doc|homehello, I'm getting this one my second screen and wondering if anyone can help: http://www.skynet.ie/~doc/example.jpg. My xorg is here: http://pastebin.com/jeM8RTdL03:08
holsteindoc|home: i would need to troubleshoot.. try diffrent monitors, and different drivers.. xorg changes03:24
doc|homeholstein: I used to have a 1680x1050 monitor on there and it worked fine03:24
doc|homeI've tried a couple of different nvidia drivers and same result for both03:24
doc|homeand a couple of different xorg changes, including edid data03:25
doc|homewith no change03:25
holsteindoc|home: sometimes, i fire up a knoppix live CD and see what i can do.. and save the xorg.conf03:25
Unit193I'd just assume arandr doesn't help either?03:25
doc|homehmmm, ok, can keep that as a last resort03:25
doc|homeUnit193: what would I do with it?03:26
holsteindoc|home: try setting your settings with it03:26
holsteinalso, is it a known good monitor?03:26
doc|homeholstein: this monitor was used with no problems with a laptop03:27
doc|homewhat do I do with arandr?03:27
holsteindoc|home: that could be rhetorical.. unless you have not recently seen the monitor being used.. because, if you have seen it being used recently, you can confirm it is functioning properly03:28
doc|homeactually. running arandr now, everything looks ok there03:28
holsteindoc|home: open arandr, and configure the dual setup.. try mirroring... try *anything*03:28
doc|homeholstein: I have03:28
doc|homeok, will try mirroring03:28
doc|homeinverting however? a terrible idea. Am typing upside down now :D03:29
Unit193(Fun to set on others computers.)03:30
doc|homeok, so, arander modifies as expected, but still 4 way split03:30
ubottuTämä kanava on tarkoitettu vain englanninkieliselle keskustelulle. Jos haluat suomenkielistä apua (K)ubuntun ongelmiin, liity kanavalle #ubuntu-fi / #kubuntu-fi :-)04:43
doc|homeanyone got any suggestions? I found this in my logs: http://pastebin.com/iEZuDwwr04:48
Elitenudel2500amdcccle requires system reboot every time i change something?!05:46
Elitenudel2500anyone have a clue on what to do05:46
doc|homeI'm using a shimian achieva as a second screen and getting http://www.skynet.ie/~doc/example.jpg. My xorg.conf is http://pastebin.com/tWzJNXV1 and logs are http://pastebin.com/iEZuDwwr Logs should give useful info, but I've no idea how to fix it. Any ideas?07:01
=== Myrtti_ is now known as Guest91874
=== Guest91874 is now known as Myrtti
xubuntu172I recently found a need to share my wired internet access via wifi. Last time I did this, a couple of years ago, I used Network Manager to create a hotspot. This was easy, as there was a big friendly button labeled "Use as Hotspot" which did just what I want. Back then, I was using Ubuntu.  Now this button is missing. Any ideas?10:21
xubuntu172hello krozus10:25
=== stoeptegel is now known as ducktool
xubuntu172hello ducktool10:25
ducktoolhi there10:26
xubuntu172pretty quiet here10:27
ducktoolthat because it's an official support channel10:28
ducktoolcheck #xubuntu-offtopic , you probably have more success there10:29
xubuntu172aha. i'll go back to listening.10:29
michaelshilohI recently found a need to share my wired internet access via wifi. Last time I did this, a couple of years ago, I used Network Manager to create a hotspot. This was easy, as there was a big friendly button labeled "Use as Hotspot" which did just what I want. Back then, I was using Ubuntu.  Now this button is missing. Any ideas?10:34
baizonmichaelshiloh: http://docs.xubuntu.org/1304/internet-networks.html10:39
lderanhello freedomrun, are you in need of some help? :)10:49
freedomrunyes lderan ..10:49
ubottuPlease don't ask to ask a question, simply ask the question (all on ONE line and in the channel, so that others can read and follow it easily). If anyone knows the answer they will most likely reply. :-) See also !patience10:50
freedomrunI`m trying to make script (I guess if no other solution is found) to speed up menu loading for 1st time after reboot .. and xfce-docs are pointing here: https://developer.gnome.org/gtk2/2.24/gtk-update-icon-cache.html10:50
freedomrunnot shure how to load icon-theme.cache file ... maybe using cron or just delay in script to load file 5minutes after loading of desktop so the whole xfce loading experience at start doesn`t suffer10:53
baizonfreedomrun: yes, and your question?10:55
freedomrunwell my question is based on that, but to simplify: "How to load icon-theme.cache file in memory?"10:56
freedomrunexept clicking on menu button10:56
baizonfreedomrun: have you tried to run the gtk-update-icon-cache?10:57
baizondoes it help?10:57
baizonif yes, then write a simple shell script which starts after the system hast started up :)10:57
freedomrunyes I did included that in testing and it didn`t help10:57
baizonfreedomrun: are you sure you did it right?10:59
baizonlike this: gtk-update-icon-cache -f -t ~/.icons/<theme_name>10:59
freedomrunafter 1 click on menu button there was high HD activity (loading icons) and menu showing was slow (as manny GUI apps are installed on this machine) .. once menu was loaded everything runs pretty fast11:00
freedomrunbaizon, thnx .. I`ve made an error in theme path .. thnx for poiting out11:00
baizonfreedomrun: np11:00
freedomrunso universal solution looks pretty impossible11:01
freedomrunevery user need to do that for the teme he/she is using11:01
freedomrunsome variable in script could come handy11:01
=== jeanaustinr is now known as jeanaustinr|x
=== Guest48162 is now known as mulkku
=== jeanaustinr|x is now known as jeanaustinr
zipydoes someone know where i can find the program "disk" from ubuntu in xubuntu?13:21
TheSheep!info disk13:22
ubottuPackage disk does not exist in raring13:22
TheSheepzipy: there is no such program13:23
TheSheepzipy: in ubuntu13:23
zipyhmm i thought disks was the english name of it13:23
TheSheepzipy: you need to be more precise. What are you trying to do?13:24
zipyi found it its gnome-disk-utility13:24
zipyehm i use it for smart check etc13:24
zipyquick format crypted hdds13:25
zipyits faster then to do it with terminal ^^13:25
zipyjust the lazy way :d13:26
zipyi got xubuntu installed on my eee 1101ha, i got the fn keys to work, but somehow nothing happens when i try to adjust brightness.. i only see the symbols with the status bar going up or down but the brightness doesnt really change13:28
zipydoes someone know how to fix it?13:28
ubottuTämä kanava on tarkoitettu vain englanninkieliselle keskustelulle. Jos haluat suomenkielistä apua (K)ubuntun ongelmiin, liity kanavalle #ubuntu-fi / #kubuntu-fi :-)15:10
=== mulkku is now known as Keijo_
recon_lapjust saw that ubuntu forum got hacked yesterday.15:48
=== konstantin_ is now known as konst
Keijo_when i put cd in, i cant read it16:00
recon_lapKeijo_: broken cd?16:01
recon_lapKeijo_: broken CD Drive?16:05
MyrttiLinux rarely does autoplay16:05
Sysifor audio disk one probably needs codecs17:42
ChaserHi, how to set a keyboard shortcut key to open a new tab in the terminal window. cntrl+shift+t used to work. But I can't figure out how to reset it.18:41
ChaserFile->Open Tab no longer shows corresponding keyboard shortcut beside it.18:43
krytarikChaser: In Xfce4 Terminal, "Edit -> Preferences -> Shortcuts".18:43
Chaserkrytarik, thanks but Preferences doesn't list shortcuts tab. I only see General Appearance Colors Compatibility and Advanced.18:44
elfysettings - keyboard - shortcuts18:45
ChaserI am on Ubuntu 13.04.18:45
krytarikChaser: Then you are using Gnome Terminal.18:45
Sysinope, it isn't present in 13.04 anymore18:46
Chaseryup thats seems to be the case.18:46
krytarikWell, my fault then, didn't check it on Xubuntu 13.04 yet.18:47
Chaserelfy, I cant see it under keyboard - application shortcuts as well :(18:49
ChaserSysi, cool - let me try that.18:50
ChaserSysi, Thanks ! It worked ! Cool way to set keyboard shortcuts. I must have reset it accidentally as it used to work for a while.18:51
elfyChaser: not sure why you're not seeing it there, but nvm now :)18:54
dmjhi, was wondering if anyone could speak to the stability of xubuntu on a macbook pro19:02
dmjI know ubuntu 13.04 has many drivers ootb, does xubuntu use these as well?19:02
krytarikdmj: Well, it's based on Ubuntu, so yes.19:03
dmjkrytarik: So is the only difference the use of xfce over gnome?19:04
krytarikYeah, quite.19:04
dmjkrytarik: exactly what I needed to know, thank you19:04
dmjkrytarik: installing arch on my retina was quite a chore. Not too stable for me. Hoping Xubuntu will be more user-friendly and slimmer than ubuntu.19:05
xubuntu666hi, what's the best way to run xubuntu from usb drive without installing; I downloaded the image.19:37
recon_lapxubuntu666: you just don't install ? not sure what the boot sequence looks like atm though.19:53
recon_lapxubuntu666: these instructions my help http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-ubuntu19:54
recon_lapxubuntu666: maybe I should look for windows version19:55
recon_lapxubuntu666: http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-windows19:56
fabiobikhello guys21:21
fabiobikim trying to use motherborad and graphic card to mutiple monitors (2)21:21
fabiobikthe once connected to motherboard vga not working21:21
fabiobiki'been on setting and only 1 monitor appears21:22
recon_lapfabiobik: can you run integrated gpu and a card, not sure you can.21:24
fabiobiki made that in windows for ages...21:25
recon_lapfabiobik: ok, guess you can then.21:25
recon_lapfabiobik: you have checked system->display for both screens21:27
fabiobikjust appear 121:28
Sysithat's gonna require some xorg.conf tweaking21:29
recon_lapfabiobik: afraid I cant be any more help. long time since I've messed with X21:29
Sysi(I've never done that and it's quite late here)21:30
fabiobikoh okay21:31
ubottuThe X Window system is the part of your system that's responsible for graphical output. To restart X, type 'sudo /etc/init.d/lightdm' on an ubuntu system. replace with kdm on Kubuntu. To fix screen resolution or other X problems: https://wiki.ubuntu.com/X/Config/Resolution . Also see !xorgconf21:31
ubottuThe /etc/X11/xorg.conf file is deprecated, but sometimes may still be needed to pass values to specific drivers. Generic xorg.conf generation: http://ubottu.com/y/xorgconf - ATI/AMD ( fglrx driver ) specific: http://ubottu.com/y/atiamd - NVidia ( nvidia driver )specific: http://ubottu.com/y/nvidia man xorg.conf for file structure and syntax.21:31
voyager79hello good night everybody...21:54
voyager79i have a problem with applications menu ...it just dissapear and a windows error say: Error en la línea 1, carácter 1: the file was empty or only has blank files21:57
voyager79somebody knows what i can do? i apologize forever21:58
recon_lapvoyager79: guessing if you delete the menu config files they will recreate, wonder what the file is called though21:59
recon_lapvoyager79: this might help https://help.ubuntu.com/community/XubuntuPanels22:02
voyager79thanks i tried deleting file xfce4-applicationsmenu but doesn't works i tried to upload de panel with apt-get install xfce4-panel but either... now im reading about xubuntupanels...22:15
voyager79i would like to reinstall all xfce4-panel22:15
rowboatnickjust jumping in without reading; did you logout and then in?22:16
recon_lapvoyager79: try delete the panel and create a new one22:16
voyager79yes that what i want to do recon...22:16
recon_lapvoyager79: I just mean delete that panel, not re-install xfce4-panel22:17
voyager79yes i understand... just the panel where is the problem not all the xfce4-panel22:18
recon_lapvoyager79: open panel preferences and remove from there, then add a new one22:18
voyager79ill try to do it22:18
recon_lapvoyager79: right click on the panel to get panel preferences22:23
voyager79i removed the panel 022:25
voyager79and now im configuring another new22:25
voyager79im searching the appmenu launchstart...22:26
voyager79i found but it doesnt works same error...Error en la línea 1, carácter 1: El documento estaba vacío o solo contenía espacios en blanco22:27
recon_lapvoyager79: have you logged in and out?22:29
recon_lapvoyager79: after stopping it from saving your session22:29
voyager79ok ill do i came back then... thanks very much recon...22:32
=== GNUdru1 is now known as GNUdru

Generated by irclog2html.py 2.7 by Marius Gedminas - find it at mg.pov.lt!