Apesjrib: Because I would like something added to root's PATH00:00
jribApes: yes, obviously.  I'm asking you to be more specific00:00
ApesI'm not sure what you mean00:00
ApesThat's already pretty specific, I thought00:01
jribApes: what do you want to add to root's PATH?00:01
ApesA directory containing binaries that I trust00:01
munzmania87hi! i have just installed ubuntu 13.04 :-D and i want to install the ati driver !  i am using an old laptop and the cpu fan makes alot of noise so hopefully installing the driver would help .... can you help me plz ?00:01
jribApes: ok, good luck with your issue00:01
jrib!ati | munzmania8700:02
ubottumunzmania87: For Ati/NVidia/Matrox video cards, see https://help.ubuntu.com/community/VideoDriverHowto00:02
munzmania87@ubottu : thnx :)00:03
PoolShark_1so is anyone here good with raid using mdadm?00:05
histo!anyone | PoolShark_100:06
ubottuPoolShark_1: A high percentage of the first questions asked in this channel start with "Does anyone/anybody..." Why not ask your next question (the real one) and find out? See also !details, !gq, and !poll.00:06
munzmania87@ubottu  : where can i find the "hardware drivers manager" ?!00:07
PoolShark_1becuase I've already asked it twice and not gotten any response at all, perhaps? :p00:07
histomunzmania87: system settings > software sources > hardware tab00:07
histo!raid | PoolShark_100:07
ubottuPoolShark_1: Tips and tricks for RAID and LVM can be found on https://help.ubuntu.com/community/Installation/SoftwareRAID and http://www.tldp.org/HOWTO/LVM-HOWTO - For software RAID, see https://help.ubuntu.com/community/FakeRaidHowto00:07
munzmania87@histo : thnx00:07
PoolShark_1so rather than type the whole thing out again, I'll first establish a connection and then ask... TCP rather than UDP, so to speak00:07
zivesterDoes anyone know what device I should use for bootloader installation on a macbook pro?00:08
histo!mac | zivester00:08
ubottuzivester: For help on installing and using Ubuntu on a mac, see: https://wiki.ubuntu.com/MactelSupportTeam/CommunityHelpPages00:08
PoolShark_1but if you must know, I'm just trying to figure out why this thing is taking hours and hours and hours to sync up my new array00:08
testroothow can i know what gpu i am using right now?00:09
histotestroot: lspci -k00:09
zivesterhisto, do you have experience with the install? its not exactly updated for my 10,1 macbook00:09
zivesterJordan_U, happen to be around?00:10
munzmania87@histo : i could not find software sources under "system settings" ,,,,,,, i am using 13.04!00:10
testroothisto: the thing is i have a hybrid gpu00:10
histozivester: If it's uefi I though mac people were using refid or something like that to overcome the 32bit efi stuff. But other than that I have no mac hardware00:10
histomunzmania87: No idea where they've moved it now.  Check in the software center in the menus you should be able to get to software sources. In 12.10 they moved it to a tab there.00:11
histotestroot: well if you didn't use bumblebee or optimus to run an application then it should be using the low end card00:12
testroothisto: 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09)00:12
testroot01:00.0 VGA compatible controller: NVIDIA Corporation Device 0fd3 (rev a1)00:12
testroothisto: the output of lspci -k | grep VGA00:12
zivesteryah.. I have refind installed... but when doing a manual install its asking me where to install the "bootloader" which is eery00:13
histo!nvidia | testroot00:13
ubottutestroot: For Ati/NVidia/Matrox video cards, see https://help.ubuntu.com/community/VideoDriverHowto00:13
testroothisto: the thing is the battery is way to low compared to windows so i was guessing that iam using the nvidia00:14
histotestroot: also you may have to search for hybrid graphics cards or help on askubuntu.com00:14
betraydseems to be a normal question zivester00:14
testroothisto: is there any way to know if iam using the intel?00:14
=== lance_ is now known as Guest72680
testroothisto: i dont care much now for nvidia00:15
=== elju is now known as elju_
leoloveCan I just disable CRDA on my ubuntu 13.04 and use wifi reliably? :(00:16
=== elju_ is now known as elju
=== elju is now known as elju_
=== elju_ is now known as elju
hp1004ltsHi all00:17
=== qos|away is now known as qos
betraydhey tehre00:18
hp1004ltshi all00:18
Ponch0I installed edbuntu 13.04 because edumacamation and I also installed e17 desktop but it isn't working, I think i'm using gnome 2 desktop, none of the bells and whistles come installed here I think because no effects00:20
Ponch0how do I make the pretty stuff work00:20
hp1004ltsDose anyone use the ubuntu 12.04 LTS yet.?00:20
dustinspringmanhp1004lts: been using it for months00:21
Fishscenehp1004lts: What do you mean "yet"? As in upgraded from an older LTS release?00:21
Dr_willis!info wireless-regdb00:21
ubottuwireless-regdb (source: wireless-regdb): wireless regulatory database. In component main, is optional. Version 2011.04.28-1ubuntu3 (raring), package size 6 kB, installed size 52 kB00:21
=== raw is now known as Guest57437
Dr_willisleolove,  quick google search suggests that package is what handles crda00:21
leoloveDr_willis is it safe to remove it?00:22
hp1004ltsyes  upgraded from 10.04 lts to 12.04 lts.00:23
Dr_willisleolove,  no idea.00:23
hp1004ltsone mouth great00:23
leoloveMy wifi keeps disconnecting. the last message it says in dmesg is about CRDA updating before going offline00:23
Dr_willisleolove,  all i know on the topic is in that URL i gave... all i did was google for  crda remove   and saw that url00:23
sqrt7744Hi, I'm running 13.04, and want to connect to a samba server. I see "connect to server" and can put in the address (and it connects), but I need to connect with my creds instead of as guest. How can I put in my username/password?09:38
opalepatrickquickest way to convert avi to mp4?09:39
somsipopalepatrick: ffmpeg09:39
mar_i'm trying to add my scripts directory to the path according to http://www.troubleshooters.com/linux/prepostpath.htm. $PATH gives me this "bash: /usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games: No such file or directory"09:39
opalepatrickdeprecated in 13.04 somsip should I still use it?09:40
opalepatrickany reason not to, I mean09:40
mar_.bash_profile looks like this "PATH=$PATH:/home/mar/Git/scripts; export PATH"09:40
somsipopalepatrick: it's just a library thats deprecated isn't it? Though I admit I'm not up to date with 13.0409:40
opalepatrickprobably somsip - I will play again :-)09:40
mar_opalepatrick, mkvmerge is excellent. Can't remember if it does mp4 or not09:41
somsipopalepatrick: do you want a command line for it?09:41
mar_opalepatrick, it has a GUI09:41
Ben64for good quality you'll want to use mp4box, mencoder, faac09:42
mar_opalepatrick, somsip, ffmpeg is now avconv09:42
opalepatrickI dont mind either way... actually all II want is a format that would play nice in a client blog when streamed09:42
somsipopalepatrick: http://pastebin.com/UdzTrzRU09:42
opalepatrickYes mar I jut tried iconv, got an issue and stopped :-)09:42
opalepatrickthanks a lot for that somsip09:43
somsipopalepatrick: the file is not well commented, but you should get the idea. From memory, the conversion is decent enough09:44
Gabriel403Thanks guys09:44
opalepatrickno worries I can work through that somsip - I like command line stuff... I use imagemagick and think it is wonderful :-)09:45
somsipopalepatrick: np09:45
jonywhere I can find the JDK folder in Ubuntu?09:48
sqrt7744is it possible to connect to a samba share through nautilus with username/password? (13.04)09:49
gvandeweyerdoes the ubuntu-server (12.04 lts) installer provide the option to resize an existing partition at installation time? I want to install ubuntu next to an old centOS 5.8, which is under warranty, and which I don't want to wipe out :-)09:51
stianhjjony: /usr/lib/jvm/jdk-your-version or /usr/lib/jvm/java-X-oracle if you're using that09:51
avirusxubuntu 13.04 is awesome09:51
MikeHHas MySQL data location moved in 13.04?09:52
stianhjsqrt7744: unless they've changed it, yes. File -> Connect to server, and select Windows share. You can enter username/password there09:52
MikeHI see some stuff in /var/lib/mysql but it's too small to be my database09:52
jonystianhj, for netbeans I need it09:53
sqrt7744stianhj, ah, it used to be like that. They've changed it now. You can just put in the address in the format smb://server/share09:53
twowentyanyone seen "error:failure reading sector 0x000 from 'hd0'. grub rescue>" when booting?09:54
jeanbaptiste_Can i remove the messaging menu?09:55
rindolfHi all.09:57
rindolfhttps://www.google.com/search?safe=off&q=ubuntu+glibc+dbg&oq=ubuntu+glibc+dbg&gs_l=serp.3..0i8i30.2477.2477.0.2725. - the first two links here are broken.09:57
Ben64rindolf: ok?09:57
rindolfBen64: they should be fixed.09:58
Ben64rindolf: they wont be, those are for 8.0409:58
jonystianhj, it tells me that there isn't a jdk09:58
rindolfhttp://packages.ubuntu.com/hardy/libc6-dbg - this is a broken link.09:58
rindolfBen64: ah.09:58
stianhjjony: then you need to install one09:59
jonystianhj, it's installed10:00
cuonghlhi all, I'm using Windows 7 and Ubuntu 12.04 together. I got the problem that GRUB2 couldn't detect Windows 7 :( How can I fix it?10:00
pagzhi all, trying to follow some info i found on google about how to disable the guest account via editing lightdm.conf but im getting errors 'unable to open display'10:00
stianhjjony: is there anything in the /usr/lib/jvm folder?10:01
Ben64pagz: let us know what you're doing and the exact error10:01
jonystianhj, I have there three folders: java-1.7.0-openjdk-i386, java-7-openjdk-common, java-7-openjdk-i38610:01
CVirusI'm trying to remount a device as read only but nothing happens .. It is still writable: mount -f -t ext4 -o remount,ro /dev/sdc4 /mnt/foo10:02
pagzfollowing this http://catlingmindswipe.blogspot.com.au/2012/10/how-to-disable-guest-account-on-ubuntu.html10:02
Jordan_UCVirus: What is the output of "cat /proc/mounts" and "touch /mnt/foo/test_file"?10:03
pagzwhile attemping to do 'gksu gedit /etc/lightdm/lightdm.conf' i get '(gksu:9249): Gtk-WARNING **: cannot open display:'10:03
Jordan_UCVirus: (Please use http://pastebin.ubuntu.com )10:03
MikeHI have a bit of a strange problem. My system seems to think that / is full. However doing a du -sh * doesn't show anything using any particularly large amount of space10:03
stianhjjony: http://askubuntu.com/questions/21561/how-to-install-jdk-and-netbeans10:03
Jordan_Upagz: Are you running that command from a tty?10:04
CVirusJordan_U, /dev/sdc4 /mnt/arakoon_object_9005 ext4 rw,noatime,user_xattr,barrier=1,stripe=32,data=ordered,discard 0 010:04
Jordan_UCVirus: Please pastebin the complete output.10:04
CVirusJordan_U, trying to touch a file there works10:04
pagzfrom tty and from the desktop10:04
Jordan_Upagz: What if you just run "gedit" from the same terminal?10:05
Jordan_Upagz: Does it give a similar error message, or does gedit open?10:06
jonystianhj, it doesnt help me that link10:06
Ben64MikeH: how big is / ?10:07
MikeHBen64: 910G10:07
Ben64MikeH: i take it you don't have a separate /home ?10:07
MikeHBen64: No - just /10:07
rindolfMikeH: that sucks.10:08
rindolfMikeH: a separate /home is a good idea.10:08
Ben64MikeH: well you must have filled up your drive... free up some space : /10:08
MikeHThis is the issue. du -sh / reports 5.2GB10:08
pagzJordan_U i found the problem.... i was logged in as guest... logged out as my account and i got the guest account disabled now...10:09
Jordan_Upagz: That's a little ironic :)10:09
pagzthanks for the help10:09
Jordan_Upagz: You're welcome.10:09
Ben64MikeH: pastebin "df -h" and "du -h --max-depth 1 /home"10:10
pagzyea... i was about to go crazy :p10:10
MikeHBen64: Little need to paste bin. /home is using 203M10:11
MikeHBen64: Relevant potion of df -h: /dev/sda1       910G  863G     0 100% /10:11
MikeHI've never seen anything like it.10:11
bardou-lWe choice a separate /Home during installation, isn't It ?10:12
MikeHI have no need for a separate /home - nothing of importance is stored there.10:12
=== yavor is now known as y4h0
Jordan_UMikeH: It could be that some app has been creating a lot of files (or one large file) then deleting it, but keeping the file open.10:13
bardou-lSorry, I didn't understand10:14
MikeHJordan_U: Actually - you're correct. I just noticed a lot of php processes. Killed them and the space is back.10:15
MikeHI think I know what the script is, but I can't see how that's happening10:16
huluwho can help me with the live-dvd10:30
huluwho can help me with the live-dvd10:30
=== adellam_ is now known as adellam
=== qos|away is now known as qos
=== lubuntu is now known as Guest22876
=== ce_ is now known as Craig_E
Costeelation fdgfg10:47
huluwho can help me with live-dvd10:47
Ben64hulu: it might help if you said something more substantial10:48
hului want to change /etc/skel/* ,but livecd create ubuntu user without /etc/skel/*10:49
huluwho can help me10:50
Ben64you want to change something that doesn't exist?10:50
huluBen64: yes10:50
Craig_EHulu: try rephrasing your question: whats your end goal - and we may be able to help..10:51
Craig_Eanswering "yes" to "so you want to change something that doesn't exist" isn't a good start '_10:51
Richiie_crap.. no one is answering in #ubuntu-touch10:52
huluCraig_E: i want to change /etc/skel/*,but livecd create user without /etc/skel/*10:52
k1lRichiie: you were not answering the question adressed to you :/10:53
javedhi guys10:53
llutzhulu: so you have to change /whatever/livecd/uses/* instead10:53
=== javed is now known as Javed
JavedHow are you all?10:54
hulullutz: where is the /whatever/livecd/uses/* in 13.0410:55
llutzhulu: idk else i would have used the correct path10:55
hulullutz: i don't know the correct path10:57
llutzhulu: so your real question is: where are the user-settings coming from (its not /etc/skel), when creating a new user using livecd?10:57
hulullutz: yes10:58
llutzwhy don't you ask it then?10:58
huluwhere are the user-settings coming from (its not /etc/skel), when creating a new user using livecd?10:59
chumuabout to install 13.04 but when attempting to partition drive there is not option to 200MB uefi drive, where is it11:00
huluwho can help me11:00
ezra-schumu, are you installing the 64bit version?11:01
samijamthere are many things that are faster in 13.04, but it still takes 10 seconds for the sound settings to open11:02
hulullutz: can you help me?11:03
samijamspeaking of sound settings, I always open it to turn the volume up to louder that 100%. Is there some way I can do this without opening the sound settings?11:03
samijamlouder *than* 100%11:04
PatrickDickeyhulu: This might give you an idea. Although it's intended for a different reason, the information might be useful. http://askubuntu.com/questions/128071/how-to-change-a-dconf-setting-for-customized-live-cd11:04
llutzhulu: as i told you before:i have no idea11:04
ezra-ssamijam, which sound card do you have? I never had such problem11:06
jonyhow can I set an automatic download if a new CircleMagazine appears?11:07
PatrickDickeysamijam: http://unix.stackexchange.com/questions/32206/set-volume-from-terminal might be a good start.11:08
PatrickDickeyjony: Are you talking about the Full Circle Magazine issues?11:08
brainwashsamijam: you can use the pulseaudio command-line toll "pactl" and create a new autostart launcher for it11:09
jonyPatrickDickey, yes11:09
samijamI'm wanting the volume slider in the statusbar area(which i use the mouse scroll to adjust) to turn it past 100%.  In the sound settings I can go to 150%11:09
PatrickDickeyjony: They used to have a script that you could run. it would check on a regular basis, and download the issue (and/or podcasts). If they're still using it, it's on their site or listed in the beginning of the magazine.11:10
jonyPatrickDickey, ty11:10
jonyby the way it's useful this magazine to improve skills in Linux?11:10
PatrickDickeyjony: no problem. hope it helps. If it's not in the current issue, check some of them from last year (around Issue # 32 or so) for the link.11:10
svipIs the libsdl1.2-dev package broken in precise?  As far as I can gather, it is a problem with libdrm2 being a different version than expected.11:11
gustavIs Ubuntu mainly for consuming media?11:11
svipI assume it is a dependency problem.11:11
PatrickDickeyjony: In some ways, yes. They have how-to articles, and a few series on different things like python, LibreOffice, and Blender.11:11
linux_unix-10why will Ubuntu  i386 not boot properly on dell inspiron?11:11
PatrickDickeylinux_unix-10: It could be a lot of reasons. Do you get any error messages, or does it even try to boot?11:12
ezra-slinux_unix-10, what do you mean by "not boot properly"?11:13
ezra-sis it a UEFI machine?11:13
frodefSomehow my ubuntu 12.04 desktop has decided there should be a global shortcut such that Alt-Backspace opens a terminal. This makes emacs unusable. I can't find this configured anywhere, it's not in the system settings/keyboard/shortcuts config.  How can I remove it?11:14
jribgustav: use ubuntu for whatever you want11:14
ezra-sgustav, I use ubuntu at home for gaming and internet browsing, at work for office stuff, in the living room as a media center with xbmc, many possibilities.11:15
jribfrodef: does it happen when you hit alt-backspace in gedit for example?11:16
* PatrickDickey uses Ubuntu or one of it's variations for almost everything I do at home. 11:16
papachanhow i can login to ubuntuone. i have reinstalled the certificate package11:17
ubottuXubuntu is Ubuntu with Xfce as the desktop environment. More info at http://www.xubuntu.org/ - To install from Ubuntu: « sudo apt-get install xubuntu-desktop » - Join #xubuntu for support - See also: !Ubuntu and !Xubuntu-Channels11:20
ezra-spapachan, which certificate are you talking about? there is an application with asks you for login and password for ubuntu one11:21
papachanezra-s yes i have run that app and deleted my certficate with name "ubuntu one"11:23
ezra-spapachan, and what's that certificate has to do with ubuntu one?11:24
=== anonymous is now known as Guest47120
papachanezra-s well how ican validate a session login through commandline? is there any debug to see which certificate ubuntuone is using actually?11:25
Stameniis there a separate channel for ubuntu-minimal ?11:29
dn4how do I find out if ubuntu installed the apple_system management controller11:29
=== chop1n[afk] is now known as chop1n
ezra-spapachan, assuming your ubuntu one sync daemon is started try "u1sdtool -c"11:29
papachanhmmmm ezra-s i dont have ulsdtool11:30
ezra-spapachan, u1sdtool not ulsdtool11:31
ezra-sif you have ubuntu one installed you will have u1sdtool11:31
ezra-spapachan, do a "dpkg -l | grep ubuntuone-client"11:32
ezra-ssee if it shows you have ubuntuone-client installed11:32
papachan"GET / HEAD requests should not include body"11:32
papachanthats the login message11:32
papachani cannot login through my ubuntuone login screen11:33
papachanrunning u1sdtool -c show the login screen11:33
gustavezra-s: So mostly media?11:33
ezra-sgustav, mostly anything11:33
sonofzeusHow shall I find httpd.conf?11:33
ezra-spapachan, sorry I can't help you11:34
papachanthank you11:34
papachanno problem11:34
gustavIs there any way to flush It has wrong data about my servers...11:34
=== chop1n is now known as chop1n[afk]
ezra-ssonofzeus, do a "apt-file list apache2.2-common | grep conf"11:36
=== derWachert|BNC is now known as derWachert
ezra-ssonofzeus, ubuntu uses apache2.conf instead it seems11:37
dn4how do I know if ubuntu installed the apple system management controllers ?11:37
papachani think the error is a documented  OAUTH error https://github.com/idan/oauthlib/blob/master/oauthlib/oauth1/rfc5849/__init__.py#L26811:37
AtuMmust say.. moving from F18 to 13.04 was a breeze.. but it's good to know how to setup a luks drive manually since the install process does not offer to use an existing one11:37
jonywhere I can find the JDK folder in Ubuntu it's needed for NetBeans install?11:39
ezra-sAtuM, there is no option for LUKS in the installer?11:39
ezra-sAtuM, previous versions had an option in the alternate install CD I recall, don't know about 13.04, will try in a few days11:40
llutzjony: did you install a jdk-package? then "readlink -f $(which javac)" should show you the path11:41
AtuMi didn't use alternate version install.. but i can say that it offers to make a luks partition.. i'm glad i didn't use that, since it would most likely reformat my data11:42
AtuMsome systems detect luks and offer to input the password to unlock.. too bad ubuntu doesn't do that already11:42
jonyllutz, yes, jdk 7 was installed from software center11:43
ezra-sAtum, I haven't seen a "alternate install" cd or iso for 13.04, I looked for it11:43
llutz"alternate-cd" was dropped with 12.10 afaik11:44
ezra-sahh, that explains it, thanks llutz11:44
AtuMezra-s, so have I.. perhaps it isn't ready yet.. the install itself goes really smooth and offers to manually partition your disks11:44
AtuMezra-s, so I don't see the need for alternate anyway11:45
talsamonhello , i've tried to configure a static ip - it not works on boot, resolv.conf is empty, if i pipe nameserver XX.XX:XX:XXX in the resolv.conf and startet it with ifup eth0 everythings work - what is to do to make it work on boot11:45
ezra-sAtuM, hope manual partitioning allows you to easily handle luks and lvm.. previous version was kind of a nightmare, specially if you had saved changes to disk and wanted to go back, there was no way in the graphical installer to remove the lvm physical volumes11:46
frodefjrib: Yes, it seems to be a global shortcut.11:46
=== Jikan is now known as Jikai
AtuMezra-s, i skipped luks since I already had one.. from what I can tell lvm is a breeze11:46
ezra-sAtuM, if as llutz  has said the alternate install has been dropped is because those options in the alternate version have been merged obviously11:46
ezra-slvm is good yes11:47
jribfrodef: the default shortcut for a terminal is ctrl-alt-t I think. Does that also work/11:47
llutztalsamon: edit /etc/network/interfaces , add a line "dns-nameservers" to your iface configuration11:48
jonyllutz, yes, jdk 7 was installed from software center11:49
talsamonllutz,  is in my interfaces11:49
llutztalsamon: does it also contain "auto eth0"?11:49
ActionParsnipjony: which java?11:49
alkisgNo gcompris in 13.04?! Btw, http://packages.ubuntu.com/raring/i386/gcompris/filelist exists, yet http://packages.ubuntu.com/raring/gcompris doesnt! Very strange, something went wrong with the archive there?11:49
ActionParsnipalkisg: check the change log11:50
alkisgActionParsnip: how can I check the changelog of a missing package?11:50
alkisgIs it online on some page?11:50
bazhang!info gcompris | alkisg11:50
ubottualkisg: gcompris (source: gcompris): Educational games for small children. In component universe, is optional. Version 12.01-1ubuntu1 (raring), package size 536 kB, installed size 1507 kB11:50
jonyActionParsnip, OpenJDK Java 7 Runtime11:50
talsamonllutz,  the resolv.conf is empry11:50
ActionParsnipalkisg: the old versions from the previous releases still exists11:50
ActionParsnipjony: so from a PPA11:50
ezra-salkisg, http://packages.ubuntu.com/11:51
jonyActionParsnip, yes11:51
llutztalsamon: pastebin your /etc/network/interfaces please11:51
llutz!paste | talsamon11:51
ubottutalsamon: For posting multi-line texts into the channel, please use http://paste.ubuntu.com | To post !screenshots use http://imagebin.org/?page=add | !pastebinit to paste directly from command line | Make sure you give us the URL for your paste - see also the channel topic.11:51
alkisgActionParsnip, ezra-s, it's not logical to see the filelist (http://packages.ubuntu.com/raring/i386/gcompris/filelist), then click on the package name on the web top menu, and get a "package does not exist" error... I'll search for a changelog11:52
ActionParsnipalkisg: https://launchpad.net/ubuntu/raring/+source/gcompris   seems to be there, its also in Saucy11:52
ActionParsnipalkisg: https://launchpad.net/ubuntu/raring/i386/gcompris11:52
ActionParsnipalkisg: not seeing any issues here....11:52
ActionParsnipjony: and what is the issue with java?11:52
alkisgActionParsnip: http://packages.ubuntu.com/search?keywords=gcompris => search for raring there11:52
talsamonllutz, http://paste.ubuntu.com/5618922/11:53
jonyActionParsnip, NetBeans installation asks for the JDK path, and I don't know which path to give him11:53
llutztalsamon: check spelling, dns-nameservers11:53
alkisgI don't see anything weird in the changelog... https://launchpad.net/ubuntu/raring/+source/gcompris/+changelog11:54
talsamonllutz oh thanks11:54
alkisgYet no binary packages11:54
ezra-stalsamon, network
ActionParsnipalkisg: https://launchpad.net/ubuntu/+source/gcompris/+changelog   states published in Raring, You could report a bug11:54
Sahebnickserb register password mithun.starlite@gmail.com11:54
alkisgActionParsnip: thank you11:54
ActionParsnipjony: what is the output of:   file `which java`11:54
ActionParsnipSaheb: time for a new password dude11:54
llutzjony: "runtime" is jre not jdk, you need to install the openjdk-7-jdk package11:54
=== Jikai is now known as Jikan
llutzand yes, openjdk is a confusing name11:55
=== zz_Karbowiak is now known as Karbowiak
lesslessguys I need VM to use IEtester, what can be the fastest solution?11:56
talsamonezra-s,  yes , thank - thats nosense ;-)11:56
ActionParsnipalkisg: https://launchpad.net/ubuntu/+source/gcompris/12.01-1ubuntu1/+build/3860256/+files/gcompris_12.01-1ubuntu1_i386.deb    https://launchpad.net/ubuntu/+source/gcompris/12.01-1ubuntu1/+build/3860256/+files/gcompris-data_12.01-1ubuntu1_all.deb11:56
ActionParsnipalkisg: bit cheeky :)11:56
ezra-stalsamon :o)11:57
talsamonllutz, ezra-s  ok thank you it's working11:58
ActionParsnipalkisg: may also need https://launchpad.net/ubuntu/+source/gcompris/12.01-1ubuntu1/+build/3860256/+files/gcompris-sound-en_12.01-1ubuntu1_all.deb11:58
alkisgActionParsnip: thanks again :)11:59
jonyllutz, ty, installing that package it worked12:01
=== tiffany is now known as Guest8490
=== qos is now known as qos|away
=== irenicus09 is now known as Guest46795
lolzhello peeps12:06
maheshrsn00b here, so wondering if this is the place to ask questions about xubuntu?12:11
Y05H10HEy guys, i'm having a problem with fstab and my Hard drives. Since i installed 12.10 there is a mount point for my HDD (/dev/mapper/pdc_cjdeaehcej) of which i don't know where it comes from. I used to have two 1TB drives mounted automatically by UUID in fstab. but now i can't define them anymore. One of them is mounted like i just wrote and one is just not accessable at all.12:11
maheshrsn00b here, so wondering if this is the place to ask questions about xubuntu?12:11
DJonesmaheshrs: Yes, you can ask here or in #xubuntu12:11
ezra-smaheshrs, don't ask to ask, just ask12:11
maheshrsthanks @djones. hey, i am trying to figure out how do i control what programs/daemons start on xubuntu and how can i switch some of them off12:12
maheshrsthanks ezra-s. now i know.12:12
maheshrsi mean, i understand that all the *ubu-s use the new way of starting daemons in place of the old "linear" init way of starting daemons12:13
maheshrsand that makes life tough12:13
ezra-smaheshrs, I am not an expert in the matter since I rarely need it but I bet some of the info you need you will find it in here: http://upstart.ubuntu.com/faq.html12:14
maheshrsyes! upstart! thanks ezra-s i will read through that manual to figure out if i can find something12:15
Y05H10After installing 12.10 i now have a mount point i have no idea where it comes from called /dev/mapper/pdc_cjdeaehcej it is not listed in fstab. How can i get rid of it?12:15
ezra-smaheshrs, ;)12:15
xuser1how cai i install ATI RV370 [Radeon X300/X550/X1050 Series] driver in ubuntu?12:16
Y05H10GUys? No idea?12:16
SwedeMikeY05H10: http://forums.fedoraforum.org/archive/index.php/t-172473.html12:16
ezra-sxuser1, in "software sources" for Additional drivers12:17
Y05H10Thanks SwedeMike, i read that too but the thing is that i don't even have a Raid, its just two normal 1TB Drives (Ntfs) i want to mount.12:17
maheshrs@y05h10, do you have raid enabled in your bios? or do you have raid drives? or do you have encrypted devices/drives?12:17
xuser1i cant find any driver in software sources12:18
Y05H10@maheshrs i do not have raid drives, they are not encrypted. ABout the bios thing. I don't know but it always worked before (also with 12.10)12:18
maheshrsdo you use lvm?12:18
ezra-sxuser1, then you will have to install the binary from AMD manually in the terminal, it is usually a download and execute outside of X12:19
maheshrs@y05h10, do you use lvm12:19
maheshrs@y05h10, well then, I have run out of options! ;-)12:19
Y05H10and my fstab doesn't list the two HDD's. There is just my / my /home and my swap in there.12:20
maheshrs@y05h10, fairly certain that you are using lvm12:20
maheshrs@y05h10, can you please post the output of lvdisplay, vgdisplay and pvdisplay12:21
Y05H10sudo: lvdisplay: Befehl nicht gefunden (command not found) (not installed)12:22
Y05H10same for the other two12:22
Y05H10i really don't use it12:22
Y05H10I just intalled 12.10 to my / partition today and kept my /home, during that these Two 1TB Drives were running in my COmputer and i think they were found by ubuntu as part of my setup12:23
Y05H10but i don't know why it created /dev/mapper/"........."12:24
Y05H10and that only for one of these drives12:24
maheshrsok! I am no expert on these matters, but, I will explain to the best of my abilities. i am sure the seniors on this forum will fill in the gaps12:25
maheshrsat the time of installation, ubuntu usually installs lvm (logical volume manager)12:26
jonyI installed openssh-server on a remote lubuntu PC, when I want to connect to it from my local terminal, it ask me a password, I type the remote pc's login password, but it tells me that's wrong, please help12:26
maheshrsi am sure you know what lvm is, but, just to be on the same page, lvm makes it easy manage hdds12:26
maheshrsit essentially makes all the hdds in your system appear as one "volume"12:27
=== qos|away is now known as qos
maheshrsso in a way, it puts together all the free storage space from across all physical drives into one "storage volume"12:27
maheshrscan you please run fdisk? and just look at the output12:29
maheshrsdoes it say "linux lvm" anywhere?12:29
ezra-snow that you mention it...12:30
Y05H10it doesnt12:30
ezra-sY05H10, are you using LUKS?12:30
jiwani can't create folder in Ubuntu 13.0412:30
jiwanwhy please help me?12:30
ezra-sjiwan, lack of permissions12:31
Y05H10No i don't, LUKS is the device encryption to clarify right?12:31
jiwanbut i give the permission12:31
maheshrs@jiwan, maybe your file system is mounted read only or you don't have permission to create a folder in that directory12:31
jiwanso what should i have to do12:31
jiwani tried sudo chmod u+rw /dev/sda6 too12:32
jiwanbut it doesn't work12:32
Y05H10so, sudo fdisk -l doesn't say anything about lvm12:32
ezra-sY05H10, luks works with lvm and that mapper weird volume name would explain you really are using lvm and luks ;P12:32
ezra-sY05H10, paste fdisk -l in the ubuntu paste bin and share the link here so we can see12:33
jonyif I connect locally to ssh (ssh localhost) I can login... from another PC it doesn't let me using the same password, WHY?12:33
ezra-spast fstab too if you can12:33
jribjony: you get a password prompt?12:33
ezra-sjony, wrong user?12:33
maheshrs@ezra-s that is what I suspect too. and i asked @y05h10 to check all those things, but, he doesn't have any of them enabled!!12:33
jonyyes, I got promt12:33
Y05H10I have no idea where all these /dev/mapper entry's come from ...12:35
jonyhow can I specify in terminal the ssh username too?12:35
ezra-sY05H10, have you checked the number and sizes?12:36
ezra-s/dev/mapper/pdc_cjdeaehcej1            2048  1953122303   976560128    7  HPFS/NTFS/exFAT12:36
Y05H10Not really no12:36
ezra-s/dev/sdb1            2048  1953122303   976560128    7  HPFS/NTFS/exFAT12:36
ezra-slook familiar, doesnt it?12:37
Y05H10Yeah, thats correct. 1TB12:37
Y05H10to /dev/sde112:37
maheshrs@y05h10, do you have a total of 5 disks in that machine?12:37
Y05H10well no12:38
maheshrswell! I am sorry! I was going to point out what @ezra-s has already found. :)12:38
Y05H101 Have 4, 1 SSD (split into / and /home) , 1 HDD 500GB (windows) 2x 1 HDD 1TB (Media and Media2)12:38
Y05H10so, 4 Disks and 5 Partitions12:38
ezra-sY05H10, open a terminal, type " lvmdiskscan"12:38
maheshrsand your windows partition is mounted right now?12:39
Y05H10yes, and that /dev/mapper/"..." is too12:39
ezra-salso do a "mount" and paste all results in a paste link12:39
jonyI want to connect to a remote desktop using VNC but I don't wanna to display anything the host's display, help please12:39
Y05H10Output : marius@Marius-PC:~$ lvmdiskscan Die Anwendung »lvmdiskscan« ist momentan nicht installiert. Sie können sie durch folgende Eingabe installieren: sudo apt-get install lvm2 marius@Marius-PC:~$12:39
Y05H10lvm 2 is not installed12:39
ezra-sI see12:39
compdocjony, you dont want to share the desktop?12:39
ezra-sdo a "mount" and paste please12:40
Y05H10mount http://paste.ubuntu.com/5619029/12:40
ActionParsnipY05H10: make sure you put your browser cache in tepfs, reduces writes to the SSD, as well as /var12:41
Y05H10Oh! I am so sorry! i actually have 5 disks12:41
ActionParsnipY05H10: sorry, /var on the platter based drive12:41
maheshrs@y05h10, I told you so! :D12:41
Y05H10Yeah, my External.. also 1TB12:41
Y05H10called Elements12:41
Y05H10How would i do so? ActionParsnip12:41
maheshrs@y05h10, can you just "cd /mnt/DC607A67607A4872" and see if the contents seem familiar?12:42
jonycompdoc, exactly12:42
maheshrs@y05h10, can i make an alternate suggestion?12:43
frodefjrib: No, I think I disabled that one in the systems settings.12:43
jonycompdoc, so I want to able to see the remote desktop, but I don't want to display my operations on the local display12:43
compdocjony, you need a vnc server service. like vnc4server or tightvnc. But I think x11rdp is better than vnc12:44
Y05H10yeah, thats my Media HDD it is mounted i know, but the mount point is that /dev/mapper/"..." and it doesn't used to be this. Also i can't access my other 1TB HDD (Media2)12:44
maheshrs@ezra-s, can I make an alternate and "very low tech" suggestion to "@y05h10?12:44
ezra-smaheshrs, hehhe I am no boss12:44
platzhirschHow can I check version number etc. of a package with apt-get?12:45
maheshrs@y05h10, here's my suggestion: start "unmounting all disks one by one"12:45
maheshrsand after unmounting (or safely removing drive, or ejecting, whatever ...) check the mount12:45
ezra-sunmount with one hand, cross fingers with the other :D12:45
Y05H10Hardware sided?12:45
jonycompdoc, ty, I will try the last one12:45
daleusWhy is a single disk appearing in the mapper folder? surely that's for fakeraid only (i.e nvidia chips etc)12:45
ezra-she means with umount command12:45
frodefjrib: I disabled the default Ctrl-Alt-T shortcut for terminal, that is. Sorry about the slow response.12:46
ezra-sY05H10, have you pasted the "mount" command already?12:46
Y05H10ages ago12:46
maheshrsyes! either unmount on the command line or just open the file browser and right click on each external "mount point" and choose "safely remove drive"12:46
compdocjony, you mean x11rdp? this works well:  http://scarygliders.net/2012/06/20/x11rdp-o-matic-and-rdpsesconfig-version-2/12:46
ezra-ssorry I am looking many other places12:47
Y05H10so, the only devices i see in nautilus are Windows (500GB), Elements (1TB External) and Media (1TB Internal) i am, however, missing Media212:47
maheshrsdarn! low batt for me12:47
Y05H10Thats ok ezra ;)12:47
ezra-sY05H10, check http://ubuntuforums.org/showthread.php?t=109684112:48
ezra-sit's a FUSE thing12:48
isaac_hi all; does anyone know if you still have to use 32bit flash with steam or they support 64bit flash?12:48
ezra-sdo not touch12:48
maheshrsalso, correct me if i am wrong, but, you should only have 4 mounts12:48
maheshrsbecause the 5th mount is on your /, /home, etc12:49
maheshrsso you are not going to see it separately, right?12:49
maheshrsas far as I understand it, you are good to go12:49
maheshrsyour system is up and running nicely with loads of disk space! :)12:49
Y05H10but i am still missing the 4th Mount..12:49
Y05H10I cannot access Media212:50
maheshrshuh! ... oh!12:50
Y05H10and the Mount point of Media (/dev/mapper/"...") was suspicious to me like hell12:50
ezra-sY05H10, check syslog see if there is an error when FUSE is trying to mount it12:50
maheshrsin the terminal "cd /mnt/DC607A67607A4872"12:51
maheshrsis that your external drive?12:51
lenimI be good.12:51
=== syncsys_ is now known as Quest
maheshrsdarn! even lower batt for me12:52
Y05H10syslog http://paste.ubuntu.com/5619061/12:52
lenimHey use some elbow grease12:52
jonycompdoc, ty for the link12:53
crackcan your use the new ubuntu?12:54
lenimWhen worked on my model-t i just needed bandaides and a shoelace.12:54
DJoneslenim: Please stay on topic, this is Ubuntu support, there are other channels for random chat12:54
mank319hey there :-)12:55
lenimcrack: head bob of course you can use the new ubuntu12:55
compdocjony, vnc stopped working with Unity in 12.11 and 13.04 without installing gnome-fallback. x11rdp uses gnome-fallback too, but I like it better than vnc now12:55
mank319are scripts saved at /etc/network/if-up.d/ excuted by root?12:55
mank319cause i am trying to mount a smb share there upon network connection12:55
sheerunGuys, could you help? SUID is not working for me: http://pastie.org/774265612:55
mank319when i run taht script manually with sudo it works12:55
mank319but it does not appear to get executed12:56
Y05H10can't i just reconfigure fuse to forget these devices or something? so that i can go and define them myself like before in fstab?12:56
snugglmank319: put auto mounts in fstab12:56
mank319well that does not work12:56
mank319i cannot specify a delay there12:56
mank319i have a homserver which gets shut up and down12:56
mank319when i connect to the network a magicpacket gets sent to wake the server. then it will take like 5-10 seconds until its read12:56
mank319i have written a nice script which listens for the server to be ready and everything12:57
maheshrs@y05h10, my batt is very low so i am jumping off for now. but it does appear that your external disk is NOT mounted right now.12:57
mank319i just need it to be executed with root permisison upon network.up12:57
maheshrsjust reboot the system and check, plz12:57
Y05H10But it is, anyway thank you ;)12:57
Y05H10I rebooted a few times12:57
maheshrsbye for now!12:57
maheshrsand all the best.12:57
mank319so does anyone know with which priviliges scripts in if-up.d get executed?12:58
Y05H10You too, thanks a lot12:58
mank319i assumed it would be root, cause its "kind of  a system thing"12:58
mank319so does anyone know with which priviliges scripts in if-up.d get executed?13:00
soundtroubleHi, i have a quastion about the order of my sound cards in ALSA. currently the on-board realtek is first and the video card's HDMI is second13:00
soundtroubleboth have snd-hda-intel as driver13:01
soundtroublei want to swap their order13:01
ezra-ssoundtrouble, swap the order? in ubuntu all you have to do is select the device you want to use in "sound settings"13:03
soundtroubleezra-s: I know, that's working for most stuff, but apparently some things bypass this...13:04
ezra-ssoundtrouble, maybe you want to blacklist the device in modprobe.d13:05
AmnuriakTrying to get my graphics drivers working properly again (e.g. have second monitor detected). Details are recorded here: http://askubuntu.com/questions/285354/graphics-driver-for-ati-firepro-2770-not-working-properly-on-12-0413:05
soundtroubleezra-z: I have just googled around some more and found the card-id might be used in specifying the order13:06
ezra-ssoundtrouble, although as you say if they use the same module maybe it is a matter of an option when loading the module, but, you will have to google it hard for that I bet13:06
ezra-ssoundtrouble, oh, nice, thx for sharing13:06
soundtroublelike this: options snd-hda-intel id=HDMI index=0  \\ options snd-hda-intel id=SB index=113:06
ezra-sthat's cool13:07
soundtroubleI'll have to chek if that's working though...13:07
ActionParsnipAmnuriak: have you tried the fglrx legacy ppa13:07
jonycompdoc, the remote PC runs Lubuntu 12.0413:07
ezra-ssoundtrouble, where are you supposed to place those options?13:07
adamk_Amnuriak: Pastebin the full /var/log/Xorg.0.log file.13:09
soundtroubleezra-s: I believe in /etc/modprobe.d/alsa-base.conf13:10
ezra-syep, there are options like that at the bottom of that file, nice and easy :)13:11
ezra-sfaster thing will be to reboot to check13:11
trent_pci system error (serr) for reason a1 on cpu 0 dazed and confused but trying to continue ?13:12
julianoalgum ?13:12
trent_[    0.534958] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [    0.534975] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [    0.535057] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 17aa ss_did 2011 [    0.535082] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded [    0.535096] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 17aa ss_did 2011 [    0.535117] pciehp 000013:12
Amnuriakadamk_: http://pastebin.com/QBeJrBbQ13:13
soundtroubleezra-s: rebooting in a few secs...13:13
AmnuriakActionParsnip: No I haven't, didn't know about those. Trying to find something about them and try them out. thanks13:14
soundtroubleezra-s: working13:16
adamk_Amnuriak: The legacy driver should not be necessary as that video card has a Cedar GPU.13:16
adamk_Amnuriak: Pastebin the output of 'dmesg'13:16
Amnuriakadamk_: http://pastebin.com/v1ew8m2v13:17
designbybeckI have an external drive I'm try to format and use for backup. After a number of attempts quick formating and full formating, deleting partitions and adding new ones. It still gives me an error and says it is read-only. how do I fix this!?13:19
ActionParsnipAmnuriak: if its a 2xxx 3xxx or 4xxx Radeon GPU, you'll need that PPA13:19
trent_pci system error (serr) for reason a1 on cpu 0  http://paste.ubuntu.com/5619133/plain/13:19
adamk_Amnuriak: There is something odd going on here... Xorg is loading the fglrx_drv driver, but it's not using it and instead loads and uses fbdev.13:20
=== Kvasir is now known as erraneous
ezra-sdesignbybeck, are you using root to format?13:20
Amnuriakadamk_: yep, that's what I don't understand13:20
adamk_ActionParsnip: It uses a Cedar GPU, the same core that's in most HD5xxx GPUs.13:20
adamk_I'm wondering if, as a FireGL card, it requires a special driver, despite using the same core as the HD5xxx GPU.13:20
designbybeckezra-s: hmmm....not sure? when I opened Disks or GParted it asks for password13:20
Amnuriakadamk_: I was wondering if "fglrx: No matching Device section for instance (BusID PCI:0@1:0:0) found " was the real hint to the error and the reason why the drivers would not load13:21
adamk_Amnuriak: Do you have an /etc/X11/xorg.conf file?  If so, can you pastebin it.  Also, please pastebin the output of 'lspci'13:21
ActionParsnipadamk_: I see13:21
ezra-sdesignbybeck, maybe the disk you are trying to format, etc is being used13:22
designbybeckit did delete the 2 partitions on there and formated fine, It shows 500gb free13:22
Amnuriakadamk_: lspci -> http://pastebin.com/PVnCvEir13:23
usr13designbybeck: mount  #See if the drive you are working on is mounted.13:23
designbybeckyes usr, I dod see it as /dev/sdb113:24
Amnuriakadamk_: xorg.conf -> http://pastebin.com/frLXLagJ13:24
designbybeckdo see it13:24
=== brian_ is now known as brian___
=== brian___ is now known as brian____
erraneousWhat's with all the underscores?13:25
brian____was trying to find a name not registered with nickserv13:25
ezra-show unimaginative :P13:25
usr13designbybeck: You'll need to un mount it.13:26
adamk_Amnuriak: Check the files under /usr/share/X11/xorg.conf.d/ too... The default settings definitely aren't being used since AIGLX is getting disabled. I can only guess what other changes might have been made to those files.13:26
designbybeckusr13:  i'll have to unmount it before I can copy files to it?13:26
trent__  A little help..... pci system error (serr) for reason a1 on cpu 0  http://paste.ubuntu.com/5619133/plain/13:27
adamk_Amnuriak: Once you get those config files set back to their defaults, try generating a new xorg.conf file with 'aticonfig --initial'13:27
usr13designbybeck: Oh, I thought you were formatting or changing partitions.  I'm sorry.13:27
designbybeckusr13: yeah I think all that went smoothly. But now if I try to copy anything to it, it says it is read-only13:27
brian____ezra-s, ha yeah, 15 years ago, I was much more creative with my name13:27
usr13designbybeck:  What kind of device is it?13:28
designbybecka LACIE 500GB external HDD13:28
Amnuriakadamk_: There are 8 files in /usr/share/X11/xorg.conf.d/ but I really do not know what to do with them (syntactically they look like the xorg.conf) and I doubt you want me to pastebin them all13:29
usr13designbybeck: Show is the line for it from the output of   mount13:29
designbybeck/dev/sdb1 on /media/beck/Backup type vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)13:29
usr13designbybeck: It's mounted rw so, not sure what the problem is.13:30
adamk_Amnuriak: Well I am guessing that at least one of them may be contributing to this problem, so if you don't know what you're looking for/at then, yes, pastebin them.13:30
designbybeckusr13: hmmm.. it is one of those drives that uses two usb ports to plugin for power13:30
Amnuriakadamk_: ok, will do one at a time. this will take some time13:31
usr13designbybeck: Do you have a line in /etc/fstab file? If so, pastebinit /etc/fstab  #And send URL13:31
usr13designbybeck: Or show us the line.13:31
ezra-sdesignbybeck, usr13 problem is that it is mounted!13:31
brian____Ok, for the life of me, I can't get this stupid rtl8192cu usb network dongle to work.  I am getting a invalid argument when I start wlan0 which starts wpa_supplament?  It appears to go, becuase I see authentication attempts in the syslog.  Does anyone know if the rtl8192cu is going to work with the comp drivers or do I need to download the realtek ones?  I've googled so much, not sure what I believe...13:32
Amnuriakadamk_: 10-evdev.conf -> http://pastebin.com/rALnbnGD    (filename -> pastebin location)13:32
user0Hi can someone help with this please ? sources.list/dpkg fail -> http://pastebin.com/5FkuzrAr13:32
designbybeckusr13: ezra-s http://www.pasteall.org/4183913:32
usr13ezra-s: What is he trying to do to it?13:32
designbybeckezra-s:  I have it formated, I need it mounted to copy files to13:32
adamk_Amnuriak: Just combine them into one file...  Or one pastebin.13:32
designbybeckIt says read-only13:32
Amnuriakadamk_: ok13:32
ezra-sdesignbybeck, sorry I thought you were still trying to partition and format13:32
designbybeckezra-s:  no I think that did go ok, because it shows the new label and 500gb free. It just will not let me copy anything to it because it says read-only13:33
syncsys_I need a biomatrix (finger / thumb impression) tool on which employees put thumbs and the time and their id no. name etc comes on screen and is also feeded for HR and their pay calculation purposes. My question is that what model / make should I buy that also supports Linux OS and can be operated by open source softwares. 2. are there any open source softwares that do it (for linux and windows) ?13:34
ezra-suser0, change software sources to main server or a mirror which works13:34
usr13designbybeck: sdb1 is the one you are trying to write files to, right?13:34
designbybeckcorrect usr1313:35
designbybeckusr13:  that is the one I labeled my "Backup" drive13:35
jamie_How do I restore lxpanel?13:35
trent__HALP pci system error (serr) for reason a1 on cpu 0  http://paste.ubuntu.com/5619133/plain/13:35
usr13designbybeck: sudo blkid |pastebinit   #Or just show us the line for sdb113:36
ezra-sdesignbybeck, also paste the output of "mount"13:36
=== syncsys_ is now known as Quest
designbybeckusr13:  /dev/sdb1: LABEL="Backup" UUID="FD5E-C513" TYPE="vfat"13:36
designbybeckezra-s:/dev/sdb1 on /media/beck/Backup type vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)13:37
Amnuriakadamk_: http://pastebin.com/DJUmCiyh    check the very last file listed there. Is that "Off" the bad guy ?13:37
ezra-sdesignbybeck, I assumed you have tried writing with root right?13:37
designbybeckno i have not ezra-s, I was just trying to copy over my home folder to backup so I cna do a clean install of 13.0413:38
jamie_Which channel do i need to get help with lubuntu?13:38
=== maxx is now known as Guest12725
jhirleyhello, I am getting the connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"? error under ubuntu server.  any guidance on where to look ,  I can see postgres in ps but not in netstat ?  TIA ..13:38
ezra-spermissions there are 700 If I am not correct and the uid given is 1000 and 1000 for gid... so all inside is 70013:38
ezra-syou better use the correct user or try as root13:39
adamk_Amnuriak: Well disabling AIGLX won't cause fglrx to not work, but it's still not normal.  I'm also very confused as to why you are loading the pvr driver when you're not using a PowerVR GPU.13:39
designbybeckif I do it as root ezra-s, can I still access it on other machines and/or this one when I need to copy the files back over?13:39
designbybeckwould it be something like this sudo cp /home/username/*13:40
Amnuriakadamk_: I can't remember fiddling around with anything graphics related, not by hand at least (only via the system settings drivers/display)13:40
ezra-sdesignbybeck, it is for testing13:41
trent__where is my friend bean?13:41
ezra-sdesignbybeck, if root can't noone can13:41
ezra-sdesignbybeck, go to the disk with cd13:41
ezra-sand do "touch test"13:41
adamk_Amnuriak: Well something you did caused that change, since that's certainly not the default :-)  Remove that entire file.13:41
ezra-sto see if root can create that file in it13:41
ezra-sif root can you probably have a permissions problem13:41
Amnuriakadamk_: I suppose that takes a reboot to kick in ?13:41
ezra-schancking the umask might do then13:41
adamk_Amnuriak: Then try creating an xorg.conf file with 'aticonfig --initial'13:41
adamk_Amnuriak: No, it doesn't.13:42
designbybeckezra-s: touch test returned no results13:42
=== Onixs_ is now known as Onixs
designbybecki went to /media/username/Backup13:42
Amnuriaksudo aticonfig --initial ->  "Uninitialised file found, configuring. Using /etc/X11/xorg.conf"13:43
Amnuriakadamk_: sudo aticonfig --initial ->  "Uninitialised file found, configuring. Using /etc/X11/xorg.conf" (sorry, forgot name tag)13:43
trent__anybody?  pci system error (serr) for reason a1 on cpu 0  http://paste.ubuntu.com/5619133/plain/13:43
ezra-sdesignbybeck, you should have a test file whereever your ran that13:44
ezra-stouch creates empty file, it's good to test if you can write13:44
designbybeckoh yeah I do13:44
designbybecki did an ls and I can see a file now ezra-s13:44
ezra-sdesignbybeck, with root?13:44
designbybeckand I can see it in the file browser as well13:44
designbybeckno that wasn't root13:44
ezra-sthen you can write ;)13:45
designbybeckit let me delete it from the gui as well13:45
designbybeckas my main user13:45
adamk_Amnuriak: That's fine.13:45
ezra-sdesignbybeck, I bet the user you used for touch was the one with id 100013:45
ezra-suse the same user to create files, etc..13:45
designbybeckdang, but when i try to make a new directory on that drive it still says read-only13:45
Amnuriakadamk_: I really am a novice when it comes to X11 but I thought having it adapt to new configurations requires it to restart, meaning rebooting ubuntu since I'm running only graphical desktop version13:46
ezra-sdesignbybeck, simple, check that /media/username/Backup has write permissions for your user13:46
adamk_Amnuriak: It only requires a restart if there is some change in the kernel driver being used.13:47
ubuwhat cli command will show me how many ram sticks I am using? i looked at /proc/meminfo and it doesn't show individual sticks or slots13:47
designbybeckezra-s: http://www.pasteall.org/pic/show.php?id=5037813:47
Amnuriakadamk_: isn't that the actual goal ? make it use the fglrx ? sorry for being blut, I'm pretty confused by now. By the way, there were no obvious changes after the call to aticonfig (meaning same problems with monitors)13:48
ubufound it, it's sudo dmidecode --type 17 IF anyone is curious13:49
ubottuciccios: No warez here! This is not a file sharing channel (or network); read the channel topic. If you're looking for information about me, type « /msg ubottu !bot ». If you're looking for a channel, see « /msg ubottu !alis ».13:49
ubuwhats with people coming in here and thinking theres warez here?13:50
ezra-sdesignbybeck, never trust graphical interface, go to terminal and check permissions yourself, if you can create a file I see no reason why you can't create a dir unless you are using different users13:50
betraydubu: maybe they're looking for people who know where some can be found13:50
designbybeckhwo do I check prems on that drive ezra-s?13:50
designbybeckan ls -l just returns totls 0 ezra-s13:51
ububetrayd, no, they're coming in and running a command. see the recent ciccios person13:51
trent__any help pci system error (serr) for reason a1 on cpu 0  http://paste.ubuntu.com/5619133/plain/13:51
=== sddhrthr1 is now known as sddhrt
ubudesignbybeck, ls -la13:51
usr13designbybeck: We see -Read  -Write -Execute   should be  +Read  +Write +Execute  (File Permissions)13:52
designbybeckthanks ubu13:52
designbybeckusr13: ezra-s ubu : total 2013:52
designbybeckdrwx------  2 beck beck 16384 Apr 30 08:45 .13:52
designbybeckdrwxr-x---+ 3 root root  4096 Apr 30 08:15 ..13:52
adamk_Amnuriak: Pastebin the new /var/log/Xorg.0.log file.  The problem you are having is getting Xorg to use the fglrx driver, not getting the kernel to load the fglrx driver.13:52
ubudesignbybeck, looks like only the folders owner has write permissions, the group permissions are read/execute. and "others" have NO permissions at all13:53
designbybeckhmmm how do we solve this ubu?13:53
ubutrent_, trying to access your pastebin link, it's asking me to log into launchpad. do you haev another pastebin link?13:53
Amnuriakadaml_: http://pastebin.com/CXbeAdUR13:53
trent__ill make one13:54
ubudesignbybeck, well, ezra-s was helping you, don't want to jump in mid way through13:54
designbybecki need all the help I can get ;)13:54
designbybeckJust trying to back up my system so I can do a clean install of 13.04 on it13:54
ubudesignbybeck, what's the end goal?13:54
designbybeckubu: ^13:55
bobshimay I ask a question13:55
ubudesignbybeck, any reason you specifically want to upgrade to 13.04?13:55
ubudesignbybeck, i meant, why are you curious about permissions. what's the end goal for that folder? permissions/owner/group wise13:56
ububobshi, just ask it13:56
usr13 designbybeck What are you on now? 12.04?13:56
designbybeckI've always upgraded to the lastest ubu, I try to learn it so I can stay ahead of the curve when other people ask, I can show them new things13:56
k2guys, i have a internet connection problem13:56
designbybeckI'm on 12.10 right now usr1313:56
bobshiI installed ubuntu 13.04,but the terminal bell not work13:56
usr13designbybeck: What command did you use to mount the drive?13:56
ubudesignbybeck, me personally stick with the LTS releases, way more stable13:57
k2very old -> internet connection problem13:57
designbybeckusr13:  I just plug it in13:57
=== Odysimus_away is now known as Odysimus
usr13designbybeck: How many users on this system?13:58
ubutrent_, i can see the dmesg output BUT what is the problem?13:58
ActionParsnip!ppoe | k213:58
ubottuSetting up an ADSL/PPPoE connection? Look at https://help.ubuntu.com/community/ADSLPPPoE13:58
trent__pci system error (serr) for reason a1 on cpu 0  dazed and confused but trying to continue13:58
lenimUbuntus that end in .04 are better than .10 versions13:58
k2yes ActionParsnip13:58
adamk_Amnuriak: Did you restart X after removing that file and creating the xorg.conf file?13:58
ActionParsniplenim: not always13:58
designbybeckjust me usr1313:58
ActionParsniplenim: although the LTS ones will always end in .04, but not all .04 releases are LTS13:59
bobshihow can i enable ternimal bell?13:59
lenimActionParsnip: seems that way13:59
trent__not sure what inm doing wrong with paste bin thet seem to work for me14:00
usr13designbybeck: sudo chmod 777 /media/beck/Backup14:00
ubutrent_, i understand that BUT sometimes those are just warnings or messages and don't cause anything to be actually wrong.14:00
Amnuriakadamk_: i just did (via alt+print+k). guess now you would need the log file ?14:00
k2i have tabulated all my problem here http://askubuntu.com/questions/288504/pppoe-connection-problem-nothing-works14:00
trent__i mean it does boot but its just worry some14:01
ubutrent_, i am saying, is there some behavior on your system that is alarming? does your system work ok?14:01
k2please have a look http://askubuntu.com/questions/288504/pppoe-connection-problem-nothing-works14:01
trent__never had this message with mint or fedora14:01
k2i cant tell everything in a line14:01
Amnuriakadamk_: a, something changed: I can now disable the "mirror displays" in system-settings->display but I cannot apply the change as hitting the "Apply" button shows up error messages (pastebin with the messages coming up)14:02
k2ActionParsnip ; for u , plz hav a look http://askubuntu.com/questions/288504/pppoe-connection-problem-nothing-works14:03
thesilence84Hey all, anyone up for looking at a suspend issue?14:03
Amnuriakadamk_: on hitting apply there are actually 2 error messages, one after another: http://pastebin.com/A95bH9aM14:04
designbybeckusr13:  that didn't seem to change anything14:04
designbybeckusr13: http://www.pasteall.org/4184014:04
Amnuriakadamk_: my /var/log/Xorg.0.log now: http://pastebin.com/XuWFyyxt14:05
Amnuriakadamk_: and my /var/log/Xog.1.log now: http://pastebin.com/4st7madN14:06
jeanbaptisteUbuntu, unity and firefox are best imo but they all need speeding up. Its too slow14:06
k2hello folks plz abswer if anybody knows http://askubuntu.com/questions/288504/pppoe-connection-problem-nothing-works14:06
ubudesignbybeck, what filesystem is your external media device? NTFS?14:07
designbybecknot sure ubu14:07
designbybecki think it might have been NTFS14:07
designbybecki was guessing I might hook to a windows system at sometime14:07
adamk_Amnuriak: Pastebin your /etc/X11/xorg.conf file.  All we should need to do now, I think, is add a Virtual line.14:07
designbybeckbut at this point I don't care I just wanted to backup and restore14:08
thesilence84k2 do a pastebin of your ppp.conf file14:08
k2coming in a minute, because im on dual boot14:08
juan_144Hi, my video card seems not supported on Lubuntu 13.04 HP compaq d53014:08
Amnuriakadamk_: http://pastebin.com/Ydr7k9NC14:08
ubutrent_, i googled that error and it appears to be related to something that probably is irrelevant. read this: http://ryagatich.blogspot.com/14:09
SuperLagI have a VM that is in a reboot loop, and I'd like to record a video of it happening... what package/app would I use for that?14:10
ubudesignbybeck, IF it's NTFS you can't change the permissions14:10
designbybeckwell that isn't cool ubu, Let me do another format on it14:10
ubudesignbybeck, is the external drive empty?14:10
ActionParsnipjuan_144: what video chip?14:11
designbybeckand set it to ext4 ubu ?14:11
designbybeckyes ubu14:11
ubuSuperLag, i have a lot of success with Kazam screencaster14:11
adamk_Amnuriak: http://pastebin.com/SYcNTBYa  Notice that the only difference is line 36.  We're essentially telling Xorg how much memory to reserve for the maximum framebuffer resolution.14:11
designbybeckAgreed Kazam is a great screencaster for Ubuntu14:12
SuperLagubu: is that something in the repos? or 3rd-partu?14:12
ubudesignbybeck, it's really dependent on what systems you'll hook it up to.14:12
designbybeckright now just Linux, I'll worry about the rest down the road14:12
ubudesignbybeck, if you want to access from windows and you know you won't have files larger then 4GB in size, you could go with FAT3214:12
ubuSuperLag, i don't recall, just check the standard ubuntu repo's first14:12
SuperLagubu: found it. Thanks man.14:12
SuperLagubu: it was in the repos14:12
betraydbut the reboot loop is the main problem eh14:13
ubudesignbybeck, picking the filesystem, you need to choose the right 1 for now AND the future since you won't be able to reformat it without losing the data on it.14:13
ActionParsnipubu: unless a backup exists (and it should)14:13
designbybeckthat is ok ubu because all I need for now is to backup, install and restore.... then I can do something else with this external harddrive14:14
ubuActionParsnip, well of course14:14
=== sean__ is now known as seann
designbybecki did a quick format as ext4, but it still says read-only14:14
ubudesignbybeck, what are you backing up specifically that you'll restore once you install 13.04?14:14
gyre008guy Im trying to create a USB boot drive14:14
ActionParsnipgyre008: try unetbootin14:14
gyre008however...when I start startup disk createor it doesnt detec the USB rive at all14:15
ubudesignbybeck, did you unmount it, format it using gparted to ext4, then plug it back in?14:15
designbybeckubu:  beck@beck-citr:/media/beck/Backup$ ls -al14:15
designbybecktotal 2414:15
designbybeckdrwx------  3 beck beck  4096 Apr 30 09:12 .14:15
designbybeckdrwxr-x---+ 3 root root  4096 Apr 30 09:13 ..14:15
designbybeckdrwx------  2 root root 16384 Apr 30 09:12 lost+found14:15
FloodBot1designbybeck: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.14:15
ActionParsnipgyre008: what OS are you making the device in?14:15
QuestI need a biomatrix (finger / thumb impression) tool on which employees put thumbs and the time and their id no. name etc comes on screen and is also feeded for HR and their pay calculation purposes. My question is that what model / make should I buy that also supports Linux OS and can be operated by open source softwares. 2. are there any open source softwares that do it (for linux and windows) ?14:15
usr13designbybeck: I just now realized that Backup is a directory on the HD  The mount point is /media/beck/   I suppose you could have just created another directory.  mkdir /media/beck/Backup214:15
gyre008there is a ext4 partition on the USB drive created14:15
designbybeckhmmmm usr1314:16
gyre008I can mount it just fine and create files on it when mounted14:16
gyre008however startup disk creator is simply not detecting it...14:16
gyre008no idea why14:16
usr13designbybeck: Never mind, I guess I'm wrong about that too.14:16
gyre008when I plug it into the the pc it's automatically mounted...14:17
designbybeckeven as ext4 I can't do anything with this drive14:17
usr13designbybeck: Does this drive have any external type hardware switches on it?14:17
gyre008df -h14:17
designbybeckubu: , I did unplug it and plugged it back in. It does have a lost+found dir now14:17
designbybeckbut if I try to create a dir it says read-only14:17
BluesKajHi all14:17
llldinoHey guys, i'm having trouble booting 13.04 off grub, it hangs right after I select ubuntu anyone have advice?14:17
designbybeckHello BluesKaj14:17
gyre008damn..now its detected but make startup disk button is inactive...man this is weird...14:18
ubudesignbybeck, what does the command "mount" return for the external media drive?14:18
BluesKajhi designbybeck14:18
designbybeckbeck@beck-citr:/media/beck/Backup$ ls -al14:18
designbybecktotal 2414:18
designbybeckdrwx------  3 beck beck  4096 Apr 30 09:12 .14:18
designbybeckdrwxr-x---+ 3 root root  4096 Apr 30 09:13 ..14:18
designbybeckdrwx------  2 root root 16384 Apr 30 09:12 lost+found14:18
FloodBot1designbybeck: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.14:18
designbybecksorry flood14:18
Amnuriakadamk_: the display section is working again. very nice, thank you !14:18
designbybeckubu: /dev/sdb1 on /media/beck/Backup type ext4 (rw,nosuid,nodev,uhelper=udisks2)14:18
SuperLagubu: that works great. Thank you for the recommendation.14:19
ubugyre008, i had issues with startup disk creator also. trying to install xubuntu 13.04 onto a 4GB usb stick the create was greyed out and it stated that my 4GB usb stick wasn't large enough14:19
Amnuriakadamk_: though I still cannot attach windows to the borders (any longer) but that is only a small annoyance compared to the dual screen issue14:19
llldinogyre008, There was a guy in here yesterday complaining of the same issue, if that makes you feel any better14:19
ubuSuperLag, no problem14:19
ubudesignbybeck, it shows it's read/write14:19
gyre008haha yeah it dies llldino14:19
Amnuriakadamk_: were you also able to see what might have caused the issue ? (So I'm better prepared for the next time)14:20
designbybeckubu:  but why it no read/write14:20
k2k2 is back14:20
ubudesignbybeck, ok, please unmount the media device for me14:20
ActionParsnipllldino: what GPU do you use?14:20
designbybeckcan I do that in gui, just eject it?14:21
designbybeckubu: ^14:21
ubudesignbybeck, i want to start from scratch. unmount it and I want to check something14:21
ubudesignbybeck, yes, click safely remove or eject14:21
designbybeckok ubu I think it is unmounted14:22
ActionParsnipdesignbybeck: you can check by running:  mount14:22
designbybeckubu:  confirmed "mount" does not show it14:22
ubudesignbybeck, does the command mount return anything related to /dev/sdb1?14:22
designbybeckI'm slowly learnin' ActionParsnip ;)14:22
designbybeckno it does not ubu14:22
ubudesignbybeck, ok, now pastebin the output of ls -la /media/14:22
ActionParsnipdesignbybeck: or just run:  cd $HOME; sudo umount /dev/sdb1; sdo eject /dev/sdb14:22
ActionParsnipdesignbybeck: simples :)14:23
lmatI installed openjdk-7-jdk  and now java -version returns version 6, and javac -version returns version 7.14:23
gyre008so the question is...is it even possible without some kind of dark voodoo ubuntu magic ?14:23
llldinoActionParsnip, NVIDA Gforce 9400m14:23
designbybeckubu: http://www.pasteall.org/4184114:23
lmatIt looks like ubuntu comes with java v1.6 by default, and when I installed jdk7, it didn't overwrite the java 6, but added javac 7. I would like everything to be on 1.7, what should I do?14:24
lmatI tried openjdk-7-jre but it's already installed (as a dependency of jdk.)14:24
ubudesignbybeck, ok, do you use the beck folder within /media/?14:24
designbybecki believe so ubu14:24
designbybeckthat is where the Backup was14:24
skaIs it safe to remove dnsmasq service for a statically connected box?14:24
usr13designbybeck: sudo chmod 777 /media/beck  ?14:25
ubudesignbybeck, what does ls -la /media/beck/ return?14:25
vicente_DICLdepends of what you have mounted in beck14:25
designbybeckubu: http://www.pasteall.org/4184214:26
designbybecknohting mounted at the moment vicente_DICL, we are trying to figure out why this external will not let me copy things to it, it only shows read-only14:26
vicente_DICL. means the current folder and .. the upper or previous folder14:26
k2hey! there is no ppp.conf file14:27
ubudesignbybeck, ok, since the beck folder is empty let's delete it. you are positive that the beck folder is empty correct? and nothing is mounted to that folder per mount14:27
vicente_DICLactually /media is for partitions mounted. of external devices such as CDROM14:27
k2guys my problem here>>>http://askubuntu.com/questions/288504/why-doesnt-my-pppoe-connection-connect-to-the-internet14:28
lmatI think I got it...I removed any openjdk-6 stuff I could. I hope this didn't break anything ^_^14:28
k2cant explain here14:28
designbybeckyes ubu14:28
gyre008managed to get to Installing bootloader stage....now this is being installed like 10 minutes so far...and it doesnt seem to be finishing...this stuff is well broken...darn :)14:28
adamk_Amnuriak: The real problem was that Xorg was configured to load the pvr driver.14:28
ubudesignbybeck, ok, so you deleted the beck folder within /media/?14:28
adamk_Amnuriak: This caused the fglrx driver to get disabled and dropped Xorg back to the fbdev driver.14:29
designbybeckubu ok It will not let me delete it as me14:29
ubuk2, yes14:29
designbybeckubu:  so sudo rm /media/beck ?14:29
k2can you get here http://askubuntu.com/questions/288504/why-doesnt-my-pppoe-connection-connect-to-the-internet14:29
adamk_Amnuriak: I don't know what you did to configure Xorg to load the pvr driver, but you definitely did something :-)14:29
ubudesignbybeck, as long as the folder beck contains nothing and you're positive, then yes, run sudo rm -rf /media/beck14:29
k2its something unusual14:30
designbybeckok ubu that is gone14:30
Amnuriakadamk_: hmpf :-/ ok, well this way I know where to look the next time. Thanks a lot ! (is there any kind of karma here?)14:30
ubudesignbybeck, be very CAREFUL with rm -rf!!!!14:30
designbybeckubu:  warning noted14:30
ubottuDO NOT RUN THAT COMMAND! That particular command is DANGEROUS and shouldn't be uttered here. REST OF YOU: DANGER, WILL ROBINSON, DANGER! Do not use the command or utter it here thank you!14:30
mmonatim all set nebber mind14:30
k2who is ubottu14:30
designbybeckwarning noted cfhowlett14:30
ubudesignbybeck, ok, pastebin me ls -la /media/ 1 more time14:30
k2is it a bot14:30
ubuk2, yes, a bot helper14:31
designbybeckubu:  http://www.pasteall.org/4184314:31
k2guys ,PPPoE problem14:31
xevilanyone having problems getting the live DVD of 13.04 to run?  It get to the point of loading Xorg and freezes on my box...14:31
ubudesignbybeck, ok, now plug in your external device14:31
designbybeckk2 quick bot to help users post FAQ and terms quickly14:31
samg__hi guys14:31
samg__Hi guys i wanted to know whats better for me... the only thing i do is here... listen to music (sync to my ipod) play grand theft auto san andreas and surf the web using google chrome... i installed ubuntu but i need your opinion to know if i should go back to windows 8 even tho gta works great14:31
ubuk2, i will try to help with your PPOE issue in  a moment14:31
betraydhe doesn't have a ppp.conf14:32
=== qos is now known as qos|away
=== syncsys_ is now known as Quest
designbybeckok ubu mount shows it is now connected14:32
k2ubu : try to comment in taht page itself14:32
pero_pHi! i have problem in running 'cc1' with this error: "/4.4.0/cc1: error while loading shared libraries: libmpfr.so.1: cannot open shared object file: No such file or directory". please help me! i'm tired of searching, nothing useful found. :(14:32
ubusamg__, windows 8 < ubuntu14:32
mdhsamg__: if you like to use a lot of windows applications, windows might be better for you. don't forget you could run 7 instead of 814:32
ubuk2, will do when I am done helping designbybeck14:32
ubudesignbybeck, ok, now what does ls -la /media/ report back?14:32
pero_pand i installed libmpfr-dev too,14:33
k2i will wait14:33
pero_pbut not worked14:33
designbybeckhttp://www.pasteall.org/41843 ubu14:33
designbybeckoh wait14:33
betraydpero_p: how did you install14:33
k2ubu: but plz comment here >>>http://askubuntu.com/questions/288504/why-doesnt-my-pppoe-connection-connect-to-the-internet14:33
designbybeckubu: http://www.pasteall.org/4184414:33
=== jhirley_ is now known as jhirley
k1lk2: either state your problem in here or stick to askubuntu. but dont advertise your askubuntu question in here please.14:33
samg__@ubu @mdh i figured out that most of those apps i dont need mostly the issues im having and apps i want to come is unity player and i cannot install skype witch il try later but gta seems to be working well soooo should i just stay with ubuntu?14:33
brian____Anyone have a suggestion for a widely supported USB wifi adapter?  I have two that I can't get to work without using the mfg drivers which will break too easily for the application14:33
ubudesignbybeck, lol14:33
ubuk2, i understand. i am currently still helping someone else14:33
QuestI need a biomatrix (finger / thumb impression) tool on which employees put thumbs and the time and their id no. name etc comes on screen and is also feeded for HR and their pay calculation purposes. My question is that what model / make should I buy that also supports Linux OS and can be operated by open source softwares. 2. are there any open source softwares that do it (for linux and windows) ?14:33
pero_pbetrayd, through apt-get install libmpfr-dev14:34
ubusamg__, it's up to you obviously. if you still need windows try dual-booting or even a VM with windows in it14:34
k2k1l : nobody peeks at your question at askubuntu14:34
mdhsamg__: stick with ubuntu if you like it, if not there's always windows or there are other linux distros too you can try14:34
samg__is there vmware for ubuntu @ubu14:34
k2it has to be spread14:34
samg__just incase14:34
betraydpero_p: cc1? what seems to be the problem that you have to go this far14:34
samg__@mdh i love ubuntu itws just u know ahahhah14:35
k2samg__ : same here14:35
pero_pbetrayd, actually this is cegcc's cc1 file(for windows CE compiler)14:35
ubusamg__, i am not sure, i've run virtualbox before but never vmware14:35
mdhsamg__: i'm not sure but I think vmware makes a linux client14:35
ubusamg__, linux has a steep learning curve for sure.14:35
pero_pbetrayd, cegcc runs cc1 as a part of compile process14:35
samg__@ubu soooo theres vbox for ubuntu?14:35
ubusamg__, yes14:35
samg__@mdh if there is then imma use it14:35
pero_pbetrayd, and this error occurs every time i want to compile, and then i can't compile!14:35
ubudesignbybeck, you still here?14:35
samg__@ubu does it run xp well/14:35
designbybeckyes ubu14:36
samg__@ubu or 814:36
ubusamg__, depends how much RAM you have to dedicate to the guest OS really14:36
ubudesignbybeck, ok, what's the output of the new ls -la /media/14:36
betraydpero_p: in the old days i think installing needs an LDCONFIG did it get mentioned in the README14:36
Riley-hey guys im having issues with the u 13.04 flash player for some odd reason theres a solid bard at the top of videos if tried disabling acceleration and everything ive looked all over for this and theres nothing in the forums and on my suse 12.3 tumbleweed install flash was fine14:37
samg__@ubu i got like 4gbs of ram14:37
samg__@ubu imma just use it in case14:37
k1lsamg__: there is vbox, vmware, qemu, kvm etc etc etc14:37
Riley-im on intel hd 3000 graphics14:37
designbybeckubu:  http://www.pasteall.org/4184514:37
pero_pbetrayd, no, the README file is nothing tell about installing, just where to copy extracted files(there was no install)14:37
samg__@kll imma use that :PPPPPPPP but guys any suggestion on how to connect to my remote pc14:37
mdhsamg__: what is the remote pc running?14:38
ubudesignbybeck, ok, and what's the output of the mount command?14:38
samg__@mdh ubuntu 13.0414:38
ubusamg__, what is your purpose on the remote machine?14:39
samg__@ubu accesing it form school14:39
ubusamg__, to just get a file? to control it fully? to admin it?14:39
designbybeckubu: /dev/sdb1 on /media/beck/Backup type ext4 (rw,nosuid,nodev,uhelper=udisks2)14:39
ubusamg__, to do what though14:39
samg__@ubu jsut to control14:40
ubudesignbybeck, so you already have a folder within your partition of /dev/sdb114:40
designbybeckit made that lost+found one though14:40
designbybecki didn't make that ubu14:40
ubudesignbybeck, what does sudo fdisk -l show for the filesytstem of sdb1?14:40
samg__@ubu just for controling from schooooool14:40
betraydpero_p: i would check ls /usr/lib/libmpfr* or whereever they told you to install ti, make sure Configure is told where you put that 'missing' lib14:41
=== syncsys__ is now known as Quest
Riley-does anyone have any suggestions14:41
designbybeckubu: http://www.pasteall.org/4184614:41
pero_pthe execution of 'locate libmpfr.so'14:41
ubudesignbybeck, im confussed, you didn't have a /media/beck/ folder prior to mounting your external device correct?14:41
ubusamg__, what type of machine will you be sitting at your school, the OS?14:42
designbybeckoh correct ubu this last time, we deleted beck totally, and when I plugged in the disk it made beck14:42
rickdrinkhi, guys14:42
samg__@ubu windows 7 64 bit14:42
pero_pbetrayd, you see, i have libmpfr.so but no libmpfr.so.1, so i evened tried symlink libmpfr.so.1 but not worked again!! :(14:42
ubudesignbybeck, ok, it appears like the external drive is formatted in a form of linux filesystem, most likely ext something, either ext3 or ext4.14:43
wilee-nileesamg__, You can tab complete nicks @ does not notify them.14:43
betraydpero_p: that first symlink, renamed andpointing to where (old though, not 1)14:43
designbybecki did format it back to ext4 ubu14:43
samg__@wilee whaaa14:43
samg__wilee-nilee: ohhh14:43
ubudesignbybeck, and you said the drive is blank?14:43
samg__ubu: so windows 7 64.bit14:44
designbybeckother than the lost+found that it made when I formated it to ext414:44
ubudesignbybeck, can you please unmount it, then run gparted, completely erase it's partition table, create a new partition table, and format it as ext3?14:44
pero_plrwxrwxrwx 1 0 0 16 Apr  4  2012 /usr/lib/x86_64-linux-gnu/libmpfr.so -> libmpfr.so.4.1.014:44
ubudesignbybeck, i know you said that BUT it's very odd you formatted it BUT it still contains a folder called Backup14:44
designbybeckok ubu14:44
rickdrinkI got a fresh Ubuntu 13.04, in order to install ATI official drivers do I have to remove the current graphic drivers? Can I install the new drivers in a regular session or a terminal-only session is needed? Thanks14:44
ubusamg__, i use vncviewer14:44
designbybeckno Backup is the Label of the drive ubu14:44
pero_pbetrayd, /usr/lib/x86_64-linux-gnu/libmpfr.so -> libmpfr.so.4.1.014:44
djQuerygetting this error when trying to install nvidia drivers with jokey14:44
djQueryWARNING: /sys/module/nvidia_304/drivers does not exist, cannot rebind nvidia_304 driver14:44
wilee-nilee!ati | rickdrink14:44
ubotturickdrink: For Ati/NVidia/Matrox video cards, see https://help.ubuntu.com/community/VideoDriverHowto14:44
samg__ubu: is there something like logmein but for linux with almost thte same fuctions14:45
ubudesignbybeck, normally external drives are mounted to a folder named whatever the partitions/hdd label is, yours mounted to /media/beck14:45
chop1n[afk]samg__, check "ssh -X"14:45
betraydpero_p: after renaming it i think you have to either run ldconfig OR make sure Configure is told where to find mpfr stuff (that dir)14:45
adamk_rickdrink: What video card do you have?14:45
designbybeckubu:  but when It asked for a label I put in "Backup"14:45
ubusamg__, yes, i forget what it's called though.14:45
ubudesignbybeck, i'm very confused why it's created a beck folder and also a Backup folder14:46
designbybeckI have no clue about that ubu14:46
ubusamg__, google is your friend, i think it's nx server14:46
ubudesignbybeck, what does ls -la /media/beck/ return?14:47
designbybeckI am in gparted now, I named the lable "BACKUP" this time in all caps to see the difference14:47
samg__@UBU i dunno what to write lol :p14:47
pero_pbetrayd, thanks, i'm gonna try ldconfig14:47
ubudesignbybeck, getting some more java, be right back14:47
=== qos|away is now known as qos
designbybeckubu:  the output ....i'm formating the dirve again though: http://www.pasteall.org/4184714:48
PeterME_Hi, I've got a question about raring ringtail14:49
designbybeckwhat is it PeterME_14:49
designbybeckthe question14:49
samg@ubu sooo14:49
PeterME_While in Quantal I used gnome-panels to get the old Gnome look back14:49
ubudesignbybeck, if you're formatting the drive then the output would be irrelevant14:49
cfhowlettAtom6, greetings14:49
PeterME_And now that I upgraded to Ringtail the entire theme has changed.14:50
ubusamg, nx server14:50
samgubu:  i fucking love u14:50
designbybeckoh Not sure on that one PeterME_ I didn't use any rollback gnome stuff14:50
jaynextlol :P14:50
PeterME_Looks really bad though..14:51
ubudesignbybeck, which version of ubuntu is this again?14:51
PeterME_And where did appearences go from the system menu?14:51
samgubu: isint it for ssh?14:51
PeterME_All that's left is background..14:51
designbybeck12.10 ubu14:51
ubusamg, :)14:51
designbybeckI ahve the drive formated ast ext3 now ubu14:51
ubusamg, i believe nx server is basically a vnc viewer type software BUT wrapped within an encrypted protocal like ssh14:52
designbybeckubu:  http://www.pasteall.org/4184814:52
samg@ubu isint it for ssh?14:52
PeterME_I'm sure if I could just find back to how to change my theme I should be able to fix it back to normal..14:52
samgklafsndfas' dasnfksd14:53
samgdsagdsg sd a14:53
FloodBot1samg: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.14:53
PeterME_Aaah, there we go :) Found the Tweak Tool in the menu. Is this part of Raring or is it something that's been there for a while?14:54
ubudesignbybeck, 12.10 must handle external drives differently then 12.04 because when I plug in an external drive, it mounts it within /media/ and then uses the LABEL as it's folder name. So I am very confused by the beck folder14:54
ubudesignbybeck, so, you should be able to write to it with drwxr-xr-x14:55
designbybeckmaybe somehting with this drive ubu14:55
ubudesignbybeck, can you write to it?14:56
designbybeckit says root owns it14:56
designbybecknow i can't do a touch test14:56
ubudesignbybeck, i believe stuff get's automounted as root, which i am not entirely sure why ubuntu does that.14:57
designbybeckso the whole system could us it maybe ubu?14:57
designbybecki woudln't think that to be a good thing14:57
ubudesignbybeck, in 12.04, it mounts as my user NOT root.14:58
mustafa_I have installed Ubuntu and kept my old home partition as it is, without reformating in and my system gets lots of errors and acts very slowly?14:58
mustafa_any ideas why?14:58
ubudesignbybeck, it's possible, the entire system can't write to it though, only root14:58
cfhowlettmustafa_, old configuration files perhaps?14:58
cfhowlettmustafa_, what kind of errors14:59
mustafa_cfhowlett: So I should just delete old confs?14:59
cfhowlettmustafa_, not yet.  what kind of errors14:59
mustafa_cfhowlett: lots of system errors, and it's veryyyyyyyyyyy slow as if i was one a pentium 4 pc while i am on i5. and i got system error that there was a problem with /usr/lib/udisks/udisks-daemon14:59
mustafa_cfhowlett: you could say when i try to do anything i get an error15:00
=== dziegler is now known as dziegler_off
cfhowlettmustafa_, hmm.  that's a system error, not a config.  ask in the channel.  starbucks is closing so bye bye wifi15:00
mustafa_cfhowlett: other than the extremly slow in opeining and closing nautlius.15:00
designbybeckubu:  I plugged in a USB jump drive no prob, it let me copy files to it as expected15:01
cfhowlettmustafa_, unit?15:01
cfhowlettmustafa on unity?15:01
mustafa_cfhowlett: yes15:01
ubudesignbybeck, hmmm15:01
cfhowlettmustafa_, select the other desktop environment and see.15:01
ubudesignbybeck, what does the mount command show for the jump drive15:01
designbybecki copied files over15:01
mustafa_i don't have other desktop environment15:01
designbybeckubu: this drive is called Ubuntu: http://www.pasteall.org/4184915:02
ubudesignbybeck, yeap, that's what my fat32 drive mounts as also, ext3 external drives must get mounted as root and with only rwx for owner root15:04
designbybeckI had it as NTFS and EXT4 as well though ubu15:04
ubudesignbybeck, right, this is very odd to say the least15:04
designbybecklol! Well thank you very much for your help. I've learned a few things along the way15:05
ubudesignbybeck, can you chown the /media/beck/BACKUP directory?15:05
designbybeckI'll wait until I can get my other harddrive I've used before. That just means I can't backup until later today or tomorrow15:05
ubudesignbybeck, sudo chown $USER:$USER /media/beck/BACKUP15:05
yna1111Hi, can i also ask an Apachenrelated questiom here?15:05
PeterME_Anyone knows how to set a wallpaper to span multiple screens?15:06
ubuyna1111, you can try, not sure we can help15:06
designbybecklooks like that did chown to my username ubu15:06
yna1111I wanted to ask if someone knows a really good tutorial / howto for the redirection of virtual hosts with ssl15:07
designbybeckubu: http://www.pasteall.org/4185015:07
yna1111I getthe general concept but always faiö in details15:07
ubudesignbybeck, ok, now you should be able to write  to it. try to unmount it and remount and see if the owner is retained15:08
jeanbaptisteI moved some files from my other hdd and it moved them at about 90mbps, now im moving them back and it started moving at 3mbps and gives this error: Error splicing file: Input/output error. I installed pcmanfm and it still gives this error on some files im moving but atleast its moving them faster now15:08
yna1111Faiö = fail15:08
=== syncsys_ is now known as Quest
=== chop1n[afk] is now known as chop1n
yna1111Does anyone have a favourite beginners page maybe?15:08
designbybeckdoh!...we were so close ubu15:08
designbybeckubu:  still shows read-only15:09
ubudesignbybeck, you were able to chown it BUT it's still only read only?15:09
ubudesignbybeck, what does mount return?15:09
designbybeckubu: http://www.pasteall.org/4185115:10
ubudesignbybeck, it shows (rw) so clearly there is something wrong BUT i have no idea what15:11
ubudesignbybeck, what is the error, are you trying to write to it within nautilus?15:11
Quest are there open-source softwares that control biomatric and rfid  cards and manage HR functions like time in, time out that calculates pays with some other payroll functions and reporting?15:11
designbybeckubu: http://www.pasteall.org/pic/show.php?id=5038015:12
asker1304how do we install NVIDIA DRIVERS to UBUNTU 13.04   ?15:13
ubudesignbybeck, hmmm, it's beyond me why it's mounting as read only. can you unmount it, then plug it back in and look at the end info from entering the command dmesg15:14
Chaos_ZeroHello, after re installing with 12.10 I get "internal system errors" once in a while. Besides the error box there have not been any consistant problems. Is thie anything to worry about or just ignore it?15:14
ubudesignbybeck, also, apparently in 12.10 they did make it so all external drives mount in /media/username/mountpoint versus just /media/mountpoint like in 12.0415:14
designbybeckubu: http://www.pasteall.org/4185215:15
asker1304how do we install NVIDIA DRIVERS to UBUNTU 13.04   ?15:15
carcinogen75Hello. can you answer? It's ease to get GEO location by IP. But can i get all IPs by GEO location? Is there any service online to do this?15:16
ubudesignbybeck, ah, i see error writing superblock messages. also, lost page write due to I/O error on sdb115:16
asker1304Anybody help me how do we install NVIDIA DRIVERS to UBUNTU 13.04   ?15:16
BluesKajasker1304, alt=F2 , type additional drivers15:16
BluesKajcorrection alt+f215:17
ubudesignbybeck, could be an indication that the drive is not healthy. when a drive is unhealthy the system will make it read only so that it doesn't cause further destruction of the disk15:17
asker1304it does not work!15:17
asker1304how do we install NVIDIA DRIVERS to UBUNTU 13.04   ?15:17
ubudesignbybeck, i wouldn't use it as a backup drive seeing that superblock write error15:17
asker1304how do we install NVIDIA DRIVERS to UBUNTU 13.04   ? UBUNTU DOES NOT RESTART15:17
BluesKajasker1304, alt+F2 , type additional drivers15:18
ubudesignbybeck, i would run some tests on the drive and even then, not sure i would trust it. how old is the drive15:18
designbybeckok ubu, Again thank you for all your help. I'll wait until I get my other drive15:18
designbybeckubu:  have any apps or tasks for testing the drive?15:18
ubudesignbybeck, no problem, i enjoy helping others15:18
asker1304how do we install NVIDIA DRIVERS to UBUNTU 13.04   ?additional drivers i did but does not restart15:18
designbybeckI don't think it is to old at all, 3-5yr, had only been uses a few times15:18
philinuxasker1304:  what graphics card you using15:19
BluesKaj!repeat | asker130415:19
ubottuasker1304: Don't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. While you wait, try searching https://help.ubuntu.com or http://ubuntuforums.org or http://askubuntu.com/15:19
asker1304NVIDIA GEFORCE 22015:19
ubudesignbybeck, i think gnome-disk-utility can test drives15:19
philinuxasker1304:  when in additional drivers does it offer to install a recommended driver15:20
designbybeckThank you ubu15:20
ubudesignbybeck, not sure if gnome-disk-utility is available in 12.10, check the repo's15:20
asker1304i installed recomended driver15:20
asker1304it does not work15:20
philinuxasker1304:  ok so your problem is that machine refuses to restart to activate the driver?15:21
ubudesignbybeck, your best bet is to use the manufacturer's test tools, the crappy thing is that they mostly run in windows. some can be run from a live cd i think. what is the drive manufacturer?15:21
asker1304recomended driver opens a blank page nothing in it15:22
philinuxasker1304:  ok so you mean u restart the machine and you get a black screen?15:22
genii-aroundasker1304: You may not have the "restricted" repository enabled15:22
asker1304Whu ubuntu 12.04 lts can use NVIDIA BUT NOT 13.04 ?15:23
asker1304no black screen normal purple- brown screen nothing in it15:23
adamk_asker1304: Stop yelling. All you're going to do is annoy people  and keep them from wanting to help you.15:23
asker1304adam stop bulshitting if u dont know the answer shut up15:24
philinuxasker1304:  is that purple screen after you login normally or before u login15:24
asker1304but nothing in it15:25
* wilee-nilee puts asker1304 into ignore lol15:25
BluesKajasker1304, open the console  , sudo apt-get install nvidia-current15:25
philinuxBluesKaj: it sounds like it's activated but unity borked on login15:25
philinuxasker1304:  was 13.04 running ok before nvidia installed15:26
asker1304how do i open console if my screen is blank?15:26
ubugotta run guys, peace out15:26
BluesKajphilinux, well ,I'm close to the ignore point now15:26
asker130412.04 worked fine15:26
philinuxasker1304:  ctrl+alt+t  didj you upgrade15:27
BluesKajasker1304, then drop to a tty , ctrl+alt +f1 ,, and run the command15:27
asker1304no i formatted back to windows 815:28
mahlukatselam millet15:28
philinuxasker1304: so 13.04 is a clean install. did it run ok once first installed15:28
asker1304btw ubuntu boots in 2 minutes w8 30 secs15:29
philinuxasker1304: ? ^^^15:29
asker1304ok i reinstall and back again maybe 30 mins...15:29
philinuxasker1304: dont install nvidia until it running ok15:30
trom66hi i need driver for intel g33/g31 for ubuntu 12.1015:30
asker1304i bet sudo apt-get install nvidia-current wont work but i will try15:30
asker1304<philinux> so you guys know ubuntu 13.04 cant run NVIDIA ALREADY...15:31
philinuxasker1304: running nvidia here15:32
k1lasker1304: im running a 13.04 with nvidia.15:32
nafac13.04 IS NOT READY15:32
Walextrom66: that's unlikely, it is quite old, so probably already supported.15:32
nafactold you before15:32
nafacHaters gonna hate15:33
asker1304yes but it gives noise of fan when i dont install driver15:33
nafacI speech truth15:33
philinuxnafac: you mean speak15:33
k1lnafac: stop that now15:33
nafachttps://blueprints.launchpad.net/ubuntu/raring https://bugs.launchpad.net/ubuntu/raring15:34
BluesKajasker1304, I have nvidia working on 13.04 , but then I don't run unity/gnome either15:35
opuscontinuumhow do I see what network resources I have access too?15:35
asker1304why is that so hard to put nvidia driver works 12.04 lts very good but not 13.04 why?15:36
trom66i can help for install15:36
tgm4883I've got nvidia proprietary drivers working on 13.04 using unity15:36
k1lasker1304: depends on your hardware.15:36
k1lasker1304: did you try !nomodeset15:36
tgm4883using 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] (rev a2)15:37
jackbrownAfter a crash my file system is in read only mode and it doesn't allow me to work with my OS. How can i fix it ? (change file system from read only to read write ?)15:37
user82well bugs like "fglrx breaks the complete installation" are also present...or did anyone get fglrx working with a hd4850?15:37
dhs227Error 'proc/self/mem' : cannot skip to specified offset. But it suppose to work on earlier, the command is "dd if=/proc/self/mem of=linux-gate.dso bs=4096 skip=1048574 count=1"15:37
philinuxasker1304: i had trouble with some of the nvidia driver options but nvidia-current runs fine15:37
ActionParsnipjackbrown: I suggest you boot to liveCD / USB and run an fsck on the partition15:38
asker1304ty for all i will reinstall ubuntu ty for helping it wont work but ty anyways...15:38
BluesKaj!who | asker130415:38
ubottuasker1304: As you can see, this is a large channel. If you're speaking to someone in particular, please put their nickname in what you say (use !tab), or else messages get lost and it becomes confusing :)15:38
jackbrownActionParsnip: mhh15:39
DJRWolfsomeone I know keeps going on about how Canonical sells local search information, anyone have anything good I can counter with?15:40
jerkyhi everyone. I have a question: how can I add a "," after the first character of every line in vim?   So, for example, the lines are as followed: "1 Blah" I want it to be "1,Blah" at for every line.15:40
tgm4883DJRWolf, I'm unsure if that is completely accurate or not15:40
adamk_Any idea why, after upgrading via do-release-upgrade, and rebooting, I still get told that there's a new release available and to run do-release-upgrade?15:40
wilee-nileeDJRWolf, A look of derision and a chuckle.15:41
she_dyedjerky i think q for record steps (like a macro)15:41
tgm4883jerky, you can use a sed replace along with a regex for that15:42
jerkytgm4883: do you know a sed command that will do that?15:42
DJRWolfthe only thing I recall seeing was "anonymous usage stats"15:42
tgm4883jerky, sec, testing15:42
Rodrigo__What is this channel for?15:42
DJRWolfRodrigo__ Ubuntu15:43
tgm4883DJRWolf, specifically, they are talking about the shopping lens probably15:43
jerkytgm4883: cheers!15:43
DJRWolftgm4883 I don't recall ever using that, is that part of Ubuntu One?15:43
Rodrigo__Can I use this channel to ask general questions about Ubuntu?15:44
tgm4883DJRWolf, no, it's a default lens in unity in 12.1015:44
DJRWolfRodrigo__ yes15:44
DJRWolftgm4883 ahh, I go LTS, so still roll'en with 12.0415:44
Rodrigo__Folders named paxHeader have been created at random locations, is that normal?15:45
TuomasTCan I have snd_* alsa modules reloaded (while pulseaudio is off temporarily) after suspend to ram?15:46
TuomasTMy sound card doesn't work until that is done after suspend to ram15:46
tgm4883jerky, I'm slightly confused by the dataset. You mention the line is '1 blah' and you want it to be '1,blah', so are you wanting to insert the ',' character, or replace that space with ','?15:46
WalexTuomasT: yes.15:47
jerkytgm4883: I want to replace the space with a "," if possible15:48
jerkysorry about that.15:48
TuomasTWalex: Does Ubuntu do anything similar by default?15:48
johnjohn101join #perl15:48
tgm4883jerky, ah ok. Just the first one or every space in the line?15:48
jerkyjust the first space after the first character of every line.15:49
WalexTuomasT: yes, indeed it is a bit surprising you have that issue, perhaps your specific sound module is not listed in the resume script15:49
jerkyAppreciate it15:49
=== maxim is now known as Guest37330
yatrigaguys my virtualbox is not able to start due to an error please help15:50
WalexTuomasT: however perhaps this is because there is more than one "power management" script collection15:50
TuomasTWalex: It is somewhat uncommon card. (snd_ice_1712). Where is the configure fil located?15:50
tgm4883jerky, ok, this will replace the first space in every line with a ,   sed 's/ /,/'15:50
r0shguys, i'm installing wget from source. i made a directory at /tmp/build, extracted *.tar.gz in it. cd to wget* directory. made configure executable, and tried ./configure .. says permission denied. did sudo ./configure, got same results. what could be the problem?15:50
TuomasTno, snd_ice1712 / m-audio 249615:50
r0shI'm on Ubuntu 12.04 if that matters15:50
WalexTuomasT: it depends on which power management suspend/resume set of scripts you are using.15:50
yatrigait says unable to create a object15:51
WalexTuomasT: try to check in your logs if there are are any hints on that.15:51
TuomasTWalex: Well, nothing at /etc/pm/config.d/15:51
WalexTuomasT: that is for local modifications. Have a look at 'dpkg -L pm-utils | sort | less'15:52
jerkytgm4883: thanks for that!15:53
WalexTuomasT: you probably want to put in '/etc/pm/config.d/' something that adds to the rules in '//usr/lib/pm-utils/sleep.d/'15:53
tgm4883jerky, yw15:53
roshwhere i can ./configure at $HOME15:54
brian____Ok, I am missing something, or a lot of somethings.  I am trying to install a netgear usb wifi adapter that uses the rtl8192cu module.  I gave up on the opensource ones included and downloaded and compiled the realtek ones.  That worked, I added the module to load into /etc/modules and now I have a 8192cu loaded, however, my usb device has no idea that is the module it should be using.  What am I missing?15:54
abradleyI'm running ubuntu virtually and I need to set a static ip but in interfaces there is no eth0 mentioned, only "auth lo iface lo inet loopback". How would I go about setting a static ip when I don't have any ethx referenced?15:55
abradley^ wired15:55
samijamwhy does ubuntu 12.04 say it is 693 MB when I am downloading and then 727 MB after it is finished?15:55
adamkr0sh: Perhaps /tmp is mounted noexec (assuming /tmp is a separate filesystem).  Perhaps the configure script is not set to be executable.15:55
TuomasTWalex: According to PM logs reloadingof snd_ice1712 fails because pulseaudio is running15:56
BluesKajabradley, http://www.cyberciti.biz/tips/howto-ubuntu-linux-convert-dhcp-network-configuration-to-static-ip-configuration.html15:56
TuomasTSo I need to have pulseaudio stopped before and resumed after suspend to ram15:56
roshadac, It's set executable. and i will look into the mount options. thanks. :)15:56
adacrosh, I'm probably the wrong guy you pinged ;)=15:57
WalexTuomasT: I think stopping and resuming PulseAudio on resume is a standard thing, surprised it did not quite happen yet. Perhaps that are PulseAudio suspend/resukme config files15:57
samijamhmm, actually it says 727MB in the file manager, but 694 MB from ls15:58
TuomasTWalex: Anyway, thanks for help!15:59
wdonkeywhen i install a .deb from a download in the terminal, does the .deb file has to be anywhere specific, or do i need to specifiy its location when typing the dpkg cmd line ??15:59
samijambrasero also sees it as 727 MB, but says there is 10 MB space free for a 700 MB disc16:00
samijamI just want numbers to add up!16:00
WhiteDawnsamijam:  ls reads in bytes, file manager reads in bits16:00
samijamok, but when I start the burn it says 693 MB, so Brasero is not consistent16:00
tgm4883wdonkey, you can specify it's location16:00
SuperLagAnyone else find that 13.04 does not remember your default browser choice, if you set it to something other than Firefox?16:00
tgm4883wdonkey, or just do it from the same directory16:01
ubottulukariell: No warez here! This is not a file sharing channel (or network); read the channel topic. If you're looking for information about me, type « /msg ubottu !bot ». If you're looking for a channel, see « /msg ubottu !alis ».16:01
SuperLagI'm using the Xubuntu version.16:01
genii-around!it | lukariell16:01
ubottulukariell: Vai su #ubuntu-it se vuoi parlare in italiano, in questo canale usiamo solo l'inglese. Grazie! (per entrare, scrivi « /join #ubuntu-it » senza virgolette)16:01
wdonkeytgm4883: how do you get to that directory again ?16:01
WhiteDawnsamijam: sorry, i got that wrong, ls reads a gb as 1024 mb, while filemanager reads it as 1000. As for basero, its prob just overhead for the cd filesystem16:01
tgm4883wdonkey, 'cd /path/to/dir'16:01
wdonkeythanks sir16:01
wdonkeyor mam16:01
tgm4883wdonkey, or you can double click on the deb file16:01
samijamWhiteDawn, yeah I figured ls would be more accurate.  anyway, it looks like I might end up with a successful burn... i hope16:02
wdonkeytgm4883: tryed but after the install it says it failed to load module, to reinstall the app16:02
wdonkeythanks tgm488316:03
=== jhirley_ is now known as jhirley
abradleyBluesKaj, thanks for the input. In that page the examples reference a certain nic such as eth0. My network/interfaces do not. They only reference "auth lo iface lo inet loopback". How would I go about setting a static ip when I don't have any ethx referenced?16:03
=== qos is now known as qos|away
tgm4883abradley, are you using ubuntu server or desktop?16:04
rd1381how can i change my locale setting in ubuntu(gnomke)16:05
abradleytgm4883, I'm running ubuntu desktop in a vm (esxi)16:05
tgm4883abradley, then you need to set static IPs via network manager16:05
BluesKajoj abradley seems that 's avirtual thing ,of which i have little knowledge16:05
abradleycool, I'll look into network manager16:05
abradleythanks for both of your input16:05
stupetedhi i just wanted to connect to VPN and i set up all and now a screen show up whit "Enter password to unlock your login keyring"16:06
stupetedwhat shoud i do?16:06
usr13WhiteDawn: I don't think it's a difference between bits and bytes.  It is because one is showing actual file size and the other is showing how much disk space is devoted to the storage of the file.16:06
johnjohn101what is the difference between fakeroot and sudo?16:07
Chaos_ZeroHello, after re installing with 12.10 I get "internal system errors" once in a while. Besides the error box there have not been any consistant problems. Is thie anything to worry about or just ignore it?16:07
usr13WhiteDawn: samijam I'm talking about the difference in ls and what the file manager reports, and it's like the difference you see between ls and du (du will show smaller size too, for same reason).16:08
=== ferret__ is now known as ferret_
QwellHi!  I just learned that you could alt-tab to an application with multiple windows, pause, and then continue to tab to switch through those windows.  Is it possible to just always group by windows, and not have to do the pause?16:09
Walexrd1381: there are global locale settings and per-user ones. The global ones are in environment variables. Alos look at '/etc/default/locale'16:09
wilee-nileeChaos_Zero, That is apport, look at what the errors are it will report on even 3rd party errors which are not reportable. There is also a ignore at times shown. Personally I remove apport at times.16:10
usr13WhiteDawn: samijam We usually see bytes designated as B and bits b, but mostly we measure B (bytes) and the difference is 8x.16:10
roshadamk, It's set executable. and i will look into the mount options. thanks. :)16:10
Walexjohnjohn101: they do completely different things. 'sudo' gives real privileges, 'fakeroot' does not.16:11
roshadac, hey! there are so many people here :D16:11
usr13Qwell: Yea, same as MS Windows.  Been that way for a long time.  You've learned to use a very handy tool.16:11
Qwellusr13: You misunderstand.16:11
rd1381do i nedd to reboot for changes to this file to take effect?16:12
usr13Oh sorry16:12
ActionParsnipChaos_Zero: I'd run memtest86+ from grub16:12
usr13Qwell: I use Alt-Tab to switch windows.16:12
Qwellusr13: The pause part, I learned.  I'm an adult male.  I learned alt-tab many many porn windows ago. :p16:12
ActionParsnipQwell: SuperL + W will show all windows16:12
QwellActionParsnip: I don't mouse.16:12
ActionParsnipQwell: its not a mouse thing....16:13
ActionParsnipQwell: both are on the keyboard16:13
QwellActionParsnip: How do I select a window in there?16:13
rd1381Walex:do i nedd to reboot for changes to this file to take effect?16:13
Qwelloh, arrow keys...  yeah, that's no good either.16:13
ActionParsnipQwell: do cursors work?16:13
usr13Qwell: Ok, I'm lost.16:13
usr13Qwell: Oh right and left arrow.  Yes, very handy.  If you go to tty6, (Ctrl-Alt-F6), you come back with Alt-RightArrow.16:14
johnjohn101tx Walex16:14
usr13Qwell: Or to tty5 with Alt-LeftArrow16:14
QwellLet me rephrase my question.  How do I tell Unity to show windows in alt-tab, rather than applications?16:15
usr13Qwell: And you can switch irssi windows that way too.16:15
coolothello guys16:15
Walexrd1381: no, but you need to log-in again.16:15
wilee-nileeChaos_Zero, Here is some more info if you like. https://wiki.ubuntu.com/Apport16:15
coolotnewbie here16:15
Walexrd1381: but you should reboot if you have some daemons that depend on locale settings.16:16
rd1381do anybody else gets freezes on ubuntu (kubuntu) 13.04 fresh insytall?16:16
Walexrd1381: that's not a good question ("anybody else")16:16
coolothow can i transfer my mp3 files located in different sub directories  with out accessing the sub folders one by one to a single folder?16:17
rd1381because i get them randomly and i tried everything and nothing works16:17
usr13Qwell: Aren't  windows and applications interchangable terms, (unless of course, if you have more than one instance of the same application open).16:17
Qwellusr13: No.16:17
usr13Qwell: That's just the way it works.16:17
Rodrigo__Folders named paxHeader have been created at random locations, is that normal?16:17
Walexrd1381: that's a statement, and it brings better information...16:17
Walexrd1381: are these temporary freezes or must-restart freezes?16:18
coolothow can i transfer my mp3 files located in different sub directories with out accessing the sub folders one by one to a single folder? using the command line16:18
Walexrd1381: because there are *many* possible causes of both temporary and must-reboot freezes.16:18
rd1381complete freezes that not even harddrive works16:18
FluxxHi all, I managed to change the resolution of my video using xrandr but when I reboot it is all messed up again. How can I fix it ? using ubuntu 12.0416:18
Walexcoolot: for replies within 1 minute please supply your Uranium-level account number...16:18
usr13Qwell: But you can change it if you want.16:18
adamk_Fluxx, Create an xorg.conf file to specify your preferredmode, or add the xrandr command to your desktop environment session.16:19
usr13Qwell: Disable the keyboard shortcuts for Unity's switcher by unchecking CompizConfig Settings Manager ? Desktop ? Ubuntu Unity Plugin ? Switcher ? Key to start the switcher ? Enabled and Key to start the switcher in reverse ? Enable16:19
banaancan anyone help me fixing this problem with Tomcat 7 : java.lang.ClassNotFoundException: org.apache.catalina.startup.Catalina16:19
usr13Qwell: Disable the keyboard shortcuts for Unity's switcher by unchecking CompizConfig Settings Manager > Desktop > Ubuntu Unity Plugin > Switcher > Key to start the switcher > Enabled and Key to start the switcher in reverse > Enable16:19
banaantrying to fix it for an hour now lol :S16:20
Fluxxadamk_: I am a sort of noob to linux, can I add the command in the startup apps?16:20
rogierCan anyone help me connect my desktop to my laptop using cat5 so i can use internet (the laptop is connected trough wifi.16:20
coolotWalex : i am not sure what's Uranium-level account number...16:20
usr13Qwell: Enable the Static Application Switcher by checking CompizConfig Settings Manager > Window Management > Static Application Switcher > Enable Static Application Switcher16:20
Walexcoolot: or put another way please wait at least 5-10 minutes before repeating a question...16:20
possHi guys, I seem to have stumbled into water a little deeper than I'm comfortable with :)16:21
coolotWalex : understood thanks16:21
Walexcoolot: and BTW you can "flatten" a directory hierarchy in several ways, many of which a bit tricky.16:21
adamk_Fluxx, I believe so, yes.16:22
Walexcoolot: for example by using 'find' to collect the names of the files, and then just 'mv'ing or 'ln'ing them to a single directory.16:22
usr13Qwell: There is a GUI for it,  ccsm16:22
banaancan anyone help me with setting up tomcat 7 iḿ getting weird errors16:23
possSo I encountered a bug in TF2, and thought maybe updating my graphics drivers might help.  I dropped out of X, stopped lightdm, then updated from 304.30 to 313.3016:23
pero_pbash script to find incomplete downloaded images ??16:23
usr13rogier: If you want to share the internet connection of your Ubuntu machine with other machines in the network see  https://help.ubuntu.com/community/Internet/ConnectionSharing16:23
=== deegee is now known as drussell
rd1381Walex: any suggestion about how to trace it?16:24
coolotWalex : i tried to use the find command but it searches all of my mp3 files. i just want to move all of my AC DC mp3s in a single folder.16:24
possAfter a restart I just got left with a blinking cursor. So I booted into recovery mode and ascertained that my ssd had been set to read only16:24
banaancan anyone help me with setting up tomcat 7 iḿ getting weird errors  iḿ getting desperate now :(16:25
ActionParsnipbanaan: tried in the tomcat channel?16:25
banaanoh sorry :)16:25
usr13poss: Was the blinking cursor preceeded by login:  ?16:25
possSo I restarted fro a previous kernel, and suddenly the drive errors went away.16:25
ActionParsnippero_p: i cant see that really being possible, the corruption in an image could be part of the image.16:26
lenimActionParsnip: you stopped with catnip16:26
Walexrd1381: if it is temporary, it could be caching of writes or disk read errors. if it is permanent, most likely some hardware issue, probably power/heat or GPU, else some kernel bug16:26
possBut now I am stuck in a previous kernel without an NVIDIA driver16:26
ActionParsniplenim: huh?16:26
ActionParsnipposs: tried:   sudo nvidia-xconfig16:26
Walexcoolot: you can do that with 'find'. Are you trying to move files _by tag_ instead of name?16:26
usr13poss: If you keep it all in one post, it will be easier to understand your issue?16:26
lenimActionParsnip: you said tomcat and catnip16:26
ActionParsniplenim: ahhh, nice hahahaah16:27
pero_pActionParsnip, yeah, thanks :). i just have a script that download images with wget, some of downloaded ones are corrupt, i like to see a way to find out them and try to redownload16:27
possnvidia-settings says I have no nvidia driver, even though nvidia-xconfig, and the conf file both say my driver is set to nvidia.16:27
ActionParsnippero_p: you could redownload to tmp and calculate md5sum on both and compare16:27
Fluxxadamk_: thanks will try to reboot now and check if it worked16:27
ActionParsnipposs: then check in /var/log/Xorg.0.log16:27
rd1381Walex: i tested wit memtest and windows doesnt freez so i dont think its a hardware problem .i have hybrid graphic card on my notebook (asus n53sv) but the change of driver for nvidia and removing it didnt help and i use bumblebee so its not nvidia fault eaithr16:28
lenimPoss did you reboot16:28
possSo, my problem is two fold:  I can not activate the graphics driver, and even if I do, when I restart it'll just default to the more recent kernel16:28
MKCoinHuh. I'm having an issue where I can't rename any files via Nautilus. Any idea why that would be? It's greyed out in the context menu, as are Cut, Copy, etc...16:28
possyes, an uninterupted boot cycle still results in a blinking cursor16:28
pero_pActionParsnip, :D yeah, but the connection speed is really slow!! 15KBps download LoL16:28
genii-aroundMKCoin: Quite possibly you're trying to operate on files which are not in /home/you-username/   directory.16:29
MKCoinIt is those files I cannot alter; I can alter files elsewhere16:29
lenimposs: boot ti grub . Press F6. Select NOMODESET.16:29
Walexrd1381: that MS-Windows does not freeze means little. There is relatively error checking in MS-Windows and sometimes it just skips over errors... And 'memtest' only tests memory.16:30
Walexrd1381: to find out what is happening, check the logs around the time of the freeze...16:30
Walexrd1381: try to notice whether you are doing something specific at that time.16:30
posslenim, I will try that, give me a sec to reconnect here on my phone16:30
coolotWalex : i'll do some more studying using find.... i am not sure with moving files _by tag_.....i am very new with linux.... so forgive me if i am asking a lot of questions16:30
rd1381Walex: i know but that all the hardware checking that i can do and because it happens randomly i dont think i can check hardware to see the error16:31
Walexrd1381: keep 'vmstat 1' running in a terminal and check whether when it freezes a lot of memory is in use.16:31
genii-aroundMKCoin: The next possibility is that the files you are trying to operate on are locked because another application or process is exclusively using them16:31
Walexcoolot: MP3 files have embedded tags with artist name, album name, etc.16:31
lenimposs: if F6 dont work let me know.16:31
ActionParsnippero_p: thats reall only one way to know, unless the server side holds MD5sums of the good images (or if you can SSH over then calculate MD5 there)16:32
posslenim: since this issue started, if I don't make my grub selections within ten seconds, the keyboard stops working.  So this may take a minute16:32
Walexcoolot: BTW most graphical file managers allow you to sort/filter tagged MP3 files or untagged files by tag or name.16:32
Qwellusr13: ccsm > Unity > Switcher > Key to flip through windows in the Switcher.16:33
rd1381Walex: i check all the logs in /var/log folder but nothing seems to be happening at the time of freez16:33
JoMsHello, I am currently following this guide (http://wiki.xbmc.org/index.php?title=HOW-TO:Install_XBMC_on_Ubuntu/HOW-TO_3) for installing xbmc on ubuntu 13.04 minimal, but I have encountered a problem when installing the nvidia-drivers. It seems there's no package called nvidia-glx-xxx, anyone have a tip regarding how I should get the correct drivers in an easy way?16:34
coolotWalex : i am practicing to move and manipulate files using command lines..... using graphical file manager is my last resort.....16:34
=== anonymous is now known as Guest24591
usr13Qwell: Yea, you should be able to set it to what ever you want.16:36
lenimposs: if Fn6 does not work. Press E for edit. Scroll to word QUIET. Type in NOMODESET after word QUIET. Press Ctrl-x to boot16:36
MKCoinHm it looks like the files were moved into a read only "group", is it safe to change them to full access? I'm still listed as owner.16:36
Poss-mobF6 does nothing at grub16:36
pero_pActionParsnip, thanks man, ;)16:37
lenimPoss-mob: look at post above.16:37
=== tjbiddle_ is now known as tjbiddle
brian____If I take a usb wifi adapter plug it into my 12.10 laptop and my dmesg runs through all of the setting up that device, and on 12.04 when I plug it in it only shows me the device is attached, does that mean it doesnt know what module to use?16:37
rogierHow do reboot the computer when it's stuck. The mouse and keybord don respond.16:37
usr13JoMs: sudo apt-get install xbmc16:38
Poss-mobOk, e works, but i took too long to write nomodeset and the keyboard stopped working. Ill keep rebooting and trying till i type it all16:38
lenimPoss-mob: read post above. Gotta go.16:38
nadir__any body ?16:38
JoMsusr13: installing xbmc is all fine, my issue is about installing the correct nvidia-drivers and avoid doing it manually16:38
usr13!info ubuntu-drivers-common | JoMs16:41
ubottuJoMs: ubuntu-drivers-common (source: ubuntu-drivers-common): Detect and install additional Ubuntu driver packages. In component main, is optional. Version 1:0.2.76 (raring), package size 34 kB, installed size 225 kB16:41
usr13JoMs: Actually, just go to nvidia.com16:41
JoMsusr13: thanks, I'll check that out16:41
usr13JoMs: lspci |grep -i vga16:42
JoMswell, nvidia.com makes it manually, and then I have to blame myself and nobody else when it screws up :/16:42
Walexcoolot: something like: find "$FROM" -iname '*acdc*.mp3' -print0 | xargs -r0 -I^ ln ^ "$TO"16:42
usr13JoMs: What is your video card.16:42
JoMsusr13: GT281 ION16:42
Poss-mobSo i added nomode set and hit f10 to boot, now im back to a blinking cursor16:43
usr13JoMs: 32bit? or 64?16:43
JoMsusr13: 6416:43
JoMsusr13: ubuntu minimal with no desktop environment installed16:44
JoMsusr13: but on the generic kernel16:44
usr13Poss-mob: Is the blinking cursor preceeded by "login:"?16:46
Poss-mobLol, no. I can login to f1-6, but f7 is just a cursor.16:47
usr13Poss-mob: Ok then, login16:47
usr13Poss-mob: and then sudo rm /etc/X11/xorg.conf  (or you can rename it, sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.bak)16:48
ubottuaptitude is another terminal-based front-end to APT. You may encounter problems on multiarch installs (11.10 and 12.04) as aptitude cannot  handle the same package with different architectures being installed at the same time. See http://pad.lv/831768 for more information.16:48
cousteauIs aptitude fixed?16:48
cousteau(I just got an update saying something about multiarch on aptitude)16:49
usr13cousteau: It's not broken.16:49
cousteau* Apply upstream multiarch-conflicts.patch to handle conflicts on multi-arch systems. (LP: #831768)16:49
ubottuLaunchpad bug 831768 in aptitude (Ubuntu Oneiric) "aptitude cannot handle conflicts with multiarch enabled" [High,Confirmed] https://launchpad.net/bugs/83176816:49
usr13cousteau: Read the above statement, (use apt-get).16:49
cousteauusr13, above statement was confusing and not too verbose16:50
Poss-mobAnd then nvidia-xconfig again?16:50
cousteauusr13, anyway, the reason ubottu recommends not to use it is the one that got solved on this update, right?16:51
usr13cousteau: I don't know about that but.  Whether it's a bug or lack of feature may be an ambiguous issue in relation to what you call it, but other than that, it's pretty clear.16:52
cousteau...yeah, since that link on ubottu is the same bug16:52
usr13cousteau: So why not just use apt-get?16:52
cousteaucause I'm used to aptitude (although I've started getting used to apt-get), and because I'm curious to know if the bug the bot says is the one that has been fixed16:53
cousteauin that case, the bot factoid may be updated16:53
MonkeyDustcousteau  first get the issue solved, with apt-get, then investigate further16:53
usr13cousteau: I use apt-get because it does better what aptitude used to do.  It is not complicated.  I recommend you use apt-get16:54
cousteauMonkeyDust, yeah, the update manager uses apt-get16:54
cousteauusr13, apt-get needs `aptitude show` and `aptitude why`, though16:54
cousteauand some things such as aptitude's automatic autoremove16:54
usr13And why would it matter?16:55
cousteauanyway, I've got to go now.16:55
usr13Ok, ttyl16:56
Poss-mobSo, i just tried deleting the conf and rerunning xconfig, didn't change anything. So i tried reinstalling the driver, it reinstalled fine. But i still have no GUI.16:58
onrwhat would be the reason an app with .desktop file doesn't show up in "open with" menu?16:58
Poss-mobThe nomodeset seems to have fixed the read only issue though.16:58
jwtiyarmy dvd writer not mounting in ubuntu , but in windows is ok16:58
AtumTjwtiyar: Try using a USB stick to boot ubuntu16:59
usr13Poss-mob: nvidia-settings or nvidia-xconfig16:59
usr13Poss-mob: Not so sure nomodeset was the issue to begin with.17:00
jwtiyarAtumT, i have installed ubutnu , but when i want to play dvd or cd its not mounting17:00
usr13!dvd | jwtiyar17:00
ubottujwtiyar: Ubuntu's default installation and repositories do not include packages needed to play commercial DVDs for legal reasons. For information on adding them, see https://help.ubuntu.com/community/RestrictedFormats/PlayingDVDs | For information on the legalities involved, see the "DVD" section of https://help.ubuntu.com/community/FreeFormats17:00
JoMsusr13: any chance you know a good way for disabling nouvaeu? it seems to be running even after being added to blacklist17:02
pero_phow can i check last 2 bytes of a file in bash?17:03
jwtiyarusr13, i think u didn't understand my Question17:03
wilee-nileejwtiyar, If you put discs in you see nothing?17:05
Ab3Ldo you know nethogs? it allows to see which process is using your bandwidth and the amount. now my question: how can i limit the bandwidth for a specific process?17:06
jwtiyarwilee-nilee, yes17:06
mzazaIs Ubuntu 12.10 slower than 12.04 or it's just me? I feel certain tasks are slower like nautilus and the overall performance. I just installed it about 1 hour ago.17:06
Poss-mobUsr13: can nvidia settings be run without a gui? As i said, i have tried xconfig. That is not tye issue, the conf file clearly says nvidia. But no display appears17:06
Luke23aehow do you tell GRUB not to display but to boot a specific OS right away?17:06
bekksAb3L: By setting up Quality of Service for your network.17:07
bazhang!info wondershaper | Ab3L17:07
ubottuAb3L: wondershaper (source: wondershaper): Easy to use traffic shaping script. In component universe, is extra. Version 1.1a-6 (raring), package size 14 kB, installed size 76 kB17:07
=== Thunder618 is now known as thunder618
bazhangLuke23ae, change the grub timeout17:07
mzazaSorry! I mean is Ubuntu 13.04 slower than 12.10? Is the overall performance slower?17:07
bazhang!grub2 | Luke23ae have a read17:07
ubottuLuke23ae have a read: GRUB2 is the default Ubuntu boot manager. Lost GRUB after installing Windows? See https://help.ubuntu.com/community/RestoreGrub - For more information and troubleshooting for GRUB2 please refer to https://help.ubuntu.com/community/Grub217:07
bazhangmzaza, faster17:07
mzazabazhang: Application like nautilus, is slower. And monodevelop is slightly slower.17:08
wilee-nileejwtiyar, Have you added the restricted-extras for the desktop you are using, or other codecs?17:08
bazhangmzaza, not here17:08
jwtiyarwilee-nilee, i dont remember17:08
bazhangjwtiyar, so install them17:09
Luke23aebazhang: I still have GRUB 1 ^^17:09
pero_phow can i check last 2 bytes of a file in bash?17:09
bazhangLuke23ae, 1.98?17:09
Sysaxedwhat is the easiest way to detect mouse click in bash? in any window17:09
jwtiyarwilee-nilee, i think i added the restructed area but not required codecs17:09
Sysaxedpero_p: try tail17:09
bazhangpero_p, ask in #bash17:09
bazhangLuke23ae, what version of ubuntu are you on17:10
pero_pSysaxed, you people are awesome :)17:10
Luke23aebazhang: 8 something17:10
bazhangLuke23ae, that sounds like its not supported17:11
bazhang!version | Luke23ae17:11
ubottuLuke23ae: To find out what version of Ubuntu you have, type « lsb_release -a » in a !shell - To know the available version of a package, « apt-cache policy <package> »17:11
alesanhi; can I encrypt a home directory if I already have a user? 13.04 64 bits17:11
Ab3Lbazhang: but wondershaper limits the bandwidth of an interface. i'd like something that limits band only for a process (not for all processes using an interface)17:11
bazhang!info trickle17:11
ubottutrickle (source: trickle): user-space bandwidth shaper. In component universe, is optional. Version 1.07-9build1 (raring), package size 42 kB, installed size 180 kB17:11
bazhangAb3L, ^17:12
Azraelbosshow's it going?17:12
bazhangLuke23ae, tell us the exact version pleaes17:13
jalalhey guys..need help17:13
Poss-mobTo restate my problem simply: i have updated my graphics driver and now have no gui.17:13
jwtiyarbazhang, can u show me which codecs are required?17:13
Luke23aebazhang: 8.1017:13
jalalI am trying to install openvas5 but i am getting error "openvas manager databse is too low"17:13
bazhangjwtiyar, ubuntu-restricted-extras17:13
bazhangLuke23ae, thats not supported, time to upgrade17:13
bazhang!eolupgrades | Luke23ae17:13
ubottuLuke23ae: End-Of-Life is the time when security updates and support for an Ubuntu release stop, see https://wiki.ubuntu.com/Releases for more information. Looking to upgrade from an EOL release? See https://help.ubuntu.com/community/EOLUpgrades17:13
jwtiyarbazhang, i know this , but i mean needed codecs17:14
FatDarrelhello is there a kickstart for ubuntu17:14
MKCoinOk, that didn't work. I am set as the owner of these files and it says I have access to Create and Delete files, but cut/copy/rename/etc are still greyed out i nautilus. Any ideas?17:14
jalalSomebody help me..i am getting error in opvenvas setup..openvas manager databse is too low17:14
bazhangjwtiyar, you have not said what you are trying to do17:14
Ab3Lbazhang: thank you.17:14
SysaxedFatDarrel: what does it mean?17:14
jwtiyarbazhang, already i have restricted area installed'17:14
bazhang!repeat | jalal17:14
ubottujalal: Don't feel ignored and repeat your question quickly; if nobody knows your answer, nobody will answer you. While you wait, try searching https://help.ubuntu.com or http://ubuntuforums.org or http://askubuntu.com/17:14
BluesKajjwtiyar, open a console , sudo apt-get install ubuntu-restricted-extras , the codecs you need will install17:15
jwtiyarbazhang, i said when i put dvd/cd in writer nothing happen17:15
mzazabazhang: Do you use 1 partition for the Ubunut installation, or custom partitions?17:15
MKCoinHm, I have tried Thunar and the restrictions are not there, it appears to be a Nautilus issue.17:15
FatDarrelSysaxed: Have you used kickstart? It is a scripted install of a RHEL based os I was wondering if unbutnu had one.17:15
jalal@ubottu i am installing openvas in ubuntu and i am getting error "openvas database is too low"17:15
bazhangmzaza, what do you mean one17:15
mzazabazhang: Your partition layout?17:16
Luke23aebazhang: I have already installed 12.04, but my display won't switch on while booting. and because the old ubuntu is booted via GRUB I'm trying to set it up so it will boot into the new ubuntu and then delete the old one from my new one. messed up, i know17:16
bazhangjalal, dont repeat so quickly...17:16
jwtiyarBluesKaj, thank you before was installed'17:16
bazhangmzaza, swap / and /home17:16
SysaxedFatDarrel: oh. Sorry, I don't know17:16
intrinwhats the quickest way to find out what # perms this is ( drw-rwxrwx )17:17
bazhang!permissions | intrin17:17
ubottuintrin: An explanation of what file permissions are and how they can be manipulated can be found at https://help.ubuntu.com/community/FilePermissions17:17
jalal@intrin what u mean? what u want to do exacty?17:17
mzazabazhang: When I used seperate partition for home, I had a problem. When I used to remove the / and reinstall another Ubuntu version I used to get lots of errors. Do you experience the same?17:17
FatDarrelyo! anyone here know how to do a scripted install?17:17
intrini want it to be displayed as green in ls -la instead of blue17:17
bazhangmzaza, no17:17
bekksFatDarrel: https://help.ubuntu.com/lts/installation-guide/i386/automatic-install.html17:18
wilee-nileejalal, Use the tab button to complete nicks @ does not inform the other user like you see this message in red.17:18
mzazabazhang: Do you delete old config files before installation of new OS?17:18
jalalwilee-nilee: ok dude17:18
bazhangmzaza, your issue seems to be related to small amount of ram, or video driver/card issue; how much ram, which video card, and which driver, and how did you install that video driver17:19
=== Aaron is now known as Guest95758
=== Guest95758 is now known as Aaron
zyngawowI'm running tomcat with a Java applet in it, and I set it up to write to ~/. Where is that folder if I run it with service tomcat7 start?17:20
BluesKajjwtiyar, restricted-extras ? maybe you should check again17:20
mzazabazhang: I have 4GB of RAM and hybrid graphics on core i5 processor. This problem didn't happen with any Ubuntu version pirior to 13.0417:21
bazhangmzaza, which driver, and how installed17:21
jwtiyarBluesKaj, yes was installed the output said already installed restricted area17:21
mzazabazhang: I don't use the dedicated graphics, no need for it, i use the built in which is automatically installed the intel17:22
mojtabaHi,  I have ubuntu 12.10, and want to know what precautions should I take if I want to upgrade to 13.04?17:22
wilee-nileemojtaba, Have a backup.17:22
mojtabawilee-nilee: How can I backup?17:22
mojtaba:-P I am a newbie.17:23
zyngawowI'm running tomcat with a Java applet in it, and I set it up to write to ~/. Where is that folder if I run it with service tomcat7 start?17:23
wilee-nileemojtaba, You can backup what you can't afford to lose, you can go as far as cloning the OS.17:23
wilee-nileeon a external would be my preference17:23
mojtabaIs there any tool for this purpose? I have no experience.17:23
ubottuThere are many ways to back your system up. Here's a few: https://help.ubuntu.com/community/BackupYourSystem , https://help.ubuntu.com/community/DuplicityBackupHowto , https://wiki.ubuntu.com/HomeUserBackup , https://help.ubuntu.com/community/MondoMindi - See also !sbackup and !cloning17:24
ubottusbackup is a tool to create complete and/or incremental backups (which can be scheduled to be automatic, and can be done over a network). It is available in !Universe17:24
ubottuTo replicate your packages selection on another machine (or restore it if re-installing), you can type « aptitude  --display-format '%p' search '?installed!?automatic' > ~/my-packages », move the file "my-packages" to the other machine, and there type « sudo xargs aptitude --schedule-only install < my-packages ; sudo aptitude install » (this may cause problems with multiarch before 12.10) - See also !automate17:25
wilee-nileemojtaba, Good area to have some knowledge in it will cover you in any possibilities and get you back in the game.17:25
ses1984i'm trying to do an ubuntu net install, and i get to the screen where i select a mirror, choose whatever mirror i want, then it just shows me a blank purple screen and stops17:25
BluesKajjwtiyar,  is it just codecs you need for a particular media file , is your cdrom is not recognized in the system?17:25
mojtabawilee-nilee: Thank you very much17:25
wilee-nileemojtaba, No problem, good luck. ;)]17:26
jwtiyarBluesKaj, yes it recognize but when putting dvd or cd and then nothing happen and not mounting17:26
BluesKajjwtiyar, what about media files already stored on your system?17:27
jwtiyarBluesKaj, i dont undrstand sorry17:28
BluesKajjwtiyar, do media files play,  like avi or mp3s that you have on your hard drive17:29
whamptonI have an sftp question on Ubuntu 12.04:  sftp always fails with error subsystem request failed on channel 017:29
mzazaWhat is more recommended having seperate partitions for / /home swap and /boot or having one partition for them all as Ubuntu does by default?17:29
jwtiyarBluesKaj, yes yes its just not reading any dvd/cd17:29
whamptonmzaza for servers I like separate partitions, one is fine for workstations/desktops17:30
BluesKajjwtiyar, sudo mount /dev/cdrom , in the console17:30
wilee-nileemzaza, Depends, some like a seperate home so that upgrading the distro uses the orignal home.17:30
blacklightquite urgent question...i forcely rebooted my laptop (ubuntu 13.04, upgraded to it two days ago) after a weird kernel panic...since then, the maximum resolution allowed on my screen is 1024x768, although higher resolutions were allowed before17:30
whamptonyes- separate home is very good and recommended17:30
albttashiBlackLight -> whats problem now ?17:31
blacklightalbttashi: maximum allowed resolution: 1024x76817:31
g3org3s_hey all, how can i remove the left menu bar from ubuntu .?17:31
jwtiyarBluesKaj, http://paste.ubuntu.com/5619809/17:31
wilee-nileeg3kk3r, By changing the desktop.17:31
blacklightg3org3s_: install ccsm and remove it from the unity plugin17:31
wilee-nileeblacklight, Not true.17:32
blacklightwilee-nilee: ccsm -> desktop -> ubuntu unity plugin -> launcher -> hide launcher17:33
wilee-nileeblacklight, Hide is not remove.17:33
BluesKajjwtiyar, the dvd that won't read is it a rental or a purchased dvd ?17:34
albttashiblacklight : may you does n't  install graphic driver ?17:34
jwtiyarBluesKaj, purchased17:34
blacklightalbttashi: it worked fine until i rebooted, thus the drivers were installed17:34
blacklightwhat i see from dmesg, that worries me now, is this:17:35
blacklight[   17.732791] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.P0P2.VGA_.GPIO 2 (20121018/utaddress-251)17:35
blacklight[   17.732800] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver17:35
adamk_blacklight, pastebin your /var/log/Xorg.0.log file.17:35
blacklightit looks like a conflict that was not there before17:35
albttashimay be some thing happen in  upgrading ?17:35
blacklightadamk_: http://sprunge.us/gVOi17:36
BluesKajjwtiyar, aha , you don't have the libdvdcss2 file installed , it ignores DRM and regional coding for commercial dvds17:36
wilee-nileeg3org3s_, The left panel is coded into the desktop, however yo can hide it as suggested, there are other desktops you can run if you like17:36
jwtiyarBluesKaj, how i can install it?17:36
ubottuUbuntu's default installation and repositories do not include packages needed to play commercial DVDs for legal reasons. For information on adding them, see https://help.ubuntu.com/community/RestrictedFormats/PlayingDVDs | For information on the legalities involved, see the "DVD" section of https://help.ubuntu.com/community/FreeFormats17:36
albttashiguys I wanna start programming on ubuntu How I can start ?17:37
g3org3s_wilee-nilee,  thanks17:37
adamk_blacklight, KMS is disabled, so nouveau can't work.  It's falling back to the vesa driver.  Pastebin the full output of 'dmesg'17:37
whamptonI have a problem with sftp on Ubuntu 12.04 (ssh works fine).  I try to sftp to a test account and keep getting subsystem request failed on channel 017:37
BluesKaj!medibuntu | jwtiyar17:37
ubottujwtiyar: medibuntu is a repository of packages that cannot be included into the Ubuntu distribution for legal reasons - See http://www.medibuntu.org17:37
blacklightadamk_: http://sprunge.us/fBDX17:38
Avatar_hi all17:38
albttashihi avatar17:38
whamptonhi avatar17:38
Avatar_is someone here have great knowledge on networking?17:38
Poss-mobRebooted into previous kernel, downloaded alternate driver versions, ill now try them one by one.17:39
jwtiyarBluesKaj, libdvdread4 is already installed17:39
bazhangAvatar_, try ##networking17:39
Avatar_bazhang, ok thanks.17:40
g3org3s_can i put the unity plugin down .? instead of left ?17:40
blacklightadamk_: any hint..? sorry for chasing but i can barely work in such conditions :(17:41
adamk_blacklight, Well, you have a kernel panic from your sound drivers.  I have no idea if that's related or not...  I'm not seeing any output from the nouveau kernel driver, which is strange.17:41
ganimedehi all. i am using ubuntu 13.04 and would like to know if it possible to support multitouch on an acer t231h17:41
adamk_blacklight, Do you have an older kernel installed that you can try?17:41
wilee-nileeg3org3s_, Nah it is stuck on the left.17:41
Avatar_anyone know how to execute a script from a server to install prgrams to all of the pc's in a network?17:41
g3org3s_wilee-nilee,  thats unfortunate :p17:41
=== samuel__ is now known as samuel
wilee-nileeg3org3s_, You can shrink it.17:41
albttashiwelcome all17:42
ganimedeg3org3s_, the unity rotate plug-in of compiz is not supported anymore. pity, I liked it17:42
BluesKajjwtiyar, try installing libdvdcss217:42
albttashiavatar this may be open stack17:42
blacklightadamk_: the older kernels of 12.1017:42
blacklighti don't know whether they're bootable yet17:42
jwtiyarBluesKaj, its also newest version17:43
whamptonAvatar_, clusterit is great and supports dsh which can be setup to SSH to a group of computers to run commands or install packages17:43
adamk_blacklight, Not sure, but it probably can't hurt to try.  This looks to me like some kernel bug.17:43
adamk_blacklight, One other thing you could try...  pass 'vga=normal' to the kernel when booting via grub.17:43
Avatar_whampton, at the same time??17:43
blacklightadamk_: ok i'll try with vga normal and be back asap...thanks for the support so far17:44
BluesKajjw then you must a new dvd for which linux hasn't found a workaround yet. :(17:44
g3org3s_ganimede, is compiz fusion and all that cube n 3d stuff still supported ,17:44
BluesKajjwtiyar, new DRM encryption /wrapper17:45
Avatar_whampton, you mean clustering right?17:45
ganimedeyes, i use several of these effects. but unity rotate is gone. also, you need a gpu acceleration17:45
jwtiyarBluesKaj, pardon?17:45
BluesKajjwtiyar, do all your dvds behave the same , they won't play ?17:46
mzazaIf I use one partition as Ubuntu recommends during installation while I lose my data if I upgrade one day?17:46
whamptonAvatar_, I use the tool Clusterit:  http://www.garbled.net/clusterit.html  -- runs commands in parallel17:46
jwtiyarBluesKaj, i tried two17:46
whamptonAvatar_, it can run a block of commands on MANY hosts at once17:46
wilee-nileemzaza, YOU could lose all your data at any time, always have backups. A overwrite of a partition will remove data.17:47
Avatar_whampton, oh. beginning to like this17:47
BluesKajjwtiyar, well, I'm out of ideas , ubuntu-restricted-extras and the medibuntu codec apps should work on 99% of commercial dvds.17:48
uponatreehey guys, we've got some issues with grub on a software raid 5 after we added new disks, it says "no such disk" and enteres rescue shell. All partitions are on the raid 5. How can I recover grub? I can boot the os via super grub disk. Any ideas?17:48
whamptonsetup ssh keys to your group of hosts as root, setup the list for Clusterit, it works great17:48
Avatar_whampton, do you have an idea on how to like shutdown all the computers in a network on a certain time and boot it up on a certain time too?17:48
mzazawilee-nilee: Does system upgrade requires overwrite of partition?17:48
jwtiyarBluesKaj, ok i just restart the pc17:48
jwtiyarBluesKaj, thank you very much17:49
=== JoFo is now known as Guest45414
viranHey, how do i boot a machine into single mode? i'd like to reset root's password17:50
blacklightadamk_: vga=normal did the trick17:50
wilee-nileemzaza, Depends on how you upgrade, honestly your questions here are rather vague, you might start a thread at the ubuntu forums asking on upgrades and preserving your stuff. There are handfuls of ways to do this.17:50
blacklightanyway i'm wondering why this happened17:50
Jordan_Uuponatree: "sudo dpkg-reconfigure grub-pc" and make sure that when prompted you configure it to install grub's boot sector to the MBR of each disk in the array (and if the BIOS might ever decide to boot any other disks, them too).17:50
mzazawilee-nilee: OK, I guess I'll go with repartition my system. Thanks.17:51
blacklightfor now i can boot my kernel with vga=normal as well, but it sounds like a dirty patch17:51
uponatree:Jordan_U I'll try17:51
Jordan_Uviran: Ubuntu doens't have a root password set by default, and highly recommmends against setting one. Why do you want to "reset" the root password?17:51
plshelphi, could you help me pls....I accidentally dropped a glass on my notebook....now the harddisc seems to be broken....is there a possibility it is cauesed by software?17:52
=== JoFo_ is now known as Guest42807
Avatar_anyone know how to shutdown and boot up ubuntu pc using bash script?17:53
plshelpdisc won17:53
blacklightAvatar_: sudo reboot17:53
adamk_plshelp, You already seem to have identified the cause...  I'm not sure how dropping a glass on you laptop could be considered a software problem :-)17:53
bazhangplshelp, try ##hardware17:53
Jordan_Uplshelp: It's not likely.17:53
adamk_blacklight, Cool.  I definitely recommend reporting this bug.17:53
viranJordan_U: I have a local VM machine with ubuntu, i have access to a regular user but not for super user. i'd like to make that user into a superuser, how would you do that?17:54
whamptonAvatar_  shutdown could be done using Clusterit (dsh -g myservers /sbin/shutdown -h now), startup would require something else17:54
adamk_blacklight, There is some conflict between the vesafb driver and the nouveau driver.  The handoff from vesafb to nouveaudrmfb should be smooth.17:54
bazhangviran, sudo17:54
Avatar_i mean bash script. i want to automate shutdown and boot up on a certain time17:54
whamptonAvatar_ smart PDU or similar or programming the CMOS to reboot17:54
blacklightAvatar_: in order to automate it at a certain time, you can always place /sbin/reboot in your crontab, maybe with chmod a+s on it17:55
Avatar_blacklight, how to do that??17:55
Poss-mobPlshelp - turn off the computer immediately, pull out the bits you can and throw wet bits into a dessicant.17:55
Poss-mobWait till everything is dry before plugging anything in, let alone turning it on.17:56
plshelpyes I know....but how many times I kicked my old computer when he bas not doing what I wanted....it went black but restart fixed it....I thought if it is not possible my harddisc just fainted17:56
plshelpthere was no water in it17:56
plshelpi forgot to say that17:56
blacklightAvatar_: crontab -e, man crontab for checking the format of the crontab file, then place /sbin/reboot at the specified time in your crontab. in order to execute reboot you need either: 1. to be root 2. to be allowed to run it through sudo 3. to have the reboot executable with the stick bit on (sudo chmod a+s /sbin/reboot)17:57
plshelpthe glass just hit the case and it went black17:57
BluesKajprobly jarred the readers on the hdd17:57
bazhangplshelp, thats hardware    ##hardware for assistance17:57
Avatar_is there some here good at networking?? ##networking no one qnswers17:57
blacklightAvatar_: what's the issue? (it may be OT anyway)17:58
acoleman1981i'm good at networking, what's the issue17:58
plshelpbut system still see it...17:58
viranbazhang: i cant sudo, im not in that group17:58
acoleman1981private message me17:58
bazhangacoleman1981, no PM ask here17:58
blacklightplshelp: it is a software issue anyway, please open a ticket named "ubuntu causes glasses to smash on computers"17:58
Ip`CopHi all, who know how to fix this: when i try to install wireless drive i got: "WARNING: Symbol version dump ... is missing; modules will have no dependencies "17:59
Avatar_my server rebooted and now i have an IP conflict issue...i have 5 switches and now the PC's cant connect to the network17:59
BluesKajacoleman1981, it would be good if you shared your exopertise so we can all benefit , rather than a pm , but that's up to you .17:59
adamk_plshelp, Define broken...  Does Ubuntu not boot up?  What errors do you get?17:59
Freakishcan someone help me out with pulseaudio? im running a pbx in virtualbox and when i make calls the person complains that what they say echos back to them18:00
ses1984i'm trying to do an ubuntu net install, and i get to the screen where i select a mirror, choose whatever mirror i want, then it just shows me a blank purple screen and stops18:00
uponatree:Jordan_U That worked fine, thank you!18:00
wilee-nileeses1984, A net install is a text install, where did you get the disc?18:01
plshelpwhen it hit the case, it went black...and now I can load the system(live cd), but when I try to access my disc, it says....unable to mount 496 GB Filesystem18:01
adamk_plshelp, Check the output of 'dmesg' to see what errors are generated when you try accessing the disc.18:02
plshelphuh....I lot of information....what should I search for?18:03
Freakishfixed it, disabled sound in virtualbox and now works like a charm18:03
adamk_Anything related to the hard drive, which is probably device sda.  If you're not sure what you're looking at, pastebin the full output of 'dmesg'.18:03
=== jhirley_ is now known as jhirley
BaribalHi. Is wine still the go-to app to run Windows binaries?18:05
user82anyone else got short desktop freezes on unity minimize/maximize animation with ATI?18:06
user82it can take for like 1-2seconds in a bad case and is the case quite often for me18:06
Ip`Copanyone knows how to fix error msg "WARNING: Symbol version dump ... is missing; modules will have no dependencies "18:07
wilee-nileeBaribal, Depends, there is playon linux as well, I assume you understand the limitations overall.18:07
plshelpwhere should I paste it?18:07
=== JoFo is now known as Guest84459
plshelplast lines18:08
plshelp[  366.319337] JBD2: Failed to read block at offset 677918:08
plshelp[  366.375018] JBD2: recovery failed18:08
Baribalwilee-nilee, not really. I've got a basic understanding how wine works, and that's it.18:08
plshelp  366.375029] EXT4-fs (sda1): error loading journal18:08
esingBaribal, You can also run them seamlessly in virtualbox  if you have a windows key ( and if you have an SSD, that's pretty neat). The advantage is that you can run all windows binaries and your system would be imho a little more secure in comparision to wine)18:08
=== JoFo__ is now known as Guest56970
sdglsdgkjgdaMy touchpad left click stops working after a while on my laptop, and is only fixed by a reboot. What could be going on?18:10
lenimPoss-mob: you fix it.18:11
esingBaribal,  If you run a harmful windows binary in virtualbox, then only your virtual windows system would be harmed, though if you'd run a harmful widows binary in wine, your linux system has a higher risk to get attacked. It should also be possible to break out of the virtualbox, but as I heared that is unlikely to happen, since a program needed to be written very bad, giving an explot a chance to break out of virtualbox18:13
wilee-nilee!wine > Baribal18:13
ubottuBaribal, please see my private message18:13
wilee-nileeBaribal, Not sure if that link is helpful, let us know.18:13
plshelpIs it possible ubuntu can't load my disc due to software after a hit to the case? It sais it is not mounted....help pls :]18:14
lenimBaribal: no way homey18:14
lenimesing: it can not.18:15
bazhang!behelpful | lenim18:15
ubottulenim: As our !guidelines say, "When helping, be helpful". If you're not familiar with the issue at hand, let someone else handle it instead of making !offtopic comments or jokes.18:15
Baribalesing, I'll try wine then, I just want to play Papers, Please. :)18:15
Poss-mobI  fixed it!!!!18:16
=== onr_ is now known as onr
MrPinkanyone care to help me set up ssh from my xubuntu machine to my ubuntu machine via rsa passkey?18:19
MrPinki cant get it to work publickey keeps failing after usb transfer18:19
h00kMrPink: you can try ssh-copy-id user@destinationserver18:19
h00kMrPink: that will automatically take the pubkey and copy it where it needs to go on the destination server you specify18:20
h00kubottu: ssh | MrPink This may also be of use18:20
ubottuMrPink This may also be of use: SSH is the Secure SHell protocol, see: https://help.ubuntu.com/community/SSH for client usage. PuTTY is an SSH client for Windows; see: http://www.chiark.greenend.org.uk/~sgtatham/putty/ for it's homepage. See also !scp (Secure CoPy) and !sshd (Secure SHell Daemon)18:20
ubottunetsplit is when two IRC servers of the same network (like freenode) disconnect from each other, so users on one server stop seeing users on the other. If this is happening now, just relax and enjoy the show. See http://en.wikipedia.org/wiki/Netsplit18:21
=== jaequery_ is now known as jaequery
kubotsui has SHOW nau!!  0.o18:21
Dr_DracheI have an issue with my LTS workstation with nvidia GFX card, after typing my password and trying to login, i get thrown back to lightDM18:21
Dr_Dracheanyone able to give me a hand with this?18:22
MrPinkh00k: Thank you how do i specify a port with that command/18:22
Poss-mobThe moral of the story is, update your drivers through the manager, not from the nvidia site!18:23
MrPinkh00k: Thank you how do i specify a port with that command?18:23
Dr_Drachethat doesn't help18:23
kubotsuMrPink: h00k sort of implied that the command would send the key where it needs to go, automagically18:23
kubotsugive it a try18:23
plshelphi...ubuntu cant mount my disc...could you give me any advice?18:24
Ryp-Ryd3rand then what do I do?18:24
h00kMrPink: you can do:  ssh-copy-id '-p XXXX username@servergoeshere'18:24
h00kMrPink: those single quotes should do it ^18:24
yashhhello guys18:24
bazhangplshelp, the computer that something heavy dropped on?18:24
plshelpyes ._.18:25
h00kkubotsu: it will, but only over the default port, above will let you specify another18:25
MrPinkh00k:Thank you18:25
Dr_Dracheanyone else able to help me, this is driving me totally bonkers18:25
kubotsui see18:25
bazhangplshelp, thats hardware, try ##hardware for support18:25
wilee-nilee!patience > Dr_Drache18:25
ubottuDr_Drache, please see my private message18:25
=== muhammad is now known as Guest88779
Guest88779wht is better ubuntu 12.10 or ubuntu studio18:25
wilee-nilee!details > Dr_Drache18:25
h00k!best | Guest8877918:26
ubottuGuest88779: Usually, there is no single "best" application to perform a given task. It's up to you to choose, depending on your preferences, features you require, and other factors. Do NOT take polls in the channel. If you insist on getting people's opinions, ask BestBot in #ubuntu-bots.18:26
Dr_Drachewell, i thought i described it well18:26
bazhangGuest88779, thats totally opinion, please dont poll. decide for yourself18:26
SolarisBoyto use a special port in ssh-copy-id i would think you need to use ~.ssh/config18:26
yashhi am using ubuntu 12.04, I cannot autohide my launcher,help pls??18:26
=== irenicus09 is now known as Guest46672
hlrossatoProgramo em Django e estou tendo problemas com thumbnail no ubuntu 12.10... alguém poderia me ajudar?18:26
SolarisBoyor that the ssh-copy-id commands interprets the ssh -o args and passes them back18:26
plshelp#hardware for support18:26
Ryp-Ryd3rAnybody ever use the Gentoo or Sabayon Linux distrobution?18:26
bazhanghlrossato, english here please18:26
bazhangRyp-Ryd3r, sure, but thats way offtopic here18:27
wilee-nilee!es > hiro18:27
Dr_DracheI have an issue with my LTS workstation (11.10, then updated to 12.04) with nvidia GFX card (GF300) , after typing my password and trying to login, i get thrown back to lightDM, lightdm logs state that screen cannot be found, OR device cannot be found18:27
ubottuEn la mayoría de los canales de Ubuntu, se habla sólo en inglés. Si busca ayuda en español entre al canal #ubuntu-es; escriba "/join #ubuntu-es" (sin comillas) y presione intro.18:27
Dr_DracheKernel logs state that the driver is wrong18:27
marina__what is a better choice android or ios?18:27
Guest88779i failed to write ubuntu 12.10 in a dvd. wht speed i will write ubuntu????18:27
bazhangmarina__, thats not even remotely related to ubuntu support18:27
wilee-nileeGuest88779, Generally the slowest.18:28
hlrossatoi'm a django programmer and I have had some problems with thumbnail on ubuntu 12.04...someone can help me?18:28
marina__when is the ubuntu mobile phone coming out?18:28
Dr_DracheI have tried xorg.conf delete, purge the nvidia*, as well as going back to nourava (spelling)18:28
auronandace!phone | marina__18:28
bazhang!touch | marina__18:28
wilee-nileemarina__, #ubuntu-touch18:28
ubottumarina__: Information about the Ubuntu Touch platform for Phone and Tablet is available here https://wiki.ubuntu.com/Touch support and discussion in #ubuntu-touch18:28
Guest88779i tried it but it says it don works plz tell me specific speed so that i can write>...18:29
bazhangGuest88779, 4x18:29
arianithi, I upgraded Gnome in Ubuntu 13.04 to Gnome 3.8 and removed it. now Ubuntu is not one of the options in lightdm. I think there is nothing wrong with Unity, just that it is not showing up in lightdm. any clue?18:29
wilee-nileeGuest88779, What app are you using to image the dvd?18:29
bazhangarianit, the PPA?18:29
Guest88779magic iso18:29
yashhhow do i get ubuntu 13.04 ??18:29
mattb'w 1918:30
bazhang!torrents | yashh18:30
ubottuyashh: Raring can be torrented from http://torrent.ubuntu.com/simple/raring/desktop/ubuntu-13.04-desktop-i386.iso.torrent or http://torrent.ubuntu.com/simple/raring/server/ubuntu-13.04-server-amd64.iso.torrent depending on your needs. Other flavors can be found at http://torrent.ubuntu.com:696918:30
bionextype in terminal sudo do-release-upgrade -d18:30
bazhangbionex, thats not correct18:30
Dr_Drachealso attempted to dpkg-reconfigure18:30
Dr_Drachenothing seems to change a thing18:30
Guest88779i write ubuntu 12.10 in 4x speed but when i going to boot it says somethin is wrong about my hard disk and it may occur due to speed what i will do???18:31
wilee-nileeGuest88779, Imgburn would be my choice in windows, if there is no stock app. http://www.imgburn.com/18:32
tgm4883bionex, -d is only needed to update to the development release.18:32
Guest88779ok which speed i will burn???18:32
kubotsuyashh: systemsettings > appereance > behavior     it has the option to hide the launcher bar18:32
wilee-nileeGuest88779, Have you checked the sum of the ISO, and is there any problems with the HD?18:32
bazhangGuest88779, md5 the iso first18:32
Dr_Drachethe kernel say's it's loading kernel version 295.20 (nvidia module) but yet nvidia-current is 3xx.18:33
marina__how to i learn to use terminal?18:33
arianitbazhang, yes18:33
Guest88779i am now using ubuntu studio18:34
wilee-nileemarina__, Here is a wiki with lots of links. https://help.ubuntu.com/community/UsingTheTerminal18:34
sdglsdgkjgdaMy touchpad left click stops working after a while on my laptop, and is only fixed by a reboot. What could be going on?18:35
Guest88779i used ubuntu 12.10 studio but nothing seemed rong. but i can not install ubuntu 12.10 why???? i dont think my harddisk is faulity18:35
=== gp is now known as Guest20263
wilee-nilee!md5sum > Guest8877918:36
ubottuGuest88779, please see my private message18:36
kubotsuGuest88779: you have a bad disk. make new18:36
=== Trystam is now known as Tristam
yashhhow to perform c program in ubuntu18:37
jaimefhow does one disable compiz in 13?18:39
Aaron_yashh, try anjuta18:40
naturalhi ubuntu, i am wondering how to update through the terminal, i want to perform the same update that the software updater performs, but through the terminal.  any help?18:40
Aaron_natural, sudo apt-get upate && sudo apt-get dist-upgrade18:40
Aaron_and also natural man apt18:40
=== Aaron_ is now known as Aaron
Ennomnatural: sudo apt-get dist-upgrade18:41
naturalthanks Aaron but why do i need to hit distr upgrade?18:41
arianithow do I edit what what options appears on LightDM?18:41
yashhhow many months does ubuntu 13.04 last??18:41
naturali heard it was going for 9 months18:42
yashhso when will the complete version released?18:43
tgm4883yashh, what do you mean?18:43
wilee-nileeyashh,  1818:43
naturalyou mean long term support?18:43
jelly-homeyashh: https://wiki.ubuntu.com/Releases18:43
tgm4883wilee-nilee, 13.04 is supported for 9 months18:43
naturalhm... i dont know if there will be one on the 13's  i heard it will be 14.0418:43
tgm488314.04 is the next LTS18:43
naturalthere you go18:43
yashhso, 13.04 will be LTS???18:44
tgm4883yashh, no18:44
natural14.04 is lts18:44
yashho h  ok18:44
natural13.04 is 9 months18:45
riddribWhere can find programmer to helping !18:45
yashhthanks guys18:45
naturalriddrib, try #programming18:45
savioriddrib try programming channel18:45
riddribthank you18:45
kubotsuno matter, EVERy release IS a complete release18:45
naturalyore welcome yashh and riddrib18:45
savioLike ##c18:45
savioFor c lang help18:45
Dr_Drache! !blah18:46
kubotsuexcept for the updates that is.. but so what18:46
yashhwhat do ya guys think about zorin OS  ???18:46
ubottu#ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics (though our !guidelines apply there too). Thanks!18:46
savioyashh !offtopic18:46
yashhooo k18:46
=== JoFo_ is now known as JoFo
Learninggany1 got a vps i could use ?18:47
naturalvps? does he mean vpn?18:47
naturalwhats a vps?18:48
zerickHi everybody, what is the latest recommended version of Ubuntu in which work with corosync, pacemaker, drbd or heartbeat?18:48
Dr_Dracheso, no one has a clue, damn looks like a format is in my near furture18:48
tgm4883natural, virtual private server18:48
naturaloh, thanks tgm488318:48
dylanDr_Drache: What's your problem?18:48
EnnomDr_Drache: what's the problem?18:48
Dr_DracheI have an issue with my LTS workstation (11.10, then updated to 12.04) with nvidia GFX card (GF300) , after typing my password and trying to login, i get thrown back to lightDM, lightdm logs state that screen cannot be found, OR device cannot be found18:49
Dr_DracheKernel logs state that the driver is wrong18:49
=== eac_ is now known as eac_linux
Dr_DracheI have tried xorg.conf delete, purge the nvidia*, as well as going back to nourava (spelling)18:49
=== eac_linux is now known as eac`linux
yashhhow to download ubuntu for tablets????18:50
=== TaiChi is now known as Guest98694
tgm4883!touch | yashh18:50
ubottuyashh: Information about the Ubuntu Touch platform for Phone and Tablet is available here https://wiki.ubuntu.com/Touch support and discussion in #ubuntu-touch18:50
Dr_Dracheonly thing that changed, was i attempted to use a 2nd monitor18:50
kubotsuis it still connected?18:51
naturalDr_Drache, did you try #hardware ? they help with that kind of stuff too, but i am not sure wwaht the prob is, they helped me alot though.18:51
kubotsucan you log in with the second monitor in?18:51
Dr_Drachekubotsu, i can try real quick18:51
wilee-nileeDr_Drache, With a upgrade it may be more then a graphic problem, try a live cd/usb of 12.04.18:51
Dr_Drachewilee-nilee, i tried the upgrade after the issue arose18:52
dylanc/WIN 318:52
=== TaiChi_ is now known as Guest93684
=== jnr is now known as Guest59961
wilee-nileeDr_Drache, That was a bad idea, upgrades don't just magically fix things.18:52
yashhmy tab aint supported for touch (18:52
Dr_Drachewilee-nilee, i know it was, that was a mistake18:52
EnnomDr_Drache: did u use xrandr to change the monitor setups? had a similar issue and had to reinstall all18:52
Dr_DracheEnnom, only attempted nvidia-settings18:53
wilee-nileeDr_Drache, If it were me I would of  had it backed up and fresh installed by now, but I don't like wasting time. ;)18:53
EnnomDr_Drache: can't agree more with wilee-nilee :)18:54
kubotsuit would only take half hour really..18:54
=== OS-10635 is now known as ghyths
_WolfeZ_how can i login as root user?18:55
kubotsuthe base system that is .. then there is the chunk of updates to follow but , just saying18:55
tgm4883!noroot | _WolfeZ_18:55
ubottu_WolfeZ_: We do not support setting a root password. You're free to do it on your own machine, but please don't offer instructions on how to set a root password or ask for help with setting it. See !root and !wfm for more information.18:55
Baribal_WolfeZ_, sudo su18:55
bazhangBaribal, thats not right18:55
elisa87I installed a tool (and I though it already installed the crosstool ) but after installation I received this message: For auto-completion, do not forget to install 'ct-ng.comp' into your bash completion directory (usually /etc/bash_completion.d) . Do you know what I should exactly do? Should I download and configure install crosstool-ng on my own again?18:55
www2_WolfeZ_ or sudo -s18:55
yashhhow to use backspace to go to previous page in any browser?18:55
Baribalbazhang, Works for me. What's not right about it?18:56
_WolfeZ_www2:  no i want to login not in the terminal!18:56
bazhangBaribal, a root shell is sudo -i18:56
BaribalI guess there are lots of ways to skin the rootlessness. :)18:56
Dr_Drachewhen i use a 2nd monitor18:56
bazhangBaribal, not the ubuntu way there s not18:57
dylanI think he may mean login to the GUI as root18:57
Dr_Dracheit comes back and switches which monitor is #118:57
bazhangthere is no root account enabled, so use sudo -i Baribal18:57
www2@_WolfeZ_ sudo su and sudo -s are almost the same18:57
dylanBaribal: What are you trying to do?18:57
Dr_DracheEnnom, wilee-nilee, no change with 2nd monitor18:58
lmatWhere would be the best place to invest in free software?18:58
marinhello, Im having some trouble with roostock, the error Im getting is : "./rootstock: 1000: ./rootstock: cannot create /tmp/tmp.C7sAyhcAxf/tmpmount/etc/fstab: Directory nonexistent" , Ubuntu 13.0418:58
lmatIf I'm looking to dig into something a bit and contribute, should it be Wine, Ubuntu? Linux? GNU?18:58
tgm4883lmat, contribute to something you use (and that you are interested in)18:58
lmattgm4883: There's too much!18:59
tgm4883lmat, doubt it. What do you use18:59
lmattgm4883: I'm interested in what I mentioned, but I'd like to know which one could use help the most...or something...18:59
wilee-nileeDr_Drache, I would not be able to help if the 11.10 was working before the upgrade, I would if I could. ;)18:59
lmattgm4883: irssi, vim, tmux, ubuntu, alpine, chromium, (linux of course), cairo-dock18:59
dylanlmat: irssi!18:59
tgm4883lmat, probably alpine or cairo-dock then19:00
lmattgm4883: And I'd like to be able to use Wine but it doesn't support Lync which is really my lynchpin right now.19:00
kubotsuin ubuntu, whenever you call on sudo you become root for the moment. so sudo is a way to become root on demand. thats all.19:00
lmattgm4883: How did you decide that? Although I would enjoy it, are they important?19:00
tgm4883those are the ones I haven't heard of19:00
lmattgm4883: I could also see myself working on drivers, etc. (It's on my mind right now because my mic doesn't work :-| )19:00
tgm4883lmat, it really depends on what you know I suppose19:01
lmattgm4883: Maybe I should ask the respective communities or get on their mailing list or something and decide for myself.19:01
dylanSorry, dropped something on keyboard19:01
tgm4883lmat, yea probably a good idea19:01
lmattgm4883: I was hoping to hear "Gnome is really hurting for a few developers" or something :)19:01
tgm4883lmat, Mythbuntu needs developers19:02
lmattgm4883: What the heck is that? ^_^19:02
tgm4883!mythbuntu | lmat19:02
ubottulmat: Mythbuntu is an Ubuntu derivative centered upon setting up a standalone MythTV system. See: http://www.mythbuntu.org for more information and #ubuntu-mythtv19:02
lmatha! I don't know what MythTV is, but I'm guessing I don't want to, either ^_^19:02
Baribaldylan, me? Nothing.19:03
=== jack is now known as Guest93665
tgm4883lmat, it's a PVR19:03
bazhang!ot | lmat19:03
ubottulmat: #ubuntu is the Ubuntu support channel, for all Ubuntu-related support questions. Please use #ubuntu-offtopic for other topics (though our !guidelines apply there too). Thanks!19:03
lmatubottu: Oh yes, thanks.19:03
ubottulmat: I am only a bot, please don't think I'm intelligent :)19:03
=== dgjones is now known as DJones
alex-s77Hi. I'd like to rebuild the kernel with one additional patch. At best, I'd like to end up with deb packages that I can install. How would I go about it?19:04
MonkeyDustalex-s77  #ubuntu-kernel19:05
alex-s77MonkeyDust: ok19:05
=== Guest46672 is now known as irenicus09
bsdbeardIs there a way to check if a directory belongs to a package? (installed with dpkg/apt)19:05
trismbsdbeard: dpkg -S19:08
bsdbeardtrism: Thanks, it seems to work :)19:10
=== CanadianPirate is now known as Incubus
=== Incubus is now known as CanadianPirate
JackSpratCurrently having a problem with Ubuntu 10.04 LTS, can anyone help?19:16
InfiniteByteIn LXDE, is there a way to have two monitors with seperate taskbars (so that the taskbar on one monitor only shows the windows that are on this monitor)?19:16
dylanJackSprat: This is the support channel, just ask19:16
sujithgood evening19:17
MonkeyDustJackSprat  10.04 is or will soon be !eol, consider upgrading19:17
dylansujith: Anything we can help with?19:17
=== syncsys_ is now known as Quest
JackSpratThanks, I restarted GNOME using sudo /etc/init.d gem restart. Now when I restart I get a blank desktop with no icons or menus nor a login (not sure if I should jump to the GNOME channel)19:18
JackSpratright click does nothing but I can jump to terminal using Ctrl+Alt+F119:18
dylanJackSprat: Do you have two monitors?19:19
JackSpratno but I can19:19
dylanNo, just curious19:19
JackSpratI can ssh into Ubuntu from my Mac though19:19
dylanThere is a piece of softare that people with 2 monitors will ocassionally use that causes that19:20
dylanforget the name...19:20
JackSpratIt even says that gdm is already running (which I guess it is) but I can't login in via the GUI19:20
InfiniteByteJackSprat, is there any way of logging in? Maybe from the Terminal, starting the xserver? Then logging out and back in again19:20
Kionhow do I creat a launcher for a script I have?19:20
KionI mean in unity19:21
dylanKion: Should be able to right click > create launcher19:21
=== sam9999 is now known as Sko33
Kiondylan: So just right click my executable file? and that is it??19:22
dylanOn the desktop19:22
dylanand click "create launcher"19:22
JackSpratHmm, dylan, what do you mean? When I Ctrl+Alt+F1 I get out to the command line and can login in as a user or root, but when I flip back to GNOME nothing has changed. So I can login and edit but not sure what to start.19:22
Kiondylan: Well I am trying to create a launcher for Blender 3D, the executable is in a directory other than my desktop19:23
JackSpratMy Apache is still even serving my website…so odd!19:24
ascorbicI'm trying to add a certificate (originally .cer, but I seemed to have successfully converted to .pem). How do I add it so it will apply to the whole system (i.e. not just Firefox)?19:25
dylanKion: unfortuneately I'm not at my desktop, so I can't remember it all of the top of my head19:25
InfiniteByteJackSprat, have you tried sudo restart gdm?19:26
JackSpratyes, it goes black and then goes back to the blank desktop19:26
Kiondylan: Thanks anyway!  Right clicked my executable and the create launcher option was not there19:26
dylanYou right click on the desktop19:26
dylannot on any files19:26
Kionohhh ok19:27
=== _BJFreeman is now known as BJFreeman
ebernhardsoni have a laptop(lenovo ideapad u310) where they decided to default the top row to "special keys" (sound up/down screen on/off etc) and hide F1-F12 behind a modifier key,  is there some way i can swap that from the OS level?19:32
ebernhardsoni'd much rather use alt-f2 than alt-fn-f2, i'm sure you can understand :)19:33
JackSpratI restarted GNOME using sudo /etc/init.d gem restart. Now when I restart I get a blank desktop with no icons or menus nor a login. I have Ubuntu 10.04 LTS19:34
themhzI am typing the command sudo find bazouka -type d -exec chmod 755 ‘{}’ \; and the command enters the folders and each subfolders but I get in all of them while recursing cannot access bazouka/modules/mod_feed no such file or directory19:35
themhzwhat am I doing wrong?19:35
themhzagain the command " sudo find bazouka -type d -exec chmod 755 ‘{}’ \;  "19:35
MonkeyDustthemhz  i guess the single quotes are not needed --> {}19:36
kubotsuebernhardson: this link might get you started:  http://askubuntu.com/questions/24916/how-do-i-remap-certain-keys19:36
fishcookerhello everyone19:37
zuzakebernhardson: you can switch it over in the bios19:37
fishcookershould i disable secure boot control on bios if i wanna dual boot win8 with ubuntu http://askubuntu.com/questions/221835/installing-ubuntu-on-a-pre-installed-uefi-supported-windows-8-system19:37
zuzakbut you probably knew that19:37
rockerkittyIm out too19:39
ebernhardsonkubotsu: sadly xev reports that they are not the same thing,  normal key presses are reported as 'KeyPress' events with a single key,  only about half the keys even report something coming out of xev19:39
ebernhardsonzuzak: i will double check, but didn't see it in the bios earlier19:39
ebernhardsonkubotsu: and the ones that do arnt KeyPress, they are KeymapNotify (whatever that means)19:39
zuzakebernhardson: I have the u300e, let me check19:40
zuzakebernhardson: for me it's labelled "HotKey Mode", I imagine it's similar on the 31019:40
themhzMonkeyDust, thank you that was it19:41
ebernhardsonzuzak: hmm, ok i'll reboot and look again. thanks!19:41
Jamiem93I have had so many issues with Ubuntu today. I really need to learn what I'm doing :P19:41
bazhang!manual | Jamiem93 this may help19:42
ubottuJamiem93 this may help: The Ubuntu Manual will help you become familiar with everyday tasks such as surfing the web, listening to music and scanning documents. With an emphasis on easy to follow instructions, it is suitable for all levels of experience. http://ubuntu-manual.org/19:42
Jamiem93It isn't that. It's everything else.19:42
JackSpratI restarted GNOME using sudo /etc/init.d gem restart. Now when I restart I get a blank desktop with no icons or menus nor a login. I have Ubuntu 10.04 LTS.19:42
Jamiem93I think the problems started with when I burnt ubuntu to a disk on the highest speed.19:42
Jamiem93I'm now trying to burn it again using the lowest possible speed.19:43
zuzaktry checking the checksum19:43
mpmcBlarg, tried to install Ubuntu server minimal 13.04, the installer saw my usb stick and decided to use it as sda & then proceeded to install grub to it, even though I'd set it up to use the hard drive on the machine?!19:43
Jamiem93Done that.19:43
NadiyamaHi all.19:43
bsdbeardJamiem93: You could just put it on a usb drive19:43
Jamiem93I don't have any spare lol.19:44
Jamiem93That's probably what I'll end up doing, buying another USB purely for Ubuntu.19:44
n-iCewill ubuntu-desktop install gnome2 or 3? or unity?19:44
BJFreeman!g dimable cfl19:44
ubottuBJFreeman: I am only a bot, please don't think I'm intelligent :)19:44
ubottuk/ed/x/l/ubuntu-desktop is a metapackage. It depends upon other packages and brings them in; you can safely remove it, but it is recommended that you re-install it when upgrading.19:44
NadiyamaHi, I'm trying to open a .exe file but the "wine" entry is not displayed in the "show all apps" list. Manually open it with "wine app.exe" works. Why isn't wine in the application list? Thank you.19:45
MonkeyDustNadiyama  right click on the exe, then select wine19:46
NadiyamaMonkeyDust, wine is not there. That's what I'm talking about.19:46
ebernhardsonperfect, somehow i missed that in bios but its all good now :)19:46
MonkeyDustNadiyama  maybe a logout does the trick19:47
NadiyamaHmmf... ok brb19:47
SuperSonic68223Good afternoon!19:48
NadiyamaNope, not working.19:49
SuperSonic68223So, if I may, I'd like to ask a question about Linux distros19:49
bazhangSuperSonic68223, this is ubuntu support specifically19:50
bazhangSuperSonic68223, general linux in ##linux19:50
SuperSonic68223Ah, I see. Where would you suggest I head then?19:50
JackSpratAnyone familiar with lipango problems?19:51
bazhangJackSprat, what exactly is lipango19:56
JackSpratWell I am having problems with restarting and getting a blank desktop and no menus (I use 10.04 LTS)19:56
JackSpratwhen I try to use 'nautilus &' it kicks out an error about lipangocairo19:56
gsms3chi. does anyone have any experience with ZFS on ubuntu?19:56
ubottuFor information concerning ZFS and Ubuntu, see: https://wiki.ubuntu.com/ZFS19:56
yeats!info libpangocairo19:56
ubottuPackage libpangocairo does not exist in raring19:56
wilee-nileeJackSprat, You wont know unless you outline your problem. ;)19:56
MonkeyDustlibpango is a PERL module, is what i read here19:57
JackSpratI think my essential problem is I had to restart GNOME and now I have a blank desktop and no menu bars with no login when I restart19:57
MonkeyDust!info libpango-perl19:58
ubottulibpango-perl (source: libpango-perl): Perl module to layout and render international text. In component main, is optional. Version 1.224-1 (raring), package size 217 kB, installed size 529 kB19:58
JackSpratOdd, I should just be using my regular Western keyboard19:58
JackSpratrestarting gem doesn't solve this problem20:00
=== me is now known as Guest3857
=== vibhav is now known as Guest20326
bcuraboyhey guys.i dont know if i'm the only one experiencing this,but when my laptop gets back from suspension,the screen sticks black and nothing happen.20:08
bcuraboyi'm with a nvidia g105m and the driver that comes by default20:09
superjoeI'm here to bitch about the changes to nautilus20:11
superjoewhere can I direct my rage20:11
IdleOnewrong channel, file a bug on launchpad20:12
renzohi all, one quick question: I just installed Ubuntu 12.10, as 13.04 is giving me kernel panics problems due to the new kernel. If I now install the updates to my system, will the new kernel (which is the one giving me problems) install?? Thanks for your replies20:13
brian____renzo, only if you do a dist-upgrade20:14
renzo<brian____> excellent, that was the answer i was looking! thanks man :)20:15
brian____yep, enjoy20:16
kyleczar8how do i create a restore point in ubuntu 12.0420:16
kyleczar8is that possible?20:18
brian____kyleczar8, I don't believe there is a built in function.  You should only really need to worry about your files.20:21
BluesKajkyleczar8, don't know of any such method in linux , but if you keep a regular backup of your files that should be sufficient . Unless you have a differnt issue that you think a regression might help20:21
bazhangKyleYankan, in Disks, you can make a disk image20:21
bazhangerr kyleczar8^20:22
bazhangapologies KyleYankan20:22
KyleYankanha, was really confused20:22
KyleYankanNo worries20:22
brian____KyleYankan,  I personally use http://redobackup.org/ if I ever feel like im about to do something dangerous...20:22
bazhangbrian____, yeah he's gone20:23
BluesKajanother case where instant gratification wasn't available , so he left20:24
bazhangit is available to a degree in the Disks utility though20:24
brian____bazhang, I'm rather slow, I'm glad you mentioned something, I would most likely still be talking to him.20:26
bazhangprobably lag , on my part too brian____20:26
Dr_willisthe internet is slow today. ;)20:28
brian____I think I am going to give up on these adapters..  I have 2 usb wifi adapters that I can smash with a hammer, who would have thought, two off the shelf could be such a pain in the ass.20:28
ThomasFHi. I want to patch a kernel driver, how can I get the source into /usr/src/ i.e. what package provides it (Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) )20:29
Dr_willisi got about 3 usb adaptors - work out of the box with no hassles. :) i read the online reviews at amazon befor i bought them20:29
ubottuThe core of Ubuntu is the Linux kernel: see https://help.ubuntu.com/community/Kernel - You shouldn't have to compile your own, and if you need to troubleshoot issues, you can try a !Mainline kernel instead, but if you insist, see https://help.ubuntu.com/community/Kernel/Compile (see also !Stages)20:29
eristikophilesso i'm looking at the HighCPU troubleshooting page and it has suggestions for figuring out what is causing the high CPU load (by X server) .. anyone know of any commonplace programs that might be doing it? (before i try to randomly shut things off to see whether that helps)?20:31
brian____Dr_willis, Yeah, I've never had problems, didn't know there was still devices that didn't 'just work'.  One of the ones is a Linksys/Cisco AE2500 and the other is a Netgear WNA1000M which uses the RTL8912CU module.  I've gone backwards now.  The Netgear wanted to work just couldn't negogiate the connection, so I used the mfg drivers, blacklisted the built in modules and now it doesnt detect my device at all when I plug it in20:32
brian____, yet the 8192cu module is loaded.20:32
bazhangeristikophiles, in htop or top20:32
eristikophilesalso, my box is kind of old.. how do i know if it's actually normally and my box is just handling it badly / taking longer to re-normalize, relative to like, it actually being too high a CPU use?20:32
brian____I'm pretty sure I've read every page on the entire internet that applies to the rtl8192 module.20:33
JackSpratI have a blank desktop (no icons, no menu bar, no login box) and can't get X to start with 'startx' it give me an error that Server is already active for display 020:37
jazzkutyahow can i check what updates were installed today?20:37
tgm4883jazzkutya, /var/log/apt/history.log20:38
Neytirihi i installed 12.4, and instlled the gnomeshell and gnome tweark tool, how can i get the toolbarwith all the launchers on the bottom of my screan20:38
jazzkutyatgm4883: thanks!20:38
adamkJackSprat: Check your users ~/.xsession-errors file to see if there are any errors reported for your blank desktop.20:40
wilee-nileeNeytiri, There is a translucent panel in the shell that shows opened apps, I use the cairo dock additionally20:40
JackSpratadamk, how do I do that?20:40
w30you used to  need gnome panel installed; its been a while since I did that20:41
WXZ1how can I tile a group of windows horizontally for lucid?20:41
adamkDrop to a console, login, and run 'less ~/.xsession-errors'20:41
adamkOr use pastebinit to pastebin the full log file.20:41
JackSpratadamk, wowzers, I think I have a lot of errors but not sure where to start. I have no access to my GUI20:43
adamkJackSprat: So pastebin it and give us the URL.20:45
JackSpratI am only in terminal so I don't have a mouse to select it. Is there another way to capture it?20:46
WXZ1how can I tile a group of windows for lucid?20:47
adamkJackSprat: Use pastebinit.20:47
wilee-nileeWXZ1, YOu will probably have to look on the web there are desktops that do this, not sure really.20:49
WXZ1wilee-nilee: yeah, tiling window managers, but changing my entire DE should not be the solution for such a simple problem20:49
JackSpratadamk, I went to download pastebinit but for some reason my network is not turned on. Not sure why though...20:49
JackSpratGods this is turning into a headache20:50
melodiedoes someone have knowledge about service management in the last versions produced since last year ? It looks like a mess to me and I would need help on the matter20:50
* melodie hands an aspirin to JackSprat 20:51
JackSpratthanks melodie20:51
JackSprateven if I restart in recovery mode and select netroot, I can't connect to the network, any suggestions?20:52
adamkSorry, not really up on networking and NetworkManager on Ubuntu. More of an X guy myself.20:53
melodietry "sudo dhclient <your network interface>"20:53
melodieexemple: sudo dhclient eth020:53
JackSpratonce I get pastebinit adam I will certainly come back to you20:53
Neytiriok, take 2, i am running 12.4, using the gnome classic desktop enviroment, i have genome-tweak-tool, gnome-pannel, gnome-shell and all dependencies installed, how can i get the bar at the top of my screen to be at the botom20:53
melodieJackSprat try as I just said20:54
melodieeasy and has chances to work20:54
melodieJackSprat are you on ethernet or on wifi ?20:54
gottwisstneytiri: Have a look at the tweak tool and gnome pannel20:54
gottwisstthe tweak tool20:54
JackSpratone sec I (foolishly) attempt to start GNOME and now terminal is unresponsive to me, lemme restart20:55
gottwisstneytiri: Also, try right clicking on the pannel and seeing if any options come up20:55
CorvusCoraxHi. I had ubuntu installed on a laptop. now the harddisk made problems, and I installed a new one and made a binary 1 to 1 copy of the system to the new harddisk, which used to work flawlessly on linux. however ubuntu uses deviceID's in grub config and - it seems - in a few other places too. What do I need to do to tell the system to adapt to the new harddisk id it is now running on?20:55
melodieJackSprat you just hit the keys : Ctrl+Alt+F1 and you will get a virtual console : tty20:55
Neytirii tried the tweak tool and right licking20:56
melodieand you connect as you, and your login name20:56
JackSprateven that was working melodie, I was get [[A and what not20:56
melodieJackSprat then you can send commands20:56
melodieJackSprat then Ctrl+Alt+F7 or F8 brings you back to the gui console20:56
gottwisstneytiri: I'll just hop on to gnome classic and have a look myself - brb20:56
JackSpratokay, I attempted 'dhclient eth0'20:57
eristikophilesbazhang- hah. i just realized you were answering saying to use htop or top. i thought you were asking which i used to figure this out20:57
JackSpratOutput is: SIOCSIFADDR: No such device20:57
eristikophilesi have so many random X-related things running in htop that take up all the slots on my screen20:57
JackSprateth0: Error while getting interface flags: No such device20:58
JackSpratBind socket to interface: No such device20:58
eristikophilesif i pageup pagedown and look at the full list in htop, btw, it shows that about nothing is running that uses anything significant at all20:59
eristikophilesand the biggest thing that is running, not at all this way? xchat20:59
eristikophilesit's mostly using memory though21:00
melodie<JackSprat> eth0: Error while getting interface flags: No such device // look at ifconfig which interface is up21:00
eristikophilesand 30% of memory (biggest by a long shot) is X .. as is the biggest CPU21:00
melodieelse you do sudo ifconfig eth0 up21:00
gottwisstneytiri: my computer isnt actually displaying the pannel properly21:00
melodieJackSprat else you do "sudo ifconfig eth0 up"21:00
gottwisstneytiri: But I also am not getting any options for that21:00
melodiecourage !21:00
Neytirikk, so it inst just me21:00
gottwisstneytiri: That option may not have been in gnome classic21:00
Neytirii had it what way on my 11.10 system befor ei nuked it21:01
gottwisstneytiri: I know that cinnamon, linux mints default, does have that option21:01
asunnOWhat are the key differences between debian and ubuntu21:01
gottwisstneytiri: I cinnamon is quite like gnome 2, I think21:01
JackSpratI have heart. 'sudo ifconfig eth0 up' gave me "eth0: ERROR while getting interface flags: No such device"21:01
asunnOjacksprat i have also gotten that error with an eth cable plugged in, have you tried restarting21:02
Neytirilast time i tried it it hated it but its worh another look21:02
JackSpratjust 'ifconfig' gave me "Local Loopback: inet addr: of"21:02
gottwisstI've also heard that maté is very like gnome 221:02
gottwisstbut I've not tried that21:02
JackSpratyes have been restarting a bunch Neytiri with no luck21:02
tavvva1Hello guys ...21:03
asunnOdid you try unity21:03
asunnObooting into unity21:03
JackSpratI have 10.04 LTS so I pre-Unity21:03
tavvva1Is the xserver-xorg-video-mach64_6.9.3-0ubuntu1_i386.deb maintainer here?21:03
gottwisstNeytiri: That's about all I can help. I'm out.21:03
coder2anybody http://askubuntu.com/q/288759/12193821:05
Texasclean your heatsink coder221:05
asunnOcan neone explain me the key differences in ubuntu from debian21:06
coder2Texas, you mean the fan?21:06
JackSpratany other that would be helpful melodie?21:06
commandocodingIrssi 0.8.15 (20100403) - http://irssi.org/21:07
tavvva1nobody? xserver-xorg-video-mach64_6.9.3-0ubuntu1_i386.deb21:07
melodieJackSprat the command ifconfig21:07
Neytirii'll give cinamon a look21:08
coder2asunnO, first go and learn some english ,please do not use chat language here21:08
melodieJackSprat the command ifconfig will tell you if there is "eth0" or "eth1" or "eth2" or "wlan0" additionnally to "lo"21:08
Neytiribut i have one othre question21:08
melodieas interface21:08
Neytirihow can i make it so my /ert/resolv.conf file stopes getting over written21:08
asunnOthats rude21:08
JackSprat"Link hmm, i see "lo" as the only interface21:08
JackSpratI don't see any thing else21:09
jakeyI had an ubdate on ubuntu now the resize of the screen is to big or to small and before it fitted very well?21:09
melodieJackSprat try this " sudo iconfig eth0 up"21:10
moppersasunno, the first thing you will notice, ubuntu has a unique desktop interface21:10
melodieJackSprat try this " sudo ifconfig eth0 up"21:10
melodiemissed the "f" sorry21:10
mopperscan i ask about backup software? what are people using?21:10
moppershow good is dejadjup?21:10
JackSpratI get "eth0: ERROR while getting interface flags: NO such device"21:11
wilee-nileemoppers, I clone and use grsync.21:11
melodiemoppers I use mc, but you can use grsync or luckybackup or...21:11
HRH_H_Crabso i've upgraded to 13.04 and i can't log in to anything. X seems to be working but lightdm displays a black screen. gdm draws a background but has no widgets or text entry field i can actually log in to. i guess ive destroyed any chance i have of running gnome 2 again, but can anyone help me to fix my display manager so that i have some sort of working gui? id "happily" accept unity at the moment.21:11
melodieJackSprat what is the ethernet card in your machine ?21:12
genii-aroundJackSprat: Does: ifconfig -a      show anything besides lo ?21:12
moppersgrsync is a gui for rsync?21:12
melodieJackSprat look with the command : "lspci | grep Ethernet"21:12
melodiemoppers yes21:12
mopperswhat is mc?21:12
wilee-nileeHRH_H_Crab, If you need graphic drivers they need to be redone in a upgrade.21:12
JackSpratOh goodness, melodie, no clue. The computer is about 2 years old and was working fine. I just use it to run my bioinformatics software21:12
melodiemoppers a text curse like file manager21:12
HRH_H_Crabwilee-nilee: i think graphics drivers are working21:13
melodieJackSprat look with the command : "lspci | grep Ethernet"21:13
moppersoh midnight commander?21:13
HRH_H_Crabim looking at the lovely peach and purple swirly background21:13
JackSpratifconfig -a just shows "lo"21:13
HRH_H_Crabthere is just no gui widgets.21:13
melodieJackSprat I just told you what to do !21:13
melodieJackSprat look with the command : "lspci | grep Ethernet"21:13
moppersi remember midnight commander, yes21:13
HRH_H_Crabi think its because my dm session was "gnome classic" and thats been killed off or something.21:13
moppersas for media? are hard drives fine? I need three, and rotate them?21:14
genii-aroundmelodie: I suspect lshw -C network  will show no drivers loaded for whatever devices lspci shows21:14
mopperstape drive seems very expensive21:14
wilee-nileeHRH_H_Crab, If the drivers before the update were ones you installed you have to redo them.21:14
melodiegenii-around good idea too21:14
commandocodinglol Sorry folks new to irssi that was supposed to be a command21:14
melodiegenii-around can you continue helping JackSprat ? I must go afk21:15
tttbanyone know a good clipboard history utility?21:15
HRH_H_Crabwilee-nilee: i was not using proprietory drivers if thats what you mean.21:15
JackSpratlspci with Ethernet shows nothing, but lspci on its own also doesn't list my card21:15
melodieJackSprat if your card is not seen, then either it's dead or unplugged21:15
kyleczar8does anyone have any tips for a new ubuntu user.... currently running Ubuntu 12.04 lts and didnt know if there were any tweaks or tips that someone could recommend21:16
wilee-nileeHRH_H_Crab, Yep that's what I Mean. ;)21:16
leminHRH_H_Crab: you get login screen21:17
HRH_H_Crabi get the coloured background of the login screen21:17
HRH_H_Craband i get a cursor that tracks the mouse perfectly21:17
HRH_H_Crabbut other than that,21:17
HRH_H_Crabits a barren featureless desert21:17
HRH_H_Crabnothing to type my username in21:17
HRH_H_Crabno buttons to click21:18
Neytirihow can i make it so my /ect/resolv.conf file stopes getting over written on startup21:18
JackSpratHRH_H_Crab, I also have that problem21:18
HRH_H_Crabthats if i use gdm21:18
HRH_H_Crabif i use lightdm its black...21:18
kyleczar8does anyone know how to create a restore point or anything similar in ubuntu 12.0421:18
HRH_H_Crabblack like a ravens wing21:18
MonkeyDustkyleczar8  backup21:19
nodieI'm experiencing a strange problem: my mouse pointer disappear every time I enter into a QT/KDE window21:19
kyleczar8holy shit.. i feel stupid21:20
kyleczar8thanks monkey21:20
nodiedo you know what could it be? I'm getting crazy21:20
=== CanadianPirate is now known as CanadianPirate|a
leminHRH_H_Crab: start in terminal then SUDO APT-GET INSTALL GDM.21:20
HRH_H_Crabwhich is already installed...21:21
nodieI tried to reinstall all the Xorg/qt/gtk packages but still have the same proble21:21
leminHRH_H_Crab: then try instal lightdm21:21
HRH_H_Crabwhich is already installed21:21
HRH_H_Crabi'll humour you though21:22
HRH_H_Crabjust for the heck of it21:22
HRH_H_Craband uninstall / reinstall gdm21:22
HRH_H_Craband see what that gets me.21:22
minetapeHello there, when i was using my live installation on ubuntu on a USB thumb drive, i decided to reboot the computer without rebooting into ubuntu, but after the black screen, it looked like it was booting up again. so i pressed CRTL+ALT+DEL and it went back to booting the original installation on the computer. Would the installation be broken? or is it still usable?21:22
minetapeby this "Would the installation be broken? or is it still usable?" i mean the live installation21:22
MonkeyDustminetape  it's either live or an installation21:23
HRH_H_Crablemin: no worky.21:23
minetapeits live21:23
minetapebut is it still usable?21:23
llldinoHey guys im having serious trouble booting from grub, I can only boot in nomodeset21:23
MonkeyDustminetape  yes21:23
BluesKajHRH_H_Crab, are you dropping to a tty , stopping lightdm and doing a startx ?21:23
minetapesweet :321:23
HRH_H_Crablets try lightdm21:23
minetapeTime to turn evil and boot it on the library PCs...21:24
HRH_H_CrabBluesKaj: im using ssh21:24
HRH_H_Craband im doing /etc/init.d/gdm restart after uninstall / reinstalling21:24
Dr_willissudo service lightdm restart21:24
Dr_willisor sudo service gdm restart21:24
leminHRH_H_Crab: ctrl-alt-f8 reinstall lightdm21:24
HRH_H_Crablemin: reinstalling lightdm now over ssh21:25
HRH_H_Crabno display manager / Xorg currently running21:25
HRH_H_Crabwill start it once install is done and report back21:25
HRH_H_Crabright its done dpkg-lightdm reconfigure or whatever21:26
CorvusCoraxHi. I had to move my ubuntu system to another harddrive, now the partition ids changed and it doesnt boot. where do i need to change them so auto-updates will not reset them?21:26
HRH_H_Crabive told it i want to *shudder* use lightdm21:26
JackSpratHRH_H_Crab I just had this happen to me and I am using 10.04 LTS pre-Unity21:26
Dr_willissudo dpkg-reconfigure lightdm21:26
HRH_H_Crabwill now start it and see what happens21:26
jakeyanyone have experience magento cms?21:26
wilee-nileellldino, And you have checked all the driver options? You can insert nomodeset in the grub menu using gksudo gedit /etc/default/grub change GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" To GRUB_CMDLINE_LINUX_DEFAULT="nomodeset quiet splash" tehnrun sudo update-grub21:26
HRH_H_CrabJackSprat: although im fuming like crazy, this is perhaps the least destructive ubuntu upgrade ive experienced yet. at least it didnt hose grub or X totally!21:27
HRH_H_Crablemin: uninstalling / restarting lightdm hasnt worked im afraid.21:27
HRH_H_Crabjust gives me a black screen.21:27
JackSpratI didn't even upgrade…it just died on me and I am a HUGE noob…and this is for my job!! Christ21:28
llldinowilee-nilee, What do you mean check the driver options? I'm in nomodeset right now21:28
HRH_H_Crabim 99% sure that what i am experiencing is punishment for using classic gnome.21:28
leminHRH_H_Crab: are you using nvidia card.21:28
HRH_H_Crablemin: no.21:28
HRH_H_Crabim using an ati card with free drivers21:28
Dr_willisI dont see how your selected desktop affects lightdm at all21:28
wilee-nileellldino, There is an additional drivers option if you need any.21:29
HRH_H_Crabn.b. i am NOT using the proprietory drivesr21:29
HRH_H_Crabn.b. when i use gdm i see the classic ubuntu peach and purple background and i have a fully functional cursor21:29
llldinowilee-nilee, I already installed a driver for my nvida gforce 9400m this morning, it didn't help the issue21:29
Daemoenhey guys, anyone know why on ubuntu 10.04, I can edit /etc/group, add a user to a group, and it gets completely ignored ?21:29
HRH_H_Crabso i am pretty damn sure that Xorg is relatively healthy.21:29
CorvusCoraxDaemoen, for a group change to have effect the user in question needs to spawn a new shell - aka re-login21:30
leminHRH_H_Crab:  ctrl-alt-f1 then sudok21:30
wilee-nileellldino, Cool, I was just giving you the option to not have to get in with typing nomodeset everytime at grub, it can be removed if you find what is needed to not use it.21:30
DaemoenCorvusCorax: i can su to root and su - <user> and it isnt showing up in groups21:30
Daemoensu - user does spawn a new process21:30
CorvusCoraxtrue, that should work21:31
Dr_willistry 'login username' perhaps?  or test it in the console.21:31
CorvusCoraxdoes it work when u use the addgroup cmdline program?21:31
llldinowilee-nilee, I don't want to be in nomodeset, the graphics are messed up, I just want my computer to boot properly21:31
Daemoenone sec let me test addgrp method21:31
CorvusCoraxmight be some pam-issue, pam can do a lot of weird things21:31
leminHRH_H_Crab: got cut off. Sorry. Sudo /etc/init.d/gdm restart21:32
wilee-nileellldino, Right, however you complained about grub and having to use nomodeset.21:32
CorvusCoraxi had to move my ubuntu to a new harddisk, device ids changed. where do i need to set them? i assume /etc/defaults/grub, maybe in fstab. where else?21:32
HRH_H_Crablemin: as stated before, that starts gdm21:32
llldinowilee-nilee, I was just saying I can only boot into nomodeset and not into "regular" mode21:32
Daemoenno addgrp in 10.04 that i can see21:32
CorvusCoraxis there an automated way to update them all?21:32
HRH_H_Crabthe problem is that all gdm does is display the clasic ubuntu background and a mouse pointer.21:33
HRH_H_Crabit lacks any buttons to click or any text field to enter a username or password...21:33
wilee-nileellldino, I understand, hope you get it fixed. ;)21:33
SysaxedCorvusCorax: maybe you can try grubrepair21:33
dfxhello guys can someone tell me how to get status bar in dwm i've followed many guids but nothing works im on wheezy21:33
SysaxedCorvusCorax: or what was its name,,,21:33
Sysaxeddfx: wheezy? #debian21:33
llldinowilee-nilee, I hope I do too before I break something more expensive21:33
CorvusCoraxSysaces, thanx ill try that21:34
CorvusCoraxDaemoen, the program ur seeking is groupmems21:34
SysaxedCorvusCorax: this is something different, but it could work well for you https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows21:34
Dr_willisllldino,  i normally have to use nomodeset the first time,  then install the nvidia drivers.  that is your video card?21:34
SysaxedCorvusCorax: most likely automatic repair will work for you :)21:35
llldinoDr_willis, yes Gforce 9400m, I installed the drivers this morning via Xorg21:35
dfxSysaxed: yeh im on wheezy but its based on it so not so much diffrent i guess21:35
LoshkiCorvusCorax: Daemoen: I think you have to logout the user and relogin to see group changes, it's not enough to just spawn a new shell. I can't explain why, however....21:35
llldinoDr_willis, I don't get it though, everything was fine yesterday this just started today and I didn't do anything major21:35
CorvusCoraxthanks Sysaxed that might work. is there a way to spawn the automatic repair without a boot cd - from the installed system itself?21:36
SysaxedCorvusCorax: well, if you can't boot it, how could you run something from it? :)21:36
SysaxedCorvusCorax: running a live cd is easy21:36
CorvusCoraxi can boot by overriding the root partition directive on the kernel cmdline - root=/dev/sdaX21:36
SysaxedCorvusCorax: most probably you already have ubuntu cd21:36
HRH_H_Crabjust to confirm that there is nothing wrong with my graphics card drivers, ive just shut off gdm and done "start x"21:37
sdglsdgkjgdaMy touchpad left click stops working after a while on my laptop, and is only fixed by a reboot. What could be going on?21:37
CorvusCoraxin fact i dont, i'd have to download one and burn it ;)21:37
SysaxedCorvusCorax: oh, if you can boot then its ok for you21:37
leminHRH_H_Crab: sudo apt-get install lightdm-gtk-greeter21:37
HRH_H_Crabthat gives me a white screen with a working mouse pointer which even spawns a context menu when i right click it21:37
SysaxedCorvusCorax: I can't think of anything else that you must change. If everything works then you're alright21:37
Dr_willisHRH_H_Crab,  you dont have 2 monitors hooked up do you? I recall once gdm/lightdm showing the login info on the wrong monitor for me (which i had turned off)21:37
HRH_H_CrabDr_willis: no.21:37
DaemoenLoshki: i actually did fully logout.  i also just found /etc/gshadow and made it match the proper formatting for the group in question, just in case thats the file its really using.  doesnt matter which file i modify, its ignoring both /etc/group and /etc/gshadow21:38
CorvusCoraxi just found out that if i change /boot/grub/bla.cfg then the next apt-get upgrade that installs a kernel will override it and put the old values back21:38
jakeyI had an ubdate on ubuntu now the resize of the screen is to big or to small and before it fitted very well?21:38
SysaxedCorvusCorax: some time ago I had ubuntu installed on usb drive, and device id changed every time I plugged it in another computer, all I had to do was to change grub options and everything else worked without any other changes21:38
HRH_H_Crablemin: o.k. trying that.21:38
CorvusCoraxso ubuntu stores the device ids it has been installed on somewhere, likeky /etc/defaults21:38
SysaxedCorvusCorax: no-no21:38
HRH_H_Crabit wants to install it and it seems like something i should have so maybe this will work...21:38
SysaxedCorvusCorax: you must change grub configs correctly21:39
SysaxedCorvusCorax: did you run grub-update?21:39
SysaxedCorvusCorax: update-grub *21:39
darthsitiusWhat does the "daemon" user in ubuntu used for?21:39
CorvusCoraxno yet, currently running knoppix livecds to resize some partitions21:39
CorvusCoraxill run that21:39
HRH_H_Crablemin: interesting.21:39
=== CanadianPirate|a is now known as CanadianPirate
SysaxedCorvusCorax: there are some grub files that are generated automatically, you shouldn't touch them21:39
HRH_H_Craban amusing "improvement"21:39
leminHRH_H_Crab: dr_willis may have a point. Can you see mouse pointer21:40
HRH_H_Crablemin: yes.21:40
HRH_H_Crabthats all.21:40
HRH_H_Crablightdm is no longer a black screen!21:40
SysaxedCorvusCorax: you should edit config files and then run update-grub :) google it21:40
moppersI am trying to use mc in unity: how do i get the alt key working to use the dropdown menu?21:40
HRH_H_Crabits now a black screen with a white X!21:40
HRH_H_Crabi only have one monitor21:40
leminHRH_H_Crab: black with white x?21:41
HRH_H_Crabblack background21:41
HRH_H_Crabwhite X mouse pointer.21:41
HRH_H_Crabits got a white outline21:41
HRH_H_Crabyou know what i mean.21:41
Dr_willissounds like X is starting but whatever binarys are for lightdm are not.21:42
schultzawhy is pastebinit no longer working?21:42
HRH_H_CrabDr_willis: i dont think its a problem with any binaries at all.21:42
HRH_H_Crabim almost certain that the display managers are trying to start classic gnome21:42
HRH_H_Crabwhich has been axed in the face21:43
Dr_willisHRH_H_Crab,  you have auto login enabled for that user?21:43
HRH_H_Craband therefore they don't know / cant start anything useful.21:43
HRH_H_CrabDr_willis: no.21:43
Loshkidarthsitius: the daemon user is handy for things which run in the background that don't have a 'real' user...21:43
HRH_H_Crabi should have switched to unity before i did the upgrade /o\21:43
Dr_willisHRH_H_Crab,  then how can be the DM;s be trying to start classic gnome without you logging in21:43
HRH_H_Crabfair point.21:43
Dr_willisyou can select your default desktop in the users .dmrc file21:43
darthsitiusLoshki: And the permissions?21:43
HRH_H_Crabi wonder what the hell the problem is then.21:44
Dr_willisi think you can go to the console. kill X and any DMs running and do 'sudo lightdm' and it SHould show error/info messages in the console21:44
HRH_H_CrabDr_willis: how the hell do i get a console up?21:46
MikeHIs there a more in depth way to see what processes/kernel modules are using memory than top? I currently have 6GB in use (- buffers) but in top the highest memory usage is 2.2%, with the rest hovering between 0.1 and 1% - certainly not enough to account for 6gb out of 821:46
HRH_H_Crabctrl-alt-f(whatever) doesn't work.21:46
jakeyI had an update on ubuntu now the resizing of the screen dimentions is to big or to small and before it fitted very well?21:46
Loshkidarthsitius: not sure what you're asking; it's a user whose uid is 1 and whose gid is 1. Logins are disabled for user 'daemon'.21:46
=== 17SACU96Y is now known as TaiChi
darthsitiusLoshki: Thanks!21:47
CorvusCoraxSysaxed, update-gru did it :-)) thanks21:47
Dr_willisHRH_H_Crab,  you might want to try booting into Text mode. if the framebuffer consoles are not working. Ive seen them not work for specific res's on some hardware. or video drivers goof them up21:47
ubottuTo start your system in text-only mode append 'text' (without the quotes) to the kernel line in the grub menu. You can access the grub menu by pressing Esc (Grub legacy) or Shift (Grub2) during boot. For more info see https://help.ubuntu.com/community/BootOptions#Text%20Mode21:47
=== TaiChi is now known as Guest86821
HRH_H_Crabill try that21:48
maxwelHello can someone help me21:48
CorvusCoraxcan ubuntu be installed using lilo instead of grub ?21:48
wilee-nileemaxwel, Not with out a description. ;)21:49
CorvusCoraxmaxwel mayyybe21:49
Dr_willisCorvusCorax,  ive heard of it being done.. but i dont think its very useable21:49
atrusMikeH: check the "free" command. It may indicate that a lot of memory is used just for buffers, and not actually by any process. which is fine. it's just sitting there in case it's needed, but will be discarded immediately if the memory is needed for something else.21:49
maxwelFor some reason I have to have it in old ubuntu shell for it to be fast can someone tell me why ?21:49
llldinoOk so I attempted to install nvida drivers, they're up to date21:49
Dr_willis'old ubuntu shell' ?21:49
MikeHatrus: As I say, 6gb is in use minus buffers.21:49
maxwelYes ubuntu classic21:50
llldinoWhen I try and update grup, it says "Mas OS X" found on /dev/sda221:50
maxwelI have 16gbs of ram an i7 3.80 gh21:50
atrusMikeH: ah, so you did, missed that. out of ideas here.21:50
maxwel120SSD and a 2 tb hdd21:50
maxweland a 650 ti ssc gpu21:50
wilee-nileeyee old ubuntu classic21:51
jakeyI had an update on ubuntu now the resizing of the screen dimentions is to big or to small and before it fitted very well?21:51
=== tuor is now known as tuor_
CorvusCoraxok while im in the channel anyway im upgrading to 13.0421:54
CorvusCoraxthat way i can buggr you if it goes horribly wrong21:54
ninozhi my grub2 is not booting the first entry despite the defaults/grub file having the timeout set to 2 and running update-grub21:54
* Daemoen learns a new lesson.21:55
Daemoenchanging /etc/group directly in ubuntu seems to get ignored.... should be using vigr XD21:55
Daemoenlesson learned :)21:55
* Daemoen waves21:55
HRH_H_Crabthis is a nightmare. neither shift or esc seems to do anything21:56
CorvusCoraxi had that once, turned out the bios wasnt detecting the usb keyboard, so no keys were working in the post process, including bootloader, only once the kernel was loaded did keys work21:57
LoshkiDaemoen: a reboot would've fixed it :-)21:57
CorvusCoraxTHAT sucked21:57
HRH_H_Crabmy keyboard is a bluetooth usb thing21:57
llldinoYknow screw 13.04 im putting in LTS21:57
HRH_H_Crabso i guess thats why.21:57
HRH_H_Crabthis is intredasting21:58
HRH_H_Crabi just did apt-get install gnome and it wants to install a whole heap of stuff.21:58
HRH_H_Crabthat might somehow jolt the various display managers into life as some peculiar side-effect21:58
aubreychaogood morning21:59
CorvusCoraxnormally im using gentoo, ubuntu is for my wife since she needs something low maintenance22:00
CorvusCoraxshe used to be a mac user :)22:00
cyrano_X keeps crashing when i launch chrome or steam. I'm not sure what I might have done recently that could have caused this. I'm currently running precise.22:02
Fishscene1Is it possible to install "libudev0:i386" on Ubuntu 13.04 x64?22:03
Fishscene1The VMware View client depends on this package. But I get an error saying: Depends:  libudev0:i386 (>= 147) but it is not installable22:04
fyksenI have just bought game de tycoon. Installed the .deb from the link I got. When I try to run it I get:  error while loading shared libraries: libXrandr.so.2: cannot open shared object file: No such file or directory22:05
n-iCewhat would be the best way to install ubuntu 13.04 with gnome2? installing ubuntu server then gnome, or installing ubuntu 13.04 plain install and remove unity etc22:09
trismfyksen: it is in libxrandr2, which you probably should have by default...if you are on the 64bit version you may need libxrandr2:i38622:09
Ponch0how do I check what login manager I'm running?22:10
n-iCehi Ponch022:10
Ponch0hi n-iCe22:10
n-iCePonch0: whay does echo $DESKTOP_SESSION say22:11
=== jhirley_ is now known as jhirley
lixgood evening. my NetworkManager does not consider the DNS IPs entered using PPTP config. Is this still an unresolved issue/bug? http://robert-oswald.rodom.dyndns.org/blog/?p=79722:11
fyksentrism, TY, but now I get another error: error while loading shared libraries: libgtk-x11-2.0.so.0: cannot open shared object file: No such file or directory22:11
n-iCePonch0: that is :)22:11
Ponch0hmm, I didn't know that, I thought it was either lightdm or gdm?22:12
cyrano_n-Ice: I don't thin that is what Pncho was looking for.22:12
ewfrпыщь пыщь!22:12
schultzahas pastebinit been updated?22:13
n-iCeif you run gnome usually is gdm which means gnome display manager Ponch022:13
sinussshi. Why won't my amazon EC2 instance that was created from my AMI wont run? I get this: Instance reachability check failed at 2013-05-01 10:03 GMT+120022:13
Ponch0thank you :)22:13
ubottupastebinit is the command-line equivalent of !pastebin - Command output, or other text can be redirected to pastebinit, which then reports an URL containing the output - To use pastebinit, install the « pastebinit » package from a package manager - Simple usage: command | pastebinit -b http://paste.ubuntu.com22:13
trismfyksen: libgtk2.0-022:13
n-iCePonch0: just to be sure, cat /etc/X11/default-display-manager22:14
tttbi need someone to make a "why you should use vim" youtube video displaying quickly and efficiently  great things you can do on it that you can't in other editors22:14
n-iCewhat would be the best way to install ubuntu 13.04 with gnome2? installing ubuntu server then gnome, or installing ubuntu 13.04 plain install and remove unity etc22:14
Myrttin-iCe: with gnome2?22:14
fyksentrism, I already have it installed.22:14
n-iCeMyrtti: yes22:14
Myrttin-iCe: you do know there is no sane way of getting gnome222:14
trismfyksen: again, probably the :i386 version22:14
n-iCeno gnome3, no unity, no kde, no xfce22:14
Ponch0n-iCe: it is indeed GDM, thank you.22:14
n-iCePonch0: no problem.22:15
n-iCeMyrtti: why you say that22:15
Dr_willisgnome-shell 3.8 has its own gnome-2 look fallback mode.. that most likely will be the 'standard' gnome2 way in the future22:15
trismfyksen: if you get another error after that, pastebin: ldd /path/to/gamedevbinary; and I'll work out a list of packages22:15
Myrttin-iCe: because gnome2 is no supported by the GNOME project itself anymore. They've moved over to Gnome3.22:15
n-iCewhat about GNOME Fallback22:15
fyksentrism, thanks. I still get an error .its libasoung.so.2 How do I check what package I need?22:16
GunArmso I'm trying to come up with a data storage plan for my data, theres about 10tb of it.  Write speeds aren't hugely important.  I'm thinking of for my primary using a raid10 of 10x2tb drives, and a secondary raid6 of 6x2tb drives.  any thoughts?22:16
trismfyksen: since you likely have most of those libs already as the amd64 version, you could just do: dpkg -S libasound.so.2; and it will give you the package name, then install the :i386 version22:17
fyksentrism, hmm I get this: sudo dpkg -S libasound.so.222:18
fyksenlibasound2:amd64: /usr/lib/x86_64-linux-gnu/libasound.so.2.0.022:18
fyksenlibasound2:amd64: /usr/lib/x86_64-linux-gnu/libasound.so.222:18
sduncancan anyone offer some advice for getting an ubuntu installation up and running on a macbook pro 6,2? I've been at this for hours trying everything I can find. I can boot in recovery, get a shell and startx ... but booting normally either yields an empty purple screen or just a blank screen. I can't seem to get any verbose boot output22:18
trismfyksen: so in that case you would install libasound2:i38622:18
n-iCeMyrtti: ubuntu-desktop22:19
sduncani should mention I'm working with 12.0422:19
n-iCeMyrtti: I read it is gnome222:19
Myrttin-iCe: in 13.04? no.22:19
n-iCeMyrtti: what's gonna install22:20
MonkeyDustn-iCe  it's gnome3, but it *looks* like gnome222:20
Myrttin-iCe: Ubuntu with Gnome3 and Unity.22:20
n-iCeI think I'm gonna install ubuntu-server 12.04 lts22:20
GunArmreally 13.04 ships with gnome3 instead of unity?22:21
MyrttiGunArm: unity *is* built on gnome322:21
chilicuilhello, I want to know the packages where are the dependencies of a binary, I've heard that dpkg-shlibdeps should work, but it requires that I configure my system as if I'd want to create deb pkgs22:21
MonkeyDustGunArm  unity is a gnome3 shell22:21
GunArmdid not know that22:21
shortstraw8So I just downloaded something and went to view it and noticed that their is a USR file in there that is locked. It says it is  Adobe flash player, how it ended up here I have no clue. I was wondering where it is supposed to be and how to get it there since it is locked. Running Ubuntu 12.0422:21
user_-i have ubuntu 12.10 with wubi in internal sata hard disk with windows7 and xubuntu 13.04 in external usb hard disk 80gb and flash disk 4gb22:22
=== derp__ is now known as Cream
MonkeyDustuser_-  how nice, so how can we help you22:24
user_-live usb in flash disk using unetbootin22:24
MonkeyDustuser_-  all sounds great, so what's your question?22:25
Ponch0I have ubuntu gnome-remix 13.04, how would I remove the icons from the top like the "Universal Access Settings" icon?22:25
AlexTheRealOneHi all need help22:25
user_-i want to know which games you take from steam in linux22:25
AlexTheRealOneInstall new ubuntu 13.04 an everytime i try to download something the connection broke what should i do? on win7 the connection was perfekt but i want ubuntu22:26
MonkeyDustuser_-  sounds off-topic to me22:26
lixAlexTheRealOne: how are you downloading? using a browser?22:27
lixAlexTheRealOne: what is your connection? wlan? eth?22:27
lixAlexTheRealOne: what is the network interface? atheros chipset?22:27
user_-i want browse the wubi virtual disk from windows 722:28
AlexTheRealOnelix, 1I try the browser and 2try the software center to install synaptiks but always failed all downloads on half and yes wlan atheros chipset22:28
user_-i can to browse ext4 file system from windows using total commander and a plugin22:28
lixAlexTheRealOne: did you install the correct driver for the atheros chipset?22:28
user_-'diskinternals reader'22:28
lixAlexTheRealOne: try using a ethernet connection to see if the connection would be stable...22:29
idnamei installed the nvidia driver from the website but now iam stuck with 640x480 resolution..22:29
lixAlexTheRealOne: try to find out where a possible problem could be in the first place (wifi card, router, browser, system etc.)22:29
MonkeyDustuser_-  wubi is not made to be used on prodection system22:29
trismchilicuil: you can do it with a bit of ldd and apt-file, I hacked together a quick script for it a while ago: http://paste.ubuntu.com/5620717/ (which could probably use much improvement)22:30
Dr_willisuser_-,  on my steam account. when i login to steam on linux. it let me install all the  ones that had linux clients/ports.22:30
AlexTheRealOnelix, i think its somewhere in system cuz i had a stable connection on win722:30
Star_Lighthello is there any room with doctors?22:30
lixAlexTheRealOne: I dont know anything about wind00ze, sorry22:30
idnamewhat should i do to fix this problem and restore to my native resolution?22:30
Dr_willis!alis | Star_Light22:31
ubottuStar_Light: alis is a services bot that can help you find channels. Read "/msg alis help list" for help and ask any questions about it in #freenode. Example usage: /msg alis list #ubuntu* or /msg alis list *http*22:31
AlexTheRealOnelix, okay now its seems like the connection stay safe i downloaded Synaptiks22:31
WXZhow do I move an entire window group across workspaces22:31
chilicuiltrism: thanks!, I'll look at it22:31
lixAlexTheRealOne: what if you use aptitude in the command line?22:31
=== peter_ is now known as Guest76058
lixAlexTheRealOne: terminal > "sudo apt-get update" to see if the connection is "stable" there...22:32
AlexTheRealOnelix, okay try it out now22:32
user_-AlexTheRealOne bring near wifi adapter with an usb 2.0 cord extension22:33
AlexTheRealOnelix, hmm have to wait until synaptiks have installed22:33
idnamei installed the nvidia driver from the website but now iam stuck with 640x480 resolution..22:34
invokertried to install kernel 3.9, unity not working!!22:34
Dr_willisidname,  run the nvidia-settings tool and see what res's it lets you change to. also its best to stick to the drivers in the repos22:34
lixAlexTheRealOne: are you on ethernet connection now?22:34
AlexTheRealOnelix, no still wlan but now its seems like the connection works well apt-get update works22:35
idnameDr_willis: You do not appear to be using the NVIDIA X driver.  Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.22:35
Dr_willisidname,  you dont seem to have installed the drivers correctly. or havent rebooted after installing them .22:35
lixAlexTheRealOne: cool. now use in the terminal: "sudo apt-get upgrade"22:35
idnameDr_willis: i did a reboot22:35
AlexTheRealOnelix, im on it22:35
lixAlexTheRealOne: great22:35
Azrael_GodHow is everybody doing on this fine day?22:36
lixAlexTheRealOne: btw are you using 13.04?22:36
idnameDr_willis: can i just go back to my previous state?22:36
ballshow do I change open to single click22:36
AlexTheRealOnelix, update succesful or something sry for bad english and yes i use 13.0422:36
ballsinstead of double22:36
lixAzrael_God: great! \o/ - you?22:36
UndrWateri have put an 11.10 image on an ARM device, but having difficulties figuring out how to do admin stuff...sudo asks for the guest password...i've asked in #ubuntu-arm, but it's quite quiet there22:36
idnameDr_willis: the thing is i have a hybrid gpu22:36
Dr_willisidname,  I never use the nvidia .run drivers.. I think they have an Uninstall option22:36
lixAlexTheRealOne: no problem. - what is your native language?22:36
AlexTheRealOnelix, german22:36
Dr_willisidname,  if its an OPTIMUS setup then you need to lookup and follow the guides for 'bumblebee'22:37
invokerguys... tried to install new 3.9 kernel in 13.04.... compiz was not working, reverted back to 3.0.8, unity doesn't work even now. any suggestions?22:37
lixAlexTheRealOne: ok, gut. dann kannst Du auch gerne auf Deutsch schreiben, obwohl es dafür einen anderen channel gibt.22:37
Dr_willisbbl. work time for me.22:37
idnameDr_willis: i think that i had an nvidia driver installed previous22:37
AlexTheRealOnelix, ? wie heißt der?22:37
=== jhirley_ is now known as jhirley
lixAlexTheRealOne: ich glaube #ubuntu-de22:37
lixAlexTheRealOne: ... oder so22:37
AlexTheRealOnelix, okay danke werd ich mal probieren aber schon mal danke für alles22:38
lixAlexTheRealOne: sehr gern...22:38
fyksentrism, hmm I have installed a couple of more dependences, but now I get that I'm missing libudev.so.0 but I have installed libudev1:i38622:38
lixAlexTheRealOne: und check mal noch die ubuntu compatibility seiten für Deinen Rechner22:38
AlexTheRealOnelix, Was ist das? sorry bin neu in sachen linux22:39
ctxmenihr seid ja deutsch22:39
lixAlexTheRealOne: kein problem. - dafür sind wir ja hier... ;)22:39
AlexTheRealOnelix, bin sonst immer so windows junkie22:39
lixAlexTheRealOne: es gibt webseiten die genauer beschreiben, auf welchen rechnern mit welchen komponenten ubuntu läuft22:39
Jacktanninthis channel supports english or is it just german?22:39
lixAlexTheRealOne: weil nicht für alle komponenten treiber existieren...22:40
OerHeksenglish only please.22:40
ubottuIn den meisten Ubuntu-Kanälen wird nur Englisch gesprochen. Für deutschsprachige Hilfe besuche bitte #ubuntu-de, #kubuntu-de, #edubuntu-de oder #ubuntu-at. Einfach "/join #ubuntu-de" eingeben. Danke für Dein Verständnis!22:40
ctxmengerman badasses22:40
lixJacktannin: dont worry. - its the english channel. but AlexTheRealOne did not know...22:40
Jacktanninim not racist, just confused22:40
Jacktanninerror while loading shared libraries: libcAudio.so: cannot open shared object file: No such file or directory22:40
Jacktanninanyone know how I get these libs22:40
Jacktanninon 13.0422:40
FloodBot1Jacktannin: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.22:40
AlexTheRealOnelix, kannst du mir ein link von geben? aber ich glaub schon das auf meinem rechner alles läuft gpu neuste driver intel-i7 ist auch normal und sound driver sind auch okay22:40
Jacktanninsorry floodbot22:40
yeats!de | AlexTheRealOne22:41
ubottuAlexTheRealOne: In den meisten Ubuntu-Kanälen wird nur Englisch gesprochen. Für deutschsprachige Hilfe besuche bitte #ubuntu-de, #kubuntu-de, #edubuntu-de oder #ubuntu-at. Einfach "/join #ubuntu-de" eingeben. Danke für Dein Verständnis!22:41
AlexTheRealOneokay sorry now i speak english22:41
Jacktanninim trying to get the libcaudio.so ironically when I try to google how to get these libs isntalled, i cant find guides even though prior google would help me... anyone know how?22:41
ballshow do I change open to single click22:42
Jacktanninopen what22:42
lixAlexTheRealOne: I have to leave. - you can find me l8er in irc. tschüss22:42
AlexTheRealOnelix, bb22:42
ballsa file22:42
ballsor folder22:42
ubottuLaunchpad bug 1050021 in autofs (Ubuntu) "autofs failed to mount .hidden" [High,Confirmed]22:43
=== jean is now known as Guest42572
AlexTheRealOneWhat u think is better 13.04 or 12.10?22:43
Awwin the file manager Open preferences then click Behavior, balls22:43
AwwYou're welcome :)22:44
ballswheres file manager22:44
Jacktannincan anyone help me how do I get libcaudio.so libraries installed?22:44
Jacktanninwhat year was your PC made AlexTheRealOne?22:44
Awwballs, its just called files so search for that in the dash22:44
OerHeksJacktannin, all i find is libcaudio in PPA' s , so what program do you have that uses own build libs?22:45
ballswill I get 32  or 64 bit ubuntu22:45
ballsim running in in vbox22:45
darthanubisno question22:45
Jacktanninsome crappy old game22:45
trismfyksen: ahh yes, 13.04 dropped libudev0 from the udev package build at version 20, this is the last version that had it: https://launchpad.net/ubuntu/raring/i386/libudev0/175-0ubuntu19 , you could attempt it as a workaround22:46
JacktanninI mean I downloaded libcaudio_2.1.0~ubuntu4.tar.gz seperately, would it be all I need?22:46
Jacktanninbut it says x8622:46
AlexTheRealOneJacktannin, http://www.toshiba.de/laptops/satellite/l850/satellite-l850-1vr/ here are some specs i dont really know what year22:47
AbdullahDeanAny tips how I can become a linux sys admin?22:48
fyksentrism, That did it! Thank you! :)22:48
Jacktanninah AMD graphics, not sure but I'd use 13.04 unless there are problems with its Radeon graphics.22:48
n0sqanyone know why my dell xps intermittently boots ubuntu 12.04 and 12.10? i get a blank screen then i have to power off with the power button - then i power up and get a menu to boot from22:49
id203how can i know what gpu iam using right now?i have hybrid22:49
jelly-homeAbdullahDean: spend 2-5 years learning how to manage 2-3 significantly different distributions (eg. Ubuntu LTS, RHEL and a source-based one like Gentoo thrown in for good measure).  Figure out which things they share, which are distro specific, and how to keep them up to date.22:50
jelly-homeThen switch to Debian and never have to use anything else.22:51
* jelly-home hides22:51
ballswhy is linux better than windows22:51
=== jhirley_ is now known as jhirley
AbdullahDeanwindows has too many viruses22:51
AlexTheRealOneStable, Fast, Secure balls22:51
ballscan you do anything in it22:52
ballsunlike windows22:52
ballssoftware wise22:52
jelly-homealso, learn that people who ask really dumb questions, do it to provoke a reaction rather than being that silly on accident22:52
ballsnot always no22:53
AlexTheRealOneAnyone know where i get Atheros WB225  drivers?22:54
=== puff` is now known as puff
foskyhey guys, I'm upgrading to Ubuntu 13.04 and it has been stuck on "Setting up samba-common" for ages now22:56
darthanubisstart over22:56
=== jhirley_ is now known as jhirley
ntzrmtthihu777hullo. anyone aware of a way to test x11 cursor animations?22:57
warzhi all. does anybody know if there's such thing as a light weight command-line adobe flash player? im not even interested in seeing video, necesarilly. i just want it to consume the flash stream data, pretty much.22:59
AlexTheRealOnewhere i can see my drivers for wlan or gpu?22:59
llldinoAlexTheRealOne, Go to Software & Updates > Additional Drivers tab23:00
=== Betamax is now known as Guest3337
llldinoFrom the settings menu23:01
AlexTheRealOnellldino, thanks23:01
DX099how can I get list of startup services ?23:03
DX099the graphical manager only list a few23:03
ntzrmtthihu777DX099: there is a sed command that will do it, not sure what it was, will have a look for you.23:04
woutersimons@DX099 command " initctl list "23:04
ntzrmtthihu777woutersimons: I think he's interested in doing it via the gui.23:06
DX099woutersimons, thanks23:06
rollif ubuntu was installed with dhcp, and i want to switch to using a static ip, say, in ubuntu server (no gui), how would i go about this (permanent as well, not having to do it each time i boot up)23:06
DX099but it's weird there's no default GUI utility to manage something so critical...23:06
ntzrmtthihu777DX099: sudo sed -i "s/NoDisplay=true/NoDisplay=false/g" /etc/xdg/autostart/*.desktop will reveal them in the gui23:07
nafg_Hi, I'm on the newest kubuntu and I'm getting a weird behavior.23:07
nafg_As I move the mouse pointer (synaptics touchpad), it suddenly goes back to where it was a moment ago.23:07
nafg_So I'm sliding left to right and the pointer is halfway across the screen when it suddenly is still only 1/3 of the way across23:07
nafg_maybe I'm just in a time warp23:07
darthanubisroll, #ubuntu-server23:07
llldinoroll, You can set up your router to assign a static ip23:07
rollllldino: the dhcp server is set to permanently assign an ip, but i'd like to, on the server side, _pick_ an ip23:07
rolldarthanubis: thanks23:08
DX099ntzrmtthihu777, ok. Thanks. And how with initctl can I stop one of them from spawning at boot again ?23:08
darthanubisroll, np23:08
ballsit wont contunue the install setup23:09
llldinoOk guys here I go again: I can't boot unless i'm in nosetmode, I updated my nvidia gfoce9400m drivers from Xorg, what do I do?23:09
ballsim at the choose username screen23:09
=== jhirley_ is now known as jhirley
ballsiI have to have a password23:09
darthanubisballs, sounds like your hardware23:10
darthanubisballs, what is your issue?23:10
ballsnothing nm23:10
ballsit didnt allow for blank passwords23:10
ballsdefo hardware23:11
BitwiseHello. What package do I need to install for qmake?23:11
ballsit was my tape drive23:11
ballsknew it23:11
=== tjbiddle_ is now known as tjbiddle
llldinoTape drive? Ghetto dude23:12
Irish_WolfHello All, anyone else have a problem with ubuntu 13.04 and their bluetooth mouse?23:12
llldinoIrish_Wolf,  I was having trouble with my keyboard23:13
llldinoIrish_Wolf,  Try shutting the app off and turning it back on23:13
Irish_WolfI've got a mac magic mouse (and I'm running ubuntu on a mac)23:13
Irish_Wolfllldino, I'll give it a whirl.23:13
DX099ntzrmtthihu777, I just saw that all jobs in "/etc/xdg/autostart" aren't actually ALL in the initctl list... It still misses some23:13
llldinoIrish_Wolf,  Kk, what kind of mac? Whats your GPU? Are you having trouble with it? I'm on a mac too23:14
nafg_Help, my mouse keeps jumping away23:15
llldinonafg_, Adjust settings23:15
nafg_llldino: It's not the settings. Usually it jumps backwards.23:15
nafg_Like it forgot about the last 1/10 seconds23:16
llldinonafg_, Should be in Settings > Mouse/Trackpad, try changing acceleration/sensitivity23:16
nafg_llldino: How would that make it go back in time so to speak?23:16
nafg_It's not sensitivity or acceleration.23:17
nafg_It's erratic behavior.23:17
nafg_And erroneous :)23:17
llldinonafg_, Well ok then, try shutting it off/unplug then turn it back on23:17
nafg_llldino: I've shut down the computer since it began. (It's a laptop synaptics touchpad)23:18
AlexTheRealOneneed help wireshark can't see my wlan device23:18
llldinonafg_, Oh you should have said so23:18
nafg_llldino: Sorry.23:18
nafg_Also I should mention that it's since the upgrade to kubuntu 13.0423:18
llldinonafg_, There's a way to adjust pressure sensitivy, I would just google it23:18
brian____Is there a typical reason why 'lsusb -t' would return "No such file or directory"?  It does it now when I insert a usb wifi dongle23:18
llldinonafg_, I forget the cmds, something do do with xlist though23:18
nafg_llldino: NOt sure how explain better, but I can't see how it's connected to pressure.23:18
nafg_It's like the computer has amnesia23:19
nafg_I should take a video screenshot.23:19
llldinonafg_, Yes, yes you should23:19
AlexTheRealOneDamn 13.04....12.10 was better23:19
darthanubislooks that way23:19
nafg_llldino: What's the easiest way to do that?23:19
ntzrmtthihu777AlexTheRealOne: and 12.04 better than that. lts is the way to go23:19
llldinoAlexTheRealOne, Did you install nonfree packages?23:20
darthanubisbroke my hdtv connection23:20
darthanubisno client nfs mounts23:20
llldinonafg_, No idea. VLC probably does it23:20
AlexTheRealOneI think i downgrade to 12.04 again23:20
llldinoAlexTheRealOne, Im thinking about it myself23:20
darthanubisunity is faster23:20
ntzrmtthihu777and xfce is damn nice :P23:21
AlexTheRealOnellldino, yeah okay i start downloading it right now23:21
darthanubisi'm not reinstalling23:21
llldinoAlexTheRealOne, Idk, The performance of raring is way better, i mean of course its going to be buggy it just came out23:21
nafg_AlexTheRealOne, llldino, truth is I've heard enough times not to upgrade until it's been out long enough for them to fix the inevitable bugs23:22
darthanubis13.04.1 how long?23:22
DX099darthanubis, isn't it possible to just update 12.10 unity to 13.04 version ?23:22
nafg_DX099: It is, check out omgubuntu23:22
nafg_IIRC they have instructions23:22
AlexTheRealOneokay downgrade see u all later23:22
llldinonafg_, Meh, might as well do my part what with that bug reporting23:22
DX099OK, thanks23:22
ballsubuntu install talking a while23:22
darthanubisDX099, sure, if there is a repo for it23:23
DX099is compiling Unity worth it ?23:23
ballscan you speed it up23:23
DX099Is there really any gain if you just compile for your system ?23:24
darthanubis10 years ago I would have23:24
bourke_what's the best way to get a pidgin indicator in 13.04?23:24
darthanubisI don't have the time nor interest to compile anything23:24
* r00t-err0r > /dev/null goodnight2>&all123:24
darthanubisHence my use of Ubuntu23:24
darthanubisbourke_, don't need one23:25
darthanubisbourke_, it's build in23:25
DX099darthanubis, Ok, but have you heard any feedback about it ?23:25
llldinoOk guys here I go again: I can't boot unless i'm in nosetmode, I updated my nvidia gfoce9400m drivers from Xorg, what can I do?23:25
darthanubisbourke_, if not install it23:25
darthanubisDX099, what are you talking about?23:26
bourke_darthanubis: I dont want the ubuntu messaging indicator, just the stock pidgin one23:26
DX099darthanubis, building unity23:26
sduncandoes anyone have advice for dealing with blank screen issues running 12.04 on a macbook pro 6,2?23:26
llldinosduncan, On boot?23:27
sduncanllldino, yes23:27
llldinosduncan, I'm having the same issue23:27
=== themhz is now known as themhz_away
sduncanllldino, i'm able to get recovery console up, trying a manual startx, but just getting a blank screen23:27
llldinosduncan, You can boot in nosetmode temporarily23:27
llldinosduncan, What's your GPU?23:28
DX099anyway, thanks for advices23:28
sduncanllldino, nvidia 330M iirc23:28
ballsinstall is going slow23:29
llldinosduncan, Seems to be a nvidia issue, I have a 9400m myself23:29
bernardoHey guys! I upgraded from 12.10 to 13.04 a couple days ago and when I restarted Unity wasn't there anymore! I believe it's related to my nvidia card with optimus. Does anyone here have a clue on how to fix it?23:29
=== jhirley_ is now known as jhirley
=== tjbiddle_ is now known as tjbiddle
sduncanllldino, are you running 32 or 64 bit?23:29
llldinosduncan,  6423:29
sduncannosetmode just gives me an empty purple screen (as it has done all day)23:30
llldinosduncan, It was working fine until this morning, Now I have to boot like 20 times for it to work23:30
wilee-nilee!help > balls23:30
ubottuballs, please see my private message23:30
llldinosduncan, Really? Do you have anything plugged into PCI/USB ports?23:30
sduncanjust a mouse llldino23:31
ballsmy install is going slow23:31
yeatsbernardo: if you create a new user, does unity appear for that users?23:31
llldinosduncan, Maybe try unplugging and running again23:31
ballsis there something wrong?23:31
bernardoyeats: That's a good question, haven't tried this yet23:31
sduncanllldino, will give it a shot23:31
bernardoyeats: Should I give it a shot now?23:31
SaGGyUndieSSaGGyUndieS: does SaGGyUndieS  help yer balls ?23:31
yeatsbernardo: I would, yes23:31
bernardoyeats: Ok, brb23:31
sduncanllldino, i've also noticed enabling networking in recovery takes a looooong time. dunno if that's expected or not23:31
wilee-nileeyeats, same desktops23:32
llldinosduncan, Recovery won't boot for me23:32
yeatswilee-nilee: eh?23:32
llldinosduncan, I even had trouble getting a cd to boot23:32
SaGGyUndieSballs: needs SaGGyUndieS23:32
sduncanllldino, yeah i've never had this much trouble23:32
wilee-nileeyeats, HehI thought you were asking my mistake.23:32
yeatswilee-nilee: no prob ;-)23:33
guest-OGlhpByeats: I'm on a guest section now and it worked! Is there a way to fix that for my regular user?23:33
ballswilee-nilee it dosnt seem to make a difference23:33
llldinosduncan, Same, I'm thinking about going back to lts but that would make 4 fresh installs in 2 days23:33
balls55 of 11723:33
yeatsguest-OGlhpB: I would consider moving your /home/yourusername directory to /home/yourusername.old and try logging in again - you can then move files back over to the newly created /home23:34
ThePiousPriest1so my unity taskbar on the side and top is gone after upgrading the kernel to 3.9 and ugrading ubuntu to 13.04 running nvidia 313 drivers, any suggestions?23:34
wilee-nileeThePiousPriest1, Where did you get the nvidia 319?23:34
guest-OGlhpByeats: Ok, I'll try that then. Thanks!23:35
ballsi think the install has froze23:35
wilee-nilee313 doh*23:35
ballswhat to do23:35
ThePiousPriest1from the actual software update menu within ubuntu23:35
SaGGyUndieSballs: heat them up23:35
wilee-nileeThePiousPriest1, That a stock kernel and drivers?23:35
harrisis the iron browser good23:36
llldinoGuys, If I go back to 12.04 will new versions of programs not work?23:36
JoseeAntonioRharris: what do you mean by the iron browser?23:36
ThePiousPriest1just went to the ubuntu ftp site and downloaded the latest kernel release,even tried that with stock xorg drivers23:36
ThePiousPriest1what's the command to verify the kernel again? uanme?23:37
harristhe browser the based on chrome23:38
ThePiousPriest1back, sorry23:38
Loshkillldino: there's no guarantee new versions will work on older releases. Something you can't live without in 12.04?23:38
JoseeAntonioRThePiousPriest1: uname -a23:38
ThePiousPriest1gonna have to sign in and out of pidgin to do this, brb23:38
=== jhirley_ is now known as jhirley
llldinoLoshki, Maybe, I play alot of OpenTTD and i'd be real angry if 1.3 didn't work23:38
JoseeAntonioRharris: as far as I know, there is no browser based on chrome.  if you could please give us the full name, that would help us.23:38
wilee-nileeharris, last release in January based on chromium, can you not try it and decide for yourself.23:38
OerHeksharris iron browser is just a chromium fork, not included in the repo's.23:39
harrisdoes anyone know where to download it23:39
ThePiousPriest1back,  3.9.0-030900-generic #201304291257 SMP Mon Apr 29 16:58:15 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux23:39
ThePiousPriest1basically, I am just trying to get my unity taskbar to come back up gain as well as the taskbar at the top which has time, network settings, etc.23:40
JoseeAntonioRharris: a simple google search for 'chrome download' would give you this as a result: http://www.google.com/chrome/23:40
OerHeksharris no idea if it is still maintained.23:40
harrisno not chrome23:40
JoseeAntonioRThePiousPriest1: so, you're saying you have no launcher, panel, or unity stuff?23:40
harrismy dad has the protable23:40
Loshkillldino: bear in mind I know nothing of openttd, but I did find: http://www.ubuntuupdates.org/package/getdeb_games/precise/games/getdeb/openttd23:40
ThePiousPriest1tried going through the terminal to reset unity, etc.23:41
JoseeAntonioRThePiousPriest1: so, you have tried running 'unity' on a terminal23:41
llldinoLoshki, Yeah, will it work in 12.04? thats the question23:41
JoseeAntonioRharris: same, a simple google search for 'chromium download' would give this as a result: http://www.chromium.org/getting-involved/download-chromium23:41
JoseeAntonioRThePiousPriest1: unity23:41
ThePiousPriest1just straight unity? alright gonna drop out to try that23:41
AlexTheRealOnellldino, do u know if i can downgrade ubuntu from 13.04 to 12.04? Downloading the iso for 12.04 slow internet...23:42
ThePiousPriest1got a bunch of output, not sure what that means23:42
ThePiousPriest1need to probably send this to a text file and get it somewhere23:42
OerHeksAlexTheRealOne, no, downgrade = reinstall23:43
llldinoAlexTheRealOne, I think downloading is the only way23:43
JoseeAntonioRThePiousPriest1: please, use paste.ubuntu.com23:43
AlexTheRealOnellldino, OerHeks hmm okay thx have to wait23:43
Loshkillldino: take another look. That page seems to contain info about a ppa of openttd version 1.3 something for 12.0423:43
llldinoAlexTheRealOne, Connect via Ethernet cable23:44
ThePiousPriest1so it would be unity > /xxxx/xxx?23:44
AlexTheRealOnellldino, that wouldn't speed it up23:44
JoseeAntonioRThePiousPriest1: wait a min23:44
llldinoAlexTheRealOne, Yeah it would23:45
llldinoAlexTheRealOne, Maybe not much, but it would23:45
=== jhirley__ is now known as jhirley
AlexTheRealOnellldino, nahh maybe just 1mb not more....can i download it faster? downloading it through terminal23:46
ballshi, I downloaded ubuntu 12.4 iso and mounted it, tried installing in a virtualbox, the installer freezes at "retrieving file 55 out of 113, how can I troubleshoot it please?"23:46
ballsubuntu 13.4*23:46
llldinoAlexTheRealOne, Torrent?23:46
AlexTheRealOnellldino, Torrent on linux?23:46
llldinoAlexTheRealOne, Yeah23:47
OerHeksballs, that would be updates, wait for it to finish or skip this step23:47
LoshkiAlexTheRealOne: Also, consider minimal cd install -- https://help.ubuntu.com/community/Installation/MinimalCD23:47
AlexTheRealOnellldino, and what should i take for programm on linux? is there something like utorrent?23:47
JoseeAntonioRThePiousPriest1: try 'sudo apt-get install pastebinit' and then 'unity | pastebinit' with no quotes23:47
ballshow to skip it23:47
llldinoAlexTheRealOne, Transmission should already be installed23:48
JoseeAntonioRballs: have you MD5 chacked the file?23:48
OerHeksballs, updates would only work, if you have set bridged to the etehernet adaptor in vbox-settings23:48
arduino_mani Love UBUNTU !23:48
AlexTheRealOnellldino, oh cool thx search for torrent of ubuntu 12.0423:48
ubottuTo verify your Ubuntu ISO image (or other files for which an MD5 checksum is provided), see http://help.ubuntu.com/community/HowToMD5SUM or http://www.linuxquestions.org/linux/answers/LQ_ISO/Checking_the_md5sum_in_Windows23:49
gryballs, ^^^23:49
JoseeAntonioRthanks, gry23:49
samskiterhi. i cant suspend my laptop to ram23:50
ballsim in mac OSX23:50
grysamskiter: yes, 'standby' does it23:50
samskitergry: what do you mean?23:51
JoseeAntonioRsamskiter: the command in 13.04 is called suspend, should be the same in other verions23:51
samskiterJoseeAntonioR:  i mean i have an erro when i try23:51
gryballs, https://help.ubuntu.com/community/HowToMD5SUM#MD5SUM_on_Mac_OS_X23:51
llldinosamskiter, I'm having the same issue, are you suing a mac?23:51
JoseeAntonioRsam113101: what is the error?23:51
JoseeAntonioRoops, sorry sam11310123:51
samskiterim using an asus laptop no23:51
grysamskiter, 'standby' suspends your laptop to ram23:51
samskitergry: this is not my issue. when i try it doesnt work23:52
grywhat does it do instead of working?23:52
ThePiousPriest1bah, this is getting really frusterating23:53
ThePiousPriest1pidgin went down on me23:53
samskitersometimes it birefly shows a black screen before returning to a locked screen, and i can log in. other times i see something about neuvaeuoeou failing. the last 2 times, it has returned me to a locked screen. i log in and then my taskbar has dissapeared (im using kde)23:53
ThePiousPriest1tried to boot into recvoery mode and restore missing packages, no go23:53
samskiteri think i have graphics card issues, but ive no idea how to fix them :'(23:53
llldinosamskiter, Let me guess, nvidia graphics card?23:54
samskiterllldino: yup23:54
WXZ1I need to group similar windows, tile them, maximize all of them... and minimize them. So far, I have no way of doing this23:54
llldinosamskiter, Yeah Im having issues with it too23:54
samskiterllldino: is linux basically broken for computers using nvidia?23:54
llldinosamskiter, I wouldn't go as far to say that23:54
llldinosamskiter, But it basically is for me23:55
samskiterllldino: oh dear. one day....23:55
samskiterllldino: i think i had suspend working in the past though. it wasnt great, sometimes it would take a few tries.23:55
llldinosamskiter, It worked fine for me in 12.1023:55
samskiterllldino: but now if i log back in after it fails, my session is basically fucked23:55
samskiterllldino:  yea23:55
ThePiousPriest1can't even copy text output properly23:56
samskiteri wish i hadnt updated to 13.04 but i didnt even know that that was what i was doing :S23:56
llldinosamskiter, Have you updated drivers?23:56
samskiterllldino: i presume it was done automatically23:56
llldinoNever presume nothing, lol23:56
samskitermuon software updater says theyre are no updates so i guess its don?23:56
ballsthere is no md5 checksum option23:56
samskiterllldino: i have to presume everything about linux.23:57
llldinoNot nessicarily, drivers are usually proprietary and software update doesnt support that23:57
samskiterllldino: its so hard to know how to check eveyrthing23:57
ThePiousPriest1so with this taskbar being missing, what are the possible culprits with the 13.04 update, 3.9 kernel update and the nvidia drivers?23:57
samskiterThePiousPriest1: are you talking to me?23:57
ThePiousPriest1Anyone really23:57
=== jhirley__ is now known as jhirley
samskiteroh, have others seen this issue?23:57
samskiteris it happening on ubuntu aswell?23:58
llldinosamskiter, Yeah ik, Go to Settings > Software & Updates > Additional Drivers tab23:58
ThePiousPriest1can't even really PM anyone, had to open pidgin from terminal23:58
ThePiousPriest1lucky just to get gc23:58
samskiterbtw. has unity changes with 13.04? is it any better?23:58
gryballs: howdy.23:58
samskiterllldino: im runnin kde, but i installed ubuntu first. so i have a mish mash of ubuntu and kde programs. i have no idea what to use for updates on kde23:59
samskiterllldino: except that i think i have to use muon23:59
llldinosamskiter, Yeah ik, Go to Settings > Software & Updates > Additional Drivers tab23:59

Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!