[01:20] does any channel have APN support? === TooLmaN_ is now known as ToLmaN === ToLmaN is now known as TooLmaN === chihchun_afk is now known as chihchun === TooLmaN is now known as DaiBot === DaiBot is now known as TooLmaN === chihchun is now known as chihchun_afk === chihchun_afk is now known as chihchun [06:36] hey all [06:36] ahoneybun, hows it going? === chihchun is now known as chihchun_afk [07:21] good morning [07:31] morning === chihchun_afk is now known as chihchun [08:00] popey: you about ? [08:01] popey: when you get time could you confirm this bug, it works fine with me , https://bugs.launchpad.net/ubuntu-calendar-app/+bug/1372254 [08:01] Launchpad bug 1372254 in Ubuntu Calendar App "New Event in Calendar app not scheduled for the correct time zone." [Undecided,New] [08:03] mihir: will take a look... [08:19] mihir, pingers [08:43] hello [08:43] ubuntu touch RTM? [08:44] emulator now usable and developermode working and adb not falling? [08:48] coderus: not tried the emulator for a while. [08:48] * popey fires one up [08:48] Good morning all; happy Monday, and happy Elephant Appreciation Day! :-D [08:50] ogra_: any idea why this happens? alan@deep-thought:~$ sudo ubuntu-emulator create emulator_01 --channel=ubuntu-touch/ubuntu-rtm/14.09 [08:50] Failed to locate latest image information [08:51] sounds like a netwrok issue to me [08:51] ubuntu-touch/utopic-proposed works [08:53] oh, because the emulator was broken at promotion time [08:53] we didnt promote it [08:53] 14.09-proposed should work fine [08:54] ahhh! [08:54] thanks [09:02] coderus: just tested by creating a new emulator like this $ sudo ubuntu-emulator create emulator_01 --channel=ubuntu-touch/utopic-proposed [09:02] dpm: hey [09:02] dpm: can you give a spin to see if it helps? https://code.launchpad.net/~mzanetti/reminders-app/optimize/+merge/235340 [09:02] booted it and have "adb shell" which gets me a phablet@ubuntu-phablet:~$ prompt [09:02] * popey goes afk for a bit [09:03] popey: and it still working after emulator reboot? [09:03] coderus: not tried rebooting it [09:03] will try when I get back, i need to go afk [09:03] main issue was adb settings not saved and adb dead after restarting emulator [09:03] and ubuntu-touch/utopic-proposed [09:04] is it contain rtm too? [09:04] Akiva-Thinkpad: pong [09:04] mihir, hey [09:04] on the timeline time at the side [09:04] the weekview events still block them. [09:04] Akiva-Thinkpad: i have seen your MRs , i'll review them by tonight [09:05] I tried adjusting the z value but that didnt work. [09:05] Do you have any ideas? [09:05] Akiva-Thinkpad: yes , it is known bug..we [09:05] okay then you saw it [09:05] just wondering :P [09:05] Akiva-Thinkpad: we are still thinking on that how are we planning to do that on weekview [09:06] mihir, there was a few suggestions in the reddit thread that I posted [09:06] mainly from google cal [09:06] Akiva-Thinkpad: do you have any idea, was thinking to do opacity on bubble only on Sunday :| , i know that will break the consistency but still need to think [09:06] ok trying myself ubuntu-touch/utopic-proposed now [09:07] mihir, I did not try this, but did you try adjusting the z for the events? [09:07] Akiva-Thinkpad: nope i haven't [09:07] I only tried adjusting the z for the labels [09:07] I don't know where the events come from so I figured you would [09:08] err what component defines the events* [09:09] ahh , that being generates from EventBubble.qml [09:38] zbenjamin_: ogra_: is still /userdata/.writeable_image the file we need to touch to get writable images ? [09:39] nerochiaro: you can use phablet-config [09:39] zbenjamin_: i ask because qtcreator doesn't seem to be able to set the device to writeable anymore [09:40] nerochiaro: thats true unfortunately, since we switched to adb running as phablet [09:40] zbenjamin_: right. i hope these options will be removed soon if they don't work anymore [09:41] nerochiaro: yes [09:41] it's quite confusing [09:41] mzanetti, sorry, just got off the phone. I saw it during the weekend, I'll test it asap. Is this the whole batch of optimizations, or do you have more planned? [09:41] dpm: depends a bit on your verdict :D [09:42] ok, so if things explode == we need more optimizations :) [09:42] if we say its good enough now that's it, otherwise I have to dig some more [09:42] ok, cool [09:42] I hope things don't explode any more [09:42] but there might still be cases where its not smooth [09:42] dpm, mzanetti o/ is changed something in cmake in last days? I'm not able to create any click package for reminders, I have always this error: http://paste.ubuntu.com/8402288/ [09:43] hi [09:44] rpadovani, try to restart Qt Creator [09:44] not sure if it will solve your problem, but I've had this a couple of times when I've created a new chroot [09:44] and restarting qtc fixes it [09:45] sounds like bug 1336649 [09:45] bug 1336649 in qtcreator-plugin-ubuntu "Need to restart Qt Creator after creating a chroot-based kit" [Undecided,New] https://launchpad.net/bugs/1336649 [09:46] dpm, no, and it's strange, because I open the project opening CMakeLists.txt, and in the left sidebar there are only a folder with cmakelist.txt, and nothing elese of the project [09:46] and I didn create a new chroot [09:49] hm [09:50] it seems to work for me, but I'm getting other SDK-related warnings [09:51] rpadovani: apt-get install ubuntu-sdk :) [09:52] lol [09:53] nerochiaro, you (and the SDK) should use phablet-config writable-image [09:53] ogra_: done, and works [09:53] ogra_: thanks [09:53] :) [09:53] rpadovani: well, seems Qt 5 isn't installed properly. [09:54] rpadovani: if that's in the click chroot you might want to recreate it (or go into maintainance mode and fix it manually) [09:54] mzanetti, it worked until last week, and I have an updated workstation with utopic. ubuntu-sdk is already at latest version [09:54] i'll try to check what's wrong with chroot [10:02] rpadovani, it works here, building it now [10:06] zbenjamin_, hi! I'm trying to install Reminders on a device from QtC, and I'm getting these error/warning: any idea how to ignore them and install the click nevertheless from QtC? http://pastebin.ubuntu.com/8402386/ [10:07] dpm_: those errors are ignored by default [10:07] dpm_, seems my chroot is broke: http://paste.ubuntu.com/8402388/ [10:08] zbenjamin_, ah, from the rest of the log it seems to be the case, yes: http://pastebin.ubuntu.com/8402398/ - but still the app does not launch on the device [10:08] dpm_: what do you get in the application output? [10:10] zbenjamin_, I can't seem to find the output, not sure if it's launched at all? [10:10] dpm_: shortcut for the output is ALT+3 [10:11] zbenjamin_, ah, gotcha: [10:11] Sdk-Launcher> Executing: /tmp/com.ubuntu.reminders_0.5.latest_armhf.click [10:11] Sdk-Launcher> Launcher PID: 15884 [10:11] Sdk-Launcher> Error: This application is already installed on the device, uninstall it or temporarily change the name in the manifest.json file! [10:12] why can't QtC not install over the existing .click? [10:12] dpm_: because when you press stop, it uninstalls the click package [10:12] dpm_: so you could end up with your reminders app uninstalled from the phone [10:13] dpm_: exactly like nik90 said [10:13] well, but then I need to drop to the command line to uninstall apps? [10:13] why? [10:14] dpm_: can't you instead append ".devel" to the application name in the manifest file [10:14] dpm_: tht should let QtC install and uninstall properly [10:14] nik90, how should I know as a developer that I need to append .devel to the manifest? [10:15] dpm_: because the error message tells you [10:16] dpm_: we are working on a solution for that, temporary installs but that will take some time [10:18] zbenjamin_, in any case, I still can't launch it, even after uninstalling reminders manually: http://pastebin.ubuntu.com/8402452/ [10:19] dpm_: you cannot uninstall reminder, its preinstalled [10:19] dpm_: change the name in the manifest file [10:19] zbenjamin_, click unregister seemed to uninstall it, it didn't complain and I can't see the app anymore [10:20] click list --user=root and it will still be there [10:21] zbenjamin_, which field do I need to change in the manifest? [10:21] dpm_: i think i always used the "name" field [10:21] same, just changing the "name" field should be sufficient [10:21] dpm_: sorry for the extra step, but until click supports temporary installs it has to work this way [10:23] zsombi: ping [10:24] nik90: pong [10:24] zsombi: hey, I found a bug in timepicker which affects clock and calendar bug 1371694 [10:24] bug 1371694 in Ubuntu UI Toolkit "TimePicker behaves erratically after changing system timezone" [Undecided,New] https://launchpad.net/bugs/1371694 [10:25] nik90: TZ support was not included in the DatePicker, so no wonder you get that bug [10:25] zsombi: are you by chance using the javascript date() object? It cannot handle timezone changes dynamically [10:25] thanks zbenjamin_ [10:25] dpm_: np [10:26] nik90: JS Date object does handle TZ changes [10:26] nik90: as QML eztends that type [10:26] extends [10:26] nik90: http://qt-project.org/doc/qt-5/qml-qtqml-date.html [10:26] zsombi: exactly but it doesnt. Me and mzanetti reported a bug upstream about js date returning the wrong time in qml [10:27] * nik90 finds the link [10:27] nik90: so Date.timeZonerUpdated doesn't? [10:27] mzanetti, I'm testing the reminders app with the evernote300 account. The optimizations work well with scrolling the list of notes and loading the previews. I've managed to freeze the app, though, after scrolling a few times, then clicking on a note. It loaded the note, but on clicking on the "Back" button in the header, it just froze. [10:27] Let me see if I can see anything in the logs [10:27] dpm_: hmm... yea, some reliable steps to repro might be useful if you can manage [10:28] nik90: actually that is a slot, not a signal...http://qt-project.org/doc/qt-5/qml-qtqml-date.html#timeZoneUpdated-method [10:28] zsombi: https://bugreports.qt-project.org/browse/QTBUG-40275 [10:29] nik90: looks liek it is not proggressing... [10:29] mzanetti, yeah, let me try again, but I didn't see anything useful in the log: http://pastebin.ubuntu.com/8402487/ [10:30] zsombi: that's why the clock app created a QDateTime class instead of using the qml js date() object. We then return the timestring that retains the timezone [10:30] nik90: well... good for you :) [10:31] nik90: I cannot really do that in teh toolkit, as we then must introduce an API which might be dropped in no time if the Qt bug is fixed... [10:31] true [10:31] nik90: then we have an API to maintain forever... forever in [now..whoknowstillwhen] interval [10:32] zsombi: I guess in the clock app, I should ask users to restart clock app when they change timezone [10:32] ehh.... [10:32] nik90: ugly... [10:32] zsombi: can't do much :/ since the datepicker simply doesn't work after changing timezone. So have to ask users to restart clock [10:33] nik90: I was looking today for a way to extend Date API actually, as part of moving all QML files to qrc in plugin [10:33] nik90: the problem is that Date is an elementary type, implemented in V4... so not much choice on extending it... [10:34] yeah [10:41] nik90: there would be one way if we'd have that Time component ready, because that would also be able to notify a running app about TZ change... but it won't affect the Alarm App while tombstoned [10:48] zsombi: what Time component? [10:48] nik90: this one https://blueprints.launchpad.net/ubuntu-ui-toolkit/+spec/time-component [10:49] ah yes [10:53] Mirv: btw I have been testing the AGPS in the clock app successfully from image 246 and onwards. I get a location fix in less than 10 secs === Acn0w- is now known as Acn0w [11:19] zbenjamin_, when I get this for an app when running it from QtC, what does it exactly mean? [11:19] Sdk-Launcher> Received a failed event [11:19] Sdk-Launcher> The Application exited, cleaning up [11:19] Sdk-Launcher> Finished [11:19] i.e., I'm not sure what a "failed event" is [11:19] dpm_: there are different event types from upstart [11:20] dpm_: in this case it sent "App closed, reason=failed" or something like that [11:22] mzanetti, I'm getting this when running your branch from QtC on a device ^. The steps to reproduce are a bit vague, but I've been able to do it the 2 times I've started the app. Just load the app with the evernote300 account and start scrolling up, down and clicking on notes to see their content. At some point, I get that message from QtC and the app is stopped ^ [11:24] dpm_: that probably means it segfaulted then [11:24] dpm_: is there nothing more before the failed evend? [11:24] dpm_: sadly debugging qt apps with the gdb debugger version we have on the phone is broken [11:25] zbenjamin_, no, I just get http://pastebin.ubuntu.com/8402487/ [11:25] ok :/ [11:40] popey: when you are back, can you test the click packages I added to dropbox? The folders are named after the MP at https://code.launchpad.net/~ubuntu-clock-dev/ubuntu-clock-app/utopic-3.0/+activereviews [11:41] sure [11:43] popey, http://people.canonical.com/~dpm/click/com.ubuntu.reminders.devel_0.5.252_armhf.click [11:44] k [11:45] popey, do you happen to know how to install unsigned packages? [11:45] --allow-untrusted [11:45] I'm getting an error about unsigned package when I try to manually install that [11:45] ok [11:45] ya [11:45] perfect, thanks :) [11:46] hey i'm out [11:46] see you tomorrow [11:46] o/ Akiva-Thinkpad [11:47] \o oh btw popey, in the terminal app; are you using Q_INVOKABLE to use c++ functions in qml? [11:47] pass [11:47] without looking... [11:48] okay cool beans (assuming pass means "Not off the top of my head") [11:48] dpm_: uh, i have two reminders icons now [11:48] com.ubuntu.reminders.devel 0.5.252 [11:48] com.ubuntu.reminders 0.5.248 [11:48] popey, sorry: http://people.canonical.com/~dpm/click/com.ubuntu.reminders_0.5.252_armhf.click [11:48] heh, lolz [11:48] I forgot to revert the change in the manifest [11:48] k, ta [11:51] nik90: great news! I think rtm is still missing the rtm landing-001 from tvoss, but after that it should be equal [11:51] Mirv: :) [11:56] dpm_: thats much quicker! [11:57] popey, indeed, I'm testing it for a third time, now installed manually instead of from the SDK, and I've not managed to see the crash [11:58] opening notes is slow [11:58] zsombi: bug 1370649 [11:58] oh, seems not to be pulling down all the content [11:58] bug 1370649 in Ubuntu UI Toolkit "Reset an alarm doesn't return the properties to their default values" [Undecided,New] https://launchpad.net/bugs/1370649 [12:02] цруку ещ пуе зфыыцщкв ащк гигтег-ещгср уьгдфещк, [12:02] ops [12:02] where to get pass for ubuntu-touch emulator [12:02] ? [12:02] 0000 [12:02] ok [12:03] when you create the emulator it says Setting up a default password for phablet to: '0000' [12:03] so, where it stored? some wiki or? [12:03] mzanetti: hi, sorry I had not much time and ideas for the game recently :( [12:04] mivoligo: no worries [12:05] dpm: i am seeing no events at all in my calendar from either of my google accounts, on either device.... [12:05] oh, now they appear, when I tell you that! [12:05] popey: there is some lag in loading events, rpadovani has already filed bug [12:05] mivoligo: I have make quite a bit improvments and fixes in the meantime [12:05] popey: i wonder now is it , EDS or Calendar issue ? [12:06] omg, it working after emulator restart, finally! [12:06] need to trace it.. [12:06] mzanetti: I have to pull then [12:06] coderus: yay [12:06] thank you :) [12:07] mzanetti: what I plan next is the „welcome” screen and the icon, later on I'll get back to level backgrounds [12:07] mzanetti: if that's ok [12:07] popey: hmmm..it works after switching views. [12:07] mivoligo: that's great! [12:08] mivoligo: I'm afk now for a bit but will be back in ~1 hour [12:08] mzanetti: ok [12:08] mzanetti: I'll just leave couple questions for you [12:10] mihir: I have had that issue as well. When open the calendar app the month view is empty. However on switching view and returning to month view, it is populated [12:11] mihir: can you ask kunal to look into it. It is quite important [12:11] nik90: i too had...i don't see any issue on console too..and it happened previously too i believe [12:12] mihir: i think the event model is simply not being loaded properly. I don't expect to see error messages in console [12:14] nik90: i believe this merge is causing issue, still not sure...https://code.launchpad.net/~pkunal-parmar/ubuntu-calendar-app/IsLoadingNew/+merge/234315 [12:15] because it has added timer if you see === _salem is now known as salem_ [12:17] nik90: what do you think ? [12:17] mihir: I am not sure..I am not familiar with the calendar core code which deals with the event model and QtOrganizer [12:17] mihir: part of the reason why I havent touched it :P [12:18] nik90: :| :-\ [12:18] mzanetti: Answer when you have time: have you decided if more levelpacks will be in the game? That would tell me if I should make a general „tower defence” icon or „machine vs machine” specific. === salem_ is now known as _salem [12:31] dholbach: hi, i have a web app has published to app store and be updated with using webapp-container instead of webbrowser-app as your comment. but i just found the server side detects the webapp-container is a mobile version browser but it serves desktop version only. do you have any advice how to deal with it? I can't see how to set UA to webapp-container. thanks [12:33] shuduo: hi [12:34] shuduo: dholbach indicates that the switch to webapp-container results in your app getting the /desktop/ version? [12:37] dbarth_: i guess dholbach use script to check the app and the result is switching to webapp-container [12:38] dbarth_/shuduo, I think this is the policy change from 14.04 to 14.10 frameworks(?) [12:39] dholbach/dbarth_, the text in review email: desktop_Exec_webbrowser_13.10 (example) [12:39] may not use 'webbrowser-app' with framework 'ubuntu-sdk-14.10-html-dev2' [12:39] yes [12:39] what happens if you change it to webapp-container in the Exec line of the .desktop file? [12:41] dholbach: the web server side asks me visit on computer browsers [12:41] dbarth_, ^ is this something with the user agent string? [12:41] shuduo, which site is it? === boiko_ is now known as boiko [12:42] dholbach: https://wx.qq.com [12:43] dholbach: i see oSoMoN replied on https://bugs.launchpad.net/ubuntu/+source/webbrowser-app/+bug/1328183 [12:43] Launchpad bug 1328183 in webbrowser-app (Ubuntu) "User-Agent string results in poor UX on web" [Undecided,New] [12:43] thanks === _salem is now known as salem_ [12:46] shuduo: i confirm that the use of webbrowser-app for webapps is deprecated for some time now (6 months or so) [12:46] shuduo: now, that doesn't explain why your app serves the desktop version [12:46] webbrowser-app and webapp-container share the same UA [12:47] and that UA is a mobile one on mobile devices [12:47] dbarth_: maybe web server side changed its behavior [12:47] shuduo: are you maybe testing from your desktop? [12:47] ie, using webapp-container on your desktop [12:47] in which case the UA is dynamic, and would send a desktop version [12:48] dbarth_: webapp-container works as expected on desktop [12:50] dbarth_: so i need pretend a desktop version on mobile device. i see oSoMoN inspire me the UA can be set with user-agent-override in manifest. i need a doc or example for it now. [12:51] mivoligo: hey, I think I'd like to have something in the game to at least try to motivate people to create new level packs [12:51] mivoligo: that means, in the main page I'd probably like a button that brings you to a tutorial on how to create them [12:52] mivoligo: regarding the icon I guess I would be happy if we could have something that fits a bit to my other apps [12:53] mivoligo: look here: http://developer.ubuntu.com/pioneers and you'll see my others. [12:53] mivoligo: if you have better ideas I won't restrict you to this kind of design. just an idea [12:56] shuduo: let me get back to you about the doc [12:56] shuduo: can you howver confirm that you send the right UA to your server? [12:56] dbarth_: thanks [12:56] shuduo: you can use http://myhttp.info/ to verify [12:57] dbarth_: i did not intend to send any UA now. i just use a simple manifest. === TooLmaN_ is now known as TooLmaN [13:00] dbarth_: i can't login device by adb shell with recent rtm image. is it expected? now seems no simple way to verify app on device directly, right? [13:03] renatu: ping [13:04] gerlowskija, hi [13:06] dbarth_: i think the UA report from webbrowser should be same as webapp-container of my webapp since i did not override it. [13:06] renatu: Hi renatu! I'm working on a bug I found in the calendar-app, and I think the root cause is in qtorganizer5-eds (though I'm not entirely convinced). [13:06] gerlowskija, what is the problem? [13:07] Since you're familiar with that piece of the code, would you mind taking a look at the bug report and see if what I said there makes any sense? [13:07] https://bugs.launchpad.net/ubuntu-calendar-app/+bug/1364653 [13:07] Launchpad bug 1364653 in Ubuntu Calendar App "Daily Recurring Events need refresh to appear when created from DayView" [Medium,New] [13:08] A summary is: when I add a recurring event in the calendar-app, the onModelChanged signal is never emitted. I'm not sure if this is a QML/app problem, or something with the plugin [13:08] mzanetti: I see your icons are nice and simple [13:09] mzanetti: I was planning something more fancy as it is a game [13:11] gerlowskija, let me see if I have tests for that [13:12] mzanetti: I've pulled the latest revision and I see nothing on the level selection window http://screencloud.net/v/rAq8 [13:14] shuduo: yes [13:15] mivoligo: did you run the setupdata script again? [13:15] mzanetti: yes [13:15] strange... let me try [13:15] renatu: Ok, thanks for checking. Is it the qtorganizer plugin code that's responsible for triggering/emitting that signal? That's what I thought at first but I couldn't find any code that triggered it... [13:16] mivoligo: feel free to create an icon as you see fit. you're the design boss [13:16] dbarth_: the UA of browser on device is 'Mozilla/5.0 (Linux; Ubuntu 14.04 like Android 4.4) AppleWebKit/537.36 Chromium35.0.1870.2 Mobile Safari/537.36' [13:17] mivoligo: to answer your question: Yes, I hope people will create new level packs and we can ship them with the app [13:19] mivoligo: works for me. please try to do this in qtcreator: [13:19] clean project, run cmake, build [13:20] nik90, you about? [13:21] balloons: yup [13:21] nik90, I saw you tried the feedback app, but I see three duplicate responses. I'm seeing similar duplicated results from others. Can you describe what happened while using the app? [13:22] balloons: ah sure. When I pressed submit, I got an error message saying it couldn't send it. So I tried again. [13:22] In v2 I tried to prevent duplicate responses but now they seem everywhere :-) [13:22] did you ever get a successful send? [13:22] nope [13:23] balloons: I wiped my phone, but can try again and provide the exact message I got [13:23] ahh, I suspected as such. So my logic is broken.. It worked each time it told you it did not [13:23] gerlowskija, could you create a small qml code that shows the problem and attach it to the bug? [13:23] nik90, I assumed it said network issue, try connecting and try again [13:23] I think soo..1 sec [13:24] gerlowskija, I did not find the problem on c++ code, and all the tests is working nice, I need to go deeper on that to find the problem [13:24] balloons: Error: Check network connection and try again [13:24] mzanetti: not working :( [13:25] nik90, bingo.. I would love to see the command line output of that to see what response you get [13:25] nik90, is your phone in english? [13:25] balloons: yes phone is in english [13:26] renatu: Ok, I'll try trimming things down to a small snippet I can put on the bug. Can you point me at the test you were referring to (just for my own curiosity?) [13:26] balloons: http://paste.ubuntu.com/8403208/ [13:27] nik90, thank you much, that's helpful [13:27] gerlowskija, my c++ unit tests on https://code.launchpad.net/~phablet-team/qtorganizer5-eds/trunk [13:27] balloons: also I noticed that when the OSK is visible, I cannot scroll the UI to reach the submit button [13:27] balloons: you need to use a Flickable [13:28] renatu: ok, thanks for helping me look at this. I'll post a small snippet in an hour or two..have to log off and take care of a few things first [13:32] nik90, that I don't think I know how to do properly [13:33] balloons: got the code lying around some where? Should be an easy MP of about 20-30 lines of code [13:42] nik90, I pushed the bugfix for not being able to submit to the store. Give it a few mins and look for the update if you would. I'd like to make sure you can submit it :-) [13:43] sure np [13:43] nik90, yes the code is in lp:~nskaggs/+junk/feedback-app [13:43] it doesn't have a real home yet [13:44] go as wild as you like, I'm sure there's many things you would change, haha [13:44] :) [13:46] jdstrand, ping [13:51] balloons: works [13:55] nik90, good, so at least no more showstopping bug :-) [13:55] many thanks for the debugging [13:55] balloons: yup..although someone already commented before the fix :/ [13:56] balloons: btw is it okay if I move the submit button to the header like all other apps do? [13:57] nik90, I actually wanted to do that [13:57] oh cool [13:57] nik90, but yea, go for it. .I'm happy to include whatever nice tweaks you can offer [13:58] it's not a designed UI persay :-) [14:11] ahayzen: hey [14:12] jdstrand, in regards to bug 1315386 ... we could just limit to importing to only ~/Music/Imported (non translated) ? would this be an acceptable solution? [14:12] bug 1315386 in Ubuntu Music App "music-app should run under confinement under click" [Medium,Triaged] https://launchpad.net/bugs/1315386 [14:13] jdstrand, and would the permission you stated in the comment allow for us (content-hub) to create the Imported folder if it didn't exist? [14:13] ahayzen: so, we would add @{HOME}/Music/Imported to write_path in the security policy. that is better, but that is still not the ideal since it will have to be manually reviewerd [14:14] ahayzen: content-hub doesn't run under the app's confinement, so it can create it [14:15] I think what is missing is a way for 3rd party media apps to hook into the system directories [14:15] jdstrand, ok good.... the idea of a symlink sounded interesting as well but how could we get that to work? and would that work with multiple apps? [14:15] yeah [14:16] I think for now, @{HOME}/Music/Imported is as good as we are going to get [14:16] jdstrand, ok i'll mod it so we always push files into Imported (with no translation) ... and then have a play about putting confinement back on [14:17] jdstrand, thanks for your suggestions [14:17] cool, thanks [14:22] nerochiaro: btw... I merged you branch on tagger. thanks [14:22] mzanetti: thanks for merging it [14:22] nerochiaro: well, I reworked the whole build system to cmake so we can now build/run it with the SDK [14:22] \o/ ! [14:22] while doing that, I incorporated your changes [14:24] elopio, ping === chihchun is now known as chihchun_afk [14:35] jdstrand, are things like this expected in the logs when running confined? libust[8045/8054]: Error: Error opening shm /lttng-ust-wait-5-32011 (in get_wait_shm() at lttng-ust-comm.c:886) [14:35] ahayzen: pong. [14:35] ahayzen: yes. lttng is not allowed to confined apps [14:35] that is perfectly normal [14:36] (it unfortunate that it is in the logs) [14:36] jdstrand, ok thanks ... is it something "upstream" to us that is causing it? [14:36] elopio, I started investigating why ms2 doesn't work with our fixtures... [14:36] This line looks like a possible lead http://bazaar.launchpad.net/~mediascanner-team/mediascanner2/trunk/view/head:/src/daemon/scannerdaemon.cc#L128 [14:36] elopio, As this is fixed even if you change your HOM [14:36] >>> os.environ["HOME"] = "/tmp" [14:36] >>> print(os.environ.get("HOME")) [14:36] >>> GLib.get_user_special_dir(GLib.USER_DIRECTORY_MUSIC) [14:36] '/home/andy/Music [14:36] ahayzen: it is nothing you are doing wrong. it is part of the platform [14:36] elopio, This then means when ms2 spins up it doesn't see the tmp Music folder we have created. [14:36] jdstrand, cool thanks === chihchun_afk is now known as chihchun [14:37] elopio, does ^^ sound plausible? [14:38] ahayzen: I see. It sounds you are right. But those directories generally are relative to $HOME. [14:38] ahayzen: can you try setting the HOME with initctl ? [14:39] initctl --set-env HOME=/tmp --global [14:39] elopio, yeah thats what i thought but when playing about in python i couldn't get it to change.... ok i'll try that thanks [14:39] wait, it's not --set-env [14:39] elopio, and you would expect for us to have to restart the service right? ... eg do a $ stop mediascanner-2.0 and then start or a restart ? [14:40] initctl set-env [14:40] ahayzen: yes, I suppose that would be needed. [14:40] elopio, ok let me try this again in my VM [14:40] ahayzen: actually, I don't expect you to do anything. I expect the mediascanner devs to start working on the testability helpers as soon as RTM is done. [14:41] I'm looking for support from management on this request. [14:41] elopio, idk why the current mocking is failing on device since #244 ..but i'm hoping if we can get this to work it'll work on device as well [14:41] elopio, yeah proper helpers would be useful..i spotted how they do it in c++ .. but couldn't see any way of doing it in python? http://bazaar.launchpad.net/~mediascanner-team/mediascanner2/trunk/view/head:/test/test_qml.cc [14:43] ahayzen: that's cool. If they just need to expose what they are doing on their own tests, maybe it will be quick for them. [14:43] elopio, hopefully [14:43] store.insert. That's the kind of things I'd like to see us using. [14:45] elopio, yeah same === chihchun is now known as chihchun_afk === chihchun_afk is now known as chihchun [14:56] jdstrand, which log do i look at these days to see apparmor denials? [14:57]