[00:00] <syntroPi> wildwind, that dvblast was quite a nice tip, now i can stream all channels from one bouquet (same frequency) as multicast to my lan :))
[00:00] <wildwind> moses_: do you have another Ubuntu machine in your network to test with?
[00:01] <moses_> i do not
[00:01] <binBlob> I am getting randomly this error in my concole: ERROR     Error executing hooks: 'NoneType' object has no attribute '__getitem__'
[00:01] <binBlob> wth is that ?
[00:02] <binBlob> kk have it figured out!
[00:03] <wildwind> moses_: ok let's test it locally with sftp command in terminal
[00:03] <moses_> wait
[00:03] <moses_> wildwind:
[00:03] <moses_> actually I would like to make a directory and give everyone full access to it
[00:04] <wildwind> so what's the problem with it
[00:06] <ibo> hi! to all
[00:08] <ibo> i have a problem with the keyboard some of the cracters are not in they re places, spanish keyboard asus eeepc 1001px
[00:08] <reddeath68> When I run the command 'sudo modprobe ndiswrapper' in ubuntu 13.04 x86 i get the following output 'ERROR: could not insert 'ndiswrapper': Exec format error     any ideas how I can remedy this problem?
[00:09] <moses_> how do you give read/write full access to a folder?
[00:09] <moses_> what man page do i need to look up to learn this
[00:10] <betrayd> !permissions | moses_
[00:11] <Dr_willis> chown/chmod basics.
[00:13] <zerai> hello everyone. What is the font I need for chinese fonts from command line?
[00:13] <zerai> (and the package name)
[00:17] <betrayd> zerai why not try apt-cache search searchterm, replace searchterm with your own, that might gie you a good lead
[00:20] <Qbrt> Hello
[00:22] <zerai> betrayd, I've been searching. and having no luck. it's supposed to be GBK 32 for the font, but I can't find it
[00:22] <Crono95> Bello
[00:22] <Crono95> Hello*
[00:23] <Qbrt> wazzup?
[00:23] <Crono95> Nada, u?
[00:23] <Qbrt> wut u meen nada?
[00:23] <ibo> nothing in spanish
[00:23] <Qbrt> ah, ok
[00:24] <Crono95> Means... Nothing
[00:24] <Qbrt> u speek spanish?
[00:24] <ibo> yes i do
[00:24] <Crono95> Bah
[00:24] <Crono95> Not really
[00:25] <Qbrt> ah speek spanish: mi mama me mima
[00:25] <Qbrt> ese oso se asea
[00:25] <Crono95> LOL
[00:25] <Dr_willis> Nacho Grande Por favore... :)
[00:25] <ibo> lol
[00:25] <betrayd> zerai your search term is what, maybe too specific
[00:26] <puff> I resized a partition and then on bootup ubuntu told me there were "serious errors" with the partition.
[00:26] <Crono95> In chatting from my phone so excuse the errors...
[00:26] <puff> So I left it unmounted and finished booting... how do I check on what happened?
[00:26] <Qbrt> tacos con salsa picante
[00:27] <binBlob> s1 familiar with bittorrent sync in here ?
[00:27] <inspiron3> can anyone help me w/ my headphone jack not working after some update ran for 12.04LTS
[00:27] <surfdaemon> binBlob: i've used it
[00:27] <sere> 23223
[00:27] <ugly_duck> hiya, i'm playing an online flash game, i've been asked to run windows xdiags to send them the output, what is the ubuntu equivilent?
[00:28] <binBlob> surfdaemon: how do i connect 2 linux machines through the minimal web gui ??
[00:28] <Qbrt> is anyone working with ubuntu studio here?
[00:28] <surfdaemon> binBlob: create the secret for the folder on one machine, and then on the second machine paste that secret into the box for the secret when adding the folder.
[00:29] <zerai> betrayd, apt-cache search gbk / apt-cache search chinese
[00:29] <ibo> inspirion3 wich kind of computer are u using_
[00:29] <ibo> ?
[00:29] <betrayd> zerai also try language?
[00:29] <OerHeks> Qbrt, there is an #ubuntu-studio channel
[00:30] <inspiron3> @ibo dell e1505...   dont know the exact inspiron model number
[00:30] <inspiron3> its an old laptop
[00:30] <betrayd> oh and the cn channel...
[00:30] <inspiron3> @ibo updates ran, broke sound, at the time, I thought I did it... so I reinstalled the OS... same issue.
[00:30] <betrayd> !cn
[00:31] <surfdaemon> binBlob: I'm using the config files though.  Was easier for me to work out the config once and copy it to other machines, not opening up a webgui for all of them.
[00:31] <ibo> i had problems with the internal microphone with an asus eeepc 1001px with 10.04 ubuntu
[00:31] <inspiron3> @ibo speakers work fine, I watch the sound settings, when I plugin headphones, I see it switch, but theres no sound
[00:31] <binBlob> surfdaemon: buhh I am so lazy that I want to configure this out over the gui ;/
[00:32] <ibo> and i did compiled the last kernel stable
[00:32] <zerai> betrayd, brings up a LOT of results, having nothing to do with fonts
[00:32] <inspiron3> so I saw some forum posts about the asus, but I didn't know what I need to do for the dell
[00:32] <binBlob> surfdaemon: the gui dont seem to have a add folder option
[00:32] <ibo>  and did work, but my webcam then wasn-t working the webcam
[00:32] <zerai> betrayd, I don't speak chinese, some of the programs I use are coded in chinese though
[00:34] <ibo> so with the 12.04 now is runing everything
[00:35] <ibo> so might be the kernel if at the gurb they may put a option to run it with the old kernel if i-m not wrong
[00:35] <ibo> so run it with the new
[00:35] <surfdaemon> binBlob: I see it on mine, it was a button on the localhost:8888/gui/
[00:35] <inspiron3> downgrade the kernel you're saying?
[00:36] <ibo> u did and upgrade of the 10 t0 12 right?
[00:37] <inspiron3> fresh install of 12.04 today
[00:38] <ibo> okay don-t know, might be working if compile the last kernel stable, just an idea, does someone a better answer?
[00:39] <WeThePeople> how do i cd to the network?
[00:40] <binBlob> surfdaemon: ahh now i've got it, its for sharing and reciving
[00:41] <betrayd> zerai no i mean use the searchterm 'language'
[00:43] <binBlob> kk I'm out bb everyone
[00:48] <wildwind> WeThePeople: explain please what you mean
[00:49] <Fudge> anyone have experience creating meta packages, have two packages that wont install, could be because they are in universe?
[00:49] <WeThePeople> wildwind, i dual boot win8 x64 and ubuntu 12.04.4 x64, in the network dir. there are windows file sharing devices 'connected' to my computer that i do not want there, i am trying to remove them
[00:51] <wildwind> WeThePeople: what the network dir?
[00:51] <WeThePeople> and nautilus says it cant handle network///
[00:51] <WeThePeople> yes
[00:52] <wildwind> WeThePeople: ah Nautilus
[00:52] <WeThePeople> ubuntu is picking up those devices from windows
[00:52] <Dr_willis> WeThePeople,  what service is ot accessing? Samba? if so  its   smb://servername/   (or ip#)
[00:52] <tones>  ubuntu phone is coming ubuntu phone is coming
[00:52] <Dr_willis> smb://servernameorip/sharename
[00:52] <surfdaemon> tones: when?
[00:52] <WeThePeople> dr_willis, thanks
[00:52] <Dr_willis> tones,  i will belive it when i see it in the stores.
[00:52] <surfdaemon> I'll believe it when it's in my cold dead hand.
[00:53] <wildwind> WeThePeople: where do you see them then, if Nautilus can't open it?
[00:53] <Dr_willis> WeThePeople,  the network:// i think is like special location that scans all the network. but i cant recall ever using it.
[00:53] <Dr_willis> WeThePeople,  you can also mount samba shares by hand to a local directroy
[00:53] <tones> was just watching the youtube videos of the phone, interface looks good
[00:54] <WeThePeople> wildwind, gksudo cant handle it
[00:54] <WeThePeople> it is smb
[00:54] <Dr_willis> tones,  personally i was not that impressed.. but it will be some time i imagine befor you can actually get a device like it from a major carrier.
[00:54] <Dr_willis> WeThePeople,  if you ran nautilus  with gksudo. it may be trying to access the shares as  the 'root' user. not your normal user name.
[00:55] <WeThePeople> thats it then
[00:55] <Dr_willis> i cant see any reason to try to access samba shares as root. ;)
[00:56] <Quest> how to tcpdum whois somedomain.com ?
[00:57] <wildwind> Quest: run tcpdump in one terminal and whois in another
[00:58] <Quest> wildwind,  $ tcpdump eth0
[00:58] <Quest> tcpdump: no suitable device found
[00:58] <Dr_willis> ifconfig should show what devices are there
[00:59] <wildwind> Quest: -i eth0
[01:00] <puff> Anybody know more about this "serious errors found" on disk check?
[01:00] <puff> wildwind: try "ifconfig -a" to list all devices.
[01:01] <Dr_willis> puff,  could be you need to fsck the filesystem from a live cd.
[01:01] <Quest> hx wildwind
[01:09] <puff> Dr_willis: It's unmounted now (it's my bulk data partition). Any particular reason I need to fsck it from a live partition instead of from the regular shell?
[01:10] <wildwind> puff: anything interesting in logs?
[01:15] <puff> wildwind: Not that I can tell, but I'm not sure where to look.
[01:16] <puff> wildwind: The partition is on /dev/sda4, so I grepped /var/log for sda4, only got a few lines and nothing obviously wrong.
[01:16] <puff> Ah, boot.log...
[01:17] <puff> http://paste.ubuntu.com/5705366/
[01:18] <tones> in ubuntu 10.04 I'm not able to install the google voice download through gmai, using ff or chrome, the button won't click googled it, nada
[01:18] <tones> gmai gmail
[01:19] <Gnea> tones: why use 10.04 still?
[01:19] <tones>  Gnea, cuz I tried unetbootin with 12 and it wouldnt boot
[01:19] <puff> Hm, so it says "the filesystem size (according to the superblock) is 85817856 blocks\n The physical size of the device is 85817825 blocks.\n  Either the superblock or the partition table is likely to be corrupt."
[01:20] <tones> on a usb
[01:20] <tones> and 13, when I click on a unity panel, screen freezes in pixilation
[01:20] <tones> and 10 is smooth
[01:20] <Gnea> tones: 12.04 or 12.10 is what you tried?
[01:20] <tones> 12.04 unetbootin usb
[01:21] <Gnea> tones: old hardware?
[01:21] <puff> This is almost certainly because I use the centos installer to shrink that partition.
[01:21] <tones> athlon yes
[01:21] <Gnea> tones: okay, so what is this 'google voice' thing you're trying to install?
[01:21] <Gnea> tones: I know what google voice is, I just don't understand what sort of integration you're trying to achieve
[01:22] <zerai> question: If a font for a foreign language is installed, and should be workign but is not, is there any way to set that locale in an sh file so that program runs with that locale?
[01:22] <tones> http://www.google.com/intl/en/chat/voice/
[01:22] <wildwind> puff: soryy, have to go now, but i'd take the suggestion and run fsck again
[01:22] <tones> I can't click on that and install
[01:22] <puff> wildwind: Thanks.
[01:23] <Dr_willis> tones,  download the .deb and sudo gdebi foo.deb   perhaps?
[01:23] <LinuxNewbie> hello, is there any way to find what files are contained in a package and where those files will be installed ?
[01:23] <Gnea> tones: neither can I. Hrm.
[01:23] <LinuxNewbie> before apt-get install package-name
[01:23] <wildwind> puff: take a dd backup before, if you have enough space
[01:23] <Dr_willis> LinuxNewbie,  the synaptic package manager shows what files are in the .deb/package in the details tab   also
[01:24] <LinuxNewbie> Dr_willis,  is there anyway not to use synaptic ?
[01:24] <Dr_willis> LinuxNewbie,  or download the .deb and look.   why does it matter?
[01:24] <xeviox_> Hey, a seemingly successful install of ubuntu 13.04 won't boot... I've never had this issue with any other version of ubuntu - anyone know what might be the culprit?
[01:25] <tones> Dr_willis, in the software center it says the deb and gdebi packages are already installed
[01:25] <LinuxNewbie> Dr_willis, just because i want to know what files a package contain before installing it and where those files will be placed ...ok ...i'll try to download a .deb and then look at it
[01:25] <rypervenche> LinuxNewbie: I believe there are ways to do it. I'm not sure with Debian-based distros though, I think there's apt-file(s)
[01:26] <wildwind> LinuxNewbie: apt-get download, then dpkg -L
[01:26] <rypervenche> LinuxNewbie: wildwind's way is faster though.
[01:26] <puff> wildwind: I don't have the space, but it's a bulk data partition, so most of what's on it should be recoverable by other means.
[01:26] <tones> synaptic package manager, gdebi installer and gdebi core are installed
[01:26] <puff> wildwind: e.g. re-ripping CDs, re-downloading tar files ore installers, etc.
[01:27] <tones> Gnea, what version are you using?
[01:27] <puff> Dr_willis: Can you suggest some good google search terms for this?
[01:27] <Gnea> tones: honestly, whenever I click on the 'call phone' button on the side of my gmail display, it brings up the dialing dialog
[01:27] <Gnea> tones: 12.04
[01:27] <tones> Gnea, but can you make a call?
[01:27] <LinuxNewbie> wildwind, dpgk -L it's useful if i have installed the package ...or at least this is what know so far...ty ...i'll have a look
[01:27] <Gnea> tones: so it 'just works'
[01:27] <Gnea> tones: sec
[01:27] <Gnea> tones: ah no, it takes me to the same link
[01:28] <tones> Gnea, same here, so what's the solution
[01:28] <rypervenche> LinuxNewbie: dpkg is for .deb files.
[01:28] <tones> I want to use google voice,
[01:28] <tones> but if you're on 12 that's not the issue
[01:28] <xeviox_> Hey, a seemingly successful install of ubuntu 13.04 won't boot... I've never had this issue with any other version of ubuntu - anyone know what might be the culprit? there's no UEFI entry in the bios could be the problem?
[01:28] <LinuxNewbie> rypervenche, ok ...ty
[01:29] <zerai> !repeat xeviox_
[01:29] <Dr_willis> xeviox_,  id try that boot-repair tool from a live cd and se eif it can straighten it out
[01:29] <Gnea> tones: I'm going to figure that out right now :-)
[01:29] <Dr_willis> !fixgrub
[01:29] <tones> Gnea, ok let  me know
[01:29] <zerai> lol I botched the command
[01:30] <xeviox_> Dr_willis, Already tried that - no avail I'm afraid
[01:30] <zerai> question: If a font for a foreign language is installed, and should be workign but is not, is there any way to set that locale in an sh file so that program runs with that locale?
[01:31] <Dr_willis> you can  do somthing like LOCALE=whatever  command
[01:31] <rypervenche> zerai: LANG=en_US.UTF-8
[01:31] <rypervenche> zerai: Change which the locale you want to use.
[01:31] <Dr_willis> or export the variable, then run the command
[01:32] <zerai> rypervenche, in the sh file?
[01:32] <rypervenche> zerai: Yep, which locale do you want to use?
[01:32] <zerai> rypervenche, so like.. set LANG=zh_CN.UTF-8
[01:32] <zerai> simplified chinese
[01:32] <rypervenche> zerai: If you want to use that locale throughout the entire script, go ahead and do "export LANG=zh_CN.UTF-8" at the beginning of the script.
[01:33] <zerai> ok, and then it will be normal for everything but that script?
[01:33] <rypervenche> Yep.
[01:33] <zerai> I'll give it a shot
[01:33] <zerai> and see if that works
[01:33] <rypervenche> zerai: PM me if it doesn't work. I know enough 中文 to get by to be able to help.
[01:35] <Gnea> tones: figured it out. someone made a ppa:  http://www.ubuntuupdates.org/ppa/google_talk_plugin
[01:36] <Pillock> just installed Plex Media Server how do I point it to the downloads folder on my laptop?
[01:36] <Gnea> tones: there's a button labeled "All versions of google-talkplugin'" that will take you to the 10.04 version
[01:36] <Gnea> tones: it has 32bit and 64bit
[01:36] <Pyru> Hi there. Installed the latest Ubuntu. I have an nvidia card, with bumblebee installed. Now is there a way to get the discrete GPU to run compize? Visual effects are "laggy", minimizing windows, opening the menu, etc.
[01:37] <Dr_willis> sounds lik eyour drivers may not be in use. or are goofed up.
[01:37] <Dr_willis> what is your specific cards? it may be you are not using the nvidia card
[01:37] <Gnea> tones: and yes, I just made a phone call with it.
[01:38] <Pyru> Dr_willis: I'm using a GeForce 600M GTX . optirun glxspheres, I get > 200 FPS
[01:38] <Pyru> 660M GTX* sorry
[01:39] <Gnea> tones: thanks! I didn't even know I had the same problem lol
[01:39] <Dr_willis> Pyru,  could be theres some trick to get the whole desktop to be on the nvidia card. I dont use  Bumblebee/that stuff..
[01:39] <xeviox_> Apparently it's a kernel bug with my motherboard, probably just going to stick with 12.10 then... good waste of a few hours I guess
[01:39] <Dr_willis> xeviox_,  theres the mainstream kernels you can try
[01:40] <xeviox_> Dr_willis, I'd be clueless trying to patch it, but thanks
[01:41] <Dr_willis> xeviox_,  patch? Hmm. I just started using the 3.9 kernel from the mainstream repos.  dident patch anything. it fixed a few issues i had.
[01:41] <tones> Gnea, it works now, yes, thank you :)
[01:41] <tones> another daily ubuntu nugget
[01:41] <xeviox_> Dr_willis, I'm not even able to boot in to the system though - so there's not an awful lot I can do, is there?
[01:42] <tones> Gnea, google voice gonna save me lots of prepaid minutes
[01:44] <surfdaemon> xeviox_: chroot?
[01:44] <Gnea> tones: :-)
[01:46] <tones> Gnea, what did you type into google to find that link, google talk plugin ubuntu doesnt show the link
[01:49] <music> vv
[01:49] <xeviox_> surfdaemon, i'll give it a go
[01:51] <tones> yes it does
[01:52] <djshotglass> i have a usb stick i would like to be able to boot from any of 3 isos
[01:52] <djshotglass> possible?
[01:52] <djshotglass> gparted, ubuntu, arch linux
[01:52] <Dr_willis> djshotglass,  grub2 can boot iso files from a USB drive - yes...
[01:52] <Dr_willis> its very possible.
[01:53] <Dr_willis> the Pendrivelinux site even has tools to do it for you
[01:53] <djshotglass> nice
[01:53] <tones> djshotglass, pendrivelinux yumi too
[01:53] <Dr_willis> you can slso setup grub2 on your installed system to boot iso files
[01:53] <puff> So how reliable is gparted for fixing this sort of stuff?
[01:53] <tones> for windows
[01:54] <Dr_willis> gparted is pretty much the main tool for messing with partions (in a gui way)
[01:54] <puff> boot.log (http://paste.ubuntu.com/5705366/) says "the filesystem size (according to the superblock) is 85817856 blocks\n The physical size of the device is 85817825 blocks.\n  Either the superblock or the partition table is likely to be corrupt."  This is almost certainly because I used the centos installer to shrink that partition.  Thinking of using gparted to fix it.
[01:55] <rypervenche> puff: It looks like you shrunk it too much.
[01:56] <Dr_willis> gparted should be able to fix it.
[01:57] <puff> Hm... I could swear I had more than 30GB of free space on that partition.
[01:57] <puff> But if I *did* shrink it too much, is there any way to recover/restore it?
[01:58] <Dr_willis> you might not have lost any data.. its just a  few blocks differance
[01:59] <rypervenche> puff: I would try to increase the size of the partition and then then file system.
[01:59] <echoe__> 30!
[02:01] <jgcampbell300> I have 10-15 ubuntu desktops and several ubuntu servers around 20 or so on my lan at home (mostly for testing) I would like to setup either a proxy or repo ... i was looking at apt-cacher but it requires changing the source list ... my question is does anyone know of a way to setup something to (for the lack of the proper term) cache all updates that are requested on the lan with out changeing the client computers ?
[02:02] <Dr_willis> apt-cacher-ng requires i think one extra file in the /etc/apt/config dirs
[02:02] <Dr_willis> ive used it on my home lan befor.. was rather easy to setup
[02:03] <Dr_willis> i doubt if theres going to be an easy way to 'force' all the updates from a lan machine  without changeing settings on each client
[02:04] <jgcampbell300> nice ill have to check it out ... thanks ... just really do not want to have to make changes to every build as i go throu a few builds a day some times
[02:04] <Dr_willis> i just seem to recall needing to cut/paste/add one file.  but its been a while
[02:04] <jgcampbell300> I was thinking there must be some way of adding dns options to point all updates going throu the router to a cache server
[02:05] <djshotglass> jgcampbell300 do you run a computer as a router?
[02:05] <djshotglass> squid cache would probably do it
[02:05] <djshotglass> packages are all http arent they?
[02:05] <jgcampbell300> djshotglass, yes
[02:06] <puff> jgcampbell300: you could always run a local DNS server and then have a machine that impersonates the main repos.
[02:06] <jgcampbell300> squid cache ... thats what i was reading on last time i had this thought ... thanks ... will be back in a few going to go do some reading
[02:06] <WeThePeople> how would i flipover and unreverse a stream from streamtuner2
[02:07] <syntroPi> http://en.wikipedia.org/wiki/Dnsmasq
[02:07] <DrFoo> can I have a host file with the same host name listed with multiple ips?
[02:08] <echoe__> Umm ... why?
[02:08] <Dr_willis> DrFoo,  yes i belive that can work.. a common trick is to 'ad block' some sites by pointing their hostname to 127.0.0.1
[02:08] <Dr_willis> or am i backwards in what you said?
[02:09] <Dr_willis> otherwise it made no sense. ;P
[02:09] <rypervenche> You did it backward.
[02:10] <puff> jgcampbell300: Oh, good point... you could just create a host file pointing the repo domain at some local server, and deploy that to all of your machines.
[02:10] <Dr_willis> the we have to wonder why.. ;P
[02:10] <DrFoo> Dr_willis: I want my home server to have multiple ip addresses in the hosts file
[02:10] <rypervenche> DrFoo: For what reason?
[02:10] <ThePendulum> Greetings
[02:11] <DrFoo> I would like to try the local private IP when I'm home, but when I'm remote, I'd like it to use the vpn ip
[02:11] <earl1> hello
[02:11] <Oddity> hi
[02:12] <ThePendulum> I have switched from FreeNAS to Ubuntu, but I need to recover my ZFS HDDS. I am now at the point where I have successfully mounted my zpool. However, the directories inside still aren't accessible (unrecognized filetype). Any assistance?
[02:12] <earl1> May I ask a question? I need help with iptables
[02:12] <Oddity> sure. you don't have to ask to ask.
[02:12] <echoe__> How about a subdomain?
[02:15] <earl1> when attempting to save a iptables config with "sudo iptables-save > /etc/iptables.rules" I get a "bash : /etc/iptables.rules: Permission denied" messeage
[02:15] <earl1> Do you know why?
[02:15] <earl1> Ubuntu 12.04 LTS
[02:15] <ThePendulum> earl1: Try to use sudo
[02:15] <earl1> I…did...
[02:16] <ThePendulum> earl1: Wait, you are
[02:16] <ThePendulum> My bad
[02:16] <earl1> lol
[02:16] <ThePendulum> Give me a break, it's 4:15am :P
[02:16] <earl1> This is most frustrating.
[02:16] <Dr_willis> you dont use sudo directly with >
[02:16] <earl1> 21:16, here.
[02:16] <Dr_willis> do a ''sudo -s' or you use 'tee' in the sudo command somehow i recall
[02:16] <ThePendulum> Anyway, no one on the ZFS pool? Otherwise I'm going to bed and ask again tomorrow.
[02:17] <earl1> "sudo -s" does the same
[02:17] <Dr_willis> if youi do sudo -s
[02:17] <Dr_willis> then from the root shell  do a  command > foo   it should  work. try it in your root home dir
[02:17] <earl1> I've been stumped all day. It worked before
[02:18] <earl1> :C
[02:18] <Dr_willis> I dont een know what output iptables-savbve does
[02:18] <OerHeks> sudo sh -c "iptables-save > /etc/iptables.rules"
[02:18] <OerHeks> https://help.ubuntu.com/community/IptablesHowTo
[02:18] <Dr_willis> iptables-save | vi     ;)
[02:18] <rypervenche> earl1: I personally log into root to do these types of things. "sudo -i" then run it, "iptables-save > /etc/iptables.rules"
[02:18] <earl1> I am in root
[02:19] <OerHeks> rypervenche + 1 within " "
[02:19] <Dr_willis> echo 'hello' > foo     as a test?
[02:20] <earl1> Permission denied
[02:20] <earl1> bash: foo: Permission denied
[02:20] <rypervenche> earl1: Type "whoami"
[02:20] <earl1> it displays my root account
[02:20] <earl1> namw
[02:20] <earl1> name*
[02:20] <rypervenche> earl1: Did you run that with sudo or without?
[02:20] <earl1> without
[02:21] <rypervenche> earl1: Ok, type "pwd"
[02:21] <Dr_willis>  the / is not mounted read only is it?
[02:21] <rypervenche> Probably is.
[02:21] <OerHeks> earl1, "WARNING: Iptables and NetworkManager can conflict. "
[02:22] <earl1> Mounted as read only?
[02:22] <earl1> How would I do that?
[02:22] <Dr_willis> see what the mount command says about it
[02:22] <Dr_willis> if the filesystem has issues.. it CAN get remounted read only
[02:22] <dr3mro> Hello , I have an issue with a package in ubuntu and I fix it by configure the source code and make but I wantbto make a package in ppa to friends how I change compile arguments on launchpad?
[02:22] <rypervenche> earl1: Just keep going, give us the output of "pwd" and also "mount | grep ro"
[02:23] <earl1> "pwd" returns "/etc/network"
[02:25] <djshotglass> jgcampbell300 make sure you set maximum_object_size 1024 MB
[02:25] <rypervenche> earl1: and the mount command?
[02:25] <djshotglass> and have a nice big drive on squid server
[02:25] <jgcampbell300> ya was just reading that ... and there are some problems with updateing to old updates
[02:27] <earl1> "sudo mount | grep ro" returns "/dev/sda2 on /type ext4 (rw,erros=remount-ro)" | proc on /proc type proc (rw,noexec,nosuid,nodev)
[02:27] <rypervenche> earl1: Why are you using sudo if you are already root?
[02:27] <earl1> habit
[02:27] <earl1> lol
[02:28] <Dr_willis> check mount command output for info on your '/' partition    seems odd it wasent mentioned in your optput above
[02:28] <earl1> Shall i try it without using sudo?
[02:28] <Dr_willis> oh wait.. it as a missing space...
[02:28] <earl1> How?
[02:28] <rypervenche> earl1: Ah ok, what does "ls -ld /etc/network" give you?
[02:28] <Dr_willis>  /dev/sda2 on  /       type ext4
[02:28] <Dr_willis> ;)
[02:29] <Dr_willis>   /  is mounted Read/write it seems
[02:30] <earl1> "ls -ld /etc/network" returns "ls cannot access etc/network: No such file or directory"
[02:31] <earl1> opps
[02:31] <rypervenche> earl1: You typed something incorrectly then. You told me that your pwd was "/etc/network". Are you missing an s?
[02:31] <earl1> i mean
[02:32] <earl1> drwxr-xr-x 6 root 4096 Aug  2012 /etc/network
[02:32] <rypervenche> earl1: and "ls -ld /etc" ?
[02:34] <earl1> drwxr-xr-x 127 root root 12288 May 26  2012 15:21 /etc
[02:34] <earl1> what do these sates mean?
[02:34] <earl1> dates*
[02:35] <rypervenche> earl1: You should be good there. You don't need to worry about the dates. It should be the modified time.
[02:35] <rypervenche> earl1: Try "cd /etc; touch testfile"
[02:36] <earl1> touch: cannot touch 'testfile': Permission denied
[02:36] <echoe__> Too hard to resist command name jokes. Real bad ones.
[02:37] <echoe__> Is etc supposed to have a sticky bit? Maybe its immutible
[02:37] <rypervenche> earl1: It sounds like your hard drive is read-only right now.
[02:37] <earl1> why would it be that?
[02:37] <rypervenche> I can't imagine that it would have the immutible bit on it or the sticky bit.
[02:37] <echoe__> Earl can you cd / touch testfile ?
[02:37] <rypervenche> I have seen a drive be read-only and not show up in mount that way.
[02:38] <echoe__> Rypervenche, true
[02:38] <rypervenche> dmesg could confirm it I suppose.
[02:38] <rypervenche> or /var/log/messages
[02:38] <rypervenche> Perhaps...
[02:38] <Dr_willis> filesystem could be messed up.. or his /etc/ is on a differnt partion.. that would be weird..
[02:38] <Dr_willis> or hes not root. ;) but he said he was
[02:38] <Dr_willis> touch /testfile
[02:39] <Dr_willis> touch /etc/testfile
[02:39] <Dr_willis> both 'should' work
[02:39] <earl1> I just installed it
[02:39] <rypervenche> earl1: Do "touch /testfile"
[02:39] <echoe__> That!
[02:40] <earl1> Permission denied
[02:40] <earl1> I'm a newb
[02:40] <Saiki> I am having a language issue with java, trying to use the zh_CN locale for a program but it isn't working for some reason, does anyone know how to check if this is in fact the problem?
[02:40] <earl1> I just installed this
[02:40] <echoe__> Doh.
[02:40] <rypervenche> earl1: Maybe try "dmesg | grep -i only"
[02:40] <earl1> Did I install it wrong?
[02:40] <echoe__> Earl what does your command prompt say
[02:40] <echoe__> Sudo touch /testfile ? :p
[02:41] <earl1> no return, echo
[02:41] <rypervenche> ...
[02:41] <rypervenche> You're not root then.
[02:41] <Saiki> earl1: try sudo chmod 755 <filename> && touch <filename>
[02:41] <echoe__> Lol.
[02:42] <rypervenche> earl1: The problem is that you are not root.
[02:42] <echoe__> :D
[02:43] <earl1> ryperven, [       1.512639] Write protecting the kernel read-only data: 12288k
[02:44] <rypervenche> earl1: Just use what someone else suggested. "sudo sh -c 'iptables-save > /etc/iptables.rules'" (without the double quotes)
[02:44] <dez82> hi all
[02:44] <earl1> hi
[02:45] <dez82> is anyone here running ringtail with an ATI video card?
[02:45] <earl1> ryper, Permission denied
[02:45] <dez82> ?
[02:45] <dez82> i need to ask about the proprietary driver
[02:46] <dez82> with unity
[02:46] <echoe__> So tempted to just say sudo -i
[02:46] <echoe__> But that is dangeroussss
[02:46] <Saiki> yea, try sudo -i
[02:46] <Saiki> echoe__, that's what "logout" is for :P
[02:47] <Dr_willis> echoe__,  more dangerous then messing with iptables and sudo > , and not understanding the basics of sudo? ;)
[02:47] <echoe__> Rm rf / logout?
[02:47] <echoe__> :p
[02:47] <earl1> I sudo -i'd
[02:47] <echoe__> Ah hell I was taught in root so I have no idea what is and isn't safe
[02:47] <earl1> says, root@<name>
[02:47] <echoe__> Root access for everything!!!
[02:48] <Dr_willis> now you are 'root' earl1  - be  carefull witbh root access
[02:48]  * rypervenche rolls eyes.
[02:48] <earl1> Wasn't I root before?
[02:48] <betrayd> thats why I have guake for
[02:48] <Saiki> no
[02:48] <Dr_willis> earl1,  aparently not...
[02:48] <earl1> Isn't default account root
[02:48] <Dr_willis> earl1,  'touch /testfile'  should work now.
[02:48] <earl1> ?
[02:48] <Dr_willis> earl1,  DEFINATLY NOT
[02:48] <Saiki> earl1, and to get out of root, simply type "log out"
[02:48] <Dr_willis> defqault account has SUDO RIGHTS.
[02:49] <Saiki> earl1, and to get out of root, simply type "logout"  *
[02:49] <earl1> or "exit"?
[02:49] <bity> dez82, i've ran it on my radeon
[02:49] <rypervenche> earl1: exit is fine, yes.
[02:49] <Dr_willis> logout = exit   i belive
[02:49] <bodom> Is there any tool to check actual file permissions against original packager's ones?
[02:49] <dez82> bity: with prop driver?
[02:49] <bity> idk it worked default
[02:49] <earl1> I never had this prob before
[02:50] <bity> i didnt do any gaming on it, but it worked
[02:50] <rypervenche> earl1: Now that you are root (root@<name>) you can run commands without any problems. You do not need to add "sudo" before any of the commands that you use.
[02:50] <Dr_willis> earl1,  then you have been doing somthing very weird befor...
[02:50] <Saiki> exit works on root?
[02:50] <Dr_willis> exit logs you out of the current shell
[02:50] <Saiki> I thought that was for somethingvery different
[02:50] <echoe__> Earl, you weren't root before. Welcome to the magical world of few restraints
[02:50] <earl1> what did the touch command do?
[02:50] <Dr_willis> whatever user you are looged in..
[02:51] <Dr_willis> earl1,  made a empty file as a test
[02:51] <echoe__> Touch makes a file.
[02:51] <rypervenche> earl1: It created an empty file in your / directory.
[02:51] <rypervenche> earl1: You can leave it there. I wouldn't advice removing it lol.
[02:52] <earl1> Y not?
[02:52] <rypervenche> earl1: Seeing your record you may end up removing more important files.
[02:52] <earl1> haha
[02:52] <earl1> I would be careful
[02:52] <rypervenche> earl1: But you can remove it with "rm -f /testfile"
[02:52] <Saiki> earl: if you mess up the command in "/" you can kill the entire OS
[02:53] <earl1> lol
[02:53] <earl1> I could reinstall
[02:53] <Dr_willis> or you could learn some shell basics...
[02:53] <Saiki> earl1: yes, you could go about things that way, learning things the hard way (hell, that's what I did..)
[02:53] <earl1> I know of a few
[02:54] <echoe__> Rm -rf to remove directories! Maybe all the directories!
[02:54] <earl1> Which is why i chose to work with iptables over a front end
[02:54] <rypervenche> echoe__: Yeah...teach him that. That's good.
[02:54] <echoe__> I never rm rf'd slash. I did move my root into a folder
[02:54] <earl1> srm 4tq
[02:54] <earl1> 4tw*
[02:54] <earl1> ftw*
[02:54] <echoe__> Ryper he can reinstall! Learning!
[02:54] <rypervenche> hahaha
[02:55] <echoe__> ... all I ate today was donuts. I am a little sugarrush-y.
[02:55] <earl1> I have the book, unix power tools
[02:55] <Dr_willis> and aparently it never covered 'touch;
[02:56] <earl1> it's a really thick book that I never entirely covered
[02:56] <rypervenche> earl1: http://linuxcommand.org/tlcl.php
[02:56] <rypervenche> earl1: Download the PDF on that page.
[02:58] <rypervenche> echoe__: I did a chmod on my home directory once, recursively. I didn't realize that I could just put it back to the way it was, I thought it was screwed for good. Reinstalled, lol.
[02:58] <earl1> when installing, what does "Location for the new partition: Beginning or End" mean?
[02:59] <echoe__> Rypervenche, ouch. X.x hehe. Well. But now! Now you know better
[02:59] <rypervenche> echoe__: And now I don't use Ubuntu ^^
[02:59] <TheUsD> is there a GUI way to mount a windows network drive and vise versa?
[02:59] <echoe__> What do you use then?
[02:59] <Dr_willis> visa versa? you mean Unmount it?
[02:59] <earl1> And there was an option for logical & something else
[02:59] <Dr_willis> Nautilus has a feature to access samba shares. there used to be tools like smb4k, and  some other samba browser-guis as well.
[03:00] <dez82> bity: with proprietary driver?
[03:00] <TheUsD> Dr_Willis: vise versa meaning windows machine connect to a network drive on ubuntu
[03:00] <rypervenche> echoe__: Gentoo.
[03:00] <Dr_willis> TheUsD,  you make a samba share.. and browse to it via windows... its a default windows feature
[03:00] <echoe__> Ahh, that works. I need to install that sometime. Am still a bit of a neophyte
[03:01] <TheUsD> Dr_willis: havent attempted to do so yet, was jsut seeing before I go through the trouble of it. (two day old ubuntu user here)
[03:01] <TheUsD> Dr_willis: thank you for the advice
[03:02] <Dr_willis> TheUsD,  easier to use ssh and winscp if you just need to transfer a few files
[03:02] <earl1> I'm rebooting her
[03:02] <harshadura_> lol
[03:03] <echoe__> Reboot, it fixes permissions issues! Every time!
[03:03] <lqid> Can someone help me out sitting my default Telnet handler from Chromium? No idea how to do it. :(
[03:03] <earl1> I'm attempting to switch my mother from windows to ubuntu
[03:03] <TheUsD> Dr_willis: No, I will be maping my windows FTP server to the drives for extra storage.   kinda like a nas
[03:03] <bodom> I have a problem with dhcp server: it says "Can't create new lease file: Permission denied" every time it tries to rotate the lease file
[03:03] <harshadura_> heh
[03:04] <earl1> Waiting up to 60 more seconds for network configuration….
[03:04] <earl1> r'oh
[03:04] <Dr_willis> TheUsD,  running a ftp server on windows? eww.   there are ways to mount a ftp server to a local directory via the 'fuse' tools or again.. Nautilus can browe them
[03:04] <earl1> something went wrong
[03:04] <bity> dez82, whatever the generic drives are
[03:05] <TheUsD> Dr_willis: the ubuntu server is just going to be a mail server and extra storage.   and not eww, Wing FTP is a great program, controls all users, files, quotas, time access, expiration and ect. allows SSH, SSL, HTTP HTTPS FTP FTPS and more.
[03:05] <TheUsD> very strong tool, very secure. Surprising for windows
[03:05] <etfb> I'm using Ubuntu 13.04, and none of the instructions I've found are up to date. Can someone tell me how to cuse Remote Desktop to connect from one computer to another within my home network?  The computer I want to talk to is my headless webserver.
[03:06] <Corey> etfb: If it's both headless, and a server, why not just use ssh?
[03:07] <earl1> Welp. My iptables didn't save. Even after saving iptables using "sudo -i"
[03:07] <Dr_willis> TheUsD,  so you are not using ftp then? but ssh/scp/sftp i hope.
[03:07] <earl1> woa is me
[03:07] <earl1> whoa*
[03:07] <Corey> etfb: iptables-save > iptables.rules
[03:07] <rypervenche> earl1: Woe is you.
[03:07] <Corey> Er, earl1 ^
[03:07] <earl1> Corey, i tries that
[03:08] <earl1> This...sucks...
[03:08] <Corey> earl1: Sudo with a redirect doesn't do what you think it'll do.
[03:08] <earl1> It worked before…I don't get it
[03:08] <TheUsD> Dr_willis: if the user wants to use FTP they can, but yes, all types are supported. Its however they are most comfirtable with.
[03:08] <Dr_willis> what iptables rules are you even needing to do
[03:08] <Corey> earl1: What was your exact command?
[03:08] <etfb> Corey: because I want to set up some stuff that can only be configured with a GUI.  The server has a full installation of Ubuntu, it just doesn
[03:08] <Dr_willis>  sudo command > foo    definatly is NOT correct.
[03:08] <etfb> 't have a monitor attached.
[03:09] <Corey> Dr_willis: It could be. :-)
[03:09] <Corey> Dr_willis: sudo iptables-save > ~/iptables.rules would work, for instance.
[03:09] <earl1> sudo iptables-save > /etc/iptables.rules/
[03:09] <Corey> earl1: Yes, that will fail.
[03:09]  * rypervenche headdesks.
[03:09] <Dr_willis> big fail.. as we said earlier
[03:09] <earl1> sudo iptables-save > /etc/iptables.rules
[03:09] <earl1> *
[03:09] <Corey> earl1: In addition to not redirecting to an actual file, you won't have write permissions in /etc/
[03:10] <Dr_willis> echo "foo" | sudo tee /root/somefile
[03:10] <Dr_willis> is the 'correct' way
[03:10] <Corey> earl1: Yeah, that won't work. sudo iptables-save | sudo tee /etc/iptables.rules will.
[03:10] <Dr_willis> yeppers..
[03:10] <echoe__> Oy.
[03:10] <Corey> Or cheat.
[03:10] <Dr_willis> http://ubuntu-tutorials.com/2008/05/09/a-root-shell-on-ubuntu-the-right-way/
[03:10] <Corey> sudo bash; iptables-save > /etc/iptables.rules
[03:10] <Corey> I tend to not play the sudo game when I need to mess with redircts.
[03:11] <rypervenche> Or do what we told him to do earlier. sudo -i, then run the command without any sudo.
[03:12] <earl1> rebooting
[03:13] <echoe_> I tend to not play the sudo game when ... ever. >.>
[03:13] <apb1963> I'm trying to use the "screen" utility to run a script.  The script is supposed to spawn some children to listen on a port.  The script works fine if I execute it from the command line.  But, when I execute it by using "screen", it exits immediately without comment.  Any ideas?
[03:15] <earl1> Waiting up to 60 more seconds for network configuration….
[03:15] <earl1> hmmm
[03:16] <TheUsD> Dr_willis: is there anything I need to do in ubuntu to give my windows machine access? I see it in the networking field of win but no drives and etc are pulled from it
[03:16] <Dr_willis> !samba
[03:16] <echoe_> apb how are you calling the screen utility?
[03:16] <etfb> !vnc
[03:16] <Dr_willis> install samba, set up some samba shares  TheUsD , theres no default firewall rules to block  samba, or ssh, or ftp
[03:17] <etfb> ^^ That's old and out of date. Also riddled with errors.
[03:17] <TheUsD> Dr_willis: samba was installed when installing server, but I do not know how to access samba and etc.. again I'm a two day old user on ubuntu
[03:17] <earl1> It didn't save my iptables
[03:17] <earl1> at all
[03:18] <TheUsD> I did gksudo samba, it asked for a password but after that it did nothing.
[03:18] <Dr_willis> see the samba wiki guide mentioned above. theres also the 'samba-doc' package that has several books (in html format) on using samba
[03:18] <Dr_willis> you DONT do 'gksudo samba' that dosent make sence
[03:18] <apb1963> echoe_ I've tried a variety of ways... but the way I started with is: /usr/bin/screen -d -m -S ASTfastlog ./FastAGI_log.pl
[03:18] <Dr_willis> samba is a service that runs at boot time. and shares whatever shares you have made.
[03:18] <Dr_willis> right click on a folder in a users home.. select share.. make a guest share.. is one way to make a share
[03:19] <TheUsD> ohh, haha, thought samba was a program ;-p
[03:19] <Dr_willis> samba is a service
[03:19] <TheUsD> thanks for the insight
[03:19] <echoe_> what does it do? anything that may inadventently calse screen to close?
[03:19] <Dr_willis> !info samba-doc
[03:19] <pryzrak> TheUsD: install WinMin on Ubuntu to use as a webGUI. It has samba admin page. It's useful for first time *nix users.
[03:19] <meLon> If I use scp with something like the following: scp remote1:blah.txt remote2:, it tries to connect to remote2 via remote1.  Is it possible to scp locally temporarily/transparently and then push to remote2?
[03:19] <Dr_willis> 'web gui front ends' are best used with extreme caution
[03:20] <apb1963> echoe_: I don't know what might cause the screen to close???
[03:20] <TheUsD> pryzrak: thanks
[03:20] <Corey> meLon: Uh... what? :-)
[03:20] <lotuspsychje> pryzrak: usefull tool! never heard of it
[03:20] <Corey> meLon: Oh, I see what you're saying.
[03:20] <Dr_willis> best to learn how samba works.. and what its configs do.
[03:20] <echoe_> exit, ctrl+a+d ... screens are oddly kinda fragile sometimes too. they must be treated like companion cubes
[03:20] <earl1> I used this before and it worked. https://www.youtube.com/watch?v=E7rpCha1lTY . I had to add "iptables -A INPUT -i lo -j ACCEPT" to it.
[03:20] <lotuspsychje> !info winmin > lotuspsychje
[03:21] <Corey> meLon: Copy it down to you, then a second scp to the remote.
[03:21] <apb1963> not sure what a companion cube is but...  there is in fact an "exit" in the script.
[03:21] <pryzrak> Dr Willis: I agree. It is best to learn. However Webmin is good to learn with.
[03:21] <meLon> Yeah, trying to avoid that.  I was hoping scp would have that built in or something Corey
[03:21] <earl1> 64 bit also
[03:22] <Dr_willis> pryzrak,  WEBMIN is definatly worth avoiding in UBUNTU
[03:22] <Dr_willis> !webmin
[03:22] <apb1963> but it spawns kids so.... not sure why that would kill the kids
[03:22] <Corey> meLon: Oh, it does.
[03:22] <lotuspsychje> right no wonder never heard of it lol
[03:22] <Corey> meLon: -3 is the option you want.
[03:22] <apb1963> I'll watch the vid
[03:22] <Dr_willis> lotuspsychje,  he spelt it wrong the first time. ;)
[03:22] <pryzrak> Dr Willis: I wouldn't use it either. I like no front ends. Less to worry about.
[03:22] <lotuspsychje> webmin is very vunreable
[03:22] <TheUsD> I did a raid1 earlier on two 2tb hdds and for some reason it partitioned only 800+gigs as the raid on both drives, any reason why?
[03:23] <Corey> meLon: Strange option name, but there's no fixing that I 'spose.
[03:23] <TheUsD> could it be the chunk size I set? I set 64 as chunk size
[03:23] <meLon> Thanks Corey.  Exactly what I was looking for
[03:23] <Corey> meLon: No worries. man scp is enlightening reading.
[03:23] <meLon> Yeah, as soon as you said -3 I looked at the man and there it was.  Normally I don't have such luck in man pages :\
[03:24] <rypervenche> earl1: This tutorial teaches how to log into the root user...that's why you were not having any problems running the commands before.
[03:24] <lotuspsychje> is there a tweak for windows to have min/maximize buttons always ontop (instead of unity panel way)?
[03:24] <Corey> meLon: Yeah, my current list of "what to read on my next plane ride" is dig, mtr, and rsync.
[03:24] <rypervenche> earl1: Just type "sudo -i" before running any of those commands and you won't have any problems.
[03:25] <echoe_> rsync is still so confusing.
[03:25] <BillJobs> Is anyone here really familiar with resolution changing? I need help.
[03:25] <echoe_> sometimes being thrown into the deep end ruins comprehension x.x
[03:25] <earl1> But, ryper. I did...
[03:25] <lotuspsychje> !xrandr | BillJobs
[03:25] <apb1963> ok i'm not sure the vid was meant for me>?  lol
[03:25] <earl1> I tried what u guys told me to do
[03:26] <rypervenche> earl1: You were not root apparently.
[03:26] <blackdog> g'day all - not entirely sure if this is the right place to ask, but here goes. I have a service running under upstart. I need to change some settings in /etc/security/limits.conf for a particular user. They work fine if i log in with a login shell, but it seems that upstart just runs setuid. Is there an approved way of getting PAM to run those for services?
[03:26] <earl1> after doing sudo -i, i reconfig'd
[03:26] <earl1> saved too
[03:26] <meLon> Can anybody check out the PS1 part of my .bashrc and help me figure out why root bash has problems when multiline or when I press up to scroll through bash history?  The shell doesn't 'clear' as it is supposed to and there are artifacts and such http://pastie.org/private/aknstbtyeocw7dey1fh1pa
[03:27] <FrozenFire> So... just FYI, if you're using deja-dup for your regular backup system, I'd seriously recommend checking your backups.
[03:27] <rypervenche> earl1: Possibly a typo somewhere. Using the tab key to auto-complete your filenames is always a good thing to do.
[03:27] <Corey> meLon: That's part of the reason I switched to zsh.
[03:27] <FrozenFire> I just went to do a restore on a fresh install of my system, and my backups are screwed
[03:27] <Corey> FrozenFire: Define screwed.
[03:27] <FrozenFire> They tend to either hang on a gpg error, or they take an infinite amount of time to actually restore. I've not yet been able to recover my data.
[03:27] <BillJobs> Is it possible to add a new resolution? Windows 8 somehow deleted the native resolution of my monitor and now, since I did a clean install of Ubuntu hoping it would fix the issue, it's still present.
[03:27] <meLon> I've only known MAC users to switch to zsh.  As a debian/Ubuntu/linux user, you're finding it to work well, Corey ?
[03:28] <FrozenFire> I'm going to try manually accessing the data using duplicity
[03:28] <FrozenFire> But I'm not confident
[03:28] <Corey> meLon: My laptop is a Mac. My servers are a pile of different Linux distros. It works well for me.
[03:28] <Corey> meLon: I sync it all with vcsh + git.
[03:28] <FrozenFire> Fortunately I made a separate pre-wipe backup of my dotfiles
[03:28] <donnelly> Hi guys, I need to set ubuntu as a wireless server with access for a number of networked computers.  Anyone know the easiest way to do this?  newbe to the linux network
[03:28] <echoe_> can never have enough backups.
[03:28] <Corey> FrozenFire: Yeah, this is why testing restores is key.
[03:28] <FrozenFire> But I'm still losing a whole ton of important data if I can't get this recovered
[03:29] <earl1> ouch
[03:29] <Corey> Not that that helps you at this point.
[03:29] <Corey> donnelly: "Wireless server?"
[03:29] <donnelly> yep
[03:29] <lotuspsychje> FrozenFire: you can use photorec, inside testdisk, the best recovery software ever
[03:29] <donnelly> any ideas
[03:29] <FrozenFire> lotuspsychje, Not an option
[03:29] <mtreece> meLon: I think I know the problem you're talking about, I suffer the same whenver I've got a color shell prompt.
[03:29] <FrozenFire> Given that I encrypt all filesystems
[03:29] <rypervenche> FrozenFire: What did you use to encrypt it?
[03:29] <FrozenFire> I'll just have to try to pull the data out of my duplicity backups
[03:30] <pryzrak> donnelly: are you refering to Access Point?
[03:30] <BillJobs> I've messed around with xrandr but when it comes to the xorg.conf based configuration part, I'm totally lost. I'm starting to learn so I have no clue what I'm doing in there.
[03:30] <FrozenFire> rypervenche, Doesn't *really* matter. The filesystem is already overwritten
[03:30] <rypervenche> FrozenFire: It DOES matter if you want your data back.
[03:30] <lotuspsychje> BillJobs: ask in channel howto add a res in xrandr
[03:31] <FrozenFire> Nope. There's zero chance of recovery at this point, for the on-disk info. Recovering from the duplicity backups is still a possibility, since it's most likely just a software failure in deja-dup
[03:31] <donnelly> I have files - mostly docs and media that I need to share.
[03:31] <donnelly> wireless - yeas
[03:31] <FrozenFire> I do actually get a fair number of recovered files out
[03:31] <FrozenFire> It just hangs each time I try to restore
[03:31] <lotuspsychje> FrozenFire: any deja-dup errors?
[03:31] <rypervenche> FrozenFire: Well I feel you won't get much help from people here if you're not willing to help us help you.
[03:32] <BillJobs> How to add a res in xrandr?
[03:32] <deezed> Hey guys! I`m having a problem with my kxstudio here, when I try to upgrade or install nvidia-current I always get this message: errors were encountered while processing: nvidia-current
[03:32] <deezed> do u know what can I do
[03:32] <deezed> ?
[03:32] <FrozenFire> rypervenche, To be honest, I'm not really looking for help. I'm just giving an FYI that people should check their deja-dup backups immediately
[03:32] <FrozenFire> Since mine just failed fairly catastrophically.
[03:32] <FrozenFire> I know what my options are in this case. ;)
[03:33] <FrozenFire> Also, when referring to deja-dup, it should be clarified that I'm talking about the "Backup" utility in Ubuntu
[03:33] <rypervenche> FrozenFire: Apparently not. It is still possible to restore data from an encrypted partition, but it depends on the encryption and partition type that was used.
[03:33] <pryzrak> donnelly: do you have server or desktop?
[03:33] <FrozenFire> rypervenche, It's not possible to recover overwritten data, though. ;)
[03:33] <FrozenFire> It's fairly certain that the keys are overwritten at this point.
[03:33] <lotuspsychje> FrozenFire: photorec can recover data from for away times...
[03:33] <rypervenche> FrozenFire: Nope, but I would think you wouldn't lose all of your data.
[03:34] <BillJobs> I think I'm just going to re-install windows 8 and try to fix the resolution issue there. This feels a bit way too advanced for a newb to figure out.
[03:34] <FrozenFire> I can say with certainty that it's not possible to recover from my old encrypted filesystem
[03:34] <donnelly> I have a desktop that I have tried to set as a server - wireless.  Internet access can be had through the wirless modem, file sharing is what I want to do.
[03:34] <FrozenFire> It's already been overwritten quite completely.
[03:34] <apb1963> echoe_: I commented out the exit in the script... made no difference.
[03:34] <lotuspsychje> BillJobs: keep asking in channel once in a while..its worth a wait
[03:35] <rypervenche> FrozenFire: Your loss then. We were willing to help.
[03:35] <lotuspsychje> BillJobs: did you clean install ubuntu?
[03:35] <FrozenFire> No need to be passive aggressive.
[03:35] <echoe_> mmmf.
[03:35] <FrozenFire> I didn't ask for help.
[03:35] <donnelly> I know how to do this in windows (not 7 or 8) but want to do this in linux
[03:35] <FrozenFire> And I'm qualified to figure the recovery out myself. :P
[03:35] <donnelly> pryzrak - thanks
[03:35] <surfdaemon> !offtopic > FrozenFire
[03:36] <BillJobs> I believe so
[03:36] <FrozenFire> surfdaemon, It's not offtopic :)
[03:36] <FrozenFire> Anyways, whatever.
[03:36] <surfdaemon> FrozenFire: this is a support channel.
[03:36] <FrozenFire> Yup
[03:36] <BillJobs> definitely didn't dual boot
[03:36] <FrozenFire> "Deja-dup is broken" is me supporting the greater community by making that clear.
[03:36] <pryzrak> you can share folders by using samba or smb from desktop. However make sure you have your firewall on ur ubuntu box configured correctly.
[03:36] <deezed> Anybody could help me with nvidia problems
[03:36] <apb1963> echoe_: Is there anyway to make screen more verbose as to what it's doing perhaps?
[03:36] <deezed> ?
[03:37] <echoe_> isn't there a -v
[03:37] <echoe_> ?
[03:37] <BillJobs> -v
[03:37] <lotuspsychje> BillJobs: http://www.ubuntugeek.com/how-change-display-resolution-settings-using-xrandr.html
[03:37] <echoe_> you can always manually open it with screen -S name, then run it in screen manually and see if it works fine
[03:38] <echoe_> ooh
[03:38] <echoe_> apb1963, http://askubuntu.com/questions/62562/run-a-program-with-gnu-screen-and-immediately-detach-after
[03:38] <TheUsD> Dr_willis: you said I could just right-click and share folder, what about an entire HDD?
[03:38] <donnelly> deezed, Nvidia is always a problem.  Keep it simple
[03:38] <echoe_> I think you're looking for screen -S [name] -d -m ./[name]
[03:39] <apb1963> -v gives version.  I open using "screen", and run it.. works fine. Doesn't exit.
[03:39] <puff> Dr_willis: Hm, what do you think about the advice here, comment #11:  http://www.linuxquestions.org/questions/linux-hardware-18/size-in-superblock-is-different-from-the-physical-size-of-the-partition-298175/
[03:39] <meLon> No, what you really want is -dURS    `screen -dURS SCREENNAME`
[03:39] <apb1963> [20:18] <apb1963> echoe_ I've tried a variety of ways... but the way I started with is: /usr/bin/screen -d -m -S ASTfastlog ./FastAGI_log.pl
[03:39] <donnelly> any ideas -
[03:40] <meLon> That will resume, detach resume, or create your screen :D
[03:40] <deezed> donnelly: I know, I just need to set mine. `Cause I always get the message errors were encountered while processing nvidia-current
[03:40] <puff> Dr_willis: Basically suggesting:  resize2fs /dev/whatever thesizethatsuperblockthinksitis
[03:40] <Dr_willis> puff,  that sounds like what gparted does  as its a frontend to the backend cli tools.
[03:41] <puff> Dr_willis: Not sure how to ask gparted to do that... I tried right-click Check, nothing happened.
[03:41] <Dr_willis> puff,  when you resize a partion thats what it does.. you DO have the partions Unmounted?
[03:41] <Dr_willis> resize it and shrink it down a little bit
[03:41] <puff> I guess Partition/Resize?
[03:42] <puff> Yeah, the partition is unmounted.
[03:42] <puff> Okay, so resize it even smaller?
[03:42] <Dr_willis> or bigger.. see if it gets the correct #
[03:42] <apb1963> meLon: that's confusing... are you saying to execute as-is and then execute my script inside the screen that's created?
[03:42] <donnelly> It's been a while, but I tried to "upgrade" and all I managed to do was make the graphics worse.  I run an older p4 with nvidia and use the default ubuntu settings.  Upgrading is not use - if you (?) have an older card.
[03:43] <echoe_> i thought it maybe was the order of the flags for some reason. /watches.
[03:43] <deezed> donnelly: uhm, maybe can be that. In this case, do u know how can I downgrade?
[03:44] <meLon> `screen -dURS ttytter -c /home/meLon/.screenrc.ttytter` apb1963   .screenrc.ttytter: http://pastie.org/private/qsutncjzivvpweqkuyg9tw
[03:45] <meLon> apb1963: TBH I have no idea what you're trying to accomplish and only saw half of your messages.  This will create or restore your screen, whichever it needs to do.
[03:45] <puff> Dr_willis: Hm, it said an error occurred, see the details. The details said "calibrate /dev/sda7" and "check file system on /dev/sda7 for errors and (if possible) fix them>'
[03:46] <Dr_willis> puff,  'fsck' the filesystem . may be all it needs
[03:46] <puff> Which is pretty much the same thing as I got when I did right-click check, apply operations.
[03:46] <Dr_willis> gparted might be able do do that.. or 'sudo fsck /dev/sda7'
[03:46] <donnelly> deezed:  I did it through synaptic, but you may have to go to the Nvidia website or a secondary source.  Like I said it's been a while -- there are a lot of sources for help, but you have to know what model card your working with.  I assume you know this.
[03:46] <puff> Okay, I'll try that.
[03:46] <apb1963> meLon: I'm trying to use the "screen" utility to run a script.  The script is supposed to spawn some children to listen on a port.  The script works fine if I execute it from the command line.  But, when I execute it by using "screen", it exits immediately without comment.
[03:47] <puff> Okay, the first thing that fsck does is give me the superblock/physical size mis-match warning and prompt me to abort.
[03:47] <puff> I assume "no"?
[03:47] <apb1963> meLon:  I've tried a variety of ways... but the way I started with is: /usr/bin/screen -d -m -S ASTfastlog ./FastAGI_log.pl
[03:47] <Dr_willis> you got imporntant stuff backed up i hope?
[03:47] <meLon> apb1963: So I'd use the command I've suggested and customize the screenrc file to launch your program
[03:47] <puff> Dr_willis: Yeah.
[03:48] <Dr_willis> go for it then. ;)
[03:48] <puff> Well okay then...
[03:48] <Dr_willis> or just delete the partions, remake, restore from bvackups..
[03:48] <echoe_> I think it might display the output in the screen session.
[03:48] <puff> Hm, it ran, did some stuff, no obvious results.
[03:48] <apb1963> meLon: TBH I don't understand what you've got going on there in your example.
[03:49] <meLon> You'll see at the bottom of the pastie to which I linked the part you'll want to modify (screen -t...).  Anything above that are just personal options I prefer, so you can delete them.  Let me know if you get it running using a screenrc file
[03:49] <meLon> So, at the bottom you'll want to do:  screen -t "Title of screen" 0 /path/to/ASTfastlog ./FastAGI_log.pl
[03:49] <apb1963> echoe_: I'm not sure to what your comment refers?
[03:50] <puff> http://paste.ubuntu.com/5705641/
[03:50] <deezed> donnelly: no, maybe I dont know which one is better for me. I`m using an Ubuntu 12.04 and a Nvidia 304.88. But I dont know which version I should have take. Do u know how can I check it
[03:50] <Debomb72> hello i'm trying to install Ubuntu onto the /dev/sda5 nstf, and when i click install now, it shows a window that says: "No root file system is defined. Please correct this from the partitioning menu"
[03:50] <deezed> ?
[03:50] <echoe_> apb1963, I made a dumb testscript and am running it in my virtualbox instance and i think the screen command runs it in the screen instance which it then closes.
[03:51] <deezed> Debomb72: When u try to install it, just choose the mount point.
[03:51] <loganlee_> Debomb72: u mean ntfs?
[03:51] <donnelly> Deezed:  checking something ....
[03:51] <konectd> tet
[03:51] <konectd> *test
[03:51] <deezed> donnelly:  ok
[03:51] <rmobenchain> hello everyone.  have a question concerning fsck
[03:51] <meLon> rmobenchain: Just ask and we'll see what we can do
[03:51] <echoe_> eg if I run my testscript that does echo testscript, it shows it to me, and if I run it with the screen command, it shows nothing, but if I touch testfile it touches the testfile.
[03:52] <Debomb72> loganlee_: yes i meant to say ntfs, sorry about the typo
[03:52] <apb1963> echoe_ Yes perhaps, but the -d command detaches it... and so in the case of a port listener, it continues to run and you should be able to reattach with -r
[03:52] <echoe_> have you looked for the open screens?
[03:52] <apb1963> yes
[03:52] <apb1963> they're not there
[03:52] <echoe_> or they just don't ... weeeeird
[03:52] <apb1963> yeah
[03:52] <apb1963> welcome to my world :)
[03:52] <rmobenchain> meleon:  ran the following command in terminal, "sudo fsck -y /dev/sdf1" and at the end of the message got this back, " Not automatically fixing this. /dev/sdf1: 261 files, 208358/471902 clusters"  What does this mean?
[03:52] <echoe_> yeah it's something in the script exiting it somehow, my test stuff is still open
[03:53] <deezed> Debomb72: u got it?
[03:53] <meLon> -dURS are the flags you want if you want it to:  Detach the screen if it's attached, Resume the screen if it exists, or create the screen if it does not exist
[03:54] <donnelly> Deezed:  you probably have this - but - have you looked at this?  http://www.nvidia.com/object/linux-display-ia32-304.88-driver.html
[03:54] <konectd> Does anyone know how htaccess and htpasswd files are encrypted?
[03:55] <loganlee_> they are not encrypted i think
[03:55] <puff> loganlee_: Yeah, htpasswd files contain an encrypted password.
[03:55] <loganlee_> ook
[03:56] <apb1963> meLon: Those flags do indeed create a new screen... and that's all it does.  No output from the script.  The second time I run it, it terminates immediately.  screen -list shows nothing.
[03:56] <deezed> donnelly: yes, probably! But what do u mean looked at this?
[03:56] <meLon> Can you show me the entire line you're entering, apb1963 ?
[03:56] <donnelly> The link - http://www.nvidia.com/object/linux-display-ia32-304.88-driver.html
[03:56] <konectd> loganlee_: I setup auth sec on phpmyadmin (.htpasswd) and when I open it it's encrypted. Im just curious how this is done. I'm on my local machine and would like to play around with it.
[03:56] <loganlee_> konectd: oic i dunno ;)
[03:56] <apb1963> meLon: but wait.... I have children on my ports
[03:57] <puff> loganlee_: mcrypt will encrypt a password properly for .htpasswd.
[03:57] <donnelly> deeezed:  this gives you a run file for the driver
[03:57] <loganlee_> oic
[03:57] <apb1963> meLon: /usr/bin/screen -dURS ASTfastlog ./FastAGI_log.pl --debug
[03:57] <deezed> donnelly: yes but the problem is, I can not run my ubuntu distro here
[03:57] <betrayd> deezed see if it fits your card, i think if its legacy 304 is a good bet imho
[03:57] <deezed> donnelly:
[03:57] <konectd> loganlee_: puff: I've been looking through apache doc's but not much on sec..
[03:57] <deezed> donnelly: Im doing a chroot from a live cd
[03:58] <meLon> Apache uses MD5 or SHA1 for passwords
[03:58] <konectd> meLon: I'll look into that, thanks!
[03:58] <apb1963> -U   Run  screen in UTF-8 mode.
[03:59] <puff> konectd: http://www.mindbend.org/techblog/htaccess/Guide-to-understanding-and-using-htaccess-effectively
[03:59] <donnelly> deezed: A, a fresh installation - Ubuntu 12.04 -
[03:59] <meLon> screen -dURS ASTfastlog bash -c 'perl /full/path/to/FastAGI_log.pl'
[03:59] <deezed> donnelly: haha Yes I`m really considering this
[03:59] <konectd> puff: Awesome! Thanks for the link!!
[03:59] <puff> Anybody know how to fix a bad partition resizing where the physical size ends up being not the same as the superblock?
[04:00] <donnelly> Deezed:  don't suppose you looked at a Ubuntu variant - OZ?
[04:00] <konectd> puff:
[04:00] <konectd> Ext 4?
[04:00] <deezed> donnelly: actually im using a variant already, for recording, called kxstudio
[04:00] <apb1963> meLon: did you notice when I mentioned that I now have children listening on my ports?
[04:01] <rmobenchain> I think I may have missed a post concerning my issue
[04:01] <puff> konectd: Yes.
[04:01] <meLon> I'm waiting around as you've said you've got something going on, yes apb1963
[04:02] <apb1963> so the -dR combo is what seemed to work... but I'm trying to make sense of it.... I have other scripts that work with -dm
[04:02] <puff> konectd: paste.ubuntu.com/5705366/
[04:02] <apb1963> and to be honest, this used to work until I started messing with the script
[04:02] <apb1963> I think there must be something in the script like echoe_ was saying
[04:02] <donnelly> Deezed:  Gotta look at that one - I use OZ b/c it has all the "bells and whistles" and comes ready to burn, share and do what I want for data, audio and video.  The version on this computer is 10.04 and the version on my usual laptop is 12.04.
[04:03] <apb1963> but it just doesn't make sense
[04:04] <apb1963> however... what echoe_ said earlier gives me an idea....  I'll open a screen, and then debug the script... and see at exactly what point it exits
[04:04] <apb1963> back in a few
[04:04] <pala> hi, i'm trying to get an ipw2200 driver to work with an wep network... i keep getting "Firmware error detected. Restarting"
[04:04] <deezed> donnelly: Uhmmm, it sounds interesting! I`m gonna check it out!
[04:04] <deezed> donnelly: thanks!
[04:04] <apb1963> but just to make sure it gets said... thank you both!
[04:04] <rmobenchain> ran the following command in terminal, "sudo fsck -y /dev/sdf1" and at the end of the message got this back, " Not automatically fixing this. /dev/sdf1: 261 files, 208358/471902 clusters"  What does this mean?
[04:05] <donnelly> Deezed:  But back to your install, your going to have to take the plunge and try one of the options.  If it does not work - try a new install and choose a different option  If you have info on your computer, and dont want to loose it, then don;t format the drive and simply do a system overright.
[04:05] <konectd> puff: http://linuxexpresso.wordpress.com/2010/03/31/repair-a-broken-ext4-superblock-in-ubuntu/
[04:05] <konectd> puff: parted  magic.. ?
[04:06] <deezed> donnelly: uhm, so if I dont format it, couldnt I have the same errors?
[04:06] <meLon> Parted Magic is a live distribution of linux you can install with the *latest* version of unetbootin onto a thumb drive.  It is great for fixing HDD issues konectd
[04:06] <bradley> hello, i was wondering if it was possible to cluster multiple AMD 8350's and if so how would one do this?
[04:06] <meLon> You *must* get the latest version of unetbootin in order for it to work with parted magic
[04:07] <meLon> bradley: Like a Beowulf Cluster?
[04:07] <bradley> cpu cluster
[04:07] <meLon> Yeah, you probably want to look into Beowulf Clustering
[04:07] <bradley> ok
[04:08] <meLon> At least that will give you something to start your journey.  I hear newer kernels are supposed to start supporting CPU load balancing over LAN, but I haven't seen anything come out just yet
[04:08] <puff> konectd: Thanks.
[04:08] <bradley> this looks insane, im gonna try and build a 32 core overkill machine(s)
[04:09] <puff> konectd: Reading that now.
[04:09] <apb1963> ok that was a pointless exercise...  the parent exits.... just like it's supposed to.
[04:09] <donnelly> Deezed:  If your drive is error free, no.  As for the system overright, no.  I have done this a number of times.  Just be careful to install, but not format.  You will have to chose the drive format, so choose the for mat you had before.
[04:09] <meLon> bradley: You may be intersted in this: http://hackaday.com/2013/05/21/33-node-beowulf-cluster-built-with-raspberry-pi/
[04:09] <donnelly> Deezed:  http://www.nvidia.com/object/linux-display-ia32-304.88-driver.html
[04:09] <Wiky> a big problem, libreoffice4 crashes when i click the menubar everytime
[04:10] <bradley> now the connecting cable, crossover cable or ethernet if i wanted to directly connect two computers
[04:10] <deezed> donnelly: ok!  I`ll try it
[04:10] <bradley> ?
[04:10] <donnelly> deezed:   https://www.ultimateeditionoz.com/download
[04:11] <|Anthony|> i'm having issues getting putty to connect to openssh. I've created the rsa key pair server side, given the private key to the putty client and converted it to openssh format, but the connection still fails
[04:11] <|Anthony|> any thoughts
[04:11] <donnelly> deezed:  If your doing it now, write back what you see if you have questions
[04:11] <meLon> What are you asking, bradley?  If you connect two machines with ethernet without a switch, you need crossover.  If you use a switch, you do not need crossover.  Some new NICs will auto-crossover for you
[04:11] <bradley> ok
[04:11] <secret_ninja> im using xubuntu, 13.04. installed fine. installed enlightenment and lost wireless networking
[04:12] <deezed> donnelly: ok! but I think I`ll not do it now. It will take some time, and I need to sleep.. lol
[04:12] <meLon> secret_ninja: I've always prefered wicd to manage my wireless
[04:12] <secret_ninja> any ideas???
[04:12] <secret_ninja> when i do ifconfig wlan0 it doesn't even see wlan0.
[04:12] <bradley> wait i thought there was a physical cross over cable
[04:12] <donnelly> deezed:  yeah, I should hit the sak too - late here in FL
[04:12] <secret_ninja> donnelly, where is fl?
[04:13] <donnelly> Deezed:  good luck
[04:13] <secret_ninja> where IN fl?
[04:13] <deezed> donnelly: hehe Thanks a lot man!
[04:13] <puff> konectd: Hm, okay, that's informative, but my problem is because I resized the partition, so I can't simply restore from a backup superblock.
[04:13] <rmobenchain> grr
[04:13] <donnelly> FL - Bradenton, Florida
[04:13] <meLon> secret_ninja: Not all wireless nic's will show up as wlan0.  Do you see your nic when you do `sudo ifconfig -a`
[04:13] <donnelly> Bye
[04:14] <konectd> puff: Hmm, how about recovering data on the partition that wrote over, then just re-install? Is that an option?
[04:14] <secret_ninja> melon: no.
[04:14] <meLon> bradley: Yes, you can build a crossover cable.  It's just two pins different than a normal cable if I'm not mistaken
[04:14] <meLon> secret_ninja: Do you know what kind of wireless card you have?  Is it atheros?
[04:14] <secret_ninja> yes. atheros
[04:14] <puff> konectd: Not really feasible, it's a large partition and I filled up my backup drive, backing up the other partitions.
[04:15] <meLon> secret_ninja: You don't see an ath0?
[04:15] <puff> meLon: Two pin switched, IIRC.
[04:15] <konectd> I sent out a tweet - on repairing ext4 superblocks - it's already got some retweets and favs. If I hear back anything I will let you know.
[04:15] <secret_ninja> melon: it shows as wlan0, but no, i dont see ath0 either..
[04:15] <konectd> puff: Read above post..
[04:16] <rmobenchain> are there any other ubuntu help rooms?
[04:16] <bradley> meLon how?
[04:16] <puff> konectd: You mean this one? http://linuxexpresso.wordpress.com/2010/03/31/repair-a-broken-ext4-superblock-in-ubuntu/
[04:16] <meLon> secret_ninja: `sudo lshw -class network`  Do you see it there?
[04:16] <secret_ninja> melon: *used* to show as wlan0. shows as wlan0 in this installation.
[04:16] <apb1963> rmobenchain: run it without the -y
[04:16] <meLon> bradley: You have crimpers? http://www.archonmagnus.com/mods/crossOverCable/crossOverCableDiagram2.jpg
[04:16] <apb1963> then it will let you decide if you want to repair it or not
[04:17] <secret_ninja> melon: im in a different boot partition right now.. no network when i boot to that one..
[04:17] <rmobenchain> ok.  thank you apb1963
[04:17] <apb1963> rmobenchain: be warned... you may lose files
[04:17] <apb1963> if you say yes to repairing it
[04:17] <bradley> :D thanks
[04:17] <konectd> no the tweet one
[04:17] <konectd> urgh!!!
[04:17] <konectd> puff: No, the tweet one..
[04:17] <meLon> secret_ninja: I'm not really sure what your problem is.  All I can suggest is using something like wicd to manage wireless.  It's solved so many problems for me.  `sudo apt-get install wicd wicd-gtk wicd-curses`
[04:18] <puff> konectd: Ah, how would I find that tweet?
[04:18] <rmobenchain> apb1963: at this point in time, I just want to be able to install ubuntu.  am using the LIVE CD and keep getting "input/output error read on /dev/sdaf" messages during install
[04:18] <kenji__> hi
[04:19] <kenji__> how can i install i2p ?
[04:20] <apb1963> rmobenchain: Not sure.  Possibly a hardware problem?  Sorry, it's been too long since i messed with that.
[04:20] <apb1963> you could try googling it
[04:20] <rmobenchain> apb1963:  I'm given a couple of options now.   1) Copy original to backup 2) Copy backup to original 3) No action.  Which do I want to do?
[04:21] <apb1963> sorry... no idea
[04:22] <rmobenchain> apb1963: could I somehow create a new parttion which doesn't have bad sectors, and install ubuntu there?
[04:22] <apb1963> anything is possyboo :)
[04:22] <rmobenchain> I'm a newb here and grasping at straws
[04:23] <apb1963> try it... the worst that happens is you have to reinstall it again
[04:23] <konectd> Anyone on twitter?
[04:24] <apb1963> i'm sure that's how most of us learned... trying options and seeing what happens
[04:24] <rmobenchain> apb1963: will try it.  I do think the hard drive failure is possible too.  Am also trying to figure out whether I have an IDE or a SATA drive.  Hav a few friends who say they have both types laying around at home
[04:25] <apb1963> SATA connector is smaller
[04:26] <apb1963> but /dev/sdaf .... that doesn't sound like ide... but then I don't know ubuntu that well... google it!
[04:26] <rmobenchain> LOL.  Ive looked at so many threads on google, I've gone batty
[04:26] <apb1963> welcome to my world
[04:27] <ceekay> save power in ubuntu ?
[04:27] <apb1963> my head hurts... i'm out for a while until the pain subsides.... good luck
[04:28]  * AndroidMan Hey Everyone, anyone up to talk about anything?
[04:28] <ceekay> save power in ubuntu ?
[04:30] <ceekay> anybody home ?
[04:30] <deezed> ceekay: try this https://help.ubuntu.com/community/PowerManagement/ReducedPower
[04:31] <deezed> ceekay: there are many things in ubuntu docs
[04:31] <deezed> ceekay: otherwise, if u have a more specifically problem its easier to help u
[04:32] <ceekay> @deezed just installed ubuntu , i have basic dev works only ..
[04:32] <ceekay> @deezed looking to extend the battery life
[04:32] <puff> konectd: This looks hopeful:  http://forums.fedoraforum.org/showthread.php?t=261295
[04:33] <meLon> ceekay: Look into Xubuntu and Lubuntu
[04:33] <deezed> ceekay: ok, but I believe u have the energy saving, right?
[04:34] <ceekay> @deezed yea i hope there might be someways
[04:38] <konectd> puff: Are you going to give that a shot? Can't hurt..
[04:41] <ceekay> android developers here ?
[04:41] <Gnea> ceekay: tried #android ?
[04:41] <ceekay> @Gnea thank you
[04:45] <puff> konectd: it's actually for ext3.
[04:46] <puff> konectd: I have a new external drive coming in on wednesday and the messed up partition is something I can get along without for a couple of days.  I think I'll wait, dd backup the partition, and then experiment.
[04:49] <konectd> puff: Probably best.. especially if you have a new drive on the way.
[04:49] <konectd> puff: When you got the original log displayed did you have little blocks next to your "234G"?
[04:51] <konectd> puff: Where mine says "614G" I had small blocks in gedit that read out 00 over 1B, next to those numbers. What are the blocks, machine lang?
[04:51] <konectd> puff: Here is my log http://paste.ubuntu.com/5705756/
[04:51] <siavashserver> Binary document
[05:02] <duderguy> hello
[05:02] <duderguy> got a quick question...new ubuntu user here
[05:03] <jj_> aso
[05:03] <duderguy> admin account has limited operations compared to guest account
[05:04] <duderguy> can't even resize windows, no menu bar..
[05:04] <duderguy> ideas?
[05:04] <nevyn> admin account?
[05:05] <konectd> duderguy: Is this a new instal, if so what kind of machine, dual boot? What ver of WIn?
[05:05] <jj_> bootboot
[05:05] <duderguy> new install, win 8 dual boot..hp 2000 machine...boot with uefi selection of hard disk boot sector
[05:06] <konectd> duderguy: The UEFI is the problem.
[05:07] <konectd> duderguy: Go into BIOS and change the UEFI to compatibility mode then re-install.
[05:07] <SuperLag> ugh
[05:07] <duderguy> -_-
[05:07] <SuperLag> that gives me the creeps
[05:08] <SuperLag> konectd: I'm working on a Dell Latitude D630. Too old for EFI.
[05:08] <konectd> duderguy: If not compatibility then you will have a Legacy option, Legacy is what you want to look for.
[05:08] <SuperLag> konectd: on Wednesday, I get a ThinkPad W530. I'm sure that thing will have EFI. I can't just pull the drive from this laptop and have it work in there, can I?
[05:09] <SuperLag> I dread the thought of having to reinstall and reconfigure everything on here... I have this thing just so.
[05:09] <duderguy> when i first tried installing ubuntu it was via unetbootin flash drive
[05:09] <duderguy> it got as far as installing the OS option on my OS loader
[05:10] <duderguy> (cant remember the name of the OS app)
[05:10] <duderguy> then it wouldnt load
[05:10] <duderguy> so i reinstalled with a livedvd
[05:10] <konectd> duderguy: You will run into conflicts with the Win boot loader if you don't correct this. Also, you will run into problems with the recovery drive because of the dual boot.
[05:11] <duderguy> not sure what i did wrong with the opensuse install...probably assigning boot partitions correctly
[05:11] <konectd> SuperLag: YOu can try pulling the drive.. I would image it then - turn on legacy - then install the image
[05:11] <konectd> SuperLag:
[05:12] <konectd> Are you looking to dual-boot with Win?
[05:12] <SuperLag> me?
[05:12] <SuperLag> no
[05:12] <SuperLag> just Linux
[05:12] <SuperLag> anything else will be run from a VMware Workstation VM
[05:13] <konectd> SuperLag: Then I would image it.
[05:13] <SuperLag> What drive am I imaging? the current Linux drive?
[05:13] <konectd> SuperLag: I think if you swapped drives because of the all the Lenovo stuff.. mainly drivers you may run into more problems then it would be worth,IMO.
[05:13] <SuperLag> like what?
[05:14] <konectd> SuperLag: Yea, the linux machine that you don't want to re-install
[05:14] <konectd> SUperla
[05:14] <SuperLag> the kernel is very modular, right?
[05:14] <SuperLag> so... what issues would I have?
[05:14] <konectd> SuperLag: Then you fresh install with that image.
[05:14] <SuperLag> the only issue I foresee, is maybe the video
[05:14] <konectd> SuperLag: Driver issues with the lenovo hardware.
[05:14] <aden_> Hi guys, just wondering how I can configure my ubuntu vm to automatically append a hostname onto a lookup, for example I want to run "ping server1" and get results for "server1.example.com"
[05:14] <konectd> Probably, wifi, eth0, video..
[05:15] <SuperLag> konectd: Why would there be issues with a *very* modular kernel?
[05:15] <konectd> aden_: That should have been configured automatically when you built the VM.
[05:15] <SuperLag> konectd: the kernel will just load the modules it needs for the devices it finds
[05:15] <konectd> SuperLag: What os are you running?
[05:15] <SuperLag> Xubuntu 13.04
[05:16] <konectd> SuperLag: Then your fine.
[05:16] <aden_> konectd, is there a way to configure this after the fact?
[05:16] <konectd> SuperLag: I thought you had said you were on Fedora.. someone else..
[05:16] <SuperLag> Nope. :)
[05:16] <konectd> aden_: Yea, via Terminal
[05:16] <SuperLag> konectd: I've had enough of RPMs to last me a lifetime. :D
[05:17] <konectd> Google search your OS ver and how to change hostname file via VIM
[05:17] <kaushal> Hi
[05:17] <konectd> aden_: or nano, or gedit, whatev's..
[05:17] <Dr_willis> !hostname
[05:17] <kaushal> is there a way to restart ssh session on gnome-terminal whenever the network gets disconnected?
[05:17] <konectd> aden_: ubottu nailed it.
[05:18] <Dr_willis> kaushal,  learn to use screen when you ssh into a system
[05:18] <kaushal> Dr_willis: I am on my local system
[05:18] <Dr_willis> kaushal,  and if ssh disconnects.. you ssh back in.. and resume the screen session
[05:19] <SuperLag> screen++
[05:19] <kaushal> Dr_willis: yeah i know it
[05:19] <SuperLag> or tmux even
[05:19] <SuperLag> but they're both indispensible!!
[05:19] <kaushal> Dr_willis: but i again have to reconnect using ssh user@IP
[05:19] <aden_> okay, I'm not looking to change the hostname of my ubuntu install though, I just want to set up a domain that will automatically be added to an incomplete hostname.. if that makes sense ^^'
[05:19] <kaushal> any auto ssh method once the network is up
[05:19] <aden_> is that still done via the hostname command?
[05:21] <histo> kaushal: you could use screen
[05:21] <Dr_willis> ;)
[05:21] <Dr_willis> putty ? ;)
[05:21] <histo> kaushal: and there is a persistent connection option
[05:21] <duderguy> my win8 boots normally through my bootloader
[05:22] <duderguy> i have to go to advanced uefi options and select the partition where ubuntu is and it loads
[05:23] <duderguy> but you're saying im running into issues because of this?
[05:23] <konectd> duderguy: yea
[05:24] <konectd> duderguy: You want legacy mode if dual booting with Win8
[05:24] <histo> konectd: he can use efi
[05:24] <histo> duderguy: What version of ubuntu did you install?
[05:25] <duderguy> 13.something
[05:25] <histo> duderguy: 64bit or 32bit?
[05:25] <duderguy> 64
[05:25] <histo> !uefi | duderguy
[05:26] <kaushal> histo: apologies was away
[05:26] <kaushal> screen with persistent connection?
[05:26] <kaushal> histo: let me understand
[05:26] <aden_> konectd: sorry to be a pain, I just wanted to mention that I'm not looking to change the hostname of the vm I'm working on, but just how it does hostname lookups.. have I misunderstood, or is this indeed done via the hostname command?
[05:26] <duderguy> ty for link
[05:26] <kaushal> I install screen on my laptop and then i am on screen ssh username@remoteIP
[05:26] <kaushal> and then the network goes down
[05:27] <kaushal> and then?
[05:27] <histo> kaushal: on the server use screen. So you can reattach after network goes down or from another box
[05:27] <Dr_willis> you will need screen running on the box you are sshed into.
[05:28] <kaushal> ok
[05:28] <konectd> aden_: Are you talking about the nslookup command?
[05:29] <histo> aden_: You would need your own dns or use winbind service
[05:29] <kaushal> so on the laptop I always need to do ssh username@remoteIP?
[05:29] <kaushal> there is no other way?
[05:29] <Dr_willis> its a 2 part setup kaushal ...
[05:29] <Dr_willis> ssh to the server. run screen on the server.. that lets you resume the sesssion IF you get disconected.
[05:29] <kaushal> Dr_willis: yeah i understood on the remote server I am already using screen
[05:29] <betrayd> aden for most commands, if you are unsure, type 'man hostname' in a terminal
[05:30] <konectd> aden_: nslookup will give you everything on your local, even though you're in a vm because it's using the hardwares network adapter.
[05:30] <histo> kaushal: yes you reconnect. You could set something up in your .bashrc to check if you aren't connected to connect but that would be troublesome. There are also keepalive settings on the client and server.  Are you using this for a tunnel or something?
[05:30] <Dr_willis> then you setup whatever client to auto-reconnect (rereun ssh whatever) to get back to the screen session
[05:30] <aden_> konectd: I wanted this to be usable with any command, so I would run "ping server1" and get ping results for "server1.example.com"
[05:31] <aden_> konectd: or "host server1" and have the IP of "server1.example.com" returned
[05:32] <histo> aden_: so add the machiens to your /etc/hosts file is the easiest way
[05:32] <histo> aden_: just create entries ip.address.of.box   hostname
[05:32] <aden_> konectd: so pretty much setting a hostname to append onto incomplete hostname lookups
[05:32] <aden_> aah I see, there's no way to do this on the fly?
[05:33] <histo> aden_: I've told you create your own dns or use winbind
[05:33] <konectd> aden_: resolveip
[05:33] <histo> aden_: depends on yoru network and what type of boxes are there.
[05:33] <konectd> so.. resolveip localhost
[05:34] <konectd> aden_: or resolveip hostname, also you could use dig +short unix.hostname.com
[05:36] <kaushal> histo: its fine
[05:37] <kaushal> then
[05:37] <konectd> aden_: also try "host www.google.com" where google.com is your host.
[05:37] <kaushal> histo: tmux will that solve?
[05:37] <moses_> do you guys know what other is under file permissions?
[05:37] <histo> kaushal: same thing tmux vs screen
[05:37] <histo> moses_: world
[05:38] <moses_> histo: good
[05:38] <kaushal> histo: so actually no escape to type ssh username@remoteserverIP on gnome-terminal?
[05:38] <histo> moses_: anyone that isn't in the user or group
[05:38] <histo> kaushal: you could write a script like "remote" or something that does the command for you then you just type remote
[05:38] <George> Hello guys I need  your help I can't open any application in ubuntu 10.04 I was tryed to upgrade 10.04 to 12.04
[05:39] <kaushal> histo: ok
[05:39] <histo> kaushal: it's your box there unlimitted ways you can configure it.
[05:39] <konectd> George: Have you tried re-installking the upgrade?
[05:39] <kaushal> histo: so any example?
[05:39] <aden_> konectd: I'm trying to set up a domain to automatically be appended to host lookups, so say my domain is google.com, I want to be able to run the command "host rarara" and have the results say "rarara.google.com has address 74.125.237.105"
[05:39] <RA9UEK> Привет!
[05:39] <jony_easyrider> how can I install boinc_7.0.65_i686-pc-linux-gnu.sh in Ubuntu 12.04 desktop?
[05:39] <konectd> aden
 yap it can't continue the upgradation
[05:40] <Dr_willis> jony_easyrider,  its a .sh file.. you run it.   'sh whatever.sh'
[05:40] <konectd> aden_: The last command I gave you does exactly that..
[05:40] <Dr_willis> !find boinc
[05:40] <histo> kaushal: create a file called remote1  in it put #!/bin/bash   and your command on the next line like ssh someuser@somehost  save the file and chmod +x remote1  then you can ./remote1  or put remote1 in your path so you can type it from anywhere.
[05:40] <Dr_willis> !info boinc
[05:40] <Dr_willis> jony_easyrider,  best would be to use the  boinc in the repos...
[05:41] <aden_> thanks konectd :)
[05:41] <konectd> George: DO you have a backup of the origil 10.04 that you tried upgrading?
[05:41] <George> no but i have only CD for ubuntu 10.04
[05:41] <jony_easyrider> Dr_willis, in the repo readme tells me that I should use the package on their website
[05:42] <Dr_willis> jony_easyrider,  if you need the latest.. but that wont get any support from this channel
[05:42] <konectd> George: You're probably going to have to do a fresh install. I would fresh install using a flashdrve using Unetbootin, install 13.04 or 12.04 LTS.
[05:42] <konectd> George: You have tried reboting for the hell of it, right?
[05:43] <konectd> George: *rebooting
[05:43] <George> ok thank you
[05:44] <histo> kaushal: Once your are done sudo cp remote1 /usr/local/bin   then you can type remote1 from anywhere and it will run your command.
[05:46] <jdale> hello
[05:48] <histo> hola
[05:51] <feria90> hi every one
[05:51] <feria90> i have a problem
[05:52] <histo> !ask | feria90
[05:52] <feria90> i set up 1 smtp server to send mail
[05:52] <feria90> but i cant send to inbox gmail
[05:52] <feria90> alway spam
[05:52] <feria90> i had setup Dkim + spf
[05:52] <histo> feria90: Is your IP blacklisted?
[05:52] <feria90> header had pass
[05:52] <feria90> no i got 5 ip
[05:52] <feria90> and i just test 1 time to send
[05:53] <histo> feria90: Have you checked to see if it's been reported and on some of the popular lists
[05:53] <feria90> noway ip be blacklist
[05:53] <histo> famous last words
[05:53] <histo> feria90: http://www.mxtoolbox.com/blacklists.aspx
[05:54] <feria90> okey let i check
[05:54] <feria90> thanks histo
[05:54] <histo> feria90: also make sure your spf record is proper.
[05:55] <feria90> Received-SPF: pass (domain of vietnix.net designates
[05:56] <feria90> i check header of email i send test
[05:56] <feria90> spf and dkim sure pass
[05:56] <feria90> i think may ne conten have problem
[05:57] <feria90> but i dunt know no to check my conten
[06:00] <moses_> chown -c :group file
[06:00] <moses_> will that give full access to the group ?
[06:01] <histo> feria90: use mxtools they have plenty of other tools
[06:01] <histo> moses_: only if the file is set to rwx for the group
[06:02] <moses_> using chmod
[06:02] <moses_> ?
[06:02] <histo> moses_: yes
[06:02] <feria90> okey tanks histo i will try :D
[06:03] <histo> moses_: so chmod g+rwx file && chown :group file  would give the "group" full access to read write and execute
[06:03] <moses_> how would i view the current permissions of files?
[06:03] <histo> moses_: ls -l files
[06:03] <moses_> histo: is that the same as chmod -------rwx
[06:04] <histo> moses_: no that would be chmod o+rwx
[06:04] <histo> moses_: ugo
[06:04] <moses_> oh true group is second
[06:04] <histo> moses_: you can also use octal numbers
[06:05] <moses_> its not working :(
[06:06] <moses_> im doing sudo chmod -rwxrwxrwx file
[06:07] <Erealz> anyone experiencing high pitch audio from youtube? was there a recent audio update to ubuntu?
[06:08] <Erealz> yes no maybe?
[06:08] <histo> moses_: sudo chmod ugo+rwx somefile
[06:08] <Erealz> any game of throne fan here?
[06:11] <raid_> Is RAID setup still supported by Ubuntu? I can't find anything even remotely recent about it (all the guides on Google are coming up for like, 5.10)
[06:11] <Gnea> !raid
[06:12] <moses_> histo: that seems to be the only way to change permissions
[06:12] <moses_> ty it worked
[06:14] <raid_> Gnea: huh, well thats 9.10, but its still noted as being years out of date :/
[06:15] <moses_> question
[06:15] <moses_> how do i make the chmod editing apply to all directories and files inside the directory?
[06:16] <amarcolino> how do I change partial name of a file? For example the files all start with foobar-blahblah but I want them to be foo-blahblah
[06:17] <adeebnqo> moses_ : chmod editing? changing permissions for files and subdirectories?
[06:17] <amarcolino> moses_ using the -R  with the command
[06:17] <lasers> amarcolino: mv foobar-blahblah foo-blahblah
[06:17] <SwedeMike> amarcolino: you generally have to write a oneliner shellscript to do that.
[06:18] <SwedeMike> lasers: that doesn't work with wildcards.
[06:18] <Dr_willis> amarcolino,   tab completion can help get the name in for you to edit.  if you got a lot of files to rename following a pattern. theres other tools
[06:18] <Dr_willis> !info rename-utils
[06:18] <Dr_willis> !find qmv
[06:18] <Dr_willis> !info renameutils
[06:19] <Gnea> raid_: what version are you on?
[06:20] <amarcolino> moses_, just like adeebnqo asked, what do you mean by editing, I hope you mean changing file permission because what i've told you could be bad with other coommands
[06:20] <amarcolino> Dr_willis, lasers, SwedeMike, thanks
[06:22] <histo> moses_: -R will be recursive for all files and directories below
[06:22] <raid_> Gnea: I'm going to reinstall from scratch; gonna go with 12.04
[06:23] <raid_> (the existing install actually is 9.10 >_>)
[06:23] <moses_> its working perfectly
[06:23] <histo> !eol | raid_
[06:23] <Gnea> !lts
[06:23] <ak5> hi, in CLI, where do I see all the services and which start at boot?
[06:24] <moses_> question how come other doesnt get write automatically when i make a new folder what preset is this?
[06:24] <histo> moses_: you could have chmod 777  to get rwxrwxrwx  or use the ugo+rwx   It's up to you. You can man chmod and read about using the numbers instead if you want.
[06:24] <raid_> histo: I know; hence siezing the oppertunity to finally install the latest LTS. Problem is, there is nothing I can find about setting up RAID on versions newer than my existing 9.10, the docs are years out of date
[06:24] <ak5> histo: why do you recommend chmod777
[06:24] <ak5> thats never a real solution
[06:24] <histo> ak5: It's what he asked for.
[06:24] <ak5> :/
[06:25] <Gnea> ak5: actually, 777 is a real solution
[06:25] <ak5> Gnea: to what problem?
[06:25] <Gnea> ak5: let's worry about your problem.
[06:25] <ak5> Gnea: ok :)
[06:25] <raid_> Ahh, chmod 777; AKA "Windoze Mode" :P
[06:26] <ak5> Gnea: any ideas? I am not sure how to actually use upstart, if you can give me the docs, that would be fine too, all I can find on google is blogposts on "why upstart rulez/suckz"
[06:27] <moses_> the man doesnt say anything about numbers :/
[06:27] <Gnea> ak5: well http://upstart.ubuntu.com/cookbook/ will give you every last little detail
[06:27] <ak5> ty
[06:28] <cristian_c> Hi
[06:28] <cristian_c> There is a mysterious problem with my laptop. I mean, when I run the suspension, after the restore there are problems. The first of which is that the Chromium browser will no longer open (but it also does with Chrome) and if you launch it from the terminal, an error is returned
[06:28] <histo> moses_: this is a good read https://help.ubuntu.com/community/FilePermissions
[06:28] <cristian_c> Also, when I try to logout or reboot the pc freezes, meaning that when I try to restart, the screen goes black and hangs there indefinitely (in the case of the log, it appears the shell with the messages, but it hangs too) and I have to brutally shut down the pc
[06:29] <cristian_c> I tried several solutions, from uswsusp to tuxonice, to create a special file in /etc/pm/config.d/, but these attempts have not been successful. I also checked the syslog, but also did not provide significant information about the origin of the problem
[06:29] <cristian_c> Any ideas?
[06:29] <Dr_willis> other then stop using suspend because its flakey.. ;) i imagine..
[06:29] <histo> moses_: also using the letters a+rwx would be less typing then ugo
[06:29] <histo> moses_: it says in the man page you can use octal
[06:30] <raid_> Any ideas about the current state of RAID support? Or am I just gonna have to wing it tomorrow morning and hope the process hasn't changed in 4-8 years? >_>
[06:30] <histo> raid_: why kind of raid hardware or software based?
[06:30] <raid_> Software
[06:30] <cristian_c> Dr_willis, flakey?
[06:31] <Dr_willis> cristian_c,  dosent seem it works very well
[06:32] <Dr_willis> i imagine some hardware drivers are crashing and causing all the other issues.
[06:32] <Dr_willis> its Possible a newer kernel may fix some things
[06:33] <moses_> when i chmod the directory any new files that are made in the directory still down allow o+w
[06:33] <moses_> i am bad
[06:33] <histo> moses_: umask
[06:33] <moses_> i will man that
[06:33] <cristian_c> Dr_willis, there have been many updates of the kernel in my release in these months
[06:34] <cristian_c> Dr_willis, I'll try to get info about driver problems
[06:34] <cristian_c> :)
[06:35] <histo> moses_: umask gets co9nfusing because it is backwards from chmod
[06:35] <histo> moses_: http://askubuntu.com/questions/44534/how-to-set-umask-for-a-specific-folder
[06:36] <histo> moses_: just make sure o-rwx on the directory then no one but your user and group can get in there.
[06:37] <moses_> I am just playing right now
[06:38] <moses_> currently there will be a group that SSH into this comp and uses the code
[06:38] <moses_> i just dont want any problems
[06:38] <Dr_willis> cristian_c,  theres the 3.9 mainstream kernel ppas also.
[06:39] <cristian_c> Dr_willis, I'm using 12.04
[06:39] <cristian_c> Dr_willis, 3.2.0-41-generic
[06:40] <cristian_c> Dr_willis, are there 3.9 kernels for precise?
[06:43] <histo> moses_: just be careful with ssh  if you are opening it up to the public I recommend installing fail2ban and possibly changing the default port.
[06:43] <histo> moses_: you may also want to look into jailing the users
[06:45] <fagner> test
[06:45] <histo> fagner: pong
[06:45] <Prufrock> Hello everyone.
[06:48] <Prufrock> I have this weird problem. The system keeps telling that it has encountered an error, ans when I open synaptic, it crashes and shows me this error message: http://paste.ubuntu.com/5705924/
[06:48] <Prufrock> How do I go about solving this? Could be some sort of a virus?? :/
[06:48] <histo> Prufrock: sudo apt-get update
[06:49] <Dr_willis> Prufrock,  virus - very unlikely
[06:49] <fagner> alguém aí do Brasil ?
[06:49] <histo> !pr
[06:49] <Prufrock> histo, Dr_willis, thank you very much :)
[06:49] <histo> !br | fagner
[06:54] <ak5> is "use" portuguese??
[06:54] <ak5> craaaaaazy, baby
[06:54] <histo> ak5: huh?
[06:54] <ak5> !en
[06:54] <ak5> !de
[06:55] <ak5> the br has "use #ubuntu-pt" I am just wondering if thats actually portuguese
[07:03] <icedwater> ak5: probably just not a finished translation, though it might actually be correct.
[07:03] <justawhoaday> L a the fucking L bitches in my dick
[07:03] <justawhoaday> Bitches in my dick
[07:03] <justawhoaday> Where u at, taihsiang
[07:04] <ak5> icedwater: maybe
[07:04] <justawhoaday> Muh duk
[07:04] <icedwater> justawhoaday: right.
[07:04] <qin> justawhoaday: ?
[07:04]  * justawhoaday drinks some icedwhater
[07:04] <justawhoaday> That's some goood stuff
[07:04] <justawhoaday> Uh huh
[07:05] <icedwater> Don't whate the player, whate the game.
[07:05] <icedwater> Also, if you don't have an ubuntu support question, please go somewhere else.
[07:07] <wylde> ckserv identify halibut2
[07:08] <Saiki> welp, now we have his password lol
[07:19] <icedwater> Oh dear :P
[07:19] <cristian_> holaaa
[07:20] <pepee> hi. there seems to be something wrong with the ubuntu.com website: http://www.ubuntu.com/business/desktop/overview
[07:21] <pepee> a loop...
[07:21] <aeon-ltd> correct link? http://www.ubuntu.com/desktop/business
[07:21] <pepee> I got the link from here:  https://wiki.ubuntu.com/ARM
[07:22] <pepee> aeon-ltd, yeah, seems to be an old link. anyway, I just wanted to warn you
[07:22] <aeon-ltd> last edited 2012
[07:25] <Prufrock> After doing a "apt-get update", I got this message: http://pastebin.ubuntu.com/5706005/
[07:25] <Prufrock> What could be the problem?
[07:26] <aeon-ltd> it says on the 2nd line
[07:27] <Prufrock> So how do I fix it?
[07:28] <pepee> Prufrock, try: sudo rm -r /var/lib/apt/lists/*
[07:28] <aeon-ltd> you need the right keys
[07:28] <Prufrock> pepee, ok. Then?
[07:29] <Dr_willis> !pgp
[07:29] <Dr_willis> !keys
[07:29] <Dr_willis> Hmm.. thts some repo key factoid..
[07:29] <Dr_willis> or askubuntu.com answers it in detail
[07:33] <greenmang0> hi friends, what's the right way to calculate total number of files descriptors opened by a process?
[07:34] <greenmang0> people use "ls -1 /proc/PID/fd | wc -l" but there are dead symlinks in /prod/PID/fd directory
[07:36] <bhavesh> When I launch my fullscreen game in wine in ubuntu 13.04, the first time when it opens the unity top bar and unity sidebar are still there. But when I close it and open it again they disappear and I enjoy complete fullscreen
[07:37] <bhavesh> also my resolution changes from default 1366x768 to 800x600 while launching the game
[07:37] <bhavesh> when I quit it, its still on 800x600 and maybe thats why when I relaunch it the top bar and sidebar disappear. How am I supposed to fix this?
[07:37] <bazhang> !appdb | bhavesh
[07:37] <bhavesh> okay
[07:37] <Dr_willis> ive seen people setup scripts that call xrandr after the game exits to reset back to what is needed
[07:38] <bazhang> bhavesh, /join #winehq
[07:38] <bhavesh> Dr_willis : I did that, my problem is with sidebar and top bar not disappearing
[07:38] <bhavesh> when the game starts the first time
[07:39] <Dr_willis> seen mention of that issue on askubuntu.com  and  i think when watching movies   similer issue on omgubuntu and webupd8
[07:39] <bhavesh> okay
[07:39] <A1Recon1> Say I want to ssh tunnel to my computer at home... will i need to change any settings on my router at home??
[07:40] <Dr_willis> you need to enable port forwarding from the router to the proper pc
[07:40] <Dr_willis> and you may want to change the default ssh port to be used also. or forward from somthing other then the ssh port to the pc.
[07:40] <wildwind> A1Recon1: you need to forward ssh port (22) to your machine
[07:41] <A1Recon1> wildwind: OK
[07:41] <Dr_willis> ive seen where people ssh into the router (frm outside) on port 3322 for example.. then the router forwards 3322 to 22 on the iternal pc.
[07:41] <Dr_willis> you could set up othe rules to let you get to other pcs on the lan
[07:43] <wildwind> A1Recon1: and remember the risks of hacking, if your password is weak for ex.
[07:43] <Dr_willis> key based login is a good idea..
[07:43] <Dr_willis> and  the various fail2ban or other auto-blocker tools are handy
[07:44] <foofoobar> Hi. On my macbook I resized my SSD and created a 20GB partition for ubuntu. I now noticed that I want more space for the ubuntu parition.
[07:45] <foofoobar> Under OSX I can resize my main partition (OSX) without any problems, but I cant increase the size of the ubuntu parition, because I cant move the "start" of the partition
[07:45] <foofoobar> What can I do now?
[07:45] <Dr_willis> use gparted from a live cd
[07:45] <Dr_willis> use os-x to shrink the one.. boot live cd.. use gparted to enlarge other..
[07:49] <siriusnova> I <3 ubuntu its so nice :D
[07:50] <raid_> Anyone happen to by off chance know US retailors that might stock 4TB drives? :/
[07:51] <foofoobar> Dr_willis: so it's not a problem to move the "beginning" of a partition?
[08:03] <shape> Hi, im trying to set GRUB tty resolution after Nvidia drivers and they say "Note that you can only use modes which your graphics card supports via VESA BIOS Extensions (VBE), so for example native LCD panel resolutions may not be available. " I treid GRUB_GFXMODE=1920x1080,1024x768,auto didnt work
[08:07] <Dr_willis> nvidia drivers wouldent affect the GRUB res/display.. since grub is befor they load
[08:07] <Dr_willis> but differnt cards/monitor combox can handle different res's
[08:08] <shape> Dr_willis: https://wiki.archlinux.org/index.php/NVIDIA#Fixing_Terminal_Resolution
[08:08] <shape> "Transitioning from nouveau may cause your startup terminal to display at a lower resolution."
[08:09] <administrator_> anyone runing  Antenna DTV   http://antenna-dtv.sourceforge.net/developers.html in ubuntu 12.04 i can run it but click on the channels and noting happens.
[08:10] <auronandace> shape: grub is before the graphics driver is loaded hence why it mentions vesa bios extensions (it really depends on your card)
[08:10] <auronandace> and bios
[08:11] <shape> auronandace: yep, i found the fix btw, need to add vga=ask and see what it supports
[08:14] <vitimiti> hi o/
[08:15] <jatt> hi, I have the following process running:
[08:15] <jatt> lp        1474  2.2  0.0   7288  1352 ?        S    10:05   0:10 --macaddr 00-1E-8F-E9-34-95 --user michael --job inbound Emacs buffer --model 362
[08:15] <jatt> it is running something with --user michael
[08:15] <jatt> but I don't have user michael anywhere on my machine
[08:15] <jatt> what could it be?
[08:15] <jatt> maybe...
[08:15] <jatt> ...an attack?
[08:16] <wildwind> jatt: what command's output is this?
[08:21] <jatt> I did
[08:21] <jatt> ps aux | grep michael
[08:21] <jatt> after booting my machine
[08:22] <auronandace> jatt: how did you know to look for michael?
[08:23] <wildwind> jatt: lp is spooler usually
[08:24] <renaissance> hello there
[08:25] <jatt> auronandace: because I noticed it before when running ps | aux without grepping anything
[08:25] <wildwind> jatt: getent passwd michael
[08:27] <jatt> wildwind: I ran getent passwd michael and got no output
[08:27] <auronandace> jatt: are you running a printer on that machine?
[08:28] <jatt> I have a wireless printer at home yes I use with this machine
[08:29] <auronandace> jatt: is it set to be shared with others? can other computers on the network print from it?
[08:29] <jatt> my machine has only one user (me) and I'm the only one using it
[08:31] <wildwind> jatt: is that jour MAC address?
[08:33] <energizer> What do I need in order to set up a remote desktop server?
[08:33] <Dr_willis> is this on a school lan? or home network?
[08:33] <foofoobar> Dr_willis: so it's not a problem to move the "beginning" of a partition?
[08:33] <Dr_willis> energizer,  install vnc, or freenx would be the basics of it.
[08:34] <wildwind> jatt: sudo netstat -4Wpnl |sort -k 7
[08:34] <Dr_willis> foofoobar,  cant say ive ever had any issues with it.
[08:34] <wildwind> jatt: sudo netstat -6Wpnl |sort -k 7
[08:34] <Dr_willis> foofoobar,  i tend to keep my disk layouts very simple.
[08:35] <energizer> Dr_willis thank you!
[08:35] <jatt> wildwind: how do I tell my MAC address?
[08:36] <Lunito> Good morning, I'm having some problems with my 13.04 desktop install, i just get the vertical stripes desktop background after login and nothing else happens.I see a ton of pulseaudio and xfwm4 processes. shouldn't there be only one? and I see rtkit-daemon policykit complaining about "call failed. did not receive a reply"
[08:36] <Lunito> any ideas?
[08:36] <foofoobar> Dr_willis: okay thanks
[08:36] <jatt> is a home network
[08:36] <Lunito> the vertical stripes disappeared after a few minutes but that could be because I killed some processes
[08:37] <Lunito> i got the normal plain desktop background after that but no sign of the xfce stuff
[08:37] <wildwind> jatt: ifconfig eth0
[08:37] <Lunito> no panel, no window manager, nada
[08:38] <jatt> ifconfig says:
[08:38] <jatt> I'm running no command when I boot my machine and I
[08:38] <jatt> and the suspicious command says:
[08:38] <jatt> --macaddr 00-1E-8F-E9-34-95 --user michael --job inbound Emacs buffer
[08:38] <FloodBot1> jatt: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[08:38] <jatt> sorry ifconfig:
[08:38] <jatt> HWaddr d8:d3:85:9a:68:3a
[08:40] <Sarcastic> Hi can anyone help me with some technical issues with AMD Drivers?
[08:41] <Sarcastic> i've got a problem with my HD 5450 radeon graphics card
[08:41] <wildwind> !ask | Sarcastic
[08:42] <mymusise> how a ant is intelligence in ant  algorithm
[08:42] <Sarcastic> I'm trying to find how to install it, and the only helpful thing I've found so far is this: http://askubuntu.com/questions/124292/what-is-the-correct-way-to-install-ati-catalyst-video-drivers-fglrx/129200#129200. However if I do that it comes up with an error saying "DKMS part failed" and after reboot I get no unity
[08:42] <Sarcastic> I'm running on Ubuntu 12.10 64-bit
[08:43] <mymusise> how a ant is intelligence in ant  algorithm?have someone konw?
[08:45] <Lunito> ok let me rephrase that: what could be the cause of the system starting 10+ pulseaudio deamons and 10+ xfwm4 processes
[08:45] <wildwind> Sarcastic: grep kms /var/log/kern.log
[08:45] <Sarcastic> Is that a terminal command?
[08:45] <wildwind> Sarcastic: yes
[08:46] <Sarcastic> I also heard that I need to install linux-headers-generic?
[08:46] <Sarcastic> Would that help?
[08:46] <wildwind> Sarcastic: don't you have it already?
[08:47] <Sarcastic> No
[08:47] <Sarcastic> I don't think so
[08:47] <cristian_c> Hi
[08:47] <mymusise> some one konw ant algorithm here?
[08:47] <Sarcastic> I'll check if I can install it
[08:47] <cristian_c> How can I switch audio from mono to stereo?
[08:47] <cristian_c> Any ideas?
[08:48] <wildwind> Sarcastic: you should if you update regularly, including kernel
[08:48] <wildwind> mymusise: this is not an algorithmic channel
[08:49] <Sarcastic> wildwind i'm on a fresh reinstall of ubuntu, because I did this method and after reboot my monitor said input not supported: http://www.thefanclub.co.za/how-to/ubuntu-amd-catalyst-install
[08:49] <wildwind> jatt: what about netstat?
[08:51] <jatt> wildwind: I don
[08:51] <jatt> 't see anything suspicious in the netstat output there is something special I need to pay attention to?
[08:52] <mymusise> oh,thank you ,could you tell where is the algorithm channel?I can't find it .
[08:53] <wildwind> jatt: pids, commands, unusual ports etc. or just pastebin it
[08:54] <wildwind> mymusise: stackoverflow.com is a good starting point
[08:54] <Sarcastic> Wildwind, does it matter when I install linux-headers-generic during the catalyst installation?
[08:56] <wildwind> Sarcastic: not really
[08:56] <music> hello
[08:56] <cfhowlett> music greetings
[08:57] <wildwind> Sarcastic: graphics drivers often fail on certain kernel versions. you can try earlier or later (beta) versions
[08:57] <mymusise> thanks!
[08:57] <yellabs-r2> my resolution ( first boot ) is off,  gdm ? how can i put it right ? the desktop has the correct resolution ..
[08:57] <Sarcastic> What do you suggest I do then?
[08:58] <Sarcastic> I've just done the grep kms /var/log/kern.log command and now installing linux-headers-generic
[08:59] <wildwind> Sarcastic: google ati <chip> fglrx <error>, read, try
[09:00] <wildwind> Sarcastic: has grep shown anything?
[09:00] <Sarcastic>  imklog 5.8.6, log source = /proc/kmsg started.
[09:01] <wildwind> Sarcastic: not relevant
[09:01] <Sarcastic> What do you mean, sorry?
[09:02] <yellabs-r2> is the ubuntu login screen called gdm ?
[09:03] <wildwind> Sarcastic: i suggest to search internet for similar problem reports and try solutions other people confirm to help.
[09:04] <Sarcastic> Yeah
[09:04] <Sarcastic> It seems that the HD 5450 is either quite rare in the Ubuntu community or mine is faulty with Ubuntu
[09:04] <Sarcastic> I'll reboot to see what happens
[09:05] <stat_vi> yellabs-r2: no, it's the display manager and yes, it serves the login screen
[09:05] <creativeoS> Hi everyone. I need evolution to mirror my number of gmail accounts. This morning I tried sending an email and marked one for deletion. When I checked gmail in Firefox browser it didn't mirror these actions. (No sent mail and nothing in trash) Any help appreciated.
[09:06] <yellabs-r2> or is it lightdm ?
[09:07] <stat_vi> depends on what you've installed or what distro you use. Ubuntu uses lightdm sinde 11.10 (i think)
[09:07] <stat_vi> s/sinde/since/
[09:10] <Sarcastic> Wildwind it restarted with no unity
[09:10] <music> how is every one
[09:11] <wildwind> Sarcastic: Sarcastic: check this for ex. http://askubuntu.com/questions/164495/graphics-drivers-for-ati-radeon-5450
[09:11] <Aethysius> I hate Unity.
[09:11] <Aethysius> Kubuntu, ftw.
[09:12] <Yaakovi> When is the Ubuntu Phone OS supposed to come out? This month?
[09:12] <Sarcastic> wild do i type that into the xorg file
[09:12] <DarsVaeda> hi I installed ubuntu 13.04 few days ago, now suddenly the system is very slow and I get this error when doing sudo "sudo: effective uid is not 0, is sudo installed setuid root?"
[09:12] <DarsVaeda> I wonder what went wrong and if I can fix it or need to reinstall?
[09:13] <captianyipe> Yaakovi, Ubuntu Phone OS is still in active development. The goal is to get a daily usable version out by the end of the month. This does not mean its anywhere ready for general release
[09:13] <Yaakovi> Hopefully it is finally here
[09:14] <malembe> Hello can you help me
[09:14] <cfhowlett> Yaakovi, have reasonable expectations for v. 1.0
[09:14] <cfhowlett> malembe, greetings
[09:14] <Yaakovi> I do.
[09:14] <Yaakovi> I don't expect anything to work.
[09:14] <Yaakovi> But I would like to at least boot an emulator up.
[09:14] <Myrtti> !touch
[09:16] <ils> yo
[09:16] <DarsVaeda> the system is slow because cupsd runs 99% of cpu
[09:16] <DarsVaeda> what is that process doing?
[09:16] <ils> kastoi
[09:16] <gravin> ils, nachave d'ici
[09:17] <ils> tagueul
[09:17] <cfhowlett> !english
[09:19] <captianyipe> DarsVaeda, cupsd schedules print jobs for a later time. Are you trying to print something?
[09:19] <DarsVaeda> nope
[09:19] <DarsVaeda> I guess it is related to the permission issue
[09:20] <DarsVaeda> as far as I get something must have changed permissions of /usr
[09:21] <coolot> hello guys! newbie here.... need some help
[09:21] <cfhowlett> !details|Coolot
[09:23] <coolot> i am trying to find all of my ACDC mp3 files using the command line but i am getting all of my mp3 files. i am running ubuntu 12.04
[09:24] <coolot> i am just using find command
[09:25] <coolot> i am practicing how to use the terminal instead of using the gui
[09:26] <captianyipe> coolot, a good habit to get into is to use the man command. To see how to use find, type man find
[09:26] <cfhowlett> coolot, unless the song title contains ACDC, you'd need to search the metadata ...
[09:27] <cha0z1> hi is there a way to have a systray icon for skype in 13.04?
[09:28] <captianyipe> cha0z1, yes. Its there by default. Are you using unity?
[09:28] <cha0z1> ca;
[09:28] <cha0z1> l
[09:28] <coolot> thanks.... will try to understand it using man
[09:28] <SarcasticGoats> Guys I'm having more difficulties with my HD 5450 Graphics card
[09:28] <cha0z1> captianyipe, yes i have ubuntu 13.04 (upgraded from 12.10) with unity. before the upgrade in 12.10 the icon was there!! i have reinstalled skype but no luck
[09:30] <SarcasticGoats> I've tried to install the ATI drivers with this: http://askubuntu.com/questions/124292/what-is-the-correct-way-to-install-ati-catalyst-video-drivers-fglrx. I'm running 64-bit Ubuntu and now there is no Unity
[09:30] <cha0z1> captianyipe, i have 64bit version. What version do you have
[09:30] <captianyipe> cha0z1, did you completely reinstall skype by typing "sudo apt-get purge skype" into terminal? it will remove all of skypes settings and reset
[09:31] <captianyipe> cha0z1, I use the 32 bit version. It shouldnt matter as the skype package is mulitarch
[09:31] <cha0z1> captianyipe, yes apt-get remove --purge skype and reinstall from website
[09:31] <cha0z1> captianyipe, because i can't install skype from apt-get install skype (package not found)
[09:31] <cfhowlett> !repos|cha0z1,
[09:31] <captianyipe> cha0z1, thats correct. Skype is not in the ubuntu repos
[09:32] <cha0z1> http://www.unity.li/2013/04/microsoft-ask-ubuntu-to-remove-skype-icon-from-system/
[09:32] <cha0z1> maybe this ^^^^ captianyipe ubottu
[09:32] <cha0z1> I want to find a hack to fix that :P
[09:32] <cfhowlett> cha0z1, enable ubuntu partner repos.   it's there.
[09:33] <cha0z1> cfhowlett, doing it now :)
[09:34] <ezra-s> another offtopic about skype in case anyone wants to know -> skype backdoor confirmation -> http://lists.randombit.net/pipermail/cryptography/2013-May/004224.html
[09:36] <fat> i want to create a mail server in ubuntu, but i dont want to manually create all the email accounts. i want my users to create their own emails, is this possible?
[09:36] <Corey> fat: Let me borrow a factoid from another channel.
[09:36] <Corey> fat: why" : are you sure that installing, configuring and maintaining a mailserver is really what you want to do  here? it's not something that's for the faint of heart, and definitely not something for folks that are still just  learning the basics of linux or unix.
[09:37] <fat> im a php developer
[09:37] <Corey> fat: That sounds remarkably unlike "mail administrator."
[09:37] <ezra-s> fat, ask a linux admin to do it for you
[09:37] <fat> im good with linux i think
[09:38] <sharkwoof1996> i cant update from 12.04lts to 13.04 useing the update manger
[09:38] <hurdvm> sharkwoof1996: you are meant to go from 12.04 to 12.10 then to 13.04
[09:39] <sharkwoof1996>   hurdvm no 12.04 to 13.04
[09:39] <gads> any network speed applet for ubuntu?
[09:39] <ezra-s> fat, I don't remember much but I think most MTA's relay on real accounts on a machine to deliver mail, if what you want is out of the same box accounts you will need some real admin of the mta
[09:40] <hurdvm> sharkwoof1996: a direct upgrade like that isn't supported
[09:40] <hurdvm> sharkwoof1996: you have to go through 12.10 first
[09:40] <Corey> fat: You either need to define real user accounts, or establish virtual users if you don't want to use system users.
[09:40] <sharkwoof1996> hurdvm, well it says in update manger
[09:41] <gads> any network speed applet for ubuntu ? why is it so hard to find one?
[09:41] <cfhowlett> gads, speedtest.net
[09:42] <captianyipe> gads, try conky: http://conky.sourceforge.net/
[09:42] <ezra-s> gads, gkrellm also have network monitors
[09:42] <cfhowlett> sharkwoof1996, it's suggesting you update to the latest version .... if you want to keep 12.04 (and I would advise you to as it's LTS) set your update settings to LTS only
[09:43] <ezra-s> there are quite a few, it doesn't take much looking for I believe
[09:43] <sharkwoof1996> cfhowlett, thanks but i want to upgrade
[09:43] <cfhowlett> sharkwoof1996, download the iso, make a boot usb/cdrom, boot that in install
[09:44] <cfhowlett> sharkwoof1996, torrent download is preferrable over direct download ...
[09:44] <gads> captainyipe , actually i want network in and out indicator on top bar
[09:44] <larsemil> for some reason my install put sv_US.ISO-8859-1 as locale. i dont find the file where this is set.???
[09:45] <gads> network data flow indicator on top bar
[09:45] <captianyipe> gads, like in old-school GNOME2 where you could add the system resource monitor as a applet?
[09:45] <larsemil> i want to change it
[09:45] <sharkwoof1996> cfhowlett, hurdvm thaaanks guys for your help
[09:45] <gads> yes
[09:45] <cfhowlett> sharkwoof1996, best of luck
[09:45] <sharkwoof1996> cfhowlett, thanks
[09:46] <ezra-s> gads, here, a conky setup I took, you can remove the things you don't want easily -> http://paste.ubuntu.com/5706277/
[09:46] <hurdvm> gads: i wouldn't know how to do that in unity but i know you can in xfce
[09:46] <gads> i found one the called indicator-sysmonitor but it only show cpu and mem
[09:46] <gads> i dont know the code for network
[09:47] <captianyipe> gads try indicator-multiload
[09:47] <gads> the mulitload showing graph instead of number
[09:47] <gads> i mean numeric value
[09:48] <ezra-s> gads, I pasted you a conky config which does all you need
[09:48] <gads> ezra-s how to use that?
[09:49] <ezra-s> gads, sudo apt-get install conky-all
[09:49] <ezra-s> put that into a .conkyrc file in your home folder
[09:49] <ezra-s> launch conky
[09:50] <m11> hi i am trying ubuntu (rather linux for the first time ), i did installled ubuntu 12.04 version , after that i did sudo apt-get update   and
[09:50] <m11> sudo apt-get install vlc
[09:50] <m11>  but when i did sudo apt-get install ubuntu-restricted-extras
[09:50] <m11> it is showing me error  Could not get lock /var/lib/dpkg/lock,
[09:50] <m11> but ps command shows only 2 processes running  ie, ps and bash
[09:50] <FloodBot1> m11: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[09:50] <ezra-s> once you are satisfied you can add conky to your start up applications like this: sleep 20 && conky -d -c ~/.conkyrc
[09:50] <m11> okiee sorry for that :P
[09:50] <cfhowlett> m11, you have an incomplete process somehwere that has locked your dpkg ...
[09:50] <hurdvm> m11: you have more than one package manager running at the same time?
[09:50] <gads> ezra-s does that put an indicator on top bar?
[09:51] <m11> no only processe running are ps and bash
[09:51] <ezra-s> m11, try "ps aux | grep -i dpkg"
[09:51] <cfhowlett> m11, probably your update manager is set to automatic.
[09:51] <ezra-s> gads, a top horizontal bar bellow the top bar of ubuntu, in the url in that file you can see an image
[09:52] <m11>  cfhowlett  it is showing rrr       2708  2.0  0.1   4368   844 pts/0    S+   02:51   0:00 grep --color=auto -i dpkg
[09:52] <hurdvm> m11: so thats just your grep
[09:53] <m11> so should i kill that process
[09:53] <m11> or what shold i do to unlock dpkg taht is giving the error
[09:53] <m11> should ^
[09:53] <captianyipe> m11, its already dead. That process is you looking for anything to do with dpkg
[09:53] <hurdvm> m11: no, that is the command you just issued (your grep to see what was running)
[09:54] <m11> i did gave the command sudo apt-get again and this time it worked :D
[09:54] <gads> ok thanks by
[09:54] <hurdvm> m11: can you please pastebin the output of ps aux
[09:54] <m11> thankyou
[09:54] <hurdvm> m11: goody
[09:54] <floogy> maybe there's a stale lockfile under /var/run
[09:54] <m11> yes sure i will keep that in mind hurdvm  :)
[09:55]  * ezra-s sighs
[09:55] <m11> floogy:  whats that mean
[09:55] <m11> and how to detect / remove it if it gives problem next time
[09:55] <floogy> If dpkg dies unexpectly, there are maybe some stale lockfiles leftover
[09:56] <floogy> But it works again, I notice
[09:56] <hurdvm> m11: it was probably unfortunate timing on your part (an update might have been happening when you tried to install something)
[09:56] <m11> got it floogy ,
[09:57] <m11> yes hurdvm  but now its giving me another error
[09:57] <m11> or may be conformation message
[09:57] <m11> pasting it to pastee
[09:58] <doomlord> can anyone recomend a cpu temp monitoring method for ubuntu
[09:58] <m11> http://pastie.org/7967593
[09:58] <doomlord> i'm going to mess with psy/grpahiics card and want to check everything is ok afterward..
[09:58] <m11> do not know how to do ok to it :|
[09:59] <mrlo> mais par les fenetres, il n'entre pas encore qd mm?
[09:59] <hurdvm> !fr | mrlo
[10:00] <hurdvm> m11: have you used a pastebin before?
[10:00] <mrlo> Sorry, wrong channel :p
[10:00] <m11> i used pastie here hurdvm
[10:00] <hurdvm> m11: the site says nothing is there
[10:00] <boob00> hi
[10:01] <m11> okay putting it on pastebin now
[10:01] <boob00> i have ruined disk on key, and there are files i need on it, as first i dd the disk to a data block on linux, now, is there any good utility to "browse" that block of data file?
[10:01] <_mote_> how to remove recent chat history in skype 4.2 ubuntu 13.04?
[10:02] <_mote_> or even recent chat
[10:02] <cfhowlett> boob00, I would image it with dd and work the image.  preserve the source media just in case ...
[10:02] <cfhowlett> _mote_, look in your /home for .skype folders
[10:02] <m11> http://pastebin.com/bgCXu8SA
[10:02] <cfhowlett> _mote_, the location should be stated in skype settings
[10:03] <m11> here is it , how to do ok on this
[10:03] <_mote_> im looking at it.
[10:03] <hurdvm> m11: use tab to select ok and press enter
[10:03] <cfhowlett> _mote_, also I think you can delete directly within skype
[10:03] <hurdvm> m11: thats just an eula for microsofts fonts
[10:03] <m11> that was easy :P  thanks hurdvm
[10:03] <_mote_> im not used to using skype. i will try to look over this one. thanks for the info. :)
[10:06] <boob00> cfhowlett: i have now output of 4GB file.img, the question is how i deal with it...
[10:07] <cfhowlett> boob00, I'm afraid data recovery is over my head ... ask in the channel
[10:07] <boob00> cfhowlett: ok thanks :)
[10:11] <shomon> hi, how can I install java 7 on ubuntu?
[10:12] <hurdvm> !java | shomon
[10:12] <shomon> thanks hurdvm
[10:16] <SarcasticGoats> Hey everyone, I tried installing AMD Drivers for my Radeon 5450, but now when I turn the computer on my acer monitor shows "Input Not Supported". Running Ubuntu 12.10 64-bit
[10:17] <jony_easyrider> I need a free font which has symbols
[10:17] <ezra-s> SarcasticGoats, input? are you sure it is related? graphic cards are "output" devices, not input ones.
[10:17] <SarcasticGoats> It worked before I installed the fglrx proprietary drivers
[10:17] <SarcasticGoats> I've had to go through the same procedure a lot of times with the same result.
[10:18] <SarcasticGoats> I found this guide to change a line in the GRUB menu but that didn't work
[10:18] <ezra-s> SarcasticGoats, If I were you I'd check /etc/X11/xorg.conf and /var/log/Xorg.0.log
[10:19] <ezra-s> probably the last one will give you clues about what's failing and why
[10:19] <SarcasticGoats> I can't get into the desktop though
[10:19] <ezra-s> SarcasticGoats, from the terminal, you can access the terminal, can't you?
[10:19] <floogy> SarcasticGoats, you are in the console now?
[10:19] <SarcasticGoats> No
[10:20] <SarcasticGoats> I'm on my windows partition atm
[10:20] <ezra-s> SarcasticGoats, CTRL+ALT+F1 even?
[10:20] <floogy> You've load windows?
[10:20] <ezra-s> ohh
[10:20] <SarcasticGoats> I had windows originally, I freed some space for a partition
[10:20] <SarcasticGoats> and successfully installed ubuntu on it
[10:21] <floogy> If you try to load ubuntu, what happens?
[10:21] <SarcasticGoats> however I'm trying to install the AMD Drivers and it never seems to work, it just goes to input not supported - HOWEVER I can hear the logon sound
[10:21] <SarcasticGoats> Floogy, I go to grub, go onto Ubuntu. Purple grub screen for a few seconds and then 'Input Not Supported'
[10:22] <hurdvm> !nomodeset | SarcasticGoats
[10:22] <floogy> SarcasticGoats, Please try ALT+CTRL+F2 like ezra-s suggested
[10:22] <ezra-s> SarcasticGoats, hearing the logon sound but not seeing anything, sounds like monitor can't display resolution
[10:22] <SarcasticGoats> I was thinking that too ezra
[10:23] <floogy> Ok, I guess that won't switch you into a console logon that the screen will display.
[10:23] <SarcasticGoats> There's a line in GRUB which is like GFXMODE 640X480 and a guide told me to remove the #
[10:23] <ezra-s> SarcasticGoats, your best bet is checking the log under console
[10:23] <ezra-s> SarcasticGoats, but thats for console, it has nothing to do with Xorg drivers and you want to go into desktop
[10:23] <SarcasticGoats> Should I try the nomodeset thing then?
[10:24] <ezra-s> unless there is some framebuffer driver that is conflicting with the xorg driver
[10:24] <floogy> SarcasticGoats, try the kernel boot parameter nomodeset on the edited grub kernel line like hurdvm suggested
[10:24] <hurdvm> SarcasticGoats: it is worth a go
[10:24] <SarcasticGoats> OK
[10:24] <SarcasticGoats> Hang on
[10:24] <SarcasticGoats> I'm just going to log onto the irc on my laptop
[10:27] <SarcasticGoats> Going to try to boot into nomodeset
[10:28] <SarcasticGoats> No, Input Not Supported still
[10:28] <SarcasticGoats> does the nomodeset go with a space?
[10:28] <SarcasticGoats> the linux /boot line ended in ff so i typed ff nomodeset. Do I leave out the space?
[10:29] <wildc4rd> what are the nvidia drivers like in ubuntu 64 bit now?
[10:30] <squaregoldfish> wildc4rd: They work well for me. Can't say  more than that!
[10:30] <SarcasticGoats> Left out the space, see if that works
[10:30] <wildc4rd> cool, need to allocate more ram to java as modded minecraft eats it...
[10:31] <SarcasticGoats> Nope, it still says 'Input Not supported'.
[10:31] <SarcasticGoats> Does anyone know what's gone wrong?
[10:33] <SarcasticGoats> ezra-s do you have any idea what I could do?
[10:34] <floogy> SarcasticGoats, can you try to omit the splash quiet in the boot line and try again?
[10:34] <SarcasticGoats> ok
[10:35] <SarcasticGoats> Is that in the GRUB edit thing again?
[10:35] <SarcasticGoats> Found it I'll see if this works
[10:35] <floogy> perhaps also some parts whose defining the resolution.
[10:36] <SarcasticGoats> floogy
[10:36] <SarcasticGoats> It doesnt work
[10:36] <SarcasticGoats> Floogy I'm not sure what to edit exactly
[10:37] <ezra-s> you can see what's behind the scenes in the splash screen once it is booting by hitting Esc I recall
[10:38] <SarcasticGoats> Ezra, when do I press Esc?
[10:38] <beav> please how to join the cameroon team for freenode
[10:39] <floogy> SarcasticGoats, http://askubuntu.com/questions/162075/my-computer-boots-to-a-black-screen-what-options-do-i-have-to-fix-it
[10:39] <hurdvm> beav: /join #freenode and ask there
[10:39] <SarcasticGoats> Oh hang on ezra
[10:39] <ezra-s> SarcasticGoats, when you see the ubuntu screen when system is booting
[10:39] <floogy> https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen bottom
[10:39] <SarcasticGoats> I pressed the Esc screen after selecting ubuntu on grub
[10:40] <floogy> SarcasticGoats, also try to press CTRL+ALT+F1 and CTRL+ALT+F7 and vice versa
[10:42] <SarcasticGoats> floogy the askubuntu thing didnt work
[10:42] <SarcasticGoats> When do I press CTRL+ALT+F1?
[10:42] <SarcasticGoats> after selecting ubuntu ?
[10:43] <Kartagis> why does "sudo vgcreate myvg0 /dev/sdk1" give me "Unable to add physical volume '/dev/sdk1' to volume group 'myvg0'."? is it because it's actually a USB device?
[10:43] <floogy> What did pressing ESC and the console switch while booting? Yes after selecting and pressing ENTER and waiting for a while...
[10:44] <floogy> Or is ther still the odd 'no signal' on screen message of the screen? You should omit quiet splash and fill in nomodeset.
[10:44] <SarcasticGoats> the ESC key
[10:45] <SarcasticGoats> That brought up some lines of code with some sort of AMD error but I couldn't read it as it was too fast
[10:45] <SarcasticGoats> I couldn't get the console up
[10:45] <SarcasticGoats> I'll see if I can read the esc things
[10:46] <floogy> Can you switch back to the white message lines on the black screen?
[10:46] <floogy> You might try to press break
[10:46] <floogy> or Shift+arrow up
[10:47] <SarcasticGoats> it's a few lines and then goes to not supported error
[10:47] <floogy> pressing break again will continue booting
[10:47] <floogy> Can you paste the whole error?
[10:48] <SarcasticGoats> i'll see
[10:48] <SarcasticGoats> [ 10.506297[ sp5100_tco: mmio address 0xfec000f0 already in use
[10:48] <floogy> You may can try to solve the issue later by booting into the live system of the desktop dvd
[10:49] <SarcasticGoats> microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
[10:49] <floogy> Does that hang there?
[10:49] <SarcasticGoats> no
[10:49] <SarcasticGoats> that line appears 6 times
[10:49] <SarcasticGoats> it comes on screen for a second or two
[10:49] <floogy> ok, so it might bring up the console logon.
[10:49] <SarcasticGoats> and then goes to input not supported
[10:50] <SarcasticGoats> Hmm searching that error that seems to be the CPU?
[10:50] <SarcasticGoats> It's an AMD FX-6100
[10:51] <floogy> Ah, I see. So you have to put in a boot parameter to omit the amd ati graphics drivers
[10:51] <SarcasticGoats> ... :
[10:51] <SarcasticGoats> :S
[10:53] <floogy> try to add text near nomodeset
[10:53] <starbuck> hi, is there a calendat app which integrates into unity and reminds me of tasks, birthdays etc?
[10:53] <starbuck> calendar
[10:53] <SarcasticGoats> floogy any specific text?
[10:53] <hurdvm> starbuck: click on the date
[10:54] <floogy> literally text
[10:54] <shmoolki> y'a t'il des francais ici?
[10:55] <floogy> to get the text console
[10:55] <starbuck> hurdvm: this doesn't help, i cant add task and get reminded etc...
[10:55] <DJones> !fr | shmoolki
[10:55] <SarcasticGoats> oh xD
[10:55] <SarcasticGoats> after or before or does it mater
[10:56] <SarcasticGoats> And do I keep the quiet splash part?
[10:57] <floogy> SarcasticGoats, No, it doesn't matter https://wiki.ubuntu.com/X/NonGraphicalBoot https://help.ubuntu.com/community/BootOptions?action=show&redirect=BootParameters https://www.kernel.org/doc/Documentation/kernel-parameters.txt
[10:58] <SarcasticGoats> ok it's "quiet splash text nomodeset"
[10:58] <floogy> yes, if that doesn't work try gfxpayload=text because I'm not sure
[10:59] <SarcasticGoats> the first one is stuck at the purple GRUB screen
[10:59] <migadoo> Little Bobby came home crying. Mommy asked him what's wrong. Mommy President Obama visited our classroom saying evolution says we came from monkeys. Preacher visited saying we came from god. Who's right. Momma said they both are right. Obama is from a monkey. People are from god
[10:59] <shmoolki> how can i install wamp server in ubuntu
[10:59] <floogy> Try ESC and ALT+CTRL+Fn again
[10:59] <shmoolki> how can i install wamp server in ubuntu?
[10:59] <migadoo> Little Bobby came home crying. Mommy asked him what's wrong. Mommy President Obama visited our classroom saying evolution says we came from monkeys. Preacher visited saying we came from god. Who's right. Momma said they both are right. Obama is from a monkey. People are from god
[11:00] <hurdvm> shmoolki: you don't
[11:00] <floogy> where n in Fn is a number between 1..7
[11:00] <hurdvm> !lamp | shmoolki
[11:00] <SarcasticGoats> Is that referring to me ?
[11:00] <shmoolki> how can i make this
[11:00] <shmoolki> aptget lamp
[11:00] <SarcasticGoats> i'll try the gfxpayload=text
[11:00] <cfhowlett> !who
[11:01] <floogy> SarcasticGoats, ESC and ALT+CTRL+Fn again, is referring to you, yes.
[11:01] <SarcasticGoats> floogy where does it go ?
[11:01] <SarcasticGoats> the gfxpayload
[11:01]  * cfhowlett ... ah jeez not THIS idiot again
[11:01] <shmoolki> ubottu: i need write your name everytime
[11:01] <jony_easyrider> I need a free font which has symbols
[11:01] <floogy> where the 'text' was placed
[11:02] <cfhowlett> !ops| migado sending racist comments via pm.  please smite
[11:03] <SarcasticGoats> Floogy that goes to input not supported
[11:03] <migadoo> Little Bobby came home crying. Mommy asked him what's wrong. Mommy President Obama visited our classroom saying evolution says we came from monkeys. Preacher visited saying we came from god. Who's right. Momma said they both are right. Obama is from a monkey. People are from god
[11:04] <cfhowlett> !ops|migadoo
[11:04] <cfhowlett> Tm_T, thanks.  sheesh.
[11:04] <Deepfriedice> Thank goodness.
[11:04] <Tm_T> please don't comment on spam
[11:05] <SarcasticGoats> Floogy I couldnt do the ctrl+alt+Fn thing
[11:05] <floogy> Ok, then try xforcevesa too (together with the other options maybe. Be sure to omit quiet splash)
[11:05] <SarcasticGoats> Floogy what do you think the problem was?
[11:06] <SarcasticGoats> is*
[11:06] <floogy> SarcasticGoats, http://askubuntu.com/questions/133844/fglrx-causes-serious-bug-black-screen
[11:06] <Kartagis> why does "sudo vgcreate myvg0 /dev/sdk1" give me "Unable to add physical volume '/dev/sdk1' to volume group 'myvg0'."? is it because it's actually a USB device?
[11:07] <floogy> SarcasticGoats, Does it boot up with xforcevesa?
[11:07] <SarcasticGoats> No ;|
[11:07] <SarcasticGoats> Floogy, I can't get to the terminal so that answer thread isn't very useful :|
[11:08] <shmoolki> reveillez vous
[11:08] <floogy> Then you can try to solve the error by analyzing /var/log/Xorg.0.log and the last link I posted for you. I'm away now.
[11:08] <epoptes_user9> Hi all. How can I get that all users have full control of a folder, also for new folder/documents instead of doing chmod 777 -R root_path everytime?
[11:08] <floogy> SarcasticGoats, Hm, xforcevesa didn't help to avoid the on screen message 'no input'?
[11:09] <SarcasticGoats> no
[11:09] <SarcasticGoats> Should I just do a reinstall of Ubuntu ?
[11:09] <floogy> Then I don't have any clues what could help you.
[11:09] <jony_easyrider> Tm_T, migadoo is talking to me dirty, please help
[11:09] <SarcasticGoats> Thanks anyway.
[11:10] <floogy> SarcasticGoats, Maybe you'll find a hint in some of the links I posted. Good luck.
[11:10] <SarcasticGoats> OK
[11:10] <Myrtti> jony_easyrider: there is nothing more the channel ops can do about it.
[11:10] <hurdvm> SarcasticGoats: what was wrong with the default radeon driver that made you want to use the proprietry one?
[11:11] <floogy> You may also try to fix it from the live system with the infos of the last link I offered.
[11:11] <SarcasticGoats> hurdvm, the screen resolution wasn't right
[11:12] <floogy> jony_easyrider, he opened a query to mee too.
[11:12] <SarcasticGoats> Floogy I'll go into live and try that then
[11:12] <hurdvm> SarcasticGoats: what resolution did you get?
[11:12] <SarcasticGoats> Can't remember, I'll check now
[11:13] <SarcasticGoats> Lol migadoo
[11:13] <floogy> Ok, afk
[11:13] <SarcasticGoats> hurdvm, 1024*768
[11:13] <hurdvm> SarcasticGoats: ouch
[11:15] <rockworldmi> what is the irc channel for pear os?
[11:15] <hurdvm> !alis | rockworldmi
[11:16] <hurdvm> rockworldmi: you could also check their website
[11:16] <rockworldmi> hurdvm: ok..
[11:17] <SarcasticGoats> I think I'll have to reinstall Ubuntu
[11:17] <Sebo> Hi, I am going to mount new HDD which is going to be used as a non-critically-sensitive data space at my Ubuntu server... is there any 'ubuntu' or 'linux' convention for choosing the mountpoint for such disks?
[11:19] <Sebo> ... I know I can mount it almost anywhere... but where would you put it?
[11:19] <hurdvm> Sebo: /media or /mnt are the most sensible places
[11:19] <SarcasticGoats> Does anyone else have any solutions? My acer monitor is showing Input Not Supported after installing AMD Drivers for my HD 5450.
[11:20] <hurdvm> SarcasticGoats: perhaps a silly suggestion: have you tried a different monitor?
[11:20] <SarcasticGoats> I'll try that
[11:20] <SarcasticGoats> ... :P
[11:21] <mdfe> SarcasticGoats: have you tried the standard things: (a) nomodeset and (b) manually setting resolution in xorg.conf?
[11:21] <Sebo> hurdvm: ... /media is being used as a base for automatically mounted USB devs, isn't it?
[11:21] <hurdvm> Sebo: yes
[11:21] <jony_easyrider> which is the symbols font for Ubuntu?
[11:23] <Sebo> hurdvm: So i think I'll chose /mnt to senure any possible colision when someone would like to put USB wit the same label :P ...thx
[11:23] <mabinu> ping admin
[11:23] <mar77i> hello ubuntu, I have a question. what is a xorg and where can I get one?
[11:23] <shmoolki> ii have problem with phpmyadmin , it need password and when i type it , it says no allow?
[11:23] <histo> !xorg | mar77i
[11:24] <ezra-s> I have a disk encrypted with LUKS, I want to copy a private key which can decipher my disk should I lose my passphrase, is there a document for an easy step by step somewhere?
[11:25] <mar77i> jk, having a maxdata laptop with a g72m 16:10 display. priority setting to achieve is mirrored view with 1024x768 resolution. however a mode with that resolution which I need is not available in both system settings and nvidia-settings.
[11:26] <SarcasticGoats> hurdvm, the second monitor didnt work either
[11:26] <mar77i> I thought about writing the modeline myself, but I'm not sure how the driver will react
[11:27] <hurdvm> SarcasticGoats: mdfe had a good suggestion: manually specifying a resolution in xorg.conf
[11:28] <SarcasticGoats> How do i get to the xorg.conf file if I can't get into the desktop?
[11:28] <hurdvm> SarcasticGoats: you can use a livecd
[11:28] <SarcasticGoats> ok
[11:28] <mdfe> SarcasticGoats: You hold shift as it boots up, and select recovery, then boot to shell
[11:28] <mdfe> SarcasticGoats: When does the monitor black out? Do you see the start of boot?
[11:29] <SarcasticGoats> The monitor shows grub
[11:29] <SarcasticGoats> I select ubuntu
[11:29] <SarcasticGoats> a few seconds of grub purple screen then input not supported
[11:29] <mdfe> SarcasticGoats: Then the problem is almost certainly "nomodeset"
[11:29] <SarcasticGoats> I've already put in nomodeset
[11:29] <SarcasticGoats> Which do you recommend I do? The root shell method or live cd?
[11:30] <mdfe> OK, you're goign to have to fiddle with xorg then ... do it whichever way you are most comfortable with
[11:30] <mdfe> But i would double check you have nomodeset as it's very common and has exactly the symptoms you describe
[11:30] <SarcasticGoats> I'll use live cd
[11:31] <histo> SarcasticGoats: how did you enable the nomodeset kernel parameter
[11:31] <SarcasticGoats> histo, I used live cd to edit the grub.conf file
[11:32] <histo> SarcasticGoats: did you sudo update-grub after editing?
[11:32] <SarcasticGoats> that didnt work
[11:32] <SarcasticGoats> I used something else I think
[11:32] <histo> SarcasticGoats: well then you aren't using nomodeset
[11:32] <SarcasticGoats> If I go to GRUB, press e, the 'nomodeset' thing is there
[11:32] <histo> SarcasticGoats: press e on the grub screen to edit the selected kernel line and just append it manually
[11:32] <hurdvm> SarcasticGoats: you don't need a livecd to do nomodeset
[11:32] <mdfe> uhh yea you have to edit /etc/default/grub and then run `sudo update-grub`
[11:33] <SarcasticGoats> mdfe, sudo update-grub came with an error
[11:33] <hurdvm> mdfe: not to test it out, just do what histo just said then when you're booted you can edit the file
[11:33] <SarcasticGoats> and there is no xorg.conf file
[11:33] <SarcasticGoats> it;s just plain
[11:34] <hurdvm> SarcasticGoats: xorg.conf is used by default, but if you make one it will be obeyed
[11:34] <histo> SarcasticGoats: You don't typically need an xorg.conf
[11:34] <hurdvm> !xorgconf | SarcasticGoats
[11:34] <hurdvm> SarcasticGoats: sorry, i meant to say isn't used by default
[11:35] <SarcasticGoats> OK I'll try that
[11:36] <SarcasticGoats> "Fatal server error: Could not create lock file in /tmp.tX0-lock"
[11:37] <eccstartup> hi, I upgraded from 12.10 to 13.04,  and there is "AMD unsupported hardware" on the right bottom. what can I do to remove it
[11:41] <histo> SarcasticGoats: When did you get that error?
[11:41] <SarcasticGoats> on the recovery root shell
[11:41] <histo> eccstartup: I believe that is a watermark from the drivers
[11:41] <histo> SarcasticGoats: when you typed what command?
[11:41] <floogy> that works? You can login without live cd?
[11:42] <darkmutt> hi ubuntu channel
[11:42]  * histo it's like pulling teeth sometimes
[11:42] <darkmutt> a seemingly simple question how would i plug my php site to the lamp server installed anyone know of a good tutorial or something alike?
[11:42] <SarcasticGoats> I can get to the grub menu and choose recovery
[11:42] <SarcasticGoats> and hi again floogy :)
[11:42] <histo> darkmutt: copy it to /var/www
[11:43] <floogy> And in recovery mode you're able to login or getting into a shell?
[11:43] <histo> darkmutt: or use a2ensite  commands
[11:43] <floogy> like  ~#
[11:43] <SarcasticGoats> I can get to the shell
[11:43] <SarcasticGoats> Yes
[11:43] <floogy> And it's not booted from the dvd?
[11:43] <histo> floogy: recover mode is single user mode. A root prompt
[11:43] <eccstartup> yeah it is a watermark, but looks ugly
[11:43] <floogy> histo, yes
[11:44] <histo> eccstartup: askubuntu.com
[11:44] <SarcasticGoats> Floogy, it's booted from the GRUB menu
[11:44] <histo> SarcasticGoats: what command did you run when you received that error?
[11:45] <SarcasticGoats> Xorg -configure
[11:45] <mar77i> hmm, how to boot into cli when you can't seem to get into grub menu?
[11:45] <SarcasticGoats> and Xorg :1 -configure
[11:45] <floogy> SarcasticGoats, ok, so you're fine to try the solutions of my last link, or just remove the ati proprietary driver
[11:46] <floogy> I'm away again. afk
[11:46] <SarcasticGoats> How do I do this?
[11:47] <SarcasticGoats> All I had to do is to edit /etc/modprobe.d/blacklist-local.conf file and comment out line with blacklist fglrx by inserting # in front of the line. So it looks like this now:  # blacklist fglrx
[11:47] <SarcasticGoats> No that doesn't work, I can't install fglrx fglrx-amdcccle or updates
[11:48] <histo> !ati | SarcasticGoats
[11:50] <SarcasticGoats> In the root shell, sudo apt-get remove --purge fglrx fglrx-amdcccle
[11:50] <SarcasticGoats> Comes up wit "W: Not using locking for read only lock file /var/lib/dpkg/lock
[11:51] <SarcasticGoats> and E: Unable to write to /var/cache/apt
[11:51] <AnonAMouse> How do I open 'additional drivers' application via terminal?
[11:52] <stef1a> anyone know why a combination of Ubuntu 13.04 and Chromium might result in a slow Internet-browsing experience?..
[11:53] <SarcasticGoats> Histo: Do I need to update grub then?
[11:54] <AnonAMouse> I installed some packages and after reboot unity and the window borders no longer appear.
[11:56] <cfhowlett> AnonAMouse, packages?  as in ppa's?
[11:56] <AnonAMouse> I installed Catalyst control center (have a temporary nVidia card), steam and hibernate. I've un-installed them all now.
[11:56] <BluesKaj> HI all
[11:57] <histo> SarcasticGoats: you don't need to use sudo in the root shell
[11:57] <BluesKaj> AnonAMouse, catalyst is for ATI graphics
[11:57] <SarcasticGoats> oh yeah
[11:58] <AnonAMouse> I have an AMD CPU and will have a radeon soon. Stupidly wanted to see what it looked like.
[11:59] <SarcasticGoats> histo: Still doesnt work
[11:59] <SarcasticGoats> I tried the NOMODESET thing too
[11:59] <usa_rulz_demokra> sup
[12:00] <histo> SarcasticGoats: are you at a #  promtp?
[12:00] <usa_rulz_demokra> neone on the ubuntu dev team here
[12:00] <BluesKaj> AnonAMouse, an amd cpu doesn't require you to install ati graphics apps like catalyst , but if you decide to use the nvidia then the driver you choose will installa settings gui as well
[12:00] <usa_rulz_demokra> or all volunteers?
[12:00] <histo> SarcasticGoats: or a $
[12:00] <SarcasticGoats> #
[12:00] <histo> SarcasticGoats: apt-get purge somepackage
[12:00] <usa_rulz_demokra> #opensource?
[12:00] <usa_rulz_demokra> lmao
[12:00] <histo> usa_rulz_demokra: /j #ubuntu-dev
[12:00] <usa_rulz_demokra> ty
[12:01] <usa_rulz_demokra> ohooh
[12:01] <SarcasticGoats> Nope
[12:01] <usa_rulz_demokra> guess they are anonymous as fuck
[12:01] <AnonAMouse> BluesKaj How can I open the nvidia settings via terminal?
[12:01] <usa_rulz_demokra> i should trust the
[12:01] <usa_rulz_demokra> m
[12:01] <usa_rulz_demokra> cause its open source ""
[12:01] <histo> !language | usa_rulz_demokra
[12:01] <FloodBot1> usa_rulz_demokra: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[12:01] <usa_rulz_demokra> sorry
[12:01] <usa_rulz_demokra> i just wnat to help
[12:01] <usa_rulz_demokra> people
[12:01] <histo> usa_rulz_demokra: then stop using the enter key.
[12:02] <usa_rulz_demokra> Roger that, sir.  Command understood and taken into consideration but I'm forced to break your orders right now to respond to you.
[12:02] <usa_rulz_demokra> I hope that is okay.
[12:02] <SarcasticGoats> Right going afk
[12:02] <BluesKaj> AnonAMouse, what are you attempting ?
[12:02] <usa_rulz_demokra> Im enjoying a nice opensource cup of ubuntu.
[12:02] <usa_rulz_demokra> I trust it more than windows.
[12:02] <Ben64> !ot | usa_rulz_demokra
[12:02] <usa_rulz_demokra> Because its not made by a corporation called MS
[12:03] <usa_rulz_demokra> Im giving support
[12:03] <Ben64> stop whatever it is you're doing, its not giving support
[12:03] <usa_rulz_demokra> would you like to explain how i'm not?
[12:03] <usa_rulz_demokra> i'm making people aware of the software/hardware monopoly
[12:03] <usa_rulz_demokra> that opensource obfuscates
[12:03] <Ben64> not relevant
[12:03] <usa_rulz_demokra> How so?
[12:03] <cfhowlett> usa_rulz_demokra, opinion doesn't equal support.  Please moderate your posts or take the discussion to #ubuntu-offtopic
[12:03] <usa_rulz_demokra> I just think people have been purposely misled
[12:03] <usa_rulz_demokra> so i thin k it does
[12:03] <usa_rulz_demokra> equal support bro
[12:03] <histo> usa_rulz_demokra: You are offtopic
[12:03] <Ben64> thats nice, take it to offtopic
[12:03] <cfhowlett> !offtopic|usa_rulz_demokra, again
[12:04] <usa_rulz_demokra> you're defining things for me
[12:04] <DJones> usa_rulz_demokra: This channel is deal with support issues, there are other channels for general chat and discussion
[12:04] <usa_rulz_demokra> i dont like that
[12:04] <usa_rulz_demokra> i thought this was opensource
[12:04] <usa_rulz_demokra> freedom
[12:04] <FloodBot1> usa_rulz_demokra: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[12:04] <usa_rulz_demokra> and shit
[12:04]  * cfhowlett looks outside for full moon ...
[12:05]  * histo senses a ban in the future
[12:05]  * PenguinSavior senses some burning bodies in the  future
[12:05] <AnonAMouse> BluesKaj I wanted to see if the driver was installed. Would catalyst perhaps have un-installed it?
[12:09] <AnonAMouse> It must have done something as the desktop was fine and dandy prior to installing catalyst and rebooting
[12:09] <Ben64> AnonAMouse:  lshw -C VIDEO
[12:10] <Ben64> look for the "driver" section
[12:12] <AnonAMouse> Ben64 There is no entry entitled driver.
[12:12] <Ben64> configuration: driver=nvidia latency=0
[12:12] <Ben64> like that
[12:13] <AnonAMouse> Ah it's configuration: driver=nouveau latency=0
[12:13] <Ben64> thats the open source nvidia driver
[12:14] <bitnumus> hi all, can someone tell me why my mounted external drive randomly has its permissions changed?
[12:14] <AnonAMouse> Should I run unity and see what it comes out with?
[12:14] <bitnumus> i have mounted the drive, all is normal, after editing a file and going to save it, it wont let me save it
[12:14] <bitnumus> i check the drive again and all the folders have a lock symbol
[12:14] <coolot> hello guys! newbie here..... i am trying to do this command : $ find /media/BANGGOL/ACDC -name 'ACDC*' -exec ls -l {\}\ \;
[12:14] <coolot> but the result is - find: missing argument to `-exec'
[12:14] <coolot> please advise thanks!
[12:15] <ShapeShifter499> hi
[12:15] <cfhowlett> ShapeShifter499, greetings
[12:15] <SarcasticGoats> Right I'm back. If the open source drivers for my HD 5450 leave me stuck in 1024*768 and the proprietary drivers don't work, what can I do?
[12:16] <ShapeShifter499> I ran into a suggestion to use "amd64-microcode" to help speed up things, however attempting to install this wants to remove packages "linux-generic" and other kernel packages, why?
[12:18] <ro9> any good game for ubuntu
[12:20] <ObrienDave> ro9, depends on what you consider as "good"
[12:20] <cfhowlett> ro9, yes.  go to the software center and look for games.  choose and enjoy.
[12:21] <floogy> SarcasticGoats, please pastebin the output of apt-cache policy fglrx fglrx-amdcccle
[12:22] <floogy> and dpkg -l *fglrx*
[12:22] <SarcasticGoats> Floogy I'm just going to reinstall ubunt
[12:23] <floogy> ok, maybe you should avoid the fglrx driver then.
[12:23] <ShapeShifter499> seems like amd64-microcode is included in the linux kernel packages from what I gathered in google searches, thats why there is a conflict
[12:23] <ShapeShifter499> I think I'm good
[12:24] <AnonAMouse> Ben64 Sorry, I had to log out because I could type anything anymore. Here's Unity's output http://pastebin.com/QWveqn8M
[12:26] <SarcasticGoats> floogy! I've found how to change the screen dimensions with the xorg open source driver! It's worked :D
[12:26] <ro9> i'll try Urban Terror then
[12:26] <SarcasticGoats> Woohoo!
[12:27] <floogy> SarcasticGoats, ok, so you're fine now. Keep away from the frglx drivers.
[12:27] <SarcasticGoats> Sure will
[12:28] <floogy> *fglrx
[12:28] <SarcasticGoats> Do you think in the future they'll add better support for Ubuntu and AMD GPU's?
[12:28] <floogy> I don't know...
[12:28] <AnonAMouse> I'm getting a 7790 in a few days. Looks like I may be back asking for help with that :(
[12:29] <darkmutt> can i run a .desktop file from a terminal and if so what's the comment?? ./file??
[12:29] <sienez> I'm having problems capturing video from my camera which is connected via PCI card. I get a green screen. I have tested the camera via usb connection, runs smooth. I have exchanged the pci card, no difference. anyone know help?
[12:29] <narcos> I want a script to run with root privs on boot, is adding it to /etc/rc.local the right way?
[12:30] <SarcasticGoats> Fantastic.
[12:30] <SarcasticGoats> Thanks for your help anyway.
[12:31] <darkmutt> hmmm thanks i just read into the file and ran the command from inside ;)
[12:31] <starbuck> hello, how can i search each file in a directory for a certain pattern? i only want to search within txt files (or .cfg, .ini, .log etc), should be searche for that pattern. is terhe a tool for that?
[12:32] <darkmutt> is there a way to run a program that opens a new window as sudo from the commandline, close the terminal but make the program stay open?
[12:32] <sienez> starbuck, grep "pattern" .*txt
[12:32] <bitnumus> can someone explain to me how my external drive's permissions could change on the fly ?
[12:32] <starbuck> sienez: thnx
[12:32] <bitnumus> how can i see what processes are using it ?
[12:34] <AnonAMouse> Ben64 It's a new installation should I just install ubuntu again and not mess with catalyst?
[12:34] <mar77i> someone familiar with gnome could certainly tell me how one makes a shell script executable without the dialog (Show/Execute/in a terminal)
[12:35] <AnonAMouse> mar77i it's something like run chmod as root and put +x
[12:35] <mar77i> as root?
[12:35] <mar77i> lol
[12:36] <AnonAMouse> sudo chmod 777 +x Something like that
[12:36] <mar77i> no I do have +x - and I certainly don't need 777...
[12:36] <mar77i> why
[12:36] <sienez> mar77i, if you dont want to use the terminal you can do it in nautilus. right click properties
[12:36] <mar77i> look
[12:37] <sienez> mar77i, otherwise its sudo chmod u+x filename
[12:37] <mar77i> it does have +x, but the dialog is too much for the end user. I'll probably move it to /usr/local/bin and switch to a desktop file
[12:38] <Snake2k> Hello everyone, I installed Gnome shell recently and installed GDM but my login screen got reset to GDM too i think, How do i use LightDM or unity greeter instead of gdm?
[12:39] <tux_> hello all
[12:39] <DJones> scrollback: Please fix your connection, or if you are testing something, please use #test rather than #ubuntu
[12:40] <tux_> am I in the channel
[12:40] <DJones> tux_: Yes
[12:41] <Parhs8> hi
[12:41] <Parhs8>  For my cakeday I'd like to share the most horrifying thing I've seen due to reddit. (NSFW) http://imgur.com/Fvt8G
[12:41] <mar77i> I don't need my script be run as root, and I know I can set it 755 without ever going root.
[12:41] <DJones> !ot | Parhs8
[12:42] <mar77i> Parhs8: congrats for creepday
[12:42] <no_gravity> Hello Everybody! I have a long delay when I do "ssh somehost" but no delay when I do "ssh ip_of_somehost". Any idea what I can do to solve this?
[12:43] <Phoenixxl> hello . Do any of you know how to send an "empty" option from a dhcp server to a particular client when the option has been set globally ? Overriding it for a specific client is simple , but "not sending it" .. thnx for any suggestions.
[12:44] <Phoenixxl> no_gravity you could for example harcode the host in your hosts file
[12:45] <floogy> no_gravity, seems to be related to a dns solver issue
[12:45] <Phoenixxl> no_gravity ^ what he said
[12:45] <no_gravity> Phoenixxl: maybe. but why is it slow? "dig somehost" comes back with the ip immediately.
[12:46] <Phoenixxl> no_gravity can your target resolve addresses ? is the delay after password ?
[12:46] <no_gravity> Phoenixxl: what do you mean with "can your target resolve addresses"? its before the password.
[12:46] <Phoenixxl> no_gravity the server
[12:47] <Phoenixxl> no_gravity can your server resolve addresses
[12:47] <no_gravity> Phoenixxl: i dont know
[12:47] <maum> hello
[12:47] <Phoenixxl> no_gravity the issue could be your server , when connecting with an url , tries to do the extra step to see if you actually mean to ssh to it
[12:48] <maum> does anyone know how to download the source from http://mirror.emulab.net/cygwin/
[12:48] <Phoenixxl> no_gravity by resolving the url that got you to it
[12:48] <kloes> if a partition starting sector is at 2048 does that eaquals to 2MiB?
[12:48] <kloes> if a partition starting sector is at 2048 does that eaquals to 2MiB?
[12:48] <kloes> if a partition starting sector is at 2048 does that eaquals to 2MiB?
[12:48] <FloodBot1> kloes: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[12:49] <Phoenixxl> kooes a standard block is 512 bytes
[12:49] <Phoenixxl> kloes newer ones are 4K
[12:50] <Phoenixxl> kloes it depends
[12:50] <Phoenixxl> kloes 2048 would be 2040x512 normally
[12:50] <no_gravity> Phoenixxl: you mean the client sends the hostname along when it connects to the server?
[12:50] <Phoenixxl> 2048
[12:50] <Phoenixxl> no_gravity i think so yes
[12:51] <andersbr> rnholio
[12:51] <RoDiMuS-X> Does anyone know how to enable create launcher in the right click menu on the desktop in Gnome-shell on ubuntu 13.04
[12:51] <psryn> hello
[12:51] <psryn> i installed the lxde desktop environment on quantal. i didnt like it, so i ran 'apt-get remove lxde' and then 'apt-get autoremove', but i can still see an lxde option on my login screen. how do i correct this?
[12:53] <Phoenixxl> no_gravity , your server also prepares a reply in motd form that can include a lot of info that is dependent on external connections , that's why i asked if it was after the password you got the delay
[12:53] <kloes> I have a new drive it uses advanced format feature so it should be 4k.Gparted reports starting sector at 2048 not 4096 parted /dev/sda u MB print shows 1.05MB ; parted /dev/sda u s print - 2048s
[12:54] <Phoenixxl> kloes new or old , a drive reporting 4K is very rare most report 512 in some kind of compatibility mode
[12:54] <Phoenixxl> kloes like for example WD 3tb's
[12:55] <kloes> so my question is if I try to allign partition using gparted will it work since there is a difference 2048s shows up as a 1.05 MB
[12:55] <kloes> it is a new drive I did not partition it yet
[12:55] <maum> does anyone know how to download the source from http://mirror.emulab.net/cygwin/
[12:56] <kloes> It came already partitioned
[12:56] <Phoenixxl> kloes : sudo hdparm -I /dev/sda | grep -i physical
[12:56] <stef1a> anyone know why dual monitors may not work with Ubuntu 13.04 using an HP ProBook 4535s?
[12:57] <stef1a> plugging in the external monitor just causes a mess of graphics to show up on the external
[12:57] <BluesKaj> maum, just click on the file
[12:57] <kloes> I get error on that command invalid argument
[12:58] <maum> BluesKaj: but there are a bunch of files.. so..
[12:58] <no_gravity> Phoenixxl: -4 fixes it. so it seems ssh tries to use ipv6 until it times out.
[12:58] <Phoenixxl> kloes is it sda in your case ?
[12:58] <drasko> Hi all, trying to install udhcpc package fails with : unable to open files list file for package `iproute': Input/output error
[12:58] <kloes> it is
[12:58] <drasko> where to look
[12:58] <drasko> ?
[12:58] <Phoenixxl> no_gravity good luck
[12:58] <maum> git? svn?
[12:59] <maum> I am not sure
[12:59] <maum> ...
[12:59] <kloes> tell me how would you allign partition
[12:59] <kloes> this is what I want to find out before trying to repartition it
[12:59] <Phoenixxl> kloes i waould always reformat a hd i got
[12:59] <kloes> then how do you allign the partition
[12:59] <Phoenixxl> kloes just DD a bunch of zeroes to the first 10 MB
[13:00] <SKiTZO> I create a loop with losetup and later i try to detach it with losetup -d. At that point detach fails. when i do fuser on the file it reports a lot of PIDS are using the file which clearly is not true (the file is a private file I created), that is of no interrest to the many PIDs
[13:00] <kloes> then?
[13:00] <SKiTZO> is this a known problem?
[13:00] <Phoenixxl> kloes leave a nice gap in front
[13:00] <SKiTZO> how can i make the PIDS forget my private file so that I can detach it?
[13:00] <BluesKaj> maum, the exe file , it's for windows tho
[13:01] <Phoenixxl> kloezs then pick a rounded number for your partition size in case you need to dd for recovery later
[13:01] <kloes> if this how you would align your 4k 512e whatever AF drive?
[13:01] <Phoenixxl> kloes ie , leave some space at the end
[13:02] <Phoenixxl> kloes yes , leave 4096x512 bytes in front , and leave plenty at the back
[13:02] <drasko> Hi all, trying to install udhcpc package fails with : unable to open files list file for package `iproute': Input/output error
[13:02] <drasko> where to look
[13:02] <Phoenixxl> that's barely 2 meg
[13:03] <kloes> why 2048s is not eaqual to 2MiB in gparted?
[13:03] <Phoenixxl> kloes because blocks are half a KB not a whole KB
[13:04] <cfhowlett> kloes, different measurement standards.  deal with it.
[13:04] <sienez> I'm having problems capturing video from my camera which is connected via PCI card. I get a green screen. anyone know help?
[13:04] <Phoenixxl> kloes it's been like that since birds walked on foot
[13:04] <psryn> i installed the lxde desktop environment on ubuntu 12.10. i didnt like it, so i ran 'sudo apt-get remove lxde' and then 'sudo apt-get autoremove', but i can still see an lxde option on my login screen. how do i correct this?
[13:04] <cfhowlett> psryn, try sudo apt-get purge lxde
[13:05] <fishcooker> hello ubuntuers
[13:05] <kloes> birds never walked on foot but this is another matter
[13:05] <cfhowlett> fishcooker, greetings.
[13:05] <Phoenixxl>  ...
[13:05] <psryn> cfhowlett, "Package 'lxde' is not installed, so not removed"
[13:05] <hs_> hello , my xorg/gnome has been crushed, tried everything, even when i use live-cd its cant read the partion of the ubuntu only the windows7 loader, after i goto the windows loader i can see my old ubuntu, can any one helps me to recover/fix my old ubuntu ?
[13:05] <cfhowlett> psryn, have you rebooted since removal?
[13:05] <fishcooker> is it posible to recover partition if the partition don't mount
[13:05] <Phoenixxl> yes they did
[13:05] <psryn> cfhowlett, yes
[13:06] <fishcooker> cfhowlett: LoL
[13:06] <kloes> if you believe in darwin shit ,ok
[13:06] <fishcooker> the partition failed to mount
[13:06] <cfhowlett> psryn, ask in main channel.  This stuff happens but I don't remember the fix.
[13:07] <Phoenixxl> it's the other shit you need to "believe" in lol
[13:07] <psryn> cfhowlett, what channel is that?
[13:07] <cfhowlett> psryn, #ubuntu
[13:07] <psryn> what channel is this?
[13:07] <cfhowlett> psryn, errr, right... sorry.  dual channels, single track brain ... errror..
[13:07] <Phoenixxl> hello . Do any of you know how to send an "empty" option from a dhcp server to a particular client when the option has been set globally ? Overriding it for a specific client is simple , but "not sending it" .. thnx for any suggestions....Anyone ?
[13:08] <cfhowlett> psryn, and you're in #ubuntu
[13:08] <Phoenixxl> isc-dhcp-server in particular
[13:08] <psryn> cfhowlett, umm.. so.. can you help me out please
[13:09] <cfhowlett> psryn, sorry.  as I said, this error happens a lot, but I don't remember the fix.  ask again in this channel.
[13:10] <kloes> has anyone know how to allign partitions for af drives?
[13:10] <chvx> what is pro and cons with bleeding edge?
[13:10] <Phoenixxl> kloes what do you mean ?
[13:10] <Phoenixxl> kloes , didn't i just answer your question ?
[13:11] <narcos> Am I doing something silly with my attempt at an upstart script? - http://pastebin.com/7KEJkFra
[13:11] <kloes> no you did not
[13:11] <mar77i> chvx: the pyramids work, but some people want to go beyond steam engines and use a car
[13:11] <Phoenixxl> kloes check your block size
[13:11] <cfhowlett> chvx, better asked in #ubuntu-offtopic as this channel is for actually solving issues.   Thanks.
[13:11] <Phoenixxl> kloes if it's 512 , which it probably will be
[13:11] <kloes> I mean that if you partition af drive - all new drives are af the partition needs to be alligned or you will get performance issues
[13:12] <Phoenixxl> kloes when your partitioner asks a starting block select 4096
[13:12] <chvx> cfhowlett: what you mean?
[13:12] <Phoenixxl> kloes if yourr block size is 4096 , selkect 512 as starting block
[13:12] <andre7> hello all
[13:13] <Phoenixxl> kloes thats all there's to it
[13:13] <Phoenixxl> klos as long as you don't start in the middle of a block you're fine
[13:14] <Phoenixxl> kloes let's say you have 4 k physicsl blocks , and your drive , for compatibility reasons , like most of the time , gives the OS the illusion you have 512 byte blocks , you could potentially start your partition in the middle of one of those 4K blocks , that would be bad
[13:15] <kloes> I do not think it is possible to get the real block size because the hard drive reports what it emulates for compatability reasons.Only AF mark on its label tell that it is a new 4k drive
[13:15] <Phoenixxl> hence , if you leave a 4Kx512 byte gap up front you're covered for all possibilities
[13:15] <Phoenixxl> not true
[13:15] <cfhowlett> chvx, you asked opinions on bleeding edge vs non-bleeding edge issues.  good question ... but this channel is where work is done to get systems up, working and fixed.  I requested you take your question to offtopic because that's a great place for such debate.
[13:15] <Phoenixxl> what's your drive's name ?
[13:16] <kloes> toshiba
[13:16] <Phoenixxl> /dev/XXXXX
[13:17] <andre7> anyone knows how to disable the "lens" (?) for applications which i could download?
[13:17] <Phoenixxl> it's in /dev/XXX is it sda sdb ... whats it called
[13:17] <andre7> http://www.bilder-upload.eu/show.php?file=ebe5f0-1369660602.png
[13:18] <andre7> i dont wanna internetconnections for that
[13:19] <Phoenixxl> kloes ... no ?
[13:21] <FX6300> So I have an old nVidia card and everything worked fine with the open source driver but I've switch to a blob and I don't get unity or the window borders
[13:21] <FX6300> How do I access 'additional drivers' via terminal so I can switch back?
[13:21] <floogy> kloes, whats the output of dmesg|grep -i toshiba. Maybe that gives some informations
[13:22] <kloes> not much of a info
[13:23] <floogy> means nothing at all?
[13:23] <Phoenixxl> floogy he just needs to hdparm it and grep the output
[13:23] <floogy> sure
[13:23] <Phoenixxl> floggy , kloes it will be under the header physical
[13:23] <kloes> it tells nothing about sectors of the drive
[13:23] <kloes> how do I go into export mode in fdisk
[13:23] <narcos> Phew, I'm pretty sure I'm following this tutorial word for word, but can't get upstart to see my new job in /etc/init?..
[13:23] <kloes> *expert
[13:24] <Phoenixxl> kloes fdisk is a bit passé
[13:24] <kloes> I am reading this http://www.osnews.com/story/22872/Linux_Not_Fully_Prepared_for_4096-Byte_Sector_Hard_Drives but it does not tell exactly how to enter expert mode in fdisk
[13:24] <Phoenixxl> kloes gparted and parted are more of this decade
[13:25] <g_byers> you know, I hate uefi .-.
[13:25] <Phoenixxl> koes you are reading an article from 2010
[13:25] <FX6300> Can someone please notify me of the process name of 'additional drivers' I need to revert the driver but cant open it via GUI
[13:26] <kloes> so?
[13:26] <kloes> it is not so old
[13:26] <Ricanelite757_> does anyone know how to connect the belkin n600 DB USB Adapter to Ubuntu Linux the latest version
[13:26] <Phoenixxl> kloes the current kernel is aware of 4K drives
[13:26] <Phoenixxl> drives report physical and logical sizes when polling
[13:26] <Phoenixxl> just do it
[13:27] <Phoenixxl> instead of reading about it
[13:27] <Phoenixxl> if you are intent on reading , read the MAN for hdparam
[13:28] <antoniodp> ciao
[13:28] <kloes> this is what I get from hdparm geometry	= 65535/255/63, sectors = 1953525168, start = 0
[13:29] <antoniodp> ciao
[13:29] <antoniodp> list1
[13:29] <antoniodp> list!
[13:30] <antoniodp> list!
[13:32] <kloes> ok is there a way to check if my partition is alligned?
[13:32] <Phoenixxl> parted
[13:32] <Phoenixxl> then p
[13:33] <Phoenixxl> check start
[13:34] <floogy> yes, sudo parted /dev/sda align-check opt <partition_number>
[13:34] <floogy> replace sda with your drive device file
[13:34] <bluetiger9_> Hi. I installed Lubuntu 13.04 successfully, but on boot I am getting some disturbing screens (seem like some graphics test). video: http://www.youtube.com/watch?v=3u3_c2biz4c. (System info: AMD Athlon 2500+, Ati Radeon 9200 SE) Anybody knows what is this?
[13:35] <floogy> where partition_number is a number that stands for the partition eg. 1 or 2
[13:36] <floogy> or omit the number and it will ask you interactively
[13:36] <Bower^> can anyone think of a task that will pop the GUI for authentication? e.g. installing OS updates
[13:36] <Bower^> just gotta test something
[13:37] <floogy> Bower^, Do you mean somethink like gksudo?
[13:37] <floogy> *something
[13:37] <BlueShark> Hi, when I try to run Emit, it gives me the error message "/usr/local/bin/emit: line 14: exec: erl: not found". (Instructions: http://pastebin.com/fQ0iifVC) Does anyone know why's this happening?
[13:37] <betrayd> histo or 'Gentlemen I give you exhibit A'
[13:38] <Bower^> floogy, that brings up a different GUI
[13:38] <floogy> Bower^, Î don't get it, sorry.
[13:39] <Phoenixxl> bower : you mean something like XDM over ssh ?
[13:40] <Bower^> nope. just the GUI that pops up when you try root operations as a normal use. it asks for the sudo password
[13:40] <Bower^> normal user*
[13:41] <Bower^> basically have a load of users on my system and i want to see which user it defaults to from the drop-down list. i imagine it's done in alphabetical order
[13:41] <betrayd> Bower^ just run synaptic and the popup will show
[13:43] <betrayd> BlueShark have you met the depdencies in the first few lines
[13:43] <Bower^> thanks
[13:44] <BlueShark> betrayd: I think I did. I installed them with "sudo apt-get install miniupnpc libminiupnpc-dev".
[13:44] <betrayd> BlueShark syhnaptic should show erlang installed...
[13:45] <hs_> hello , my xorg/gnome has been crushed, tried everything, even when i use live-cd its cant read the partion of the ubuntu only the windows7 loader, after i goto the windows loader i can see my old ubuntu, can any one helps me to recover/fix my old ubuntu ?
[13:46] <cjbirk> hi
[13:46] <BlueShark> betrayd: oh. I didn't have erlang installed. That was the issue, I guess.
[13:46] <BlueShark> Thanks for the idea :)
[13:46] <betrayd> BlueShark i've made these mistakes myself. It might lead you to the next problem =) at least
[13:47] <drasko> hi all, I use dhclient to obtain my IP address, but it does not enter default gateway in the route
[13:47] <Bower^> i've just done adduser username group..in which file does it actually save that info?
[13:47] <drasko> any ideas ?
[13:48] <wildwind> Bower^: /etc/group
[13:48] <Bower^> wildwind, legend. thank you
[13:48] <narcos> drasko: You can manually add the default gateway with  'route add default gw 1.2.4'
[13:48] <narcos> drasko: Or, fix your dhcp server to hand it out
[13:49] <drasko> narcos, dhcp server hands it
[13:49] <cjbirk> Anyone in here use mullvad for their vpn and are having issues with it on 13.04?
[13:49] <drasko> other machines add routes fine
[13:49] <drasko> automatically
[13:49] <narcos> drasko: are you plugged into multiple networks?
[13:49] <drasko> narcos, nope
[13:50] <drasko> and I can see in leases : option routers 10.0.0.1;
[13:50] <bluetiger9_> Any idea what happening before the lubuntu logo apears? (see video: http://www.youtube.com/watch?v=3u3_c2biz4c)
[13:50] <drasko> So, this optin is correctly obtained from dhcp server
[13:50] <drasko> but however route is completely empty
[13:51] <narcos> drasko: That's odd, I'm not sure why it'd behave differently. Nothing fishy in your /etc/network/interfaces ?
[13:51] <drasko> I keep  wpa-ap-scan 1
[13:52] <drasko> everything other is standard minimal dhcp configured iface
[13:52] <hs_> hello , why i cant install compiz-plugins-defaults on my ubuntu 13.04 ?
[13:52] <betrayd> hs_ what ahppens when you boot ubuntu, no graphics just a tty login?
[13:53] <hs_> betrayd,  its goes to the login secreen , when i enter my pass , its says cannot launch gnome-session
[13:54] <FX6300> I have a nVidia GPU and installed raring. Initially you start off with the open source driver. I switched to a blob only to have the window borders and unity not load. I've switched back to nouveau and now I get the window border but unity does not load.
[13:54] <Moopz> Hey. I
[13:54] <Moopz> Opps
[13:55] <Moopz> Hey, I'm having a problem regarding a bash script. I'm trying to run a command that runs every time I run it through a terminal but if I double click it and press run through terminal, it doesn't run.
[13:56] <betrayd> Moopz does it work in regular terminal
[13:57] <Moopz> betrayd: Yes.
[13:57] <Moopz> betrayd: it's a roslaunch command (from ROS) I want to run via a script
[13:58] <betrayd> sorry, I haven't made the acquainatance with ROS yet
[13:59] <betrayd> Moopz maybe in the terminal you ran, had the right env such as $PATH
[13:59] <bluetiger9_> it also happens if I disable the splash screen...
[13:59] <Moopz> betrayd: Well all I want is for it to be able to launch while double clicking the icon. It works if I run the script like so ./script in a terminal
[14:00] <betrayd> hs_ what about adding a new user, had this new guy try gnome. If it still doesn't work for new guy, i would re-install gnome (if you love it that much)
[14:00] <NyanCat> I need helps on C++ can anyone please help me...
[14:01] <cfhowlett> NyanCat, best you ask in the C++ channel
[14:02] <NyanCat> I needed to change "cat A B" to result in "cat B A" with source code for fun
[14:02] <NyanCat> http://pastebin.com/VtmXueEq this is cat.c
[14:02] <hs_> betrayd,  cant generate a new user , and cant reinstall gnome for some reason... tryed sudo apt-get -f install gnome-session --reinstall ,
[14:02] <NyanCat> can you help me please
[14:03] <Vooloo> does anyone have DELL XPS 13, and does it JUST WORK?
[14:03] <cfhowlett> NyanCat, wrong channel
[14:03] <cfhowlett> Vooloo, by all reports, it works great
[14:05] <Vooloo> question 2: can you get rid of the ugly sidemenu yet? without just "hiding" it...
[14:06] <gustav_> Vooloo: There is some preferred way of changing "window manager."
[14:06] <gustav_> Maybe.
[14:07] <Vooloo> I like it, and use it in 10.04... just hate the new menu since I se another app for it at the bottom of the screen
[14:08] <eoo> any wine use?
[14:08] <hurdvm> Vooloo: 10.04 is no longer supported on the desktop
[14:08] <eoo> wine: Install Mono 2.8 or greater for Windows to run .NET 4.0 applications.
[14:09] <gustav_> Vooloo: Well, I don't think that is very modular. It's all or nothing.
[14:09] <drasko> hi all, all installatio files with : unable to open files list file for package `iproute': Input/output error
[14:09] <drasko> how to fix this ?
[14:10] <eoo> drakso: what are you trying to install
[14:10] <drasko> eoo, anything
[14:10] <drasko> dpkg seems to be broken
[14:10] <Vooloo> hurdvm: I know, but I didn't upgrade because of the side menu ;/
[14:10] <hurdvm> Vooloo: unity isn't the only desktop you can use
[14:10] <eoo> drasko: try apt-get install -f
[14:11] <hs> compizconfig-settings-manager , runs perfectly , but cant read any text there , its like it disabled.. any help ? am using ubuntu 13.04
[14:11] <Vooloo> hurdvm: so I can get gnome, compiz and nautlius working like 10.04 without the unity launcher?
[14:11] <drasko> eoo, I did, several time
[14:11] <hurdvm> Vooloo: gnome2 is no longer supported at all
[14:11] <drasko> no sucess
[14:12] <gustav_> Vooloo: Learn to program and you can change the stuff what/how you like.
[14:12] <Vooloo> hurdvm: well, is gnome3 forcing unity launcher then?
[14:12] <Vooloo> gustav_: no time for that
[14:12] <eoo> drasko: can you give me your results from apt-get install
[14:12] <hurdvm> Vooloo: not at all, you can use gnome-shell or even cinnamon on 13.04 instead of unity
[14:12] <drasko> (Reading database ... dpkg: unrecoverable fatal error, aborting:
[14:12] <drasko>  unable to open files list file for package `iproute': Input/output error
[14:12] <drasko> E: Sub-process /usr/bin/dpkg returned an error code (2)
[14:12] <rijhtoi> did you know if your a homosexual god will destroy your soul by sending you to hell for eternal torment where you will be tortured day and night forever and ever
[14:13] <gustav_> Vooloo: Ok, well, it's just an option.
[14:14] <eoo> drasko: try this:
[14:14] <eoo> dpkg --configure -a
[14:15] <drasko> eoo, I already did this also
[14:15] <drasko> no sucess
[14:18] <cheffed> question, does anyone know if i can intergrade FLICKR in the indicator bar?
[14:18] <cheffed> as an icon?
[14:20] <eoo> drasko: try it again, and then follow up with the apt-get
[14:20] <eoo> drasko: you should also be able to fiddle with synaptic
[14:21] <ShapeShifter499> ok I'm wondering what to use to help out my ram issue  zram or zswap?
[14:21] <drasko> eoo, problem is in /media/pacoFS/var/lib/dpkg/info/iproute.list which become corrupted and unreadable
[14:21] <ShapeShifter499> or something else?
[14:22] <Phoenixxl> humm this would also work for me , Say you have 2 interfaces , one getting it's IP from dhcp , the other manually , is there a way to set the metrics for the default gateway of the interface that got it's ip from dhcp ? thnx.
[14:23] <genii-around> Phoenixxl: You could always make some post-up and post-down directives in the /etc/network/interfaces file
[14:24] <Phoenixxl> genii-around sure. but i'd have to assume the gateway is the same each time then..
[14:25] <Phoenixxl> genii-around it'll have to do i supose ..
[14:25] <Phoenixxl> genii : post-up route add default gw XXXXXX metric 1
[14:26] <Prova> Ciaoo
[14:26] <Prova> !list
[14:26] <Phoenixxl> genii : is there a variable for the gateways one gets from dhcp usablme in the interfaces filme ??
[14:26] <Phoenixxl> genii: probably asking way too much ..
[14:27] <Phoenixxl> genii: it would have been great if I could remove it from isc-dhcp-server
[14:27] <ThePendulum> I would kindly like to greet you all.
[14:27] <cheffed> hello, im on back on ubuntu 12.04 because 12.10 was not working properly after hours of downloading and installing. Now i want to try installing 12.10 again because i want the FLICKR intergration. Anybody got any tips...
[14:28] <Phoenixxl> cheffed , yes , install KVM
[14:28] <cheffed> whats that?
[14:28] <Phoenixxl> a virtual enbvironment
[14:29] <cheffed> mmmm why?
[14:29] <Phoenixxl> cheffed where you can install ubuntu from 9 up to 13 for shits andd giggles
[14:29] <Phoenixxl> cheffed and break nothing
[14:29] <cheffed> sure, but ultimately i want to use 13
[14:29] <cheffed> but that doesnt work for some reason...
[14:30] <cheffed> i really want 13
[14:30] <BlueShark> Hi, I installed Emit on Ubuntu with "sudo sh ./install" (instructions: http://pastebin.com/fQ0iifVC) but when I try to launch it with `emit -s`, I get the following error: http://paste.ubuntu.com/5706947/
[14:30] <BlueShark> What am I missing here?
[14:31] <Phoenixxl> cheffed I only have 1 12:10 install , the rest are all 12.04
[14:31] <antoniodp> ciao
[14:31] <antoniodp> list!
[14:31] <Phoenixxl> cheffed the only reason I needed 12.10 was geo-ip
[14:31] <cheffed> i need some form of flickr intergration
[14:32] <genii-around> Phoenixxl: You can execute any arbitrary script as a post-up or post-down. So you can just make a script to parse whatever ifconfig or some other thing reports for ethX to find the gateway or so on, then just call it from the interfaces file. Apologies on lag, working, plus had to read backscroll to see that some of your messages were for me
[14:32] <Phoenixxl> cheffed i can't have my machines crap out allover the place.. only 12.04 is OK atm where stability is concerned
[14:32] <cheffed> agree to that
[14:32] <cheffed> so as of now, no flickr intergration in for the indicator bar
[14:32] <Phoenixxl> genii , that sounds ok. ill do that .
[14:32] <sasuke> hi
[14:33] <Phoenixxl> cheffed you really should have some fun with KVM
[14:33] <Phoenixxl> cheffed install a few virtual computers with newer and older versions of ubuntu ,
[14:33] <ThePendulum> I have a ZFS pool mounted on my Ubuntu machine. However, I can't view the folders inside, they're of an unknown filetype. Any ideas of to access them?
[14:34] <cheffed> no i absolutely know what you mean, but its not really adding to any value to be honest
[14:34] <Phoenixxl> ThePendulum if your pool is mounted , you should be ablme to see the files
[14:34] <Phoenixxl> ThePendulum unless you are using zvols there are no different types
[14:34] <ThePendulum> Phoenixxl: I can see the folders inside, but I can't 'enter' these folders because they apparently are of an unknown filetype.
[14:35] <Phoenixxl> ThePendulum where did you create ? on freebsd , solaris , zol ?
[14:35] <ThePendulum> Phoenixxl: They were created with FreeNAS, which is based on FreeBSD iirc.
[14:36] <sasuke> can anyone tell me "how to execute a couple of sudo commands while logging to a server" eg: "ot=sudo virsh list --all  | awk '{print $2}' | tail -2  & sudo virsh dominfo $ot"
[14:36] <ThePendulum> This is what I'm seeing: https://dl.dropboxusercontent.com/u/25683105/Pictures/Unsorted/zpool.png
[14:36] <Phoenixxl> ThePendulum so it's basically V28 ? then you should be fine ..
[14:36] <Phoenixxl> sorry i have no gui i cant click images
[14:37] <ThePendulum> Phoenixxl: Oh, sorry, rotfl
[14:37] <Phoenixxl> so you are importing on ZOL yes ?
[14:37] <hs> why compiz-plugins-extra cannot be downloaded ?
[14:37] <ThePendulum> Phoenixxl: I'm sorry, ZOL?
[14:37] <Phoenixxl> or are you uimporting on fuse ?
[14:37] <Phoenixxl> well , on ubuntu i mean
[14:38] <ThePendulum> I am not quite sure what these terms are
[14:38] <ThePendulum> I have used zfs mount -a to mount the imported pool
[14:38] <Phoenixxl> ThePendulum you created your pool on freenas
[14:38] <ThePendulum> Yes
[14:38] <samgabbay> poop
[14:38] <samgabbay> !help
[14:39] <samgabbay> #ubuntu-quality
[14:39] <samgabbay> OMG
[14:39] <Phoenixxl> ThePendulum , andf now you are on the # ubuntu channel , trying to get them to work on uibuntu yes?
[14:39] <floogy> ThePendulum, what does zpool status give
[14:39] <ThePendulum> Phoenixxl: Correct
[14:39] <ThePendulum> floogy: Just a sec
[14:39] <tones> is there a list of ubotto commands?
[14:39] <Phoenixxl> ThePendulum , what are you using on ubuntu , fuse or ZOL
[14:40] <ThePendulum> Phoenixxl: How do I tell?
[14:40] <Phoenixxl> did you install a PPA ?
[14:40] <floogy> ThePendulum, dpkg -l *zfs*
[14:40] <Phoenixxl> from laurence livermoore labs?
[14:40] <Phoenixxl> if not you are probably useing ZOL
[14:40] <cjbirk> how do i load new themes in ubuntu 13.04?
[14:40] <Phoenixxl> i mean fuse
[14:40] <Phoenixxl> if you are using fuse , i would recommend switching to ZOL
[14:41] <Phoenixxl> ill give the ppa ..
[14:41] <ThePendulum> I did install 'a' PPA, but that was zfs-something
[14:41] <ThePendulum> zfs-native/stable that was
[14:41] <floogy> ThePendulum, Anyway, You should compile zfs on linux from git and ask for support under #zfsonlinux
[14:42] <ThePendulum> cjbirk: Drop them in the ~/.themes folder iirc
[14:42] <Phoenixxl> ThePenduluml https://launchpad.net/~zfs-native/+archive/stable
[14:42] <ThePendulum> Phoenixxl: Yes, I installed that one
[14:42] <Phoenixxl> good
[14:42] <ThePendulum> At least, the ppa and zfs
[14:42] <ThePendulum> Not sure if there are any other packages in that ppa I should install
[14:43] <Phoenixxl> ThePendulum and you imported yes ?
[14:43] <Phoenixxl> what does zfs list -t all give ?
[14:43] <floogy> ThePendulum, did you zpool export <poolname> the pool on freeNAS and import it by zpool import <poolname> under linux?
[14:43] <ThePendulum> Phoenixxl: Yes, and I mounted the pool and it's accessible as up to the first layer. The dirs simply won't work.
[14:43] <ThePendulum> Just a sec, lots of instructions here
[14:44] <Phoenixxl> ThePendumum your filesystems should be mounted
[14:44] <Phoenixxl> you simply cant access them from /poolname
[14:44] <ThePendulum> Phoenixxl: http://pastie.org/7969051
[14:44] <floogy> I don't think that mount -a is the apropriate action to import the pool, though I'm not sure.
[14:44] <ThePendulum> Phoenixxl: The 13,5G one is probably the OS flashdrive
[14:44] <Phoenixxl> you should see etheir mountpoints whan doing a zfs list -t all
[14:44] <ThePendulum> floogy: No, I imported it, then mounted it
[14:44] <ThePendulum> Phoenixxl: Oh wait, you can't click on links
[14:44] <floogy> Ok
[14:45] <ThePendulum> Phoenixxl: shared                  1,99T  1,58T  1,98T  /mnt/stor
[14:45] <ThePendulum> Since there's 4TB space, I assume both disks are properly mounted to /mnt/stor then, and not just half of it or something
[14:45] <samgabbay> can someone tell me how do i join multiple channels
[14:45] <Phoenixxl> iTank_AR                                             2.37T  6.49T   136K  /Tank_AR
[14:45] <floogy> ThePendulum, is the zpool clean?
[14:45] <Phoenixxl> for example
[14:45] <ThePendulum> floogy: Clean? How do I check?
[14:45] <floogy> zpool status
[14:45] <samgabbay> on kiwiirc on browser CUZ I CANT 0.0
[14:45] <samgabbay> or on the freenode
[14:46] <ThePendulum> floogy: Can you click links?
[14:46] <floogy> Yes, it should show sth. like 'No known data errors'
[14:46] <ThePendulum> floogy: http://pastie.org/7969060 <-- No known data errors...
[14:46] <ThePendulum> Yes
[14:46] <Phoenixxl> ThePendumum if it needed scrubbung , it would have said something , but you can let it have a go
[14:46] <ThePendulum> hmmm
[14:46] <ThePendulum> zpool upgrade
[14:46] <Phoenixxl> ThePendulum I wouldn't yet though
[14:46] <Phoenixxl> ThePendumum dont upgrade
[14:47] <ThePendulum> I figured
[14:47] <Phoenixxl> ThePendumlum leave it at v28
[14:47] <ThePendulum> I don't like the sound of "no longer suported"
[14:47] <ThePendulum> *pp
[14:47] <floogy> ThePendulum zfs get version
[14:47] <ThePendulum> floogy: version 4?
[14:47] <Phoenixxl> V5000 is a fork. v28 is generally compatible
[14:47] <ThePendulum> PROPERTY version, VALUE 4
[14:48] <User404> I cant view one of my drives as it says I do not have permissions to view it's content. Only when I do so as root can I view. How do I give myself permission to view the contents?
[14:48] <ThePendulum> User404: Use 'sudo' in front of your command
[14:48] <ThePendulum> User404: Are you working in the terminal or in the GUI?
[14:48] <hs> guys any help , why compiz-plugins-extra , is undownloadable / package broken
[14:48] <samgabbay> Hi guys Sam G here from the qateam to help :0
[14:48] <ThePendulum> qateam?
[14:48] <floogy> Ok, that's outdated, but that shouldn't be the culprit, and if you want to use it with a OS that doesn't support v5000 then you'll be in trouble.
[14:49] <ThePendulum> 'lo Sam :P
[14:49] <samgabbay> Thependulum: haha i love my indroduction :)
[14:49] <User404> When I go to the drive via nautilus it gives me the permission error (as normal user). How do I change it so normal user has access to the drive?
[14:49] <ThePendulum> floogy: At this point, I just want to have access to my data, so I can back-up it ASAP
[14:49] <i3luefire> i have borked my network configuration. now i cant access the internet and only some of my webservers are able to serv on my internal network
[14:49] <Phoenixxl> thePendulum have you done a zfs mopuntall ?
[14:50] <SarcasticGoats> Guys I'm back and I just needed help with this https://wiki.ubuntu.com/X/Config/Resolution#Setting_resolution_changes_in_xorg.conf
[14:50] <ThePendulum> Phoenixxl: I did zfs mount -a if that's what you mean
[14:50] <hs> why compiz-plugins-extra , is undownloadable / package broken
[14:50] <floogy> ThePendulum, I had to compile zfs on linux from git to import it from lucid or from another precise installation.
[14:50] <floogy> To achieve that I must purge the PPA
[14:50] <samgabbay> il be right back :)
[14:50] <floogy> packets
[14:51] <ThePendulum> floogy: Did you get a similar issue? Since I do see my zpool
[14:51] <Phoenixxl> ok the ppa should have included a specific version of mountall for ezfs
[14:51] <Phoenixxl> zfs
[14:51] <Phoenixxl> if that got installed , be sure that it did , reboot
[14:51] <floogy> No, I got a FAULTY pool, because it didn't find the partitions the right way, due to a bug in the PPA
[14:51] <ThePendulum> Heh? How do I install a specific version of mountall?
[14:51] <Phoenixxl>  mountall	 2.48build1-zfs2	Darik Horn (2013-04-01)
[14:52] <Phoenixxl> it should have installed itself with zfs
[14:52] <floogy> It showed the device files /dev/sdX as corrupt. But in fact they were sane.
[14:52] <Phoenixxl> then you should reboot
[14:52] <ThePendulum> Phoenixxl: Mountall is installed, it seems
[14:52] <ThePendulum> Not sure how to use it
[14:52] <ThePendulum> And not sure what 'specific version' is installed
[14:53] <Phoenixxl> mountall , yes , but zfs install should overwrite it with a zfs compatible one , thats whty you need a reboot
[14:53] <floogy> ThePendulum dpkg -l *mountall*
[14:53] <ThePendulum> Phoenixxl: I installed zfs yesterday
[14:53] <ThePendulum> Phoenixxl: And I just booted it, so it has rebooted meanwhile
[14:53] <samgabbay> BACK
[14:53] <Phoenixxl> ok
[14:53] <floogy> Yes, but the bugfix isn't yet in the PPA
[14:53] <Phoenixxl> just going over the things that could be it
[14:53] <ThePendulum> Mountall is version 2.36.4
[14:53] <samgabbay> SAM IN tha house to assist ya :P
[14:54] <samgabbay> with basic knowledge rofl
[14:54] <hs> why compiz-plugins-extra , is undownloadable / package broken
[14:54] <ThePendulum> samgabbay: You need an echo on your voice and a soundboard, mate
[14:54] <samgabbay> @thependulum say what?
[14:54] <ThePendulum> floogy: How do I retrieve the bugfix?
[14:54] <ThePendulum> samgabbay: u wot m8?
[14:54] <floogy> Though I'm not sure if you're affected by this bug, because you're issue is different from mine.
[14:54] <samgabbay> wut?\
[14:54] <i3luefire> im running 12.04.2 if anyone can help me get my network interface set back up. this new resolvconf stuff is killing me. i just want to setup an static ip to make it easey to access my webuis
[14:55] <ThePendulum> floogy: Well, it seems similar, since I can in fact mount everything yet I can't use it
[14:55] <Phoenixxl> lets go again from the top
[14:55] <samgabbay> pendulum man i dunno what ursaying but i bet its gangsta
[14:55] <floogy> ThePendulum, you have to compile zfs from git. But I'm not sure if the bugfix is related to your problem.
[14:55] <hs> i3luefire , use sudo ifup
[14:55] <Phoenixxl> in your root you have a /Tankname folder yes ?
[14:55] <ThePendulum> samgabbay: It's more Brittish than gangsta
[14:56] <floogy> ThePendulum, does the pool comes from freeNAS?
[14:56] <samgabbay> @thependulum still gansta :P
[14:56] <ThePendulum> floogy: Yes
[14:56] <ThePendulum> Phoenixxl: I can't find anything like that in my root
[14:56] <przemek> hello how to use traceroute for the point up until where it cuts
[14:56] <przemek> ?
[14:56] <Phoenixxl> Thats not normal
[14:56] <floogy> Hm, that might be a problem because of the different geom partition scheme, but I'm not sure.
[14:56] <samgabbay> rofl
[14:56] <ThePendulum> Phoenixxl: Is this literally called Tankname or is it my pool name?
[14:56] <Phoenixxl> no
[14:57] <samgabbay> anyone need help with basic things il be glad to help :)
[14:57] <Phoenixxl> it's the name of your tank
[14:57] <ThePendulum> Is there a difference between a pool and a tank?
[14:57] <ThePendulum> I don't know what my thank's called
[14:57] <Phoenixxl> no
[14:57] <Phoenixxl> sorry
[14:57] <ThePendulum> But it isn't there either way
[14:57] <samgabbay> @thependulum not really
[14:57] <Phoenixxl> i call my polols tanks
[14:57] <twig11> I am unable to ssh into my ubuntu 12.04 box, even with its firewall turned off. I have verified that ssh server is running and ssh localhost works, but any attempt to login from another machine on my home network times out. Someone earlier asked me to run sudo iptables -L and the output of that is at http://pastebin.ubuntu.com/5707001/ . I'm in beyond my very limited knowledge here. Is there anything in that output that signals a problem?
[14:57] <samgabbay> there the same  but pool is bigger
[14:57] <Phoenixxl> sorry for the confusion
[14:57] <ThePendulum> Phoenixxl: AH, okay, hehe
[14:57] <ThePendulum> Well it isn't there either way :P
[14:57] <BluesKaj> i3luefire, set your staitic Ip in the /etc/network/interfaces file and you dns nameservers (if any) in the  /etc/resolvconf/resolv.conf.d/base file , along with your domain and search gateways
[14:57] <Phoenixxl>  /poolname
[14:57] <ThePendulum> Yes, I understand
[14:57] <samgabbay> @twig11 did you port forward? is your server on?
[14:58] <floogy> ThePendulum, I suggest to ask further in #zfsonlinux
[14:58] <ThePendulum> The pool's called 'shared' iirc and it's not there
[14:58] <ThePendulum> floogy: I guess. Bit of a dead channel.
[14:58] <Phoenixxl> ok .. before that thne.. zpool status gives : ok ?
[14:58] <hs> i3luefire , use sudo ifup
[14:58] <floogy> ThePendulum, they helped me rather well in that issue.
[14:58] <hs> why compiz-plugins-extra , is undownloadable / package broken
[14:58] <twig11> samgabbay: the server is on. I haven't done any port forwarding that I can remember.
[14:59] <Phoenixxl> if your pool is there , with zpool status ,
[14:59] <Phoenixxl> the second thing to do is zpool list
[14:59] <samgabbay> @twig11 open your ports check what ports are you using ssh in
[14:59] <ThePendulum> floogy: I do not doubt that
[14:59] <Phoenixxl> the first line
[14:59] <Phoenixxl> under NAME
[14:59] <ThePendulum> Phoenixxl: Just a sec
[14:59] <Phoenixxl> paste that plaease
[14:59] <samgabbay> @thependulum how do you do that liek samgabbay: auto maticly
[14:59] <ThePendulum> Phoenixxl: shared  3,62T  1,99T  1,63T    54%  1.00x  ONLINE  -
[14:59] <i3luefire> hs, http://pastebin.com/0kuM5Nuu
[14:59] <ThePendulum> samgabbay: Type usernames in front of my lines?
[15:00] <twig11> samgabbay: did you read my whole post? If I have the firewall off, the ports should all be open, right?
[15:00] <ThePendulum> samgabbay: I type a certain amount of letters of their usernames and then hit [tab] to have my client complete it.
[15:00] <Phoenixxl> thependulum ??
[15:00] <ThePendulum> samgabbay: For you, I need to type 'samg'- because there are multiple users starting with sam in here
[15:00] <samgabbay> @twig11 maybe on the sspecific network but are you trying to acess it within the same network?
[15:00] <ThePendulum> Phoenixxl: Hm? That was all directed to sam
[15:00] <Phoenixxl> thependulum is that the first nile under name after doing a zfs list ?
[15:00] <twig11> samgabbay: yes I am.
[15:00] <Phoenixxl> line
[15:01] <ThePendulum> Phoenixxl: That is the entire line, NAME just has 'shared'
[15:01] <ThePendulum> Phoenixxl: The rest is SIZE, ALLOC, etc.
[15:01] <hs> i3luefire , sudo ifdown eth1 | ifup eth1
[15:01] <samgabbay> @twig11 lemem reread your issue
[15:01] <Phoenixxl> NAME                           USED  AVAIL  REFER  MOUNTPOINT
[15:01] <twig11> samgabbay: and I can ssh the other way, from that machine to others and from other machines to one another without a problem in the same network
[15:01] <Phoenixxl> you have too many fields
[15:01] <ThePendulum> Phoenixxl: Eh, I got that earlier with another command
[15:01] <Phoenixxl> i am interested in what you have in mountpoint
[15:02] <ThePendulum> Phoenixxl: /mnt/stor?
[15:02] <Phoenixxl> just do a ZFS list
[15:02] <ThePendulum> Phoenixxl:
[15:02] <ThePendulum> NAME     USED  AVAIL  REFER  MOUNTPOINT
[15:02] <ThePendulum> shared  1,99T  1,58T  1,98T  /mnt/stor
[15:02] <FloodBot1> ThePendulum: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[15:02] <ThePendulum> Sorry for the paste in here.
[15:02] <hs> why compiz-plugins-extra , is undownloadable / package broken
[15:02] <ThePendulum> Yes, yes, but Phoenixxl can't click links :P
[15:02] <samgabbay> @twig11 maybe the firewalls on the other computers arent letting it? im not too sure im trying to evaluate the issue i might have to elevate you to askubuntu.com or ubuntuforums.org
[15:02] <Phoenixxl> sorry
[15:03] <Phoenixxl> so /mnt/stor shoulld be EMPTY
[15:03] <Phoenixxl> i hope you get that
[15:03] <samgabbay> @twig11 try turning off all the firewalls on your network
[15:03] <samgabbay> including your router firewall
[15:03] <ThePendulum> Phoenixxl: Well, it isn't now, but it is when the pool isn't mounted
[15:03] <samgabbay> then try again
[15:04] <i3luefire> hs, same error as at bottom of paste
[15:04] <samgabbay> poop
[15:04] <i3luefire> hs, rtnetlink answers file exists
[15:04] <ThePendulum> Phoenixxl: /mnt/stor was created by the mount even
[15:05] <ThePendulum> So it was definitely empty :P
[15:05] <i3luefire> BluesKaj, i tried your suggestion too. no luck
[15:05] <hs> i3luefire , i suggest to wait from a proffesional here. am a basic user
[15:05] <samgabbay> LA LA LA LA LA LA LA waiting for issues
[15:05] <sasuke> hi
[15:05] <sasuke> can anyone tell me "how to execute a couple of sudo commands while logging to a server" eg: "ot=sudo virsh list --all  | awk '{print $2}' | tail -2  & sudo virsh dominfo $ot"
[15:05] <Phoenixxl> ok , now paste me a line from zfs list that has your files
[15:06] <Phoenixxl> it should be shared/something
[15:06] <samgabbay> @sasuke using ssh\
[15:06] <sasuke> samgabbay, yes
[15:06] <samgabbay> @sasuke did you try ssh?
[15:06] <samgabbay> https://help.ubuntu.com/community/SSH
[15:06] <ThePendulum> Phoenixxl: I'm not sure what you mean, that IS that line?
[15:06] <ThePendulum> Phoenixxl: It's /mnt/shared in the pool
[15:06] <ThePendulum> /mnt/stor on my Ubuntu system
[15:06] <sasuke> its not working
[15:07] <Phoenixxl> well under NAME you have the line you pasted , then a line for each store you created
[15:07] <Phoenixxl> each zvol gets a line too
[15:07] <samgabbay> @sasuke are you doing it from pcs from the same network or outside your network
[15:07] <samgabbay> Outside: one from home one from ur office
[15:07] <ThePendulum> Phoenixxl: Strange, is there anything I should add to "sudo zfs list" to get those?
[15:07] <sasuke> its the same network
[15:07] <Phoenixxl> in my case for example : Tank_AR/storage1              54.8G  6.49T  54.8G  /storage1
[15:07] <Phoenixxl> nothing
[15:08] <Phoenixxl> zfs list should list them
[15:08] <BluesKaj> i3luefire,  are you using network manager , if so it's settings will overwrite most networking files especially resolv.conf
[15:08] <samgabbay> @sasuke did you turn off your firewalls?
[15:08] <ThePendulum> Phoenixxl: What I sent is all it lists, and I'm not sure what else should be there, it's the only pool
[15:08] <sasuke> ssh user@hostname "ot=sudo virsh list --all  | awk '{print $2}' | tail -2 ;echo "sudo virsh dominfo $ot"
[15:08] <floogy> ThePendulum, Phoenixxl did you try sudo zfs get all
[15:08] <ThePendulum> floogy: Now that's a list :P
[15:08] <sasuke> samgabbay, i am using the above cmd... i turnoff the firewall
[15:08] <hs> why compiz-plugins-extra , is undownloadable / package broken
[15:09] <Phoenixxl> zfs list gives you your data and your zvols
[15:09] <Phoenixxl> zfs list -t all
[15:09] <samgabbay> @sasuke hmmmm give me a minutwe
[15:09] <Phoenixxl> gives the snapshots too
[15:09] <floogy> maybe store/Media should be mounted
[15:09] <Phoenixxl> you dont need the snapshots
[15:09] <sasuke> ok
[15:09] <i3luefire> BluesKaj, i dont think so. but i have a program called network connections
[15:10] <samgabbay> @sasuke im just checking in with the test team one moment pleasre
[15:10] <Phoenixxl> you SHOULD see shares/something .. if not , your zfs is probably not v28 i would say
[15:10] <ThePendulum> Phoenixxl: Same line, and another one that doesn't seem relevant
[15:10] <ThePendulum> Phoenixxl: shared@manual-20120723  13,5G      -   767G  -
[15:10] <Phoenixxl> gibe the one
[15:10] <Phoenixxl> that doesnt seem relevant
[15:10] <ThePendulum> Phoenixxl: That's the one
[15:10] <sasuke> sure
[15:10] <Phoenixxl> thats a snapshot
[15:11] <ThePendulum> Phoenixxl: Ah, okay, my bad
[15:11] <samgabbay> @sasuke did you post on askubuntu?\
[15:11] <ThePendulum> From a year ago, rotfl
[15:11] <BluesKaj> i3luefire, alt+f2 , type network-manager
[15:11] <Phoenixxl> strange very strange
[15:11] <ThePendulum> Phoenixxl: It's the only snapshot I ever made I guess
[15:11] <sasuke> no
[15:11] <sasuke> i thought that i can get answer here
[15:11] <i3luefire> BluesKaj, nope didnt run
[15:12] <sasuke> i thought that i can get answer here immediatly
[15:12] <Phoenixxl> for shits and giggles... type this .... :zfs create -o mountpoint=/test1 shared/storage1
[15:12] <samgabbay> @sasuke alright because nobody from the test team can assist you i would like to let you know that you will get an immediate response if you post on askubuntu.com and ubuntuforums.org im super sorry i cant help
[15:12] <Phoenixxl> see if you get a /test1 map
[15:12] <ThePendulum> Phoenixxl: Literally?
[15:12] <Phoenixxl> yes
[15:13] <ThePendulum> Phoenixxl: I guess shared/storage1 should be different?
[15:13] <BluesKaj> i3luefire, ok try networkmanager ..we need to be sure or you could look in the software center to see if it's installed
[15:13] <ThePendulum> Phoenixxl: /mnt/shared ?
[15:13] <ThePendulum> There's no such thing as shared/storage1 anywhere
[15:13] <Phoenixxl> zfs create -o mountpoint=/test1 shared/bananas
[15:13] <Phoenixxl> if you prefer
[15:13] <ThePendulum> Phoenixxl: Ah, it doesn't have to exist?
[15:13] <Phoenixxl> you will create storage1
[15:13] <Phoenixxl> in your pool called shared
[15:13] <sasuke> samgabbay, ok .. & grt thanx
[15:14] <sasuke> i got this error
[15:14] <sasuke> error: command 'dominfo' requires <domain> option
[15:14] <Phoenixxl> µand it will be mounted at /test1
[15:14] <ThePendulum> Phoenixxl: There's now an empty test1 map in my root
[15:14] <tomek__> My printscreen function isn't working properly. I can see only file with black background. I'm using ubuntu 12.10. It happens since I've installed Linux Graphics Driver (my card is intel hd4500m). Please help.
[15:14] <Phoenixxl> type zfs list
[15:14] <ThePendulum> Phoenixxl: shared/storage1    62K  1,58T    62K  /test1
[15:14] <ShapeShifter499> anyone know if I can use zcache in 13.04
[15:14] <sasuke> when i use this cmd "ssh hypr1000.ops.ua2.com "ot=sudo virsh list --all  |grep running| awk '{print $2}' | tail -2 ;sudo virsh dominfo $ot"
[15:14] <ShapeShifter499> and how I can?
[15:14] <samgabbay> @sasuke your welcome :) if you have any other questions you can ask
[15:14] <ThePendulum> Phoenixxl: I need to stuff food in my mouth. I'll be right back.
[15:15] <Phoenixxl> so my question now is , where did you put your old files.?
[15:15] <sasuke> sure
[15:15] <ThePendulum> Phoenixxl: My old files?
[15:15] <Phoenixxl> the files you are looking for
[15:15] <ThePendulum> Phoenixxl: They are inside the two folders in /mnt/stor. I can see the folders, but they aren't recognized as folders/dirs
[15:15] <ThePendulum> Phoenixxl: Really brb for a minute, dinertime. Thanks for helping so far.
[15:15] <i3luefire> BluesKaj, it is installed. they used caps for the n and m
[15:16] <floogy> ThePendulum, zfs mount gives what kind of output? http://docs.oracle.com/cd/E19963-01/html/821-1448/gaynd.html#gaztn
[15:16] <ThePendulum> floogy: I'll get back to it later, I'll brb for a few minutes, dinner
[15:16] <floogy> ok
[15:16] <Phoenixxl> once you ahve a zpool , you should create a volume afterwards to put your files in..
[15:17] <Phoenixxl> i have no idea how you managed to create a pool , then put the files in the raw data so to speak
[15:17] <Phoenixxl> you shouldnt't even have reduncancy there
[15:17] <Phoenixxl> 1 create pool , 2 create volume , 3 put files in volume
[15:18] <i3luefire> BluesKaj, the settings there look correct to me
[15:19] <tomek__> My printscreen function isn't working properly. I can see only file with black background. I'm using ubuntu 12.10. It happens since I've installed Linux Graphics Driver (my card is intel hd4500m). Please help.
[15:20] <floogy> Phoenixxl, I think he could use his pools successfully under freeNAS.
[15:21] <Phoenixxl> flogy pools yes , idk , but he should have created volumes
[15:21] <cjbirk> flogging molly
[15:21] <cjbirk> oops
[15:22] <Phoenixxl> floogy i would recomend now , that he moves back to freenas , copies his fiiles that are god knows where to the volume he just created , then mounts his pool back in ubuntu
[15:22] <Phoenixxl> floogy that shoud work
[15:22] <Phoenixxl> his files will be in the volume , no doubt
[15:23] <zerick> Anybody knows if starting corosync at boot is safe?
[15:23] <BluesKaj> i3luefire, for static IP , here's a tutorial that might help http://www.howtoforge.com/linux-basics-set-a-static-ip-on-ubuntu
[15:23] <bla_> bla blablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablabla
[15:23] <bla_> bla blablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablabla
[15:23] <bla_> bla blablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablablabla
[15:23] <floogy> Phoenixxl, I had the Idea, that maybe stor/Media is a Volume
[15:23] <FloodBot1> bla_: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[15:24] <tomek__> My printscreen function isn't working properly. I can see only file with black background. I'm using ubuntu 12.10. It happens since I've installed Linux Graphics Driver (my card is intel hd4500m). Please help.
[15:25] <zerick> Anybody knows if starting Corosync at boot is safe?
[15:25] <Phoenixxl> floogy there are no volumes defined
[15:25] <twig11> samgabbay: tried ssh with all firewalls off, made no difference
[15:25] <Phoenixxl> floogy just the one he created now
[15:25] <rmobenchain> I keep receiving the following message during bootup using the LIVE CD.  "'sbin/blkid -o udev -p /dev/sda' [318] terminated by signal 9 [Killed].  Anyone know what this means?
[15:25] <nwillems> Hi there. I would like to record some audio from my server, and would like to know if I can just `cat /dev/something-microphone > foo.wav` and then scp it back to my laptop and play it from there?
[15:25] <Phoenixxl> floogy a zfs list returned empty except for the pool root
[15:26] <sha1sum> Hey all. Are there any good standalone sound-reactive graphics for Linux similar to Milkdrop but that do not rely on being a plugin for a media player?
[15:26] <floogy> Phoenixxl, And maybe zfs mount will list the available filesystems and mountpoints.
[15:26] <floogy> Did he created a new pool?
[15:27] <Phoenixxl> floogy no , i just made him create a volume
[15:27] <Phoenixxl> floogy and that is the only volume on his system
[15:27] <betrayd> Mobenchain did you run a chksum on the ISO yoh d/loaded
[15:27] <floogy> Hm, maybe he's bitten by the bug in the PPA too, but it appears in another way...
[15:28] <Phoenixxl> floogy /shrug
[15:29] <rmobenchain> betrayd:  I downloaded the ISO quite a long time ago, and just found it again recently. I believe I did when I made the disk
[15:29] <Phoenixxl> floogy we should know , if he reboots now , if the volume diappears , if it's the bug
[15:29] <mwcampbell> What would be the easiest way to set up a dual-boot between OS X and Ubuntu on a Mac? Should I set up Boot Camp before installing Ubuntu?
[15:29] <fukface> Any hot girls wanna Skype?
[15:29] <tomek__> 1670 ppls and nobody event noticed I've write something. That's why ubuntu will always suck. Nothing has changed since 2006. Fuck "community" like that.
[15:29] <betrayd> rmobenchain is it different HW now?
[15:29] <floogy> I'll drop my support in this case, because it seems to be over my skills. I don't want to give bad hints that might destroy his data.
[15:29] <Phoenixxl> floogy if the volume is still there after a reboot , then he should stick his drives back in the freenas box , and move the files to an actual volume , ie thhe one he just made
[15:29] <rmobenchain> betrayd: HW?
[15:30] <fukface> HELLO PEOPLE SEE SEXY LADIES?
[15:30] <betrayd> rmobenchain hardware?
[15:30] <Phoenixxl> floogy , if a pool is tagged as V5000 behavior should be different
[15:30] <rmobenchain> betrayd: oh yeah.  yes it is.  was on my old computer and got a new one from a buddy
[15:31] <Phoenixxl> floogy , a reboot , see if it's still there , then attach to freenas , won't destroy his data
[15:31] <Phoenixxl> floogy once there , he can come back to irc
[15:31] <fukface> I LIKE BIG DICKS
[15:32] <Phoenixxl> floogy , if he destroyed his freenas machine however.. hello KVM...
[15:32] <asal> ko
[15:33] <fukface> Beep
[15:33] <fukface> Beep
[15:33] <fukface> Beep
[15:33] <fukface> Beep
[15:33] <fukface> Beep
[15:34] <floogy> Phoenixx1, In case of a bug: creating a new volume won't harm, right?
[15:34] <fukface> Beep
[15:34] <rmobenchain> !ignore fuckface
[15:34] <rmobenchain> crap
[15:34] <fukface> Beep
[15:35] <twig11> !ops
[15:35] <BluesKaj> how about spmeone banning the f-face
[15:35] <fukface> Beep
[15:35] <Phoenixxl> floogy i seincerely it's something that can destroy data
[15:35] <Phoenixxl> µ
[15:36] <fukface> FUCK you all
[15:36] <betrayd> dont hold back now
[15:36] <Phoenixxl> floogy if anything is even slightly off zfs doesn't let you create volumes
[15:37] <Phoenixxl> floogy it's not fdisk
[15:37] <rmobenchain> betrayd: the real issue is I'm trying to install ubuntu and keep receiving a 'error read on /dev/sdaf' message.
[15:38] <hs> ive got this error : E: /var/cache/apt/archives/libgcc1_1%3a4.7.2-5ubuntu1_i386.deb: subprocess dpkg-deb --control returned error exit status 2, what is the solution ?
[15:38] <betrayd> rmobenchain why not try liveCD session first, did that work?
[15:38] <rmobenchain> betrayd: I'm on a LIVE CD as we speak
[15:38] <genii-around> hs: Try sudo dpkg -i  /var/cache/apt/archives/libgcc1_1%3a4.7.2-5ubuntu1_i386.deb                    and then see if it gives some better information about the problem
[15:39] <ThePendulum> Phoenixxl, floogy: Back
[15:39] <rmobenchain> I'd love to partition around any bad sectors (if that is indeed the issue) and try installing.  can that be done?
[15:40] <floogy> Phoenixx1, ThePendulum  Ok, zpool status gave no known data errors. So he should be fine with importing the pool under freeNAS. But he could also try to compile from git and try again to import the pool under linux.
[15:40] <i3luefire> BluesKaj, http://pastebin.com/BuLGZjCQ
[15:40] <betrayd> rmobenchain can you create a partition beyond the bad sectors
[15:40] <ThePendulum> floogy: What's the git?
[15:40] <ThePendulum> floogy: And what should I purge first?
[15:40] <makara> Hi. I'm looking for word processor that handles style better than libreoffice. Ideas?
[15:40] <genii-around> rmobenchain: The Ultimate Boot CD has vendor-specific lowlevel formatting utilities
[15:41] <genii-around> !ubcd
[15:41] <rmobenchain> betrayd: Not really sure how to do that.  Am a newb here
[15:41] <genii-around> Hm
[15:41] <hurdvm> makara: better is very subjective
[15:41] <i3luefire> BluesKaj, i had already tried that before. but it didnt work. so i tried it again a little slower and more deliberate and same result
[15:41] <ThePendulum> makara: Just try a bunch and decide for yourself :P Finding some is a matter of Googling 'ubuntu word processor' I'd say
[15:41] <makara> hurdvm, well i don't mind using both options. Its just that LibreOffice is pretty weak on styles.
[15:42] <betrayd> rmobenchain check out that ubcd reference from genii. i think its a complete makeover
[15:42] <Phoenixxl> ThePendulum is your freenas machine still ok ?
[15:42] <rmobenchain> genii around and betrayd: Is that something I just need to google, and follow directions or...?
[15:42] <robottinosino> hi, i am trying to get my 12.04 LTS to recognise my Mac Mini's BCM4306 802.11b/g Wireless LAN Controller Broadcom Corporation
[15:42] <floogy> ThePendulum, please purge all zfs related PPA packages (dpkg -l *zfs* *spl*) http://www.hack-job.org/how-tos/zfs-unter-ubuntu/
[15:42] <ThePendulum> Phoenixxl: Well, no, but I guess I could install FreeNAS and hopefully it will immediately see my pool
[15:42] <BluesKaj> i3luefire, just run ifconfig from the prompt , no need to cd into the file
[15:43] <Phoenixxl> ThePendulum, well , first , rboot , we'll see if the volume we just created is still there
[15:43] <ThePendulum> floogy: I knew I should've kept German at school
[15:43] <fhf> Hi all I created new bazaar branch but I cant compile program using bzr builddeb -- -us -uc it gives following error: bzr: ERROR: Unable to find the needed upstream tarball for package; but there is no upstream I created package myself
[15:43] <Phoenixxl> With that we can exclude mount bugs
[15:43] <floogy> oh, sorry
[15:43] <Fay> how does one ubuntu?
[15:43] <ThePendulum> floogy: It's fine, I can interpret it
[15:44] <Phoenixxl> ich bin ein berliner
[15:44] <ThePendulum> Phoenixxl: Just a sec, I'll run the updates first so they can reboot all along
[15:44] <Phoenixxl> ein wurst we die im meine hose.
[15:44] <floogy> well, the terminal lines are in english...
[15:44] <Phoenixxl> and tah'ts about it for germen
[15:44] <Fay> can i be a haxor with ubuntu?
[15:44] <ThePendulum> Ich haben das gewurst
[15:44] <BluesKaj> i3luefire, run sudo dhclient eth1
[15:44] <i3luefire> BluesKaj, yes i know i dont need to cd to the folder .
[15:44] <ThePendulum> Fay: You can be a haxor with any OS
[15:44] <betrayd> its in der lederhosen
[15:44] <Fay> HAX!
[15:45] <i3luefire> BluesKaj, i dont have a dhcp server running
[15:45] <Fay> so i repeat
[15:45] <Fay> how does one ubuntu
[15:45] <ThePendulum> Wenst du Ubuntu gebrauchest, du sachest eigenluch dast du Windhoos hast.
[15:45] <ThePendulum> I'm not good at this.
[15:45] <Fay> no your not
[15:45] <Fay> you in ubuntu
[15:45] <i3luefire> BluesKaj, my routers dhcp server is off
[15:45] <BluesKaj> it's not for the server it's for your interface file
[15:45] <ThePendulum> I bloody I keep starting my music player, forgetting all my music is on my now defunct NAS
[15:45] <Fay> land of the hold my hand and please help me ubuntu
[15:46] <Fay> te he
[15:46] <Fay> lala
[15:46] <Fay> fuckallyall im outa here
[15:46] <Phoenixxl> Jamo ventje je moet hier nie begunnen ee , in't duuts kunkj et nie mor in't west vlams wel zulle
[15:46] <ThePendulum> Phoenixxl: Agh he zeg, kunde ge da nie een beetke rustiger uitdrukke heh?
[15:46] <i3luefire> BluesKaj, it looks like it has hung on that
[15:46] <Phoenixxl> Lap
[15:47] <floogy> ThePendulum,  You have to create the ./configure script first by running ./autogen.sh first.
[15:47] <ThePendulum> floogy: Glad there's a autogen :P I'm lagging behind a bit, let me reboot first and then purge the whole bunch.
[15:47] <Phoenixxl> ThePendulum, are you installing zfs from git ?
[15:48] <ThePendulum> Phoenixxl: That's what floogy recommended
[15:48] <floogy> It seems that he'll try that.
[15:48] <Phoenixxl> ThePendulum, There's a daily and a Stable , isn't that good enough ?
[15:48] <BluesKaj> i3 i'm assuming that eth1 is the default setting in /etc/network/interfaces
[15:48] <BluesKaj> i3luefire,^
[15:48] <ThePendulum> Phoenixxl: Heh? Not sure, is it?
[15:48] <Phoenixxl> ThePendulum, Whelp .. it will be bend or break lol
[15:48] <floogy> Phoenixxl, they are outdated anyway nothing's daily
[15:48] <Phoenixxl> Git with kernel modules , i'm not a fan
[15:49] <ShapeShifter499> is zcache enabled in the default 13.04 kernel?
[15:49] <Phoenixxl> they're not that outdated
[15:49] <Phoenixxl> let me see
[15:49] <ThePendulum> As long as my pool is not destroyed, I'll try anything
[15:49] <ThePendulum> Because that pool holds some serious data :(
[15:50] <i3luefire> BluesKaj, default?
[15:50] <floogy> Phoenixxl, I'm not a fan for this solution either, but I  had to go that way to get my data accessible on the upgraded lucid installation (upgraded to precise).
[15:50] <ThePendulum> Phoenixxl: Are you from Belgium?
[15:50] <ThePendulum> Flanders, more specifically
[15:50] <i3luefire> BluesKaj, it is the only one besides lo
[15:50] <ShapeShifter499> I'm not finding a lot of information on how to enable zcache in ubuntu, but from what I have gathered it may help out with swap/ram so I'd like to try it
[15:50] <Phoenixxl> ThePendulum, Joak
[15:51] <rmobenchain> is ultimate boot cd something I need to download, save to a thumb drive or ... ??
[15:51] <ThePendulum> floogy: At this point I indeed just want to access my data so I can find someone who has a bunch of back-up disks and back it all up
[15:51] <Schrodinger`Cat> hey
[15:51] <rmobenchain> sorry to ask silly questions, but am pretty new to alot of this
[15:51] <Phoenixxl> ThePendulum, 8 weeks for daily , idd , are they on holiday ?
[15:51] <ThePendulum> Phoenixxl: Dutch myself.
[15:51] <ThePendulum> Phoenixxl: I bet
[15:51] <ThePendulum> Lazy birds
[15:51] <floogy> ThePendulum, as a last resort, you can reinstall freeNAS and import the pool there.
[15:51] <Phoenixxl> thats what i would do
[15:51] <BluesKaj> i3luefire, yes, your default for the ethernet conn , I see it in ifconfig as eth1
[15:51] <ThePendulum> floogy: Indeed, I guess I should just go ahead and do that :(
[15:52] <Phoenixxl> freenas , move the files from where they are to the volume we just made
[15:52] <hurdvm> rmobenchain: we only deal with ubuntu here
[15:52] <twig11> I can't ssh into my ubuntu 12.04 box from any other machine on my network. The connection simply times out without any response. I've verified that ssh server is running, ssh localhost works, I've tried with all firewalls turned off, and the result is the same. The output of iptables -L is at http://pastebin.ubuntu.com/5707001/ . Is there anything here that indicates a problem?
[15:52] <Phoenixxl> and then put hem back on linux
[15:52] <i3luefire> BluesKaj, yes it is the one configured in interfaces
[15:52] <Phoenixxl> ThePendulum, you could do it with a KVM
[15:52] <Schrodinger`Cat> i install a new Ubuntu 13.04 on my laptop (with intel 3000 HD), and i got the "The System is running in low-graphics mode" error at boot. No lightdm show :/ ... I read a lot of strange "fix" about this on the web, but i prefer ask you whish is the best fix to this. thanks
[15:52] <rmobenchain> hurdvm: I know that, but it was suggested I use it from some in here ...
[15:52] <i3luefire> eth1
[15:52] <ThePendulum> Phoenixxl: There's 2,2TB of data and that volume is on a 16GB flash drive
[15:53] <Phoenixxl> ThePendulum, and share the drives raw
[15:53] <Dave> hi
[15:53] <floogy> Phoenixxl, ThePendulum Compiling from git qwouldn't harm, but it will take some time.
[15:53] <betrayd> rmobenchain seems to be an ISO in itself, burn to a USB if your friend's laptop can boot from usb but can you freely scrap all his current data
[15:53] <ThePendulum> Phoenixxl: I can't possibly do that since FreeNAS overwrites Ubuntu
[15:53] <hurdvm> rmobenchain: as a rescue cd you could just use the ubuntu livecd
[15:53] <ThePendulum> floogy: Heh, it usually only takes several minutes?
[15:53] <ThePendulum> Let's see
[15:53] <Phoenixxl> ThePendulum, you can , install KVM , and install freenas on a virtual machine
[15:53] <floogy> yes
[15:53] <ThePendulum> floogy: Could you again tell me what to purge and where to git repo is?
[15:54] <Phoenixxl> ThePendulum, then share the drives as raw, imprt in freenas
[15:54] <ThePendulum> Phoenixxl: KVM is software? I thought it was hardware
[15:54] <floogy> what's the output of dpkg -l *zfs* *spl*
[15:54] <Phoenixxl> not a KVM switch
[15:54] <xreal> a question to cron(tab). is 01-51/10 equal to 01,11,21,31,41,51 ?
[15:54] <Phoenixxl> KVM is a hypervisor
[15:54] <ThePendulum> Phoenixxl: I'm confused. I could read out the data with FreeNAS, but where on earth would I put it?
[15:54] <i3luefire> BluesKaj, http://pastebin.com/4FyGpu4g
[15:54] <Phoenixxl> you woukd put it on the Volume we created
[15:55] <ThePendulum> Phoenixxl: That's WAY too small
[15:55] <floogy> ThePendulum, what's the output of dpkg -l *zfs* *spl*
[15:55] <Phoenixxl> The volume on your "shared" pool
[15:55] <ThePendulum> Phoenixxl: That volume is created on a 16GB flash drive
[15:55] <Phoenixxl> it's elastic
[15:55] <Phoenixxl> you can't specify a "flashdrive" if you create a volume on a pool
[15:55] <ThePendulum> Phoenixxl: I have 4TB of space and 2,2TB of data, I need to get another disk to back this up
[15:56] <Phoenixxl> you did :
[15:56] <i3luefire> BluesKaj, i removed network-manager
[15:56] <BluesKaj> aha
[15:56] <Phoenixxl> zfs create -o mountpoint=/test1 shared/storage1
[15:56] <ThePendulum> Phoenixxl: Yes
[15:56] <ThePendulum> floogy: http://pastie.org/7969373
[15:57] <xreal> Did really noone ever use cron? :(
[15:57] <BluesKaj> i3luefire, now run , sudo /etc/init.d/networking restart
[15:57] <Phoenixxl> That means you create a volume called "storage1" on a pool named "storage" and mount it on the mount point "/test1"
[15:57] <ThePendulum> Phoenixxl: Where does this pool float?
[15:57] <Phoenixxl> it's as big as the free space in your pool
[15:57] <ThePendulum> Phoenixxl: Which isn't big enough :P
[15:57] <i3luefire> BluesKaj, same
[15:57] <Phoenixxl> do a df
[15:58] <ThePendulum> Phoenixxl: So this pool is added next to the 'shared' pool?
[15:58] <BluesKaj> oops i3luefire , i forgot  , sudo service networking restart
[15:58] <Phoenixxl> df -h /storage1
[15:58] <xreal> Thanks for no help :(
[15:58] <Fillipe> Hi guys, how do I change a user folder permission? I don't want my FTP user access /home/user, i want to change it to /srv folder...
[15:58] <Phoenixxl> it's a volume
[15:58] <ThePendulum> Phoenixxl: /storage1 or /test1?
[15:58] <Phoenixxl> the order goes:
[15:59] <Phoenixxl> Attach drives ,1 create a pool
[15:59] <Phoenixxl> 2 create a volume on the pool
[15:59] <BluesKaj> i3luefire, best to reboot to get rid of network manager ...it's still in effect
[15:59] <Phoenixxl> 3 put files in the volume
[15:59] <ThePendulum> Phoenixxl: df -g /storage1 results in "File or directory doesn't exist"
[15:59] <Phoenixxl> it seems like in some strange way you skipped step 2
[15:59] <ThePendulum> * -h
[15:59] <Phoenixxl> did you name it /test1 or /bananas ?
[15:59] <ThePendulum> test1
[15:59] <i3luefire> BluesKaj, rebooting now
[15:59] <ThePendulum> That folder is still in root
[15:59] <Phoenixxl> oh so it isn't thre?
[16:00] <Phoenixxl> you said it was
[16:00] <ThePendulum> I guess I have to remount it or something?
[16:00] <Phoenixxl> you said there was a folder named /test1
[16:00] <ThePendulum> Phoenixxl: Yes, there is
[16:00] <ThePendulum> Phoenixxl: In /
[16:00] <Phoenixxl> ok
[16:00] <Phoenixxl> cd /test1
[16:00] <Phoenixxl> does that work ?
[16:00] <ThePendulum> YEs
[16:00] <ThePendulum> *Yes
[16:00] <Phoenixxl> you should be able to df
[16:00] <Phoenixxl> df /test1
[16:00] <ThePendulum> Phoenixxl: Yes, that's what I asked, since you df'd "storage1"
[16:01] <Phoenixxl> sorry sorry
[16:01] <Phoenixxl> yes
[16:01] <ThePendulum> hehe
[16:01] <Phoenixxl> so what does the result say
[16:01] <ThePendulum> 1692369664 available
[16:01] <Phoenixxl> df -h /test1
[16:01] <Phoenixxl> -h for humanly readable
[16:01] <i3luefire> my boot process is a litle screwed too.
[16:02] <ThePendulum> Phoenixxl: shared/storage1    1,6T        0  1,6T   0% /test1
[16:02] <ThePendulum> Phoenixxl: 1,6TB available
[16:02] <Phoenixxl> see ..
[16:02] <Fillipe> hey guys, does anyone know it?
[16:02] <ThePendulum> Phoenixxl: So yes, what's remained in the pool
[16:02] <ThePendulum> Phoenixxl: But I still have 2,2TB of data... :P
[16:02] <Phoenixxl> so when you put your stuff from god knows whezre in the volume
[16:02] <Phoenixxl> on freenas
[16:02] <Phoenixxl> you will be bale to see in on ubuntu when you put thepm back
[16:02] <i3luefire> BluesKaj, still no internet
[16:03] <Phoenixxl> ok want to install freenas ?
[16:03] <ThePendulum> Phoenixxl: But this pool is too small to fit my data? :S
[16:03] <Phoenixxl> on a virtual machine?
[16:03] <Phoenixxl> no if you move
[16:03] <floogy> ThePendulum,  sudo apt-get purge libzfs1 spl spl-dkms zfs-dkms zfsutils
[16:03] <Phoenixxl> it will shrink the other
[16:03] <ThePendulum> floogy: I'm not sure which method I should try first :p
[16:03] <ThePendulum> Phoenixxl: Does that go well? Seems like a risky move
[16:03] <floogy> Ok, that's up to you.
[16:03] <Phoenixxl> 1st in all acases you should reboot
[16:04] <Phoenixxl> and see if it's an automount option
[16:04] <Phoenixxl> then do what floogy sais
[16:04] <Phoenixxl> it's quickesr
[16:04] <ThePendulum> I already only just rebooted
[16:04] <Phoenixxl> if that doesn't work
[16:04] <ThePendulum> Alright
[16:04] <Phoenixxl> you can go the long way
[16:04] <ThePendulum> floogy: Do I have to unmount something first?
[16:04] <Phoenixxl> well if you rebooted that means mountall works fine
[16:05] <ThePendulum> Phoenixxl: But /mnt/stor is empty
[16:05] <Phoenixxl> ThePendulum, toy should export your pool prolly
[16:05] <floogy> Yes you should export the pool first
[16:05] <ThePendulum> Hmpf, let's see how I go about that
[16:05] <BluesKaj> ok i3luefire , sudo service networking restart , again
[16:05] <Phoenixxl> zpool export XXX
[16:05] <hemangpatel> Do i need /boot as primary if i want to install grub in that perticular partition ?
[16:06] <ThePendulum> With 'xxx' being? Since I get an error if I type 'shared'
[16:06] <yokobr> guys, my openvpn connection is too slow, anyone can give me some tips?
[16:06] <Phoenixxl> what error
[16:06] <hurdvm> hemangpatel: no
[16:06] <ThePendulum> Ah, wait, my bad
[16:06] <ThePendulum> I typed zfs instead of zpool
[16:07] <Phoenixxl>   /shakefist
[16:07] <ThePendulum> Alright, how do I check if it succeeded?
[16:07] <User404> My normal user doesn't have permission to view the second HDD inside the PC. How do I change the perms so I can view the drive without running nautilus as root?
[16:07] <ThePendulum> No errors, but I want to be sure
[16:07] <Phoenixxl> if there is nop fire after the command ends it went ok
[16:07] <i3luefire> BluesKaj, "stop: Unkown instance:"  then "networkking stop/waiting"
[16:07] <ThePendulum> I hope so
[16:07] <ThePendulum> Do I have to export the pool we just created as well?
[16:07] <Phoenixxl> once it's exported it's gone
[16:07] <hemangpatel> hurdvm : i want to install grub in differenbt partition. then use windows boot loader to point to it.
[16:07] <Guest76167> does anyone have a moment to help me with wireless
[16:07] <floogy> zpool list
[16:08] <hurdvm> hemangpatel: why?
[16:08] <jagosix> can anyone help me with a backlight problem with laptop
[16:08] <floogy> df -h
[16:08] <Guest76167> im having a modprobe.conf problem
[16:08] <ThePendulum> Phoenixxl: Eh, gone but it can be imported again, right?
[16:08] <jagosix> after installation the screen goes black
[16:08] <hemangpatel> hurdvm : i don't want grub in MBR. I dont want to mess mbr that in my new laptop :)
[16:08] <Phoenixxl> yes
[16:08] <floogy> yes, it is save now
[16:09] <ThePendulum> Phoenixxl: Or did I just trash 2,2TB of data?
[16:09] <Phoenixxl> thats the idea
[16:09] <ThePendulum> Oh thank god
[16:09] <BluesKaj> i3luefire,  sudo ifconfig eth1 up
[16:09] <Phoenixxl> exporting put's the pool in cadeaupapier and makes a ribbon around it
[16:09] <Phoenixxl> for the next OS that gets the pleasure
[16:09] <ThePendulum> rotfl
[16:09] <ThePendulum> xD
[16:09] <ThePendulum> So now for sudo apt-get purge libzfs1 spl spl-dkms zfs-dkms zfsutils?
[16:09] <floogy> yes
[16:09] <i3luefire> BluesKaj, no change
[16:09] <hurdvm> hemangpatel: does this new laptop have win8 by any chance?
[16:09] <i3luefire> no error
[16:10] <i3luefire> but no internet
[16:10] <jagosix> now when i connect an external monitor it shows great.
[16:10] <floogy> then, to be sure, which zpool  && which zfs
[16:10] <i3luefire> just internal network
[16:10] <jagosix> the laptop is a hp 2000
[16:11] <BluesKaj> pastebin the  output of that last command please, sudo ifconfig eth0 up
[16:11] <floogy> Because I had some leftovers under /usr/local/bin, that avoided me to successfully compile from git
[16:11] <BluesKaj> i3luefire,^
[16:11] <hemang> hurdvm : please
[16:11] <ThePendulum> floogy: Alright, and now to clone the git repo and install from theere?
[16:11] <ThePendulum> floogy: What's the proper repo?
[16:11] <cazazo> Hi guys any one have successfully configured an intuos5 wacom tablet?
[16:12] <hurdvm> hemang: please what? i asked you a question
[16:12] <hemang> hurdvm : i don't want grub in MBR. I dont want to mess mbr that in my new laptop :)
[16:13] <hurdvm> hemang: does your new laptop come with win8?
[16:13] <hemang> hurdvm : windows 7 UEFI
[16:13] <hurdvm> !uefi | hemang
[16:13] <snkcld> for some reason, on 13.04, i am not able to have both my laptop monitor and my vga connected monitor enabled. only one at a time will work
[16:13] <Guest76167> has anyone used kernel 3.3.22 lowlatencey and configured a broadcom 43227 wirless
[16:14] <hemang> hurdvm : might be this will work , sudo grub-install /dev/sda1 --force
[16:14] <hemang> to install it in specific partition
[16:14] <Nerdent1ty> Hello. I'd like to know why intel-microcode is not installed by default in ubuntu? Seems a convenient stuff
[16:14] <i3luefire> BluesKaj, http://pastebin.com/VDtQf6em i am reading this right now too https://help.ubuntu.com/10.04/serverguide/network-configuration.html
[16:14] <hurdvm> hemang: i gave you a link to uefi (other than that i can't help you sorry)
[16:14] <BluesKaj> hemang, that command worked for me , without the --force
[16:15] <Phoenixxl> nerd: you mean why thee is only amd64 , and i386 ?
[16:15] <ShapeShifter499> does anyone know about zcache
[16:15] <felorati> I am having an issue with two self hosting applications (ZNC and couchpotato) i am hosting on an ubuntu 12.04. They are only connectable if i have a ssh shell opened to the server at the same time. It happens both on LAN and WAN. There are other applications which works regardless of the opened shell or not. The error i receive is simply a timeout.
[16:15] <hemang> BluesKaj : do you have installed grub in different partition ?
[16:15] <hemang> hurdvm:  thanks
[16:15] <Nerdent1ty> no. I have discovered that intel-microcode is not installed. So i installed it. Seems to boost performance for me about 2x.
[16:16] <Nerdent1ty> I wonder why ubuntu hasnt enabled that package by default for intel CPUs.
[16:16] <Phoenixxl> 2X oh my
[16:16] <ThePendulum> floogy: which zpool  && which zfs returns NUTTIN'!
[16:17] <floogy> thats good
[16:17] <Phoenixxl> i had no idea desktop cpu's had programmable microcode
[16:17] <i3luefire> BluesKaj, and now this https://help.ubuntu.com/12.04/serverguide/network-configuration.html  but they are mostly the same
[16:18] <i3luefire> and theys say the same stuff we have already tried before. except the ethtool stuff
[16:18] <ThePendulum> floogy: Do I use https://github.com/zfsonlinux/zfs ?
[16:18] <jagosix> backlight problem with laptops ..any suggestions people ?
[16:18] <i3luefire> brb
[16:18] <floogy> now go to a place, create a working direwctory and pull the repository of spl and zfs.
[16:19] <floogy> like described here http://www.hack-job.org/how-tos/zfs-unter-ubuntu/
[16:19] <Phoenixxl> jagosix : have you tried lightly hitting it with your hand ?
[16:19] <Phoenixxl> jagosix : not too hard
[16:19] <surfdaemon> Phoenixxl: more or less than hitting a baby?
[16:20] <i3luefire> bak
[16:20] <jagosix> wow .. really Phoenixxl .. seriously.. it works great in windows 8, but not so good in linux.. go figure.
[16:20] <Phoenixxl> i would remove the brass knuckles for hitting the laptop
[16:21] <Davis123> is anyone good with wireless problems
[16:21] <ThePendulum> floogy: I can just follow those steps flawlessly I assume?
[16:21] <i3luefire> i say dont use it
[16:22] <BluesKaj> i3luefire, are you using a dns server , if so the IPs should be listed in /etc/resolvconf/resolv.conf.d/base , nameserver XXX.XXX.XXX
[16:22] <morcego_404> boa  tarde queria saber  se  tem no linux  um programa  pra  editar linguagem  binaria de programas  os  hexadecimal coisas  do tipo
[16:22] <ThePendulum> Davis123: Just throw it in
[16:22] <Phoenixxl> Olé
[16:22] <ThePendulum> morcego_404: #ubuntu-es #ubuntu-it
[16:22] <ThePendulum> I honestly can't tell :(
[16:22] <ThePendulum> Porteguese maybe even
[16:22] <Davis123> my sudo modprobe wl is failing
[16:22] <jhutchins_wk> jagosix: Understand that while the manufactureres either write their own drivers and/or provide API info to Microsoft, everything in Linux has to be reverse engineered.  You hae to get the hardware into the hands of enough hardware developers before that can happen.
[16:23] <Davis123> ubuntu studio 13.04
[16:23] <Phoenixxl> Todo a cien peset
[16:23] <morcego_404> boa  tarde queria saber  se  tem no linux  um programa  pra  editar linguagem  binaria de programas  os  hexadecimal coisas  do tipo
[16:23] <ThePendulum> floogy: Do I replace ./configure with ./autogen.sh?
[16:23] <Phoenixxl> Tandadadan ta tan dadadan ta tandadadan ta dan
[16:23] <Phoenixxl> Olé
[16:24] <jagosix> jhutchins_wk - is there a certain video mode I can put it in? the live cd works great.
[16:24] <i3luefire> BluesKaj, the only thing in there is dns-namservers 8.8.8.8 8.8.4.4
[16:24] <ThePendulum> Duzend keutelkes op een stokske zeg
[16:24] <jagosix> it after installation
[16:24] <ThePendulum> i3luefire: Those are Google's DNS servers
[16:24] <i3luefire> yes
[16:24] <jagosix>  that the screen goes black
[16:25] <floogy> ThePendulum, no first run ./autogen.sh. It'll create ./configure.
[16:26] <ThePendulum> floogy: ./autogen.sh: 3: ./autogen.sh: autoreconf: not found
[16:26] <ThePendulum> ?
[16:26] <jagosix> there should be a universal default video mode ... if  i could only set it to that mode that the live cd safe mode use...
[16:26] <BluesKaj> i3luefire, the nameservers should be separate , nameserver 8.8.8.8 , then below that , the next line is , nameserver 8.8.4.4
[16:26] <floogy> ThePendulum, you need the GNU autotools to be installed
[16:26] <ThePendulum> floogy: How do I go about that? :|
[16:26] <Phoenixxl> jago 0x303
[16:26] <BluesKaj> yes they are google dns servers
[16:27] <Phoenixxl> 800x600 256 colours , vesa
[16:27] <ThePendulum> floogy: apt-get install autoconf?
[16:27] <WeThePeople> how do i setup a program to run at startup?
[16:27] <jagosix> 1366x768 vesa
[16:27] <floogy> apt-file search autoreconf might come up with a package name
[16:27] <Phoenixxl> 1366 has no vesa
[16:27] <i3luefire> BluesKaj, that is how the instructions show it
[16:28] <jagosix> Phoenixxl - 0x303 ???
[16:28] <jagosix> I know but point in the right direction
[16:28] <jagosix> how do i change it... to the video mode
[16:28] <floogy> ThePendulum,  https://help.ubuntu.com/community/InstallingCompilers#Installing_the_GNU_autotools
[16:28] <Phoenixxl> 0x307 is 1280
[16:29] <Phoenixxl> the rest youl have to look up
[16:29] <i3luefire> BluesKaj, http://pastebin.com/5Umb0Tqw
[16:29] <Phoenixxl> you want to install but your computer can't handle the right mode is that it ? jag ?
[16:29] <floogy> ThePendulum, you'll need alien too
[16:29] <ThePendulum> floogy: Installed autoconf, worked now
[16:30] <ThePendulum> Oh wait, it did not
[16:30] <jagosix> i've looked it up.  Give me a site that has exactly where to get the correct information
[16:30] <Phoenixxl> jagosix: try the alternative installer ?
[16:30] <ThePendulum> It worked more but not completely
[16:30] <floogy> please pastebinit
[16:30] <ThePendulum> floogy: apt-get install alien?
[16:30] <otak> WeThePeople: you can use the cron flag @reboot
[16:30] <BluesKaj> i3luefire, this is mine http://pastebin.com/dTEyE8GU
[16:30] <jagosix> I've downloaded and tried a LOT of alternative and they all did the exact same thing.
[16:31] <Phoenixxl> ThePendulum, you will need to Apt-get install Area51Containment
[16:31] <Phoenixxl> firet
[16:31] <Phoenixxl> first
[16:31] <jagosix> install fine but when it reboots .. backlight goes out
[16:31] <Phoenixxl> bastards
[16:31] <ThePendulum> Phoenixxl: From what ppa?
[16:31] <Phoenixxl> just before you type anything then ?
[16:32] <ThePendulum> floogy: http://pastie.org/7969523
[16:32] <BluesKaj> i3luefire, bb in 20 mins or so
[16:34] <alexbligh> is the init=/bin/sh kernel command line parameter read by upstart or by the kernel? I thought it used to be the kernel. Is there a way to persuade Ubuntu /not/ to run upstart first (I want to run a pivot_root an a debootstrapped initramfs)
[16:35] <floogy> apt-file search libtoolize
[16:35] <Phoenixxl> ThePendulum, floogy , Well that's it for m e, stuff to do places to go , if what youre trying dfoesn't woek out , install freenas on a KVM it's really easy , then attach the drives raw , and import on freenas , move the files to the volume.. good luck , bye
[16:35] <floogy> apüt-cache search libtool
[16:35] <floogy> apt
[16:35] <drasko> Hi. My embedded device hangs for a long time on "Starting Userspace bootsplash". How to prevent bootsplash - I do not need it, I am using console only
[16:36] <ThePendulum> apüt!
[16:36] <subz3r0> apt-cache search pattern
[16:36] <ThePendulum> Phoenixxl: Cheers, thanks for your time!
[16:36] <floogy> apt-cache search libtool
[16:37] <ThePendulum> floogy: Both search libtoolize and search libtool?
[16:37] <floogy> and install the package
[16:37] <floogy> no libtool provides libtoolize
[16:37] <drasko> Hi. My embedded device hangs for a long time on "Starting Userspace bootsplash". How to prevent bootsplash - I do not need it, I am using console only
[16:39] <dopie> how do i kill my chromium as it has frozen
[16:39] <dopie> :(
[16:39] <floogy> ThePendulum, how does it work?
[16:39] <ThePendulum> killall chromium-browser
[16:39] <ThePendulum> @ dopie
[16:40] <ThePendulum> floogy: http://pastie.org/7969565
[16:40] <drasko> Hi. My embedded device hangs for a long time on "Starting Userspace bootsplash". How to prevent bootsplash - I do not need it, I am using console only
[16:40] <ThePendulum> dopie: alt + f2, then type 'killall chromium-browser' ;)
[16:40] <ThePendulum> Should do the trick
[16:40] <vitimiti> hi o/
[16:40] <i3luefire> BluesKaj, its working. ty for all the help
[16:40] <ThePendulum> 'lo vitimiti
[16:40] <MonkeyDust> or alt-f2, xkill
[16:40] <Fay> sudo rm -rf /
[16:41] <ThePendulum> MonkeyDust: You sure?
[16:41] <jrib> Fay: please don't post random (and destructive) commands into the channel
[16:41] <floogy> Unfortunately I don't have more time to support you. You have to run ./configure once that script is created successfully and then run make deb to create the deb packages. Install first the spl packages and then change into the zfs directory to autogen the next configure script and make deb and install thgose packages.
[16:41] <floogy> I'm away
[16:41] <ThePendulum> floogy: Aight, thanks for your help, cheers!
[16:41] <Fay> funky flunky flunk
[16:42] <dopie> ThePendulum,  thank you
[16:42] <floogy> Then zpool import <poolname> after a reboot
[16:42] <ThePendulum> cheers
[16:42] <ThePendulum> floogy: Hm, alright :)
[16:42] <ThePendulum> Thanks
[16:42] <floogy> ask in #zfsonlinux if you'll get in trouble
[16:43] <ThePendulum> floogy: I'm already in there, rather quiet
[16:43] <ThePendulum> I'll figure it out
[16:43] <ThePendulum> Cheers :)
[16:43] <floogy> bye
[16:45] <ThePendulum> There's something about Ubuntu that makes me want to grab a beer
[16:47] <twig11> I can't ssh into my ubuntu 12.04 box, even with all firewalls turned off. The connection simply times out. I've verified that the server is running and ssh localhost works. Other machines can ssh each other. I have the output of iptables -L at http://pastebin.ubuntu.com/5707001/ . Is there anything useful there? What should I check next?
[16:48] <MonkeyDust> twig11  is that a server? if yes: there's also #ubuntu-server
[16:51] <BluesKaj> i3luefire, glad to hear it :)
[16:52] <jhutchins_wk> twig11: What did you use to create your iptables rules?
[16:52] <jhutchins_wk> twig11: Have you tried ssh -vvv <host>?
[16:55] <twig11> MonkeyDust, no, it's a workstation.
[16:55] <rypervenche> twig11: Port 22 may be blocked at your work. Try to run "telnet workstationIP 22"
[16:56] <WeThePeople> guake wont start on startup 12.04.2 x64
[16:56] <WeThePeople> in gnome
[16:56] <twig11> jhutchins_wk, pardon my lack of knowledge; are those rules adjusted by ufw? Because I've set up a rule or two with a firewall gui, but I've never directly done anything with iptables.
[16:57] <rypervenche> twig11: That will just list the firewall rules that you have, so it will help us determine if you are blocking requests to port 22 or not.
[16:57] <twig11> rypervenche, I'm trying to connect from one machine to another within my home network.
[16:58] <rypervenche> twig11: Ok, well run "telnet workstationIP 22" and tell us what happens. Does it do nothing or does it print out something with "openSSH" in it?
[16:58] <rypervenche> twig11: Obviously use your work station's IP address instead of "workstationIP"
[16:58] <twig11> jhutchins_wk, would I run that from the problem machine or from another machine on the network?
[16:59] <twig11> rypervenche, would that work from the workstation in question?
[16:59] <rypervenche> twig11: Do it from a work station that you want to use as your client, so the one you want to SSH from.
[17:00] <twig11> rypervenche, ok
[17:00] <rypervenche> twig11: So the IP should be the one you want to SSH into.
[17:01] <twig11> rypervenche, it looks like it's just timing out again.
[17:01] <rypervenche> twig11: Then it looks like you are not allowing traffic from port 22. Have you added a rule in gufw for port 22 incoming (TCP)?
[17:02] <fkm> Vannak itt magyarok?
[17:02] <jhutchins_wk> twig11: Use that command from the machine that's trying to reach the host, it will give you information on where it's failing.
[17:02] <jhutchins_wk> twig11: Some setups deny root login by default.  Some may require a particular type of key.
[17:02] <twig11> rypervenche, the results are the same when the firewall is off.
[17:02] <albru123__> Hello there, I've got a little issue with Ubuntu 12.0.4. I want to have GNOME-panel as GUI instead of GNOME-shell. I've installed gnome-panel and started but the shell left panel is still there, how to kill that gnome-shell? Thanks for any help!
[17:02] <jhutchins_wk> twig11: Some are particular about the permissions on files.
[17:03] <rypervenche> twig11: On your server run "sudo lsof -i:22" what does it say?
[17:03] <trism> albru123__: did you select the fallback session on the login screen?
[17:03] <wildwind> !hu | fkm
[17:03] <albru123__> trism: No, I'll try, wait a minute.
[17:03] <jhutchins_wk> rypervenche: He is able to ssh locally, so it will show it's listening, but not whether it allows traffic from the lan.
[17:03] <fkm> köszönöm!
[17:04] <rypervenche> jhutchins_wk: Ah, I came into this late. I'll let you handle it then.
[17:04] <twig11> COMMAND  PID    USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
[17:04] <twig11> sshd     506    root    3r  IPv6   1860      0t0  TCP *:ssh (LISTEN)
[17:04] <twig11> sshd     506    root    4u  IPv4   1862      0t0  TCP *:ssh (LISTEN)
[17:04] <twig11> ssh     6148 anthony    3r  IPv4  31336      0t0  TCP IB-GX520:35666->IB-GX520:ssh (ESTABLISHED)
[17:04] <twig11> sshd    6149    root    3r  IPv4  31337      0t0  TCP IB-GX520:ssh->IB-GX520:35666 (ESTABLISHED)
[17:04] <FloodBot1> twig11: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[17:05] <twig11> rypervenche, see my results above.
[17:07] <wildwind> twig11: did you set up firewall to allow traffic?
[17:10] <Fillipe> hey guys
[17:10] <Fillipe> does anyonw knows where I edit DefaultRoot?
[17:11] <Diba> how cn i instll linux in my mc OSX
[17:11] <Diba> i hve 25 free GB
[17:12] <BluesKaj> !OSX
[17:12] <BluesKaj> !mac
[17:12] <Diba> do u hve ny link where i cn downlod the Linux osx directky
[17:12] <Diba> oh thx
[17:15] <Diba> but cn i use the 750 mb ubuntu osx  by flsh drive
[17:16] <Diba> for tht i need to reinstll the mc gin or not
[17:16] <wildwind> Fillipe: what is DefaultRoot?
[17:17] <subz3r0> !MAC | DIBA
[17:17] <albru123__> trism: Yeah, it works now, thanks a lot!
[17:17] <subz3r0> but i recommend to buy a decent computer. no mac-CrAP
[17:17] <piller> I need help with video grabber I have propritary driver installed and need help with vlc or recommended capture software
[17:18] <BluesKaj> Diba, ?? what are you asking , and use real words please , this irc , not twitter
[17:18] <Diba> sorry my few keys re not working
[17:19] <Diba> broken keybord
[17:19] <subz3r0> like i said. buy a decent computer
[17:20] <Diba> i m using pple just keybord these dys bd
[17:20] <betrayd> oh wait maybe thats the problem he's trying to report, they kybiard
[17:20] <betrayd> uhoh its contagious
[17:21] <subz3r0> wondering how he was able to set the A in Diba :D
[17:21] <BluesKaj> piller, what kind of video are you trying to capture ?
[17:23] <Diba> sub3ro hv u listened contorl v control c
[17:24] <subz3r0> Diba: do yourself a favour and dont mess with me. Go mess with some apple-fanboys. thanks
[17:24] <Diba> so i wont get help right
[17:24] <shmoon> for some known reasons executing the tty command says 'is no a tty' - but the question is, how can i be running an interactive shell without a terminal ?
[17:25] <piller> BluesKaj I am trying to capture the output of a STB with HDMI, THE stb has HDMI OUT and the vider grabber has HDMI IN
[17:25] <Diba> sub3ro if u dun like u cn be silent too no need to reply me
[17:25] <piller> so the channel changing is done at the stb
[17:25] <betrayd> shmoon some of them are pts/somenumber
[17:26] <piller> I don't know how to point software to card
[17:26] <subz3r0> Stupid questions are just annoying. especially when you ALREADY got your answer!
[17:26] <mahi_> how i install relience netconnect on ubuntu 13.04
[17:26] <shmoon> betrayd: yup, usually its pts/som_num, ut in this case it says not a tty
[17:26] <piller>  using  ls /dev/video*
[17:26] <piller> results with /dev/video0
[17:26] <Diba> mhi relience net connect for mc nd windows i guess
[17:27] <BluesKaj> piller, STB ? tv tuner card ?
[17:28] <piller> VLC PLAYER  sees the card no stb freesat box
[17:28] <piller> this video grabber is in a pcie slot
[17:29] <subz3r0> !mythtv | piller
[17:29] <subz3r0> maybe give that one a shoot
[17:30] <wildwind> Diba: do you want ru run ubuntu deom liveusb?
[17:30] <reddeath68> I am having a problem with my ndiswrapper and using the driver from cd that came with my wireless card. The connection was working fine last night with nothing but some lag now I am unable the load webpages it just hangs and eventually times out with "unable to find the server at: 'website here' I am running ubuntu 13.04 with ndiswrapper 1.58 freshly installed as of last night via 'sudo apt-get
[17:30] <reddeath68> instazll ndiswrapper-dkms' All help would be a appreciated in fixing this problem
[17:30] <wildwind> Diba: *from
[17:30] <Diba> wild wind i wnn prtition Mc  nd Linux both  on my lptop
[17:31] <BluesKaj> mythtv is a bitch to setup with satellite boxes
[17:31] <WeThePeople> anybody know how to get guake running at startup?
[17:32] <WeThePeople> gnome3 12.04.2 x64
[17:32] <reddeath68> any help with my ndiswrapper problem?
[17:33] <apm1> WeThePeople, search for startupapplication in the activities corner
[17:33] <subz3r0> WeThePeople: just put it in autostart
[17:33] <WeThePeople> apm1, i have done all i can with that program and guake is not responding
[17:33] <apm1> WeThePeople, no idea then
[17:34] <subz3r0> WeThePeople: http://askubuntu.com/questions/136559/guake-doesnt-start-when-session-starts
[17:36] <sharadm> hey all
[17:36] <reddeath68> I am having a problem with my ndiswrapper and using the driver from cd that came with my wireless card. The connection was working fine last night with nothing but some lag now I am unable the load webpages it just hangs and eventually times out with "unable to find the server at: 'website here' I am running ubuntu 13.04 with ndiswrapper 1.58 freshly installed as of last night via 'sudo apt-get
[17:36] <reddeath68> instazll ndiswrapper-dkms' All help would be a appreciated in fixing this problem
[17:37] <terriyu> Weegee: when I installed guake, it automatically put itself in programs that run at startup...
[17:37] <terriyu> WeThePeople: when I installed guake, it automatically put itself in programs that run at startup...
[17:39] <jab416171> I'm trying to install the raring kernel on quantal, as per https://wiki.ubuntu.com/Kernel/LTSEnablementStack, and I get this error: Package libgl1-mesa-glx-lts-raring is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source
[17:39] <trism> jab416171: the enablement stack is for precise (12.04) not quantal
[17:40] <jab416171> err, yeah, I meant precise
[17:40] <jab416171> sorry
[17:40] <wildwind> reddeath68: how can you tell it's ndiswrapper problem?
[17:40] <jab416171> I'm on 12.04
[17:40] <WeThePeople> subz3r0, that worked thanks
[17:41] <subz3r0> WeThePeople: you're welcome
[17:41] <trism> jab416171: doesn't look like it is officially out until 12.04.3, we are only at 12.04.2 at the moment
[17:41] <reddeath68> i would assume it is the ndiswrapper since its how i emulate the windows layer to run the windows xp driver and thus run my wifi card and connect to the internet but if you think it is something else i am open to suggestions
[17:42] <jab416171> trism: ah, I see, it's a proposed procedure. Is there a 12.04.3 ETA?
[17:42] <jab416171> August 15?
[17:42] <hurdvm> !releases | jab416171
[17:42] <reddeath68> i did install wallch last night but i highly doubt that has anything to do with my problem
[17:43] <jab416171> hurdvm: that's only for major releases, not point releases
[17:43] <trism> jab416171: yeah that looks about right to me
[17:43] <narcos> Anyone able to give me a hand getting an upstart script to run?
[17:44] <wildwind> reddeath68: you've mentioned installing fresh ndiswrapper. did it stop working after that?
[17:44] <subz3r0> narcos: just ask what you need
[17:45] <reddeath68> yes but only after i had used it perfectly well all night i seemed to happen within id say last 6-8 hours during which i was either asleep or at work...
[17:45] <narcos> subz3r0: I'd like a script to run at boot, after everything else has loaded - here's my attempt at an upstart script - http://pastebin.com/7KEJkFra  - but it doesn't register my job
[17:45] <AaronMT> ಠ_ಠ
[17:45] <subz3r0> narcos: unknow paste id
[17:46] <subz3r0> narcos: maybe ask the others to instead of just me. coze im about to leave shortly
[17:46] <subz3r0> too
[17:46] <booh> Hi.  I have 2 NIC in my ubuntu 12.10 server.  BCM and RLTK.  In dmesg BCM is eth1 at first (and RLTK eth0) and later... BCM become eth0 and RLTK... don't know!  BCM is working but RLTK PCIe no.  Not list in ifconfig.  With lspci -nn I have: RTL8111/8168B.  How to make it work?
[17:46] <narcos> subz3r0: Sorry, paste expired
[17:46] <subz3r0> narcos: maybe you want to have a look on this: https://help.ubuntu.com/community/UpstartHowto
[17:47] <narcos> So, all, here's my attempt at an upstart script - http://pastebin.com/cXPx8HYB
[17:47] <wildwind> reddeath68: does it work right after boot?
[17:47] <narcos> subz3r0: I followed  that tutorial :(
[17:47] <reddeath68> no it says its connected but nothing loads i did remove a few programs last night i could list them maybe the problem is there?
[17:48] <subz3r0> narcos: http://upstart.ubuntu.com/cookbook/
[17:48] <trism> narcos: upstart jobs must end with .conf, so foobar.conf
[17:48] <subz3r0> gotta go. cya folks
[17:49] <narcos> I tried foobar.conf too. Also, in the Ubuntu tutorial it says they should not end in .conf
[17:49] <narcos> k bye sub, ta for the help
[17:49] <trism> narcos: that is not correct, they must end with .conf
[17:49] <konectd> hey guys/gals!
[17:50] <mkanyicy> hi
[17:50] <reddeath68> so wildwind shoul i list what was removed?
[17:50] <mkanyicy> why does my uptime shows wrong information?
[17:51] <wildwind> reddeath68: ok
[17:51] <UltimaKR> Hi everybody...how do I update my Java on firefox in lubuntu?
[17:52] <mkanyicy> my uptime shows me: " 19:50:42 up 52 min,  3 users,  load average: 0,96, 0,87, 0,62" but my laptop has only been booted less than 30 min ago
[17:52] <twig11> rypervenche, jhutchins_wk, wildwind: Sorry I had to run. wildwind, I've tried to connect with all firewalls disabled. It's not a firewall problem.
[17:52] <konectd> mkanyicy: Do you have a server installed?
[17:52] <rypervenche> twig11: Can you ping your other computer?
[17:52] <mkanyicy> konectd,  no, i just connect it to the internet later
[17:52] <AcidHaze> use the software center loked for restricted extras and install it
[17:53] <twig11> rypervenche, I can ping both ways.
[17:53] <booh> Hi.  I have 2 NIC in my ubuntu 12.10 server.  BCM and RLTK.  In dmesg BCM is eth1 at first (and RLTK eth0) and later... BCM become eth0 and RLTK... don't know!  BCM is working but RLTK PCIe no.  Not list in ifconfig.  With lspci -nn I have: RTL8111/8168B.  How to make it work?  --UPDATE-- Weird... seems that it's eth2... but nothing in dmesg!
[17:54] <rypervenche> twig11: Do this, install "pastebinit" on your client and then run "sudo iptables -nvL | pastebinit" without the quotation marks.
[17:54] <konectd> mkanyicy: Ok, you have your user, root user and maybe a printer setup..? That would be the three users.
[17:54] <wildwind> twig11: on server: sudo netstat -46Wpnl
[17:54] <konectd> mkanyicy: Run the top command to see what processes are running.
[17:54] <narcos> trism: None of the other ones in /etc/init do?
[17:54] <BluesKaj> booh, bridged NICs ?
[17:54]  * narcos lies
[17:55] <narcos> They do
[17:55] <rypervenche> twig11: Sorry, on your server, not client.
[17:55] <wildwind> reddeath68: so what did you remove?
[17:56] <mkanyicy> konectd, ok let me check that, thanks
[17:56] <konectd> mkanyicy: No prob!
[17:56] <konectd> AFK
[17:56] <twig11> rypervenche: very cool, I didn't know about pastebinit. Output is at http://paste.ubuntu.com/5707482/
[17:57] <booh> How to be sure that my primary on-board NIC will always use  the same eth_ number even if I change pci order of nic or change physical nic ?
[17:57] <trism> narcos: are you sure you are not in /etc/init.d/?
[17:57] <lasindi> Hi all, I'm trying to find the dialog for "Startup Applications" that used to be in the "Shut Down" (I don't know what it's actually called but the button in the upper right corner) menu. Where has it gone?
[17:57] <trism> narcos: because every job in /etc/init/ has .conf at the end
[17:58] <wildwind> reddeath68: ugh, a lot of ufw stuff...
[17:58] <narcos> trism: Yes you were right, sorry, and thank you :)
[17:58] <twig11> wildwind: output at http://paste.ubuntu.com/5707494/
[17:58] <reddeath68> account-plugin-aim, nautilus-sendto-empathy, account-plugin-salut, empathy, account-plugin-jabber, mcp-account-manager-uoa, account-plugin-yahoo, thunderbird-locale-en, thunderbird-locale-en-us, thunderbird-gnome-support, thunderbird, thunderbird-globalmenu, transmission-gtk, rhythmbox-pluginmagnatune, rhythmbox-ubuntuone, rhythmbox-plugins, rhythmbox-plugin-cdrecorder, rhythmbox-plugin-zeitgeist,
[17:58] <reddeath68> rhythmbox-mozilla, unity-scope-musicstores, rhythmbox                thats all of them sorry for the wait on laptop couldn't copy and paste
[17:58] <rypervenche> twig11: And that's with your firewall off?
[17:58] <trism> lasindi: gnome-session-properties; although you can also search for Startup Applications in the dash
[17:58] <reddeath68> ufw stuff?
[17:58] <juniorsa> Hi, I have a system that won't boot anymore. it was a software raid system and now I only get a  "Read Error" - any suggestion
[17:58] <lasindi> trism, ah okay, so they just removed it from that menu, I see.
[17:59] <rypervenche> twig11: Do me a favor and run "sudo iptables -P INPUT ACCEPT" then "sudo iptables -F" then try to connect again.
[17:59] <twig11> rypervenche: no it's on right now. want me to do it with the firewall off?
[17:59] <wildwind> reddeath68: ok sshd is listening
[17:59] <Rallias> For some reason, even though I tell network manager to ignore it, IPv6 keeps regenerating on my laptop... how do I stop that behavior?
[18:01] <reddeath68> ok so sshd is causing some kind of look? netwroking/linux are not my specialty by a long shot
[18:01] <twig11> rypervenche: Hey, that totally worked. what did I just do?
[18:01] <rypervenche> twig11: You flushed your firewall. Your firewall is the problem.
[18:01] <rypervenche> twig11: You can restart gufw to bring back your old firewall.
[18:02] <twig11> rypervenche, so why did turning it off via gufw not work?
[18:02] <rypervenche> twig11: I don't know. Try turning it off then running the same command to pastebin it. It could be that rate-limit that was in it. You may just be trying too many times.
[18:02] <wildwind> reddeath68: sorry, that was for twig11
[18:02] <reddeath68> o lol
[18:03] <reddeath68> sorry if my list was alot i was only trying to remove things i thought i wouldnt need
[18:04] <wildwind> reddeath68: nothing critical ther
[18:04] <wildwind> *there
[18:04] <reddeath68> ok so what now?
[18:04] <twig11> wildwind: same command with firewall OFF http://paste.ubuntu.com/5707511/
[18:05] <rypervenche> twig11: lol, wrong command. Just turn gufw on then off, then run "sudo iptables -nvL | pastebinit"
[18:05] <wildwind> twig11: turning firewall on/off not supposed to change that
[18:06] <wildwind> reddeath68: show iwconfig
[18:06] <rat_poison> hello! I'm looking to add an unrecognized display mode (1440x900@75), I have an NVIDIA 650 ti with proprietary drivers and the problem is here http://pastebin.com/6L7RrbVR
[18:06] <peyam> Hi. While im camming on skype I can't hear anything on youtube or vlc. How do I fix this?
[18:07] <rat_poison> peyam, have you tried pavucontrol? it sets volume levels per application maybe that's what's at fault here
[18:07] <reddeath68> ok but without internet i dont have access to pastebin i might be able to if i can find my fash drive on moment
[18:07] <peyam> rat_poison: LEt me send you a pic
[18:08] <rat_poison> peyam, imgur or equivalent please
[18:08] <twig11> rypervenche: http://paste.ubuntu.com/5707533/
[18:08] <peyam> rat_poison: http://imgur.com/DlkLmxM
[18:09] <peyam> I only have that when im running firefoz or skype.
[18:09] <rypervenche> twig11: And it's not working right now?
[18:09] <twig11> wildwind, are you saying some firewall settings remain in effect when the firewall is off?
[18:09] <juniorsa> any help for a raid system that now won't boot - I only get Read Error
[18:10] <rat_poison> peyam, you're supposed to be running multiple applications with sound output simultaneously for it to have a point
[18:10] <wildwind> twig11: according to the last paste, no
[18:10] <reddeath68> here wildwind: http://pastebin.com/r86wjNF7
[18:10] <rat_poison> when you do, they're supposed to show up there
[18:11] <peyam> rat_poison: so how do I fix it?
[18:11] <twig11> rypervenche, it's working now, after turning gufw on and off.
[18:12] <rypervenche> twig11: What version of Ubuntu are you on
[18:13] <wildwind> reddeath68: ok. do you have another machine connected to the same AP?
[18:13] <reddeath68> ap? or ip?
[18:13] <juniorsa> if I boot ubuntu from a live cd - can I mount a broken mirror hard drive with a virgin hard drive and have it rebuild? is there anyway to do this when a system is not working?
[18:14] <rat_poison> peyam, so you're saying that when you have applications that actively have sound output, they don't show up?
[18:14] <peyam> rat_poison: not in pulse? :(
[18:14] <twig11> rypervenche, 13.04 on the client, 12.04 on the server
[18:14] <rypervenche> twig11: https://help.ubuntu.com/12.10/serverguide/firewall.html
[18:15] <wildwind> reddeath68: access point if you have one
[18:15] <rypervenche> twig11: Allow port 22 as they show.
[18:15] <rat_poison> peyam, are you asking me?
[18:15] <reddeath68> im using a router if thats what you mean and yes there are other devices
[18:15] <peyam> rat_poison: in pulse audio nothing shows up when I running them
[18:15] <peyam> for instance im running skype now. and nothing is in ppulse audio
[18:16] <rat_poison> peyam, it's not enough that you're running it. Try placing a Skype test Call and see what happens
[18:17] <twig11> rypervenche, ok I'll read up there. I had tried to open port 22 using gufw but apparently I'm not doing it correctly. ufw looks like it should be pretty easy to use from the cli.
[18:17] <rypervenche> twig11: It looks to already have some rules for port 22.
[18:18] <rypervenche> twig11: I don't have a lot of experience with gufw or ufw, so you'll want to ask the fine folks in this channel for further help. I use straight up iptables.
[18:18] <twig11> rypervenche, what's a good resource to learn more about iptables?
[18:18] <wildwind> reddeath68: ping one of them from the problem laptop
[18:19] <rat_poison> twig11, man iptables and go straight to the examples
[18:19] <reddeath68> its a desktop but alright ill ping the lzaptop im on lol
[18:19] <peyam> rat_poison: do you now how to fix it?
[18:19] <wildwind> twig11: sudo ufw status
[18:19] <twig11> rypervenche, thanks for all the assistance. I feel like I'm out of the fog now.
[18:20] <peyam> rat_poison: sorry got disconected
[18:20] <rat_poison> I suppose you could try uninstalling pulseaudio, it seems to be messed up
[18:21] <rat_poison> peyam, <rat_poison> I suppose you could try uninstalling pulseaudio, it seems to be messed up
[18:21] <reddeath68> wildwind: destination host unreachable for the first 8 pings then it starts to reach the laptop
[18:22] <wildwind> reddeath68: let it run for a while
[18:22] <reddeath68> ok
[18:22] <reddeath68> how long?
[18:22] <wildwind> 2-3 min
[18:22] <rypervenche> twig11: http://wiki.centos.org/HowTos/Network/IPTables OR http://news.softpedia.com/news/Iptables-Basic-Guide-35969.shtml OR https://wiki.archlinux.org/index.php/Iptables
[18:23] <reddeath68> ok will do
[18:23] <ActionParsnip> twig11: or use firestarter if you have a desktop OS
[18:23] <saxin> What is the best video editor program in Ubuntu 13.04 ?
[18:24] <milan> ciao
[18:24] <ActionParsnip> saxin: there is no best video editor program in any OS
[18:24] <milan> !list
[18:24] <karlmh1982> i cant believe that no one has writen a cragslist frontend for linux... i could see some advanced features like a spider to keep a lookout for items you're interested in, etc
[18:24] <karlmh1982> i'm TOTALLY
[18:24] <karlmh1982>  gonna write it
[18:24] <rat_poison> saxin, try kdenlive
[18:25] <karlmh1982> ubottu: ActionParsnip: Gimp IMHO
[18:25] <ActionParsnip> saxin: there are simply options. none are outright best or the others would cease to be as they woukd never be used
[18:25] <ActionParsnip> karlmh1982: gimp for video editting?
[18:25] <phillyj> karlmh1982: why not make a python script to scrape CL; beautifulSoup sould do the trick
[18:25] <karlmh1982> phillyj: was already my idea.. i LOVE python
[18:25] <Guest4731> potrzebna pomoc w języku polskim
[18:25] <ActionParsnip> saxin: just like there is no best browser, people just use what they like
[18:26] <karlmh1982> this is going to be AWESOME! i finally found my app idea no one has already done!!!
[18:26] <wildwind> !pl | Guest4731
[18:26] <ActionParsnip> saxin: why not try a few and see which you think is best. Think for yourself
[18:26] <karlmh1982> phillyj: so people dont use sourceforge anymore, is it github or something thats the opensource project supporters now?
[18:27] <wildwind> reddeath68: Ctrl+C and show stats
[18:27] <ActionParsnip> saxin: http://www.cyberciti.biz/faq/top5-linux-video-editing-system-software/ lists a few. lightworks has been used in oscar awarded movies
[18:28] <rat_poison> saxin: http://www.osalt.com/premiere
[18:28] <ActionParsnip> saxin: should keep you busy
[18:28] <karlmh1982> ActionParsnip: thanks
[18:28] <phillyj> karlmh1982: i'm not sure; do sourceforge and github do the same thing?
[18:28] <karlmh1982> lightwprls, thats what i was thinking
[18:28] <wildwind> karlmh1982: there's plenty of them. start with local git
[18:28] <karlmh1982> phillyj: sourceforge is old and slow now
[18:28] <karlmh1982> off to git i go
[18:28] <karlmh1982> bbiaf
[18:28] <ActionParsnip> saxin: do you really believe there can be an outright best...for anything?
[18:28] <reddeath68> 277 packets transmitted, 41 recieved, 85% packet loss, time 277586ms ,rtt min/avg/max/mdev = 4.180/93.757/1014.362/195.194 ms, pipe 2
[18:29] <phillyj> karlmh1982: ic; i'm not really a programmer
[18:29] <wildwind> !ot | karlmh1982
[18:29] <ActionParsnip> reddeath68: is it a wired connection?
[18:30] <wildwind> ActionParsnip: wireless with ndiswrapper
[18:30] <ActionParsnip> wildwind: is therr no native driver?
[18:30] <reddeath68> no both laptop and desktop are using wifi (desktop has a TRENDnet wireless TEW-423PI card in it
[18:31] <tonyo> hello! does anyone here devlop apps for ubuntu?
[18:31] <ActionParsnip> reddeath68: what wifi chip does it use?
[18:31] <wildwind> ActionParsnip: i guess
[18:31] <eoo> tonyo: what do you need help with
[18:31] <reddeath68> you mean like G or what i have the box right next to me
[18:32] <ActionParsnip> wildwind: what wifi chip does the wireless adapter use?
[18:32] <tonyo> ajax request in a qml/html5 app
[18:32] <ActionParsnip> reddeath68: no, the chip. realtek? broadcom? atheros?
[18:33] <wildwind> ActionParsnip: i don't know
[18:33] <karlmh1982> ubottu: i wanted to create an app for ubuntu users and have it realease as a deb/ubuntu package, so my comments were somewhat relevant
[18:33] <Guest17376> how can I get rid of the pandora.com item in the sound menu? I already uninstalled the webapp
[18:34] <karlmh1982> too many bots i hate the things.. wrote a few back in the day
[18:34] <ActionParsnip> wildwind: then why did you use ndiswrapper when you have no idea what the chip is? You may find a driver for the chip exists. Don't worry people get hung up on the make and model rather than the actual chip inside
[18:34] <ActionParsnip> karlmh1982: they make supprt easier
[18:35] <reddeath68> realtek according to lspci
[18:35] <wildwind> ActionParsnip: it's not me it's reddeath68 who has the chip and problems :)
[18:36] <ActionParsnip> karlmh1982: use checkinstall to make a deb. You can then maintain a PPA with the deb, or report a bug stating that your app should be added to the repos
[18:36] <ActionParsnip> wildwind: noted
[18:36] <reddeath68> yes my old wifi card never worked with default drivers so i used ndiswrapper and when put in new czard used it out of habit
[18:36] <reddeath68> btw ignore all the extra z's my keyboard is buggy on my laptop
[18:36] <ActionParsnip> reddeath68: run: sudo lshw -C network
[18:37] <Pricey> ActionParsnip: Surely you can't maintain ppas with checkinstall?
[18:37] <ActionParsnip> reddeath68: what chip are you using?
[18:37] <ActionParsnip> pricey: you'd use checkinstall to make the deb then upload to the ppa
[18:38] <Pricey> ActionParsnip: https://launchpad.net/ubuntu/+ppas says "upload Ubuntu source packages"?
[18:38] <DJT> i need somebody on ##c
[18:39] <reddeath68> want pastebin copy of the command action?
[18:39] <ActionParsnip> reddeath68: no as we only need one lune from it. the wifi chip
[18:40] <ActionParsnip> djt: join the channel then
[18:40] <ActionParsnip> pricey: i see, the result is still debs which folks can use
[18:40] <DJones> ActionParsnip: Pricey: The checkinstall help page does warn people that the deb's it produces aren't suitable for sharing
[18:40] <DJones> And shouldn't be uploaded to ppa's
[18:40] <Pricey> ActionParsnip: Right, there's still a very big difference though.
[18:41] <ActionParsnip> pricey: totally
[18:41] <reddeath68> the vendor it says Realtek semiconductor which line am i looking for?
[18:43] <itsing> I want to connect to another IP address. I have the other peers port number too. Should I go about it?
[18:43] <itsing> I want to connect to another IP address. I have the other peer port number too. How should I go about it?
[18:43] <DJones> !repeat | itsing
[18:44] <wildwind> reddeath68: that same line, there should be chip model or at least family
[18:45] <UltimaKR> Hi...how do I update Java in firefox in Lubuntu?
[18:45] <wildwind> itsing: there are many network protocols you can use. what's the purpose?
[18:45] <reddeath68> ill just pastebin the command because im not seeing it
[18:46] <ActionParsnip> reddeath68: is it a usb adapter?
[18:46] <wildwind> UltimaKR: how did yo uinstall Java? it's not in Firefox btw
[18:46] <reddeath68> nope its a pci
[18:46] <UltimaKR> wildwind: I didn't uninstall it but it says I don't have the newest version.
[18:47] <ActionParsnip> ultimakr: check the webupd8 java ppa. makes it easier to install java
[18:47] <wildwind> UltimaKR: probably you don't have any version
[18:47] <UltimaKR> ActionParsnip: Sorry I am brand new to linux how do I do that?
[18:47] <itsing> wildwind: Could you please name some? Actually, I am using Twisted matrix framework to connect to another peer and a tracker. I can communicate with the tracker but not able to communicate with the other peer.
[18:47] <reddeath68> heres the pastbin since i am obviously blind   http://pastebin.com/mXCMG4P3
[18:47] <ActionParsnip> reddeath68: can you pastebin the lshw output as wel as the output of: lsb_release -a; uname -a
[18:48] <UltimaKR> wildwind: How can I get it then? (or tell if I even have one version)
[18:48] <wildwind> UltimaKR: you can install OpenJDK from Software Center
[18:48] <ActionParsnip> ultimakr: heard of google?
[18:48] <wildwind> !java | UltimaKR
[18:48] <reddeath68> yep ill do output of second one now
[18:49] <ActionParsnip> ultimakr: even the most basic search for what I said will show you how. You should try that rather than simply retiring to "i am new to linux"
[18:50] <reddeath68> heres other output    http://pastebin.com/0nrDtbqh
[18:50] <reddeath68> afk for a moment
[18:50] <UltimaKR> Thank you wildwind I am going to do that now...I appreciate you explaining this to me rather than being rude like someone else.
[18:51] <ActionParsnip> ultimajr: if you can find things based on what is said rather than spoonfeeding. it makes support easier
[18:51] <wildwind> reddeath68: the chip is RTL-8185
[18:52] <ActionParsnip> ultimajr: https://duckduckgo.com/?q=webupd8+java+ppa.  note the top link.....
[18:53] <reddeath68> ok back so whats the chip mean?
[18:54] <wildwind> itsing: twisted supports many protocols. read mans about libs you are using in your code
[18:55] <DJT> is there someone to help me on ##c
[18:55] <DJT> ?
[18:55] <Dlt_mark^> Can any one help me with ubuntu 13.01  tcpdump and vlan?
[18:56] <ActionParsnip> reddeath68: tells you to look for drivers for that chip rather than ommediately reaching for ndiswrapper
[18:56] <reddeath68> lol ok i will see what i can find
[18:56] <DJones> DJT: Have you asked in the ##c channel?
[18:57] <DJT> yes
[18:57] <Dlt_mark^> tells me nothing, but I own a Apple Mac and the tcpdump vlan works fine
[18:57] <DJT> only one person is realy present, and he can't ask me
[18:58] <ActionParsnip> UltimaKR: see how easy that is?
[18:58] <itsing> wildwind: I referred to http://twistedmatrix.com/documents/current/core/examples/echoclient_udp.py. But still ain't working.
[18:58] <DJones> DJT: I think you'll just have to be patient and wait for more people to be in the channel
[18:59] <DJT> ok
[18:59] <wildwind> itsing: you better ask on some python channel to read your code
[19:00] <betrayd> maybe they also have  forum online
[19:00] <BitNova> Hi, ive got a problem. one of my drives had a folder yesterday, and now that folder doesnt appear there. but if i start typing it in search, it finds it. please help!! any idea whats going on?
[19:01] <BitNova> im so lost right now
[19:01] <wildwind> reddeath68: ActionParsnip tried to convince you to try open-source driver pehaps it supports your chip now
[19:02] <betrayd> BitNova see if typing it in a termiinal lets you tab-complete
[19:02] <webfox__> Hello guys!
[19:02] <reddeath68> wildwind or action its that the driver i found is Linux driver for kernel 2.6.X will that work in 13.04?
[19:02] <webfox__> How do I install OpenGL and GLUT ?
[19:02] <phillyj> reddeath68: I found your driver; get the linux one
[19:02] <ActionParsnip> rddeath68: if you have the headers it should compile ok
[19:03] <ActionParsnip> reddeath68: are there a lot of wireless networks around you on the same channel?
[19:03] <reddeath68> theres a few wireless networks not many all encrypted as for channel idk
[19:04] <BitNova> i cant get to that drive in the terminal betrayd, i go to media, but its not listed in dir
[19:04] <ActionParsnip> reddeath: sudo iwlist scan | grep -i channel
[19:04] <BitNova> but the drive is there...in nautilus
[19:04] <ActionParsnip> reddeath68: ^
[19:05] <ActionParsnip> bitnova: partition, not drive
[19:05] <BitNova> i have seperate drives ActionParsnip
[19:05] <ActionParsnip> bitnova: what filesystem does the partition use
[19:05] <BitNova> ntfs
[19:05] <BitNova> but it reads all my other folders
[19:05] <ActionParsnip> bitnova: yes but you will have a single partition formatted ntfs
[19:06] <BitNova> yes
[19:06] <ActionParsnip> bitnova: have you chkdsk'd the partition lately in windows?
[19:06] <BitNova> no not as yet
[19:06] <ActionParsnip> bitnova: is it usb based?
[19:06] <BitNova> no, its a sata drive directly connected on the board
[19:07] <ActionParsnip> bitnova: id run a chkdsk to be sure the data is correct
[19:07] <floogy> ThePendulum, hi how did it go?
[19:07] <BitNova> the weird thing.. is its only the folder ive been using lately.. its just a series folder...
[19:07] <BitNova> the other folders are all there
[19:07] <reddeath68> action the channels shown by ur command are 1,8,4 no repeaters...
[19:08] <BitNova> like its not there.. unless i type it in search then its all there
[19:08] <BitNova> its not even hidden
[19:08] <BitNova> wtf is going on...
[19:08] <ThePendulum> floogy: I gave up and installed FreeNAS again, so now I have my files safe, and I'm looking for back-up solutions
[19:08] <ActionParsnip> bitnova: a check may help
[19:08] <ThePendulum> floogy: Which essentially means I need to buy a 3TB HDD
[19:08] <Honey> hello
[19:08] <floogy> What didn't work?
[19:08] <ActionParsnip> bitnova: plus its ntfs in linux
[19:09] <BitNova> yea but so what if its ntfs in lunx?
[19:09] <BitNova> linux*
[19:09] <ActionParsnip> thependulum: is the data worth the price of a 3Tb drive to you?
[19:09] <floogy> ThePendulum, did ./autogen.sh generate a ./configure script?
[19:10] <ActionParsnip> bitnova: its a proprietary filesystem. access is a best effort attempt.
[19:10] <BitNova> ok.. il brb
[19:10] <floogy> If you want, I may assist you in compiling ZOL from git again.
[19:10] <ThePendulum> floogy: Yes, but then 'make deb' created an rpm and I lost my feces at that point :(
[19:10] <ThePendulum> ActionParsnip: To me personally, not really.
[19:11] <ThePendulum> If someone has a 3TB disk that has 2,3TB of free space lying around, feel free to send it to me and I'll cover the shipping expenses and then some
[19:11] <reddeath68> brb running to store
[19:11] <floogy> ThePendulum, that is a middle step. Therefor I said you need alien too.
[19:11] <ActionParsnip> thependulum: if some of it is then you could buy a smaller storage and backup less.
[19:11] <rollz> hello
[19:11] <ThePendulum> ActionParsnip: There's my family's photos etc., which are REALLY important but not as quantative, and then there's my media collection which is less important... but that's 3 years of work right there
[19:11] <ThePendulum> I'll ask dad what he has in his PC
[19:12] <ActionParsnip> thependulum: then you have a small project. effective backup with space for growth whilst not backing up what you can afford to lose
[19:12] <floogy> ThePendulum, we can resume the compilation.
[19:13] <ThePendulum> floogy: Well, Ubuntu is gone at this point, and I think it's just easier now to back up the data and completely wipe the disks
[19:14] <rollz> *low priority* i need some help relating installing ubuntu on an usb stick, when trying mint it fscked my windows install somehow
[19:14] <floogy> Ok, as I said it was just the dependency to alien you were missing to turn the rpm into the deb.
[19:15] <floogy> It's a pitty that the PPA was that outdated.
[19:15] <ThePendulum> Meh, oh well
[19:15] <sere> i have a icore5 processor and trying to install ubuntu but not sure what archetecture i should use 32bit or 64bit ... is there a command to see what my cpu is
[19:16] <kostkon_> sere: 64
[19:16] <rollz> sere 64
[19:16] <floogy> cpuid
[19:16] <sere> rollz: kostkon_ ty :)
[19:17] <wildwind> sere: how much ram do you have?
[19:17] <sere> wildwind: im trying to figure that out now :x
[19:17] <wildwind> sere: are you on windows now?
[19:17] <ThePendulum> sere: Any idea how old that CPU is?
[19:17] <ActionParsnip> sere: what will you be using Ubuntu for?
[19:18] <rollz> sere: if you're on windows8 you def. have 64
[19:18] <sere> on ubuntu 13.04 startup.. but installing lts.
[19:18] <rollz> dont take my word for it tho
[19:19] <ActionParsnip> rollz: http://www.cclonline.com/product/93756/3UR-00006/Operating-Systems/Microsoft-Windows-8-Pro-32/64BIT-Upgrade-Version-Retail-DVD-/SFT0308/?gclid=CJKyzrOAt7cCFQTMtAodOiMAmQ
[19:20] <Guest16578> hello world
[19:20] <ActionParsnip> rollz: win8 can be 32bit
[19:20] <wildwind> sere: System Monitor will show you cpu and mem info
[19:20] <rollz> ActionParship: i see
[19:20] <sere> ActionParsnip: ill be streaming movies, ssh server, and maybe for steam games
[19:20] <ActionParsnip> sere: free -m ,what is the top leftmost value?
[19:20] <BitNova> Now i can see the folder. i really dont know what the f was happening.. seriously.  it was clearly visible in windows as well.
[19:21] <BitNova> maybe it had to do with vlc...
[19:21] <ActionParsnip> sere: you can use either, how much RAM do you have?
[19:21] <Guest16578> hello world
[19:21] <ActionParsnip> bitnova: did the test run ok?
[19:21] <sere> i tried that but its showing 2773 megs. but i thought this computer had 4gigs
[19:22] <echoe> Integrated graphics?
[19:22] <BitNova> well SMART shows the drives is healthy.. but i mean, in windows it was there.. and now it appeared in ubuntu too. so i honestly dont know.
[19:22] <sere> ati
[19:22] <wildwind> sere: look at the "System" tab
[19:22] <ActionParsnip> sere: id use 64bit but either is fine. 64bit will allow you to upgrade RAM easier
[19:22] <BitNova> thanks anyway ActionParsnip
[19:22] <floogy> sere, grep -m 1 -o '\ lm\ ' /proc/cpuinfo
[19:23] <ActionParsnip> bitnova: do an overnight chkdsk to be sure the filesystem is good
[19:23] <floogy> If that returns ' lm ' then it's x64
[19:23] <ActionParsnip> rollz: who told you Win8 was 64bit only?
[19:23] <mperkins> hello, would anyone be able to help me with a question that I have
[19:23] <mperkins> ?
[19:23] <wildwind> sere: considering steam i'd choose 32-bit
[19:23] <echoe> You only get one question
[19:24] <mperkins> yep.
[19:24] <echoe> So: yes
[19:24] <wildwind> !ask | mperkins
[19:24] <ActionParsnip> rollz: they were dead wrong http://www.pcupgrade.co.uk/productdetails.asp?productid=11444&categoryid=210
[19:24] <mperkins> trying to install ubuntu on my samsung series 5 ultra and it's not booting from live disk. Would anyone know why?
[19:25] <wildwind> mperkins: UEFI secure boot?
[19:25] <rollz> ActionParship: a friend of mie
[19:25] <BitNova> yea will do that ActionParsnip :)
[19:26] <mperkins> yes that seems to have been a solution that I found needed to be fixed as well but it looks like when I get to the boot options, it shows that I can select "ubuntu" but it just shows the boot option again
[19:27] <ActionParsnip> mperkins: did you MD5 test the ISO you downloaded?
[19:27] <wildwind> !uefi
[19:28] <mperkins> No I did not. , I will try that. Thank you. I'll also try that link Ubottu, thank you.
[19:28] <ActionParsnip> rollz: i suggest you show them the links I sent.
[19:28] <ActionParsnip> !md5 | mperkins
[19:28] <rollz> ActionParship: ill do that
[19:28] <ActionParsnip> mperkins: how did you know the file was complete and consistant?
[19:29] <rollz> !ubottu
[19:30] <sere> ActionParsnip Dell Inspiron M5010 Athlon II P320 2.1 GHz with 3gig is my specs
[19:30] <ThePendulum> floogy: Forwarded the issue to dad, he just said "we'll buy a newe 4TB disk". Case closed :p
[19:30] <wildwind> mperkins: there's some success stories: https://schoolsplay.wordpress.com/2012/11/22/install-ubuntu-linux-on-a-samsung-series-5-ultrabook-with-ssd/
[19:31] <ActionParsnip> sere: id go 32bit if you dont intend to upgrade ram. you'll be fine :-)
[19:32] <sere> ActionParsnip: not anytime soon.. 32bit it is.. ty :)
[19:33] <karlmh1982> phillyj: python-webkit should do the trick for that shouldn't it?
[19:34] <phillyj> karlmh1982: no idea; I don't know python; go to the python channel for more help
[19:34] <Phoenixxl> ThePendulum, back.. so did you fix it?
[19:35] <Dlt_mark^> I would like to ask, Ubuntu 13.04 tcpdump  vlan 9 dosn't work but the tcpdump  vlan 9 on my apple mac  works fine?
[19:35] <ThePendulum> Phoenixxl: Heh, no :( I gave up and installed FreeNAS again, now buying a new HDD to back-up all the data and simply format the other disks
[19:35] <Phoenixxl> ok
[19:35] <kairos> My Linux HDD just failed. GRUB was installed on it. I have a blank HDD and one with Windows currently in. I'm on a live cd. How can I fix this?
[19:35] <Phoenixxl> so now in freenas
[19:35] <Phoenixxl> can you see the volume we created
[19:36] <bean> kairos, what do you mean by failed./
[19:36] <Phoenixxl> called wha&teveritwas
[19:36] <Phoenixxl> you're almost there
[19:36] <kairos> bean: It's old and died, I take it. I can't boot it at all.
[19:36] <Phoenixxl> too bad you didn't install on a hypervisoe
[19:36] <ThePendulum> Phoenixxl: Mind you, I installed FreeNAS completely, not in a VM
[19:37] <ThePendulum> yes
[19:37] <Phoenixxl> it is there?
[19:37] <twig11> I was having trouble ssh-ing to my machine from others in the local network and got some help in here awhile ago. I thought I had it fixed, someone gave me a command to use to flush the firewall and I could ssh in as long as the firewall was off. After turning the firewall on at one point, it suddenly started blocking all traffic in and out for no discernible reason. So I apt-get purged ufw and gufw, rebooted and reinstalled both. I have NOT started ufw yet
[19:37] <twig11>  and I have confirmed that it's not running, yet ssh connections into this machine are timing out again. Do I need to change something in iptables directly, or what?
[19:37] <Phoenixxl> great
[19:37] <bean> ah, okay, kairos. You should just be able to install linux again on the blank CD
[19:37] <ThePendulum> Phoenixxl: And meh I removed that volume, but it was there, yes
[19:37] <bean> err, blank HDD
[19:37] <Phoenixxl> move your files to it
[19:37] <ThePendulum> Hm
[19:37] <jenev> hey
[19:37] <Phoenixxl> thats all you had to do
[19:37] <Phoenixxl> move your fils to it
[19:37] <Phoenixxl> and presto
[19:38] <Phoenixxl> you jumped 99 walls of 100
[19:38] <jenev> i'm trying to get the linux header files installed so I execute the command "sudo apt-get install linux-headers-$(uname -r)"
[19:38] <Phoenixxl> and came back
[19:38] <kairos> bean: I have 2 options in the Ubuntu installation. Overwrite Windows, and Something Else. When I try to select the blank HDD, it says I haven't selected a root file system
[19:39] <wildwind> twig11: show us again ufw, iptables and netatat, as before
[19:39] <bean> kairos, hmm... the blank drive is enabled in your BIOs and shit?
[19:39] <jenev> and it tells me the headers are already installed but when i go to the directory /usr/src/linux-headers-3.5.0-15... all the folders just contain makefiles and no headers
[19:39] <jenev> what;s going on?
[19:39] <jenev> *what's
[19:39] <kairos> bean: Pretty sure
[19:40] <kairos> bean: Actually, I now have another option. Alongside Windows. Will this use the second HDD?
[19:41] <bean> kairos, I think that it may, i'm unsure without seeing it.
[19:41] <twig11> wildwind, better give me the actual commands you need. Remember, ufw is not active, and I'm leery about enabling it without more information, since I knocked myself offline awhile ago without fiddling with any rules that I know of.
[19:41] <bean> kairos, because past that screen there should be an option for what HDD to use.
[19:42] <wildwind> twig11: sudo ufw status
[19:42] <twig11> wildwind, Status: inactive
[19:43] <wildwind> twig11: sudo iptables -L -nv
[19:43] <kairos> bean: http://i.imgur.com/nNiIT27.png
[19:43] <wildwind> twig11: sudo netstat -46Wpnl
[19:44] <bean> kairos, okay, select the other drive if you can :)
[19:44] <twig11> wildwind: http://paste.ubuntu.com/5707825/
[19:44] <kairos> bean: That's the odd part. /dev/sdb is the blank HDD. /dev/sda is the one with Windows on it. However, I can't select the Windows one
[19:45] <bean> kairos, hmmmmm :\ Unsure.
[19:45] <kairos> This is weird
[19:45] <twig11> wildwind, and http://paste.ubuntu.com/5707828/
[19:46] <anonymous> hello any hackkers
[19:46] <kairos> bean: Can I install GRUB on the Windows disk?
[19:46] <wildwind> twig11: seems like iptables rules not flushed
[19:47] <Guest34835> any hackers?
[19:47] <wildwind> twig11: or restored somehow
[19:47] <tones>  !grub
[19:47] <DJones> Guest34835: No, this channel is for Ubuntu support
[19:47] <vooze> I just installed gnome-ubuntu 13.04 But I cant change the window theme (I have tried both Gnome tweak tool and Ubuntu Tweak) I have tried with a alot of different themes, still no luck. Any ideas ??
[19:48] <kairos> tones: Thanks
[19:49] <wildwind> twig11: did'nt you install webmin or something like
[19:49] <phillyj> anyone know if it's possible for both ubuntu and windows systems to use printer connected on a wireless router?
[19:49] <twig11> wildwind, I don't remember it if I did; I don't even know what webmin does
[19:50] <wildwind> twig11: flush iptables again
[19:50] <twig11> wildwind: ok will that mean NO rules when I start ufw?
[19:50] <wildwind> twig11: cat /etc/rc.local
[19:51] <wildwind> twig11: ufw will recreate what it needs
[19:51] <twig11> ok
[19:52] <betrayd> phillyj if it has an ip address most likey it will work
[19:53] <twig11> wildwind: rc.local isn't doing anything. it hasn't been modified from its default state. http://paste.ubuntu.com/5707866/
[19:53] <phillyj> betrayd: ok; currently the ubuntu box is using the printer with the default linux drivers
[19:54] <phillyj> betrayd: do I have to install the HP drivers for this to work?
[19:54] <Phoenixxl> ThePendulum, you can still give it a go you know , you can make a volume on your pool , and move yopur files there. your volume will then easily be mountable on your linux system
[19:54] <wildwind> twig11: ok. reboot and check iptables again
[19:54] <Phoenixxl> ThePendulum, remember for the future when working with zfs , once you make a pool , you have to make volumes as well
[19:55] <twig11> wildwind, I think iptables is flushed; is this what it should look like? http://paste.ubuntu.com/5707871/
[19:55] <Phoenixxl> ThePendulum, anyway , off again
[19:55] <ThePendulum> Phoenixxl: What guarantees that? Since I basically did that the very first time as well?
[19:55] <Phoenixxl> i guarantee it
[19:55] <twig11> wildwind: rebooting
[19:55] <Phoenixxl> ThePendulum, the reason you couldn't access you files is because they were in the abstraction that is the ppool
[19:56] <edoceo> I just upgraded a system from Maverick => Precise and now I want to keep it on LTS; but when I login I get that prompt to 'do-release-upgrade'
[19:56] <Phoenixxl> ThePendulum, creating a pool is just the first step
[19:56] <edoceo> How do I make that only reference the LTS ? /etc/update-manager/release-upgrades points to LTS
[19:56] <Phoenixxl> it is the solution i gave you from the beginning i never believed there was a bug or anything was wrong
[19:56] <Phoenixxl> you would have gotten errors
[19:57] <Phoenixxl> you just did something ... "strange"
[19:57] <betrayd> phillyj look in your synaptic if hplip is installed or installabale
[19:57] <ThePendulum> Phoenixxl: Well I used the web interface... Not much could really go wrong there
[19:57] <phillyj> ok
[19:57] <ThePendulum> Phoenixxl: And at this point I almost have ordered another 4TB disk anyway... hehe
[19:57] <Phoenixxl> you didn't make a volume
[19:57] <Phoenixxl> you stuck stuff in the pool
[19:57] <betrayd> phillyj more info http://hplipopensource.com/hplip-web/downloads.html
[19:57] <ThePendulum> Phoenixxl: The volume is 'shared'?
[19:57] <Phoenixxl> no
[19:57] <Phoenixxl> the pool is "shared"
[19:58] <ThePendulum> It
[19:58] <Phoenixxl> thependulum ill paste mine
[19:58] <ThePendulum> is confusing when the webinterface says "Volume: shared"
[19:58] <tozen> hi all! does iptables included in to ubuntu kernel already or i need to rebuild it? thx
[19:58] <Phoenixxl> ThePendulum, to show
[19:58] <ThePendulum> Phoenixxl: https://dl.dropboxusercontent.com/u/25683105/Pictures/Screenshots/2013052721%3A58%3A45%28freenas-FreeNAS%E2%84%A2FreeNAS-8.0.4-RELEASE-p2-x64%2811367%29-GoogleChrome%29.png
[19:58] <adamLenovo> Easiest way to install Ubuntu? Seperate hard drives, working with a full on UEFI bios.
[19:59] <adamLenovo> Haven't found anything conclusive enough for me on Google.
[19:59] <SatsueiGishi> tozen its already built in
[19:59] <tozen> SatsueiGishi: thx!
[19:59] <MonkeyDust> !iptables
[19:59] <SatsueiGishi> thank you ubottu was going to mention ufw
[19:59] <Phoenixxl> ThePendulum, i cant click that sorry , i can paste text though ill show
[20:00] <ThePendulum> Phoenixxl: Oh yeah :P
[20:00] <Phoenixxl> lets go private messages and bother noone
[20:03] <adamLenovo> Ubuntu / Windows 8 dual boot. UEFI Bios, Seperate Hard Drives.
[20:04] <adamLenovo> Any insight? Should I use the Windows 8 loader?
[20:04] <hurdvm> !uefi | adamLenovo
[20:05] <floogy> sere, did you figure out, if your cpu has got the x86_64 extension?
[20:05] <James_Epp> What is the off-topic channel for ubuntu?
[20:05] <James_Epp> !off-topic
[20:05] <Pete-J> Hello, i am putting togheter an unattended ubuntu install from USB, since some computers i have does not support PXE install, so i am converting an PXE install to an USB stick, i have placed the ks.cfg on the usb stick, the bootloader is linux, but were i read i only find how load the ks file from a server, what append line should i add to read the ks.cfg file on my USB stick? thanks
[20:06] <hurdvm> floogy: all corei5's are 64bit capable
[20:06] <UltimaKR> Hi everybody, I just installed the app pack "OpenJDK" on lubuntu but pages in firefox still say my version of Java is outdated...how do I fix this?
[20:07] <Pete-J> basicly i am asking what line i should use in attend if the ks.cfg is placed on the USB-Stick?
[20:07] <Pete-J> togheter with vmlinuz and initrd
[20:08] <reddeath68> wildwind I am back I am trying to install the linux driver via the install direction and i get an error saying make[1] Entering directory '/usr/src/linux-headers-3.8.0-22-generic' ***No rule to make target 'linux'. stop      any ideas?
[20:10] <neredsenvy> I'm dead in the water I have a 4GB USB stick and Windows 7 ISO how can I make a bootable USB stick ?  I tried dd to burn iso to usb but nothing it took 2h and did nothing.
[20:10] <neredsenvy> How can i burn a ISO to USB on Ubuntu ?
[20:11] <reddeath68> making a portable windows is more difficult then "burning to usb" last i knew
[20:12] <neredsenvy> Portable WIndows ?
[20:12] <wildwind> reddeath68: sorry, i have around zero exp. with building
[20:12] <betrayd> you might get more help in ##windows for that
[20:12] <neredsenvy> Not trying to make a portable windows.
[20:12] <MonkeyDust> !burn | neredsenvy
[20:13] <neredsenvy> I'm simply trying to burn an ISO image to USB
[20:13] <reddeath68> ok wildwind this was so much easier with ndiswrapper until it stopped working...
[20:13] <Random832> neredsenvy: that won't actually allow a computer to boot from it
[20:13] <rypervenche> neredsenvy: unetbootin
[20:13] <Random832> can you unetbootin a windows disk?
[20:13] <betrayd> neredsenvy i used lilli for USB on XP
[20:13] <rypervenche> Nope.
[20:13] <surfdaemon> Random832: dd has worked for me in the past
[20:13] <wildwind> !usb | neredsenvy
[20:13] <UltimaKR> Does anybody know how to get Java to work in Firefox?  It says my version is outdated.
[20:14] <surfdaemon> it's basically magic and unicorns until you put the wrong path
[20:14] <Random832> if just putting an iso image on a usb drive worked, unetbootin wouldn't exist.
[20:16] <wildwind> UltimaKR: haven't you installed Java yet?
[20:16] <UltimaKR> wildwind: I took your advice and installed the OpenJDK from the software center but I still get the same message.
[20:17] <surfdaemon> UltimaKR: icedtea plugin? V:)V
[20:18] <rypervenche> UltimaKR: You'll want icetea :)
[20:19] <reddeath68> ultimakr is memory serves firefox had it disabled by default due to "security bug" with the outdated java i just don't rememb er how to reenable
[20:20] <EmmEight> First day as "Linux Server Admin" tomorrow, any tips?
[20:20] <surfdaemon> EmmEight: beard.
[20:21] <EmmEight> haha
[20:21] <EmmEight> I shaved unfortunately
[20:21] <reddeath68> anyone know why a make file would give the error ***no rule to make target 'linux'. stop.
[20:22] <UltimaKR> wildwind: Did I miss anything you said? My router just reset itself.
[20:23] <xebra> hi, in my home folder I noticed a database file like photos-20130506-0.db ...anyone know what it could be? I didn't use to have it
[20:23] <xebra> what program it might be related to, for example...
[20:23] <rypervenche> Emmanuel_Chanel: Yeah, beard it up!
[20:24] <ServerTechLaptop> Hi, could anyone tell me how to set up a webdav drive on ubuntu 13.04? I tried using manually using davfs and mounting in with /etc/fstab, but it didn't work. The documentation for the online software tells me it's possible to do it graphically through nautilus or something. Any help?
[20:24] <UltimaKR> wildwind: Should I download the newest version for linux from the Java site?
[20:24] <reddeath68> UltimaKR: it was suggested you download icedtea for java other then that you didn't miss anything
[20:25] <wildwind> UltimaKR: haven't you installed Java yet?
[20:25] <UltimaKR> wildwind: I went to the software center and installed "OpenJDK:
[20:25] <A1Recon> Hey I was reading an article on how you can store a script in the Ubuntu One/Dropbox folder and then you can even run the script remotely!! Have u heard anything of the sorts??
[20:27] <surfdaemon> A1Recon: if you are on a machine that syncs the file then that's easy, otherwise you could probably pull the web url and run it?
[20:27] <floogy> A1Recon, you mean you store that script and run it remotely from host one on host 2
[20:27] <TheUsD> can someone point me in a good direction on how to use webmin?
[20:27] <A1Recon> floogy: Yeah something like that!!
[20:28] <Megabyte_netbook> All right. This is driving me nuts.
[20:28] <TheUsD> correct, can someone point me to a good tutorial on webmin**
[20:28] <Megabyte_netbook> How do I reduce the fan noise?
[20:28] <hurdvm> !webmin | TheUsD
[20:28] <floogy> A1Recon, I just can't imagine how that should work.
[20:28] <Megabyte_netbook> How to enable power-saving mode?
[20:29] <TheUsD> Do what? I was just told last night it would be great for my needs.
[20:29] <TheUsD> Just looking to put one of my raids as network drives for my win7 machine to access
[20:29] <hurdvm> TheUsD: nobody in here should have told you to use webmin
[20:30] <hurdvm> !zentyal | TheUsD
[20:30] <floogy> A1Recon, Maybe if remotely a script/daemon is running which waits for new scripts appearing in that dropbox folder to execute it when the new script comes in.
[20:30] <TheUsD> hurdvm: thanks, I'll check that out.
[20:32] <floogy> A1Recon, http://lifehacker.com/5610639/run-actions-on-a-remote-computer-with-dropbox-and-autohotkey
[20:32] <reddeath68> I found my problem the directory had a space in it which was causing problems
[20:33] <floogy> A1Recon, for linux: http://www.dropboxwiki.com/TipsAndTricks/RemoteControl2
[20:37] <Megabyte_netbook> May anyone please help me?
[20:37] <BluesKaj> Megabyte_netbook, just ask your question
[20:37] <Megabyte_netbook> BluesKaj, I need to install something to make Ubuntu go on power-saving mode.
[20:37] <villar> hola buen tarde, que me cuentan eh
[20:38] <webfox> How do I install OpenGL and GLUT ?
[20:38] <villar> ubuntu cassic
[20:38] <Megabyte_netbook> Hello?!
[20:38] <wildwind> !sp | villar
[20:38] <villar> hi
[20:38] <BluesKaj> web for OpenGL , install mesa-utils
[20:39] <BluesKaj> webfox,^
[20:39] <hurdvm> wildwind: es for spanish
[20:39] <wildwind> !es | villar
[20:39] <wildwind> hurdvm: ty
[20:39] <webfox> yep, got it BluesKaj, thank you man!
[20:40] <villar> no importa, estoy en pais y hago lo que mejor, me converga
[20:40] <wildwind> Megabyte_netbook: fancontrol for example
[20:40] <webfox> BluesKaj, I am a newbie at Ubuntu, could you help me showing the entire command please?
[20:40] <BluesKaj> webfox, open a terminal , sudo apt-get install mesa-utils
[20:41] <bean> !patience | Megabyte_netbook
[20:42] <i3luefire> i am trying to make a fast backup of my root partition but i want to exclude /var . is there anything in there that would be necessary. to boot from this backup
[20:42] <webfox> Thank you BluesKaj! ;D
[20:43] <BluesKaj> webfox, as far as GLUT is concered , I have no idea..looks like it's part of several libs
[20:43] <TheUsD> Wildwind: we spoke last night, do you remember?
[20:44] <wildwind> TheUsD: yes
[20:45] <reddeath68> ok no matter what i do the make file screws up when running it even under sudo and in the right directory why is this so hard?
[20:45] <wildwind> TheUsD: how is your server running?
[20:45] <i3luefire> rsync -aAXv /* /path/to/backup/folder --exclude={/dev/*,/proc/*,/sys/*,/tmp/*,/run/*,/mnt/*,/home/*,/var/*,/export/*,/media/*,/lost+found}                  that is the cmd i just ran. and now i need to know if there are any specific subfolders i should backup from /var/
[20:46] <floogy> /var/lib /var/log maybe
[20:46] <wildwind> reddeath68: perhaps it needs some env variables set up
[20:46] <i3luefire> /var/log is important?
[20:47] <floogy> i3luefire, it depends on you
[20:48] <FearTheLord> nooooooooooooooooooo waaaaaaaaaaaaaaaaaaaaaaa
[20:48] <betrayd> ireddeath68 nomrally the readme.configure will tell you whats needed, dependencies could have been left out?
[20:48] <i3luefire> floogy, would it boot and gradually rebuild the logs ? without it?
[20:48] <TonnyNerd> I tried to clean my system from unity and gnome packages, because I use xfce, and I ended up removing a lot of panels from gnome-control-center
[20:48] <TonnyNerd> what do I have to install to have them back?
[20:49] <TonnyNerd> more specifically, the network panel
[20:50] <floogy>  i3luefire, sure, but I don't know which logs other users depend on, e.g. because of legal issues
[20:50] <reddeath68> betrayd: there are no mention of dependencies is it possible 13.04 is just too new to use the old driver which apperently was meant for kernel 2.6?
[20:50] <bean> reddeath68, yeah, thats possible.
[20:51] <i3luefire> floogy, this is my own personal system with no other users
[20:51] <floogy>  Some apps might store some of their data under /var/lib or /var/spool
[20:51] <starbuck> hi guys
[20:51] <reddeath68> that would be just my luck as thats the only driver for this card and ndiswrapper wasnt working right ask wildwind lol
[20:51] <i3luefire> ok
[20:51] <floogy> So, it's up to you if you can omit those logs.
[20:51] <starbuck> how can i read system mail for root (security issues, server reports etc.) in ubuntu 13.04?
[20:52] <i3luefire>  so /var/lib and /var/spool and that is about it then for me
[20:52] <bean> starbuck, type "mail" ? :P
[20:53] <reddeath68> so what should i do as the new driver isnt zsupported and ndiswrapper wasnt working right? try the windows drivers from site as oppossed to the cd?
[20:53] <floogy> i3luefire, it depends on the software you're running. Maybe there are databases under /var/lib that you want to keep.
[20:56] <bean> reddeath68, yeah, you could try that. Does the module just not load currently? or what does it do?
[20:57] <floogy> i3luefire, http://www.pathname.com/fhs/2.2/fhs-5.8.html http://www.pathname.com/fhs/2.2/
[20:58] <i3luefire> floogy, ty
[20:58] <TheUsD> wildwind: it is running smoothly, thanks for all the help yesterday.
[20:58] <TheUsD> wildwind:
[20:58] <i3luefire> that is exactly what i needed
[20:59] <Aww> Any reason why(I guess lightdm) random freezes ?
[20:59] <doomlord__> not having any luck creating bootable disk, usb stick (just got 2 new usb sticks , lol)
[20:59] <Aww> s/random/randomly
[20:59] <bean> doomlord__, from what OS, ubuntu?
[20:59] <doomlord__> the pc in question seems not to want to boot
[20:59] <bean> doomlord__, how old is the pc?
[20:59] <matanya> Aww: what is the your login manager?
[21:00] <doomlord__> from ubuntu yes.. but i got ubuntu onto the target machine already, and yes its a core2-quad .. its a 'spare' machine but i'm using it to ttest a graphics card
[21:00] <TheUsD> wildwind: yesterday after helping me get the static/permissions fixed, you also informed me about webmin for connecting my server to a windows machine. Today I am finding out that webmin is not a good idea and is not suported.
[21:00] <doomlord__> before installing that card in my 'main' pc
[21:00] <Aww> matanya, its stock ubuntu 13.04 Not sure about the login manager
[21:00] <matanya> Aww: it is lightdm
[21:00] <TheUsD> wildwind: instead I was told to use Zentyal, what do you think?
[21:00] <bean> TheUsD, yeah, i don't recommend it, in general you're going to want to use Samba or NFS to connect the two.
[21:01] <matanya> Aww: you can check using ps -ef |grep lightdm
[21:01] <doomlord__> its got ubuntu 12.10 on it; it doesn't seem to want to upgrade itself. also under 12.10 Unity (or other compositing WMs) doesn't work with this graphics card
[21:01] <bean> doomlord__, ah, okay... And it has USB boot enabled int he bios?
[21:01] <doomlord__> yes; just been through bios settings and manual override (press f12...)
[21:01] <Aww> matanya, I'm sure it is. Thats what I restart to get the GUI to work again
[21:01] <TheUsD> bean: I ahve samba installed, but I do not know how to launch it.
[21:01] <rypervenche> What's the Ubuntu version of chkconfig?
[21:01] <doomlord__> it might just be "this pc" being stubborn.. i did make a usb stick for linux mint and install on another spare recently ...
[21:01] <matanya> Aww: any crashes?
[21:02] <TheUsD> I've tried gksudo samba and sudo samba but so far a no go
[21:02] <SPV2008> Hello. Is anyone here?
[21:02] <hurdvm> !samba | TheUsD
[21:02] <matanya> rypervenche: update-rc.d
[21:02] <Aww> Not sure whats it called. um whatever the ctrl-alt-f7 is, is what freezes everything not gui works
[21:02] <matanya> SPV2008: ask
[21:02] <rypervenche> matanya: Thank you.
[21:03] <matanya> rypervenche: FYI: http://askubuntu.com/questions/2263/chkconfig-alternative-for-ubuntu-server
[21:03] <TheUsD> how would you go about uinstalling a program?
[21:03] <SPV2008> I'm running ubuntu but it says that there is no wireless networks there, I'm guessing its a wireless adapter issue. It works fine when i run Kali Linux, Backtrack and Linux Mint, but not with Ubuntu. Any ideas of how to solve this?
[21:03] <matanya> TheUsD: sudo apt-get remove program
[21:03] <MonkeyDust> TheUsD  sudo apt-get remove
[21:03] <MonkeyDust> matanya  was faster :)
[21:04] <TheUsD> All: thank you
[21:04] <matanya> SPV2008: what is your output of lspci?
[21:04] <SPV2008> one moment.
[21:05] <Ari-Yang> TheUsD, or sudo aptitude purge programhere
[21:05] <SPV2008> ah. hold on, its gotta finish doing something.
[21:05] <bean> gross, aptitude.
[21:05] <bean> :P
[21:05] <matanya> SPV2008: Paste it to some pastebin
[21:05] <SPV2008> can't. It has no internet connection
[21:05] <matanya> got you
[21:05] <SPV2008> although....could copy it word for word i suppose.
[21:05] <SPV2008> just write it out.
[21:06] <matanya> so pm it
[21:06] <SPV2008> pm it?
[21:06] <matanya> not to flood the channel
[21:06] <SPV2008> Oh, yeah. ok.
[21:06] <matanya> PM = private message
[21:06] <SPV2008> once its finished, i'll send you the pm.
[21:06] <MonkeyDust> http://paste.ubuntu.com/
[21:06] <SPV2008> I can't paste it, i have no net connection
[21:06] <SPV2008> i'll have to write it all out.
[21:06] <SPV2008> Then do it.
[21:06] <matanya> MonkeyDust: he doesn't have network
[21:07] <SPV2008> :P lol.
[21:07] <FloodBot1> SPV2008: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation.
[21:07] <squaregoldfish> SPV2008: Take a photo of the screen?
[21:07] <doomlord__> bootable cd, bootable dcd .. same, right ? (i just burned a *dvd*) . silly question i know , just checking my assumptions , in the face of reason not working..
[21:07] <SPV2008> hmm, now thats an idea.
[21:07] <matanya> squaregoldfish: you won't be able to see it
[21:07] <TheUsD> is there a GUI option to mounting drives for network use?
[21:08] <SPV2008> hmm. it might be a bit out of focus, true.
[21:08] <SPV2008> but i could try it.
[21:08] <SPV2008> TheUsD, i think you can do that in file explorer.
[21:08] <matanya> TheUsD: you can use nautilus
[21:08] <SPV2008> not 100% sure how, but tinker around and you can probably find it in there. :P
[21:08] <matanya> TheUsD: press CTRL + l and type the address
[21:09] <wildwind> TheUsD: about year and half ago i was in your situation. i had to set up vps with openvpn to connect to. i chose to learn console commands to do my tasks and started to read mans. it has been taking a lot of time at first. but then it became easier i felt more and more assured. now, as you can see, i can even answer some questions :)
[21:09] <SPV2008> how do you private message on here?
[21:10] <TheUsD> I was looking to make the drives on the ubuntu machine avalible to the windows machine.
[21:10] <MonkeyDust> SPV2008  /msg nickname blah
[21:10] <SPV2008> ok, thanks.
[21:10] <TheUsD> wildwind: I understand commands, but I perfer to see what I'm doing as I type it too.
[21:10] <TheUsD> thats why I ask for GUI way too.
[21:10] <matanya> TheUsD: in the long run wildwind is right
[21:11] <matanya> it is much more effective and quick
[21:11] <matanya> SPV2008: next time use a normal client, it would be easier for you
[21:11] <wildwind> TheUsD: Zentyal is OK too
[21:12] <MonkeyDust> http://www.zentyal.org/
[21:18] <wildwind> TheUsD: however from security pov more services on host mean more threats
[21:18] <doomlord__> does anyone here know off hand if unity under 13.04 works on the gt640
[21:18] <gordonjcp> what's a gt640?
[21:19] <doomlord__> nvidia geforce gt640
[21:19] <matanya> dooglus: it should
[21:19] <TheUsD> wildwind: I'm just looking to get my windows machine to see the drives over the network via their public static IP's
[21:20] <wildwind> TheUsD: over the internet or within lan?
[21:21] <KxTwo> I want to run my ps3 controller on my laptop via usb and all the howtos are for bluetooth.
[21:21] <w30> doomlord__, Nvidia has good driver support but they are theirs and they won't share them.  If they ever cause problems you can only call Nvidia
[21:21] <TheUsD> even though its on the same managed switch, I'm going to use the statics as the address.
[21:21] <KxTwo> Anyone know what I need to do or have a link for a USB connect howto
[21:22] <MonkeyDust> doomlord__  in other words: contact nvidia and ask them
[21:22] <doomlord__> well - the card works - gl programs work - its just compositing window managers that dont work. i use gnome fallback or xfwm on this spare machine at the minute
[21:22] <wildwind> TheUsD: static is ok, but public... think twice
[21:22] <doomlord__> on installing, ubuntu told me it unity didnt' support it..
[21:22] <Phoenixxl> TheUsD, i've only ever played with motioninjoy on windows
[21:22] <doomlord__> ... funny thing is though, gl programs themselves work *fine*
[21:23] <Phoenixxl> TheUsD, i don't play games on linux
[21:23] <Multbrelch> hi all -- Q: What is the latest version of compiz for Ubuntu 12.04 64Bit?
[21:23] <w30> doomlord__, Unity is a work in progress to break compiz on every upgrade.
[21:23] <MonkeyDust> !info compiz precise
[21:24] <Multbrelch> MonkeyDust, I mean officially
[21:24] <TheUsD> because I dont have the $ with what I need, I am doing this way. this is my overall goal.
[21:24] <Phoenixxl> you can always use a ppa
[21:24] <doomlord__> heh. in fairness, i like xfwm aswell - but i *really* like global menu, which keeps me wanting unity.
[21:24] <Multbrelch> 0.9.7.12?
[21:24] <MonkeyDust> Multbrelch  look what the info says
[21:24] <Multbrelch> thx ubottu
[21:24] <jost> Hi! I will have multiple internet connections soon. One of them is fast but has limited traffic available, the other one is slow but has unlimited traffic available. To preserve the traffic available at connection 1, I'd like to forbid certain applications (steam, jDownloader) to use  this connections, and only use the second one. Other applications (like browsers) should use the first connection, because it is faster. How would I conf
[21:24] <jost> igure something like that?
[21:25] <doomlord__> i just tried linux mint on another PC, with xfwm setup - its nice... and i've got xfwm on ubuntu 12.04 , again useable but some mismatched themes
[21:25] <Multbrelch> MonkeyDust, just done but I wanted to know the official one. I had a ppa version which I replaced. I wanted to be sure
[21:25] <Multbrelch> Thx, MonkeyDust
[21:25] <wildwind> doomlord__: unity may check driver for some specific feature it uses for effects, and decide on that. other programs may not need it
[21:25] <MonkeyDust> Multbrelch  glad to help
[21:25] <doomlord__> i could stick with a crazy setup, 2 pcs side by side, one ssh-ing into the others filesystem, synergy keyboard/mouse sharing..
[21:26] <Multbrelch> So, 0.9.7.12 is the latest official one ...
[21:26] <MonkeyDust> Multbrelch  supported on Precise, yes
[21:26] <Multbrelch> k
[21:26] <Multbrelch> So, I have done my work correctly :)
[21:26] <doomlord__> my "main" pc has a graphics card with only 2 monitor outputs (geforce 220); i'm after  4 monitors (and ability to use a screen further away, i.e. infront of treadmill)
[21:26] <TheUsD> I want to just make this linix box a DAS server for my windows machine, however I cant afford the SAS cards I need. So instead I installed linux and going to make it my mail server and also use it to store data. As I have a FTP windows server thats fitting all my needs, I would like the windows machine to have access to the drives on the linux machine.
[21:27] <Phoenixxl> jost, i am in the same situation as you
[21:27] <w30> doomlord__, I am like an orphan looking for a new home since Unity; I have jumped to gnome2, gnome with tweaks, xfwm, and now messing with enlightenment .ha
[21:27] <surfdaemon> doomlord__: I've considered getting a stationary bike to put in front of the desk, If I can get a proper stand for keyboard and mouse it should be great.
[21:27] <gordonjcp> TheUsD: sounds like you want samba then
[21:27] <TheUsD> That way I can point the FTP server to use the linux drives as more storage space.
[21:28] <Phoenixxl> jost, what I did was , I installed  virtual machine
[21:28] <TheUsD> Is Samba a GUI interface or strickly terminal?
[21:28] <Phoenixxl> and used that virtual machine to connect to the second internet connection
[21:28] <doomlord__> w30, of those , xfwm is my favourite - i like the few extra features it has eg mouse-wheel desktop sharing, and a 'stick window' icon.
[21:28] <shadykhan> my control enter isnt auto completing on firefox or chromium any idea?
[21:28] <surfdaemon> TheUsD: iirc there is a gui manager should you prefer that.
[21:28] <Phoenixxl> jost, then on that virtual computer , I used KVM on ubuntu at first ,
[21:28] <w30> doomlord__, I love ubuntu though, it basically is the best in my book
[21:28] <th0r> Theusd: swat for gui
[21:28] <doomlord__> its just GlobalMenu that keeps me in unity... i have always utterly despised wintows style menu bars
[21:29] <doomlord__> i grew up on the Amiga, which had the menu in *the right place*
[21:29] <Phoenixxl> jost, I installed a socks proxy , and various clients
[21:29] <jost> Phoenixxl: thanks, that is a good idea - I already have some VMs configured, so I'll just use  one of them
[21:30] <TheUsD> As I appreciate everyones feedback and help, please keep in mind I am a 3 day old linux user. Been a windows user my whole life and left commands behind with windows 3.11 enhanced :-p
[21:30] <Phoenixxl> jost, i can connect using the second internet connection with a simple command on chrome
[21:30] <doomlord__> i also have a displaylink usb monitor dongle here... but it only nearly worked, and i hear it needs to reduce the bit-depth to 16
[21:31] <wildwind> TheUsD: you can just run ftp server on linux
[21:31] <wildwind> TheUsD: as an option
[21:31] <MonkeyDust> TheUsD  https://help.ubuntu.com/community/SwitchingToUbuntu/FromWindows
[21:33] <shadykhan> can someone help me with this really annoying problem?
[21:34] <MonkeyDust> shadykhan  let's hear it!
[21:34] <shadykhan> MonkeyDust, so i just installed 13.04 and in neither browser firefox/chromium control enter doesnt auto complete the .com for me
[21:35] <wildwind> TheUsD: if storage is all that you want from linux box, try FreeNAS or NAS4Free distros. they have everything built-in (including ftp) and working out of the box. and a nice web UI
[21:36] <wildwind> TheUsD: including Samba, iSCSI, bit-torrent ant other ways to share disks and files
[21:36] <TheUsD> wildwind: can the linux FTP compare to something like this www.wftpserver.com/comparison.htm
[21:36] <Phoenixxl> jost, strat chrome with --proxy-server="socks5://Virtualmachine:1080" --proxy-bypass-list="192.168.1.0/24"
[21:36] <Phoenixxl> jost, if your local subnet is 192.168.1
[21:37] <Phoenixxl> jost, I have the same setup for VPN's also , a virtual compuer per country
[21:37] <Phoenixxl> jost, they use very little cpu time ? I use ubuntu server + shorewall.. they manage on 200 meg of mem
[21:37] <TheUsD> wildwind: you should try the demo they have. Its a very simple but powerful program.
[21:38] <jost> Phoenixxl: actually, just running the apps in a VM and allow the VM to only use the correct connection will suffice for now :-)
[21:38] <Phoenixxl> jost, for socks I use dante , and also map a few ports using SOCAT
[21:39] <Phoenixxl> jost, when you eventually get to that , you never know , youll have somewhere to start looking
[21:39] <MonkeyDust> shadykhan  did not find it in system settings, or in chromium settings, so try logout and back in
[21:39] <shadykhan> MonkeyDust,  logged out and restarted multiple times
[21:39] <voxadam> I am trying to help a friend mount a HFS+ formated hard drive connected via USB. Read-only is fine, he's just trying to rescue some files from a drive out of a dead MacBook. How do I determine what /dev/ device the USB is drive?
[21:39] <robertzaccour> Howdy y'all. Happy Memorial Day :)
[21:41] <Phoenixxl> What's that ?
[21:41] <Phoenixxl> Is that some local thing?
[21:42] <bumbar> i was fiddling with chattr and now i can' change rights on a folder with chmod/chown
[21:42] <Phoenixxl> Like "My secretary has big bazonka's day" ?
[21:42] <MonkeyDust> Phoenixxl  it's american, on the last monday of may
[21:42] <voxadam> I know the mount command "sudo mount -r -t hfsplus /dev/*something* /media/" I just need to determine what the *something* is.
[21:42] <w30> less /etc/mtab
[21:42] <echoe> Q: every so often, my laptop freezes but the mouse pointer is movable and I need to restart. What does this mean?
[21:43] <voxadam> w30: Are you talking to me?
[21:43] <Phoenixxl> Ok .. a special holiday for the special 4% :P
[21:43] <BluesKaj> voxadam, sudo fdisk -l should give the sdX
[21:43] <Phoenixxl> I find the "invite an indian and make him eat turkey" holiday great as well
[21:43] <MonkeyDust> echoe  what ubuntu version?
[21:44] <robertzaccour> Phoenixxl, Memorial Day is a day in which we remember and celebrate the sacrifices of the service of our veterans.
[21:44] <echoe> 13.04
[21:44] <w30> voxadam, works for me
[21:44] <wildwind> voxadam: or use Disks utility
[21:44] <echoe> New, only a few programs.
[21:44] <BluesKaj> voxadam, "something=sdX
[21:44] <Phoenixxl> now to just get them a job when they get back
[21:44] <Phoenixxl> and computerize their claims forms
[21:44] <wildwind> !ot | robertzaccour
[21:44] <voxadam> w30: Doesn't /etc/mtab only contain mounted file systems? I'm trying to figure out what sdX the unmounted drive is so that I can pass it to the mount command.
[21:45] <betrayd> voxadam tried dmesg | grep sd ?
[21:46] <BluesKaj> voxadam, try sudo blkid
[21:46] <Phoenixxl> echoe, next time that happens , ssh to the thing if you have another computer
[21:46] <MonkeyDust> blkid does not rquire sudo
[21:46] <Phoenixxl> echoe, and tail the syslog or something..
[21:46] <w30> voxadam, my ubuntu automounts usb drives  so ...
[21:46] <echoe> Luckily, I don't really. Bleh. Maybe will grab a box.
[21:47] <Phoenixxl> echoe, check the syslog at the very least
[21:47] <robertzaccour> wildwind, I simply said Happy Memorial Day and gave a very brief explanation of what we remember and celebrate. Its not really a discussion. And as for veterans like myself, nobody embraces the importance in their hearts more than we do. That's all I will say on the subject matter. Now good day to you and God bless.
[21:47] <BluesKaj> MonkeyDust, try it without sudo
[21:47] <Phoenixxl> echoe, look for dumps and things that look like cpu registry content..
[21:48] <elichev> anyone online?>
[21:48] <MonkeyDust> BluesKaj  no difference, with or without sudo
[21:48] <Phoenixxl> echoe, things that go inside out look very distinct
[21:48] <bekks> elichev: Several hundreds, as "/names" reveal.
[21:48] <BluesKaj> MonkeyDust, there is here , blkid ,just returns to the prompt
[21:49] <elichev> anyone know where i can get code or port to ubuntu touch (for android)
[21:49] <elichev> im interested in make a custom rom for ma gs3
[21:49] <wildwind> voxadam: sudo parted -l
[21:49] <OerHeks> !touch
[21:49] <MonkeyDust> !touch | elichev start here
[21:52] <KxTwo> for the love of god does anyone know how to get a ps3 controller to work on ubuntu.  I have qtsixa and it sees it but doesnt do anything
[21:53] <Phoenixxl> KxTwo, did you try qtsixa
[21:53] <KxTwo> for the love of god does anyone know how to get a ps3 controller to work on ubuntu.  I have "qtsixa"  and it sees it but doesnt do anything
[21:54] <KxTwo> ...
[21:54] <Phoenixxl> KxTwo, oh
[21:54] <KxTwo> it sees it, so does pcsx but it doesnt DO anthing
[21:54] <KxTwo> my controller is just blinking
[21:55] <Phoenixxl> it's blinking !
[21:55] <Phoenixxl> you can use it as a flashlight
[21:55] <KxTwo> uh
[21:55] <KxTwo> yah
[21:55] <KxTwo> so useful
[21:56] <Phoenixxl> saying it does "nothing" is quite pessimistic ..
[21:56] <betrayd> is it blinking green?
[21:56] <MonkeyDust> KxTwo  this looks the most useful https://www.youtube.com/watch?v=C2yKiMxisM0
[21:56] <echoe> Dmesg says "recovery required on readonly filesystem" on boot
[21:56] <KxTwo> its doing the all 4 light blinking like it does while waiting to be paired to the ps3
[21:56] <elichev> last question.. btw thanks for porting info.  i got windows 8 and a usb with ubunto.iso  how can i install ubuntu on my windows 8 cuz windows installer dsnt work with win 8
[21:56] <Phoenixxl> in "motioninjoy" there was some kind of handshake process
[21:57] <Phoenixxl> it was quite the thing to get the pos to work
[21:57] <KxTwo> that video doesnt help since I am not using bluetooth
[21:57] <Phoenixxl> i can only imagine in ubuntu..
[21:58] <KxTwo> qtsixa should get it to work via usb too but doesnt
[21:58] <MonkeyDust> KxTwo  only 10 people in ##sony, for PS3 related things, looks like you're out of luck
[22:01] <Phoenixxl> I am looking ta some thread here from someone saying he just plugged it in and it worked
[22:01] <Phoenixxl> but the caveat is in general the sensitivity is too great
[22:01] <Phoenixxl> that it gets messed up
[22:01] <Phoenixxl> i'm sure you read it ?
[22:01] <Phoenixxl> http://ubuntuforums.org/showthread.php?t=1745206
[22:02] <FrankieJ> if you do aptitude update, would i also gotta do apt-get update?
[22:03] <Phoenixxl> FrankieJ, no
[22:03] <Phoenixxl> FrankieJ, these days you can use either or mixed
[22:03] <Phoenixxl> FrankieJ, it wasn't always so
[22:04] <Phoenixxl> mostly it will be fine
[22:04] <Phoenixxl> i would however say you should stick to 1
[22:05] <Phoenixxl> FrankieJ, i am somewhat under the impression aptitude is stricter on dependencies than apt-get
[22:06] <midnightmagic> Has anyone here gotten a KVM-friendly version of qemu-1.5.0 running uner 12.04?  looks like a manual install is pretty involved.
[22:07] <FrankieJ> hmmm, thx for the input Phoenixxl
[22:08] <KxTwo> only combining sony and ubuntu together would you get a scenario where bluetooth is easier than usb
[22:09] <Phoenixxl> midnightmagic, when i installed the kvm environment i had the possibility to choose qemu or kvm as emulator
[22:09] <Phoenixxl> midnightmagic, kvm machines were much smoother
[22:10] <betrayd> KxTwo dont you need to press to clear all them green lights
[22:10] <midnightmagic> Phoenixxl: For qemu-1.5.0?  Can you hint me a URL or source I can follow? :)   or did you ./configure  manually?
[22:10] <linuxthefish> hey, can i make the unity sidebar icons enlarge when i hover my mouse over them?
[22:11] <midnightmagic> Phoenixxl: Yes, kvm are definitely much smoother. That's actually what I'm trying to enable. I got bit by this bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=653473 (I want a bunch of BSD vms)
[22:11] <Phoenixxl> midnightmagic, ill check the version i didnt check
[22:11] <midnightmagic> Phoenixxl: Thank you.
[22:12] <KxTwo> how sad is it that its easier to use an xbox controller lol
[22:14] <Phoenixxl> midnightmagic, not 1.5 is there a reason why you need 1.5 ?
[22:15] <Phoenixxl> midnightmagic, Except for serious memory management i was able to do most things
[22:15] <Phoenixxl> midnightmagic, even ballooning
[22:15] <midnightmagic> Phoenixxl: Yeah, I need this bugfix: http://thread.gmane.org/gmane.comp.emulators.qemu/130695  But I guess my next option is to just manually apply the patch with an apt-get source.
[22:15] <Phoenixxl> midnightmagic, i used MOM for ballooning
[22:15] <Phoenixxl> midnightmagic, let me check that bug
[22:16] <catordogwhoknows> hi, I want to "trick" my browser into using file://local.js when it looks for http://example.com/foo.js .  How can I do this without using a proxy like privoxy?  I just want to do this for this specific file
[22:16] <robottinosino> hi, i am using 12.04-LTS w/ a PowerPC (ppc) Mac Mini, all works fine, even WiFi after firmware install.. but there is no /etc/default/grub.. to make it CLI-only?
[22:16] <rmobenchain> is it possible to unmount a partition via the terminal?
[22:17] <matanya> yes rmobenchain
[22:17] <matanya> umount /name/of/partition
[22:17] <wildwind> catordogwhoknows: Greasemonkey maybe?
[22:17] <robottinosino> i am going to try apt-get install grub2 and see if that helps..
[22:18] <Phoenixxl> midnightmagic, which part of those issues affects you ?
[22:18] <matanya> robottinosino: grub2 should be the default
[22:18] <Phoenixxl> midnightmagic, if you are worries about iscsi boot , i used iPXE and it worked fine
[22:18] <rmobenchain> mantanya:  I tried sudo umount /dev/sdf1 and got umount: /cdrom: device is busy.  (In some cases useful info about processes that use.  the device is found by lsof(8) or fuser(1))
[22:19] <catordogwhoknows> wildwind: I think greasemonkey would still load the remote js file and then I'd have to do something to modify it later with javascript -- it's not exactly what I want
[22:19] <linuxthefish> nothing at all for Unity magnification when hovering over icons? :(
[22:19] <rmobenchain> I'm using a USB version of the LIVE CD ... I was under the impression using this would allow me to unmount the parition
[22:19] <linuxthefish> i thought linux was about customisation!
[22:19] <matanya> rmobenchain: it is a cddrive, not a partition
[22:19] <rmobenchain> arrggh.  I see that now
[22:20] <rmobenchain> all I'm really wanting to do is format or create a new parition to try and install ubuntu.  I've tried using gparted and read so many threads I've gone blind.  really really could use some help here
[22:20] <wildwind> catordogwhoknows: maybe it's possible to rewrith script url, not sure
[22:20] <wildwind> *rewrite
[22:21] <catordogwhoknows> wildwind: how?
[22:21] <robottinosino> matanya: thank you for answering, i appreciate it. grub2 was not even on there.
[22:21] <Phoenixxl> midnightmagic, aptitude install ubuntu-virt-server
[22:21] <Phoenixxl> midnightmagic, aptitude install ubuntu-virt-mgmt
[22:21] <Phoenixxl> midnightmagic, in that order
[22:21] <wildwind> catordogwhoknows: don't know, need to read docs :)
[22:22] <catordogwhoknows> wildwind: i can't find that functionality
[22:22] <matanya> robottinosino: so you won't have /etc/default/grub
[22:22] <wildwind> catordogwhoknows: ok just a thought
[22:22] <catordogwhoknows> hi, I want to "trick" my browser into using file://local.js when it looks for http://example.com/foo.js .  How can I do this without using a proxy like privoxy?  I just want to do this for this specific file
[22:23] <rmobenchain> or can I erase everything on the hard drive while I'm here on the USB LIVE CD and start from scratch some how?
[22:24] <matanya> rmobenchain: you can, why would you want to do that?
[22:24] <wildwind> rmobenchain: sure, with gparted
[22:26] <rmobenchain> mantanya:  everytime I try to install Ubuntu, I get a 'input/output error read on /dev/sdaf' message.  wouldn't wiping everything clean get rid of that?
[22:26] <catordogwhoknows> hi, I want to "trick" my browser into using file://local.js when it looks for http://example.com/foo.js .  How can I do this without using a proxy like privoxy?  I just want to do this for this specific file
[22:26] <robottinosino> matanya: i do after installing grub but switching from yaboot to grub2 looks non-trivial (at least for me)
[22:26] <midnightmagic> Phoenixxl: In specific, I'm seeing the aligned write problem, error booting NetBSD 6.1 x86, with pci_make_tag: bad request
[22:27] <matanya> robottinosino: it is not so trivial, but doable
[22:27] <rmobenchain> wildwind: how do I use  gparted to do that?  anytime I go near /dev/sdaf1, it stops me
[22:27] <PyGuy> Hey guys. Can someone help me get my Sound Blaster ZX to work in Ubuntu 12.04?
[22:28] <Phoenixxl> midnightmagic, have you considered installing IET iscsitarget , then share your storage on that .
[22:28] <Phoenixxl> midnightmagic, it doesn't use a virtual controller
[22:28] <midnightmagic> Phoenixxl: I've got a raw lvm volume group that the installer (at least) managed to successfully install to.
[22:28] <midnightmagic> Phoenixxl: So I know it *can* work at any rate.
[22:28] <wildwind> rmobenchain: what is sdaf1?
[22:29] <matanya> his cdrom
[22:29] <rmobenchain> sdf1 rather.  sorry
[22:29] <rmobenchain> *smacks my typist* sorry
[22:30] <Phoenixxl> midnightmagic, i had to stop using KvM , though it's the best option atm imo
[22:30] <midnightmagic> Phoenixxl: What are you using now? virtualbox or something?
[22:30] <Phoenixxl> midnightmagic, memory just isn't managed as it should
[22:30] <PyGuy> I am having trouble with my Sound Blaster ZX card. It's detected, but no sound comes out
[22:31] <ActionParsnip> pyguy: creative can be a pain to get nice. totally not worth it
[22:31] <Thete> What's a good SFTP client for ubuntu?
[22:31] <Thete> Filezilla?
[22:32] <PyGuy> Yeah, but I spent $150 on the card, so I hope to get it working one way or another
[22:32] <robottinosino> matanya: my skills are trivial, put it that way :) i updated the  /etc/yaboot.conf and rebooted.. is there an equiv. to update-grub for yaboot?
[22:32] <wildwind> rmobenchain: can you select partition in gparted, right-click, remove it?
[22:32] <ActionParsnip> thete: nautilus can connect to sftp
[22:32] <ActionParsnip> pyguy: pretty cheap
[22:32] <Thete> ActionParsnip, oh cool, thanks :)
[22:32] <rmobenchain> wildwind: lemme try real quick
[22:32] <robottinosino> sudo ybin -v i suppose :(
[22:33] <matanya> robottinosino: not very familiar with yaboot
[22:33] <PyGuy> Well, I need some help regardless.
[22:33] <rmobenchain> I can't select the delete option
[22:33] <robottinosino> matanya: no problem, mate. thank you for paying attention anyway. :)
[22:33] <matanya> :)
[22:33] <ActionParsnip> pyguy: what is the output of: wget -O alsa-info.sh http://www.alsa-project.org/alsa-info.sh && chmod +x ./alsa-info.sh && ./alsa-info.sh --upload
[22:33] <matanya> Thete: yes, that is good
[22:34] <ActionParsnip> thete: unlike the windows file manager, nautilus actually has some decent features
[22:34] <rmobenchain> wildwind: only options I have when right clicking are 'unmount, manage flags, and information'
[22:34] <PyGuy> http://www.alsa-project.org/db/?f=02b03f6da21ec0656b8ed41e9186d2604bb5b26f
[22:34] <ActionParsnip> pyguy: you are using a 3rd party kernel, which we cannot support
[22:35] <wildwind> rmobenchain: ok, you should unmount before any other action on it
[22:35] <matanya> Thete: you can use nautilus using : CTRL + l and type sftp://connectionadress
[22:35] <Thete> Does the PPC version of Ubuntu use yaboot?
[22:35] <PyGuy> Third party? I'm using the raring kernel
[22:35] <rmobenchain> wildwind: tried to unmount, and got 'umount: /cdrom: device is busy.         (In some cases useful info about processes that use          the device is found by lsof(8) or fuser(1))'
[22:35] <ActionParsnip> pyguy: yes in Precise
[22:35] <PyGuy> Alrighty, lemme switch back
[22:36] <ActionParsnip> pyguy: using Raring kernel in Raring is fine
[22:36] <Thete> matanya, Works, great, thanks :)
[22:37] <wildwind> rmobenchain: you've selected wrong partition.
[22:37] <evilytwisted> hi! would any of you know of a auto tune or voice changer that affects in real time for skype or any other recording device?
[22:37] <rmobenchain> wildwind: that is the only one that shows up on gparted
[22:37] <wildwind> rmobenchain: 'hard drive' you said
[22:37] <betrayd> for that ransom message
[22:37] <wildwind> rmobenchain: hmm
[22:38] <rmobenchain> wildwind: that is why I want to delete everything I can, and start from scratch
[22:38] <ActionParsnip> pyguy: do you use the onboard sound?
[22:38] <matanya> np Thete
[22:38] <robottinosino> i would like to get rid of network-manager and configure my home-server's wifi "statically", could anybody help, please?
[22:38] <robottinosino> i have worked through a tutorial that uses wpa supplicant but broke things and just had to reinstall
[22:38] <wildwind> looks like you're running gparted not from root
[22:39] <robottinosino> now i am back to a fresh install, with wifi working using network-manager
[22:39] <ActionParsnip> robottinosino: why not use network manager?
[22:39] <matanya> robottinosino: if you remove nm and brake things you won't have network to fix it
[22:39] <evilytwisted> ActionParsnip:  would you know of a software that acts like a autotune or voice changer in real time?  for recording softwares like skype or such?
[22:40] <robottinosino> because nm sometimes fails to reconnect if the network gets flaky
[22:40] <robottinosino> ActionParsnip: i hope this answers your question.
[22:40] <PyGuy> ActionParsnip: http://www.alsa-project.org/db/?f=cc91987e4eb5a2123b93d12050ffa35b71a6a0fb
[22:40] <matanya> robottinosino: it won't help
[22:40] <rmobenchain> wildwind: on gparted I now have unallocated partition showing 372.61 GiB free
[22:40] <ActionParsnip> evilytwisted: i dont do any sound production at all, sorry
[22:40] <robottinosino> matanya: what will not help?
[22:40] <evilytwisted> i know you dont im just wondering if you know of any
[22:40] <matanya> robottinosino: removing the nm
[22:40] <ActionParsnip> pyguy: still the raring kernel in precise.
[22:41] <robottinosino> matanya: oh. :( my plan is entirely wrong then
[22:41] <ActionParsnip> evilytwisted no idea at all. sorry
[22:41] <wildwind> rmobenchain: oh, what device is selected in combobox on top right
[22:41] <PyGuy> How to I go back? I deleted the kernel in Synaptic
[22:41] <ActionParsnip> pyguy: try rebooting.
[22:41] <matanya> robottinosino: better fix the issue, than remove the software
[22:41] <PyGuy> ActionParsnip: I did
[22:41] <ActionParsnip> pyguy: also disable the onboard soundcard
[22:41] <ActionParsnip> pyguy: im asuming you dont use it
[22:41] <wildwind> rmobenchain: that looks like your hdd
[22:42] <wildwind> rmobenchain: if it all is unallocated then your 'erase' mission is complete
[22:42] <ActionParsnip> pyguy: why are you adding kernels which are not intended for your release
[22:42] <rmobenchain> wildwind: I have /dev/sda showing 372.61 GiB and /dev/sdf showing 1.80 GiB
[22:43] <PyGuy> ActionParsnip: Because the default kernel doesn't detect my sound card
[22:43] <wildwind> rmobenchain: sdf is your liveusb i suppose
[22:43] <ActionParsnip> pyguy: the only kernels supported for Precise are the ones from the repos which are made for that release
[22:43] <rmobenchain> wildwind: and sda is my root? (isn't that what it's called?"
[22:44] <rmobenchain> errr boot I mean
[22:44] <rmobenchain> or something
[22:44] <matanya> PyGuy: better fixing your kernel than using the wrong one
[22:44] <Phoenixxl> pyGuy which version of precise ?
[22:44] <wildwind> rmobenchain: it's your hard disk
[22:45] <PyGuy> Phoenixxl: 12.04.2
[22:45] <rmobenchain> and you think sdf is my usb?
[22:45] <Phoenixxl> PyGuy, if you install with 12.04.1 you get a 3.2 kernel if you install with 12.04.2 you get a 3.5
[22:45] <Phoenixxl> PyGuy, it's been the silliest idea ubuntu team ever had imo ..
[22:45] <ActionParsnip> pyguy: install Raring and you will have the 3.8 kernel by default
[22:45] <wildwind> rmobenchain: there will be 'root' after installing something
[22:45] <Phoenixxl> PyGuy, since you keep upgrading in the same direction , you don't go from 3.2 to 3.5
[22:46] <ActionParsnip> phoenixxl: you can install the backport and get 3.5
[22:46] <rmobenchain> wildwind:  so I shoudl be good with my install now eh?  I'm hoping *crossing fingers*
[22:46] <wildwind> rmobenchain: gl
[22:46] <Phoenixxl> ActionParsnip, yes , but in principle if ind it very meh
[22:46] <ActionParsnip> phoenixxl: why? as long as the kernel works, who cares
[22:47] <rmobenchain> thanks wildwind.  appreciate the help.  will be back if it fails.  LOL
[22:47] <Phoenixxl> ActionParsnip, the kernel working is not the argument
[22:47] <ActionParsnip> phoenixxl: whats new in the 3.5 kernel (without searching the web)?
[22:47] <Phoenixxl> ActionParsnip, let's not simplify it to that
[22:48] <Phoenixxl> ActionParsnip, 3.5 is a "dead end" kernel
[22:48] <ActionParsnip> phoenixxl: thats what it is though. if you dont benefit (or even know) what is different in the 3.5 kerenl, why or how is it 'meh'?
[22:49] <Phoenixxl> ActionParsnip, imo , and taking quite a few things into consideration , people shouldn't be suckered into a 3.5 kernel
[22:50] <Phoenixxl> ActionParsnip, it's not the end of the world , indeed .. But when I want stable , I prefer stable "thats being worked on"
[22:51] <matanya> Phoenixxl: want stable, use debian :)
[22:51] <Phoenixxl> matanya, yes..
[22:51] <Phoenixxl> matanya, yes but :) .. i like ubuntu ease of use
[22:51] <ActionParsnip> phonixxl: the devs will push an upgrade when it is good. dont worry about version numbers too much
[22:52] <Phoenixxl> ActionParsnip, i am not "worrying"
[22:52] <Phoenixxl> ActionParsnip, I am speaking from experience
[22:53] <ActionParsnip> phoenixxl: same, as long as the kernel works its fine
[22:53]  * Dr_willis wonders if the HDMI fixs have finally made it into the 13.04  repos kernels.
[22:53] <rmobenchain> ugh. am back
[22:54] <Phoenixxl> ActionParsnip, lol
[22:54] <rmobenchain> am still getting a 'input/output error read on /dev/sda' message during install.  how do i correct this?
[22:54] <karlmhaines> flash only shows on half the screen with all crazy colors.. firefox with the newest firefox/flash installed
[22:54] <karlmhaines> how cab i fix this
[22:54] <ActionParsnip> mobenchain: sounds like a bad drive
[22:55] <Dr_willis> karlmhaines,  common 'fix' is to disable hardware acceleration in the flash player menus/settings
[22:55] <Killcraft> Anyone know how to install cairo-compmgr in ubuntu?
[22:56] <ActionParsnip> kalhaines: what is the output of: lsb_release -a; uname -a; dpkg -l | egrep 'flash|gnash|swf|spark'
[22:56] <Phoenixxl> ActionParsnip, I'm sorry , I don't have a denigrating attitude towards users. Neither do I think them simpletons. A cos is a Cow. I am sam. Green eggs and ham. Sam I am.
[22:56] <ActionParsnip> karlhaines: please use a pastebin for the command above
[22:57] <ActionParsnip> phoenixxl: me neither. i dont see how thats relevant. Ive moved on...
[22:57] <Phoenixxl> ActionParsnip, I do not stand above such things.
[23:00] <rmobenchain> when I do fdisk -l, nothing lists
[23:00] <karlmhaines> ActionParsnip: http://pastebin.com/EL7EsAyZ
[23:00] <ActionParsnip> rmobenchain: it needs sudo
[23:01] <ActionParsnip> karlmhaines: uninstall those packages then install only adobe-flashplugin
[23:03] <Guest40090> hello
[23:04] <Guest40090> I need help with changing folder permissions for a program
[23:04] <Dr_willis> !permissions
[23:05] <Dr_willis> Unless you want to give us more details. ;)
[23:05] <Guest40090> i do!
[23:05] <Guest40090> I want to create a directory from the statisical program R
[23:05] <Guest40090> but I get the error:
[23:06] <Guest40090> In dir.create("D") : cannot create dir 'D', reason 'Permission denied'
[23:06] <midnightmagic> Phoenixxl: Applying the patch via quilt and rebuilding the .deb manually has corrected the issue on my 12.04.2 system. I wonder what the chances of getting the patch backported are..
[23:07] <Guest40090> I am relatively new to ubuntu
[23:07] <Spirox> !seen a
[23:07] <Dr_willis> Guest40090,  the directory that 'D' is in - most likely has the incorrect permissions to allow your user sccess
[23:07] <Phoenixxl> midnightmagic, is it in 12.10 13.04 ?
[23:07] <Guest40090> the command in R is: dir.create("D")
[23:07] <Guest40090> working directory is /home
[23:07] <Dr_willis> Guest40090,  you may want to use the full path. NOT /home/ which is NOT the same as /home/username/
[23:07] <midnightmagic> Phoenixxl: Lemme check, I'll give you a ful version string. DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS"
[23:08] <Dr_willis> a users 'home' is /home/theusersname
[23:08] <Phoenixxl> midnightmagic, or maybe there's a ppa
[23:08] <midnightmagic> Phoenixxl: Oh, sorry I misread your question.
[23:08] <Phoenixxl> midnightmagic, having to patch something up every time your system farts is a real pain
[23:08] <midnightmagic> Phoenixxl: I'm not sure where else it exists. I looked for a PPA but did not find any.. so far.
[23:08] <Guest40090> awesome!
[23:08] <midnightmagic> Phoenixxl: I don't mind it. I'm from BSD-land, that's normal there.
[23:08] <Guest40090> now can you break it down why the username is required?
[23:09] <bazzer> anybody familiar with setting up Maas??
[23:09] <Phoenixxl> midnightmagic, i live everywhere :)
[23:09] <tones> what does ppa stand for?
[23:09] <Phoenixxl> midnightmagic, not excluding a still running AS40 at work
[23:09] <Phoenixxl> AS400
[23:09] <Dr_willis> Guest40090,  when in doubt give the FULL path..  you said '/home/ which a user does not have rights to.. they have rghts to their "home" which is /home/theusersname
[23:09] <Guest40090> ah ha.
[23:09] <midnightmagic> Phoenixxl: Yikes. The weird native filesystem on those is weird.
[23:10] <Dr_willis> $home = system variable that expands to /home/theusername   also.
[23:10] <tones> !ppa
[23:10] <Phoenixxl> midnightmagic, if you understand absoluytely eveything is a database you're fine
[23:10] <Dr_willis> at least i think its $home
[23:10] <midnightmagic> Phoenixxl: I have an Amiga 3000 sitting on my desk that still boots, and a C=64 in original styrofoam packaging. Does that count?
[23:10] <Guest40090> thank you all.
[23:10] <Phoenixxl> midnightmagic, I had a 6 node BBS running Amiexpress !
[23:10] <bazzer> i have a fresh 12.04.2 server installed and the maas-import-isos fails to import the emphemerals every single time with a failure to find /var/lib/tftpboot (which as i understand it tftpd-hpa isn't required due to the phython twisted being installed) and apparmor is throwing errors in syslog with DENIED trying to mkdir /var/lib/tftpboot
[23:11] <Guest40090> i will return soon i imagine.
[23:11] <Dr_willis> midnightmagic,  i got rid of all my old stuff like that. when a tree took out the garrage storeing them all. ;(
[23:11] <midnightmagic> Phoenixxl: Hah, I had a 1-node Max's BBS.
[23:11] <Phoenixxl> midnightmagic, i still have the USRobotics Dual standards in the attic
[23:11] <midnightmagic> Dr_willis: Hopefully nobody was hurt.
[23:11] <Nick56x> Hello, I have a question. Every now and then on either of my browsers (Chrominum and firefox) I will lose connection randomly. But, in the software centre, or anything else, everything is fine. And, I don';t understand why it is doing that.
[23:11] <Dr_willis> midnightmagic,  the huge stacks of junk held up the roof  from hitting the car. ;P
[23:12] <Phoenixxl> midnightmagic, growi ng up with an "underdog" system you loves makes you open to variety :)
[23:12] <midnightmagic> Phoenixxl: I still have my SupraFax 14.4 v.32bis. It knows how to redial faster than anything and can detect a busy signal before the first beep is even done. It was really good for touchtone telereg before internet course registration existed.
[23:12] <derp> sup fools
[23:12] <midnightmagic> lol
[23:13] <midnightmagic> Okay I'll stop diverting topic. Thanks for the help.
[23:13] <Nick56x> Hello, I have a question. Every now and then on either of my browsers (Chrominum and firefox) I will lose connection randomly. But, in the software centre, or anything else, everything is fine. And, I don';t understand why it is doing that.
[23:13] <Phoenixxl> midnightmagic, at some point I had an a4000 running on UAE and a java telnet client connecting to it
[23:14] <Phoenixxl> midnightmagic, i got frustrated it didn't have the right font , and no zmodem support .. one day i'll give it another go
[23:14] <Dr_willis> Nick56x,  clarify what you mean by lose connection? in some app IN the browser you lose connection? or what.
[23:14] <Phoenixxl> midnightmagic, A-Max got me interested in emulators and flowing from that hypervisors
[23:15] <midnightmagic> A-Max.. what's that now?
[23:15] <Phoenixxl> midnightmagic, Mac emulator
[23:15] <Nick56x> Like, I'll get server not found, or website not available. And I have Ubuntu and Windows dualbooted, and I do not have any problems on Windows... Could it be a compatibility issue with my wireless adapter? Dr_willis
[23:15] <midnightmagic> Phoenixxl: Was that the one done by that poor universally-despised Drew character?
[23:16] <Phoenixxl> I think that was Fusion
[23:16] <midnightmagic> Ah, no. It was Shapeshifter. Jim Drew.
[23:16] <Phoenixxl>  /shrug
[23:17] <Phoenixxl>  I remember Sheepshaver
[23:17] <Dr_willis> Nick56x,  if it was a wireless disconnecting. you would notice it in all apps.  have a terminal open thats pinging some site every 5 sec or so.. and just watch and see if the n etwork goes down every so often.
[23:17] <Phoenixxl>  Shapeshifter .. it rings a bell but can't remember details
[23:17] <Nick56x> Dr_willis, hm, I am a noob to ubuntu. =P What would be the command for that?
[23:17] <Phoenixxl> midnightmagic, we're getting somewhat off topic though
[23:17] <Dr_willis> Nick56x,  'ping somesite'
[23:17] <Nick56x> Dr_willis, thanks.
[23:18] <Phoenixxl> midnightmagic, I sent you a PM about what i'm useing now
[23:18] <Dr_willis> check the options for ping to tell it to ping slowly over time. not constant. ;)
[23:21] <Dr_willis> if ping never dies/fails.. then it sounds like a dns issue, or could be some odd web site issue
[23:22] <Nick56x> I just think it's odd. Sometimes I can connect to any website, and sometimes, I can't
[23:23] <Dr_willis> if wiureless was dropping, there would be a message at the top right i thought.
[23:23] <Nick56x> Yeah, so that can't be it.
[23:23] <betrayd> like a disconnect notification
[23:24] <Nick56x> I changed an option in my browser.... Hope that solves it, because, it's getting annoying, lol.
[23:24] <midnightmagic> Woops, my mistake. Jim Drew didn't do ShapeShifter nor Basilisk. Just wanted to clarify..
[23:25] <Nick56x> Hm, I installed a driver that is for my adapter. I need to restart, so I will reconnect in a minute, and hopefully, that will fix the issue.
[23:27] <Dr_willis> try differnt browsers.
[23:27] <tones> Dr_willis where did you acquire all of your knowledge?
[23:28] <Dr_willis> reading and reading.. and.. reading...
[23:28] <Dr_willis> and playing with computers for years
[23:28] <tones> do you have windows skills as well?
[23:28] <tones> or mostly linux?
[23:29] <Dr_willis> Its hard to exist in this world witout some windows skills..
[23:29] <matanya> not so hard Dr_willis
[23:29] <Dr_willis> ive used windows 8 for all of 8 min.. :) took me all that time to figure out how to setup networking for a guy at work on it.
[23:29] <matanya> you can ignore windows
[23:29] <Dr_willis> No you cant ignore what you may need to use to do a job...
[23:30] <matanya> the best thing it takes 6 clicks to reboot
[23:30] <tones> windows 8 is a toy interface, don't see why businesses would want that os
[23:30] <picca> Have u used windows nt 3.51 Dr Willis
[23:31] <Dr_willis> I missed the whole OS/2 and NT stuff..
[23:31] <Dr_willis> I was on my Amiga up untill windows 95 ;)
[23:31] <Dr_willis> Back in the days of actual DIALUP ISP
[23:31] <Nick56x> Hm, I installed the driver, and I'm stil having problems.... Must be my browser.
[23:31] <Dr_willis> Nick56x,  try other browsers.
[23:31] <Nick56x> Dr_willis: I have, 2 different ones. :P
[23:32] <Dr_willis> i got like 4 installed..
[23:32] <Nick56x> heh
[23:32] <matanya> what is Nick56x 's issue?
[23:32] <Dr_willis> clarify what exactly happens Nick56x .. you just click on a link and sometimes it dosent see/find the url.. but clicking a 2nd time works?
[23:32] <Nick56x> I will randomly lose connection to websites. Where, I am still connected to everything else.
[23:32] <Dr_willis> thats not 'loseing connection'
[23:33] <matanya> you timeout
[23:33] <Dr_willis> unless you mean you have a chat app. or video stream thats streaming FROM a site that disconnects
[23:33] <Nick56x> Either way, this only happens on Linux. So, it could be a compatibility issue, setting, or something else.
[23:33] <Dr_willis> sounds more like a dns/lookup type timeout.
[23:33] <Nick56x> More than likely.
[23:34] <matanya> do you a fixed dns server?
[23:34] <Dr_willis> change dns servers perhaps.
[23:34] <Nick56x> He, um, how would I do that exactly?
[23:34] <matanya> gui or command line?
[23:34] <Dr_willis> network manger settings has the settings
[23:34] <matanya> your call :)
[23:34] <Dr_willis> I tend to use googles dns servers. 8.8.8.8 and err.. i forget the other..
[23:35] <matanya> 4.4.4.4
[23:35] <Dr_willis> or use one from google and one from opendns. ;)
[23:35] <matanya> 4.4.2.2
[23:35] <Nick56x> With stuff like that, I am a complete noob. XD
[23:35] <Dr_willis> but in the newer releases of ubuntu i thought there was some cacheing dns server installed by default
[23:36] <matanya> sudo echo "nameserver 8.8.8.8" >> /etc/resolve.conf
[23:36] <matanya> Nick56x: ^
[23:37] <wes_> hi #ubuntu
[23:37] <matanya> hello wes_
[23:37] <Dr_willis> messing with resolv.conf  by hand. may not survive a reboot any more ;)
[23:37] <dark_djinn> ok, i have an ubuntu server vps...root was enabled. i want to revert to sudo functionality...what commands can i run to add a user, make them sudo-able, then disable root?
[23:38] <wes_> does anyone know what an ubuntu is?
[23:38] <Dr_willis> I set up network manager to use dhcp for the ip. but static for dns.
[23:38] <matanya> good approach as well Dr_willis
[23:39] <matanya> dark_djinn: useradd nameofuser
[23:39] <tones> where is network manager in gnome?
[23:39] <matanya> tones: in the panel
[23:40] <dark_djinn> matanya, then?
[23:40] <matanya> dark_djinn: usermod +g wheel
[23:40] <matanya> assuming wheel is in sudo
[23:40] <Nick56x> Hm, I followed this thread: http://ubuntuforums.org/showthread.php?t=2078398    And hopefully it worked. lol
[23:40] <Dr_willis> its not 'wheel' in ubuntu
[23:40] <matanya> if not, vi /etc/sudoers and add accordingly
[23:40] <Dr_willis> !sudo
[23:41] <Dr_willis> its 'admin' in ubuntu i belive
[23:41] <tones> network tools, proxy and connections but no manager
[23:41] <matanya> why do they change the good old stuff?
[23:41] <xirre> How do you check the current CPU Usage that a process is using by using its PID?
[23:42] <matanya> tones: that is the manager
[23:43] <tones> manual proxy configuration?
[23:43] <matanya> xirre: top -p PID
[23:43] <matanya> tones: what do you want to change?
[23:44] <tones> dns cable numbers to google dns numbers
[23:44] <matanya> go to edit connections
[23:45] <matanya> have that?
[23:45] <tones> yes wired connection
[23:45] <matanya> good, click edit
[23:45] <matanya> go to ipv4 settings
[23:45] <konectd> Anyone watching the Blackhawks and Detroit game?
[23:46] <tones> ok
[23:46] <matanya> and change the method to automatic address only
[23:46] <dark_djinn> ok, got my sudoer going, now how do i disable root?
[23:46] <wes_> destination relaxatin
[23:46] <wes_> relaxation
[23:46] <matanya> and in the dns add 8.8.8.8, save and exit
[23:47] <matanya> sudo passwd -dl root
[23:47] <tones> only way to add an address is to choose manual
[23:47] <tones> it was already on automatic address
[23:47] <matanya> you don't need the address, just the dns tones
[23:48] <matanya> choose the automatic address only
[23:49] <matanya> and then, in the dns servers section add 8.8.8.8
[23:49] <matanya> dark_djinn: did you see my reply?
[23:49] <dkdanielkli> Hey, is anyone here good with Python ?
[23:50] <somsip> dkdanielkli: try #python
[23:50] <dark_djinn> matanya, yeah...was reading the manpage to make sure it would do what i wanted it to do
[23:50] <matanya> k
[23:50] <xirre> How do you check the current CPU Usage that a process is using by using its PID? It needs to be outputted for use by a third party program. (Like how I would get the PID by doing echo "$!" > '/home/directory/file.txt' after a command is initially ran.)
[23:50] <dkdanielkli> somsip thanks bud
[23:50] <dark_djinn> matanya, thanks, btw
[23:50] <matanya> np
[23:51] <dkdanielkli> it says "#python-unregistered Cannot send to channel"
[23:51] <tones> matanya, did it, will there be a speed difference compared to time warner cable
[23:51] <somsip> !register | dkdanielkli
[23:51] <matanya> xirre: try ps -p <pid> -o %cpu,%mem,cmd
[23:52] <matanya> tones: shouldn't
[23:52] <matanya> xirre: sorry: ps -p <pid> -o %cpu
[23:52] <tones> then what would be the purpose of using google server dns numbers?
[23:52] <tones> instead of time warner
[23:52] <matanya> reliable
[23:53] <tones> ok
[23:53] <DominicRS> Ubuntu
[23:55] <xirre> I'm getting somewhere. It displays the CPU Usage, the %mem and %cmd can be of use in the future for me so no need to apologize. :) -- But how do I store the CPU% in a file..? I tried echoing it but that doesn't seem to work.
[23:57] <xirre> How do you check the current CPU Usage that a process is using by using its PID? It needs to be outputted for use by a third party program. (Like how I would get the PID by doing echo "$!" > '/home/directory/file.txt' after a command is initially ran.) -- I was told earlier to use ps -p <pid> -o %cpu  but i'd like to store this information momentarily so a third party can retrieve it and delete it after it has received it.
[23:58] <Gabboz> Hi!  12.04.2 Server.  I have an internal HDD and an external HDD on a server.  If I touch /forcefsck will that also fsck the external HDD?  Thanks.