[06:36] <pitti> Good morning
[08:03] <jibel> Good morning
[09:31] <slickymaster> morning all
[14:45] <Bamberrouse> Lel all of you will love it xD http://p.pw/DLV
[15:06] <pitti> jibel: whoops, "adt-run not found" -> broken VMs? (spew of new adt failures)
[15:07] <pitti> jibel: I'll have a look in a few
[15:07] <pitti> jibel: ah sorry, that's on albali, I have no su there; could you rebuild the VMs?
[15:08] <pitti> alderamin too, I'll do that one
[15:08] <jibel> pitti, looking
[15:09] <jibel> pitti, we could reprovision everything because it is possible that it didn't end up well this morning due to connectivity issues with ftpmaster
[15:09] <pitti> jibel: probably the VMs failed to build due to the cache server being AWOL?
[15:09] <jibel> yes
[15:10] <jibel> pitti, I started a full reprovisioning
[15:11] <pitti> jibel: ah, thanks; shold I cancel my prepare-testbed runs on alderamin and aldebaran?
[15:12] <pitti> jibel: right, should have thought about running setup-testbeds instead of sshing..
[15:15] <jibel> pitti, you can cancel but it doesn't hurt, last to finish will overwrite previous build.
[15:34] <pitti> jibel: aldebaran and wazn confirmed working; rebuilding VMs on alderamin again (broken, and there were no running jobs; I probably confused it with my manual build)
[15:34] <pitti> jibel: I can't check albali
[15:36] <jibel> pitti, I'm testing on albali
[15:38] <jibel> pitti, works on both archs
[15:40] <pitti> jibel: thanks; I temporarily disabled alderamin, jobs keep failing there (Vms still building)
[15:40] <jibel> argh
[15:40] <jibel> I'll restart them again
[15:42] <pitti> I also retried a few
[15:42] <pitti> WTF
[15:44]  * pitti cleans caches and rebuilds VMs again
[15:46] <jibel> pitti, what is failing?
[15:46] <pitti> still "adt-run not found"
[15:47] <senan> balloons,DanChapman Good Eve!!!
[15:47] <balloons> good eve senan
[15:48] <jibel> pitti, for r-cran-spatstat or another?
[15:48] <jibel> this package ran on alderamin
[15:48] <senan> DanChapman, I resubmitted the MP :-) can you please check it
[15:48] <pitti> jibel: even for -l
[15:48] <pitti> jibel: hm, do you know why "alderamin" gets adt jobs? I thought they were only for alderamin-adt
[15:49] <jibel> pitti, that's virtual jobs jenkins creates to aggregate results of matrix jobs
[15:49] <jibel> pitti, they don't have a slot associated
[15:49] <pitti> ah
[15:51] <jibel> I think they should not be displayed at all, it only confuses everyone, but it is not new with jenkins' UI
[15:54] <pitti> ah, the flood of "fixed" mail
[15:57] <pitti> jibel: alderamin-adt back online
[15:59] <jibel> pitti, good, thanks. Britney is waiting for ceph and pyqt5, and they should be collected on next run
[15:59] <senan> balloons, how jenkins work ?
[16:01] <balloons> senan, link to your mp?
[16:03] <senan> balloons, did you mean the DiskUsageAnalyzer bzr url ?
[16:03] <balloons> I meant https://code.launchpad.net/~senan/ubuntu-autopilot-tests/DiskUsageAnalyser/+merge/203231
[16:04] <elfy> balloons: you want me to sync those changes from yesterday? or you doing a bunch of stuff?
[16:04] <balloons> elfy, I always sync things after pushing them.
[16:04] <balloons> I saw some xfce stuff too that I synced. Likely you had already done so I'd guess
[16:05] <elfy> well those changes I did are merged but not on the tracker is why I mentioned it
[16:05] <balloons> I assumed as such.. so it's making me wonder. I knocked myself half conscious yesterday.. long story, so perhaps I didn't do what I think I did :-)
[16:06] <elfy> okey doke - so shall I do them - I'm looking at it now anyway :p
[16:06] <balloons> senan, I would add a commit message and description to your merge
[16:06] <balloons> elfy, yes please
[16:06] <balloons> or well
[16:06] <balloons> i'll do it
[16:07] <elfy> dude ...
[16:07] <knome> yeah, make up your mind ;)
[16:07] <balloons> haha
[16:07] <balloons> well, I checked my terminal tab where I had done the work.. the command was sitting there, waiting to hit enter
[16:07] <senan> balloons, how do I find it... :(
[16:08] <balloons> I see I pushed Xfce4 settings tests, xubuntu power, etc
[16:08] <balloons> then I was ready to push the upgrade tests.. but apparently didn't
[16:08] <knome> ;)
[16:08] <balloons> hey knome ;-) I got the new icons, I'll apply them after I finish this testcase
[16:08] <senan> https://code.launchpad.net/~senan/ubuntu-autopilot-tests/DiskUsageAnalyser/+merge/203231
[16:08] <elfy> balloons: don't try and make it seem better with shiny :p
[16:09] <balloons> senan, at the top of the proposal there are buttons for it
[16:09] <balloons> I was just trying to save elfy some work
[16:09] <balloons> truly
[16:10] <elfy> lol
[16:10] <senan> balloons, who is going to review the code ?
[16:10] <elfy> as long as they get done - I shall check :)
[16:11] <balloons> senan, well I'd suppose Dan is a good canindate, but if he is unable I'll have a look
[16:11] <DanChapman> hey senan and balloons :-)
[16:11] <senan> DanChapman , Hey
[16:11] <balloons> right on time :-)
[16:11] <DanChapman> sorry was hibernating ;-p
[16:12] <elfy> as if by magic the shopkeeper appeared
[16:12] <balloons> funny how that works
[16:12] <DanChapman> senan just pulling your branch now
[16:13] <senan> DanChapman, Thanks :{D
[16:15] <senan> balloons, what the use of jenkins ?
[16:15] <balloons> senan, the tests run in jenkins after they are merged and promoted to the production branch
[16:17] <senan> balloons, means after every daily build, the tests run automatically ?
[16:17] <balloons> that's the goal ;-)
[16:18] <senan> balloons, ubuntu builds will be deployed automatically in some lab machines and run the tests ?
[16:25] <balloons> everyday before releasing the daily image, the images are built and installed using preseed tests and now autopilot tests for ubiquity as well. Afterwards post-install tests are run
[16:29] <pitti> jibel: did you get a "fixed" notification for upstart & ubiquity? I didn't
[16:30] <jibel> pitti, no I didn't
[16:30] <pitti> meh
[16:30] <pitti> our infrastructure hates me this week
[16:33] <jibel> pitti, from the console output "No emails were triggered"
[16:34] <jibel> pitti, may be because previous build has been aborted, but it is surprising
[16:34] <DanChapman> senan, Done! :-D i've left a few comments
[16:35] <senan> thanks Dan
[16:40] <senan> DanChapman, I didnt understand the formatting you mentioned
[16:42] <DanChapman> senan for instance look at the indentation difference between test_window_title (using 4 spaces) and test_scan_local_folder (using 8 spaces)
[16:44] <senan> DanChapman, I am using geany, I didnt find any difference
[16:50] <senan> DanChapman, I'm sorry.. I'm still confused as I didnt find any difference
[16:51] <balloons> senan, I use geany as well. check settings preferences indententation
[16:51] <balloons> set the width to 4, type spaces, and uncheck detect width from file
[16:52] <balloons> then if you open everything, we can regex look for 8 spaces and replace with 4 spaces
[16:52] <balloons> save and you should be set ;-)
[16:53] <senan> balloons, it was already set to 4 spaces
[16:53] <senan> and width from file is unchecked
[16:57] <senan> balloons, danchapman, I did the regex to replace chars, but visually I couldn'r find any difference
[16:57] <balloons> senan, well, no worries. spacing can be fixed easily enough
[16:58] <balloons> if it's not alreadu
[17:28] <cgoldberg> balloons, senan :  https://pypi.python.org/pypi/autopep8/
[17:28] <cgoldberg> sudo apt-get install python-autopep8
[17:28] <cgoldberg> $ autopep8 foo.py
[17:28] <cgoldberg> .. spacing fixed
[17:29] <cgoldberg> it's like tidy, for python
[17:30] <cgoldberg> ... and if you don't like automagic tools, use flake8 to check for adherence to pep8 (style guide)
[17:32] <DanChapman> cgoldberg: nice one thanks :-). I've always used flake8
[17:37] <senan> Good Night All!!!
[17:37] <senan> DanChapman, Balloons, good Night
[17:43] <balloons> senan, good night
[21:14] <balloons> letozaf, howdy
[21:15] <letozaf> balloons, hi
[21:15] <balloons> want to have a go at the evernote tests again? i'll have a branch for you to try in a momen
[21:18] <letozaf> balloons, yes
[21:21] <balloons> let me try rebasing too
[21:21] <balloons> letozaf, lp:~nskaggs/reminders-app/fake-oauth-for-ap
[21:23] <letozaf> balloons, ok let me try it :)
[21:23] <balloons> letozaf, lol, the tests fail. but it will auth. I hope so anyway.
[21:24] <letozaf> balloons, :P let me see what happens, just a moment
[21:25] <letozaf> balloons, :? what happended ?
[21:25] <letozaf> 22:24:40.835 INFO run:62 - Autopilot Source Version: 1.4.0
[21:25] <letozaf> Autopilot Package Version: 1.4+14.04.20140123.1-0ubuntu1
[21:25] <letozaf> Loading tests from: /home/letozaf/autopilot-tests/fake-oauth-for-ap/tests/autopilot
[21:25] <letozaf> Tests running...
[21:25] <letozaf> Ran 0 tests in 0.000s
[21:25] <balloons> lol
[21:25] <balloons> use -v.. an error happened
[21:26] <letozaf> balloons, ahhh!! let me try
[21:26] <letozaf> balloons, funny I have the same output :?
[21:27]  * letozaf is thinking if she has someting missing 
[21:28] <balloons> letozaf, autopilot list
[21:28] <balloons> the tests are not running. there is an error, or there is no test to run
[21:29] <letozaf> Loading tests from: /home/letozaf/autopilot-tests/fake-oauth-for-ap/tests/autopilot
[21:29] <letozaf>  *1 reminders_app.tests.test_reminders.TestMainWindow.test_download_list_of_notebooks
[21:29] <letozaf>  *1 reminders_app.tests.test_reminders.TestMainWindow.test_logon_to_Evernote
[21:29] <letozaf>  2 total tests.
[21:30] <balloons> pick a specific one to run
[21:30] <letozaf> balloons, ok
[21:31] <letozaf> balloons, yes it fails
[21:31] <letozaf> balloons, with an error
[21:31] <letozaf> balloons, UnboundLocalError: local variable 'content_dir' referenced before assignment
[21:32]  * letozaf is looking at the code
[21:35] <balloons> fun
[21:35] <balloons> I rebased it, so i'll have something better in a second
[21:36] <balloons> ugh this is broken
[21:37] <letozaf> balloons, :)
[21:38] <balloons> k pushing
[21:38] <letozaf> balloons, ok
[21:39] <balloons> ok, so the base branch seems much different than your branch
[21:39] <balloons> lp:~nskaggs/reminders-app/oauth-ap
[21:39] <balloons> the tests don't actually work, but it does auth for me
[21:39]  * letozaf is trying ...
[21:39] <balloons> oO.. I should merge the changes you made to qml.. that's the missing piece
[21:41] <balloons> letozaf, it backs up and reverts your online accounts, so don't kill it early or you'll be left with no accounts :-)
[21:41] <letozaf> balloons, this time reminders app started, but do not think it logged on
[21:42] <letozaf> balloons, ok thanks, but it doesn't matter on my notebook I have nothing important
[21:42] <balloons> ahh
[21:42] <balloons> i'm merging your qml changes, one moment
[21:42] <balloons> I had/have like 4 versions of this running around
[21:42] <letozaf> balloons, :D
[21:45] <balloons> ok, merged your qml changes too
[21:46] <letozaf> balloons, ok, let me try again
[21:46] <balloons> still fails.. wild
[21:46] <balloons> not oauth, but finding the qml stuff
[21:47]  * letozaf is trying
[21:48] <letozaf> balloons, yes it's true :?
[21:49] <balloons> well, I was having other errors anyway that were a bit off. Anyways these should be easy enough to solve
[21:49] <balloons> your qml changes are indeed in the branch so
[21:51] <letozaf> balloons, ok I will give it a try :)
[21:56] <letozaf> balloons, I will be back tomorrow for this ok ?
[21:56] <balloons> letozaf, no worries. Can you confirm if you run a test and simply click my account it pulls notes?
[21:56] <balloons> if so, the proof of concept is sound
[21:57] <balloons> the test will fail, but do you see an account, and if you click it, a note?
[21:57]  * letozaf is trying
[21:58] <letozaf> balloons, yes I can confirm that clicking the account shows all my notes
[21:58] <letozaf> balloons, let me click a note now
[21:59] <letozaf> balloons, yes when I click a note I enter it and see it's contents
[21:59] <balloons> letozaf, when you run the test you should see "theendstartswithzero" as the only account
[21:59] <letozaf> balloons, yes I confirm
[22:00] <balloons> wow.. ok, so good.. then the hackery with oauth works
[22:00] <letozaf> balloons, my Evernote account in accounts does not show up
[22:00] <letozaf> balloons, fine
[22:00] <balloons> awesome.. ciao
[22:00] <balloons> ty
[22:00] <letozaf> balloons, yw
[22:00] <letozaf> balloons, ciao