[00:22] <STiK> +1 to that johnjohn101
[00:34] <dog-food> i'm trying to change mac address but macchanger -r eth0 keeps the same address every time
[00:34] <dog-food> it worked in 13.10
[00:35] <dog-food> also if I disconnect the ethernet wire ubuntu restores the old mac address
[00:35] <dog-food> that didn't happen earlier
[01:27] <Lorith[Alpha]> anyone up
[01:27] <Lorith[Alpha]> ?
[05:19] <akiva-mobile> trying to build unity8, but I am getting this error:
[05:19] <akiva-mobile> CMake Error at CMakeLists.txt:64 (message):Could not determine plugin installation dir.
[05:20] <akiva-mobile> not much experience with cmake; is there an option I can set here?
[05:20] <akiva-mobile> Google is not giving me too much luck.
[05:41] <basketball> how do i change dns
[07:01] <greyhatpython> hi i upgraded to Ubuntu 14.04 development release, Ubuntu automatically locks the screen while using the system, any help?
[07:03] <akiva-mobile> greyhatpython, you mean, it goes to the lockscreen?
[07:03] <akiva-mobile> where you have to input a pw?
[07:04] <greyhatpython> exactly!
[07:04] <greyhatpython> yes
[07:04] <akiva-mobile> wow that's annoying
[07:04] <akiva-mobile> sorry for the obvious question
[07:04] <akiva-mobile> but did you try disabling it in the settings?
[07:05] <greyhatpython> yes it even doesn't recognise my ethernet connection after two restarts it detects my net connection.
[07:05] <akiva-mobile> should be under power, and screen.
[07:05] <akiva-mobile> really?
[07:05] <akiva-mobile> wow, what are you running?
[07:05] <greyhatpython> checking
[07:05] <greyhatpython> Power selected as never suspend
[07:06] <greyhatpython> it happens even if i run any program like firefox, google chrome ...etc
[07:07] <akiva-mobile> greyhatpython, and what about your screen settings?
[07:07] <akiva-mobile> brightness and lock *
[07:07] <greyhatpython> well i didn't change anything
[07:08] <greyhatpython> i just upgraded from 13.10 to 14.04
[07:09] <akiva-mobile> greyhatpython, I never do upgrades... if I can avoid it.
[07:09] <akiva-mobile> unless its a rolling release.
[07:09] <akiva-mobile> consider fresh install?
[07:09] <greyhatpython> i can but it also means i am testing right?
[07:10] <akiva-mobile> greyhatpython, I suppose. canonical would appreciate it
[07:10] <akiva-mobile> especially if you submit bugs
[07:10] <greyhatpython> what you mean rolling release?
[07:10] <akiva-mobile> as this is the most important long term release
[07:10] <akiva-mobile> oh a rolling release is that you are constantly updated to the latest
[07:11] <akiva-mobile> ubuntu has a 6 month release
[07:11] <greyhatpython> hmmmm
[07:11] <akiva-mobile> with long term releases every 2(?) years
[07:11] <greyhatpython> i know that!
[07:12] <akiva-mobile> greyhatpython,  there was some talk about moving ubuntu to rolling. don't think it panned out
[07:13] <greyhatpython> ok!
[07:14] <akiva-mobile> greyhatpython, I always find that reinstalling is always faster than fixing x wierd os issue from updating
[07:16] <greyhatpython> even i do but installed i need to re-install that's the problem
[07:18] <greyhatpython> i mean the installed apps
[07:18] <akiva-mobile> pardon?
[07:19] <greyhatpython> i mean i need to re-install the apps which i have already installed if i do fresh install
[07:20] <akiva-mobile> greyhatpython, ubuntu is getting good with that now though,
[07:20] <akiva-mobile> that you can basically create a profile
[07:20] <greyhatpython> how?
[07:20] <akiva-mobile> and have it done automatically
[07:20] <akiva-mobile> I THINK... through ubuntu one
[07:20] <akiva-mobile> and I could be mistaken...
[07:22] <akiva-mobile> oh wait.. its through that application... shoot what is it called...
[07:26] <akiva-mobile> landscape!
[07:27] <akiva-mobile> https://landscape.canonical.com/
[07:27] <akiva-mobile> greyhatpython, ^
[07:29] <greyhatpython> you mean ppa?
[07:32] <plasma> since nobody reacted on my question
[07:32] <plasma> where do i have to file bug reports?
[07:34] <akiva-mobile> plasma, oh hey
[07:34] <akiva-mobile> plasma, launchpad. Do you have an account?
[07:34] <plasma> nope
[07:34] <akiva-mobile> plasma, https://launchpad.net/
[07:34] <akiva-mobile> plasma, its great; you can host your own code there too
[07:34] <akiva-mobile> plasma, Are you wanting to get into programming?
[07:38] <plasma> akiva-mobile: no i quitted programming long time ago
[07:38] <plasma> doesnt have the nerves for that anymore ;)
[07:38] <akiva-mobile> plasma, ha ha, fair enough
[07:39] <akiva-mobile> plasma, sounds like you were using c++
[07:39] <plasma> yeah :D
[07:39] <plasma> HOW DID YOU GUESS IT? ;D
[07:39] <akiva-mobile> plasma, I know your pain.
[07:39] <akiva-mobile> plasma, I never got good at pointers
[07:49] <plasma> i have to make breakfast now
[07:49] <plasma> fuckin hungry
[07:49] <akiva-mobile> plasma, after too much c++, i try to use python for a bit
[07:49] <akiva-mobile> makes me happy
[07:50] <plasma> yeah i didnt find the time yet to dig into it
[07:50] <plasma> but its on my todo list ;)
[07:55] <akiva-mobile> plasma, A friend and I are currently going through the python challenge, if you ever want to join us. Its ton of fun to tackle the puzzles together.
[09:24] <lordievader> Good morning.
[09:30] <akiva-mobile> lordievader, good morning
[09:30] <lordievader> Hey akiva-mobile, how are you doing?
[09:31] <akiva-mobile> lordievader, thank god, you?
[09:32] <lordievader> akiva-mobile: I'm doing good too ;)
[09:32] <akiva-mobile> lordievader, yah why's that?
[09:33] <lordievader> ?
[09:34] <akiva-mobile> lordievader, okay okay; you are doing good; I got it :P
[09:35] <lordievader> Hehe :)
[09:57] <akiva-mobile> lordievader, I bid my farewell. enjoy the rest of your day
[09:58] <lordievader> akiva-mobile: Same to you.
[11:37] <zoidberg_> hi there
[11:37] <zoidberg_>  i have experienced something strange when updating to 14.04 beta
[11:37] <zoidberg_> i had the network-manager deinstalled, and wicd installed. After the update something was disabling my wifi via rfkill  soft-block, i solved this problem by installing the network manager again and deinstalling wicd, i'm not sure what  caused the problem, i believe that it has something todo with the Network Manager, and not really with wicd.
[11:37] <zoidberg_> because with disabled wicd and only wpa_supplicant it didn't work and with wicd disabled and airmon it didn't work
[11:48] <plasma> yeah i have problems with network manager too
[11:48] <plasma> or better said, he has problems with dbus
[11:48] <plasma> not working at all for me
[11:53] <mithran> front mic does not working
[11:54] <mithran> speakers are working but no mic is detected on front panel
[11:55] <mithran> asus m5 a97 motherboard, amd fx unlocked processor
[11:56] <mithran> would you please help me to solve this problem?
[11:58] <mithran> front mic does not working
[11:59] <mithran> front panel problem speakers are working properly
[12:26] <BluesKaj> 'Morning folks
[13:19] <darklight_> If I set hot corners they randomly stop working, that's incredibly annoying, also the xchat-indicator is broken since xchat goes to "tray" as in it disappears and the indicator starts a new session
[14:53] <raccoon6> i have 2x64gb ssds,1x128ssd and 1x750 hdd i am trying to figure out how to partition all of it efficiently
[15:15] <lordievader> Good afternoon.
[16:25] <soee> hi, guys someone have good solution for video teraing with latest 331 drivers, nvidia-prime and laptop -> hdmi -> tv configuration ?
[16:25] <soee> *tearing
[17:22] <dick_> hi. I've downloaded current version of 14.04 cause i want to help with tests, but Aria said that "Checksum error detected", but I checked sum by myself and it was good
[17:23] <dick_> shuld i burn this file into dvd or not?
[17:25] <llutz> dick_: you checked the md5sum and its ok? burn
[17:26] <llutz> dick_: btw use -/+rw media, so you may only waste time
[17:42] <jtaylor> people still use dvds oO
[17:42] <jtaylor> just use an usb stick
[18:03] <Daekdroom> llutz, RW media is actually bad for OS installers because they have a high error rates.
[18:04] <llutz> Daekdroom: hrhr you're kidding?
[18:05] <bekks> Daekdroom: How does RO eliminate the error rate, technically? :)
[18:06] <llutz> Daekdroom: buy proper media and you wont have that problem. don't waste ressources by using -ro media for a one-time installation
[20:08] <basketball> The following packages have been kept back:
[20:08] <basketball>   usb-modeswitch-data
[20:08] <basketball> 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
[20:12] <lordievader> basketball: Is that with apt-get upgrade, or with apt-get dist-upgrade?
[20:26] <lordievader> basketball: In case you didn't see my message:
[20:26] <lordievader> basketball: Is that with apt-get upgrade, or with apt-get dist-upgrade?
[20:26] <basketball> both
[20:26] <lordievader> Hmm, dist-upgrade usually does the trick.
[20:29] <basketball> lordievader,  this is running dist-upgrade http://paste.ubuntu.com/7137691/
[20:29] <lordievader> basketball: This is a good read about it: http://talk.maemo.org/showthread.php?t=40102
[20:30] <lordievader> It might simply be that some dependency hasn't landed yet in the 'stable' repos.
[21:06] <saurov>  anyone know about how to remove right protection from a flash drive?
[21:12] <lordievader> saurov: Write protection? What filesystem does it have? Also I've seen flash drives with a little write protection switch on the side.
[21:18] <saurov> msdos, don't have any switch
[21:19] <saurov> its twinmos p2 bro
[21:20] <lordievader> Seems standard enough, I presume it is mounted read-write?
[21:20] <saurov> only read
[21:21] <lordievader> That was the problem right, that you couldn't write to it? Or have I understood it incorrectly?
[21:21] <saurov> i can copy paste but can't format or change anything
[21:22] <saurov> i can't paste into the pendrive
[21:22] <saurov> pardon me, i'm not a geek and my english is also not good
[21:23] <lordievader> saurov: Ok, can you give me the terminal output of "sudo fdisk -l" and "mount"?
[21:23] <saurov> yes
[21:24] <lordievader> !paste | saurov
[21:27] <saurov> http://paste.ubuntu.com/7137930/
[21:28] <saurov> http://paste.ubuntu.com/7137940/
[21:29] <lordievader> saurov: I guess sdb is your usb-stick?
[21:29] <lordievader> It's partition table is quite nasty.
[21:30] <saurov> yes, thats it
[21:30] <lordievader> saurov: I'd backup any data on it, and reformat the thing.
[21:30] <saurov> i don't know how it happened, one of my friend used that
[21:31] <saurov> in windows pc
[21:32] <saurov> how i'll reformat ? i can't format it using disks
[21:32] <lordievader> Creating partition types that Linux doesn't understand is quite a feat.
[21:33] <saurov> is there any way to solve this?
[21:33] <lordievader> saurov: You can format it with CLI utilities like parted, or with its GUI counterpart gparted. (Assuming here you use Ubuntu)
[21:34] <saurov> yes i use ubuntu
[21:37] <lordievader> saurov: Backup the data -> open gparted -> make a new partition table -> create a fat32 partition -> mount <- partition -> copy data back.
[21:39] <saurov> gparted= scanning all devices.. for 2 minutes
[21:41] <lordievader> saurov: It might be that he is freaking out about those filesystems ;)
[21:41] <saurov> haha may be.. its stuck :D
[21:48] <saurov> Can't write to /dev/sdb, because it is opened read-only.
[21:51] <lordievader> saurov: Unmount it first.
[21:51] <lordievader> Well after the backup... Did I mention that you had to make a backup.
[21:51] <lordievader> Backups are good :)
[21:52] <saurov> okay
[22:00] <saurov> http://imagebin.org/301057
[22:02] <lordievader> saurov: Try unmounting it through your filebrowser, you don't have a dir/files open from that mount?
[22:05] <saurov> if i unmount it through nautilus, it ejects and can't find in gparted
[22:06] <lordievader> saurov: Hmm, unplug it and plug it back it?
[22:06] <saurov> yes, but can't unmount it
[22:08] <lordievader> saurov: What does "lsof -M /media/saurov/ROBI" return?
[22:08] <saurov> COMMAND   PID   USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
[22:08] <saurov> nautilus 5135 saurov   22r   DIR   8,16     4096    1 /media/saurov/ROBI
[22:09] <lordievader> saurov: Right, close nautilus (filebrowser) and try to unmount it again.
[22:12] <saurov> nope, its not unmounting
[22:14] <lordievader> saurov: Does the lsof command return things?
[22:15] <saurov> COMMAND    PID   USER   FD   TYPE DEVICE  SIZE/OFF NODE NAME
[22:15] <saurov> nautilus 16542 saurov   22r   DIR   8,16 850100224  770 /media/saurov/ROBI/Lumia
[22:16] <lordievader> Then it is still running somewhere. You can pull up a terminal and issue "kill 16542" to kill it.
[22:18] <saurov> wow it works
[22:18] <saurov> now i've to delete the partition? yes?
[22:19] <lordievader> saurov: I'd just make a new partition table. Gets rid of them all in one go ;)
[22:19] <lordievader> Be sure to select the right device though.
[22:20]  * lordievader time for bed.
[22:21] <saurov> yes, i know.. okay may be see you tomorrow
[22:22] <saurov> take care.. thanks for the help
[22:28] <navel> Hello ppl
[22:28] <navel> 14.04 - have big trouble
[22:28] <navel> succesfully installed catalyst on amd cape verde 7750 hd
[22:29] <navel> that is nice -) but
[22:29] <navel> firefox dont want to hw accelerate FLASH!
[22:29] <navel> help plzzzz
[22:51] <navel> firefox dont want to hw accelerate FLASH! plzzz helppp
[22:51] <onlty> navel, what graphic drivers do you use?
[22:52] <navel> catalyst... try xorg but not luck
[22:52] <onlty> fglrx?
[22:52] <navel> kk
[22:52] <rww> catalyst = fglrx, yes
[22:52] <navel> yes
[22:52] <onlty> Did you check whether fglrx detects your graphics card and has support for your graphics card?
[22:53] <onlty> Direct rendering support
[22:53] <onlty> Try glxinfo | grep direct
[22:53] <navel> direct rendering: Yes
[22:53] <navel> OpenGL renderer string: AMD Radeon HD 7700 Series
[22:53] <navel> kernel 3.13
[22:54] <navel> fglrx ver : 13.35.1005
[22:55] <navel> already tried another versions (old) and OpenSource driver... nothing changed
[22:55] <onlty> navel, can you go to "about:support" in Firefox and see what there is on the Graphics section?
[22:57] <navel> damn
[22:57] <onlty> why?
[22:57] <navel> cant start Firefox... crashes at start
[22:57] <onlty> ?!
[22:57] <navel> need to clean config
[22:57] <navel> take some minutes
[22:57] <onlty> oh..ok
[23:00] <navel> ok in support page now
[23:00] <onlty> Go to 'Graphics' section
[23:00] <navel> Adapter Description	ATI Technologies Inc. -- AMD Radeon HD 7700 Series
[23:00] <navel> Device ID	AMD Radeon HD 7700 Series
[23:00] <navel> Driver Version	4.3.12798 Compatibility Profile Context 13.35.1005
[23:00] <navel> GPU Accelerated Windows	0/1 Basic
[23:00] <navel> Vendor ID	ATI Technologies Inc.
[23:00] <navel> WebGL Renderer	ATI Technologies Inc. -- AMD Radeon HD 7700 Series
[23:00] <navel> windowLayerManagerRemote	false
[23:00] <navel> AzureCanvasBackend	cairo
[23:00] <navel> AzureContentBackend	cairo
[23:00] <navel> AzureFallbackCanvasBackend	none
[23:00] <navel> AzureSkiaAccelerated	0
[23:01] <brainwash> !pastebin
[23:02] <onlty> It looks like Firefox detects your graphics card
[23:02] <navel> yeah ... but dont want to enable hw accel
[23:04] <onlty> Go to this URL : http://get.webgl.org/
[23:04] <onlty> It would show whether Firefox supports WebGL or not
[23:05] <navel> Your browser supports WebGL
[23:05] <onlty> Do you see a spinning cube?
[23:06] <navel> yes
[23:07] <onlty> If then, it is flash's problem not Firefox's problem
[23:07] <onlty> Is your card listed in http://helpx.adobe.com/x-productkb/multi/stage3d-unsupported-chipsets-drivers-flash.html ?
[23:08] <onlty> Oh
[23:08] <onlty> *On Linux, hardware acceleration is only supported in Google Chrome.
[23:08] <onlty> Switching to Google Chrome might work
[23:08] <navel> tryed already
[23:08] <navel> =D
[23:08] <navel> no accel
[23:09] <navel> same thing happened in 13.10
[23:11] <onlty> In that page, go to 'Assessing your current GPU' section
[23:12] <onlty> Does it say 'Your gpu does not supports Stage3D ...' ?
[23:12] <navel> hmmm what page
[23:13] <navel> ohhh sry checking
[23:13] <navel> our gpu does not support Stage3D in Baseline profile, but it may support Constrained profile.  Please update your player to version 11.4 or higher to see if Constrained profile is supported.
[23:13] <navel> Render Mode: Software (Direct blitting)
[23:14] <bekks> navel: thats in chrome, currently?
[23:16] <navel> fox
[23:16] <bekks> No chance then.
[23:17] <bekks> Adobe discontinued Flash support after 11.2 on Linux. You have to use Chrome to get > 11.2 on Linux, using the PepperFlash plugin which is shipped with Chrome.
[23:22] <navel> installing pepper =D
[23:22] <navel> be in some minutes
[23:22] <bekks> you dont have to install pepper.
[23:23] <bekks> Install chrome, it ships the Pepperflash plugin.
[23:27] <navel> nope
[23:27] <navel> now i fix it =D
[23:27] <navel> thx
[23:28] <navel> chrome come with 11.2 flash
[23:28] <navel> we need to install separate pepper for 12 flash
[23:28] <navel> testing now = WORKS!
[23:28] <navel> 60 fps in Combat Sector
[23:29] <navel> =D
[23:29] <navel> and other 3d flash i think
[23:29] <navel> damn where u been 3 month ago man!!!
[23:29] <bekks> You could have asked earlier :P
[23:31] <navel> added onlty and bekks to FList
[23:31] <navel> can like u guys anywhere if want -)
[23:31] <bekks> Whatever a "FList" might be. Dont know wether that was an offense now.
[23:32] <navel> friend list
[23:32] <navel> =D
[23:33] <rww> some IRC clients think they're IM clients, and vice versa :(
[23:33] <bekks> I suggest using a sane irc client then.
[23:33] <rww> they're using xchat, which is mostly sane
[23:33] <bekks> It has a "FList" - that cant be sane :)
[23:34] <rww> "mostly"
[23:38] <navel> damn...
[23:39] <navel> with that i want to update kernel to 9.99 =D
[23:40] <navel> its safe to update kernel when catalyst (fglx) installed
[23:40] <navel> have some bugzzz before -D
[23:40] <navel> what u think?
[23:40] <bekks> Kernel 9.99?
[23:40] <navel> "latest"
[23:40] <bekks> And a manually installed driver (not from the repos) will break upon kernel update.
[23:41] <navel> 3.14 is real faster then 3.13?
[23:44] <bekks> 3.14 isnt released yet.
[23:44] <navel> damn ... forget distro name for configuring CTRL+SHIFT; ALT+SHIFT keyboard trigger
[23:45] <navel> tweak...