinit, which then reports an URL containing the output - To use pastebinit, install the « pastebinit » package from a package manager - Simple usage: command | pastebinit -b http://paste.ubuntu.com [15:38] that's pretty cool :-) but i was thinking of more like "you paste something in your IRC client, and it automagically turns that into a pastebin link". I know irssi for example has heuristics (at least it did, when I last used it like 5 years ago) that detect when you paste into the terminal and asks you if you really want to paste. [15:38] Hi all. Can I simply cut and paste the ### BEGIN and ### END blocks in /boot/grub/grub.cfg, in order to change my boot order? [15:38] gigix: I'm not sure what I'm supposed to be looking for here.... [15:39] covi: do you want windows to be the top? [15:39] covi: the ### BEGIN and ### END "blocks"? those are just comments, so moving them won't change nanything [15:39] Thanks for the help with pastebin I have posted the info [15:39] ActionParsnip: I want Win7 to be the second, Ubuntu the first, and all other Ubuntu variants under [15:39] falstaf: what's the link to your paste? :) [15:40] salve a tutti, [15:40] Nogal: I don't know whether the crash reports are saved somewhere after you closed Apport [15:40] hey any django people here? [15:40] I think I figured out how these are labeled; title: telepathy-salut crashed with signal 5 in g_return_if_fail_warning() [15:40] pv2b: I mean everything in between as well [15:40] I usually leave it open, check which package is concerned and seek for a similar bug in the list [15:41] http://paste.ubuntu.com/1081327/ [15:41] Nogal: can you reproduce the bug ? [15:41] gigix: h/o [15:41] covi: grub.conf is autogenerated so you shouldn't edit it directly or it'll just revert next time you get a kernel update, check the comments at the top of the file [15:41] i want to define 2 IPs on 1 NIC. may someone help me about configuration & routing? === angela is now known as Guest85023 [15:42] IPs has different subnets/gateways [15:42] can anybody connect to #django ..? [15:42] gigix: is this what you're looking for? http://paste.ubuntu.com/1081332/ [15:42] i can't connect [15:42] Nogal: looks like it :) [15:43] covi: my particular system deosn't have windows in grub, so I can't really confirm, but I think what you want is take al ook at what's in /etc/grub.d [15:43] I dont see any referance to any wireless driver being loaded! [15:43] gigix: future reference /var/crash [15:43] falstaf: yes, that is my conclusion as well [15:43] Nogal: thanks ! [15:43] falstaf: what happens when you do modprobe b43? [15:44] pv2b: looks not that straightforward [15:44] interdesting [15:45] Nogal: we're looking for that: telepathy-salut crashed with signal 5 in g_return_if_fail_warning() in the existing bug reports [15:45] covi: just a moment [15:45] 321 [15:45] I don't see one in the bug-report? [15:46] Any one who can help me with Kile in ubuntu 11.10 [15:46] I see this one: telepathy-salut crashed with signal 5 in g_socket_address_get_family() [15:46] salve a tutti. sapete come posso far funzionare la chiavetta onda mw875up-k su ubuntu 12.0.2 [15:47] Nogal: is it easy to reproduce the bug or is it random ? === rocket16 is now known as cookie-monster [15:47] Figuring out that it has to do with chat clients let me try to reproduce it. brb. [15:48] http://paste.ubuntu.com/1081339/ [15:48] Hey! [15:49] I am installing 12.04 lts desktop alongside w7 on ACER aspire one D257 laptop. now w7 wont start and ubuntu boots only with flash stick on . seems grub was installed on flash instead of internal sda [15:49] covi: would it be acceptable to have windows first, ubuntu second, and all older ubuntu kernels below that second entry? but have the default selection be ubuntu? so you'd just hit arrow-up to get to the Windows install. [15:49] I need some help with a shell script. [15:49] gigix: it appears to be random. [15:49] Nogal: did it happen again ? [15:49] shredding: you'll need to ask your actual question so that people know what it is to allow them to answer you [15:49] pv2b: that's cool! [15:49] gigix: no [15:49] falstaf: oh, i shoudl have said, you need to do "sudo modprobe b43" - since it needs to run as root. my mistake. [15:49] Lots of errors -- has to be some kind of software issue ... it ran fine on 11.04 [15:50] sw sorry, one sec [15:50] any one knows how to use kile [15:50] cntb: then run: sudo grub-install /dev/sda [15:50] okay [15:50] sw I have hash=$(echo -n $1$2 | openssl sha1 -hex) as script and it calculates the correct hash. [15:50] however, the var $hash is not the hash but (stdin) = hash [15:50] Nogal well you can report the bug with "telepathy-salut crashed with signal 5 in g_return_if_fail_warning()" as a title and enclose the crash file with it [15:51] How can I get rid of (stdin) and get the pure hash? I'm not that familiar with pipe routing. [15:51] covi: in that case, you can edit /etc/default/grub to change GRUB_DEFAULT=0 to GRUB_DEFAULT=1 - this'll put the second boot option as your default. and then... [15:51] Nogal: and mention that it happens randomly [15:51] hey, not exactly an ubuntu problem, but I'm trying to use imagemagick to merge a bunch of very large images - it returns prematurely though, with no error messages, an incomplete output [15:52] sw http://pastebin.com/LeEFZfF4 [15:52] covi: then you do mv /etc/grub.d/30_os-prober /etc/grub.d/09_os-prober [15:52] covi: then you can do sudo grub-mkconfig [15:52] covi: that *should* change the boot order. [15:53] pv2b: 09_os-prober? [15:53] covi: yeah, we just want to rename the file 30_os-prober, changing the 30 to 09... so that it appears before the linuxen [15:54] Anyone help with address for SMTP server (for sending) for gmail? please. For Alpine mail client.Tried 'smtp.gmail.com:587/tls' and 'smtp.gmail.com/tls/user=username@gmail.com' but neither work. [15:54] pv2b: so the number itself does not matter so long as the order holds? [15:55] covi: the numbers are just there to define which order the files are included in [15:55] any ideas as to why my background blacks out? === kreator is now known as thekreator === nothing is now known as Guest82714 [15:55] anthology: do you get some form of error message? === thekreator is now known as Kreator [15:55] does anyone know an image viewer that handles big images well? [15:56] pv2b: should i run update-grub as well? [15:56] pv2b: yes [15:56] anthology: what is the error message? === MaccerBNC is now known as Maccer [15:56] samster34: GIMP === Kreator is now known as thekreator [15:56] covi: i would have thought the grub-mkconfig would regenerate the grub.cfg file? [15:57] samster34: mybe geeqie [15:57] I have a lot of references to b43 (and variants now) I will try a reboot [15:57] falstaf: no. [15:57] TheM4ch1n3, thanks, I'll give those a try.. [15:57] don't reboot it! [15:57] no [15:58] anything done using modprobe doesn't persist throughout reboots, if you reboot, the module will not be loaded :) [15:58] okay now what? hmmm [15:58] alpine access gmail, but can't smtp out. i read a website where the fellow solve he problem by using certificates. mutt/vim/w3m configuration helps access my gmail account and my private account. [15:59] you can name the module in /etc/modules and it will be loaded, or add the modprobe command in /etc/rc.local [15:59] so the module loaded. what if you type "iwconfig"? does the card appear? [15:59] ActionParsnip: we're not there yet :) going to see if we find a module that works for his hardware first before we try to make it persistent :) [15:59] what is the offical name of the wubi pre-loaded onto a boot disc?? === Lebby1 is now known as Lebby [16:01] it doesn't list the card by name but wlan0 does exist [16:01] mutt requires sasl to access gmail or any other account. [16:01] pastebin? [16:01] falstaf: okay. so, go ahead and see if you can configure and connect to your wifi through the graphical interface. [16:02] falstaf: nah, just see if it works better now :) [16:02] erm, all my windows lost their 'borders' (including the top thing u use to move them LOL) [16:02] klj613: sounds like your window manager just crashed. [16:02] :( and installing SC2 via wine atm. im about to go anyway so i restart it when sc2 finish (hopefully when i get back) [16:03] I've got a system with only 100 MB free disk space, and apt-get wants to install >200MB of upgrades [16:03] no wireless found -- is it possible it is loading too many drivers?? [16:03] apt-get upgrade keeps stalling and crashing as disk space gets filled to 100%. What should I do? [16:03] hi [16:03] beaky: do you have excess kernels? [16:03] alpine is great because it has a builtin editor. mutt needs to configured with vim or other editor to write your emails. w3m is used to read html emails better. [16:03] falstaf: it's possible that there's no firmware loaded for your card. can you please do a pastebin of the output of "dmesg"? [16:03] beaky: also run: sudo apt-get clean [16:04] i just ran ecryptfs-unwrap-passphrase, and after typing the passphrase, it shot out a bunch of numbers [16:04] pv2b: thanks, it works perfectly [16:04] should i write these numbers down? [16:04] covi: no problem! just be aware of one thing [16:04] ran that, but I still end up with only about ~100MB free disk space :( [16:04] dmesg [16:04] covi: this'll break if you ever install more OS:es on your machine, since the default grub entry is the second one (number 1) [16:04] beaky: can you give a pastebin of the output of: lsb_release -a; uname -a; dpkg -l | grep linux-image [16:04] alright [16:04] covi: so if you have more "other OS:es" installed it'll always pick the second one [16:05] beaky, how large is the partition ?, you obviously have expand it [16:05] covi: if that happens you need to update your /etc/default/grub accordingly [16:05] Hello [16:05] argh...help, I need to copy a folder somewhere, but doing 'cp /source/* /target/' gives me "argument list too long" [16:05] samster34: cp -R /source /target/ [16:05] pv2b: I see, thanks! If one day I need to delete my Ubuntu system, can I just format the partitions without worrying failing to boot? [16:06] pv2b: ahh, thanks [16:06] alright I've done rm -rf ~/* and there's room now [16:06] covi: I don't think it woudl be a problem. grub would still give you the option to boot into ubuntu [16:06] I'm here purely to tell you guys about an awesome game i stumbled upon. It's amazing, and i think it deserves alot more popularity! Check it out! seriously, its awesome! http://e-sim.org/lan.93965/ [16:06] covi: but you'd just have to arrow up to boot windows, [16:06] really, its a great relife e-sim browser game [16:06] pv2b: I mean delete Ubuntu. Grub will be gone. Can I then boot Windows? [16:06] check it out guys [16:07] http://e-sim.org/lan.93965/ [16:07] http://e-sim.org/lan.93965/ [16:07] http://e-sim.org/lan.93965/http://e-sim.org/lan.93965/ [16:07] ImAwesomeBro: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation. [16:07] covi: shouldn't be a problem. [16:07] amores [16:07] pv2b: thanks :) [16:09] http://paste.ubuntu.com/1081373/ [16:10] The last few lines are the ones that suggest the problems ... [16:10] there we go. as I suspected. the firmware files are missing. on my system I had to deal with that manually. just a moment. [16:10] !find pash [16:10] File pash found in dasher-data, fpc-source-2.4.4, freeciv-data, texlive-xetex, zekr [16:11] falstaf: can you please do "sudo apt-get --reinstall install firmware-b43-installer" and pastebin the output for me? === lub` is now known as lubmil [16:13] ati opensource drivers (default): how to change GPU fan speed? [16:15] klj613: moan to developers ! [16:15] Anyone here got any knowledge of Puppy or Damn Small Linux? [16:15] hey [16:15] kompozer is kind of dreamweaver right [16:15] hellyeah right [16:15] dangercrow: well, I don't but I am thinking of downloading it [16:15] dangercrow: how is it, have you got it installed ? [16:15] TheM4ch1n3, so your saying there isn't a way to change the fan speed? lol [16:15] Great-Danton: [16:16] ? [16:16] Hello, I installed a arm compiler on my system from Codesourcery. I added it to a PATH but for some reason programs do not see it. I keep getting: "/bin/sh: arm-none-eabi-cc: command not found" while running make file or in Eclipse can anybody advise please?? [16:16] TheM4ch1n3: Nope, I'm looking into a lightweight distro, but I wanted to know about it before I installed it xD [16:16] can you do same thing with kompozer everything [16:16] TheM4ch1n3: Which one were you gonna get? [16:16] what is the offical name of the wubi pre-loaded onto a boot disc? [16:16] klj613: well there may be, but its in the docs, or else in the sourcecode === rowan is now known as Guest46208 [16:16] if i'm going to change the size of an encrypted home partition, is there anything special i need to do before hand? anything different from a non-encrypted [16:17] hellyeah; I am not Web Developer so I can't tell you for sure. Look on Kompozer's site and read [16:17] http://paste.ubuntu.com/1081385/ [16:17] dangercrow: also its a "dormant" project [16:17] dangercrow: http://www.itreviews.com/software/operating-systems/dsl-damn-small-linux-4410/ === ponbiki is now known as Guest19154 [16:18] what is the offical name of the wubi pre-loaded onto a boot disc?? help plz [16:18] This looks promising should I redo using suggested apt-get?? [16:19] hola ism [16:19] meoblast001: backup your files to an encrypted DVD/CD [16:20] hi. I've seen the tutorials where they teach you the basic principles of uml diagrams but I was wondering if anyone here happens to know where I can find something that walks you through a real uml project? Something where you start at the beginning and follow along step by step with a real example project? [16:20] TheM4ch1n3: but aside from that, just changing the size should not destroy everything? i mean... no more than on a normal partition [16:21] falstaf: okay, try apt-get --reinstall install firmware-b43legacy-installer and pastebin it. [16:22] meoblast001: well it depends, did you use LUKS, because, if you did, you just resize the filesystem after activating the LUKS slice, and remember the encryption step is performed in-between the resizing [16:22] i'm not sure what i used [16:22] i just selected the encrypted partition option in the installation [16:22] whatever that uses is what i used [16:22] oh [16:23] well if you have your files somewhere safe, go for it, also you could try out a "fake" attempt inside VirtualBox / Qemu [16:23] TheM4ch1n3: I'm downloading DSL now, anything you want me to check particularly on it? I'm gonna be running it in virtual box, and testing if it can do java === evilbug_ is now known as evilbug [16:24] How do I give www-data root permissions, I don't care about the risks at all. [16:24] what is the offical name of the wubi pre-loaded onto a boot disc?? [16:25] padmick1: what do you mean? all of the ubuntu isos have wubi on them as an installation option as far as I'm aware [16:25] but it is not called wubi [16:26] dangercrow: ftp://ftp.is.co.za/linux/distributions/damnsmall/current/1-readme_first.txt [16:26] oh! you mean... what is it called when you put the CD in and double click it [16:26] what appears on the screen and stuff [16:26] http://paste.ubuntu.com/1081402/ [16:26] dangercrow: almost very OS can do Java, but yes, testing DSL is a good idea =) [16:26] *every [16:26] falstaf: you missed the --reinstall [16:27] no what is the offical name of the software on an iso that allows u to duel boot [16:27] okay ... [16:27] falstaf, have you done, sudo modprobe b43 [16:27] TheM4ch1n3: ah, ok. thanks.. just need to give a little more space to /, because i'm running out lol [16:27] TheM4ch1n3: I did once try TinyXP, and that had real problems with Java I found xD It was missing so many dependencies for everything xD [16:27] BluesKaj: he has, but the firmware is missing. going to see what the legacy firmware installer fell over on [16:28] BluesKaj: because he ran it earlier [16:28] wonder about the repos he's using , pv [16:28] pv2b,^ [16:28] I have an inspirion 1100, trying to get ubuntu to run. When I run the installer, it is full screen and looks fine. When I boot up, it only takes up a little more than a 1/4th of the screen. Is there a boot setting I can change for this? [16:28] cus i wish to un- install it === oln_ is now known as oln [16:28] TonsilloSloth: are you fully updated? [16:29] ActionParsnip: As far as drivers? When I install ubuntu I have it install updates during the install [16:29] padmick1: you want to uninstall ubuntu installed via wubi, is taht correct? [16:29] TheM4ch1n3: What's qemu used for? Never heard of it before xD [16:29] meoblast001: I suggest checking /tmp for junk, or mounting /home to a LVM slice [16:29] No additional drivers or resolutions [16:29] TonsilloSloth: recheck with: sudo apt-get update; sudo apt-get upgrade [16:30] i wish to unstall everythin but on the last pc i done it it the wubi remained [16:30] wipe the pc clean [16:30] padmick1: did you use programs and features in windows to remove it? [16:30] dangercrow: its like VirtualBox, just without a GUI, ie CLI, and I use it CLI because it is more configurable, is a tiny bit slower than VBox, but more stable [16:31] TheM4ch1n3: LVM slice? [16:31] meoblast001: Linux Volume Management, I always leave free physical space on my HDD (LVM PV Free space) [16:31] ooh, i don't know if i set one of those up :| [16:32] note wubi on an iso does not appear on windows cus it was not installed on windows cus it was installed on a boot disc so windows programs are useless [16:32] hi .. could somebody explain me which driver i should use ? have a nvidia 9600M GT and thought that 295.xx would be fine .. but now the nividia settings shows me that im using 302.17 [16:32] dangercrow: I don't think this is what you mean? -> [16:32] http://en.wikipedia.org/wiki/TinyXP [16:33] sybrek: if you run: apt-cache policy nvidia-current what is output (please ise a pastebin to hold the output. Thanks) [16:33] klj613: check out http://www.x.org/wiki/RadeonFeature#KMS_Power_Management_Options [16:33] any ideas? [16:34] http://pastebin.com/w9sHeDNA [16:34] padmick1: ok do you have only windows on the system but the wubi loader still shows. Is that right? [16:34] http://paste.ubuntu.com/1081420/ [16:34] what do i do ? My workspaces and Dash is black & white [16:35] dangercrow: I use Knoppix as a Live/Rescue disc, it atleast uses a fairly modern kernel, so hardware doesn't really give much/any problems [16:35] sorry gotta go talk about it later thanks [16:36] how do i restart Dash home & Workspaces ? [16:36] Greets, everyone... Any packaging experts around? I used this guide - http://is.gd/TWpHJh - to make a bunch of packages (mainly for scripts, themes and whatnot) and I've been trying to figure out how to upload them to a PPA. I'm assuming I need to use debuild to generate the necessary .changes files from the .debs I already have, but I've been unable to figure out how. Any help would be much appreciated. [16:36] contrast: debuild -S [16:37] Hey Ubuntu, I am wanting to recommend an Operating System to a friend [16:37] what is Ubuntu best for? [16:37] Generalcamo: getting users into using Linux [16:37] yeah TheM4ch1n3 it was a nlited version called tinyxp, but yeah so much had been removed xD [16:38] Generalcamo, I use it for servers, but its great as a desktop too. Lots of free programs to do lots of cool things [16:38] She is an Avid Gamer, would it be good for her? [16:38] contrast: although, that won't work with that guide as far as I can tell, use the linked: http://www.debian.org/doc/manuals/maint-guide/ [16:38] falstaf, now run, sudo modprobe b43. again [16:39] Generalcamo: depends on the games, as a proper gamer, windows is probably a smarter choice [16:39] dangercrow: ok [16:39] this looks pretty interesting ... -> http://distrowatch.com/table.php?distribution=poseidon [16:39] TheM4ch1n3: I'm also booting up a lubuntu machine whilst DSL downloads [16:40] i have a 60 gb harddrive i pulled out of a laptop, i am connecting with usb 3 and after a minute or so it just disappears, what could be wrong? [16:40] TheM4ch1n3: is there anything particular you want me to test? [16:40] duhamel: check dmesg command for errors [16:40] im running Ubuntu studio 12.04 [16:41] okay seems to have put me back to a prompt. [16:41] could be flakey hd. or weird usb3 issue [16:41] duhamel, does it show up if you do lsusb in the console ? [16:41] dangercrow: you mean with DSL ? [16:42] TheM4ch1n3: Yeah, or with lubuntu too if you want? [16:42] falstaf: i still didn't see the output of apt-get --reinstall install firmware-b43legacy-installer" [16:42] falstaf, that's good , no errors [16:42] falstaf: that should be able to tell me why the firmware never got installed [16:42] it did have errors and i was tryiong to copy it with ddrescue but it would just shut off after a bit i tried freezing it and it still would stop not ate the same spot in data transfer eitrher.so i gave up on recovery wrote a new partition table and it's still doing it. [16:42] dangercrow: well running it in a VM, should allow the "hardware" to work, and using a very new linux kernel in VirtualBox/vmware/Qemu , would most often need an upgrade of the VM software [16:43] http://paste.ubuntu.com/1081420/ [16:43] dangercrow: btw, why do you need Java from DSL in a VM, I cannot figure out a use for that ? [16:43] ActionParsnip: Ran all updates, ubuntu still only displays on 1/4th of the screen (as opposed to full screen in install mode) Isn't there a boot setting I can change to do legacy graphics mode or something? [16:43] duhamel: i wouldent trust the drive. how old us it? [16:43] is it? [16:43] it will show up for a bit then the light on the cable im ussing switches to a 3 blink pattern and its gone no matter how i try and list it. [16:44] Im having some trouble getting Ubuntu 12 to work on my thunb drive. i get it installed on the drive and all. but when i boot up, i get a error screen right off in DOS. and after selecting "removeable drive" i get a screen saying "Verifying DMI Data.." which lasts forever. I also tried Unetbootin, but that never fully starts Ubuntu either (keeps going back to the options menu). could I be... [16:44] and why doesn't distrowatch list the kernel version in the OS they talk about ? [16:44] ...doing something wrong or could i have a bad drive? [16:44] about a year old. [16:44] duhamel, what about a usb2 input ? [16:44] i am thinkinmg its dying but it doesn't beep or click. [16:44] dengaku_sco: DOS ? [16:44] falstaf: oh, that's odd. so it's not looking in the same place. try this: [16:44] TheM4ch1n3: I just want to run a java box basically, that's light on RAM and hard disk space === root is now known as Guest10408 [16:44] same thing with usb 2 3 esata or internal sata [16:44] 60gb and recent? seems weird [16:45] sudo modprobe -r b43 && sudo modprobe b43legacy [16:45] or bios or watever [16:45] hey i need help! when i installed ubuntu i chose to install ubuntu to the same drive as windows vista and no when i start my computer it automatically goes to ubuntu and i need to start windows vista!!! [16:45] please help! [16:45] now* [16:45] pv2b, falstaf why the legacy installer , the b43 driver is the current one for most broadcom BCM43XX chips [16:45] TheM4ch1n3: But using an ubuntu box gives me the ability to route it through a proxy for when I need to do some testing from an external connection [16:45] dangercrow: well with Java, if its for development and you are simulating low RAM and low sys specs, then I understand [16:45] ubuntu software center grub customizer [16:45] Macuser: state the issue.. not ranting [16:45] i did [16:45] BluesKaj: most - not all. [16:45] look at my first post [16:46] dangercrow: sounds very complicated [16:46] BluesKaj, I am encouraged ... my guess is that editing blacklist [16:46] BluesKaj: http://paste.ubuntu.com/1081385/ [16:46] TheM4ch1n3: Na not really, you basically got the gist of it xD [16:46] BluesKaj: that's why i'm telling him to modprobe b43legacy [16:46] Macuser: download and install Grub Customizer and set it to look for other OS (It should by defualt) if not you may have overwritten vista during install [16:47] pv2b, yes understood , is the pc really old ? [16:47] Macuser: you see the windows drives from within ubuntu? [16:47] yes [16:47] i forgot what command i used to check [16:47] the bcm4306 likes the legacy software ... [16:47] but i did see windows vista loader [16:47] rerun sudo update-grub perhaps [16:47] did that [16:47] falstaf: did you try modprobe b43legacy ? did that run better? [16:48] yes [16:48] falstaf: so you have wifi now? :) [16:48] no it still says no wireless networks found [16:49] anything interesting in the dmesg? [16:49] okay [16:49] pv2b, falstaf , ok good to know for future reference , my apologies for the mistaken suggestions [16:50] dr_willis will this help? http://www.cyberciti.biz/tips/howto-fix-dual-boot-windows-vista-linux.html [16:50] drwillis or BluesKaj do either of you have any ideas or should i assume its the hard drive? I just think it's weird that it seems to be shutting off after a certain ammount of time, not when it reads a bad block, you know? even if i don't touch it it will shut down. [16:50] duhamel: tested ram? [16:51] no, what would that do? [16:51] duhamel: the apps run in ram, so if there is bad ram it may panic the os and cause issues [16:51] quick question: when im in gnome, my external usb device automounts, when i load up in another WM, like i3, it doesnt. how can i get this to work like it does in gnome? [16:51] all my other harddrives have no problem. [16:52] but even if i plug it in it mounts and unmounts and writes and reads fine for about a minute. then disappears. [16:52] crispus: make sure gvfs is running [16:52] dr_willis? [16:52] crispus: its a gnome service doing it. [16:52] it's the only HDD that's ever done this to me. [16:53] ActionParsnip: thanks [16:53] Macuser: try it and see.. how can i know... [16:53] dr_willis: thanks [16:53] question: I have 2 accounts on my ubuntu desktop. id like one account to have its home folder stored on my ubuntu server, how would i go about that? thanks [16:53] i just didnt know what it was called [16:53] dr_willis well the thing is that that link i sent you is to fix the opposite of what my problem [16:53] is [16:53] crispus: thers other automounting services. [16:53] ActionParsnip: what's the right command to have it run? [16:53] my ram is relatively new and not given me any problems that i've noticed so far. [16:53] When installing bind, do I need to update the dns entry under /etc/network/interfaces? [16:54] digitalghost: you could mount each folder via smba/sshfs etc to the remote server, the folders would look local but the actual storage will be on the server [16:54] ActionParsnip: im looking at gvfs-, and theres a bunch of options [16:54] crispus: maybe: /usr/lib/gvfs/gvfsd [16:54] duhamel, was the drive acting up in the laptop before you removed it ? [16:54] I am more confused than ever -- [16:54] crispus: http://paste.ubuntu.com/1081452/ I have those running here [16:55] falstaf, which ubuntu version ? [16:55] falstaf: after you did modprobe b43legacy - what turned up in the dmesg? [16:55] hey ! [16:55] I'm not sure i got the laptop with a busted screen and didn't even try to firte it up. the guy that gave it to me said it was running fine but he had to hook up to a monitor. [16:55] how can i take full folder permission [16:55] pv2b: could use: sudo modprobe -vv b43legacy [16:55] ubuntu 11.04 [16:55] ActionParsnip: thank you [16:55] BluesKaj, No problem I appreciate all the help -- I learn as I go [16:55] How do I set mouse polling rate to 500 or 1000Hz permanently, and also turn off mouse smoothing, acceleration, etc? [16:55] ActionParsnip, would i need to edit something in /etc on both the desktop and server? and how could i auto mount sftp://myaddress/home/user when i log in on my laptop? [16:56] digitalghost: you could use keys so you don't need a pass and you can add it to the user's startup [16:56] ActionParsnip: it appears i have all the same ones running [16:56] What's a common vga boot option for older machines... vga=791? [16:56] I am using Ubuntu 12.04 with Mate as the GUI [16:56] I don't know if i beleive him though, i bought him the laptop and then he gave it back when i fixed his PC. [16:57] He's kind of inconsiderate like that. [16:57] how to take full folder permission all the time !!!!!!!!!!!11 [16:57] help3333, what are you trying to do [16:57] help3333: you don't need it all the time [16:57] action all the time [16:57] m === nothing is now known as Guest99970 [16:57] help3333: so when you are surfing the web you need full folder access...no [16:58] yeah i want people ot hack me [16:58] ActionParsnip, thank you. how can i make it where the user on my laptop has its passwd stored on the server? trying to grab the login from the /etc/shadow from the server [16:58] if they ever care too [16:58] specially that it is linux not windows or mac [16:58] http://paste.ubuntu.com/1081450/ [16:59] help3333: they'll have access to all the stored passwords and so forth, its not advised or supported [16:59] falstaf: that is odd. Can you please do an ls -lR /lib/firmware ? [16:59] help3333: if you want a root shell where you have full access, run: sudo -i [16:59] i care to be hacked [16:59] hi .. I am trying to join #haskell ,, but it shows only one person in that channel, any solution? [16:59] Well, thank you to all you sexy computer nerds that tried to help me. I'll just play around, Maybe I'll come back if I still can't get it. [16:59] if you don't mind.. my choice [16:59] help3333: its not supported here, not my choice. channel policy [17:00] help3333: so yes, i mind [17:00] it is odd, isn't it, it's as if it's looking in the wrong place for the firmware. [17:00] Anybody facing similar problem in joining #haskell or any other channel [17:02] help3333, pm me [17:03] so can anyone else help me? [17:04] Macuser: i'm sorry, what was your issue now again? [17:05] I installed ubuntu 12.04 for a dual boot with windows vista and now every time i reboot or start my computer it automatically boots ubuntu and i need to boot vista! so how do i get my boot menu back [17:05] hmm...I'm using imagemagick to merge some images, and I'm getting "error: maximum supported resolution is 65500 pixels". I'm certain I was able to create much bigger images with the windows version though... [17:05] Macuser: if you run: sudo update-grub do you see windows listed? [17:05] Macuser: okay, so you're not even given the choice to boot? i notice your nickname, is this a standard PC where you're running vista and ubuntu, or are you trying to run it all on a mac? [17:05] samster34: maybe the windows version is compiled different [17:06] pv2b, falstaf , you may need to install b43-fwcutter for leagacy firmware [17:06] Macuser, when you reboot, hold down right shift before ubuntu boots, should be the grub menu, go down to recovery menu.. [17:06] BluesKaj: he already has. [17:06] samster34: have you tried in #imagemagick [17:06] pv2b, ok [17:06] BluesKaj: but for some reason teh driver isn't piiccking it up [17:06] ActionParsnip: there is such a channel? heh [17:06] ActionParsnip: yes [17:06] Macuser, then chose grub update [17:06] Macuser: if you hold SHIFT at boot, do you see the windows option? [17:06] oh i will try one sec [17:07] samster34: yes, try it. It's free to try [17:07] ActionParsnip, is it grub update in recovery mode? its something like that. [17:07] digitalghost: you can run it in root recovery, yes. You can even run it in a chroot :) [17:07] well it said grub loading and then i let go and it stopped should i try again but hold it the whole time ActionParsnip? [17:08] Macuser: yes hold it down til grub shows [17:08] ok [17:08] nm, solved(50%). [17:08] http://paste.ubuntu.com/1081480/ [17:08] well i tried and it says grub loading and then it starts to boot ubuntu. [17:08] :( [17:08] Macuser, if windows is not on the list to boot pick recovery [17:08] well it doesn't give me a list digitalghost [17:09] it just says loading GRUB.. and then starts my ubuntu boot [17:09] ActionParsnip, ok now you can walk him how to do the grub update in chroot. :) [17:09] falstaf, what does , wlist wlan0 scan , output ? [17:09] i knew this had to do something with chroot [17:09] digitalghost: http://www.omgubuntu.co.uk/2011/09/live-usb-sticking-grub-2-video why bother [17:10] falstaf: ls: cannot open directory /lib/firmware/b43legacy: Permission denied --- that's very odd. [17:10] falstaf: that's exactly the spot i wanted to look. [17:10] I've just plugged my electric guitar to my PC. is there any good program to modify the sound? [17:10] ActionParsnip, ahh.. good point..if Macuser seen that message. [17:10] falstaf: ls -ald /lib/firmware/b43legacy please [17:10] yes i did [17:10] zing [17:11] is it possible there are too many drivers installed b43 and b43 legacy b43 ssb [17:11] falstaf: not really, as long as it's picking the right one [17:11] falstaf: which we're doing using modprobe [17:11] falstaf: just them sitting on the hard drive won't harm you as long as we're just trying to determine a working driver manually, once we have a dirver working it might be neccessary to blacklist the incorrect drivers [17:12] pv2b: Are you doing that as root? [17:12] ill bet not [17:12] bekks: he wasn't doing it as root. but still, that folder should still be user-accessible. [17:12] Normally, I user should have no access to device firmware at all. [17:13] it's just a file on the disk. most of the stuff is readable. but i still find it odd that even with modprobe b43legacy that it's looking in the b43 fodler for the correct firmware [17:14] ActionParsnip: well, seems there's nobody in there :) [17:14] pv2b: Because both drivers are using the same firmware. [17:14] http://paste.ubuntu.com/1081489/ [17:14] can you help fix this ? :- http://s11.postimage.org/fpxxb976b/Screenshot_from_2012_07_08_22_40_52.png [17:14] falstaf: i notice you're taking a while to respond with pastes, is it because you're having to switch between computers or something? [17:15] i'm only asking to see if we can streamline this so we can get somewhere quicker :) [17:15] No it is a slow computer --- and a slow operator [17:15] falstaf: fair enough [17:15] falstaf: can you do another output of lsmod? as it is in this current state. [17:16] hey digitalghost you still there? [17:16] i need help on one step [17:16] yes [17:16] Macuser, om [17:16] ok [17:17] um so i am root now and i need to do grub-install /dev/sda? is that right? [17:17] if that is the right device [17:17] how do i know [17:17] did you chroot /dev/sda1 [17:17] http://paste.ubuntu.com/1081496/ [17:17] how do I install a GPG key for a 3rd party repo that I've put in sources.list.d? [17:17] no i did sudo chroot /mnt [17:18] falstaf: oh, you still have the b43 driver loaded [17:18] falstaf: we need to unload tha [17:18] i think that's how i got to root [17:18] falstaf: sudo modprobe -r b43 && sudo modprobe b43legacy [17:18] Macuser, first do sudo fdisk -l and see what device are there [17:18] yes and i want the divice that says Linux [17:18] so i would do grub-install /dev/sda(what ever number is for linux) digitalghost [17:19] or would i do just sda? digitalghost [17:19] Macuser, then do sudo chroot /dev/sda1 or what ever the device you need to install it to. [17:19] !grub2 [17:19] GRUB2 is the default Ubuntu boot manager since 9.10 (Karmic). Lost GRUB after installing Windows? See https://help.ubuntu.com/community/RestoreGrub - For more information and troubleshooting for GRUB2 please refer to https://help.ubuntu.com/community/Grub2 - See !grub1 for releases before Karmic (9.10) [17:19] i'm not sure what i need to install it to [17:19] I am not enable to update my ubuntu 12.04 [17:19] done [17:19] in end it give me error not found [17:19] falstaf: great. is it working better now? if not, please post your dmesg again. [17:19] what if i do sda? [17:19] "You have queued an operation to move the start sector of partition/ dev/sda2. Failure to boot is likely to occur if you move the GNU/Linux partition containing /boot" [17:20] i have / and /home, that was / [17:20] falstaf: also, did you get any error messages running that command? [17:20] am i affected? [17:20] ActionParsnip, can you help Macuser with this? [17:20] i'm testing a script to see if its running, I need to add a line to the script so it will make a entry in a log file, what would the line be? [17:20] no errors [17:20] digitalghost: that link is all I know [17:20] http://paste.ubuntu.com/1081503/ [17:20] plz look forward my problem [17:20] falstaf: okay, let's see a dmesg then :) [17:21] hm we'll im not sure what to do grub-install/dev/sd(i dont know) [17:21] Macuser, i dont wont to lead you wrong, im trying to find out where you need to do what, havent done it in a long while [17:21] all i know is sda1 is my main system [17:21] sda5 is linux [17:21] and the tutorial says do sda [17:21] i have a program that caches files to a locked folder and it keeps filling that folder with trash.. how to i make a shortcut on the desktop to delete the files inside the folder whenever i click on it [17:22] i "think" you would do it to sda5 [17:22] plz help me [17:22] but the tutorial says sda [17:22] Hi, I've recently installed Ubuntu 12.04, after the installation complete it restarted but booted straight intno Windows. [17:22] ok im gonna do sda [17:23] digitalghostlike the tutorial [17:23] RanNum, it sounds like Grub did not install correctly. [17:23] Macuser, ok. [17:23] yea it tried to install to /dev/sdab when all of my disk is on /dev/sda [17:23] help me plzzz [17:24] is ubuntu a Debian Linux system? [17:24] hey digitalghost for some reason it won't let me unmount. [17:24] khan, just ask your question [17:24] You can boot from the usb or cd, then install boot-repair...it will fix it for you. [17:24] Is there a way to manually configure grub? [17:24] casey: ubuntu is based on debian, in so far that it uses the same package manager. but the repositories are different [17:24] yes I can boot from usb/cd I'm actually looking at a terminal now. I will try boot repair is that a 3rd party program? [17:24] i use sudo apt-get update ..updaing but in and it said failed to fetch archive not found [17:24] i'm rebooting [17:25] Casey: it is based on the debian source originally, but it's different. [17:25] here is error http://paste.ubuntu.com/1081503/ [17:25] http://paste.ubuntu.com/1081508/ [17:25] Casey if ubuntu were the same as debian, it would be called debian [17:25] and it didn't work digitalghost [17:25] what is the best way to install these: linux-image-virtual linux-virtual [17:25] well hold on [17:25] i will try the right shift thing again [17:25] Macuser, ok [17:25] dist-upgrade or just specify them individually? [17:25] i'm testing a script to see if its running, I need to add a line to the script so it will make a entry in a log file, what would the line be? [17:25] is that how you get grub? [17:25] figured out a way cut and paste a little faster! [17:26] jtrucks: You mean packages from another distro release? [17:26] Google Ubuntu boot-repair...it will tell you how to install it. I think it is in the repos, but it might be in universe or multiverse. [17:26] khan it's a PPA, not supported here [17:26] nope doesn't work [17:26] bekks: no, they are held back when I do an apt-get upgrade. [17:26] so I presume it's being cautious for me. (it's a VPS on Xen, so it needs the virtual optimized kernels) [17:26] Casey: use logger [17:26] how to remove those ppa? [17:26] khan: http://ppa.launchpad.net/tldm217/tahutek.net/ubuntu/dists/ that ppa doesn't support precise, I suggest you remove it [17:26] didn't realize that terminal had a select all command. [17:27] which not found how to remove? [17:27] ok how do i get to thw logger [17:27] khan: use software centre [17:27] i dont using software center.from command how to remove? [17:28] khan: you can delete the file from /etc/apt/sources.list.d which is named something containing tahutek [17:28] khan type !ppa-purge to find out [17:28] ok [17:28] MonkeyDust: not a bad call [17:28] jtrucks: you can do either (apt-get dist-upgrade; or apt-get install linux-image-virtual linux-virtual;) the second is mostly if you have other upgrades that you don't currently want to install [17:29] Casey: read the man page for 'logger' it's a command that logs for you [17:29] khan: sudo apt-get install ppa-purge; sudo ppa-purge ppa:tldm217/tahutek.net [17:29] khan, alt +f2 , gksudo gedit /etc/apt/sources list and comment the deb launchpad ppas with # in front , if you have upgarded your OS , then these ppas are nolonger valid for your ubuntu version ,then save thew file and update again [17:29] khan: either is fine [17:29] falstaf: oh! didn't notice you pasted. let's take a look. [17:29] trism: cool, thanks for verifying that [17:30] khan or you can also delete the deb entries if you wish [17:30] Hi! [17:31] digitalghost now ubuntu won't even boot... [17:31] falstaf: okay, seems the driver is loaded! have you tried to see if it'll actually work? [17:31] Is there a way to crossfading in Banshee? [17:31] if i remove ppa it will remove my tool also which i dont from that ppa [17:31] ? [17:31] is there any command to force the kill of a process? [17:31] BlouBlou: kill -9 [17:32] it won't remove the tool if it's already installed , khan [17:32] i am using apt-fat install toolname? [17:32] apt-fast is ok? [17:32] pv2b: doesn't work, system monitor also says that cannot be interrumped [17:32] never use apt-fast [17:32] used [17:32] khan: no, just the ppa [17:33] I'm trying to fill out a bug report for a null pointer issue in Ubuntu 12.10/kernel 3.5 but when I try to do ""sudo lspci -vvnn > sudo_lspci-vvnn.log" the terminal just hangs and hangs with just "sudo". Any ideas? [17:33] is there a scan avialable on cl -- I am still getting no wireless found msg. [17:33] BluesKaj: apt-fast is sweet [17:33] . [17:33] lehjr: most likely it's waiting for your password in sudo. [17:33] lehjr: Quantal in #ubuntu+1 please [17:33] I just purchased a small Phillips PicoPix. I connects to the computer with two USB-cables and it gets electricity from the computer. But Ubuntu can not see it as a projector, just as a USB-device- Does anyone know if it is possible to use it on Ubuntu? Have googled, but haven't found any answers [17:33] what's so sweet about it ActionParsnip ? [17:33] khan: apt-fast is great, its not complex either [17:33] n [17:33] BluesKaj: its apt-get plus axel [17:33] lehjr: do something like "sudo ls" to make sure your session is cached, then try it again. [17:33] BluesKaj: downloads packages from 3 sources rather than one [17:34] i install apt-fast but i cant see any diffrence [17:34] thanks [17:34] khan: use apt-fast instead of apt-get in CLI [17:34] i use apt-get in cli [17:34] apt-get is fast [17:35] khan: apt-fast is like what torrents are to http downloading [17:35] !info apt-fast [17:35] Package apt-fast does not exist in precise [17:35] how to increase download speed? [17:35] khan: single source (http) or torrents (multiple sources) [17:35] !info axel [17:35] axel (source: axel): light download accelerator - console version. In component universe, is optional. Version 2.4-1 (precise), package size 50 kB, installed size 216 kB [17:35] khan: BY ordering a faster connection at your ISP. [17:35] when running rkhunter, I get a warning for /usr/sbin/cron (under performing file properties checks). Is this something I need to worry about? Anyone know of a good guide on how to properly understand rkhunter and chkrootkit? [17:36] BluesKaj: its not official, but very worth it. You can just grab the script file (you don't need the ppa, it just adds niceness to bash-completion) [17:36] GeekAdmin: what warning is that? [17:36] is it possible to get my new mini-projector from Phillips (PicoPix) to be recognised as it is and no as a usb-device? [17:36] yes i did [17:36] Hello, I can no longer connect to my account :( When I type my password, the session start, then "it" fails (maybe Xorg) and return to the login screen :( [17:37] odsel: it doesnt say anything really. other than "performing file properties checks" [17:37] khan: you'll need to remove the PPA if you want smooth updates [17:37] odsel: I'm also getting a warning for /usr/bin/unhide.rb [17:37] Does Ubuntu have some sort of repair install? [17:38] Pomme, try to log in in console-mode (CTRL-ALT-F3) [17:38] do yo think a reboot might help? [17:38] Where I can basically totally reinstall ubuntu without having to backup files? [17:38] It works in console mode [17:38] GeekAdmin: why do you not have a backup? [17:38] Romme [17:38] embrik: I used it to create another account [17:39] Pomme, Maybe Home is full [17:39] GeekAdmin you can use ubuntu one for an online copy, it's what i have [17:39] falstaf, got the wifi connected ? [17:39] Pomme: do you have free space on all partitons [17:39] ActionParsnip: I do actually. Its A LOT of files though and would take forever to add back to drive [17:39] GeekAdmin: if you put your /etc and /home in a seperate partition, you probably dont need to backup [17:39] GeekAdmin: what if your drive fails, where is your data? [17:39] odsel: oh! good idea thanks [17:39] GeekAdmin and it's easier if you have a separat /home partition [17:39] GeekAdmin: or just run a more frequent backup.... [17:39] GeekAdmin: just dont mount them when you do the fresh install [17:39] Yes... I mean "I have a lot of free space, but how could I check ?" [17:39] ActionParsnip: I have my data on 2 different hard drives. External and internal. Then I have my most important files ALSO on my web host server [17:39] Pomme: df -h [17:39] Pomme, df -h [17:39] you probably need backups no matter how you're partitioning :P [17:40] odsel: k thanks! [17:40] BluesKaj, I isn't finding wireless networks. [17:40] Max is 34%, so OK, thanks [17:40] GeekAdmin: sounds like you won't lose anything then, reinstall away [17:41] we'll any other ideas of how i can get vista to run or get boot menu to show? [17:41] falstaf: i'm afraid i have to go for now. i hope somebody in the channel can help you. at least now we have the b43legacy driver running with the firmware correctly installed, so that's something. [17:41] falstaf: as a final advice, you might want to try to reboot - in case an earlier driver put the card in an inconsistent state. [17:41] Macuser: could reinstate the vista bootloader, then use the chroot to renstall grub, may help [17:42] and blacklist the b43 driver and any other drivers like wl, bcm43xx or brcmsmac [17:42] pv2b, Thankd for all your help!! I learned a lot! [17:42] good luck, and i hope you manage to get it up [17:42] hello [17:42] and how would i do that? by the way the video tutorial you sent made my ubuntu not work so i had to do some mounting to get it back === HaVoK is now known as EbonHeart [17:42] I will [17:42] ActionParnsip [17:42] ActionParsnip * [17:43] Macuser: use the vista cd and you can put the windows loader back on, then he videomay help [17:43] hello [17:43] but i my windows loader is on [17:43] Macuser: the commands are a little off the, the #-bind' should be '--bind' [17:43] I am new to ubuntu. In the process of setting up ubuntu server 12. 04 === EbonHeart is now known as HavoK [17:44] Hello, I can no longer connect to my account :( When I type my password, the session start, then "it" fails (maybe Xorg) and return to the login screen :( [17:44] falstaf, sudo ifconfig wlan0 up , then, sudo iwlist wlan0 scan|grep -i essid [17:44] i setup my eth0 to static (pinged google server: OK) during my apt-get update i get error [17:44] Comadrin: if you are new to the OS I suges you install the desktop OS. It will hold your hand a lot more [17:44] http://codepad.org/QwWkKMuV -- this is my /etc/apt/sources.list [17:44] Hi guys, I'm Mint user, yet after testing for over 4 hours Ubuntu Studio I decided to give it a go as my home/project studio solution. Anybody care to answer couple of jack/midi/hardware related questions? [17:45] join #ubuntu === HavoK is now known as ebonheart [17:45] Comadrin: ahh, try: echo "nameserver 8.8.8.8" | sudo tee /etc/resolv.conf then try again === ebonheart is now known as EbonHeart [17:45] i searched everywhere on the net but could not figure out why it does not work [17:45] so what should i do now ActionParsnip? [17:45] Macuser: thats all I can suggest. I don't dual boot [17:46] i will try that right now [17:46] i will read why i need to use nameserver 8.8.8.8 [17:46] hey guys, I just added a new user to my server, but it has a dumb $ sign when Im typing. how can I have joe@localhost:~# like root does? [17:46] at teh current time my nameserver is set as the DNS nameserver of my ISP [17:46] *the [17:47] Comadrin: could be the issue, both are worth exploring [17:47] damm , too late ...missed him , and I'm sure those commands would have worked [17:47] any ideas if I can resize root dir while being on ubuntu itself ? as gparted doesn't let me do that [17:47] glosoli: you'll need the liveCD [17:47] glosoli: open using the cd [17:48] i am trying this right now. I am new to this so I am int he process of figuring out how it all works ;-) thank you very much for your assistance and attention in this matter [17:48] Comadrin: any time [17:48] hey guys, I just added a new user Joeto my server, but it has a dumb $ sign when Im typing. how can Joe have joe@localhost:~# like root does? [17:48] ActionParsnip, yakko thanks [17:48] Ubuntu forced a EFI grub loader on my computer that doesn't support EFI. I think this should be flagged as a bug for Ubuntu developers [17:49] RandNum: then report a bug [17:49] Hi again I need some jack/midi/audio related questions. Anybody care to answer? [17:49] answers* [17:49] !ask | pogarda [17:49] pogarda: Please don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience [17:49] pogarda: Not without knowing the question. [17:50] fact grub-common is not the same as grub-pc haha. :) so glad boot-repair is fixing my problem [17:51] bekks, i have Yamaha DGX-620 wich i used to use as midi controler. In mint it was seen by defoult and had no problem in using it. Now in Ubuntu studio i cant see it at all. How can i set it? Bear in mid im complete noob :D [17:52] interesting, if you're ever not sure which drive to install grub to you can just install it to all of them. [17:52] how do I see filesystems that are not mounted? (I am booted from an USB and want to mount my filesystem I already have) [17:52] Mech0z: use in what way? [17:53] Mech0z: sudo blkid -g; sudo blkid; [17:53] what do i do if a printer (that has worked with ubuntu installations in the past) simply doesn't respond to print commands from linux? [17:53] Mech0z: to just mount them they should shown in nautilus [17:53] how do i debug this thing? [17:54] hu: what printer? [17:54] ActionParsnip: hp laserjet 1020 [17:54] hu: how does it connect to the system? [17:54] ActionParsnip: usb [17:54] hu: what is the output of: lsb_release -sc [17:54] irc://freenode/ActionParsnip,isnick i just figured out what i needed to change and you were instrumental to it [17:55] ActionParsnip: katya [17:55] ActionParsnip where should they be at? [17:55] Comadrin: as long as you get the gold it's fine :) [17:55] hu: mint isn't supported here [17:55] !mint | hu [17:55] hu: Linux Mint is not a supported derivative of Ubuntu. Please seek support in #linuxmint-help on irc.spotchat.org [17:55] ActionParsnip: i went into: vi /etc/network/interfaces and added the following line: dns-nameservers 8.8.8.8 8.8.4.4 [17:55] and it worked like a charm [17:55] i figured there would be no relevant differences? [17:56] again thank you very much sir [17:56] or madam ;-) [17:56] Comadrin: hehe nice :). Sometimes after updates it fixes things [17:56] hu: There are plenty of differences, e.g. Mint-specific packages. [17:56] hu: there are, which is why they have their own support channels which are seperate to ubuntu's [17:56] hu: none of the ubuntu based distros are supported here [17:59] hi all, I have 3.2.0-26 kernel installed (after upgrade of 12.04) and now the nouveau driver seems to want to load all the time but I would like the NVIDIA driver. How can I disable that nouveau driver ? I tried with blacklist but that does not seem to have any effect [17:59] u19809: do you have the proprietary driver installed? [17:59] yes when installing it tells me the driver is loaded (and it is at boot) [18:00] ActionParsnip when I sit in the nautilus I cant see my 2 ext4 partitions, ishould I search a special place? [18:00] Mech0z: they should just show. Do they show in: sudo fdisk -l [18:00] is something wrong with the ubuntu updater today? it keeps giving me an error 'failed to download package files, check your internet connection.' and it cancels the entire update every time. [18:00] ActionParsnip, i thought the dns nameservers were supposed to be listed in /etc/resolvconf/resolv.conf.d/head [18:00] my internet connection is fine, obviously as everything else is working flawlessly. [18:01] Mech0z: sudo blkid -g; sudo blkid; [18:01] ActionParsnip the disks do [18:01] Mech0z: do the partitions show too? [18:01] BluesKaj: if it works :) [18:02] in the interfaces file as well , ActionParsnip ? [18:02] would be simpler alright [18:03] does canonical have any official stance towards projects like mint? [18:04] !ot | hu [18:04] hu: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics (though our !guidelines apply there too). Thanks! [18:05] hu: its not supported here, mint has it's own support. You aren't using ubuntu so your distro is offtopic here [18:05] hello [18:05] hello [18:06] I have Yamaha DGX-620 witch i used to use as midi controller. In mint it was seen by default and had no problem in using it. Now in Ubuntu studio i cant see it at all. How can i set it? Bear in mid I'm complete noob :D [18:06] !rootirc | root_ [18:06] root_: It's not technically our business, but we'd like to tell you that IRC'ing as root is a Very Bad Idea (tm). After all, doing anything as root when root is not needed is bad, and especially bad with software that connects to the Internet. [18:06] is there any good tutorial on how to integrate my own app into the unity global menu? [18:06] c++/gtk [18:07] D[4]ni: might ask in #ubuntu-app-devel [18:07] D[4]ni: if you make a .desktop in /usr/share/applications it will appear in the dash, if that's what you mean? [18:07] oh, I didn't catch that :/ [18:07] ActionParsnip: no, global menu, the menu you get in the top panel [18:08] pogarda: Looking around does not yeild particularly positive results for that specific kb with ubuntu studio. I see one person who says that they "can" use the two together, and implies he does... but it does not specifically say that he does. [18:08] D[4]ni: ahhhh I se [18:08] D[4]ni: the channel IdleOne mentioned sounds ideal then ;) [18:09] !info rosegarden | you might check this out. It may or may not be a useless venture pogarda [18:09] you might check this out. It may or may not be a useless venture pogarda: rosegarden (source: rosegarden): music editor and MIDI/audio sequencer. In component universe, is extra. Version 1:11.11.42-1ubuntu1 (precise), package size 8123 kB, installed size 13078 kB [18:10] Hey can I have Unity, Gnome and kde interface to choose on Ubuntu 12.04 ? === zz_seejy is now known as zz_zz_seejy [18:10] Like we can choose from Gnome and Unity before we log in [18:10] dak0: sure, just install them all and choose at login [18:11] ActionParsnip thank you man [18:11] dak0: unity is a shell for gnome, so you already have gnome [18:11] VirtualBlackness, ubottu, probem i have it that all midi/audio software i used to use under mint was able to see the KB while under UbuntuStudio none of them does. I'm sure it can be set up tho im 2 stupid/unexperienced to do it myself [18:11] Yes I have gnome and unity just wanted to know can I add kde to that list :) [18:11] trying to restore all databases from a single .sql file using mysqldump but it says [18:11] Wow Ubuntu is really amazing. [18:11] mysql: unknown option '--all-databases' [18:11] when running initramfs I get error : Could not load /lib/modules/3.2.0-26/modules.dep: No such file or directory [18:11] Any ideas? [18:12] dak0: sure, on the login screen you will see an ubuntu logo near your name, click it and choose the desktop you want [18:12] Wait... sorry for all the questions about this, but Ubuntu should run better than Mac OS X 10.5, right? [18:12] dak0: fairly standard across all Linuxes :) [18:12] Ariii: depends on config [18:12] ActionParsnip: Of OS X or [18:12] ActionParsnip: What's the lightest kde interface ? [18:12] Ubuntu? [18:12] Ariii: both [18:12] taeb [18:12] tabe [18:13] dak0: kde is kde [18:13] Oh.... then how about the default configuration of each? [18:13] dak0: you can turn of the kwin effects and get a snappier UI [18:13] pogarda: /join #ubuntustudio you are much more likely to get a good answer there... though I do not know how quickly [18:13] ActionParsnip: Hmm I have heard about xkde or something like that, they say like that's lighter [18:13] Ariii: i've not used mac that extensively so couldn't say. I'd imagine so. If you use Lubuntu then it will definitely be faster [18:13] dak0: XFCE [18:14] dak0: if you can install it, you can use it ;) [18:14] ActionParsnip, Chad__ thanks [18:15] Let's say I install XFCE ubuntu will continue update and all those things normaly? [18:15] VirtualBlackness, thx, tho im already on that channel [18:15] I need help setting up an Adhoc network with ubuntu 10.10 [18:15] when i try to create a new wireless network it asks me for the information [18:16] c4pt-otc: maverick is EOL [18:16] trying to mysqldump and getting mysql: unknown option '--all-databases' [18:16] any ideas? [18:16] when i open a terminal or application it open out of window so i cant not minize or miaximize or even move [18:16] i guess no one can answer me or i'm just plain invisible [18:17] Lazure: or your question does not have usefull details [18:17] all application opening with hidden window borders [18:17] i'm pretty sure what i said was clear enough. [18:17] Lazure: The answer is "no". [18:17] i make both user accounts *Standard* by mistake. now what to do? [18:17] *made [18:18] akhileekhs: have you touched compiz configuration ? [18:18] someone please. I'm in a real pickle [18:18] no i did not install it [18:18] i dont have compiz [18:18] my server got hacked. I've got all the DBs backed up in 1 file [18:18] and it's too big to do through phpmyadmin [18:18] I'm trying to mysqldump it after scp'ing the .sql file [18:18] @afd what kernal your server had? [18:18] and am getting this mysql: unknown option '--all-databases' [18:19] I'm running stock ubuntu 12.04 32bit [18:19] afd: when mysqldump tells you "--all-databases" is an unknown option, then you can believe in that. [18:19] just wondering why ubuntu is failing to download packages with a 'check your internet connection' in the auto-update. my internet connection is clearly fine. [18:19] chek your server i am preety sure hacker uploaded a webshell and also backdoor for furthre accesss [18:19] your website name? [18:19] bekks: all the walkthroughs on how to import the file use that term [18:19] akhileekhs: the server is a new one since the hack [18:20] had to nuke the old one [18:20] Lazure: This is generally due to sources.list or more likely PPAs installed on the system. [18:20] afd: Which doesnt mean your installed mysqldump version supports that argument. [18:20] website is hosted on it? [18:20] linode [18:21] Hey do you guys know any free Ubuntu e-/books [18:22] !guide [18:22] The Ubuntu server guide may be found at http://help.ubuntu.com/10.04/serverguide/C/ [18:22] !manual [18:22] The Ubuntu Manual will help you become familiar with everyday tasks such as surfing the web, listening to music and scanning documents. With an emphasis on easy to follow instructions, it is suitable for all levels of experience. http://ubuntu-manual.org/ [18:22] bekks: any idea how to upgrade mysqldump? [18:22] hey guys [18:22] afd: try sudo apt-get upgrade [18:23] i hav a python question [18:23] squid: yeah, didn't work [18:23] afd: "didnt work" means what exactly? [18:23] afd, what version of ubuntu are you on? [18:23] rihen: #python [18:23] rihen: go for it [18:24] bekks: I ran sudo apt-get upgrade mysqldump and it said there was no upgrade available [18:24] VirtualBlackness: I'm running stock 12.04 headless 32bit [18:24] afd: why don't u go the website and download the latest tar [18:24] hi guys. Anyone knows which is the best caldav, carddav soft which intergrates with thunerbird lightning and iPhone ? [18:25] afd: There is no package named "mysqldump" so that command cant be working at all. [18:25] firstly afd, mysqldump is not a package. [18:25] Hi, should it be any difference to mount nfs in /etc/fstab and mount using the mount.nfs command? [18:25] afd: isn't mysqldump part of mysql admin tools? [18:25] squid: I just tried running the mysqldump without the -u and -p defined and it said it did it "Dump Completed" but it doesn't create the DBs [18:25] afd: You are doing something wrong, since the stock mysqldump in 12.04 supports --all-databases. [18:25] apprently i had to hit 'check' button again, it had an outdated list of updates, probably cuz i hadn't used the system in awhile. [18:26] using fstab makes boot time very, very LONG [18:26] afd: So whats the complete command you are issueing and whats the complete output? Use a pastebin to provide it please. [18:26] VirtualBlackness: Can I ask straight up instead then - please tell me what I can do. I have the .sql on the server and it holds all the info it just needs to be run. I have mysql installed [18:26] afd: I just told you what to do. [18:26] However that argument should be supported if you are on 1204, please... yes follow bekks request. [18:27] afd: can you share with us how you trying the mysqldump? [18:27] afd: should be like this "mysqldump -u root -p[root_password] [database_name] > dumpfilename.sql" [18:27] mysqldump -u root -p thepassword --all-databases < /home/afd/localhost.sql [18:28] hello, I have to run Tomcat, Java, Maven, Eclipse and Subversion for my freelance work [18:28] afd that < should be > [18:28] is there any equalizer for ubuntu? I want to modify input sound (electric guitar) [18:28] afd: The following options may be given as the first argument: [18:28] afd: -A, --all-databases Dump all the databases. [18:28] Is it recommended to do it on Ubuntu ? [18:28] oh you are trying to restore afd... sorry [18:28] afd: Thats what mysqldump says. [18:28] or should I use Windows :) [18:29] I got my dual boot Windows 7/Ubuntu 12.04 computer to work with non EFI enabled hardware after many problems. I'm now an expert on installation so ask me any question. [18:29] afd: So it has to be something like mysqldump -A -uroot -p.... [18:29] afd: try it [18:29] bekks: so I ran, mysqldump -A -uroot -pthepassword --all-databases < /home/afd/localhost.sql [18:30] WRONG. [18:30] bekks: "So it has to be something like mysqldump -A -uroot -p...." [18:30] -A is the same as --all-databases. So use -A as the FIRST argument and OMIT the "--all-databases". [18:30] afd: the -A replaces the --alldatabases I believe [18:30] bekks: ok [18:30] I get you [18:30] and it didn't work [18:31] I get the "OR mysqldump [OPTIONS] --all-databases [OPTIONS]" message [18:31] I ran [18:31] afd: Nopaste the complete output including your command in a pastebin. [18:31] my window border and mximize and minime dissapear [18:31] mysqldump -A -uroot -pthepassword /home/afd/localhost.sql [18:31] afd: are you using sudo in front of this command? === aaron is now known as aaronrules [18:31] !paste > afd [18:31] afd, please see my private message === tavasti` is now known as tavasti [18:32] when i type in termina compiz-decorator --replace then everythin come back to normal but when i cosr terminal everythin lost [18:32] squid: not using sudo [18:32] but tried then and same result [18:32] squid: You dont have to be root to do so. [18:32] I can open up mysql in the cli [18:32] afd: let me do some research [18:32] can I just run the .sql from in there? [18:33] thanks for the help guys [18:33] afd: What about the information I requested two times already? [18:33] bekks: afd may need to create the databases before their data can be restored... but this is a faint memory. I do hate databases so... [18:33] plzz help mee [18:33] VirtualBlackness: Thats not true ;) since --all-databases exports the create DDL too. [18:34] just throwing it out there... now I know bekks [18:35] bekks: sorry my head is spinning... you want the full output? [18:35] afd: As I asled you for two times, yes. [18:36] *asked [18:36] afd: the error or output might help us [18:36] the only times it does anything it runs the sql import in full [18:36] I'm not pasting my whole sql file for the world to see [18:36] and the errors I have pasted in here [18:36] lol [18:36] afd: I dont want the sql file. [18:36] afd: I want the FULL, DETAILED, COMPLETE error messages you are talking about. [18:37] And the exact command which leads to a distinct error message. [18:37] ola [18:38] afd: we just want to see the exact error...that should not include your secret data... [18:38] sure - I'm just pastebining now [18:38] Is there channel for linux gamers? [18:38] with all the various methods I've tried [18:38] plz some bod help me [18:38] in gnome classic i hav no window boarder [18:39] hi there. I have a Microsoft Wireless Desktop 800 (wireless keyboard+mouse with one single tranceiver). when I boot up the system, however, neither mouse, nor keyboard work. I have to unplug the tranceiver and plug it back in, then it works fine. but that cannot be the final solution [18:39] http://pastebin.com/PC1uU1TA [18:39] according to dmesg the device is detected on bootup but it wont work until I plug it out and back in [18:39] I can try running other varients and pasting the output [18:39] @afd you have website hosted? [18:40] afd: I am out of your ticket, sorry. I cant help you when you are not providing the information requested. [18:40] bekks: I'm actually trying to give you whatever you want [18:41] afd: hold on [18:42] afd: try it like this ===> EXACTLY! [18:42] hello. When I formatted my portable hard disk, I forgot to make it bootable. How to repair my mistake ? I am on Ubuntu 12.04LTS. Thank you [18:42] afd scan your server..i am sure hacker install php shell [18:43] afd scan server [18:43] akhileeks: That wont help him restore his database. [18:43] giulia27, by bootable do you mean it's not mounted ? [18:43] akhileeks: I understand your concerns that why this is a fully fresh install with only mysql and phpmyadmin installed so far [18:43] i am penetration tester i know better what hacker could do [18:44] akhileeks: He already set up a new server... [18:44] afd what website u have? [18:44] BluesKaj, itmeans that when I plug inside the USB drie, it does not do anything [18:44] it fine,he have website? [18:44] akhileeks: unless one of those have been compromised I'm certain only I have access to this server (unless I've got a fucking keylogger on something on my laptop) [18:44] hosted in his server [18:44] afd: mysqldump -u root -p -A < /tmp/all-database.sql [18:44] there not much keylogger for linux [18:44] afd: try leaving space between -p and -u [18:45] he install php shell which give access to server [18:45] afd: your error seems like a syntax issue [18:45] if you have website hosted,then i am sure hacker will gain access again [18:45] beause vulnablirty maybe exits in your website [18:46] giulia27, is the drive listed in nautilus ? [18:46] BluesKaj , maybe she`s wiped out the whole disk .... [18:46] BluesKaj, no, and this is the problem [18:46] giulia27: How did you "format" the drive? [18:47] by gparted [18:47] making a bootable disk is to write on zero sector the image starting sequence for the OS . [18:47] ok [18:47] but it is more like a usb key who does not want to launch [18:48] afd: it works for me [18:48] giulia27: which os is on the usb disk ? [18:48] giulia27: So you created a partition on this disk, I presume. What filesystem does this partition contain? [18:49] squid: thanks for helping... it looked like it ran and even said "Dump Completed" at the end [18:49] but no joy :( [18:49] if the disk is recognized by windows and not by ubuntu, maybe the gparted marked it as an other type of disk [18:49] afd: Awesome!!!! [18:49] phpmyadmin still shows only the default DBs [18:49] giulia27: try to mount the disk and chroot to it [18:49] Jordan_U: fat32 [18:49] hey [18:49] giulia27: And just so you are aware, this has nothing to do with being "bootable". [18:49] afd: Log out, log back in into phpmyadmin. [18:49] afd: I had to install mysql and try it myself [18:49] how can I use desktop magnifier in gnome shell 3?? [18:49] giulia27: then you can do sudo update-grub [18:49] bekks: just tried that. still nothing. trying to flush my browser cache as well === zz_diddledan is now known as diddledan [18:50] afd: Restart the mysql server. [18:50] bekks: ok :) [18:50] how can I use desktop magnifier in gnome shell 3?? [18:50] afd: bekks has a good sugestion [18:50] giulia27: Can you pastebin the output of "sudo parted -l" while the drive is plugged in? [18:51] streulma: here is the pastebin for sudo update-grub : http://pastebin.com/vKVRF2xi [18:51] streulma, there's no OS on the disk [18:51] Jordan_U: hold on, I run the command [18:51] tify sublimed [18:52] how can I use desktop magnifier in gnome shell 3?? [18:52] prof congreg [18:52] Jordan_U: here is the pastebin http://pastebin.com/8vddyErT [18:52] Hi ! ANyone can recommend me a tool for OS modifications management ? We are several uses with root access on the same machine, and we want to be able to know which one has do which commands.. svn ? other ? [18:52] thanks ! [18:53] action09: I have no idea, sorry :( [18:53] for most of you...there is something really awesome out there that works very well with most Ubuntu related issues... [18:53] alguien sabe donde tengo que copiar este paquete de iconos para que me funcione es "Alienware_BREED_Icons_All_Colors.tar.gz" ya lo copie en usr/share/icons y nada no puedo hacerlo funcionar [18:53] it's called MAN pages, Ubuntu documentation and Google [18:53] :D [18:54] giulia27 no problem :) === VirtualBlackness is now known as L3top [18:54] ariesam...tar xvf Alienware_BREED_Icons_All_Colors.tar.gz, then try again amigo [18:54] giulia27: OK, your external drive is clearly not listed there at all at the moment. Do any other USB drives that you have show up in Nautilus when you plug them in? [18:55] squid: oh ok... [18:55] Jordan_U: no [18:56] i want my login screen in text mode [18:56] how i can do that [18:56] but I haven't tried with another usb drive [18:56] squid: still nothing after the restart :S [18:56] giulia27: Do you have another drive which you can test with? [18:56] let me have a look [18:56] Jordan_U: I have no idea where are my usb drives [18:56] afd: the mysqldump failed again after restart? [18:57] try with another usb drive (FAT32) or an external hard drive (NTFS) [18:57] how to set ubuntu 12.04 login screen in text mode? [18:57] help have lxde but the firefox icon is not right how do i fix it? [18:57] Hello, I need to fix a broken dependency on my dad's pc, before downgrading him from quantal back to precise. apt-get -f install says that netbase breaks ifupdown, so would it be safe to remove ifupdown temporarily to correct this dependency? [18:57] afd: sudo netstat -tulpn [18:57] MacGuges: downgrading is unlikely to work at all [18:58] anyone know how to get gnome-shell-mousewheel-zoom working in ubuntu 12.04? [18:58] anyone know how to get gnome-shell-mousewheel-zoom working in ubuntu 12.04? [18:58] afd: see if you have mysql listeing on port 3306 [18:58] squid: the DBs still weren't there after the restart [18:58] I get dbus.exceptions.DBusException: org.freedesktop.DBus.Error.UnknownMethod: No existe la interfaz «(null)» en el objeto en la ruta /org/gnome/Magnifier [18:59] afd: so it did take the restore but did not retained it after a restart.. [18:59] juboba necesitas configurar el zoom en el compiz settings manager [18:59] afd: interesting [18:59] jgmdev, pero no tengo compiz [18:59] jgmdev, en gnome shell 3 [18:59] anyone know why gnumeric AND libreoffice-calc both amplify the size of a spreadsheet from 13KB to 1.3-1.5 MB after some ubuntu updates took place ??!? [18:59] sasser et Jordan_U the other drive shows in Nautilus [18:59] squid: seems like it's listening tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 2145/mysqld [18:59] no one knows how to disable gui in login screen ? [18:59] and add text mode? [18:59] gnome shell usa compiz como backend si no me equivoco [18:59] I am trying to email my work and all of a sudden the size of my spreadsheets get blown up [19:00] jgmdev, ahh [19:00] jgmdev, dejame probar [19:00] afd: do the mysqldump again....then login to the database and do a select * from [19:00] afd: see if the data is there [19:00] Anom01y: Thats not depending on Ubuntu, but on gnumeric and libreoffice-calc. [19:00] afd, did you really run mysqldump to create the dump-file and mysql to restore it? [19:00] giulia27, what kind of harddisk is the one is not shown ? [19:00] Myrtti: How do you mean? I found a howto for downgrading, and just tested a script to generate a command for apt-get. ATM it fails on the same error that motivates me to do the downgrade, this one broken dependency. [19:01] afd, because mysqldump only dumps data (as the name implies) [19:01] sasser it is a USB Samsung disk [19:01] jgmdev, nop [19:02] jgmdev, no funciona [19:02] !es | jgmdev juboba [19:02] jgmdev juboba: En la mayoría de los canales de Ubuntu, se habla sólo en inglés. Si busca ayuda en español entre al canal #ubuntu-es; escriba "/join #ubuntu-es" (sin comillas) y presione intro. [19:02] sorry Jordan_U [19:02] Myrtti: It seems rational that continuing to run the development branch of ubuntu will lead to more unstable situations like this one. But do you recommend soldiering on with Quantal? [19:02] ok :) [19:02] I need to get mousewheel magnifier working in ubuntu 12.04 [19:03] after enabling it on compiz you have to assign a short cut [19:03] mfladischer: mysqldump dumps the data in the DB but why whould it not survive a restart? [19:03] giulia27: are you sure it is formatted well ? [19:03] giulia27: Are you sure that there isn't a hardware problem with the USB drive which isn't working? [19:04] pikaciu: I only forgot to make it bootable [19:04] squid, yes, it dumps the data from the server to a file. and this file can then be used to restore the data. so if afd already has this dump-file he should use the mysql command to restore it. [19:04] Jordan_U: normally yes, I checked it [19:05] squid: something worked at some point because after navigating round phpmyadmin for a bit the tables appeared [19:05] giulia27: an external hard drive doesn't need to be bootable [19:05] giulia27: A drive mounting automatically when plugged in has *nothing* to do with it being "bootable". [19:05] squid: thanks so much for your help and I apologise for not clicking straight away with things [19:05] giulia27, so if I well understood, you wanted to make a bootable flash drive [19:05] hey, how to stop jack server ? [19:06] afd: no problem, anytime! Cheers! [19:06] help have lxde but the firefox icon is not right how do i fix it? [19:06] hello i have a problem, when i download large files via torrent my laptop freezes and can only be fixed by rebooting, any solutions? [19:06] mfladischer: that's what i thought. Thank u [19:06] sasser: yes [19:06] BlouBlou: I'd like to know too... my solution was reinstalling the OS... nuked from orbit, just to be sure ;) [19:07] squid: please drop me an email at anthonyfoxdavies@gmail.com [19:07] I'm sending you something for your trouble [19:07] Fransua: Bonjour! Would the same happen if you download a huge file from...say ...an FTP server? === satan is now known as Guest53974 [19:08] giulia27 well, in this case, you should clean it again (format) and try to make it bootable again, because it might been have written not 100% so Ubuntu does not recgnize it as a bootable disk === Guest53974 is now known as sa`tan [19:09] sasser: do I do it with Gparted ? [19:09] giulia27, no. Not with gparted [19:10] sasser: so how ? [19:10] try with Linux USB Creator [19:11] giulia27 --> http://www.linuxliveusb.com/ [19:12] not all the bootable software makers are so good; if you don`t have choises, you may look for some alternatives :) [19:14] sasser: it does not work on Linux :( [19:14] works only on Windows [19:14] My Logitech M310 wireless mouse is not appearing on Ubuntu [19:14] digitalghost? === Linuxuser is now known as Guest35627 [19:15] lsusb doesnt show it either [19:16] and any possibility with cli ? [19:16] giulia27: Are you trying to boot from this drive? Will you ever be *booting* from this drive? [19:17] ohh hey Trix__ are you having troubles with wireless adapters for ubuntu? [19:17] is my ircchat working? [19:17] giulia27, do you want to make a bootable USB key from Ubuntu or from Windows ? [19:17] yes, we can see you [19:17] maybe these commands can help you: http://www.ve3syb.ca/software/bootableusb.html [19:17] and im having problems with my wirless mouse [19:17] so trix did you need help with wireless adapter [19:17] ohh [19:18] hey dr_willis i have some text that you can look at to possibly help me with getting my boot menu back [19:18] hi, my disk was full, 100%, I've deleted some files and I did - "sync" and now if I try "df" still 100% [19:18] is digitalflz digitalghost? [19:19] hm anyway dr_willis do you want to see it? [19:19] i can try. but im at work [19:19] Rusher: How did you delete the files? How big were the files? Are you sure that 1: The files weren't simply one of multiple hard links to the same data and 2: The files are not currently open in any application? [19:19] oh ok one sec [19:19] hm, can anyone help me with my mouse? [19:20] can somebody tell me how to boot in console mode and also login in colse mode..? [19:20] dr_willis http://paste.ubuntu.com/1081676/ [19:20] and whats the mouse issue Trix__ ? ive not seen you state it to the channel.. [19:20] !text | wvdial [19:20] wvdial: To start your system in text-only mode append 'text' (without the quotes) to the kernel line in the grub menu. You can access the grub menu by pressing Esc (Grub legacy) or Shift (Grub2) during boot. For more info see https://help.ubuntu.com/community/BootOptions#Text%20Mode [19:20] i did above, one sec [19:20] i change quiet splash to text it booting in text but login screen appear in gui [19:21] yes i've done that dr_willis and it doesn't work [19:21] [12:14] My Logitech M310 wireless mouse is not appearing [19:21] lsusb does not show it either === newbie|5 is now known as hellyeah [19:21] Jordan_U: yes because if I try: [19:21] du -hx --max-depth=1, there's max 1.5G [19:21] using this my system boot in console in text but login screen come in gui..i want login in console mode [19:21] dr_willis ^ [19:21] giulia27, does this page can help you? (http://www.ve3syb.ca/software/bootableusb.html) [19:23] Linuxuser_: what version of ubuntu are you using? [19:23] latest. 12.04 [19:23] i want login screen in console mode..i am using gdm [19:23] Linuxuser_: then how come the config files make mention of 7.10? [19:23] i have to go to work soon, ill come back later [19:23] i want start x manually [19:23] I have a cifs mount (mounted from fstab) in /media/music. root has all the permissions of my cifs user but other users on the box can't create directories! I've tried changing the umask in fstab but no effect. 12.04 [19:23] sasser: I highly suspect that giulia27 does *not* want to make a bootable drive, but rather mistakenly thinks that a drive being "bootable" has something to do with it mounting automatically via nautilus when they plug it in. [19:23] It seems I've got a real pickle here. Running any apt-get command fails because of this one unmet dependency, "netbase : Breaks: ifupdown (< 0.7)", so I've tried to remove ifupdown. But dpkg refuses to do that, "ubuntu-minimal depends on ifupdown". [19:23] because i may have edited it. not exactly sure. how would i change that? [19:24] sasser: Right now their drive is not showing up in the output of "sudo parted -l" at all. [19:24] !pm | Rusher [19:24] Rusher: Please ask your questions in the channel so that other people can help you, benefit from your questions and answers, and ensure that you're not getting bad advice. Please note that some people find it rude to be sent a PM without being asked for permission to do so first. [19:24] even if i do edit that to the right thing or get it to change to the correct version dr_willis it will still probably not how my boot menu [19:24] Jordan_U maybe you are right .... it`s not the same thing a drive and making it ... [19:25] MacGuges: these things are almost always due to conflicting packages in a PPA. Please ls /etc/apt/sources.list.d. If there are things there, move them to another directory if you wish to keep them, sudo apt-get update, and then try again. [19:25] L3top!!! [19:25] hi, my disk was full, 100%, I've deleted some files and I did - "sync" and now if I try "df" still 100% [19:25] Rusher: I asked you 4 questions. You gave one answer and I can't even tell which of my questions it's supposed to answer. [19:26] L3top do you think you could help me get my boot menu to show on start up? [19:26] Linuxuser_: i also have to wonder how you have a menu.lst AND a grub.cfg - what have you been doping to this system? whats the origianl problem/ [19:26] L3top: ah, ty! there's dropbox under sources.list.d, I'll move that out. [19:27] I expect so Linuxuser_. As dr_willis is at work just hit me in #linuxmce [19:27] was tehre a recent update for NetworkManager that broke everything? I cannot create a new connection on any of my computers (all running 12.04). it always says "cannot add connection: type" [19:27] well the problem was that it kept booting ubuntu automatically without showing the boot menu and i'm trying to boot my windows vista [19:27] and also i am aware that i have a menu.lst and i have edited that so i'm not sure if i should clear it like it was before or what dr_willis [19:28] Linuxuser_: you should not have a menu.lst in 1204 [19:28] ok so shall i delete it? [19:28] Linuxuser_: you should be on grub2 [19:28] Linuxuser_: i have to wonder what all you have done in random attempts to fix this.. and if a clean reinstall would not be the best bet. [19:28] oh i tried to upgrade to grub2 and i don't think it worked what would be the command? [19:28] Jordan_U: I'm sorry, it's done, I had to restart apache [19:28] grub2 is the default.. theres should have been no need to upgrade it [19:28] i can't reinstall because i can't get on windows [19:29] how would i reinstall? [19:29] sudo apt-get install grub2 I dont know why you wouldnt have it though [19:29] Linuxuser_: backup inporntant stuff... boot ubuntu cd.. reinstall [19:29] oh. i should have it. and i'm pretty sure it didn't work when i updated it [19:29] Linuxuser_: was this a do-release upgrade? [19:29] * L3top is a bit baffled. [19:29] ? there is not reinstall button. it's either install ubuntu or try without installing [19:29] what's that? [19:30] and... installing it again.. is reinstsalling it.. [19:30] it won't duplicate dr_willis? [19:30] Linuxuser_: if this was a fresh install... it should never have been an issue. [19:30] JordanU, I just want my USB disk to be seen in Nautilus and work [19:30] and that's all I want [19:30] Linuxuser_: According to your boot info script output it looks like if you booted now you would get a grub menu which inluded options for both Ubuntu and Windows. That seems like what you want. [19:30] not if you use the exact same partitions and let it format them [19:30] Folks! do you know Linux Deeping? [19:30] yes and it doesn't do that === ameya is now known as Guest75850 [19:30] I went to eat something before getting back here [19:31] hello can anyone provide some advice for the options of mkfs.ext4? I am about to format a 12 TB RAID6 array and am wondering if there are any options I need to set special. The RAID has 6 drives of data and 2 drivers of parity, 256k stripe size. [19:31] Rusher: never heeard of it. [19:31] well what i did was i didn't choose partitions and i made it install in the same drive as my windows vista dr_willis [19:31] giulia27: OK, then forget about the word "bootable" entirely. Being "bootable" has *nothing* to do with this, and you have already confused myself and sasser by using the word. Do you understand? [19:31] Linuxuser_: if it made partions. you tell it the same partion for / as you are using now and same swap [19:31] Rusher this is the support channel for Ubuntu [19:32] Linuxuser_: can I please get a pastebin of sudo fdisk -l [19:32] Jordan_U: yes. So which word must I use instead then ? [19:32] well i dont have a partition. i made it run alongside windows which meant it wouldn't make partitions [19:32] ok [19:32] English is unfortunately not my mother tongue [19:32] MonkeyDust: well, I just wanted to know that someone of you use that [19:33] Linuxuser_: you do have a partition - sda5 is your linux / partition [19:33] giulia27: I'm not sure that one word alone describes it. I would say that "I just want my USB disk to be seen in Nautilus and work" is a good description though. [19:33] hello everyone.. may i know, according to u, which is the best IDE for Android development on Ubuntu(12.04) ? [19:33] I plug my USB flash in and the nautilus file manager pops up for me. [19:33] !poll | Guest75850 [19:33] ok, thank you Jordan_U [19:33] Guest75850: Usually, there is no single "best" application to perform a given task. It's up to you to choose, depending on your preferences, features you require, and other factors. Do NOT take polls in the channel. If you insist on getting people's opinions, ask BestBot in #ubuntu-bots. [19:34] giulia27: You're welcome. [19:34] Guest75850: perhaps go ask in #android [19:34] Thanks Dr_willis [19:34] and so, how can I make my usb key work and show on Nautilus ? [19:34] giulia27: Could you pastebin the output of "dmesg"? [19:34] After removing the dropbox PPA, running apt-get update and apt-get -f install, dpkg failed on the error "trying to overwrite /etc/init.d/networking which is also in package netbase 5.0ubuntu1", http://pastebin.com/kKGj77d6 [19:35] Linuxuser_: I have to go shortly here. Wife is en route. [19:35] on a separate note, may i know the command to check the IP of my comp? on windows ipconfig worked for me [19:35] eclipse is THE IDE for android Guest75850 [19:35] ifconfig Guest75850 [19:35] Guest10408, developing in Android is developing in JAVA. Best IDE for it is Eclipse with a plugin for android sdk. [19:35] incidentally, I got that error last week, which inspired me to downgrade this machine to precise from quantal... [19:35] same i'm going to work out. so were you the one that wanted a pastebin of fdisk -l L3top [19:35] yes [19:36] JordanU, here is the pastebin for dmesg : http://pastebin.com/vXSRy79F === tazjin|away is now known as tazjin [19:36] MacGuges: please try sudo dpkg --configure -a [19:36] L3top: will do [19:36] hilo: I can't think of anything that you would want to change about mkfs parameters because of the fact that it's on top of RAID with a given stripe size. Are you partitioning the RAID array? Will you likely have a lot of small files on this filesystem or fewer, larger, files? [19:38] Linuxuser_: What currently happens when you try to boot? [19:38] how to find out the device list and names ? [19:38] giulia27: its an epson stylus usb of 2gb in size? [19:38] it just automatically goes to ubuntu 12.04 [19:38] an5hul there's blkid or else fdisk -l [19:39] Linuxuser_: and fif you do a 'sudo update-grub' it mentions the windows os in the messages? [19:39] an5hul sudo fdisk -l [19:39] thanks MonkeyDust [19:39] ok [19:39] yes [19:40] yes it has linux image initrd image memtesest img and windows vista [19:40] Linuxuser_: Are you sure of that, because I don't see how that's possible. Do you maybe see an "input out of range" error from your monitor at some point during boot? [19:40] giulia27: tried mounting the usb by hand yet? could be its filesystem is currupted. [19:40] dr_willis: yes, my multifunction is an epson stylus [19:40] yyes i do!! [19:40] Jordan_U [19:40] that's when it changes the size of the screen [19:40] giulia27: multifinction:? meaning what exaxtly? [19:40] to fit ubuntu [19:40] dr_willis: how do I do it ? [19:40] !mount | giulia27 [19:40] giulia27: mount is used to attach devices to directories. See also https://help.ubuntu.com/community/Mount [19:41] dr_willis: it means that it's a printer, photocopier and scanner [19:41] giulia27: so you are trying to access the flash-port oN the printer? [19:41] Linuxuser_: That explains everything then. GRUB is "displaying" a menu, it's just that it's doing so at a resolution which your monitor can't handle, and thus you can't see it. [19:41] L3top: after running dpkg --configure -a, I tried apt-get -f install again, but the same error occurred. http://wijArUhL [19:42] giulia27: it seems to be device 'sda1' check with the 'sudo blkid' command. paste the putput of 'sudo blkid' for us. if you can. [19:42] oops i mean sdb1 === Guest53974 is now known as sa`tan [19:42] i want to list ALL the devices attached to my computer not just hdd's . what's the command ? [19:42] err, http://pastebin.com/wijArUhL [19:42] an5hul: try sudo blkid or sudo fdisk -l [19:42] sorry but i have to type it out in pasetbin since im on my mac [19:42] Linuxuser_: Try uncommenting "#GRUB_GFXMODE=640x480" in /etc/default/grub and then run "sudo update-grub". [19:42] and no internet on ubuntu [19:43] theres the 'use text console mode' in the /etc/default/grub file - thst i have to uncomment on some machines to get a old fashiopned grub-text only menu [19:44] u can try snapshot Linuxuser_ [19:44] My flash drive is mounting as root, and I therefor can not copy paste anything to it in Nautilus easily. Any ideas what to do here. [19:44] Linuxuser_: also at the end of /etc/default/grub remove the # befor the line that plays a BEEP when grub is loaded.. last line in the file i think [19:44] dr_willis: here is the pastebin for sudo blkid http://pastebin.com/JSyYWE88 [19:44] ya btw it won't let me save [19:44] Linuxuser_: that way if you hear a beep.. you know to hit the down arrows to try to select windows. ;) [19:45] guys booting ubuntu 12.04 lts from external hardrive takes a long time fr booting [19:45] ? [19:45] giulia27: Was the USB drive plugged in when you ran "sudo blkid"? [19:45] ok and it won't let me save dr_willis [19:45] root and only root can create directories on my cifs mount. I've tried changing the umask in fstab but no effect. 12.04... does anyone have an idea? [19:45] whts the command to open file.exe with a shell script [19:45] Linuxuser_: linux lesson #1.. you have to modify system files as the root user... [19:45] sudo EDItor /etc/default/grub [19:45] Jordan_U: yes [19:45] wine file.exe [19:45] cody__: a actual windows binary? [19:46] yes and how would i save a file using a terminal command? [19:46] as root user [19:46] sudo somethign [19:46] Can anyone help me diagnose a build failure for a python app I submit for the ubuntu app showdown? [19:46] Linuxuser_: gksudo gedit /etc/default/grub [19:46] edit a file as root ---: sudo nano /etc/default/grub [19:46] for console ;) [19:46] OHHH i did sudogk!!! [19:46] oops [19:47] That's me~! [19:47] Jordan_U: I am formatting it with one large partition/filesystem. I saw that there are options for stride size and stripe-width in mkfs and am unsure of the effect they have. [19:47] Linuxuser_: linux lesson #1.. you have to modify system files as the root user... [19:47] whats the command in terminal to get wine [19:47] apt-cache search wine [19:47] cody__: sudo apt-get install wine [19:47] sudo apt-get install wine === Guest20974 is now known as chrisward [19:47] ok i saved it now what [19:47] thanks everyone [19:47] hello [19:48] reboot dr_willis? [19:48] check if you have it, type : whereis wine [19:48] is there anybody with some experience with 'quickly' the app build helper? [19:48] Linuxuser_: you ran sudo updaate-grub after editing the file? [19:48] no i will now thanks [19:48] !anyone | meisth0th [19:48] meisth0th: A high percentage of the first questions asked in this channel start with "Does anyone/anybody..." Why not ask your next question (the real one) and find out? See also !details, !gq, and !poll. [19:48] Linuxuser_: thats lesson #2 ;) alwyas run update-grub after altering grub configs [19:49] no brainer [19:49] ok now reboot? [19:49] guntbert, i've been asking questions about 2 days, and nobody even types something [19:49] Linuxuser_: you could pastebin your /etc/default/grub first for us to look at. [19:49] so i am looking for ways to get people's attention somehow [19:49] what does the uid= do in fstab [19:49] !uuid | hed64 [19:49] hed64: To see a list of your devices/partitions and their corresponding UUID's, run this command in a !shell: « sudo blkid » (see https://wiki.ubuntu.com/LibAtaForAtaDisks for the rationale behind the transition to UUID) [19:49] i can't pastebin on the linux computer though since no internet [19:49] meisth0th: If nobody knows the answer to your question, nobody will answer. [19:50] i'm currently having the linux supported wireless adapter shipped now :) [19:50] whats the easiest way to remap keys in ubuntu ? [19:50] dr_willis: not uuid, uid=, and on a cifs mount [19:50] Linuxuser_: go for it then i guess [19:50] well, i don't want to waste my time if there isn't anybody with experience [19:50] meisth0th: #quickly might be a better channel for quetions about Quickly though. [19:50] I want my caps key to be ( [19:50] kk [19:50] Win key to be ) [19:50] hed64: man mount, may show. uid = user id for most filesystems [19:50] Jordan_U, that's something thanks [19:50] It worked!!!! [19:50] meisth0th: You're welcome. [19:51] Thank you soo much dr_willis!!! I love you no homo [19:51] Linuxuser_: i have to enable grub text menu on manmyuu of my older machines [19:51] Can anyone help me with this issue building a program for ubuntu app showdown? http://askubuntu.com/questions/161286/problems-building-application-for-ubuntu-app-showdown [19:51] http://askubuntu.com/questions/161286/problems-building-application-for-ubuntu-app-showdown [19:51] i tend to do it on all my machines [19:51] oh. ok thanks i may talk to you another time soon! Thanks again :) === tazjin is now known as tazjin|away [19:54] so, I still have no idea about what to do with my USB device === tazjin|away is now known as tazjin [19:54] !mount | giulia27 [19:54] giulia27: mount is used to attach devices to directories. See also https://help.ubuntu.com/community/Mount [19:54] I've reposted to http://ubuntuforums.org/showthread.php?p=12086249#post120862499 I'm open to any suggestions. === Newbie is now known as Guest7080 [19:55] i think the devie is sdb1 giulia27 . but i got to leave work now. back in about an hr. [19:55] ok [19:55] so I have to mount the sdb1 ? [19:56] giulia27: Try running "sudo mount /dev/sdb1 /mnt/" (though my guess is that it will fail. [19:59] cześć! [19:59] ja z nietypową [19:59] sprawą [19:59] !pl | Kwa [19:59] Kwa: Na tym kanale używamy tylko języka angielskiego. Możesz uzyskać pomoc w języku polskim na #ubuntu-pl. [19:59] oh [19:59] sorry [19:59] :x [19:59] hey has anyone successfully installed ubuntu on a mac as efi boot? [20:00] niadh: this is bug 1018038 see the workaround here: http://askubuntu.com/questions/156339/launchpad-failed-to-build-after-quickly-submitubuntu/157432#157432 [20:00] Launchpad bug 1018038 in quickly (Ubuntu Precise) "When using submitubuntu, should build depend on libglib2.0-bin" [Medium,Fix committed] https://launchpad.net/bugs/1018038 [20:00] !anyone | arashb [20:00] arashb: A high percentage of the first questions asked in this channel start with "Does anyone/anybody..." Why not ask your next question (the real one) and find out? See also !details, !gq, and !poll. [20:00] >< owned haha [20:01] arashb: I wouldn't recommend booting via EFI, I'd recommend using Apple's BIOS implementation. [20:01] trism: Excellent, thanks, will try that [20:01] Thanks guys i solved my problem [20:01] niadh: you way want to use the alternate workaround though, since comments in the bug suggest the python-distutils-extra from -proposed it causing further issues [20:02] Jordan_U: it failed, said that /dev/sda1 does not exist [20:02] Jordan_U: why not EFI? using the BIOS simulator i can't use my discrete graphics card and am forced to use my ati [20:03] i was downloading wine and a licence agreement came up and i cant hit ok [20:03] anyone ever setup fast-cgi with apache already installed on ubuntu? [20:03] got a good walk thru? [20:03] arashb: Because using EFI usually causes problem with Linux graphics drivers rather than solving them. [20:04] hello, after a ubuntu crash, I lost the sound on videos (vlc, totem movie player) but not music. How can that be ? [20:04] wait i got it [20:04] Jordan_U: but i thought ATI cards were supported decently? Also, i'd be wanting to use my intel onboard graphics which seems to be okay under EFI, in BIOS i won't even be able to use my on board as an option [20:06] root: You shouldn't run your IRC client as root. === root is now known as Guest2644 [20:07] whats included in the mac version of 12.04 iso? [20:07] I don't understand why rhythmbox provides sound, but vlc or totem doesn't ? === dark3n is now known as dark3n|off [20:08] Help - Installed inf file without sys file. How can I undo or install sys file? [20:08] kristenbb : check which audio output modules your players are using (pulseaudio, oss, alsa, etc.) [20:08] Lecram, what are you talking about [20:09] Hello, in linux what is the help when system says " ERROR: no such partition. GRUB RESCUE [20:09] cannot boot. [20:09] idlemonkey: http://www.gnu.org/software/grub/manual/grub.html#GRUB-only-offers-a-rescue-shell [20:11] Sorry,new to this. Followed instructions for pci card install with Windows driver. Didn't have inf and sys files in the same place so terminal now says inf installed but the system file isn't. [20:11] Lecram why windows driver? [20:12] Pci card doesn't have Linux driver but I found instructions on using the ndiswrapper === haylo is now known as rgnr === rgnr is now known as orgnro [20:14] Was following instructions from https://help.ubuntu.com/community/WifiDocs/Driver/Ndiswrapper === orgnro is now known as haylo [20:16] hi all i am participating in The Ubuntu App Showdown and I made a application in c language.now how can i submit it now??? [20:16] ok, no solution for my device [20:16] I think I have to make it repair by someone more knowledgeble than me [20:16] Lecram type !wifi for other/more instructions [20:17] !wifi [20:17] Wireless documentation, including how-to guides and troubleshooting information, can be found at https://help.ubuntu.com/community/WifiDocs [20:17] anyone please help its urgent!!! [20:18] !wifi [20:18] Wireless documentation, including how-to guides and troubleshooting information, can be found at https://help.ubuntu.com/community/WifiDocs [20:19] wooo maybe this? http://developer.ubuntu.com/publish/ [20:19] boa tarde meu ubuntu não para e travar video [20:19] I tried to reboot my computer but I still am lacking sound for all programs but rhythmbox [20:19] alternative to aticonfig for fan control? [20:20] kristenbb in a terminal, type alsamixer, see if you find something there [20:20] hi [20:20] can anyone help me with a problem [20:21] bbpgrs only if you're sweet [20:21] haha [20:21] well, I have a problem with sound [20:21] bbpgrs in a terminal, type alsamixer, see if you find something there [20:22] ok [20:22] i get the mixer GUI [20:23] now what? I have no idea what this stuff means [20:23] good afternoon [20:23] someone help me not for my ubuntu to catch on video? [20:23] trism: It seems to have worked, I really appreciate being pointed to the right place! [20:24] niadh: excellent, good luck in the competition [20:24] bbpgrs what's the actual issue? [20:24] trism: Thanks [20:24] MonkeyDust: i dont hear any sound from speakers or headphones [20:25] is having 4 workspace uses more video memory (gpu) than having 1-2 workspaces ? [20:25] bbpgrs in alsamixer, if you see MM, it means mute, go there and press m [20:25] ok [20:25] one sec [20:25] When I type ndiswrapper -- l it shows me the name of the sys file (netmw121) I installed but says 'invalid driver's. Know how to get rid of it? [20:25] ok i did [20:25] now they all say "00" [20:26] wooo you need a launchpad account to submit your app [20:26] ciao... c'è qualcuno che mi spiega un po' come funziona IRC? [20:26] in ubuntu 12.04 server is it normal when i type: shutdown -h 0 for my computer to do the shutdown but not to turn off the machine or do i need to look for some configuration issues? [20:26] the same is with restart [20:27] ciao... c'è qualcuno che mi spiega un po' come funziona IRC? [20:27] !es | Macca96 [20:27] ciao... c'è qualcuno che mi spiega un po' come funziona IRC? [20:27] Macca96: En la mayoría de los canales de Ubuntu, se habla sólo en inglés. Si busca ayuda en español entre al canal #ubuntu-es; escriba "/join #ubuntu-es" (sin comillas) y presione intro. [20:27] Comadrin: Restart never turned off the computer. [20:27] MonkeyDust: what am I supposed to look for in alsamixer? [20:27] it tells me that it can restart now but it does not actually restart [20:27] not my video to help me to catch [20:27] MonkeyDust: Yaa i know that...but I want to know did i have to send the c files or zip of z files or what??? [20:27] i have to manually turn off the pc and turn it on again [20:27] MonkeyDust i still get no sound even after unmuting everything in alsamixer [20:27] Any ideas why this would happen? Installed everything I could find with "ssl" in the name, all the compiler flags are correct : undefined reference to `RSA_generate_key' [20:27] #ubuntu-it [20:29] i understand that shutdown and restart are two different things. The issue i cannot understand why does it not go completely through with it. it gives me a message like <####.####> Shutdown [20:29] the same with restart [20:29] monkeydust are you still there? [20:30] wooo find instructions here http://developer.ubuntu.com/2012/07/ubuntu-app-showdown-deadline-approaching-get-your-submissions-ready/ === zz_zz_seejy is now known as zz_zz_zz_seejy [20:30] bbpgrs no other clue, sorry [20:30] MonkeyDust thank you very much for pointing in the right direction [20:30] oh man, this sucks [20:30] thaks for trying tho monkeydust [20:31] anyone else can help me? [20:31] lol, not my link [20:31] Hi all, [20:31] hello [20:31] hi! i am new to irc chat. I have a question, don't know if it is off topic here. Maybe someone can guide me. [20:31] bbpgrs: restate the issue. ;) [20:32] pabvid: whats the question? [20:32] ok dr_willis i can't hear sound from any sond device and i already tried reinstalling pulseaudio and unmuting everything in alsamixer [20:32] wooo: you may want to ask in #ubuntu-app-devel about how to submit the app without quickly [20:32] I think my filesystem is broken, I can't play sound on anything but rhythmbox after a ubuntu crash. How can I repair it, if /home is encrypted ? [20:32] I want to black out the part of the screen that is not the actual window [20:32] i had a question, I decided to switch to Ubuntu today to dual boot with windows. I got a MBR virus in windows, so I ran a dd command to wipe the first 512 bytes of my drive, this should remove all the virus from my MBR right? And it shouldn't infect my Ubuntu? [20:32] bbpgrs: laptop? desktop? hdmi? [20:33] laptop [20:33] i've been searching in google and haven't found anything at all [20:33] and i'm trying to use built-in speakers [20:33] im stuck, fglrx doesn't work for dual monitors (cant get it to work no matter what -.-), however i got fan control (aticonfig)... open source drivers i can get dual monitor to work, however no fan control? :( lol [20:33] h33lt0e: windows virus wont infevt ubuntu [20:34] Would it be ok to touch /forcefsck and reboot ? [20:34] thanks dr willis! the virus should be gone though if I ever decide to reinstall windows in a dual boot? [20:34] pabvid: rephrase that.. what you mean. [20:34] kristenbb: /forcefsck isnt in your home. [20:34] So like, anyone have a link for a how-to make ubuntu IP resolve into a host? [20:34] h33lt0e: in suprised you had a mbr vurus [20:34] dr_willis: im using a laptop [20:35] bekks: I just want to check the whole filesystem / is in. It's /dev/sda3. How can I do that ? [20:35] kristenbb: Then, sudo touch /forcefsck would be correct. [20:35] hello. Ok, finally, I found part of the solution to mke my usb drive work in Nautilus. I needed to restart the system. But the problem is that I cannot paste any folder or file into it. When I have a look at properties, it shows me that all reading, modifying... can be done in root. How to modify it ? Thank you [20:35] I'm not sure if it was an MBR virus, I think it was. It came from some java website and I lost all admin rights to do anything, and I couldnt remove anything. I ran a couple of MBR antivirus things and it found a couple of things, which is when i decided to switch to ubuntu for good [20:36] h33lt0e: Your MBR isnt even big enough to contain "a couple of things". [20:36] bbpgrs: id check the forums and askubuntu.com for the chipset and make of laptop for others with the same issues [20:36] so si just formatted the system, install ubuntu, wiped the MBR (using dd to erase the first 512 bytes), reinstalled grub [20:37] bbl. [20:37] dr_willis: no one seems to have the same problem [20:37] yea, i would think as much too only 512 bytes! [20:37] dr_willis: i just spent an hour googling this [20:37] any pro hackers !!!! [20:37] When I am at a window, let's say a gedit window, that is not maximized, i don't want to see all the stuff around at the background. Like other windows or the desktop background. It's just to keep me focused on the current window. [20:37] bbpgrs: he's gone [20:38] is this chat thing even official? [20:38] nobody here seems to be more than an average person [20:38] So like, anyone have a link for a how-to make ubuntu IP resolve into a host? IE I use irssi in putty and it resolves root@IPhere, I want it to say root@mydomainhere [20:38] bbpgrs: can I see a pastebin of sudo aplay -l [20:38] bbpgrs: everyone is a volunteer [20:39] ohhh [20:39] !patience | bbpgrs [20:39] bbpgrs: Don't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. While you wait, try searching https://help.ubuntu.com or http://ubuntuforums.org or http://askubuntu.com/ [20:39] I have a red circle in the top bar after installing inf file through ndiswrapper but without the sys file. Terminal says the driver is invalid. Any thoughts? [20:39] bbpgrs: Most helpers are "just people" but yes... this chan is official. [20:39] dr_willis, finally, my disk is shown in nautilus. But I cannot do anything unless I am in root. Any solution ? [20:39] -.- [20:40] ubottu I've been looking through these sites for more than an hour but thank you for the response [20:40] bbpgrs: I am only a bot, please don't think I'm intelligent :) [20:40] !anyone | R3pLiCa... please... just get this nonsense out of the way. [20:40] R3pLiCa... please... just get this nonsense out of the way.: A high percentage of the first questions asked in this channel start with "Does anyone/anybody..." Why not ask your next question (the real one) and find out? See also !details, !gq, and !poll. [20:40] Why do people make things like ubuntu and fedora if it's all free? [20:40] is having 4 workspace uses more video memory (gpu) than having 1-2 workspaces ? [20:40] !ot | h33lt0e... because we want it to exist. [20:40] h33lt0e... because we want it to exist.: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics (though our !guidelines apply there too). Thanks! [20:40] h33lt0e: the scope of this channel is support, try that question in off-topic [20:41] my sound is still not working [20:41] oh ok! sorry [20:41] kristenbb: same here [20:41] !open source [20:41] I rebooted, checked for file system errors, but the sound is still only working for rhythmbox. [20:41] kristenbb: I think its because ubuntu is open source, its not as reliable as windows or mac [20:42] n1ckn4me09876543: no [20:42] firefox, vlc, totem, and other programs have no sound [20:42] but i still like it better :) [20:42] what is a good ubuntu irc client, with gui? [20:42] Comadrin: I had the same issue, if I recall correctly I fixed it by appending something like reboot=pci to the kernel line in grub [20:42] grasshopper87, xchat [20:42] bbpgrs: Thats a goog topic for the off-topic. ;) [20:42] bbpgrs: I told you what I need to start troubleshooting your problem. pastebin sudo aplay -l [20:42] !info xchat | grasshopper87 [20:42] thanks a lot [20:42] grasshopper87: xchat (source: xchat): IRC client for X similar to AmIRC. In component universe, is optional. Version 2.8.8-3ubuntu12 (precise), package size 345 kB, installed size 869 kB [20:43] L3top: sorry i didn't notice and ok i'm doing it now [20:43] anybody know how to remove gui features or genome in ubuntu using terminal i mean wats th command === nigelb_ is now known as nigelb [20:43] h33lt0e, http://en.wikipedia.org/wiki/Open-source_software [20:43] kristenbb: what are you connected to for audio? [20:43] ok, any command to change root permissions for an usb device please ? [20:43] L3top: **** List of PLAYBACK Hardware Devices **** [20:43] card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] [20:43] Subdevices: 1/1 [20:43] Subdevice #0: subdevice #0 [20:43] card 0: Intel [HDA Intel], device 1: STAC92xx Digital [STAC92xx Digital] [20:43] Subdevices: 1/1 [20:43] bbpgrs: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation. [20:43] R3pLiCa: apt-get purge is the command. [20:44] !pastebin | bbpgrs [20:44] bbpgrs: For posting multi-line texts into the channel, please use http://paste.ubuntu.com | To post !screenshots use http://imagebin.org/?page=add | !pastebinit to paste directly from command line | Make sure you give us the URL for your paste - see also the channel topic. [20:44] ty bekks [20:44] is the command in terminal to get wine sudo apt-get install wine? [20:44] cody__: Yep [20:44] okay ty [20:44] L3top: http://paste.ubuntu.com/1081784/ [20:45] * Chaos- twiddles his thumbs. [20:45] L3top: just a headphone [20:45] bbpgrs: sudo apt-get install alsa-utils [20:45] pabvid [20:45] kristenbb: is this a laptop? [20:45] L3top: no [20:45] bbpgrs, open a terminal , run thsi command , sudo modprobe snd-hda-intel [20:45] L3top: but I doubt the way the sound is connected is the problem, it worked before, and it still is working for rhythmbox [20:46] the problem is that it's not working for anything else [20:46] L3top: It says i already have it installed [20:46] BluesKaj: i just id [20:46] How do I uninstall an invalid driver? [20:46] kristenbb: I don't know, based on your question, if you are trying to get audio over HDMI, spdif, analog out... etc... that was the reason for the question... and yes... it makes a tremendous difference. [20:46] bbpgrs, yopu may have to reboot , like it or not [20:47] bbl ...bbq on the go [20:47] BluesKaj: haha okay let me see where it goes with L3top first [20:47] L3top: it says i have the newest version of alsa-utils [20:48] kristenbb: okay sorry about that remark, I'm not an expert. So can you give me any instruction as to what to do to try and find out what's wrong ? [20:48] and kristenbb the reason I asked if it is a laptop, is because there is a specific bug with regard to headphone aud out on certain laptops. [20:48] L3top: again, sorry. === xazax is now known as Guest27276 [20:48] one moment bbpgrs. I am going to give you some commands to try [20:48] L3top: ok thanks [20:48] no worries kristenbb. Just trying to help. [20:48] Comadrin: see https://bugs.launchpad.net/ubuntu/+source/linux/+bug/985471/comments/25 [20:48] Launchpad bug 985471 in linux (Ubuntu) "Ubuntu precise (12.04) 64bit hang on reboot" [Medium,Incomplete] [20:49] Okay easier question - anyone know of a free nameserver service that I can use to resolve my server IP into my domain name when I connect via irssi? [20:49] Chaos-: you mean like no-ip.com? [20:50] whats the command to run wine with programs on the desktop [20:50] cody__: wine /where/exe/file/is [20:50] bbpgrs: Only if that does what I described. I tried doing it with bind9 but my domain provider is a free one, so it's cruddy. [20:51] bbpgrs: speaker-test -c 2 -t sine -l 1 -D hw:0,0 does this produce tone? [20:51] okay [20:51] !appdb | cody__ [20:51] cody__: The Wine Application DB is a database of applications and help for !Windows programs that run under !WINE: http://appdb.winehq.org - Join #winehq for application help [20:51] L3top: for me it does [20:51] L3top: nope nothing at all [20:51] ok bbpgrs I am gonna need a minute to figure out your deal. [20:52] L3top: no problem [20:52] kristenbb: please open alsamixer in terminal [20:52] L3top: done [20:52] what does it state your default sound device is? [20:52] bbpgrs: do you have a hardware switch to mute sound? [20:52] L3top: what do you mean? [20:53] bbpgrs: You may have to blacklist the ati card. Are you running the fglrx driver by chance? [20:53] auronandace: yes but its on "unmute" [20:53] L3top: i dont know what fglrx is [20:53] L3top: sorry [20:53] bbpgrs: you might hit that a couple of times as well... as to fglrx... lsmod | grep fglrx [20:54] L3top: do you mean you want me to tell you what's in front of 'card' ? [20:54] bbpgrs: this is the proprietary (restricted) ati driver. [20:54] yes please kristenbb [20:54] L3top: it's "HDA Intel PCH" [20:55] L3top: when i run "lsmod | grep fglrx" it gives me this: fglrx 2909855 149 [20:55] wow that chaos guy seems to need attention [20:55] kristenbb: if you have an /etc/asound.conf file, please pastebin it. I deal with this stuff on a much more rudimentary level... I dont fool with pulse audio at all... and your actual solution probably lies there. [20:55] L3top: then again i'd like to restate that the sound still is working with rhythmbox, but not with anything else, apparently after a power failure. [20:56] L3top: I don't have such a file [20:56] dr_willis [20:56] kristenbb: I did not see that post... thank you... that changes things a bit. [20:56] pabvid: he's not here [20:56] hey... i don't know if this is not proper to ask, but i reckon this server is mainly for ubuntu related matters. what is a good server for me to go and talk about, say, psychology, art, 42, the meaning of life, mexican food, etc.? [20:57] lol @grasshopper87 [20:57] !alis | grasshopper87 [20:57] grasshopper87: alis is a services bot that can help you find channels. Read "/msg alis help list" for help and ask any questions about it in #freenode. Example usage: /msg alis list #ubuntu* or /msg alis list *http* [20:57] grasshopper87 try #defocus [20:57] haha [20:58] that sounded sarcastic MonkeyDust [20:58] L3top: when i run "lsmod | grep fglrx" it gives me this: fglrx 2909855 149 [20:58] bbpgrs type /join #defocus and see [20:58] bbpgrs: that means you are using the fglrx driver [20:59] ok so? i dont know what that means is it bad? [20:59] thanks a lot! [20:59] bbpgrs: it is my belief that the ATI sound module is hijacking your audio settings. Again I will need time to try and figure out how to deal with that, but my initial instinct is to blacklist the ATI driver in /etc/modprobe.d/alsa-base.conf with something like option snd-hda-ati and probably some following. === Guest10408 is now known as heme [21:00] L3top: i know i sound sstupid right now but how do you blacklist the ati? [21:00] When installing bind9, do I need to update the dns entry under /etc/network/interfaces? [21:00] kristenbb: this is really going to need a pulse solution I believe... and I have 0 knowledge of it. [21:01] yeah L3top , index=-2 [21:01] Hey guys...is there a way to have ubuntu rotate wallpapers? [21:01] L3top: why would my sound problem affect all programs except for rhythmbox? [21:01] kristenbb: I could not answer that accurately without knowing what was going on during the power outage... and more information. [21:02] L3top: feel free to ask for anything, though I may not have an answer for all of it [21:02] hmm wonder if rhythmbox uses pulseaudio [21:02] L3top: if you want i can wait till youre done with kristenbb if that's better for you [21:02] bbpgrs: so... in /etc/modprobe.d/alsa-base add the line options snd-hda-ati index=-2 [21:03] great question BluesKaj [21:03] L3top: i did but i cant click "save" its grayed out [21:03] cookie : there's a space wallpaper in 10.04 that rotates, so there IS a way. [21:04] bbpgrs: You will need to edit it with root privelege... if you are using gedit then gksudo gedit /etc/modprobe.d/alsa-base for instance. [21:04] cookie you need to create an xml file, moment [21:04] alsa-base.conf [21:04] sorry [21:04] I'm trying to make my cam work. If I try to use the cam via 'webcam' or 'firefox', then 'lsof | grep dev/video0' returns two list items. But if I run 'sudo firefox', lsof won't list /dev/video0. What does it mean? [21:04] L3top: ok let me try [21:04] cookie http://www.webupd8.org/2010/02/easily-create-xml-wallpapers-with-xml.html [21:05] kristenbb: I am quite positive this is a pulse issue, and I am going to be about 0 help unless you want to uninstall it which I do not advise... [21:05] Thank you monkeydust [21:05] ui: Dont run firefox using sudo. [21:05] And, how is it possible? I would expect the contrary - say, firefox not opening the file, and sudo ff opening [21:05] I'm trying to get rid of ubuntu completely and install XP, but the install disk can't find a hard drive. Any help? [21:05] L3top: ok i added the line, sved, then quit gedit [21:05] ui: sudo firefox? first it should be gksudo (graphical app) and second, you should never run a browser as root [21:05] L3top: well I'll do anything you think might help me to solve this issue [21:05] guyz wats th best tool to edit th gui features in ubuntu??? and making new custom themes .... [21:06] It's a test in a virtual machine so it's safe [21:06] Also, I'm planning on putting ubuntu on top of XP as a dual boot but can't with ubuntu first [21:06] R3pLiCa wrong channel, but try 'quickly', you find it in the software center [21:06] kristenbb: if I were you, knowng 0 about pulse... I would take the hacky approach of sudo apt-get install --reinstall pulseaudio [21:07] bbpgrs: you can try to sudo alsa reload but honestly reboot works much better. [21:07] L3top: so you suggest that i reboot? === zz_zz_zz_seejy is now known as zz_zz_zz_zz_seej [21:08] Is there a way to set up a dual boot with Ubuntu installed first? [21:08] bbpgrs: I do. If this does not work for you, I would also comment out that line you just added and reboot again... alsa is a very tempermental beast, and I would not want it to prevent you from a future solution. [21:08] alsa reload fails a lot , but don't ask me why , bbpgrs [21:08] HDScorpio: yes, but you'd need to reinstall grub [21:08] HDScorpio you would have to repair GRUB, but technically, it's possible [21:09] afk [21:09] Is there a way I can format my hard drive? For XP first? [21:09] HDScorpio: Windows XP won't be supported after April 8, 2014 [21:09] That seems the best way to go about it [21:09] L3top: oh I think you should know that i also can't see the sound (speaker) icon on the top bar (the one with the name of the window and "file" and "edit") [21:09] ty MonkeyDust i am new to linux and i love it coz linux is way bbtr !!!! [21:09] L3top: I did reinstall it, it's still not working [21:10] Hello, I've got a weird bug were ubuntu seems to drop my input if I hit the 'p' key twice in quick succession. Is this potentially some setting that I need to change? [21:10] L3top: which is to say, rhythmbox does play sound, but everything else doesn't [21:10] R3pLiCa Please keep it related to the channel.. So, any idea on how to format my hard drive? [21:11] For my problem above: sudo before lsof solved the problem [21:11] HDScorpio: use gparted from a livecd (backup what you need first) [21:12] auronandace How would I go about that? Would my pen drive still be fully functional after that? Because the last LiveCD I made was an Ubuntu one and it broke my other pen drive [21:12] HDScorpio, google 'gparted live cd' (and there's an iso and usb avail) [21:13] HDScorpio, pendrive isn't part of ubuntu's official docs i believe [21:13] HOW VPN IS SECURE ? [21:13] L3top: does that make a difference? that im not seeing the icon [21:13] Jagginess I think I worded that wrong, I burnt the install iso onto my pen drive [21:14] Ah. When I install Ubuntu, and do nothing, are the open source drivers well installed? [21:15] HDScorpio: broke it? you can't reformat it then? [21:16] HDScorpio, http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/ [21:16] I went into System Setting - > Details - > Graphics and the system reports my drivers as "unknown". Doesn't that mean that I don't have any driver? [21:16] Auronandace It crashes my pc whenever I plug it in (XP) and doesnt show on my laptop(Ubuntu) [21:16] Can someone help me with my sound issues please ? [21:16] HDScorpio, (not part of ubuntu), you need to have a fat32 formatted partition on the usb drive.. [21:17] Jagginess It worked with ubuntu before I burnt the iso [21:17] HDScorpio, you don't burn iso's to usb drives.. [21:17] Griffrez: what graphics card do you have? [21:18] Jagginess I did... jesus maybe thats my problem. I had a program that came on the drive that let me make the drive act like a mounted CD would [21:18] ATI Radeon 4770 HD [21:18] L3top: i just rebooted and sound is still broken an i still dont see the icon [21:18] HDScorpio, you download the iso to C: , not to the : [21:18] kristenbb: rythymbox ignores pulseaudios audiosync. Your issue is with pulse audiosync. [21:18] HDScorpio, then you run the usb-maker tool [21:18] auronandace: Sorry. Didn't link your name. ATI Radeon 4770 HD. [21:18] bbpgrs: just getting back... gimme a min [21:18] Jagginess: I downloaded it to C:,the burnt it with the tool [21:18] L3top: ok [21:19] HDScorpio, what was the letter drive of the usb? [21:19] Jagginess, I can't now, the pen drive wont pick up, makes my PC crash [21:19] what's the thing with Ubunu One folders, when I move av file or folder out of it, the files arn't deleted on other machines with the account [21:19] Jagginess: I believe it was E [21:19] Griffrez: do you want to use the open source drivers or install the closed source ones? [21:19] L3top: I'm sorry these are unknown words to me. [21:19] I want to try Open Source [21:19] L3top: but you seem to know what you're talking about, which is great :) [21:19] HDScorpio, so re-format E: (the usb drive partition) .. and use that usb maker instead of unetbootin [21:19] If they don't fit my expectations, I'll later switch to Closed. [21:19] L3top: so what am I supposed to do ? [21:20] kristenbb: audiosink that is... me too... like I said... I know 0 about pulse. Our project does not use it. I do EVERYTHING through alsa. [21:20] Griffrez: it should automatically be loaded, try: sudo lsmod (pastebin the results please) [21:20] kristenbb: I was just looking up why rythembox would be different, and that is why. It ignores audiosink. [21:20] HDScorpio, can you boot with the cd? (do you have a cd drive?) [21:20] L3top: what would your project be ? maybe I could use alsa too ? [21:20] Jagginess: The pen drive is broken, are we talking about the same thing? My old pen drive broke when I burnt Ubuntu install iso to it, I have a new one I could use for the GParted [21:20] wait L3top, can i have plse and alsa at the same time? [21:20] auronandace: http://pastebin.com/njdwk4Kn [21:20] bbpgrs: Sure. [21:21] Pulse uses Alsa. [21:21] L3top: can't I make other software behave like rhythmbox? [21:21] lol... it is a home automation platform with a media center. I do the media stuff #linuxmce. It is not for everyone. It is a bit of a control freak. [21:21] HDScorpio, "burn" means to iso->cd. The Usb MAker tools do not "burn", they "extract" stuff from the .iso and place those files on the usb. [21:21] kristenbb: ^ [21:21] Griffrez: yup, it looks like the radeon driver is in use [21:21] Jagginess, I can, the XP install doesn't find a hard drive. But I haven't yet made a gparted liveCD because of this error: http://i.imgur.com/yLOYs.png [21:22] HDScorpio, imgburn is free and very easy to "burn" to a "CD". -- If you have a cd drive. [21:22] auronandace: But then why do the System Details not detect the driver? [21:22] Jagginess Well, I mounted the iso to my pen drive and it broke [21:22] L3top: so bottom line, what can I do about it? [21:22] The iso for ubuntu [21:22] * jagginess thinks HDScorpio is either broked there or somewhere in translation. [21:22] kristenbb: you would have to remove pulse... but... that is not an ubuntu support answer... and I am not recommending it... you need to get someone who understands pulse, or do some googling on audiosink. I am sorry I cannot help you here... I only know what I know. [21:23] L3top: so do you have any other suggestions? [21:23] getting there bbpgrs. [21:23] L3top: ok tyt [21:23] Griffrez: i know my graphics card and i have the right drivers installed but that screen still says unknown on my system [21:23] L3top: It worked just a few hours ago, maybe I could just install and reinstall something ? [21:23] Jagginess: I'm trying to explain to you that my old pen drive has nothing to do with the current issue of me not being able to run the windows XP install due to it not picking up on my ubuntu installed hard drive [21:23] auronandace: Hmmm. If you say so. [21:23] Griffrez: i would just ignore it [21:23] L3top: I already tried it with pulseaudio, maybe I could try it with something else ? [21:24] kristenbb: I am sorry I cannot help you further... if the --reinstall of pulse does not help... I am of no use to you. I am very sorry. [21:24] Griffrez: mesa-utils package is required to show it in System Details [21:24] auronandace: Okay, then. If that's so, I'm changing to Closed Source. [21:24] bekks, afaik everything eventually links to alsa in one way or another whether pulseaudio is used or not , but flash needs pulseaudio for web audio content , and doesn't link to alsa directly on some systems [21:24] Griffrez: i'm using closed source and it says unknown [21:25] BluesKaj: Pulseaudio will be silent without ALSA. [21:25] bbpgrs: kids are going ape atm... I am afraid you will have to wait a bit unless BluesKaj returns from his bbq adventure... yes... we are just "guys" trying to help. [21:25] Jagginess: I get that I have to format my hard disk, but I can't actually create a live CD because the GParted sourceforge won't show correctly http://i.imgur.com/yLOYs.png [21:25] bekks, of course , if I could I wouldn't use pulseaudio \ [21:25] L3top: ok lol yeah guess i just expected my problem to be something simple [21:25] auronandace: I ain't saying the otherwise. I just had the expectation that I could have a better version of the Open driver, because I tried to play Minecraft with it, but it ran at ~30 FPS, but with Closed Source, it ran around 120 FPS. [21:25] HDScorpio, read. [21:25] BluesKaj: I never had problems with the stock installation of pulse. [21:26] HDScorpio, what did i say 10 minutes ago? [21:26] L3top: sorry for that [21:26] HDScorpio, google [21:26] (told him "what" to google) === hg is now known as Guest64415 [21:26] Jagginess: You was talking about my old pen drive. I have googled it, I got how to make a liveCD but I don't have access to the gparted files because the link doesnt work [21:27] bbpgrs: no worries friend... but if google could not find a similar issue... it is not going to be "obvious"... it broaches one-off level. [21:27] HDScorpio, what did i tell you to google? [21:27] HDScorpio http://sourceforge.net/projects/gparted/files/gparted-live-stable/ [21:27] http://i.imgur.com/yLOYs.png [21:27] Christ. [21:27] bekks, me neither , but that doesn't mean I like having to use it ...another level of audio processing that I didn't need until installinga pci soundcard [21:27] bbpgrs: I am, however, convinced it is related to the fglrx driver trying to make audio avail to HDMI. I would bet a little money on it. [21:27] jagginess don't say to 'google it', when people ask for help, please [21:27] I'm on that site, it doesnt work. The formatting is messed up [21:28] L3top: ok guess i'll have to go with no sound :/ thanks so much for your time though [21:28] HDScorpio, http://sourceforge.net/projects/gparted/files/gparted-live-stable/ << you tried? [21:28] bbpgrs: for the sake of argument... please give me the output of lspci -nn | grep VGA [21:28] auronandace: Going to activate the Closed driver. If I clash into any issue, I'll come back here and talk about it. :P [21:28] BluesKaj: A PCI soundcard has nothing to do with it. And personally, I dont care about that additional layer, since it always worked for me until today. [21:28] ok one sec L3top [21:28] Griffrez: hope it works well [21:28] Jagginess: Not yet, I couldn't get that far as everything I clicked led to http://gparted.sourceforge.net/livecd.php/ [21:29] bbpgrs: "no audio" is not an acceptable resolution IMO. I will bend over backwards to help rather than you resign yourself to being deaf on the internet [21:29] IIRC there is a terminal command to burn an ISO... just print that [21:29] When I turned my computer on about 30 minutes ago it booted up looking all whacky mix color glitchy. It didn't do it after a cold shut down, but I wonder if these random glitches are common in Linux? [21:29] HDScorpio, try using firefox.. i see you're using chrome. [21:29] L3top: i get this "http://paste.ubuntu.com/1081858/" when i run "lspci -nn | grep VGA" [21:29] robertzaccour: sounds like an issue with the VRAM not clearing [21:29] Jagginess, the download link works for me now [21:30] robertzaccour: yes they are common [21:30] tonsofpcs, could that cause problems later? Is there something I should do? [21:30] Jagginess, I have bookmarked the tutorial and download link and will do it tomorrow, thanks for the help and sorry if I confused you [21:30] robertzaccour: its harmless [21:30] bbpgrs: for the record, for one line results like that, you can just drop them here. [21:30] robertzaccour: it could. That said, I had a PC with similar issues - linux had abssolutely no problem with it, win98 would fail hard. [21:31] HDScorpio, when you use gparted. Resize your linux partition, and then move it towards the end. Then make a new partition at the "beginning" (ntfs). I stop here. [21:31] replacing video card was the solution for that one [21:31] L3top: ok [21:31] auronandace, also sometimes inside a window there will be colored lines completely across looks like dead pixels, until I maximize it that clears it sometimes or close it [21:31] L3top: so what does that line mean? [21:31] bbpgrs: That should work. I would not expect this issue... I will continue to think about it... but I might be gone for 30min or so. Please check back later. I am usually here. [21:32] In system info it says graphics unknown [21:32] is there any tool with GUI to manage lvm encrypted partitions? [21:32] L3top: can i add you to friends list? [21:32] robertzaccour: that sounds like a different issue, i thought you were just talking about plymouth (the splash thingy) [21:32] L3top so i know when youre on? [21:32] bbpgrs: that is an explanation as to your hardware in a way I understand. [21:32] tonsofpcs, graphics unknown. is that bad? [21:32] sure bbpgrs. [21:32] bekks , so you say but my experience is different , and unril you install a maudio pci card , you can't say that with any conviction [21:32] auronandace, it doesn't happen often, just notice it sometimes [21:32] I am almost always on... I am not always available bbpgrs [21:32] L3top ok [21:33] is there any tool with GUI to manage lvm encrypted partitions?? [21:33] L3top: don't worry i don't expect you to be always available [21:33] simplew: No reason to ask every minute. And the answer is "no". [21:33] robertzaccour: as they said you, those glitches are totally harmless [21:33] L3top: you have other stuff to do i understand that [21:33] bekks: so theres only Mageia with such tool? [21:33] ui, oh ok. what about in system info? it says graphics unknown. Is that bad? [21:34] robertzaccour: no, mine says the same and it works [21:34] simplew: I never heard of Mageia. Using Ubuntu, the answer is "no". :) [21:34] bekks: mageia = mandriva fork [21:35] robertzaccour: as long as the contents display correctly on the screen, I guess it's not [21:35] auronandace, haha I wonder how the graphics get displayed if the chip is unknown? [21:35] bekks: you can check last month on distrowatch.com and you will the second distro from top 5 [21:35] oh ok haha [21:35] bekks: but thanks for the answer [21:35] robertzaccour: it should be fine. If you want the UI to display the correct information instead of unknown, try installing mesa-utils package. [21:35] robertzaccour: it is unknown only to whatever that system screen tries to use to detect it, i have the right drivers installed and it all works [21:36] revol0xf, how do I install that? [21:36] robertzaccour: sudo apt-get install mesa-utils [21:38] revol0xf, thanks. Intel Sandybridge Mobile [21:38] speaker-test -c 2 -t sine -l 1 -D hw:0,0 does make a sound, but any other program doesn't. [21:39] auronandace: Hey. What is this "post-release update" driver? [21:39] it's driving my nutts :( [21:39] Griffrez: no idea sorry [21:39] robertzaccour: no problem. === miguel is now known as Guest43810 [21:39] auronandace: I had an idea it could be an update to the driver, but it gives me an error on try. [21:42] kristenbb: is the correct output device selected in sound prefs? === |_ocke2 is now known as |_ocke [21:45] ActionParsnip: I'm sorry, what does that mean? [21:45] kristenbb: in dash, search for sound, check the right sound device is selected === sertac_onay is now known as sertaconay [21:46] hello [21:46] ActionParsnip: in the 'play sound through' window, you mean? [21:46] ActionParsnip: I have 4 entries there, I tried them all, with 'test sound', but none worked. [21:47] I want to upgrade from 11.10 to 12.04 but upgrade manager isnt showing any new distributions [21:48] ActionParsnip: omg thank you it worked lol. you're a life saver I was going crazy. Why would this have changed during a power failure? [21:48] kristenbb: and why would it still work for rhythmbox, if the wrong output was selected ? [21:49] anyone know why i can't upgrade> [21:51] liminal type !upgrade for instructions [21:51] import xchat [21:52] kristenbb: np, the clue was the fact that in the speaker test you were specifying the device [21:52] kristenbb: which implies one does work, the system just isn't using the right one ;) [21:52] liminal: do you have "for any new version" selected in update manager/preferences [21:52] ActionParsnip: I see. But why would it have changed without my consent? [21:52] liminal: i don't believe it's offered til 12.04.1 [21:53] ActionParsnip: I had never even gone in that window ever before. [21:53] kristenbb: no idea, I know very little about sound, never had a sound issue :). Even working ok here on quantal :) [21:53] ActionParsnip: ok fair enough, well thx for ur help. [21:54] kristenbb: np [21:56] possible to remove top panel on secondery monitor with unity/ubuntu 12.04? [21:56] in which channel i can ask if an specific chat is a irc? [21:57] keithb2, i dont see any penglon releases in my /etc/apt/sources.list [22:00] liminal: try using update manager rather than editing the apt files directly [22:00] gozon: i dont even get what you want [22:00] sod that.. update manager blows [22:01] Where can I find the source code of VIDIOC_S_STD of the v4l2 implementation? [22:01] i7c, i want to connect to a chat room with xchat bu i dont know if is a irc chat and the server name [22:02] gozon: site? [22:02] elchat.com [22:02] ui elchat.com [22:02] hey guys, i've finally installed ubuntu 12.04 as an efi-boot option but now when i boot it up i get stuck at the purple screen, i hear the noise and my keyboard backlight comes on so i know it booting, any suggestions on what to check next? [22:03] deb http://gb.archive.ubuntu.com/ubuntu/ oneiric-security multiverse [22:04] i need that but for pangolin [22:04] liminal: change oneric to precise [22:06] question, how do i find out if i;m running/have got, some 32 bit liberys on my 64 bit unbutobox ? [22:08] elspuddy_: ls -l /usr/lib32/ [22:08] whats better then xteam? [22:08] Casey: xterm? === flux|earth is now known as [flux] [22:09] thanks iceroot , can you tell me how i can get some 32 libs ? [22:10] What is the best way to install KDE on Ubuntu? [22:10] Griffrez: sudo apt-get install kubuntu-desktop [22:10] elspuddy_: which ubuntu-version? [22:11] does anyone know how to disable the security manager for tomcat6? [22:11] Saiki: #tomcat [22:11] iceroot, 12.04 [22:11] Whoa. 600 MB [22:11] elspuddy_: then its using multiarch and should pull the libs automaticly when needed [22:11] elspuddy_: why you need 32bit libs? (wine + diablo + 32bit opengl libs)? [22:11] iceroot: channel is dead. and it's an ubuntu default [22:12] Saiki: tomcatz is not installed by default [22:12] hi how can i remove and upstart service completely ? [22:12] iceroot, trying to install hlds and it need 32 libs if runing on a 64 bit os [22:12] iceroot: I mean that the package defaults from the repo have it enabled [22:12] Saiki: and then EVERY program in the repo would be supported here [22:13] iceroot: never hurts to ask I figure [22:13] iceroot: I haven't gotten ant answers in #tomcat in weeks [22:14] Madame0u [22:14] how do i paste in xterm [22:14] Casey: shift + insert === madame_ou is now known as Madame0u [22:14] hey i am trying to set up apache so that when i type "localhost" in address bar i get to one page but when i type "localhost2" in address bar i get to somewhere else but i can't seem to be able to figure it out. do any of you have any links to any resources explaining this? [22:14] yes i googled :( === fishwithapipe is now known as f|shy [22:15] moment: user and root perhaps? [22:16] what is the offical name of the wubi pre-loaded onto a boot disc? [22:16] hi again =) [22:16] Saiki: http://platform.xwiki.org/xwiki/bin/view/AdminGuide/InstallationTomcat#HJavaSecurityManager [22:16] Saiki: never hurts to do some searching instead of waiting for weeks for an answer [22:17] Saiki: http://www.datadisk.co.uk/html_docs/java_app/tomcat6/tomcat6_security.htm [22:18] iceroot: thanks [22:18] #include [22:18] #include [22:18] int main(){ [22:18] char s[1000]; [22:18] int pos[1000]; [22:18] haxxpop: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation. [22:18] int num = 0; === zz_megabitdragon is now known as megabitdragon [22:19] what is the offical name of the wubi pre-loaded onto a boot disc?? [22:20] How do I set a file descriptor #1 to stdout in a shell script? [22:20] KDE sure takes a lot of time to set up [22:20] Question - is there any way to track the exact amount of network usage that is coming from a specific IP address on my LAN? For example, I'm streaming video from a camera on my LAN (network surveillance camera) and I'm curious to see how much I'm using to stream. [22:20] haxxpop: #bash [22:21] Roasted: yes [22:21] let me find which one I used to do that again [22:21] titan, okay - thanks! [22:22] Roasted: looking for ubuntu equivalent [22:22] hello what is the offical name of a wubi pre-installed onto an iso and is it possibe to un-do the duel boot created by this application on the iso???? plz [22:24] padmick1 wubi is a program inside windows, delete it like you would delete any other windows program [22:25] no cannot because it was installed on a boot disc nothing to do with windows [22:25] a ubuntu boot disc [22:25] does not exist in windows [22:26] if it doesn't exist in windows, how does the dual boot exist? [22:26] padmick1 not clear what you mean, wubi means windows ubuntu installer [22:27] well i require the name of the application that creates a duel boot of ubuntu and windows from a boot disk [22:28] and how to remove the duel boot [22:28] padmick1 install ubuntu on a free partition, delete ubuntu by deleting that partition [22:29] hi [22:29] ubuntu is already removed but the duel boot remains [22:29] Roasted: You can do it with etherape [22:29] need help [22:29] does a map but you can view statistics for all hosts it finds [22:29] padmick1 i missed that part in your original question [22:30] ok sorry i just need a way to remove the software that creates the partition and controls it [22:31] titan, thanks, looking into it now. [22:32] Roasted: np, once you set the interface and it starts maping open up the nodes to watch all of their current speed, updates often... You can specify types as well, in/out or both, tcp, ip etc etc [22:32] What was the package for KDE, again? [22:32] kde-plasma-desktop right? [22:32] There was a guy who gave me a different one. [22:32] why i try to type apt-get on my terminal i'm stuck at 0% [connecting 192.168.blah.blah (blah)] [connecting to 192.blah.blah.blah] BUT when i do give a sudo apt-get command everythin works find...how can i make it work back to normal again? [22:33] You need to use sudo apt-get [22:33] i'm having troble with this ups softare it doesn't seem to be running the email alert script also i'm runnig lubuntu [22:33] coolroot, using sudo is normal to do apt-get [22:34] Is there a way to see my terminal history? [22:34] Like... commands I've done? [22:35] Because I am not sure what was the package I used... I want to uninstall KDE. Was just trying. [22:35] no... OerHeks if ur command works find at first and then u notice the next day that it isn't working then there's a trouble...... [22:35] Griffrez: you use kubuntu-desktop as well, I like doing just the package though so I can switch back and forth [22:35] Oh. [22:35] I didn't remember the package's name. xD [22:35] .bash_history [22:35] Yeah, but, the problem is that it messes my App lists [22:35] I got a bunch of KDE stuff [22:35] : .bash_history [22:36] On Unity. :P [22:36] Yeah. I got it, Titan [22:36] xD [22:36] Thanks. :) [22:36] Griffrez: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation. [22:36] yup :) [22:36] titan, how good are you with etherape? [22:36] So... sudo apt-get remove kubuntu-desktop? [22:36] Roasted: enough to get around a check it out a few times [22:37] titan, I have the node pulled up for the camera I wanted to look at, but I'm a little confused at the output I'm seeing. [22:37] Griffrez: or purge if you want to get rid of it all :) [22:37] What is the different between remove and purge? [22:37] it should just say like kbps or whatever [22:37] purge does all files... config an all [22:37] Weird [22:37] remove just removes what it installed, not what was configured [22:37] It only detects one package [22:37] :( [22:38] titan, I assume I should be looking "instantaneous" for watching the EXACT speed right then and there. [22:38] That weights around 60 Kb [22:38] Roasted: It is at that moment and keeps refreshing... it refreshes quite often... [22:39] titan: Is this normal? [22:39] so you really only see what is doing right then... like my ip cameras aren't using much... and mostly 0K because they aren't in sentry or motion detection [22:39] not sure Griffrez, never looked at the size it uninstalled at... [22:40] titan, what confuses me is once I shut off totem (which is streaming the RTSP URL to the camera) my speeds go UP... [22:40] that is why I use purge though :) [22:40] titan: It installed with 600MB [22:40] titan, I don't understand how my speeds can go up when I turn off the streaming [22:40] titan: I'll try... it might do it. [22:40] titan: I am going to use purge. [22:41] Roasted: as it finishes writing or something? I am sure it could be a little behind, not sure how the buffer works... I always used it to see who was hogging the bandwidth back int he day :) [22:41] so really only used it to see the large sustained [22:41] I cant seem to get flash to work on Ubuntu 12.04. I tried installing it from the software center, and even tried installing Lightspark. neither work for firefox or chromium [22:41] titan: Weird... it didn't uninstall any of the applications. :\ [22:41] like my 6MB/s downloads down on the NAS right now... there is where all my bw is going [22:42] titan, I'm not sure it's writing anything. I mean, it's set up for Motion detection (I use "Motion" from the repos) but in this instance I'm just streaming it. [22:42] whats the command for checking or changing a file's owner? [22:42] titan, I'm just trying to compare the difference with H264 vs MPEG4 streams, as I've heard H264 isn't that great vs MPEG4. [22:42] right, you have to do them individually griff [22:42] Casey, ls -l is what I use [22:42] titan: Damn... xD [22:42] Casey: chown/chgrp for changing [22:43] Casey, checking is ls -l [22:43] yeah h264 is huge in comparison [22:43] titan, I'm not so sure it is. [22:43] I can tell you now, set mpeg4 and forget it :) [22:43] i upgraded from 11.10 and it screwed everything up [22:43] titan, in fact I've heard a lot that suggests H264 isn't anything to really be excited about. [22:44] not just in bandwidth... size [22:44] I have some .flac files. When I look at their properties they all list 0.0 seconds duration. Also, when I try to oggenc them I get 'is not a supported format' (oggenc does support flac) [22:44] titan, pardon? [22:44] titan, I'm getting the vibe you like h264, but said to "set mpeg4 and forget it" ??? [22:44] h264 is great for HD content... but size you don't want to record the largest format [22:44] hey guys, i've never applied a .patch file. what's the best way to apply them? [22:44] mp4 is easier to use for others, smaller, more efficient [22:45] I love h264/x264 for HD content when quality matters [22:45] titan, in regard to security cameras, though, I'm seeing so little benefit there. [22:45] for motion recordings, you don't need that extra size and bandwidth usage if you are keeping the files [22:45] titan, in fact a lot of CCTV installers refuse to use H264, citing it as a marketing gimmick more than anything else. [22:45] exactly... very little for security camera... [22:45] on them, yes it is [22:45] titan, come to think of it, I guess I'm not even using MPEG4 on my Ubuntu server... [22:46] titan, I'm using MJPG... Motion JPG... [22:46] they aren't high enough quality optics/vid codecs to take advantage of it [22:46] titan, MPEG4 is only what I'm using when I'm actively watching the stream. [22:46] that works too... a lot use that to save more size [22:46] I use video but I have a ton of space [22:46] I cant seem to get flash to work on Ubuntu 12.04. I tried installing it from the software center, and even tried installing Lightspark. neither work for firefox or chromium [22:47] titan, I'm using a 1 mpx camera that does dual stream with Motion on Ubuntu... 247 @ 1fps and then motion detection @ 15 fps... I'm averaging about 90GB for 30 days worth of AVI's. [22:47] titan, it outputs everything in AVI format through the MJPG stream it captures. [22:47] Would anyone happen to know which file I'd need to edit to apply "vga=789" for boot? [22:47] hello [22:47] hmm yeah see at 1mpx h264 has no use or business there [22:48] titan, it's a triple stream camera, so it's not the only thing I'm stuck with, which is good. [22:48] titan, after all, Motion really only supports Motion JPG (MJPG) streams to begin wtih. [22:48] I would use the motion jpg/mp4 to do it... if it converts to avi that is fine if you want the video to see, you could also leave in jpg and use the software to stream them [22:48] yeah [22:48] I use my NAS software for mine [22:48] titan, mind if I PM you? [22:48] so I get mpg4 output or whatever I guess, I use mpeg4 [22:49] not at all [22:50] can i use apt-get install and specify a repository from which it should download? [22:50] like this one http://code.google.com/p/gdata-python-client/downloads/list [22:50] grub scanned and listed one too many entries for windows I need to delete one which does not work. how? === argot is now known as argot|pryer [22:51] Wiz_KeeD: well. kinda. You can use "-t" to specify the "name" of the repository. Or use smth like "apt-get install package=version" to get some version which is presumable available on one repository. [22:51] muelli, how can that apply for the link i gave you above? [22:52] well Wiz_KeeD. That's not a debian repository though. [22:52] how can i install it then? [22:52] Wiz_KeeD: download the tarball and read the manpage [22:52] err. the README. Sorry. [22:52] or most likely the INSTALL file. [22:52] in general though: configure; make; make install === matt_symes is now known as someoneelse [22:55] i don't understand [22:55] i unzipped the zip [22:55] and i see a setup.py [22:55] i did python setup.py install [22:55] something went on, nothing changed [22:55] hey guys i have some problems with apache in ubuntu, can i ask here or is there a special apache channel? [22:57] moment: there probably is #apache. [22:57] or #httpd I think [22:57] hello [22:58] Question,.. what script language and what text editor could I make for an opteration in terminal? [22:58] basically,.. I wanns automate a few things [22:58] want* [22:59] grub scanned and listed one too many entries for windows I need to delete one which does not work. how? [22:59] Murd0ck: eh, probably "any" is the answer to both questions. "nano" is a preinstalled text editor, I think. And you can use bash scripts to automate your shell tasks. Try to find the "Advanced Bash Scripting Guide". [23:01] Ty,.. is that a book? [23:02] http://tldp.org/LDP/abs/html/ [23:02] that it? [23:05] Anyone know if there's a util that will read from a fifo and just write to the disk like a normal file, but if a program comes along and tries to open the fifo, feeds it the file contents and then deletes the file after it's caught up? Fifo with buffer, basically. [23:06] soosh, that would be something like a virus routine? [23:07] when was 12.04 released? i need to find out which forum posts are completely irrelevant to my issues [23:07] OerHeks: No, actually I need to proccess the contents of a logfile FIFO order, but I don't want to write it to disk because it'll be huge. [23:07] arashb, in 2012 month 04 [23:07] thank you [23:08] But the listening process might not always be available [23:08] soosh: eh, so FIFOs are buffered, obviously. And you can configure the size with ulimit IIRC. [23:08] muelli: Cool, I didn't know that. [23:09] Rather, I knew they were buffered but I thought it was fixed at 65k or so [23:10] soosh: if you can't do that due to permissions or so, you might be able to engineer smth with two FIFOs, i.e. build a tiny helper program that reads a FIFO, dumps to it disk and as soon as it can write out all the contents to another FIFO, it'll delete the buffer file. That sounds like 30 lines of Python. [23:10] Yeah, I thought about that, but I was hoping there was a nice solution. I'm root so looks like this'll work. Thanks. [23:11] soosh: -p The pipe size in 512-byte blocks (this may not be set) [23:11] muelli, Awesome. [23:13] alt-tab for changing windows not working on gnome-shell where to look? [23:13] how can I view visualizations in rhythmbox? [23:13] cntb: are you looking for Alt+`, i.e. the key above the tab? [23:14] nope muelli tradittional alt+tab [23:14] cntb: cf https://live.gnome.org/GnomeShell/CheatSheet [23:14] I'm getting a lot of stuttering and occasionally total audio stream curruption (until I the audio output profile which fixes it) could this be related? from syslog: http://pastie.org/4222841 it's starting to get rather frustrating. Ubuntu 12.04 latest kernel. [23:14] ty muelli [23:16] what program records video with audio from my laptop's camera and microphone? [23:16] kermit: vlc I think. [23:16] muelli: ty [23:17] muelli: i ran it, theres a play button but not a record button [23:17] kermit: my VLC has a "Capture Device" menu item. [23:18] Hey. I play the videos (regardless of the player) MKV format, the film is advanced to a different scene continuously, ie, come on. As I can do to fix this problem? [23:19] hola [23:23] I need start a service first than other at boot (schroot is running after all my scripts at /etc/init.d/). How can I change his orders? [23:23] muelli: i have the same prob with mencoder, the video plays back about 2x as fast as the audio :/ [23:24] hello guys i'm trying to set apache up under ubuntu so that typing in "localhost" will lead to the front page and typing in "wiki" will lead to another page. i already made both host names point at 127.0.0.1 in my host file. my default configuration file for apache looks [23:24] like this: http://pastebin.com/Sr7LSt7 but it's not working, when i type in wiki i get 301 moved permanently. funny thing is th1at if i change the document root of the first virtualhost to /var/www/wiki then it actually works (except localhost now doesn't point at front page). [23:24] tried asking in apache but that place seems pretty dead so now i'm trying here. [23:26] i just signed up for a vps [23:26] and setting up ubuntu 12.01 using LAMP [23:26] i just wanted to clarify what is hostname for ? right now should i just leave it as localhost ? [23:28] muelli: oh it worked with a different codec, thanks! [23:28] duckxx: there is no ubuntu 12.01 [23:29] wow [23:29] bash is much simpler then C# [23:30] from the looks of it, tho I could be wrong,.. there is no higher architecture other then linux shell === tazjin is now known as tazjin|away [23:33] duckxx: Make it what you want it to be. If you have a domain name, then make in something like vps.example.com, where example.com is your domain name. [23:34] is there a tool / utility that can auto provision VM's in a single host machine? [23:34] Hey. I play the videos (regardless of the player) MKV format, the film is advanced to a different scene continuously, ie, come on. As I can do to fix this problem? [23:34] something like amazon [23:34] I have the last vlc and show the follow> [0x7fdf98019ed8] main input error: demux doesn't like DEMUX_GET_TIME [23:34] I has installed the last .h24 code library [23:35] the 3d aceleration is working [23:35] I have installed my graphic card driver ATI [23:35] totem show The playback of this movie requires a H.264 decoder plugin which is not installed. [23:35] Kaffeine show fine the video rate but the subtitle is smallest [23:37] I all, I have a dedicated server which has ubuntu on it, it doesn't have /home in its own parition, it also has a drive that is not being used. How would I move the /home from / to the secondary drive (which is not currently mounted) [23:37] you tried #vlc? [23:40] I have the last vlc and show the follow> [0x7fdf98019ed8] main input error: demux doesn't like DEMUX_GET_TIME [23:40] HOOOORAY! [23:40] I'm looking for a way to make a little ubuntu box a router that is *really* secure. Anyone have a favorite procedure ABC123 step-by-step guide to share?? [23:40] wilfredor: since you see it in vlc try their channel, much more prepared for it.... [23:41] titan: ok, thanks [23:41] How can I change my nickname? '/set nick ' isn't working. [23:41] linuxbook: "/nick" === linuxbook is now known as Tracky [23:42] without the quaotes [23:42] Thank you very much ;) [23:42] quotes [23:42] any simple way to auto install ( i.e. via wget or via apt-get) sun java on oneiric or (preferably) precise64 ? Ive found tons of sites but none of them seem to be "official". [23:43] how can I get Ubuntu to see my Cisco air-cb21AG-A-K9 [23:45] how do i locate a file ? [23:46] I'm trying this command: mount /dev/stb1 /home2 and it returns with mount: mount point /home2 does not exist how do I fix this? [23:47] elspuddy_, what file are you looking for? do you know it's name? [23:47] could someone help me with magnet links? [23:47] im following a couple guides, and- its not working out well. [23:47] jeeves_moss, yep, its o.k i found the command to find the file :) [23:47] elspuddy_, locate? [23:48] jeeves_moss, thats the one :) was looking for a lib file === japro_ is now known as japro [23:49] and one know how to fix this error , ./steamcmd: error while loading shared libraries: libstdc++.so.6 : cannot open shared object file : no sutch file or directory [23:53] anyone? [23:57] hey is anyone familiar with ClamAv antisoftware? [23:57] antivirus software* === Neto is now known as PandoraCheat [23:59] how to tell using "top" if something is a zombie (i.e. its not doing anything?) [23:59] anyone know how to fix this: The following packages have unmet dependencies: [23:59] linux-image-generic-pae: Depends: linux-image-3.2.0-27-generic-pae but it is not installed