[00:32] <Camilo_> Saludos compañeros y compañeras Linuxeros!
[02:11]  * goodtime is listening to All Time Low by Widespread Panic on 'Til the Medicine Takes [Audacious]
[02:47] <calwig> KGpg starts, import keys, displays keys etc. fine
[02:48] <calwig> Close KGpg, restart, doesnt start, gives an error, "unsafe ownership of configuration file"
[02:48] <calwig> referring to gpg.conf
[02:50] <calwig> Doesnt start at all then, even using sudo. Changed ownership of gpg.conf to root, still nothing. File is editable, writeable.
[02:50] <calwig> !kgpg
[02:59] <apachelogger> calwig: sudo chown -Rv $USER $HOME/.gnupg; chmod 600 $HOME/.gnupg/gpg.conf
[03:02] <calwig> lets do some magic...
=== matt__ is now known as evcoop
[03:06] <calwig> all retained, no ownerships changed
[03:08] <calwig> gpg:WARNING: unsafe ownership on configuration file ../.gnupg/gpg.conf
[03:08] <calwig> that still comes up
[03:08] <calwig> now as before
[03:14] <apachelogger> calwig: paste the output of .... ls -l $HOME/.gnupg/gpg.conf; echo $USER; echo $HOME
[03:17] <calwig> -rw------- 1 pc pc 9428 Mar  8 07:29 /home/pc/.gnupg/gpg.conf
[03:17] <ekoffel> Can i copy pxe image to hard drive and boot it off hard drive?
[03:17] <calwig> pc
[03:17] <calwig> /home/pc
[03:19] <calwig> apachelogger, when KGpg is initiated thru main menu, it hangs, nothing shows. When sudo is run, error arises
[03:19] <apachelogger> ah well
[03:19] <apachelogger> sudo makes sense
[03:19] <apachelogger> it is after all a different user :P
[03:19] <apachelogger> calwig: pidof kgpg
[03:20] <ekoffel> I guess not?
[03:20] <apachelogger> ekoffel: what pxe image?
[03:20] <ekoffel> Diskless image
[03:20] <ekoffel> Network boot
[03:21] <apachelogger> ekoffel: veeeeeeery tricky
[03:21] <calwig> pid of kgpg, its not on
[03:21] <calwig> where do i get pidof
[03:21] <apachelogger> it's a command
[03:21] <calwig> wait, sorry, 1998
[03:21] <apachelogger> ah
[03:21] <apachelogger> ok, so your old kgpg got stuck
[03:21] <ekoffel> Not gona be easy?
[03:21] <calwig> oh
[03:21] <apachelogger> calwig: killall -9 kgpg
[03:22] <apachelogger> then you should be able to start it without freezing
[03:22] <apachelogger> i.e. I suspect it was freezing because it was trying ot contact the old instance and failed becaues that had problems
[03:23] <calwig> nothing, does the same thing as when i freshly boot. mouse is running, thinking, then... nothing shows up
[03:23] <calwig> pidof is 3121 now
[03:23] <apachelogger> ekoffel: it's possible, it's just not practical
[03:23] <calwig> apachelogger, ive uninstalled, purged completely, still nothing
[03:23] <ekoffel> Can you tell me how?
[03:24] <apachelogger> what you want to do is have another machine in the network runa tftp server and configure your dhcp server such that it is aware of that
[03:24] <apachelogger> just google ubuntu network boot tftp I guess
[03:24] <apachelogger> it's really straight forward
[03:24] <apachelogger> calwig: are you sure it is not in your systray?
[03:24] <calwig> reinstalled, ran, hangs. i wonder really, it worked fine once, i just wonder why it doesnt start when its freshly purged
[03:24] <ekoffel> Tftp isnt that network
[03:24] <calwig> see, its supposed to be there! i somehow knew that.. nope
[03:25] <apachelogger> calwig: do you actually have a window that is frozen?
[03:25] <apachelogger> ekoffel: pxe images are supposed to be booted from a network
[03:25] <calwig> apachelogger, for a few seconds when it loads kgpg has a window, then disappears
[03:25] <apachelogger> calwig: may be a bug then
[03:25] <apachelogger> rm -r ~/.kde/share/*/kgpg*
[03:25] <apachelogger> maybe that helps
[03:25] <ekoffel> I know but i wanta put on a usb stick
[03:25] <calwig> pidof still running :(
[03:25] <apachelogger> ekoffel: I suggest googling
[03:26] <ekoffel> I have
[03:26] <apachelogger> calwig: well, killalk then do the rm -r
[03:26] <ekoffel> Been looking for weeks
[03:26] <calwig> apachelogger, should i apt-get remove first?
[03:26] <apachelogger> calwig: no
[03:26] <calwig> ok
[03:26] <apachelogger> that has absolutely no impact on data in $HOME
[03:26] <calwig> no such file or directory
[03:28] <apachelogger> sounds like a bug
[03:28] <apachelogger> kdebugdialog -> select everything
[03:28] <apachelogger> killall
[03:28]  * calwig agrees
[03:28] <apachelogger> then start it from a terminal
[03:28] <apachelogger> kgpg --nofork &> log
[03:28] <apachelogger> that will write everything into one file
[03:28] <calwig> where do i get kdebugdialog
[03:28] <apachelogger> paste that somewhere
[03:28] <apachelogger> already installed
[03:28] <apachelogger> just type it in a terminal or krunner
[03:30] <calwig> sudo?
[03:30] <calwig> or just kgpg --nofork &> log
[03:33] <apachelogger> no sudo
[03:33] <calwig> QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
[03:33] <calwig> Error: "/var/tmp/kdecache-pc" is owned by uid 1000 instead of uid 0.
[03:33] <calwig> QSystemTrayIcon::setVisible: No Icon set
[03:34] <DYA> welche Sie hat lust auf ein heißes gespräche ?? bitte privat melden
[03:35] <apachelogger> calwig: hit ctrl+c
[03:35] <apachelogger> kate log
[03:35] <apachelogger> paste the content
[03:48] <calwig> heißes gespräche? ja, mein Rechner funktioniert nicht. Das ist ja schon heiß!
[03:49] <calwig> apachelogger, i copied it from terminal, into kate, into here..
[03:51] <apachelogger> all this german makes me dizzy
[03:51] <apachelogger> calwig: no, the command I gave you *created* a file called 'log' which you can open with kate, it has more information
[03:51] <apachelogger> or so I hope
[03:52] <calwig> when i run the command, i get another terminal and cat log. gives only "QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave."
[03:53] <calwig> thats it
[03:54] <apachelogger> :|
[03:54] <apachelogger> calwig: best report a bug on bugs.kde.org
[03:54] <apachelogger> particularly since I need to go to bed ^^
[03:54] <calwig> hehe, no probs, big help man
[03:55] <calwig> thx, i just dont know wtf happened, i imported all my junk fine. error free.
[03:56] <calwig> nite man
=== alainus[-_-] is now known as alainus
[04:11] <roasted> hello friends
[04:12] <roasted> anybody know what the latest current kernel is for 12.10?
[04:12] <Linuks83> hello all, i've got an atheros ar9287 adapter and it will not connect at 802.11n speeds. b/g only... i checked here (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1046800) and downloaded / installed the 3.6 kernel, but no joy after a reboot.
[04:12] <ubottu> Launchpad bug 1046800 in linux (Ubuntu) "Wi-Fi intermittent and slow -- Atheros AR9287 ath9k" [Medium,Fix released]
[05:02] <nell> hey anyone here use aurora or nightly
=== ishan is now known as ishan_jain
[07:08] <novaisabadcat> apachelogger: are you around?
[08:03] <Ab3L> i've a little problem with some plasmoids. after an update two useful plasmoids are found completely down, after the bottom border of the screen and two other plasmoids are somewhere out of the screen. then it is impossible to replace them at the right position.
[08:08] <Ab3L> here you can see a "folder view" and a "disk use" on the bottom of the screen, but no sight of "search and run" and "show an image" : http://wstaw.org/m/2013/03/09/plasma-desktopQd2090.png
[08:09] <Ab3L> (and the two you can see are completely useless there)
[08:20] <jman074> lord you here
[08:36] <jman074> so i was  installing  ubuntu 12. it said it needed to restart comp to finish. i cant tell if it did anything it all looks the same.
[08:40] <jman074> (03:36:20 AM) jara: so i was  installing  ubuntu 12. it said it needed to restart comp to finish. i cant tell if it did anything it all looks the same.
[08:46] <jman074> is everyone sleepin
[08:52] <lordievader> Hey jman074, how are you?
[08:54] <jman074> hey there
[08:55] <jman074> i personally could use a little more sleep
[08:55] <jman074> but other then that good
[08:55] <jman074> how are you
[08:55] <lordievader> jman074: I'm doing good :)
[08:56] <lordievader> jman074: As to your problem, what is the output of "lsb_release -a"?
[08:57] <jman074> brb
[08:57] <jman074> command not found
[08:58] <jman074> lord i gotta go get something ill be back in like twenty
[08:58] <lordievader> jman074: I'm at my parents not sure if I will be around, just ping me to see.
[08:59] <jman074> roger what can i do to see what version i am running
[09:00] <jman074> it was installing then restarted but everthing still looks the same and is runnin okay but i dont know if it finished the install
[09:06] <mandoguit> the lsb_release -a command should work  (don't include the quote marks as per lordievader  comment
[09:10] <mandoguit> imho though the best utility for showing information is the inxi script (available at http://code.google.com/p/inxi/)    shows all kinds of great info.   for example just by typing     inxi -S    the following information is displayed    System:    Host: HP-dv7-KDE Kernel: 3.8.0-11-generic x86_64 (64 bit)  Desktop: KDE 4.10.1 Distro: Ubuntu Raring Ringtail (development branch)
[09:12] <mandoguit> want to see at a glance what your networking stuff is like       inxi -Nx       propman@HP-dv7-KDE:~$ inxi -S
[09:12] <mandoguit> System:    Host: HP-dv7-KDE Kernel: 3.8.0-11-generic x86_64 (64 bit)
[09:12] <mandoguit>            Desktop: KDE 4.10.1 Distro: Ubuntu Raring Ringtail (development branch)
[09:12] <mandoguit> propman@HP-dv7-KDE:~$ inxi -Nx
[09:12] <mandoguit> Network:   Card-1: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller
[09:12] <mandoguit>            driver: r ver: 2.3LK-NAPI port: 3000 bus-ID: 05:00.0
[09:12] <FloodBotK1> mandoguit: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[09:12] <mandoguit>            Card-2: Intel PRO/Wireless 5100 AGN [Shiloh] Network Connection driver: iwlwifi ver: in-tree: bus-ID: 02:00.0
[09:12] <mandoguit> silly bot
[09:13] <mandoguit> anyways   just a thought.............
[09:32] <jman074> i entered the command just like you descibed and it still says not found
[09:32] <lordievader> jman074: lsb_release is not found? (It is an _ btw not a -)
[09:33] <jman074> No LSB modules are available.
[09:33] <jman074> Distributor ID:	Ubuntu
[09:33] <jman074> Description:	Ubuntu 12.04.2 LTS
[09:33] <jman074> Release:	12.04
[09:33] <jman074> Codename:	precise
[09:33] <FloodBotK1> jman074: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[09:34] <jman074> so i guess i got the latest version
[09:34] <lordievader> jman074: There is your answer, you are running 12.04.2 (Precise). Or at least that is what your system thinks.
[09:34] <jman074> its weird cuz everything looks the same
[09:35] <lordievader> jman074: Perhaps 11.10 already had Unity? Anyhow I still recommend installing Kubuntu, however I'm biased...
[09:35] <jman074> all good everything is working fine and they say if it aint broke don't fix it lol
[09:36] <lordievader> Unity is broken... :P
[09:36] <jman074> whats the diff in ku and ub
[09:36] <lordievader> This is coming from someone who doesn't like Unity, so take it with a grain of salt. In 12.04 it was heavily improved over 11.10.
[09:37] <lordievader> jman074: Kubuntu runs the KDE desktop, Ubuntu uses Unity (Unity is build upon gnome)
[09:37] <jman074> oh
[09:39] <jman074> what kind of virus pro do you use
[09:39] <lordievader> jman074: http://www.youtube.com/watch?v=B0QhIVmP054
[09:39] <lordievader> jman074: This is linux :) No need for such things.
[09:40] <jman074> so clicking a link or downloaded something from an email won't hurt
[09:42] <jman074> ill check it out
[09:42] <lordievader> jman074: The majority of virusses are written for windows, these don't run on linux. Ofcourse it is still a bit of common-sense, as with everything on the internet. There are scripts that can destroy your system.
[09:43] <jman074> tru
=== FabianB is now known as Guest60979
=== shantanu is now known as TWBANGALORE
=== federico is now known as Guest68643
[10:21] <Ab3L> i've a little problem with some plasmoids. after an update two useful plasmoids are found completely down, after the bottom border of the screen and two other plasmoids are somewhere out of the screen. then it is impossible to replace them at the right position.
[10:22] <Ab3L> here you can see a "folder view" and a "disk use" on the bottom of the screen, but no sight of "search and run" and "show an image" : http://wstaw.org/m/2013/03/09/plasma-desktopQd2090.png
[10:22] <Ab3L> (and the two you can see are completely useless there)
[10:23] <Ab3L> Do someone know how to change the position of those misplaced plasmoids?
[10:23] <Ab3L> *Does
[10:28] <Ab3L> for those at the bottom (see print screen) i've found a solution. but how to recover those that are out of the screen?
=== moji_ is now known as moji
=== BTCOxygen|1 is now known as BTCOxygen
[12:53] <Roey> is jriddell ever here?
[12:54] <lordievader> Roey: He is usually in #kubuntu-devel
[12:59] <Roey> aaaah
[12:59] <Roey> ok thank you
[13:03] <Ab3L> i've a little problem with some plasmoids. after an update two useful plasmoids are found completely misplaced out of the border of the screen and it is impossible to replace them at the right position. does someone know how to set this problem? (at least close those two plasmoids and readd them again to the desktop?)
=== spawn[dead] is now known as spawn57
[13:42] <onebitX> hi to all
[13:42] <onebitX> is there someone that md5sums all his system and release ths info on internet?
[13:59] <minerals> could somebody point me on the right place to look for an error here ? http://pastebin.com/dPH0zRf6
[14:13] <shadeslayer> !find asm/system.h
[14:13] <ubottu> File asm/system.h found in linux-headers-3.5.0-17, linux-headers-3.5.0-18, linux-headers-3.5.0-19, linux-headers-3.5.0-21, linux-headers-3.5.0-22, linux-headers-3.5.0-23, linux-headers-3.5.0-24, linux-headers-3.5.0-25
[14:13] <shadeslayer> minerals: ^ you need the headers
[14:14] <shadeslayer> you want to install linux-headers-generic
[14:14] <murthy> hello everyone
[14:33] <BluesKaj> Howdy all
=== julian is now known as Guest64059
=== a is now known as Guest19296
[15:05] <vincentS> Hi all, I'm trying to unlock my session on usb insert with pamusb it locks on ejection and is unlockable without password after injection but i want it to unlock without clicking unlock. so i was looking how to submit a keypress to that window or something?
[15:07] <lordievader> vincentS: Use xdotool: xdotool key KP_Enter
[15:19] <vincentS> lordievader, thanks for pointing to that i will look into it just tried it and i got stuck in the kscreenlocker_greet it seemed to have submitted the enter and kscreenlocker_greet disapeard but a black screen came and on mouse movement kscreenlocker_greet came up again and was unlockable even with password. so i killed it :P
[15:21] <lordievader> vincentS: If it complains about not finding the display or X run "export DISPLAY=:0" before the xdotool command.
[15:32] <jman074> how can i access a device through usb that the maker hasn't made it usable with linux.
[15:33] <lordievader> What kind of device are we talking about here?
[15:35] <jman074> a playstation vita.  http://cma.dl.playstation.net/cma/  you have to download the content manager to transfer files. it can also be accessed as a mass storage device somehow
[15:36] <lordievader> jman074: Can you pastebin the output of "sudo fdisk -l"
[15:37] <vincentS> lordievader, it was my fault for not reloading the conf. Your line worked perfect thank u so much :D
[15:39] <jman074> http://paste.kde.org/691298/
[15:39] <lordievader> vincentS: No problem, glad it works ;)
[15:40] <lordievader> jman074: Do you have a secondary hard-drive in your pc?
[15:41] <jman074> i have one external and then the vita is connected as well
[15:42] <BluesKaj> jman074, run lsusb , to see if it shows up there
[15:43] <jman074> i do see sony corp
[15:44] <kdef> I have a question about installing a daily build ... I guess it is 13.04?
[15:44] <vincentS> vita  lsusb output http://paste.kde.org/691304/
[15:45] <jman074> command not found vincent
=== marco is now known as Guest19034
[15:46] <hololight> Perhaps the following is intended behavior, but... whenever I am downloading a torrent with a magnet link, and 'Examining' Job appears in the jobs notification area. Only thing is, it never goes away. Even after the torrent is completed. The only way to rid myself of it is to press the stop button in the notification but to me, that would imply to stop 'Examining' it.
=== Guest19034 is now known as marcovich
[15:46] <vincentS> jman074,  no i just posted the output  do  " lsusb -v -s 001:012 "    wheree 001:012 is ur sony corp device
[15:47] <marcovich> giorno piovoso a tutti
[15:47] <lordievader> !it | marcovich
[15:47] <ubottu> marcovich: Vai su #ubuntu-it se vuoi parlare in italiano, in questo canale usiamo solo l'inglese. Grazie! (per entrare, scrivi « /join #ubuntu-it » senza virgolette)
[15:48] <marcovich> salve
[15:48] <lordievader> kdef: Yes the daily is probably 13.04. However there is a precise daily, last one is from: 2013-03-09
[15:49] <jman074> nothin happened
[15:50] <BluesKaj> jman074, ok try blkid , if it gives a UUID then you may be able to mount it in fstab , but I don't know what you can use it for in Linux , you'll still need to do that convoluted install to run netfix ,.if that's what you're after
[15:50] <kdef> vader: do you know if there is a screensaver problem?   or a problem with X?   When screen sleeps, it crashes... when the mouse is moved, nothing happens
[15:51] <BluesKaj> er netflix
[15:51] <cloakable> I'm trying to use the pulseaudio echo-cancel module in kubuntu 12.10, but it's only creating a mono sink. My speakers are stereo, and any audio played through the echo-cancelled sink is reduced to mono. Is this happening for anyone else, and how can I get the sink in stereo?
[15:51] <vincentS> jman074, if u do only lsusb you find ur vita bus and device
[15:52] <jman074> if i only do lsusb i find a sony corp and the vita is the only sony product i have
[15:52] <lordievader> kdef: I do have a bug with kscreenlocker, but it ain't anything serious: https://bugs.kde.org/show_bug.cgi?id=315093
[15:52] <ubottu> KDE bug 315093 in locker-qml "application loses focus after unlocking the screensaver" [Minor,Unconfirmed]
[15:54] <BluesKaj> jman074, what do you want to do with the PS on kubuntu?
[15:54] <kdef> also, I want to install smth from repo...but, there is no mention of 13.04... only 12.10 .... you know google drive?
[15:54] <jman074> i have ubuntu and i want to transfer audio and vidio files
[15:55] <kdef> might not work?   I have no idea :-/
[15:56] <jman074> there is always a way. i read that you can make it look like a mass storage device.
[15:56] <BluesKaj> jman074, run blkid and find the PS or pastebin the output
[15:56] <kdef> and how is that a minor bug?  how do you restore?
[15:56] <lordievader> kdef: I looked into Gdrive a bit at the lauch, there was no linux client, haven't checked it out since.
=== marcovich is now known as Guest19034
=== Guest19034 is now known as marcovich
[15:57] <kdef> vader:  oh, I'll be using insync ....
[15:57] <jman074> nothin happens with blkid
[15:57] <lordievader> kdef: With minor bug I was refering to my bug. Focus is easily enough given back to an application.
[16:00] <BluesKaj> jman074 , try sudo blkid then
[16:00] <vincentS> hmm i tried installing the content manger for vita trough wine but windows mediaplayer is needed
[16:01] <jman074> gotta run to work be back shortl
[16:01] <kdef> I think I'll re-install 12.10... 13.04 has too many bugs... especially with the screensaver
[16:02] <BluesKaj> kdef, did you update/upgrade after installing 13.04
[16:02] <kdef> the screen goes black and no way to unlock the screen...
[16:02] <BluesKaj> ?
[16:02] <lordievader> kdef: Be sure to report these bugs!
[16:02] <BluesKaj> kdef did you try the esc  key
[16:02] <vincentS> kdef, there is always a way to unlock ;)
[16:02] <kdef> how can I report it?   the screen goes black and system is unusable
[16:03] <vincentS> ??
[16:03] <kdef> unless, there is a log for what happened?
[16:03] <lordievader> kdef: Tty is no longer available?
[16:03] <vincentS> kdef, cant you jump to another tty
[16:04] <kdef> I'll have to check... I'm not at that computer right now....AFAIK or can remember, the screen is locked / screen is blank so was cold rebooting
[16:05] <BluesKaj> kdef, don't use the screensaver , turn it off
[16:07] <aloha> :-)
=== aloha is now known as alohajo9
[16:08] <alohajo9> join-ubuntu.it
[16:10] <BluesKaj> BBL..
[16:25] <infestus> I'm comparing a few KDE distros atm, especially their configuration guis. I can't find a few things in kubuntu: gui for configuring which services are started during boot, gui for configuring the bootloader, gui for setting up samba/nfs shares, gui for configuring the firewall. Are there no guis for these things in kubuntu or did I overlook them?
=== spawn57 is now known as spawn[dead]
[16:35] <apachelogger> infestus: bootloader kde-config-grub2, samba is integrated within dolphin... the other two we have no gui by design (e.g. we also have no firewall as ther eis a policy against having open ports in a default install to begin with)
[16:36] <apachelogger> though there may be something 3rd party in the repos
[16:36] <apachelogger> dunno
[16:36] <infestus> ok, thank you
[16:36] <lordievader> Services is there, ain't it?
[16:36] <lordievader> Under startup and shutdown.
[16:38] <apachelogger> that's session services started at login/after login
[16:38] <lordievader> Ah I see.
[16:51] <vincentS> whats this +  means drwxr-x---+  ive never seen it before ?
[16:52] <DeaD_EyE> good question
[16:53] <DeaD_EyE> google has good answers
[16:53] <DeaD_EyE> this are acl permissions
[16:53] <DeaD_EyE> man getfacl
[16:53] <DeaD_EyE> man setfacl
[17:33] <jman074> need help making my comp recognize a multimedia device
[17:37] <jman074> wakey wakey eggs and bakey
[17:47] <jman074> need help making my comp recognize a multimedia device
[18:03] <jman074> need help making my comp recognize a multimedia device
[18:06] <DarthFrog> !patience | jman074
[18:06] <ubottu> jman074: Don't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. You can search https://help.ubuntu.com/ http://www.ubuntuforums.org/ or http://www.kubuntuforums.net/ while you wait.
[18:07] <jman074> k sorry
[18:07] <DarthFrog> jman074:  Rather than give bland, general requests for help, you're much more likely to get help with a directed, specific request.
[18:13] <jman074> okay im trying to connect my ps vita to  my computer to transfer video and audio files. normally you download a content manager from playstation.com but it only offers windows and mac. this devise can be recognize as a mass storage device as well
[18:15] <DarthFrog> If it's recognised as a mass storage device, why can't you just use Dolphin to do your file transfers?
[18:17] <hazamonzo> Hey folks. Little weird but for whatever reason.. i can't uto complete package names when i do sudo apt-get install g<Hit Tab here to auto complete>
[18:18] <hazamonzo> Any reason that might be happening?
[18:19] <jman074> on windows before you open the content manager it recognizes it as a mass storage device. my ubuntu doesn't even recognize it
[18:19] <DarthFrog> hazamonzo:  Tap the tab key twice and see if multiple packages are offered.  Tab completion only works when there's a single answer.
[18:20] <DarthFrog> jman074:  Do you get any information from dmesg after you plug it in?
[18:20] <hazamonzo> DarthFrog: Im a fool :)
[18:21] <jman074> no
[18:21] <hazamonzo> DarthFrog: I thought i hot tab a couple of times. Im used to installing things via apt-get too :)
[18:21] <hazamonzo> Cheers!!
[18:21] <hazamonzo> *hit
[18:21] <DarthFrog> hazamonzo:  LOL!  Enjoy your rest in bed tonight, as you relive this conversation. :-)   I've been there far too often myself.
[18:22] <hazamonzo> DarthFrog: lol! :D
[18:22] <hazamonzo> Thanks mate :)
[18:22] <DarthFrog> You're welcome.
[18:22] <DarthFrog> jman074:  Does the device use the MTP file system protocol?
[18:23] <jman074> i don't know
=== murthy is now known as murthy_
[18:50] <Ab3L> hi. how can I know if my kubuntu 12.04 has Qt4 or Qt5 or whatelse?
[19:00] <ovidius2> hi. is this the right room for questions about kubuntu 13.04?
[19:18] <vincentS> Ab3L, kde4-config --version
[19:23] <Ab3L> vincentS: thank you
[19:28] <ronalds> I have kde fully installed on ubuntu, can I remove kde accesible tray?
[20:24] <Sennar> hi i am to try to color the term in PS1='\[\e[1;31m\]\t \[\e[34;1m\]\u\[\e[m\]@\[\e[1;32m\]\h\[\e[m\] \[\e[1;34m\]\w\[\e[m\] \[\e[0;33m\]\$\[\e[m\] ' in /home/.bashrc but don't change color
[20:24] <Sennar> who can help me?
[20:26] <apie1> Sennar: did you try to open a new terminal?
[20:34] <lordievader> Sennar: As apie1, said the bashrc file needs to be reloaded to see the changes.
[20:50] <lordievader> Sennar: You can simply keep the conversation in the channel, also use paste.kde.org or something.
[20:50] <lordievader> Can you paste it there again...
[20:50] <lordievader> ?
[20:52] <lordievader> Sennar: Uncomment the force_color_prompt.
[20:53] <Ab3L> i'm trying to compile kvirc. but i need openssl support. i don't know which libraries i've to install. could you help me?
[20:54] <yofel> Ab3L: libssl-dev would be my first guess
[20:56] <apie1> lordievader: solved
[20:56] <lordievader> apie1: Ah nice ;)
[20:56] <Ab3L> yofel: yes. it seems it's the good choice
[21:16] <Sidd> hi all, I'm new in Kubuntu 12.10 x64
[21:17] <Sidd> I'm trying to install compiz with greybird theme, for compiz it's ok for now but I do not know how to use greybird theme, anyone can avoid me please ?
[21:17] <Sennar> uh i am not alone !!! :D
[21:17] <Sidd> I have try some docs on the web, but there are not working
[21:21] <lordievader> Hmm, he's gone. Wanted to say that we have KWin...
[21:42] <amigamia> hi i am running 10.04 lts ubuntu and i am worried cause i prefer the interface that i like with gnome. is there any option with kubuntu for me to maintain this functional environment?
[21:45] <away> amigamia, basically you want kubuntu with gnome 2 as DE?
=== xtreme is now known as bluu
=== bluu is now known as blue
=== marco is now known as Guest25489
=== FabianB is now known as Guest8906
=== Guest8906 is now known as Fabian
=== Fabian is now known as FabianBu
=== matteo is now known as Guest44293