[00:00] <daftykins> chipotle: screenshot?
[00:04] <chriys> daftykins I'm the only one who is going to access to the vps but it will host a public website
[00:04] <daftykins> chriys: i would definitely say that FTP is a dangerous service to run
[00:05] <daftykins> in fact i'd go so far as to say it's a really bad idea
[00:06] <Yelu> chipotle: GUI install Quote "People could not find the tick box because you need to scroll down the license page. I think that this caused some problems with the installation. " see source: http://ubuntuforums.org/showthread.php?t=2083409
[00:06] <chriys> ok but How can I access my file from Dreamweaver
[00:06] <chriys> I can turn it off when i'm done
[00:06] <chipotle> ok,thxs
[00:07] <elroy> in 13.10 I don't have the screen brightness adjustment in Brightness and Lock
[00:07] <elroy> how do I adjust screen brightness?
[00:08] <daftykins> chriys: i hear it supports SFTP access
[00:08] <elroy> no additional software drivers available
[00:10] <vonsyd0w> chriys, sorry had to take a phone call (im on-call) :(
[00:11] <vonsyd0w> chriys, the only two changes that are needed are local_enable=YES and write_enable=YES. The rest of the conf file can stay default.
[00:11] <vonsyd0w> Regardless, this won't give you access to /var/www until you alter permissions
[00:12] <vonsyd0w> ilhami, did you enable "3D acceleration" in the display tab for the VM?
[00:12] <vonsyd0w> and install vbox gAdditions?
[00:13] <ilhami> Yes and that crashed Unity. Seriously I need something else than Unity.
[00:13] <vonsyd0w> try gnome-shell! thats what i use
[00:13] <wolflarson> KDE FTW
[00:13] <daftykins> elroy: best idea is to google your laptop make+model
[00:13] <vonsyd0w> i need to install KDE and play with it. I'm afraid I'll like it
[00:13] <vonsyd0w> lol
[00:13] <wolflarson> lol
[00:14] <extravagantdrake> My PC is too old to run Ubuntu 12.04.4 LTS with Unity 2D
[00:14] <wolflarson> it does take some config but when you get it to a good spot ... i never have gone back
[00:14] <stef1a> Out of the blue, my laptop can no longer connect to wireless networks, though it can view them. I am using Ubuntu 13.10. Help?
[00:14] <ilhami> vonsyd0w Gnome is much nicer but also requires a lot I think.. I need something lightweight
[00:14] <extravagantdrake> The mouse takes several minutes to respond briefly
[00:14] <jasabella> iam loving kde but hate the sheer amount of built in  keyboard shortcuts
[00:14] <wolflarson> you can change them
[00:15] <jasabella> i know, still a pain
[00:15] <wolflarson> yea
[00:15] <wolflarson> i guess ...
[00:15] <bekks> extravagantdrake: then your pc is too old for Ubuntu, briefly.
[00:15] <daftykins> extravagantdrake: try lubuntu or xubuntu
[00:15] <jasabella> oh and the kmenu doesnt pop up with the windows key by default
[00:15] <wolflarson> yea
[00:15] <daftykins> jasabella: if it can be configured, it's not a problem
[00:16] <wolflarson> jasabella: its not the windows key its the super key
[00:16] <jasabella> meta key :D
[00:16] <wolflarson> heh
[00:16] <jasabella> kind of confusing for newbies i found but ya
[00:16] <ilhami> it's almost as my VM is faster without the virtualbox additions :D
[00:17] <jasabella> is tere a package that will ease the transition  from windows?
[00:18] <vonsyd0w> ilhami, what are the specs of your PC?
[00:18] <vonsyd0w> specifically RAM and CPU
[00:18] <ilhami> 4 GB
[00:18] <ilhami> RAM
[00:18] <ilhami> I5 CPU
[00:18] <chriys> vonsyd0w I see but how can I access /var/www from the ftp
[00:18] <ilhami> i5
[00:19] <ilhami> I have optimus :D
[00:19] <vonsyd0w> chriys, you'll need to change the permissions on /var/www - the sysadmin in me wont allow me to walk you through the unsecure method. sorry.
[00:19] <Sommerpils> Hi! How can i upgrade my distrol from 12.04 to 14.04? I know the LTS is not out until 16.th but I want to try it anyways
[00:20] <vonsyd0w> ilhami, so you can switch between intel gfx and nVidia gfx, right?
[00:20] <ilhami> yes :D
[00:20] <vonsyd0w> i think thats what that is
[00:20] <rww> Sommerpils: update-manager -d; #ubuntu+1 for 14.04 support
[00:20] <witheld> wait extravagantdrake seriously why did you give that "advice"
[00:21] <witheld> why wouldn't you just install ubuntu server
[00:21] <Sommerpils> thanks
[00:21] <Sommerpils> Il try it
[00:21] <vonsyd0w> I'm running a thinkpad 430 dual core w/ 16G and have 5 VMs running (windows and gnome shell) and it runs great w/ intel HD 4000. Graphics are disabled in the win box but not gnome-shell
[00:21] <chriys> ok ok vonsyd0w do you think there's a way that the content of public_html shows inside of /var/www
[00:21] <Sommerpils> sweet thanks rww
[00:22] <witheld> vonsyd0w: what virtualization tech/software?
[00:22] <vonsyd0w> virtualbox
[00:22] <ilhami> in the Linux channel they suggested that I should call Canonical :D
[00:22] <vonsyd0w> i have a home lab running kvm and VMware sitting next to me
[00:22] <vonsyd0w> love me some virtualization
[00:23] <vonsyd0w> chriys, is public_html in your home directory?
[00:23] <chriys> yeah
[00:23] <betabertus> hey
[00:23] <chriys> i'm root of the vps
[00:23] <vonsyd0w> oh, wait your root account is enabled and you're using it for FTP?
[00:24]  * vonsyd0w watches everyones eyes open wide
[00:24] <chriys> actually that's the only way I can access it
[00:24] <vonsyd0w> i'm not seeing the problem then, unless root doesn't have write access to /var/www
[00:24] <vonsyd0w> which it should
[00:24] <ilhami> I am going to use this VM for development so it better be fast vonsyd0w or I will call canonical :D haha
[00:25] <chriys> vonsyd0w I can disable ftp when I'm done
[00:25] <Yelu> CS
[00:25] <vonsyd0w> plot twist: chriys is running CentOS, lol
[00:26] <ilhami> CentOs has its own channel?
[00:26] <ilhami> right?
[00:26] <vonsyd0w> ilhami, they do. im joking tho'
[00:26] <chriys> vonsyd0w i'm running Ubuntu 12.04
[00:26] <vonsyd0w> chriys, start supplying some error messages, we're going in circles here
[00:28] <ilhami> IT WORKS!!!!!
[00:28] <ilhami> :D:D:D:D:D:D:D:D:D:D:D:D:D
[00:28] <ilhami> :D:D:D:D:D:D
[00:28] <ilhami> Sorry for the spam
[00:28] <ilhami> vonsyd0w 3d acc works now.
[00:28] <vonsyd0w> w/ intel gfx?
[00:28] <ilhami> I just updated the kernel first :D
[00:28] <ilhami> no no
[00:28] <ilhami> I just updated the kernel
[00:28] <vonsyd0w> oh nice
[00:28] <chriys> vonsyd0w when I try to log using a username except root it shows 500 oops cannot change directory /incoming
[00:28] <ilhami> and then installed the virtualbox guest addition after
[00:29] <vonsyd0w> chriys, you need to update the vsftpd.conf file as stated earlier and restart th vsftpd service
[00:29] <ilhami> enabled 3D... It's so fast now :D:D:D
[00:29] <betabertus> how do i remove ubuntu option from boot on lenovo z500?
[00:29] <ilhami> vonsyd0w no lag at all
[00:29] <ilhami> faster than my host windows maybe :D
[00:29] <ilhami> Windows host
[00:29] <ilhami> *
[00:29] <vonsyd0w> ilhami, yea virtualbox is awesome once you get it working
[00:29] <chriys> ok i'll try that
[00:30] <k1l_> betabertus: you want windows only booting?
[00:30] <vonsyd0w> you got 30 mins, game of thrones is about to come on
[00:30] <vonsyd0w> lol
[00:30] <betabertus> no i have two entries of ubuntu one is 13.10 and one is 13.04 would like to remove the 13.10 one
[00:31] <vonsyd0w> oh chriys, have a look at this: http://serverfault.com/q/34678/57036
[00:33] <betabertus> any recommended software to do this?
[00:33] <betabertus> or should i just use msconfig and delete entry?
[00:33] <vonsyd0w> for root logins... FYI root logins are a bad idea on a VPS. very bad. Passwords in plain text. BUT! You already know that and like livin' on the edge
[00:34] <ilhami> haha no more git bash :d
[00:35] <ilhami> Ubuntu here I come..
[00:35] <ilhami> Git bash for Windows that is
[00:36] <vern> cannot boot afterupgrade to 12.10
[00:36] <vonsyd0w> chriys, here is a tutorial for using SFTP w/ dreamweaver: http://goo.gl/5pQLza - Much much more secure and safe assuming root can SSH. You can uninstall vsFTPd afterwards.
[00:36] <vern> please help
[00:37] <daftykins> vern: what happens?
[00:37] <betabertus> anyone please advise me
[00:37] <chriys> vonsyd0w root can access all files I gonna retry with Dreamweaver
[00:37] <vern> i upgrade from 12.04 to 12.10 and cannot boot
[00:37] <daftykins> vern: explain 'cannot boot'
[00:38] <betabertus> lenovo z500 has caused so many problems with deul boot now, would not advise
[00:38] <vern> it says ubuntu and than go black , no graphics
[00:39] <Beldar> !nomodeset | vern boot this and reload the graphics
[00:39] <vonsyd0w> chriys, heres an even better tutorial, straight from Adobe: http://helpx.adobe.com/dreamweaver/using/connect-remote-server.html#sftp_connections
[00:40] <Slarv> Is someone able to point me towards documentation for installing ubuntu so that on the next boot the new owner is prompted to set up their username, location, computer name etc?
[00:40] <daftykins> !documentation | Slarv
[00:40] <daftykins> Slarv: oh sorry i foolishly typed that before reading your whole query
[00:40] <k1l_> Slarv: you want an oem install?
[00:41] <k1l_> !oem
[00:41] <Slarv> yes, k1l_ t that sounds about right
[00:42] <vern> thnx
[00:44] <betabertus> hey kill please how do i remove the second ubuntu option from bootmenu?
[00:45] <cisconinja> where can i find irc admin
[00:45] <daftykins> cisconinja: #freenode
[00:45] <k1l_> cisconinja: for this channel see in #ubuntu-ops
[00:45] <cisconinja> daftykins: thanks
[00:46] <k1l_> betabertus: well, you need to configure the grub scripts to not mention one of your ubuntu installs
[00:46] <k1l_> !grub2 | betabertus
[00:47] <Guest54492> anyone know why dd and cp would be an order of magnitude or mroe slower than nautilus when copying files?
[00:49] <daftykins> Guest56047: if an appropriate blocksize isn't specified the command count is artifically greater
[00:50] <daftykins> Guest56047: also dd copies blank space too, depending on what you're doing
[00:50] <Sommerpils> Doesnt dd copy physical sectors while nautilus only handles logical files?
[00:50] <daftykins> ^ yep
[00:50] <daftykins> well, i think blocks still, not 100% sure
[00:51] <cyphase> i've tried specifying blocksize, and it doesn't help. plus, it didn't used to be this slow even without specifying blocksize
[00:52] <wisescribe7> In Ubuntu 13.10, video playback is very choppy with Mozilla Firefox. Can anyone please help?
[00:53] <cyphase> wisescribe7, firefox, or flash?
[00:53] <wisescribe7> firefox
[00:55] <betabertus> great solved! thanks guys
[00:56] <akurilin> Quick question: is there a recommended location for me to place static assets (pictures in my case) to be served either through a web server or read locally from disk by various web apps? Currently all of my apps run as www-data and most custom applications go under /var/www.
[00:57] <akurilin> I'm ok with placing everything under /var/www, just wanted to know if there's a more idiomatic place in linux/ubuntu.
[00:58] <wisescribe7> cyphase: Could it be a flash issue?
[00:58] <cyphase> wisescribe7, not likely if it's not a flash video
[00:58] <daftykins> akurilin: it's purely down to your apache config really
[00:59] <wisescribe7> cyphase: I am using an old video card, I might add. Dell Dimension 9100, 3GB RAM, and an ATI Radeon X300
[00:59] <foo_> hi
[00:59] <Sommerpils> hi foobar
[00:59] <cyphase> wisescribe7, was it working before? did something change?
[00:59] <wisescribe7> Processor is P4 2.8 GHZ w/Hyper-Threading
[01:00] <vern> ..
[01:00] <wisescribe7> cyphase: The problem is with HD video being out of sync and choppy, otherwise, it works fine.
[01:00] <cyphase> wisescribe7, is the correct video driver installed?
[01:02] <wisescribe7> cyphase: No, I didn't install the video drivers specifically for the card after installing Ubuntu.
[01:02] <Yelu> akurilin: You are in control with defining that for you, but see https://duckduckgo.com/?q=apache+where+to+place+static+web+content+best+practices&kj=ct&kl=us-en&kn=1&kx=o
[01:02] <cyphase> wisescribe7, that may be why then. or possibly the video card can't handle HD video; i don't know
[01:11] <stephanie_> i just installed ubuntu on friend's computer...having issues with flash: http://i62.tinypic.com/in4l7r.png
[01:12] <stephanie_> i had this problem before on another computer and someone gave me a solution...changing a setting i can't remember
[01:14] <k1l_> !away > mpmc[BNC4FREE]
[01:14] <betabertus00> stephanie_ have you installed adobe flash from the ubuntu software centre?
[01:15] <akurilin> daftykins, Yelu thanks for the tip. Actually I'm on nginx myself, but it doesn't seem to be opinionated
[01:16] <akurilin> I remember doing research into this back a while ago when I started deploying my apps first and folks were suggesting using www-data user under /var/www
[01:16] <akurilin> so I just stuck with that
[01:16] <stephanie_> betabertus00, yes, i have version 11.2.202.350 installed
[01:17] <betabertus00> have you done the update for required software changes?
[01:17] <daftykins> akurilin: ah i think it pretty much shares the same config styles, can't comment 100% as i've never used it :)
[01:18] <Yelu> akurilin: So you are fine sticking to the standards with www-data (also under ubuntu).
[01:19] <stephanie_> betabertus00, yes, i'm up-to-date
[01:20] <stephanie_> betabertus00, someone suggested disabling hardware acceleration, but i'm not sure which settings to go into
[01:25] <vern> pls need help cannot start after upgrade to 12.10
[01:26] <Beldar> vern, I suggested nomodeset, did you try it so we can rule that out?
[01:26] <vern> yes but no graphics
[01:27] <Beldar> vern, That is a low graphic boot, so that you may get a desktop to load drivers from.
[01:27] <vern> what do i do after that?
[01:27] <vern> i mean how to load it
[01:28] <Beldar> vern, when you installed 12.04 did you have to install any graphic drivers? They don't follow a release upgrade.
[01:28] <vern> no
[01:29] <vern> everything worked out of the box
[01:29] <Beldar> vern, Problem here is there are a handful of possibilities, so without any real details from you we are where your at.
[01:30] <NewUbuntuUser> I formated my flash drive yesterday using gparted and now it belongs to root, how can I change it to user ?
[01:30] <NewUbuntuUser> anyone please help
[01:30] <vern> it says something like no display, x server error, compizz error
[01:31] <vern> i sholuld have done clean install
[01:31] <JBViewerr_007> hello, all
[01:31] <vern> any idea how to recover data?
[01:32] <NewUbuntuUser> hi JBViewerr_007
[01:32] <rww> boot from a LiveCD, copy/paste to flash drive or w/e
[01:32] <vern> Beldar
[01:32] <Beldar> vern, as rww suggests a live cd
[01:33] <vern> so goodbye all data?
[01:33] <JBViewerr_007> Haven't been on IRC since forever, so forgive me if I'm a tad rusty
[01:34] <Yelu> stephanie_: Just play a movie in your browser and right click on that. In the pop-up menu click on "Settings" . Uncheck "Enable hardware acceleration"	
[01:34] <Beldar> vern, boot a live cd open it's partitions and recover what you need.
[01:34] <NewUbuntuUser> how can I change from root to user ?
[01:34] <vern> 12.04 or 12.10 or?
[01:35] <stephanie_> Yelu, the box is distorted, so pointing at the checkbox and clicking doesn't work...besides...all flash will be affected, not just youtube videos...e.g. yahoo mail
[01:35] <Beldar> vern, Any live ubuntu cd will get you in.
[01:35] <vern> ok
[01:35] <vern> thnx
[01:35] <stephanie_> Yelu, i need a system wide way to turn off hardware acceleration for flash
[01:36] <Beldar> vern, Just to be sure here, you did not install ubuntu from windows did you?
[01:36] <vern> no from 12.04 to 12.10
[01:36] <vern> upgraded it
[01:36] <vern> fucked
[01:36] <vern> sorry
[01:36] <Beldar> vern, Did you install 12.04 from a live dvd/usb originally?
[01:37] <vern> yep
[01:37] <vern> dvd
[01:37] <Beldar> vern, cool just making sure.
[01:37] <vern> o0k
[01:37] <JBViewerr_007> I just installed 14.04 Beta to a USB drive, giving it a test run
[01:37] <Beldar> !14.04 > JBViewerr_007
[01:39] <Yelu> stephanie_: Ok, I see. - Unfortunately I'm not well prepared for that. - May be you want to have a look here http://ubuntuforums.org/showthread.php?t=2012225 or https://duckduckgo.com/?q=ubuntu+13.10+switch+off+hardware+acceleration
[01:39] <JBViewerr_007> I used xbuntu 12.04 for a while, but have been mostly running/testing other distros
[01:39] <JBViewerr_007> -hey, wow, I get here a bunch of people leave.. do I smell bad?
[01:40] <Beldar> JBViewerr_007, This is support not chat, #ubuntu-offtopic is however
[01:40] <Guest30661> anyone know how to get hibernation working in 14.04
[01:40] <JBViewerr_007> Anyhow, I like 14.04 so far, very slick - BUT laptop suspend didn't work, *sad face*
[01:41] <Guest30661> laptops are bad with suspend
[01:41] <Beldar> Guest30661, #ubuntu+1 is the 14.04 channel until release.
[01:41] <Guest30661> i used to have to drain my battery to get it to turn back on
[01:41] <Guest30661> well. doesnt have to be in 14.04 i guess. 13.10 as well
[01:41] <Guest30661> my hibernation option is always faded out.
[01:41] <Beldar> !14.04 | Guest30661
[01:41] <Guest30661> works through terminal though
[01:42] <Beldar> if it's 14.04 use the correct channel period
[01:42] <Guest30661> 13.10 as well
[01:43] <JBViewerr_007> my suspend was working in other Debian-style installs, so I know that the hardware WILL do it, not a deal-breaker, but sad.
[01:44] <JBViewerr_007> there's a separate channel for 14.04?
[01:44] <bazhang> yes
[01:45] <ddel>  /join #ubuntu+1
[01:50] <JBViewerr_007> well, anyhow, I didn't come by to complain, just the opposite really
[01:52] <daftykins> this channel isn't actually for general chat at all, it's for support only
[01:52] <TheBradsTale> is there a official channel for Ubuntu Touch?
[01:52] <daftykins> !touch
[01:52] <daftykins> *ta-da*
[01:53] <TheBradsTale> thanks
[02:02] <JBViewerr_007> yeah, this is more interesting than talking about Ubuntu, watch people come and go
[02:02] <bazhang> JBViewerr_007, #ubuntu-offtopic for chit chat NOT here
[02:09] <JBViewerr_007> Reminder: to those who are excited about the upcoming release (14.04), you are not allowed to talk in here.
[02:11] <daftykins> JBViewerr_007: really, you should find better uses for your time.
[02:11] <bazhang> !party | JBViewerr_007
[02:11] <bazhang> JBViewerr_007, you 've been asked politely to take chit chat elsewhere several times, please do so
[02:12] <bazhang> that factoid may need updating
[02:14] <JBViewerr_007> I"m trying to help
[02:16] <Bitwise> Hello. Does anyone have any experience with streaming? I'm trying to use VLC as an RTSP server but I can't access the stream, even on the LAN. Here is my stream output string: :sout=#duplicate{dst=rtp{sdp=rtsp://:8554/},dst=display} :sout-all :ttl=128 :sout-keep
[02:16] <i_dun_get_it> It really isn't much of "help" anyways so please just keep/take it to #ubuntu-offtopic
[02:18] <bazhang> Bitwise, have you tried #videolan ?
[02:18] <Bitwise> No, I didn't know they had a channel here.
[02:19] <bazhang> yep they do
[02:19] <Bitwise> I see. My apologies.
[02:21] <ljsoftnet> this is from cat /var/log/dpkg.log | grep "\ install\ " http://pastebin.com/aKW8J7En how do i purge all of this?
[02:24] <Beldar> ljsoftnet, That was from a wine install right? And you want it all gone or the record of it's install?
[02:28] <nf7> Is there a way to get the mouse to disappear when typing like it does in Windows and OS X?
[02:29] <ljsoftnet> Beldar yeah just want to purge all of them
[02:30] <Beldar> ljsoftnet, What ever the install command was run it as sudo apt-get purge "app name"
[02:30] <ljsoftnet> Beldar theres to many of them
[02:32] <Beldar> ljsoftnet, If you want to purge you do this with the main apps you installed, the dependencies are removed generally.
[02:33] <luanpab> daftykins: hi, i'm not sure if u will remember me
[02:34] <ljsoftnet> Beldar dont know where the main apps are
[02:34] <luanpab> but I came here earlier to ask about accessing the bios when the i've full disk encrypted
[02:35] <luanpab> i just like to share the solution, so if anyone have the same issue
[02:35] <luanpab> it is just install grub
[02:35] <luanpab> sudo apt-get install grub-pc
[02:35] <Beldar> ljsoftnet, So you don't remember what you installed within a couple hours today? Or how?
[02:35] <luanpab> restar the computer and I could acess the bios
[02:37] <ljsoftnet> this is from cat /var/log/dpkg.log | grep "\ install\ " http://pastebin.com/aKW8J7En how do i purge all of this?
[02:45] <cs618> hello
[02:45] <RKyle> Hi, does Ubuntu automatically identify and adapt to UEFI systems?
[02:45] <cs618> anybody here?
[02:46] <Beldar> !uefi > RKyle
[02:46] <ninjaaron> something very strange just happened. I've had a 12.04 headless server in my basement, running fairly smoothly for a year or so now, and I just typed `sudo apt-get update` and got the error "sudo: apt-get: command not found" Really weird.
[02:46] <Beldar> RKyle, Hehe, sorta.
[02:48] <ninjaaron> can I reinstall apt-get from a cached package with dpkg or something? Not really a pro at the deep things of Debian.
[02:49] <Beldar> ninjaaron, Debian or Ubuntu?
[02:49] <ninjaaron> Beldar: Ubuntu 12.04 server
[02:50] <melt7777> ninjaaron, how about aptitude install apt-get
[02:50] <ninjaaron> melt7777: aptitude is not installed by default, and I never installed it.
[02:51] <melt7777> ninjaaron u could get on pkgs.org i believe and get it
[02:51] <ninjaaron> melt7777: shouldn't I have a cached package somewhere that I can install from?
[02:51] <linuxuz3r> hi i cant seem to get a valid ip i only get 169.254.x.x i tried everything from resetting the modem to releasing and renewing the the ip can someone help
[02:52] <tab1293> I am trying to watch a show on hbo go in chrome but the page stays black and no video loads. Anyone know why this is?
[02:52] <Thanos> probably crashed
[02:52] <Bitwise> Hello. Does anyone have any experience with streaming? I'm trying to use VLC as an RTSP server but I can't access the stream, even on the LAN. I've already asked in #videolan Here is my stream output string: :sout=#duplicate{dst=rtp{sdp=rtsp://:8554/},dst=display} :sout-all :ttl=128 :sout-keep
[02:52] <melt7777> ninjaaron, if u dont have apt-get u probably dont have apt-cache :)
[02:53] <Thanos> GOT crashed HBO GO last week too.
[02:53] <Guest7686> my flash looks wonky http://i60.tinypic.com/6nzipi.jpg
[02:53] <tab1293> Thanos no I think it has something to do with playing drm content
[02:53] <Guest7686> someone suggested turning off hardware acceleration, which i did in both flash and firefox settings, but it didn't make a difference
[02:54] <Guest7686> obviously, my hardware is old
[02:54] <ninjaaron> melt7777: oh crap. you're right. Looks like I don't have dpkg either. Looks like this install is probably toast.
[02:54] <Guest7686> intel845g chipset
[02:54] <ninjaaron> how the heck did I do that?
[02:54] <melt7777> ninja sounds like u might want to test the hard drive first and then restore from a backup
[02:54] <melt7777> seatools for winblows is a good one
[02:55] <cs618_> hello
[02:55] <cs618_> i'm a newbie
[02:55] <cs618_> can  anyone tell me how i can go to another server
[02:55] <cs618_> and the way i use xhat?
[02:55] <jellow> ninjaaron, are you positive it is not an issue with sudo and nothing to do with apt-get ?
[02:55] <melt7777> cs618_ Yes,  google "xchat howto"
[02:56] <melt7777> cs618_, it even has pictures so u can read it!
[02:56] <xangua> Guest7686: not really a solution but you could try the html5 player youtube.com/html5
[02:56] <ninjaaron> jellow: yeah. I tried it as root also.
[02:56] <cs618_> thanks telt7777
[02:57] <Guest7686> xangua, the problem is that other uses of flash, like yahoo mail and other online tools and services will still be broken
[02:57] <ninjaaron> melt7777: yeah, it's probably a hardware failure. I got this computer used. I think it's like 12 years old.
[02:57] <melt7777> ninjaaron, yes $50 might be a good investment on a new SSD :)
[02:58] <marellact> I am using Ubuntu server 12.04, Virtualbox 4.3.10, & SABNZB to download files.  I can download files correctly but cannot 'stat' the files and move them to post download directories on the server.  SABNZB runs on a virtual machine on the server, and downloads to mounted directories on the server.
[02:59] <melt7777> marellact, sounds like a terrific questions for the author of that software, http://sabnzbd.org/
[02:59] <marellact> I thought it was more of a permissions problem
[02:59] <melt7777> most likely on their faq page
[03:00] <marellact> melt7777: I was wondering if anyone had some experience with permissions on a virtual machine and ubuntu server.
[03:00] <gassed> Trying to do an apt-upgrade and getting errors: Errors were encountered while processing:
[03:00] <gassed> E: Sub-process /usr/bin/dpkg returned an error code (1)
[03:00] <ninjaaron> melt7777: I've been thinking about getting an arm-based mini PC to replace it anyway. better power consumption and beter specs too. Timely also, now that we're almost to 14.04 Everything important is on external drives.
[03:00] <marellact> The downloads happen correctly, just cannot 'stat' the files, whatever that means.  I cannot move them in the virtual machine but the files exist, can be executed, and I can move them on the server
[03:00] <melt7777> ninjaaron, try #raspbian
[03:00] <pedrucho> j #ubuntu
[03:01] <gassed> marellact: that is still not likely a permissions problem
[03:02] <gassed> that would be a sabnzb setup issue -- and would need to be asked there
[03:03] <marellact> Hmm, I will check their irc channel then. But can someone tell me what 'stat' means?  The permissions in 'ls -al' comes up as all question marks (???????)
[03:03] <ninjaaron> melt7777: oh. I am such an idiot! I ssh'd into the wrong host. I was trying to use apt-get on an arch-based desktop box, not my ubuntu server. Sorry for wasting your time! All is well
[03:03] <melt7777> Facepalm
[03:03] <ljsoftnet> how do i purge multiple packages?
[03:03] <melt7777> marellact sounds like a hard drive issue
[03:04] <melt7777> ljsoftnet name them all
[03:04] <melt7777> ok i am way too burned out here
[03:04] <melt7777> later bitches
[03:04] <ninjaaron> melt7777: should still probably replace the box before this happens for real.
[03:04] <ljsoftnet> melt7777 there to many of them
[03:04] <betabertus8899> how do i install office 2013 in ubuntu?
[03:04] <betabertus8899> is it even possible with wine?
[03:05] <Beldar> betabertus8899, I don't think so .
[03:05] <betabertus8899> i got office 2010 to run well but not 2013
[03:06] <betabertus8899> can you open libre office documents in office and vice versa?
[03:06] <ariscop_> if you save them to office compatible formats yeah
[03:06] <ariscop_> i think either 2010 or 2013 added .odf support as well
[03:07] <Beldar> betabertus8899, Yes, however in some circumstances the rendering is not identical. For my grad papers emailed for grading I use ms word only just to be safe.
[03:08] <gassed> dpkg: error processing /var/cache/apt/archives/gnome-media_3.4.0-0ubuntu3.1_amd64.deb (--unpack)
[03:09] <betabertus8899> ok cool thanx, i also have some work to hand in very soon all completed on libre
[03:09] <gbear14275> Files in hidden folders have suddenly started showing up in dash... I turned it off before but can't seem to find the setting...
[03:09] <gbear14275> How can I keep files in hidden folders from showing in dash results?
[03:10] <Beldar> gbear14275, what release and desktop?
[03:10] <betabertus8899> yes i also want to know how to hide all the dash resluts
[03:10] <jellow> betabertus8899, I do not recommend using libre for .doc support there many issues with tables that may prevent you from saving
[03:10] <gbear14275> 13.10
[03:10] <betabertus8899> ok i see
[03:11] <Beldar> gbear14275, Might be a preferences in nautilus, or use dconf-editor
[03:13] <marellact> Looking for someone with experience with virtual machines and permissions on ubuntu server.  Permissions come up as question marks (???????) on the virtual machine, but look normal from the server.  I've set all permissions on the server and in the virtual machine to '777' but permissions still show up as question marks
[03:13] <marellact> Hard drive working normally
[03:14] <jellow> betabertus8899, settings > Security and privacy > Search tab > and there is an off on button.
[03:15] <gbear14275> Beldar, in dconf-editor... what would I change to ensure hidden folder contents are not shown in dash?
[03:19] <great> aaaaaaaaaaaaaaaaaaaaaa
[03:19] <great> hi guys
[03:20] <Phoenix7477> hello
[03:20] <great> anybody here?
[03:20] <great> hi
[03:20] <great> hi
[03:20] <great> hi
[03:21] <great> I'm so hi
[03:21] <great> hi
[03:21] <great> hi
[03:21] <great> in the sky
[03:22] <rww> great: do you have a mile-high Ubuntu support question?
[03:23] <Guest97431> oi
[03:25] <gassed> anyone got any ideas on this? error? --> E: Sub-process /usr/bin/dpkg returned an error code (1)
[03:28] <suzana> oo
[03:28] <suzana> ,,,
[03:28] <great> can anyone tell me some server to make a foreigner friends in the xchat?
[03:29] <suzana> mmm
[03:29] <suzana> ....
[03:30] <jellow> !offtopic | great
[03:30] <suzana> .
[03:31] <great> hi suzana
[03:32] <suzana> hi great
[03:32] <great> nice to meet you suzana
[03:33] <great> where are you from
[03:33] <great> suzana?
[03:33] <suzana> great -hi
[03:33] <great> where are you from
[03:34] <bazhang> !ot | great
[03:34] <great> ot?
[03:34] <suzana> great- argentina
[03:34] <bazhang> great, off topic
[03:34] <suzana> e you?
[03:34] <great> sorry
[03:34] <great> im korea
[03:34] <bazhang> great this is support only, #ubuntu-offtopic for chit chat
[03:34] <great> sorry
[03:35] <suzana> ok
[03:36] <great> Don't worry be happy
[03:37] <Bitwise> Hello. Anyone feel like troubleshooting this stream with me? I'm trying to stream my webcam on my LAN using VLC. This is my stream output string: :sout=#duplicate{dst=rtp{sdp=rtsp://:8554/stream},dst=display} :sout-all :ttl=128 :sout-keep
[03:38] <suzana> great- Don't worry be happy
[03:38] <bazhang> suzana, great NOT here
[03:38] <suzana> great- Thank you also rsrs
[03:38] <Bitwise> I can't get the stream to show even on the same computer in another instance of VLC. I'm using rtsp://:8554/stream to play the stream but it comes back with: main error: open of `rtsp://:8554/stream' failed main debug: dead input main debug: changing item without a request (current 9/10) main debug: nothing to play qt4 debug: IM: Deleting the input
[03:39] <bazhang> suzana, great /join #ubuntu-offtopic
[03:39] <suzana> My English is rudimentary
[03:39] <suzana> My English is rudimentary
[03:40] <rww> suzana: /join #ubuntu-offtopic
[03:40] <EpicCyndaquil> I'm not sure why this shell script isn't functional as .bashrc - it returns the else when it should once I run it within a shell session, but not before: https://3d3.ca/opcyJ.bash#i+gyivBFnNWXFv1F
[03:40] <EpicCyndaquil> can anyone provide some insight?
[03:50] <suzana> ..
[03:53] <pedrucho> i cant open the plugin manager in ardour ? anyone helping?
[03:54] <lotuspsychje> for the users who like to browse an android device from ubuntu i found some handy packages: go-mtpfs and go-mtpfs-unity
[03:55] <Miplo> Hi, do I need to permit root login on an Ubuntu server using SSH? Wouldn't the actual admin user be enough? (using sudo)
[03:56] <lotuspsychje> pedrucho: could you open ardour from terminal, to see what errors you get?
[03:56] <lotuspsychje> !ssh | Miplo
[03:56] <Miplo> I'm not sure it matters but I'm considering Ubuntu 10.04
[03:56] <lotuspsychje> !10.04 | Miplo
[03:56] <pedrucho> lotuspsychje, i found out, ty
[03:56] <EpicCyndaquil> I think that's more of a security question, Miplo. Depends on your environment
[03:57] <Miplo> lotuspsychje: none of that seemed to say anything about that.
[03:57] <lotuspsychje> Miplo: whats you end goal?
[03:57] <mumixam> is there a page that tell the standard settings for software compiled for ubuntu? (eg. --prefix)
[03:57] <Miplo> EpicCyndaquil: as far as I know root user is disabled on Ubuntu, isn't it? So I guess I could just log in as the administrator and sudo my way out, right?
[03:58] <Miplo> lotuspsychje: having the ability to do administrative tasks on my server without having Root login enabled, if possible.
[03:59] <lotuspsychje> !compile | mumixam
[03:59] <EpicCyndaquil> I think you should do some more reading, Miplo. If you're going to put up an SSH server, you should know this already. (Or even better- set up a test environment and try it yourself.)
[03:59] <shibly> Hi,
[03:59] <pedrucho> lotuspsychje, now i im tryng for some plugins to show up in the plugin manager, do you know how to install some?
[04:00] <shibly> May i ask?
[04:00] <lotuspsychje> Miplo: try #ubuntu-server guys or the !security trigger
[04:00] <lotuspsychje> !ask | shibly
[04:00] <shibly> Is ubuntu smarter than Debian?
[04:00] <lotuspsychje> pedrucho: sorry never tested ardour
[04:00] <EpicCyndaquil> shibly: depends on your definition of 'smarter' - there's no single distro that can handle every job out of the box.
[04:01] <pedrucho> lotuspsychje, are you a musician?
[04:01] <lotuspsychje> pedrucho: no, but i know some handy music packages on ubuntu
[04:02] <lotuspsychje> pedrucho: mixx, hydrogen
[04:09] <Smrtz> How can I call the last file edited in a directory?
[04:10] <lotuspsychje> Smrtz: from terminal?
[04:10] <Smrtz> lotuspsychje, yes.
[04:10] <Phoenix7477> the up arrow?
[04:10] <lotuspsychje> Smrtz: maybe history can help you out? man history
[04:11] <Smrtz> lotuspsychje, I know about that, but I'm trying to write a script, and I need to manipulate the last file created.
[04:11] <snufft> i've got a bash script that does some basic file operations (copy, move etc) to prepare a website for installation. I need to edit a settings file which is written in php. is there a parser or something similar, that I can use in bash to edit this file? or is it just a case of using some kind of regex to find what I'm after and change the values?
[04:11] <JBViewerr_007> Can't you just go to Files and use >View >By Modification Date
[04:12] <lotuspsychje> Smrtz: http://askubuntu.com/questions/411462/show-recent-modified-created-files-using-terminal
[04:12] <Smrtz> like, I save a .jpg, and then I need to change the EXIF data on that .jpg, I've already got the EXIF sections figured out, but I can't seem to figure out how to select the last file created...
[04:12] <Smrtz> thanks lotuspsychje
[04:14] <Smrtz> Wait, i could just use ls -lt, right?
[04:15] <lotuspsychje> Smrtz: man ls
[04:15] <Smrtz> lotuspsychje, thansk for the help.
[04:15] <lotuspsychje> Smrtz: -t     sort by modification time, newest first :p
[04:16] <lotuspsychje> Smrtz: no prob mate
[04:17] <lotuspsychje> did someone tested 14.04 on a nexus yet?
[04:19] <bazhang> lotuspsychje, try #ubuntu-touch
[04:19] <lotuspsychje> bazhang: im already there thank you
[04:19] <rww> lotuspsychje: I would hope so, since two of them are the QA devices for Ubuntu on phones.
[04:19] <bazhang> lotuspsychje, thats the place to ask
[04:19] <lotuspsychje> bazhang: ok tnx
[04:36] <ubuntufan2014> anyone available to answer a question about installing ubuntu?
[04:36] <lotuspsychje> !ask | ubuntufan2014
[04:36] <gshmu> ChanServ every times send same message
[04:36] <ubuntufan2014> sorry about that
[04:37] <gshmu> can do not show same message???  ChanServ
[04:37] <rww> gshmu: which message?
[04:37] <gshmu> rww: "https://help.ubuntu.com/13.10/ubuntu-help/a11y-dwellclick.html"
[04:37] <EpicCyndaquil> can anyone help me understand why this bash script doesn't work? https://3d3.ca/yLLXL.bash#VT23LM5SHgTzkCLU
[04:38] <gshmu> rww: SORRY ""
[04:38] <ubuntufan2014> I am trying to install ubuntu and dont have any blank media. is there a netwokr install option? 2nd part of this question is can I install it over windows xp as I want to discontinue using it on the machine
[04:38] <gshmu> [#ubuntu] Welcome to #ubuntu! Please read the channel topic. This channel is logged. Use of this channel implies acceptance of terms at https://wiki.ubuntu.com/IRC/TermsOfService 2014年04月14日 12时30分49秒
[04:38] <rww> gshmu: nope, it shows for all users on join and as far as I know can't be turned off
[04:39] <lotuspsychje> ubuntufan2014: you have an usb stick?
[04:39] <ubuntufan2014> yes i do
[04:39] <rww> and yes, you can install it over Windows XP
[04:39] <lotuspsychje> ubuntufan2014: download unetbootin, download the ubuntu iso and make the bootable usb stick
[04:40] <lotuspsychje> !usb | ubuntufan2014
[04:40] <rww> http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-windows
[04:40] <gshmu> rww:  copy fail^^^^^
[04:40] <rww> Pen Drive Linux > UNetBootin
[04:40] <rww> the latter breaks a lot ime
[04:40] <rww> gshmu: yes, I answered you
[04:41] <gshmu> rww: thanks
[04:41] <gshmu> can't turn off
[04:41] <rww> correct
[04:42] <ubuntufan2014> ok one last question i want to use the christian edition of ubuntu becasue of the parental controls and the filters for porn and such. on the site there is onlt iso there isnt usb stick version do i need to convert?
[04:42] <gshmu> My firefox Mouse Wheel can't work, but Mouse Wheel it's ok
[04:43] <lotuspsychje> ubuntufan2014: you can parental control on regular ubuntu aswell
[04:43] <gshmu> sometimes can't work on firefox
[04:43] <rww> ubuntufan2014: Use the instructions I linked, they have you supply an ISO.
[04:43] <ubuntufan2014> oh wait I think unetbootin site just answered that question..thanks
[04:43] <JBViewerr_007> As far as I recall, the Christian Edition isn't being made any longer. Your version would be out of date.
[04:43] <ubuntufan2014> I appreciate everyones help
[04:44] <ubuntufan2014> it's on 12.04 right now for christian edition
[04:46] <JBViewerr_007> the 12.04 version is two years old now... maybe you could install, then apply updates?
[04:47] <gshmu> My system Ubuntu 12.04  firefox 28.0 (Mouse Wheel can't work sometimes)
[04:47] <rww> assuming that works, which we don't know. which is why Ubuntu derivatives aren't supported in here :\
[04:48] <Beldar> I don't use that edition, but I thought it was grandfathered.
[04:48] <rww> Beldar: elaborate on "grandfathered"?
[04:48] <Beldar> supported
[04:49] <Beldar> I'm not concerned necessarily, just thought it was
[04:49] <rww> Beldar: Nope. We don't have a grandfathering clause in here. Everything that's supported in #ubuntu is on the top part of http://www.ubuntu.com/about/about-ubuntu/derivatives
[04:49] <Beldar> ah, cool, thanks
[04:50] <Flannel> rww: 12.04 is still a thing.  But, Beldar, all it does is have different default programs, so you can install the filtering software (dansguardian, I believe, or at least used to be) on a regular Ubuntu install, etc.
[04:51] <Beldar> Flannel, That makes sense, thanks.
[04:52] <JBViewerr_007> I think that it was Dansguardian and some Christian  study guides, wallpapers, etc.
[05:00] <gshmu> not mouse wheel can't using on firefox, the blank can't work on webpages too
[05:03] <snufft> does anyone know how to escape semicolons in strings? I'm doing a comparison to say if my string = "$databases = array();" but the script aborts because it interprets the semicolon as the end of the line
[05:03] <snufft> this is for bash btw
[05:04] <snufft> I've tried backslash, but it sitll does it
[05:04] <somsip> snufft: use ' not "
[05:04] <somsip> snufft: eg, http://www.serverwatch.com/tutorials/article.php/3898896/Single-vs-Double-Quotes-in-Bash.htm
[05:05] <linux_> hi everybody. I want to issue this command: dpkg -i kerio-control-vpnclient-###-linux.deb but I dont know the version to replace ### somebody can help me?
[05:06] <snufft> somsip, that yeilds the same error unfortunately :( syntax error in conditional expression: unexpected token `;'
[05:06] <ljsoftnet> is there a root wine mime file, i want to remove notepad from right click when i run pcmanfm as root
[05:06] <snufft> regardless of that's with or without the backslash as well
[05:07] <snufft> that's with or without the backslash as well**
[05:08] <somsip> snufft: Oh. I expected that to work. Well, maybe #bash would be a better place to ask then
[05:08] <snufft> somsip, no worries. i'll go check them out :) thanks for the reply!
[05:10] <codygman> How can I make my Alt_R key an extra Ctrl_R? Keysym? Do I need to unlock it first? I don't fully understand xmodmap.
[05:12] <snufft> somsip, you were right, the quotes did it :D I just forgot the space after the last single quote. I had if [[ $DBCRED == '$databases = array();']]; then      instead of if [[ $DBCRED == '$databases = array();' ]]; then
[05:12] <somsip> snufft: ah. glad you found it
[05:24] <JonaD> Y qué onda con esta gente?
[05:24] <JonaD> Están todos zombies?
[05:24] <sacrelicious> hey guys, problem here - i was trying to boost audio from the terminal and i entered in $ amixer set 'Master' toggle. it killed my sound, and I can't get it back on
[05:25] <JonaD> Hello there
[05:25] <JonaD> Who of you actualy uses geany?
[05:26] <bazhang> whats the actual question JonaD
[05:26] <JonaD> How i can compile into geany?
[05:26] <JonaD> I wish to compile on C#
[05:26] <JonaD> C++
[05:26] <JonaD> But the default command is "make"
[05:26] <JonaD> it always drop an error message...
[05:27] <sacrelicious> I can't get any sound at all, please help.
[05:32] <scriptkid> what's the name of the script which gives a recovery hash for luks disk encryption?
[06:15] <maysara> Hello, I want to convert "the last part" of an audio file with sound converter, Is this possible
[06:16] <maysara> ?
[06:16] <srock> in the house
[06:16] <srock> why only part
[06:17] <maysara> srock: I liked the music in the last seconds
[06:17] <srock> so convert the whole thing then delete the rest
[06:18] <Ascavasaion> My laptop has a place for a cellular phone SIM card under the battery.  I removed the battery, slid the SIM card in and replaced the battery.  How do I know if Linux is actually detecting the SIM car and/or the device.  I have done dmesg and lspci but to be honest I do not know what to look for.  someone suggested a dmesg | grep 802.  It only listed a few lines of WLAN information, from what I can tell.  Please can someone help me.
[06:19] <maysara> srock: How to delete or crop the rest?
[06:20] <srock> try majorgeeks for free pograms
[06:20] <srock> programs
[06:27] <Bray90820> Would there be a legal way to backup a bluray disc you own with ubuntu
[06:29] <ikonia> Bray90820: dd it
[06:30] <Bray90820> dd?
[06:30] <ikonia> Bray90820: that will take a block by block copy of the disk, including encyption
[06:30] <ikonia> that way you are not breaking any encyption
[06:30] <ikonia> thus just a media backup
[06:30] <Bray90820> I was hoping without encryption so I could play it back with my media center
[06:30] <ikonia> then it's not a backup
[06:31] <ikonia> you want to make a copy - which is illegal.
[06:31] <Bray90820> Well then import maybe is what i ment
[06:31] <Bray90820> I want to make the discs i own digital
[06:32] <ikonia> there are various encoding tools, such as handbrake, however I'm not going to assist in breaking the encyption, but there is info on the web
[06:32] <ikonia> as long as the encoder can read the disk (playback softare) you can re-encode
[06:32] <ikonia> (playback software)
[06:33] <Bray90820> Handbreak is for dvd not bluray
[06:33] <ikonia> no it's not
[06:33] <ikonia> it's for conversation of any media
[06:33] <ikonia> I'm using it to re-encode blurays as we speak
[06:34] <Bray90820> hum alright
[06:34] <Ascavasaion> My laptop has a place for a cellular phone SIM card under the battery.  I removed the battery, slid the SIM card in and replaced the battery.  How do I know if Linux is actually detecting the SIM car and/or the device.  I have done dmesg and lspci but to be honest I do not know what to look for.  someone suggested a dmesg | grep 802.  It only listed a few lines of WLAN information, from what I can tell.  Please can someone help me.
[06:35] <ikonia> Ascavasaion: look in network manager if there is an option for celular connection or wording to that meaning
[06:36] <Ascavasaion> ikonia: Nothing there, hence me wondering how to see if Linux even detects it.  I have enabled it in the laptop's CMOS as well.
[06:36] <Bray90820> ikonia: does handbreak also convert it to something like mp3 or wav without loosing quality
[06:37] <ikonia> Bray90820: "without losing quality" ?? the whole point of re-encoding it is it will change the quality based on the settings/container you use
[06:38] <ikonia> Bray90820: if you want it the same quality you will need to have a 50GB ray mpeg file from the blue ray
[06:38] <Yelu> Ascavasaion: look in the output of  sudo lshw | less
[06:38] <ikonia> Ascavasaion: does lspci show the sim reader ?
[06:39] <ole_oz6oh> ask             I can download Miro via Ubuntu Software Center and i also se the icon in OTHER
[06:39] <ole_oz6oh> Then i can run MIRO but then ALL stop. I have the same problem in an other Ubuntu 13.10
[06:39] <ole_oz6oh> The same problen is there using terminal  sudo apt-get install miro All is running and i se miro, but then all stop. PLEASE give me an idea. For some weeks ago there was no problems. Then i have tried to make a complete new install off Ubuntu but with the same result
[06:39] <ole_oz6oh> Help me Help me please
[06:39] <ikonia> ole_oz6oh: are you saying you can't install "micro" ?
[06:39] <ikonia> miro sorry
[06:39] <Bray90820> ikonia: i have a bluray disc with some music videos on it and i wanted to convert thoes music videos to audio without loosing audio quality
[06:39] <ikonia> Bray90820: then just re-encode the audio steam only, but use a lossles codec
[06:40] <ole_oz6oh> no i don't have problem with install   only by running
[06:40] <Bray90820> ikonia: does handbreak support that
[06:40] <ikonia> ole_oz6oh: what's the actual issue with it running
[06:40] <ikonia> Bray90820: you can just encode the audio to a seperate file, yes
[06:40] <Bray90820> Alright
[06:40] <Bray90820> That seems to be all the info i need
[06:40] <Bray90820> Thanks
[06:41] <ole_oz6oh> ikonia  i see miro but from now  then miro is closed
[06:41] <ikonia> ole_oz6oh: I don't understand, sorr
[06:41] <ikonia> sorry
[06:41] <catsAre> How do I list all services that are running?
[06:42] <ole_oz6oh> ikonia  i can se miro but when u go to thepiratebay and try vidio all stop
[06:42] <catsAre> I thought `service --list-all' worked for some reason.
[06:42] <ikonia> ole_oz6oh: then don't use illegal software sources
[06:42] <lukes-> hello. how can i include string in find command? like - find ./ -name *binary*.file -exec string word {} \;
[06:43] <ole_oz6oh> ikonia  no  ffor 3 dayes ago there was no problemes
[06:43] <ikonia> ole_oz6oh: that doesn't change what I just said
[06:43] <ikonia> lukes-: find doesn't search the contents of the file, you'd have to do something like a recursive grep
[06:44] <xar-> catsAre: could always install chkconfig; chkconfig --list
[06:44] <lukes-> yes but it's binary, and the output is way too long
[06:44] <ikonia> that's for redhat
[06:44] <lukes-> so grep wont do
[06:44] <ikonia> chkconfig = redhat
[06:44] <xar-> nope
[06:44] <ikonia> and that doesn't show running services
[06:44] <ikonia> that just shows the jobs
[06:44] <ole_oz6oh> ikoni i think my question is bad because my english is bad
[06:44] <xar-> i mean sure it's available on redhat, but there's an ubuntu package for chkconfig
[06:44] <catsAre> xar-: There is one command to do it
[06:45] <xar-> proof: http://packages.ubuntu.com/lucid/admin/chkconfig
[06:45] <ole_oz6oh> ikonia   can you speak on skype ??
[06:45] <ikonia> XCoder2K_: yes, and it still does what I said it does
[06:45] <ikonia> ole_oz6oh: I have no wish to talk about pirate software with you
[06:45] <xar-> eat dem words :D
[06:45] <ikonia> xar-: "them" words
[06:46] <ikonia> or "those"
[06:46] <ikonia> xar-: and again - it doesn't show what's running
[06:46] <ikonia> xar-: it doesn't do any interaction with upstart either, and as ubuntu doesn't use systemV it's not really worth much
[06:46] <ole_oz6oh> ikonia  its not forbitten to get a bbc movie
[06:46] <ikonia> ole_oz6oh: it is
[06:47] <xar-> you can always pipe chkconfig to service, one liner *shrug*
[06:47] <ole_oz6oh> not in denmark
[06:47] <ikonia> ole_oz6oh: yes, it is
[06:47] <xar-> ez pz
[06:50] <Ascavasaion> Yelu, no 3G cellular devices there.
[06:50] <Ascavasaion> ikonia: Nope, nothing.
[06:50] <ikonia> Ascavasaion: this sounds silly, but are you sure you have a cellular connection device ?
[06:51] <ikonia> Ascavasaion: my old laptop has the place for the simcard, but no celular device, because I didn't pay to have one put in
[06:51] <ikonia> Ascavasaion: the sim "socket" doesn't mean thre is a device there
[06:51] <Ascavasaion> ikonia: Not sure to be honest.  There is definitely a place for the SIM, but I am beginning to think that the 3G Cellular controller is an optional extra.
[06:51] <Ascavasaion> ikonia: Snap!
[06:51] <Ascavasaion> hehe
[06:54] <t4ng0> helllo guys,
[06:54] <t4ng0> i got some intresting question. lol how can i change ubuntu logo into tux the penguin logo?
[06:54] <ikonia> t4ng0: logo where ?
[06:54] <ikonia> "lol"
[06:55] <Ascavasaion> ikonia: Thank you for trying. :)
[06:55] <t4ng0> tux the penguin logo?
[06:56] <t4ng0> you know the linux mascot
[06:56] <Yelu> Ascavasaion: There are models only prepared with the SIM slot not having the WWAN module. You could search after the exaxt Model/Type of your machine to check this out in the specs.
[06:57] <Ascavasaion> Yelu: Thank you so much.
[07:15] <MCalavera> Hello Everyone. I am having a problem with my Xubuntu session, everytime I open a program, the session crashes and takes me back to the login screen. According to /var/log/Xorg there is a segmentation fault. Any hints?
[07:16] <Sommerpils> Is it safe to turn of my computer during distrobution upgrade session?
[07:16] <ikonia> no
[07:16] <Sommerpils> I need to go to work with it, and it it still running :p
[07:16] <Sommerpils> fck
[07:16] <Flannel> Sommerpils: Is it downloading? or installing?
[07:16] <Sommerpils> installing
[07:16] <Flannel> then definitely no.
[07:16] <m0e42> downloading yes when installing no
[07:17] <Sommerpils> ok thanks for the input, Il let it run then
[07:18] <andromeduck> so my audio suddenly stopped working
[07:18] <andromeduck> again
[07:19] <andromeduck> um pulseaudo refused to start ladspa-sdk sink not found - I removed the pulse-audio equalizer block from .config/pulse/default.pa
[07:19] <Yelu> Sommerpils: a bit risky: if you can resume or hybernate xou could take it with you to work and finish there. but think twice ...
[07:20] <andromeduck> and now it starts but there's no sound as under output devices I can't select headphone/spakers it says HDMI/DisplayPort 3
[07:20] <andromeduck> duno how to fix
[07:20] <Ascavasaion> Seeing as the laptop's internal internet mobile modem does not exist/work... would http://www.kalahari.com/Electronics/D-LINK-USB-3G-DONGLE-HSPA-USB-ADAPTER-DUAL-BAND_p_48126904#pdp_more_info be a good purchase?  It is supported by Linux as the spec sheets says "Recommended system configuration; Operating System Windows XP/Vista/7/8 32/64bit MAC OS 10.6+ Linux Ubuntu 9.10+".  Any pointers would be much appreciated,
[07:23] <ikonia> Ascavasaion: top tip (you won't like it) if it says "linux/ubuntu support" on the box, that's not always a good thing
[07:23] <ikonia> Ascavasaion: a lot of these vendors make a 3rd part kernel module available thats outside of the kernel and needs to be dropped in, so when it says 9.10 support, it can actually mean "just 9.10" support, or support randomly gets dropped, find a device with "in kernel" support
[07:24] <Ascavasaion> ikonia... and tips or advice then?  http://www.kalahari.com/s?Ntt=usb+modem&searchCategories=4294966903&N=4294966903&Ntk=def&pageSize=12
[07:25] <ikonia> the hauwei normally have solid support, check the exact model though
[07:26] <DrSlony> Hi, could someone with a quite fresh install (in other words, not too tweaked, not much extra stuff installed, as close to a clean install as possible) check if you have a font called just "Monospace", and a font called "DejaVu Sans Mono"?
[07:26] <Ascavasaion> ikonia: Awesome... Will do :)
[07:26] <foolsgold> Ascavasaion: ok
[07:28] <Ascavasaion> foolsgold: ???
[07:31] <Yelu> Ascavasaion: ikonia is right - Huawei  will do a better job, but the price will be higher. - gor your linked Item: This will do its job with some "good words" to install - see here : http://askubuntu.com/questions/426540/3g-d-link-dwm-157-modem-install-on-ubuntu-12-04
[07:34] <MCaveira> Hello every1. I am having a problem with my Xubuntu session, everytime I open an application it puts me back to my login screen. I check Xorg.0.log and it seems that fglrx driver is not loaded. And after that there is a segmentation fault. Any suggestions?
[07:36] <foolsgold> MCaveira: bum
[07:36] <MCaveira> foolsgold, sorry didn't get that
[07:37] <foolsgold> Your a bum MCaveira
[07:37] <DJones> foolsgold: No need for comments like that
[07:37] <Sommerpils> People are so cool on the internet :p
[07:38] <MCaveira> foolsgold, You're a bum. Spell properly please.
[07:38] <Yelu> foolsgold: MCaveira is more a "repeater", but your remarks solved his prblem immediately, for sure.
[07:38] <Yelu> foolsgold: give him a solution, please
[07:42] <foolsgold> MCaveira: is it a new install
[07:42] <tziOm> Seems 12.10 with libssl 1.0.1c-3ubuntu2.7 is still vulnerable to heartbleed
[07:42] <ikonia> tziOm: because it's EOL
[07:42] <ikonia> tziOm: so doesn't get support/patched
[07:42] <tziOm> Stupid fuckers
[07:42] <MCaveira> foolsgold, I believe it is yes
[07:43] <DrSlony> Hi, could someone with a quite fresh install (in other words, not too tweaked, not much extra stuff installed, as close to a clean install as possible) check if you have a font called just "Monospace", and a font called "DejaVu Sans Mono"?
[07:43] <foolsgold> You using nvidia MCaveira
[07:44] <MCaveira> foolsgold, it's an ATI
[07:46] <foolsgold> Did you instal proprietary driver MCaveira
[07:46] <dutchuss2016> how  do i add a ppa
[07:47] <MCaveira> foolsgold, I talked with admin and he told that me that he forced the ATI driver installation. It was refusing but he just forced it. So that is probably the problem.
[07:48] <foolsgold> https://help.ubuntu.com/community/BinaryDriverHowto/AMD
[07:49] <foolsgold> https://help.ubuntu.com/community/BinaryDriverHowto/AMD mca
[07:49] <foolsgold> https://help.ubuntu.com/community/BinaryDriverHowto/AMD MCaveira
[07:49] <MCaveira> foolsgold, I can't open the link here without crashing the session but I thanks, I will check on my phone
[07:51] <dutchuss2016> how do i add a ppa
[07:51] <foolsgold> Can you open a terminal without it crashing MCaveira
[07:51] <dutchuss2016> i want to download minecraft and i need a ppa to do it
[07:51] <MCaveira> foolsgold, yes
[07:51] <bazhang> !addppa | dutchuss2016
[07:52] <DJones> dutchuss2016: minecraft doesn't need a ppa, I just downloaded the minecraft.jar file from their website, set as executable and then right click & run with java
[07:53] <James0r2> having an extra title bar shown in some notifications. can't figure out what's causing this http://imagebin.org/305415
[07:54] <foolsgold> dutchuss2016: I like using this site for http://www.ubuntuupdates.org/ppas .
[07:55] <ikonia> dutchuss2016: I very very strongly advise you not to trust PPA's unless you really understand that specific PPA and what it will do
[07:55] <ikonia> dutchuss2016: installing PPA's without a full understanding of what they contain can do serious damage to your install
[07:55] <andromeduck> so can anyone help me with my audio?
[07:55] <andromeduck> it suddenly stupped working and i have no idea why
[07:55] <xar-> such a party pooper ikonia :P
[07:55] <andromeduck> tried to fix but I think I made it worse :/
[07:56] <andromeduck> basically... no sound
[07:56] <andromeduck> even though everything looks properly configured
[07:57] <xar-> I'd help you, but I only use nix as a server, i know nothing about it on the desktop, let alone audio
[07:58] <xar-> did you try googling or the ubuntu forums?
[07:58] <andromeduck> yeah
[07:58] <andromeduck> I tried reinstalling pulseaudio and alsamixer
[07:58] <andromeduck> before that I removed some pulsaudio-equalizer flags in .config/pulse/default.pa
[07:58] <andromeduck> that people said were causing similar iissues
[07:58] <andromeduck> nothing
[07:59] <andromeduck> so I reinstaled pulsaudio and alsamixer together
[07:59] <andromeduck> now everything looks correct but still no audio
[07:59] <xar-> here's my process when i put linux on my laptop: fedora cd/dvd. did it work? nope. try mint. did it work? nope. try ubuntu. did it work? yes it worked! :D
[07:59] <andromeduck> also my pannel indicator appelt is gone :/
[07:59] <andromeduck> lol
[07:59] <ikonia> xar-: any chance you could try to offer help rather than just random things
[08:00] <andromeduck> my problem is I've run into similar issues like 20 times already and every time it seems to be a diffrent issue
[08:00] <foolsgold> Restart and hold tab key just before ubuntu is loading. This will bring you into boot menu.
[08:00] <xar-> im not saying those distros are bad, im just incapable of troubleshooting weird issues, like audio for example
[08:00] <andromeduck> and it always pops out of the blue
[08:00] <andromeduck> no installs/configs or anything
[08:00] <ikonia> xar-: then don't help
[08:00] <andromeduck> it just stops working
[08:00] <foolsgold> Restart and hold tab key just before ubuntu is loading. This will bring you into boot menu. MCaveira
[08:00] <MCaveira> foolsgold, ok thanks. Will try that. Cheers.
[08:00] <xar-> i wasn't helping, just chatting with andromeduck, which btw has an awesome nickname
[08:01] <andromeduck> lol
[08:01] <andromeduck> :)
[08:01] <ikonia> xar-: ok, this isn't a chat channel, it's a support channel, so please, unless you are offering support, please try to keep it out of the channel
[08:03] <xar-> indeed, I can read the topic, it's the early morning, not like there's much else going on, but you're an op, so i'll back off out of fear :)
[08:03] <Baako>  I am trying to run php on ubuntu i normally use xampp on windows. it is not recommanded to install it in ubuntu so what does ubuntu recommand?
[08:03] <ikonia> xar-: no need for fear, but thank you, appreciated
[08:04] <ikonia> !lamp | Baako
[08:04] <bazhang> Baako, lamp
[08:04] <Baako> which LAMP?
[08:04] <ikonia> Baako: read the link ubottu just sent you
[08:07] <ktosiek> Will postgresql 9.1 still be supported in trusty? I'm afraid it would be a bit much to upgrade both distro and DB at the same time :-)
[08:08] <wh-hw> hi, all , anyone know about monit ?
[08:08] <ktosiek> wh-hw: I know there's something called that
[08:09] <ktosiek> and it even spawns processes for you!
[08:09] <ktosiek> ask the real question, I think that will give you more useful answers :-)
[08:09] <freeman__> hi guys how I can set my brightness level that it works on my Lenovo T510 with Nvidia drivers, the bar changes but not the brightness :(
[08:09] <wh-hw> ktosiek, do you know how to monitor multi process with same name ?
[08:11] <ktosiek> no clue, I've only used supervisord for custom process monitoring. But maybe others can help (and isn't there an IRC channel for monit?)
[08:11] <wh-hw> no
[08:12] <ktosiek> bummer :-<
[08:12] <wh-hw> can supervisord do that ?
[08:13] <andromeduck> freeman__, tried xbacklight?
[08:13] <lintguy> How do i fix the issue that suspend doesn't work and it doesn't wake up?
[08:13] <ktosiek> well, supervisord only monitors things it has spawned. But it can spawn a configured amount of one thing, and even has some support for sharing a socket
[08:13] <lintguy> I've got an Intel Q77 chip, so not an old motherboard
[08:14] <ktosiek> OTOH it doesn't have m/monit, and I'm not sure if it has much of notification support
[08:14] <wh-hw> ktosiek, ok, thanks
[08:14] <foolsgold> lintguy: that's Linux weak spot
[08:15] <lintguy> foolsgold: so it's just a lost cause?
[08:16] <ktosiek> well, it might be temporarily ;-)
[08:16] <dutchuss2016> is there  a working app to broadcast on twich.tv
[08:16] <PatBateman> hi, how is it possible that locate is faster then find? difference?
[08:16] <hateball> lintguy: Well it's improved in kernel 3.15, but that's not in any repo yet
[08:16] <guest32424343> where can i ask questions about teamviewer? Basically i am controlling my pc from home and my girlfriend is pi$$ing about with the keyboard and i want to lock the keyboard
[08:16] <k1l> lintguy: that depends on your specific hardware. try to look out if there are known issues with that hardware regarding suspend
[08:16] <Rory> PatBateman: locate searches an index, find goes through all the directories in real-time
[08:16] <Rory> PatBateman: You can update the index with the "sudo updatedb" command, see how long it takes to actually build a list of all your files
[08:17] <PatBateman> Rory: i see, thanks, and if the file isnt indexed, result is none right?
[08:17] <lintguy> hateball: Yeah, i tested 3.13.3 but no go.
[08:17] <Rory> PatBateman: Yes, make a file now, try to "locate" it, you won't find it til you updatedb
[08:17] <PatBateman> ok
[08:17] <lintguy> k1l: Don't think so, works fine in windows and os x
[08:17] <lintguy> k1l: maybe two gpus?
[08:17] <k1l> lintguy: that is a total different issue.
[08:18] <k1l> dont compare windows (where the manufactures make drivers and stuff) with linux
[08:18] <guest32424343> #join #ubuntu-support
[08:18] <foolsgold> lintguy: I got it to work once. Very hard on drive and monitor. Best to use energy saving. Like turn monitor off, cpu reduced
[08:18] <DJones> guest32424343: #ubuntu is the main support channel (thats the channel you're already in)
[08:18] <lintguy> k1l: yeah, i meant more darwin - still no linux though
[08:18] <ktosiek> k1l: intel kind of makes drivers for linux...
[08:18] <ktosiek> kind of...
[08:18] <k1l> guest32424343: you are already in the support channel
[08:19] <guest32424343> DJones was might to be ubuntu-offtopic
[08:19] <DJones> guest32424343: ok, no worries
[08:19] <k1l> ktosiek: yes, but that effort is in no relation to the "making drivers for windows" :/   that is my point
[08:19] <foolsgold> ktosiek: Intel kinda. Intel is the only one who makes open source drivers
[08:20] <lintguy> Hm, maybe i should check if intel have got anything for this motherboard then?
[08:20] <lintguy> but shouldn't they be in the kernel already?
[08:20] <ktosiek> lintguy: I'd start with grepping through kernel changelog
[08:21] <ktosiek> but the names kernel guys use are othen different from marketing names, so that might be a problem :-<
[08:21] <lintguy> ktosiek: Ok, i'll start with that then. Maybe yank some usb's
[08:21] <k1l> most times its missing modules to load after resume
[08:21] <k1l> so that is what i meant with: see if that is a known issue and if there is a workaround
[08:22] <lintguy> k1l: ok, i'll try removing stuff part by part until it works
[08:22] <lintguy> didn't know sleep was an issue on linux still
[08:22] <dutchuss2016> is there a working streamer app that will stream to twich
[08:22] <lintguy> last 4 motherboards it have worked flawlessly
[08:22] <dutchuss2016> twitch*
[08:23] <k1l> lintguy: it depends on the hardware.
[08:23] <lintguy> seems so
[08:23] <foolsgold> lintguy: I think a lot of proprietary gpu drivers cause problems lintguy
[08:24] <lintguy> foolsgold: i'm running the default open source one for nvidia
[08:24] <Rory> dutchuss2016: You can use ffmpeg, there's a starting point here http://askubuntu.com/a/370725/62969
[08:24] <lintguy> foolsgold: but i'll try with the proprietary too
[08:29] <Yelu> guest32424343: Lock remote devices (on remote host). - see  https://superuser.com/questions/208188/block-keyboard-and-mouse-input-of-remote-user-in-teamviewer-session
[08:29] <Yelu> (or just lock down your girlfriend with the art of social engineering - only kidding ...)
[08:32] <dutchuss2016> i cant get that working either im not good with making command documents
[08:33] <vlt> Hello. I’m using Ubuntu LTS. Is there an SSL CRL on the system that is something keeps updated?
[08:33] <g0tcha> hey guys, is there any downside of using auto security updates on ubuntu?
[08:34] <ktosiek> g0tcha: same as everywhere: even the most subtle of upgrades can brake *something*, but the Ubuntu ones are pretty safe
[08:35] <dutchuss2016> shoouldent ffmpeg have some sort of a gui
[08:35] <ktosiek> oh, and do you mean on your desktop or in some big/shared production environment?
[08:37] <ktosiek> dutchuss2016: nope
[08:38] <ktosiek> IIRC there are some GUIs for re-encoding video, I don't know why they should need ffmpeg's blessing?
[08:38] <brucemb> I'm upgrading openssl. The version from the candidate update is the same. Installed: 1.0.1-4ubuntu5.12 Candidate: 1.0.1-4ubuntu5.12. How can I tell if this has patched the heartbleed bug without using a online tester?
[08:38] <brucemb> anyone know?
[08:39] <ktosiek> brucemb: http://www.ubuntu.com/usn/usn-2165-1/
[08:40] <cristian_c> Hi
[08:40] <k1l> !sslbug | brucemb just get the updates is patched since 7th april
[08:40] <ktosiek> 1.0.1-4ubuntu5.12 is already patched
[08:40] <brucemb> ktosiek, umm... 1.0.1 is vulnerable isn't it
[08:40] <cristian_c> How can I tell an application to use a path contained in PATH?
[08:41] <k1l> brucemb: it got patched. do you know what patches are?
[08:41] <cristian_c> output of echo $PATH
[08:41] <cristian_c> Any ideas?
[08:41] <brucemb> k1l, durh
[08:41] <ktosiek> brucemb: it's not an upstream 1.0.1
[08:41] <g0tcha> thanks ktosiek
[08:41] <ktosiek> that's what the "-4ubuntu5.12" stands for in the version
[08:41] <k1l> brucemb: on ubuntu packages get only seurity and bug fixes without making it a new version number
[08:42] <w0rp> Hmm. I'm mounting a pen drive and I can't write to it via Nautilus or Thunar, but I can through other programs like a terminal emulator or Vim. Is this some kind of GVFS configuration problem or something?
[08:42] <ktosiek> right, and it's not only Ubuntu: same goes for every distro with a security team
[08:42] <brucemb> k1l, oh ok
[08:43] <w0rp> I'm trying a FAT32 pen drive on Ubuntu 12.04.
[08:43] <guest32424343> "E: Package 'libapache2-mod-auth-mysql' has no installation candidate" what does this mean?
[08:44] <hillary> am trying to format a flash disk in ubuntu 12.04 and i get Error creating file system: helper exited with exit code 1: cannot open /dev/sdb1: Read-only file system
[08:45] <dutchuss2016> ok im having an issue with the batch .sh file tht guide wants me to make
[08:45] <hillary> what could be the issue
[08:45] <dutchuss2016> im not gettign any errors wheen i try  to  run it but im also not streaming
[08:46] <dutchuss2016> thats kinda why i want somethign with a gui so i can tell if its running or not
[08:46] <r3s> hillary, have you seen this?  http://askubuntu.com/questions/365061/ubuntu-13-10-gives-package-libapache2-mod-auth-mysql-has-no-installation-cand
[08:46] <q0> can you kill a mosquito if you slap it hard enough in the air ?
[08:46] <r3s> sorry
[08:47] <q0> please help me
[08:48] <dutchuss2016> :(
[08:48] <ktosiek> q0: yes, and next time try ##physics
[08:48] <dutchuss2016> is  there anythign i can use tobroadcast that has a gui
[08:49] <MannerMan> I have a work laptop with Ubuntu 12.04 and Windows 8, now with 14.04 coming up, i would like to export the Ubuntu partition and do a test-upgrade in Virtualbox - Is this possible?
[08:49] <guest32424343> anyone know how to solute this issue "E: Package 'libapache2-mod-auth-mysql' has no installation candidate"
[08:50] <meet> when i pastebin from the terminal using pastebinit i am getting this error:http://pastebin.com/9X9sj1tm
[08:51] <meet> http://pastebin.com/9X9sj1tm
[09:01] <jellow> meet, sudo apt-get install python-configobj
[09:02] <meet> it sayss already installed and newest version jellow
[09:05] <DJones> meet: What release are you running, can you run cat /etc/issue and paste the result
[09:05] <meet> i am on mint16 which is based on 13.10 i guess DJones
[09:05] <DJones> meet: Mint isn't supported here, youll need to ask in the mint support channels
[09:06] <DJones> !mint | meet
[09:07] <jellow> meet, I've just tried on my system seems to work fine perhaps python version mis-match I would try mint support channels
[09:07] <aizae3ne> I wonder why Mint isn't supported... according to Distrowatch, it's pretty popular...
[09:07] <meet> jellow: ok.. thanks :)
[09:08] <DJones> aizae3ne: Its supported by its own developers, just not here because this channel only supports the official Ubuntu releases
[09:08] <aizae3ne> I see.
[09:15] <Yelu> MannerMan: It's possible: http://askubuntu.com/questions/34802/convert-my-physical-operating-system-to-a-virtualbox-disk and more generic under http://www.localizingjapan.com/blog/2011/03/05/virtualizing-a-linux-system-creating-a-linux-vm-p2v/
[09:15] <MannerMan> Yelu: Thanks, will check it out!
[09:45] <guest32424343>  #1045 Cannot log in to the MySQL server
[09:45] <guest32424343> hi i cant log into phpmyadmin i get this error " #1045 Cannot log in to the MySQL server"
[09:52] <dhruvasagar> guest32424343: perhaps mysql service is down
[09:53] <eizo> how to delete paste linux images? for instance when i do sudo apt-get autoremove linux-image-3.0.0-1*, for some reason it also selects 3.11
[09:58] <pbunny> hi
[09:58] <pbunny> what do i need to restart to make hotkeys work?
[09:58] <pbunny> they suddenly stopped working
[10:01] <trijntje> pbunny: hotkeys?
[10:01] <pbunny> trijntje: hotkeys.
[10:01] <Ascavasaion> If I installed an application from extracting it into a folder and using it ./install  How do I uninstall it again?
[10:01] <pbunny> keyboard shortcuts
[10:01] <pbunny> e.g. volume up / volume down / ...
[10:02] <pbunny> they suddenly stopped working, i need to get them back without restarting pc
[10:03] <Yelu> eizo: man apt-get => "If no package matches the given expression and the expression contains one of '.', '?' or '*' then it is assumed to
[10:03] <Yelu>            be a POSIX regular expression, and it is applied to all package names in the database. Any matches are then
[10:03] <Yelu>            installed (or removed). Note that matching is done by substring so 'lo.*' matches 'how-lo' and 'lowest'. If this is
[10:03] <Yelu>            undesired, anchor the regular expression with a '^' or '$' character, or create a more specific regular expression."
[10:03] <Yelu> !apt-get | eizo
[10:03] <pbunny> Ascavasaion ?
[10:04] <Yelu> eizo: don
[10:04] <Yelu> t use wildcards, dead simple
[10:04] <Ascavasaion> pbunny, I instalkled it using ./install and now I would like to remove it from the system please.
[10:04] <kamil_> hi
[10:04] <kamil_> how can i hear my voice from mic in speakers in realtime? gnome3
[10:05] <pbunny> trijntje: ideas?
[10:05] <eizo> Yelu: it doesn't explain why the regex linux-image-3.0.0-1* matched linux-image-3.11...
[10:05] <guest32424343> dhruvasagar i restarted
[10:05] <ljsoftnet> can somebody confirm assaultcubes master server is online, i cant connect to it
[10:05] <Rory> !ot > ljsoftnet
[10:05]  * Yelu thinking ...
[10:06] <trijntje> pbunny: I don't know, sorry. I was just confused about what you meant with hotkeys
[10:07] <dhruvasagar> guest32424343: make sure mysql is up and running, ps aux | grep mysql
[10:07] <eizo> Yelu: maybe the 3.11 something was a package which depended on the ones matched by my regex, and was thus removed automatically?
[10:07] <Baako> i am reconfig phpmyadmin because i came across this "mysql database name for phpmyadmin" and wanted to know if the name is "phpmyadmin"?
[10:09] <Yelu> eizo: then try it with the full package name of the desired package to remove. if you are right, the dependencies will also show up in the shell. - noob question: you have a backup, yes?
[10:09] <Yelu> eizo: or just add --dry-run
[10:10] <eizo> yes i have some back-ups; anyway now i removed everything with this deadly command at the end: https://help.ubuntu.com/community/Lubuntu/Documentation/RemoveOldKernels ; hopefully my computer reboots fine :)
[10:10] <Baako> i when with the default name "phpmyadmin" and got this error "an error acurred while installing the database" ERROR 1045(28000): ACCESS denied for user 'root@'localhost'(using password: YES)"
[10:10] <Yelu> eizo: nice.
[10:12] <Ascavasaion> If I installed an application after extracting it into a folder and using ./install  How do I uninstall it again?  I no longer want it on my system.
[10:14] <Yelu> Baako: If I remember right, you have to type the three letters "Y" "E" "S" as the password.
[10:15] <Baako> yelu what do you mean?
[10:17] <Yelu> Baako:_ if you are root and in the shell and you want to do something there with your sql instance as admin, then the password is "YES". - But I'm not absolutely sure --- long time age.
[10:18] <Baako> yelo mysql-u root -p                 my root user doesnt have an sql password
[10:19] <somsip> Baako: the -u root signifies the root mysql user. Not the root ubuntu user.
[10:21] <Baako> somsip i only have one user on this ubuntu 13.10 and its me john. so i think john is the root user
[10:21] <lolcat> Baako: liar liar
[10:21] <parapan> hi there anyone good with graphic cards ? I actually have this problem in windows but I need help identifying the root of the problem ....
[10:21] <aeon-ltd> parapan: explain how this relates to ubuntu
[10:22] <lolcat> Baako:  cut -d: -f1 /etc/passwd
[10:22] <lolcat> Baako: I have like 25 accounts after a default ubuntu instal
[10:22] <pinnen> so
[10:22] <somsip> Baako: ubuntu may have john, root and whatever other users. mysql might have root too. It is not the same as the ubuntu root user. It has a password allocated when mysql-server is installed
[10:22] <pinnen> big relase day today?
[10:22] <Baako> lolcat i just install ubuntu 13.10 for the first time 4 days ago
[10:22] <pinnen> 14.04
[10:23] <parapan> aeon-ltd: it's related with the hardware maybe ? even ubuntu is using graphic cards .....did I done well explaining this in order to qualify for an answer ?
[10:23] <pinnen> or maby not? :)
[10:23] <somsip> pinnen: no, 17th https://wiki.ubuntu.com/TrustyTahr/ReleaseSchedule
[10:23] <parapan> aeon-ltd: here's another one .....I use ubuntu right now ....
[10:23] <pinnen> somsip: ohh ok, thanks for the info m8 :)
[10:23] <lolcat> Baako: then you have like 20 users
[10:23] <Baako> lolcat what is that command
[10:23] <lolcat> Baako: it will give you a list of the user accounts on your system
[10:24] <keevitaja> hi, i installed numix gtk theme on ubuntu 12.04 lts. where can i change it?
[10:24] <aeon-ltd> parapan: ask the question if the problem exists in ubuntu, there are better channels to ask about general hardware problems though
[10:24] <Rory> !info unity-tweak-tool | keevitaja
[10:24] <Ascavasaion> If I installed an application after extracting it into a folder and using ./install  How do I uninstall it again?  I no longer want it on my system.
[10:24] <pinnen> somsip: I can still install the 14.04 freeze-release, and just update when they release it 17:th? And it will be the same as the final release yes? :)
[10:25] <Rory> pinnen: Yes and yes
[10:25] <pinnen> Rory: goodie :)
[10:25] <setra> is this the right form for mysqlhotcopy problems?
[10:25] <thewisenerd> gtk themes can be set in the "appearance" sub-menu in ubuntu settings, if i remember right :)
[10:25] <setra> channel .. of course
[10:25] <Baako> lolcat http://pastebin.com/hWTWNKGV
[10:25] <Baako> lolcat in line 35 you can see john whom i log in as
[10:27] <Yelu> Baako: I was wrong. - The "YES" only stands for (Yes have a SQL-Account-password set => parameter "-p"). Otherwise it would read "NO" at this point.
[10:27] <lolcat> Baako: but you see, you were wrong. You are welcome for the correction.
[10:27] <CatKiller> hi
[10:27] <Baako> lolcat didnt know ubuntu install those other onces thought it just root and john
[10:27] <lolcat> Now you do
[10:27] <Baako> indeed
[10:28] <parapan> let's try another ....does anyone is playing clash of clans under ubuntu ??
[10:28] <Baako> parapan i play castle clash much better :p
[10:28] <parapan> is anyone familiar with genymotion android emulator ?
[10:29] <parapan> Baako: do you play under ubuntu ?
[10:29] <Rory> parapan: Ask your real support question :)
[10:29] <Rory> !details | parapan
[10:29] <Baako> parapan i use bluestack on windows i have had time to research into ubuntu
[10:30] <keevitaja> Rory: it doesn't seem to be available for precise...
[10:30] <keevitaja> Rory: http://ppa.launchpad.net/freyja-dev/unity-tweak-tool-daily/ubuntu/dists/
[10:30] <parapan> Rory>it's complicated ....basically when running clash of clans under android emulator the 3D details of the game are not shown - aka fighters, buildings etc ....only the labels above them ....
[10:30] <parapan> Rory >does this seems logical to you ??
[10:30] <Rory> keevitaja: I searched on Google for "Ubuntu 12.04 change GTK theme" and found this, perhaps it will be useful http://hackerspace.lifehacker.com/a-short-guide-to-customizing-ubuntu-12-04-lts-for-beg-595909239
[10:31] <parapan> Baako: super ....do you encoutered this issue ? of not seeing the 3D details from the map ?
[10:31] <Yelu> Baako: Not sure about your versions (OS, SQP-DB ...) but if you want, take a look here https://dev.mysql.com/doc/refman/4.1/en/resetting-permissions.html
[10:31] <keevitaja> Rory: thanx. how can i remove repository from apt-get?
[10:32] <parapan> Baako: i basically see only the green field, and the labels over the buildings when you have to collect mine products and elixir ....
[10:32] <parapan> Baako: could this be from the video card ?
[10:32] <Ascavasaion> If I installed an application after extracting it into a folder and using ./install  How do I uninstall it again?  I no longer want it on my system.
[10:33] <Rory> keevitaja: Open Software Sources program, go to Other Software, and untick the relevant repository from the list
[10:33] <Rory> Ascavasaion: You would have to look at what ./install did, and manually remove each file
[10:33] <Rory> Ascavasaion: Assuming the program doesn't come with an uninstall utility
[10:33] <Ascavasaion> Rory, then I am screwed.
[10:33] <Rory> Ascavasaion: And in future, use the package manager where possible
[10:33] <Baako> unix socket or tcp/ip? which "connection method for mysql database of phpmyadmin" for localhost useage only?
[10:34] <Rory> Baako: It doesn't really matter, but I'd go with unix socket if you are only ever going to se it locally
[10:34] <Rory> s/se/use
[10:35] <ljsoftnet> can somebody confirm assaultcubes master server is online, i cant connect to it
[10:36] <Rory> !ot | ljsoftnet
[10:40] <ocooel> Who can help me sort out my hdd..? http://paste.ubuntu.com/7249033/
[10:41] <keevitaja> Rory: thanx, it worked!
[10:43] <keevitaja> if i install 14.04 today, do i have reinstall it when the final is released later this weak?
[10:43] <Yelu> Baako: Better explanation with readable checklist - see https://superuser.com/questions/446764/cant-login-in-phpmyadmin-and-mysql-after-fresh-installation-of-lamp-server-and
[10:43] <Yelu> What's your situation?
[10:43] <Rory> keevitaja: no
[10:44] <keevitaja> Rory: incase there are bugfixis i just update packages which have been changed?
[10:44] <Rory> keevitaja: You only need keep it up-to-date. I've been running Trusty (14.04) for about 3 weeks now
[10:44] <Guest51928> http://www.mediaoncloud.com/recover-mysql-root-password-from-linux-server-admin/
[10:44] <keevitaja> Rory: so current RC may be exactly the same as final relase?
[10:45] <Guest51928> http://www.mediaoncloud.com/recover-mysql-root-password-from-linux-server-admin/
[10:45] <Rory> keevitaja: Ideally they're identical
[10:45] <Rory> keevitaja: In real life there tends to be a few packages which get updated
[10:46] <Rory> keevitaja: Generally, try to discuss Trusty in #ubuntu+1
[10:46] <keevitaja> ok, last question. where do i download it?
[10:47] <keevitaja> http://cdimage.ubuntu.com/daily-live/current/
[10:47] <keevitaja> this place?
[10:55] <Yelu> Baako: if you didn't set a password for your sql-root-user (not your system-root-user) then try this: mysql -u <sql-root-username> (without "-p" parameter)
[10:58] <adam__> Does anyone know how to change the default permissions when creating a new file?
[10:59] <tgm> Does anyone know how to install node and npm on ubuntu 13.04?
[11:01] <guest32424343> how do i make a directory writeable?
[11:05] <adam__> @tgm i recommend to not use the default package manger to install this, due to the fact that it will be installed globally, ie. for every global node package you need to install with sudo. Install it manually. Locally
[11:05] <adam__> Here you go: https://gist.github.com/isaacs/579814
[11:08] <fa7ad> By mistake i did a "chmod -vR 644 /" as root. So i couldnt access anything. And then i booted into a slotaz live cd and did chmod 777 recursively on that drive. Most of the stuff is fine but i cant sudo and most pf the files still have 644. How do i fix this without re installation
[11:08] <clamiax> hi there
[11:09] <fa7ad_> fa7ad By mistake i did a "chmod -vR 644 /" as root. So i couldnt access anything. And then i booted into a slotaz live cd and did chmod 777 recursively on that drive. Most of the stuff is fine but i cant sudo and most pf the files still have 644. How do i fix this without re installation
[11:09] <Yelu> guest32424343: chmod a+x </my/directory> for the directory itself and maybe chown <user>:<group>
[11:10] <Yelu> <
[11:10] <Yelu> /m</directory>
[11:10] <fa7ad_> Problem is i cant login as root only as a normal user
[11:11] <guest32424343> Yelu "sudo chmod a+x /var/www/Working/yiiRoot/blog/protected"
[11:11] <Yelu> guest32424343:  sorry  chown <user>:<group> </my/directory>
[11:11] <guest32424343> yelus is that correct
[11:11] <Yelu> guest32424343: try it?
[11:11] <guest32424343> Yelu i dont know how to make a chmod user group
[11:12] <freemyth> fa7ad_, chmod 6755 /usr/bin/sudo
[11:12] <freemyth> sudo works only if it is suid
[11:12] <freemyth> also su, ping and login
[11:12] <Yelu> this is only optional in case you want to change the owner and the group of that directory
[11:12] <betabertus8899> hey guys
[11:13] <betabertus8899> can i install office 2013 yet in ubuntu?
[11:13] <mago_> hello! since today my Ubuntu 12.04 LTS has not been able to apt-get install packages. I get the unrecoverable error " syntax error: unknown group 'root' in statoverride file". If I look into  /var/lib/dpkg/statoverride, there are multiple lines mentioning "root", although my system does not seem have such group. Any ideas on what went wrong?
[11:13] <guest32424343> Yelu still getting an error on my application "Application runtime path "/var/www/Working/yiiRoot/blog/protected/runtime" is not valid. Please make sure it is a directory writable by the Web server process."      even if i ran that command "sudo chmod a+x /var/www/Working/yiiRoot/blog/protected"
[11:13] <freemyth> fa7ad_, chmod 6755 /usr/bin/sudo /usr/bin/login /usr/bin/su to get sudo back
[11:13] <freemyth> They only works with effective suid
[11:14] <freemyth> oh no he's gone again
[11:14] <DJones> betabertus8899: Probably the best place to ask that will be in ##winehq, people there may be able to advise you on whether it will work under wine
[11:14] <llutz> guest32424343: "sudo chmod a+x /var/www/..."" makes the dir accessible, not writable
[11:14] <betabertus8899> ok great thanks!
[11:15] <guest32424343> llutz so it will be a+w instead of a+x?
[11:15] <ocooel> Help with hard disk.. http://paste.ubuntu.com/7249177/
[11:15] <llutz> guest32424343: if you want ALL to be able to write there, yes.
[11:17] <guest32424343> llutz i only want the current user who is logged in right which is me john
[11:17] <adam__> Does anyone know how to change the default permissions when creating a new file?
[11:17] <adam__> Does anyone know how to change the default permissions when creating a new file?
[11:20] <guest32424343> llutz  so?
[11:22] <bregma> adam__, google for how to use the umask command
[11:23] <betabertus8899> should i upgrade from ubuntu 13.10 now or wait for the stable 14.04?
[11:24] <bekks> betabertus8899: If you ask like that - wait. :)
[11:27] <ocooel> bekks, can you help with this..? http://paste.ubuntu.com/7249177/
[11:28] <bekks> ocooel: Replace the disk, since it has at least one bad sector, which unluckily is where the superblock should be written to.
[11:28] <betabertus8899> haha ok
[11:28] <Malsasa> My HUD on Precise doesn't work anymore. When I tap ALT, Unity opens menu of focused app, not the HUD. My complete question was in http://askubuntu.com/questions/447587/alt-key-for-hud-doesnt-work. Sorry for my bad English. Thank you.
[11:30] <WyRe> hi guys
[11:31] <WyRe> i need resize my ubuntu extended partition
[11:31] <WyRe> but cant i ... :S
[11:31] <WyRe> i am trying with gparted in a cdlive
[11:31] <WyRe> but... cant i edit the extended partition ... :S
[11:31] <bekks> WyRe: Disable swap.
[11:31] <WyRe> mmm
[11:31] <WyRe> how?!
[11:32] <WyRe> ok
[11:32] <WyRe> :D
[11:32] <ocooel> bekks: thanks
[11:32] <bekks> ocooel: you're welcome :)
[11:34] <WyRe> bekks: thanks!?! :P
[11:37] <troulouliou_dev> hi any idea how i can assign the same host name in dhcpd to a single laptop with multiple interfaces/mac adresses ?
[11:40] <dingus> hey guys i have a real stupid noob question here
[11:41] <dingus> i just tried to merge to directories, both containing alphabetized subdirectories
[11:41] <dingus> literally 2 folders with subfolders "a-z"
[11:41] <dingus> except, one is "A-Z" and the other is "a-z"
[11:41] <dingus> is there some freakin way to merge "A" with "a" etc
[11:42] <dingus> without going in to one case of every letter, ctrl-click cutting everything then going in to the other case and pasting?
[11:42] <dingus> no smooth way to just click "A" and "a" and say "merge" ? :(
[11:43] <bekks> dingus: No way, no. Rename A-Z to a-z or vice versa, then merge.
[11:43] <dingus> doooooooooooh
[11:44] <Proshot> i was wondering where is the config file for this welcome screen in ssh on ubuntu http://pastebin.com/46THn4se
[11:45] <bgardner> Proshot: /etc/update-motd.d
[11:46] <bgardner> Proshot: See: man update-motd
[11:46] <Proshot> cool thanks bgardner
[11:46] <bgardner> Proshot: You're welcome :)
[11:54] <Foorack> Hey, anyone here that know's if it is possible to force one standalone program to use a proxy..?
[11:55] <schnitzl> i have 2 users with 2 home directories. i want that user1 can axess user2's homeDirectory. they are both in the group samba. Home from user 2 is owned by user 2 and group samba. then i did "chmod -R g+rwx user2-home" but i still cant axess as user1 the home folder from user2
[11:55] <dusf123> can i just try installing ubuntu 13.04 as normal on a drive already containing uefi Windows 8.1 or do i have to go messing with fast boot first?
[11:58] <Chotaz> Hey guys, I have an external hard drive that doesnt automount and doesnt show up on fdisk -l, should I assume it to be dead, or is there anything i can do to try and save it? it does show up on lsusb
[12:00] <Rory> Chotaz: Just to be absolutely sure, you are running fdisk -l with sudo?
[12:00] <Chotaz> Rory: yes
[12:00] <Rory> Chotaz: Can you pastebin the relevant part of lsusb?
[12:01] <Rory> If it's one line just stick it in channel
[12:01] <ikonia> !info lmms
[12:02] <Chotaz> Rory: here is lsusb followed by fdisk -l, I think its stuck trying to list the devices on fdisk
[12:02] <Chotaz> http://paste.ubuntu.com/7249318/
[12:02] <Rory> Chotaz: And I assume the device isn't /dev/sdb ? ie you are expecting to see a /dev/sdc etc?
[12:03] <Chotaz> Rory: exactly, I was trying to see if the drive is actually dead or stuck in some state where i can manage to recover it
[12:03] <Chotaz> Rory: this device was working just fine yesterdat and died on me just before i got here
[12:04] <Rory> Chotaz: Can you try unplugging the drive, then running "sudo modprobe usb_storage" then re-plugging?
[12:04] <Chotaz> Rory: sure gimme 2 mins
[12:04] <Rory> I wouldn't get your hopes up though
[12:05] <Chotaz> Rory: just did what you stated, what should I be looking at_
[12:06] <Rory> Chotaz: You should be seeing if it works now
[12:07] <Chotaz> Rory: no automount fdisk still doesnt list, but if I go to /dev/ through the file explorer, theres an sdc file there
[12:07] <dusf123> can i just try installing ubuntu 13.04 as normal on a drive already containing uefi Windows 8.1 or do i have to go messing with fast boot first?
[12:08] <bekks> dusf123: 13.04 is end of life since January. You should not use it anymore at all.
[12:08] <schnitzl> i have 2 users with 2 home directories. i want that user1 can axess user2's homeDirectory. they are both in the group samba. Home from user 2 is owned by user 2 and group samba. then i did "chmod -R g+rwx user2-home" but i still cant axess as user1 the home folder from user2
[12:08] <kostkon> dusf123, wait another 3 days and install 14.04
[12:08] <Chotaz> I guess im in this bad luck wave with disks, it-s the third that dies on me in the past month or so, on different computers
[12:09] <Rory> Chotaz: Does fdisk show any mention of /dev/sdc at all, even without any partitions?
[12:10] <Chotaz> Rory: I think the terminal gets stuck after listing /dev/sdb because it just hangs there, doesnt allow me to input any other commands to the terminal
[12:11] <Chotaz> Rory: almost like it froze trying to read from sdc_
[12:11] <Rory> Chotaz: OK that's interesting. What happens if you try to dump the contents of /dev/sdc to a file? (dd if=/dev/sdc of=/path/to/somefile)
[12:11] <Ben64> Chotaz: pastebin the output of "dmesg" and also "sudo parted -l"
[12:12] <me-1> hi....what is the release date for ubuntu 14.04 LTS..?
[12:12] <Rory> Chotaz: Do Ben64's suggestion first
[12:12] <Rory> !trusty | me-1
[12:12] <Rory> me-1: 17th
[12:12] <Chotaz> Rory: Ben64 , be back ina  few then
[12:13] <guest32424343> how do i move all connect in a folder (not the folder itself but only things inside it) to a different folder and replace everything inside that folder?
[12:13] <me-1> Rory,  thank you for the info . what is the best method to upgrade I am upgrading from 12.04
[12:13] <kostkon> me-1, you'll get notified to upgrade on the release day or 1-2 days after
[12:15] <Rory> me-1: After release, there will be an option in the normal update manager
[12:15] <Rory> guest32424343: mv /path/to/folder/* /path/to/destination/
[12:15] <Chotaz> Rory:  Ben64 > dmesg:  http://paste.ubuntu.com/7249382/    sudo parted -l:  it just hangs there, no real output
[12:15] <me-1> kostkon,  should I upgrade throgh apt-get or from USB flash drive..?
[12:15] <Rory> me-1: neither, you should upgrade using do-release-upgrade
[12:16] <Rory> me-1: Or using the option in the normal update manager, which will notify you when a release upgrade is available
[12:16] <Ben64> Chotaz: yep, something sure is broken
[12:16] <kostkon> me-1, neither. when ubuntu will ask you if you want to upgrade, press the upgrade button
[12:16] <Rory> Chotaz: Buffer I/O error on device sdc, logical block 52
[12:16] <Rory> Chotaz: That's broken, sorry :(
[12:16] <Ben64> Chotaz: i'd suggest taking the drive out of the enclosure and trying another one if possible
[12:16] <me-1> Rory,  I know , but somebody told me to download iso and upgrade by booting from it
[12:17] <Chotaz> Ben64: lucky for me i have a SATA bridge here
[12:17] <kostkon> me-1, that's not necessary
[12:17] <Chotaz> Ben64: but i think this is still on warranty, so i-ll try that first!
[12:17] <Chotaz> Ben64: the files inside are the real problem, last semestre is gone
[12:18] <me-1> kostkon, Rory  what will happen to my apps I have installed after upgrading
[12:18] <Rory> me-1: They will remain
[12:18] <Chotaz> Rory, Ben64 : thanks a bunch for the help guys!
[12:18] <guest32424343> Rory i did it and it asked "mv: inter-device move failed: ‘/home/john/Documents/yiiroot/README’ to ‘/var/www/Working/yiiRoot/README’; unable to remove target: Permission denied mv: try to overwrite ‘/var/www/Working/yiiRoot/requirements’, overriding mode 0755 (rwxr-xr-x)?"
[12:19] <Rory> guest32424343: preface the command with "sudo" because you don't have permission as "john" to write to /var/www/Working
[12:19] <guest32424343> Rory if i type in "yes" will override it? also will it keep asking to type "yes"
[12:19] <me-1> Rory, thank you for your time and info
[12:19] <NoSpoon42> hi when I try to login into linux shell I get login incorrect, is this different from my account login?
[12:20] <Rory> NoSpoon42: No they are the same, are you sure you're typing your username correctly?
[12:20] <Rory> NoSpoon42: Where are you trying to log into the shell?
[12:20] <NoSpoon42> Rory, I press ctr+alt+f1
[12:21] <Rory> NoSpoon42: Yes that's the same username. The username is the short, single word one, aka "john" rather than "John Smith"
[12:21] <Rory> guest32424343: use "mv -f"
[12:21] <Rory> guest32424343: man mv
[12:21] <NoSpoon42> I tried usual login which is in accounts and one which in terminal, anyway login is incorrect
[12:22] <guest32424343> Rory "sudo man mv "
[12:22] <Rory> NoSpoon42: I don't know what to suggest... try typing your password as the username so you can see what letters are being typed; perhaps there's some keyboard layout issue? I know I had problems when I had a password with # in it, and it kept reverting to a US keyboard
[12:22] <Rory> guest32424343: type in "man mv" and read
[12:22] <NoSpoon42> tried it)
[12:23] <NoSpoon42> keyboard is ok, I really don't get why login is always incorrect
[12:23] <NoSpoon42> I'll try again
[12:24] <NoSpoon42> nope, linux doesn't love me
[12:24] <guest32424343> Rory i got this "mv: inter-device move failed: ‘/home/john/Documents/yiiroot/framework’ to ‘/var/www/Working/yiiRoot/framework’; unable to remove target: Is a directory mv: inter-device move failed: ‘/home/john/Documents/yiiroot/requirements’ to ‘/var/www/Working/yiiRoot/requirements’; unable to remove target: Is a directory mv: inter-device move failed: ‘/home/john/Documents/yiiroot/yiiblog’ to ‘/var/www/W
[12:26] <m0e__> is there a way of installing vserver under 12.04 LTS? seems the oldes stable kernel is 2.6.22.19
[12:27] <bekks> m0e__: Do you want to host vservers yourself, or do you have a vserver and want to upgrade to 12.04?
[12:28] <m0e__> host my own vservers
[12:29] <m0e__> it's n preinstalled 12.04 rootserver @ strato
[12:29] <m0e__> so ubuntu 12.04 was best choice while debian isn't available with this plesk thing (i don't need it but some others here)
[12:29] <dusf123> bekks, kostkon: i will wait a few days for 14.04. Can install as normal or will i have to go messing with fast boot and secure boot because the drive already has Windows 8.1 uefi gpt?
[12:30] <kostkon> !efi
[12:36] <Busybyeski> trying to run a java applet in chrome and openjdk runtime isn't being recognized?  do i need a special browser plugin?
[12:42] <jellow> Busybyeski,  have you installed icedtea-7-plugin ?
[12:43] <Busybyeski> jellow: no i saw it in the repository but it looked like it was all dependencies
[12:45] <jellow> Busybyeski,  Yes can be hard to tell but it is needed to run java applets within chrome.
[12:48] <Busybyeski> jellow: working as intended now, thanks!
[12:49] <jellow> Busybyeski, excellent :)
[12:55] <dusf123> kostkon: thanks, i read that already, but i am wondering if there is any chance ubuntu will just install properly without messing with fast boot and secure boot where Windows 8.1 uefi gpt is already installed on the drive?
[13:09] <aaronr> Hey #ubuntu. So I'm trying to run a 32-bit app on Ubuntu 14.04 (64-bit) that requires libsm6. I've got libsm6 installed, but there doesn't seem to be a libsm6:i386 package. Oddly libsm6 does exist in the 32-bit version of 14.04 according to Launchpad. I'm confused. How do I get the 32-bit version of libsm6 so that my app can run?
[13:11] <llutz> !14.04 | aaronr
[13:11] <jellow> aaronr, I can confirm it is in 13.10
[13:12] <aaronr> thanks llutz will go ask in there.
[13:12] <aaronr> jellow: yeah saw that. odd. perhaps something changed, or it's just not ready yet.
[13:18] <felixonmars> hi, i'm having a problem running apt-get dist-upgrade: invoke-rc.d: initscript hv-kvp-daemon, action "start" failed.
[13:18] <felixonmars> it's an ubuntu 14.04 on windows azure, any idea?
[13:18] <ActionParsnip> felixonmars: what is the output of:  cat /etc/issue
[13:18] <ActionParsnip> felixonmars: ask in #ubuntu+1 for trusty support
[13:18] <felixonmars> Ubuntu 14.04 LTS \n \l
[13:18] <felixonmars> oh, thanks.
[13:19] <ActionParsnip> felixonmars: trusty is not supported here til after release daya
[13:19] <felixonmars> ActionParsnip: i see, thank you!
[13:19] <jdabinett_> hey guys, does anyone know why an apt-get update (and or dist upgrade) won't get the new ssl /ssl libs version to fix heartbleed?
[13:20] <jdabinett_> even manually wgetting the packages and dpkg -i them didn't work
[13:20] <bekks> jdabinett_: Which ubuntu version do you have?
[13:20] <jdabinett_> bekks: 12.04
[13:20] <jdabinett_> bekks: 12.04.4 *
[13:21] <amir_eldor> I fail to checkinstall boost 1.55.0, is this the right channel?
[13:23] <bekks> jdabinett_: which package version of openssl is installed on your system?
[13:23] <jdabinett_> OpenSSL 1.0.1
[13:23] <jdabinett_> bekks: *
[13:23] <bekks> jdabinett_: Thats not the package version.
[13:23] <betabertus8899> how does the ubuntu dual gpu work?
[13:23] <betabertus8899> like where can i find drivers for that?/
[13:23] <Pici> jdabinett_: what is the version of the package though. apt-cache policy libssl1.0.0
[13:23] <bekks> betabertus8899: There is no ubuntu dual gpu. Maybe your system has a hybrid graphics system.
[13:24] <jdabinett_> bekks: libssl1.0.0:   Installed: 1.0.1-4ubuntu5.12   Candidate: 1.0.1-4ubuntu5.12
[13:24] <bekks> jdabinett_: Thats the updated and fixed package version.
[13:24] <kostkon> jdabinett_, openssl version -a   check the build date
[13:24] <amireldor> Not sure if my message was received. `sudo checkinstall b2 install` fails
[13:24] <llutz> jdabinett_: https://launchpad.net/ubuntu/+source/openssl/1.0.1-4ubuntu5.12
[13:25] <Pici> jdabinett_: http://www.ubuntu.com/usn/usn-2165-1/ too
[13:26] <jdabinett_> bekks: what about this?
[13:26] <bekks> jdabinett_: What about what?
[13:26] <keevitaja> any chanche i could try installing 13.10 package on 14.04?
[13:26] <jdabinett_> bekks: im not sure what you mean for me to do
[13:26] <bekks> jdabinett_: According to all links given, you already have the fix installed.
[13:26] <bekks> jdabinett_: You should read the links given.
[13:27] <bekks> keevitaja: Sure, but you may bust your system doing so,
[13:28] <keevitaja> bekks: how do i do this?
[13:28] <guest32424343> hwo to make a folder writeable and readable. I want to make "/var/www/Working" writable and readable. "Working" is a folder which has other folders inside of it
[13:28] <llutz> !permissions| guest32424343
[13:28] <notrev> guest32424343, man chmod
[13:28] <bekks> keevitaja: You dont. I will not guide you on how to break your system.
[13:29] <m0e42> what is the prefered method of runnin win7 in an vm on an root server. os is ubuntu 12.04 lts
[13:29] <m0e42> i use promox here on a local machine. but it's only available as an iso so i can't use it on the server
[13:29] <m0e42> the thing is i will not admin the system, i need an web/x based setup for an unexperienced user. cli wont do the trick for him ;). the problem is i can't install an own image so i had to set it up by hand
[13:29] <ActionParsnip> m0e42: what is a 'root server'?
[13:31] <m0e42> you know hosted servers like server4you or hetzner? no vserver, it's a bare xeon maschine
[13:31] <ActionParsnip> m0e42: then what is 'root' about it?
[13:31] <ActionParsnip> m0e42: do you mean like an ESX host?
[13:31] <bekks> ActionParsnip: basically an abbreviation for full access.
[13:32] <m0e42> yep
[13:32] <ActionParsnip> m0e42: then that's not a 'root server', it's not even a thing
[13:32] <ActionParsnip> bekks: dude is basically making up words
[13:32] <Archos> Hehe
[13:32] <OnkelTem> Hi all
[13:33] <bekks> ActionParsnip: I just read his backlog. Indeed he is.
[13:33] <ActionParsnip> m0e42: you can run ESX in headless mode and manage it using the virtual infrastructure client
[13:34] <m0e42> esx is also only available as an iso. so it won't work. i can only install a few os on the server. Ubuntu12.04/centOS and windows2003
[13:35] <ActionParsnip> m0e42: virtualbox then (maybe)
[13:35] <m0e42> o.O
[13:35] <bekks> m0e42: Install the hypervisor of your choice and create a vm.
[13:37] <m0e42> yep thats workin for me. but i also need a DAU safe interface, prefered webbased
[13:38] <bekks> m0e42: Then installed the webbased solution for your chosen hypervisor.
[13:39] <bekks> m0e42: And letting people access and deal with the hypervisor is a BAD idea when they have no clue about it. The best example is a Windows 7 VM on a publically reachable server on the internet. Dont do it. Dont. Do not.
[13:40] <guest32424343> i have to use terminal to access /var/www/ is they any where i can access it without using terminal? the "files" application(default ubuntu files) doesnt have an upper level
[13:40] <m0e42> thats what i thought too. thing i will setup a webvirtMgr on this machine and setup the neccessary vms myself.
[13:40] <bekks> m0e42: You just shouldnt setup a Windows desktop on the internet.
[13:41] <m0e42> i won't set the vm public accessable. only from our VPN
[13:42] <bekks> m0e42: As long as the server is reachable on the internet, it is reachable on the internet.
[13:42] <ActionParsnip> bekks: unless you set access rules in iptables etc ;)
[13:43] <m0e42> not if i set an internal ip and set my iptables right
[13:43] <m0e42> the windoze machine won't get an public IP. only a VPN ip
[13:43] <bekks> m0e42: Then hopefully your user will be able to deal with that too.
[13:44] <Guest94072> hello?
[13:44] <m0e42> i hope so... don't like such scary configs.
[13:45] <Guest94072> Hey, I was wondering where I can download the non-wubi.exe version of ubuntu so that I can burn it onto a DVD
[13:46] <ikonia> Guest94072: there isn't an ubuntu.exe
[13:46] <ikonia> Guest94072: you need to download an ISO image
[13:46] <Guest94072> I know, but the last image I downloaded was the windows installer version, where can I get a bootable version
[13:47] <ikonia> Guest94072: you need to get an iso and burn it to a bootable media (dvd/usb stick etc)
[13:47] <Pici> Guest94072: they all are bootable versions.
[13:48] <Touhou11> Guest94072: It's possible to make a Linux distribution show a Windows "installer" in addition to being bootable, they're not exclusive
[13:48] <glambert> what is this RTNETLINK answers: file exists message supposed to mean when trying to do an ifup?
[13:48] <Guest94072> No, I downloaded an image from the ubuntu website and when I burned it, there was a file called Wubi.exe on it
[13:49] <Guest94072>  Oh, I think I've realised what happened.
[13:50] <Guest94072> Secure boot was enabled in my bios settings, that might be the problem
[13:52] <Touhou11> I believe recent versions of Ubuntu are signed with a key, so Secure boot shouldn't need to be disabled
[13:53] <Guest77325> http://www.marketglory.com/strategygame/galahad1st for online gamers, if you didn't already, use this link to register on MerketGlory: a free2play financial strategy game where virtual currency can be converted into real money. It starts out slow but in time you can turn a good profit that is if you have the necessary patience to grow a little bit every day :P
[13:53] <m0e42> ubuntu > 12.04 supports secureBoot and UEFI
[13:54] <vegetables173646> Hello, how could I see what applications are using my network, I have constant output of ~ 180K all the time, dont think thats normal
[13:55] <bregma> vegetables173646, 'sudo netstat -nap' is a start
[13:55] <Touhou11> vegetables173646: A tool called "nethogs" is very useful for this
[13:56] <vegetables173646> Touhou11: yes Im trying it right now, but it seems to only show incoming data
[13:56] <glambert> I've got metrics set up for each interface and none of them are using the same gateway
[13:56] <glambert> bloody irritating
[13:57] <Touhou11> vegetables173646: For my server it shows separate columns for "sent" and "received" data, so not sure what you mean
[13:59] <vegetables173646> Touhou11, hmm yes you are right, perhaps something is wrong with my conky. It shows completely different data
[14:00] <guest32424343> i keep getting "souce folder is not wirtable" from netbeans and i have try different different appropriate permissions for it and it all looks right http://pastebin.com/kQ3SH4TR
[14:01] <guest32424343> the folder i am trying to access is "dev"
[14:01] <CaptnBlackbeard> hey guys i'm trying to install ubuntu from usb to a eee netbook that has currently xp win on it
[14:02] <CaptnBlackbeard> its not detecting an operating system
[14:02] <CaptnBlackbeard> after i boot
[14:02] <bregma> guest32424343, those perms look wrong to me, unless you're logged in as user 'www-data'
[14:02] <Touhou11> CaptnBlackbeard: Checked the BIOS for the configured boot order?
[14:03] <guest32424343> bregma ht user i am log in as (GUI) is in the www-data group
[14:04] <Pici> guest32424343: did you just add your user to that group?
[14:04] <CaptnBlackbeard> Touhou11 yea
[14:04] <guest32424343> Pici i did yesterday and did it again today
[14:05] <CaptnBlackbeard> i can select to boot after i leave bios and press esc
[14:05] <Pici> guest32424343: have you logged out or rebooted since then?
[14:05] <guest32424343> Pici nope
[14:05] <Pici> guest32424343: well, you need to do that for group membership changes to take effect.
[14:05] <CaptnBlackbeard> but it doesn't detect a os on the usb
[14:05] <guest32424343> Pici alright
[14:06] <jhutchins> CaptnBlackbeard: Did you check the md5sum of the iso?
[14:06] <jhutchins> CaptnBlackbeard: How did you create the USB?
[14:07] <guest32424343> how do i stop ubuntu from asking for password when a computer restart?
[14:07] <CaptnBlackbeard> jhutchins unetbootin
[14:07] <CaptnBlackbeard> i didn't check
[14:09] <slikts> so when the fuck will 13.10 get an openssl update?
[14:09] <bekks> slikts: It already did.
[14:09] <DJones> slikts: It already has
[14:09] <GraemeLion> slikts: Um.. it has?
[14:09] <bekks> !sslbug | slikts
[14:09] <slikts> how come mine is still at 1.0.1e
[14:09] <bekks> slikts: read the links then.
[14:09] <Pici> slikts: 1) mind your language 2) it was done less than 3 hours after the ssl commit.
[14:09] <wheatthin> guest32424343, are you trying to restart from commandline?
[14:10] <Pici> slikts: because it was patched into the ssl version that your release normally ships with.
[14:11] <guest32424343> wheatthin am thousands of miles away from my pc and i need to reboot it after reboot i want it to log in automatically.
[14:11] <guest32424343> guest32424343 then i want temviewer to start and i can then take control of my pc again
[14:12] <Pici> guest32424343: like I said, you could just log out and then log back in. you don't need to reboot.
[14:12] <guest32424343> Pici am using
[14:13] <guest32424343> Pici am using teamviewer to remote desktop  so i need to NOT for ubuntu to ask for password :D
[14:13]  * cce7 is wondering, in trusty, what happened to the gnome-panel... I use xmonad, and really like the 2d panel that I used to see wireless, logout, etc.  
[14:13]  * cce7 should ask on +1 ?
[14:13] <techfreak243> hello, i am having troubles with getting my wireless drivers installed on my Ubuuntu 13.10
[14:13] <DJones> cce7: +1 is best for that
[14:15] <techfreak243> my laptop its runnuing on is a Dell Inspiron 15r (5520) with a broadcom wireless card with integrated bluetooth 4.0
[14:15] <ActionParsnip> !broadcom
[14:16] <Felishia> how do I install ubuntu in a computer that has kubuntu?...
[14:16] <Felishia> without deleting anything... specially my dev-libraries
[14:16] <ActionParsnip> Felishia: install the ubuntu-desktop   meta package, the OSes under the hood are identical
[14:16] <Felishia> I was thinking about sudo apt-get install ubuntu-desktop
[14:17] <Felishia> ActionParsnip, is it as I said?... sudo apt-get install ubuntu-desktop
[14:17] <Felishia> I don't want to take risks!
[14:17] <ActionParsnip> Felishia: where is the risk?
[14:18] <Felishia> ActionParsnip, my dev libraries overriden, including qt dev libraries
[14:18] <ActionParsnip> Felishia: if you are worried thenrun a full backup of your data and you'll be fine
[14:18] <ActionParsnip> Felishia: the libraries will not be touched by adding the new session
[14:19] <Felishia> ActionParsnip, and will the jvm work properly then?
[14:19] <Felishia> I mean I have a problem with the jvm on kubuntu
[14:19] <Felishia> suddenly fails
[14:19] <jhutchins> The fix for the heartbleed bug confused a lot of people because most distributions simply patched the specific code and incremented the least significant value of their version number, leaving the primary version number matching the upstream version that still had the problem (1.0.1e), while upstream OpenSSL incremented the major version to 1.0.1g.
[14:19] <ActionParsnip> Felishia: yes, you will just have another option to log in to in the login screen, nothing more
[14:20] <Felishia> specially when saving a file, which is totally ridiculous, sometimes I can't save my file on eclipse neither do recover
[14:20] <Felishia> ActionParsnip, I think you're not getting me, I want to install ubuntu-desktop because I'm having trouble with the jvm on kubuntu
[14:21] <Felishia> and I wonder if they'll be solved
[14:21] <john_doe_jr> is there something like yast on ubuntu?
[14:21] <jhutchins> Felishia: kubuntu is the same java packages as ubnutu.
[14:21] <ActionParsnip> Felishia: how will a new desktop sort your issue?
[14:22] <jhutchins> Felishia: kubuntu is just ubuntu with the KDE desktop.
[14:22] <ActionParsnip> Felishia: ^
[14:22] <Felishia> but when I run with fluxbox everything goes well and the jvm works amazingly, but on kde it like explodes all the time, suddenly the process terminates
[14:22] <Felishia> specially when saving the file
[14:22] <ActionParsnip> Felishia: all you are doing is changing the ffront end to the same OS
[14:22] <Felishia> so I think it's a bug with KDE
[14:22] <ActionParsnip> Felishia: maybe its a bug with KDE
[14:22] <ActionParsnip> zing
[14:22] <Felishia> ActionParsnip, because it's only with new dialogs...
[14:23] <Felishia> it says something about ulimit -e ulimited
[14:23] <jhutchins> Felishia: That's possible, simply install unity or gnome, or even xfce, and see if you have the problem when you use those desktops.
[14:23] <jhutchins> Felishia: The underlying code is the same.
[14:23] <Felishia> jhutchins, I don't have the problem with fluxbox
[14:23] <GraemeLion> Felishia: Then there is something else going on.
[14:23] <Felishia> however on KDE the jvm works if I run it as root
[14:23] <jhutchins> Felishia: Then it sounds like you have solved your problem.
[14:23] <jhutchins> !next
[14:23] <GraemeLion> I would highly not recommend running anything as root that does not need to be run as root.
[14:24] <Felishia> GraemeLion, the jvm doesn't work properly on KDE if I don't run it as root
[14:24] <slikts> GraemeLion: but then you have to waste time entering the password
[14:25] <seanbright> i have a dell r420 with an equallogic HBA installed and i would like to install 12.04 directly to an iscsi volume and use that as a root partition.  is that possible or am i wasting my time?
[14:25] <slikts> GraemeLion: running everything as admin worked for windows xp, so why is ubuntu so insecure that you need to bother about it?
[14:25] <GraemeLion> slikts: ...
[14:26] <slikts> that's what an antivirus is for anyway
[14:26] <GraemeLion> Felishia: as I said, then something else is going on here.
[14:26] <GraemeLion> slikts: It's way too early for sarcasm for me :D
[14:26] <Felishia> GraemeLion, I believe it's a bug in KDE
[14:27] <Felishia> Gonna get back to Ubuntu, I've found too many bugs in KDE
[14:27] <Felishia> even when it looks amazing
[14:38] <anonx___> what is the simplest way to remotely access ubuntu 12.04 over the internet via a linux client?
[14:39] <bekks> anonx___: ssh
[14:39] <bigred15> ssh
[14:39] <anonx___> sorry...i meant with remotely accessing / controlling a live X session...e.g. helping a friend remotely
[14:40] <bigred15> Has anyone successfully managed to get 12.04 (64bit) and IBM Lotus Notes 8.5.3 to work? I've just about ripped the last remaining hair out. :(
[14:40] <bekks> bigred15: Yeah, I did it years ago. :)
[14:40] <bigred15> bekks: heh, I want to cry at this stage. You wouldn't happen to have a documented procedure that works, would you? :)
[14:41] <Touhou11> Why would you use Lotus Notes? :S
[14:41] <bigred15> Work, completely out of my control, Touhou11.
[14:41] <bekks> Touhou11: Company policy.
[14:41] <bekks> bigred15: So which error do you get?
[14:42] <bigred15> Which error? Hah, I can't even download the 32bit dependancies through getlibs
[14:42] <bekks> bigred15: getlibs?
[14:43] <bigred15> Yeah. I'm following a procedure from the Internet (well, mixing and matching) and all of them utilise getlibs.
[14:43] <bekks> bigred15: I never used that.
[14:44] <bigred15> error while loading shared libraries: libgnomevfs-2.so.0: cannot open shared object file: No such file or directory
[14:44] <Rory> anonx___: VNC
[14:44] <bigred15> That's the first error I get when trying to open notes.
[14:45] <anonx___> Rory, for both client and server side? is the connection encrypted?
[14:45] <Rory> !vnc | anonx___
[14:45] <anonx___> ok thanks
[14:45] <Rory> anonx___: It's not encry[pted, you tunnel it through ssh, which is
[14:46] <anonx___> ok
[14:48] <ActionParsnip> anonx___: teamviewer can also work
[14:50] <Touhou11> Proprietary software though
[14:51] <anonx___> ActionParsnip, thanks
[14:51] <davalec> Not counting Gnome3 leak
[14:54] <wheatthin> I love the way my system is now.. if I upgrade to 14.04 when it comes out (soon) will all my settings and gnome3 shell still be installed?
[14:55] <CaptnBlackbeard> i have now tried pendrive installer and after booting usb it still says "missing operating system"
[14:55] <wheatthin> CaptnBlackbeard, make sure your usb partition is marked bootable.
[14:55] <jhutchins> wheatthin: No, they will be transported to Ceres, where inconceivable aliens will sort through them for evidence of weakness in our species.
[14:56] <wheatthin> jhutchins, YES~! I knew it lolo
[14:56] <Touhou11> wheatthin: In theory, yes. The Ubuntu upgrade experience can be flawed in my experience unfortunately
[14:58] <mistawright> I have a ubuntu server on aws currently running apache and passenger. with it passenger deploying the rails app through a apache module. If i grow my instance do I need to modify anything with the apache configs etc?
[15:01] <jhutchins> wheatthin: The upgrade from release candidate to actual release usually only involves a few minor files like the LSB release settings and such, so it's usually pretty minor.
[15:07] <angelazou> how do I un-update something that is set with 'update-rc.d my-application defaults'
[15:07] <CaptnBlackbeard> wheatthin isnt' the pendrive tool supposed to do that? or do i need to do it manualy in cmd?
[15:08] <angelazou> I originally have a upstart script for a Node.js process
[15:08] <angelazou> now I want to remove it
[15:08] <angelazou> but since I originally set it to run when system starts, how do I un-run it?
[15:09] <angelazou> anyone?
[15:09] <Guest7032> we all know windows's kernel didn't released ,but how did people find the bug
[15:12] <shubhamjain> My  ruby executables ( bundle, bundler, rake ) lay in  a rvm directory. I added the path to directory in my ~/.profile, but still when I type bundle, what pops is that the package can be found in "bundler, ruby-bundler".
[15:13] <MDTech-us_MAN_> hello
[15:13] <bigred15> bekks: I've some how managed to get the notes to open, it's performing a synchronisation at the moment. :)
[15:13] <bekks> bigred15: :D
[15:14] <MDTech-us_MAN_> I installed Ubuntu on my server. now I can't get to a usable display because I get input out of range on my monitor
[15:14] <MDTech-us_MAN_> what do I do?
[15:14] <bigred15> bekks: Heh yeah, that's currently what my face looks like. Although, I'm not the most optimistic man going around, I suspect this'll break somewhere. Sadly after I get this working, I then need to tackle TSM Client 7.1 on this :|
[15:16] <dusf123> is there any chance ubuntu will just install properly without messing with fast boot and secure boot where Windows 8.1 uefi gpt is already installed on the drive?
[15:17] <MDTech-us_MAN_> so, any Ideas?
[15:18] <anonx___> how do you prevent having to enter user password every time the screensaver turns on?
[15:18] <k1l> anonx___: uncheck that in the system settings?
[15:18] <jamar> hi does anyone know if there is a dtmf decoder
[15:18] <jester-> !uefi | dusf123
[15:19] <MDTech-us_MAN_> when I turn on my ubuntu, my monitor just goes black and says Input Out Of Range.
[15:19] <anonx___> k1l, thanks
[15:19] <MDTech-us_MAN_> WHAT DO I DO!?
[15:19] <MDTech-us_MAN_> ;(
[15:20] <MDTech-us_MAN_> I just installed it 2 minutes ago
[15:20] <Pici> jamar: the multimon package description looks like it might be able to do that... but I really have no idea what I'm looking at. (also you may want to check out #ubuntu-hams and ##hamradio, although again, I know next to nothing about such things myself)
[15:20] <bregma> MDTech-us_MAN_, sounds like you may need to boot into 'safe mode'
[15:20] <jamar> thanks Pici
[15:20] <MDTech-us_MAN_> I know
[15:21] <MDTech-us_MAN_> I tried failsafex
[15:21] <jester-> MDTech-us_MAN_: server has no X
[15:21] <MDTech-us_MAN_> still same problem
[15:21] <MDTech-us_MAN_> I installed the desktop version
[15:21] <hillary> how do i remove write protection in my flash disk then format it.
[15:21] <hillary> am using ubuntu 12.04
[15:22] <MDTech-us_MAN_> I used the NetInstall installer
[15:22] <hillary> i mean disabling write protection
[15:22] <MDTech-us_MAN_> and specifically selected "Ubuntu desktop" when it asked what to install
[15:23] <dusf123> jester: i have already read that, and it is not clear on whether changes need to be made or not
[15:23] <dusf123> other guides seem to suggest it might work without changes
[15:23] <ActionParsnip> hillary: does the device have a switch to enable write protection in a physical switch
[15:24] <MDTech-us_MAN_> bregma: jester-: I can boot into recovery and drop to the root command line
[15:26] <jester-> MDTech-us_MAN_: are you sure of to have a DE or Wm installed?
[15:26] <MDTech-us_MAN_> jester-: whats DE of Wm?
[15:26] <MDTech-us_MAN_> or Wm
[15:27] <jester-> than unity xfce or openbox
[15:27] <MDTech-us_MAN_> well, I just installed with default options
[15:28] <jester-> server has no x
[15:28] <MDTech-us_MAN_> I didn't install server
[15:28] <jester-> MDTech-us_MAN_: try to install openbox
[15:28] <MDTech-us_MAN_> how?
[15:28] <jester-> light wm (windows manager)
[15:28] <MDTech-us_MAN_> I cant login
[15:29] <MDTech-us_MAN_> as soon as I start ubuntu, I get the Out Of Range error in my monitor
[15:31] <RealKillaz> Hi gents..
[15:31] <RealKillaz> I'm having problem booting a new server installation 10.04.4 LTS on an IBM server
[15:32] <john_rambo> I cant boot with the latest kernel after update http://paste.ubuntu.com/7249801/
[15:32] <wheatthin> MDTech-us_MAN_, sounds like it's not recognizing DKMS with your installed driver (quick hunch) .. check dmesg for further detail
[15:32] <Rory> john_rambo: Can you boot with another kernel?
[15:32] <john_rambo> Rory, Yes
[15:32] <Rory> john_rambo: My recommendation is to boot from a LiveCD (or USB) and run the "boot repair" tool. This tool fixes 90% of the grub related issues we see in this channel. https://help.ubuntu.com/community/Boot-Repair
[15:32] <RealKillaz> I see that all the booting options are failing: ubuntu and Hard disk..
[15:32] <MDTech-us_MAN_> wheatthin: what do you mean "check dmesg for further detail" ?
[15:32] <dusf123> is there any chance ubuntu will just install properly without messing with fast boot and secure boot where Windows 8.1 uefi gpt is already installed on the drive? please do not refer me to !efi !uefi
[15:33] <wheatthin> MDTech-us_MAN_, go into your console and type dmesg and look for errors
[15:33] <RealKillaz> I've read that these servers has a special booting thing.. I've forgot the name...
[15:33] <wheatthin> have access via ssh?
[15:33] <MDTech-us_MAN_> ok. going to recovery
[15:33] <RealKillaz> which is shwoing as "ubuntu"... during booting
[15:33] <MDTech-us_MAN_> oh! great idea!
[15:33] <MDTech-us_MAN_> I remember enabling SSH during install
[15:36] <MDTech-us_MAN_> wheatthin: ha! try to guess the ip address!
[15:36] <MDTech-us_MAN_> such a PITA
[15:36] <bekks> MDTech-us_MAN_: Why dont you just look it up?
[15:37] <MDTech-us_MAN_> how?
[15:37] <pieces029_> Hello all.  Has anyone had luck with a Thinkpad X1 Carbon v2 with getting the LCD function keys doing anything other than being function keys? IE Able to adjust brightness, sound and that sort of thing.
[15:37] <ActionParsnip> MDTech-us_MAN_: Wget-qO-icanhazip.com
[15:37] <RealKillaz> Yes, we're trying to load the ubuntu via UEFI, but this is failing..
[15:37] <dusf123> have any of you managed to install linux alongside windows 8.1 uefi gpt without messing with options like secureboot and fastboot?
[15:37] <RealKillaz> it is the ubuntu server
[15:38] <bekks> MDTech-us_MAN_: "guest" implies that you are using a virtual machine, right?
[15:38] <MDTech-us_MAN_> no i dont use a vm
[15:38] <dusf123> RealKillaz: did you disable secureboot and fastboot?
[15:39] <bekks> MDTech-us_MAN_: Then which "guest" do you talk about?
[15:39] <MDTech-us_MAN_> ok
[15:40] <RealKillaz> dusf123, nope...
[15:40] <aaa> hola
[15:40] <MDTech-us_MAN_> what guest?
[15:40] <RealKillaz> dusf123, this is an IBM server. So we should disable this BIOS feature
[15:40] <bekks> MDTech-us_MAN_: "wheatthin: ha! try to guess the ip address!" - thats what I refer to.
[15:40] <dusf123> RealKillaz: i have installed ubuntu many times before but not on uefi, many here have been redirecting me to:
[15:40] <dusf123> !uefi
[15:41] <bekks> RealKillaz: IBM has plenty of documentation on how to a) install them using UEFI, b) how to install linux on them, c) how to configure the hardware for a) and b)
[15:42] <MDTech-us_MAN_> bekks: I ment the IP address to connect via SSH to
[15:42] <dusf123> bekks: can you please answer my question from earlier this afternoon?
[15:43] <bekks> MDTech-us_MAN_: IP address of what?
[15:43] <bekks> dusf123: Please restate the question then.
[15:43] <MDTech-us_MAN_> wheatthin: bekks: jester-: I finally got connected to the problematic computer via ssh
[15:43] <MDTech-us_MAN_> bekks: of the problematic computer
[15:45] <dusf123> bekks: i have read the !uefi documentation, but even at that i am not clear on whether it is possible ubuntu and windows 8.1 uefi gpt will just work *without* disabling fast boot and secureboot, or anything else in windows? have you any experience? i can disable those features if i must, but if i can dual boot without doing so i would prefer to
[15:46] <bekks> dusf123: If you leave fastboot enabled, it isnt possible to boot anything else than Windows.
[15:46] <bekks> dusf123: secureboot is supported by Ubuntu.
[15:48] <dusf123> bekks: damn, i spent a lot of time getting windows to boot quicker using intel rapid start (and storage technology) and expresscache running on the 22GB SD
[15:48] <dusf123> windows is on a hdd
[15:49] <MDTech-us_MAN_> ok, how can I change the resoloution over ssh?
[15:50] <bolD> hey guys, why it happens: if I test my drives with dd - it shows about 600Mb/s in the first time (real speed) and then the speed is decreasing up to 60Mb/s? as soon as I remove this file and perform tests again - it shows 600Mb/s.. And much lower speed if file exists..
[15:50] <MDTech-us_MAN_> running "xrandr -s 1024x768" returns "Can't open display"
[15:50] <bekks> MDTech-us_MAN_: Then you have to export the variable DISPLAY pointing to the display to be changed first.
[15:50] <MDTech-us_MAN_> how?
[15:51] <bekks> MDTech-us_MAN_: http://askubuntu.com/questions/77298/export-display-cant-open-display
[15:51] <dusf123> bekks: i'm reading turning off fast boot is optional
[15:51] <dusf123> this is why i am confused
[15:51] <bekks> dusf123: Using fastboot, you will get no boot menu.
[15:52] <MDTech-us_MAN_> bekks: how do I know what display to export?
[15:52] <bekks> MDTech-us_MAN_: Just read the example given in the link.
[15:53] <TazaChoncha> Hello there.
[16:00] <MDTech-us_MAN_> how do I print all of the diplay info via ssh (resoloution, hertz, etc)
[16:00] <MDTech-us_MAN_> so I can know what is wrong
[16:02] <MDTech-us_MAN_> bekks: ^
[16:03] <bekks> MDTech-us_MAN_: there is no such command.
[16:03] <Rory> MDTech-us_MAN_: Closest would be xrandr
[16:03] <MDTech-us_MAN_> bekks: I managed to set the resoloution to something ok
[16:04] <bekks> MDTech-us_MAN_: Good.
[16:04] <MDTech-us_MAN_> now it says running in low graphics mode
[16:04] <MDTech-us_MAN_> you need to configure settings yourself
[16:04] <MDTech-us_MAN_> with only an ok button
[16:04] <MDTech-us_MAN_> pressed ok
[16:05] <bekks> MDTech-us_MAN_: Which graphics chipset do you have?
[16:05] <MDTech-us_MAN_> who knows. i have a HP Prolianf DL380
[16:06] <MDTech-us_MAN_> Proliant
[16:06] <bekks> MDTech-us_MAN_: Then why on earth do you need graphical output on a server? :)
[16:06] <MDTech-us_MAN_> i need tk set it up dont you think!?
[16:06] <MDTech-us_MAN_> *to
[16:07] <bekks> MDTech-us_MAN_: No, why? No a single one of the hundreds of servers I've installed in my life even had a display at all? Why do you need a display at that server?
[16:08] <MDTech-us_MAN_> dont you use an image to set up all those servers?one single image that gets installed to every server.
[16:08] <bekks> MDTech-us_MAN_: Yes. And why do YOU need a display on a server?
[16:09] <MDTech-us_MAN_> it is the first server
[16:09] <MDTech-us_MAN_> i dont have an image to install from
[16:09] <bekks> MDTech-us_MAN_: And why do YOU need a display on that server then?
[16:10] <bekks> MDTech-us_MAN_: You dont need a display at all. You can use the ILO for installing and setting a known IP address. No furter display is needed at all.
[16:10] <MDTech-us_MAN_> i have to manually install ubuntu. manually install vmware on it later on
[16:10] <Delta_5> MDTech-us_MAN_,  why can't you set up the server from the command line or SSH?
[16:10] <adri_genewa> hennie: hi.. dari indonesia bukan?
[16:10] <bekks> MDTech-us_MAN_: thats still no need for a display.
[16:11] <bekks> MDTech-us_MAN_: Did you ever heard of HP ILO?
[16:11] <k1l> !id | adri_genewa
[16:11] <MDTech-us_MAN_> bekks: nope never heard ok it
[16:11] <MDTech-us_MAN_> never heard of it
[16:11] <bekks> MDTech-us_MAN_: Then you should ask someone who had installed more HP Proliant servers than you did. :)
[16:12] <bekks> MDTech-us_MAN_: http://h17007.www1.hp.com/us/en/enterprise/servers/management/ilo/index.aspx
[16:13] <MDTech-us_MAN_> and obviously iLO is not free
[16:14] <bekks> MDTech-us_MAN_: Yes. And a DL380 is an enterprise product.
[16:14] <Earthnail> I have a weird problem regarding alias on Ubuntu 13.10. This problem only exists on the official Ubuntu AWS image, not on a regular Ubuntu image. I still hope you guys can point me in the right direction. This is the output of echo $PATH:
[16:14] <MDTech-us_MAN_> well, it only cost $200 where I found it
[16:14] <ammu> I'm using ubuntu 12.04 and has a wired connection. I wanted to connect an android device to this . I tried installing ap-hotspot since adhoc networks are not detected in some android and windows versions. The device gets connected and I do not get access to internet. Can anyone help me to fix this ?
[16:14] <Earthnail>   /home/ubuntu/.virtualenvs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games
[16:14] <Earthnail> (sorry for the duplicate paths, actually the paths are not duplicate in reality)
[16:15] <fuzzyghost> Heya all
[16:15] <hakermania> Anyone knows the difference between the current nigthly build and the final release ? Providing that everything has frozen, wouldn't these 2 be the same?
[16:15] <fuzzyghost> I'm having trouble with ubuntu 12.04.
[16:15] <somsip> !final | hakermania
[16:15] <fuzzyghost> I get a log in screen like normal, and I type in my password.
[16:15] <Pici> hakermania: more testing is required for the final build and things might change as a result of that testing.
[16:16] <TechDent_> anyone here #LXC expert please ?
[16:16] <fuzzyghost> However, upon typing it in, it gives the prompt again, and this time, it just hangs with "Logging in..." below my name.
[16:16] <ammu> I'm using ubuntu 12.04 and has a wired internet connection. I wanted to connect an android device to this . I tried installing ap-hotspot since adhoc networks are not detected in some android and windows versions. The device gets connected and I do not get access to internet. Can anyone help me to fix this ?
[16:16] <Earthnail> in  ~/.virtualenvs/, I have a script called activate_env.sh
[16:16] <bekks> MDTech-us_MAN_: you should investigate the documenation then, first. :)
[16:17] <MDTech-us_MAN_> WTF!?  $399.00!? you've gotta be kidding me!
[16:17] <Earthnail> naturally, running "source activate_env.sh" should run fine, because ~/.virtualenvs/ is on the path
[16:17] <fuzzyghost> Anyone familiar with this problem?
[16:17] <MDTech-us_MAN_> costs twice as much as the server itself
[16:17] <ilhami> fuzzyghost what problem?
[16:18] <bekks> MDTech-us_MAN_: A new DL380, a recent one, is about 3000$. So thats cheap.
[16:18] <MDTech-us_MAN_> well...
[16:18] <Earthnail> oh guys, nevermind. I figured it out -.-
[16:18] <MDTech-us_MAN_> I got mine for $200
[16:18] <RealKillaz> bekks, I was hoping to get some expert here with some experience of how to install UEFI bootloader.... we're trying to use the boot repaid..
[16:18] <bekks> MDTech-us_MAN_: But havent read a single bit of the server docs yet.
[16:18] <bekks> !uefi | RealKillaz
[16:20] <Slart> Ubuntu somehow decides that harddrives are either external(removable) or not removable.. those that are removable can be displayed in "remove this external thingy" widgets and so on.. how can I tell ubuntu that my harddrives are internal and not removable?
[16:21] <MDTech-us_MAN_> might as well go work with the things I got. ssh. http://www.sherv.net/cm/emoticons/guns/suicide.gif
[16:22] <fuzzyghost> I'm not muted, am I?
[16:22] <astroduck> hey there! my ubuntu's status bar doesn't refresh when I exit from full screen, it shows what was on the status bar's area when some application was full screen. It only refreshes when I either change workspace/change window/click on any status bar's icon. Does anyone else faces this problem?
[16:22] <Slart> fuzzyghost: nope.. I can see/hear/read you
[16:23] <g0tcha> hi guys, is there a way to create a 1:1 backup of a running system?
[16:23] <nicolo7> ciao a tutti!
[16:23] <fuzzyghost> Okay, I'm just really hoping to find help, so that I hopefully don't have to reinstall Ubuntu.
[16:23] <nicolo7> list!
[16:24] <k1l> !list | nicolo7
[16:24] <fuzzyghost> Has anyone had a problem with Ubuntu prompting for login twice, then hanging on the second attempt?
[16:24] <Slart> g0tcha: there are a lot of things that are generated in memory that shows up as files and such... I'm not sure you can make a exact 1:1 copy but you can get very close by just replicating all the files
[16:24] <Slart> fuzzyghost: you get the same login screen twice? or the second one is different?
[16:25] <g0tcha> Slart, i can lose a weeks work at the most without an issue.. it doesnt have to b the most recent backup
[16:25] <g0tcha> Slart, can this be achieved?
[16:26] <Slart> g0tcha: if you have another computer with the same hardware you should be able to just copy all the regular files from the root file system.. you might run into some problems with UUIDs for hard drives but apart from that it should work, to the best of my knowledge
[16:26] <nicolo7> list!
[16:26] <MDTech-us_MAN_> what is a good FREE virtualization software that you can install on ubuntu and manage from another computer
[16:27] <k1l> !list > nicolo7
[16:27] <g0tcha> Slart, ok.. any idea of what could do this?
[16:27] <g0tcha> something reliable?
[16:27] <Slart> MDTech-us_MAN_: virtualbox isn't remote manageable?
[16:27] <MDTech-us_MAN_> is it?
[16:27] <Slart> g0tcha: the copying of files could be done by almost anything.. rsync is nice for doing big jobs
[16:27] <MDTech-us_MAN_> last time I looked I didn't see such an option
[16:28] <g0tcha> Slart, ill give that a shot dde, thanks
[16:28] <g0tcha> dude*
[16:28] <louigi> hey guys! bought a lenovo b590 because here it says it is certified for ubuntu: http://www.ubuntu.com/certification/hardware/201208-11524/
[16:28] <Slart> MDTech-us_MAN_: Never really tried so I can't say.. that would be my first suggestion for good free virtualization software.. the part about managing from another computer is the only catch
[16:28] <llutz> MDTech-us_MAN_: what's wrong with VBoxManage via ssh?
[16:28] <louigi> However, seems like "certified" means no wifi
[16:28] <Slart> g0tcha: good luck
[16:28] <louigi> at least, I don't know how to get wifi drivers there
[16:29] <louigi> has anyone battled this?
[16:29] <fuzzyghost> Okay, I was able to resolve it.
[16:29] <louigi> immediate googling reveals nothing useful
[16:29] <MDTech-us_MAN_> SSH is a PITA. I would prefer something with a GUI on the management side
[16:30] <fuzzyghost> I'll post the results in the thread I started in Ubuntu forums, but suffice to say, go to tty1, move your .Xauthority to another file (I named it to .Xauth-bk), and reboot.
[16:30] <JCM83> I'm having this idiotic problem again where I can't empty the trash from a flash drive
[16:30] <fuzzyghost> Login starts as normal.
[16:30] <sakang> seems like Ubuntu is slow in releasing fix for the BleedingHeart bug for openssl?  libssl1.0.0 is still at 1.0.1f while Debian has it fixed now at 1.0.1g
[16:30] <JCM83> it adds like a half hour of effort to using a damn flash drive which is unacceptable
[16:30] <Slart> JCM83: is the file system ok?
[16:31] <fuzzyghost> Thanks for at least acknowledging me though, and I wish everyone else good luck.
[16:31] <llutz> !sslbug | sakang
[16:31] <JCM83> slart I don't know.
[16:31] <JCM83> slart I am trying to delete some files from the trash folder on a flash drive.
[16:32] <JCM83> When I press "empty trash" it doesn't empty it. When I press "delete" on the file itself in the .trash folder on the flash drive, nothing happens. When I open nautilus as root and try to clear the trash from there, "operation not supported."
[16:32] <oraka> hello everyone, could you please remind me the name of the non-support channel for ubuntu? meaning general topics
[16:32] <Pici> oraka: #ubuntu-offtopic
[16:32] <Slart> JCM83: do you get any error messages? anything in /var/log/syslog or /var/log/kern.log ? anything in dmesg?
[16:32] <oraka> Pici, thank you! :)
[16:32] <sdegutis> Can I just do `dd if=/dev/sda1 of=/dev/sdb1` to create a portable version of my linux installation (assuming my linux is on /dev/sda1 and a USB is on /dev/sdb1)?
[16:32] <cybrNaut> i had to run hybridiso before copying the iso.  any idea why?  is there a reason they distribute a non-hybrid iso?
[16:33] <JCM83> slart in syslog?
[16:33] <JCM83> let me watch it
[16:33] <Slart> JCM83: never had that happen to me... is it a normal fs? NTFS? FAT?
[16:33] <cybrNaut> sdegutis: that may not be enough... why not copy the whole drive?
[16:33] <Slart> JCM83: have a look and see if you can get some more information out of it
[16:33] <JCM83> slart this?
[16:33] <JCM83> Apr 14 11:31:13 Frankenputer kernel: [  575.452749] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
[16:33] <sdegutis> cybrNaut: Oh, I can do that?
[16:34] <JCM83> and then the next two are
[16:34] <JCM83> Apr 14 11:32:16  whoopsie[1116]: last message repeated 4 times
[16:34] <JCM83> Apr 14 11:33:22  whoopsie[1116]: last message repeated 7 times
[16:34] <Slart> JCM83: that looks like a wifi chip.. I don't think that's it
[16:34] <cybrNaut> sdegutis: yeah, just remove the "1"
[16:34] <Slart> JCM83: and don't paste into the channel.. use a pastebin
[16:34] <Slart> !pastebin | JCM83
[16:34] <cybrNaut> sdegutis:  so => `dd if=/dev/sda of=/dev/sdb`
[16:34] <JCM83> okay slart, so this is showing up in auth.log
[16:35] <JCM83> Apr 14 11:33:26 Frankenputer sudo:     john : TTY=pts/14 ; PWD=/home/john ; USER=root ; COMMAND=/usr/bin/nautilus
[16:35] <sdegutis> cybrNaut: Although I only have one partition on /dev/sda and /dev/sdb
[16:35] <Slart> JCM83: this is an old thread..  but it might contain something http://ubuntuforums.org/archive/index.php/t-906507.html
[16:35] <cybrNaut> sdegutis: also make sure both devices are unmounted
[16:35] <sdegutis> cybrNaut: so that may be not necessary right?
[16:35] <cybrNaut> sdegutis: well your boot records won't get copied if you just copy the partition
[16:35] <sdegutis> cybrNaut: Oh wait, they have to be unmounted? I was hoping to do this while booted into /dev/sda1
[16:35] <Slart> JCM83: mm.. looks like something is using sudo.. perhaps for emptying trash.. nothing else?
[16:36] <cybrNaut> sdegutis: so if you just copy the partition, then you'll need to run grub or something to make it bootable
[16:36] <sdegutis> cybrNaut: Oh, I didn't know where the boot records are stored. Thanks.
[16:36] <cybrNaut> sdegutis: it's best to boot a live dvd/stick, and then use dd
[16:36] <JCM83> linux apparently can't handle its own filesystem
[16:36] <JCM83> got it
[16:36] <sdegutis> cybrNaut: Ah. Thanks.
[16:37] <cybrNaut> sdegutis: if you boot a live distro, then you can have all devices unmounted except the live one
[16:37] <sdegutis> cybrNaut: Ah so then I'd need 2 USBs.
[16:37] <sdegutis> cybrNaut: One for the live USB to boot, and one for the target USB.
[16:38] <cybrNaut> sdegutis: yes.  although there are other ways.. it's easier if you boot a live disk
[16:38] <john_rambo> I am getting this while installing 12.04 http://imagebin.org/305501
[16:39] <cybrNaut> sdegutis: you can of course have a live CD/dvd as well... or if you have another machine/laptop, you can connect the drives to that
[16:39] <bekks> john_rambo: And?
[16:39] <Yelu> MDTech-us_MAN_: With VirtualBox you can have a (headless) Ubuntu server which runs the VirtualBox extension pack. - So you are able to set up Ubuntu (Desktop VMs) via Console or even remotely via SSH. - If you switch on the RDP option of such aguest (Desktop Ubuntu) on the headless Ubuntu Server (as Host to the VM) you even can have a secured remote GUI session. - Just for the records ...
[16:39] <ljsoftnet> how do i remove notepad mime in root pcmanfm
[16:39] <bekks> john_rambo: Whats the actual issue at that point?
[16:39] <john_rambo> bekks: I cant get rid of that 1mb partition no matter what I do
[16:40] <bekks> john_rambo: Then leave it?
[16:40] <bekks> john_rambo: Whats wrong with it?
[16:40] <sdegutis> cybrNaut: have you done this before?
[16:40] <john_rambo> bekks: But what about that message ?
[16:40] <john_rambo> bekks: See the image
[16:41] <bekks> john_rambo: See the "continue" button? Click it.
[16:41] <bekks> john_rambo: Or go back and correct the error as the message tells you.
[16:41] <cybrNaut> sdegutis: yes.. it's how I backup before doing something risky
[16:41] <sdegutis> cybrNaut: heh
[16:42] <sdegutis> how risky can you get w/ubuntu
[16:42] <cybrNaut> sdegutis: i've been burnt by "aptitude dist upgrade".. it totally trashed my system once
[16:46] <ljsoftnet> how do i remove notepad mime in root pcmanfm
[16:47] <oraka> is 14.04. coming on 17.04.?
[16:48] <MDTech-us_MAN_> Yelu: llutz: Slart: bekks: Sorry guys, but I decided to dump Ubuntu entirely and use VMWare's free ESXi instead
[16:48] <bekks> MDTech-us_MAN_: Whatever.
[16:48] <llutz> MDTech-us_MAN_: who cares?
[16:48] <bekks> MDTech-us_MAN_: you will have the same issues.
[16:50] <k1l> oraka: yes, but dont expect it at 00:01 on 17th april
[16:51] <GraemeLion> And if servers are any kind of clogged like they were before, don't expect it to be easy to get on 4/17. :P
[16:51] <oraka> k1l, I will sleep in front of canonical.
[16:51] <Slart> MDTech-us_MAN_: hope it works out for you.. good luck
[16:56] <ItManMsk2> Hi. Ubuntu 12.04.4 amd64 - install shell - no /sbin/fdisk found :( partman exist. Where fdisk?
[16:56] <ItManMsk2> Need create two partition at md raid
[17:03] <Yelu> MDTech-us_MAN_: Have fun, coexistance and diversity is key ...
[17:04] <MDTech-us_MAN_> damn! now I know why this server was so cheap! the CPU doesnt support virtualization technology!
[17:04] <betabertus8899> hey guys
[17:05] <bekks> MDTech-us_MAN_: Congratulations.
[17:05] <betabertus8899> my thunderbird has double sent item everytime, please help how can i fix this?
[17:05] <bekks> MDTech-us_MAN_: Which CPU is it exactly?
[17:05] <MDTech-us_MAN_> I dont have the slightest idea
[17:05] <mistawright> I resized a server over the weekend from a micro to a small and it seems to not be performing as well as it was when it was a micro. I have rails app running on it that is deployed using passenger and apache. Are there any configs I should have touched during the resize?
[17:06] <Yelu> MDTech-us_MAN_: Surprise!
[17:06] <bekks> MDTech-us_MAN_: So you dont even know what you bought? Now that were easy $200 for the seller.
[17:06] <bekks> MDTech-us_MAN_: You have to find it out.
[17:08] <MDTech-us_MAN_> looks like I have this: http://ark.intel.com/products/36608/intel-xeon-processor-x5270-6m-cache-3_50-ghz-1333-mhz-fsb
[17:08] <bekks> MDTech-us_MAN_: "looks like" or "I a m sure"?
[17:08] <bekks> MDTech-us_MAN_: Which CPU do you have exactly?
[17:08] <MDTech-us_MAN_> says here: http://h18004.www1.hp.com/products/quickspecs/12477_div/12477_div.pdf
[17:08] <bekks> MDTech-us_MAN_: That CPU obviously supports virtualization.
[17:09] <Yelu> Intel® Virtualization Technology (VT-x) => YES ???
[17:09] <Yelu> bekks: exactly
[17:09] <bekks> MDTech-us_MAN_: And that datasheet doesnt name a single specific provessor, but a whole range. So which CPU do you have? Go into the BIOS and find out.
[17:10] <MDTech-us_MAN_> hmm
[17:10] <MDTech-us_MAN_> ok
[17:13] <Yelu> MDTech-us_MAN_: or just thiow a desktop on that baby, install VirtualBox on it, set up a ubuntu vm and look what it says under "VT", which will be  automatically set, if your CPU is able to do that. (I'm "selling" you VirtualBox ...)
[17:14] <Yelu> or in a shell lshw and lspci grep "vt" and the like ...
[17:14] <gustav_> Hey. What's the preferred way to watch a BluRay?
[17:14] <ActionParsnip> MDTech-us_MAN_: any particular rerason for a 64bit guest OS?
[17:14] <gustav_> It's from 2010...
[17:14] <bekks> Yelu: "cat /proc/cpuinfo" :)
[17:15] <lotuspsychje> gustav_: a bluray dvd on ubuntu?
[17:15] <Yelu> bekks: yes, so much better, thx
[17:15] <gustav_> lotuspsychje: BluRay BD.
[17:15] <ethe123> Hello,
[17:15] <ActionParsnip> gustav_: try vlc
[17:15] <gustav_> vlc says no.
[17:15] <MDTech-us_MAN_> bekks: now at least I know the following: it is a HP Proliant DL380 G4
[17:15] <lotuspsychje> gustav_: what does it say exactly?
[17:15] <gustav_> VLC says "This Blu-Ray Disc needs a library for BD+ decoding, and your system does not have it."
[17:16] <GraemeLion> I've yet to be able to get blu-ray to work :P
[17:16] <ActionParsnip> gustav_: what is the output of:   cat /etc/issue
[17:16] <bekks> MDTech-us_MAN_: Which can easily be seen on front of the server.
[17:16] <gustav_> ActionParsnip: Ubuntu 12.10 \n \l
[17:16] <bekks> MDTech-us_MAN_: Find out which CPU exactly you are using.
[17:16] <ActionParsnip> gustav_: http://www.webupd8.org/2012/08/how-to-get-encrypted-blu-rays-working.html
[17:17] <gustav_> ActionParsnip: Oh... doesn't work with BD+...
[17:17] <SemenDickman> games not work plz help
[17:17] <SemenDickman> i want to play gta 5 pls help
[17:17] <ethe123> Does anyone know how to regain access to ubuntu after reinstalling windows 7 in dual boot mode? Once i reinstalled windows, dualboot doesnt display ubuntu anymore
[17:17] <ActionParsnip> SemenDickman: have you checked the wine appdb?
[17:17] <SemenDickman> whats that im asian i dont know this technical stuffs
[17:17] <ActionParsnip> ethe123: omgubuntu has a guide called "sticking it to grub" check it out
[17:17] <SemenDickman> very confusing :(
[17:17] <ActionParsnip> SemenDickman: but you know how to search the web right?
[17:18] <SemenDickman> did that
[17:18] <SemenDickman> not work
[17:18] <MDTech-us_MAN_> I know now that I have something like this, but with two CPUs http://www.chicagocomputersupply.com/hpprdlg4se311.html
[17:18] <ActionParsnip> SemenDickman: search the web to find things out...you've done that befoire, ye|
[17:18] <SemenDickman> done that
[17:18] <SemenDickman> not work
[17:18] <ethe123> ActionParsnip can i get a url?
[17:18] <lotuspsychje> !appdb | SemenDickman
[17:18] <SemenDickman> plz help
[17:18] <MDTech-us_MAN_> Probuct number: 311144-001
[17:18] <SemenDickman> i need help how to play gta 5?
[17:18] <SemenDickman> in ubuntu
[17:18] <ActionParsnip> SemenDickman: https://www.google.co.uk/?gfe_rd=cr&ei=aBhMU9DWE47Y8gfX6YGYBw#q=wine+appdb&safe=active
[17:18] <SemenDickman> noooo
[17:18] <SemenDickman> i dont have gta 5
[17:18] <ljsoftnet> how do i remove notepad mime from pcmanfm while in root
[17:18] <SemenDickman> i wnat gta 5 first pls help
[17:19] <ActionParsnip> ethe123: https://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CC8QFjAA&url=http%3A%2F%2Fwww.omgubuntu.co.uk%2F2011%2F09%2Flive-usb-sticking-grub-2-video&ei=fhhMU8DCArCv7AaM_oC4Ag&usg=AFQjCNHhy-pn_8gTlVtfln1kqsG4Pci3Tw&sig2=P2yAGX8N6cafOQA3UE46_Q&bvm=bv.64542518,d.bGQ
[17:19] <ethe123> thanks :)
[17:19] <ActionParsnip> ethe123: google is great you know, try igt
[17:19] <lotuspsychje> SemenDickman: plz dont repeat your question so many times
[17:19] <SemenDickman> anybody help i wnt to play gta 5 in ubuntu
[17:19] <ActionParsnip> SemenDickman: use the link I gave, what is the TOP result?
[17:19] <SemenDickman> its laptop
[17:19] <solu> Can I upgrade from 12.04 to 13:10 using the installer cd?
[17:19] <MDTech-us_MAN_> bekks: see this: https://docs.google.com/file/d/0B8bFhxAvTa9QQ3I1RzN2OEM1aXpURDFTNjl3WXY5Q01lWkg0/edit?pli=1
[17:19] <GraemeLion> GTA5 isn't out yet :P
[17:19] <SemenDickman> its LIVE USB STICKING TO GRUB
[17:19] <GraemeLion> for PC
[17:19] <ethe123> ActionParsnip I came here after I tried it
[17:19] <SemenDickman> i want to play gta 5
[17:19] <kupo_> be careful messing with the grub
[17:20] <SemenDickman> i ddint mess with grub
[17:20] <kupo_> the fun reboot with NO os
[17:20] <SemenDickman> im very poor guy tho im an asian
[17:20] <SemenDickman> shan xin ching ming fong
[17:20] <lotuspsychje> SemenDickman: plz stop the nonsense
[17:20] <SemenDickman> sing fong mang?
[17:21] <bekks> MDTech-us_MAN_: That does not show the make and model of your CPU. Find it out.
[17:21] <ActionParsnip> SemenDickman: https://appdb.winehq.org/objectManager.php?sClass=category&iId=84&sAction=view&sTitle=Browse+Applications
[17:21] <SemenDickman> plzz help im very poor asian guy
[17:21] <SemenDickman> but me no have no gta 5 help
[17:21] <ActionParsnip> SemenDickman: find the game in that list. I got you that link as the internet is obviously too hard for you
[17:21] <lotuspsychje> Pici: tnx
[17:21] <Pici> np
[17:22] <ActionParsnip> ethe123: that guide will help you put grub on the MBR and you can boot both OSes
[17:22] <hackal> Hello, I am running wordpress on ubuntu 13.04. It is on digitalocean VPS. I bought domain and changed dns records so it redirects to my ubuntus IP (apache2). However upon visiting from browser with domain name it sends me to server but changes domain name to IP. How could I avoid that and only showing domain name in url?
[17:22] <lotuspsychje> !13.04 | hackal
[17:22] <ActionParsnip> hackal: 13.04 is no lon ger supported. It is EOL. There is no support nad no updates
[17:23] <ActionParsnip> hackal: I suggest a clean install of Trusty which is out real soon and is LTS
[17:23] <bekks> MDTech-us_MAN_: Honestly. 200$ for a DL380G4 which is 9 years old was a waste $200 overall. Every small current netbook performs better.
[17:23] <compdoc> you trust Trusty?
[17:23] <lotuspsychje> compdoc: a thar is always stable on the rocks
[17:23] <hackal> SRY my bad it is Wordpress on Ubuntu 13.10
[17:24] <ActionParsnip> compdoc: why not, makes sense with it being so close t release day
[17:25] <hackal> Hello, I am running wordpress on ubuntu 13.10. It is on digitalocean VPS. I bought domain and changed dns records so it redirects to my ubuntus IP (apache2). However upon visiting from browser with domain name it sends me to server but changes domain name to IP. How could I avoid that and only showing domain name in url?
[17:25] <ljsoftnet> how do i remove notepad mime from pcmanfm while in root
[17:26] <gmachine_24> greetings earthlings. how can I get the local network IP address of my wireless printer? it is almost completely set up .... and is asking for the 192.168.X.X number
[17:26] <ActionParsnip> gmachine_24: nmap your subnet
[17:28] <CatKiller> hackal: Sometimes when you run a VPS you share the same IP with many other "tenants". The VPS company then runs a http proxy at the frontend to redirect requests to the appropriate tenant. If that's not configured correctly that could affect these URLs
[17:28] <cr33p> sup
[17:29] <CatKiller> also, if apache is misconfigured this could happen
[17:29] <CatKiller> But technically if apache is configured with the defaults it doesn't rewrite the target urls
[17:30] <hackal> CatKiller: DigitalOcean has option to build VPS with installed latest wordpress so I think apache was reconfigured
[17:30] <CatKiller> hackal: So it sounds like they might be able to help
[17:30] <hackal> It is pre-configured ubuntu for wordpress
[17:30] <Randomguy9900> Hey guys.  Could anyone help a linux noob figure out how to get his audio drivers working.  I've taken a stab at alsa, and I can get the mixer working in terminal, but never get any sound out.
[17:31] <Randomguy9900> I'm using lubuntu, and I can give more specs about the laptop and soundcard when needed
[17:33] <ActionParsnip> Randomguy9900: wget -O alsa-info.sh http://www.alsa-project.org/alsa-info.sh && chmod +x ./alsa-info.sh && ./alsa-info.sh --upload
[17:33] <ActionParsnip> Randomguy9900: is a great start
[17:34] <ubuntuos> hi
[17:34] <ActionParsnip> !away > dean|away
[17:34] <Yelu> CatKiller: Maybe this: Wait a couple of hours until all DNS servers have been replicated the new DNS records.
[17:35] <Randomguy9900> @ ACTION PARSNIP: Uploading information to www.alsa-project.org ...  Done!  Your ALSA information is located at  Please inform the person helping you.
[17:35] <Randomguy9900> ....
[17:35] <ActionParsnip> Randomguy9900: is there not a URL made?
[17:35] <keevitaja> i have strange problem with youtube and chrome. when video is playing and i hit back, then video keeps playing... any way to fix this?
[17:35] <Randomguy9900> ActionParsnip: That's a copy paste from terminal.  No link after loactaed at
[17:36] <zzxc> Hey guys. I have a question. I had a script I want to run on startup for a machine that does a mount -bind. How would I get it to run on start up?
[17:36] <ActionParsnip> Randomguy9900: ok remove the '--upload' from the command and select to not upload, then pastebin the generated file
[17:36] <bekks> zzxc: Add a bind mount entry in your fstab.
[17:37] <zzxc> bekks: Yeah I was debating on that, but I have 12 mount points, which makes it much easier to mount. Also since this is on AWS. I don't exactly have an easy was to fix this go in wrong.
[17:38] <zzxc> easier to mount using a script*
[17:38] <bekks> zzxc: Then add 12 entries to your fstab.
[17:38] <bekks> zzxc: Add the entries, check wether they work fine using "mount -a", and you are done.
[17:39] <zzxc> Don't I have to unmount everything to use mount -a?
[17:39] <ActionParsnip> zzxc: mount -a doesnt unmount anything
[17:41] <zzxc> ActionParsnip: Right, but it reads through the fstab entry and mounts all of the points. Wouldn't that case an issue since all of the devices are already mounted?
[17:42] <bekks> zzxc: It mounts them if they arent mounted.
[17:45] <ActionParsnip> zzxc: yes but that is mounting them, not unmounting them as you said.
[17:46] <chowder> hey guys I've got a doozy of an issue that I've been troubleshooting. I tried to update to trusty from 13.10. I used update-manager -d but ended up rebooting without it finishing because I'm a special kind of absent minded.
[17:46] <zzxc> ActionParsnip: Right right, but my question was "Don't I have to unmount everything to use mount -a?"
[17:47] <chowder> here is a more detailed description of my issue: http://paste.ubuntu.com/7250828/
[17:47] <ActionParsnip> zzxc: if you use mount -a it will mount everything that isnt already mounted from /etc/fstab
[17:47] <dusf123> !uefi
[17:49] <chowder> more info here: http://paste.ubuntu.com/7250837/
[17:49] <Yelu> ActionParsnip: yes, except entries with "noauto" keyword
[17:49] <zzxc> ActionParsnip: Right so since everything is already mounted. How would that check the fstab table?
[17:49] <Yelu> !mount | zzxc
[17:50] <chowder> anyone that feels that they can help me is more than welcome to PM me. Also I'm not running uefi if anyone's wondering.
[17:51] <bekks> chowder: This support most likely works like "you ask a question in here" and "people will answer your question", and not "support is done in pm". :)
[17:51] <zzxc> Yelu: Right. No I know what mounting is. I'm trying to do a mount -bind on startup.
[17:52] <Yelu> zzxc: I see.
[17:52] <chowder> bekks, I'm well aware of that, thank you very much, it was merely an open invitation.
[17:52] <chowder> bekks: did you see the pastes that I put up by any chance?
[17:53] <bekks> chowder: Yes, but I have no clue. Until now, no one managed to make me use encryption :)
[17:55] <dupingping> Hi
[17:56] <chowder> bekks: ah ok. I use it in case my machine gets stolen. I have a lot of important information. Basically I'm booting but its not decrypting my main data partition.
[17:56] <dupingping> Can you help me?
[17:56] <dupingping> Ah, my mistake.
[17:56] <bekks> dupingping: Not without asking a support question. You do know that.
[17:56] <dupingping> sorry.
[17:56] <Randomguy9900_> Action Parsnip: My computer died on me suddenly, though now I have power. What should I enter in the command line again?  And what ouput/file should I copy paste here?
[17:56] <bekks> chowder: I never used encryption, sorry.
[17:58] <Randomguy9900_> Nevermind. He's gone.  Could someone please help a linux beginner get his sound working on his laptop loading with Lubuntu?  I've tried messing around with alsa stuff, and can get the alsamixer in terminal, but never get sound out. Thanks
[17:58] <Randomguy9900_> *loaded with
[17:59] <chowder> Randomguy9900_: Do you know how to use the command line at all?
[17:59] <Randomguy9900_> I know "how" to use it. But not very well
[18:02] <chowder> Randomguy9900_, I need you to type this without quotes: "sudo lspci" it'll ask for your password but nothing will appear. Rest assured that your password is being typed. Hit enter. This will display things like networks cards and sound cards. You'll want to paste the output at paste.ubuntu.com. Then paste the link to that here.
[18:04] <gmachine_24> ok.... so... got the Brother DCP-J140W printer/scanner set up so the (wireless network) printer works fine in Ubuntu saucy; also d/led the scanner drivers from Brother - they seemed to install OK - sane-utils are installed; the scanner is SUPPOSED to work by just pressing the "Scan" key - but it does not . . . so I'm wondering if there is alternate access to the scanner from my Ubuntu desktop
[18:04] <chowder> Randomguy9900_, the output should have quite a few things. The relevant line(s) will say "Audio Device:" at the beginning
[18:04] <Randomguy9900_> chowder: I have used lspci before.  Though thank you very much for the walkthrough
[18:04] <Randomguy9900_> 00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
[18:05] <chowder> Randomguy9900_, oh ok. I didn't realize that you were experienced. I'm fairly certain that particular sound card works out of the box. What version of Ubuntu are you running?
[18:05] <server_> && ./install.sh
[18:06] <gmachine_24> I tried "simple scan" but it says no scanner is found
[18:06] <Randomguy9900_> I'm not experienced hah. Just happened to use that before. I'm using the latest version of lubuntu.
[18:06] <Randomguy9900_> I've tried both the headphone jack and regular speakers, and have messed with different levels in the mixer
[18:07] <Randomguy9900_> Although I have been testing it using youtube on the included firefox. If there may be an issue in between that and drivers, are there test files somewhere possibly?  Or should I download a sound file?
[18:09] <chowder> Randomguy9900_, you could download a sound file. Is pulseaudio running?
[18:10] <Randomguy9900_> chowder: I'll go download some file to use.  I'm not familiar with pulseaudio
[18:10] <hje841> I have a disk with full disk encryption that I want to access files on. It is from another laptop that is faulty so I want to recover the files. I manage to mount it using this https://help.ubuntu.com/community/EncryptedPrivateDirectory#Live_CD_method_of_opening_a_encrypted_home_directory I have it in a dock connected through USB. but now all the files in that folder I found is called 'ECRYPTFS....' How do I get at the files?
[18:10] <chowder> Randomguy9900_, I don't know that much about really deep system internals. I'm just a techie. However, as far as I know, all that stuff is taken care of by pulseaudio
[18:10] <Yelu> zzxc: How about this?
[18:10] <Yelu> Anything added to rc.local will run as root at startup, so there is no need to indicate ’sudo’.
[18:10] <Yelu> Add something like this to /etc/rc.local (before the “exit 0? line of course):
[18:10] <chowder> Randomguy9900_, try this sans-quotes: "ps aux | grep pulse"
[18:10] <Yelu> ___
[18:10] <Yelu> mount --bind <mount-source-1> <mount-targe-1t>
[18:10] <Baako> am doing setting up my workspace. i added a new vhost. i enabled by running "sudo a2ensite dev.john" this got enable i then restart apache "sudo service apache2 restart" when on my broswer. type in the url. "dev.carsale.local/" i got a blank page NOT error or anything any idea?
[18:10] <Yelu> mount --bind <mount-source-2> <mount-target-2>
[18:10] <unopaste> Yelu you have been muted for 60 seconds as it looks like you are pasting lots of lines into the channel, please use http://paste.ubuntu.com and paste just the URL of your data here when you are unmuted
[18:11] <chowder> Randomguy9900_, replace the word pulse with things like pulseaudio if you don't get anything
[18:11] <daftykins> Baako: welcome back. is there a test file in that path?
[18:12] <Randomguy9900_> (username)      1879  0.0  0.1   5668   796 pts/0    S+   14:11   0:00 grep --color=auto pulse         Is what I get out, (username) being my username
[18:12] <Baako> daftykins thanks. yes i do and the documentroot is side to where the index.php is
[18:12] <daftykins> Baako: 'side' ?
[18:13] <Baako> daftykins set TYPO
[18:13] <daftykins> Baako: have you already confirmed PHP operation is working?
[18:13] <serg_> hi all. i have a problem with Pulse audio and skype. Can you help me?
[18:13] <daftykins> !ask
[18:14] <Randomguy9900_> chowder: Using a test file, and messing with alsamixer levels I still get no sound through speakers or headphones
[18:14] <chowder> Randomguy9900_, try ps aux | less and look for a process that looks like pulseaudio. Make sure that your terminal window is maximized
[18:14] <bradsguitar> what should i enter as the device URI on an epson xp-310 i have installed
[18:14] <chowder> it might say something like pulsed
[18:15] <daftykins> bradsguitar: whatever the guide to set it up says to
[18:15] <bradsguitar> i dont have a guide
[18:16] <bekks> bradsguitar: then you should download it from the epson website.
[18:16] <Randomguy9900_> chowder: It is not in there (I do have to go in a minute so please post any last minute ideas before I leave if you can)
[18:17] <chowder> Randomguy9900_, pulseaudio does the bulk of the sound work. Messing with alsa might not be it. My suggestion would be to research pulseaudio. It might be something simple like a kernel module thats not loaded too. Google your sound card and search for the appropriate kernel module
[18:17] <r3s> Randomguy9900_,  have you tried alsa force-reload ?
[18:17] <chowder> use lsmod to list the kernel modules
[18:17] <chowder> rmmod will remove a module
[18:17] <chowder> insmod (I think) will insert a module
[18:18] <chowder> Randomguy9900_, your card is VERY common. I'm sure that this issue is out there in google. Don't give up!
[18:18] <chowder> Randomguy9900_, google your sound card and write something like "no sound" "ac97"
[18:18] <Baako> daftykins i have try adding some blank html but still dont show
[18:19] <gmachine_24> ok.... so... got the Brother DCP-J140W printer/scanner set up so the (wireless network) printer works fine in Ubuntu saucy; also d/led the scanner drivers from Brother - they seemed to install OK - sane-utils are installed; the scanner is SUPPOSED to work by just pressing the "Scan" key - but it does not . . . so I'm wondering if there is alternate access to the scanner from my Ubuntu desktop
[18:19] <gmachine_24> I tried "simple scan" but it says no scanner is found
[18:19] <Baako> daftykins php is working
[18:20] <Randomguy9900_> r3s_, that didn't fix the problem, but thank you
[18:20] <Baako> daftykins i typed in phpinfo() and got the php version so php is enabled
[18:20] <daftykins> Baako: i think it's fair to say given what i saw you do over the weekend that you're - some kind of web dev that's used to working with windows?
[18:20] <Randomguy9900_> chowder_, I'll see what I can do with it later, Thanks so much
[18:20] <chowder> Randomguy9900_, any time
[18:20] <r3s> Randomguy9900_, just checking. I had similar problem where I had to force-reload on every boot
[18:20] <Baako> daftykins i created a new one so its not the same one
[18:21] <daftykins> gmachine_24: try xsane
[18:23] <blastermaster> hi all
[18:25] <daftykins> Baako: anyway my point is that you're using the channel for 'how do i learn to administrate apache' and it's kinda wearing thin now :) you need to learn a bit more by yourself. as my last input though, you're going to want to double check all is well by restarting apache, then look into the access logs for whether your browser connection is successfully being permitted to read whatever index is in your newly defined site. also, file pe
[18:25] <Baako> daftykins :p i did check before asking anyways sorry for boring you
[18:25] <blastermaster> im trying to install ubuntu13.10 from a usb stick,but i just get a black screen , i have a new gtx 750ti nvidia anyone  have this problem?
[18:25] <esperegu> anybody knows how in bash I can pass an environment variables to a command when those variables are in a variable?
[18:26] <esperegu> so I have ENV="VAR1='1' VAR2='2'"..... I tried just putting $ENV before the command but that does not seem to work that way.
[18:27] <Sietsem> blastermaster, maybe try a different video output? Not sure what the issue is though
[18:27] <server_> global
[18:27] <Baako>  i fixed it ;)
[18:27] <daftykins> Baako: it's not that, it's just that learning how to administrate a web server is beyond the scope of Ubuntu support ;)
[18:27] <daftykins> Baako: ah do tell?
[18:29] <blastermaster> anyone?
[18:29] <bekks> !nomodeset | blastermaster
[18:30] <Guest88173> hey
[18:30] <blastermaster> ok
[18:30] <Guest88173> did my IP show when i entered this channel
[18:30] <daftykins> Baako: what was it?
[18:31] <bekks> Guest88173: Sure.
[18:31] <Guest88173> what was it
[18:31] <Guest88173> bekks: ??
[18:31] <daftykins> Guest88173: 69.244.43.156
[18:31] <Guest83828> I've followed this tutorial http://handytutorial.com/how-to-charge-ipad-iphone-ipod-in-ubuntu-13-04-12-10/
[18:32] <Guest88173> i have to register at a nickserv to hide my IP?
[18:32] <Guest83828> To be able to charge my iPhone 4 trough the USP-por
[18:32] <daftykins> Guest88173: further questions in #freenode please, this is ubuntu support *NOT* freenode support
[18:32] <Guest83828> as if right now my iPhone does not charge
[18:33] <Guest83828> When I type ipad_charge into terminal I get no device detected or an error occured
[18:33] <Guest88173> how many people are AFK in this channel?
[18:34] <troulouliou_dev> hi does anybody know how to specify a custom port for a forwarder in bind9 ?
[18:34] <daftykins> Guest88173: again that is not appropriate talk for this channel, if you have an Ubuntu related question you can ask, but otherwise please take it elsewhere
[18:34] <scrubfest> I am Guest83828 as of now
[18:34] <Guest88173> smartphones can use ubuntu if you "root" one?
[18:34] <yorwos> any1 have used dispalGUI to calibrate their monitors ? im having the problem after files are created it wont install them on the system [ub.studio 13.10] how can i install the icc ? [the msg i get is "Failed to import file. The profile was not added in time."
[18:34] <bekks> Guest88173: #ubuntu-touch :)
[18:35] <scrubfest> bekks is that apple product support related for ubuntu?
[18:35] <bekks> scrubfest: No.
[18:35] <scrubfest> :(
[18:37] <scrubfest> Quick generic irc-chat question: If noone answers my question I should assume noone has an answer, correct?
[18:38] <daftykins> scrubfest: yes, or nobody *active* knows
[18:39] <bekks> scrubfest: So which question did you have?
[18:40] <scrubfest> bekk ipad_charge: no such device or an error occured
[18:40] <scrubfest> followed this tutorial: http://handytutorial.com/how-to-charge-ipad-iphone-ipod-in-ubuntu-13-04-12-10/
[18:40] <scrubfest> I have rebooted
[18:40] <daftykins> scrubfest: which ubuntu are you on?
[18:41] <bekks> scrubfest: Plug in the cable, done. They will charge, but you might not be able to access them.
[18:41] <scrubfest> I have the cable plugged in, as far as I can tell it is not charging.
[18:42] <bekks> scrubfest: which may happen if the usb port is inapproriate for charging.
[18:43] <BradPJ> Hey quick question regarding kernels. Ubuntu stores all old kernels in /boot and doesn't remove them when new kernels are released right? When removing these kernels, removing everything using the version number of the kernel is the way to do it? Including abi-* config-* etc?
[18:43] <scrubfest> What do you mean bekk?
[18:43] <scrubfest> Does the tutorial only enable one of the many ports?
[18:43] <bekks> BradPJ: No.
[18:44] <mferranti> Hey everyone. Is anyone using rsync in production?  I'm doing some research about backup tools and would like to ask you some questions.
[18:44] <bekks> BradPJ: USe your package management system to uninstall old kernel versions. Do not remove them manually.
[18:44] <bekks> mferranti: Then ask your questions. Thousands of people use rsync productively.
[18:44] <scrubfest> I lost internet connection for a few seconds, did what I write pop up?
[18:44] <BradPJ> bekks: Ah they remain in the package manager. That is simpler than I thought. Thanks!
[18:44] <yorwos> how can i install a monitor profile (.icc) on ubuntu studio 13.10 with xfce 4.10 ?
[18:45] <mferranti> bekks: true.  thanks.
[18:45] <JoeyJoeJo> How can I find out what is using a device in /dev? I want to open /dev/ttyUSB0 but it keeps saying that it's in use
[18:45] <bekks> scrubfest: I did not even read the link you posted, I just said that not every USB port is appropriate for charging an iDevice.
[18:45] <scrubfest> I have now tried both ports. Still nothing :(
[18:46] <scrubfest> (I only have two USB-Ports)
[18:46] <daftykins> scrubfest: which ubuntu version?
[18:46] <mferranti> What do people like about rsync?  What annoys you about rsync?
[18:46] <scrubfest> 12.04
[18:46] <scrubfest> LTS
[18:46] <yelu> scrubfest: did you have and tried other USB ports?
[18:46] <bekks> mferranti: How is that relevant as ubuntu support issue?
[18:47] <scrubfest> Yes I have tried both available ports with two different cables
[18:47] <gareppa> quick survey: how many of you/the people you know use xmpp/jabber?
[18:47] <bekks> scrubfest: Then maybe your usb ports are incapable of charging an iDevice.
[18:47] <daftykins> gareppa: no surveys in here.
[18:47] <bekks> !poll | gareppa
[18:47] <bekks> hmm.
[18:48]  * daftykins kicks ubottu 
[18:48] <BradPJ> scrubfest: I know nothing about iOS on Ubuntu, I gave up years ago, but checking out that link you posted - it was written last year. iOS has changed since then so it may not work anymore. It MAY work, it just also may not. That would NOT effect the ability to charge however, that appears to be a different problem.
[18:49] <yelu> scrubfest: Check your phone and your cables with another Ubuntu machine (other model/type/brand)
[18:49] <mferranti> bekks seems relevant in that rsync is a common backup tool on ubuntu.  Trying to understand things that people running ubuntu would like to do with backups.  Forgive me if its off topic.
[18:49] <melkor> I would like to replace my current hdd with an ssd. I have a usb enclosure, and a bootable thumb drive. What is the least painful way to copy over my current os to my new hard drive?
[18:49] <hackal> Hello, I am running apache2 , it looks like I do not have 000-default file in /etc/apache2/sites-enabled/ can I create it manually? Or what should I do?
[18:49] <bekks> mferranti: "what do you like about it" is totally irrelevant in every support channel. Do you have specific support related questions about rsync?
[18:50] <daftykins> melkor: partition the SSD, then copy the whole data over from a live session
[18:50] <BradPJ> melkor ; I do backups frequently using RSync and restoring them using RSync. RSync will allow you to move the installation to new drive, if you know how to repair the FStab and install a bootloader on the new drive.
[18:51] <daftykins> melkor: you'll need to look into the man page of 'cp' to maintain all permissions etc.
[18:51] <yelu> hackal: yes you can create it manually
[18:51] <chowder> melkor: I would use dd to copy it over
[18:51] <daftykins> hackal: if it's a clean install it may be named something else. is a website working from http://localhost/ ?
[18:51] <BradPJ> melkor ; Using rsync with the -aAXV options keeps permissions correct.
[18:51] <chowder> melkor, but be very careful with dd. make sure you read the man page
[18:51] <BradPJ> melkor -aAXv sorry
[18:52] <hackal> daftykins: it looks like it is pre-configured ubuntu 13.10 for wordpress from digitalocean
[18:52] <chowder> BradPJ, question: why use rsync over dd?
[18:52] <link_> Hmm, as I tried to detach the cable my computer turned itself off
[18:52] <daftykins> chowder: that'd be a waste of time though
[18:52] <daftykins> chowder: the disks will be different sizes and you'd copy all empty space
[18:52] <melkor> chowder: I was curious about dd when I have an ssd and an hdd. Do you know if that will cause an issue?
[18:52] <BradPJ> chowder ; I know how to use RSync as I got my daily cron job using it and my disks are different sizes.
[18:52] <chowder> daftykins: good point.
[18:52] <daftykins> dd is a bad idea
[18:53] <chowder> melkor: daftykins has a good point. with dd you would be copying empty space and if you have a limited amount of space then rsync would be best.
[18:54] <melkor> The disks are the same size.
[18:54] <daftykins> you want to minimise writes to SSDs
[18:54] <daftykins> so dd is a bad idea
[18:54] <daftykins> i will not repeat myself again :)
[18:54] <phlux> hey guys is ubuntu 14.04 going to remove the amazon spyware
[18:54] <phlux> just curious
[18:55] <bekks> There is no spyware.
[18:55] <daftykins> #ubuntu+1
[18:55] <daftykins> ask in there.
[18:55] <phlux> oh right
[18:55] <chowder> melkor: yeah a SSD has a limited number of writes and dd will do quite a bit of writing. rsync will also be faster
[18:55] <BradPJ> phlux : Not really supposed to be here, but the Amazon stuff can be removed so easily it is not even an issue to be honest.
[18:55] <phlux> right
[18:55] <phlux> not an issue
[18:56] <phlux> i mean, no other linux distribution sends your information to amazon by default
[18:56] <phlux> but it's not an issue, you're right
[18:56] <k1l> phlux: just disable it in the privacy settints in the system settings. easy one
[18:56] <BradPJ> plux: It CAN be handy. Saying that, it is the first thing I removed upon installing Ubuntu.
[18:56] <BradPJ> phlux * sorry
[18:56] <phlux> i'm just asking out of curiosity
[18:56] <phlux> i don't use ubuntu
[18:57] <k1l> phlux: and if you just want to make drama, just go to another channel, thanks
[18:57] <phlux> k1l: i wouldn't know how to 'make drama'
[18:57] <phlux> make: *** No rule to make target 'drama'.  Stop.
[18:58] <melkor> So boot to a liveusb, setup the partition table and copy the files using rsync -aAXv what about grub?
[18:58] <daftykins> sudo grub-install /dev/sdX - where X is the SSD
[18:59] <daftykins> !grub | melkor
[18:59] <nutzz> hey guys, everytime I plug in the AC cable docky is closing, this is happening since I have updated to 14.04
[18:59] <quantanamera> hello everyone, my sound is gone again. it happens every now and then after using headphones, though I change nothing. I forgot the suggested solution from last time, can you help me again please? :)
[19:00] <melkor> daftykins: so I will have to do the grub after I physically swap the drives since the sdX will change?
[19:00] <daftykins> nutzz: 14.04 isn't final yet. talk in #ubuntu+1
[19:00] <daftykins> melkor: oh come to think of it you'll need to change the UUIDs of your partitions in /etc/fstab too
[19:00] <daftykins> melkor: have a read of the GRUB docs above
[19:05] <quantanamera> hello everyone, how can I bring back the sound on my pc?
[19:05] <daftykins> where did it go?
[19:05] <quantanamera> daftykins :)
[19:06] <k1l> power on the speakers :)
[19:06] <quantanamera> k1l they are on :)
[19:06] <TheReduxPL> Hello. I want to uninstall Ubuntu but in order to do it, I have to remove the GRUB bootloader and put Windows 8.1 Loader into the place
[19:06] <TheReduxPL> How can I do that without having an installation disc?
[19:06] <guest232313> sudo  chmod -R 775 anything bad rep like 777
[19:07] <guest232313> same with chown -R www-data:www-data ?
[19:09] <quantanamera> whether online video, desktop music player..no sound from nothing
[19:09] <BradPJ> TheReduxPL : So you actually looked into this before removing Ubuntu. I didn't many years ago. Big mistake! Anyway EasyBCD under Windows can restore the Windows bootloader for you.
[19:10] <BradPJ> TheReduxPL: Best method is of course the installation disk. There are also other methods out there.
[19:10] <TheReduxPL> BradPJ, I'll try it, thank you :)
[19:10] <yelu> hackal: If you ordered from digitalocean then there might be some support for their product (Ubuntu/Apache/Wordpress). - Why not ask them for a "helping hand" with the eventually preconfigured/customized 000-default for your Apache?
[19:12] <quantanamera> have I asked something very stupid, very trivial or is everyone very busy or otherwise unable to relate to my humble presence? :)
[19:13] <BradPJ> quantanamera: Do you use PulseAudio?
[19:13] <hackal> yelu: thanks, I will and it looks like it is issue with wordpress and not apache2
[19:14] <quantanamera> BradPJ, yes
[19:14] <k1l> quantanamera: check if the hardware is ok. then: what happend as there was no sound the first time?
[19:14] <BradPJ> quantanamera: One, I haven't tried this application under Ubuntu before. Installing it now, I'll let you know on something.
[19:14] <BradPJ> one sec*
[19:14] <vaskozl> Hey lovely people!
[19:15] <quantanamera> BradPJ, thank you!
[19:15] <JuneBUG> Guarira Guatanamera.........Quantanameraaaaaaaaa, Guarira Quantanamera...
[19:15] <BradPJ> quantanamera: Right try installing pavucontrol - It gives better control over audio devices then sound settings does.
[19:16] <rww> JuneBUG: have an Ubuntu support question we can help you with?
[19:16] <vaskozl> I have a quick question anyone should be able to answer: If I've uninstalled unity, lightdm, music players and such, replacing them.. What happens when I sudo dist-upgrade to 14.04 when it comes out?
[19:16] <quantanamera> k1l, the hardware is ok. this happens occasionally after inserting headphones. there is still sound with headphones.
[19:16] <BradPJ> quantanamera When changing between headphone it is possible it changes the type of device. You can configure this under pavucontrol, you can also tell where to make the output come out of.
[19:16] <Jordan_U> !upgrade | vaskozl
[19:16] <BradPJ> quantanamera : Yeah sounds like under pavucontrol, go to output devices and changing the port to speakers will fix it.
[19:17] <vaskozl> Jordan_U: ehh I was looking for an answer to my question
[19:17] <quantanamera> BradPJ, ok, installing pavucontrol now
[19:17] <vaskozl> not how to upgrade
[19:17] <vaskozl> especially considering I don't have unity
[19:17] <vaskozl> what would happen if I were to upgrade with all the packages that I have uninstalled?
[19:18] <vaskozl> would they be installed again?
[19:18] <rww> vaskozl: hrm. Do you have any *-desktop metapackages installed?
[19:18] <vaskozl> will check
[19:18] <Jordan_U> vaskozl: In the past, upgrade notes have recommended that you have at least one ubuntu- metapackage installed when you upgrade. I expect the same advice will be given for upgrading to 14.04.
[19:19] <vaskozl> Jordan_U, rww: how do I check please
[19:19] <scrubfest> Is there a command in terminal to escape the current action?
[19:19] <bekks> scrubfest: which action?
[19:20] <scrubfest> bekks like installing a program
[19:20] <rww> vaskozl: apt-cache policy ubuntu-desktop
[19:20] <bekks> scrubfest: you dont terminate such actions.
[19:20] <vaskozl> thx
[19:20] <Jordan_U> vaskozl: dpkg -l | grep -- '-desktop '
[19:20] <rww> vaskozl: oh, Jordan_U's is probably better
[19:21]  * urda is so excite about 14.04
[19:21] <rww> (I use aptitude and know how to do it there, but... aptitude.)
[19:21] <scrubfest> What do you mean? I can force quit terminal, that would do the trick.
[19:21] <vaskozl> rww, Jordan_U : http://pastie.org/private/ohmhoryosshipub26shfq
[19:21] <bekks> scrubfest: And it will leave you with broken packages. Thats not what you want.
[19:22] <quantanamera> BradPJ, when you said pavucontrol I'd thought this was another software. I already have pulse audio, and the output is set to speakers. but still no sound
[19:22] <scrubfest> So if I regret installing something midway I should wait
[19:22] <scrubfest> and then remove it?
[19:22] <rww> scrubfest: correct
[19:22] <rww> vaskozl: okay, so not installed
[19:22] <BradPJ> quantanamera: pavucontrol is similar to Sound Settings, but gives more control.
[19:22] <vaskozl> so what happens when I dist-upgrade when 14.04 comes out?
[19:22] <rww> vaskozl: I *think* it won't install ubuntu-desktop and its packages again. It will tell you what it's going to do before it does it (at least do-release-upgrade on the command-line does), and I'd recommend checking that carefully before saying OK.
[19:23] <scrubfest> Does ubuntu multi-task so to speak. I can install a program, minimize the installtion and it will keep going. Right?
[19:23] <BradPJ> quantanamera What does it say the device is under Configuration ?
[19:23] <vaskozl> rww: thx, you answered my question perfectly
[19:23] <scrubfest> I feel like it's only unpacking when I have the window open
[19:23] <quantanamera> BradPJ, it says Analog Stereo Duplex
[19:24] <BradPJ> quantanamera : That sounds all correct. And sound works with Headphones still but not speakers?
[19:24] <Jordan_U> vaskozl: So you don't have any of the -desktop packages installed. I don't remember if the old recommendation of re-installing ubuntu-desktop was there to avoid upgrade dependency issues, or just to ensure that you have a completely functional (GUI login with expected functionality) system post-upgrade. I expect it was the latter, in which case it would be safe to not install ubuntu-desktop as long as you're aware of what ...
[19:25] <Jordan_U> ... packages you actually need, and are OK with the prospect of possibly not being able to login graphically after upgrade if you forget something important.
[19:25] <quantanamera> BradPJ, that's how it is
[19:25] <BradPJ> quantanamera: Is anything muted under pavucontrol? This is really weird. I get the same issue (rarely but still occurs) and all whats happened is that my output is set to headphones.
[19:26] <quantanamera> BradPJ, no, all sounds are on.
[19:27] <BradPJ> quantanamera: I'm not sure what else to say. Have you checked alsamixer? Speakers could be muted there I guess but I don't see why it would be.
[19:27] <quantanamera> BradPJ, solved.
[19:27] <BradPJ> quantanamera: Ah that's great news! What was the problem?
[19:28] <quantanamera> BradPJ, the sound symbol on system tray is not shown as mute, so I never thought of checking the sound button on the hardware.
[19:28] <quantanamera> it had been turned off
[19:29] <quantanamera> BradPJ, strange, I'd expect the sound to be shown "off" when the hardware button was pressed
[19:30] <BradPJ> quantanamera: Ahh at least it was something simple I guess. Glad you got it sorted. Yeah that is rather weird though.
[19:31] <BradPJ> quantanamera : Don't forget to uninstall pavucontrol if you don't need or want it :)
[19:31] <Chewy64> Is there an effective way to mirror drives on the desktop version of 12.04?
[19:32] <quantanamera> BradPJ, sorry for taking your time in vain!
[19:32] <Anton-Vidovich> how i can install spoonwep on ubuntu 13.10
[19:32] <quantanamera> BradPJ, pavucontrol is useful, I use it from time to time
[19:32] <bekks> !info spoonwep | Anton-Vidovich
[19:33] <BradPJ> quantanamera : No problem at all! I'm sure I've done similar things to people in the past haha.
[19:33] <Anton-Vidovich> ubottu thanx bro
[19:33] <dusf123> small /home partition and a large data partition or just one large /home partition?
[19:34] <quantanamera> BradPJ, thank you very much for your kind help!
[19:34] <k1l> Anton-Vidovich: wifi hacking is not supported in this channel, thanks
[19:34] <Jordan_U> Chewy64: Are you trying to RAID existing partitions/volumes or are you wanting to create a new array? Or alternately, are you just reffering to backups rather than RAID?
[19:34] <BradPJ> dusf123 : My personal set up is to have a storage folder in /home and one large home partition. Especially if you use Steam, by default games are installed in your home folder and so you may need more space than you imagine.
[19:35] <Anton-Vidovich> ok i want just information for that
[19:35] <BradPJ> dusf123 ; I then symlink my Music, Document folders etc to my home directory.
[19:35] <BradPJ> quantanamera: No problem at all.
[19:35] <k1l> Anton-Vidovich: see the projects documentation
[19:35] <DammitJim> does ubuntu normally ask for what services need to be restarted after upgrading openssl?
[19:35] <Anton-Vidovich> ok bro thanx
[19:36] <wences> hola
[19:36] <Anton-Vidovich> hola too
[19:37] <quantanamera> hola three
[19:37] <Anton-Vidovich> hola four
[19:37] <dusf123> BradPJ: interesting. i thought one advantqnage of a small home would be that it could be easily backed up and restored with all our settings
[19:38] <quantanamera> Anton-Vidovich reminds me of Anton Pavlovic (Chekhov)
[19:38] <Jordan_U> dusf123: You only need to disable fastboot (or otherwise set your Ubuntu install CD/USB as a boot device) once to install. Once Ubuntu is installed, you can re-enable fast boot. And I generally recommend against having a separate /home/ partition at all. The main reason I can think of for having a separate data partition is if that data needs to be shared between Ubuntu and Windows.
[19:38] <Anton-Vidovich> i proud on my name
[19:38] <BradPJ> dusf123: If you kept a storage folder and your home directory you would still get that benefit. You could backup home /home/dusf123 which would NOT have any music, documents etc in as they could be in your /home/storage folder
[19:39] <quantanamera> yes, sounds like a classical novel hero.
[19:39] <dusf123> BradPJ: also, having a separate data partition would allow easy sharing of data betweeen windows, ubuntu, debian etc
[19:39] <dusf123> Jordan_U: that is great news re fast boot, thank you :) see my previous on sharing data. i like a separate home for reinstalling and clean vinstalling
[19:39] <Anton-Vidovich> thanx quantanamera
[19:40] <BradPJ> dusf123: If you are dualbooting with Windows then I do recommend a seperate data partition. If sharing data between multiple Linux's then one big home is probably better. You could still share the /home/storage between all Linux distro's.
[19:40]  * dusf123 digests
[19:41] <BradPJ> My home folder looks like .. /home/arch/brad, /home/ubuntu/brad and /home/storage. Both distro's have access to my /home/storage and are symlinked to it.
[19:41] <quantanamera> call me Dimitry Ivanov Ivanovich
[19:41] <quantanamera> my pleasure
[19:41] <dusf123> you have different linux distros using one single /home partition?
[19:41] <Jordan_U> dusf123: Ubuntu's installer can handle re-installing while perserving /home/ even when /home/ is just a directory within your root filesystem.
[19:42] <BradPJ> dusf123, Yes, but with different home directories
[19:42] <dusf123> Jordan_U: i was not aware of that. also, clonezilla can only back up partitions
[19:43] <dusf123> Jordan_U: i feel there is less chance of me breaking something if /home is separate
[19:44] <wences> hola
[19:44] <quantanamera> hola too
[19:45] <Chewy64> Jordan_U, backup. I have an existing physical disk containing Ubuntu 12.04 and a shitload of VMs and databases. I want to add another physical disk to create a mirror for redundancy/backup.
[19:45] <quantanamera> que tal, wences?
[19:45] <Beldar> Chewy64, NO swearing here please. ;)
[19:45] <Chewy64> Beldar, No swearing on the internet?
[19:46] <jhutchins> dusf123: Clonezilla can do several things besides partclone.
[19:46] <dusf123> BradPJ: i never saw an option in the ubuntu installer to select /home as a directory of a partition rather than just a partition?
[19:46] <dusf123> jhutchins: it also diskclones
[19:46] <BradPJ> dusf123 : Oh yeah that's right. I moved my directory after I installed.
[19:46] <dusf123> jhutchins: it can backup single directories?
[19:46] <Beldar> !language | Chewy64 So it's clear
[19:47] <k1l> !away > thewisenerd
[19:47] <Jordan_U> !backup | Chewy64
[19:47] <jhutchins> The problem with sharing $HOME with multiple distros is that they have different versions of programs that rely on configuration data stored in (usually hidden) subfolders of $HOME.
[19:48] <quantanamera> could you please help me as to how can I make itunes work on 12.04. (64bit) ? I already installed wine
[19:48] <Chewy64> jhutchins, I only have one OS sitting ontop. Everything else sits in VMs, so I'm not sharing HOME with anything,
[19:48] <BradPJ> jhutchins: That's why I've recommened my set up .. /home/storage /home/arch/brad /home/ubuntu/brad . I then symlink in both home directories to /home/storage. Keeps my settings and files seperate.
[19:48] <ikonia> quantanamera: it doesn't work
[19:49] <Chewy64> jhutchins, Woops. Thought you were talking to me.
[19:49] <quantanamera> ikonia, that's how my experience has been in the past, but it still doesnt work?
[19:49] <Anton-Vidovich> quantanamera you are from....
[19:49] <jhutchins> Eh, generall comment.
[19:49] <ikonia> quantanamera: correct
[19:50] <quantanamera> dear Anton-Vidovich, I'd requested you to call me Dimitry Ivanov Ivanovich
[19:50] <BradPJ> dusf123 : usermod -md /my/new/home would move your home directory and files if you was ever interested in doing it.
[19:50] <jhutchins> quantanamera: iTunes wants low-level acccess to hardware that can't happen in Linux, even with Wine.
[19:51] <quantanamera> I don't disclose personal details on public channels, Anton-Vidovich.
[19:51] <Chewy64> Beldar, Well, lokos liek "shit" is define by Merriam-Webster, so I'll consider it within the english language. And as used as a description-modifier, it can't be considered impolite. http://www.merriam-webster.com/dictionary/shit
[19:51] <ikonia> Chewy64: tone down the language please.
[19:52] <ikonia> Chewy64: there is no need for it, and it's not welcome
[19:52] <quantanamera> jhutchins, I see..thank you for your information!
[19:52] <Chewy64> Jordan_U, Hmmm, interesting. Bacula 1 2 looks like it'll service my needs. I'd prefer "real-time" or as close to for the mirroring.
[19:53] <phasip> I am trying to install steam from the software center but when I do I get "Depends: libc6 (>= 2.15) but 2.17-93ubuntu4 is to be installed"
[19:54] <ikonia> phasip: so the version you are using in ubuntu is too new
[19:54] <Anton-Vidovich> thanx bro
[19:55] <rww> odd, 2.15 is >= 2.17-93ubuntu4
[19:55] <phasip> ikonia: Oh, I thought it needed a version more or equal to 2.15 =/
[19:55] <ikonia> phasip: that's how it should be, but it's not working that way
[19:55] <quantanamera> but earlier when I connected the hardware,it at least used to be recognized by ubuntu, and I could skip the need to use itunes and directly add or remove songs from nautilus. this time the mp3 player isnt recognized. can I enable it somehow?
[19:55] <ikonia> quantanamera: itunes does not work
[19:56] <ikonia> quantanamera: ipods - do not work (stable)
[19:56] <phasip> Allright, thanks ikonia
[19:57] <quantanamera> ikonia, it used to, before, meaning modifying songlist on nautilus
[19:57] <quantanamera> now it doesnt even get detected as hardware
[19:58] <ikonia> quantanamera: they are not stable enough to use/depend on
[19:59] <quantanamera> ikonia, I understand. thank you for your help!
[19:59] <delinquentme> Does anyone have suggestions for a failing unity launcher ... I'm running on a system upgraded from 10.04 to 12.04
[19:59] <ploertekut> hello
[20:02] <Beldar> !details > delinquentme
[20:02] <someHuman> Hello!
[20:02] <someHuman> So I just installed 13.10
[20:03] <someHuman> I am stuck at a prompt wherein it tells me to remove disc and press enter.
[20:03] <daftykins> someHuman: hit reset
[20:03] <bekks> someHuman: So remove the disc and press enter.
[20:03] <Chewy64> Removed the disk/USB key and restart. Just a generic message.
[20:03] <Randomguy9900> Hey guys.  I finally got some sound working on my laptop, just loaded with lubuntu.  To do so I just installed pulseaudio.  Although now, my sound only works on headphones, and even then it's extremely quiet.  (I have checked and maxed out levels in alsamixer) Thanks
[20:03] <someHuman> bekks: That's what I did.
[20:04] <someHuman> daftykins: I've done that many times already and haven't even able to boot into Ubuntu itself installing 13.10 via disc.
[20:04] <daftykins> someHuman: you removed the disc before resetting, yes?
[20:04] <someHuman> For sure I'll be unable to boot into it again.
[20:04] <someHuman> daftykins: Yes.
[20:04] <quantanamera> Randomguy9900, just had exactly the same problem. did you check the output device at pulseaudio?
[20:04] <daftykins> someHuman: so what does it do?
[20:04] <daftykins> black screen?
[20:04] <someHuman> I just left it stuck with the prompt.
[20:04] <someHuman> daftykins: What should be my PC be doing anyway?
[20:04] <bekks> someHuman: which is impossible when restting your computer.
[20:04] <someHuman> I've already removed CD and pressed enter already.
[20:04] <bekks> someHuman: Restart it.
[20:05] <Randomguy9900> quantanamera: Where would I do that? (Probably noob question but I'm just picking this up)
[20:05] <someHuman> Ok?
[20:05] <quantanamera> passing on the solution I got from BradPJ..
[20:05] <quantanamera> Randomguy9900, among pulse audio tabs you have "output device" tab
[20:06] <Randomguy9900> quantanamera: .... haha yeah I where do i find these pulse audio tabs?
[20:06] <someHuman> Dammit I wiped my Windows 8.1 Pro wtf?!
[20:06] <someHuman> I knew it.
[20:06] <quantanamera> Randomguy9900, maybe first check (if there is any) the sound buttom on your computer
[20:06] <quantanamera> check if it is turned off
[20:06] <someHuman> Am again running in low-graphics mode.
[20:07] <quantanamera> Randomguy9900, button*
[20:07] <someHuman> Telling me to configure screen, graphics card and device settings by myself.
[20:08] <quantanamera> Randomguy9900, if there is nothing turned off there, start pulse audio, and you'll see titles as that go on as "playback, recording, output devices.."
[20:08] <Randomguy9900> quantanamera: Would I start it by typing "pulseaudio" into terminal?  Because when I do so, it says Daemon is already running
[20:08] <quantanamera> go to output devices, and check what is selected as "port".
[20:09] <lapor> hey
[20:09] <lapor> i have a huge problem and would kindly ask for some help
[20:09] <quantanamera> Randomguy9900, I haven't tried to start it via terminal, but if you get that message probably it is about to open or has already opened at the background
[20:09] <lapor> Is there a way to get prevoious files from ubuntu one?
[20:10] <Randomguy9900> quantanamera:  Treat me like I'm a five year old on how to start it hah.  If you were to start pulseaudio to do what you're telling me, how would you do that?
[20:10] <quantanamera> Randomguy9900, otherwise you can type pulseaudio as search word
[20:10] <dreaser> hi
[20:11] <lapor> i managed to sync my old files, wich were in trash and back alive again
[20:11] <lapor> and now i have one year old files everywhere
[20:11] <lapor> all my one year data is goen
[20:11] <quantanamera> Randomguy9900, type "pavucontrol" on terminal
[20:11] <quantanamera> then it opens
[20:11] <lapor> is there a way to get previous files back?
[20:12] <chaitu> is there a way to install windows applications in ubuntu?
[20:12] <Randomguy9900> quantanamera: Not installed. That may be an issue. Installing now
[20:13] <quantanamera> Randomguy9900, typing pulseaudio gives the same error on my terminal.
[20:14] <BradPJ> Randomguy9900 : pavucontrol is like sound settings, just with more options, which is why it is not installed by default. If there is any problem with pulseaudio regarding sound levels you should be able to fix it here
[20:14] <Randomguy9900> I
[20:15] <Randomguy9900> quantanamera & BradPJ: I am geting response and volume on the mixer.  Going to ALSA plug-in[plugin-container]: ALSA Playback
[20:16] <prattmic> I am on Ubuntu 12.04, and am getting errors updating bluez: /var/cache/apt/archives/bluez_4.98-2ubuntu7.1_amd64.deb; invoke-rc.d: unknown initscript, /etc/init.d/bluetooth not found
[20:16] <Randomguy9900> Output Devices: Port: Headphones / Amplifier
[20:16] <ice9> what apps or services that access this url daisy.ubuntu.com?
[20:16] <BradPJ> Randomguy9900 : Is your headphone plugged in at the moment?
[20:16] <Randomguy9900> yes it is
[20:17] <quantanamera> chaitu, you can install them via wine, mostly
[20:17] <Randomguy9900> And when it isnt, I get no sound from the speakers
[20:17] <BradPJ> Randomguy9900: Remove the headphones and see if the port changes.
[20:17] <Pici> ice9: https://help.ubuntu.com/community/AutomaticConnections
[20:17] <Randomguy9900> BradPJ: All of the information remains the same, whether in or out
[20:17] <quantanamera> chaitu, not all of them can work, though
[20:18] <lapor> anyone?
[20:18] <lapor> please
[20:18] <BradPJ> Randomguy9900: Can you change the port to speakers?
[20:18] <bekks> lapor: Restore your backup.
[20:18] <chaitu> thanks quantanamera
[20:18] <chaitu> will try
[20:18] <lapor> how can I restore my backup...
[20:19] <bekks> lapor: Grab the backup medium you created and restore your files.
[20:19] <Randomguy9900> BradPJ: Changing settings takes the static away. It now says Headphones/No Amplifier
[20:19] <quantanamera> sure, chaitu
[20:19] <Randomguy9900> BradPJ: Though I can hear this litle murmur of the song that's going on
[20:20] <Randomguy9900> BradPJ: Just like farts of the song, barely noicable, but makes sencse with the beat
[20:20] <chulis> is possible to change my nick colour in xchat.gnome?
[20:20] <BradPJ> Randomguy9900: Are all your volumes okay? Check under output devices and playback.
[20:21] <LtRipley> hi
[20:21] <LtRipley> i have some processes (qjackctl) around, where even a killall -9 doesn't kill it, what might be the reason that the kill fails?
[20:22] <JoeyJoeJo> How can I change the order that apps start? I want gpsd to start before ntp
[20:22] <lapor> but I have the same files on my laptop and on my ubuntu one
[20:22] <Randomguy9900> BradPJ: I've been messing with that volume, and alsamixer.  The non-alsa one can let me bump the volume much higher, but it doesn't make it louder, just more sound clipping at like a pin drop volume
[20:22] <xangua> lapor: ubuntu one doesn't backup previous versions of your files and you should think to migratin since sync files will shut off
[20:23] <BradPJ> Randomguy9900: I'm starting to run out of ideas. What does it say under Configuration ? What type of device is it set too?
[20:23] <lapor> ok, so there is no way to get those files back?
[20:23] <lapor> i think my world just collapsed...
[20:24] <bekks> lapor: so you have no backup copies of your data?
[20:24] <alex72gr> hello everybody! does anybody know if the optical output (s/pdif) of the on board sound card is supported on linux? the on board sound card is a RealTek one...
[20:24] <lapor> no
[20:24] <Randomguy9900> BradPJ: I've tried all of them. I only get response on Audio Stereo Duplex and Audio Stero Output
[20:24] <bekks> lapor: Then your files were not worth to be kept.
[20:25] <DarkStar1> which is more stable 13.04/13.10
[20:25] <DarkStar1> ?
[20:25] <Pici> DarkStar1: 13.04 is no longer supported, so I wouldn't go with that one.
[20:25] <DarkStar1> ok
[20:26] <BradPJ> Randomguy9900: Audio Stereo Duplex is what mine is set too. Are you sure you can't change the port? It should say speakers when headphones are unplugged.
[20:26] <Slart> JoeyJoeJo: there's probably a clever way of using upstart/systemd or whatever to do this.. but you could always do a little loop checking for the gpsd process before launching ntp
[20:27] <novice> Hello - what is the preferred and easiest way to issue a few simple ifconfig commands upon system startup?
[20:27] <Slart> JoeyJoeJo: or create a script you run at boot/login where you first start one.. then the other
[20:28] <Randomguy9900> BradPJ: I get best results by slamming up the ALSA Playback volume and down on the Output device.  Though it's still completely unusable and no speaker sound.  I'm positive it does not change.  No change in text anywhere when I plug or unplug
[20:28] <Randomguy9900> Never the word speakers, just headphones
[20:28] <Slart> !startup | novice
[20:28] <novice> !boot
[20:28] <BradPJ> Randomguy9900: You can change the port yourself though if pulseaudio recognises it.
[20:29] <BradPJ> Randomguy9900: You can try resetting PulseAudio if it was working earlier. In the terminal type 'pulseaudio --kill' (no quotations) and then type 'pulseaudio' (again no quotations)(this may fail if pulseaudio has already started up again on its own - it sometimes does that).
[20:29] <BradPJ> Randomguy9900: Entering the two commands separately of course.
[20:30] <Randomguy9900> BradPJ: Okay. Well now there's no devices available and no sound is coming out -_- Damn this stuff
[20:31] <Randomguy9900> BradPJ: Correciton, there are the same headphones/amplifier thing available. But levels are missing that show the current sound that should be outputting, and ALSA and all that stuf is gone from the main tab
[20:31] <BradPJ> Randomguy9900: After resetting pulseaudio? Wow, sorry. That must be the problem though. At the moment Pulseaudio doesn't recognise your Sound device.
[20:32] <Randomguy9900> BradPJ: No reason to be sorry haha. Helps figure something out.... hopefully
[20:33] <alexxa20> j #floss-magazin
[20:34] <BradPJ> Randomguy9900: In the terminal does typing 'pactl list cards' list your sound card?
[20:34] <Randomguy9900> Anybody in this room have great ideas or possibilities on why pulseaudio can't recognize my audio stuff right and I am getting clipping, extrememly low level volume?
[20:35] <DarkStar1> whenever I attempt a release upgrade from 13.04 I get the following error http://fpaste.org/94142/13975076/
[20:35] <Slart> Randomguy9900: haven't seen the previous discussion but are you sure alsa is setup properly?
[20:35] <DarkStar1> anyone know what’s causing this?
[20:35] <Slart> Randomguy9900: you've installed the pavucontrol?
[20:35] <tfh> hi, I got a lenovo ideapad, with ubuntu 13.10 on it, how can I use the select text (to copy) and then paste ? on my old laptop I used to select, and click both buttons and it used to paste, any ideas?
[20:35] <Slart> Randomguy9900: checked all the settings you get by running alsamixer in a terminal?
[20:35] <Randomguy9900> BradPJ: http://paste.ubuntu.com/7251726/
[20:36] <BradPJ> Randomguy9900: Okay how are your speakers attached to your PC?
[20:36] <Randomguy9900> Slart: I've been messing with audio levels in both alsa and pavu and changing every device I can in pavu.   It just had ALSA on there, last occurence of pulseaudio, and I got very weak, clippy signal. Now nothing in the first tab
[20:37] <Randomguy9900> BradPJ: They're built in to the laptop
[20:37] <DarkStar1> can anyone help?
[20:38] <BradPJ> Randomguy9900: I can't see any port for speaker output in that output. I can only see SPDIF, Headphone with Amp, Headphones without Amp. It doesn't seem to recognise your internal speakers.
[20:38] <Randomguy9900> BradPJ: Alright, good to know. Just haven't the first clue as to how to get it to recognize that.  If possible
[20:39] <BradPJ> Randomguy9900: On my external sound card, sometimes it doesn't get recognised as a 5.1 card but only a stereo card. The only thing that fixes that is a reboot unfortunately. If you haven't tried that and are doing nothing important I guess a reboot could be a good thing to try.
[20:40] <Randomguy9900> BradPJ: See ya in a few :)
[20:40] <tfh> can someone mention my name please, I want to check if the chat client is notifying me when someone does
[20:40] <BradPJ> tfh; sure
[20:40] <Jordan_U> tfh: In the future, please use #test.
[20:40] <Slart> tfh: I think there are channels for this kind of thing.. might be #test .. there are bots there that will say your name and so on
[20:41] <tfh> thanks all, I wasn't aware of #test,  and xchat isn't notifying me unfortunately
[20:42] <Macintrasher> don't mind me.  I'm lurking.
[20:45] <scrubfest> I am trying to launch a .jar and I am getting this error: Exception in thread "AWT-EventQueue-1" java.lang.NoClassDefFoundError: sun/misc/Hashing
[20:46] <scrubfest> I think I've setup java wrong, because I've asked around and the .jar works for other people, both on windows and ubuntu
[20:46] <Randomguy9900_> BradPJ: We're back to having ALSA on the first tab at least :/
[20:46] <DarkStar1> Can anyone help with my release upgrade problem
[20:46] <Randomguy9900_> BradPJ: Though still in the same place as we left off before I killed pulse
[20:46] <bgardner> scrubfest: How did you set up java?
[20:47] <BradPJ> Randomguy9900: Can you type 'pactl list cards' again please?
[20:47] <Randomguy9900_> I do have a couple new ones, so yeah
[20:47] <foobar33> I have the latest version of ubuntu installed, I have problems with ALT + TAB, it groups my programs of the same type together, which makes it really hard for me to select the window I want.
[20:47] <Randomguy9900_> That dont do anything though
[20:48] <Randomguy9900_> BradPJ: http://paste.ubuntu.com/7251807/
[20:48] <scrubfest> bgardner, I just did sudo apt-get install eclipse-platform
[20:49] <scrubfest> And when I went to java to install it, it had already been installed probably by the previous install
[20:49] <jareddlc> hey guys, i have this upstart config, but im new to linux, where do i put it and how do i install?
[20:49] <jareddlc> https://github.com/papertrail/remote_syslog/blob/master/examples/remote_syslog.upstart.conf
[20:49] <jareddlc> linux upstart*
[20:50] <Randomguy9900_> BradPJ: The Analog Mono Outputs don't seem to be attached to anything.  No speaker sound, no headphone sound. Doesn't matter plugged in or not
[20:50] <bgardner> scrubfest: What does 'update-java-alternatives -l' give you?
[20:51] <trism> jareddlc: it would go in /etc/init/ although I think you may have to drop the .upstart part or upstart may not recognize it properly
[20:51] <scrubfest> java-1.6.0-openjdk-amd64 1061 /usr/lib/jvm/java-1.6.0-openjdk-amd64
[20:51] <BradPJ> Randomguy9900: Well that's even more weird. Sorry I don't have any other ideas, your speakers should be listed under ports.
[20:51] <jareddlc> thx trism ill do just that
[20:52] <Randomguy9900_> BradPJ: Alright :/ If you've got nothing else, I'll just save it for a later day.  I got this lubuntu together just to write some code.   So it's not a huge issue, but it's nice to have sound on a laptop
[20:52] <Guest4562> hello
[20:53] <trism> jareddlc: oh just tested, having a . in the name is fine as long as you want the job to be called "remote_syslog.upstart" instead of "remote_syslog"
[20:53] <jareddlc> i'll remove it, thx
[20:53] <Guest4562>  helo ubuntu any one can talk to me plz
[20:53] <jareddlc> it thats how it was named in the example
[20:53] <jareddlc> but other then that
[20:53] <DarkStar1> Ok new q. generate the locale I want? locale-gen doesn’t seem to work in the sense that after generating the locale, the output of locale is still the same as before
[20:53] <jareddlc> next restart, it should load it and work properly?
[20:54] <BradPJ> Randomguy9900: It appears that PulseAudio doesn't even recognise you have speakers. If you have an application that you can change the output from Pulseaudio to ALSA then you may be able to get sound going straight through ALSA instead of Pulseaudio -> Alsa.
[20:54] <Guest4562> hello Mr Jaredd how is u
[20:54] <Randomguy9900_> BradPJ: One last thing.  Would you have any idea why in my system info it claims I have battery?  I'd like to check the level and all, but cant
[20:54] <bekks> DarkStar1: Thats perfectly what locale-gen does. It generates locales, it does not set any.
[20:54] <Randomguy9900_> BradPJ: *NO BATTERY
[20:54] <prime1309> anyone have experience running a ubuntu VM on a mac(mavericks) that could gimme a hand
[20:54] <trism> jareddlc: it looks fine as long as you have those binaries in the right spots
[20:55] <MaterialDefender> SHITLOADS
[20:55] <DarkStar1> I looked under the /var/lib/locales/supported.d/ and the new locales aren’t there
[20:55] <trism> jareddlc: you could try starting it with: sudo start remote_syslog; to see what happens
[20:55] <BradPJ> Randomguy9900: Not got any clue where to even start looking at that one sorry.
[20:55] <Randomguy9900_> BradPJ: I did think about that too. Though I wouldn't know how to reroute it or whatever.  We'll see
[20:55] <trism> jareddlc: you can check for errors in /var/log/upstart/
[20:55] <Guest4562> I cant read messages in Ubuntu yahoo mail any one can help
[20:55] <tfh> hi, I got a lenovo ideapad, with ubuntu 13.10 on it, how can I use the select text (to copy) and then paste ? on my old laptop I used to select, and click both buttons and it used to paste, any ideas?
[20:55] <jareddlc> thanks trism
[20:55] <BradPJ> Randomguy9900: Some applications have the feature built into their preferences but I can't remember any of the top of my head unfortunately.
[20:56] <Randomguy9900_> BradPJ: Haha, alright thanks man.  Thanks for your time helping me figure some stuff out and hopefully I'll figure that stuf out
[20:56] <BradPJ> Randomguy9900: No problem, hopefully you manage to get somewhere with it.
[20:56] <Dbugger> Hi guys. I have run into a problem with "sendmail" and I was hoping that someone could give me a hand? It is kinda long so I posted it here: http://askubuntu.com/questions/447795/configuring-sendmail-in-12-04-server
[20:58] <EpicCyndaquil> will using an unclosed color tag to color the text I input into the bash shell cause any problems?
[21:00] <chris11> what does > mean in the commandline?
[21:01] <EpicCyndaquil> chris11: http://linuxcommand.org/lts0060.php
[21:01] <chris11> Thanks.
[21:03] <chris11> That looks helpful. I was actually refering to something else. $ has been replaced with > after running a find command. The find command has also not executed. I think I got all of the ;
[21:03] <chris11> So is there any way to cancel the find command?
[21:03] <bekks> chris11: press ctrl c
[21:03] <Jordan_U> chris11: That means that the shell is expecting more input.
[21:03] <EpicCyndaquil> Ctrl+C should end just about any process, chris
[21:03] <chris11> Thanks, that worked.
[21:04] <Jordan_U> chris11: For instance if you entered the following in a shell, you would get a prompt since it's waiting for a close quote: echo "hello world
[21:04] <chris11> Alright, I'll check for forgotten "s then.
[21:05] <usr13> Dbugger: Did you install sasl2-bin ?
[21:06] <Dbugger> usr13, Idont htink I did
[21:06] <Dbugger> do i need it?
[21:06] <usr13> !info sasl2-bin | Dbugger
[21:07] <Dbugger> Ok, let me take a look
[21:07] <ice9> does ubuntu get tested by professional testers before releasing it? or it's only tested by users during the beta version?
[21:07] <usr13> Dbugger: (just reading from http://askubuntu.com/questions/447795/configuring-sendmail-in-12-04-server)  "sasl2-bin not installed, not configuring sendmail support."
[21:08] <someone12345> how do I add nautilus to the list of programs
[21:08] <someone12345> in kde
[21:08] <usr13> Dbugger: "To enable sendmail SASL2 support at a later date, invoke "/usr/share/sendmail/update_auth"
[21:08] <someHuman> Hello!
[21:08] <someone12345> hi
[21:08] <someHuman> I am stuck in low graphics mode after installing 13.10
[21:09] <usr13> Dbugger: And lines 43-48
[21:09] <anonx___> i'm trying to test a key-based ssh connection, but i'm getting a timeout error...my server connects through a router...could that be an issue?  i'm new to ssh
[21:09] <Jordan_U> ice9: Canonical certainly pays their employees to test Ubuntu, among other things. I don't know off hand how extensive that payed testing is.
[21:09] <anonx___> i'm pretty sure i have everything set up correctly
[21:09] <someHuman> Hello?
[21:09] <someHuman> Can someone help me? :(
[21:09] <someone12345> someHuman: I think you go to toubleshooting
[21:09] <usr13> someHuman: lspci | grep VGA  #What does that say?
[21:09] <someHuman> Wait
[21:10] <Jordan_U> someHuman: Please be patient, I would have responded already if I hadn't had to write this message asking you to be patient :)
[21:10] <someHuman> Jordan_U: Sorry :D
[21:10] <Jordan_U> someHuman: Did you get full resolution while running the LiveCD/USB?
[21:10] <scrubfest> Do any of you use skype? I am having issues with it freezing up every time I click on it
[21:10] <someHuman> Jordan_U: Yes, and I had 2 ver, of Live. UEFI and the other is probably BIOS.
[21:11] <scrubfest> and then it becomes available again a couple of minutes later.
[21:11] <someHuman> I chose UEFI btw.
[21:11] <scrubfest> It happens to frequently it is becomming quite of a nuisance
[21:11] <someHuman> Because it's the only one that works, and also have legacy enabled.
[21:11] <someone12345> when I got that problem I toubleshooting or something and restarted
[21:11] <someHuman> someone12345: What kind of troubleshooting?
[21:11] <DarkStar1> ok I solved my locale problem. However when I try release upgrade this time, I get a extracting 'saucy.tar.gz'   Can not run the upgrade  The error message is 'No such file or directory'.
[21:11] <DarkStar1> anyone know what’s causing this?
[21:12] <jhutchins> someHuman: Is nautilus installed?  It usually isn't if you just have kde.
[21:12] <someHuman> usr13: lspci returned me this "00:02.0 VGA compatible controller: Intel Corp. 3rd Gen Core processor Graphics Controller (rev 09)"
[21:12] <someHuman> jhutchins: I believe I have Unity DE
[21:12] <someHuman> I just got the default one.
[21:13] <someone12345> When I got that problem things. I when the list of things I can do. then I restarted. It took couple of time
[21:13] <someHuman> usr13: VGA is in color red btw.
[21:13] <melkor> What is a good way to make a liveusb? Unetbootin doesn't seem to be working for me.
[21:13] <someHuman> I am using an HP PC, might help you out guys.
[21:14] <usr13> someHuman: ls /etc/X11/xorg.conf    #What does that say?
[21:15] <someHuman> No such file/dir.
[21:15] <usr13> someHuman: "HP PC"?  Is it a laptop or desktop?
[21:15] <someHuman> usr13: No such file/dir.
[21:15] <usr13> someHuman: Ok good.
[21:15] <someHuman> Laptop, sorry.
[21:15] <Sven_vB> is there a keyboard shortcut to send SIGHUP provided by default, bash or screen?
[21:15] <jhutchins> someHuman: RIght, it's only used for special configurations these days.
[21:15] <usr13> someHuman: xrandr |pastebinit
[21:15] <someHuman> jhutchins: Ah ok
[21:15] <jhutchins> someHuman: More common to see files in /etc/X11/conf.d/
[21:15] <jhutchins> (I think that's the name)
[21:16] <someHuman> usr13: Tells me to install pastebinit first
[21:17] <someHuman> Can't also get it lol.'
[21:17] <usr13> someHuman: What?
[21:17] <Dbugger> usr13, sorry I got disconnected
[21:17] <someHuman> usr13: xrander | pastebinit tells me to to apt-get install it first.
[21:17] <usr13> someHuman: sudo apt-get install pastebinit
[21:17] <someHuman> usr13: It doesn't work.
[21:18] <someHuman> Tells me package unfound.
[21:18] <usr13> someHuman: What error do you get?
[21:18] <ice9> does Ubuntu use the Debain random generator?
[21:18] <someHuman> Maybe because I haven't been connected via wifi?
[21:18] <usr13> someHuman:  cat /etc/issue  #what does that say?
[21:18] <DarkStar1> this is the output of my mount command: http://fpaste.org/94158/75102371/ however when I try to mount tmp, I get the following error: mount: /tmp not mounted or bad option
[21:18] <k1l> ice9: :) no
[21:18] <Dbugger> usr13, I installed it, and it made no difference. It is still not working
[21:18] <usr13> someHuman: So this computer is not connected to the internet?
[21:18] <ice9> k1l: what does it use then?
[21:19] <someHuman> usr13: Ubuntu 13.10 \n \l
[21:19] <someHuman> usr13: Probably
[21:19] <Jordan_U> someHuman: sudo apt-get update && sudo apt-get install pastebinit # You will need to be connected to the internet
[21:19] <someHuman> I didn't connect it when I was installing 13.10
[21:19] <k1l> ice9: it asks me every time ;p
[21:19] <usr13> someHuman: xrandr  What does it say?  What options do you get?
[21:19] <someHuman> Jordan_U: How do I connect?
[21:19] <someHuman> usr13: Can't open display.
[21:19] <usr13> someHuman: You did not connect and you did not connect afterwards?
[21:19] <Jordan_U> someHuman: There should be a network manager icon in the top right corner of the screen.
[21:19] <someone12345> You could change your login screen to kdm
[21:20] <someHuman> I know
[21:20] <Beldar> scrubfest, Last I heard the ubuntu repos version was the best to use, you using this one?
[21:20] <someHuman> someone12345: kdm?
[21:20] <someHuman> How do I connect via ttyl?
[21:20] <someHuman> Hopefully I don''t have to reinstall just for connection sake -_-
[21:20] <someone12345> It's a login screen. I don't that issue with kde
[21:20] <someHuman> someone12345: Ah ok
[21:21] <someone12345> sudo apt-get install kdm
[21:21] <usr13> someHuman: You should see the network manager, but if not just do,  iwlist <iface-here> scan  and then iwconfig <iface-here> essid <essid-here>  and then dhclient <iface-here> (using sudo for all those commands).
[21:21] <usr13> someHuman: Probably just do updates first.
[21:21] <usr13> someHuman: sudo apt-get && sudo apt-get upgrade
[21:21] <someHuman> usr13: iface-here?
[21:22] <usr13> someHuman: Yea, the name of it.
[21:22] <scrubfest> Beldar I just did sudo apt-get install skype
[21:22] <someHuman> usr13: I don't see any network manager, I don't have GUIs here atm. Am in ttyl.
[21:22] <usr13> someHuman: like eth0 or eth1 or wlan0 or....
[21:22] <scrubfest> What should I have done?
[21:22] <usr13> someHuman: iwconfig
[21:22] <someHuman> usr13: Huh?
[21:22] <usr13> someHuman: After doing updates, see what you have.
[21:23] <someHuman> Ok'
[21:23] <usr13> someHuman: Get connected to internet. Do updates.  Reboot. See what you have after that.
[21:23] <someHuman> Done with iwconfig
[21:23] <Jordan_U> someHuman: I thought you were just in "low graphics mode", where you still have a GUI but it's  just slow/ low resoltion. Is that not the case?
[21:23] <someHuman> Jordan_U: Nope.
[21:23] <someHuman> I don't have the config. box anymore 'cause I logged in ttyl.
[21:24] <usr13> someHuman: Start over.  Tell us exactly what you have on the screen.
[21:24] <someHuman> Right now I am in ttyl.
[21:24] <Jordan_U> someHuman: What "config. box"?
[21:24] <usr13> someHuman: So you are in console mode?
[21:24] <someHuman> My system is in low graphics mode.
[21:24] <someHuman> usr13: Yes.
[21:24] <usr13> someHuman: Get connected to internet. Do updates.  Reboot. See what you have after that.
[21:24] <Baako> if i wanted to run this ssh in ubntu i have set up a conf file in .ssh do i type this "ssl host" e.g. if the host was like this "Host myhosts"
[21:24] <someHuman> usr13: How do I connect?
[21:25] <bekks> Baako: no.
[21:25] <usr13> someHuman: Connect to internet.  Do:  sudo apt-get && sudo apt-get upgrade
[21:25] <someHuman> I am in ttyl.
[21:25] <someHuman> I can only type stuff for stuff to happen.
[21:25] <someone12345> are you on a laptop?
[21:25] <someHuman> No GUIs.
[21:25] <someHuman> someone12345: Yes
[21:25] <bekks> someHuman: then start to type.
[21:25] <usr13> someHuman: Ok, so you are in console mode.  I got that.
[21:25] <Baako> bekks its something then the hostname e.g. ssl tunnel
[21:25] <bekks> Baako: Thats sounds wrong pretty much.
[21:25] <someHuman> bekks: I don't know what to type.
[21:26] <usr13> someHuman: Scroll up... read.  If you have problems ask question(s).
[21:26] <bekks> someHuman: You've been told multiple times.
[21:26] <Jordan_U> someHuman: What did you mean when you talked about a "config. box"?
[21:26] <Baako> bekks i did something like that but i forgot
[21:26] <usr13> someHuman: Are you logged in?
[21:26] <usr13> someHuman: If not. Login.  Okay?
[21:26] <bekks> Baako: you can create a ssh_config file, but you dont type things like "ssl tunnel" in there.
[21:26] <Johnny_Linux> D`oh!
[21:26] <usr13> someHuman: supply user name, and then password.
[21:27] <someHuman> Jordan_U: You know, after you've been told that your system is running in low-graphics mode. You get this options which to configure.
[21:27] <someHuman> The ones in radio buttons.
[21:27] <Baako> bekks i might in tunnel
[21:27] <someHuman> usr13: I am logged in already.
[21:27] <bekks> Baako: What does that sentence mean?
[21:27] <usr13> someHuman: So what options did you get to configure?
[21:27] <Jordan_U> someHuman: OK. What were those options? ctrl+alt+F7 will probably return you to that dialog.
[21:27] <Baako> bekks will show you a pastebin of my config
[21:28] <someHuman> Wait
[21:28] <someHuman> I'll tell you alphabetically.
[21:28] <usr13> someHuman: iwconfig
[21:28] <scrubfest> I cant move my cursor
[21:28] <someHuman> Run in low-graphics mode for just 1 session
[21:28] <someHuman> Reconfigure graphics
[21:28] <scrubfest> Is there some linux hotkey that disables cursor movement?
[21:28] <someHuman> Troubleshoot the error
[21:28] <someHuman> Exit to console login
[21:28] <scrubfest> Everything works as it should I just cant move my cursor all of a sudden
[21:28] <someHuman> That's it.
[21:28] <Jordan_U> someHuman: Select the first option, to run in low-graphics mode for just 1 session.
[21:29] <someone12345> scrubfest: modprobe -r psmouse &  modprobe psmouse
[21:29] <Baako> bekks http://pastebin.com/VcpVY7k5
[21:29] <someHuman> It doesn't show my cursor.
[21:29] <someHuman> I don't think I can even choose?
[21:29] <usr13> someHuman: In console mode?
[21:29] <bekks> Baako: Thats a stock ssh_config file.
[21:29] <scrubfest> some12345 are those terminal commands?
[21:29] <someHuman> usr13: No, I am in the dialogue box now.
[21:29] <Jordan_U> someHuman: You likely need to use arrow keys to move between options, and enter to continue with your selection.
[21:29] <someHuman> Fomr ttyl I pressed ctrl+alt+f7
[21:29] <usr13> someHuman: So, what are your options?
[21:30] <Baako> bekks how i want to call "tunnel" and the host will start without me having to do all that
[21:30] <someHuman> Neither works.
[21:30] <someone12345> scrubfest: yes, you need sudo assess
[21:30] <usr13> someHuman: Tab key?
[21:30] <someHuman> In cases like this I just restart
[21:30] <someHuman> usr13: Nope
[21:30] <Jordan_U> someHuman: Neither what works?
[21:30] <nuclearbob> o/
[21:30] <scrubfest> I didnt write anything in terminal to disable it
[21:30] <bekks> Baako: "man ssh_config"
[21:30] <scrubfest> so that cant be it
[21:30] <someHuman> Jordan_U: Trying to choose from the options.
[21:30] <someone12345> scrubfest: Are you in gui?
[21:31] <someHuman> usr13: I just restarted.
[21:31] <someone12345> scrubfest: Are you in login?
[21:31] <scrubfest> That command outputted [1] 10914
[21:31] <usr13> someHuman: So go to console mode, get connected to internet, do updates, and see what you have after that.  (May be easiest to connect via cat5 cable.)
[21:31] <Jordan_U> someHuman: So pressing tab multiple times, using the arrow keys multiple times, and pressing "Enter" all don't have any effect on what is displayed on the screen. Correct?
[21:31] <someone12345> scrubfest: sudo modprobe -r psmouse & sudo  modprobe psmouse
[21:31] <someHuman> usr13: Yeah I'll just get the cable lol.
[21:32] <usr13> someHuman: Good.
[21:32] <someHuman> Jordan_U: Yeah, but I just restarted my PC.
[21:32] <usr13> someHuman: Good.
[21:32] <someone12345> scrubfest: do you know what sudo is
[21:32] <scrubfest> No I am logged in. I was just browsing chromium when suddenly I couldn't move my mouse
[21:32] <scrubfest> :P
[21:32] <scrubfest> I can restart that will probably fix it
[21:32] <scrubfest> Right now I am just using hotkeys to open programs and navigating with tab
[21:32] <scrubfest> Its kind of fun
[21:32] <scrubfest> Apparently its super user access?
[21:32] <scrubfest> That's how I've understood it
[21:34] <scrubfest> Does sudo modprobe -r psmouse check for hardware block on cursor?
[21:34] <someone12345> scrubfest: If can get to the termal type sudo modprobe -r psmouse & sudo  modprobe psmouse. It will reload the mouse drivers.
[21:34] <bekks> scrubfest: no.
[21:34] <scrubfest> I wrote both
[21:34] <scrubfest> nothing happened
[21:34] <scrubfest> I think I'll just reboot :)
[21:35] <scrubfest> Oh nvm
[21:35] <scrubfest> now it works
[21:35] <scrubfest> coolio
[21:35] <someone12345> That will work
[21:35] <jhutchins> scrubfest: You very rarely have to actually reboot Linux.
[21:36] <chulis> How can I change the color of my nick in xchat-gnome?
[21:36] <jhutchins> scrubfest: You might, if that hadn't worked, just restart X.
[21:36] <chulis> xchat-gnome 0.3.0
[21:36] <scrubfest> Back to the skype thing though
[21:36] <scrubfest> To install skype I just did
[21:36] <scrubfest> sudo apt-get install skype
[21:37] <scrubfest> Should I have done it some other way?
[21:37] <Baako> bekks what?
[21:37] <Beldar> chulis, https://toxin.jottit.com/xchat_text_events
[21:37] <bekks> Baako: type "man ssh_config" to see a in-depth explanation of how to configure your ssh_config file
[21:38] <Baako> bekks no manual entry
[21:38] <bekks> Baako: So what are you typing then?
[21:39] <Baako> bekks man ssh-config
[21:39] <Baako> bekks dont matter will find out
[21:39] <bekks> Baako: Thats not what I told you to type.
[21:39] <bekks> Baako: I told you to type: "man ssh_config". Not the underscore, which is not a minus.
[21:39] <bekks> *Note
[21:41] <chulis> Beldar: its for all versions?
[21:42] <hroi> hi!
[21:42] <Beldar> chulis, Who knows, probably not is my guess, in this area, a gui.
[21:43] <hroi> Im wanting try out xfce on my ubuntu 13.10
[21:44] <ice9> is there a library for ubuntu for geoip service?
[21:44] <Beldar> chulis, I meant without the "not" the same per release.
[21:44] <Beldar> hroi, What is stopping you?
[21:45] <OerHeks> !find geoip
[21:46] <Baako> bekks u r confusing both of use
[21:46] <Baako> us
[21:47] <Beldar> !xfce > hroi
[21:48] <hroi> Beldar,  thanks!
[21:48] <Glycan> Hello, I'm using lubuntu with more or less defaults, keyboard layout switiching doesn't really work properly
[21:48] <bekks> Baako: I am not. The command for the man page of ssh_config is "man ssh_config".
[21:48] <Glycan> I have to go manually open lxkeymap every time I want to switch
[21:48] <hroi> Beldar,  only I've had a slight inkling that xfce conflicts with ubuntu
[21:48] <hroi> Beldar, is that even remotely possible?
[21:48] <hroi> Beldar,  corrupting some library dependencies?
[21:49] <Glycan> There's a "Keyboard Layout Switcher" widget, but it only shows me having one keyboard layout at any given moment
[21:50] <hroi> what would be the most stable "lightweight", non-opengl desktop for ubuntu?
[21:51] <usr13> hroi: They are all stable, take your pick.
[21:51] <Baako> bekks this is what i was looking for "ssh -f -N tunnel"
[21:51] <Glycan> lubuntu is lightweight
[21:52] <Glycan> can anyone help me out?
[21:52] <hroi> usr13,   I get the feeling they are not "as" stable as the ubuntu unity setup - at least on 13.10
[21:52] <hroi> usr13,  I guess it is conceivable that 13.10 distro doesn't wait for anyone
[21:52] <usr13> hroi: I get the feeling they are ;)
[21:53] <Jordan_U> hroi: LXDE and XFCE both get a lot of testing as their are  official Ubuntu flavors for them, Lubuntu and Xubuntu respectively.
[21:53] <ice9> ubuntu GeoIP can be used as service?
[21:53] <usr13> hroi: I use xfce
[21:53] <hroi> Jordan_U,   usr13 ,  ok good to know!
[21:53] <hroi> so long as i dont try anything funny, like installing chinese support --- right :)
[21:54] <usr13> hroi: (I consider xfce to be most user-friendly, easily configurable and feature-rich.)
[21:54] <hroi> usr13,  and xfce is 100% framebuffer right?
[21:54] <Glycan> guys?
[21:55] <usr13> hroi: But the choice is yours, just try one then another until you find one *you* like.
[21:55] <Beldar> hroi, xfce=less gui more configs
[21:55] <bekks> Glycan: We are still waiting for your support question :)
[21:55] <usr13> hroi: xfce is best (in my opinion).
[21:55] <hroi> oh, I see that 13.10 xubuntu xfce is Xfce4
[21:56] <usr13> hroi: You are correct.
[21:56] <Glycan> bekks: I would like to be able to switch keyboard layouts with a shortcut.
[21:56] <hroi> usr13, Beldar :  my main concern is opengl -- I dont want any fancy graphics card stuff :)
[21:56] <Glycan> I can't; it shows me having as one keyboard layout at a time, I have to go open lxkeymap every time I want to type accents
[21:56] <hroi> usr13, Beldar :  reason being I run a lot of stuff on my gpu
[21:57] <bekks> Glycan: Then define a hotkey for it. http://askubuntu.com/questions/94902/how-can-i-switch-between-keyboard-layouts-by-pressing-a-keyboard-shortcut-like-o
[21:57] <hroi> usr13, Beldar :    gpu interupts do horrible things to my desktop performance
[21:57] <Beldar> hroi, There are even lighter de, but starting with xfce is as good as any. ;)
[21:57] <Glycan> bekks: I cannot add another language
[21:57] <usr13> hroi: Maybe you need more system resources for what you do?
[21:57] <bekks> Glycan: why not?
[21:58] <hroi> usr13,  basically in the past I have found that light weight desktops dont get bothered so much by my gpu load
[21:58] <Glycan> It doesn't work. Hang on, I'll go try to do it again and tell you what exactly happens.
[21:59] <hroi> usr13, Beldar :   I guess because they dont use opengl ,   or didnt used to
[21:59] <hroi> usr13, Beldar :   unity is pura opengl I think
[21:59] <Glycan> Well, for starts, I don't have a system settings menu.
[21:59] <Glycan> starters*
[21:59] <bekks> Glycan: it isnt a menu, it is a starter button on the left.
[22:00] <Glycan> (I am using Lubuntu)
[22:00] <usr13> Glycan: Maybe you would like xfce better.
[22:00] <Glycan> not really, I've used xfce before
[22:00] <bekks> Glycan: even xfce has system settings :)
[22:00] <usr13> Glycan: Ok
[22:01] <Glycan> and I have other things I want to do this next couple of days than figuring out why my new OS doesn't work
[22:01] <Glycan> these*
[22:01] <Glycan> I have system tools and preferences
[22:01] <bekks> Glycan: Define "doesnt work" please.
[22:01] <Glycan> bekks: what, you've had new installs work exactly the way you want them to, immediatly?
[22:01] <bekks> Glycan: Yes.
[22:02] <bekks> Glycan: Thats what I expect from a new install, honestly.
[22:02] <ice9> what package does config.h belongs to?
[22:02] <Glycan> well, I mean, not work in general
[22:02] <bekks> Glycan: "doesnt work, in general" is to generic to actually fix it.
[22:02] <bekks> ice9: you can look it up on packages.ubuntu.com
[22:03] <Glycan> I suppose I should say, "figuring out where and how to configure everything so it works the way I want it too, and then figure out fix <problem XYZ> that will inevitably arise"
[22:03] <Glycan> but that doesn't anything to do with the problem at hadn
[22:03] <Glycan> hand*
[22:03] <Glycan> My root menu has system tools and preferecnes
[22:03] <Glycan> preferences*
[22:05] <idiot_> Glycan, does this help you http://wiki.lxde.org/en/Change_keyboard_layouts
[22:06] <trism> ice9: what are you building? usually config.h is generated from the configure script in the source
[22:07] <Glycan> [huh, something with my wifi...]
[22:07] <Glycan> oh, cool, this works! "echo '@setxkbmap -option grp:alt_shift_toggle "us,il"' | sudo tee -a /etc/xdg/lxsession/Lubuntu/autostart"
[22:07] <ice9> trism: an app that uses geo and geoclue and dbus
[22:07] <idiot_> Glycan, btw: type lxkeymap to open the Keyboard-layout-options, if you can't find it in the menu
[22:08] <Glycan> I know, but I have to do that every time
[22:08] <jhutchins> Glycan: One trick is to learn to use the default configuration rather than spending a lot of time customizing it.
[22:08] <Glycan> (had, this new thing works)
[22:09] <jhutchins> Glycan: If your customizations are limited and relatively simple, it's easier to deal with a new install.
[22:09] <Glycan> jhutchins: that basically defeats the point of using linux
[22:09] <Glycan> (imho)
[22:10] <idiot_> Glycan, Why? If you have to configure that much, you have to use another distro. That's the reason for distributions btw.
[22:11] <Glycan> huh
[22:11] <Glycan> I've never been able to find a distro that satisfies me properly
[22:12] <bekks> Glycan: So find the distro where you waste the least time with configuring it.
[22:13] <Glycan> huh
[22:16] <hayer> Anyone know of a commandline tool to convert a .iso of a movie to a mkv?
[22:17] <bekks> there is none.
[22:17] <hayer> bekks: well, I doubt that.
[22:17] <bekks> an .iso is a data container. you have to extract the actual movie data out of it, and then convert your movie.
[22:18] <hayer> same shit, different wrapping ;)
[22:18] <hroi> ok definately nothing wrong with doing   apt-get install lubuntu-desktop xfce-desktop in one go?
[22:18] <hayer> hroi: no. gn
[22:19] <quantanamera> hello back :) do you recommend to switch from 12.04. to 14.04. ?
[22:19] <quantanamera> presuming some have been using 14.04. already
[22:19] <usr13> *you*?
[22:20] <usr13> quantanamera: I don't....
[22:20] <usr13> quantanamera: Not yet anyway....
[22:20] <jhutchins> quantanamera: How important is the system?  Just for fun or production?
[22:20] <usr13> quantanamera: but that is my opinion.
[22:21] <quantanamera> jhutchins, yes, I do some productive work
[22:21] <jhutchins> Glycan: No, it doesn't defeat my reason for using linux.  I use it because it works best for what I need.
[22:21] <jhutchins> Glycan: I've also literally built hundreds of linux systems.
[22:21] <quantanamera> usr13, why do you think so?
[22:22] <jhutchins> quantanamera: Then I would stick with 12.04 for a while.  14.04 should be done later this month but it's not quite done yet.
[22:22] <jhutchins> quantanamera: In particular there are problems with the installer (possibly limited to efi installs but still).
[22:22] <quantanamera> jhutchins, so you mean it just isnt ready yet, but once it's ready, better to switch?
[22:22] <vaskozl> Hey I'm using an ubuntu laptop as a server
[22:22] <vaskozl> i'm reading http://askubuntu.com/questions/360615/ubuntu-server-13-10-now-goes-to-sleep-when-closing-laptop-lid
[22:22] <jhutchins> quantanamera: There are also the usual video and network odities.
[22:23] <vaskozl> and I want to make it so that when unpluged and lid is closed laptop goes to sleep
[22:23] <vaskozl> but when power is plugged and lid is closed computer doesn't sleep
[22:23] <vaskozl> that's possible trough the gui, but I don't have that as such
[22:23] <usr13> quantanamera: 12.04's EOL is 2017
[22:24] <usr13> quantanamera: We have lots of time....
[22:24] <usr13> If it isn't broke, don't fix it.
[22:25] <quantanamera> usr13, that's true, but just wondering if upgrading would bring advantage in any way.
[22:25] <vaskozl> can anyone help me?
[22:26] <quantanamera> usr13, you mean, in other words, never interfere with a working system.
[22:28] <vaskozl> is there no way to achieve this?
[22:29] <lborda> hi, do you know how to disable precise-updates through preseed ?
[22:32] <jui_> hello
[22:32] <kupo_> do you need archive manager installed if you have 7zip etc installed
[22:33] <meway> hello jui_
[22:33] <hroi> anyone know if  jwm, openbox or fluxbox   come with a nice preconfiguration on ubuntu?
[22:34] <didier_> hi...
[22:34] <didier_> my name didier
[22:34] <didier_> I am ubuntu 14.04
[22:34] <usr13> quantanamera: Read the release notes.
[22:35] <k1l> didier_: 14.04 is not released and support is in #ubuntu+1 untill then
[22:35] <phantomcircuit> im trying to install mesa dri i386 libs
[22:35] <phantomcircuit> on 13.10 with nouveau
[22:35] <phantomcircuit> but it keeps failing with unmet dependencies
[22:35] <phantomcircuit> http://pastebin.com/raw.php?i=EJ1igpbJ
[22:35] <phantomcircuit> it's checked for held packages but there aren't any
[22:36] <quantanamera> usr13, yes, before I consider upgrading, sure I will
[22:42] <honey> hello
[22:43] <trism> phantomcircuit: what is: apt-cache policy libgl1-mesa-dri:i386 libdrm-intel1:i386 libdrm-nouveau2:i386 libdrm-radeon1:i386 libdrm2:i386
[22:44] <phantomcircuit> trism, http://pastebin.com/raw.php?i=4TKN1wB8
[22:44] <ahoneybun> yo honey lol
[22:45] <honey> lol wth.
[22:46] <honey> whats the easiest way to convert .flac to mp3
[22:46] <hroi> mencoder?    ffmpeg?
[22:47] <trism> phantomcircuit: that all looks fine, you are going to have to try installing each of the libdrm packages to see why they fail
[22:48] <phantomcircuit> trism, libdrm2:i386 http://pastebin.com/raw.php?i=vy7AR8Sr
[22:48] <usr13> someHuman: Done yet?
[22:50] <scrubfest> How can I make ubuntu not lock my desktop whenever it stand unused for a fixed amount of time
[22:51] <kupo_> screenlocker and power settings
[22:51] <scrubfest> Where do I find screenlocker?
[22:51] <kupo_> just go to screensaver and power settings
[22:51] <kupo_> i think screenlocker is 14.04
[22:52] <trism> phantomcircuit: wow I have no idea what is going on there
[22:52] <phantomcircuit> trism, yeah it's got me pretty confused also
[22:54] <_gentle_giant> How many ways to start a deamon servcie ? sudo service <service> start, start <service>, any other way ?
[22:56] <jareddlc> hey guys
[22:57] <jareddlc> sudo: unable to resolve host <hostname>
[22:57] <jareddlc> start: Job failed to start
[22:58] <Ivis> Hello, i got this when i run optirun firefox - GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size
[23:02] <afflicto> Hey all, I'm doing some streaming on twitch. There is a way to create a virtual sound channel and route my mic and speaker output to it using pulseaudio, but I'm not sure where to look. Any pointers?
[23:10] <quantanamera> usr13, jhutchins, thank you for your insights!
[23:10] <minimec> afflicto: Take this as a start. You have to create a 'null-sink' and 'loopback' the devices you want to merge to that 'null-sink'... http://askubuntu.com/questions/257992/how-can-i-use-pulseaudio-virtual-audio-streams-to-play-music-over-skype
[23:10] <quantanamera> good night/day !
[23:11] <scuzzy123123> hi there
[23:11] <scuzzy123123> i'm having a really annoying issue
[23:11] <scuzzy123123> when i open my sound settings, this happens: http://imgur.com/4C2YeFu
[23:12] <bekks> scuzzy123123: close your chromium tabs then :)
[23:12] <scuzzy123123> the window extends waaaay below my screen, i think because it populates the list under "applications"
[23:12] <scuzzy123123> i'm not trying to use the applications tab though
[23:12] <scuzzy123123> i just want to change the volume on a specific device
[23:13] <bekks> scuzzy123123: So close your chromium tabs.
[23:13] <scuzzy123123> besides, why would it EVER be a good idea to extend the window below the screen
[23:13] <scuzzy123123> i'm not looking for advice on my workflow, just a way to force change the window size
[23:17] <Slart> scuzzy123123: I can't change the window size for that window on my system.. even though it fits on screen.. perhaps it's configured to be not-resizable?
[23:17] <scuzzy123123> Slart: yeah, i found this https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/908650
[23:17] <bekks> scuzzy123123: the way to change the window size: close the chromium tabs, so the window will not extend the screen border.
[23:17] <Slart> scuzzy123123: I can't change the window size of any of the settings windows =/
[23:18] <scuzzy123123> which makes me think they some how decided to make the window size fixed and not resizeable
[23:18] <scuzzy123123> bekks: you're not really being helpful
[23:19] <scuzzy123123> i can have 20 tabs open if i want
[23:19] <bekks> scuzzy123123: the window size is determined by the number of items in the list. If you want to ignore that fact, ignore it.
[23:19] <Slart> scuzzy123123: sounds like extremely bad programming/design.. if you check the pulseaudio volume control it has a scroll bar to the right
[23:20] <Slart> scuzzy123123: not really sure how to help you further besides voting on that bug
[23:21] <Slart> scuzzy123123: and that bug is from 2012.. don't think they're going to change it now.. but who knows
[23:21] <scuzzy123123> Slart: I think the bug report is for 11.10, which tells you how long this has been there
[23:21] <afflicto> minimec: thanks, I actually found a youtube video tho and got it sorted :D
[23:21] <scuzzy123123> Slart: yeah, lol
[23:22] <scuzzy123123> Slart: I appreciate you looking into it though, good to know I'm not the only one who finds this "design decision" to be crazy and nonsensical
[23:23] <Slart> scuzzy123123: I'm running gnome shell at the moment.. bad design choices don't really upset me any more.. there are so many of them
[23:24] <scrubfest> Is there a CTRL+ALT+DELETE equivalent in ubuntu?
[23:24] <Slart> scuzzy123123: but we're drifting offtopic.. I hope they fix this somehow.. I'm going to vote for the bug..
[23:24] <Slart> scrubfest: what are you looking to do?
[23:24] <scrubfest> Terminate process
[23:24] <scrubfest> allocate CPU
[23:24] <scrubfest> memory
[23:25] <scrubfest> stuff like that
[23:25] <minimec> scrubfest: Well... some kind of... http://blog.kember.net/articles/reisub-the-gentle-linux-restart/
[23:25] <Slart> scrubfest: there is a REISUB.. and ctrl+backspace (if enabled)
[23:25] <usr13> Slart: If you are running a DE that you think is not designed properly, why don't you switch to another?
[23:25] <scrubfest> I am having trouble with windows going dark
[23:25] <Slart> scrubfest: well.. you can always drop to a tty.. ctrl+alt+f1 should do that.. (note!! alt+F7 to get back)
[23:25] <scrubfest> Trying to  turn off the Lock after 10min
[23:25] <scrubfest> And I go into the windows that manages it
[23:25] <scrubfest> Turn the option off
[23:25] <scrubfest> and X it
[23:26] <scrubfest> and it just stops working
[23:26] <scrubfest> and I have to force quit it
[23:26] <scrubfest> and the changes are discarded
[23:26] <scrubfest> happens every time
[23:26] <Slart> usr13: I've tried several.. gnome seems to be the lesser evil at the moment.. although they are working their way down =)
[23:27] <srx20022> hello
[23:27] <scrubfest> What is tty?
[23:27] <scrubfest> Prompted me with ubuntu login, not sure what to do there
[23:27] <Slart> scrubfest: a terminal
[23:27] <srx20022> have a quick question,  about xbmc and saucy
[23:28] <Slart> scrubfest: type in your username and password
[23:28] <Slart> scrubfest: then you get a terminal prompt... and from there you can kill processes or whatever
[23:28] <srx20022> trying to run XBMC on 13.10, however as soon as I run the hub wizard, xbmc crashes
[23:29] <__dan__> any filesystem junkies here? wondering what the state of btrfs / zfs on linux is with 14.04
[23:29] <__dan__> im running freebsd 9.1 atm and looking at replacing with 14.04
[23:29] <scrubfest> What do you call it when windows go dark and you cant use them?
[23:30] <bekks> scrubfest: "they are unresponsive"
[23:30] <scrubfest> kk
[23:30] <scrubfest> Is it a common problem that windows go unresponsive frequently? Like... every 2 minutes
[23:30] <scrubfest> :-/
[23:30] <Slart> scrubfest: you could try running the application from a terminal.. see if you get any errors when it dies
[23:30] <ice9> ubuntu geoip can be used as service?
[23:31] <Slart> scrubfest: nope.. not really a common thing.. at  least not on the systems I run into
[23:31] <bekks> ice9: ?
[23:31] <scrubfest> This computer is really bad. It's probably that.
[23:31] <scrubfest> It has... single core 1.3 ghz CPU
[23:32] <ice9> bekks: geoip.ubuntu.com/lookup
[23:32] <ice9> bekks: can be used to send IP forexample and get info about it?
[23:33] <bekks> ice9: I strongly doubt that
[23:34] <bekks> ice9: you can use "geoiplookup" which is in the package "geoip-bin"
[23:42] <whoever> hi all
[23:42] <whoever> I am runing 12.10 and have a usb 3 port need help testing, can someone assist, i can't tell if it is fuctioning as it should
[23:43] <daftykins> plug something in, does it work?
[23:43] <whoever> if i plug a usb 3.0 cable in to it and the othere end into a wall adapter, shouldn't the battery of the notebook charge
[23:44] <whoever> ie : show the charging status on the battery icon
[23:44] <bekks> whoever: No.
[23:44] <whoever> bekks: why not
[23:44] <Ivis> Hi
[23:44] <bekks> whoever: From what you told us, I get that you have a 3 port USB hub, right?
[23:45] <Ivis> i have asus laptop with hybrid video card and when i run lspci | grep VGA i see only one intel card
[23:45] <whoever> be i contacted the manufacture and they said if it is usb 3 and you plug one cable to wall adapter and the other to the usb 3 port it should charge, without a special config
[23:45] <whoever> bekks: no usb 3.0 port
[23:46] <Maluku> when will hibrid AMD grafics work?
[23:46] <whoever> bekks: and that I am tring to charge my notebook via that port vsa the standart wall plug
[23:46] <bekks> whoever: so if you have a notebook, it should charge the battery whenever you plug in a cable into the power connector.
[23:46] <whoever> since the usb 3.0 standart supports charging
[23:46] <bekks> whoever: and you cant charge your laptop with your builtin usb3 port.
[23:46] <__dan__> whoever: 12.10 is quite old, dont think you're getting security updates anymore :/ and usb 3 they changed the way power works
[23:46] <Runemoro> Hi, could anyone help me?
[23:47] <bekks> whoever: Unless you have a perpetuum mobile.
[23:47] <__dan__> whoever: so maybe you could try a 14.04 live cd and see if that's any better?
[23:47] <littlegirl> whoever: You can charge other things with the USB port - like if you were to plug a camera into it, for instance, your laptop would charge the camera - but not the other way aroumd.
[23:48] <littlegirl> *around
[23:48] <minimec> !ask > Runemoro
[23:49] <qin> whoever: What laptop is it?
[23:49] <whoever> bekks: how i understand it if if the notebook has a usb 3.0 connector, as long as one end is connected to a power source, and the other to the usb3.0 port, the laptop should charge
[23:50] <bekks> whoever: That is not true.
[23:50] <whoever> qin: hold on i'll find you a link
[23:50] <Runemoro> minimex, I recently set up a DNS server (bind9) on my ubuntu server, but it's not working properly
[23:50] <whoever> bekks: basterds lied then at acer
[23:50] <bekks> whoever: you cannot charge your laptop with your builtin usb3 port.
[23:51] <bekks> whoever: I stringly doubt they told you you could actually do that.
[23:51] <bekks> *strongly
[23:51] <littlegirl> whoever: That is true of a USB device. If I have a USB camera and my USB cord is plugged into a connector that is plugged into the wall, my camera will charge. However, your laptop is not a USB devide. It's a laptop with a USB port. It's a bit of a different creature. (:
[23:51] <minimec> Runemoro: Well I cannot really help you there. This is not my topic, sorry. ;)
[23:51] <daftykins> obviously some wires were crossed when you phoned in
[23:51] <qin> whoever: year ago it was introduced, but did not see any product yet.
[23:51] <whoever> qin: http://www.amazon.com/gp/product/B00BBIN2G4/ref=oh_details_o03_s00_i00?ie=UTF8&psc=1
[23:52] <Runemoro> Whenever I do dig @199.127.226.65 (my server's IP) rebornlegend.tk, I get the correct response, but doing "dig rebornlegend.tk" doesn't return anything. I've checked with whois that the DNS server name is correctly set up
[23:53] <Dbugger> Hi guys. I have a problem with "sendmail". It is a little long to explain, so I put it here: http://askubuntu.com/questions/447795/configuring-sendmail-in-12-04-server
[23:53] <ETtheGreen> How come Ubuntu escape the massive backdooring which Debian, *BSD, RH, openSUSE could not avoid getting?
[23:53] <littlegirl> whoever: Huh: "PORTS : 1 USB 3.0 (with Sleep and Charge)" - you might be right and the thing might actually be able to charge via its USB port. (:
[23:54] <bekks> Dbugger: I suggest uninstalling sendmail and using a more userfriendly MTA. All MTA packages will ship a "sendmail" binary.
[23:54] <whoever> so now i am confused why they lable PORTS : 1 USB 3.0 (with Sleep and Charge)
[23:54] <daftykins> whoever: it charges the DEVICE you plug in
[23:54] <Dbugger> bekks, do you have something in Mind?
[23:54] <bekks> Dbugger: postfix or exim4
[23:54] <Dbugger> I need something that works well with php out of the box
[23:55] <bekks> Dbugger: every MTA does.
[23:55] <littlegirl> whoever: http://www.toshiba.com/us/sleep-and-charge
[23:55] <Dbugger> Could you maybe ref me a tutorial or something?
[23:55] <whoever> daftykins: but usb 2 and 1 do that why would they label 3.0 as chargeing then
[23:55] <littlegirl> whoever: It can charge your devices while it is sleeping, so you can put the laptop to sleep and it can still charge something. That's what it means.
[23:55] <ETtheGreen> Or is Ubuntu backdoored as well?
[23:56] <bekks> Dbugger: https://help.ubuntu.com/community/Postfix
[23:56] <bekks> ETtheGreen: Which backdooring?
[23:56] <minimec> Runemoro: There is a #ubuntu-server irc channel. Maybe the people there know more about your topic/problem.
[23:56] <ETtheGreen> bekks: NSA backdooring
[23:56] <whoever> littlegirl: damn it, .. so its sleep
[23:56] <Runemoro> thank you
[23:56] <littlegirl> whoever: Yeah, sorry about that. Do you have a regular power cord for it?
[23:56] <Dbugger> bekks, I will try. To remove sendmail, should I apt-get purge sendmail?
[23:56] <whoever> littlegirl: damn it, .. so its sleep-and-charge  !sleep and charge
[23:57] <qin> whoever: It do not looks like Acer V5 have capabilities to be charged via usb.
[23:57] <bekks> ETtheGreen: Do you actually mean "the openssl bug found recently"?
[23:57] <bekks> Dbugger: yeah
[23:57] <whoever> littlegirl: i do i was just tring to make the weight i carry a few pounds less
[23:57] <littlegirl> whoever: Sorry about that! But at least now you know, and it's still cool that it can charge things while it sleeps. (:
[23:57] <daftykins> whoever: ok, mystery solved, we don't need to have a discussion all around it now
[23:57] <daftykins> this is ubuntu support not the shopping channel
[23:58] <ETtheGreen> bekks: seems there are others besides.
[23:58] <Dbugger> bekks, Im looking through the tutorial, and in the configuration section, it talks stuff about mail servers... I dont have such thing
[23:58] <bekks> ETtheGreen: this channel is about support, not fear, doubt and uncertainty.
[23:58] <srock> ubuntus backdoor has a password
[23:59] <bekks> Dbugger: you do. when you install sendmail, postfix whatever to send mails with your php, you have a mailserver.
[23:59] <bekks> srock: key auth based ;)
[23:59] <whoever> daftykins: ya, thx guy , and for what its worth that is a verry crappy labeling, since you can have your hardrive and whole pc go to sleep and still charge the  whatever is plugged in
[23:59] <littlegirl> whoever: Agreed on the labeling. (:
[23:59] <Dbugger> bekks, but can I use whatever I want, for example, for step 3 of configuration?