[00:00] nvm, I see it on g+ [00:11] RobbyF: anything in the last week should have it [00:11] the click scope has been there for a while [00:11] there just weren't apps available until recently :) [00:11] letting us install from the scope too? [00:11] I just tried but I didn't see it show up. [00:12] RobbyF: did it go through the install process? If so, try searching from the Apps lens for what you installed [00:12] it went to 100% but it didn't say open like the mock up XDA app from last week. [00:13] didn't show up in apps lens. I'm reflashing now but i'll toy with it again [00:13] hmmm, after it gets to 100% it should show "Open", "Pin to launcher" and "Uninstall" buttons, none of which work yet [00:16] aww, I think i was on home lens not the apps [00:20] everyone's in a rush and this stuff was announced slightly before some of the necessary fixes are on the image [00:20] something with click 0.4.0 should do a bit better [00:51] cwayne: if you're looking for a way to contribute to the Ubuntu SDK, cross-compilation support would be really nice to have [01:14] But be careful to discuss that with the foundations team first if you do work on it (or study the recent vUDS session), since there are several ways to do cross-compilation and we're only interested in one. [01:56] Is there a way to set the time zone on an ubuntu-system image? === _salem is now known as salem_ [02:51] https://sites.google.com/site/androidnothize/no-dock/input-device-and-backlight Boo for hard coded [02:51] =) [02:51] "The brightness level of the display panel is however, a little bit hard-coded to two different locations primary distinguished by Samsung and non-Samsung device. For most devices, the brightness level can be found from /sys/class/leds/lcd-backlight/brightness (such as Motorola and HTC), while Samsung devices have it in /sys/class/backlight/s5p_bl/brightness." === salem_ is now known as _salem [03:32] so uhh, fetching the projects is taking a while [03:32] so i came in here [03:43] mhall119: I don't know if there is anything different with your click package. I didn't see yours-- I just created mine :) [03:43] mhall119: but yes 'click build .' will build it [03:43] hi === chihchun is now known as chihchun_afk === Namidairo`bnc is now known as Namidairo === Namidairo is now known as Namidairo`bnc [05:14] Hashcode, dont you do the maserati? [05:14] I do yes [05:14] I remember that! From me trying webos... =) bugging your twitter [05:14] Hows it going with lxc? [05:15] We need some build changes [05:15] I have a droid4... so I am wondering [05:15] I am almost finished on the touchpad... [05:15] But I think we're close. I need to get back over the UbuntuTouch stuff. [05:15] this was harder [05:16] I have a backlog :/ [05:16] thanks for all your work on my phone! highly appreicated! =) [05:16] I bet the TP was tough [05:16] 2.6.35 kernel [05:16] Yep [05:16] Tho that by itself isn't a killer [05:16] would be nice if it had more solid cm10.1 code... that was stable [05:16] yeah [05:16] And quite a few blobs in the build? [05:16] I am initializing sound from webos =) [05:17] or were most of that worked out? [05:17] yep [05:17] The blobs are what hurt [05:17] Was the audio HAL never ironed out in Android side? [05:17] hcattach from.. webos.. ts_srv for touchscreen, etc, at least the egl libs come over on their own with this source [05:17] yeah they just updated that [05:18] ah nice [05:18] to get mine working I had to use /usr/share/alsa/ucm from.. webos?? for msm-audio [05:18] ew [05:18] and then uncomment a line for /etc/pulse/default.pa alsasink [05:18] and then of course mount webos and run it's audiod to get sound initialized for alsa and pulse [05:19] AudioFlinger doesn't even start for me [05:19] yep [05:19] =) [05:19] oh [05:19] to get my camera and sound and sensors to work [05:20] I had to use /system/lib/hw files from cm10.1 rom [05:20] that helped [05:20] heh [05:20] I also changed my fstab to say what I wanted, and commented out update-fstab [05:21] told the sensor service to be main instead of late start [05:21] oh [05:21] an here is a strange one [05:21] Yeah a lot of my devices will need the cmdline patch to specify system/usr partitions [05:21] to get the phalet session..ubuntu touch session to start [05:21] yep [05:22] (which is merged now for the most part thanks to ogra_) [05:22] "/etc/init/ubuntu-touch-session-setup.conf needs sleep60 before running ubuntu-touch-session" [05:22] yeah.. ogra helped me a lot [05:23] Touchpad running lvm partitions, I had to compile e2label and lvm for touch and change udev rules [05:23] touch script [05:24] I remember going nuts trying to get the maserati to boot.. first time I side loaded anything.. it was strange.. I forgot it all I think [05:24] the kernel you compile [05:24] it won't boot without something [05:24] a file is required somewhere [05:24] fixboot.sh [05:25] and bbx both need to be in the /sbin [05:25] I am posting this now!! thank you! [05:25] Well [05:25] If you build from the android repo, you can use the kernel and ramdisk.img [05:25] (just put them in /system/etc/kexec) [05:25] that was it... system/etc/kexec! [05:26] that is where the kernel needed to be [05:26] yep [05:26] Thanks! [05:26] np [05:26] Do you want to run a test for me? [05:26] I forget what I posted on your twitter and why I was so excited.. It was a script I was working on [05:26] sure [05:27] I need to change the phone though.. 0% [05:27] 1 moment lemme finalize this build. [05:27] np [05:27] problem is my charger is at work so I am using the hp charger.. 1.3 amp [05:28] it does strange things... while plugged in.. touch screen stops working right, unplug and its fine [05:28] I bet you know this [05:28] yeah [05:28] yep === Namidairo`bnc is now known as Namidairo [05:29] there are a couple of devices with issues like that [05:29] I am still on ics, because I need to remove.. everything.. and then upgrade to jellybean [05:30] After this I was going to see what webos was up to again... [05:30] on the maserati [05:32] Why not do another rom-slot? [05:32] that is what I do [05:33] Ah I read that as: I'm stuck on ICS because i don't want to move everything [05:33] thought last I tried on webos, I got everything but sensors and touchscreen and wifi working... But I did get graphics working [05:33] I think I had to compile a module for the kernel from... qcom [05:33] oh for the TP? [05:33] maserati [05:33] You put WebOS on the D4? :P [05:33] powervg or powervr gpu [05:34] yeah [05:34] heh [05:34] webos on droid4 [05:34] I used your ubuntu touch source [05:34] oh [05:34] =) [05:34] funny :p [05:34] yeah! [05:34] I plan to work on it again.. [05:34] There's quite a few blobs on the Moto OMAPs still [05:35] stupid camera [05:35] proprietary audio RIL and some other things hurt. [05:35] camera is mainly the codec binary [05:35] Any OMAP has the same issue tho [05:35] I had to change x and y axis in the kernel o get rotation working right in apps [05:35] but the camera is not flipped correctly [05:36] oh? [05:36] I wonder if it's the keyboard switch not being handled correctly [05:36] So it's rotating the device [05:37] This guy named dorregay had 5 patches for the camera.. one of them will work [05:38] 5 patches? [05:49] OrukuSaki: so when you get a charge back on the D4, I have a new Safestrap out [05:49] http://goo.im/devs/Hashcode/maserati/Safestrap-Maserati-3.50.apk [05:50] mind you.. that's very new and may have bugs :P [05:58] @Hashcode Sweet.. I shall give it a whirl. I found something interesting in my camera code.. if (dev->preview_mode != 0) { memcpy(vaddr, frame, width * height * 3 / 2); [06:21] @Hashcode... booting [06:21] with updated safestrap [06:23] booted into a black screen.. I connected a usb cable.. booted phone automatically.. safestrap menu came up on after moto boot loader, now I am in your new safestrap... good job [06:24] wow.. swipe to unluck =) [06:24] nice [06:24] and a console! [06:24] output [06:24] =) [06:24] sweet! [06:24] kick ass man! [06:28] :) [06:28] A lot of the updates are the new TWRP base [06:28] It was a complete re-write for my Safestrap stuff going from TWRP 2.2.2.1 to 2.6.1 === Zuardi_ is now known as Zuardi === jjardon_ is now known as jjardon === Namidairo is now known as Namidairo`bnc === Namidairo`bnc is now known as Namidairo === b0bben_ is now known as b0bben [10:02] hiya, can i install ubunt-touch on N900 ? [10:02] o_o i was just wondering if we have port to it [10:02] i think you'll hit issues with that n900 doesn't grok thumb2 very well [10:03] Stskeeps: just for testing :) if there is any article or refs [10:03] https://wiki.ubuntu.com/Touch/Devices [10:04] cant afford to buy nexus atm :P [11:15] I am following the porting guide, but no zip is generated at the end of the build process [11:15] Although no errors are thrown [11:15] (building for Galaxy S btw) === _salem is now known as salem_ === salem_ is now known as _salem [11:32] I get this error although it doesn't really say error (so grep didn't find it [11:32] ) [11:33] make: *** No rule to make target `~/ubuntuTouch/out/target/product/galaxysmtd/android-boot.img', needed by `~/ubuntuTouch/out/target/product/galaxysmtd/obj/PACKAGING/target_files_intermediates/cm_galaxysmtd-target_files-eng.name.zip'. Stop. [13:17] @balachmar you around? [13:17] edit build/core/makefile [13:19] make it look like this, I removed a line http://pastebin.com/Ft39cQKc [13:54] Can i install ubuntu touch on a samsung galaxy tab 2 10.1 3g or a samsung galaxy s2? [13:54] LordHazious: https://wiki.ubuntu.com/Touch/Devices [13:55] Kk thanks [13:57] Will ubuntu touch keep my google contacts [13:58] LordHazious: http://sergiusens.github.io/posts/google-contacts-on-ubuntu-touch.html [13:59] Can i ssh into ubuntu touch [14:00] LordHazious: https://wiki.ubuntu.com/Touch/Porting#SSH [14:00] LordHazious: Everytime you ask a question, I google it and find it in 15 seconds. Sooooo, maybe you can knock me out of the equation and just do it yourself [14:01] ok lol i did not know you where a real person lol your name starts with ibot [14:17] OrokuSaki: I'll be back in about half an hour, and then I will try your suggestion === Namidairo is now known as Namidairo`bnc [15:01] OrokuSaki: OK, I'm back and I edited to resemble what you had, but just edited a few lines. My Makefile there is a lot bigger than just those lines. [15:01] OrokuSaki: ooh, and still no luck [15:01] yeah its just a snippet.. [15:01] did you remove that one line? [15:01] should have just been a single line [15:02] $(INSTALLED_BOOTIMAGE_TARGET) \ right after that [15:02] BOOTIMAGE_ANDROID_TARGET or something [15:02] that one line needs to be removed, at least for me [15:02] and most of us.. etc [15:03] all else fails asl ogra or w-flo [15:03] ask [15:04] OrokuSaki: wellm in my Makefile I didn't have those separate lines, but just this: zip_root := $(intermediates)/$(name) [15:04] OrokuSaki: So there was nothing for me to remove there :) [15:14] OrokuSaki: So which line did you remove, because maybe I should remove it from main.mk [15:38] ogra_, do you know something about video in 08-31? [16:41] !balachmar please paste your build/core/Makfiles to pastebin and post a link [16:41] OrokuSaki: I am only a bot, please don't think I'm intelligent :) [16:41] @balachmar please paste your build/core/Makfiles to pastebin and post a link [16:41] okay ubot5 [16:42] Makefile [16:55] OrokuSaki: http://paste.ubuntu.com/6048370/ [17:07] @balachmar "$(INSTALLED_BOOTIMAGE_TARGET_ANDROID) \" line 1242 [17:07] remove that line [17:08] and only that line [18:03] guys [18:03] can anyone tell me the relase date of stable ubuntu OS for google nexus prime (i9250) [18:03] can anyone tell me the relase date of stable ubuntu OS for google nexus prime (i9250) [18:07] hello guys.... [18:12] OrokuSaki: ok, it seems to be compiling, because it is taking a lot longer than before! [18:12] =) [18:12] OrokuSaki: can't wait to give it a try! [18:13] Very sorry that the Edge didn't succeed [18:13] you may have more work to do, but it's a start [18:13] if more devices get ported, and more people use UT, then one day it will [18:14] UT has some more work to do, to compete with android, but.. it's coming along [18:15] Getting a decent user base will be a challenge, but what I have seen so far looks pretty good [18:15] And I would love to run some of the command line tools on my phone :) [18:15] What will really get the ball rolling is nerds showing it off to other nerds.. and people wishing they could show it on their device, just to in turn, impress more nerds.. [18:16] Like Windows Chicago [18:17] :) If I get it to work, I will definitely show it to my nerdy friends, and even some non nerd friends :) [18:17] Windows Chicago? [18:17] A that was the win 95 beta [18:17] :) [18:18] I didn't know about that [18:19] OrokuSaki: mmm, I get this error: mkdir: cannot create directory ‘/RECOVERY’: Permission denied [18:19] strange [18:19] Well, I don't think it should try to create /RECOVERY on my build machine, should it? [18:19] you didn't use sudo or do anything as root did you? [18:19] nope [18:19] hmmmm [18:20] that would be a question for ogra or w-flo [18:20] @ogra_ ? [18:20] @w-flo ? [18:21] @ogra_ @w-flo : mmm, I get this error when trying to build for Galaxy S: mkdir: cannot create directory ‘/RECOVERY’: Permission denied [18:22] make clean and retry? [18:22] perhaps and fstab problem... somehow...??? doubtful [18:23] or.. run brunch again [18:23] and it might somehow fix it on the second run on its own [18:23] that happens to me sometime... [18:24] I did clean, now brunching again :) [18:25] cross fingers [18:41] No way to type on Nexus 7 with Ubuntu Touch? | http://askubuntu.com/q/339792 [18:52] that question needs to be more specific [18:52] saucy.. right? What build? What day? [18:53] http://cdimages.ubuntu.com/ubuntu-touch/daily-preinstalled/ [18:53] which one? [18:54] or did you use ubuntu-touch-preview [18:55] OrokuSaki: ok, clean and build, didn't change anything, now just ran brunch again [18:56] yeah.. monday around 8-9am central time.. ogra is always on.. ask him [18:57] be sure you did the porting guide... binary blobs... extract-files.sh if necessary [18:57] you need cgroups in the kernel [18:57] I had to look at a config file for mako, but this was after I could compile [18:57] so forget all that [18:58] paste your terminal to paste bin.. lots of it.. maybe there is an error higher up? [19:02] ok, running brunch with pastebinit :) [19:05] lool: force published today's daily to system-image, confirmed it seems to work fine and has system-image 1.4, so we should be good for Tuesday [19:29] @ogra_ @w-flo @OrokuSaki: I get these errors/warnings thrown when I try to build: http://pastebin.com/aKtNtQJE [19:34] @balachmar make CONFIG_DEBUG_SECTION_MISMATCH=y [19:35] what this means is, you changed the settings in your kernel's config file, but.. what you need to do is run make oldconfig on your kernel, with your changes.. you have some yes no questions to answer.. it wants to ask you [19:36] when you do answer it.. THEN you can use that .config file as your defconfig file [19:36] make ARCH=arm oldconfig in your kernel root's folder (I copy the kernel to a seperate folder, as you may need to do this again). with a .config file in the root of the kernel folder [19:37] answer the new questions [19:37] then copy the new .config as your defconfig in the ubuntu touch source [19:37] then it should build the kernel [19:38] I look at mako's config file [19:38] you will need this according to w-flo CONFIG_TMPFS_POSIX=y [19:38] so go ahead and do it [19:38] it does work [19:46] mhall119: Hi, I need your help, but it may be by private?, I write from Colombia [19:53] @balachmar also be sure your kernel source has been make cleaned and make mrproper [19:53] the kernel source your using in the ubuntu touch folder [20:31] Hi, could I get some help installing the community build on the google nexus 4? [20:31] Hello. [20:31] Hey [20:32] Anyone knows to install ubuntu on note 2? [20:33] Ive been trying it for quite some time, Never did i succeed [20:35] Does anyone even speak.. or is this place always so quiet? === Fyodorovna is now known as sporkeee [21:13] good afternoon. i need a bit of tech help with a galaxy nexus that failed install of ubuntu and now won't start.. just a screen with "google" and a small lock symbol [21:14] hello? [21:20] pace, hello [21:20] paco664, hello* [21:21] paco664, it probably failed mid flash [21:21] paco664, can you boot into recovery? [21:21] in recovery it shows the google screen with a lock and nothing [21:22] how can i restart the flash process ? or is that a good idea? [21:23] well can you connect thru adb? [21:23] yess [21:23] try restarting the flash process [21:23] ok. [21:24] will report back in a few mins [21:26] ERROR:phablet-flash:Command 'adb reboot bootloader' returned non-zero exit status 1 [21:26] thats what happened [21:27] INFO:phablet-flash:Device detected as grouper INFO:phablet-flash:Download directory set to /home/b/Downloads/phablet-flash/ubuntu-touch/20130828.1 INFO:phablet-flash:Download directory set to /home/b/Downloads/phablet-flash/ubuntu-touch/20130828.1 INFO:urllib3.connectionpool:Starting new HTTP connection (1): cdimage.ubuntu.com INFO:phablet-flash:Download not required INFO:phablet-flash:Restarting device... wait error: device not [21:27] hmm [21:28] i think you should try restoring to a backup or a stock configuration and redo the flash steps [21:28] can you point me to a good "how to" to kind of hold my hand through it? [21:30] http://wiki.cyanogenmod.org/w/Install_CM_for_grouper [21:30] paco664, i never worked with that device so you can try that [21:30] if you have recovery working [21:31] you can copy the download to the sdcard and skip to the section that says install using recovery [21:31] thank you.. we shall see... i may have pooched it.. [21:32] i been there a couple of times always been able to get them working again :D === sporkeee is now known as wilee-nilee === claydoh_ is now known as claydoh