[01:28] <jonathan2> i've installed a printer driver and "print test page" claims to complete successfully. the printer doesn't do anything, though. anybody have any thoughts? lubuntu 13.10, canon mf3010
[01:28] <jonathan2> nothing that looks useful in the cups log, even with debug log level
[15:25] <trix> hi. when i type "sudo apt-get upgrade" in the console there are 3 packets that are kept back
[15:25] <trix> linux-generic, linux-hearder-generic and linux-image-generic
[15:25] <trix> why is that so?
[15:29] <wxl> trix: it means the dependencies have changed since
[15:29] <wxl> trix: you need to dist-upgrade to fix it
[15:30] <wxl> trix: more specifically it means the dependencies now include something they didn't previously
[15:30] <wxl> trix: upgrade never adds new packages that you have not explicitly requested
[19:48] <sasha|> O hai. I'm still having issues with booting (can't log into my account), so I tried to do a fsck check, and then it stopped with the following: i.imgur.com/MZQN1vf.jpg
[19:48] <sasha|> This is in recovery mode. I have a feeling this may have something to do with a damaged hard drive?
[19:49] <sasha|> When I boot normally, a terminal flashes briefly with irrelevant (collectd database error) message, and then goes back to the login screen
[19:50] <wxl> sasha|: go back into recovery and see what /var/log/syslog or /var/log/dmesg have to say
[19:56] <sasha|> well I can't seem to upload it to sprunge because I can't load the network...
[19:56] <sasha|> which part are you looking for in particular wxl ?
[20:12] <sasha|> wxl, I copied dmesg and syslog to a USB stick and uploaded them to pastebin: http://pastebin.com/WZRU52xQ (dmesg)
[20:12] <sasha|> and http://pastebin.com/5qKyjsn8 for syslog
[21:20] <wxl> nothing obvious there, sasha| ; try X.org.log
[21:20] <sasha|> 1sec
[21:21] <sasha|> it has done i.imgur.com/MZQN1vf.jpg again whilst idling in tty since I last spoke here wxl
[21:23] <wxl> correct me if i'm wrong but you can get to the login screen in general without troubles, right, sasha| ?
[21:23] <sasha|> yeah
[21:23] <wxl> then i'm guessing the problem is with X
[21:23] <sasha|> however if I recall correctly, normally there shouldn't be a login screen, it should boot directly
[21:24] <wxl> assuming this is not a live system (it doesn't appear to be), it shouldn't boot directly unless you've set it up that way
[21:25] <sasha|> afaik I set it up that way, it acts as a home server
[21:32] <wxl> even still, probably an X problem; send the log file over, sasha|
[21:32] <sasha|> yeah hold on a sec I can't get it to boot :P
[21:36] <jirido> Sorry i ask so abrupt but I would need to know how i get the actual screen resolution when in console
[21:36] <jirido> If some one are in a mood!
[21:40] <sasha|> I have 4 wxl, xorg.0.log, xorg.1.og and .old for both of those too
[21:43] <sasha|> wxl, here's Xorg.1.log: http://sprunge.us/SChD
[21:52] <acidfu> moo !
[21:52] <acidfu> how do I change the timezone of lubuntu ? someone can point me in the right direction please  ? thank you
[21:59] <wxl> !time
[21:59] <wxl> nope :)
[21:59] <wxl> sasha|: give me the 0.log
[21:59] <wxl> !timezone
[21:59] <wxl> !locale
[21:59] <sasha|> wxl, http://sprunge.us/eTZS
[21:59] <wxl> try that, acidfu ↑
[22:00] <acidfu> I finally did that : sudo dpkg-reconfigure tzdata
[22:00] <acidfu> :/
[22:00] <Unit193> `tzselect`
[22:01] <wxl> sasha|: try booting with acpi=off and see if that helps
[22:02] <sasha|> man... I just got it to work for the stuff I want
[22:02] <sasha|> but where do I set it to acpi=off?
[22:04] <wxl> sasha|: in the grub settings
[22:04] <wxl> !grub | sasha|
[22:05] <sasha|> so basically I add it as a line to /boot/grub/grub.cfg ?
[22:07] <wxl> sasha|: no you can edit it when you boot at the main screen
[22:07] <wxl> hold down shift when you boot
[22:07] <wxl> sorry if i'm kind of distracted; work :(
[23:43] <harris> hey
[23:50] <jirido> Hi there again.. I dont know if it was that i tried to look film in console or what but now my viewport is bigger then my screen and nvida-settings start with segmentation fault.. I'v tried to reinstall and tried to log in with different window manager, arandr displays right values..im a litle lost.. help pleace