=== e66___ is now known as e66 === ubuntu is now known as sebastien [03:24] Hello all. [03:25] I chrooted my HDD partition while on the liveCD (currently on it) [03:25] How do I umount the chrooted partition? [03:37] you exit the chroot first [03:37] then umount -lf /dev/sdXY [03:38] where X is the drive and Y the partition you mounted [03:38] you literally type exit to leave the chroot === [mad]Berry is now known as madberry [06:31] hi === ocs is now known as faLUCE [07:02] hi [07:04] if I downloaded a .jar and wanted to put it in a directory, which one should it go in? (keeping with Linux rules) [07:29] Hi. Is there a fix for Clementine, which ignores the mediabuttons, like pause/play? [07:37] TopGear: didn't find any ... [07:37] Apparently it should work, but I never managed to get it to work. [07:38] Smurphy: Hmm. That sucks... I do remember it working, though. I only don't recall when. [07:38] ack. [07:39] prefere Clementine to Amarok - but I need these buttons to work too :( [07:44] Smurphy: I have Fn buttons on my laptop. They don't work but using Ctrl does. [07:46] TopGear: I have them all on my laptop and on my Keyboar connected to the Docking station of that laptop. Doesn't work. [07:47] Also - on the Mac-Mini I have - connected through a KVM - it doesn't work either., [07:47] Amarok works out of the Box though. [07:50] Smurphy: Well, I'll go with Amarok for the time being. [07:57] Hello, I am using linux-kubuntu on my dell inspiron 5030. My "Disable Touchpad" button (on my keyboard) doesn't work, how can i fix that? [08:00] TopGear: same here ... [08:01] fouad: I'm doing ti differently. [08:01] howdo i setup my workspaces to cover both my monitors for each workspace? [08:01] fouad: with this: Device=`/usr/bin/xinput --list | grep AlpsPS | awk '{ print $7 }' | cut -d '=' -f 2` [08:01] I identify the device which is the touchpad. [08:01] and with this: /usr/bin/xinput --set-prop $Device 144 0 [08:01] I can disable it. [08:02] Smurphy: I am new with kubuntu/linux, i don't get what you are saying [08:03] Smurphy: but i am trying to disable it using the button on my keyboard that disables/enables it [08:03] fouad: The Disable Touchpad button works under Windows, because Windows has drivers for it. [08:03] Under Linux you don't have that driver. [08:04] so all you can do - is disable it thropugh other means. [08:04] Smurphy: but i remember i installed kubuntu or ubuntu on this same laptop and it worked [08:05] They have changed the old way to configure keyboards/mice in the last 2 releases. They moved over to evdev drivers. [08:05] It's not all as it was before. [08:06] Smurphy: i see [08:06] Smurphy: is there a way to only get this particular driver? [08:07] it's already there. The functionality is not yet implemented in the GUI. [08:08] Howdo I make a workspace include BOTH my displays into one workspace? Only one screen is used atm [08:09] Smurphy: so there is no way to make it work atm? [08:10] like that, as beginner with no knowledge on how to writ a script ? no. [08:11] Smurphy: ah okay. Thanks a ton ^^ [08:13] fouad: sorry... :} [08:44] how to join other channel [08:45] ex i need to join #net-snmp [08:49] nandhu: type /join #channel [10:38] My kdialog save dialog don't work anymore. Is this a known problem? For example, when I click 'Save As' in okular, I get a nice greyish (unresponding) save dialog. [10:45] hi [10:46] i need helps with my video setup [10:47] heyho [10:47] Howdo I make a workspace include BOTH my displays into one workspace? Only one screen is used atm [10:47] i has Nvidia drivers installed [10:55] #facebook-german [11:01] Hey all [11:01] Howdo I make a workspace include BOTH my displays into one workspace? Only one screen is used atm [11:01] hey BluesKaj [11:01] Nicekiwi_: systemsettings => display [11:02] Nicekiwi_: or krandr [11:02] peace: that dosnt work if you have Nvidia drivers installed. (I do) [11:02] hi Nicekiwi_ , peace [11:02] Nicekiwi_: so you need to use nvidia tool [11:02] i guess nvidia-settings from konsole [11:02] peace: that dosnt configure workspaces [11:02] BluesKaj: hey [11:03] Nicekiwi_: you want one desktop displayed on 2 screens right? [11:03] peace: I want one workspace displayed on 2 screens [11:03] that is configured via nvidia-settings [11:03] peace: no its not [11:04] ok [11:04] peace: what do you mean by desktop? [11:04] we had a guy who had 3 monitors running off nvidia , and for some reason the recommended driver did not send a video signal to any monitor ...very frustrating [11:05] ouch [11:05] BluesKaj: for those complicated stuff you need to edit the xorg.conf [11:05] peace: it was working before i upgraded my videocard, now the options to set it up arnt there anymore. [11:06] Nicekiwi_: downgrade the video driver [11:06] i dunno how to help you [11:06] peace: to what? [11:06] !nvidia| Nicekiwi_ [11:06] Nicekiwi_: For Ati/NVidia/Matrox video cards, see https://help.ubuntu.com/community/VideoDriverHowto [11:06] suspected a bad nvidia card at first...dunno what was wrong , never resolved the matter [11:06] peace: I removed the nVidia driver and Kubuntu refused to boot [11:06] Nicekiwi_: write some feed back to nvidia ... [11:07] the nouveau driver didn't load or did you blacklist it? [11:07] * peace uses intel video driver [11:07] peace: i think Linus' remarks about nvidia put that idea to sleep [11:07] BluesKaj: Ive used the Jocky tool, I havnt knowingly blacklisted nouveau [11:07] Nicekiwi_, pk [11:07] ok [11:08] jokey-kde [11:08] should be [11:08] :P same tribe [11:08] is jockey-kde [11:08] how do I remove the nvidia driver and fallback to nouveau? [11:09] !nvidia| Nicekiwi_ [11:09] peace: not helpful.. [11:09] i have to go now [11:09] bye [11:09] :( [11:09] k [11:10] drop to a tty , stop kdm , remove the diver , probly nvidia-current then startx, the nouveau driver should reload. Nicekiwi_ [11:10] hmmm ok.. [11:10] BluesKaj: btw, do you know howto kick nicekiwi to i can rejoin with my name in here? [11:11] so* [11:11] if kdm is running the driver is in use hence you can't remove it [11:11] actually nevermind about the kicking [11:11] Nicekiwi_, what ? [11:12] dw, i forgot i was logged in on both comps [11:12] is there any irc just for chatting bout nonsense? [11:13] CptJoe, #kubuntu-offtopic or if you prefer a whole lot more nonsense #ubuntu-offtopic , [11:13] lol [11:14] #ubuntu-offtopic has more users [11:14] BluesKaj: well.. it seems to have started with nouveau, but now what do I do? Last time i did this i couldnt been past grub [11:15] boot* [11:19] nicekiwi, run this , glxinfo | grep OpenG , you may have to install mesa-utils for that command to work [11:20] oops glxinfo | grep OpenGL [11:20] that is an info command , it looks at which graphics module is loaded [11:21] BluesKaj: ok, done [11:21] and what's the first line? [11:21] BluesKaj: 0_o.. apparently its using the VMware driver... [11:21] Vender String: VMware, inc [11:22] oh now you tell me yoiu're on VMware [11:22] BluesKaj: thats it, IM NOT!!! real hardware, intel cor2duo nvidia 550ti [11:22] etc.. :/ [11:24] nicekiwi, pastebin the output of the OpenGL pls [11:25] BluesKaj: http://pastebin.com/z8dLYFhQ [11:27] Nicekiwi_, try the command again, that was my fault , I dropped the L by mistake , glxinfo | grep OpenGL [11:27] BluesKaj: same result [11:28] OpenGL instead of OpenG ? [11:28] BluesKaj: yup [11:34] Nicekiwi_,well , looks like you xorg.conf is using the default graphics used by VMware ..I'm not familiar with that situation ..dealingf with VMware isn't in my aresenal [11:34] BluesKaj, my kdialog window never opens completely anymore; I have to terminate it. Do you know what that is? [11:34] BluesKaj: hmmm ive removed VMware driver, gonna restart x and see if it picked up nouveau [11:36] nicekiwi, you can try to locaye nouveau to make sure it's not in your blacklist file [11:36] locate [11:36] BluesKaj: hmm normal boot just froze just past grub again :( [11:36] kdialog window , aetoxx ? I'm not sure what you mean [11:37] BluesKaj, you get those when you try to save a document in any KDE application. [11:37] nicekiwi, can you get to a tty ,? [11:39] BluesKaj: not from that point no [11:40] aetoxx, you mean the dropdown dialog in the menubar ? for example when you click on "file"? [11:41] BluesKaj: how do i check if nouveau is blacklisted? [11:41] BluesKaj, no, I mean the component which shows a directory listing and where you can press 'save'. [11:41] nicekiwi, , got the live-cd or usb [11:41] nicekiwi, use the locate command [11:41] BluesKaj, the save file dialog. [11:42] BluesKaj, I think it runs in a separate process. [11:42] BluesKaj, called kdialog. [11:43] BluesKaj: ive booted into the UI in recovery mode with the VMware driver :/ [11:43] the command finds a lot of nouveau files [11:43] aetoxx, so you mean after editing a document , and saving [11:44] BluesKaj, for example. [11:44] BluesKaj, but for a pdf document no editing step is needed. [11:44] BluesKaj, so, it's just open pdf document in okular, press Save As and see it break. [11:45] nicekiwi, look for a file with blacklist in the list [11:45] BluesKaj: the xorg.conf file says nvidia is STILL the default driver :/ ive chnaged it to nouveau. [11:45] if it's not there then it's not blacklisted [11:45] BluesKaj: its not there [11:46] nicekiwi, if you can't get to a tty , how can you edit the xorg.conf file ? [11:46] BluesKaj: i said when I try to boot normally i cant, im in recovery mode atm [11:47] nicekiwi, you said you could n't get to grub [11:48] or past grub , now I recall , ok [11:49] BluesKaj: ya [11:50] BluesKaj: gah, still cant boot past grub :( [11:53] nicekiwi, back to the recovery kernel , run, modprobe nv, at the root prompt [11:58] BluesKaj: FATAL: module nv not found [12:01] nicekiwi, what's listed in jockey/additional drivers ? [12:04] Are bugs ever fixed based on number of votes? [12:05] BluesKaj: when I could get to it, only nvidia drivers [12:07] aetoxx, I followed your example , but I had no problems withe the save dialog [12:07] nicekiwi, install xserver-xorg-video-nouveau === olaf is now known as Guest14032 [12:08] BluesKaj, it seems the bug has already been reported: https://bugs.kde.org/show_bug.cgi?id=302295 [12:08] KDE bug 302295 in general "Unavailable NFS makes dolphin unusable" [Critical,Unconfirmed] [12:09] BluesKaj, I think some other bug is exactly the same and has >360 votes. [12:09] BluesKaj, that other bug is 3 years(!) old. [12:12] BluesKaj: grrr i cant install stuff :( === emma is now known as em [12:13] can you login with the recovery kernel , nicekiwi [12:13] BluesKaj: how do i do that? [12:13] aetoxx, which kubuntu version are you running [12:14] BluesKaj: i can get to root prompt, but it wont let me install stuff [12:14] BluesKaj, 4.8.90 is my KDE version [12:15] BluesKaj, but it has been a problem since forever. [12:15] BluesKaj: it keeps trying to load the graphics drivers and gets stuck [12:15] heh , 4.8.90 is in devel , one must expect bugs [12:17] nicekiwi, well , you seem to be getting hung by a faulty xorg,conf ... if possible , wipe it out ..probly affecting your nvidia driver [12:18] BluesKaj: nvidia drivers not installed atm [12:18] xorg.conf can help , but once it's corrupted it can be a real pain [12:19] do you have a livecd available , nicekiwi ..I asked before [12:20] BluesKaj: ive deleted the xorg.conf [12:20] how do i reconfigure the xserver? theres a command i cant htink of [12:20] BluesKaj: i do have an ubuntu disk somewhwhere [12:20] nicekiwi, yeah , hang on [12:23] sudo dpkg-reconfigure -phigh xserver-xorg, nicekiwi [12:24] BluesKaj: cheers :) [12:26] nicekiwi, or , sudo dpkg-reconfigure xserver-xorg , but I think this repairs an existing xorg.conf , and sets up a rudimentary file [12:27] BluesKaj: still dosnt boot properly on normal boot [12:27] nicekiwi, try a hard boot [12:28] BluesKaj: i have been [12:29] BluesKaj: damn it! its still using that VMware driver in recovery boot D: *RAGE* [12:30] BluesKaj: how do I remove it form the kernel? the packages arnt installed [12:30] short of a clean install without VMware , I can't think of anything else [12:30] or removing VMware [12:31] BluesKaj: VMware is NOT installed [12:31] I initially installed the OS inside VirtualBox, VMware was never used. [12:38] there must be some config files left over from previous vmware install [12:41] or VB is using the same driver as VMware , I don't know much about virtiuals as I said earlier , look like it mucked up your setup , nicekiwi [12:41] BluesKaj: :( defected form the start [12:42] why the VB , is it necessary for work ? [12:43] BluesKaj: no, i didnt have any blank DVDs to make a install disk or a USB drive. So I mounted the HDD in VirtualBox in my other computer and installed Kubuntu on it then put it back in my computer [12:44] worked until now :/ [12:45] well now different hardware was probly detected , hence the probs [12:45] BluesKaj: not reallly.. it still used the same driver and all :( just a newer nvidia card was added :( [12:45] I'm surprised it worked at all in your pc [12:46] BluesKaj: why? [12:47] not just the graphics , it may be some other problem with hardware the API is looking for [12:47] BluesKaj: :/ but nothing else changed... [12:48] BluesKaj: ive installed the Nvidia driver again and all is as it was before, but i still cant setup both screens to be one workspace [12:48] BluesKaj: one screen as one workspace on it and you can swap between its virtual workspaces, the other screen just has an empty workspace on it [12:51] nicekiwi, I don't know anything about multiple screens , the nvidia settings GUI should give some options in conjunction with your settings in dispay and monitor [12:53] I use a large screen monitor (our plasma tv) so I have no need or experience with multiples [12:55] maybe if you install , nvidia-settings-updates and nvidia-current-updates , you can keep witht changes without breakage , nicekiwi [12:55] BluesKaj: yeah... they dont offer the same things [12:57] nicekiwi, did you run sudo nvidia-xconfig or did you use the jockey to install the driver just now ? [12:58] nicekiwi, i never used nvidia drivers in Virtual Box, add guest additions and "Enable 3d acceleration" is ticked under Settings -> Display [12:59] multiple screens might work if the host can use 2 screens. [12:59] hello everyone [13:00] hi phoenix [13:00] BluesKaj: Jockey [13:00] hi phoenix_firebrd [13:00] OerHeks: hi [13:00] BluesKaj: hi [13:01] BluesKaj: but all is well now, i tried a diff option than i normall use in nvidia-settings and its doing what i want now :) [13:01] BluesKaj: thanks for all yr help :) [13:01] OerHeks: totally misunderstood what we were tlaking bout, but all g now. [13:02] oke, have fun [13:04] nicekiwi, heh , I was just told you don't need an xorg.conf file with multiple screens ."multiple screens should be supported by X.Org without the need for an xorg.conf" .over at #kde [13:04] BluesKaj: interesting... [13:05] nicekiwi, ok , dunno how much help I was , but you're welcome [13:05] anyways, 1am and TASpring at a ultrahigh gfx setting confirms GFX are working as they should. I bid thee Good Night. xD [13:05] u did well :) [13:06] g'nite nicekiwi === chachan_ is now known as chachan [15:27] fgfdg [15:27] dsfg [15:27] dfs [15:27] g [15:27] ds [15:27] administrator: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation. [15:27] g === administrator is now known as Guest99356 [15:27] ... [15:28] . [15:40] hi, is someone around who knows about sis graphics driver? [15:45] Tygar: I only know it exists and if I remember right, is old. [15:45] Tygar: so you might want to ask your actual question, someone might be able to help you. [15:48] i have a "harvested" barbone PC with onboard SIS graphics chip. the driver seems to work, but i get some weird horizontal lines flickering over the screen, especially when i move the mousecursor [15:49] i tried "NoAccel" "1" at the xorg.conf, but that didn't help, now i'm looking for some advice [15:50] und wenn jemand auf deutsch antworten könnte wäre ich extrem begeistert ^^' === jim is now known as Guest91399 === Guest91399 is now known as jmschramm [15:59] Tygar: you could try Option "DRI" "0" [15:59] Tygar: but I'm gone now, good luck === Porkman_ is now known as porkman [16:22] Lynoure: didnt work too :/ [17:01] hi, do anyone have any idea about httpfox? [17:02] c2tarun, idea?... what's the issue ? [17:02] c2tarun, idea?... what's the issue ? [17:03] BluesKaj: Please look at this thread http://ubuntuforums.org/showthread.php?t=2019402 this is my thread [17:04] can you help me with this. little bit of hint or any tutorial will also do. [17:06] BluesKaj: ping, there? [17:10] c2tarun, are on a router with access to settings, most routers have username and password store options [17:10] are you on a router [17:11] yeah I am on a router but that username and password setting are for router protection. [17:12] I want to write an script which can do automatic logon to my ISP. [17:12] no I mean access to internet settings that the ISP gave you when you installed the router [17:13] your internet service account setings [17:13] no we can't give username and password for my ISP to my router. I have to enter it manually each time I try to connect to my ISP. [17:13] BluesKaj: There are some systems like Cisco routers, or some semi-public wifi which bring you first to a webpage where you have to plug in a name/pass then it opens up the dns and lets you go elsewhere [17:13] no options for storing them in the router ? [17:14] yeah genii-around said right. I have to enter my username and password and then I can connect to internet. [17:14] BluesKaj: Not usually [17:15] c2tarun: Why not just tell firefox to remember your username and password for that site? [17:15] reminds me of dialup on windowes 95 [17:15] BluesKaj: Sort of the same, yeah [17:15] Plus a big problem is my ISP is pretty bad, it gets disconnected now and then, so I want to write an script that try to login to my ISP at an interval of every half an hour. so that in case I leave some big download. [17:16] genii-around: for that also I need to at least click the login button. [17:16] genii-around, interesting , what's your suggestion for a script ? [17:16] c2tarun: Wait.. is your ISP using dialup, or is some something like DSL/cable [17:16] BluesKaj: I'm thinking now he may have PPP dialup [17:17] genii-around: its a wi-fi connection. They have a modem at the roof which is connected to my lappy via a router. when I try to connect to any website first I have to enter a username and password and after that I can access Internet. [17:17] its a broadband connection. [17:18] yeah same here genii-around...iirc there used to be a small app that would would run when a browser was launched [17:19] what about network manager , can't it be configured to do some such [17:19] is it possible to access some data from httpfox and create a html request and then send it to my ISP's IP [17:20] BluesKaj: I dont think so. [17:30] Back [17:32] he left ...but it's hard to find an example on google that reflects his situation , genii-around [17:47] hi, i have a usb device that ubuntu thinks is a modem, but it actually isnt, and it keepts trying to use it as one and connect to it. does anybody know how i can tell it not to do that? [17:48] BluesKaj: Looks like he might need some method more like http://linux-journal.blogspot.ca/2005/04/curl-examples.html where it says "Sometimes your HTTP access is only available through the use of a HTTP proxy. This seems to be especially common at various companies. A HTTP proxy may require its own user and password to allow the client to get through to the Internet." [17:49] giantpune: What sort of device is it? [17:50] it is an android cell phone which is set to a special diagnostic mode. kubuntu is trying to set it up using cdc_ether [17:51] im trying to write my own driver for this diagnostic mode, but its really hard to debug with all the traffic kubuntu is creating as it tries to use it as a modem [17:56] eHm [17:57] giantpune, the phone is being recognized as an internet AP , it makes sense [17:57] Yes, usually that or mass storage device is what it will see phones as [17:58] giantpune: You're not using something like Eclipse and the ADB stuff? [17:58] no [17:59] is there just a simple way i can disable the CDC modem driver or give it the vid/pid and tell the network stuff in kubuntu never to try and use that? [18:00] I added my own wallpaper but after logout it resets back to the default one, if i use one which i got from "get more wallpapers" it wont reset [18:02] giantpune: Conceivably you can try to find it's vendor/device in /lib/udev/rules.d/ files and remove from or or blacklist [18:03] i want it in the udev rules, i just dont want it treated as a modem [18:03] Also i created shortcut to my other hdd but it disappeared aswell after logout [18:04] giantpune: Do you know what driver it is using ? [18:04] !blacklist [18:04] To blacklist a module, edit /etc/modprobe.d/my_blacklist.conf and add « blacklist » to the end of that list - To explicitly load modules in a specific order, list them in /etc/initramfs-tools/modules and type « sudo update-initramfs -u » [18:05] dmesg is spitting out a bunch of stuff with cdc_acm and cdc_ether [18:05] Aknot: Perhaps your desktop is loading a saved session which does not include the hd shortcut or new wallpaper [18:05] no, i just installed kubuntu and everything is default [18:05] and i checked that its set to restore previous session, not saved one === Jikan is now known as Jikai === Jikai is now known as Jikan [18:07] giantpune: cdc_ether seems to be a module but bot cdc_acm [18:15] giantpune: Something like: sudo lshw -C network might show you what driver the thing is using under the section that starts with "configuration:" [18:16] Apologies on lag, work is requiring me often right now [18:17] this is the relavent portion of the output. http://pastie.org/private/lcs1r96y659yaftulmug [18:17] theres also good ole eth0 and wlan, which are really internet devices [18:18] slm bu ubuntu 12.4un yenisi ne zaman ckıcak_?? [18:19] giantpune: Yes, so cdc_ether is what it's using. So just use the bots !blacklist info to blacklist that driver [18:22] ok, i added that line and disconnected/reconnected the phone and its still trying to use it as a modem. do i need to manually unload the module somehow? [18:27] giantpune: Yes...sudo modprobe -r cdc_ether === Anusko_ is now known as Anusko [18:30] woot. that seems to have fixed it. thanks [18:31] giantpune: You're welcome. Good luck with the debugging! [18:33] hello all [18:33] help me please [18:33] i would like install Skype from my PC [18:33] !skype [18:33] To install Skype on Ubuntu, see https://help.ubuntu.com/community/Skype - To record on Skype, check: https://wiki.ubuntu.com/SkypeRecordingHowto - Please use open protocols instead if you can, see !Ekiga [18:34] first sudo add-apt-repository "deb http://archive.canonical.com/ $(lsb_release -sc) partner" [18:35] and second sudo apt-get update && sudo apt-get install skype [18:35] end ? [18:37] qw_: echo "deb http://archive.canonical.com/ $(lsb_release -sc) partner" | sudo tee -a /etc/apt/sources.list.d/ubuntu-skype.list [18:38] qw_: Then after a sudo apt-get update should be available to install [18:47] Im trying to install ut2k4, i changed from properties to "is executable" but it says i dont have permission. In ubuntu it just asked for password, on kubuntu it doesnt [18:49] !info gimp > genii-around [18:50] ut2k4 has a linux version? awesome? [18:50] rly? [18:52] yes [18:52] so how do i give permission to it? [18:54] Aknot: Is it owned by the user who is trying to run it? [18:54] yes [18:57] ? [18:59] Aknot: I have not tried to run that before, just approaching the usual problems like wrong user or permissions, etc. [19:00] Aknot: Have you tried perhaps with kdesudo ? [19:00] what is that [19:00] ( although if it did not need gksudo under regular ubuntu likely does not need kdesudo ) [19:01] in ubuntu it asked for password when i put "allow executing" [19:01] here it just says no permission [19:02] Aknot: From konsole if you put ls -l filename ( where filename is the ut2k4 file ) what does it say? [19:03] lrwxrwxrwx 1 username username 36 Jul 9 21:59 linux-installer.sh -> /media/UT2004_CD1/linux-installer.sh [19:18] Aknot: since it's a symbolic link... what does ls -l /media/UT2004_CD1/linux-installer.sh say? [19:22] Does Windows run on XEN? Does it have 3d support then? How do I install xen? What GUI is the best for it when just wanting to have both system running at the same time? How do you switch between them? [19:24] Is there a better solution which does not require rebooting to switch? I have workstation, but it has no 3d support with radeon. It has with fglrx but fglrx makes my system incredibly unstable. [19:31] Hello. I'm having kwin performance problems when: scrolling windows, changing window focus, changing virt desktop--basically anytime lots of painting is happening. [19:32] I'm using the kubuntu proprietary nvidia driver with twinview. [19:33] Even if I disable all desktop effects (except the kwin show FPS) these operations are still slow. === ubuntu is now known as Guest9963 [19:33] hello, i would like to write a bash script which open a terminal and execute some commands [19:34] like "konsole -e cd/my path" [19:34] it doesn't work of course, any help ? [19:35] sekisushai: Try adding the --hold option to your konsole command. [19:36] Excellent ! thank mate :) [19:36] No problem. Have fun! [19:37] BluesKaj: i think i fixed the microblog issue [19:37] yofel_: are you there? [19:51] Combatjuan : it doesn't work at the end : konsole --hold cd mypath [19:53] Combatjuan: could you ask in #kwin [19:55] sekisushai: konsole is a terminal emulator, not shell. Try konsole --hold -e bash -c "cd some/path;....." [19:56] Daskreech: Certainly. Thank you. [19:57] sekisushai: What Jekyll said. I had done that before with -e ssh but failed to note that this worked because ssh is a shell, not just a command. [20:08] hum, the goal is to do a shortcut script to launch a bash program in a directory [20:09] so i need to have a terminal open [20:09] i would like to open a terminal in a directory using a command line [20:16] yofel_: are you there? [20:17] yes, but busy, anyting I can answer in 2 minutes? [20:17] *anything [20:17] yofel_: i have fixed the microblog bug [20:18] \o/ [20:18] yofel_: need some to test the patch [20:18] yofel_: also need someone to test a kmix patch [20:18] ah, can't do that now -> wednesday [20:18] yofel_: ?? [20:19] If you want me to test it it'll have to wait until the day after tomorrow, sorry [20:20] yofel_: can the two patches if approved in 2 days , can it make it to kde 4.9 final? [20:21] tagging for 4.9 final is the 25th, so I believe yes [20:21] yofel_: ok [20:22] yofel_: whats special about wednesday? [20:23] nothing, except that's the first day this week when I don't have a test in scholl the day after... [20:23] yofel_: :) === cham is now known as amar [21:43] codeblocks doesn't work on kubuntu [21:44] any help? [21:46] yo guys [22:17] "sudo make install" fails [22:17] with two errors [22:17] anyone knows possible reasons ? [22:29] amar, without you paste up the errors somewhere, no. [22:41] !pastebin | amar [22:41] amar: For posting multi-line texts into the channel, please use http://paste.ubuntu.com | To post !screenshots use http://imagebin.org/?page=add | !pastebinit to paste directly from command line | Make sure you give us the URL for your paste - see also the channel topic. === sTs_ is now known as ubu [22:52]