[00:00] * RobbyF is getting for changelogs this week. [00:00] the daily images improve so much. [00:01] RobbyF, realy !!?!! [00:01] I meant to put excited. [00:01] I was to excited and missed that word. [00:01] I think tuesday someone was saying! [00:02] what improve [00:03] overall smoothness. Search bar, movie player [00:03] that's what I 'think' I've noticed. [00:03] Tablet ? [00:03] galaxy nexus [00:03] ah nice [00:06] I think new features too [00:08] I'm not a dev or anything, just very enthused user with 3 years of desktop experience and I work on the mobile market. [00:12] ^^ [00:12] 30years [00:26] Are there any lunch/brunch experts here? [00:27] eat ? [00:27] http://pastebin.com/RuedkE0L [00:27] ^^ [00:28] u try full_shutlle [00:28] yes. [00:28] ditto for the bug. [00:29] what is your phone ? [00:29] the sources for the Advent Vega(aka Nvidia Shuttle P10AN01) are on github. (kernel and device) [00:29] FYI http://forum.cyanogenmod.org/topic/69585-vegabean-android-jellybean-advent-vega-aka-p10an01-aka-nvidia-shuttle-aka-viewsonic-viewpad-10s/#entry377074 [00:29] geme a device common link [00:30] I'm using scanno's github repos. [00:30] He has a manifest file that I used to repo init and sync from. [00:30] ok geme manifest link [00:31] It's in the FYI page. [00:31] or past your device.mk [00:31] search manifest [00:31] device.mk hang on [00:33] omac, [00:33] brunch shuttle [00:33] http://pastebin.com/XPv2GPb7 [00:34] ditto for the error with brunch shuttle [00:34] ~/android/system/device/nvidia/shuttle/device.mk [00:34] I just gave the device.mk to you. [00:35] brunch shuttle make error ? [00:35] I'll reopen a shell , envsetup and brunch shuttle. hangon. [00:36] wait [00:37] http://pastebin.com/dKf5J8Xq [00:37] multiple board config error for shuttle [00:38] tried breakfast and got the same multiple board config error. [00:40] here is the breakfast shuttle error: http://pastebin.com/Y1sfqcK2 [00:41] are shuttle ported for ubuntu arm ? === XenGi_ is now known as XenGi [00:41] nvidia shuttle its an arm ? [00:41] yes [00:42] tegra250 running vegabean [00:42] k [00:42] it has an ubuntu kernel, but it's still jellybean 4.1 based [00:42] ah [00:42] omac, but no sense because i use jb 4.1 to compile [00:42] uname -a Linux localhost 3.1.10-VegaCream #7 SMP PREEMPT Sun Sep 30 16:41:36 CEST 2012 armv7l GNU/Linux [00:43] you compile it on vega or ubuntu 64bit pc ? [00:44] the kernel is called vegacream, but it's ubuntu. About tablet says android 4.1.x something. [00:44] omac, is there cm10 for vegacream .? [00:44] I can't compile it myself yet. Scanno did. [00:44] It's 32-bit. [00:44] yes, I gave you the link FYI above. [00:45] It has all the git hub links including the manifest file scanno created. [00:45] I just wasn't able to repeat his build successfully yet. [00:46] AGAIN vegacream kernel(not rom) is hosted on github by scanno. [00:46] It's not on cyanogen's git repository. [00:49] That's why I'm asking the experts here and on cyanogenmod. My ultimate goal is to get ubuntu-touch on the Advent Vega(aka Nvidia Shuttle P10AN01). [00:49] but i dont see any patch for ubuntu on scanno git [00:50] that's right. I have to patch it. [00:50] for ascend p1? [00:50] But the patch should be easier when I get CM10.1 building properly. [00:50] when? [00:50] That's because ubuntu-phone's base ndk stuff is CM10.1 based. === don is now known as Guest74970 [00:50] yes [00:51] if you find cm10 git for vega [00:51] I am asking for help to build. [00:51] not easy its mean your error some were on common or device [00:51] Tigrouzen: I gave it to you. http://forum.cyanogenmod.org/topic/69585-vegabean-android-jellybean-advent-vega-aka-p10an01-aka-nvidia-shuttle-aka-viewsonic-viewpad-10s/#entry377074 [00:51] It's on that page. search for git. [00:52] you will find scanno stuff. [00:52] for huawei ascend p1 when? tank [00:53] ò [00:54] https://github.com/scanno [00:54] omac [00:54] yes [00:54] first you need [00:55] phablet-dev-bootstrap yorufolder [00:55] after openning manifest.xml on .repo folder and add [00:55] wakarimasu [00:55] [00:55] [00:55] [00:55] [00:55] [00:55] [00:55] [00:56] then repo sync [00:56] I'll do that right away. [00:56] hmm [00:56] doumo [00:57] what's the convention for phablet's top dirname? [01:01] phablet-dev-bootstrap vegabuntu [01:01] I'll be back tomorrow :) [01:01] oyasumi nasai [01:07] YAY I GOT UBUNTU TOUCH TO WORK ON TOUCHPAD!!!!!!!!!!!!!!!!11 [01:07] YAY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!11 [01:07] THANKS EVERYONE! [01:07] 2.6.35 was the trick [01:07] Kernel [01:12] yep [01:12] and all other tricks of course [01:13] now off to get touch working... I don't have adb anymore which is odd === kyle_ is now known as Guest61298 [02:39] hello I am trying to install the ubuntu operation system on my arm based netbook, however the installer claims 'Unsupported device, autodetect fails device' [02:42] i have never used freenode so forgive me if im doing something wrong but imma try and port ubuntu to the evo 3d/v and im using my phone to tether to my laptop. when syncing with the repo and it stops and i put in that code to get it going again does it start over or pick up where it left off? [02:45] It mostly picks up where it left off. all finished directories are kept and not redownloaded. [02:49] oh thank God cause i thought i was getting nowhere with syncing the repo every day since im using my phone and internet isnt gonna be as fast === Ursinha-afk is now known as Ursinha === Ursinha-afk is now known as Ursinha [04:09] Rob: if you get a chance... Missing stuff in fonts with adreno and ubuntu.. no idea why.. don't care at the momeny http://www.onsitedentalsystems.com/ubuntutouchpad.jpg [04:10] I had to steal android libEGL and libGL from android 4.2.1 from evervolv and overwrite mine.. strange huh? [04:11] without that the screen would not get an image [06:00] hello === eel is now known as eel69 [06:15] hi everyone. [06:16] phablet-flash is not downloading and installing the latest daily. is this correct? [06:16] it is checking for the image at http://cdimage.ubuntu.com/ubuntu-touch-preview/quantal/mwc-demo/quantal-preinstalled-phablet-armhf [06:17] however, the latest image is at http://cdimage.ubuntu.com/ubuntu-touch-preview/daily-preinstalled/current/quantal-preinstalled-phablet-armhf.zip [06:21] if i want the latest image, i need to do "phablet-flash -l", right? [06:23] these instructions are not mentioned here: https://wiki.ubuntu.com/Touch/Install [06:29] i have just edited that page to include the "phablet-flash -l" command. [07:20] From a business perspective which OEM's have shown interest in the ubuntu touch after this week at MWC? [07:39] Hallo, I want to unintall it, but I can't connect the phone by USB [07:39] Nothing happen's. Dosen't show up as connected. [07:40] Hallo, I want to unintall it, but I can't connect the phone by USB [07:40] Nothing happen's. Dosen't show up as connected. [07:46] Anyone? === chriadam is now known as chriadam|away [07:52] anyone get past the "not enough space" issue when installing UbuntuTouch? [07:53] I've done a factory wipe and everything. [07:53] still can't push with cmd phablet-flash [08:04] anyone know how much space is required to install UbuntuTouch? [08:05] the rootfs is quite big [08:05] like 500mb atleast [08:05] right. [08:05] Im trying to uninstall it, [08:05] i noticed that [08:06] anyone know how I can connect it to USB or download files on it? [08:06] my problem is i've factory reset my device and STILL CANT install UbuntuTouch [08:06] You have to have linux and pull the image file from the repository [08:06] then you could copy it to a usb drive if you'd like [08:07] So I have to have linux for the computer to detect the USB? [08:07] correct? [08:08] the automagical flasher only runs on linux right now [08:08] @myhramz you have UbuntuTouch installed already? (i'm trying to make sure i understand you) [08:08] but you can do it manually if you download the right images [08:08] i just to get it installed. [08:08] can't with this stupid storage error. [08:08] good morning [08:08] (on a FACTORY RESET device) [08:12] Yeah I do physique [08:12] how can I connect it by usb to transfer files? [08:14] @myhrmanz Oh that I don't know. It may be a bug. [08:14] Okey [08:14] any other way I can flash back android? [08:14] the wiki page had a shell script to get back to android [08:15] or you can download a boot loader and img file and do fastboot commands manually to get back to stock [08:15] from the wiki ---> run ./flash-all.sh [08:16] https://wiki.ubuntu.com/Touch/Install [08:17] Okey ^^ I have no idea how to do that. I installed it by a clockworkmod [08:18] should the "wipe data/factory reset" bring me back to the stockOS? [08:18] no [08:18] no [08:18] no [08:19] you will need to find the bootloader for your device, flash it from a terminal in Linux. [08:19] then flash an image file from the terminal in Linux. === corne_away is now known as corne === SkavenXXI-[OFF] is now known as SkavenXXI [08:47] Hi to all! [08:48] I'm interested into developing for tablet, and I have a Nexus 7. [08:50] Since I use the tablet for personal purposes, I want to know if and when comes a build that allows me to use the tablet for development AND normal purposes... [08:54] hey, how can i update [08:55] i have just installed the os and i like to know if there is an automatic update within the system [08:55] ? [08:55] thanks [08:55] how can i replace the wifi drivers ? [08:56] the safest update procedure at the moment is to re-flash [08:57] the phablet-flash tool has an option to flash the latest daily [08:58] to replace wifi drivers you would have to re-roll the android image that is used for the HW management ... code is at phablet.ubuntu.com [08:59] ogra_, can you tell me what functions have improved latest builds for Nexus 7? [09:00] nope, i dont follow 100s of chagelogs :) [09:01] there willl be a changelog summary soon that will be published along with the images though [09:01] (see the mailing list, it was announced there) [09:01] I'm VERY interested into help to developing it, but I don't want to flash into my tablet if is completely unusable :/ [09:03] well, its usable for development, the browser doesnt know tabs yet and the amount of apps is really limited [09:03] and what reason would you have for replacing the wifi drivers [09:03] bcmdhd works juuuust fine. [09:04] if you rely on watching movies, litesning to music, playing games and reading books on your tablet, its not for you yet [09:04] Namidairo, you wish :) [09:04] ogra_, no, I mean usable also (limitedly) for "normal" uses, since I frequently use my tablet for taking notes, messaging etc. :) [09:04] ogra_: well the alternative isn't great [09:05] right, but if bcmdhd doesnt work its no fun to debugs :) [09:05] -s [09:06] bl4de, taking notes works :) [09:06] Hey, is there any way that I can get some debug-information why my gt-p6800 does not go further from samsung start screen? [09:06] ogra_, yes yes, and is very very cool1 [09:06] *! :) [09:06] dun1982, i played with porting the i9100 yesterday and noted that the recovery moode didnt mount /system and /data before flashing [09:07] might be a general samsung prob, check that [09:07] but it's true about 2 weeks for a usable rom Shuttleworth said? [09:07] huh ? [09:07] he said "weeks away" not "two weeks away" [09:07] :) [09:08] * ogra_ read the interview too [09:09] ...some web sites there, in Italy, said two weeks...check whether the informations are true, I say! :) [09:09] its definitely more than two weeks before it gets usable for endusers [09:10] october is the target ... it will surelys be better than it is today in two weeks .... but nothing i would give to a non developer yet [09:10] some webmasters and columnist have the bad habit to wrote things without checking it :) [09:10] *s [09:11] or to translte them in a weird way :) [09:11] *translate [09:12] yes :) [09:13] oh, by the way, sorry for my non perfect english! :) [09:13] *not [09:15] ogra_: how did you notice that it did not mount them? [09:15] ie. where did you look for it? [09:15] adb while in recovery mode [09:15] from the build-image directly? [09:15] Hm... for some reason I cannot adb while in recovery (tested that on Sat). [09:16] I'm using CWM 6.0.23 and Mobile Odin, there is no factory recovery anymore in my slate. [09:16] when i flashed the zip it catually properly flashed the recovery partition so i could boot into recovery (noticed that it had an ubuntu wallpaper there so i knew something had worked) and inspect from there [09:16] Aah, I did not get even that far. [09:17] It seems that nothing is loaded from the build image. The device just freezes to "Samsung Galaxy Tab 7.7" startup screen and that's it. [09:18] no black screen after that ? [09:18] for me it went to a black screen for a moment and then rebooted [09:18] Nope, not even there. [09:18] It feels like it does not load anything from the image. [09:18] but you can get into recovery atm ? [09:19] I can CWM recovery yes, I can reload any image I want. But I cannot get any logs or anything to know what's happening... [09:19] hmm, i thought CWM always runs adb... [09:19] well when I have CWM running and I try adb devices (empty). [09:20] If I put sideload open, I get something visible, but still I cannot adb shell or adb push at all. === vrruiz_ is now known as rvr_ [10:09] rsalveti, do you know who could take a look at https://lists.launchpad.net/ubuntu-phone/msg00638.html? === mmrazik is now known as mmrazik|afk [10:16] dholbach, i think he looked at it already, it was discussed for a while in the other channel [10:17] (the plan is to drop swap altogether though) [10:17] ah ok === j15h is now known as jishnu7 [10:25] shouldn't phablet-flash grab an image newer than 95 by default now? [10:26] ah, -l [10:29] there is also an option to give a build number afaik ... if you dont want -l (latest) [10:38] anyone there has got nexus 7 with multirom? [10:40] see the xda forums, while we neither encourage nor support it, there seem to be multiboot solutions there [10:46] ok :) [10:49] I want to install whosthere from the ppa but i get some Erros... http://ppa.launchpad.net/m-gehre/ppa/ubuntu/dists/precise/main/source/Sources 404 Not Found [10:49] W: Fehlschlag beim Holen von http://ppa.launchpad.net/m-gehre/ppa/ubuntu/dists/precise/main/binary-i386/Packages 404 Not Found [10:50] strohhalm, contact the PPA owner then (m-gehre in that case it seems) [10:51] strohhalm, though since the phablet images are all quantal, i doubt there will actually be a build (or sources) for precise [10:51] you can check the package details on the launchpad page for the PPA [10:51] https://launchpad.net/~m-gehre/+archive/ppa [10:51] I think the ppa is still online :( [10:51] I also try'd to compile it but it get some errors too [10:52] see the "published in" pulldown there :) [10:52] you are trying to install on precise ... [10:52] it only has packages for quantal [10:53] hmmm okay... [10:54] Thank you :) [10:54] i think he also has a bzr branch https://code.launchpad.net/~m-gehre if you just want the source [10:57] I also try'd to compile it but it get some errors too [10:59] yu likely need the sdk installled (and all of its dependencies) [11:27] Hello developers, a you install ubuntu phone os at ZTE Grand X processor Nvidia tegra 2 ? sorry for my english, a`m from Russia [11:29] vip_, see https://wiki.ubuntu.com/Touch/Devices [11:31] Is very difficult to port the firmware? and generally on the tegra 2 already has firmware ported to any realties smartphone? [11:36] see https://wiki.ubuntu.com/Touch/Porting for the process [11:36] its mainly just copy paste work and then fixing remaining build errors [11:38] a`m not proggamist [11:43] a`m user , ZTE Grand X fery good smartphone, but firmware fery bad [11:45] android 4.0.3 , official support dont want update this smartphone, for this reason i want firmware for us === SkavenXXI is now known as SkavenXXI-[OFF] === mmrazik|afk is now known as mmrazik === gatox is now known as gatox_brb [12:07] bzr was missing somewhere in the ubuntu touch recipe: http://pastebin.com/3GbqxzYW [12:07] i'm installing it. [12:10] hey [12:11] so i built my ota.zip and i have the phablet .zip but when i flash them i get success but they sit on splash screen? [12:12] yoo tiggg!! whats up [12:13] MrNerd, you have to be very very patient when you run this stuff the first time. Go have a coffee for about an hour or so. CM10.1 and VegaBean are the same when starting them up for the first time. [12:13] oh so i have to wait? [12:13] wow... i thought i just did it wrong. [12:14] My guess is all the sdcard and internal flash memory partitioning/formating/unpacking/installing/package setup. [12:14] so i flash the built.zip then iflash the phablet.zip then reboot and wait? [12:14] on ubuntu wrong link to sdcard on script [12:15] edit /etc/environnement [12:15] EXTERNAL_STORAGE=/sdcard [12:15] You have to remember these are slower cpu's than on a pc. The flash memory communication on my advent vega is much slower than a regular desktop so I have to be patient. The other slow part is the actual flash memory when writing on a used sdcard/internal flash is very very slow. [12:16] MrNerd, long wait === MacSlow is now known as MacSlow|lunch [12:16] alright i was just making sure i didnt screw up thanks alot. [12:16] Advent Vega isn't usb3, isn't usb2. It's usb! argh. [12:17] tigrouzen was the external storage to me? [12:17] sdcard [12:17] were you talking to me tho? [12:18] so how do i make sure i have the latest source? [12:18] euh [12:18] and my boot.img doesnt boot cm10.1 [12:18] repo sync [12:18] repo sync will keep you up to date [12:18] they made a change and omac said i didnt have latest. [12:19] but if you change some thing dont forget commit it before then repo sync erase all change [12:19] ok [12:22] how do i identify with sasl? [12:22] i wanna use xchat.. === MrNerd is now known as Mrnerd_web [12:34] popey, are u here? [12:34] ya [12:35] Did u remember me? [12:35] yup [12:35] hk dns issue [12:35] OK, i think it should not revalent with the DNS [12:36] IDK what problem is it, but it DOES NOT do with DNS. [12:37] I've gone through the whole python script(phablet-dev-bootstrap), i located the git address, and the brach, then i did this: [12:37] repo init -u git://phablet.ubuntu.com/CyanogenMod/android.git -b phablet-10.1 [12:37] It automatically connect to android.git.kernel.org [12:38] But, i tried to do this on WINDOWS, using TortoiseGIT. With same git address AND branch, it success. [12:38] So it should the problem regrading my Ubuntu in my VM? [12:40] OK, not using the same ubuntu, in the same VM(that i have problem on it), i do git clone, it success. [12:40] using the same* [12:40] so just "repo init" caused this problem. [12:46] popey, are u getting the files from "https://gerrit.googlesource.com/git-repo"? [12:48] Ah, oh yes! I've solved the problem! [12:48] oh? [12:49] ah ha, bingo! [12:50] I have two "repo" files in my ubuntu, one is newer(with "https://gerrit.googlesource.com/git-repo" as git), another is older(with "android.git.kernel.org"). [12:50] It seems that it just load the older one, which gives the wrong address. [12:50] So, let me delete it... [12:50] and the phablet tree wants the one from gerrit (as i explained yesterday) [12:53] ok, i've rename the repo in /usr/local/bin to repo.old, and make an symbolic link to the new one(which is located in /usr/bin) [12:55] ok, repo initalized. [12:55] so now phablet-dev-bootstrap does the right thing ? [12:56] YES! [12:56] It receiving objects continously [12:57] awesome [12:57] hopkinskong: can you mark the bug as invalid please [12:57] glad you made it [12:58] OK done :D [12:58] done ? [12:59] i meant i have marked it "invalid" [12:59] you must have a really fast intenet connection if you can get 15G at that speed [12:59] ah [12:59] heh [12:59] ah..i have 100Mbps connections only lol [12:59] ah, btw, after finish the bootstrap, what should i do next? [13:02] follow the porting wikipage [13:03] anyone using any of the clones for testing [13:03] next step is "Enabling a new device"? [13:03] yes === gatox_brb is now known as gatox [13:06] OK, thanks === [SLB]` is now known as [SLB] [13:17] dpm, did you see https://wiki.ubuntu.com/Touch/FAQ? :) [13:18] bzr launchpad-login uticdmarceau2007@yahoo.ca [13:18] bzr: ERROR: The user name uticdmarceau2007@yahoo.ca is not registered on Launchpad. [13:18] omac, use your Launchpad ID, not your email address [13:18] I'm registered on launchpad. [13:18] omac, use the launchpad username instead of email [13:19] dholbach, LOL [13:19] ok. [13:19] omac, bzr launchpad-login omac777 [13:19] dholbach, nice to see community taking initiative here [13:19] dpm, yes, it's great - I think I'm going to add it to the header [13:20] at some stage I think we should drop release notes [13:20] done [13:20] lunch time - see you in a bit [13:21] bzr launchpad-login omac777 bzr: ERROR: The user name omac777 is not registered on Launchpad. === MacSlow|lunch is now known as MacSlow [13:22] uticdmarceau2007 [13:22] ok. [13:23] omac, did it work for you now? [13:30] any plans to release 3G/4G support soon ? someone knows ? [13:30] I am just waiting this feature, to install ubuntu touch in my nexus 4 [13:31] patches accepted :) [13:35] yes [13:37] I'm repo sync'ing after adding some project paths for the Advent Vega to the .repo/manifest.xml as Tigrouzen suggested. [13:42] hi [13:43] ubuntu for phone ? [13:43] kince: and tablets ! [13:45] and desktops ! [13:45] (and TVs) [13:49] hello! anyone from the canonical team here? I'd like to request to add a device to the porting WIP list [13:53] uanyone from the canonical team here? [13:54] lg2x, realistically you probably need to find someone with that device who wants to try porting. What device is it? [13:54] i am not from canonical btw [13:54] ive already ported it :P [13:54] ah [13:54] sorry, misunderstood! [13:55] i just want to know how to go about submitting it formally === [SLB] is now known as [SLB]` [14:04] lol [14:05] suck [14:05] lg2x, you just add it to the wikipage [14:05] FUCK!!!!!!!!!!!!!!!! [14:05] and probably send a mail to the mailinglist alongside so people get more awareness [14:08] ok [14:08] thanks [14:08] lg2x, what device btw :) === Ursinha-afk is now known as Ursinha === ckpringle_ is now known as ckpringle [14:11] after doing the repo sync with the changed manifest, the porting guide asks for me to cd device/nvidia/shuttle $ ./extract-files.sh, but there is no extract files script because the proprietary files are already in device/nvidia/shuttle/proprietary/ [14:12] how did they get there ? === juicyjones|away is now known as juicyjones [14:12] do I need to cp -Rf /device/nvidia/shuttle/proprietary to vendor/nvidia/shuttle/ ? [14:13] scanno or ronaldo already did this work. [14:17] https://github.com/rondoval/android_device_nvidia_shuttle [14:17] damn, I really need to read more release notes. :P [14:17] under the proprietary dir there. [14:18] I keep on confusing scanno and rondoval, but these are the goto guys for the Advent Vega for sure. [14:21]