[02:12] <GrueMaster> Also note that by default the port is wired as a null-modem, not as a standard PC serial port.  You will need a null modem adapter to connect to anything other than a PC.
[10:13] <angs> I run ubuntu on beagleboard-xm (uname: Linux beagleubuntu 3.2.0-26-omap #41-Ubuntu Thu Jun 14 18:19:55 UTC 2012 armv7l armv7l armv7l GNU/Linux). I am trying to install Qt-SDK on it, however it does not complete to installation. does anyone know if I can install SDK on ubuntu-arm?
[10:16] <ogra_> #41 ?!?
[10:16] <ogra_> wow
[10:20] <ogra_> angs, did you use the qt-sdk package or something self knitted ?
[10:20] <ogra_> the package should just work fine
[10:21] <angs> ogra_: I used ubuntu software center to install it
[10:22] <angs> I have not used the terminal to install the package. I will try it on the terminal
[10:22] <ogra_> wow, thats brave on a 512M system
[10:23] <angs> I got this error http://paste.ubuntu.com/1204476/
[10:24] <angs> could you tell me how I can fix it?
[10:24] <ogra_> sudo apt-get update
[10:24] <ogra_> and then try again
[10:25] <ogra_> your local package lists are out of date
[10:26] <angs> now it is updating, thanks a lot for your help
[10:26] <ogra_> np
[12:53] <angs> I have ubuntu desktop on a beagleboard-xm. I installed qt-sdk however Qt-creator cannot find the target device. Does anyone know how I can make Qt-Creator work on the beagleboard-xm?
[12:55] <suihkulokki> a
[12:55] <ogra_> b
[13:29] <angs> where can I find the tool chain for beagleboard-xm?
[13:55] <ogra_> angs, sudo apt-get install build-essential
[13:57] <angs> thank you ogra_
[14:16] <angs> I would like to install a SDK to compile my code on the board, what SDK would you suggest me use for beagleboard-xm? I tried to use Qt-creator, however it gives error for qmake and toolchain. I would appreciate for any recommendation.
[14:57] <XavB> rsalveti: ogra_: Hi, I would like to rebuild or copy wayland 0.95.0-0ubuntu1 from quantal RELEASE into or TI trunk PPA. Is there an way to do that?
[14:58] <rsalveti> XavB: for precise?
[14:58] <XavB> rsalveti: tep
[14:58] <XavB> yrp
[14:58] <ogra_> heh
[14:58] <ogra_> pyr
[14:58] <XavB> sorry, problem with my fingers...
[14:59] <ogra_> XavB, technically it shouldnt be a prob (though i dont exactly know how atm)
[14:59] <XavB> ogra_: that's exactly my question... ;)
[14:59] <rsalveti> guess the easiest way is just to push the src package for precise (changing series at changelog)
[14:59] <rsalveti> copying from launchpad (from the ubuntu archive) is something I'm not sure how to do
[14:59] <XavB> I do have that already, but I was wondering if there were a cleanest way...
[15:00] <ogra_> i guess there is a way to pocket-copy from release to a ppa
[15:01]  * ogra_ bets infinity knows how 
[15:01] <rsalveti> maybe with lp api
[15:01] <ogra_> yeah
[15:01] <ogra_> but i dont know the runes
[15:07] <XavB> ogra_: rsalveti: don't worry I will update changelog and push on precise
[15:13] <ppisati> ogra_: i just dd-ed today's daily on my quantal/omap4 but i've no video output
[15:13] <ppisati> ogra_: during bootup i saw the spash screen
[15:14] <ppisati> ogra_: but the installer never came up
[15:14] <ogra_> ppisati, hmm
[15:14] <ogra_> anything on console ?
[15:14] <ppisati> no
[15:14] <ppisati> Uncompressing Linux... done, booting the kernel.
[15:14] <ogra_> no, i mean on the tty
[15:14] <ppisati> no no
[15:15] <ppisati> black screen
[15:15] <ogra_> no tty's at all ?`
[15:15] <ppisati> uhm
[15:16] <ppisati> let me change preEnv
[15:16] <ogra_> hmpf, you should at least be able to switch to a tty
[15:17] <ppisati> i switched
[15:17] <ppisati> tty was there
[15:17] <ppisati> and when i rebooted i saw again the spaslh screen
[15:17] <ppisati> can i enable console=ttyO2?
[15:17] <ogra_> k, so you could debug it
[15:18] <ppisati> or am i going to vreak it?
[15:18] <ogra_> should work, yeah
[15:18] <ppisati> ack
[15:18] <ppisati> i';ve a new kernel
[15:18] <ogra_> awesome
[15:18] <ppisati> but i would like to test it with Q first
[15:18] <ogra_> you didnt inject it to this image i hope :)
[15:18] <ppisati> no no
[15:18] <ogra_> :)
[15:18] <ppisati> it's vanilla's today daily
[15:19] <ppisati> btw
[15:19] <ppisati> "vram=40M mem=456M@0x80000000 mem=512M@0xA0000000"? do we still need this stuff?
[15:19] <ogra_> no, i have to remove it
[15:19] <ppisati> no no
[15:19] <ppisati> they are there
[15:19] <ogra_> and it is gone anyway after install
[15:19] <ogra_> yes, i know
[15:19] <ogra_> i need to remove them in debian-cd
[15:20] <ogra_> they dont do any harm
[15:20] <ogra_> (and are gone fater install)
[15:20] <ogra_> *after
[15:23] <ppisati> my lcd turns on, but i've no outpu
[15:23] <ppisati> t
[15:23] <ppisati> crap
[15:23] <ogra_> patient :)
[15:23] <ogra_> plymouth turns black utomatically if console= is set
[15:24] <ogra_> give it some time
[15:25] <ogra_> and try to switch to a tty again
[15:25] <ogra_> sounds like an xorg specific issue
[15:26] <ppisati> ah!
[15:26] <ppisati> a switch to tty0 and back gave me the installer
[15:26] <ogra_> aha
[15:27] <ppisati> you are THA HACK!1100!1ER!!!
[15:27] <ppisati> :)
[15:27] <ogra_> haha
[15:48] <GrueMaster> Grrr.  Looks like someone is trying to profit from win32image writer.  http://www.hackintosh-it.net
[15:48] <ogra_> well, isnt it gpl ?
[15:49] <GrueMaster> Yes
[15:51] <prpplague> GrueMaster: hehe, i am too lazy to google translate, got a summary?
[15:51] <ogra_> they picked it and rebranded it
[15:51] <GrueMaster> No.  Just was sent an email alerting me to it.
[15:52] <ogra_> (there is a screenshot with a tool that has a usb sick on it)
[15:52] <GrueMaster> I'm  investigating it now.
[15:53] <GrueMaster> maybe ppisati can peek at  the site?
[15:53] <ogra_> ah, indeed, he surely understands it
[15:55] <ogra_> meeting over ...
[15:55]  * ogra_ drives on ... 
[16:23] <ppisati> rsalveti: i keep getting costant crashes with compiz now
[16:23] <rsalveti> ppisati: with the new kernel?
[16:23] <ppisati> rsalveti: one sec
[16:23] <rsalveti> ppisati: mind sharing your git tree and packages, if you have then?
[16:23] <ppisati> rsalveti: yes
[16:23] <rsalveti> *them
[16:24] <ppisati> rsalveti: http://kernel.ubuntu.com/git?p=ppisati/ubuntu-quantal.git;a=shortlog;h=refs/heads/ti-omap4
[16:25] <ppisati> rsalveti: http://people.canonical.com/~ppisati/linux-image-3.5.0-210-omap4_3.5.0-210.16_armhf.deb
[16:27] <rsalveti> ppisati: mind sharing the headers as well?
[16:27] <rsalveti> ppisati: that's interesting, it's exactly the same as my own kernel tree
[16:28] <rsalveti> unless you rebased it with some other changes
[16:30] <ppisati> rsalveti: right
[16:30] <ppisati> rsalveti: does it screw up in your setup too?
[16:31] <rsalveti> ppisati: didn't test yet, just looking at the git log
[16:32] <rsalveti> I need the headers as well for dkms to work properly
[16:34] <ppisati> rsalveti: http://people.canonical.com/~ppisati/linux-headers-3.5.0-210-omap4_3.5.0-210.16_armhf.deb
[16:34] <rsalveti> ppisati: thanks, will give it a shot
[16:34] <ppisati> rsalveti: ack
[18:17] <janimo> marvin24, ogra_ so did you get to test the newest nvidia kernel+l4t? Is is stable on 12.04 ?
[21:10] <dioxin> is there an image available for the beaglebone from Ubuntu?
[21:19] <GrueMaster> dioxin: Not that I am aware of.  beaglebone needs a different kernel.  Other than that, the rest of ubuntu should work.