[01:30] <qwebirc56482> I am having a problem installing my hauppauge TV tuners on Mythbuntu.  I followed the instructions at http://robotbeard.com but I ran into some errors on one of the steps that is supposed to compile I think.
[01:31] <qwebirc56482> The error is:  implicit declaration of function 'kzalloc' [-Werror=implicit-funciton-delcaration]
[01:34] <Shadow__X> qwebirc56482: which tuner
[01:34] <qwebirc56482> hauppauge 2250
[01:35] <qwebirc56482> ok, I just found out that I can skip that step.  I missed a line when reading.  But when continuing on the cards are not showing up.
[01:38] <Shadow__X> ok first which version of mythtbuntu are you using
[01:41] <Shadow__X> qwebirc56482: which version of mythbuntu are you using
[01:42] <Shadow__X> qwebirc56482: type lsb_release -a in terminal
[01:43] <qwebirc56482> 12.04
[01:43] <qwebirc56482> I just downloaded and installed today
[01:45] <Shadow__X> ok so what steps did you follow
[01:46] <qwebirc56482> for the install or the robot beard thing?
[01:46] <qwebirc56482> I followed steps 1-3b on the robot beard and Front and backend install on the mythbuntu
[01:47] <qwebirc56482> I rebooted and attempted step 4 on the robotbeard but the card didn't show up.
[01:47] <Shadow__X> when you install mythbuntu a frontend and backend are already installed
[01:47] <qwebirc56482> I followed the wizard and that was pretty much all it asked me other than a remote.
[01:48] <qwebirc56482> and username stuf
[01:48] <Shadow__X> ok well since you are using 12.04 the install is very easy
[01:49] <Shadow__X> http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-2200#Making_it_Work_Easily
[01:49] <Zinn> [linuxtv.org] Hauppauge WinTV-HVR-2200 - LinuxTVWiki
[01:50] <Shadow__X> and if you want just below that there is a link to use a gui
[01:51] <qwebirc56482> gui would be good for me.  I have no idea what I am doing.  :)
[01:52] <Shadow__X> its ok just take your time and also it will be helpful to read the manual
[01:52] <Shadow__X> honestly, it will help alleviate many many new time installer mistakes
[01:58] <qwebirc56482> ok, noob question...  other than grabbing the files one by one how do I get the gui?
[01:59] <Shadow__X> ok go to the github site
[01:59] <Shadow__X> click zip and that will download all the files in a .zip
[02:00] <Shadow__X> once you have done that double click the .zip and that should extract it
[02:01] <Shadow__X> once you do that go to that folder in terminal and do sudo sh install.sh
[02:06] <qwebirc56482> thank you I am working on that now.
[02:18] <qwebirc56482> ok, I have the cards set up.  Now I am not able to connect to the backend  from the front end
[02:19] <qwebirc56482> how do I tell the front end where to look for the back end?
[02:30] <Shadow__X> ok well first we need to make sure you setup the backend correctly
[02:31] <qwebirc56482> ok, what do I need to do to verify?
[02:31] <qwebirc56482> Thank you again for your help.  I really do appreciate it.
[02:34] <qwebirc56482> I basically took the defaults thru the general setup
[02:34] <qwebirc56482> it had the 127.0.0.1 for the ip address but I changed that to my 192.168.1.70 address so I can connect another client to it.
[02:38] <Shadow__X> you should never put localhost or 127.0.0.1 for a backend that other machines will connect to
[02:41] <qwebirc56482> that is fine.  It is not set to that now.  what other settings do you need to know?
[02:42] <Shadow__X> well did you actually setup the graphics card?
[02:43] <Shadow__X> http://www.mythtv.org/docs/mythtv-HOWTO-9.html start at general
[02:43] <Zinn> [www.mythtv.org] MythTV, Open Source DVR
[02:45] <qwebirc56482> I installed the graphics driver
[02:46] <qwebirc56482> Thanks!  I didn't realize there was documentation on this.
[02:47] <Shadow__X> yes that is the mythtv site
[02:47] <Shadow__X> if you follow that it should have everything you need but if not ask here
[03:13] <qwebirc56896> I'm trying to install mythbuntu 12.04 with an nvidia graphics card and no on-board graphics and I'm running into problems.  All the help I've found online for this problem seems to revolve around using the on-board graphics instead of the nvidia card.  Is there any other way around the problem?
[03:34] <Shadow__X> what problem are you having
[03:37] <qwebirc56896> I get a half purple/half black screen if I try to do the default install.  I edited the options to noquiet nosplash nomodeset, then I got an error: Kernel panic - not syncing: VFS: Unable to mount
[04:07] <Shadow__X> could you try to just use nomodeset also make sure you have ahci for your drives
[04:35] <qwebirc56896> the nomodeset only seems to be working so far.  Thank you!!!
[04:35] <Shadow__X> glad i could help
[10:26] <mal> can I login to my mythbuntu backend via putty?
[14:43] <mdurkq> Free TV cards for anyone who can get this card - http://goo.gl/F7WBy - Working in Mythbuntu 12.04 - PM me if you're interested.
[14:43] <Zinn> [goo.gl] TerraTec Cinergy 2400i DVB-T - LinuxTVWiki
[23:05] <mdurkq> Free TV cards for anyone who can get this card - http://goo.gl/F7WBy - Working in Mythbuntu 12.04 - PM me if you're interested.
[23:05] <Zinn> [goo.gl] TerraTec Cinergy 2400i DVB-T - LinuxTVWiki