=== pete_ is now known as Guest10496 === pete_ is now known as Guest60517 === Vito is now known as Vito_away [01:42] السلام عليكم [03:36] kok tidak ada yg ngobrol to === pete_ is now known as Guest56930 === c_smith is now known as c_smith-away === c_smith-away is now known as c_smith-afk [05:06] hello, does anyone know about connecting Samsung Galaxy S3 to Kubuntu 12.10? It isn't working here... [05:07] via MTP I would assume [05:07] try airdorid [05:10] ok thanks [05:11] heoyea_: airdroid does not seem to be in the Kubuntu repositories [05:12] Roey: andorid market place [05:13] Roey: if you want to use MTP rather than MSC, then you'll need the (currently experimental) kio-mtp package from the Kubuntu experimental PPA https://launchpad.net/~kubuntu-ppa/+archive/experimental [05:14] how can I activate my bluetooth? [05:16] hmm [05:16] heoyea_, tsimpson: I'm installing aidroid now. THe idea of logging into the phone via wifi appeals to me. what's the effective difference between MTP and MSC? [05:17] the main advantage from my perspective, is that MTP doesn't "lock" the SD card so the apps installed to SD are still available for use [05:18] Roey: wireless vs wires [05:18] but MTP doesn't necessarily give you access to the entire SD card [05:19] ok [05:19] tsimpson: ok so.. I just want to be able to use this as a mass storage device [05:19] this airdroid seems to be its own almost desktop environment for the phone [05:19] christ.. [05:20] yeah, airdroid is fun [05:20] ok [05:20] I just use MSC mode most of the time though [05:20] I still want to be able to access it via dolphin [05:21] why the fuck did they take out the mass storage option out of android 4.0 [05:22] Hello, all. After digging around the internet for a while, I haven't been able to find a fix for this networking issue I'm suddenly having. So, I'm hoping someone here might know what's going on? [05:22] I still have it, but I think it may be an xperia extension [05:22] I hit "cancel" when asked to setup a KWallet password and now I have no networking at all. [05:22] Wireless and wired networking was working perfectly before that. Any ideas? [05:24] ek: maybe reset ur kwallet [05:25] anyone know? [05:25] heoyea_: I'll give it a shot. [05:25] datruth: think u can install blueman for bluetooth [05:25] tsimpson, so I am trying to "download" this .zip of photos off my SD card through this Airdroid tool.. and when I unzip it I only see three photo files. [05:25] and not, like, 345. [05:26] hmm, I've never seen that before [05:27] make sure to check all the photo then download as zip [05:27] I did check all of them :P [05:27] heoyea_: There is no kdewallet.kwl file in my user's ~/.kde/share/apps directory. Perhaps I just need to set one? [05:28] heoyea_: how can I turn on the bluetooth controller? [05:28] ek: yea u can make a new 1 if u wish [05:28] datruth: u gotta sync it 1st [05:28] ? [05:29] heoyea_: Currently looking for a way to do this... [05:29] datruth: on ur remote there should be a sync button then ur pc should see it [05:29] datruth: assuming ur pc has bluetooth [05:30] heoyea_: how can I turn on bluetooth on the pc? [05:30] ek: think is in the kwallet options somewhere [05:30] datruth: with the blueman app [05:31] blueman doesn't start [05:31] :( [05:31] datruth: maybe ur pc dont got bluetooth [05:31] it does [05:32] datruth: try restarting it sudo /etc/init.d/bluetooth restart [05:35] same [05:43] oh well no bluetooht for me ;/ [05:45] is SIR_Taco about? [05:53] heoyea_: I found the kwallet settings and such in "Account Details" for my user. But, there is no mention of setting a password for it. [05:53] This is driving me insane. Why would not setting an initial KWallet password turn off all my networking?! [05:54] wow so if bluetooth is disabled in windows its disabled in ubuntu and the only way to enable it is to enable it back in windows? [05:54] how can I enable/disable the bluetooth adapter in Ubuntu? [05:54] err Kubuntu* [05:54] can anyone help me set up quassel-core and quassel-client? [05:54] I get an error that i cannot create a user [05:56] unheeding: try it with 'sudo'. [05:59] i've tried it with sudo [05:59] even created a quassel user apparetly [06:01] unheeding: is the error just one line? [06:07] yes [06:07] unable to add user: [06:07] i tried going on the website for special ubuntu instructions,, but i get the same error [06:08] unheeding: what is the command which generates the error? [06:08] sudo quasselcore --add-user [06:09] it promts for the username, then password twice [06:09] either says "passwords don't mathch" or "Unable to add user" [06:12] unheeding: try specifying the config dir: quasselcore -c /var/lib/quassel --add-user [06:18] that'd be me [06:18] i had to configure it using the client === dniMretsaM is now known as dniMretsaM_away [06:20] good job me === unheeding_ is now known as unheeding [06:38] Hrm. Even using the flash drive to "Try Kubuntu" it is doing the same thing. This is very strange to me. === sev_ is now known as el_wero === pete_ is now known as Guest69113 === pjoe_afk is now known as pjoe === Tonio__ is now known as Tonio_aw [08:36] Maybe some of you guys are used curlftpfs and can littlebit help. curlftpfs returned Access denied: 530 why? === james is now known as Guest21100 === kubuntu is now known as Guest23731 === pete_ is now known as Guest17444 === pjoe is now known as pjoe_dj === thelionroars is now known as thelionsleeps === thelionsleeps is now known as thelionroars [11:44] why touch of kubuntu on nexus 7 works only for some time ? [11:44] i have 4.9.80 === Tonio_aw is now known as Tonio__ [11:48] Hello anyone! Who know, why don't working wi-fi in kubuntu 12.04? in 12.10 - all ok, but in 12.10 don't normally work GPU driver :( in wicd always: validating autorization [11:49] кстати, наши есть? [11:51] what ? [11:51] that makes no sense [11:51] you're complaining about wifi, but then referencing a GPU driver [11:54] cortexA9: sounds like bug 1068994 [11:54] Launchpad bug 1068994 in ubuntu-nexus7 "button1 gets stuck after a while" [Critical,Confirmed] https://launchpad.net/bugs/1068994 === Tonio__ is now known as Tonio_aw === Tonio_aw is now known as Tonio__ [12:14] hello every one [12:19] I was having kubuntu installed in the entire disk, and I resized my disk letting a 26G to install debian on It, and I did It but failed to Install grub, so I ignored this step knowing that It is possible to configure the allready installed one for kubuntu, but I don't know how to make an entry for debian on It, please tell me how to do It :) === Tonio__ is now known as Tonio_aw [12:27] Recently my computer started misbehaving. When I unlock my screen, sometimes the unlock dialog box where you enter password stays even after it unlocks. I can continue working, but the dialog stays behind...? [12:27] I am forced to log out and back in to correct... a pain [12:29] JuJuBee: that sounds like it's worth logging a bug for [12:29] OK, wasn't sure if it was already known... [12:31] (·.·)/ [12:33] ikonia: not sure how to file... it isn't really an app that is running but unresponsive.... [12:36] JuJuBee: the app, afaik, is kscreenlocker [12:36] JuJuBee: you should probably be able to kill it instead of logging out to work around the bug for now [12:38] Torch: ps aux | grep kscreenlocker returns nothing [12:38] JuJuBee: no idea, i don't use it or work on it === yofel_ is now known as yofel [12:39] Torch: thanks anyway. Im filing using "I don't know package name" [12:40] !grub2 | hydron: this has some information. First try to just run update-grub and see if os-prober detects debian, if not you might have to create a custom entry in /etc/grub.d/40_custom [12:40] hydron: this has some information. First try to just run update-grub and see if os-prober detects debian, if not you might have to create a custom entry in /etc/grub.d/40_custom: GRUB2 is the default Ubuntu boot manager since 9.10 (Karmic). Lost GRUB after installing Windows? See https://help.ubuntu.com/community/RestoreGrub - For more information and troubleshooting for GRUB2 please refer to https://help.ubuntu.com/community/Grub2 - See !grub1 for releas [12:40] ok, thank you very much :) [12:43] cool, I think It found It, I'll reboot now to see :D === Quintasan_ is now known as Quintasan === cryptfu_ is now known as Guest37824 === thelionroars is now known as thelionsleeps [13:08] Hey all === Tonio_aw is now known as Tonio__ === thelionsleeps is now known as thelionroars === Tonio__ is now known as Tonio_aw === Tonio_aw is now known as Tonio__ === Mamarok is now known as Mamarok_ === Mamarok_ is now known as Mamarok__ === Mamarok__ is now known as Mamarok [14:09] !plasama [14:09] !plasma [14:18] I installed 12.10 on my PC and for some reason I don't have any sound. I opened alsamixer in Konsole, and the "Master" was muted. I tried to unmute it, but it keeps jumping back to mute after about a second. Anyone know why this would be happening? Everything worked great out of the box in all prior versions of Kubuntu. Audio device: NVIDIA Corporation GF108 High Definition Audio Controller [14:19] AceKing: mm with sudo alsamixer ? [14:19] AceKing: creating a new user to test? [14:19] AceKing: your user is in audio group ? [14:20] Peace-: Ok, I didn't try sudo alsamixer [14:20] Peace-: I am the only user [14:20] AceKing, check your kmix (speaker icon) on the left side of the panel in the system tray , make sure it isn't muted [14:20] First thing I would do is go into system settings>multimedia>phonon, and check which device if preferred [14:20] BluesKaj: It is not muted. That was the first thing I checked [14:20] thelionroars: OK [14:20] try changing the device order, and use test to test [14:21] *for 'audio playback' [14:23] ok AceKing` open system settings>multimedia>phonon>device preference , check the options there and" test" them [14:23] thelionroars: OK, I went into phonon and tested both devices listed. Neither worked [14:24] BluesKaj: I just did and neither worked [14:24] yeah , I got that [14:24] all=> gui stuff is not the best way to test tha stuff [14:24] alsamixer is the best stuff you should use to test your audio problme [14:24] then do what you want [14:24] which audio chip is listed in alsamixer [14:24] AceKing,^ [14:25] BluesKaj: I'm getting that now [14:26] BluesKaj: Realtek ALC892 [14:26] Peace-: I opened alsamixer using sudo, and still could not unmute. [14:27] AceKing: what do you use to unmute ? [14:27] M on the keyboard [14:27] mm ok so this is not a good stuff to hear [14:28] AceKing: ok press F6 [14:28] OK [14:28] AceKing: can you select another sound card ? [14:28] AceKing, sudo modprobe snd-hda-intel [14:29] Peace-: Yes, but neither works [14:29] AceKing: ok select the other card [14:29] AceKing: screenshot please after you did that selection [14:29] ok , I'm out of this discussion ,. too m any cooks ...godd luck [14:29] BluesKaj: that did nothing [14:30] BluesKaj: it just came back to the prompt [14:30] AceKing: sure it did that [14:30] good AceKing it's not supposed to , if there was no outpiut then that's the correct driver...you have to reboot [14:30] AceKing: it was loading the intel driver [14:31] BluesKaj: why ? [14:31] sudo rmmod module is enough [14:31] Peace-: should I run sudo rmmod? [14:32] Peace-, because alsa doesn't always reload prperly after a modprobe [14:32] BluesKaj: so sudo alsa force-reload [14:32] no that doesn't always work [14:32] BluesKaj: well you are not a luck man then :) [14:32] :P [14:33] ok , you guys do your thing , I'm not going to argue ..rebooting works for sure that's been my experience [14:33] AceKing: sudo adduser $USER audio [14:33] BluesKaj: true true [14:33] Peace-, a luck man ? [14:34] Peace-: did it [14:34] AceKing: try to see if you can change anything in alsamixer [14:34] BluesKaj: lucly [14:34] uff [14:34] luckly man [14:35] AceKing: if not reboot [14:35] Peace-: rebooting [14:36] Peace-, I mean my experience with others audio reloading alsa , not my [14:36] 'err mine [14:36] BluesKaj: i knew you are right :) but before rebooting i would try that [14:36] but yea sudo alsa force-reload not everytime work [14:37] mm [14:37] maybe it's correct to say but yea sudo etc doen't work everytime [14:37] Peace-, yeah , that command works sometimes [14:38] it might be a pulseaudio "thing" too [14:38] BluesKaj: can you tell me which one is correct ? :)) [14:39] correct? [14:40] there is no way of knowing for sure [14:40] #Trivial_para_novatos [14:40] rebooting will work for sure if you load the right driver withj modprobe , that'e what can say is correct [14:41] BluesKaj: i mean my sentences [14:41] OK, rebooted and still no sound. Went into alsamixer and tried unmuting... same thing [14:41] meant BluesKaj [14:42] AceKing: mm try this but .. i will say that it will not work [14:42] AceKing: sudo pkill pulseaudio [14:43] Peace-: didn't work [14:43] AceKing: notebook ? [14:43] Peace-: No, PC [14:43] mm i will fill a bug [14:44] OK [14:44] Peace-: It's weird that everything worked fine in previous versions [14:44] AceKing: ah dont' think that [14:44] AceKing, install pavucontrol , then setup the inputs and outputs similar to what is listed in the phonon devices [14:44] with my alc861vd i had a lots of problem for several releases [14:45] !pavucontrol | AceKing [14:45] BluesKaj: OK [14:45] AceKing: the last thing [14:46] AceKing: speaker-test on terminal [14:46] is there anyway to get the desktop effect "make desktop snow" back, used to be my previous kubuntu, using 12.10 now [14:47] natman: dunno maybe a driver problem , i mean video card [14:47] or a problem with kwin [14:48] natman: tried with xrender instead of opengl ? [14:48] Peace-: is the option there for everyone else? [14:50] BluesKaj: OK, I installed and opened it. It shows HDMI / DisplayPort and a red x through the speaker. Dropdown menu has no other options, and can't unmute [14:51] BluesKaj: the problem is alsa not pulse [14:51] BluesKaj: My mistake, I see the red x is always there.. I can mute and unmute [14:53] AceKing: so it's working now ? [14:54] Peace-: I just went in pulse audio and fooled around with the hardware. Low and behold it is now working! [14:55] Peace-: BluesKaj: I want to thank you both for your help! [14:55] wtf this pulse bah [14:55] btw i did sudo pkill pulseaudio [14:55] tone it down please Peace- [14:55] :S [14:56] ikonia: ok bye man [14:56] thanks [14:56] i don't like pulseaudio much but the pavucontrol helps als direct the audio to right outputs on some sound cards [14:56] alsa [14:57] BluesKaj: That definitely did the trick. Thank you again, and thanks for sticking with me [14:57] np AceKing , glad to help :) [14:57] how to set up modem mobile broadband in kubuntu ? please help . matur suwun sakderenge [14:59] BluesKaj: does KDE actually depend on pulse audio for it's sound system ? [14:59] abuumayra, please explain your "modem mobile broadband" [15:00] ikonia, in my experience yes , lately it's become more and more the case with the latest KDEs and OSs [15:02] I can run without pulseaudio , but I have no audio on websites that use flash , ikonia [15:12] advan hspa usb modem === Vito_away is now known as Vito === pjoe_dj is now known as pjoe [15:49] ... === spawn[dead] is now known as spawn57` === pjoe is now known as pjoe_afk [16:42] does anyone have the "snow" option in desktop effects on Kubuntu 12.10? [16:46] can't see === dniMretsaM_away is now known as dniMretsaM === Tonio__ is now known as Tonio_aw === Tonio_aw is now known as Tonio__ === Tonio__ is now known as Tonio_aw === Tonio_aw is now known as Tonio__ === aurelien is now known as Guest3856 [18:23] hi all :) [18:23] hey Linusnewb [18:23] How do i move the bottom panel to the top? [18:23] click on the far right corner of the panel [18:23] it will open up the configuration [18:23] click on "Screen edge" and drag it to the top [18:24] thanks, just moved from ubuntu 12.10 unheeding [18:24] :) [18:24] welcome to awesomeness [18:24] make sure to turn on all the desktop effects if you have a decent computer [18:24] yes it is [18:24] ok i did that but after restart it was still enabled [18:25] opp my bad you said turn on, i got it [18:25] np [18:26] I have an USB 3g modem Zte Onda.. but problem to connect can anyone help me [18:27] I have installed usbmodeswitch proberly and have the correct vendor and target ID [18:29] but wvdial won't connect :( [18:30] I have fresh installed kubuntu12.10 from live dvd [18:36] have no one any idea? [18:42] any good tutorials on kubuntu 12.10? [18:43] like? [18:44] configuration settings [18:44] so i can get a little familiar with this desktop [18:45] check youtube [18:45] ok thanks === pjoe_afk is now known as pjoe [19:03] ? === spawn57` is now known as spawn[dead] === TraumDieb is now known as Guest39555 === dniMretsaM is now known as dniMretsaM_away === klehmann is now known as LeniLenin [20:15] whiskey wonka... hehehe === Tonio__ is now known as Tonio_aw === dniMretsaM_away is now known as dniMretsaM === achim is now known as Guest77188 [20:47] !netsplit [20:47] netsplit is when two IRC servers of the same network (like freenode) disconnect from each other, so users on one server stop seeing users on the other. If this is happening now, just relax and enjoy the show. See http://en.wikipedia.org/wiki/Netsplit === Subfusc_ is now known as Subfusc [20:51] Hi, how can I unlock my screen from a terminal? [20:51] i.e. ssh or a script [20:53] Kottizen: You can use xdotool to simulate a login. [20:54] salut tous [20:56] lordievader: wonderful, cheers! :) [20:58] Kottizen: It is wonderful indeed :) [20:58] hi i cant get the nvidia drivers run correctly. i stuck with a resolution of 640x480. xorg.log says this http://paste.ubuntu.com/1430509/ [20:59] so im not sure if it is a xorg.conf problem or some driver issues === unheeding_ is now known as unheeding === pjoe is now known as pjoe_afk [21:32] I have Ubuntu+KDE. Should I be posting in the Ubuntu channel instead? [21:33] And not a single person to hear my cries. [21:33] doesn't really matter, since kubuntu is basically ubuntu with kde [21:33] Hence the question. [21:33] is it a kde specific issue? [21:33] or what seems to be the problem? [21:34] Not so much an issue or problem. [21:35] I've been looking all around on how to specifically keybind the application launchers on my launcher tray. [21:35] Every solution that I found requires scripting. [21:36] well the system tray is dynamic, so yeah it will probably require some scripting to do properly [21:37] So my best bet would be to have a keybinding combination that just launches the application in general then? [21:37] yeah, if it has a system tray icon it should simply restore it anyway on a launch command [21:43] Okay. I'll just RTFM some more then. Thank you for your help. === jussi01 is now known as jussi [22:07] #kubuntu-offtopic [22:07] oh shi- === liot is now known as liot_absent === liot_absent is now known as 18WACKE6F [22:22] ohai [22:23] since upgrading to 12.10 my laptop doesn't go to sleep anymore automatically :( [22:23] even though it's configured to do so in the power management setting.. [22:23] i wonder what i should look at to debug this.. [22:25] putting it to sleep manually works just fine (e.g. closing the lid) === Tonio_aw is now known as Tonio__ === Tonio__ is now known as Tonio_ === Tonio_ is now known as Tonio_aw === Tonio_aw is now known as Tonio_ === Tonio_ is now known as Tonio_aw