=== chiluk_away is now known as chiluk [15:55] I have installed the latest mythbuntu, but I seem to have several issues. Which logs and command outputs would be most useful troubleshooting? [16:01] qwebirc41109: depends on the issues [17:08] Hi folks, Mythbuntu Control Centre has set the repos to Quantal. Is this correct (I am running Quantal)? Or should I set the source to Precise? [17:08] DarthFrog, um. If you are running Quantal, why wouldn't you want the repos set to Quantal? [17:10] tgm4883: Because I'm getting errors and Mythtbuntu.org says it only supports LTS from now on. [17:10] DarthFrog, link? [17:10] Errors when I try to run "apt-get dist-upgrade", that is. [17:10] DarthFrog, the reason I ask, is I'm about fixing things if they are unclear [17:11] and Mythbuntu.org shouldn't say it supports only LTS releases from now on. It should say we only release ISOs for LTS releases [17:11] DarthFrog, so to answer your last question, it should be Quantal, and please pastebin the errors [17:12] !pastebin [17:12] when pasting more than 5 lines of data please use http://mythbuntu.pastebin.com so you don't flood the channel. Then please post the link in the channel. [17:13] http://pastebin.com/vutmuHAG [17:14] tgm4883: Ah, I think I misunderstood the announcement then, about moving to LTS. I thought that was an excellent move, BTW. [17:16] DarthFrog, we agree :) [17:16] DarthFrog, you can safely ignore that error [17:17] DarthFrog, I had forgotten about that issue, will fix [17:17] yeah, but that error screws up my update script. [17:17] ah [17:17] Should I just remove that repo? [17:17] well let me see if I can fix that easily [17:37] tgm4883: Did you get it fixed? [18:02] Before I go spend $500, could anyone tell me if the Hauppauge HD-PVR 1212 works well with Mythbuntu? [18:06] 500? where are you buying it [18:07] DarthFrog: http://www.mythtv.org/wiki/Hauppauge_HD-PVR [18:07] Shadow__X: I'll be buying 2 and a Shaw HD terminal. [18:08] Shadow__X: Yeah, I read that page. I was hoping to talk to someone who's actually doing what I want to do. :-) [18:08] what is that exactly [18:10] Set up two Shaw HD terminals (Motorola DCX3200-M) with two Hauppauge 1212 units into MythTV 0.26 (Mythbuntu). [18:10] ok well first you can look at setting one up [18:11] as long as the terminal outputs component i am not seeing what might be the problem? unless, you are trying to change channels on both of them using one firewire connection. Also, there is a good chance no one has tried your setup before and you might need to be the first and try it out yourself [18:12] Do you happen to know how well the IR Blaster on the 1212 works? I've been nothing but frustrated trying to get a Command IR to work consistently. [18:12] amazon has the 1212 for 170 btw [18:13] I can get it locally for CDN$149. [18:13] i do not personally have one but it seems like there are people who do use them to change channels [18:13] well thats good [18:13] http://www.bestbuy.ca/en-CA/product/hauppauge-hauppauge-wintv-hdpvr-video-recorder-1219-1219/10107259.aspx [18:14] i have used firewire to change channels and record off of my box ( i realize that changing channels may or may not work for you [18:14] The 1219 has both English and French manuals. [18:15] You're lucky. Shaw is rather anal about such things. Firewire is locked out and everything is encrytped. [18:15] well are there firwire ports? you could possible try to change channels through firewire at leat [18:16] The @#(& are implementing a new guide system for the HD terminals. They will be changing the channel mappings from what Schedules Direct reports. [18:16] are you using this for the ir blaster http://www.mythtv.org/wiki/Using_an_IR_Blaster_with_MythTV#Configuring_Myth_Backend [18:17] The 1212 comes with its own ir blaster. [18:17] did you look at the link i sent you? its about setting up the blaster [18:17] you said you were having trouble with the blaster [18:17] http://www.commandir.com/content/view/19/31/ [18:18] is the one I've tried to use. It works properly (i.e. the set-top box changes channels properly) about 85% of the time. [18:18] try what i linked to you [18:19] there is a link to a channel change script [18:20] Thanks, but I've given up on it. The output from the digital terminals (not HD terminals) was connected to Hauppauge PVR-150 cards. They no longer seem to work with Myth so I'm replacing them with the Hauppauge HD-PVRs. [18:21] i would look to see what is the problem [18:21] We've re-written the channel change script. [18:21] The problem seems to be the ivtv drivers. [18:21] They seem to be orphaned. [18:21] well digital is all around better [18:22] Yes, I agree digital is better. [18:23] however I have 4 digital terminals and a whole bunch of Hauppauge 350s, 500s, 250s and 150s that are now obsolete. [18:23] since you are getting the hdpvr local you could always try it and if you dont like it return it [18:23] i have some pentium 3's that are now obsolete [18:24] :-) [18:37] Shadow__X: Here's the modified change channels script we run: [18:37] http://pastebin.com/adFdYMiX [18:37] it adds locking. [18:37] why would you want to lock it? [18:38] Because things wouldn't work with out it. Commands to set-top boxes were being dropped. [18:38] DarthFrog, sorry, got pulled into a meeting [18:39] doing it now [18:39] oh, i really don't know anything about lirc stuff. I only use the mce remotes and thats it [18:39] tgm4883: No problem. Thanks for getting back to it. [18:39] DarthFrog, bah, looks like it will take 7 hours to fix :/ [18:39] tgm4883: Ouch!!!! [18:40] DarthFrog, basically, that PPA doesn't get a lot of updates pushed to it. So what is happening is nothing is in it for Quantal yet, so techncially, the PPA doesn't exist [18:40] OK, then I'll just delete the repo. :-) [18:40] I just pushed something to it, but it's queued to build in 7 hours [18:41] so yea, you can disable the repo or wait [18:41] which repo [18:41] Well, I'll wait then. I won't be doing a dist-upgrade again till tomorrow. [18:41] Shadow__X: mythbuntu-testing-quantal [18:41] ah ok [18:42] btw is live streaming on .25.3 supposed to work at all resolutions? I am getting blocky video in most resolutions [18:45] DarthFrog, I would expect it to be fixed by then :) [18:45] Shadow__X, unsure, I don't use 0.25.3 or HLS [18:53] hmm, i would upgrade to .26 but it seems like the windows builds are behind and the machine i was going to do my own builds isnt working with me === yuki-onna_ is now known as yuki-onna [22:39] one of my frontends is not staying suspended. It goes into suspend but then turns right back on. This started happening when i upgraded to 12.04