[00:13] quick question: I use to have a plasma (plasma-widget-daisy) but on an update it got broken.Since thene i can't remove tyhe plasma from my desktop. I try to install it again and it said i dont have the package libtaskmanager4abi4, and i wasn't able to install the library either ( is not on the repository and i can't install it manualy) so my question is who do i install that library or who can i manualy remove the plasma from [00:13] my desktop === jipang_menjerit_ is now known as jipang_menjerit [01:58] oh dear [01:59] It seems I may have killed plasma-desktop [01:59] how do I uh... restart it [01:59] cuz it wont start when I do it in a terminal [02:01] MangaKaDenza: killall -9 plasma-desktop; sleep 3; plasma-desktop [02:02] blargh [02:02] it didn't work [02:02] QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave. [02:02] plasma-desktop(4096): KUniqueApplication: Cannot find the D-Bus session server: "//bin/dbus-launch terminated abnormally with the following error: No protocol specified [02:02] Autolaunch error: X11 initialization failed. [02:03] Oo [02:03] hmm? [02:03] is that a bad thing? [02:03] that does not sound good at all [02:03] MangaKaDenza: what did you do before plasma disappeared? [02:03] ...I kinda... tried force restarting it [02:03] eg [02:04] kill plasma-desktop [02:04] because it was glitchy [02:04] atm [02:04] define glitchy please [02:04] the icons were blank, and the widgets were slow [02:04] actually... the best solution [02:04] would be to reboot [02:04] :P [02:05] better wait :P [02:05] MangaKaDenza: did you happen to do any updates today? [02:05] why? [02:05] nope [02:05] actually... I've been getting this error [02:05] when I try to update [02:05] the x11 init failed one? [02:06] Error: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ExecFailed: Cannot launch daemon, file not found or permissions invalid [02:06] yeah, there is something wrong with your install :P [02:07] ohdear [02:07] wait... but the updates will still get through, right? [02:07] or what do I have to do? [02:08] hard to say [02:08] well, I'll reboot [02:08] brb [02:10] apachelogger: do you know where are stored the plasmas that kubuntu load on startup? [02:10] juacom99: what do you mean by 'plasmas'? [02:11] apachelogger: plasma-widgets [02:11] i'm gonna copy paste my question so i make sense [02:11] I use to have a plasma (plasma-widget-daisy) but on an update it got broken.Since thene i can't remove tyhe plasma from my desktop. I try to install it again and it said i dont have the package libtaskmanager4abi4, and i wasn't able to install the library either ( is not on the repository and i can't install it manualy) so my question is who do i install that library or who can i manualy remove the plasma from my desktop [02:13] juacom99: you could manually edit the plasma configs `kate ~/.kde/share/config/plasma*` [02:15] apachelogger: the coment is # or // [02:15] # [02:15] thanks [02:15] MangaKaDenza: sudo apt-get install debsums; debsums -s [02:16] MangaKaDenza: that will tell you which files are missing or not what they should be according to the packaging [02:16] ok need to reboot now [02:16] thanks apachelogger [02:16] MangaKaDenza: should help you find the culprit of your errors [02:16] juacom99: no problem [02:16] also.. [02:17] my kmix settings never save [02:17] may be related [02:20] wait wat [02:21] odd... my desktop effects vanished... [02:22] hmm oh wait [02:22] I switched to flrgx... for some reason... [02:22] when did I do that [02:30] http://forum.zentyal.org/index.php/topic,18828.msg73671.html [02:30] similar to what i need [02:30] any ideas? [02:42] blargh [02:43] it still don't work [03:33] how can i set dolphin to display thumbnails for all videos/images? [03:46] James0r: hit the preview button... in the dolphin preferences (wrench in the top right) then go to general [03:47] James0r: depends on if you want it to stick or not but check out the options in there [03:48] wafflejock, yeah did that already. it allowed for image previews but i'm unable to get video thumbnails [03:49] i've installed mplayerthumbs and ffmpegthumbs per some kubuntu threads but still not working [03:49] i have thumbnails on the folders containing video files, but the files themselves are thumbnail-less [03:50] James0r: hmm strange yeah sorry don't use a lot of video here so not sure about that part === goodtime_ is now known as goodtime [03:50] no problem. i'll keep searching the threads [04:02] That icon-only task manager, is it not possible to ungroup same applications? === vincent is now known as Guest58348 === 92AAADQIW is now known as dh64 [07:44] saywahat? [07:44] I thought trusty was like [07:44] way in the future [07:44] how is it in my testdrive ubuntu thingy [07:53] Good morning. [07:53] If I want to autostart e.g. Thunderbird minimized, what command should I use? I know where to get the program autostarted, I just want to start i minimized. === JohnDoe_1 is now known as JohnDoe_DK1 [07:56] JohnDoe_DK1: Not sure if it will work: right-click on the window border -> More Actions -> Special Application Settings -> Size & Position -> Minimized -> Apply Initially. [07:58] lordievader: Thanks, I'll try that. Is it enough to log out or should I reboot to check if it's working? [07:58] Don't think you even need to log out. But I'm not very familiar with window rules. [07:59] lordievader: Okay, I'll check. BRB [08:04] lordievader: It works like a charm! Thanks! :) [08:11] JohnDoe_1: No problem. [10:06] ahhh [10:06] its stuff like this [10:06] that makes me love KDE [10:06] https://www.filepicker.io/api/file/k8kHx6CLRyeyh6NLzESf [10:06] MangaKaDenza: Please don't flood; use http://paste.ubuntu.com to paste; don't use Enter as punctuation. [10:09] !enter | MangaKaDenza [10:09] MangaKaDenza: Please try to keep your questions/responses on one line. Don't use the "Enter" key as punctuation! [10:31] aanyone else having problems with kdevelop and gdb on Ubuntu 13.10 ? (sorry for-xpost) [10:34] eph3meral: I don't have any problems with kdevelop. Don't think I use gdb. [10:35] lordievader, https://bugs.kde.org/show_bug.cgi?id=295085 [10:35] KDE bug 295085 in CPP Debugger "KDevelop doesn't stop at breakpoints" [Normal,Confirmed] [10:35] lordievader, I'm pretty sure I'm suffering from thisi ^ [10:35] eph3meral: Ah, I use kdevelop for python. [10:35] any suggestions on how to fix my system until canonical releases a fix? [10:36] eph3meral: use a different IDE? [10:37] ovidiu-florin, well I haven't been successful in even getting QtCreator to open this cmake project [10:37] lordievader: python doesn't use gdb [10:37] ovidiu-florin, and being on KDE, I do somewhat prefer the ability to use a native client [10:37] ovidiu-florin, what would you suggest instead [10:37] I agree [10:37] I was going to say Qt Creator [10:38] kdevelop has vim mode [10:38] which is awesome - not quite as good as vim but at least it's better than viclipse or whatever [10:38] Qt Creator does to [10:38] two* [10:43] ovidiu-florin: I saw that. [10:44] ciao [10:44] !list [10:44] draha: No warez here! This is not a file sharing channel (or network); read the channel topic. If you're looking for information about me, type « /msg ubottu !bot ». If you're looking for a channel, see « /msg ubottu !alis ». [10:52] ovidiu-florin, hmm, maybe you can help me get this project opened and building in qtcreator [10:52] I can try [10:52] I'd like to give it a try, it just, there were quite a few barriers compared to getting it running in kdevelop [10:52] ovidiu-florin, so it's just a simple OpenGL project in C++ using cmake (and GLFW for what it's worth) [10:53] ovidiu-florin, the first thing was I was require to create a code blocks project file? does that sound right? [10:53] ovidiu-florin, should I create a new project and import the code? or "open" an existing project? [10:53] open an existing one [10:53] and select the CMakeLists.txt file [10:53] the main one [10:54] ovidiu-florin, yeah did that it now says "the directory does not contain a cbp file" and asks me to run cmake and has a button [10:54] but when I click run cmake, "nothing happens" and the "finish" button is still greyed out [10:54] so I can't move forward [10:55] Tools -> options -> Build & Run -> CMake [10:55] find your cmake binary [10:57] ovidiu-florin, ok cool, should I "Prefer Ninja generator" ? [10:58] I don't know. I've never used it === dewdgang_ is now known as dewdgang_frank [11:00] ovidiu-florin, nope, still no love [11:00] what hapens when you press run CMake? [11:03] ovidiu-florin, like I already said "nothing", quite literally [11:03] ovidiu-florin, I ended up having to do it manually on the command line, not even adding the arguments to that wizard seems to work [11:03] try running cmake from konsole [11:03] what's the output? [11:05] ovidiu-florin, well I have the project open now [11:05] now i need to figure out how to build run and debug it === dewdgang_frank is now known as frankie_ [11:05] eph3meral: have you use Creator before? [11:06] ovidiu-florin, nope [11:07] ok [11:07] one moment === frankie_ is now known as frank1e [11:10] hmm, so i guess I got kdevelop to debug [11:11] I think maybe it was as simple as not having build debug symbols [11:12] i feel like X could be running more smoothly/quickly. from this pastebin after installing my graphics driver does it seem like there are major errors i can easily fix http://pastebin.com/fAE6hrKA - kubuntu 13.10 [11:13] ovidiu-florin, anyway I'm still open to trying to use QtCreator for debugging [11:13] ovidiu-florin, not sure how to go about it still [11:13] guys i got weird thigns going on kubuntu [11:13] i tried manjaro and kubuntu 13.10 both just blinks my display [11:14] then installed 13.04 kubuntu, upgraded it...same thing...boot into safe mode, got segmention fault error, press ctrl+c and it boots into desktop [11:14] ovidiu-florin, "The debugger could not load the debugging helper library" [11:14] ovidiu-florin, what up with that? what do I need to install? (just Kubuntu 13.10 here) [11:16] eph3meral: not sure [11:22] ovidiu-florin, https://bugs.launchpad.net/ubuntu/+source/qtcreator/+bug/1233662 [11:22] Ubuntu bug 1233662 in qtcreator (Ubuntu) "Missing debug helpers in QtCreator/can't view STL containers in debugger" [Undecided,Confirmed] [11:22] ovidiu-florin, so yeah, that's why I don't use QtCreator [11:24] i feel like X could be running more smoothly/quickly. from this pastebin after installing my graphics driver does it seem like there are major errors i can easily fix http://pastebin.com/fAE6hrKA - kubuntu 13.10 [11:24] ovidiu-florin, anyway, I kinda like kevelop better anyway [11:53] is there a quick way to determine why OS would be running slowly after fresh k13.10 install and even after update/upgrade. guessing maybe some device driver issue... [11:55] user___ : maybe if it is your first boot, it will take time to index files with nepomuk ... check process using cpu or memory ... maybe network access. [11:55] Joupi: not first [11:57] Joupi: what is the app for process checks [11:58] user___ : the only things I can think of for a slow down are usually : nepomuk, process taking the load, full memory, network or eventually graphics driver. Anything else would be weird else you had a wrong install or incompatible hardware. Check processes with top on a terminal ... [11:58] top? [11:59] ah [11:59] 13.04 didnt have this issue [11:59] yes, open a terminal and type the command 'top' [12:00] Joupi: no more than 50% of cpu is used [12:00] using top [12:00] Oh and I forgot the update proc which usually runs at startup [12:00] what are the main proc running ? [12:01] vlc and browsers [12:01] pulseaudio too [12:01] does that answer your question about main proc [12:01] if you start your system without any apps open, is it slow ? [12:02] actually it might just be opera, i think i need to test more [12:03] if you have some kind of heavy video/flash stuff open in web pages that could be it [12:03] plenty of flash stuff yes, but my system/video card should handle it fine [12:04] my graphic card driver install reported errors, did you see my earlier post? [12:04] not necessarily since all goes through xorg onto the screen afterwards. I have the same problem sometimes when xorg gets overloaded, the system goes to a crawl ... [12:05] no info about your previous post sorry [12:05] i feel like X could be running more smoothly/quickly. from this pastebin after installing my graphics driver does it seem like there are major errors i can easily fix http://pastebin.com/fAE6hrKA - kubuntu 13.10 [12:05] ^^ [12:05] I suggest you uninstall your proprietary driver then and try again [12:06] can you tell me what steps one would take to do that [12:06] OK I see, do an apt-get remove purge all nividia stuff and do a clean install [12:06] apt-get uninstall? [12:07] when you reinstall on top you still keep the old crapy stuff [12:07] so, clean install and don't use ati-amd driver for my card at all? [12:08] i was hoping that a couple more packages installed might make the driver work ok [12:08] but from what you see, i should avoid the driver altogether? [12:09] I see an error message saying : kernel module version mismatch. I believe either your install went wrong or you have an incompatibility somewhere [12:09] try to use the free graphics driver first and see if it works [12:10] if it works, then try a clean reinstall of your proprietary driver [12:10] Joupi: by free graphics driver you mean the one preinstalled with k13.10 [12:10] ? [12:10] yes [12:10] that does work [12:10] well [12:10] in 13.04 [12:10] that's clear then [12:10] assuming same one [12:11] normally when you install system, the proprietary driver is not installed by defaults, you have to install afterwards [12:11] Joupi: yeah, i was hoping the prop driver would yield a boost in performance, i just want to get it working right [12:12] then if you need your proprietary driver, you should first purge completely the old install, check the correct driver to install (providing you know which one you need) and redo a clean install [12:12] proprietary does not always lead to improved perf ;-) [12:15] Joupi: i don't know if i can improve installation conditions for the prop driver. this was clean install (not upgrade from 13.04), and i installed the prop driver without --force due to missing package dependencies. the best thing i could think to do would be new fresh install of 13.10 followed by installation of packages that the errors in the pastebin might be resolved and then finally installation of the prop driver itself, what do you think? [12:16] I believe yes, but 2 things : [12:17] 1- check prop. drivers in the update, you should have the one you need after clean system install [12:17] 2- make suer all dependencies are there else you will fail again === adrien_ is now known as Guest10519 === Steakanbake|slee is now known as Steakanbake [12:47] from this http://pastebin.com/fAE6hrKA what dependencies does it appear are missing === Vito_ is now known as Vito [13:39] can't seem to get wake on keyboard working from sleep state [13:40] trying to toggle cat /proc/acpi/wakeup doesn't work. unaffected by echo USBX > /proc/acpi/wakeup command [13:51] is it possible that networkmanager is broken on kubuntu 13.10? === Steakanbake is now known as Steakanbake|slee [14:03] Howdy folks === Doyle_ is now known as Doyle [14:47] i have hdmi cable plugged into audio/video receiver, when i boot into desktop i get wrong resolution what should i do [14:49] jarkko. to what kind of monitor is the receiver connected? [14:50] i have normal pc display with dvi connector [14:50] but i need to use hdmi with audio/video receiver to get sounds [14:50] this is not issue with amds own drivers [14:51] kubuntu sees only 1 display [14:53] jarkko. what about spdif output from the pc to the receiver for audio [14:53] dont have cables [14:53] better to use amds drivers then [14:54] but i would like to test the speed of open source drivers [14:54] no RCA audio cable for the coax audio out ? [14:55] and what does the hdmi have to do with your resolution if you use a dvi from the pcx to the monitor [14:55] exactly [14:55] what does it do [14:55] but it does [14:56] does what ? [14:56] it changes the resolution unreable [14:56] changes the resolution something liek 1024x1080 [14:56] or something [14:57] how , that doesn't make sense , if the receiver video out isn't connected to the monitor [14:57] well it does it [14:57] it sees itself somekind of display [14:58] i have had this issue before and it seems they havent done anything about it [14:58] then disconnect the hdmi to the receiver and use the coax audio out to the receiver with an ordinary rca cable [15:02] anyway , I have to go ...BBL === spawn[dead] is now known as spawn57` [16:26] where is the configuration directory for preinstalled libreoffice for kubuntu 13.10? nothing under /home//.config/ or /home//.libreoffice [16:27] where is the configuration directory for preinstalled libreoffice for kubuntu 13.10? nothing under /home//.config/ or /home//* [16:28] sdafj32r: we don't ship a config for libre office [16:28] whatever the defaults are used [16:28] possibly there are some patches to the config in the package [16:28] no clue [16:29] shadeslayer, what are the defaults is my question [16:29] no, your question was where [16:29] "Where is the configuration directory" [16:30] default config dir [16:30] I have no clue *what* the defaults are [16:30] I have my user config in ~/.config/libreoffice/4/user/ [16:30] k just going to reinstall it [16:32] Now I'm not saying I don't like kubuntu... [16:33] but theoretically... how does one install the KDE (sounds weird... the KDE.. (K Desktop Environment) ), on another distro [16:39] MangaKaDenza: Perhaps ask them in #kde :) [16:40] yeah or the particular distro, the answer varies from distro to distro [16:41] Yes, the process in Gentoo for instance would be vastly different than say for instance, Centos [16:41] ^^ [17:01] * genii slides Duel a coffee [17:06] hello there. I'm running kubuntu 12.04 and I want to install the app 'Nitro' but I can't find a way, it's not in the software manager. https://apps.ubuntu.com/cat/applications/saucy/nitro/ [17:06] i've added the saucy repos just in case [17:06] including the extras [17:07] Nine_9: What does this program Nitro do? [17:07] genii todo list [17:07] Nine_9. , adding other OS repos is not a good idea [17:07] :o [17:08] BluesKaj: well, I made that in a desperate attempt to install that software [17:08] installing software used to be a breeze few years ago [17:08] well ,you;'ll be desperate to fix your system soon if youi continue with it [17:09] `so what is nitro Nine_9 ? [17:09] BluesKaj: I just want to install Nitro, it's a todo list app [17:09] :D [17:09] why won't you tell us what is is [17:10] it is [17:11] TODO LIST! >:B [17:11] https://apps.ubuntu.com/cat/applications/saucy/nitro/ [17:11] ok [17:11] uh oh [17:11] I accidentally my touchpad [17:12] disabled my touchpad [17:12] also, the lts versions aren't receiving much love as in the past. some stuff are very outdated. [17:13] I'm gonna check tasque as an alternative at the moment :( [17:14] The apt link they provide which is supposed to load up the packagemaneger is Ubuntu-specific, unfortunately. === spawn57` is now known as spawn[dead] [17:16] heck... ubuntu is getting worse rapidly, unfortunately kubuntu is on the same boat :( it seems the kubuntu guys are good and stuff, but kubuntu always gets some backfire :( === Jikan is now known as Jikai [17:17] I've always used LTS versions and they used to be great and somewhat uptodate. nowadays they're kinda abandoned [17:19] tasque isn't as good :( [17:20] man, i can't find a decent (offline) task/todo list app. [17:22] nowadays everything is online, I hate online productivity apps. [17:22] I use the kontact suite, works well for me [17:27] sgclark: thanks, but I want something minimalistic. [17:27] maybe kate? :B [17:45] nevermind, although not perfect, gtodo does the trick for the moment === Steakanbake|slee is now known as Steakanbake [18:08] Salve a tutti comunità di ubuntu [18:09] !it [18:09] Vai su #ubuntu-it se vuoi parlare in italiano, in questo canale usiamo solo l'inglese. Grazie! (per entrare, scrivi « /join #ubuntu-it » senza virgolette) [18:09] ok === Steakanbake is now known as Steakanbake|slee [18:29] dsgf === Steakanbake|slee is now known as Steakanbake [18:29] Zarat: Yes, we see what you type :) === turgay_ is now known as turgay [18:34] Haalo [18:34] * genii waves at Duel [18:34] Welcome to #kubuntu, Duel [18:35] Duel: So if you added now the repository which the fastboot package is in, you should be able to install it now. [18:38] Anyone help? I enabled QTCurve to Enable this windows 2000 look but it didnt do anything. [18:42] Duel: Now you need to go to System Settings...Application Appearance...GTK... and tell it to use a theme like oxygen-gtk and to use also the icons from that theme, and save, etc [18:43] genii, Okay I Enabled GTK+ Style in the widget sstyle tab now? [18:44] OMG I <3 plasmate [18:45] ? [18:46] genii, Whelp that did do anything? [18:46] Duel: May not see the change until next time you log in [18:46] genii, So ‪under widget style I pick GTK right? [18:47] genii, Where did it go? I dont have the option anymore [18:48] please help a noob: I downloaded a tar.gz. How do I install it? [18:49] Duel: Widget style under the "Style" selection should stay the same as it was before (usually Oxygen). === travis is now known as Guest74280 [18:50] JohnDoe_DK: It is not the recommended way to install anything in *buntu systems. What is it you are trying to install? === Guest74280 is now known as Duel [18:50] JohnDoe_DK: Depends, a tar.gz is a compressed file. To exctract it run in a terminal: tar -zxvf .tar.gz [18:50] genii, Hey I logged off and back on, still no change? [18:50] its Pidgin SIPE from here: https://launchpad.net/ubuntu/+source/pidgin-sipe/1.16.1-1 [18:50] JohnDoe_DK: But like genii says, there are easier ways to install software in Ubuntu. [18:51] genii, Hold up brb [18:51] !info pidgin-sipe [18:51] pidgin-sipe (source: pidgin-sipe): Pidgin plugin for MS Office Communicator and MS Lync. In component universe, is optional. Version 1.16.1-1 (saucy), package size 306 kB, installed size 1128 kB [18:51] JohnDoe_DK: "sudo apt-get install pidgin-sipe" installs it, no need to mess with sources. [18:52] genii, Yea still nothing. [18:52] Duel: Widget style under the "Style" selection should stay the same as it was before (usually Oxygen). The changes you want to make are in the GTK section on the left pane, where you then select the GTK2 and GTK3 themes to be oxygen-gtk [18:52] I dont have that?. [18:52] Oh, didn't know it was in the repository... [18:53] JohnDoe_DK: Apt-cache is a usefull utility for searching the repos. See "man apt-cache". === travis_ is now known as Duel [18:53] genii, I jsut have on the left side vertically Style,Colors,Icons, Fonts, and Emotions? [18:54] lordievader: Ok thanks dude :) [18:54] travis_: May need to install additional packages of gtk2-engines-qtcurve or kde-style-qtcurve or kwin-style-qtcurve ( It's been a long time since i did this operation, so I forget which exactly is the correct package) [18:55] genii, soo? what one should I get [18:55] Duel: Won't hurt to install all of them even. [18:55] okay [18:56] Work needs me, away from computer a bit. [18:57] genii, Got all of them [18:57] genii, Dont leaave mee [18:59] lordievader: Do you know SIPE? and how to use it? [19:01] JohnDoe_DK: Nope. Sorry. [19:02] lordievader: OK [19:03] Anyone know how I can get my GTK to work? [19:07] Duel: Don't worry, I won't abandon you. Just that my boss lets me be here on IRC but my work must take precedence, so I am away from the computer often. [19:07] genii, oh okay.. but I sudo'd those you posted and I already have them. [19:08] Duel: I'll post a screenshot of what it should look like, hangon [19:11] okay [19:12] Duel: http://imagebin.org/index.php?mode=image&id=277760 [19:12] genii, Yes I dont have that.. [19:13] Duel: Do you have "kde-config-gtk-style" installed? [19:13] Idk.. [19:14] Duel: dpkg --get-selections|grep "kde-config-gtk-style" [19:14] If that returns "kde-config-gtk-style install" then it is installed. [19:14] lordievader, Im installing it atm. [19:14] lordievader, Okay its done? [19:15] lordievader, yay its there [19:15] lordievader: You're going to gain weight with so many helper snacks.... [19:15] !helpersnack | lordievader [19:15] lordievader: Wow! You're such a great helper, you deserve a cookie! [19:16] I'm afraid I'm getting addicted to them :( [19:16] :) [19:16] Lovely factoid though. [19:16] lordievader, Okay but it doessnt change anything? [19:17] Duel: Have you set it as the screenshot of genii and logged out and in? [19:17] Duel: Might want also gtk2-engines-oxygen and gtk3-engines-oxygen [19:17] ( if not already installed now ) [19:18] genii, Installing gt2 [19:19] lordievader, what you mean set it as a screen shot? [19:20] Duel: genii gave you a screenshot of how it should be set up. [19:20] genii, re link please? [19:21] Duel: http://imagebin.org/index.php?mode=image&id=277760 [19:22] lordievader, Okay yes i got it now [19:22] brb [19:23] How do I change the metric value on networks (two nics) on Raring? Setting a value in network-manager doesn't seem to make any difference. [19:25] lordievader, now say If i download a theme how do I use it? [19:26] Duel: Depends on the theme. Usually in the theme selector in the Sysconfig window there is a button to download new themes. That is probably the easiest. [19:27] lordievader, In the appearance ? [19:28] lordievader, Found it and Does it matter what type of theme I get? [19:28] Duel: For example: System Settings -> Workspace Appearance -> Desktop Theme -> Get New Themes. [19:28] Duel: What type? What do you mean? [19:29] lordievader, Never mind that, But how do I set it? Where the oxygen-gtk theme is i just set it to the one I downlaoded?> [19:30] Duel: The usual theme for Kubuntu is Oxygen, so for the GTK settings you should put oxygen-gtk so that it matches your Kubuntu when you open for instance Firefox or other non-KDE stuff [19:30] Duel: I'm confused. What is your current problem and status. [19:30] oh okay. [19:30] lordievader: Ubuntu Software Center looks fugly :) [19:30] genii: No wonder, its the Ubu Software Center :P [19:32] ubuntu the dark secret of kubuntu... [19:32] lordievader, This is my current top, http://imgur.com/GYLQhmg [19:34] Is there anyway I can set terminal to ALT+t? [19:35] Duel: System Settings -> Shortcuts -> Somewhere (I usually make a custom one). [19:35] Duel: Is there anything wrong with that screenshot? [19:35] lordievader, Not really but I feel I need something more lol. [19:36] lordievader, For the Shortcut type what would i put? [19:36]