[01:25] <qwebirc58232> Hello. Name is Nelson Sanchez. I am new to Myth TV and Mythbuntu. As I test the system I can get it all to work when front and backend are in the same machine. When I try to access from another fronted, I can get a connection to the database, but not to the backend. I have tried to change from 127.0.0.1 to local host to 192.168.x.x to no avail. Any suggestions?
[01:26] <qwebirc58232> Thank you!
[01:56] <qwebirc58232> I figured it out.. Changed my.cnf binding address to 192.168..x.x and it worked. Now, I get audio but no video on the front end.
=== peterpops_ is now known as peterpops
[03:21] <neil2000> How can I configure 2 capture cards  Leadtek Winfast 2000 XP Expert & Hauppauge WinTV-HVR-950Q ? V4L Probe failed, drivers loaded.
[03:32] <neil2000> Hi, new MythBuntu with update but cannot configure 2 capture cards. Leadtek Winfast 2000 XP Expert & Hauppauge WinTV-HVR-950Q. MythTVBackend setup V4L probe failed! What next?
=== foxbuntu` is now known as foxbuntu
=== dekarl1 is now known as dekarl
[15:00] <innatech> So, having updated to 12.04 with fixes, I'm having problems w/my HD-PVRs. The same LiveTV channel changing problems others have mentioned, but also something strange with the capture resolution--much of the image appears to be cropped, and it looks low res. I think perhaps the HD-PVRs are tuning to the SD subchannel of a given DirecTV channel number?
[15:00] <innatech> Not sure what order I should go about testing things.
[15:00] <innatech> Any suggestions appreciated.
[15:07] <innatech> (that is, the receivers are tuning to the SD subchannel, which the HD-PVR captures.)
[16:13] <innatech> So....the directv_http.pl scripts on the wiki error out on 12.04....
[16:16] <tgm4883> innatech, errors?
[16:17] <innatech> Warning: Use of "-x-perl" without parentheses is ambiguous at ./directv_http.pl line 138
[16:18] <tgm4883> innatech, that isn't an error
[16:18] <tgm4883> you can tell, because it says "Warning" ;)
[16:19] <innatech> Well, this is: BEGIN not safe after errors-compilation aborted at ./directv_http.pl line 172
[16:20] <innatech> Something probably got mangled. I'll recreate it.
[16:20] <tgm4883> innatech, so I'm probably not going to be able to help you with perl errors. I'm definitely not going to be able to help you if you don't pastebin the entire output from running the command.
[16:21] <innatech> Yeah, before I make anyone do that I'll tinker a bit first.
[16:21] <innatech> Clearly something I've done b/c no one's complaining anywhere else.
[16:26] <innatech> Yep, something got mangled in the cut/paste. It's running now.
[16:27] <innatech> and working.
[16:45] <innatech> So-- fyi -- had to disable native resolution on my DirecTV receivers (HD-PVRs on D* H23s) to get proper recordings after upgrading to 12.04 + fixes.
[16:45] <innatech> Forcing everything to 1080i seems to have helped stabilize LiveTV.
[16:45] <innatech> Also moved channel changes to the network ctl, rather than USB serial.
[16:51] <innatech> On the upside, the memory allocation and driver recompiles I used to have to do to get the hvr1600 (cx18) to work properly seem to no longer be needed. Sweet!
[16:53] <innatech> Seems like I may need to create udev assignment rules for ht HD-PVRs and hvr1600, however, as they keep changing /dev/video* nodes at boot. Is that a known issue?
[16:53] <innatech> I don't recall needing to do that previously (on the same motherboard
[18:20] <innatech> So, went ahead and got udev rules working. However, I note that the channel guide is showing incorrect format information (e.g. SD badge on CNN HD) .... is that a schedulesdirect lineup problem?
[18:22] <innatech> Correction: the SD badge is incorrectly shown when switching inputs. If you change channels, or bring the info banner up, after the initial input switch then the correct format info shows.