[02:56] <dandkburt> looking for a member that knows Postfix mail server
[02:57] <patdk-lap> !ask
[02:57] <dandkburt> I am not asking to ask
[02:57] <dandkburt> I am seeking a person
[02:57] <patdk-lap> ok, you didn't even ask anything infact
[02:57] <holstein> dandkburt: i think the suggestion is to just ask the question
[02:57] <patdk-lap> just making random comments?
[02:58] <dandkburt> no
[02:58] <dandkburt>  not randome
[02:58] <dandkburt> want someone to assist me on installing and configureing it on my net
[02:58] <patdk-lap> that is what the server guide was made for
[02:59] <dandkburt> and if something that arises that is not in the server guide
[02:59] <patdk-lap> do you have a specific question about something not covered?
[02:59] <dandkburt> guess this room is falsly advertised
[03:00] <patdk-lap> odd, people trust random people on irc, over the documented instructions?
[03:01] <LargePrime> ok give the ip and the root password
[03:01] <LargePrime> derp
[03:01] <lamont> heh
[03:51] <Fieldy> is there a way to install gallery via apt that does not pull in apache? i use lighttpd
[03:59] <dandkburt> SMTP server error: 4.3.0 Temporary system failure. Please try again later.
[04:05] <patdk-lap> fieldy, --no-install-recommends ?
[04:05] <Fieldy> patdk-lap: i wasn't aware of that option, thanks i'll check it out
[04:06] <Fieldy> still pulling in apache unfortunately
[04:06] <patdk-lap> heh, it's worse than I thought then
[04:07] <patdk-lap> then I don't believe there is any fix, other than to fix the packaging
[04:07] <patdk-lap> or maybe there is an ignore depends option
[04:07] <Fieldy> i'm accustomed to installing and maintaining gallery manually, i'll just continue to go that route, i was merely hoping not to
[04:07] <dandkburt> SMTP server error: 4.3.0 Temporary system failure. Please try again later.
[04:08] <dandkburt> anyone know how to fix this
[04:08] <Fieldy> dandkburt: if you have a question, you might want to ask it :)
[04:08] <Fieldy> look in your smtp servers logs / error logs, it should tell you more
[04:08] <dandkburt> where would I find the logs
[04:48] <BrassDragoon> How do I set vsftpd up to only allow access to a certain directory?
[05:01] <adjen> hi
[05:01] <adjen> i discover a new great exploit to get root take a look  http://ro0t.dyndns-server.com/
[05:07] <Iapetus> just a drunk
[05:22] <dandkburt> ok
[05:22] <dandkburt> I am getting these errors
[05:22] <dandkburt> now
[05:22] <dandkburt> how do I fix
[05:23] <dandkburt> Mar 29 01:18:05 ddb postfix/smtpd[19037]: warning: SASL: Connect to private/auth-client failed: No such file or directory
[05:23] <dandkburt> Mar 29 01:18:05 ddb postfix/smtpd[19037]: fatal: no SASL authentication mechanisms
[05:24] <ScottK> dandkburt: You probably have postfix in a chroot (this is in the Debian/Ubuntu default) and have not configured SASL to work with the chroot.
[05:24] <ScottK> IIRC, the server guide (in /topic) explains how to configure it.
[05:36] <BrassDragoon> got vsftpd running, but after restart I keep getting this
[05:36] <BrassDragoon> root@box:~# service vsftpd start
[05:36] <BrassDragoon> vsftpd start/running, process 4218
[05:36] <BrassDragoon> but then it doesn't show up as a running task anywhere, and killall doesn't detect it
[05:36] <BrassDragoon> halp?
[05:48] <koyetsu> is there a way other than restarting the iscsitarget server to add additional targets? reason i'm asking is it won't let a restart happen is the target is actually being used
[10:50] <rigved> hi everone.
[10:50] <rigved> I have ubuntu 12.04 running on a VPS with OpenVZ. I have installed apparmor but it does not seem to be loaded.
[10:51] <rigved> when i run "sudo apparmor_status", I get the message: apparmor module is not loaded.
[10:52] <rigved> I cannot find any error message in /var/log/syslog or messages or dmesg or kern.log. It seems to be related to this bug: 113887
[10:53] <rigved> Can anyone help to get apparmor started?
[11:12] <kerframil> rigved: you're running in a container so it's not going to happen
[11:13] <rigved> kerframil: ok. i understood. since the kernel is on the host. thanks for your help!
[11:18] <mpopp> is there a reliable test to check whether all cores of my two cpu server are being used?
[11:31] <mpopp> htop
[11:35] <agu10^> i have an issue with node.js
[11:35] <agu10^> NODEMON is not reading .nodemonignore
[13:38] <Ul_> hello everybody. having problems setting up interface bonding. having 4 servers with 4 bonded nic each. the bond device comes up with the right address but I can only ping the ip address of the bond device of the host i'm on. can't ping the other hosts. bonding mode is balance-rr
[13:39] <Ul_> the file /proc/net/bonding/bond1 shows MII Status: down
[13:39] <Ul_> and ideas what could be the problem?
[15:01] <Ul_> found that the devices are not enslaved after boot. if i do a manual ifenslave bond1 eth1 eth2 eth3 eth5 then it works fine
[15:01] <Ul_> even though speed is not 4 GBit but onlt 2.2 GBit
[15:01] <Ul_> with balance-rr
[15:10] <rigved> it seems that the dovecot-related configuration (in dovecot and in the postfix-dovecot integration as well) mentioned here: https://help.ubuntu.com/12.04/serverguide/ is again dovecot version 1. However, version 2 is installed by default in ubuntu 12.04.
[15:10] <rigved> *against
[15:11] <soren> Ul_: What does your /etc/network/interfaces say?
[15:11] <rigved> what is the appropriate place to discuss this? any mailing list?
[15:13] <foxxxx> hey, did any of you guys got xen 4.1 to work with ubuntu server 12.04 ? just did a fresh install but when i try to boot the xen entry it hangs at: "Panic on CPU 0: FATAL PAGE FAULT ..."
[15:17] <Underbyte> question: when i try and login from my server with my normal username, i get this error: "The system is going down for maintenance in 3 minutes!"
[15:18] <Underbyte> but when i investigate...
[15:18] <Underbyte> root@dev:/# shutdown -c
[15:18] <Underbyte> shutdown: Cannot find pid of running shutdown
[15:18] <Underbyte> any ideas?
[15:18] <Underbyte> (login == ssh in this case)
[15:19] <rigved> foxxxx: is this similar to this: http://ubuntuforums.org/showthread.php?t=2120482 ?
[15:19] <foxxxx> yep totally
[15:37] <foxxxx> now i'm compiling the xen-4.2.1 from source
[15:37] <foxxxx> let's see if that changes anything
[15:38] <foxxxx> what i'm just curious about
[15:38] <foxxxx> this actual machine was running debian squeeze with xen-4.0 perfectly fine
[15:38] <foxxxx> i just had some other issues with debian old-packages, etc...
[15:38] <foxxxx> so i switched to ubuntu-server 12.04 today
[15:39] <foxxxx> already tested ubuntu-server 12.04 with xen-4.1 in a virtual machine where it boots fine too, but not on this particular hardware somehow
[15:41] <Ul_> slaves eth1 eth2 eth3 eth5
[15:41] <Ul_> also tried with
[15:41] <Ul_> up /sbin/ifenslave eth1 eth2 eth3 eth5
[15:42] <Ul_> but they are not enslaved after boot
[15:56] <Ul_> bye everybody ... will look into this later
[21:04] <gynna> http://xeroticmomentsx.blogspot.com/2013/03/amateurgallery.html
[22:17] <sarnold> stgraber: I'm a bit confused by convert_tuple_to_char_pointer_array(); the memcpy() looks like it could be replaced by a simple assignment with = -- am I misunderstanding something important? :)