| qwebirc56482 | I am having a problem installing my hauppauge TV tuners on Mythbuntu. I followed the instructions at http://robotbeard.com but I ran into some errors on one of the steps that is supposed to compile I think. | 01:30 |
|---|---|---|
| qwebirc56482 | The error is: implicit declaration of function 'kzalloc' [-Werror=implicit-funciton-delcaration] | 01:31 |
| Shadow__X | qwebirc56482: which tuner | 01:34 |
| qwebirc56482 | hauppauge 2250 | 01:34 |
| qwebirc56482 | ok, I just found out that I can skip that step. I missed a line when reading. But when continuing on the cards are not showing up. | 01:35 |
| Shadow__X | ok first which version of mythtbuntu are you using | 01:38 |
| Shadow__X | qwebirc56482: which version of mythbuntu are you using | 01:41 |
| Shadow__X | qwebirc56482: type lsb_release -a in terminal | 01:42 |
| qwebirc56482 | 12.04 | 01:43 |
| qwebirc56482 | I just downloaded and installed today | 01:43 |
| Shadow__X | ok so what steps did you follow | 01:45 |
| qwebirc56482 | for the install or the robot beard thing? | 01:46 |
| qwebirc56482 | I followed steps 1-3b on the robot beard and Front and backend install on the mythbuntu | 01:46 |
| qwebirc56482 | I rebooted and attempted step 4 on the robotbeard but the card didn't show up. | 01:47 |
| Shadow__X | when you install mythbuntu a frontend and backend are already installed | 01:47 |
| qwebirc56482 | I followed the wizard and that was pretty much all it asked me other than a remote. | 01:47 |
| qwebirc56482 | and username stuf | 01:48 |
| Shadow__X | ok well since you are using 12.04 the install is very easy | 01:48 |
| Shadow__X | http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-2200#Making_it_Work_Easily | 01:49 |
| Zinn | [linuxtv.org] Hauppauge WinTV-HVR-2200 - LinuxTVWiki | 01:49 |
| Shadow__X | and if you want just below that there is a link to use a gui | 01:50 |
| qwebirc56482 | gui would be good for me. I have no idea what I am doing. :) | 01:51 |
| Shadow__X | its ok just take your time and also it will be helpful to read the manual | 01:52 |
| Shadow__X | honestly, it will help alleviate many many new time installer mistakes | 01:52 |
| qwebirc56482 | ok, noob question... other than grabbing the files one by one how do I get the gui? | 01:58 |
| Shadow__X | ok go to the github site | 01:59 |
| Shadow__X | click zip and that will download all the files in a .zip | 01:59 |
| Shadow__X | once you have done that double click the .zip and that should extract it | 02:00 |
| Shadow__X | once you do that go to that folder in terminal and do sudo sh install.sh | 02:01 |
| qwebirc56482 | thank you I am working on that now. | 02:06 |
| qwebirc56482 | ok, I have the cards set up. Now I am not able to connect to the backend from the front end | 02:18 |
| qwebirc56482 | how do I tell the front end where to look for the back end? | 02:19 |
| Shadow__X | ok well first we need to make sure you setup the backend correctly | 02:30 |
| qwebirc56482 | ok, what do I need to do to verify? | 02:31 |
| qwebirc56482 | Thank you again for your help. I really do appreciate it. | 02:31 |
| qwebirc56482 | I basically took the defaults thru the general setup | 02:34 |
| qwebirc56482 | it had the 127.0.0.1 for the ip address but I changed that to my 192.168.1.70 address so I can connect another client to it. | 02:34 |
| Shadow__X | you should never put localhost or 127.0.0.1 for a backend that other machines will connect to | 02:38 |
| qwebirc56482 | that is fine. It is not set to that now. what other settings do you need to know? | 02:41 |
| Shadow__X | well did you actually setup the graphics card? | 02:42 |
| Shadow__X | http://www.mythtv.org/docs/mythtv-HOWTO-9.html start at general | 02:43 |
| Zinn | [www.mythtv.org] MythTV, Open Source DVR | 02:43 |
| qwebirc56482 | I installed the graphics driver | 02:45 |
| qwebirc56482 | Thanks! I didn't realize there was documentation on this. | 02:46 |
| Shadow__X | yes that is the mythtv site | 02:47 |
| Shadow__X | if you follow that it should have everything you need but if not ask here | 02:47 |
| qwebirc56896 | I'm trying to install mythbuntu 12.04 with an nvidia graphics card and no on-board graphics and I'm running into problems. All the help I've found online for this problem seems to revolve around using the on-board graphics instead of the nvidia card. Is there any other way around the problem? | 03:13 |
| Shadow__X | what problem are you having | 03:34 |
| qwebirc56896 | I get a half purple/half black screen if I try to do the default install. I edited the options to noquiet nosplash nomodeset, then I got an error: Kernel panic - not syncing: VFS: Unable to mount | 03:37 |
| Shadow__X | could you try to just use nomodeset also make sure you have ahci for your drives | 04:07 |
| qwebirc56896 | the nomodeset only seems to be working so far. Thank you!!! | 04:35 |
| Shadow__X | glad i could help | 04:35 |
| mal | can I login to my mythbuntu backend via putty? | 10:26 |
| === XDS2010__ is now known as k | ||
| === k is now known as XDS2010 | ||
| mdurkq | Free TV cards for anyone who can get this card - http://goo.gl/F7WBy - Working in Mythbuntu 12.04 - PM me if you're interested. | 14:43 |
| Zinn | [goo.gl] TerraTec Cinergy 2400i DVB-T - LinuxTVWiki | 14:43 |
| === _Metoer is now known as Metoer | ||
| === rhpot199` is now known as rhpot1991 | ||
| === hpeter_ is now known as hpeter | ||
| mdurkq | Free TV cards for anyone who can get this card - http://goo.gl/F7WBy - Working in Mythbuntu 12.04 - PM me if you're interested. | 23:05 |
| Zinn | [goo.gl] TerraTec Cinergy 2400i DVB-T - LinuxTVWiki | 23:05 |
Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!