[00:09] So are there N7 builds yet? I'm tempted to try Plasma Active on my Nexus 7, but I don't want to have to fiddle around with removing all the Ubuntu/Unity/Gnome stuff. I mean, I'll do it if need be, but pre-built images would be great. === andrew is now known as Guest24709 === len is now known as Guest19426 [01:51] Hi. My alt key is doing nothing with the "at" and the "euro" signs on the "2" and "3" keys. I can't type those signs. I tried several keyboard layouts, hardware, etc, without success. But before it used to do it. I don't know what happened. Any idea? Thanks [02:01] 2 [02:05] Hi. My alt key is doing nothing with the "at" and the "euro" signs on the "2" and "3" keys. I can't type those signs. I tried several keyboard layouts, hardware, etc, without success. But before it used to do it. I don't know what happened. Any idea? Thanks === V is now known as SATAN === SATAN is now known as Guest24219 === Guest24219 is now known as V [03:25] I want to try gnome 3, but have kubuntu. Will following these steps: http://www.webupd8.org/2012/10/how-to-get-complete-gnome-3-desktop-in.html break something? [03:29] urlwolf: You're unlikely to get an answer here. We're KDE folks, not GNOMEs. I can say that you can install the ubuntu-desktop package and switch between desktop environments as you wish without problems. [03:30] thanks [04:02] anyone rock climb? [04:03] i've always wanted to try [04:03] its a pretty great sport, i've been climbing about a year now. i'd never done it before and just looked up a gym in the area to give it a try. [04:08] oh, i've been to a rock gym a few times. very fun [04:43] My laptop running kubuntu 12.10 with the 4.10-RC and edgers ppa seems to lock the cpu at its highest scaling after waking from sleep. === jacob_ is now known as Guest12934 [06:48] hohoho! Merry Cristmas! [07:22] UberDuper: can you figure out which process does that? [07:23] UberDuper: the usual suspects are kded, kmix and nepomuk === abhishek is now known as abhishek_ === abhishek_ is now known as abhishek__ === Taggnostr3_ is now known as Taggnostr3 [08:40] hi [08:40] somehow my kuuntu desktop loks itself every few seconds [08:40] while Im using it [08:41] the screen turns black and when I move the cursor I have to re enter my key [08:45] and now it stopped locking itself... [08:47] what version of kubuntu? === pjoe_afk is now known as pjoe === pjoe is now known as pjoe_afk === pjoe_afk is now known as pjoe_dj [09:29] Hi all. Can someone please tell me how to make my PC + WLAN card, act as an AP? [09:30] I've googled it and tried a bunch of things, to no avail.... [09:41] kdns: https://www.google.de/search?q=linux+wireless+access+point+howto [09:42] I already just said, I have googled it [09:43] kdns: how do you like to build it? [09:44] use the networmanager? configure it with wapsupplicatnt and co [09:44] I've tried creating it in network manager as adhoc, no AP appears (as seen from my phone). Tried as 'shared', same. Tried shared IP, DHCP, tried locking it to a specific card... literally everything I could do with every setting in network manager, nothing ever shows up ... [09:44] dose your card support the ap mode? [09:44] ahh I didn't know it needed hardware support, I'll check. Thanks :) [09:45] yes, it does. [09:48] sorry i'am @work so i will be back later === Quintasan_ is now known as Quintasan [10:00] kdns: may have a look at "hostapd" === kotTon_kaNdiy is now known as jimbob6996 [10:11] hi [10:11] On windows i can lock screen by pressing Winkey + L [10:11] Is there a shortcut key for Kubuntu? [10:12] to lock screen [10:13] not that I can find, bt [10:14] BTCOxygen: try CTRL + ALT + L [10:15] neotheo: thanks [10:15] and ctrl+alt+T to switch to terminal [10:15] makes sense [10:15] didnt know that one :D [10:15] doesnt work :( [10:16] KDE doesn't have ctrl+alt+t as standard, that is to say, there is no standard key for the Konsole. === abhishek is now known as abhishek__ [10:16] not Konsole [10:16] You can ofcourse set the Konsole to launch on ctrl + alt + t [10:17] to exit to the terminal screen [10:17] or k [10:18] jimbob6996: Are you on Ubuntu? There ctrl + alt + t launches the Gnome terminal indeed. [10:18] yup [10:18] since this is a kubutnu chat room, I figured everyone was using it [10:18] jimbob6996: Ah, this is Kubuntu, Kubuntu doesn't have a standard keyboard shortcut for the Konsole, the KDE terminal emulator. [10:18] my bad [10:19] jimbob6996: No problem :) [11:01] hi, [11:01] I have installed scrapy [11:01] when i try starting it, i get following error [11:02] pkg_resources.DistributionNotFound: pyOpenSSL [11:02] i have installed pyOpenSSL using its tar file [11:11] Hi all [11:12] problem starting scrapy [11:13] hello BluesKaj [11:13] i get following error [11:13] when i strat scrapy [11:13] pkg_resources.DistributionNotFound: pyOpenSSL [11:15] amarsaurabh, you might get an answer in #python [11:16] thanks === kotTon_kaNdiy is now known as jimbob6996 [12:16] Why does kubuntu not come with kwrite installed by default? seems better than Kate . [12:19] yossarianuk: arbitrary choice I made back in the day, I prefer kate because it can load more than one document in one window which was in line with UI trends back then (tabbed browsing) [12:40] Good afternoon [13:14] would be good for kwrite to be installed by default... [13:14] yossarianuk: Why? [13:15] Nevermind, I read koffice for whatever reason ;f [13:17] Kate <3 === yofel_ is now known as yofel === kubuntu is now known as Guest58539 === dragan is now known as Guest46251 [14:29] hi! i got a question: I am using the current kubuntu 32bit with 4G of RAM. Now if i do a free -m i see there are only 3275M of RAM, is it possible to use all of the 4G? [14:30] FlashDeluxe: No [14:30] FlashDeluxe: To use all 4GB you need to use the 64-bit edition [14:31] BTCOxygen: but in theory 32bit could use up to 4G or am i wrong? [14:32] theory 32bit could use ~4G [14:32] ~ == apriximately [14:32] rox* [14:32] lol [14:32] typo [14:32] ok [14:32] BTCOxygen: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation. [14:33] let's approach this mathematically [14:33] FlashDeluxe: Or you could you the PAE kernel, that one supports more than 3.7G of RAM. [14:33] theory 32bit could use around 4G [14:33] yes, but in /proc/meminfo there is total memory of 3353648 kB Thats way to less? [14:33] with 32 bits you can address 2^32 unique locations [14:33] FlashDeluxe: Thats normal for a 32-bit [14:34] I got a windows 7 on another notebook with 32bit and there i get 4G running [14:34] i will try the pae kernel and see whats happening [14:35] FlashDeluxe: or you could use 64-bit [14:35] BTCOxygen: not on my notebook :( [14:35] FlashDeluxe: Windows 32Bit sees the same amount of ram, they just say it is 4G... [14:36] FlashDeluxe: does your notebook support 64-bit ? [14:36] BTCOxygen: nope :( [14:37] then i guess you have to go with the kernal lordievader mentioned [14:38] FlashDeluxe: Btw you won't notice much difference between 3.7 and 4G, I'd say it is too much trouble for what is's worth. [14:39] lordievader my problem is, that i am using 3,3G i would be happy to use 3,7G ;-) [14:39] then go with the kernal lordievader mentioned [14:39] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [14:40] yup, i will try it [14:40] ok, please let us know once you try it [14:40] Research the PAE kernel first though. === Vito is now known as DramaKing [14:40] I don't know what the consequenses are of that kernel, what is different, etc.. === DramaKing is now known as Vito [14:43] I'm using 3g RAM , and haven't seen the swap used yet [14:43] BTCOxygen, I think you won't see much difference at all between what is sen and 4G [14:43] seen [14:44] That is what I thought. [14:46] my swap is used, 266M thats why i asked ;) I will reboot and see whats happening [14:53] I am running 64-bit of Kubuntu [14:53] So, no swap problems [14:54] sorr BTCOxygen my suggestion should have been directed to flashdeluxe [14:55] * apachelogger notes that kubuntu's kernel has PAE enabled by default [14:55] unless they changed something, which I doubt === spawn[dead] is now known as spawn57 [15:01] apachelogger: it does on >= 12.10 [15:01] maybe even earlier, not sure how the 32bit default was handled there [15:04] 12.04 actually [15:05] yofel: 12.04 was the first version === jonas_ is now known as Guest53152 [15:23] проверка === spawn57 is now known as spawn[dead] === cornfeed is now known as cornfeed|NotHer === cornfeed|NotHer is now known as cornfeed|NotHere === cornfeed|NotHere is now known as cornfeed_ === cornfeed_ is now known as zz_cornfeed === zz_cornfeed is now known as cornfeed === cornfeed is now known as cornfeedhobo === mikymike is now known as D3n4riu5 === jonas_ is now known as Guest71087 [17:40] Hello! When I try to install libiodbc2 using apt-get, I'm prompted to remove about 360mb of KDE applications [17:40] http://paste.kde.org/648776/ [17:41] Any idea on what I'm doing wrong? [17:48] phalgun: my guess, it conflicts with anything that akonadi needs and thus removes akonadi, thus removing most of KDE [17:48] you don't want libiodbc2 [17:48] iirc we switched to unixodbc-dev [17:48] and everything is linked to unixodbc [17:49] which conflicts with libiodbc2 [17:49] shadeslayer: i have unixodbc installed already [17:49] libiodbc2 is required by soprano and hence nepomuk [17:49] not really, you can build soprano with unixodbc [17:50] you just need to patch it [17:50] phalgun: http://bazaar.launchpad.net/~ubuntu-branches/ubuntu/raring/soprano/raring/view/head:/debian/patches/no-odbc-dm [17:51] just download and apply that [17:52] phalgun: so, why are you building soprano/nepomuk from source? [17:52] shadeslayer: working on the audio metadata support for nepomuk-core [17:52] I see [17:53] won't it be beneficial to just install project-neon and only compile nepomuk-core ? [17:53] less time spent on compiling and more time spent on coding [17:54] never used project-neon before. will give it a try if the patch doesn't work [17:54] okay :) [17:56] the fun bit is that I don't have to worry about deps and compiling everything from scratch, I just clone a project foo, do a simple : sudo apt-get build-dep project-neon-foo , and I'm all set [17:57] shadeslayer: that is all? There should be a catch somewhere [17:57] nope [17:57] that really is all [17:57] it even has scripts like neonmake which will auto set all cmake variables so that things are picked from /opt/project-neon [17:57] !neon [17:57] Project Neon provides set of daily builds of KDE and releated modules | See https://wiki.kubuntu.org/Kubuntu/ProjectNeon | More support in #project-neon [17:58] I offload all my builds to launchpad :P [18:01] shadeslayer: the patch you gave me is for soprano 2.7.5 [18:01] guess it needs changes for 2.9.0 [18:01] should apply just fine to master? [18:03] shadeslayer: the patch worked fine. but soprano still says it needs libiodbc [18:04] !find lib/odbc/virtodbc_r.so [18:04] File lib/odbc/virtodbc_r.so found in libvirtodbc0 [18:04] phalgun: have you done : sudo apt-get build-dep soprano ? [18:05] shadeslayer: have not.. was trying your build-dep for nepomuk-core directly [18:05] well ... since you're also building soprano, you need to do : sudo apt-get build-dep soprano [18:07] heh, i was expecting it to do a recursive dependency installation. [18:07] hah, no [18:07] if it were to do that, you'd end up installing alot of things === pjoe_dj is now known as pjoe_afk [18:08] true! [18:10] shadeslayer: it worked. Thank you! [18:10] np :) === claudio is now known as Guest34801 [19:12] Hello i jusit installed kubuntu-desktop from ubuntu, how do i remove ubuntu, unity and all of its applications? [19:13] ehlu: http://askubuntu.com/questions/6302/how-can-you-remove-unity [19:14] mydogsnameisrudy: i use 12.10 [19:15] i tried this http://www.psychocats.net/ubuntu/purekubuntu [19:15] you could try sudo apt-get purge ubuntu-desktop [19:15] http://pastie.org/5698518 [19:16] well clearly that command is outdated ;) [19:16] Hi everybody, [19:16] Hope I can find some help here. [19:16] To day, I upgraded from 11.10 to 12.04. At the end of the upgrade, there is a big list of packages that are proposed for removal. But it said it can take several hours to remove. [19:16] I chosen to keep them but I'm facing some issues and I find removing these packages could help. Is there a log where I can find the list of this packages that were proposed for removal ? [19:16] Thanks for help. ;-) [19:16] MattRac: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation. [19:17] MattRac: have a look in /var/log [19:17] it should have an upgrade log [19:18] and in the upgrade log you should be able to find the packges it wanted to remove [19:18] shadeslayer: I thought about /var/log/dist-upgrade/... but didn't find a clear list inside ;-) [19:19] hmm [19:19] MattRac: just run sudo apt-get autoremove [19:19] and it should remove orphaned packages [19:20] shadeslayer: Don't work because they aren't orphans ;-) [19:20] Just useless :-) [19:21] dunno then xD [19:21] maybe someone in #ubuntu can answer? [19:24] shadeslayer: I'll try also ;-) === len is now known as Guest35565 === torminator is now known as Guest67536 === ronnoc_ is now known as ronnoc === dniMretsaM is now known as dniMretsaM_away [22:05] my mysql server fails to start. "start: Job failed to start" . can someone help me debug it? what file to pastebin? [22:06] hi everybody [22:07] help me please, why my wireless networking in network manager disabled by default after boot [22:25] !purekde | ehlu [22:25] ehlu: If you want to remove all !Gnome packages and have a default !Kubuntu system follow the instructions here « http://www.psychocats.net/ubuntu/purekde » === dniMretsaM_away is now known as dniMretsaM === dniMretsaM is now known as dniMretsaM_away === V is now known as heHATEme [22:56] evening guys - I really need help right now. My kde session is running somewhere between dead slow and stop, hard disk is being worked on 100% of the time, and I can't figure out what's doing it. === heHATEme is now known as Obama [22:56] Can someone please help me fix this? At the moment, my rapid boot now takes 2m30s before I can use the dang desktop :( [22:58] i've set kde to start with an empty session, which it's ignoring - i've tried killing everything in top which looks like it's using shedloads of memory, and still nothing is helping. [23:00] evening bimini :) How is the home of the best crystal in the world this evening? :) [23:03] it seems to be everything kde related which is slowing the machine down. i started the partition editor almost 10 minutes ago - it's running, but it's still not appeared on my desktop === Obama is now known as vorian [23:20] BarkingFish: figure anything out?