=== runnermp is now known as runnermp_
=== Ursinha is now known as Ursinha-afk
=== runnermp_ is now known as runnermp
=== Ursinha-afk is now known as Ursinha
[04:04] <nestle19> i installed ubuntu server 13.10 on this dedicated server with raid1 (2x 2TB) and when it first installed, it was doing a raid resync or something in /proc/mdstat (software raid).. i let it finish to 100%.. once it was no longer doing any sync i began using the server. Now randomly a week ago it started resyncing again.. I've been told this can be normal? so my question is.. it says [=========>...........] check = 47.3% (920534400/1945569088) finish=
[04:08] <andol> nestle19: /etc/cron.d/mdadm
[04:09] <andol> Assuming that applies
[04:14] <nestle19> there is a file there yes
[04:15] <nestle19> so shoul di disable that ?
[04:15] <nestle19> i mean i dont mind checking but, this is 800gb worth of data on there..
[04:15] <nestle19> so what if i wanted to reboot.. i feel like i cant
[04:16] <nestle19> i mean its a server so its not meant to be rebooted necessarily but i just feel like its taking a long long time just to do this so i dont konw if itsnormal or what
[06:27] <hxm> where is htpasswd command?
[06:27] <hxm> i installed apache2-dbg
[06:27] <sarnold> hxm: apache2-utils
[06:27] <hxm> ah, ah, thanks
[06:27] <hxm> apt-file confused me
[06:37] <morph__> anyoen know how I can safely back up my server
[06:38] <morph__> i dont havea nother server to put it to
[06:38] <morph__> so if gure id have to put it in a tar or omething
[06:39] <sarnold> morph__: take a look at tarsnap, amazon glacier, amazon s3, rsnapshot, rsync, duplicity, syncthing... there's a lot of options, perhaps too many, but hopefully among those you can find something that works for you
[06:40] <morph__> yea ive never done this
[06:50] <andol> morph__: What sarthor said :) +1 for tarsnap or for duplicity against either S3 or rsync.net.
[06:50] <andol> morph__: Oh, and since you are new to this, also remember to early try verify that you actually can restore the files you think you have backuped up.
=== teran_ is now known as teran
[07:10] <lordievader> Good morning.
=== RaptorJesus is now known as TheMoon
=== TheMoon is now known as DogeRocket
=== DogeRocket is now known as RaptorJesus
=== smb` is now known as smb
[08:39] <Tazmain> Hi all I am new to the whole firewall setup on ubuntu. Is the only way to setup a firewall through iptables ?
[08:43] <cfhowlett> !ufw | Tazmain
[08:43] <ubottu> Tazmain: Ubuntu, like any other Linux distribution, has built-in firewall capabilities. The firewall is managed using the 'ufw' command - see https://help.ubuntu.com/community/UFW | GUI frontends such as Gufw also exist. | An alternative to ufw is the 'iptables' command - See https://help.ubuntu.com/community/IptablesHowTo
[08:43] <cfhowlett> !firewall
[08:44] <Tazmain> cfhowlett, thank you
[08:56] <love23> iam using ubuntu serever and i installed squid3 ans squidGouard  and have already fully configured but squirdguard doesnt  block unwanted site from blacklist dtaabse is  any one who can help me thnks?
[08:58] <love23> I installed squid and squidguard.   I enabled them and they are running.   I enabled the blacklist for squidguard and pasted in http://www.shallalist.de/Downloads/shallalist.tar.gz and downlaoded the blacklist.   Looked like it downloaded and updated the db properly.   I clicked apply and save for squidguard.     However when I try to go to some bad sites (for example using URLs from within that downlaoded file) they still work 
[09:30] <lkthomas> hey guys
[09:30] <lkthomas> I am trying to use module-assistant
[09:30] <lkthomas> but it keep saying kernel headers could not be found
[09:30] <lkthomas> I did m-a prepare and all are fine
[09:46] <ciastek> ubuntu 14.04, proftpd's logrotate script is broken. it makes proftpd to shutdown instead of restart.
[10:04] <ciastek> service proftpd restart -> works fine; invoke-rc.d proftpd restart - server doesn't work anymore.
[10:07] <Tazmain> If I start a vncserver on my server and I have xubuntu-desktop installed and I just get a grey screen when I connect what does that indicate ?
[10:08] <InFierno> Tazmain, Something isnt working?
[10:08] <InFierno> Tazmain, It indicates there may be a configuration problem?
[10:13] <Tazmain> InFierno, I mean is my xstart the session incorrect or is the vncserver not working or the desktop session not functioning
[10:14] <InFierno> I know mate; as to that I dont actually know - I tend to command line in - Did you turn off encryption to start with?
[10:16] <Tazmain> turn of what encryption ? I am not tunneling it through ssh
[10:36] <ciastek> proftpd's bug already confirmed: https://bugs.launchpad.net/ubuntu/+source/proftpd-dfsg/+bug/1246245
[10:36] <uvirtbot> Launchpad bug 1246245 in proftpd-dfsg "proftpd service failed to restart" [Undecided,Confirmed]
[10:55] <samiux> I am running ubuntu 14.04 server, the apparmor's aa-genprof will crash when select scan.  meanwhile, the aa-logprof takes several hours not complete.  any idea?
[11:31] <Jonny86> guys, does anyone know what to do to fix limited plantar flexion motion of left ankle ?
[11:32] <cfhowlett>  Jonny86 wrong channel.
[11:32] <Jonny86> are you sure?
[11:33] <Jonny86> i thought i was in the right place
[11:33] <cfhowlett> Jonny86 so NOT funny.  read the topic.  play somewhere else.
[11:33] <cfhowlett> Jonny86 if you truly thought this was the place for medical help, you have issues.
[11:33] <Jonny86> omg
[11:34] <Jonny86> i was sure someone would come up with a fix
[11:34] <cfhowlett> Jonny86 go away now.
[11:39] <Jonny86> cfhowlett do you think i might get better support in the android-dev channel ?
[11:39] <Jonny86> i'm afraid they might kick me before i ask
[11:40] <cfhowlett> Jonny86 they won't.  just explain that in addition to your ankle problem, you suffer from terminal cranial-rectal inversion.  They'll understand.
[11:41] <Jonny86> lmfaootf thanks for the laugh cfhowlett
[11:41] <Jonny86> you just made my day
[11:41] <Jonny86> i'm no freakin bored at work
[11:42] <Jonny86> hell is real
[11:44] <dw1> ciastek: add this "sleep 2" line to /etc/init.d/proftpd -- fixed it for me: https://pastee.org/dd7cx
[11:44] <Jonny86> dw1 what about my issue?
[11:47] <dw1> ciastek: found the fix here https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675081#10
[11:47] <uvirtbot> Debian bug 675081 in proftpd-basic "proftpd-basic: logrotate kills proftpd instead of restarting it" [Important,Fixed]
[11:48] <Jonny86> omg
[11:48] <Jonny86> are you guys discussing string theory
[11:49] <Jonny86> Debian bug 675081 = is that what you call the 6th dimension
[11:49] <uvirtbot> Debian bug 675081 in proftpd-basic "proftpd-basic: logrotate kills proftpd instead of restarting it" [Important,Fixed] http://bugs.debian.org/675081
[11:50] <dw1> ciastek: ahh thers a better solution at the bug link you provided. nice :)
[11:51] <Jonny86> ok
[11:51] <Jonny86> i opologize
[11:57] <love21> I installed squid and squidguard.   I enabled them and they are running.   I enabled the blacklist for squidguard and pasted in http://www.shallalist.de/Downloads/shallalist.tar.gz and downlaoded the blacklist.   Looked like it downloaded and updated the db properly.   I clicked apply and save for squidguard.     However when I try to go to some bad sites (for example using URLs from within that downlaoded file) they still work 
=== mjohnson15 is now known as mjohnson
=== mjohnson is now known as mjohnson15
=== psivaa is now known as psivaa-afk
[12:09] <dw1> hmm, dont know. try in #squid too
[12:13] <love21> I installed squid and squidguard.   I enabled them and they are running.   I enabled the blacklist for squidguard and pasted in http://www.shallalist.de/Downloads/shallalist.tar.gz and downlaoded the blacklist.   Looked like it downloaded and updated the db properly.   I clicked apply and save for squidguard.     However when I try to go to some bad sites (for example using URLs from within that downlaoded file) they still work 
[12:22] <Tazmain> will export VAR=myvar set a global environment variable or just local variable to the user?
[12:24] <pmatulis> love21: maybe check in #squid
[12:25] <pmatulis> Tazmain: try it and tell us
[12:30] <Tazmain> pmatulis, well seems to be global until reboot
[12:31] <Tazmain> who else do you set a global environment var, in /etc/environment ?
[12:31] <Tazmain> how *
=== med_ is now known as Guest50247
[12:58] <jdstrand> samiux: can you file bugs with steps to reproduce? we plan on fixing these sorts of bugs in the coming weekesz
[12:58] <jdstrand> weeks*
=== medberry is now known as Guest46004
=== Guest46004 is now known as med__
[13:16] <med__> smoser, is 255 a real firm limitation in metadata (being discussed in the Nova room 303 a few moments ago) proposal about to extend it
[13:27] <samiux> jdstrand, I cannot find a open a bug report at launchpad.net
[13:28] <jdstrand> samiux: https://bugs.launchpad.net/ubuntu/+source/apparmor/+filebug
[13:29] <samiux> k
=== psivaa-afk is now known as psivaa
[14:11] <smoser> med__, metadata on nova ?
[14:11] <smoser> i have no idea. not listening :).
[14:12] <med__> smoser, no worries. It was the previous session
[14:13] <smoser> ah.
[14:24] <Kawaiola> Anyone know how to make changes to the php configuration files by chance?
[14:26] <Armadillos> Kawaiola: They usually reside in /etc/php4 directory.  There's a config for the CLI, and one for the web.
[14:27] <Armadillos> Kawaiola: Or /etc/php5/
[14:30] <Kawaiola> Armadillos, Okay sweet thank you would you happen to know where I would get the download for the latest version of vtiger 6 I can't seem to find the download location anywhere
[14:35] <Armadillos> Kawaiola: That I do not know :(
[14:37] <Kawaiola> Armadillos, no worries haha just having a hard time setting this up unfortunetly and the vtiger channel has like 4 people who aren't even there
[14:38] <shwaiil> Hi
[14:38] <shwaiil> Q: a sudoer in ubuntu is wheel, right ? why isn't that created by default ? Thanks!
[14:38] <shwaiil> I just runned: groups, I only get root
[14:39] <jpds> shwaiil: It's 'sudo', not wheel.
[14:40] <shwaiil> jpds: Thanks for looking!
[14:40] <Pici> or 'admin' in older releases.
[14:43] <shwaiil> Ok, to see the groups less /etc/group ?
[14:44] <InFierno> Guys, If I make a subdomain that is served through nginx via and apache reverse proxy - I only need a CNAME record right?
=== racedo_ is now known as racedo
=== medberry is now known as Guest68105
[15:26] <Kawaiola> Where do files go by defult when you download them ?
[15:31] <rbasak> Kawaiola: download them how?
[15:31] <Kawaiola> rbasak, I used wget
[15:31] <rbasak> Kawaiola: wget will put files in the current directory, unless you're using some particular options that change that.
[15:32] <Kawaiola> rbasak, but I can't unpack the files because I'm not real sure where they are haha
[15:32] <Kawaiola> Oh so if I was in my main directory that is hwere they would be.
[15:45] <Kawaiola> rbasak, How would I find a file, for example I need to find  vtigercrm6.0.0.tar.gz on my server so I can upack it
=== medberry is now known as Guest64654
=== Guest64654 is now known as med__
=== runnermp is now known as runnermp_
=== cultav1x is now known as cultavix
[16:54] <samiux> anyone know how to download the lastest apparmor-utils for ubuntu 14.04
[16:56] <pmatulis> samiux: install the package with apt-get?
[16:56] <jdstrand> I think he wants trunk based on bug feedback
[16:57] <Kawaiola> Hey does anyone know how to change the settings for php
[16:57] <SCHAAP137> change what settings
[16:58] <jdstrand> samiux: we have daily builds of apparmor trunk, but you don't want those since Ubuntu has several Ubuntu-specific patches that you would want. I can say that the work is planned to gather up all those bugs and push them as SRUs to 14.04 this month
[16:59] <samiux> jdstrand, thanks
[16:59] <Kawaiola> I need to turn display_errors off change the max_time_exicution
[16:59] <jdstrand> samiux: if this puts you in a bind, I suggest profiling by hand. see: http://wiki.apparmor.net/index.php/Profiling_by_hand
[16:59] <Kawaiola> I assume they are config settings
[17:04] <samiux> jdstrand, k
[17:09] <esde> Kawaiola: /etc/php/cli/php.ini might be what you're lokoing for
[17:09] <esde> *looking
[17:09] <Kawaiola> esde, okay I will take a look and let you know thank you
[17:10] <Kawaiola> esde, there is nothing in that file when I open it perhaps I'm doing something wrong
[17:12] <esde> php -i | find /i "Configuration File"
[17:12] <esde> run that
[17:13] <esde> erm
[17:13] <esde> php -i | find "Configuration File"
[17:13] <Kawaiola> esde, It came up saying no such file or directory
[17:14] <esde> same here
[17:14] <esde> got it from stackoverflow, let me frind the proper command for you
[17:14] <esde> *find
[17:14] <Kawaiola> esde, thank you I've been trying to figure out how to do this forever
[17:14] <esde> php --ini
[17:14] <esde> there ya go
[17:15] <Kawaiola> esde,  ahh okay I see now how do I open and modify those files?
[17:15] <esde> you'll probably only be changing the php.ini file, but there might be some settings in the additional inis listed
[17:16] <Kawaiola> okay sweet would I open those files with nano ?
[17:17] <esde> display_errors and max_execution_time should both be in php.ini iirc
[17:17] <esde> yeah
[17:35] <Kawaiola> esde, When I change and save settings is there something special I have to do?
[17:35] <esde> they *should* take effect immediately unless you're using like php5-fpm, in which case you'd need to restart the service like sudo service php5-fpm restart
[17:36] <esde> you could also check phpinfo()
[17:37] <Kawaiola> I have php5
[17:42] <samiux> I submitted a bug for apparmor at ubuntu 14.04 server.  the developer requests me to submit backtrace.  How can I do that on a server?
[17:43] <jjohansen> samiux: apport-collect bug#
[17:43] <sarnold> jjohansen: I don't thikn that'll do it
[17:43] <jdstrand> I think it will. there is a cli backend
[17:44] <jjohansen> sarnold: it should, or it used to
[17:44] <sarnold> jdstrand: but are python stack dumps saved anywhere useful? I thought they just went to the terminal and that was that.
[17:44] <jdstrand> but I forget if you need to invoke it specially
[17:44] <jdstrand> python tracebacks should end up in /var/crash too
[17:44] <jjohansen> samiux: you can also always just manually attach the part of the log with the backtrace
[17:45] <jjohansen> if the back trace isn't showing up in the logs the, just copy it, and paste it into the bug
[17:45] <sarnold> jdstrand: really? neat. all I've got in there now are some systemd crashesh, I'd have expected a python stack dump somewhere, as that's the usual python error handling :)
[17:46] <jdstrand> hehe
[17:46] <sarnold> samiux: if apport-collect 1319829  doesn't do it, try: sudo -s <enter> then aa-genprof suricata 2>&1 > /tmp/aa-genprof.out
[17:47] <samiux> sarnold, thanks
[17:47] <jdstrand> I think it depends on if it is an official binary as opposed to some random script. pitti could explain more. I do know that I've seen tracebacks in there
[17:50] <sarnold> hrm, maybe that functionality was dropped somehwere? I just tried again with the 'maas' command line program, nothing new in /var/crash
[18:00] <hans67521> Hi i've install Ubuntu 14.04 LTS as a KVM guest, sudo apt-get update produces 403 forbidden, i've tried changing the sources.list to a different mirror but still getting the same output
[18:00] <hans67521> any ideas?
[18:03] <sarnold> hans67521: can you pastebin your sources.list?
[18:03] <dasjoe> hans67521: pastebin your sources.list, for example on http://paste.ubuntu.com/
[18:04] <sarnold> (the pastebinit program can make that very easy :)
[18:06] <hans67521> http://pastebin.com/uf9UEuST
[18:06] <hans67521> i dont see the sources.list been the issue here, just installed the machine
[18:07] <dasjoe> Are you behind a proxy/firewall of some sorts?
[18:07] <hans67521> Yes, the VM runs behind a shorewall box
[18:08] <hans67521> i can ping out onto the internet, ssh to remote hosts
[18:08] <hans67521> Ah!
[18:08] <dasjoe> Also, I assume you are not in the US but in ZA. Replace us.archive[...] with za.archive[...] for (probably) better downloads.
[18:09] <hans67521> lol i know what is issue is...
[18:09] <hans67521> squid acl...
[18:09] <dasjoe> :)
[18:10] <sarnold> woot
[18:10] <hans67521> lol works now....
[18:10] <hans67521> thanks.
=== veebull is now known as veebull_away
[18:22] <samiux> my ubuntu 14.04 server displays "audit: printk limit exceeded", why?
[18:24] <sarnold> samiux: the short answer is that it looks like e.g. apparmor is generating too many messages too quickly
[18:25] <samiux> sarnold, I see
[18:25] <jjohansen> samiux: the message rate limit is rather low, you can up it or turn it off
[18:25] <sarnold> samiux: the longer answer is that the audit system looks to offload messages from the kernel to the auditd daemon, but to avoid allowing someone to perform a denial of service attack against the machine by logging too many errors at once, it only has a backlog that's so long..
[18:25] <raub> Has anyone seen sudo-ldap crash on 14.04?
[18:26] <jjohansen> samiux: to turn it off, as root do: echo 0 >  /proc/sys/kernel/printk_ratelimit
[18:27] <samiux> jjohansen, thanks
[18:33] <rberg_> Hi folks I have been seeing a lot of this "INFO: rcu_bh detected stall on CPU 1 (t=0 jiffies)" on 12.04 lately I was reading that 0 jiffies means its not a real hang.. does anyone know how to go about debugging this?
=== runnermp_ is now known as runnermp
=== m6 is now known as mklinga
=== mklinga is now known as markour
=== ggherdov_ is now known as ggherdov
[22:06] <Julinux> Hi everyone
=== Ursinha is now known as Ursinha-afk
=== Ursinha-afk is now known as Ursinha
=== broder_ is now known as broder
[23:20] <pmatulis> hello there