[00:03] <rmoore> any of you guys have any experience with Wine? half life 1 installed just fine but once I got about 10 minutes into the opening sequence the sound just turned into a low grumbling echo
[00:04] <Poisoned_Dragon> I be fuzzy with wine
[00:07] <goddard> how can i attach the super key to my xfce menu?
[00:08] <brainwash> goddard: the command "xfce4-popup-applicationsmenu" triggers the xfce menu
[00:09] <goddard> brainwash: ok
[00:09] <goddard> brainwash: thanks
[00:10] <brainwash> but you might be not able to assign it to a single key like the modifier <super>, not sure
[00:11] <goddard> brainwash: it worked
[00:11] <brainwash> great :)
[01:54] <bcgrown> I have Intel HDA (AL887) sound and I can't play multiple audio sources at the same time after I upgraded to 13.10.  It worked before.  How do I make it work again?
[01:54] <bcgrown> *ALC887)
[02:50] <slesher> i'm setting up an external usb hard drive, creating an ext4 partition.  how do i give the partition a label?   xubuntu 13.10
[02:52] <slesher> nevermind, figured it out.  mkfs.ext4 /dev/sdb1 -L LABELNAME
[02:54] <genii> If already formatted: sudo tune2fs -L Label-name /dev/sdX#
[03:04] <slesher> thanks genii
[03:04] <genii> :)
[03:06] <slesher> i have it formatted and labeled. now i'm trying to figure out why it's auto-mounting as read-only
[03:07] <slesher> or only writeable by root
[03:13] <genii> The device itself is owned by root and will always be, since that is decided at boot time when it is detected.
[03:14] <genii> The usual method is to create folders on it which are then in turn owned by the users who should be using them
[03:16] <slesher> ok, thanks
[03:53] <legg1> Right, when i boot up now, i get an error with swap not being mounted / not ready (i dont even have a swap drive) - and "waiting for network", which suddenly happened out of the blue. any ideas?
[04:35] <xubuntu365> hi, i'd like help solving pulseaudio issues: distortion, random crashing
[04:37] <holstein> xubuntu365: crashing?
[04:37] <holstein> pulse audio is crashing?
[04:37] <holstein> xubuntu365: i would look for and apply all upgrades
[04:40] <cfhowlett> xubuntu365, sudo apt-get upgrade && sudo apt-get dist-upgrade
[04:40] <cfhowlett> and possibly backports enabled
[05:01] <ball> hello Noskcaj
[05:01] <Noskcaj> hey ball
[05:38] <ticamai> I'm running Xubuntu on a three display setup. I want the 3 displays to be treated as one large display rather than 3 separate displays. So when i maximize something, it should span all 3 screens. I'm using AMD with updated fglrx drivers.
[05:51] <finious> Hello
[05:51] <cfhowlett> finious, greetings
[05:51] <finious> I was wondering if anyone could help me with something
[05:52] <cfhowlett> !ask
[05:52] <genii> Details might help :)
[05:52] <finious> Just installed xubuntu for the first time and there's this thing here  http://imgur.com/mtXA4gA
[05:53] <finious> When I click it, a tiny white box appears under it probably like 5 pixels wide.
[05:56] <finious> Nothing?
[05:56] <cfhowlett> one ... be patient.  we're volunteers, not paid tech support!
[05:57] <cfhowlett> 2.  that's your speaker icon and in 13.10 the sound display acts strange.  it's showing speakers are muted.  right click and unmute
[05:58] <finious> I figured it was the speaker icon. I don't get that option when I right click it. Just stuff about the panel.
[05:59] <finious> It has "Indicator Plugin" greyed out.
[05:59] <cfhowlett> finious, right.  a known bug.
[06:00] <cfhowlett> Bug #890262
[06:01] <cfhowlett> finious, sound apparently works, but the indicator doesn't.  it'll be fixed at some point.
[06:01] <Unit193> Can edit the service file, or compile panel wrapper+xfce4-indicator-plugin.
[06:34] <xubuntu072> anyone know how to change the login background for the disk encryption?
[06:44] <xubuntu072> hello
[06:45] <xubuntu072> does plymouth handle the splash screen for the initial password for FDE?
[06:48] <xubuntu072> nevermind...
[08:59] <sharpnel>  hello i was just wandering if is there any way to make xubuntu make every new file and folder created under my home directory with modes 0700?
[09:36] <Guest82464> does zram offers any performance on xubuntu with 2gb ram?
[12:33] <xubuntu549> ciao
[12:34] <xubuntu549> come funziona? faccio domande e qualcuno risponde?
[12:34] <cfhowlett> !it
[12:35] <xubuntu549> grazie
[14:53] <Xol> My update from 13.4(?) to 13.10 has left me unable to login to the Desktop env, it just seems to loop back to the login screen. (VirtualBox install), has anyone come across this?
[14:55] <Junka> Why the super button does not open the menu? Unity does that damn! :D
[14:59] <kgb> geez
[15:00] <kgb> Xol: i recall seeing something like that.. but prolly you should just try to reinstall the video driver
[15:00] <GridCube> Xol, log into a tty, press the left ctrl key and F1, log in to your account and remove/rename the .Xauthority and .ICEauthroity from your home directory
[15:00] <kgb> ^ or that, sorry lolz :)
[15:00] <GridCube> then log back to your graphical instance
[15:02] <GridCube> or was it the right ctrl...
[15:02] <Xol> Thanks kgb + GridCube, sadly after removing the files I am now greeted with a black screen instead of my old looping login prompt
[15:02] <Xol> Left works :)
[15:02] <Xol> A reboot has not improved things sadly
[15:02] <GridCube> Xol, ?
[15:03] <GridCube> O_o thats unusual
[15:03] <GridCube> Xol, log back to tty1 and do sudo service lightdm start
[15:03] <Xol> "Job is already running"
[15:04] <GridCube> then tty7 has no greeter?
[15:04] <Xol> restarting it throws me back to the same black screen
[15:04] <Xol> Woah 7 dropped me to a ghetto desktop
[15:04] <GridCube> do sudo apt-get install xubuntu-desktop?
[15:05] <GridCube> no question mark
[15:05] <Xol> To be honest I will use this ghetto desktop to backup my stuff and just nuke the install :)
[15:05] <Xol> Thanks for helping me out
[15:05] <GridCube> dont worry, its really unusual though
[15:06] <GridCube> im telling you the safest things to do
[15:06] <Xol> Okay I will give it a shot
[15:06] <Xol> Should I run that from tty1?
[15:08] <Xol> ".. is already the newest version"
[15:09] <GridCube> oh well, i don't know then
[15:10] <Xol> I am a bit confused why tty7 works somewhat
[15:12] <slesher> Junka:  Ctrl+Esc to open the menu
[15:33] <xubuntu342> whee!
[18:54] <xubuntu213> yop some one ?
[18:54] <knome> !someone | xubuntu213
[18:57] <xubuntu213> my instalation progress stop at the bcmwl-kernel-ource configuration
[18:57] <xubuntu213> what can I do ?
[18:57] <xubuntu213> Bonjour
[19:06] <xubuntu213> ... pleaz
[19:10] <xubuntu536> per parlare italiano?
[19:11] <knome> !it | xubuntu536
[19:25] <xubuntu213> no
[19:25] <xubuntu213> espanol english francais
[19:25] <Unit193> xubuntu213: Switch to TTY1 and check for errors?
[20:14] <pedro_> hello
[20:24] <xubuntu293> hello, i want to ask how to configure a tablet, is not working properly
[20:27] <TheSheep> xubuntu293: a wacom tablet?
[20:30] <xubuntu293> sadly no u.u, a genius mousepen, the systems recognizes ok and pointer moves with the pen, but click, buttons and events are not working
[20:35] <TheSheep> xubuntu293: ah, I'm afraid the support for non-wacom tablets is a little patchy
[20:35] <TheSheep> xubuntu293: you might be able to find something if you look for your tablet's model and make on the forums
[20:37] <xubuntu293> i've tryed with wizardpen but dependencies are not compatibles when i try to install it, thanks for help
[20:40] <TheSheep> xubuntu293: you probably already saw https://help.ubuntu.com/community/TabletSetupWizardpen
[20:41] <TheSheep> I see this is quite old
[20:48] <xubuntu293> yeah, i did and i realized xubuntu already recognizes my tablet, but not in an apropiate way, so i wanted to check the configuration files to do it manually
[20:49] <xubuntu293> i checked /dev directory but i did'nt found it, not even in /media
[20:49] <TheSheep> lsusb shows it, right
[20:50] <TheSheep> did you try the settings manager -> mouse and touchpad?
[21:14] <xubuntu293> yes, it is recognized when i use lsusb and appears in settings manager, mouse and touchpad, but there i can only configure device sensitivity, time between clicks and things like that
[21:15] <xubuntu293> i need to configure preasure events and button events
[21:18] <TheSheep> I think that you can at least configure the buttons from the commandline, but I don't have enough knowledge about xmodmap and friends to tell how to do that
[21:22] <xubuntu293> :) xmodmap.... i'll look for information about it, i need as soon as posible to have my tablet working :)
[21:23] <TheSheep> xubuntu293: you can also experiment with the 'input devices' menu in GIMP, Inkscape or MyPaint, whatever you use
[21:31] <xubuntu293> i tryed with gimp an inkscape, the inkscape one was so simple, but it has an event tester
[21:32] <xubuntu293> with gimp, i saw how to configure hotkeys and i configured it as the tablet guide says but non of them work
[21:33] <xubuntu293> was curious that click event works better in inkscape than in gimp (in the menu buttons work properly on inkscape and not in gimp)
[21:37] <TheSheep> xubuntu293: you can test events with xev
[21:44] <Monkeytoe> Hello
[21:48] <Monkeytoe> I just upgraded from 13.04 to 13.10. After the upgrade my digital out no longer works. Is there something I have to do to get it to work?
[21:50] <well_laid_lawn> Monkeytoe:  what do you mean by "digital out" ?
[21:50] <well_laid_lawn> a monitor connection ?
[21:50] <Monkeytoe> optical out on the motherboard
[21:50] <Monkeytoe> for audio
[21:50] <xubuntu293> im doing it, testing events with xev, im gonna keep testing, but is curious the click event with my regular touchpad or mouse has the same code that with tablet, even it is not recognized like that, i'll keep working on it
[21:52] <Monkeytoe> i remember when I set up 13.04 I had to set the bitrate and khz of it
[21:52] <Monkeytoe> through the command line
[21:52] <Monkeytoe> im wondering if the upgrade changed those settings
[21:52] <well_laid_lawn> possible
[21:55] <Monkeytoe> on the volume control for digital output... the horizontal bar that monitors output shows activity... but on the receiver nothing comes through
[21:55] <Monkeytoe> ive also gone into alsamixer and unmuted / maxed everything
[22:14] <holzkeil> hello everyone
[22:15] <holzkeil> may I ask a quick question?
[22:15] <holzkeil> hope this is the right place
[22:16] <Unit193> Depends, if it's an Xubuntu question, just ask and wait for someone to answer.
[23:36] <xubuntu293> hello guyw
[23:36] <xubuntu293> guys, someone knows how to configure buttons?
[23:38] <xubuntu293> i mean, i have to configure a tablet and with xev i realized my tablet's events are button8, button9 and button10, so, how can i link them with their relative events?