/srv/irclogs.ubuntu.com/2013/03/29/#ubuntu-server.txt

dandkburtlooking for a member that knows Postfix mail server02:56
patdk-lap!ask02:57
ubottuPlease don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience02:57
dandkburtI am not asking to ask02:57
dandkburtI am seeking a person02:57
patdk-lapok, you didn't even ask anything infact02:57
holsteindandkburt: i think the suggestion is to just ask the question02:57
patdk-lapjust making random comments?02:57
dandkburtno02:58
dandkburt not randome02:58
dandkburtwant someone to assist me on installing and configureing it on my net02:58
patdk-lapthat is what the server guide was made for02:58
dandkburtand if something that arises that is not in the server guide02:59
patdk-lapdo you have a specific question about something not covered?02:59
dandkburtguess this room is falsly advertised02:59
patdk-lapodd, people trust random people on irc, over the documented instructions?03:00
LargePrimeok give the ip and the root password03:01
LargePrimederp03:01
lamontheh03:01
=== blkperl_ is now known as blkperl
Fieldyis there a way to install gallery via apt that does not pull in apache? i use lighttpd03:51
dandkburtSMTP server error: 4.3.0 Temporary system failure. Please try again later.03:59
patdk-lapfieldy, --no-install-recommends ?04:05
Fieldypatdk-lap: i wasn't aware of that option, thanks i'll check it out04:05
Fieldystill pulling in apache unfortunately04:06
patdk-lapheh, it's worse than I thought then04:06
patdk-lapthen I don't believe there is any fix, other than to fix the packaging04:07
patdk-lapor maybe there is an ignore depends option04:07
Fieldyi'm accustomed to installing and maintaining gallery manually, i'll just continue to go that route, i was merely hoping not to04:07
dandkburtSMTP server error: 4.3.0 Temporary system failure. Please try again later.04:07
dandkburtanyone know how to fix this04:08
Fieldydandkburt: if you have a question, you might want to ask it :)04:08
Fieldylook in your smtp servers logs / error logs, it should tell you more04:08
dandkburtwhere would I find the logs04:08
BrassDragoonHow do I set vsftpd up to only allow access to a certain directory?04:48
adjenhi05:01
adjeni discover a new great exploit to get root take a look  http://ro0t.dyndns-server.com/05:01
Iapetusjust a drunk05:07
=== security is now known as fire
dandkburtok05:22
dandkburtI am getting these errors05:22
dandkburtnow05:22
dandkburthow do I fix05:22
dandkburtMar 29 01:18:05 ddb postfix/smtpd[19037]: warning: SASL: Connect to private/auth-client failed: No such file or directory05:23
dandkburtMar 29 01:18:05 ddb postfix/smtpd[19037]: fatal: no SASL authentication mechanisms05:23
ScottKdandkburt: You probably have postfix in a chroot (this is in the Debian/Ubuntu default) and have not configured SASL to work with the chroot.05:24
ScottKIIRC, the server guide (in /topic) explains how to configure it.05:24
BrassDragoongot vsftpd running, but after restart I keep getting this05:36
BrassDragoonroot@box:~# service vsftpd start05:36
BrassDragoonvsftpd start/running, process 421805:36
BrassDragoonbut then it doesn't show up as a running task anywhere, and killall doesn't detect it05:36
BrassDragoonhalp?05:36
=== LargePrime is now known as Guest76845
=== LargePrime_ is now known as LargePrime
koyetsuis there a way other than restarting the iscsitarget server to add additional targets? reason i'm asking is it won't let a restart happen is the target is actually being used05:48
=== acrocity_ is now known as acrocity
=== Sargun_ is now known as Sargun
=== ToBeFree is now known as SoulOfTheInterne
=== SoulOfTheInterne is now known as ToBeFree
rigvedhi everone.10:50
rigvedI have ubuntu 12.04 running on a VPS with OpenVZ. I have installed apparmor but it does not seem to be loaded.10:50
rigvedwhen i run "sudo apparmor_status", I get the message: apparmor module is not loaded.10:51
rigvedI cannot find any error message in /var/log/syslog or messages or dmesg or kern.log. It seems to be related to this bug: 11388710:52
rigvedCan anyone help to get apparmor started?10:53
kerframilrigved: you're running in a container so it's not going to happen11:12
rigvedkerframil: ok. i understood. since the kernel is on the host. thanks for your help!11:13
mpoppis there a reliable test to check whether all cores of my two cpu server are being used?11:18
mpopphtop11:31
agu10^i have an issue with node.js11:35
agu10^NODEMON is not reading .nodemonignore11:35
=== FUF_ is now known as FUF
Ul_hello everybody. having problems setting up interface bonding. having 4 servers with 4 bonded nic each. the bond device comes up with the right address but I can only ping the ip address of the bond device of the host i'm on. can't ping the other hosts. bonding mode is balance-rr13:38
Ul_the file /proc/net/bonding/bond1 shows MII Status: down13:39
Ul_and ideas what could be the problem?13:39
=== wedgwood_away is now known as wedgwood
Ul_found that the devices are not enslaved after boot. if i do a manual ifenslave bond1 eth1 eth2 eth3 eth5 then it works fine15:01
Ul_even though speed is not 4 GBit but onlt 2.2 GBit15:01
Ul_with balance-rr15:01
rigvedit seems that the dovecot-related configuration (in dovecot and in the postfix-dovecot integration as well) mentioned here: https://help.ubuntu.com/12.04/serverguide/ is again dovecot version 1. However, version 2 is installed by default in ubuntu 12.04.15:10
rigved*against15:10
sorenUl_: What does your /etc/network/interfaces say?15:11
rigvedwhat is the appropriate place to discuss this? any mailing list?15:11
foxxxxhey, did any of you guys got xen 4.1 to work with ubuntu server 12.04 ? just did a fresh install but when i try to boot the xen entry it hangs at: "Panic on CPU 0: FATAL PAGE FAULT ..."15:13
Underbytequestion: when i try and login from my server with my normal username, i get this error: "The system is going down for maintenance in 3 minutes!"15:17
Underbytebut when i investigate...15:18
Underbyteroot@dev:/# shutdown -c15:18
Underbyteshutdown: Cannot find pid of running shutdown15:18
Underbyteany ideas?15:18
Underbyte(login == ssh in this case)15:18
rigvedfoxxxx: is this similar to this: http://ubuntuforums.org/showthread.php?t=2120482 ?15:19
foxxxxyep totally15:19
foxxxxnow i'm compiling the xen-4.2.1 from source15:37
foxxxxlet's see if that changes anything15:37
foxxxxwhat i'm just curious about15:38
foxxxxthis actual machine was running debian squeeze with xen-4.0 perfectly fine15:38
foxxxxi just had some other issues with debian old-packages, etc...15:38
foxxxxso i switched to ubuntu-server 12.04 today15:38
foxxxxalready tested ubuntu-server 12.04 with xen-4.1 in a virtual machine where it boots fine too, but not on this particular hardware somehow15:39
Ul_slaves eth1 eth2 eth3 eth515:41
Ul_also tried with15:41
Ul_up /sbin/ifenslave eth1 eth2 eth3 eth515:41
Ul_but they are not enslaved after boot15:42
Ul_bye everybody ... will look into this later15:56
=== Nafallo_ is now known as Nafallo
=== k1ng440 is now known as k1ng
=== pgraner-afk is now known as pgraner
=== wedgwood is now known as wedgwood_away
=== wedgwood_away is now known as wedgwood
=== Rallias is now known as Rallias-Plugged
gynnahttp://xeroticmomentsx.blogspot.com/2013/03/amateurgallery.html21:04
sarnoldstgraber: I'm a bit confused by convert_tuple_to_char_pointer_array(); the memcpy() looks like it could be replaced by a simple assignment with = -- am I misunderstanding something important? :)22:17
=== Rallias-Plugged is now known as Rallias
=== wedgwood is now known as wedgwood_away

Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!